Professional Documents
Culture Documents
Configuring Bridge Mode With WPA Encryption Using The Setup Wizard TH en
Configuring Bridge Mode With WPA Encryption Using The Setup Wizard TH en
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-2-
2 : (User Name)
(Password) admin
Log In
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-3-
3 :
SETUP WIZARD INTERNET CONNECTION
WIZARD Setup Wizard
1
2
4 : Wizard DSL-2750E
Next
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-4-
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-5-
6 :
1. Country :
2. ISP (Internet Service Provider) :
3. Protocol : Bridge
4. Encapsulation Mode : LLC
5. VPI : VPI
6. VCI : VCI
7. NEXT
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-6-
7 :
1. Enable Your Wireless Network
2. SSID
3. WPA-PSK WPA2-PSK Security Level
4. PRE-SHARED KEY (8-63 )
5. Next
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-7-
8 : admin
New Password
Skip
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-8-
9 : Apply
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-9-
Step 2: A login screen will appear, type in the User Name and Password as admin all in lower case
(This is the default setting, please enter the new username and password if you have changed it).
Click on the Log In button.
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-10-
Step 3: You are now at the DSL-2750E web interface. Click on the SETUP tab, select Wizard on the
left. Under INTERNET CONNECTION WIZARD, click on the Setup Wizard button.
1
2
Step 4: This wizard will guide you through a step-by-step process to configure your DSL-2750E to
connect to the Internet. Click on Next button.
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-11-
Step 5: From this section, you can enable or disable Daylight Saving and set the time zone that you
are in and set the NTP (Network Time Protocol) Server. You can also adjust the time through 'Manual
setup time' when needed. Click Next to continue.
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-12-
Step 6: The next step is to Setting up the Internet Connection, configure the following;
1. Country: Select the country where you are currently located
2. ISP (Internet Service Provider): Select from the drop down box the name of the
service provider who provide the Internet Connection
3. Protocol: Select Bridge
4. Encapsulation Mode: Select LLC
5. VPI: Enter the VPI required by the Internet Provider (ISP)
6. VCI: Enter the VCI required by the Internet Provider (ISP)
7. Click on the Next button.
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-13-
Step 7: The next step is to Setting up the Wireless Network, configure the following;
1.
2.
3.
4.
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-14-
Step 8: The factory default password of this router is admin. To help secure your network, D-Link
recommends that you should choose a new password. If you do not wish to choose a new password
now, just click "Skip" to continue. Click "Next" to proceed to next step.
Step 9: Setup is now completed, click on the Apply button to save the settings.
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-15-
Call Center 02-6617997
: 9.00 . 18.00 .
Thai : Mon Fri : Time 9.00 18.00.
: , , 18.00 .
English : Sat Sun , Public Holiday and after 18.00 weekday.
Website : www.dlink.co.th
email: support@dlink.com.sg
Facebook : http://www.facebook.com/DLinkThailandFans
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00
-16-
FAQ: Configuring Bridge Mode with WPA Encryption using the Setup Wizard Version 1.00