Professional Documents
Culture Documents
Electronic Phase Shifter
Electronic Phase Shifter
EPS-1000A
Electronic Phase Shifter
Single-phase input
Field portable
DESCRIPTION
The EPS-1000A Electronic Phase Shifter is a fieldportable, self-contained, third-generation test set that
graphically displays the voltage configuration. It requires a
single-phase voltage input and provides a selectable
single-phase, phase-to-phase or three-phase voltage source
output for testing complex protective relays.
Model EPS-1000A graphically displays all selected voltage
and phase angle settings. This feature provides the unique
capability for the operator to visualize the voltage source
configuration while testing. The graphic screen displays
these voltages and phase angle settings along with an
extensive range of capabilities for modifying specific
testing applications.
APPLICATIONS
Model EPS-1000A is a compatible test set for testing threephase protective relays with SR-90, SR-76 and SR-51 test
sets. When used with a Multi-Amp relay test set, Model
EPS-1000A allows testing of a variety of complex relays.
The protective relays and their respective IEEE device
numbers are listed in the preceding table.
FEATURES AND BENEFITS
Graphically displays voltage and phase angles to visually
monitor the values for testing protective relays.
Single-phase; three-phase open delta; three-phase Tconnect; three-phase wye; and three-phase delta output
of both voltages and phase angles for testing virtually all
protective relays.
IEEE
Device
Number
Impedance
21
Synchronizing
25
Directional Power
32
Loss-Of-Excitation or Field
40
47
Directional Overcurrent
67
EPS-1000A
Electronic Phase Shifter
SPECIFICATIONS
Input Voltage
85 to 265 Vac
Reference Input
Current: 0.5 to 5 A
Voltage: 10 to 30 V
Output Frequency
50/60 Hz or sync to line 2 Hz
Internal Reference
Phase lock to crystal oscillator
Amplitude Regulation
Accuracy: Maximum 1%, typical 0.5%
Harmonic Distortion: <1%
Phase Variation
Accuracy: 2
Operating Temperature Range
32 to 113 F (0 to 45 C)
Overload Protection
Input: Fuse-protected
Power Supply: Overcurrent, under-voltage/overvoltage, thermal
Amplifiers: Current-limiting, thermal, fused
Storage Temperature
-20 to +158 F (-20 to +70) C
Dimensions
Model EPS-1000A
16.25 H x 24.5 W x 9.0 D in.
(413 H x 622 W x 229 D mm)
Phase Adjustment
Applicable for each phase to be set from 0 to 360
Allows operator to set positivesequence, negative-sequence and
zero-sequence fault conditions
Weight
EPS-1000A
39 lb (17.7 kg)
EPS-1000A with carrying case
46 lb (21 kg)
ORDERING INFORMATION
Item (Qty)
Cat. No.
Model EPS-1000A
EPS1000A
Item (Qty)
Cat. No.
15493
Fuses
Included Accessories
10 A [5]
11333
5 A [5]
11335
8 A [5]
962
0.0625 A [5]
987
15494
1282
6828
UK
Archcliffe Road Dover
CT17 9EN England
T +44 (0) 1304 502101
F +44 (0) 1304 207342
UNITED STATES
4271 Bronze Way
Dallas TX75237-188 USA
T 800 723 2861 (USA only)
T +1 214 330 3203
F +1 214 337 3038
15690
EPS_1000A_DS_en_V10
www.megger.com
Megger is a registered trademark