Professional Documents
Culture Documents
Tty Cable For s5 PLC - Siemens - Plcforum - Uz.ua
Tty Cable For s5 PLC - Siemens - Plcforum - Uz.ua
1 of 2
http://plcforum.uz.ua/viewtopic.php?f=1&t=3294&start=0&view=print
plcforum.uz.ua
http://plcforum.uz.ua/
Author:
Page 1 of 1
Post subject:
To use an USB-converter with a SIEMENS RS232C - TTY interface or other is not
functional because the signal which goes out the converter is not compatible with
the signal which goes in the rs232c-tty interface.
Author:
11/12/2015 16:12
2 of 2
http://plcforum.uz.ua/viewtopic.php?f=1&t=3294&start=0&view=print
hi ,
the problem for comunication usb - rs232 is :
1) which is the version of step5 and windows you have?
all the version for step 5 run in dos mode with emulator for windows, and you can
see the windows in the step5 but run in dos mode, ( i not test the last version step5
v7.23 for win XP ) but the other all run in dos mode with emulador for windows and
the dos software can not abble the usb port and no go on-line with the plc s5 .
You understand , the problem is the software must be can run in windows mode ,
the only software manager the usb port is windows and not dos !
You must try with the last version on step5 v 7.23 and windows xp sp1,
i not try , but you can make the test!
best regards, pichi burich
Author:
Post subject:
Thanx burich
I use WinXP with SP2 and IBHSoftec's: S5/S7 for Windows.
Page 1 of 1
11/12/2015 16:12