Sl. No. Item No. Item Description Unit Qty Rate Rate Amount Amount (In Figure) (In Words) (In Figure) (In Words)

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Sl. No. Item No.

17

Item Description

Unit

Qty

Rate

Rate

Amount

Amount

(in Figure)

(in words)

(in Figure)

(in words)

NS-17 Design, manufacture, supply, installation, testing and


commissioning of panel Outdoor Type Panel KIOSK
Type
for power distribution, in weather proof
enclosurewith suitable protection, fixed on floor over
masonary pedastal or MS angle iron frame as required
and as per the direction of Engg - in - charge, fabricated
out of 14 SWG CRCA sheet steel. The sheet steel shall
undergo minimum 9 tank treatment followed by finishing
powder coating of min 60 micron thickness. The board
includes 415 V electrolitic Aluminium Bus Bar, removable
gland plates, cable alleys, including connection with
t i f d
ll
t
i
b l
a
EXTERNAL
FEEDER-Il t i
INCOMER:
1 Nos.-400 AMP TPN MCCB
BUS BAR:
500 AMP, 500 Volts, 3 phase 50 HZ TPN high
conductivity electrolytic Aluminium bus bar. The current
density of bus bar shall be minimum 1.00 sq mm / amp.
OUTGOING:
4 No 125 AMP TPN MCCB
2 No 32 AMP TPN MCCB
SET
b

EXTERNAL FEEDER-II
INCOMER:
1 Nos.-100 AMP TPN MCCB
BUS BAR:
125 AMP, 500 Volts, 3 phase 50 HZ TPN high
conductivity electrolytic Aluminium bus bar. The current
density of bus bar shall be minimum 1.00 sq mm / amp.
OUTGOING:
2 Nos 63 AMP TPN MCCB

Signature of Tenderer

204

Signature of Accepting Authority

Sl. No. Item No.

Item Description

Unit

Qty

Rate

Rate

Amount

Amount

(in Figure)

(in words)

(in Figure)

(in words)

5 Nos 32 AMP TPN MCCB

SET

SET

SET

EXTERNAL FEEDER-V
INCOMER:
1 Nos.-400 AMP TPN MCCB
BUS BAR:
500 AMP, 500 Volts, 3 phase 50 HZ TPN high
conductivity electrolytic Aluminium bus bar. The current
density of bus bar shall be minimum 1.00 sq mm / amp.
OUTGOING:
2 Nos 250 AMP TPN MCCB
3 Nos 63 AMP TPN MCCB
2 Nos 32 AMP TPN MCB

HIGH MAST PANEL-I (TPHM-1)


INCOMER:
1 Nos.-63 AMP TPN MCCB
BUS BAR:
100 AMP, 500 Volts, 3 phase 50 HZ TPN high
conductivity electrolytic Aluminium bus bar. The current
density of bus bar shall be minimum 1.00 sq mm / amp.
OUTGOING:
2 No 40 AMP TPN MCB
1 No 25 AMP TPN MCB

HIGH MAST PANEL-II (TPHM-2),


INCOMER:
1 Nos.-40 AMP TPN MCB
BUS BAR:

Signature of Tenderer

205

Signature of Accepting Authority

You might also like