Professional Documents
Culture Documents
AAI Previous Papers: Technical
AAI Previous Papers: Technical
AAI Previous Papers: Technical
Hi friends i have written the exam conducted by AAI for the post JE( ELECTRONICS).
Test consists of total 100 questions.The paper consists of General
Aptitude,Reasoning, GK,and techincal questions. Some the questions I got in my
paper are...
TECHNICAL:
1) The radiation pattern of yagiuda antenna?
2)Function of synchro?
3)Voltage feedback gives?
4)bcd value of 001100100001?
5)questions on micro controller pins?
6)simple questions on logic gates?
7)simple problems on rlc networks?
8)function of RAM?
9)hall effect is used to measure?
10)in RC phaseshift oscillator a condition to get oscillations is
hfe>=
4K+23+29/K...
11)directivity of half wave dipole is....1.64..
12)READY signal is used in MP becoz of slow devices connected.....
13)TRAP is non maskable interrupt.....
14)value of threshold voltage?
15)function of magnetron?
GK:
1) RIGHT TO EXPRESS COMES UNDER WHICH ARTICLE?
2) QUESTION ON COUNTRY CURRENCIES?
3) QUESTION ON MULTI PURPOSE DAMS?
---------------------------------------------------------------31 Oct 2010, Delhi
Hi Guys,
Myself Gaurav Rathore, i attend manager Electronics paper on 31-10-2010.
Points
Format:
1. General knowlege
2. Reasoning
3. English (appropriate words, synonyms, antonyms, error correction)
4. Techincal (All subjects of electronics, basically from op-amp around 10 question,
communication, control, analog electronics around 10-12 questions, power electronics
around 6-8 questions) the all techincal question should prepare for gate trend because
question were easy but calculative, time consuming & some were easy, just and tick.
Kindly mail if more specific you need.
gaurav7.rathor@gmail.com
All the very best!
Cheers
Gaurav Rathore
General Knowledge
Reasoning
English
Technical round
Hi Buddies,
Hope my contribution will help you to a little extent for the persons who are appearing for AAI
junior executive (Electronics). Paper consisting of 100 questions should be answered in a time
duration of 12 hours. Paper consisted of 25 gk and 75 technical questions.
GK: Absolutely tough and unexpected questions covering Indian &world geography, Indian
polities, Economy and aptitude questions are given and aptitude consisted of puzzles and
alphabetic problems.
And coming to technical paper.
1. Hall effect is used to determine? Ans type of the conductor.
2. Questions based on cb, cc, Ce configurations?
3. Questions based on voltage amps?
4. Max efficiency obtained from class A amplifier? Ans 50%
5. To transmit a signal of 1000 Hz among these which type of filter is used? Ans all pass
6. Major questions came from antennas, waveguides, microwave oscillators, mw strips, mw
devices, and etc?
7. Phase shift required for oscillations? Ans 0 or 90
8. About wave propagation in different layers?
9. Radiation pattern of antennas?
10. Questions on op and ip resistances of feed back amps?
11. Questions on jfet?
12.1 Question on scr?
13.1 Question on slot antenna?
14. Question on range of a radar?
15. Based on filters?
Friends these are the questions which i remembered up to my knowledge, please excuse if there
are any mistakes.
All the best guys.
4 July 2010
Hi Friends,
I have written the exam of AAI for JE(Electronic). The paper consists of general aptitude,
GK, and techincal questions. Some the questions, i got in my paper are.
1) Hall effect is used to measure?
2) A question on network?
3) ROM is non volatile storage device?
4) RAM is not used for long storage puprose because. When power is lost we loose the
memory?
5) Non programmable device is 8212?
6) 7400 is Quad NAND gate?
7) NMOS cutooff voltage?
8) Yagi uda antenna radiation pattern is?
9) Helical antenna is used in satellite becoz in RC phaseshift oscillator a condition to get
oscillations in hfe>= 4K+23+29/K. If there are 8 sections in RC phase shift oscillator then
each section has a phase shift of 45degrees directivity of half wave dipole is 1.64?
10) Voltage series has input impedance is high and output impedance is low?
11) READY signal is used in MP because of slow devices connected?
These are the TECHNICAL QUESTIONS asked for the Jr.Executive (ATC) held on 2012-2009 at Hyderabad.
syllabus is:
subjects covering General Knowledge, Intelligence, Reasoning, General English,
Electronics, Tele Communication, IT, Electrical, Physics, Mathematics, Computer
Science etc.
duration is TWO hours.
here are only technical questions asked in the paper, hope helpful for u...
1. question on Ruth's criterion.
2. charecteristic equation for stable state.
3. common collector amplifier (current, voltage relations...).
4. FET transconductance, Gm is directly proportional to...
5. at 3dB frfequency line, gain reduces to...
6. maximum distortion occurs in which amplifier?
7. class B pushpull amplifier suffers from...
8. Barkhausen's criterion for sustained oscillations..
9. low frequency response of RC coupled amplifier ( characteristics)
10. ideal operational trans conductance amplifier ( i/p & o/p impedance relations)
11. radiation resistance of folded dipole is ....ohms.
12. IC timer 555, low on pin4(reset), what happens?
13. decimal to binary conversion...
14. question on full adder circuit( no of i/p o/p digits)
15. ckt involving: oscillator -> divider -> schmitt trigger -> flip flop -> o/p= ? ( ->
represents followed by symbol )
16. a ckt: op amp ->diode and capacitor -> o/p; name the ckt?
17. pblm on binary adder ( 6 bit)
18. feedback factor is 0.1, forward gain of system is 10, sensitivity w.r.t f/b
element?
19. linux is implemented as?
20. feedback control system characteristics?
21. phased locked loop is used in ?
22. a pblm on random variables...
23. freq response char of ideal comm chnl..
24. best error performance for same avg energy per bit (options 16QAM, 16ASK,
16PSK, QPSK)
25. Tx band width od SSB?
26. nyquist interval..
27. r/n b/n spectral density &auto correlation fpor a periodic function.
a. Macro better that Sub Rtne with respect to storage time and execution time
b. Vice versa
c. Macro better that Sub Rtne with respect to execution time only
d. Vice versa
9. Which of the following is a privileged instruction?
a. MOV A B
b. INT 21
c. ADD A B
d. IN 08
10. Which of the following instruction is not converted to binary by an Assebly Language
Program?
a. TRAP
b. Interrupt
c. Privilige instruction
d. Sorry dont remember
11. In which type of machine can multiple tasks be done
a. Virtual Machine
b. Sorry dont remember
12. Which of the following has the highest distortion?
a. A
b. B
c. AB
d. C
13. Which of the following distortions occur in Class B push pull amplifier?
a. Harmonic
b. Intermodulation
c. Phase
d. Sorry dont remember
14. (s)/T(s) of a rotational system (J,B,k regular notaions)
15. Schmitt Trigger with 3V & 1V UTP and LTP respectively. A sinusoidal input with 10V
peak is fed as the input. The output swings between
16. Op-amp circuit given. Identify the circuit (Ans: Peak detector)
17. 6 bit binary ladder with 101001 as input ( 0= 0V , 1 = 10V). Output voltage is -----18. Doppler Radar of 1125 MHz. Frequency of received echo is 125 MHz. The conclusion is
a. Target also has a radar
b. Target moving away
c. Target approaching
19. Microprocessor cycles between
a. Fetch and Execution operations.
b. Fetch and Halt
20. Modulation index of an FM system with 2.5V, 500 Hz input and 5KHz deviation is
21. Rouths Criterion gives
a. Number of roots on the LHS of S plane
b. Number of roots on the RHS of S plane
22. For the system to be stable, the roots of the characteristic Equation must lie
a. Left side of the S plane
b. Right side of s plane
23. Impulse response h(t) of a system is
a. Inverse Laplace transform of Transfer Function
24. The output of a LTI system with Guassian process input is
a. Gaussian
b. Poisson
25. Spectral Density and Auto-Correlation are
a. Laplace Transform pair
b. Fourier Transform Pair.
26. A flex Klystron is a
a. Microwave amp
b. Microwave Oscillator
c. Both amp and Oscillator
d. High cavity tube
27. S Matrix related question.
28. Block diagram given
Oscillator(1MHz) Divider (/ 10^6) Schmitt Trigger Flip Flop . Output is
a. Pulse Train of width 1 sec
b. Pulse Train of width 2 sec
c. Pulse Train of width 0.5 sec
10.AGC is used in which of the stage a) receiver b) oscillator c) both a and b d) none of these?
11.Delayed AGC is used for which purpose?
12.Question based on the value of mirroring?
13.Question based on RAID.
14.Bridge is used for which of the OSI layer?
15. 5-6 questions are based on various OSI layer and TCP/IP.
16.Which type of feedback is used in amplifier a) +ve b) -ve c) both a and b d) none of these?
17.question based on i/p impedance of transmission line of a given wavelength.
18.What is three things for workstations of DNS server?
19.Which of the followinf is free-running?a)monostable multivibrator ,b)astable multivibrator,
c)both a and b, d) none of these?
20. 2-3 questions based on voltage and current source.
21. One question of VCO.
NOTE: There might be some mistakes as I don't remember the questions exactly.....
(D) Nicrome
23. A n-type semiconductor has excess of free electrons and a p-type semiconductor has
deficiency of free electron.
The semi- conductors are electrically
(A) positively charged and negatively charged respectively (B) negatively charged and
positively charged respectively
(C) both are electrically neutral (D) None of these
24.In zone refining section the purity achieved is better than
(A) 99.9% (B) 99.99% (C) 99.999% (D) 99.9999%
25.If the acceptor level is 0.16eV above the top of the valence band, the fractions of hole present
at 300 K is
(A) 6.10 * 10-4 (B) 2.05 * 10-3 (C) 5.01 * 10-3 (D) 9.23 * 10-4
26.Make the false statement out of the following
(A) Phosphorous has 5 valence electron
(B) Hole current is the movement of positive charges in the opposite direction from electron
flow
(C) The internal barrier potential at PN junctions for silicon is approximately 1.1 eV
(D) None of these.
27. All the materials with a basic unit, which has a center of symmetry i.e. starting from the
center and drawing a vector to one of the
surrounding ions, one finds a similar ion at a position. Corresponding to a vector of equal length
drawn in the opposite direction, are
known as
(A) Magneto striction (B) Piezoelectric (C) Electrostriction (D) None of these
28. The relative permeability of diamagnetic material is of the order of
(A) 1+ 10-5 (B) 10-5 (C) 1-10-5 (D) 105
29.The ferromagnetic curies temperature in degrees absolute for iron is
(A) 990 (B) 1428 (C) 631 (D)1043
30.Which of the following material is used for making permanent magnets
(A) Alnico V (B) Carbon Steel (C) Plantinum cobalt (D) All of these
31.If a number of domains are arranged such that no poles exists at the surface and no lines of
force go out of the material the
magnetostatic energy of a ferromagnetic material
(A) reduces (B) remains the same (C) increases (D) it may increase or decrease
32.On the application of an electric field, a polarisation process occurs as a function of time. the
polarisation p (t) as a function
of time t is given by
(A) P (t) = P/[exp(-t/tr) + 1] (B) P (t) = P/[1-exp(-t/tr)] (C) P (t) = P[1-exp(-t/tr)] (D) None of
these
33. A constant voltage generator has
(A) low internal resistance (B) minimum efficiency (C) high internal resistance (D) minimum
current capacity
34. which of the following is a low pass filter ?
(A) L type with series C and shunt L (B) T type with series L and shunt C
(C) T type with series C and shunt L (D) L type with series L and shunt C
35.With an indirectly heated cathode the heater voltage
(A) must be a steady d.c. voltage (B) is separate from the cathode circuit
(C) is applied to the cathode (D) is equal to the c-bias voltage
36.Which is single 8-input NAND gate ?
(A) SN 7430 (B) SN 7432 (C) SN 7440 (D) SN 7410
37. EZ-80 in radio is a
(A) full wave rectifier (B) audio amplifier (C) line output pentode (D) None of these
38.In LED, light is emitted because
(A) We make the light fall on LED (B) recombination of charges takes place (C) diode emits
light when heated (D) None of these
39.which of the following has the highest voltage gain ?
(A) CB (B) CE (C) CC (D) None of these
40.(i)Transistors on a monolithic linear IC unit are generally PNP on a silicon substrate
(ii) typical values of L integrated on a chip are 10 to 100 mH.
Indicate correct combination
(A) F, F (B) T, F (C) F, T (D) T, T
41. Bridge rectifiers are preferred because
(A) less peak inverse voltage (B) they require small transformer (C) Both (A) & (B) (D) None
of these
42.Triac is a
(A) 2 terminal unilateral switch. (B) 3 terminal bidirectional switch (C) 2 terminal bidirectional
switch (D) 3 terminal unilateral switch
43. SCS is a device which is
(A) physically smaller than SCR and operates at lower current and voltage (B) physically larger
(C) physically smaller but operates at high current and voltage as compared to SCR.
(D) physically larger and operate at high voltage and current
47.Cascade configuration is
(A) CE- CC (B) CE- CE (C) CE-CB (D) CE- CE
48.Class B and Class C operations are used in (respectively)
(A) tunned amblifiers (B) untunned and tunned amblifiers (C) tunned and untunned
amblifiers (D) untunned amblifiers
49. In Voltage series negative feedback R and R
(A) increases, decreases as compared to previous value (B) increases, increases (C) decreases,
increases (D) decreases, decreases
i
of
if
56. if the input resistance is reduced in tube amplifier then the power gain of the driving
amplifier for moderate feedback, and the
voltage gain respectively
(A) increases, decreases (B) both increases (C) both decreases (D) remain same
57.Conversion efficiency for class A and B respectively are
(A) 25, 50% (B) 50, 50% (C) 50, 25% (D) 50, 78.4%
58. cascade amplifiers are used in
(A) tunned amplifier design (B) video amplifier (C) voltage amblifier (D) power amplifier
59. The high frequency response of an amplifier can be determined from
(A) hybrid - T- model (B) h-parameter model of the amplifier (C) hybrid pie -model (D) None
of these
60.The dynamic impedance of a Zemer diode
(A) decreases with increase in current passing through it (B) increase with increase in current
passing through it
(C) is independent of current passing through it (D) None of these
61. Ripple factor (r) of an inductance can be calculated from the formula
(A) r = 2410/LRL (B) r = RL/1600L (C) r = 1600L/RL (D) None of these
62.The purpose of an amplifier is
(A) to increase voltage and current of an input signal (B) to introduce distortion in the signal fed
to it
(C) to attenuate the single fed to its point (D) to increase voltage current or power of an input
signal.
63.The standard aircraft frequency is
(A) 60 Hz (B) 50 Hz (C) 400 Hz (D) None of these
64. Conversion efficiency for the amplifier is signal power delivered
(A) n = to load / d.c power supplied to output circuit *100 (B) n = output power/input power
*100
(C) n = output circuit / signal power delivered to load *100 (D) None of these