Professional Documents
Culture Documents
Dash Q8 400 - System Panel Guide
Dash Q8 400 - System Panel Guide
PILOT/PRO EDITIONS
Version 1.0
Contents
1. Introduction .................................................................................................. 3
2. General usage ............................................................................................. 4
3. Network connection and the Configuration file ............................................. 5
4. Extending the System Panel application ...................................................... 6
1.
Introduction
2.
General usage
The application screen is sectioned into "tabs", 1 tab per system. When clicking
on the tab, system components will be presented in schematic form.
component inactive
Green outline
Red outline
Clicking with left mouse button selects the component for subsequent failure
selection (if supported). The list of failures can then be selected from the failure
selection checkboxes on the right bottom side of the screen. Depending on the
failure logic, it might be possible to select several failures at once. Once
activated, the failure status for the component is instantly transmitted to the
MJC8Q400 aircraft. Clicking on a component with a single available failure type
will instantly trigger the failure.
3.
SYSTEM
PANEL
127.0.0.1
127.0.0.1:49240
0.0.0.0:49240
UDP
0.0.0.0:49230
127.0.0.1:49230
MJC8
Q400
<IP ADDR1>
SYSTEM
PANEL
<IP ADDR2>:49240
0.0.0.0:49240
UDP
0.0.0.0:49230
<IP ADDR1>:49230
MJC8
Q400
4.