SJ-20140527134815-013-ZXG10 iBSC (V6.30.202) Radio Parameters Reference PDF

ZXG10 iBSC
Base Station Controller
Radio Parameters Reference

Version: V6.30.202
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://support.zte.com.cn
E-mail: 800@zte.com.cn
LEGAL INFORMATION
Copyright 2015 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited.
Additionally, the contents of this document are protected by
contractual confidentiality obligations.

All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit the ZTE technical support website http://support.zte.com.cn to inquire for related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No.
Revision Date
Revision Reason
R1.1
2015-03-10
Updated to V6.30.202f. For details, refer to the relevant release

notes.
R1.0
2014-07-30
First edition
Serial Number: SJ-20140527134815-013

Publishing Date: 2015-03-10(R1.1)
SJ-20140527134815-013|2015-03-10(R1.1)
ZTE Proprietary and Confidential
Contents
About This Manual ......................................................................................... I
Chapter 1 Guide to Reading This Manual ................................................ 1-1
Chapter 2 GSM Radio Parameters ............................................................ 2-1
2.1 GSM Logical Configuration(GBssFunction) .......................................................... 2-2
2.1.1 BSS ID .................................................................................................... 2-2
2.1.2 User Label ............................................................................................... 2-3
2.1.3 Managed Object Description ..................................................................... 2-4
2.1.4 Load indication allowed ............................................................................ 2-6
2.1.5 Load indication Valid Time ........................................................................ 2-7
2.1.6 Load Indication Period .............................................................................. 2-8
2.1.7 Send assignment failure allowed in outer direct retry procedure ................ 2-10
2.1.8 TFO Enable ............................................................................................2-11
2.1.9 Report voice quality ................................................................................ 2-12
2.1.10 R99 Ind................................................................................................ 2-14
2.1.11 DCS1800/PCS1900 support.................................................................. 2-15
2.1.12 External cell load notify ......................................................................... 2-16
2.1.13 Neighbor cell load valid duration ............................................................ 2-17
2.1.14 Pre-Access Control for IP Transmission ................................................. 2-18
2.1.15 Using load information provided by CRRM ............................................. 2-19
2.1.16 Automatic Resource Indication Threshold .............................................. 2-20
2.1.17 Access class parameter config select .................................................... 2-22
2.1.18 First barred class.................................................................................. 2-24
2.1.19 Barred class windows ........................................................................... 2-25
2.1.20 Barred time step................................................................................... 2-26
2.1.21 Access Control ..................................................................................... 2-28
2.1.22 Congestion Threshold for Send Load Indication...................................... 2-29
2.1.23 Forbid Handover According to Resource Threshold of Load Indication ..... 2-30
2.1.24 Resource Threshold of Load Indication for Forbid Handover ................... 2-31
2.1.25 Use system message method when MSC over loaded or link blocked...... 2-32
2.1.26 Start system message method for CPU overload.................................... 2-34
2.1.27 Start FUC flow control for CPU overload ................................................ 2-35
2.1.28 The maximum control level for MSC overload or link block ...................... 2-36
2.1.29 Start limit of system message method for CPU overload ......................... 2-37
I
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.30 Start limit of FUC flow control for CPU overload...................................... 2-38
2.1.31 B2 support AMR................................................................................... 2-40
2.1.32 If paging flow control due to high CPU ................................................... 2-41
2.1.33 CPU threshold of paging flow control ..................................................... 2-42
2.1.34 Radio pre-access procedure switch ....................................................... 2-43
2.1.35 Transport Pre-Access Flag.................................................................... 2-45
2.1.36 The switch of sending Immediate assign message and radio channel
activating synchronously........................................................................ 2-46
2.1.37 FO report for CS................................................................................... 2-47
2.1.38 FO report for PS................................................................................... 2-48
2.1.39 FO report for DBS ................................................................................ 2-49
2.1.40 Inter BSC handover out on SDCCH permitted ........................................ 2-50
2.1.41 The switch of connection and radio channel activating synchronization ..... 2-52
2.1.42 Use BER to average quality .................................................................. 2-53
2.1.43 Check IMSI when access ...................................................................... 2-54
2.1.44 Include BTS power in MR ..................................................................... 2-56
2.1.45 Measurement Result Recording Interval in MSC Invoke Trace................. 2-57
2.1.46 Preprocessed Measurement Result Recording Interval in MSC Invoke
Trace ................................................................................................... 2-58
2.1.47 Enhanced and Preprocessed MR report................................................. 2-59
2.1.48 Preferred speech version for FR ............................................................ 2-60
2.1.49 Preferred speech version for HR ........................................................... 2-62
2.1.50 Dynamic HR support indication.............................................................. 2-63
2.1.51 HR channel fragment finishing support................................................... 2-64
2.1.52 BCCH switch allowed ........................................................................... 2-66
2.1.53 Dynamic configuration SDCCH.............................................................. 2-67
2.1.54 Scan SDCCH ....................................................................................... 2-68
2.1.55 Scan BCCH ......................................................................................... 2-69
2.1.56 BCCH starting delay ............................................................................. 2-71
2.1.57 BCCH finishing delay............................................................................ 2-72
2.1.58 SDCCH->TCH delay............................................................................. 2-73
2.1.59 Minimum Tch reserved for dynamic SDCCH........................................... 2-75
2.1.60 Baseband frequency hopping TRX exchange support ............................. 2-76
2.1.61 Baseband resource share support ......................................................... 2-77
2.1.62 TRX Selection priority for baseband share ............................................. 2-78
2.1.63 Number of BA Ranges ......................................................................... 2-79
2.1.64 BA Range Lower ................................................................................. 2-81
2.1.65 BA Range Higher ................................................................................. 2-82
II
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.66 If get Utran classmark information from UE ............................................ 2-83

2.1.67 IPA AMR start mode ............................................................................. 2-84
2.1.68 Send OVERLOAD message to MSC...................................................... 2-86
2.1.69 Use Load of Subcell1 as Load of Cell .................................................... 2-87
2.1.70 Enough MS MR For Connection Failure After Handover.......................... 2-88
2.1.71 Ts Block Alarm Switch .......................................................................... 2-89
2.1.72 BVC Block Alarm Switch ....................................................................... 2-90
2.1.73 Allow assign according first measurement report when use cobcch ......... 2-91
2.1.74 Immediate assignment repeat ............................................................... 2-92
2.1.75 Switch of TRAU frame synchronized monitor.......................................... 2-94
2.1.76 Delay protection ................................................................................... 2-95
2.1.77 Busy threshold of sub cell ..................................................................... 2-96
2.1.78 Support of SON Transfer Application ..................................................... 2-97
2.1.79 Circuit data handover control................................................................. 2-98
2.1.80 Cell Bar when A break .......................................................................... 2-99
2.1.81 Send Paging CS on CCCH or not when PS instance exists ....................2-101
2.1.82 If support mute call detect ....................................................................2-102
2.1.83 Reassign enable .................................................................................2-103
2.1.84 Max times of reassign ..........................................................................2-104
2.1.85 Reassign level threshold ......................................................................2-105
2.1.86 whether using Frequency List describe channel frequency hopping of
assignment command ..........................................................................2-107
2.1.87 P value of MUTE SAIC MS capability detection .....................................2-108
2.1.88 N value of MUTE SAIC MS capability detection .....................................2-109
2.1.89 P value of SAIC AFC MS capability detection ........................................ 2-110
2.1.90 N value of SAIC AFC MS capability detection........................................ 2-111
2.1.91 EMI information on single-user report ................................................... 2-112
2.1.92 Support Mocn...................................................................................... 2-114
2.1.93 Ask IMEI When Cipher......................................................................... 2-115
2.1.94 Max ta and measure report times in LCS .............................................. 2-116
2.1.95 Use Reserved Channel........................................................................ 2-117
2.1.96 Include Priority in Paging ..................................................................... 2-118
2.1.97 BSC Sequence ................................................................................... 2-119
2.1.98 Period of emergency add TRX license ..................................................2-120
2.1.99 MS capability pairing priority 1..............................................................2-121
2.1.100 MS capability pairing priority 2 ............................................................2-123
III
SJ-20140527134815-013|2015-03-10(R1.1)

2.1.108 MS capability pairing priority 10 ..........................................................2-133
2.1.111 MS capability pairing priority 13...........................................................2-136
2.2 BSS Function Timer(GBssFunctionTimer) .........................................................2-141
2.2.1 BSS Function Timer ID ..........................................................................2-141
2.2.2 Protective time waiting for access...........................................................2-142
2.2.3 Protection time for link establishment response .......................................2-144
2.2.4 SAPI3 link establishment time ................................................................2-145
2.2.5 Protective time that responses external handover completion
message .............................................................................................2-146
2.2.6 External handover protective time ..........................................................2-148
2.2.7 Protective time for RF channel release ...................................................2-149
2.2.8 Starting time for oriented retry ................................................................2-150
2.2.9 Encryption mode modification time .........................................................2-151
2.2.10 Mode modification process time ...........................................................2-153
2.2.11 Continue timer for mode modify ............................................................2-154
2.2.12 First overload period of flow traffic control .............................................2-155
2.2.13 Second overload period of flow traffic control.........................................2-157
2.2.14 Immediate assignment period...............................................................2-158
2.2.15 Handover period of source cell .............................................................2-160
2.2.16 Assignment period...............................................................................2-161
2.2.17 TCH Channel release period ................................................................2-162
2.2.18 TCH Channel deactivation delay ..........................................................2-164
2.2.19 RLSD message receive protection timer ...............................................2-165
2.2.20 Channel activation protection timer .......................................................2-166
2.2.21 MSC clear command protection timer ...................................................2-168
2.2.22 SCCP connection protection timer ........................................................2-169
2.2.23 Time of micro-micro handover delay .....................................................2-170
2.2.24 TFI and USF release timer ...................................................................2-172
IV
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.25 TBF release timer................................................................................2-173

2.2.26 TBF protect time when radio link failure ................................................2-175
2.2.27 Bvc block/unblock retry time.................................................................2-177
2.2.28 Bvc reset retry time..............................................................................2-178
2.2.29 Suspend retry time ..............................................................................2-180
2.2.30 Resume retry time ...............................................................................2-181
2.2.31 Access capability update retry time.......................................................2-183
2.2.32 PFC creating retry time ........................................................................2-185
2.2.33 PFC modifying retry time......................................................................2-186
2.2.34 Supervision Timer of LCS ....................................................................2-187
2.2.35 Radio Timer of LCS .............................................................................2-189
2.2.36 LCS wait intra BSS handover timer.......................................................2-190
2.2.37 PS channel delay release timer ............................................................2-191
2.2.38 Ater wait SCCP connection timer..........................................................2-193
2.2.39 Ater wait resource acknowledge timer...................................................2-194
2.2.40 Ater wait resource timer .......................................................................2-195
2.2.41 Ater wait resource release timer ...........................................................2-196
2.2.42 Ater handover monitor timer .................................................................2-198
2.2.43 HO performed ack timer.......................................................................2-199
2.2.44 RIR Timer ...........................................................................................2-200
2.2.45 RI Timer..............................................................................................2-202
2.2.46 RIAE Timer .........................................................................................2-203
2.2.47 Time to wait A handover request ..........................................................2-204
2.2.48 Timer to wait a relocation commit MSG from RNC .................................2-205
2.2.49 Timer of TRAU frame Synchronization ..................................................2-207
2.2.50 Guards the PS handover required procedure ........................................2-208
2.2.51 Guard resource release after sending PS HO command ........................2-209
2.2.52 Time of waiting an internal HO command .............................................. 2-211
2.2.53 Round trip delay ..................................................................................2-212
2.2.54 IP Abis Wait Timer ...............................................................................2-213
2.2.55 synchronization timer that ensures source BSS receives both PS and
CS responses ......................................................................................2-214
2.2.56 synchronization timer that ensures target BSS receives both PS and
CS requests ........................................................................................2-216
2.2.57 T3197.................................................................................................2-217
2.2.58 Paging Interval ....................................................................................2-219
2.2.59 2G Load synchronized to 3G Timer.......................................................2-220
2.2.60 2G Cell Radio Resource Synchronization Timer ....................................2-221
V
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.61 Handover protecting timer to WCDMA/FDD...........................................2-222

2.2.62 SubCell Ping-Pang handover timer .......................................................2-224
2.2.63 Time of Cobcch wait for MR report........................................................2-225
2.2.64 SDCCH Channel release period ...........................................................2-226
2.2.65 SDCCH Channel deactivation delay .....................................................2-228
2.2.66 Protective time for reassigning procedure..............................................2-229
2.2.67 Mute call detect timer...........................................................................2-230
2.2.68 Timer wait for BTS start using dynamic TRX..........................................2-231
2.2.69 Wait reroute respond timer of CS..........................................................2-232
2.2.70 Wait reroute respond timer of PS ..........................................................2-233
2.3 BSS Function Handover Control(GBssHandoverControl) ...................................2-235
2.3.1 BSC Handover Control ID ......................................................................2-235
2.3.2 Handover synchronization indication support...........................................2-236
2.3.3 Internal redirection enable......................................................................2-237
2.3.4 Outer redirection enable ........................................................................2-238
2.3.5 BSC intracell handover enable ...............................................................2-240
2.3.6 SDCCH handover enable.......................................................................2-241
2.3.7 Handover request response ...................................................................2-242
2.3.8 Old BSS to new BSS information............................................................2-243
2.3.9 Queuing indicator in handover required message ....................................2-244
2.3.10 A+B solution for TD handover enabled..................................................2-246
2.3.11 Pingpong handover duration.................................................................2-247
2.3.12 Use N/P When Select Neighbour Cell for Pbgt Handover On Sdcch........2-248
2.3.13 Use N/P When Select Neighbour Cell for Pbgt Handover On Tch............2-249
2.3.14 Use N/P When Select Neighbour Cell for Uplink Quality Handover On
Sdcch..................................................................................................2-250
2.3.15 Use N/P When Select Neighbour Cell for Uplink Quality Handover On
Tch......................................................................................................2-252
2.3.16 Use N/P When Select Neighbour Cell for Downlink Quality Handover
On Sdcch ............................................................................................2-253
2.3.17 Use N/P When Select Neighbour Cell for Downlink Quality Handover
On Tch ................................................................................................2-254
2.3.18 Use N/P When Select Neighbour Cell for Uplink Level Handover On
Sdcch..................................................................................................2-255
2.3.19 Use N/P When Select Neighbour Cell for Uplink Level Handover On
Tch......................................................................................................2-256
2.3.20 Use N/P When Select Neighbour Cell for Downlink Level Handover On
Sdcch..................................................................................................2-258
VI
SJ-20140527134815-013|2015-03-10(R1.1)
2.3.21 Use N/P When Select Neighbour Cell for Downlink Level Handover On
Tch......................................................................................................2-259
2.3.22 BSC Internal Handover Parameter of IPA..............................................2-260
2.3.23 Handover between cells of different net support ....................................2-261
2.3.24 the policy of choosing speech version in 3GPP IPA BSC handover .........2-262
2.3.25 Forbid Handover during releasing.........................................................2-264
2.3.26 the interval of forbid Handover..............................................................2-265
2.3.27 Optimize when handover command lost................................................2-266
2.3.28 The delay after handover command when optimize ...............................2-267
2.3.29 Old BSS to new BSS information 1 .......................................................2-269
2.4 eMLPP Configuration(GBssEmlpp)...................................................................2-270
2.4.1 eMLPP ID .............................................................................................2-270
2.4.2 Queue indicate when assign ..................................................................2-271
2.4.3 Queue allowed when handover ..............................................................2-272
2.4.4 Forced handover indication for assign.....................................................2-274
2.4.5 Forced handover indication for handover ................................................2-275
2.4.6 Forced release indicate when assign ......................................................2-276
2.4.7 Forced release allowed when handover ..................................................2-278
2.4.8 Wait resource timer after forced handover...............................................2-279
2.4.9 Wait resource timer after forced release..................................................2-280
2.4.10 Enough low priority for preemption........................................................2-282
2.4.11 Enough call duration for preemption......................................................2-283
2.4.12 Forced handover target penalty time.....................................................2-284
2.4.13 Priority of emergency service ...............................................................2-286
2.4.14 User priority threshold for EMLPP.........................................................2-287
2.4.15 Reserved channel first .........................................................................2-288
2.4.16 Support EMLPP ..................................................................................2-289
2.4.17 EMLPP channel reserved rate..............................................................2-291
2.5 eMLPP User Priority Configuration(GEmlppUserPriority)....................................2-292
2.5.1 eMLPP User Priority Configuration ID .....................................................2-292
2.5.2 User priority ..........................................................................................2-293
2.5.3 Strategy for preemption when assign ......................................................2-294
2.5.4 Strategy for preemption when handover..................................................2-296
2.5.5 Max forced handover times when assign ................................................2-297
2.5.6 Max forced handover times when handover ............................................2-299
2.5.7 Max forced release times when assign ...................................................2-300
2.5.8 Max forced release times when handover ...............................................2-301
2.5.9 Preemption duration when assign...........................................................2-302
VII
SJ-20140527134815-013|2015-03-10(R1.1)
2.5.10 Preemption duration when handover.....................................................2-304

2.5.11 Timer for start forced release when assign ............................................2-305
2.5.12 Timer for start forced release when handover ........................................2-306
2.5.13 Interval for search forced handover target when assign..........................2-308
2.5.14 Interval for search forced handover target when handover .....................2-309
2.5.15 Interval for search forced release target when assign.............................2-310
2.5.16 Interval for search forced release target when handover ........................ 2-311
2.5.17 Queue timer for assign.........................................................................2-313
2.5.18 Queue timer for handover ....................................................................2-314
2.6 BSS Function PS(GBssFunctionPS).................................................................2-315
2.6.1 BSC PS ID............................................................................................2-315
2.6.2 Bvc flow control period...........................................................................2-316
2.6.3 MS flow control period ...........................................................................2-318
2.6.4 Max times of radio access capabilities update retry .................................2-319
2.6.5 Max times of PFC create retry ................................................................2-321
2.6.6 Max times of PFC modify retry ...............................................................2-322
2.6.7 Max times of Bvc block retry ..................................................................2-323
2.6.8 Max times of Bvc unblock retry...............................................................2-325
2.6.9 MAX times of Bvc reset retry ..................................................................2-326
2.6.10 Max times of suspend retry ..................................................................2-327
2.6.11 Max times of resume retry ....................................................................2-329
2.6.12 Max allowed number of continuous losses of uplink data
blocks(N3101) .....................................................................................2-330
2.6.13 Times of packet uplink ACK/NACK retries(N3103) .................................2-332
2.6.14 Max allowed number of continuous losses of uplink RLC/MAC control
message(N3105) .................................................................................2-333
2.6.15 Bvc flow control support .......................................................................2-335
2.6.16 MS flow control support .......................................................................2-336
2.6.17 Bvc flow control R MIN value................................................................2-338
2.6.18 MS flow control R MIN value ................................................................2-339
2.6.19 Flow control mode ...............................................................................2-340
2.6.20 PFC support........................................................................................2-341
2.6.21 Net operation mode .............................................................................2-343
2.6.22 Page coordination support ...................................................................2-344
2.6.23 NACC support.....................................................................................2-346
2.6.24 LLC Transfer for SAPI0(Reserved) .......................................................2-347
2.6.25 LLC Transfer for SAPI1(LLGMM)..........................................................2-349
2.6.26 LLC Transfer for SAPI2(TOM2) ............................................................2-350
VIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.27 LLC Transfer for SAPI3(User-Data) ......................................................2-351

2.6.31 LLC Transfer for SAPI7(LLSMS)...........................................................2-356
2.6.32 LLC Transfer for SAPI8(TOM8) ............................................................2-358
2.6.34 LLC Transfer for SAPI10(Reserved) .....................................................2-360
2.6.35 LLC Transfer for SAPI11(User-Data).....................................................2-362
2.6.40 RIM support ........................................................................................2-368
2.6.41 RIM retry times....................................................................................2-370
2.6.42 TBF establish support ..........................................................................2-371
2.6.43 Signal extended uplink TBF support .....................................................2-372
2.6.44 Highest coding scheme of POC service in GPRS ..................................2-373
2.6.45 Highest coding scheme of POC service in EGPRS ................................2-375
2.6.46 Support of enhanced radio status procedures........................................2-376
2.6.47 Support of PFC flow control procedures ................................................2-378
2.6.48 PS handover support ...........................................................................2-379
2.6.49 Max of sending PS handover required ..................................................2-380
2.6.50 Enable PS Handover Indications in Inter-BSS
handover
...........................................................................................................2-381
2.6.51 Request SI/PSI ...................................................................................2-383
2.6.52 Service UTRAN CCO support ..............................................................2-384
2.6.53 FANR in TBF support...........................................................................2-385
2.6.54 DLDC support .....................................................................................2-386
2.6.55 RTTI support .......................................................................................2-387
2.6.56 EGPRS2-A support .............................................................................2-389
2.6.57 EGPRS prior to GPRS Support ............................................................2-390
2.6.58 Allocating weights of EGPRS ...............................................................2-391
2.6.59 Choose PS route by NSVC ..................................................................2-392
2.6.60 Enable PS Uplink Power Control In Establishment Phase ......................2-394
2.6.61 DTM Enhance Capability .....................................................................2-395
IX
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.62 Enable PCU resource alarm.................................................................2-396

2.6.63 E-UTRAN CCN support .......................................................................2-397
2.6.64 DTM Handover Support .......................................................................2-398
2.6.65 Continue with CS HO While PS HO is failure in DTM HO .......................2-399
2.6.66 Send suspend message when GPRS suspension .................................2-400
2.6.67 Send by SNDCP indicator ....................................................................2-402
2.6.68 TCP/IP performance enhance ..............................................................2-403
2.6.69 IP Segment Optimization .....................................................................2-404
2.6.70 Support resource optimizing by service .................................................2-405
2.6.71 Identify of special service .....................................................................2-406
2.6.72 Extended uplink dynamic allocation support ..........................................2-407
2.6.73 Resource pool for PS rate ....................................................................2-409
2.6.74 Max users of POC service on shared PS channel uplink ........................2-410
2.6.75 Max users of POC service on shared PS channel downlink .................... 2-411
2.6.76 Optimized POC service support............................................................2-412
2.6.77 IP abis pool bandwidth restore support .................................................2-413
2.6.78 Max LLC num that per bssgp may save ................................................2-415
2.6.79 Max LLC num that per bssgp may transfer ...........................................2-416
2.6.80 RRM threshold ....................................................................................2-418
2.6.81 Parameter of Flow control mode 1 ........................................................2-419
2.6.82 Parameter of Flow control mode 2 ........................................................2-420
2.6.83 CBL in Bvc/MS flow control ..................................................................2-422
2.6.84 Coefficient of Bvc bucket size...............................................................2-423
2.6.85 Coefficient of MS bucket ......................................................................2-424
2.6.86 Enable implicit reject with paging ..........................................................2-425
2.6.87 Implicit reject CS and PS with paging....................................................2-426
2.6.88 PS service Bar when Gb break.............................................................2-428
2.6.89 Throughput of IPGB.............................................................................2-429
2.6.90 alive time of early downlink tbf..............................................................2-430
2.6.91 enable slave self recovering .................................................................2-431
2.6.92 Paging Send by NSE ...........................................................................2-432
2.6.93 Frequency band supported by MS check indication used for
Co-BCCH ............................................................................................2-433
2.7 Common Measure and Information Exchange(GCommMeas) ............................2-435
2.7.1 Common Measure and Information Exchange ID.....................................2-435
2.7.2 Report characteristics ............................................................................2-436
2.7.3 Measurement Load Threshold 1 .............................................................2-437
2.7.4 Measurement RT Load Threshold 1........................................................2-438
X
SJ-20140527134815-013|2015-03-10(R1.1)
2.7.5 Measurement NRT Load Threshold 1 .....................................................2-439

2.7.6 Measurement Load Threshold 2 .............................................................2-440
2.7.7 Measurement RT Load Threshold 2........................................................2-442
2.7.8 Measurement NRT Load Threshold 2 .....................................................2-443
2.7.9 Report periodicity unit ............................................................................2-444
2.7.10 Report Periodicity Value.......................................................................2-445
2.7.11 Measurement Hysteresis Time .............................................................2-446
2.7.12 Event Report Periodicity.......................................................................2-447
2.7.13 Information Report Type.......................................................................2-449
2.7.14 Measurement type...............................................................................2-450
2.7.15 Support of 2g request Iur-g ..................................................................2-451
2.7.16 Not Real Time Load Overflow Threshold ...............................................2-452
2.7.17 Not Real Time Load High Threshold .....................................................2-454
2.7.18 Not Real Time Load Low Threshold ......................................................2-455
2.8 BSC Precise Paging Configuration(GBssPrecisePaging) ...................................2-456
2.8.1 BSC Precise Paging Configuration ID .....................................................2-456
2.8.2 Support Precise Paging .........................................................................2-457
2.8.3 Use HPC for Precise Paging ..................................................................2-459
2.8.4 Adopt Precise Paging for repaging of Circuit Switched Service ................2-460
2.8.5 Adopt Precise Paging for repaging of Packet Switched Service ................2-461
2.8.6 Allow Exceed area Precise Paging for Circuit Switched Service ...............2-462
2.8.7 Allow Exceed area Precise Paging for Packet Switched Service...............2-463
2.8.8 Paging Repeat Time for Circuit Switched Service ....................................2-465
2.8.9 Paging Repeat Time for Packet Switched Service ...................................2-466
2.9 BSC Reserved Configuration(GBssFunctionRsv) ..............................................2-467
2.9.1 Global Reserved Parameter 1 ................................................................2-467
2.9.10 Global Reserved Parameter 10 ............................................................2-476
2.9.11 Global Reserved Parameter 11.............................................................2-477
XI
SJ-20140527134815-013|2015-03-10(R1.1)

2.10 External GSM Cell Configuration(GExternalGsmCell) ......................................2-488
2.10.1 External GSM Cell ID...........................................................................2-488
2.10.2 Cell Identity .........................................................................................2-489
2.10.3 BCCH arfcn ........................................................................................2-490
2.10.4 NCC ...................................................................................................2-491
2.10.5 BCC ...................................................................................................2-492
2.10.6 LAC (LAC) ..........................................................................................2-493
2.10.7 MCC...................................................................................................2-494
2.10.8 MNC...................................................................................................2-495
2.10.9 FreqBand............................................................................................2-497
2.10.10 Cell type ...........................................................................................2-498
2.10.11 GPRS service support........................................................................2-499
2.10.12 Allow SOLSA MS to access ...............................................................2-500
2.10.13 LSA ID ..............................................................................................2-501
2.10.14 RAC (RAC) .......................................................................................2-502
2.10.15 Cell bar access 2 ...............................................................................2-504
2.10.16 GPRS access minimal signal level in idle ............................................2-505
2.10.17 GPRS MAX initial access signal level in idle ........................................2-507
2.10.18 Cell reselection offset in idle ...............................................................2-508
2.10.19 Cell reselection temporary offset in idle ...............................................2-510
2.10.20 Penalty time of cell reselection in idle..................................................2-512
2.10.21 HSC exist in idle ................................................................................2-513
2.10.22 Threshold of HSC signal level in idle ...................................................2-515
2.10.23 HCS priority in idle.............................................................................2-516
2.10.24 GPRS access minimal signal level in transfer ......................................2-517
2.10.25 GPRS MAX initial access signal level in transfer ..................................2-518
2.10.26 Cell reselection offset in transfer .........................................................2-520
2.10.27 Cell reselection temporary offset in transfer .........................................2-522
2.10.28 Penalty time of cell reselection in transfer............................................2-523
XII
SJ-20140527134815-013|2015-03-10(R1.1)
2.10.29 HSC exist in transfer ..........................................................................2-525

2.10.30 Threshold of HSC signal level in transfer.............................................2-526
2.10.31 HCS priority in transfer.......................................................................2-527
2.10.32 MAX power level of MS......................................................................2-529
2.10.33 RemoteSp DN ...................................................................................2-530
2.10.34 Um soft Synchronous Support ............................................................2-531
2.10.35 Routing Area Colour Code .................................................................2-532
2.11 External UTRAN FDD Cell Configuration(GExternalUtranCellFDD) ...................2-533
2.11.1 External UTRAN FDD Cell ID ...............................................................2-533
2.11.2 CI .......................................................................................................2-534
2.11.3 MCC ...................................................................................................2-535
2.11.4 MNC ...................................................................................................2-536
2.11.5 RNC ID ...............................................................................................2-538
2.11.6 LAC (LAC) ..........................................................................................2-539
2.11.7 UTRAN cell frequency..........................................................................2-540
2.11.8 Scrambling code..................................................................................2-541
2.11.9 TX diversity indication ..........................................................................2-542
2.11.10 RAC (RAC) .......................................................................................2-543
2.11.11 Whether an external 3G cell is included in GSM system. ......................2-545
2.12 External UTRAN TDD Cell Configuration(GExternalUtranCellTDDLcr) ..............2-546
2.12.1 External UTRAN TDD Cell ID ...............................................................2-546
2.12.2 CI .......................................................................................................2-547
2.12.3 MCC...................................................................................................2-548
2.12.4 MNC...................................................................................................2-549
2.12.5 RNC ID...............................................................................................2-550
2.12.6 LAC (LAC) ..........................................................................................2-551
2.12.7 UTRAN adjacent cell bandwidth ...........................................................2-553
2.12.8 UTRAN cell frequency .........................................................................2-554
2.12.9 UTRAN TDD cell parameter .................................................................2-555
2.12.10 TX diversity indication ........................................................................2-556
2.12.11 RAC (RAC) .......................................................................................2-557
2.12.12 Apply Sync Case / Apply TSTD ..........................................................2-559
2.12.13 Whether an external 3G cell is included in
GSM system.
...........................................................................................................2-560
2.13 External E-UTRAN FDD Cell Configuration(GExternalEutranCellFDD)..............2-561
2.13.1 External E-UTRAN FDD Cell Configuration ID .......................................2-561
XIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.13.2 MCC...................................................................................................2-562
2.13.3 MNC...................................................................................................2-563
2.13.4 EUTRAN NODEB Identification ............................................................2-564
2.13.5 Physical layer cell identity of LTE CELL.................................................2-566
2.13.6 specified EARFCN of E-UTRAN cells ...................................................2-567
2.13.7 Tracking area code ..............................................................................2-568
2.13.8 The attribute of LTE NodeB ..................................................................2-569
2.13.9 the minimum value of the channel bandwidth ........................................2-570
2.13.10 EUTRAN CELL Identification..............................................................2-571
2.14 External UTRAN FDD Cell CRRM Configuration(GCrrmNCellLdFDD)...............2-572
2.14.1 External UTRAN FDD Cell CRRM ID ....................................................2-572
2.14.2 Cs Remained User Num Low Threshold ...............................................2-573
2.14.3 Ps Remained User Num Low Threshold................................................2-575
2.14.4 Cs Remained User Num Medium Threshold..........................................2-576
2.14.5 Ps Remained User Num Medium Threshold..........................................2-577
2.14.6 Uplink Load Low Threshold ..................................................................2-578
2.14.7 Uplink Load Medium Threshold ............................................................2-579
2.14.8 Uplink Load High Threshold .................................................................2-580
2.14.9 Downlink Load Low Threshold..............................................................2-581
2.14.10 Downlink Load Medium Threshold ......................................................2-583
2.14.11 Downlink Load High Threshold ...........................................................2-584
2.14.12 Real Time Uplink Load Low Threshold ................................................2-585
2.14.13 Real Time Uplink Load Medium Threshold ..........................................2-586
2.14.14 Real Time Uplink Load High Threshold ...............................................2-587
2.14.15 Real Time Downlink Load Low Threshold............................................2-588
2.14.16 Real Time Downlink Load Medium Threshold ......................................2-589
2.14.17 Real Time Downlink Load High Threshold ...........................................2-591
2.14.18 Not Real Time Uplink Load Low Threshold ..........................................2-592
2.14.19 Not Real Time Uplink Load Medium Threshold ....................................2-593
2.14.20 Not Real Time Uplink Load High Threshold .........................................2-594
2.14.21 Not Real Time Downlink Load Low Threshold......................................2-595
2.14.22 Not Real Time Downlink Load Medium Threshold ................................2-596
2.14.23 Not Real Time Downlink Load High Threshold .....................................2-597
2.15 External UTRAN TDD Cell CRRM Configuration(GCrrmNCellLdTDDLcr) ..........2-599
2.15.1 External UTRAN TDD Cell CRRM ID ....................................................2-599
2.15.2 Cs Remained User Num Low Threshold ...............................................2-600
2.15.3 Ps Remained User Num Low Threshold................................................2-601
XIV
SJ-20140527134815-013|2015-03-10(R1.1)
2.15.4 Cs Remained User Num Medium Threshold..........................................2-602

2.15.5 Ps Remained User Num Medium Threshold..........................................2-603
2.15.6 Uplink Load Low Threshold ..................................................................2-604
2.15.7 Uplink Load Medium Threshold ............................................................2-606
2.15.8 Uplink Load High Threshold .................................................................2-607
2.15.9 Downlink Load Low Threshold..............................................................2-608
2.15.12 Real Time Uplink Load Low Threshold ................................................ 2-611
2.15.14 Real Time Uplink Load High Threshold ...............................................2-614
2.15.15 Real Time Downlink Load Low Threshold............................................2-615
2.15.16 Real Time Downlink Load Medium Threshold ......................................2-616
2.15.17 Real Time Downlink Load High Threshold ...........................................2-617
2.15.18 Not Real Time Uplink Load Low Threshold ..........................................2-618
2.15.19 Not Real Time Uplink Load Medium Threshold ....................................2-620
2.15.20 Not Real Time Uplink Load High Threshold .........................................2-621
2.15.21 Not Real Time Downlink Load Low Threshold......................................2-622
2.15.22 Not Real Time Downlink Load Medium Threshold ................................2-623
2.15.23 Not Real Time Downlink Load High Threshold .....................................2-624
2.16 External E-UTRAN TDD Cell Configuration(GExternalEutranCellTDD)..............2-626
2.16.1 External E-UTRAN TDD Cell Configuration ID .......................................2-626
2.16.2 MCC...................................................................................................2-627
2.16.3 MNC...................................................................................................2-628
2.16.4 EUTRAN NODEB Identification ............................................................2-629
2.16.5 Physical layer cell identity of LTE CELL.................................................2-630
2.16.6 specified EARFCN of E-UTRAN cells ...................................................2-631
2.16.7 Tracking area code ..............................................................................2-632
2.16.8 The attribute of LTE NodeB ..................................................................2-633
2.16.9 the minimum value of the channel bandwidth ........................................2-635
2.16.10 EUTRAN CELL Identification..............................................................2-636
2.17 GSM Cell Configuration(GGsmCell)................................................................2-637
2.17.1 GSM Cell Configuration ID ...................................................................2-637
2.17.2 CI .......................................................................................................2-638
2.17.3 NCC ...................................................................................................2-639
2.17.4 BCC ...................................................................................................2-641
2.17.5 TSC....................................................................................................2-642
XV
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.6 MIN received signal level to access ......................................................2-643

2.17.7 Control channel MAX power level .........................................................2-644
2.17.8 NCC permitted ....................................................................................2-646
2.17.9 LocationArea DN .................................................................................2-648
2.17.10 Cell Sequence...................................................................................2-649
2.17.11 BCCH arfcn .......................................................................................2-650
2.17.12 Common control channel configuration ...............................................2-651
2.17.13 PS Support .......................................................................................2-653
2.17.14 GRoutingArea DN..............................................................................2-654
2.17.15 Number of blocks reserved for AGCH .................................................2-655
2.17.16 Number of multi-frames of the PCH ....................................................2-657
2.17.17 Early class-mark sending control ........................................................2-658
2.17.18 CBC support .....................................................................................2-660
2.17.19 FreqBand..........................................................................................2-661
2.17.20 Cell type ...........................................................................................2-662
2.17.21 MAX number of re-transmitting events times .......................................2-663
2.17.22 Number of slots to spread transmission...............................................2-665
2.17.23 Cell bar qualify ..................................................................................2-667
2.17.24 Cell bar access..................................................................................2-668
2.17.25 Call re-establishment allowed .............................................................2-670
2.17.26 Emergency call allowed .....................................................................2-671
2.17.27 Access Control ..................................................................................2-672
2.17.28 Uplink discontinuous transmission ......................................................2-674
2.17.29 Protection period for access attempt ...................................................2-675
2.17.30 Multi-band report indication ................................................................2-677
2.17.31 Redirection enable.............................................................................2-679
2.17.32 Outer redirection enable.....................................................................2-681
2.17.33 Downlink discontinuous transmission allowed......................................2-682
2.17.34 SI13 sending position.........................................................................2-683
2.17.35 Queue allowed when assign...............................................................2-685
2.17.36 Forced release indicate when assign ..................................................2-686
2.17.37 Forced handover indication for assign.................................................2-687
2.17.38 Queue allowed when handover ..........................................................2-689
2.17.39 Forced release indicate when handover ..............................................2-690
2.17.40 Forced handover indication for handover.............................................2-691
2.17.41 Cipher mode priority 1........................................................................2-693
XVI
SJ-20140527134815-013|2015-03-10(R1.1)

2.17.48 Preprocessing indication ....................................................................2-703
2.17.49 Fast average indication ......................................................................2-705
2.17.50 Allowed FACCH call setup after emergency call...................................2-706
2.17.51 Allowed FACCH call setup when paging respond.................................2-707
2.17.52 Allowed call setup on FACCH .............................................................2-709
2.17.53 Allowed call reestablished on FACCH .................................................2-710
2.17.54 Minimal resource threshold ................................................................ 2-711
2.17.55 PCH load indication period .................................................................2-712
2.17.56 CCCH load indication (RACH) ............................................................2-713
2.17.57 CCCH load indication (PCH) ..............................................................2-714
2.17.58 Interference average period ...............................................................2-715
2.17.59 Interference Band Boundary...............................................................2-717
2.17.60 MAX resending times for physical information......................................2-718
2.17.61 RACH load indication period...............................................................2-719
2.17.62 Average bursts count surveyed by RACH............................................2-720
2.17.63 RACH receiving signal level threshold for busy burst............................2-722
2.17.64 Times of N200 for SDCCH .................................................................2-723
2.17.65 Times of N200 for FACCH_F ..............................................................2-724
2.17.66 Times of N200 for FACCH_H..............................................................2-725
2.17.67 Times of N200 for SACCH .................................................................2-726
2.17.68 Times of N200 for establish ................................................................2-727
2.17.69 Times of N200 for Release .................................................................2-728
2.17.70 Interval of SDCCH re-sending PHY info message................................2-729
2.17.71 Interval of TCH re-sending PHY info message.....................................2-731
2.17.72 TA Max .............................................................................................2-732
2.17.73 TA allowed ........................................................................................2-734
2.17.74 Allow SOLSA MS to access ...............................................................2-735
2.17.75 Repeated ACCH support....................................................................2-736
2.17.76 Frequency offset correct support ........................................................2-738
2.17.77 Maximum power on handover command support .................................2-739
2.17.78 TA MIN .............................................................................................2-740
2.17.79 8PSK modulating power attenuation level ...........................................2-741
XVII
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.80 Access class parameter config select..................................................2-742

2.17.81 Cell access control support ................................................................2-744
2.17.82 Strategy for E-Utran Neighbour Select When Release .........................2-745
2.17.83 E-Utran FDD and TDD Prio When Release .........................................2-746
2.17.84 Support Emergency call preemption ...................................................2-747
2.17.85 BA show ...........................................................................................2-749
2.17.86 Support CS paging prefer PS Assignment ...........................................2-750
2.17.87 Channel Select Strategy ....................................................................2-751
2.17.88 EMLPP channel reserved rate ............................................................2-753
2.17.89 Use cell EMLPP Threshold.................................................................2-754
2.17.90 Dynamic HR support indication...........................................................2-755
2.17.91 Threshold of AMR HR........................................................................2-756
2.17.92 Threshold for FR to HR ......................................................................2-757
2.17.93 Dynamic HR channel allocation algorithm ...........................................2-759
2.17.94 HR channel fragment finishing support................................................2-760
2.17.95 Busy threshold for HR defrag .............................................................2-762
2.17.96 Idle FR threshold For HR defrag .........................................................2-763
2.17.97 HR channel percentage threshold.......................................................2-764
2.17.98 If support allocating channel by TA......................................................2-766
2.17.99 The TA threshold of allocating channel in BCCH ..................................2-767
2.17.100 Support dynamic channel move ........................................................2-768
2.17.101 Idle static TCH threshold for dynamic channel move ..........................2-769
2.17.102 Additional reselection parameter indication(SI4).................................2-770
2.17.103 Cell reselection parameter indication.................................................2-772
2.17.104 Cell reselection offset.......................................................................2-773
2.17.105 Temporary offset..............................................................................2-776
2.17.106 Penalty time ....................................................................................2-777
2.17.107 Cell reselecting hysteresis level ........................................................2-778
2.17.108 new establishment causes indication ................................................2-780
2.17.109 Power offset indication .....................................................................2-782
2.17.110 Power offset ....................................................................................2-783
2.17.111 Priority threshold ..............................................................................2-784
2.17.112 LSA Offset.......................................................................................2-785
2.17.113 Additional reselection parameter indicator(SI3) ..................................2-786
2.17.114 MAX value of MS Radio link timeout..................................................2-788
2.17.115 Radio link failure criterion .................................................................2-789
2.17.116 MAX value of BSS Radio link timeout ................................................2-791
XVIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.117 Receiving level threshold..................................................................2-792

2.17.118 Receiving quality threshold ...............................................................2-794
2.17.119 Radio link failure checking period ......................................................2-795
2.17.120 BCCH switch allowed.......................................................................2-796
2.17.121 Dynamic configuration SDCCH.........................................................2-797
2.17.122 Baseband frequency hopping TRX exchange support ........................2-799
2.17.123 Idle TS's PA Power off......................................................................2-800
2.17.124 Switch flag of cell TRX power off.......................................................2-801
2.17.125 Start PA output voltage tuning...........................................................2-802
2.17.126 Enable RRU of cell power off............................................................2-803
2.17.127 The switch of CIR report...................................................................2-804
2.17.128 The L2 frame of Lapdm fill random value...........................................2-805
2.17.129 MR Report Time Bmp ......................................................................2-807
2.17.130 Support intelligent cell shutting down ................................................2-808
2.17.131 Upper GGsmCell DN .......................................................................2-809
2.17.132 Mobile Originated Short Message Intercept .......................................2-810
2.17.133 Mobile Terminated Short Message Intercept ...................................... 2-811
2.17.134 Diversity Combine Mode ..................................................................2-812
2.17.135 Joint Source-Controlled Channel Decoding Switch.............................2-814
2.17.136 Joint Source-Controlled Channel Decoding .......................................2-815
2.17.137 IBS time bitmap ...............................................................................2-816
2.17.138 Cell shuttingdown based on traffic load .............................................2-818
2.17.139 Support implicit reject in assignment .................................................2-819
2.17.140 Implicit reject CS and PS..................................................................2-820
2.17.141 Support broadcasting EAB ...............................................................2-821
2.17.142 EAB Subcategory ............................................................................2-822
2.17.143 EAB Authorization Mask...................................................................2-823
2.17.144 EAB Position ...................................................................................2-825
2.17.145 NCC Config Parameter ....................................................................2-826
2.17.146 RxQual Threshlod............................................................................2-827
2.17.147 TCH Allocation Threshold For Dual-Frequency Network .....................2-828
2.17.148 Um soft Synchronous Support ..........................................................2-830
2.17.149 Is Enhanced Dual-Frequency Network Support..................................2-831
2.17.150 SubCell Channel Allocation Control...................................................2-832
2.17.151 Use Uniform Power Control .............................................................2-833
2.17.152 Longitude ........................................................................................2-835
2.17.153 Latitude...........................................................................................2-836
XIX
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.154 Altitude ...........................................................................................2-837

2.17.155 Offset Angle ....................................................................................2-838
2.17.156 Site location ....................................................................................2-839
2.17.157 Immediate assignment occupy PCH option........................................2-840
2.17.158 Immediate assignment maximum delay times ....................................2-841
2.17.159 Arf power reduce function switch ......................................................2-842
2.17.160 Prom power step .............................................................................2-843
2.17.161 Stop power Reduce Level Threshold.................................................2-844
2.17.162 Reduce Power Arfcn ........................................................................2-845
2.17.163 Reduce Power Step .........................................................................2-846
2.17.164 Assign strategy for Cobcch...............................................................2-847
2.17.165 SupportBtsBcchExchg .....................................................................2-849
2.17.166 Dynamic Priority NCell Traffic Threshold ...........................................2-850
2.17.167 Non Emergency Handover use Dynamic Priority................................2-851
2.17.168 Emergency Handover use Dynamic Priority .......................................2-852
2.17.169 Filter Exceed Traffic threshold NCell .................................................2-853
2.17.170 Support SDCCH handover before A5/1 ciphering...............................2-855
2.17.171 Support modify NCell ARFCNS after A5/1 ciphering...........................2-856
2.17.172 Support Sys Info 6 fill bits random after A5/1 ciphering .......................2-857
2.17.173 Dynamic configuration CCCH ...........................................................2-858
2.17.174 PCH threshold For CCCH Expand ....................................................2-859
2.17.175 PCH threshold For CCCH Restore....................................................2-861
2.17.176 Hysteresis For CCCH Expand ..........................................................2-862
2.17.177 Hysteresis For CCCH Restore ..........................................................2-863
2.17.178 Maximum Timeslot Number For CCCH Expand .................................2-864
2.17.179 Minimum Tch reserved for dynamic MCCCH......................................2-865
2.17.180 EMI Control .....................................................................................2-866
2.17.181 EFR Support ...................................................................................2-867
2.17.182 Support EMLPP...............................................................................2-868
2.17.183 Gps Frame Offset ............................................................................2-869
2.17.184 Delay of TS forcible release..............................................................2-870
2.17.185 Paging repeat number......................................................................2-872
2.17.186 Force FACCH..................................................................................2-873
2.17.187 TCH->SDCCH limit ..........................................................................2-874
2.17.188 Immediate assignment priority ..........................................................2-876
2.17.189 FACCH Enhance .............................................................................2-877
2.17.190 the TCH load threshold of FACCH enhance.......................................2-878
XX
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.191 MOS optimizing in handover procedure.............................................2-879

2.17.192 max detection period........................................................................2-880
2.17.193 PLVA support ..................................................................................2-882
2.17.194 Switch of TCH Trx maximum protection.............................................2-883
2.17.195 Calculate PS load when Trx Power off...............................................2-884
2.17.196 PS load limit for trx power off ............................................................2-885
2.17.197 PS Load limit for urgency trx power on ..............................................2-886
2.17.198 The Number of UE Signalling Trace Data Collection Configuration
Index Related to Cell ............................................................................2-887
2.17.199 MIN signal level threshold of MS uplink RACH access .......................2-888
2.17.200 Cell load Threshold of TRX license increase......................................2-890
2.17.201 Threshold of the Cell expected load .................................................2-891
2.17.202 The method of intelligent TRX poweroff.............................................2-892
2.17.203 IBS shutdown limit ...........................................................................2-893
2.17.204 IBS powerup limit.............................................................................2-894
2.17.205 IBS powerover limit ..........................................................................2-895
2.17.206 IBS power priority ............................................................................2-897
2.17.207 BCCH forbidden TS merger time bitmap ...........................................2-898
2.17.208 FastReturn to UTRAN ......................................................................2-899
2.17.209 FastReturn to LTE............................................................................2-900
2.17.210 The switch of unblock cell about over VSWR alarm ...........................2-902
2.18 Cell Precise Paging Configuration(GCellPrecisePaging) ..................................2-903
2.18.1 Cell Precise Paging Configuration ID ....................................................2-903
2.18.2 Adopt Precise Paging for Circuit Switched Service.................................2-904
2.18.3 Adopt Precise Paging for Packet Switched Service................................2-905
2.18.4 VPC Age Time ....................................................................................2-906
2.18.5 Paging Hole Timer...............................................................................2-908
2.19 Location Area(GLocationArea) .......................................................................2-909
2.19.1 Location Area ID .................................................................................2-909
2.19.2 LAC....................................................................................................2-910
2.19.3 IMSI attach/detach allowed .................................................................. 2-911
2.19.4 Periodical location updating timer .........................................................2-912
2.19.5 GPLMN DN.........................................................................................2-914
2.19.6 GMocnArea DN...................................................................................2-915
2.20 Routing Area(GRoutingArea) .........................................................................2-916
2.20.1 Routing Area ID...................................................................................2-916
2.20.2 RAC ...................................................................................................2-917
2.21 AMR Configuration(GCellAmr) .......................................................................2-919
XXI
SJ-20140527134815-013|2015-03-10(R1.1)
2.21.1 AMR Configuration ID ..........................................................................2-919

2.21.2 Support AMR Codec............................................................................2-920
2.21.3 Use cell AMR parameter ......................................................................2-921
2.21.4 AMR full Active Codec Set(4.75kbps) ...................................................2-922
2.21.6 AMR full Active Codec Set(5.9kbps) .....................................................2-924
2.21.10 AMR full Active Codec Set(10.2kbps)..................................................2-929
2.21.11 AMR full Active Codec Set(12.2kbps)..................................................2-930
2.21.12 AMR Half Active Codec Set(4.75kbps) ................................................2-931
2.21.14 AMR Half Active Codec Set(5.9kbps)..................................................2-933
2.21.18 Thresholds of AMR FR 1....................................................................2-938
2.21.25 Thresholds of AMR HR 1 ...................................................................2-949
2.21.30 Hysteresis of AMR FR 1.....................................................................2-956
2.21.37 Hysteresis of AMR HR 1 ....................................................................2-968
XXII
SJ-20140527134815-013|2015-03-10(R1.1)

2.21.42 Enable AMR FR noise control.............................................................2-975
2.21.43 AMR FR Initial codec mode ................................................................2-976
2.21.44 AMR FR Start mode ..........................................................................2-978
2.21.45 Enable AMR HR noise control ............................................................2-979
2.21.46 AMR HR Initial codec mode ...............................................................2-980
2.21.47 AMR HR Start mode ..........................................................................2-982
2.21.48 AMR codec adjust mode ....................................................................2-983
2.21.49 AMR codec adjust interval..................................................................2-985
2.21.50 BSS radio link timer's max value for AMR FR ......................................2-986
2.21.51 BSS radio link timer's max value for AMR HR ......................................2-987
2.21.52 MAX value of MS Radio link timeout for AMR FR.................................2-989
2.21.53 MAX value of MS Radio link timeout for AMR HR ................................2-991
2.21.54 Support AMR-WB Codec ...................................................................2-992
2.21.55 Hysteresis of AMRWFS 1...................................................................2-993
2.21.56 Hysteresis of AMRWFS 2...................................................................2-995
2.21.57 Hysteresis of AMROWFS 1 ................................................................2-996
2.21.60 Hysteresis of AMROWFS 4 ..............................................................2-1000
2.21.61 Hysteresis of AMROWHS 1..............................................................2-1001
2.21.63 Thresholds for AMRWFS 1...............................................................2-1004
2.21.65 Thresholds for AMROWFS 1 ............................................................2-1006
2.21.69 Thresholds for AMROWHS 1............................................................2-1012
2.21.71 MAX value of MS Radio link
timeout for AMR WFS
.........................................................................................................2-1014
XXIII
SJ-20140527134815-013|2015-03-10(R1.1)
timeout for AMR-WB OWFS

.........................................................................................................2-1016
timeout for AMR-WB OWHS
.........................................................................................................2-1018
2.21.74 BSS radio link timer's max value for FR-AMR-WB..............................2-1019
2.21.75 BSS radio link timer's max value for OFR-AMR-WB ...........................2-1021
2.21.76 BSS radio link timer's max value for AMR OWHR ..............................2-1023
2.22 Frequency Hopping System(GHoppingFrequency) ........................................2-1024
2.22.1 Frequency Hopping System ID ...........................................................2-1024
2.22.2 FhsID ...............................................................................................2-1025
2.22.3 Hopping sequence No. ......................................................................2-1027
2.22.4 MA Frequency List ............................................................................2-1028
2.23 Baseband Hopping System(GHoppingBaseband)..........................................2-1029
2.23.1 Baseband Hopping System ID............................................................2-1029
2.23.2 FhsID ...............................................................................................2-1030
2.23.3 Hopping sequence No. ......................................................................2-1031
2.23.4 MA Frequency List ............................................................................2-1033
2.24 Handover Control(GHandoverControl) ..........................................................2-1034
2.24.1 Handover Control ID ..........................................................................2-1034
2.24.2 Uplink power level Sample count ........................................................2-1035
2.24.3 Uplink level Weight ............................................................................2-1036
2.24.4 Downlink power level Sample count....................................................2-1038
2.24.5 Downlink level Weight........................................................................2-1039
2.24.6 Uplink quality Sample count ...............................................................2-1041
2.24.7 Uplink quality Weight .........................................................................2-1042
2.24.8 Downlink quality Sample count ...........................................................2-1044
2.24.9 Downlink quality Weight .....................................................................2-1045
2.24.10 Distance Sample count ....................................................................2-1047
2.24.11 Neighboring cell Sample count .........................................................2-1048
2.24.12 Number of zero allowed in AV...........................................................2-1050
2.24.13 MIN interval between inter-cell handover...........................................2-1051
2.24.14 Max time advance threshold between MS and BTS ...........................2-1053
2.24.15 Uplink receive level Threshold ..........................................................2-1054
2.24.16 Downlink receive level Threshold......................................................2-1057
2.24.17 Uplink receive quality Threshold .......................................................2-1060
2.24.18 Downlink receive quality Threshold ...................................................2-1062
XXIV
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.19 Uplink receive level of intra-ho Threshold ..........................................2-1063

2.24.20 Downlink receive level of intra-ho Threshold......................................2-1066
2.24.21 Uplink receive level Value P .............................................................2-1069
2.24.22 Uplink receive level Value N .............................................................2-1070
2.24.23 Downlink receive level Value P .........................................................2-1072
2.24.24 Downlink receive level Value N .........................................................2-1073
2.24.25 Uplink receive quality Value P...........................................................2-1075
2.24.26 Uplink receive quality Value N ..........................................................2-1076
2.24.27 Downlink receive quality Value P ......................................................2-1078
2.24.28 Downlink receive quality Value N ......................................................2-1079
2.24.29 Uplink receive level of intra-ho Value P .............................................2-1080
2.24.30 Uplink receive level of intra-ho Value N .............................................2-1082
2.24.31 Downlink receive level of intra-ho Value P .........................................2-1083
2.24.32 Downlink receive level of intra-ho Value N .........................................2-1085
2.24.33 Distance handover Value P ..............................................................2-1086
2.24.34 Distance handover Value N ..............................................................2-1087
2.24.35 PBGT handover Value P ..................................................................2-1089
2.24.36 PBGT handover Value N ..................................................................2-1090
2.24.37 Allow intra-Cell handover attempt due to uplink interference(High
Speed) ..............................................................................................2-1091
2.24.38 Allow intra-Cell handover attempt due to downlink interference(High
Speed) ..............................................................................................2-1092
2.24.39 Allow handover due to distance(High Speed) ....................................2-1093
2.24.40 Allow standard PBGT handover(High Speed) ....................................2-1095
2.24.41 Allow automatic handover due to traffic(High Speed) .........................2-1096
2.24.42 Allow intra-cell handover in super TRX channel due to downlink
interference(High Speed)....................................................................2-1097
2.24.43 Allow intra-cell handover in super TRX channel due to uplink
interference(High Speed)....................................................................2-1098
2.24.44 Allow adjacent cells handover in super TRX channel due to PBGT(High
Speed) ..............................................................................................2-1099
2.24.45 Allow rapid handover(High Speed).................................................... 2-1101
2.24.46 Allow Macro-Micro delay handover(High Speed)................................ 2-1102
2.24.47 Allow Micro-Micro delay handover(High Speed)................................. 2-1103
2.24.48 Allow force transfer handover(High Speed) ....................................... 2-1104
2.24.49 Allow quality handover in uplink(High Speed) .................................... 2-1105
2.24.50 Allow level handover in uplink(High Speed) ....................................... 2-1107
2.24.51 Allow quality handover in downlink(High Speed) ................................ 2-1108
XXV
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.52 Allow level handover in downlink(High Speed)................................... 2-1109

2.24.53 Allow downlink rapid handover(High Speed)...................................... 2-1110
2.24.54 Allow C/I limited handover(High Speed) ............................................ 2-1111
2.24.55 Allow downlink quality rapid handover(High Speed) ........................... 2-1113
2.24.56 Allow intra-Cell handover attempt due to uplink interference(Middle
Speed) .............................................................................................. 2-1114
2.24.57 Allow intra-Cell handover attempt due to downlink interference(Middle
Speed) .............................................................................................. 2-1115
2.24.58 Allow handover due to distance(Middle Speed) ................................. 2-1116
2.24.59 Allow standard PBGT handover(Middle Speed) ................................. 2-1118
2.24.60 Allow automatic handover due to traffic(Middle Speed) ...................... 2-1119
interference(Middle Speed)................................................................. 2-1120
interference(Middle Speed)................................................................. 2-1121
2.24.63 Allow adjacent cells handover in super TRX channel due to
PBGT(Middle Speed) ......................................................................... 2-1122
2.24.64 Allow rapid handover(Middle Speed)................................................. 2-1123
2.24.65 Allow Macro-Micro delay handover(Middle Speed)............................. 2-1125
2.24.66 Allow Micro-Micro delay handover(Middle Speed).............................. 2-1126
2.24.67 Allow force transfer handover(Middle Speed) .................................... 2-1127
2.24.68 Allow quality handover in uplink(Middle Speed) ................................. 2-1128
2.24.69 Allow level handover in uplink(Middle Speed) .................................... 2-1129
2.24.70 Allow quality handover in downlink(Middle Speed) ............................. 2-1131
2.24.71 Allow level handover in downlink(Middle Speed)................................ 2-1132
2.24.72 Allow downlink rapid handover(Middle Speed)................................... 2-1133
2.24.73 Allow C/I limited handover(Middle Speed) ......................................... 2-1134
2.24.74 Allow downlink quality rapid handover(Middle Speed) ........................ 2-1135
2.24.75 Allow intra-Cell handover attempt due to uplink interference(Low
Speed) .............................................................................................. 2-1137
2.24.76 Allow intra-Cell handover attempt due to downlink interference(Low
Speed) .............................................................................................. 2-1138
2.24.77 Allow handover due to distance(Low Speed) ..................................... 2-1139
2.24.78 Allow standard PBGT handover(Low Speed)..................................... 2-1140
2.24.79 Allow automatic handover due to traffic(Low Speed) .......................... 2-1141
interference(Low Speed) .................................................................... 2-1142
interference(Low Speed) .................................................................... 2-1144
XXVI
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.82 Allow adjacent cells handover in super TRX channel due to PBGT(Low
Speed) .............................................................................................. 2-1145
2.24.83 Allow dynamic adjustment of handover priority .................................. 2-1146
2.24.84 Allow rapid handover(Low Speed) .................................................... 2-1147
2.24.85 Allow Macro-Micro delay handover(Low Speed) ................................ 2-1148
2.24.86 Allow Micro-Micro delay handover(Low Speed).................................. 2-1149
2.24.87 Allow force transfer handover(Low Speed) ........................................ 2-1151
2.24.88 Allow quality handover in uplink(Low Speed) ..................................... 2-1152
2.24.89 Allow level handover in uplink(Low Speed)........................................ 2-1153
2.24.90 Allow quality handover in downlink(Low Speed)................................. 2-1154
2.24.91 Allow level handover in downlink(Low Speed).................................... 2-1155
2.24.92 Allow downlink rapid handover(Low Speed) ...................................... 2-1156
2.24.93 Allow C/I limited handover(Low Speed) ............................................. 2-1158
2.24.94 Allow downlink quality rapid handover(Low Speed) ............................ 2-1159
2.24.95 Synchronism ................................................................................... 2-1160
2.24.96 Asynchronism ................................................................................. 2-1161
2.24.97 Pseudo-synchronism ....................................................................... 2-1162
2.24.98 Pre-synchronism ............................................................................. 2-1164
2.24.99 Prior layer selecting parameter on signal level/quality ........................ 2-1165
2.24.100 Rapid handover Threshold ............................................................. 2-1166
2.24.101 Rapid handover Value N ................................................................ 2-1169
2.24.102 Handover to same layer other band neighbour cell for PBGT
permitted ........................................................................................... 2-1170
2.24.103 Handover to neighbour cell with no Layer Relation for PBGT
permitted ........................................................................................... 2-1171
2.24.104 Handover to upper layer neighbour cell for PBGT permitted ............. 2-1172
2.24.105 Handover to under layer neighbor cell for PBGT permitted ............... 2-1174
2.24.106 Penalty time for handover failure..................................................... 2-1175
2.24.107 Difference of dynamic priority ......................................................... 2-1176
2.24.108 PBGT difference ............................................................................ 2-1177
2.24.109 Same layer permitted on traffic HO ................................................. 2-1178
2.24.110 Upper layer permitted on traffic HO ................................................. 2-1179
2.24.111 Lower layer permitted on traffic HO ................................................. 2-1180
2.24.112 Undefined layer permitted on traffic HO ........................................... 2-1182
2.24.113 GSM900 frequency band P-GSM
permitted on traffic HO
......................................................................................................... 2-1183
2.24.114 EXT900 frequency band E-GSM permitted on traffic HO................... 2-1184
XXVII
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.115 DCS1800 frequency band permitted on traffic HO ............................ 2-1185

2.24.116 PCS1900 frequency band permitted on traffic HO ............................ 2-1186
2.24.117 GSM850 frequency band permitted on traffic HO ............................. 2-1187
2.24.118 Threshold of traffic for handover...................................................... 2-1188
2.24.119 Traffic handover threshold .............................................................. 2-1190
2.24.120 Level offset during penalty.............................................................. 2-1191
2.24.121 Uplink interference quality offset ..................................................... 2-1192
2.24.122 Uplink interference level offset ........................................................ 2-1194
2.24.123 Downlink interference quality offset ................................................. 2-1195
2.24.124 Downlink interference level offset.................................................... 2-1197
2.24.125 Invalid intra-handover time ............................................................. 2-1198
2.24.126 MAX count of invalid intra-handover................................................2-1200
2.24.127 MAX path loss threshold on force handover.....................................2-1201
2.24.128 MAX time advance threshold on force handover ..............................2-1203
2.24.129 N value of force handover ..............................................................2-1205
2.24.130 P value of force handover...............................................................2-1207
2.24.131 Level offset for PBGT to up layer ....................................................2-1209
2.24.132 Level offset for PBGT to low layer ...................................................2-1210
2.24.133 Lag time for PBGT between different layers.....................................2-1212
2.24.134 The threshold for starting PBGT handover.......................................2-1213
2.24.135 The priority of the handover from Macro cell to Micro cell .................2-1214
2.24.136 Handover from macro to micro........................................................2-1215
2.24.137 Hysteresis timer when traffic handover ............................................2-1217
2.24.138 Downlink rapid handover offset of high speed ..................................2-1218
2.24.139 Downlink rapid handover offset of middle speed ..............................2-1219
2.24.140 Downlink rapid handover offset of low speed ...................................2-1220
2.24.141 Handover back penalty ..................................................................2-1222
2.24.142 MIN interval between inter-cell emergency handover .......................2-1223
2.24.143 Handover back penalty after emergency handover...........................2-1224
2.24.144 Neighbour cell for emergency handover ..........................................2-1226
2.24.145 Downlink rapid quality drop THS ....................................................2-1227
2.24.146 Downlink rapid quality drop Value N ................................................2-1228
2.24.147 Quality weight of recent measure value ...........................................2-1230
2.24.148 Level weight of recent measurement value level ..............................2-1231
2.24.149 Penalty time for handover caused
by interference
.........................................................................................................2-1232
XXVIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.150 Interference band requirement for intracell handover caused by

interference .......................................................................................2-1233
2.24.151 Prefer layer for traffic handover.......................................................2-1234
2.24.152 PBGT offset of prefer layer for traffic handover ................................2-1236
2.24.153 Prefer band for traffic handover ......................................................2-1237
2.24.154 PBGT offset of prefer band
for traffic handover
.........................................................................................................2-1238
2.24.155 The threshold for starting Downlink Rapid handover.........................2-1240
2.24.156 High speed threshold .....................................................................2-1241
2.24.157 Middle speed threshold ..................................................................2-1242
2.24.158 The minimum interval of direction handover.....................................2-1243
2.24.159 The ncell offset for downlink rapid handover ....................................2-1245
2.24.160 The offset of ncell in the same direction...........................................2-1246
2.24.161 Allow signal quality handover on TCH(High speed) ..........................2-1247
2.24.162 Allow signal quality handover on TCH(Middle speed) .......................2-1248
2.24.163 Allow signal quality handover on TCH(Low speed)...........................2-1249
2.24.164 Handover Threshole of Mean Bit Error Probability on TCH ...............2-1250
2.24.165 Handover P Number of Mean Bit Error Probability on TCH ...............2-1252
2.24.166 Handover N Number of Mean Bit Error Probability on TCH ...............2-1253
2.24.167 Handover Threshole of CV Bit Error Probability on TCH ...................2-1254
2.24.168 Handover P Number of CV Bit Error Probability on TCH ...................2-1255
2.24.169 Handover N Number of CV Bit Error Probability on TCH...................2-1256
2.24.170 Is Dual-Frequency Traffic Handover Support ...................................2-1257
2.24.171 Dual-Frequency Handover Parameter N..........................................2-1258
2.24.172 Dual-Frequency Handover Parameter P..........................................2-1259
2.24.173 Dual-Frequency Handover TA Threshold.........................................2-1261
2.24.174 Dual-Frequency Handover RxLevel Threshold.................................2-1262
2.24.175 Circuit data handover control ..........................................................2-1263
2.24.176 Back to Source Cell when PBGT Handover .....................................2-1264
2.24.177 Back to Source Cell when Other Handover......................................2-1265
2.24.178 HoAccess Require Rxlevel offset ....................................................2-1266
2.24.179 HoAccess Require Rxlevel Select Strategy when Other
Handover ..........................................................................................2-1268
2.24.180 Dual-Frequency Traffic Handover Threshold....................................2-1269
2.24.181 Back to Source Cell when MSC Controlled Incoming Handover ........2-1270
2.24.182 Good level and bad quality handover enable ...................................2-1272
2.24.183 Good level and bad quality handover DL Level ................................2-1273
XXIX
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.184 HoAccess Require CI ....................................................................2-1274

2.24.185 Signal quality handover with cv_bep ...............................................2-1275
2.24.186 Handover Threshold of Mean Bit Error Probability High ....................2-1276
2.25 SDCCH Handover Control(GSdHandoverControl) .........................................2-1277
2.25.1 SDCCH Handover Control ID .............................................................2-1277
2.25.2 Allow Distance SDCCH handover(High Speed) ...................................2-1278
2.25.3 Allow PBGT SDCCH handover(High Speed) .......................................2-1280
2.25.4 Allow rapid SDCCH handover(High Speed).........................................2-1281
2.25.5 Allow quality SDCCH handover in uplink(High Speed) .........................2-1282
2.25.6 Allow level SDCCH handover in uplink(High Speed) ............................2-1283
2.25.7 Allow quality SDCCH handover in downlink(High Speed) .....................2-1284
2.25.8 Allow level SDCCH handover in downlink(High Speed) ........................2-1285
2.25.9 Downlink rapid SDCCH handover enable(High Speed) ........................2-1286
2.25.10 Downlink rapid quality drop THS(High Speed) ...................................2-1287
2.25.11 Allow Distance SDCCH handover(Middle Speed)...............................2-1289
2.25.12 Allow PBGT SDCCH handover(Middle Speed) ..................................2-1290
2.25.13 Allow rapid SDCCH handover(Middle Speed) ....................................2-1291
2.25.14 Allow quality SDCCH handover in uplink(Middle Speed).....................2-1292
2.25.15 Allow level SDCCH handover in uplink(Middle Speed) .......................2-1293
2.25.16 Allow quality SDCCH handover in downlink(Middle Speed) ................2-1294
2.25.17 Allow level SDCCH handover in downlink(Middle Speed) ...................2-1295
2.25.18 Downlink rapid SDCCH handover enable(Middle Speed) ...................2-1297
2.25.19 Downlink rapid quality drop THS(Middle Speed) ................................2-1298
2.25.20 Allow SDCCH handover ...................................................................2-1299
2.25.21 Allow Distance SDCCH handover(Low Speed) ..................................2-1300
2.25.22 Allow PBGT SDCCH handover(Low Speed) ......................................2-1301
2.25.23 Allow dynamic adjustment of SDCCH handover priority......................2-1302
2.25.24 Allow rapid SDCCH handover(Low Speed)........................................2-1303
2.25.25 Allow quality SDCCH handover in uplink(Low Speed) ........................2-1304
2.25.26 Allow level SDCCH handover in uplink(Low Speed) ...........................2-1306
2.25.27 Allow quality SDCCH handover in downlink(Low Speed) ....................2-1307
2.25.28 Allow level SDCCH handover in downlink(Low Speed).......................2-1308
2.25.29 Downlink rapid SDCCH handover enable(Low Speed) .......................2-1309
2.25.30 Downlink rapid quality drop THS(Low Speed) ....................................2-1310
2.25.31 Perform PBGT SDCCH handover by Directed retry(Low Speed).........2-1312
2.25.32 Uplink power level Sample count ......................................................2-1313
2.25.33 Downlink power level Sample count..................................................2-1314
XXX
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.34 Uplink quality Sample count .............................................................2-1316

2.25.35 Downlink quality Sample count .........................................................2-1317
2.25.36 Distance Sample count ....................................................................2-1318
2.25.37 Neighboring cell Sample count .........................................................2-1320
2.25.51 Rapid handover Threshold ...............................................................2-1343
2.25.52 Rapid handover Value N ..................................................................2-1344
2.25.56 Downlink rapid handover offset of high speed....................................2-1350
2.25.57 Downlink rapid handover offset of middle speed ................................2-1351
2.25.58 Downlink rapid handover offset of low speed .....................................2-1352
2.25.61 Downlink rapid quality drop THS ......................................................2-1356
2.25.62 Downlink rapid quality drop Value N ..................................................2-1357
2.25.63 Neighbour cell for emergency handover ............................................2-1359
2.25.64 Allow signal quality handover on SDCCH(High speed) .......................2-1360
2.25.65 Allow signal quality handover on SDCCH(Middle speed) ....................2-1361
2.25.66 Allow signal quality handover on SDCCH(Low speed)........................2-1362
2.25.67 Handover Threshold of Mean Bit Error Probability on SDCCH ............2-1363
2.25.68 Handover Value P of Mean Bit Error Probability on SDCCH................2-1365
2.25.69 Handover Value N of Mean Bit Error Probability on SDCCH ...............2-1366
2.25.70 Handover Threshold of CV Bit Error Probability on SDCCH ................2-1367
XXXI
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.71 Handover P Number of CV Bit Error Probability on SDCCH................2-1368

2.25.72 Handover N Number of CV Bit Error Probability on SDCCH................2-1369
2.25.73 Back to Source Cell when PBGT Handover .......................................2-1370
2.25.74 Back to Source Cell when Other
Handover
.........................................................................................................2-1372
2.25.75 HoAccess Require Rxlevel offset ......................................................2-1373
2.25.76 HoAccess Require Rxlevel Select
Strategy when Other Handover
.........................................................................................................2-1374
2.25.77 Back to Source Cell when MSC Controlled Incoming Handover ..........2-1376
2.25.78 Good level and bad quality handover enable .....................................2-1377
2.25.79 Good level and bad quality handover DL Level ..................................2-1378
2.25.80 HoAccess Require CI ......................................................................2-1379
2.25.81 SD signal quality handover with cv_bep ............................................2-1380
2.25.82 SD Handover Threshole of Mean Bit Error Probability High ................2-1382
2.26 VAMOS Configuration(GVamos)...................................................................2-1383
2.26.1 VAMOS Configuration ID ...................................................................2-1383
2.26.2 If support VAMOS..............................................................................2-1384
2.26.3 If support MUTE SAIC detection .........................................................2-1385
2.26.4 If support SAIC AFC detection............................................................2-1386
2.26.5 The priority level of VAMOS pairing ....................................................2-1388
2.26.6 The load of start VAMOS FR pairing ...................................................2-1389
2.26.7 The load of start VAMOS HR pairing...................................................2-1390
2.26.8 The level threshold of Vamos pairing ..................................................2-1391
2.26.9 The quality threshold of Vamos pairing................................................2-1392
2.26.10 The pass loss ratio of candidates......................................................2-1394
2.26.11 The expected received level .............................................................2-1395
2.26.12 The uplink SCPIR threshold .............................................................2-1396
2.26.13 The downlink SCPIR threshold of NON-SAIC MS ..............................2-1397
2.26.14 The downlink SCPIR threshold of SAIC MS.......................................2-1399
2.26.15 The downlink SCPIR threshold of SAIC AFC MS ...............................2-1401
2.26.16 The downlink SCPIR threshold of VAMOS I MS.................................2-1402
2.26.17 The downlink SCPIR threshold of VAMOS II MS ................................2-1404
2.26.18 Support VAMOS II ...........................................................................2-1406
2.26.19 P value of pair process.....................................................................2-1407
2.26.20 N value of pair process ....................................................................2-1408
XXXII
SJ-20140527134815-013|2015-03-10(R1.1)
2.26.21 The downlink SCPIR threshold of MUTE SAIC MS ............................2-1409

2.26.22 The load of VAMOS pair release....................................................... 2-1411
2.26.23 Support handover from VAMOS FR to VAMOS HR ............................2-1412
2.26.24 Support pair release due to quality....................................................2-1413
2.26.25 Uplink receive quality of pair-release threshold ..................................2-1414
2.26.26 Downlink receive quality of pair-release threshold..............................2-1416
2.26.27 P value of pair-release uplink quality .................................................2-1417
2.26.28 N value of pair-release uplink quality.................................................2-1418
2.26.29 P value of pair-release downlink quality.............................................2-1419
2.26.30 N value of pair-release downlink quality ............................................2-1420
2.26.31 VAMOS Pair Selecting .....................................................................2-1421
2.26.32 P value of MS capability predetect ....................................................2-1422
2.26.33 N value of MS capability predetect ....................................................2-1424
2.26.34 High level threshold of MS capability detect.......................................2-1425
2.26.35 Low level threshold of MS capability detect .......................................2-1426
2.26.36 the level power control switch of MS capability detect ........................2-1427
2.26.37 SAIC AFC power control switch ........................................................2-1428
2.26.38 the period of SAIC AFC power control ..............................................2-1429
2.26.39 the alpha value of SAIC AFC power control ......................................2-1430
2.26.40 AFC detect switch of MUTE SAIC.....................................................2-1431
2.27 UTRAN Measurement(GUtranMeasure)........................................................2-1433
2.27.1 UTRAN Measurement ID ...................................................................2-1433
2.27.2 Require UE to send UTRAN class-mark change message early ...........2-1434
2.27.3 Channel location of si2quater broadcast..............................................2-1435
2.27.4 CS measurement type reported by UE................................................2-1436
2.27.5 CS number of same frequency adjacent cells in report.........................2-1438
2.27.6 Measurement threshold of UE performing UTRAN cell reselection........2-1439
2.27.7 FDD reselection offset .......................................................................2-1440
2.27.8 Min Ec/No of UTRAN reselecting cell..................................................2-1442
2.27.9 Initial parameter instead of qsearch_c before UE receiving
qsearch_C.........................................................................................2-1443
2.27.10 Threshold when UE performs search under dedicated mode ..............2-1444
2.27.11 CS class of reported quantities of UTRAN adjacent cells ....................2-1446
2.27.12 Max number of UTRAN/FDD adjacent cells in measurement
report(CS) .........................................................................................2-1447
2.27.13 Measurement threshold of UE performing GPRS UTRAN
cell_0/Measurement threshold of UE performing GPRS UTRAN
cell_1 ................................................................................................2-1448
XXXIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.27.14 FDD GPRS reselection offset_0/FDD GPRS reselection offset_1 .......2-1449

2.27.15 TDD GPRS reselection offset_0/TDD GPRS reselection offset_1 .......2-1451
2.27.16 PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No of UTRAN
reselecting cell_1 ...............................................................................2-1452
2.27.17 FDD_QminPS Offset_0/FDD_QminPS Offset_1 ................................2-1453
2.27.18 PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP of UTRAN
reselecting cell_1 ...............................................................................2-1454
2.27.19 Measurement report threshold of Ec/No or RSCP(PS) .......................2-1455
2.27.20 CS measurement reporting rate of adjacent cell.................................2-1456
2.27.21 CS UE report invalid cell level allowed ..............................................2-1458
2.27.22 MulBndRprtCS ................................................................................2-1459
2.27.23 CS offset which is added when UE reports rxlev value .......................2-1460
2.27.24 GSM900M Adjacent cell reporting signal level Offset .........................2-1461
2.27.25 GSM900M Adjacent cell reporting signal level Threshold ...................2-1462
2.27.26 GSM1800M Adjacent cell reporting signal level Offset........................2-1463
2.27.27 GSM1800M Adjacent cell reporting signal level Threshold..................2-1464
2.27.28 GSM1900M Adjacent cell reporting signal level Offset........................2-1465
2.27.29 GSM1900M Adjacent cell reporting signal level Threshold..................2-1466
2.27.30 UTRAN/FDD Adjacent cell reporting signal level Offset ......................2-1467
2.27.31 UTRAN/FDD Adjacent cell reporting signal level Threshold ................2-1468
2.27.32 Reporting threshold for the Ec/No or RSCP that is not reported ..........2-1469
2.27.33 CS UE search UTRAN adjacent cell in BSIC decoding frame
indication...........................................................................................2-1471
2.27.34 GSM850M Adjacent cell reporting signal level Threshold ...................2-1472
2.27.35 GSM850M Adjacent cell reporting signal level Offset .........................2-1473
2.27.36 TDD reselection offset .....................................................................2-1474
2.27.37 Max number of UTRAN/TDD adjacent cells in measurement
report(CS) .........................................................................................2-1475
2.27.38 UTRAN/TDD Adjacent cell reporting signal level Offset ......................2-1476
2.27.39 UTRAN/TDD Adjacent cell reporting signal level Threshold ................2-1477
2.27.40 PS measurement type reported by UE ..............................................2-1478
2.27.41 PS number of same frequency adjacent cells in report ......................2-1479
2.27.42 PS class of reported quantities of UTRAN adjacent cells ....................2-1480
report(PS) .........................................................................................2-1482
2.27.44 PS measurement reporting rate of adjacent cell.................................2-1483
2.27.45 PS UE report invalid cell level allowed ..............................................2-1484
2.27.46 PS multi-band report indication .........................................................2-1485
XXXIV
SJ-20140527134815-013|2015-03-10(R1.1)
2.27.47 PS offset which is added when UE reports RXLEV value ...................2-1486

2.27.48 GSM 900 Offset(PS) ........................................................................2-1488
2.27.49 GSM 900 Threshold(PS) ..................................................................2-1489
2.27.50 GSM 1800 Offset(PS) ......................................................................2-1490
2.27.51 GSM 1800 Threshold(PS) ................................................................2-1491
2.27.52 GSM 1900 Offset(PS) ......................................................................2-1492
2.27.53 GSM 1900 Threshold(PS) ................................................................2-1493
2.27.54 UTRAN/FDD Offset .........................................................................2-1494
2.27.55 UTRAN/FDD Threshold ...................................................................2-1495
2.27.56 PS UE search UTRAN adjacent cell in basic decoding frame
indication...........................................................................................2-1496
2.27.57 GSM 850 Threshold(PS) ..................................................................2-1497
2.27.58 GSM 850 Offset(PS) ........................................................................2-1498
report(PS) .........................................................................................2-1499
2.27.60 UTRAN/TDD Offset .........................................................................2-1501
2.27.61 UTRAN/TDD Threshold ...................................................................2-1502
2.27.62 Reselect priority control of 2G/3G .....................................................2-1503
2.27.63 Max Number In Adjacent GSM cell ...................................................2-1504
2.27.64 A minimum threshold of RSCP for UTRAN FDD cell re-selection ........2-1505
2.27.65 Applies an offset to FDD_Qmin value................................................2-1506
2.27.66 Service UTRAN CCO support...........................................................2-1507
2.27.67 Signal strength and load and capacity priority ....................................2-1508
2.27.68 Signal strength threshold..................................................................2-1509
2.27.69 Load threshold ................................................................................ 2-1511
2.27.70 Available capacity threshold .............................................................2-1512
2.28 E-UTRAN Measurement(GEutranMeasure)...................................................2-1513
2.28.1 E-UTRAN Measurement ID ................................................................2-1513
qsearch_C.........................................................................................2-1514
2.28.3 Class of reported quantities of E-UTRAN adjacent cells .......................2-1515
2.28.4 Max number of E-UTRAN adjacent cells in measurement report...........2-1516
2.28.5 FDD Measurement report threshold of RSRP or RSRQ in 6-bit.............2-1517
2.28.6 FDD Measurement report threshold of RSRQ or RSRP in 6-bit
reporting............................................................................................2-1518
2.28.7 TDD Measurement report threshold of RSRP or RSRQ in 6-bit
reporting............................................................................................2-1520
XXXV
SJ-20140527134815-013|2015-03-10(R1.1)
2.28.8 TDD Measurement report threshold of RSRQ or RSRP in 6-bit

reporting............................................................................................2-1521
2.28.9 FDD Measurement report threshold of RSRP or RSRQ in 3-bit
reporting............................................................................................2-1522
2.28.10 FDD Measurement report threshold of RSRQ or RSRP in 3-bit
reporting............................................................................................2-1523
2.28.11 TDD Measurement report threshold of RSRP or RSRQ in 3-bit
reporting............................................................................................2-1524
2.28.12 TDD Measurement report threshold of RSRQ or RSRP in 3-bit
reporting............................................................................................2-1525
2.28.13 Measurement report threshold offset of RSRQ or RSRP in 3-bit
reporting............................................................................................2-1527
2.28.14 Measurement threshold of UE performing GPRS E-UTRAN Cell ........2-1528
2.28.15 GPRS max number of E-UTRAN adjacent cells in measurement
report ................................................................................................2-1529
2.28.16 GPRS class of reported quantities of E-UTRAN adjacent cells............2-1530
2.28.17 GPRS FDD Measurement report threshold of RSRP or RSRQ ...........2-1531
2.28.18 GPRS FDD Measurement report threshold of RSRQ or RSRP ...........2-1532
2.28.19 GPRS TDD Measurement report threshold of RSRP or RSRQ ...........2-1534
2.28.20 GPRS TDD Measurement report threshold of RSRQ or RSRP ...........2-1535
2.28.21 RxLevel Threshold for Measure E-UTRAN Neighbour Cell In
Dedicated Mode.................................................................................2-1536
2.28.22 Slippery window size for calculating average value of E-Utran
Neighbour Cell ..................................................................................2-1537
2.28.23 offset to the reported value when prioritizing the FDD E-UTRAN cells
for 6bit reporting.................................................................................2-1539
2.28.24 offset to the reported value when prioritizing the TDD E-UTRAN cells
for PS................................................................................................2-1543
for PS................................................................................................2-1544
2.28.29 Service E-UTRAN CCO ...................................................................2-1545
2.28.30 Measurement threshold of UE performing GPRS E-UTRAN Cell in
packet transfer mode..........................................................................2-1547
XXXVI
SJ-20140527134815-013|2015-03-10(R1.1)
2.28.31 GPRS max number of E-UTRAN adjacent cells in measurement report

in packet transfer mode ......................................................................2-1548
2.28.32 GPRS class of reported quantities of E-UTRAN adjacent cells in
2.28.33 GPRS FDD Measurement report threshold of RSRP or RSRQ in
2.28.34 GPRS FDD Measurement report threshold of RSRQ or RSRP in
2.28.35 GPRS TDD Measurement report threshold of RSRP or RSRQ in
2.28.36 GPRS TDD Measurement report threshold of RSRQ or RSRP in
2.28.37 offset to the reported value when prioritising the FDD E-UTRAN cells
for PS in packet transfer mode............................................................2-1556
2.28.38 offset to the reported value when prioritising the TDD E-UTRAN cells
for PS in packet transfer mode............................................................2-1557
2.29 UTRAN Handover Control(GUtranHandoverControl)......................................2-1558
2.29.1 UTRAN Handover Control ID .............................................................2-1558
2.29.2 Inter system handover supported........................................................2-1559
2.29.3 Punishment period of UTRAN cell when handover failure.....................2-1560
2.29.4 Slippery window size for calculating Ec/No or RSCP average value to
be zero..............................................................................................2-1562
2.29.5 Number that measurement value allowed to be zero............................2-1563
2.29.6 Handover from GSM to UTRAN FDD RSCP Threshold ........................2-1564
2.29.7 Handover from GSM to UTRAN FDD RSCP Value P ...........................2-1565
2.29.8 Handover from GSM to UTRAN FDD RSCP Value N ...........................2-1566
2.29.9 Handover from GSM to UTRAN FDD Ec/No Threshold ........................2-1567
2.29.10 Handover from GSM to UTRAN FDD Ec/No Value P..........................2-1569
2.29.11 Handover from GSM to UTRAN FDD Ec/No Value N..........................2-1570
2.29.12 Directed retry to UTRAN cell allowed ................................................2-1571
2.29.13 FDD/TDD handover .........................................................................2-1572
2.29.14 UTRAN handover ............................................................................2-1573
2.29.15 Handover from GSM to UTRAN TDD RSCP Threshold ......................2-1574
2.29.16 Handover from GSM to UTRAN TDD RSCP Value N .........................2-1575
2.29.17 Handover from GSM to UTRAN TDD RSCP Value P .........................2-1576
2.29.18 RSCP threshold when handover from GSM to FDD for load
sharing ..............................................................................................2-1578
2.29.19 Ec/No threshold when handover from GSM to 3G for load sharing ......2-1579
XXXVII
SJ-20140527134815-013|2015-03-10(R1.1)
2.29.20 RSCP threshold when handover from GSM to TDD for load
sharing ..............................................................................................2-1580
2.29.21 Penalty time of handover failure(PS) .................................................2-1581
2.29.22 Window of calculating 3G cell(PS) ....................................................2-1583
2.29.23 Support PS handover of Inter-System(PS) ........................................2-1584
2.29.24 Number of zero in measure result(PS) ..............................................2-1585
2.29.25 Priority to FDD or TDD(PS) ..............................................................2-1586
2.29.26 RSCP threshold to FDD in load handover(PS)...................................2-1587
2.29.27 Ec/No threshold to FDD in load handover(PS) ...................................2-1589
2.29.28 RSCP threshold to TDD in load handover(PS)...................................2-1590
2.29.29 RSCP threshold to FDD(PS) ............................................................2-1591
2.29.30 P of handovering to FDD by RSCP(PS) ............................................2-1592
2.29.31 N of handovering to FDD by RSCP(PS) ............................................2-1594
2.29.32 EcNo threshold to FDD(PS) .............................................................2-1595
2.29.33 P of handovering to FDD by EcNo(PS)..............................................2-1596
2.29.34 N of handovering to FDD by EcNo(PS) .............................................2-1597
2.29.35 RSCP threshold to TDD(PS) ............................................................2-1598
2.29.36 N of handovering to TDD by RSCP(PS) ............................................2-1599
2.29.37 P of handovering to TDD by RSCP ...................................................2-1601
2.29.38 2110~2170M frequency band permitted for traffic handover(FDD).......2-1602
2.29.39 925~960M frequency band permitted for traffic handover(FDD) ..........2-1603
2.29.40 869~894M frequency band permitted for traffic handover(FDD) ..........2-1604
2.29.41 Other Frequency band permitted for traffic handover(FDD).................2-1605
2.29.42 2010~2025M frequency band permitted for traffic handover(TDD) ......2-1606
2.29.43 1880~1900M frequency band permitted for traffic handover(TDD) ......2-1607
2.29.44 Other Frequency band permitted for traffic handover(TDD).................2-1608
2.29.45 Support Handover to 3G Cell Base on Cell load.................................2-1610
2.30 Site(GBtsSiteManager) ................................................................................ 2-1611
2.30.1 Site ID .............................................................................................. 2-1611
2.30.2 GBtsEquipment DN ...........................................................................2-1612
2.30.3 Config Paging Repeat Support ...........................................................2-1613
2.30.4 Inter SubCell handover permitted .......................................................2-1614
2.30.5 Support new abis ps message............................................................2-1616
2.30.6 The Abis band limit of HR priority........................................................2-1617
2.30.7 The Abis band of HO from FR to HR...................................................2-1618
2.30.8 Minimal number of idle E1 Abis Timeslot .............................................2-1619
2.30.9 Minimal of usable IP Abis bandwidth...................................................2-1620
2.30.10 the master power control option for Base Transceiver Station .............2-1621
XXXVIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.30.11 the delay time of master power Off....................................................2-1622

2.30.12 the delay time of Transceivers Off.....................................................2-1623
2.30.13 the Percent for Transceivers Off .......................................................2-1624
2.30.14 the GNode id for master power control ..............................................2-1626
2.30.15 Benchmark Site ...............................................................................2-1627
2.31 Site baseband share Configuration(GSiteBaseBandShare) ............................2-1628
2.31.1 Site baseband share Configuration ID.................................................2-1628
2.31.2 Baseband resource share support ......................................................2-1629
2.31.3 Traffic threshold for allocate baseband................................................2-1630
2.31.4 Traffic threshold for release baseband ................................................2-1631
2.31.5 Channel busy threshold for urgent allocate baseband ..........................2-1632
2.31.6 Channel busy threshold for urgent release baseband...........................2-1633
2.32 Bvc (GBvc) .................................................................................................2-1635
2.32.1 Bvc ID ..............................................................................................2-1635
2.32.2 BvcI..................................................................................................2-1636
2.32.3 FR NSE DN ......................................................................................2-1637
2.32.4 IP NSE DN........................................................................................2-1638
2.33 GPRS Configuration(GCellPs)......................................................................2-1639
2.33.1 GPRS Configuration ID......................................................................2-1639
2.33.2 T3168...............................................................................................2-1640
2.33.3 T3192...............................................................................................2-1642
2.33.4 T3193...............................................................................................2-1644
2.33.5 DRX mode holding timer ....................................................................2-1646
2.33.6 MAX blocks transmission in each TS ..................................................2-1648
2.33.7 Packet control acknowledgement type ................................................2-1650
2.33.8 Access burst type ..............................................................................2-1651
2.33.9 N3102 decrease step.........................................................................2-1652
2.33.10 N3102 increase step ........................................................................2-1654
2.33.11 N3102 max......................................................................................2-1656
2.33.12 Route area color code......................................................................2-1657
2.33.13 Extended measurement report order.................................................2-1659
2.33.14 Network control order.......................................................................2-1660
2.33.15 CCCH SplitPGCycle support ............................................................2-1661
2.33.16 Packet access priority threshold .......................................................2-1663
2.33.17 USF granularity ...............................................................................2-1664
2.33.18 Cell support extended uplink TBF .....................................................2-1665
2.33.19 Extended uplink dynamic allocation support ......................................2-1666
XXXIX
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.20 Uplink delay time .............................................................................2-1667

2.33.21 Downlink delay time.........................................................................2-1669
2.33.22 Extended uplink TBF time ................................................................2-1670
2.33.23 RRBP Interval of GPRS downlink TBF ..............................................2-1671
2.33.24 Interval number of uplink GPRS TBF's ACK ......................................2-1672
2.33.25 Uplink measurement report period ....................................................2-1673
2.33.26 T3142 .............................................................................................2-1674
2.33.27 T3172 .............................................................................................2-1676
2.33.28 Max times of packet assignment resend............................................2-1677
2.33.29 Enable no data during extended uplink TBF mode .............................2-1679
2.33.30 Initial Coding Scheme of GPRS uplink TBF .......................................2-1680
2.33.31 Initial Coding Scheme of GPRS downlink TBF...................................2-1681
2.33.32 Maximum coding scheme of GPRS uplink TBF..................................2-1682
2.33.33 Maximum coding scheme of GPRS downlink TBF .............................2-1683
2.33.34 PS preemption support ....................................................................2-1685
2.33.35 PS queuing support .........................................................................2-1686
2.33.36 Resource adjust threshold................................................................2-1687
2.33.37 GDpiAppSrv DN ..............................................................................2-1689
2.33.38 Downlink TBF pre-establish support..................................................2-1690
2.33.39 PS channel alloc reduction support ...................................................2-1691
2.33.40 Initial limit threshold of PDTCH alloc .................................................2-1692
2.33.41 Medium limit threshold of PDTCH alloc .............................................2-1693
2.33.42 Maximum limit threshold of PDTCH alloc...........................................2-1695
2.33.43 Damping of PDTCH alloc from limit to non-limit..................................2-1696
2.33.44 GPRS phones init. Code can be changed .........................................2-1697
2.33.45 C/I ..................................................................................................2-1698
2.33.46 ARP................................................................................................2-1699
2.33.47 THP................................................................................................2-1701
2.33.48 Maximal resource for POC service....................................................2-1702
2.33.49 Gprs Initial access rate.....................................................................2-1704
2.33.50 Downlink Delay Signal TBF Time......................................................2-1705
2.33.51 Extended uplink Signal TBF time ......................................................2-1706
2.33.52 Support splitting uplink tcp ack datagram ..........................................2-1707
2.33.53 Support copying uplink tcp ack datagram ..........................................2-1709
2.33.54 Support discarding duplicate uplink tcp ack datagram ........................2-1710
2.33.55 TrxPSBusyThs ................................................................................ 2-1711
2.33.56 Cn ..................................................................................................2-1713
XL
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.57 Nn ..................................................................................................2-1715
2.33.58 Xn ..................................................................................................2-1717
2.33.59 Sending PSI13 or not.......................................................................2-1719
2.33.60 Indicate Uplink and Downlink RLC Window Size value .......................2-1720
2.33.61 Packet Neighbour Cell Data message sending times indication ..........2-1721
2.33.62 One phase access initial code selection ............................................2-1723
2.33.63 Two phase access initial code selection ............................................2-1724
2.33.64 Initial GPRS code scheme at one phase access ................................2-1725
2.33.65 support downlink five timeslots .........................................................2-1726
2.33.66 Optimize pending block in downlink transfer state ..............................2-1727
2.33.67 Optimize dummy block in downlink delay state ..................................2-1728
2.33.68 Times of interval that send downlink dummy block .............................2-1729
2.33.69 DTM MultiSlot Class 11 extended dynamic allocation .........................2-1730
2.33.70 support uplink tbf early establishment ...............................................2-1731
2.33.71 support DTM of sub channel 1 in VAMOS..........................................2-1733
2.33.72 support TBF multiplexing of active TBF ............................................2-1734
2.33.73 SPID based inter-RAT cell reselection priority....................................2-1735
2.33.74 T3230 .............................................................................................2-1736
2.33.75 DPI Support ....................................................................................2-1737
2.33.76 Highest coding scheme of signal TBF ...............................................2-1739
2.33.77 Two-phase access...........................................................................2-1740
2.33.78 optimize block schedule ...................................................................2-1741
2.33.79 Indication of different reselection parameters in packet idle mode and
2.33.80 GPRS Uplink Init. Coding Scheme in subcell2 ...................................2-1743
2.33.81 GPRS Downlink Init. Coding Scheme in subcell2...............................2-1745
2.33.82 GPRS Uplink Max. Coding Scheme in subcell2 .................................2-1746
2.33.83 GPRS Downlink Max. Coding Scheme in subcell2.............................2-1747
2.33.84 Rate control of large throughput service ............................................2-1748
2.33.85 The large throughput traffic enhance threshold ..................................2-1749
2.33.86 Matched HTTP IP resource adjustment threshold ..............................2-1751
2.33.87 Expected rate ..................................................................................2-1752
2.33.88 Adaptive rate adjustment amplifier step.............................................2-1753
2.33.89 Adaptive rate adjustment amplifier step.............................................2-1754
2.33.90 Adaptive rate adjustment periodic execution schedule .......................2-1755
2.33.91 Adaptive rate adjustment period .......................................................2-1757
2.33.92 Adaptive start rate ...........................................................................2-1758
2.33.93 Adaptive rate allowed up and down...................................................2-1759
XLI
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.94 Indication of drop rate ......................................................................2-1760

2.33.95 continous adaptive adjustment number to judge invalid adjustment ......2-1761
2.33.96 The Maximun Adjustment number ....................................................2-1763
2.33.97 Initial Packet uplink ack priority to send .............................................2-1764
2.34 PS Channel Schedule Configuration(GPsChannelSchedule) ..........................2-1765
2.34.1 PS Channel Schedule Configuration ID...............................................2-1765
2.34.2 Minimal number of idle CS channel.....................................................2-1766
2.34.3 PS preempt CS support .....................................................................2-1767
2.34.4 CS subscriber moving support............................................................2-1768
2.34.5 EDGE initial downlink allocation by multislot class1 .............................2-1770
2.34.6 GPRS initial downlink allocation by multislot class1 .............................2-1771
2.34.7 PS channel expand support ...............................................................2-1772
2.34.8 Threshold of idle tch for PS channel expand........................................2-1774
2.34.9 PS busy threshold .............................................................................2-1775
2.34.10 Maximum PS uplink user per ts ........................................................2-1776
2.34.11 Max PS downlink user per TS...........................................................2-1778
2.34.12 Multislot allocation of extended range cell support .............................2-1779
2.34.13 Initial priority direction of multislot capability.......................................2-1780
2.34.14 Support the discontinuous PDTCH allocation ....................................2-1781
2.34.15 Support CS preempt PS optimization ................................................2-1783
2.34.16 support DTM High Multislot ..............................................................2-1784
2.34.17 PS channel Minimal Percentage of subcell 1 .....................................2-1785
2.34.18 Minimal number of idle CS channel of subcell 2 .................................2-1786
2.34.19 SubCell2 support CS Idel channel reserve ........................................2-1787
2.34.20 PS channel Minimal Percentage of subcell 2 .....................................2-1788
2.35 GPRS-EDGE Schedule Configuration(GGprsEdgeSchedule) .........................2-1790
2.35.1 GPRS-EDGE Schedule Configuration ID ............................................2-1790
2.35.2 Subscriber occupying other preference channel support ......................2-1791
2.35.3 PS subscriber moving out of other preference channel support.............2-1792
2.35.4 Threshold of GPRS/GPRS,EDGE/EDGE service moving .....................2-1793
2.35.5 Threshold of GPRS/EDGE service moving ..........................................2-1795
2.35.6 Use parameter of 'EGPRS Prior to GPRS' in Cell ................................2-1797
2.35.7 Allocating weights of EGPRS .............................................................2-1798
2.36 NACC Configuration(GNACC)......................................................................2-1799
2.36.1 NACC Configuration ID......................................................................2-1799
2.36.2 CCN mode support............................................................................2-1801
2.36.3 Cell support system message status flow ............................................2-1802
XLII
SJ-20140527134815-013|2015-03-10(R1.1)
2.36.4 3G NACC support .............................................................................2-1804

2.37 NC2 Configuration(GCellPsNc2) ..................................................................2-1805
2.37.1 NC2 Configuration ID.........................................................................2-1805
2.37.2 Cell reselection offset in idle...............................................................2-1806
2.37.3 Cell reselection temporary offset in idle ...............................................2-1808
2.37.4 Penalty time of cell reselection in idle..................................................2-1809
2.37.5 Interval of reselecting the same cell in idle ..........................................2-1810
2.37.6 Threshold of HSC signal level in idle................................................... 2-1811
2.37.7 HCS Priority in idle ............................................................................2-1813
2.37.8 C31 hysteresis in idle.........................................................................2-1814
2.37.9 GPRS cell reselection hysteresis in idle ..............................................2-1815
2.37.10 Routing reselection hysteresis in idle ................................................2-1817
2.37.11 Random access attempt permitted in idle ..........................................2-1818
2.37.12 Usage of cell reselection offset in idle ...............................................2-1819
2.37.13 GPRS access minimal signal level in idle ..........................................2-1821
2.37.14 HCS exist in idle ..............................................................................2-1822
2.37.15 GPRS MAX initial access signal level in idle ......................................2-1823
2.37.16 Cell reselection offset in transfer .......................................................2-1825
2.37.17 Cell reselection temporary offset in transfer .......................................2-1826
2.37.18 Penalty time of cell reselection in transfer..........................................2-1828
2.37.19 Interval of reselecting the same cell in transfer ..................................2-1829
2.37.20 Threshold of HSC signal level in transfer...........................................2-1830
2.37.21 HCS Priority in transfer ....................................................................2-1831
2.37.22 C31 hysteresis in transfer.................................................................2-1832
2.37.23 GPRS cell reselection hysteresis in transfer ......................................2-1834
2.37.24 Routing reselection hysteresis in transfer ..........................................2-1836
2.37.25 Random access attempt permitted in transfer ....................................2-1837
2.37.26 Usage of cell reselection offset in transfer .........................................2-1838
2.37.27 GPRS access minimal signal level in transfer ....................................2-1839
2.37.28 HCS exist in transfer ........................................................................2-1841
2.37.29 GPRS MAX initial access signal level in transfer ................................2-1842
2.37.30 NC hold time in non-drx mode ..........................................................2-1844
2.37.31 Packet idle mode .............................................................................2-1845
2.37.32 Packet transmission mode ...............................................................2-1847
2.37.33 Extended measurement report order.................................................2-1848
2.37.34 Type of extended measurement report ..............................................2-1850
2.37.35 Report period of extended measurement...........................................2-1851
XLIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.36 The size of test report's slip window ..................................................2-1852

2.37.37 Minimum measurement reports in slip window to avoid penalty...........2-1854
2.37.38 Enable uplink interference decision in NC2........................................2-1855
2.37.39 Enable downlink interference decision in NC2 ...................................2-1856
2.37.40 P of uplink interference decision in NC2 ...........................................2-1857
2.37.41 N of uplink interference decision in NC2 ............................................2-1858
2.37.42 P of downlink interference decision in NC2........................................2-1860
2.37.43 N of downlink interference decision in NC2........................................2-1861
2.37.44 NC2 uplink interference RxQual offset ..............................................2-1862
2.37.45 NC2 uplink interference RxLev offset ...............................................2-1864
2.37.46 NC2 downlink interference RxQual offset .........................................2-1866
2.37.47 NC2 downlink interference RxLev offset ...........................................2-1868
2.37.48 Num of samples that calculates average of uplink signal level in
NC2 ..................................................................................................2-1870
2.37.49 Num of samples that calculates average of downlink signal level in
NC2 ..................................................................................................2-1871
2.37.50 Num of samples that calculates average of uplink quality level in
NC2 ..................................................................................................2-1872
2.37.51 Num of samples that calculates average of downlink quality level in
NC2 ..................................................................................................2-1873
2.37.52 NC2 mode between 2G and 3G........................................................2-1875
2.37.53 Serving Cell Load Threshold ............................................................2-1876
2.37.54 Serving Cell Capacity Threshold.......................................................2-1877
2.37.55 Cell reselection control switch by serving cell traffic busy ...................2-1878
2.37.56 Is Dual-Frequency NC2 Support .......................................................2-1879
2.37.57 Dual-Frequency NC2 Parameter N ...................................................2-1881
2.37.58 Dual-Frequency NC2 Parameter P ...................................................2-1882
2.37.59 Dual-Frequency NC2 TA Threshold ..................................................2-1883
2.37.60 Dual-Frequency NC2 load Threshold ................................................2-1885
2.37.61 NC2 UL RxLevel Threshold ..............................................................2-1886
2.37.62 NC2 DL RxLevel Threshold ..............................................................2-1887
2.37.63 NC2 UL RxQual Threshold...............................................................2-1889
2.37.64 NC2 DL RxQual Threshold...............................................................2-1890
2.37.65 NC2 Distance Windows ...................................................................2-1891
2.37.66 Uplink RxLev Criteria .......................................................................2-1893
2.37.67 Downlink RxLev Criteria ...................................................................2-1894
2.37.68 Uplink RxQual Criteria .....................................................................2-1895
2.37.69 Downlink RxQual Criteria .................................................................2-1896
XLIV
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.70 PBGT Criteria..................................................................................2-1897

2.37.71 Distance Criteria..............................................................................2-1898
2.37.72 Cell change failure penalty time ........................................................2-1900
2.37.73 cell change failure penalty level offset ...............................................2-1901
2.37.74 invalid reassign time ........................................................................2-1902
2.37.75 invalid reassign maximum times .......................................................2-1904
2.37.76 Traffic cell change threshold .............................................................2-1905
2.37.77 Uplink RxLev N Value ......................................................................2-1906
2.37.78 Uplink RxLev P Value ......................................................................2-1907
2.37.79 Downlink RxLev N Value ..................................................................2-1908
2.37.80 Downlink RxLev P Value ..................................................................2-1909
2.37.81 Uplink RxQual N Value..................................................................... 2-1911
2.37.82 Uplink RxQual P Value.....................................................................2-1912
2.37.83 Downlink RxQual N Value ................................................................2-1913
2.37.84 Downlink RxQual P Value ................................................................2-1914
2.37.85 Distance N Value .............................................................................2-1915
2.37.86 Distance P Value .............................................................................2-1916
2.37.87 PBGT N Value.................................................................................2-1917
2.37.88 PBGT P Value .................................................................................2-1918
2.37.89 Indication for sending PNCD before NC2 PCCO................................2-1919
2.37.90 cell reselection by traffic ...................................................................2-1921
2.37.91 Support GSM to LTE NC2 ................................................................2-1922
2.38 DTM Configuration(GDTM) ..........................................................................2-1923
2.38.1 DTM Configuration ID ........................................................................2-1923
2.38.2 DTM support .....................................................................................2-1924
2.38.3 Support enhanced DTM capability ......................................................2-1925
2.38.4 Max number of GTTP lapdm frame.....................................................2-1926
2.39 PS Power Control(GPsPowerControl) ...........................................................2-1928
2.39.1 PS Power Control ID..........................................................................2-1928
2.39.2 Uplink power control strategy .............................................................2-1929
2.39.3 Downlink power control strategy .........................................................2-1930
2.39.4 Expected signal intensity of MS ..........................................................2-1931
2.39.5 Downlink Power Control Mode ...........................................................2-1933
2.39.6 Power Control Level ..........................................................................2-1934
2.39.7 Power descending of PDCH to BCCH in a mode .................................2-1935
2.39.8 Power control parameter....................................................................2-1936
2.39.9 Filter period in the packet idle mode ...................................................2-1937
XLV
SJ-20140527134815-013|2015-03-10(R1.1)
2.39.10 Filter period in packet transmission mode..........................................2-1938

2.39.11 Power control measurement channel ................................................2-1940
2.39.12 Filter constant of power control .........................................................2-1941
2.39.13 Max power reduction of CS1 ............................................................2-1942
2.39.17 Max power reduction of MCS1..........................................................2-1946
2.39.26 Window of averaging uplink signal ....................................................2-1956
2.39.27 Window of averaging downlink signal................................................2-1957
2.39.28 Window of averaging uplink quality ...................................................2-1958
2.39.29 Window of averaging downlink quality ...............................................2-1959
2.39.30 Threshold of uplink signal for increasing power..................................2-1961
2.39.31 Threshold of downlink signal for increasing power .............................2-1962
2.39.32 Threshold of uplink signal for decreasing power.................................2-1964
2.39.33 Threshold of downlink signal for decreasing power ............................2-1965
2.39.34 Threshold of uplink MEAN_BEP for increasing power in GPRS ..........2-1967
2.39.35 Threshold of uplink CV_BEP for increasing power in GPRS ...............2-1968
2.39.36 Threshold of downlink quality for increasing power in GPRS...............2-1969
2.39.37 Threshold of uplink MEAN_BEP for decreasing power in GPRS .........2-1970
2.39.38 Threshold of uplink CV_BEP for decreasing power in GPRS ..............2-1971
2.39.39 Threshold of downlink quality for decreasing power in GPRS .............2-1973
2.39.40 Threshold of uplink MEAN_BEP for increasing power in EDGE ..........2-1974
2.39.41 Threshold of uplink CV_BEP for increasing power in EDGE ...............2-1975
2.39.42 Threshold of downlink MEAN_BEP for increasing power in EDGE ......2-1976
2.39.43 Threshold of downlink CV_BEP for increasing power in EDGE ...........2-1978
2.39.44 Threshold of uplink MEAN_BEP for decreasing power in EDGE .........2-1979
2.39.45 Threshold of uplink CV_BEP for decreasing power in EDGE ..............2-1980
2.39.46 Threshold of downlink MEAN_BEP for decreasing power in EDGE ......2-1981
XLVI
SJ-20140527134815-013|2015-03-10(R1.1)
2.39.47 Threshold of downlink CV_BEP for decreasing power in EDGE ..........2-1983

2.39.48 N of uplink signal for increasing power ..............................................2-1984
2.39.49 N of downlink signal for increasing power ..........................................2-1985
2.39.50 N of uplink signal for decreasing power .............................................2-1986
2.39.51 N of downlink signal for decreasing power.........................................2-1987
2.39.52 N of uplink quality for increasing power in GPRS ...............................2-1989
2.39.53 N of downlink quality for increasing power in GPRS ...........................2-1990
2.39.54 N of uplink quality for decreasing power in GPRS ..............................2-1991
2.39.55 N of downlink quality for decreasing power in GPRS ..........................2-1992
2.39.56 N of uplink quality for increasing power in EDGE ...............................2-1993
2.39.57 N of downlink quality for increasing power in EDGE ...........................2-1994
2.39.58 N of uplink quality for decreasing power in EDGE ..............................2-1996
2.39.59 N of downlink quality for decreasing power in EDGE ..........................2-1997
2.39.60 P of uplink signal for increasing power ..............................................2-1998
2.39.61 P of downlink signal for increasing power ..........................................2-1999
2.39.62 P of uplink signal for decreasing power .............................................2-2000
2.39.63 P of downlink signal for decreasing power .........................................2-2002
2.39.64 P of uplink quality for increasing power in GPRS ...............................2-2003
2.39.65 P of downlink quality for increasing power in GPRS ...........................2-2004
2.39.66 P of uplink quality for decreasing power in GPRS ..............................2-2005
2.39.67 P of downlink quality for decreasing power in GPRS ..........................2-2006
2.39.68 P of uplink quality for increasing power in EDGE ...............................2-2007
2.39.69 P of downlink quality for increasing power in EDGE ...........................2-2009
2.39.70 P of uplink quality for decreasing power in EDGE ..............................2-2010
2.39.71 P of downlink quality for decreasing power in EDGE .......................... 2-2011
2.39.72 Step of uplink power increase...........................................................2-2012
2.39.73 Step of uplink power decrease..........................................................2-2013
2.39.74 Step of downlink power increase ......................................................2-2014
2.39.75 Step of downlink power decrease .....................................................2-2016
2.39.76 Mode of downlink closed loop power control......................................2-2017
2.39.77 lowest CS of enabling downlink power control in GPRS .....................2-2018
2.39.78 lowest MCS of enabling downlink power control in EDGE...................2-2019
2.39.79 try to decrease downlink power ........................................................2-2021
2.39.80 reduced power of dummy usf in good uplink radio condition ...............2-2022
2.39.81 reduced power of dummy usf in general uplink radio condition............2-2024
2.39.82 reduced power of dummy usf in bad uplink radio condition .................2-2025
2.40 EDGE Configuration(GCellEdge)..................................................................2-2027
XLVII
SJ-20140527134815-013|2015-03-10(R1.1)
2.40.1 EDGE Configuration ID......................................................................2-2027

2.40.2 EGPRS packet channel request access program support.....................2-2028
2.40.3 Uplink LA+IR quality control support ...................................................2-2029
2.40.4 Take Preemptive transmit bit function..................................................2-2031
2.40.5 Average filter period for uplink BEP ....................................................2-2032
2.40.6 Average filter period for downlink BEP ................................................2-2033
2.40.7 EGPRS phone quality measure mode.................................................2-2035
2.40.8 EGPRS uplink init. Coding scheme ....................................................2-2036
2.40.9 EGPRS downlink init. Coding scheme ................................................2-2038
2.40.10 EGPRS uplink max. coding scheme .................................................2-2039
2.40.11 EGPRS downlink max. coding scheme .............................................2-2040
2.40.12 edge Initial access rate ....................................................................2-2041
2.40.13 EGPRS phones init. Code can be changed .......................................2-2043
2.40.14 Bep_Period2 of uplink......................................................................2-2044
2.40.15 Bep_Period2 of downlink..................................................................2-2045
2.40.16 Interval number of downlink EGPRS TBF's RRBP .............................2-2046
2.40.17 Interval number of uplink EGPRS TBF's ACK ....................................2-2047
2.40.18 Initial EGPRS code schem at one phase access................................2-2049
2.40.19 EGPRS prior to GPRS Support ........................................................2-2050
2.40.20 EGPRS Uplink Init. Coding Scheme in subcell2.................................2-2051
2.40.21 EGPRS Downlink Init. Coding Scheme in subcell2 ............................2-2052
2.40.22 EGPRS Uplink Max. Coding Scheme in subcell2...............................2-2054
2.40.23 EGPRS Downlink Max. Coding Scheme in subcell2...........................2-2055
2.40.24 Schedule block by quality.................................................................2-2056
2.40.25 Optimizing of sending downlink small data ........................................2-2057
2.40.26 MAX resending times for pending block ............................................2-2059
2.40.27 Immediate Assignment on any CCCH and paging subchannel............2-2060
2.40.28 MS radio access capability required for EGPRS TBF one-phase
access ..............................................................................................2-2061
2.40.29 Resource reallocation for uplink........................................................2-2062
2.41 Enhanced EDGE Configuration(GEhancedEdge) ..........................................2-2063
2.41.1 Enhanced EDGE Configuration ID ......................................................2-2063
2.41.2 EGPRS2-A uplink initial coding scheme ..............................................2-2065
2.41.3 EGPRS2-A downlink initial coding scheme..........................................2-2066
2.41.4 EGPRS2-A uplink maximum coding scheme .......................................2-2067
2.41.5 EGPRS2-A downlink maximum coding scheme...................................2-2069
2.41.6 FANR TBF support ............................................................................2-2070
2.41.7 DLDC support ...................................................................................2-2071
XLVIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.41.8 RTTI support .....................................................................................2-2072

2.41.9 Enable event-based FANR in downlink TBF ........................................2-2074
2.41.10 Enable reduced latency access ........................................................2-2075
2.41.11 Encoding mode of PAN in uplink TBF ................................................2-2076
2.42 Serving Cell CRRM Configuration(GCrrmCellLd) ...........................................2-2077
2.42.1 Serving Cell CRRM Configuration ID ..................................................2-2077
2.42.2 Uplink Load Low Threshold ................................................................2-2078
2.42.3 Uplink Load Medium Threshold ..........................................................2-2079
2.42.4 Uplink Load High Threshold ...............................................................2-2080
2.42.5 Downlink Load Low Threshold............................................................2-2081
2.42.8 Real Time Uplink Load Low Threshold ................................................2-2085
2.42.10 Real Time Uplink Load High Threshold .............................................2-2087
2.42.11 Real Time Downlink Load Low Threshold ..........................................2-2088
2.42.12 Real Time Downlink Load Medium Threshold ....................................2-2089
2.42.13 Real Time Downlink Load High Threshold .........................................2-2090
2.42.14 Not Real Time Uplink Load Low Threshold ........................................2-2091
2.42.15 Not Real Time Uplink Load Medium Threshold ..................................2-2092
2.42.16 Not Real Time Uplink Load High Threshold .......................................2-2093
2.42.17 Not Real Time Downlink Load Low Threshold....................................2-2095
2.42.18 Not Real Time Downlink Load Medium Threshold ..............................2-2096
2.42.19 Not Real Time Downlink Load High Threshold ...................................2-2097
2.43 SubCell(GSubCell) ......................................................................................2-2098
2.43.1 SubCell ID ........................................................................................2-2098
2.43.2 SubCell Sequence.............................................................................2-2099
2.43.3 Frequency Band of SubCell................................................................2-2100
2.43.4 Frequency Pool DN ...........................................................................2-2101
2.44 Subcell Handover Control(GScHandoverControl) ..........................................2-2102
2.44.1 COBCCH Handover Control ID...........................................................2-2102
2.44.2 PBGT handover start threshold of subcell2 .........................................2-2104
2.44.3 FR to AMRHR handover load threshold of subcell2 .............................2-2105
2.44.4 The load of HO from FR to HR(V1) in subcell2 ....................................2-2106
2.44.5 SubCell handover algorithm(High Speed)............................................2-2108
2.44.6 SubCell handover algorithm(Middle Speed).........................................2-2109
2.44.7 SubCell handover algorithm(Low Speed) ............................................ 2-2110
XLIX
SJ-20140527134815-013|2015-03-10(R1.1)
2.44.8 The MAX of path loss ........................................................................ 2-2111

2.44.9 The MIN of path loss.......................................................................... 2-2113
2.44.10 The MAX of time advance ................................................................ 2-2114
2.44.11 The MIN of time advance ................................................................. 2-2115
2.44.12 Inter Site handover to SubCell2 permitted ......................................... 2-2116
2.44.13 Measure BCCH when in subcell2...................................................... 2-2117
2.44.14 Good C/I ......................................................................................... 2-2118
2.44.15 Good value P ..................................................................................2-2120
2.44.16 Good value N ..................................................................................2-2121
2.44.17 Bad C/I ...........................................................................................2-2123
2.44.18 Bad value P ....................................................................................2-2124
2.44.19 Bad value N ....................................................................................2-2125
2.44.20 Handover Parameter N of SubCell1 ..................................................2-2127
2.44.21 Handover Parameter P of SubCell1 ..................................................2-2128
2.44.22 Handover Parameter N of SubCell2 ..................................................2-2129
2.44.23 Handover Parameter P of SubCell2 ..................................................2-2130
2.44.24 SubCell2 To SubCell1 Handover Threshold .......................................2-2131
2.44.25 The load of HO from HR(V1) to FR for Subcell2.................................2-2133
2.44.26 The load of HO from HR(V3) to FR for Subcell2.................................2-2135
2.44.27 Use Load Balance ...........................................................................2-2136
2.44.28 Traffic High Load Threshold of SubCell1 ...........................................2-2137
2.44.29 Traffic Threshold of Handover out SubCell1 ......................................2-2139
2.44.30 Traffic Threshold of Handover in SubCell1.........................................2-2140
2.44.31 Traffic High Load Threshold of SubCell2 ...........................................2-2141
2.44.32 Traffic Threshold of Handover out SubCell2 ......................................2-2143
2.44.33 Traffic Threshold of Handover in SubCell2.........................................2-2144
2.44.34 The MAX of path loss for assignment................................................2-2145
2.44.35 The MIN of path loss for assignment .................................................2-2147
2.44.36 The MAX of time advance for assignment .........................................2-2148
2.44.37 The MIN of time advance for assignment ..........................................2-2149
2.44.38 Good C/I for assignment ..................................................................2-2150
2.44.39 Bad C/I for assignment.....................................................................2-2151
2.44.40 Penalty time for inter-subcell handover failure....................................2-2152
2.45 SubCell PS Channel Allocation Configuration(GSubCellPsAlloc) ....................2-2153
2.45.1 SubCell PS Channel Allocation Configuration ID .................................2-2153
2.45.2 SubCell selection of PS channel allocation..........................................2-2154
2.45.3 RXLEV threshold in SubCell 1............................................................2-2156
L
SJ-20140527134815-013|2015-03-10(R1.1)
2.45.4 RXLEV threshold in SubCell 2............................................................2-2157

2.45.5 RxLev P Value ..................................................................................2-2159
2.45.6 RxLev N Value ..................................................................................2-2160
2.45.7 TA threshold for PS channel allocate in SubCell1 ................................2-2161
2.45.8 TA threshold for PS channel allocate in SubCell2 ................................2-2162
2.45.9 TA P Value ........................................................................................2-2163
2.45.10 TA N Value ......................................................................................2-2164
2.45.11 SubCell1 PS Busy Threshold............................................................2-2165
2.45.12 SubCell2 PS Busy Threshold ...........................................................2-2167
2.45.13 Band priority based Initial access in CoBcch cell ...............................2-2168
2.45.14 SubCell 1 high load threshold ...........................................................2-2169
2.45.15 SubCell 2 high load threshold ...........................................................2-2170
2.45.16 SubCell 1 handover in threshold .......................................................2-2171
2.45.17 SubCell 2 handover in threshold .......................................................2-2173
2.45.18 Load balance indication in CoBcch Cell.............................................2-2174
2.45.19 Initial access to subcell 2 RxLev threshold.........................................2-2175
2.45.20 Initial access to subcell 2 TA threshold ..............................................2-2178
2.45.21 TRX idle percent threshold in subcell 2 .............................................2-2179
2.45.22 TrxPSBusyThs by subcell.................................................................2-2180
2.46 Power Control(GPowerControl) ....................................................................2-2182
2.46.1 Power Control ID ...............................................................................2-2182
2.46.2 GSubCell DN ....................................................................................2-2183
2.46.3 Uplink level Sample count ..................................................................2-2184
2.46.4 Uplink level Weight ............................................................................2-2185
2.46.5 Downlink level Sample count..............................................................2-2187
2.46.6 Downlink level Weight........................................................................2-2188
2.46.7 Uplink quality Sample count ...............................................................2-2190
2.46.8 Uplink quality Weight .........................................................................2-2191
2.46.9 Downlink quality Sample count ...........................................................2-2192
2.46.10 Downlink quality Weight ...................................................................2-2194
2.46.11 Uplink power control allowed ............................................................2-2195
2.46.12 Downlink power control allowed........................................................2-2196
2.46.13 Increase step of uplink power control ................................................2-2198
2.46.14 Decrease step of uplink power control...............................................2-2199
2.46.15 Increase uplink level Threshold ........................................................2-2200
2.46.16 Decrease uplink level Threshold .......................................................2-2201
2.46.17 Increase uplink quality Threshold......................................................2-2203
LI
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.18 Decrease uplink quality Threshold ....................................................2-2204

2.46.19 Increase downlink level Threshold ....................................................2-2206
2.46.20 Decrease downlink level Threshold...................................................2-2207
2.46.21 Increase downlink quality Threshold .................................................2-2208
2.46.22 Decrease downlink quality Threshold ................................................2-2210
2.46.23 Increase uplink level Value P ............................................................ 2-2211
2.46.24 Increase uplink level Value N............................................................2-2212
2.46.25 Increase downlink level Value P........................................................2-2214
2.46.26 Increase downlink level Value N .......................................................2-2215
2.46.27 Decrease uplink level Value P ..........................................................2-2216
2.46.28 Decrease uplink level Value N ..........................................................2-2218
2.46.29 Decrease downlink level Value P ......................................................2-2219
2.46.30 Decrease downlink level Value N ......................................................2-2220
2.46.31 Increase uplink quality Value P .........................................................2-2221
2.46.32 Increase uplink quality Value N .........................................................2-2223
2.46.33 Increase downlink quality Value P.....................................................2-2224
2.46.34 Increase downlink quality Value N.....................................................2-2225
2.46.35 Decrease uplink quality Value P........................................................2-2227
2.46.36 Decrease uplink quality Value N .......................................................2-2228
2.46.37 Decrease downlink quality Value P ...................................................2-2229
2.46.38 Decrease downlink quality Value N ...................................................2-2231
2.46.39 MAX power level of MS....................................................................2-2232
2.46.40 MIN power level of MS .....................................................................2-2233
2.46.41 MIN power level of BS .....................................................................2-2235
2.46.42 Uplink rapid power control ................................................................2-2236
2.46.43 Downlink rapid power control............................................................2-2237
2.46.44 MIN interval of power control ............................................................2-2239
2.46.45 Power control PwrDecrLimit .............................................................2-2240
2.46.46 Report period of measurement for power control ...............................2-2241
2.46.47 BCCH power control downlink ..........................................................2-2242
2.46.48 BCCH maxim power decrease..........................................................2-2244
2.46.49 BCCH idle burst power.....................................................................2-2245
2.46.50 Uplink exponential filter ....................................................................2-2248
2.46.51 Downlink exponential filter................................................................2-2249
2.46.52 Uplink level optimize ........................................................................2-2250
2.46.53 Downlink level optimize....................................................................2-2251
2.46.54 Minimize Interval of downlink power control .......................................2-2252
LII
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.55 Increase step of downlink power control ............................................2-2254

2.46.56 Decrease step of downlink power control ..........................................2-2255
2.46.57 Urgent Rescue Switch .....................................................................2-2256
2.46.58 Uplink Initial State Effectively Switch .................................................2-2257
2.46.59 Initial State MR Number ...................................................................2-2258
2.46.60 High Level High Quality Effectively Switch ........................................2-2260
2.46.61 Uplink Exponential Filter Cycle .........................................................2-2261
2.46.62 Downlink Exponential Filter Cycle .....................................................2-2262
2.46.63 Uplink Window Filter Weight Sequence ............................................2-2263
2.46.64 Downlink Window Filter Weight Sequence ........................................2-2264
2.46.65 Uplink Level Urgent Rescue Threshold .............................................2-2265
2.46.66 Downlink Level Urgent Rescue Threshold .........................................2-2267
2.46.67 Uplink Quality Urgent Rescue Threshold ...........................................2-2268
2.46.68 Downlink Quality Urgent Rescue Threshold.......................................2-2269
2.46.69 N of Urgent Rescue .........................................................................2-2271
2.46.70 P of Urgent Rescue .........................................................................2-2272
2.46.71 Uplink Power Reduce Level Margin ..................................................2-2273
2.46.72 Downlink Power Reduce Level Margin ..............................................2-2274
2.46.73 Initial State Power Decrease Limit ....................................................2-2276
2.46.74 Uplink Power Decrease Limit of Quality rank ....................................2-2277
2.46.75 Downlink Power Decrease Limit of Quality rank ................................2-2278
2.46.76 Uplink Power decrease Maximum Step of Quality 0 ...........................2-2280
2.46.77 Downlink Power decrease Maximum Step of Quality 0 .......................2-2281
2.46.78 Uplink Power decrease Maximum Step of Quality 1 and 2 ..................2-2282
2.46.79 Downlink Power decrease Maximum Step of Quality 1 and 2..............2-2283
2.46.80 Uplink Power decrease Maximum Step of other Quality .....................2-2284
2.46.81 Downlink Power decrease Maximum Step of other Quality .................2-2286
2.46.82 Downlink New Exponential Filter Function .........................................2-2287
2.46.83 Downlink New Exponential Filter Interval...........................................2-2288
2.46.84 Downlink New Exponential Filter Level Target....................................2-2289
2.46.85 Downlink New Exponential Filter RQ Target.......................................2-2292
2.46.86 Downlink New Exponential Filter Level Weight ..................................2-2293
2.46.87 Downlink New Exponential Filter RQ Weight .....................................2-2294
2.46.88 Downlink New Exponential Filter Level Length...................................2-2295
2.46.89 Downlink New Exponential Filter RQ Length......................................2-2296
2.46.90 Downlink New Exponential Filter Increase\Decrease Ratio .................2-2297
2.46.91 Uplink New Exponential Filter Function .............................................2-2299
LIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.92 Uplink New Exponential Filter Interval ...............................................2-2300

2.46.93 Uplink New Exponential Filter Level Target........................................2-2301
2.46.94 Uplink New Exponential Filter RQ Target...........................................2-2304
2.46.95 Uplink New Exponential Filter Level Weight.......................................2-2305
2.46.96 Uplink New Exponential Filter RQ Weight..........................................2-2306
2.46.97 Uplink New Exponential Filter Level Length .......................................2-2307
2.46.98 Uplink New Exponential Filter RQ Length ..........................................2-2308
2.46.99 Uplink New Exponential Filter Increase\Decrease Ratio .....................2-2309
2.46.100 Power control new filter para1 ........................................................2-2310
2.46.101 Power control new filter para2 ........................................................ 2-2311
2.46.102 Downlink power control rescue .......................................................2-2312
2.46.103 Downlink rescue level threshold......................................................2-2314
2.46.104 Downlink rescue quality threshold ...................................................2-2316
2.46.105 Downlink good level bad quality .....................................................2-2317
2.46.106 Uplink good level bad quality .........................................................2-2319
2.46.107 The different increase downlink level threshold of SAIC MS and
NON-SAIC MS...................................................................................2-2320
2.46.108 The different decrease downlink level threshold of SAIC MS and
NON-SAIC MS...................................................................................2-2321
2.47 PS Handover Control(GPsHandoverControl) .................................................2-2322
2.47.1 PS Handover Control ID.....................................................................2-2322
2.47.2 PS handover support .........................................................................2-2323
2.47.3 ACK of PS handover command ..........................................................2-2325
2.47.4 Blind transmission support .................................................................2-2326
2.47.5 Optimized handover support ..............................................................2-2327
2.47.6 Send handover access in synchronized handover ...............................2-2328
2.47.7 Send handover access in pre-synchronized handover..........................2-2329
2.47.8 Reset RLC ........................................................................................2-2331
2.47.9 Trigger PS handover by PCCN...........................................................2-2332
2.47.11 Uplink power level Sample count ......................................................2-2334
2.47.12 Downlink power level Sample count..................................................2-2336
2.47.13 Uplink quality Sample count .............................................................2-2337
2.47.14 Downlink quality Sample count .........................................................2-2338
2.47.15 Distance .........................................................................................2-2339
2.47.16 Neighboring cell...............................................................................2-2341
LIV
SJ-20140527134815-013|2015-03-10(R1.1)

2.47.29 Uplink receive level of intra-ho Threshold ..........................................2-2359
2.47.30 Uplink receive level of intra-ho Value P .............................................2-2360
2.47.31 Uplink receive level of intra-ho Value N .............................................2-2362
2.47.32 Downlink receive level of intra-ho Threshold......................................2-2363
2.47.33 Downlink receive level of intra-ho Value P .........................................2-2365
2.47.34 Downlink receive level of intra-ho Value N .........................................2-2366
2.47.35 Rapid handover Threshold ...............................................................2-2367
2.47.36 Rapid handover Value N ..................................................................2-2369
2.47.37 Macro to micro handover Threshold..................................................2-2370
2.47.38 Macro to micro handover Value N .....................................................2-2371
2.47.44 MIN interval between inter-cell handover...........................................2-2379
2.47.45 Prior layer selecting parameter on signal level/quality ........................2-2380
2.47.46 Handover to same layer other band neighbour cell for PBGT
permitted ...........................................................................................2-2381
2.47.47 Handover to neighbour cell with no Layer Relation for PBGT
permitted ...........................................................................................2-2383
2.47.48 Handover to upper layer neighbour cell for PBGT permitted ...............2-2384
2.47.49 Handover to under layer neighbor cell for PBGT permitted .................2-2385
2.47.50 Synchronism ..................................................................................2-2386
2.47.51 Asynchronism .................................................................................2-2387
2.47.52 Pseudo-synchronism (HoPatternInd_2).............................................2-2388
2.47.53 Pre-synchronism (HoPatternInd_3) ...................................................2-2389
2.47.54 Allow intra-Cell handover attempt due to uplink interference ...............2-2391
LV
SJ-20140527134815-013|2015-03-10(R1.1)
2.47.55 Allow intra-Cell handover attempt due to downlink interference...........2-2392

2.47.56 Allow standard PBGT handover........................................................2-2393
2.47.57 Allow handover due to distance ........................................................2-2394
2.47.58 Allow automatic handover based on traffic.........................................2-2395
2.47.59 Enable rapid handover .....................................................................2-2396
2.47.60 Enable macro to micro handover ......................................................2-2398
2.47.61 Enable queue in handover ...............................................................2-2399
2.47.62 Enable queue in handover preemption in handover............................2-2400
2.47.63 Penalty time for handover failure ......................................................2-2401
2.47.64 Layer control value for handover on traffic .........................................2-2402
2.47.65 Frequency control value for handover on traffic..................................2-2404
2.47.66 Threshold of traffic for handover .......................................................2-2405
2.47.67 Traffic handover threshold ................................................................2-2406
2.47.68 Level offset during penalty................................................................2-2407
2.47.69 Uplink interference quality offset .......................................................2-2408
2.47.70 Uplink interference level offset..........................................................2-2410
2.47.71 Downlink interference quality offset................................................... 2-2411
2.47.72 Downlink interference level offset......................................................2-2413
2.47.73 Invalid intra-handover time ...............................................................2-2414
2.47.74 MAX count of invalid intra-handover..................................................2-2416
2.48 Trx(GTrx) ....................................................................................................2-2417
2.48.1 TRX ID .............................................................................................2-2417
2.48.2 TRX Sequence..................................................................................2-2418
2.48.3 GBtsPanel DN...................................................................................2-2419
2.48.4 GSubCell DN ....................................................................................2-2420
2.48.5 TRX type ..........................................................................................2-2421
2.48.6 Static power level ..............................................................................2-2423
2.48.7 BCCH Mark ......................................................................................2-2424
2.48.8 Assign Priority of the Trx ....................................................................2-2425
2.48.9 Power level .......................................................................................2-2427
2.48.10 Pair Trx ...........................................................................................2-2428
2.48.11 RTTI preference ..............................................................................2-2429
2.48.12 TSC................................................................................................2-2430
2.48.13 TSC2 ..............................................................................................2-2431
2.48.14 Dynamic Trx....................................................................................2-2432
2.48.15 ARFCN ...........................................................................................2-2434
2.48.16 GHoppingFrequency DN ..................................................................2-2435
LVI
SJ-20140527134815-013|2015-03-10(R1.1)
2.48.17 GHoppingBaseband DN...................................................................2-2436

2.48.18 Combiner Loss ................................................................................2-2437
2.48.19 HoppingFrequency MAIO.................................................................2-2438
2.48.20 Support TS freq-hopping ..................................................................2-2439
2.48.21 IFTA TRX ........................................................................................2-2441
2.48.22 Use When IFTA Not Online ..............................................................2-2442
2.49 Ts(GTs).......................................................................................................2-2443
2.49.1 Ts ID.................................................................................................2-2443
2.49.2 TS Sequence ....................................................................................2-2444
2.49.3 TS Channel Combination ...................................................................2-2445
2.49.4 MAIO................................................................................................2-2448
2.49.5 Dynamic TS ......................................................................................2-2449
2.49.6 Ps Service Preference Property..........................................................2-2450
2.49.7 Pair No. ............................................................................................2-2452
2.49.8 USF Mode Used In RTTI....................................................................2-2453
2.49.9 PDCH Precedence ............................................................................2-2454
2.49.10 GHoppingFrequency DN ..................................................................2-2456
2.49.11 Is Reserved .....................................................................................2-2457
2.50 Adjacent GSM Cell Configuration(GGsmRelation) .........................................2-2458
2.50.1 Relation type.....................................................................................2-2458
2.50.2 DN of source Gsmcell ........................................................................2-2459
2.50.3 DN of source ExternalGsmcell............................................................2-2461
2.50.4 Relation Sequence ............................................................................2-2462
2.50.5 Priority of handover ...........................................................................2-2463
2.50.6 MIN power level for handover access .................................................2-2464
2.50.7 MIN threshold of signal level for handover on PBGT ............................2-2467
2.50.8 MIN threshold of signal level for handover on power level ....................2-2469
2.50.9 MIN threshold of signal level for handover on quality............................2-2470
2.50.10 Is related cell...................................................................................2-2472
2.50.11 Neighboring cell layer.......................................................................2-2473
2.50.12 Is handover forced neighbor cell .......................................................2-2475
2.50.13 MAX level difference of force handover .............................................2-2476
2.50.14 Handover force resource threshold ...................................................2-2477
2.50.15 Macro to micro handover Threshold..................................................2-2479
2.50.16 Macro to micro handover Value N .....................................................2-2481
2.50.17 Target cell traffic threshold................................................................2-2483
2.50.18 CS adjacent cell report priority..........................................................2-2484
LVII
SJ-20140527134815-013|2015-03-10(R1.1)
2.50.19 PS adjacent cell report priority ..........................................................2-2486

2.50.20 The direction of neighbour cell for downlink rapid handover ................2-2488
2.50.21 Minimum RX level(PS) .....................................................................2-2489
2.50.22 Margin of PBGT handover(PS) .........................................................2-2491
2.50.23 Margin of RX handover(PS) .............................................................2-2493
2.50.24 Margin of quality handover(PS) ........................................................2-2494
2.50.25 Is related cell(PS) ............................................................................2-2495
2.50.26 Handover priority(PS) ......................................................................2-2496
2.50.27 Max TX power of MS(PS).................................................................2-2498
2.50.28 Traffic threshold of target cell(PS) .....................................................2-2499
2.50.29 Threshold of macro to micro handover(PS) .......................................2-2500
2.50.30 Counter of macro to micro handover(PS) ..........................................2-2502
2.50.31 The number of C/I limited cell ...........................................................2-2504
2.50.32 The objectID list of C/I limited cell .....................................................2-2505
2.50.33 The threshold list of C/I limited cell....................................................2-2506
2.50.34 Downlink rapid handover threshold ...................................................2-2507
2.50.35 Downlink rapid handover N ..............................................................2-2509
2.50.36 exclusive cell for high speed ............................................................2-2510
2.50.37 CCN support ................................................................................... 2-2511
2.50.38 Is the directed retry ncell ..................................................................2-2513
2.50.39 PBGT handover margin of subcell2...................................................2-2514
2.50.40 Rx level handover margin of subcell2................................................2-2515
2.50.41 Rx quality handover margin of subcell2 .............................................2-2517
2.50.42 Min Rx level of Neighbour Cell for subcell2........................................2-2518
2.50.43 Target cell traffic threshold of Subcell2 ..............................................2-2521
2.50.44 Handover Priority Indication when serve cell shuttingdown .................2-2523
2.50.45 Is The Related Cell In dual- Frequency Network ................................2-2524
2.50.46 Downlink rapid handover threshold for SDCCH..................................2-2525
2.50.47 Downlink rapid handover N for SDCCH.............................................2-2528
2.50.48 Forbid Period For non-Emergency Handover.....................................2-2529
2.50.49 Penalty Period For non-Emergency Handover ...................................2-2531
2.50.50 Penalty Level For non-Emergency Handover.....................................2-2532
2.50.51 Forbid Period For Emergency Handover ...........................................2-2536
2.50.52 Penalty Period For Emergency Handover..........................................2-2537
2.50.53 Penalty Level For Emergency Handover ...........................................2-2539
2.50.54 avoid Ping-Pang cell reselection Timer..............................................2-2542
2.50.55 NC2 Reselection hysteresis Threshold..............................................2-2543
LVIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.50.56 NC2 reselection DL RxLevel Threshold.............................................2-2544

2.50.57 NC2 PBGT margin...........................................................................2-2546
2.50.58 NC2 RxLev margin ..........................................................................2-2547
2.50.59 NC2 RxQual margin.........................................................................2-2548
2.50.60 NC2 neighbour cell RXLEV_ACCESS_MIN.......................................2-2549
2.50.61 NC2 neighbour cell MS_TXPWR_MAX .............................................2-2552
2.50.62 target cell traffic threshold ................................................................2-2553
2.50.63 Cell reselection priority.....................................................................2-2554
2.50.64 Good level and bad quality handover NCell MARGIN.........................2-2555
2.50.65 Is mutual adjacent cell .....................................................................2-2556
2.51 Interfere Gsm Cell Configuration(GGsmIntfRelation)......................................2-2557
2.51.1 Interfere Gsm Cell Configuration ID ....................................................2-2557
2.51.2 GsmIntfRelation Sequence ................................................................2-2558
2.51.3 GGsmCell DN ...................................................................................2-2560
2.51.4 GExternalGsmCell DN .......................................................................2-2561
2.51.5 Exchange IFTA information with this interfere cell ................................2-2562
2.51.6 Default Rx level of this interfere cell ....................................................2-2563
2.51.7 Default Rx level from this interfere cell ................................................2-2566
2.51.8 Low Level of Neighbour Cell...............................................................2-2568
2.51.9 Is mutual adjacent cell .......................................................................2-2571
2.52 Visit Paging Cell(GGsmVpcRelation) ............................................................2-2572
2.52.1 Visit Paging Cell ID............................................................................2-2572
2.52.2 VPC Id..............................................................................................2-2573
2.52.3 DN of GGsmCell ...............................................................................2-2574
2.53 Adjacent UTRAN Cell Configuration(GUtranRelation) ....................................2-2576
2.53.1 UTRAN Relation type ........................................................................2-2576
2.53.2 DN of UTRAN FDD source cell...........................................................2-2577
2.53.3 DN of UTRAN TDD source cell...........................................................2-2578
2.53.4 UTRAN Relation Sequence................................................................2-2579
2.53.5 RSCP offset handover to UTRAN adjacent cell....................................2-2580
2.53.6 Ec/No offset handover to UTRAN adjacent cell....................................2-2582
2.53.7 CS adjacent cell report priority............................................................2-2583
2.53.8 PS adjacent cell report priority............................................................2-2585
2.53.9 Target cell traffic threshold .................................................................2-2587
2.53.10 RSCP offset ....................................................................................2-2588
2.53.11 EcNo offset .....................................................................................2-2589
2.53.12 Target cell traffic threshold(PS) .........................................................2-2591
LIX
SJ-20140527134815-013|2015-03-10(R1.1)
2.53.13 CCN support ...................................................................................2-2592

2.53.14 the priority of Utran Cell ...................................................................2-2593
2.53.15 Is the directed retry ncell ..................................................................2-2595
2.54 Adjacent E-UTRAN Cell Configuration(GEutranRelation) ...............................2-2596
2.54.1 Adjacent E-UTRAN Cell Configuration ID ............................................2-2596
2.54.2 DN of E-UTRAN FDD source cell .......................................................2-2597
2.54.3 DN of E-UTRAN TDD source cell .......................................................2-2598
2.54.4 E-UTRAN Relation Sequence ............................................................2-2599
2.54.5 the PRIORITY of E-UTRAN cells for the specified EARFCN.................2-2601
2.54.6 CCN support .....................................................................................2-2602
2.54.7 The re-selecting forbid flag of LTE Ncell ..............................................2-2604
2.54.8 the PRIORITY of E-UTRAN cells ........................................................2-2605
2.54.9 the PRIORITY of E-UTRAN cells for FastReturn to LTE .......................2-2606
2.54.10 This neighbour cell is Only for FastReturn .........................................2-2607
2.55 User and Service Resource Schedule(GUserAndSrvBasedSche) ...................2-2609
2.55.1 User and Service Based Resource Schedule ID ..................................2-2609
2.55.2 Support resource optimizing by service ...............................................2-2610
2.55.3 Threshold of PS resource congestion ................................................. 2-2611
2.55.4 Threshold of relieving PS resource congestion ....................................2-2612
2.55.5 Traffic control based on service priority ...............................................2-2613
2.55.6 Allowed TimeSlot Number ..................................................................2-2615
2.56 User Priority and Service Type Configuration(GPsUserAndSrvType)...............2-2616
2.56.1 User Priority and Service Type Configuration ID ..................................2-2616
2.56.2 User Type .........................................................................................2-2617
2.56.3 Service Type .....................................................................................2-2618
2.56.4 Schedule Priority ...............................................................................2-2619
2.56.5 Downlink delay time...........................................................................2-2620
2.56.6 TBF occupancy .................................................................................2-2622
2.56.7 Max PDTCH num .............................................................................2-2623
2.56.8 Preempt priority ................................................................................2-2624
2.56.9 TimeSlot off based on service and subscriber......................................2-2625
2.56.10 Force release based on service and subscriber .................................2-2626
2.57 Cell Reserved Configuration(GCellRsv) ........................................................2-2628
2.57.1 Cell Reserved Configuration ID ..........................................................2-2628
2.57.2 Cell Reserved Parameter 1 ................................................................2-2629
LX
SJ-20140527134815-013|2015-03-10(R1.1)

2.57.10 Cell Reserved Parameter 9 ..............................................................2-2637
2.57.11 Cell Reserved Parameter 10.............................................................2-2638
2.57.13 Cell Reserved Parameter 12 ............................................................2-2640
2.58 Priority-based Resel Configuration(GPriorityResel)........................................2-2650
2.58.1 Priority-based Resel Configuration ID .................................................2-2650
2.58.2 Cell re-selection Switch Based on priority............................................2-2651
2.58.3 Priority of GSM cells ..........................................................................2-2652
2.58.4 threshold of serving cell that used by priority Cell re-selection
algorithm ...........................................................................................2-2653
2.58.5 threshold that Allow MS re-select to lower priority Cell .........................2-2655
2.58.6 Hysteresis of priority reselection algorithm ..........................................2-2657
2.58.7 Time hysteresis of priority reselection algorithm...................................2-2658
2.58.8 the default priority of Utran Cells.........................................................2-2659
2.58.9 the maximum thresholds of Utran reselection ......................................2-2660
2.58.10 the minimum thresholds of Utran reselection .....................................2-2662
2.58.11 Minimum RX level for Utran cells ......................................................2-2663
2.58.12 the default priority of EUtran Cells.....................................................2-2664
2.58.13 the maximum thresholds of EUtran reselection ..................................2-2665
2.58.14 the minimum thresholds of EUtran reselection ...................................2-2667
2.58.15 Minimum RX level for EUtran cells ....................................................2-2668
2.58.16 High RSRQ thresholds for EUtran reselection....................................2-2669
2.58.17 Low RSRQ thresholds for EUtran reselection ....................................2-2670
2.58.18 Minimum RSRQ for EUtran cells.......................................................2-2672
2.58.19 Minimum RSRQ for EUtran cells based on RSRP..............................2-2673
LXI
SJ-20140527134815-013|2015-03-10(R1.1)
2.58.20 Minimum RSRP RX level for EUtran cells..........................................2-2675

2.58.21 Enhanced Cell Reselection Parameters Indication .............................2-2676
2.58.22 the default priority of EUtran Cell in packet transfer mode ..................2-2678
2.58.23 the maximum thresholds of EUtran reselection in packet transfer
mode ................................................................................................2-2679
2.58.24 the minimum thresholds of EUtran reselection in packet transfer
mode ................................................................................................2-2680
2.58.25 Minimum RX level for EUtran cells in packet transfer mode ................2-2681
2.58.26 High RSRQ thresholds for EUtran reselection in packet transfer
mode ................................................................................................2-2682
2.58.27 Low RSRQ thresholds for EUtran reselection in packet transfer
mode ................................................................................................2-2683
2.58.28 Minimum RSRQ for EUtran cells in packet transfer mode ...................2-2684
2.58.29 Minimum RSRQ for EUtran cells based on RSRP in packet transfer
mode ................................................................................................2-2686
2.58.30 Minimum RSRP RX level for EUtran cells in packet transfer mode ......2-2687
2.58.31 the minimum thresholds for FastReturn to LTE ..................................2-2688
2.58.32 Minimum RX level of EUtran cells for FastReturn to LTE ....................2-2689
2.58.33 Low RSRQ thresholds for FastReturn to LTE.....................................2-2691
2.58.34 Minimum RSRQ of EUtran cells for FastReturn to LTE .......................2-2692
2.59 BSC Um Soft Synchronous Configuration(GUmsyn) ......................................2-2693
2.59.1 BSC Um Soft Synchronous Configuration ID .......................................2-2693
2.59.2 Um soft Synchronous Support............................................................2-2695
2.59.3 Soft Synchronous Measure Base AB ..................................................2-2696
2.59.4 Soft Synchronous Measure Base MTD ...............................................2-2697
2.59.5 Soft Synchronous Measure Base AB Start Time(hour) .........................2-2698
2.59.6 Soft Synchronous Measure Base AB Start Time(minute)......................2-2699
2.59.7 Soft Synchronous Measure Base AB Duration.....................................2-2700
2.59.8 Soft Synchronous Clock Adjust Start Time(hour) .................................2-2701
2.59.9 Soft Synchronous Clock Adjust Start Time(minute) ..............................2-2703
2.59.10 Soft Synchronous Clock Adjust Duration(minute) ...............................2-2704
2.59.11 Soft Synchronous Measure Base MTD Start Time(hour).....................2-2705
2.59.12 Soft Synchronous Measure Base MTD Start Time(minute) .................2-2706
2.59.13 Soft Synchronous Measure Base MTD Duration ................................2-2707
2.59.14 Allow Detriment Adjust .....................................................................2-2708
2.59.15 Soft Synchronous Measure Base AB(Sunday)...................................2-2709
2.59.16 Soft Synchronous Measure Base AB(Monday) ..................................2-2710
2.59.17 Soft Synchronous Measure Base AB(Tuesday) .................................2-2712
LXII
SJ-20140527134815-013|2015-03-10(R1.1)
2.59.18 Soft Synchronous Measure Base AB(Wednesday).............................2-2713

2.59.19 Soft Synchronous Measure Base AB(Thursday) ................................2-2714
2.59.20 Soft Synchronous Measure Base AB(Friday).....................................2-2715
2.59.21 Soft Synchronous Measure Base AB(Saturday).................................2-2716
2.59.22 Soft Synchronous Measure Base MTD(Sunday) ................................2-2717
2.59.23 Soft Synchronous Measure Base MTD(Monday) ...............................2-2719
2.59.24 Soft Synchronous Measure Base MTD(Tuesday)...............................2-2720
2.59.25 Soft Synchronous Measure Base MTD(Wednesday)..........................2-2721
2.59.26 Soft Synchronous Measure Base MTD(Thursday) .............................2-2722
2.59.27 Soft Synchronous Measure Base MTD(Friday) ..................................2-2723
2.59.28 Soft Synchronous Measure Base MTD(Saturday) ..............................2-2724
2.59.29 Soft Synchronous Clock Adjust(Sunday) ...........................................2-2725
2.59.30 Soft Synchronous Clock Adjust(Monday)...........................................2-2727
2.59.31 Soft Synchronous Clock Adjust(Tuesday)..........................................2-2728
2.59.32 Soft Synchronous Clock Adjust(Wednesday) .....................................2-2729
2.59.33 Soft Synchronous Clock Adjust(Thursday).........................................2-2730
2.59.34 Soft Synchronous Clock Adjust(Friday) .............................................2-2731
2.59.35 Soft Synchronous Clock Adjust(Saturday) .........................................2-2732
2.59.36 Level Difference Threshold of Ncell and Serving Cell .........................2-2733
2.59.37 Synchronous Measure handover Start Threshold...............................2-2735
2.59.38 Max Number Synchronous Measure TRX Per Site.............................2-2736
2.59.39 InterBSC Soft Synchronous Measure Support ...................................2-2737
2.59.40 Whether to adjust frame number.......................................................2-2738
2.59.41 Cycle adjustment .............................................................................2-2739
2.60 AMR Handover Control(GAmrHandoverControl)............................................2-2740
2.60.1 Amr Handover Control ID ...................................................................2-2740
2.60.2 Uplink receive quality for AMR-FR Threshold ......................................2-2741
2.60.3 Uplink receive quality for AMR-FR Value N..........................................2-2743
2.60.4 Uplink receive quality for AMR-FR Value P..........................................2-2744
2.60.5 Uplink receive quality for AMR-HR Threshold ......................................2-2745
2.60.6 Uplink receive quality for AMR-HR Value N .........................................2-2746
2.60.7 Uplink receive quality for AMR-HR Value P .........................................2-2747
2.60.8 Downlink receive quality for AMR-FR Threshold ..................................2-2748
2.60.9 Downlink receive quality for AMR-FR Value N .....................................2-2749
2.60.10 Downlink receive quality for AMR-FR Value P....................................2-2751
2.60.11 Downlink receive quality for AMR-HR Threshold ................................2-2752
2.60.12 Downlink receive quality for AMR-HR Value N ...................................2-2753
LXIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.60.13 Downlink receive quality for AMR-HR Value P ...................................2-2754

2.60.14 Uplink receive level for AMR-FR Threshold .......................................2-2755
2.60.15 Uplink receive level for AMR-FR Value N ..........................................2-2756
2.60.16 Uplink receive level for AMR-FR Value P...........................................2-2758
2.60.17 Uplink receive level for AMR-HR Threshold .......................................2-2759
2.60.18 Uplink receive level for AMR-HR Value N ..........................................2-2760
2.60.19 Uplink receive level for AMR-HR Value P ..........................................2-2761
2.60.20 Downlink receive level for AMR-FR Threshold ...................................2-2762
2.60.21 Downlink receive level for AMR-FR Value N ......................................2-2763
2.60.22 Downlink receive level for AMR-FR Value P ......................................2-2765
2.60.23 Downlink receive level for AMR-HR Threshold...................................2-2766
2.60.24 Downlink receive level for AMR-HR Value N......................................2-2767
2.60.25 Downlink receive level for AMR-HR Value P ......................................2-2768
2.61 FH Handover Control(GFhHandoverControl) .................................................2-2769
2.61.1 Support handover from HR to FR due to low load ................................2-2769
2.61.2 If support intra-handover from FR to HR due to high load .....................2-2770
2.61.3 If support intra-handover from HR to FR due to bad quality ..................2-2771
2.61.4 The load of HO from FR to HR(V3) .....................................................2-2773
2.61.5 The load of HO from FR to HR(V1) .....................................................2-2774
2.61.6 The uplink quality of FR to HR load HO...............................................2-2776
2.61.7 The downlink quality of FR to HR load HO ..........................................2-2777
2.61.8 The uplink level of FR to HR load HO .................................................2-2778
2.61.9 The downlink level of FR to HR load HO .............................................2-2780
2.61.10 The uplink quality low threshold of HR(V1) to FR quality HO...............2-2781
2.61.11 The uplink quality High threshold of HR(V1) to FR quality HO .............2-2782
2.61.12 The downlink quality low threshold of HR(V1) to FR quality HO ..........2-2783
2.61.13 The downlink quality high threshold of HR(V1) to FR quality HO .........2-2785
2.61.14 The uplink receive quality low threshold of HR(V3) to FR quality
HO....................................................................................................2-2786
2.61.15 The uplink receive quality high threshold of HR(V3) to FR quality
HO....................................................................................................2-2787
2.61.16 The downlink receive quality low threshold of HR(V3) to FR quality
HO....................................................................................................2-2788
2.61.17 The downlink receive quality high threshold of HR(V3) to FR quality
HO....................................................................................................2-2790
2.61.18 The uplink level of HR to FR quality HO ............................................2-2791
2.61.19 The downlink level of HR to FR quality HO ........................................2-2792
2.61.20 P value of load and quality handover ................................................2-2793
LXIV
SJ-20140527134815-013|2015-03-10(R1.1)
2.61.21 N value of load and quality handover ................................................2-2795

2.61.22 The load of HO from HR(V1) to FR ..................................................2-2796
2.61.23 The load of HO from HR(V3) to FR ...................................................2-2797
2.61.24 The uplink quality of HR to FR load HO.............................................2-2798
2.61.25 The downlink quality of HR to FR load HO.........................................2-2799
2.61.26 The uplink level of HR to FR load HO................................................2-2801
2.61.27 The downlink level of HR to FR load HO ...........................................2-2802
2.62 Power Optimize(GPwOptimize) ....................................................................2-2803
2.62.1 Power Optimize ID ............................................................................2-2803
2.62.2 Assignment UpLink Power Optimize with Quality .................................2-2804
2.62.3 Assignment DownLink Power Optimize with Quality.............................2-2805
2.62.4 Quality threshold of Assignment UpLink Power Optimize .....................2-2806
2.62.5 Quality threshold of Assignment DownLink Power Optimize .................2-2808
2.62.6 UpLink Optimize Method for Assignment or Intracell Handover.............2-2809
2.62.7 DownLink Optimize Method for Assignment or Intracell Handover ........2-2810
2.62.8 UpLink Optimize Method for Intercell Handover ................................... 2-2811
2.62.9 DownLink Optimize Method for Intercell Handover...............................2-2813
2.62.10 UpLink Optimize Method for Immediate Assignment ..........................2-2814
2.62.11 DownLink Optimize Method for Immediate Assignment ......................2-2815
2.62.12 Uplink target level ............................................................................2-2816
2.62.13 Downlink target level........................................................................2-2817
2.62.14 Low RSSI threshold .........................................................................2-2819
2.62.15 High RSSI Threshold .......................................................................2-2820
2.62.16 Ms power inherit threshold ...............................................................2-2822
2.62.17 Downlink minimum level...................................................................2-2823
2.63 BSS Function AMR Configuration(GBssAmr) ................................................2-2824
2.63.1 BSC AMR Configuration ID ................................................................2-2824
2.63.2 AMR full Active Codec Set(4.75kbps) .................................................2-2825
2.63.10 AMR Half Active Codec Set(4.75kbps) ..............................................2-2834
2.63.11 AMR Half Active Codec Set(5.15kbps) ..............................................2-2836
LXV
SJ-20140527134815-013|2015-03-10(R1.1)
2.63.12 AMR Half Active Codec Set(5.9kbps)................................................2-2837

2.63.15 Thresholds of AMR FR 1..................................................................2-2840
2.63.22 Thresholds of AMR HR 1 .................................................................2-2851
2.63.27 Hysteresis of AMR FR 1...................................................................2-2859
2.63.34 Hysteresis of AMR HR 1 ..................................................................2-2870
2.63.39 Enable AMR FR noise control...........................................................2-2878
2.63.40 AMR FR Initial codec mode ..............................................................2-2879
2.63.41 AMR FR Start mode ........................................................................2-2880
2.63.42 Enable AMR HR noise control ..........................................................2-2882
2.63.43 AMR HR Initial codec mode .............................................................2-2883
2.63.44 AMR HR Start mode ........................................................................2-2884
2.63.45 Hysteresis of AMRWFS 1.................................................................2-2885
2.63.46 Hysteresis of AMRWFS 2.................................................................2-2887
LXVI
SJ-20140527134815-013|2015-03-10(R1.1)

2.63.61 Maximum number of Codecs Modes in the Active Codec Set .............2-2906
2.63.62 Full Rate Supported Codec Set(4.75kbps).........................................2-2908
2.63.64 Full Rate Supported Codec Set(5.9kbps) ..........................................2-2910
2.63.70 Half Rate Supported Codec Set(4.75kbps) ........................................2-2918
2.63.72 Half Rate Supported Codec Set(5.9kbps)..........................................2-2920
2.63.76 Mismatch Resolved .........................................................................2-2925
2.64 BSS Dynamic Frequency Configuration(GBssDynFreq) .................................2-2926
2.64.1 BSS Dynamic Frequency Configuration ID ..........................................2-2926
2.64.2 Support Dynamic Frequency Allocate .................................................2-2927
2.64.3 Observe upLink Interference when allocate frequency .........................2-2928
2.64.4 Observe downLink Interference when allocate frequency .....................2-2929
2.64.5 Observe other trx Interference when allocate frequency .......................2-2931
2.64.6 Observe traffic when allocate frequency..............................................2-2932
2.64.7 Observe Interference of neighbor frequency when allocate
frequency ..........................................................................................2-2933
2.64.8 Statistic period of traffic on trx ............................................................2-2934
LXVII
SJ-20140527134815-013|2015-03-10(R1.1)
2.64.9 Reduce of neighbor frequency uplink Interference ...............................2-2935

2.64.10 Reduce of neighbor frequency Downlink Interference.........................2-2936
2.64.11 Use neighbour frequency in cell permitted .........................................2-2937
2.64.12 Use interference threshold ...............................................................2-2938
2.64.13 Interference threshold ......................................................................2-2940
2.64.14 Forbid TRX due quality ....................................................................2-2942
2.64.15 UplinkThreshold of Forbid TRX due quality........................................2-2943
2.64.16 Downlink Threshold of Forbid TRX due quality ..................................2-2944
2.64.17 Mimimum Quality Sample ................................................................2-2945
2.64.18 Level difference of Subcell1 and Subcell2 .........................................2-2947
2.65 BSS Dynamic Frequency Pool Configuration(GBssDynFreqPool) ...................2-2948
2.65.1 BSS Dynamic Frequency Pool ID .......................................................2-2948
2.65.2 Frequency Band................................................................................2-2949
2.65.3 Arfcn List ..........................................................................................2-2950
2.66 BSS IFTA Configuration(GBssIfta) ................................................................2-2951
2.66.1 BSS IFTA Configuration ID.................................................................2-2951
2.66.2 Support IFTA.....................................................................................2-2952
2.66.3 Perform IFTA channel check ..............................................................2-2953
2.66.4 Retry allocation Times after IFTA channel check fail ............................2-2955
2.66.5 Uplink Threshold of send interference information ...............................2-2956
2.66.6 Downlink Threshold of send interference information ...........................2-2957
2.66.7 Period for IFTA measurement report process .....................................2-2958
2.66.8 Period for IFTA transfer measurement information to other RRM ..........2-2959
2.66.9 IFTA channel check timer...................................................................2-2960
2.66.10 History measurement record confidence probability ...........................2-2961
2.66.11 History measurement record Update period.......................................2-2963
2.66.12 History measurement record Update factor .......................................2-2964
2.66.13 History measurement record Guard Period........................................2-2965
2.66.14 Report IFTA channel info..................................................................2-2966
2.66.15 Report IFTA info of IMSI...................................................................2-2967
2.66.16 GPS State Delay .............................................................................2-2968
2.66.17 UpLink Noise Level..........................................................................2-2970
2.66.18 DownLink Noise Level .....................................................................2-2971
2.66.19 IFTA Wait Measurement Report Timer ..............................................2-2972
2.66.20 IFTA Wait Measurement Report Retries ............................................2-2973
2.66.21 Uplink Neighbour Frequence Reduce................................................2-2974
2.66.22 Downlink Neighbour Frequence Reduce ...........................................2-2976
LXVIII
SJ-20140527134815-013|2015-03-10(R1.1)
2.66.23 Method for deal other user when IFTA allocate Channel.....................2-2977
2.66.24 Permitted Uplink CIR Reduce of other user .......................................2-2978
2.66.25 Permitted downlink CIR Reduce of other user....................................2-2979
2.66.26 Interference difference of Uplink Same TSC and different TSC ...........2-2980
2.66.27 Interference difference of Downlink Same TSC and different TSC for
SAIC MS ...........................................................................................2-2982
2.66.28 Interference difference of Downlink Same TSC and different TSC for
NON SAIC MS...................................................................................2-2983
2.66.29 History Record Threshold.................................................................2-2984
2.66.30 Use Last Measurement Report .........................................................2-2985
2.66.31 Uplink Cir difference1 of HR .............................................................2-2986
2.66.32 Downlink Cir difference1 of HR .........................................................2-2988
2.66.33 Uplink Cir difference2 of HR .............................................................2-2990
2.66.34 Downlink Cir difference2 of HR .........................................................2-2991
2.66.35 Use Low Level of neighbour cell .......................................................2-2993
2.66.36 Threshold for IFTA ignore interference ..............................................2-2994
2.66.37 IFTA channel adopt uplink power optimize.........................................2-2995
2.66.38 IFTA channel adopt downlink power optimize ....................................2-2996
2.66.39 CIR allowance for IFTA channel uplink power optimize.......................2-2998
2.66.40 CIR allowance for IFTA channel downlink power optimize ..................2-2999
2.66.41 Method for IFTA channel uplink power optimize .................................2-3000
2.66.42 Method for IFTA channel downlink power optimize.............................2-3001
2.67 Cell IFTA Configuration(GCellIfta).................................................................2-3002
2.67.1 Cell IFTA Configuration ID..................................................................2-3002
2.67.2 TSCs Used by IFTA ...........................................................................2-3003
2.67.3 Time of use last Measurement report ..................................................2-3004
2.67.4 IFTA Channel Search Order ...............................................................2-3006
2.67.5 Interference Cell Average Window......................................................2-3007
2.67.6 IFTA Channel Priority.........................................................................2-3008
2.67.7 DN of IftaMa for this cell.....................................................................2-3009
2.67.8 Prefer IFTA channel...........................................................................2-3010
2.67.9 Uplink Target CIR .............................................................................. 2-3011
2.67.10 Uplink Minimum CIR ........................................................................2-3013
2.67.11 Downlink Target CIR ........................................................................2-3014
2.67.12 Downlink Minimum CIR....................................................................2-3015
2.67.13 Use IFTA.........................................................................................2-3017
2.68 BSS IFTA MA Configuration(GBssIftaMa) .....................................................2-3018
2.68.1 BSS IFTA Ma Configuration ID ...........................................................2-3018
LXIX
SJ-20140527134815-013|2015-03-10(R1.1)
2.68.2 Frequency Band of IftaMa ..................................................................2-3019

2.68.3 Frequency hopping............................................................................2-3020
2.68.4 Frequency List ..................................................................................2-3021
2.69 Share Area Configuration(GMocnArea).........................................................2-3023
2.69.1 Share Area ID ...................................................................................2-3023
2.69.2 Mocn Area Attribute...........................................................................2-3024
2.69.3 PlmnGroup DN..................................................................................2-3025
2.69.4 GPLMN DN.......................................................................................2-3026
2.69.5 Service Distribute Ratio .....................................................................2-3027
2.70 BSC User Plane Reserved Configuration(GBssFunctionUpRsv) .....................2-3029
2.70.10 Global Reserved Parameter 10 ........................................................2-3038
2.70.11 Global Reserved Parameter 11 .........................................................2-3039
2.71 Cell User Plane Reserved Configuration(GCellUpRsv)...................................2-3049
2.71.1 Cell User Plane Reserved Configuration ID .........................................2-3049
LXX
SJ-20140527134815-013|2015-03-10(R1.1)

2.71.10 Cell Reserved Parameter 9 ..............................................................2-3059
2.72 Dynamic Power Share(GDynPwShare) .........................................................2-3071
2.72.1 Dynamic Power Share ID ...................................................................2-3071
2.72.2 Support dynamic power share ............................................................2-3072
2.72.3 Power promote level for power sharing ...............................................2-3073
2.72.4 Power promote for performance optimize ............................................2-3074
2.72.5 Power promote level for performance optimize ....................................2-3076
2.72.6 Increase 8Psk Power.........................................................................2-3077
2.72.7 Power Warning Threshold ..................................................................2-3079
2.72.8 Decrease power consume by handover ..............................................2-3080
2.72.9 N value of power Cannot Increase ......................................................2-3081
2.72.10 P value of power Cannot Increase ....................................................2-3082
2.72.11 Power ratio for dynamic halfrate........................................................2-3084
2.72.12 Power Warning report period ............................................................2-3085
2.72.13 Use Downlink minimum level............................................................2-3086
LXXI
SJ-20140527134815-013|2015-03-10(R1.1)
This page intentionally left blank.
LXXII
SJ-20140527134815-013|2015-03-10(R1.1)
About This Manual

Purpose
This manual describes the radio parameters of ZXG10 iBSC to help users in configuring
radio parameters for ZXG10 iBSC.
Intended Audience
l
l
Network management engineers

Maintenance engineers
What Is in This Manual

This manual contains the following chapters:
Chapter
Overview
1, Guide to Reading This Manual
Describes how to use this manual.
2, GSM Radio Parameters
Describes the radio parameters of ZXG10 iBSC.
I
SJ-20140527134815-013|2015-03-10(R1.1)
This page intentionally left blank.
II
SJ-20140527134815-013|2015-03-10(R1.1)
Chapter 1
Guide to Reading This

Manual
A parameter table template is shown in Table 1-1. The parameter description in this manual
is based on the following template.
Table 1-1 How to Read Parameter Table
Radio Parameter Name
Full Name
The name of the parameter shown on user interface
Abbreviated Name
The abbreviated name of the parameter
Managed Object
The managed object which the parameter belongs to

Data Item Description
3GPP Name
Parameter name in 3GPP specifications
3GPP Reference
3GPP specifications reference
Description
A brief introduction of the parameter
Instance
The instance for which the parameter is configured.
Related FG
The related features of the parameter
Value Range and Step
The value range and step of the parameter
Unit
the value unit of the parameter
Default Value
The default value, as initially set by the system, if not explicitly set at
MO creation
Related Parameters
Other parameter(s) that can influence the described parameter
Restriction with Related
Relation between related parameters
Parameters
Value Type
the value type of the parameter
Parameter TYPE
The parameter is divided into the following four category:

l
Fixed the parameter value can be set default and need not adjust
normally
Fixed-keep monitoringthe parameter value can be initially set

default and adjust later according to network performance
Network Planing & Optimization: the value is set according to

Network planning and optimization
Don't Carethe parameter need not care

1-1
SJ-20140527134815-013|2015-03-10(R1.1)
ZXG10 iBSC Radio Parameters Reference
Negotiation With CN
Indication whether the parameter should negotiate with core network

setting
Function Switch
Indication whether the parameter is a switch parameter
Configuration Rule and
A brief configuration rule introduction for the parameter
Adjustment Suggestion
Default Value
The reason for the default value setting
Configuration Reason
Change take effect
Indicate when the new value will take effect after the parameter value
is modified
Service or Node Impact
Indicate whether the service or node is affected when the parameter

valued is modified
Equipment Impaction
The equipment impaction when the parameter value is modified can be
Level
divided into four level according to the object impacted:

0: Indicate no impaction when the parameter is modified
1: Indicate impaction on the cell when the parameter is modified
2: Indicate impaction on the BTS when the parameter is modified
3: Indicate impaction on the BSC when the parameter is modified
Service Impaction Level
The service impaction when the parameter value is modified can be

divided into four level:
0: Indicate no impaction on the active user and idle user when the
parameter is modified
1: Indicate impaction on the idle user but no impaction on the active user
2: Indicate no impaction on the idle user and impaction on the active
user. The ongoing service will interrupt but the service can be resume in
short time (60s) for example the user can re-initial the service at once
3: Indicate impaction on the idle user and the active user. The network
service will interrupt for some time and will resume later
Access
Indication whether the parameter can be read (Read), written (Write) or

modified after created (Restricted)
OMC Access path
Path for how to Access the parameter in OMC
Parameter Modifying
Whether this parameter is modified in this version
Version
Parameter Modifying
Modification details of this parameter in this version
Detail
In this manual, it is recommended to use Abbreviated Name as keyword to query

information of target parameters.
1-2
SJ-20140527134815-013|2015-03-10(R1.1)
Chapter 2
GSM Radio Parameters

Table of Contents
GSM Logical Configuration(GBssFunction) ................................................................2-2
BSS Function Timer(GBssFunctionTimer) ..............................................................2-141
BSS Function Handover Control(GBssHandoverControl) .......................................2-235
eMLPP Configuration(GBssEmlpp) ........................................................................2-270
eMLPP User Priority Configuration(GEmlppUserPriority)........................................2-292
BSS Function PS(GBssFunctionPS) ......................................................................2-315
Common Measure and Information Exchange(GCommMeas) ................................2-435
BSC Precise Paging Configuration(GBssPrecisePaging)........................................2-456
BSC Reserved Configuration(GBssFunctionRsv) ...................................................2-467
External GSM Cell Configuration(GExternalGsmCell).............................................2-488
External UTRAN FDD Cell Configuration(GExternalUtranCellFDD) ........................2-533
External UTRAN TDD Cell Configuration(GExternalUtranCellTDDLcr) ...................2-546
External E-UTRAN FDD Cell Configuration(GExternalEutranCellFDD)...................2-561
External UTRAN FDD Cell CRRM Configuration(GCrrmNCellLdFDD)....................2-572
External UTRAN TDD Cell CRRM Configuration(GCrrmNCellLdTDDLcr) ...............2-599
External E-UTRAN TDD Cell Configuration(GExternalEutranCellTDD)...................2-626
GSM Cell Configuration(GGsmCell) .......................................................................2-637
Cell Precise Paging Configuration(GCellPrecisePaging).........................................2-903
Location Area(GLocationArea) ...............................................................................2-909
Routing Area(GRoutingArea)..................................................................................2-916
AMR Configuration(GCellAmr) ...............................................................................2-919
Frequency Hopping System(GHoppingFrequency)...............................................2-1024
Baseband Hopping System(GHoppingBaseband) ................................................2-1029
Handover Control(GHandoverControl)..................................................................2-1034
SDCCH Handover Control(GSdHandoverControl) ................................................2-1277
VAMOS Configuration(GVamos)...........................................................................2-1383
UTRAN Measurement(GUtranMeasure) ...............................................................2-1433
E-UTRAN Measurement(GEutranMeasure)..........................................................2-1513
UTRAN Handover Control(GUtranHandoverControl) ............................................2-1558
Site(GBtsSiteManager)......................................................................................... 2-1611
Site baseband share Configuration(GSiteBaseBandShare) ..................................2-1628
Bvc (GBvc)...........................................................................................................2-1635
GPRS Configuration(GCellPs)..............................................................................2-1639
PS Channel Schedule Configuration(GPsChannelSchedule)................................2-1765
GPRS-EDGE Schedule Configuration(GGprsEdgeSchedule)...............................2-1790
NACC Configuration(GNACC)..............................................................................2-1799
NC2 Configuration(GCellPsNc2) ..........................................................................2-1805
2-1
SJ-20140527134815-013|2015-03-10(R1.1)
DTM Configuration(GDTM) ..................................................................................2-1923

PS Power Control(GPsPowerControl) ..................................................................2-1928
EDGE Configuration(GCellEdge)..........................................................................2-2027
Enhanced EDGE Configuration(GEhancedEdge) .................................................2-2063
Serving Cell CRRM Configuration(GCrrmCellLd)..................................................2-2077
SubCell(GSubCell) ...............................................................................................2-2098
Subcell Handover Control(GScHandoverControl) .................................................2-2102
SubCell PS Channel Allocation Configuration(GSubCellPsAlloc)..........................2-2153
Power Control(GPowerControl) ............................................................................2-2182
PS Handover Control(GPsHandoverControl)........................................................2-2322
Trx(GTrx)..............................................................................................................2-2417
Ts(GTs) ................................................................................................................2-2443
Adjacent GSM Cell Configuration(GGsmRelation) ................................................2-2458
Interfere Gsm Cell Configuration(GGsmIntfRelation) ............................................2-2557
Visit Paging Cell(GGsmVpcRelation)....................................................................2-2572
Adjacent UTRAN Cell Configuration(GUtranRelation)...........................................2-2576
Adjacent E-UTRAN Cell Configuration(GEutranRelation) .....................................2-2596
User and Service Resource Schedule(GUserAndSrvBasedSche) ........................2-2609
User Priority and Service Type Configuration(GPsUserAndSrvType) ....................2-2616
Cell Reserved Configuration(GCellRsv)................................................................2-2628
Priority-based Resel Configuration(GPriorityResel) ..............................................2-2650
BSC Um Soft Synchronous Configuration(GUmsyn).............................................2-2693
AMR Handover Control(GAmrHandoverControl) ..................................................2-2740
FH Handover Control(GFhHandoverControl)........................................................2-2769
Power Optimize(GPwOptimize) ............................................................................2-2803
BSS Function AMR Configuration(GBssAmr) .......................................................2-2824
BSS Dynamic Frequency Configuration(GBssDynFreq) .......................................2-2926
BSS Dynamic Frequency Pool Configuration(GBssDynFreqPool) ........................2-2948
BSS IFTA Configuration(GBssIfta)........................................................................2-2951
Cell IFTA Configuration(GCellIfta) ........................................................................2-3002
BSS IFTA MA Configuration(GBssIftaMa).............................................................2-3018
Share Area Configuration(GMocnArea) ................................................................2-3023
BSC User Plane Reserved Configuration(GBssFunctionUpRsv) ..........................2-3029
Cell User Plane Reserved Configuration(GCellUpRsv) .........................................2-3049
Dynamic Power Share(GDynPwShare) ................................................................2-3071
2.1 GSM Logical Configuration(GBssFunction)

2.1.1 BSS ID
Full Name
BSS ID
Abbreviated Name
GBssFunctionId
2-2
SJ-20140527134815-013|2015-03-10(R1.1)
Chapter 2 GSM Radio Parameters
Managed Object
GSM Logical Configuration(GBssFunction)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a BSS ID.
Instance
BSC
Related FG
N/A
1..4095
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
It must be unique under the parent object.
Default Value Configuration
N/A
Reason
Change take effect
Unmodifiable
No
Equipment Impaction Level
Access
Restricted
OMC Access path
GUI: Managed Element->GSM Logical Configuration
Parameter Modifying Version
Versions earlier than V6.50.100/V6.30.100
Parameter Modifying Detail
N/A
2.1.2 User Label

Full Name
User Label
2-3
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
userLabel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a user label.
Instance
BSC
Related FG
N/A
0..80
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Fixed-keep monitoring
Negotiation With CN
No
Function Switch
No
It is defined by the user.
N/A
Reason
Change take effect
Immediately at Commit
No
Access
Read/Write
OMC Access path
N/A
2.1.3 Managed Object Description

2-4
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Managed Object Description
Abbreviated Name
description
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter describes the managed object.
Instance
BSC
Related FG
N/A
GBssFunctionSeq=%, ##GBssFunctionSeq
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
The description for an object is set to a service field or a combination
of service fields, for example, LAC=1, CI=1.
N/A
Reason
Change take effect
Unmodifiable
No
Access
Read
OMC Access path
N/A
2-5
SJ-20140527134815-013|2015-03-10(R1.1)
Note:
The user Label and description in other Managed Object can refer to the definitions here.
2.1.4 Load indication allowed

Full Name
Load indication allowed
Abbreviated Name
LoadInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The load indication process allows adjacent BSCs to obtain the load
information of the cells at the border that can be used as references
during both normal handover and intra-BSC traffic handover.
This parameter determines whether the load indication process is
allowed, and the validity of parameters Load indication valid time and
Load indication period. This means that if this parameter is set to "0
(Not Send Load Indication)", the latter two parameters are invalid.
Instance
BSC
Related FG
ZGO-02-02-007 Traffic Based Handover
0: Not Send Load Indication

1: Send Load Indication Periodically
2: Send Load Indication When Congestion
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-6
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter obtains the load situation of neighbor cells. It can
be used to observe the load status of neighbor cells during a

handover. This parameter is not used in most cases and is enabled
per operator's demand.
Currently, this function is rarely used. It is used only upon operator's
Reason
request.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.5 Load indication Valid Time

Full Name
Load indication Valid Time
Abbreviated Name
LoadValidTime
Managed Object

3GPP Name
Time indication IE
3GPP Reference
N/A
Description
During the load indication process, the BSC periodically sends the
BSSAP LOAD INDICATION message to the MSC, informing the
MSC of the load status. The BSSAP LOAD INDICATION message
contains the time indication information,which indicates the valid
time period of the service load information. The MSC then relays the
information in the BSSAP LOAD INDICATION message to adjacent
BSCs. This parameter indicates the valid time period of the load
information. The value 255 indicates that the load information is
permanently valid.
Instance
BSC
Related FG
ZGB-03-04-001 BSC Load Control
1..255
Unit
10s
2-7
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
18
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
If this parameter is set to a larger value, the valid time of the load
information is long but the precision is low. If this parameter is set to

a smaller value, the valid time of the load information is short but
the precision is high. It is recommended that this parameter be set
to a value greater than the load indication period. In this way,valid
load data can always be obtained.
The default parameter value is set because the load condition does
Reason
not change greatly within 180 seconds. The default parameter value
can reflect the current load condition.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.6 Load Indication Period

Full Name
Load Indication Period
Abbreviated Name
LoadIndPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-8
SJ-20140527134815-013|2015-03-10(R1.1)
Description
During the load indication process, the BSC periodically sends the
BSSAP LOAD INDICATION message to the MSC, informing the
MSC of the load status. The BSSAP LOAD INDICATION message
contains the time indication information, which indicates the valid
time period of the service load information. The MSC then relays the
information in the BSSAP LOAD INDICATION message to adjacent
BSCs. When the load indication message is sent periodically,
this parameter indicates the period for the BSC to send the load
indication message.
Instance
BSC
Related FG
10..65530
Unit
100ms
Default Value
1500
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
This parameter is set to the default value and requires no
modification. If this parameter is set to a larger value, the change of

the BSC load status cannot be reflected precisely. If this parameter
is set to a smaller value, the load report messages are sent too
frequently, which wastes the signaling link resources.
If this parameter is set to a smaller value, the load situation of a
Reason
cell can be reflected more accurately, but it leads to more signaling

messages over the A interface. If this parameter is set to a larger
value, the load situation of a cell is reflected less accurately. The
default parameter value is set because the load situation does not
change greatly within 150 seconds.
Change take effect
No
Access
Read/Write
OMC Access path
2-9
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.1.7 Send assignment failure allowed in outer direct retry

procedure
Full Name
Send assignment failure allowed in outer direct retry procedure
Abbreviated Name
ExDRSendAssFail
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the Assignment Failure

message is allowed to be sent to the MSC if the external directed
retry procedure fails. Options include:
"1": The Assignment Failure message is allowed to be sent.
"0": The Assignment Failure message is NOT allowed to be sent.
Instance
BSC
Related FG
ZGB-03-01-002 Directed Retry
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
When this function is enabled, the counter of assignment failures is
incremented because the MS still attempts directed retries. Besides,

some MSCs do not support the sending of assignment failure
messages during the external directed retry process. The default
parameter value is set to avoid affecting normal statistics.
2-10
SJ-20140527134815-013|2015-03-10(R1.1)
When this function is enabled, the counter of assignment failures is
Reason
incremented because the MS still attempts directed retries. Besides,

some MSCs do not support the sending of assignment failure
messages during the external directed retry process. The default
parameter value is set to avoid affecting normal statistics.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.8 TFO Enable

Full Name
TFO Enable
Abbreviated Name
TFOControl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is one of TFO control parameters, which determines

whether to enable TFO.
Options:
0: No
1: Yes
When TFO is disabled, which means to set TFOControl_0 to
"0", other related functions are also disabled. This means that
TFOControl_1, TFOControl_2 and TFOControl_3 are set to 0.
TFO is an inband protocol. The TCs on both sides use this protocol
to negotiate the encoding and decoding after a call is set up. The
decoder of the sender and the coder of the receiver are bypassed,
and the voice frames used over the air interface are directly sent to
the receiver to improve voice quality.
If the speech version supported by the cell is not AMR, TFO can be
set up if the speech versions supported by two cells are the same.
2-11
SJ-20140527134815-013|2015-03-10(R1.1)
If the speech version is AMR, TFO can be set up if the supported

speech codec types are also the same. Otherwise, TFO cannot
be set up.
If IPA is configured, the speech coding negotiation is performed
on the CN side.
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Network Planing&Optimization
Negotiation With CN
No
Function Switch
Yes
This function is enabled when required. The TFO function improves
the MOS value of speech. It is recommended that this function be

enabled when high speech MOS quality is required.
It is a functional switch. The default parameter value is set to "0
Reason
(No)".
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.9 Report voice quality

Full Name
Report voice quality
2-12
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
VoiceQualityReport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used by the BTS to determine whether to carry

speech quality related parameters in the measurement report
and during measurement report preprocessing and enhanced
measurement report preprocessing.
Instance
BSC
Related FG
ZGO-06-01-002 Speech Quality Supervision
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is enabled when required.
It is not a basic function. The default parameter value is set to "0
Reason
(Off)".
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2-13
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.10 R99 Ind

Full Name
R99 Ind
Abbreviated Name
R99Ind
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Indication of the R99 protocol version. The BSS determines whether

to encode or decode message fields added in the protocol later
than R99 according to this parameter. For more information, refer
to SI13-related descriptions in TS 44.018.
Instance
BSC
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
This function is enabled when R99 protocol version and above
should be supported on both CN and MS sides.
The default parameter value is set because R99 protocol version
Reason
and above should be supported on both CN and MS sides.
Change take effect
No
Access
Read/Write
OMC Access path
2-14
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.1.11 DCS1800/PCS1900 support

Full Name
DCS1800/PCS1900 support
Abbreviated Name
FuncExt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the supported frequency band. If this

parameter is set to "0", frequency band DCS1800 is supported. If
this parameter is set to "1", frequency band PCS1900 is supported.
This parameter cannot be modified after being set.
Instance
BSC
Related FG
N/A
0: DCS1800
1: PCS1900
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the on-site frequency band plan.
The default parameter value is set because frequency band
Reason
DCS1800 is used more frequently.
Change take effect
Yes
2-15
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
N/A
2.1.12 External cell load notify

Full Name
External cell load notify
Abbreviated Name
NotifyOutCellLoad
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to include the load information

of the local cell into the Old BSS to New BSS Information IE when
the traffic of the cell under the current BSC is handed over to a cell
under another BSC.
Instance
BSC
Related FG
ZGB-03-03-003 LAPD Cluster
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
This function is disabled by default. Whether to enable this function
depends on the on-site requirements.
2-16
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
(Off)".
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.13 Neighbor cell load valid duration

Full Name
Neighbor cell load valid duration
Abbreviated Name
AdjCellLoadLife
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the valid period of a neighbor cell's load

information from being obtained to becoming invalid.
Instance
BSC
Related FG
ZGB-03-03-003 LAPD Cluster
1..255
Unit
10s
Default Value
Related Parameters
NotifyOutCellLoad
This parameter is valid only when the NotifyOutCellLoad switch
Parameters
is enabled.
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-17
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is set to the default value. If this parameter is set
to a larger value, the valid time of the load information previously

obtained by a neighbor cell is long but the precision is low. If this
parameter is set to a smaller value, the valid time of the load
information is short and the load information should be informed
frequently.
The default parameter value is set because the load of neighbor
Reason
cells in the network does not change greatly within 60 seconds and
the validity is acceptable.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.14 Pre-Access Control for IP Transmission

Full Name
Pre-Access Control for IP Transmission
Abbreviated Name
IPAbisFilter
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to perform pre-admission

control on the IP transmission resources over the Abis interface
by the CRRM module for a 2G neighbor cell under the current
BSC during handover. If pre-admission control fails, this cell is not
selected as the target cell for handover to accelerate successful
handover and reduce abnormal procedures.
Instance
BSC
Related FG
ZMF01-10-010 Abis/Iub Static IP Transmission Sharing

ZMF01-10-013 GU Dynamical IP Transmission Resource Sharing
2-18
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is disabled by default. This parameter is set based
on the actual use.
The default parameter value is set to add new restrictions on
Reason
neighbor cell selection during a handover to avoid improper

handovers.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.15 Using load information provided by CRRM

Full Name
Using load information provided by CRRM
Abbreviated Name
LoadClassScrPath
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-19
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines whether to use the load information

provided by CRRM or by the database for handover decision. If the
load information provided by the database is used, the handover
decision is relatively accurate for high traffic. If the load information
provided by CRRM is used, the handover decision is relatively
accurate for low traffic.
Instance
BSC
Related FG

0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
The default value is recommended, meaning that load information
from the database is recommended. No modification is needed.
The default value is set to obtain more accurate load information
Reason
from the database because the actual traffic is generally high.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.100/V6.30.100
N/A
2.1.16 Automatic Resource Indication Threshold

2-20
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Automatic Resource Indication Threshold
Abbreviated Name
ResourceIndThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold for the BSC to send a

resource indication to the MSC. The value indicates the proportion of
the currently available channels in the total channels. If the currently
available resources of the cell are fewer than the specified threshold,
the BSC sends a resource indication to the MSC, indicating the
resource situation of this cell. The resources are configured by O&M.
The resource indication procedure of the BSC has the following
four modes:
1. Automatic sending: Upon receiving a BSSAP RESOURCE
REQUEST message, the BSC immediately returns a BSSAP
RESOURCE INDICATION message carrying no resource
information as response. Afterwards, when the condition (the
service threshold or the time interval between two messages) set by
O&M of the BSC is met for automatic resource information sending,
the BSC automatically sends a BSSAP RESUORCE INDICATION
message to the MSC. The message sending interval is specified by
the Periodicity IE in the BSSAP RESOURCE REQUEST message.
If the Periodicity IE is set to 0, the BSC ignores this value.
2. One-time sending: Upon receiving a BSSAP RESOURCE
REQUEST message, the BSC immediately returns a BSSAP
RESOURCE INDICATION message carrying the resource
information. If the BSSAP RESOURCE REQUEST message does
not contain the Extended Resource Indication IE, the BSC stops
sending responses, and waits for the next BSSAP RESOURCE
REQUEST message. If the BSSAP RESOURCE REQUEST
message contains the Extended Resource Indication IE, the BSC
follows the rule set by Subsequent Mode in the message, as in
mode 4. If the previous mode is 1 or 3, the BSC uses the previous
mode. Otherwise, mode 4 is used.
3. Periodic sending: Upon receiving a BSSAP RESOURCE
REQUEST message, the BSC returns a BSSAP RESOURCE
INDICATION message containing the resource information, and
then sends the message periodically. If the Periodicity IE in the
BSSAP RESOURCE REQUEST message is not set to 0, the
message sending period is the value of the Periodicity IE multiplied
by 100 ms. If the Periodicity IE is set to 0, the BSSAP RESOURCE
REQUEST message is considered incorrect.
2-21
SJ-20140527134815-013|2015-03-10(R1.1)
4. Stop mode: Upon receiving a BSSAP RESOURCE REQUEST

message, the BSC returns a BSSAP RESOURCE INDICATION
message containing no resource information as response.
Afterwards, the BSC does not send any information about the cell
resources to the MSC.
Instance
BSC
Related FG
N/A
0..100
Unit
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
This parameter is set to the default value. If this parameter is set to
a larger value, it is easy to trigger the automatic resource indication.
The default parameter value is set based on the empirical value of
Reason
the threshold for the BSC to report the resource indication to the
MSC. If the proportion of available idle channels is less than 30%,
it is recommended that the BSC report the resource indication to
the MSC.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.17 Access class parameter config select

2-22
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Access class parameter config select
Abbreviated Name
accconfigselect
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable the user access

control function based on SIM card levels.
Four sets of access control parameters can be configured in the
back end. This parameter specifies whether to enable the user
access control function based on SIM card levels and, if enabled,
which set of access control parameters is used. Options include:
0: Disable the user access control function
1: Enable the first ACC configuration data as user access control
parameters
2: Enable the second ACC configuration data as user access
control parameters
3: Enable the third ACC configuration data as user access control
parameters
4: Enable the fourth ACC configuration data as user access control
parameters
Instance
BSC
Related FG

parameters
control parameters
parameters
parameters
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-23
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
Yes
This function is enabled when the operator requires forbidding some
MSs to access the network without any condition.
This function is used to limit the access of some classes of MSs. It
Reason
is used for testing or in some special cases. The default parameter

value is set to "0 (Disable the user access control function)".
Change take effect
Yes
Access
Read/Write
OMC Access path
N/A
2.1.18 First barred class

Full Name
First barred class
Abbreviated Name
firstbarredclass
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ACC data parameter used for user
access control based on SIM card levels. It specifies the first SIM
card level that is currently forbidden for access in the network.
Instance
BSC
Related FG
0..9
Unit
N/A
Default Value
[0,0,0,0]
Related Parameters
N/A
2-24
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long[4]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on on-site situations. This parameter
can be set to the default value because SIM cards are forbidden
to access the network in cycle.
It is a manual flow control parameter and is often modified manually.
Reason
The default parameter value is set to "0".
Change take effect
Yes
Access
Read/Write
OMC Access path
N/A
2.1.19 Barred class windows

Full Name
Barred class windows
Abbreviated Name
barredclasswindows
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
access control based on SIM card levels. It specifies the number of
SIM card levels that are successively forbidden for access starting
from the first SIM card level.
Instance
BSC
Related FG
2-25
SJ-20140527134815-013|2015-03-10(R1.1)
1..10
Unit
N/A
Default Value
[1,1,1,1]
Related Parameters
N/A
N/A
Parameters
Value Type
long[4]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on on-site situations. If the operator
wants to extend the flow control, this parameter can be set to a

larger value.
Reason
The default parameter value is set to "1" to prevent too many

subscribers from being affected prior to manual modification.
Change take effect
Yes
Access
Read/Write
OMC Access path
N/A
2.1.20 Barred time step

Full Name
Barred time step
Abbreviated Name
barredtimestep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-26
SJ-20140527134815-013|2015-03-10(R1.1)
Description
access control based on SIM card levels. To avoid that the users
with the same SIM card level are always forbidden for access when
ACC parameters are valid, common users with each SIM card level
can be forbidden for access recurrently. This parameter specifies
the length of time when the users with a SIM card level are forbidden
for access.
Instance
BSC
Related FG
1..3600
Unit
N/A
Default Value
[30,30,30,30]
Related Parameters
N/A
N/A
Parameters
Value Type
long[4]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on on-site situations. It is suggested
not setting this parameter to a larger value because otherwise MSs

with each class are barred for a long time period, which leads to
bad user experience.

Reason

The default parameter value is set because the barring time period
of 30 seconds does not affect subscribers too much and does not
cause user complaints.
Change take effect
Yes
Access
Read/Write
OMC Access path
N/A
2-27
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.21 Access Control

Full Name
Access Control
Abbreviated Name
accesscontrol
Managed Object

3GPP Name
Access Control Class
3GPP Reference
N/A
Description
This parameter determines whether to allow MSs to access the local

BSC based on the access priority classes. There are 15 access
priority classes. Class 10 is for special purposes and not used for
access control as specified in the protocol.
Cn indicates the MSs with access priority class n
(n=0,1,,9,11,,15)
When Cn is set to 0, the MSs with class n are not barred, which
means that they are allowed to access the cell.
When Cn is set to 1, the MSs with class n are not allowed to access
the cell.
This parameter is valid when the UseCellAcc parameter is set to 0.
Otherwise, the AccessControl parameter at the cell level is used
for access control.
Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[16]
Parameter Type
Negotiation With CN
No
Function Switch
No
If MSs with a specified class are expected to access the network,
this parameter corresponding to this class is set to 0. If MSs

with a specified class are not allowed to access the network, this
parameter corresponding to this class is set to 1.
2-28
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is set to allow all MSs to access the cell.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path
N/A
2.1.22 Congestion Threshold for Send Load Indication

Full Name
Congestion Threshold for Send Load Indication
Abbreviated Name
LoadIndThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold for sending the load

indication. If the load of a cell under the local BSC is higher than
the threshold specified by this parameter, the system initiates the
load indication procedure to allow adjacent BSCs to obtain the load
information of the cells at the border that can be used as references
during both normal handover and intra-BSC traffic handover.
Instance
BSC
Related FG
N/A
0..100
Unit
Default Value
100
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-29
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is not used in this version and requires no
modification.
It is a function-related parameter. The default parameter value is set
Reason
to not send the load indication.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.23 Forbid Handover According to Resource Threshold of Load

Indication
Full Name
Forbid Handover According to Resource Threshold of Load

Indication
Abbreviated Name
LoadForbidHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to prohibit handover to an

external neighbor cell with the resource usage higher than that of
the load indication.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
2-30
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
modification.
It is a function-related parameter. The default value is set to "0 (No)".
Reason
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.24 Resource Threshold of Load Indication for Forbid Handover

Full Name
Resource Threshold of Load Indication for Forbid Handover
Abbreviated Name
LoadThsForbidHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the resource usage of an external neighbor cell is higher than the

threshold specified by this parameter, the system does not trigger
handover towards this cell.
Instance
BSC
Related FG

2-31
SJ-20140527134815-013|2015-03-10(R1.1)
0..100
Unit
Default Value
100
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
modification.
It is a function-related parameter. The default value is set to
Reason
allow handover to the external neighbor cell that initiates the load
indication process.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.25 Use system message method when MSC over loaded or

link blocked
Full Name
Use system message method when MSC over loaded or link blocked
Abbreviated Name
MscSysInfoFlc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-32
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines whether to use system messaging for

flow control when all MSCs are overloaded (Flow control must be
enabled by the overload) or signaling points are congested.
By using system messaging, the access of some MSs is forbidden
based on the ACCN parameter carried in system messages. By
using FUC, the access of some MSs is forbidden based on the
number of MSs that are randomly accessed to the RACH.
Instance
BSC
Related FG
1: SystemInfo Method
0: FUC Method
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is valid only for MSC overload and signaling point
congestion. Using system messaging-based flow control is the

most effective control method, which implements flow control
by forbidding MSs with specified classes to access the network
or forbidding specified cells to be accessed. Using FUC-based
flow control is to implement flow control based on causes. It is
recommended that FUC-based flow control is used.
The default parameter value is set because the FUC-based flow
Reason
control is initiated based on the importance of services. When the

MSCs are not heavily overloaded or the signaling points are not
heavily congested, the FUC-based flow control has less impact on
user satisfaction than the system messaging-based flow control.
Change take effect
Yes
Access
Read/Write
OMC Access path
2-33
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.1.26 Start system message method for CPU overload

Full Name
Start system message method for CPU overload
Abbreviated Name
CpuSysInfoFlc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable system

messaging-based flow control when the CPU usage of the CMP
increases to the threshold of the system messaging-based flow
control.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The CpuSysInfoFlc and CpuFucFlc parameters are valid only for
flow control of the CPU overload. Both system messaging-based

and FUC-based flow control can be implemented to the CPU
overlaod at the same time.
The default parameter value is set because it is recommended that
Reason
the FUC-based flow control be preferred.
Change take effect
2-34
SJ-20140527134815-013|2015-03-10(R1.1)
Yes
Access
Read/Write
OMC Access path
N/A
2.1.27 Start FUC flow control for CPU overload

Full Name
Start FUC flow control for CPU overload
Abbreviated Name
CpuFucFlc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable FUC-based flow

control when the CPU usage of the CMP increases to the threshold
of the FUC-based flow control.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-35
SJ-20140527134815-013|2015-03-10(R1.1)
The CpuSysInfoFlc and CpuFucFlc parameters are valid only for
flow control of the CPU overload. Both system messaging-based

and FUC-based flow control can be implemented to the CPU
overlaod at the same time.
The default parameter value is set because the FUC-based flow
Reason
control is initiated based on the importance of services. When the

CUP is not overloaded, the FUC-based flow control has less impact
on user satisfaction than the system messaging-based flow control.
Change take effect
Yes
Access
Read/Write
OMC Access path
N/A
2.1.28 The maximum control level for MSC overload or link block
Full Name
The maximum control level for MSC overload or link block
Abbreviated Name
MscFlcMaxLevel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the highest flow control level when MSCs
are overloaded or signaling points are congested.
Instance
BSC
Related FG
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-36
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set based on the settings of the FUC-based
flow control bitmap. If this parameter is set to a larger value, the

flow control level allowed in the FUC-based flow control triggered by
MSC overload or signaling point congestion is high.
The default parameter value is set based on the default FUC
Reason
threshold. The value "6" can put about half traffic under flow control.
If the system load still cannot be reduced, the problem possibly
lies in the system capacity. In this case, it is recommended that
non-FUC-based flow control be used.
Change take effect
Yes
Access
Read/Write
OMC Access path
N/A
2.1.29 Start limit of system message method for CPU overload

Full Name
Start limit of system message method for CPU overload
Abbreviated Name
CpuSysInfoCtlCpu
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold of the CMP's CPU usage

that triggers the system messaging-based flow control when being
exceeded. This means that if the CPU usage exceeds the threshold
specified by this parameter and the CpuSysInfoFlc parameter is set
to "1 (Yes)", the system messaging-based flow control is enabled.
2-37
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
0..100
Unit
Default Value
65
Related Parameters
CPUSysInfoFlc
This parameter is valid only when the CPUSysInfoFlc switch is
Parameters
enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is valid when the system messaging-based flow
control is enabled. This parameter is set to the default value in most

cases. If this parameter is set to a larger value, the CPU usage
should reach a higher value to trigger the flow control. A too large
value is not conducive to lowering the congestion in the high-load
case. If this parameter is set to a smaller value, the flow control is
triggered too early, which affects the proper operation of services.
The default parameter value is set because for the CMP, the CPU
Reason
usage of 65% or more is considered to be high. In this case, flow

control can be initiated for some services to avoid higher CPU
usage.
Change take effect
Yes
Access
Read/Write
OMC Access path
N/A
2.1.30 Start limit of FUC flow control for CPU overload

Full Name
Start limit of FUC flow control for CPU overload
2-38
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
CpuFucCtlCpu
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold of the CMP's CPU usage

that triggers the FUC-based flow control when being exceeded.
This means that if the CPU usage exceeds the threshold specified
by this parameter and the CpuFucFlc parameter is set to "1 (Yes)",
the FUC-based flow control is enabled.
Instance
BSC
Related FG
0..100
Unit
Default Value
80
Related Parameters
CPUFucFlc
This parameter is valid only when the CPUFucFlc switch is enabled.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is valid when the FUC-based flow control is enabled.
This parameter is set to the default value in most cases. If this

parameter is set to a larger value, the CPU usage should reach
a higher value to trigger the flow control. A too large value is not
conducive to lowering the congestion in the high-load case. If this
parameter is set to a smaller value, the flow control is triggered too
early, which affects the proper operation of services.
Reason

control can be initiated to avoid higher CPU usage.
Change take effect
Yes
Access
Read/Write
2-39
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path
V6.50.103/V6.30.103
N/A
2.1.31 B2 support AMR

Full Name
B2 support AMR
Abbreviated Name
V2TruSupportAmr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the BTS 2.0 carrier supports the
AMR speech algorithm and whether the services on this carrier can
use AMR speech coding.
Instance
BSC
Related FG
N/A
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the actual carrier frequency situation.
In most cases, the EDGE carrier frequencies support AMR.
The default parameter value is set because only part of the BTS2.0
Reason
carrier frequencies support AMR.
Change take effect
No
2-40
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
N/A
2.1.32 If paging flow control due to high CPU

Full Name
If paging flow control due to high CPU
Abbreviated Name
cpupagingflc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable paging-based flow

control when the CPU usage of the CMP increases to the threshold
of the paging-based flow control.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-41
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter CpuSysInfoFlc, CpuFucFlc and cpupagingflc are valid
only for flow control over the CPU. System messaging-based,

FUC-based and paging-based flow control methods can be applied
to flow control over the CPU at the same time. In addition, this
function takes effect only after the paging message sent by CN
contains the eMLPP priority of a subscriber.
The default parameter value is set because it is recommended that
Reason
the FUC-based flow control be preferred.
Change take effect
Yes
Access
Read/Write
OMC Access path
N/A
2.1.33 CPU threshold of paging flow control

Full Name
CPU threshold of paging flow control
Abbreviated Name
CpuPagingCtlCpu
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold of the CMP's CPU usage that
triggers the paging-based flow control when being exceeded. This
means that if the CPU usage exceeds the threshold specified by this
parameter and the cpupagingflc parameter is set to "1 (Yes)", the
paging-based flow control is enabled.
Instance
BSC
Related FG
0..100
Unit
Default Value
80
2-42
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is valid when the cpupagingflc switch is enabled.
This parameter is set to the default value in most cases. If this

parameter is set to a larger value, the CPU usage should reach
a higher value to trigger the flow control. A too large value is not
conducive to lowering the congestion in the high-load case. If this
parameter is set to a smaller value, the flow control is triggered too
early, which affects the proper operation of services.
Reason

control can be initiated to avoid higher CPU usage.
Change take effect
Yes
Access
Read/Write
OMC Access path
N/A
2.1.34 Radio pre-access procedure switch

Full Name
Radio pre-access procedure switch
Abbreviated Name
RadioPreAccsFlag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-43
SJ-20140527134815-013|2015-03-10(R1.1)
Description

control on the radio resources of a 3G neighbor cell under the
current mode during 2G-to-3G handover decision in the dual-mode
case. If pre-admission control fails, this cell is not selected as the
target cell for handover to accelerate successful handover and
reduce abnormal procedures.
Instance
BSC
Related FG

0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to the default value. In the dual-mode
case, this function can be enabled when the platform loads are
synchronized properly.
The default parameter value is set because this function is used
Reason
only in the dual-mode case.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2-44
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.35 Transport Pre-Access Flag

Full Name
Transport Pre-Access Flag
Abbreviated Name
TransPreAccsFlag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

control on the transmission resources of a 3G neighbor cell
under the current mode during 2G-to-3G handover decision in
the dual-mode case. If pre-admission control fails, this cell is not
selected as the target cell for handover to accelerate successful
handover and reduce abnormal procedures.
Instance
BSC
Related FG

0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to the default value. In the dual-mode
case, this function can be enabled when the platform loads are
synchronized properly.
Reason
only in the dual-mode case.
Change take effect
No
2-45
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
N/A
2.1.36 The switch of sending Immediate assign message and radio

channel activating synchronously
Full Name
The switch of sending Immediate assign message and radio channel

activating synchronously
Abbreviated Name
SendImmAss
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable the simultaneous

delivery of the immediate assignment command and the channel
activation command during immediate assignment.
According to the normal immediate assignment procedure, the
immediate assignment command is sent after the channel activation
command and the channel activation acknowledgement command.
Because transmission over the Abis interface through a satellite
leads to a relatively long delay, the immediate assignment may fail
due to the timeout on the MS side after the channel activation and
acknowledgement. The simultaneous delivery of the immediate
assignment command and the channel activation command ensures
the timely sending of the immediate assignment command and the
success of immediate assignment when the transmission delay over
the Abis interface is long.
Instance
BSC
Related FG
N/A
0: Off
1: On
Unit
N/A
Default Value
2-46
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled when a high-delay transmission
mode, for example, satellite, is used over the Abis interface and the
success rate of assignment is low.
Reason
only in special cases.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.37 FO report for CS

Full Name
FO report for CS
Abbreviated Name
FOOption1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to report the CS service failure

observation. Failure observation is a kind of special signaling used
by R&D personnel to analyze service failure causes.
Instance
BSC
Related FG
N/A
2-47
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
This function is used only for fault location. This function is disabled
by default. .
Reason
only for fault location.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.38 FO report for PS

Full Name
FO report for PS
Abbreviated Name
FOOption2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-48
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines whether to report the PS service failure

Instance
BSC
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
by default. .
Reason
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.39 FO report for DBS

Full Name
FO report for DBS
Abbreviated Name
FOOption3
Managed Object
2-49
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to report the DBS failure

Instance
BSC
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
by default. .
Reason
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.40 Inter BSC handover out on SDCCH permitted

2-50
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Inter BSC handover out on SDCCH permitted
Abbreviated Name
InterBscSdHoOut
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether inter-BSC handover on the

SDCCH channel is allowed.
If this parameter is set to "1 (Yes)", an external cell can be selected
as the target cell for handover on SDCCH. If this parameter is set
to "0 (No)", an external cell cannot be selected as the target cell
for handover on SDCCH.
Instance
BSC
Related FG
ZGO-02-02-004 SDCCH/SDCCH Handover
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
This parameter is set to "0 (No)" in most cases. When the SDCCH
handover between neighbor cells of two BSCs is required (for

example, in the expressway case) and the MSC can support the
SDCCH handover very well, this parameter can be set to "1 (Yes)".
The default value is set to "No" because the MSC may fail to handle
Reason
handovers on the SDCCH properly due to long processing time

required for inter-BSC handovers.
Change take effect
No
2-51
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
N/A
2.1.41 The switch of connection and radio channel activating

synchronization
Full Name
The switch of connection and radio channel activating

synchronization
Abbreviated Name
CallDelayCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable the simultaneous

delivery of the connection and channel activation commands.
When E1 is used for transmission over the Abis interface, it takes
relatively long time for LAPD packeting, which leads to a larger
message interaction delay. If the BSC sends the connection
command and the channel activation command simultaneously, the
message interaction delay can be reduced. For the IP mode, the
delay is not reduced too much. It is suggested that this function be
enabled when a satellite is used for transmission.
Instance
BSC
Related FG
ZGO-05-01-001 Abis Interface over Satellite
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-52
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
Yes
When E1 is used for transmission over the Abis interface, it is
recommended that this function be enabled to shorten the message

interaction delay and the radio access delay (by about 100 ms),
especially in the case of satellite transmission over the Abis
interface. In the case of IP transmission over the Abis interface,
there is no significant effect on delay optimization.
The default parameter value is set because the delay over the Abis
Reason
interface does not need to be reduced.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.42 Use BER to average quality

Full Name
Use BER to average quality
Abbreviated Name
RQavgUseBer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to use BER to calculate the

average quality.
If this parameter is set to "1 (Yes)", the RQ degree should be
converted to BER before the average of the measurement report
is calculated. If this parameter is set to "0 (No)", the RQ degree is
directly used to calculate the average.
Instance
BSC
Related FG
ZGB-02-02-001 Basic Handover
2-53
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The quality level averaged by error bit rates converted from RQ
levels is different from that directly averaged by RQ levels. It is

suggested disabling this function when the success rate of handover
is normal.
The default parameter value is set because the use of the RQ value
Reason
to calculate the average quality is widely used in the network.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.43 Check IMSI when access

Full Name
Check IMSI when access
Abbreviated Name
CheckImsiWhenAccess
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-54
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines whether to check IMSI during access.

When an MS accesses the network after a call drop, if it carries the
IMSI in the initial access message, the BSC may detect an IMSI
conflict and then sends CLEAR REQ to the MSC. In this case, a call
drop is recorded both over the A interface and inside the BSC. If
the BSC does not check the IMSI conflict, it does not send CLEAR
REQ to the MSC, nor does it record a call drop. In this case, the
MSC initiates the release procedure after it detects the IMSI conflict.
This reduces call drop records.
Instance
BSC
Related FG
ZGO-01-01-005 Call Re-establishment
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter can be set to "0 (No)" to minimize the call drop rate.
The default parameter value is set because IMSI check facilitates
Reason
resource release.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2-55
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.44 Include BTS power in MR

Full Name
Include BTS power in MR
Abbreviated Name
MrIncludeBtsPwr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to include the BTS power field

in the MR data.
Instance
BSC
Related FG
ZGO-06-01-005 Measurement Report (MR)Data Report
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to "1 (Yes)" when the operator requires
that the MR should provide the BTS power or downlink path loss
and the MR analyzer supports this function.
The default parameter value is set for better compatibility. In this
Reason
way, MR data can be recognized even if the MR decode software

does not support this function. Not reporting the BTS power can
also reduce the MR data traffic.
Change take effect
No
Access
Read/Write
2-56
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path
N/A
2.1.45 Measurement Result Recording Interval in MSC Invoke Trace

Full Name
Measurement Result Recording Interval in MSC Invoke Trace
Abbreviated Name
MITMRRecInt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the number of measurement reports

received over the Abis interface that triggers measurement report
sending when tracing tasks are invoked. This means that one
measurement report record is sent when the number of received
measurement reports reaches the parameter value.
Instance
BSC
Related FG
N/A
1..60
Unit
N/A
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When the system load is low, this parameter can be set to a smaller
value to record more measurement reports.
The default parameter value is set to "60". In this way, not too many
Reason
measurement reports are sent to avoid too high usage of the CPU,
communication capacity and storage space. The value "60" can
also reflect the radio signal situation.
2-57
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.46 Preprocessed Measurement Result Recording Interval in

MSC Invoke Trace
Full Name
Preprocessed Measurement Result Recording Interval in MSC

Invoke Trace
Abbreviated Name
MITPrepMRRecInt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the number of preprocessing measurement

reports received over the Abis interface that triggers preprocessing
measurement report sending when tracing tasks are invoked. This
means that one preprocessing measurement report record is sent
when the number of received preprocessing measurement reports
reaches the parameter value.
Instance
BSC
Related FG
N/A
1..60
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-58
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
When the system load is low, this parameter can be set to a smaller
value to record more measurement reports.
The default parameter value is set to "15". In this way, not too many
Reason
measurement reports are sent to avoid too high usage of the CPU,
communication capacity and storage space. The value "15" can
also reflect the radio signal situation.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.47 Enhanced and Preprocessed MR report

Full Name
Enhanced and Preprocessed MR report
Abbreviated Name
EnhanAndPrepMrRpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether enhanced and preprocessed

MRs are reported. If the parameter value is set to "Yes", each
measurement report contains a TRACEID and a number in
milliseconds.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
2-59
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
MrRptEnable
This parameter is valid only when the MrRptEnable parameter is
Parameters
set to "1 (Yes)".
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled when preprocessed or enhanced
MRs are used and the MR analysis software supports the analysis
of these MRs.
The default value is set to "No", meaning that the reporting of
Reason
enhanced and preprocessed MRs is disabled by default. It can be

set to "Yes" when it is required to report enhanced and preprocessed
MRs and the MR analysis software supports the analysis of such
MRs.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.48 Preferred speech version for FR

Full Name
Preferred speech version for FR
Abbreviated Name
preferSpeechVerFr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-60
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies the preferred full-rate speech version when

the CS channel allocation policy is implemented. Full rate version 1
refers to FR, full rate version 2 refers to EFR and full rate version 3
refers to AMR.
Instance
BSC
Related FG
ZGB-01-01-001 Full Rate (FR) Speech Codec
0: Not Valid
1: Full rate speech version 1: GSM FR
2: Full rate speech version 2: GSM EFR
3: Full rate speech version 3: FR AMR
4: Full rate speech version 4: OFR AMR-WB
5: Full rate speech version 5: FR AMR-WB
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended to allow the MSC to determine
the speech version. This parameter is modified only when there

are special on-site requirements.
If the default value is modified, the speech version is selected based
on the configuration of this parameter.
Relatively, EFR has a better speech quality and better user
experience.
AMR allows adaptive coding rate conversion. Using AMR in the
case of poor channel condition, the channel coding rate can be
increased (through adding the number of redundant bits) and
the source-channel (for speech) coding rate can be reduced to
guarantee the call quality. Using AMR in the case of good channel
condition, the source-channel coding rate can be increased to
improve the speech quality.
The BSC does not specify the preferred full rate speech version. It
Reason
can be set based on the coding scheme of the MSC.
Change take effect
No
2-61
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
N/A
2.1.49 Preferred speech version for HR

Full Name
Preferred speech version for HR
Abbreviated Name
preferSpeechVerHr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the preferred half-rate speech version

when the CS channel allocation policy is implemented. Half rate
version 1 refers to HR and half rate version 3 refers to AMR HR.
Instance
BSC
Related FG
ZGO-01-01-001 Half Rate
0: Not Valid
1: Half rate speech version 1: GSM HR
3: Half rate speech version 3: HR AMR
4: Half rate speech version 4: OHR AMR-WB
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-62
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is recommended to allow the MSC to determine
the speech version. This parameter is modified only when there

are special on-site requirements.
If the default value is modified, the speech version is selected based
on the configuration of this parameter.
Relatively, AMR allows adaptive coding rate conversion. Using
AMR in the case of poor channel condition, the channel coding rate
can be increased (through adding the number of redundant bits)
and the source-channel (for speech) coding rate can be reduced to
guarantee the call quality. Using AMR in the case of good channel
condition, the source-channel coding rate can be increased to
improve the speech quality.
The BSC does not specify the preferred half rate speech version. It
Reason
can be set based on the coding scheme of the MSC.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.50 Dynamic HR support indication

Full Name
Dynamic HR support indication
Abbreviated Name
DynaHREnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the BSC supports dynamic HR.

The dynamic HR channel allocation function enables the network
to allocate full-rate or half-rate channels to MSs according to the
traffic in the cell. Allocating half-rate channels when the channels
in the cell are likely to be congested minimizes the time of possible
congestions in peak hours.
2-63
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
ZGO-03-02-005 Dynamic Half Rate Allocation
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
DynaHREnable
A full-rate channel can be converted into a half-rate channel only
Parameters
when both the BSC-level and cell-level dynamic HR switches are

enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is enabled or disabled based on the operator's
requirement. If this function is enabled, the cell load can be lowered

but the call quality of some subscribers are affected.
Reason
(Not Support)".
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.51 HR channel fragment finishing support

Full Name
HR channel fragment finishing support
Abbreviated Name
HRDfragSupport
Managed Object

2-64
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable the HR channel

defragmentation function. This function can be configured at both
the BSC and cell levels. The HR channel defragmentation function
is enabled only when both BSC- and cell-level switches are enabled
and the proportion of the idle TCH/F channels in these cells is no
more than the threshold proportion of the idle TCH/F channels in the
total available service channels in the cell.
Instance
BSC
Related FG
ZGO-03-02-004 HR Concentration
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
HoIntraEnable
HRDfragSupport

Parameters
This function is enabled only when the "BSC intracell handover

enable" in the system control parameters is enabled and both the
BSC- and cell-level HRDfragSupport switches are enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: HR channel defragmentation in
dynamic-HR-enabled cells can increase the number of FR channels,

which improves the speech quality. HR channel defragmentation
on dynamic channels can increase the number of available PS
channels. This function is enabled or disabled based on the
operator's requirement. To enable this function, the corresponding
switch in the cell parameters should also be set. If this function is
enabled, the number of intra-cell handovers increases.
Reason
(Off)".
Change take effect
No
2-65
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
N/A
2.1.52 BCCH switch allowed

Full Name
BCCH switch allowed
Abbreviated Name
CanBcchExch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the dynamic BCCH

configuration function is enabled on the BSC. The network can
dynamically configure BCCH only when this function is enabled. To
determine in which cell this function can be used, you need to check
whether this function is enabled in the corresponding cell.
Instance
BSC
Related FG
ZGO-03-04-001 Automatic BCCH Recovery
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
CanBcchExch
This function is valid only when both the BSC-level switch
Parameters
CanBcchExch and the cell-level switch CanBcchExch are enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is enabled or disabled based on actual conditions.
When this function is enabled, if the BCCH carrier is faulty, the

system automatically switches over the BCCH carrier to a normal
carrier frequency to avoid that the cell is out of service.
2-66
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
(No)".
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.53 Dynamic configuration SDCCH

Full Name
Dynamic configuration SDCCH
Abbreviated Name
CanSdcchDyn
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the dynamic SDCCH

configuration function is enabled on the BSC. The network can
dynamically configure SDCCH only when this function is enabled.
To determine in which cell this function can be used, you need to
check whether this function is enabled in the corresponding cell.
Instance
BSC
Related FG
ZGB-03-02-003 Dynamic Configuration of SDCCH
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
CanSdcchDyn
This function is valid only when both the BSC- and cell-level
Parameters
switches are enabled.
Value Type
long
2-67
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function at the BSC level is enabled or disabled based on the
operator's requirement.
When this function is enabled, if the SD channel is busy, the system
automatically converts the TCH channel to the SDCCH channel to
relieve the congestion on the SD channel. When the SD channel
becomes idle, the system automatically converts the SDCCH
channel back to the TCH channel.
Reason
(No)".
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.54 Scan SDCCH

Full Name
Scan SDCCH
Abbreviated Name
ScanSdcch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the time period for scanning idle SDCCH
channels by the network when the dynamic SDCCH configuration
function is enabled in a cell. When the dynamic SDCCH
configuration function is enabled, the network scans SDCCHs at
the period specified by this parameter to check the number of idle
SDCCHs in the cell for determining whether to convert SDCCH
back to TCHF.
2-68
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
10..1000
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. If this parameter is set to a
larger value, the scan period becomes long, which means that the
period for the SDCCH channel to be converted back to the TCH
channel becomes long after it is converted from the TCH channel.
The default parameter value is set because it is proper to scan
Reason
SDCCHs to determine whether to convert SDCCH back to TCH

every 10 seconds.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.55 Scan BCCH

Full Name
Scan BCCH
Abbreviated Name
ScanBcch
Managed Object

2-69
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the time period for scanning the availability
of the BCCH carrier frequency by the network when the dynamic
BCCH switchover function is enabled in a cell. When the dynamic
BCCH switchover function is enabled, the network scans the status
of the BCCH carrier in the cell at the period specified by this
parameter to check whether the switchover criterion is fulfilled. This
parameter reflects the network's response to a BCCH carrier failure.
Instance
BSC
Related FG
600..9000
Unit
100ms
Default Value
3000
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended and no modification is
recommended.
If this parameter is set to a larger value, faults on the BCCH carrier
cannot be detected quickly.
If this parameter is set to a smaller value, the system load is affected.
The default parameter value is set because the network can scan
Reason
and find the cell that needs a BCCH switchover within a short time
period and the system load is not affected.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2-70
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.56 BCCH starting delay

Full Name
BCCH starting delay
Abbreviated Name
BcchDelay
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the initial delay before a BCCH switchover.

The network checks the status of the BCCH carrier when the timer
times out. If a BCCH switchover is required, the network initiates
the BCCH switchover process.
Instance
BSC
Related FG
20..1800
Unit
100ms
Default Value
1200
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
recommended.
If this parameter is set to a larger value, the time for BCCH
switchover becomes long, which affects the recovery of the cell.
If this parameter is set to a smaller value, the transient interruption
of the BCCH carrier can be perceived sensitively, which causes
frequent switchovers and affects the system load and the traffic.
The default parameter value is set because a delay of 2 minutes can
Reason
avoid a BCCH conversion triggered by a TRU reset or a temporary

block.
Change take effect
No
2-71
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
N/A
2.1.57 BCCH finishing delay

Full Name
BCCH finishing delay
Abbreviated Name
ReBcchEx
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the delay before a successful BCCH

switchover. If no BTS block response is received or BTS block fails
when the timer times out, the BSC re-selects a TRX for switchover.
This timer is started when the BSC sends a block message after the
TRX for switchover is selected. This timer is started also when the
BSC sends a TRX unblock message.
This timer is stopped when the BSC receives the TRX block
response message. This timer is stopped also when the BSC
receives the TRX unblock response message.
When the timer expires, the BSC attempts to find another cell that
needs BCCH switchover and initiates the switchover.
Instance
BSC
Related FG
20..1800
Unit
100ms
Default Value
1200
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-72
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
recommended.
If this parameter is set to a larger value, the timer for waiting for a
response message from the BTS can be as long as possible. But it
is not recommended that this parameter be set to a too large value
to avoid impact on the follow-up operations.
If this parameter is set to a smaller value, the switchover may fail
because the response from the BTS is not received within this time
period.
The default parameter value is set because the BSC can receive the
Reason
success or failure response within 2 minutes after it sends a carrier

frequency block or unblock message to the BTS.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.58 SDCCH->TCH delay

Full Name
SDCCH->TCH delay
Abbreviated Name
TimeToTch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-73
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When the dynamic SDCCH configuration function is enabled in a

cell, if an SDCCH channel becomes idle again after it is dynamically
converted from a TCH channel, this parameter specifies a time
limit for the conversion from the SDCCH channel back to a TCH
channel to prevent frequent channel conversion. Within the time
limit specified by this parameter, an SDCCH channel cannot be
converted back to a TCH channel. This parameter actually indicates
a step and the formula (Step/3+1)*ScanSDCCH indicates the period
of the delay.
Instance
BSC
Related FG
0..24
Unit
N/A
Default Value
Related Parameters
ScanSDCCH
TimeToTch indicates the SDCCH-to-TCH conversion delay step.
Parameters
The length of the delay equals (TimeToTch/3+1)*ScanSDCCH.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to a larger value if the delay time
for SDCCH-to-TCH conversion is expected to be long. It is

recommended that this parameter be set to a value that is a multiple
of 3 and plus 1.
The default parameter value is set to perform SDCCH-to-TCH
Reason
conversion after two SDCCH scanning periods. This avoids frequent

conversions between SDCCH and TCH when there are enough
idle SDCCHs available.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2-74
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.59 Minimum Tch reserved for dynamic SDCCH

Full Name
Minimum Tch reserved for dynamic SDCCH
Abbreviated Name
MinTch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specified the number of idle TCH channels that

triggers a dynamic SDCCH conversion. If dynamic SD conversion
is enabled, the number of idle TCH channels in a cell and the
first sub-cell should be checked to determine a TCH-to-SDCCH
conversion. The conversion is allowed only when the number of idle
TCH channels is greater than the value specified by this parameter.
Instance
BSC
Related FG
1..64
Unit
N/A
Default Value
Related Parameters
CanSDCCHDyn
This parameter is valid only when the CanSDCCHDyn switch is
Parameters
enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended.
If this parameter is set to a larger value, the number of

TCH-to-SDCCH conversion is more. If this parameter is set to a
smaller value, the number of TCH-to-SDCCH conversion is less.
The default parameter value is set to "4". By default, the conversion
Reason
is performed only when the number of idle TCH channels is greater

than 4 to prevent the TCH service channel from congestion.
Change take effect
No
2-75
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
N/A
2.1.60 Baseband frequency hopping TRX exchange support

Full Name
Baseband frequency hopping TRX exchange support
Abbreviated Name
BHTESupp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to support automatic baseband

frequency-hopping switchover. This function is supported only when
both the BSC- and cell-level switches are enabled. When a carrier
frequency of a baseband frequency-hopping group is faulty, the
system automatically moves it out of the group, and moves it back
into the group when it is recovered from the failure.
Instance
BSC
Related FG
ZGO-04-03-004 Baseband Frequency Hopping
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
SupBBHopExChange
This function is supported in a cell only when both the BSC- and
Parameters
cell-level switches are enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-76
SJ-20140527134815-013|2015-03-10(R1.1)
This function is an auxiliary operation and maintenance function of
the baseband hopping frequency. In the system that is configured

with baseband hopping frequencies, this function prevents carrier
frequencies in all hopping frequency groups from malfunctioning
due to failures in some carrier frequencies in the baseband hopping
frequency groups.
This function is enabled in the system that uses baseband hopping
frequencies.
It is a functional switch. The default parameter value is set because
Reason
no baseband hopping frequency is available by default.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.61 Baseband resource share support

Full Name
Baseband resource share support
Abbreviated Name
BasebandShare
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BSC-level switch used to determine

whether to enable the baseband resource sharing function. This
function of a site is supported only when both the BSC- and site-level
switches of the corresponding site are enabled.
Instance
BSC
Related FG
ZGO-03-04-005 Baseband Resource Dynamic Sharing
0: Off
1: On
Unit
N/A
2-77
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
BaseBandShare
This function is supported only when both the BSC- and site-level
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Based on operator requirements, the function can be enabled if the
traffic is affected by the tidal phenomenon.
It is a feature-related switch. The default parameter value is set
Reason
to "0 (On)".
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.62 TRX Selection priority for baseband share

Full Name
TRX Selection priority for baseband share
Abbreviated Name
BBSharePri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the sequence for carrier selection during

baseband resource sharing. It is used to control the order in which
the carrier allocates baseband resources.
Instance
BSC
Related FG

2-78
SJ-20140527134815-013|2015-03-10(R1.1)
1..4
Unit
N/A
Default Value
Related Parameters
BaseBandShare
When BaseBandShare is open,this parameter isvalid
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on network operating conditions. If
the carrier priority is properly set, this parameter can be set to "1".
Otherwise, this parameter can be set to "2". If only one priority
should be used for baseband resource allocation, this parameter
can be set to "3" or "4".
The default parameter value is set to allocate baseband resources
Reason
for carriers with a high priority and a low interference band.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.63 Number of BA Ranges

Full Name
Number of BA Ranges
Abbreviated Name
rangeNum
Managed Object

3GPP Name
Number of Ranges parameter
3GPP Reference
3GPP TS 44.018
2-79
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies the number of BA ranges that can be

prioritized to be monitored when an idle MS re-selects a cell. During
cell reselection, an idle MS can monitor some specific frequency
points first. These frequency points are a collection of factors with
closed interval. This parameter determines the number of such
closed intervals. An MS uses the BA range only when the MS
powers on or when the MS loses the current cell. This information is
sent to an MS in an RIL3_RR CHANNEL RELEASE message and
stored in the SIM card of the MS.
Instance
BSC
Related FG
N/A
1..257
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the on-site wireless environment.
This parameter is set based on actual network plans and needs to
Reason
be adjusted in actual use.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2-80
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.64 BA Range Lower

Full Name
BA Range Lower
Abbreviated Name
rangeLow
Managed Object

3GPP Name
RANGEi_LOWER
3GPP Reference
3GPP TS 44.018
Description
This parameter specifies the lower threshold of the channel

number within each BA range monitored by an idle MS during cell
reselection.
Because a BA range consists of several closed intervals, this
parameter sets the lower thresholds of all closed intervals for easy
processing and storage. For a closed interval, if it upper threshold
is equal to its lower threshold, there is only one frequency point in
this closed interval.
Instance
BSC
Related FG
N/A
0..124,128..251,512..885,975..1023
Unit
N/A
Default Value
Related Parameters
rangeHigh
The value of rangeLow should be no greater than that of rangeHigh.
Parameters
Value Type
long[300]
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-81
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
N/A
2.1.65 BA Range Higher

Full Name
BA Range Higher
Abbreviated Name
rangeHigh
Managed Object

3GPP Name
RANGEi_HIGHER
3GPP Reference
3GPP TS 44.018
Description
This parameter specifies the upper threshold of the channel

number within each BA range monitored by an idle MS during cell
reselection.
Because a BA range consists of several closed intervals, this
parameter sets the upper thresholds of all closed intervals for easy
processing and storage. For a closed interval, if it upper threshold
is equal to its lower threshold, there is only one frequency point in
this closed interval.
Instance
BSC
Related FG
N/A
0..124,128..251,512..885,975..1023
Unit
N/A
Default Value
Related Parameters
rangeLow
The value of rangeLow should be no greater than that of rangeHigh.
Parameters
Value Type
long[300]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-82
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.66 If get Utran classmark information from UE

Full Name
If get Utran classmark information from UE
Abbreviated Name
GetUtranClass
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the BSC initiates a classmark

request, asking a UE to report its UtranClassmark information after
the UE is handed over from the 3G network to the 2G network.
During a 2G-to-3G handover, it is possible that the handover request
message does not contain the UtranClassmark information of the
UE or contains improper UtranClassmark information. This may
lead to failures when the UE is handed over from the 2G network to
the 3G network later due to incorrect UtranClassmark information.
If this parameter is set to "1 (Yes)", after the UE is handed over to
the BSC from an external network, the BSC initiates a classmark
request, asking the UE to report its UtranClassmark information.
Instance
BSC
Related FG
ZGO-02-03-001 GSM/TD-SCDMA Cell Reselection and CS

Handover
ZGO-02-03-002 GSM/WCDMA Cell Reselection and CS Handover
0: No
1: Yes
2-83
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function should be enabled when the success rate of 2G-to-3G
handover is lowered because the handover request sent by the

RNC contains incomplete or old information.
The default parameter value is set because the classmark request
Reason
procedure increases the system load.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.100/V6.30.100
N/A
2.1.67 IPA AMR start mode

Full Name
IPA AMR start mode
Abbreviated Name
IPAAmrStartMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-84
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies the initial AMR rate when IPA is applied.
When IPA is applied, because the ACS of the AMR speech
version is specified by the MSC, the initial rate cannot be precisely
determined. For this reason, the default rate or the maximum rate is
used as the initial rate, and this applies when ACS is a rate set.
If this parameter is set to "0", the initial rate is set to the default initial
coding specified in 45.009.
When one mode is used, the corresponding rate is used as the
initial coding scheme.
When two or three modes are used, the lowest rate is used as the
When four modes are used, the second lowest rate is used as the
Instance
BSC
Related FG
ZGO-05-04-003 A over IP
0: Use the mode implicitly defined in 3GPP TS 45.009

1: Use the mode of Max rate
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set to the default value in most cases. The
maximum rate can be used as the initial rate in the case that the
radio signal of a cell is good.
When the default initial rate is used, the initial rate is a strong coding
Reason
scheme that is applicable to the cases in which the radio signal

quality is poor.
Change take effect
No
Access
Read/Write
OMC Access path
2-85
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.1.68 Send OVERLOAD message to MSC

Full Name
Send OVERLOAD message to MSC
Abbreviated Name
SendOverLoadToMSC
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to send an OVERLOAD

message to the MSC.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set based on the negotiation with the MSC side,
the possible follow-up behaviors and the permission of the operator.
Because the OVERLOAD message may trigger flow control on the
Reason
MSC side, the default parameter value is set to "0 (No)" if the BSC
does not negotiate with the MSC.
Change take effect
No
2-86
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
V6.50.100/V6.30.100
N/A
2.1.69 Use Load of Subcell1 as Load of Cell

Full Name
Use Load of Subcell1 as Load of Cell
Abbreviated Name
UseSC1Load
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If this parameter is set to 1 (yes), the load of the first subcell is used
as the whole cell load, and applied for neighbor cell sorting, traffic
handover decision.
If this parameter is set to 0 (No), the whole cell load is used,
including the first and second subcell.
Instance
BSC
Related FG
ZGO-04-02-005 Co-BCCH
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to 0 if there are sufficient channels in
subcell 1 or the coverage of subcell 2 is good.
2-87
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is set to 1,which means to avoid handover to a
Reason
cell whose first subcells is busy. Channels in the second subcell

are sufficient, while channels in the first subcell are insufficient, so
the entire cell load is not high.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.100/V6.30.100
N/A
2.1.70 Enough MS MR For Connection Failure After Handover

Full Name
Enough MS MR For Connection Failure After Handover
Abbreviated Name
MrCountForRlt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Upon receiving the Handover Complete message from the MS, the
BSC starts counting the MRs with L3 messages. If the count of MRs
with L3 messages is not greater than the value of this parameter
when the BSC receives the Connection Failure message, a call
drop occurs, and either of the following two counters is incremented
according to the source cell of the handover:
Counter 1: Number of few MS MR received before connection
failure after handover from adjacent cell
Counter 2: Number of few MS MR received before connection
failure after handover from adjacent 3G cell
Instance
BSC
Related FG
N/A
0..10
Unit
N/A
Default Value
3
2-88
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In general, this value does not need to be modified. When you use
signaling trace to check call drop

and collect the related statistics, you can modify this parameter.
The default value is 3, which means that the call drop occurs
Reason
immediately after handover.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.100/V6.30.100
N/A
2.1.71 Ts Block Alarm Switch

Full Name
Ts Block Alarm Switch
Abbreviated Name
TsBlockAlarmSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch for reporting the air interface timeslot

blocking alarm.
Instance
BSC
Related FG
ZGB-06-01-005 BSC Mornitor Functions
2-89
SJ-20140527134815-013|2015-03-10(R1.1)
0: close
1: open
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If this alarm is not required by the network, this parameter must
be disabled.
This parameter enables or disables the alarm function. By default, it
Reason
is disabled.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.72 BVC Block Alarm Switch

Full Name
BVC Block Alarm Switch
Abbreviated Name
BVCAlarmSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter is the switch for reporting the BVC manual blocking
alarm.
2-90
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
ZGO-02-03-021 GSM/LTE Load Balancing
0: close
1: open
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If this alarm is not required by the network, this parameter must
be disabled.
This parameter enables or disables the alarm function. By default, it
Reason
is disabled.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.73 Allow assign according first measurement report when use

cobcch
Full Name
Allow assign according first measurement report when use cobcch
Abbreviated Name
CoBcchAssByOneMr
Managed Object

3GPP Name
N/A
2-91
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter determines whether to directly assign a channel in

subcell 2 to an MS in accordance with the first measurement report.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In case of Co-BCCH, this parameter can be set to "Yes" if it is
expected to directly assign a channel in subcell 2 to an MS. The

assignment success rate must be observed.
This feature is not necessary if it is not specially required to direct
Reason
assign a channel in subcell 2 to an MS because the MS can

be handed over to subcell 2 through a subsequent inter-subcell
handover.
Change take effect
No
Access
Read/Write
OMC Access path
N/A
2.1.74 Immediate assignment repeat

Full Name
Immediate assignment repeat

2-92
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
ImmAssRep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether retransmission of the immediate

assignment message is supported. It determines the maximum
number of times that the immediate assignment message is
retransmitted. The value 0 means that the retransmission is not
supported. The value 1 means that the immediate assignment
message can be retransmitted once.
Instance
BSC
Related FG
N/A
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The retransmission of immediate assignment message has a
positive impact on the immediate assignment success rate.
The default value is set to 1.
Reason
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.103/V6.30.103
N/A
2-93
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.75 Switch of TRAU frame synchronized monitor

Full Name
Switch of TRAU frame synchronized monitor
Abbreviated Name
trauFraSynSupp
Managed Object

3GPP Name
3GPP TS 48.060,3GPP TS 48.061
3GPP Reference
N/A
Description
This parameter determines whether a notification is reported when

the loss of TRAU frame synchronization persists for a certain time
period.
Instance
BSC
Related FG
ZGO-06-01-018 Silent Call Detection
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
TuTrauSyn
The TRAU frame synchronization timer takes effect only when the
Parameters
notification reporting feature is enabled for the loss of TRAU frame

synchronization.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter can be set to "Yes" if the information about the loss
of TRAU frame synchronization is required.
This parameter is a feature switch. By default, it is disabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path
2-94
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.101/V6.30.101
N/A
2.1.76 Delay protection

Full Name
Delay protection
Abbreviated Name
MaxDelay
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In case of dynamic BCCH switchover or SDCCH conversion, the

BTS completes the corresponding configuration and sends an ACK
or NACK response when the switchover or conversion conditions
are met. This parameter is a delay timer that determines the waiting
time before the BSC receives the ACK or NACK response from the
BTS. If no response from the BTS is received at expiry of this timer,
the switchover or conversion procedure is re-initiated.
Instance
Related FG
BSC
1200..2400
Unit
100ms
Default Value
1800
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-95
SJ-20140527134815-013|2015-03-10(R1.1)
If no ACK or NACK message is received from the BTS in three
Reason
minutes, the BSC determines that an exception occurs in the

channel conversion and the initial state must be resumed.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.103/V6.30.103
N/A
2.1.77 Busy threshold of sub cell

Full Name
Busy threshold of sub cell
Abbreviated Name
resLimitMove
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The channel rearrangement and migration feature is implemented

through intra-cell handover, during which more channels in the
cell may be temporarily occupies. This procedure can only be
performed when the cell is not very busy, meaning the proportion of
occupied channels in the cell does not exceed a certain threshold.
This parameter specifies the threshold that determines whether the
channel rearrangement and migration is allowed in the cell.
Instance
BSC
Related FG
ZGO-03-02-011 Channel Repacking
40..100
Unit
N/A
Default Value
80
Related Parameters
N/A
N/A
Parameters
2-96
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The parameter can be adjusted to a smaller value when frequent
channel rearrangement and migration is not expected. This

parameter can be adjusted to a larger value when frequent channel
rearrangement and migration is allowed.
Generally, channel rearrangement and migration is allowed in a
Reason
cell and has little impact on the cell load when less than 80% of
channels are occupied in the cell.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.78 Support of SON Transfer Application

Full Name
Support of SON Transfer Application
Abbreviated Name
SONTrans
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BSC supports SON transfer

applications. The SON transfer application is implemented by an
RIM procedure. Therefore, the RIM support must be enabled for
the SON transfer application. When both the RIM support and the
SON transfer application are enabled, the BSC can respond to the
requests for GSM cell load from an external UTRAN or E-UTRAN
through the RIM procedure on the Gb interface, and synchronize
the load with the external network.
2-97
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
ZGO-02-03-021 GSM/LTE Load Balancing
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
RIMSupport
This parameter and the parameter RIMSupport are configured
Parameters
separately. When the SON transfer application is required, both

parameters must be set to "Yes". The SON transfer application is
unavailable if the RIM support is not enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter must be set to enable the SON transfer application
when the GSM system is required to provide load to another system

supporting a different RAT. It is a parameter used for interconnection
with the CN, in which the SGSN must support the SON transfer
application too.
The SON transfer application is disabled by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.79 Circuit data handover control

Full Name
Circuit data handover control
Abbreviated Name
CSDATAHOControl
2-98
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether handover is allowed in case

of CS data service.
Instance
BSC
Related FG
ZGB-01-03-002 Data Traffic Channels
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
GHandoverControl.CSDATAHOControl
The handover of CS data service is allowed only when the handover
Parameters
feature is enabled at the same time.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the handover of CS data service results in service damage, this
parameter can be set to forbid handover in case of CS data service.
The handover of CS data service is allowed in normal cases.
Reason
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.80 Cell Bar when A break

2-99
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Cell Bar when A break
Abbreviated Name
CellSeleBarADown
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the affected cell notifies the

related MS that the cell is barred when the A interface connection is
broken. This notification helps the MS to decide a cell selection to
another network, such as 3G or 4G network.
Instance
BSC
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This function can be enabled according to the actual requirement.
This function is disabled unless specially required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2-100
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.81 Send Paging CS on CCCH or not when PS instance exists

Full Name
Send Paging CS on CCCH or not when PS instance exists
Abbreviated Name
SendPacchCcch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A CS paging message is received in the PS service, if the paging

coordination function is enabled, the system sends a Paging CS
message on the PACCH channel. This parameter specifies whether
to send a Paging CS message also on the CCCH channel. If the
paging coordination function is disabled, this parameter specifies
whether to send a Paging CS message on the CCCH channel when
a CS paging message is received in the PS service.
0: Does not send a Paging CS message on the CCCH channel.
1: Sends a Paging CS message on the CCCH channel.
Instance
BSC
Related FG
ZGO-02-01-001 Paging Coordination
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The switch, if enabled, will improve the CS paging success rate but
also bring more wireless interface messages. Whether it should be

enabled depends on both customer need and network capability.
By default, this function switch is disabled.
Reason
Change take effect
No
2-101
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.82 If support mute call detect

Full Name
If support mute call detect
Abbreviated Name
MuteCallDetSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables mute call (one-way audio)

detection.If this function is enabled, the user plane will detect mute
calls and report necessary information to the back-end to facilitate
fault location.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-102
SJ-20140527134815-013|2015-03-10(R1.1)
This function can be enabled where complaints about one-way audio
are many so as to locate the fault by analyzing related notifications.

This function supports IP as the Abis interface is concerned. While
for the A interface, it supports both IP and E1.
Normally, the function switch is disabled. It is enabled when
Reason
problems of the user plane needs to be checked.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.83 Reassign enable

Full Name
Reassign enable
Abbreviated Name
ReAssignEnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables wireless reassignment for the

BSC.
Instance
BSC
Related FG
ZGO-01-01-006 TCH Re-assignment
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-103
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled if a very high assignment success rate
is expected on the customer site.
This parameter is disabled by default. It is enabled only when
Reason
it is necessary for this function to improve the success rate of

assignment.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.84 Max times of reassign

Full Name
Max times of reassign
Abbreviated Name
ReAssignMax
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the maximum retry number for terminal

access by using a reassignment (normal assignment) or handover
(directed retry) command when the BSC receives a reassignment
failure message during a reassignment.
Instance
BSC
Related FG
1..5
Unit
N/A
2-104
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the assignment success rate is still not high enough to meet
customer's need after the reassignment function is enabled on the

radio side, raise the value of ReAssignMax.
This parameter is disabled in most cases. When it is enabled, the
Reason
reassignment process is tried once by default. If the success rate

of reassignment is not high enough, the maximum retry attempts
should be increased.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.85 Reassign level threshold

Full Name
Reassign level threshold
Abbreviated Name
ReAssignLevThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-105
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies the level decision threshold for intra-cell

directed retry during reassignment. When the level of an adjacent
cell is higher than that of the serving cell and reaches the threshold,
the intra-cell directed retry applies.
Instance
BSC
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value should not be modified in normal cases. It can be
turned lower only if the level of a neighbor cell is no smaller than

the local cell's level but the difference is smaller than the default
value, so that there will be neighbor cells meeting the requirement
of intra-cell directed retry. If the threshold is too big or the neighbor
cell's level is lower than the serving cell's level, then there will not be
any neighbor cell meeting the requirement of intra-cell directed retry,
and in this case, no intra-cell directed retry will be performed during
the reassignment process on the radio side but the reassignment of
the serving cell will be performed directly instead.
The intra-cell directed retry is given priority in a wireless
Reason
reassignment process. The level of a neighbor cell should be higher

than that of the serving cell. If the threshold is too high, there may
be no neighbor cell qualified for intra-cell directed retry. If the
threshold takes the default value, normally there will be qualified
neighbor cells.
Change take effect
No
Access
Read/Write
OMC Access path
2-106
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.101/V6.30.101
N/A
2.1.86 whether using Frequency List describe channel frequency

hopping of assignment command
Full Name
whether using Frequency List describe channel frequency hopping

of assignment command
Abbreviated Name
AssUseFreqList
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When constructing an assignment command, the system fills in

"MobileAllocationAT" or "FreqListAT" according the status of the
AssUseFreqList switch if the channel type is frequency hopping
system.If the value of AssUseFreqList is 1, the system fills in
"FreqListAT". Otherwise, the system fills in "MobileAllocationAT".
Instance
BSC
Related FG
N/A
0: using mobile allocation, after time

1: using frequency list, after time
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If there is not a large difference between the maximum and minimum
BSC hopping frequencies, the use of FreqListAT can effectively

shorten the assignment commands and improve the MOS value.
But this coding mode need be compatible with the MS first.
2-107
SJ-20140527134815-013|2015-03-10(R1.1)
FREQLIST is not used since some terminals are not compatible
Reason
with the FreqListAT cell.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.87 P value of MUTE SAIC MS capability detection

Full Name
P value of MUTE SAIC MS capability detection
Abbreviated Name
MuteSaicDetNumP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the capability detection times P of MUTE

SAIC MSs.
For a model of MS, if P out of N tests of MUTE SAIC shows the
same capability, then the MS is deemed to have this capability.
Instance
BSC
Related FG
ZGO-04-05-003 VAMOS Pairing and De-Pairing
10..65535
Unit
N/A
Default Value
800
Related Parameters
MuteSaicDetNumN
MuteSaicDetNumN>=MuteSaicDetNumP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-108
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
If the value is too small, the condition of judgment will be easily met
and the MS capability will be easily misjudged.

If the value is too big, the condition of judgment will be hard to meet
and the MUTE SAIC MS will be hard to identify.
The value of 800 is recommended to ensure accurate and quick
Reason
detection.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.88 N value of MUTE SAIC MS capability detection

Full Name
N value of MUTE SAIC MS capability detection
Abbreviated Name
MuteSaicDetNumN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the capability detection times N of MUTE

SAIC MSs.
For a model of MS, if P out of N tests of MUTE SAIC shows the
same capability, then the MS is deemed to have this capability.
Instance
BSC
Related FG
10..65535
Unit
N/A
Default Value
1000
Related Parameters
MuteSaicDetNumP
2-109
SJ-20140527134815-013|2015-03-10(R1.1)
MuteSaicDetNumN>=MuteSaicDetNumP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too small, there will not be enough samples to make
accurate judgment;
If the value is too large, the system performance will be affected due
to interferences as it takes long to make a judgment.
Reason
detection.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.89 P value of SAIC AFC MS capability detection

Full Name
P value of SAIC AFC MS capability detection
Abbreviated Name
SaicAfcDetNumP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the capability detection times P of SAIC

AFC MSs.
For a model of MS, if P out of N tests of SAIC AFC shows the same
capability, then the MS is deemed to have this capability.
Instance
BSC
Related FG

2-110
SJ-20140527134815-013|2015-03-10(R1.1)
10..65535
Unit
N/A
Default Value
800
Related Parameters
SaicAfcDetNumN
SaicAfcDetNumN>=SaicAfcDetNumP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too small, the condition of judgment will be easily met
and the MS capability will be easily misjudged.

If the value is too big, the condition of judgment will be hard to meet
and the SAIC AFC MS will be hard to identify.
Reason
detection.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.90 N value of SAIC AFC MS capability detection

Full Name
N value of SAIC AFC MS capability detection
Abbreviated Name
SaicAfcDetNumN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-111
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the capability detection times N of SAIC

AFC MSs.
For a model of MS, if P out of N tests of SAIC AFC shows the same
capability, then the MS is deemed to have this capability.
Instance
BSC
Related FG
10..65535
Unit
N/A
Default Value
1000
Related Parameters
SaicAfcDetNumP
SaicAfcDetNumN>=SaicAfcDetNumP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate judgment;
If the value is too large, the system performance will be affected due
to interferences as it takes long to make a judgment.
Reason
detection.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.101/V6.30.101
N/A
2.1.91 EMI information on single-user report

Full Name
EMI information on single-user report
Abbreviated Name
EMIReport
2-112
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter controls whether the MOS calculation result is

reported.
Instance
BSC
Related FG
0..2
0: No report EMI information
1: Report base EMI information
2: Report detail EMI information
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is disabled by default. To query the detailed MOS
calculation procedure, set this parameter to 2. To query the MOS

result only, set this parameter to 1.
The MOS calculation function for speech quality is disabled by
Reason
default, so the MOS calculation result is also not reported by default.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.201/V6.30.201
N/A
2-113
SJ-20140527134815-013|2015-03-10(R1.1)
2.1.92 Support Mocn

Full Name
Support Mocn
Abbreviated Name
MocnSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BCC level switch that controls whether
to support MOCN.
Instance
BSC
Related FG
ZGO-03-07-006 Network Sharing Based on MOCN
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
R_MPLMN.MSCID,R_MPLMN.SGSNID
R_MPLMN.MocnAreaId
If R_BSC. MocnSupport is "Yes", the MSC and SGSN can only be
Parameters
configured to an operator.
If MocnSupport is 0, R_LAIMOCN.MocnAreaId only can be
configured to 0.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is enabled as operators required.
This parameter is only used in some special networking scenarios.
Reason
Change take effect
Yes
Access
Read/Write
2-114
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path
V6.50.201/V6.30.201
N/A
2.1.93 Ask IMEI When Cipher

Full Name
Ask IMEI When Cipher
Abbreviated Name
AskImeiWhenCipher
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to carry the

IMEI in encryption. If this parameter is set to 1, the BSC will inform
the MS to carry the IMEI for tracing, even if this is not required by
MSC.
Instance
BSC
Related FG
ZGO-04-05-007 Detection of Mute-SAIC Mobile Stations

ZGO-04-05-008 Detection of SAIC Mobile Stations with AFC
Problem
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the MSC does not require the MS to carry IMEI in the encryption
command but IMEI tracing is needed, you can enable this parameter.
2-115
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is only enabled when IMEI tracing is needed.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path
V6.50.201/V6.30.201
N/A
2.1.94 Max ta and measure report times in LCS

Full Name
Max ta and measure report times in LCS
Abbreviated Name
LcsMaxTaRequestNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the maximum number of TA and

measurement report requests when there is no measurement report
information available in a location service TA response.
Instance
BSC
Related FG
ZGF05-25-022 LCS with CGI+TA
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-116
SJ-20140527134815-013|2015-03-10(R1.1)
Use 0 if the location center does not require that the TA response
must carry a measurement report. Use 1-3 otherwise.
Application is made once by default with an interval of 1 second.
Reason
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.103/V6.30.103
N/A
2.1.95 Use Reserved Channel

Full Name
Use Reserved Channel
Abbreviated Name
USERESERVEDCHAN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a TS-based reserved channel is

valid. If it is set to 0, the parameter IsRsv is invalid.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
GTs.Isrsv
IsRsv works only if USERESERVEDCHAN=1.
Parameters
Value Type
long
Parameter Type
2-117
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
Yes
Disabled by default. It can be enabled to designate channel
reservation for high-priority users.
It is a special functional switch, disabled by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.103/V6.30.103
N/A
2.1.96 Include Priority in Paging

Full Name
Include Priority in Paging
Abbreviated Name
PagIncludePriority
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the paging message over the Um

interface contains priority information. When the paging message
delivered by the CN carries eMLPP priority information, you can
set whether the paging message over the Um interface contains
the eMLPP information.
Instance
BSC
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
2-118
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
By default, it is disabled. It can be enabled as operators required.
The default value is set to 0. It means that the paging message
Reason
without priority information can save bandwidth and improve the

paging delivery capability.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.201/V6.30.201
N/A
2.1.97 BSC Sequence

Full Name
BSC Sequence
Abbreviated Name
GBssFunctionSeq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the identifier of a BSC. It globally identifies

a BSC.
Instance
BSC
Related FG
N/A
1..4095
2-119
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the on-site network plan.
The default parameter value is set based on the on-site network
Reason
plan.
Change take effect
Unmodifiable
No
Access
Read/Write
OMC Access path
N/A
2.1.98 Period of emergency add TRX license

Full Name
Period of emergency add TRX license
Abbreviated Name
dynEmgAddLcsPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the cell load is larger than the emergency threshold,the the
system will add trx license for this cell.This paramter is the period
for this apply.
Instance
BSC
2-120
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
N/A
50..1500
Unit
100ms
Default Value
600
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When hope emergency increased license faster, you can reduce
this parameter. If the current system load is high, hoping to reduce

the load, can increase this parameter.
When system add trx license per 60s, it does not affect the system
Reason
load.
Change take effect
No
Access
Read/Write
OMC Access path
V6.50.202/V6.30.202
ADD
2.1.99 MS capability pairing priority 1

Full Name
MS capability pairing priority 1
Abbreviated Name
MsPairPrior1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-121
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter records the MS ability pairing priority configured for

the system. The higher the rank of a pairing is, the higher the priority
of the pairing is. For example, three pairing priorities are configured:
0: Not Support, 1: SAIC pair to VAMOS II, 3: VAMOS I pair to
VAMOS II. If the MsPairPrior1 parameter is set to 1: SAIC pair
to VAMOS II, the MsPairPrior2 parameter is set to 3: VAMOS I
pair to VAMOS II, and the MsPairPrior3 parameter is set to 0: Not
Support, then, the priority sequence is: SAIC pair to VAMOS II >
VAMOS I pair to VAMOS II > Not Support. s
Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In accordance with the measurement result, an MS ability pairing
with a higher rank is set to a higher priority.
To ensure the best pairing, it is recommended that the default value
Reason
is set to 1.
Change Take Effect
No
Access
Read/Write
OMC Access path
Newly added parameter in version UR13.3
2-122
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
MsPairPrior2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

VAMOS I pair to VAMOS II > Not Support.
Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 2.
Change Take Effect
No
2-123
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-124
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
is set to 3.
Change Take Effect
No
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
2-125
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 4.
Change Take Effect
No
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-126
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 5.
Change Take Effect
No
Access
Read/Write
OMC Access path
2-127
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
MsPairPrior6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 6.
Change Take Effect
No
2-128
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-129
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
is set to 7.
Change Take Effect
No
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
2-130
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 8.
Change Take Effect
No
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior9
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-131
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 9.
Change Take Effect
No
Access
Read/Write
OMC Access path
2-132
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
MsPairPrior10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 10.
Change Take Effect
No
2-133
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior11
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
11
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-134
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
is set to 11.
Change Take Effect
No
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior12
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
12
2-135
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 12.
Change Take Effect
No
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior13
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-136
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
13
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 13.
Change Take Effect
No
Access
Read/Write
OMC Access path
2-137
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
MsPairPrior14
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
14
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 14.
Change Take Effect
No
2-138
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior15
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-139
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
is set to 15.
Change Take Effect
No
Access
Read/Write
OMC Access path

Full Name
Abbreviated Name
MsPairPrior16
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..16
Unit
N/A
Default Value
16
2-140
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
is set to 16.
Change Take Effect
No
Access
Read/Write
OMC Access path
2.2 BSS Function Timer(GBssFunctionTimer)

2.2.1 BSS Function Timer ID
Full Name
BSS Function Timer ID
Abbreviated Name
GBssFunctionTimerId
Managed Object
BSS Function Timer(GBssFunctionTimer)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a BSS function timer ID.
Instance
BSC
Related FG
N/A
2-141
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path
GUI: Managed Element->GSM Logical Configuration->Global

Information Configuration->BSS Function Timer
N/A
2.2.2 Protective time waiting for access

Full Name
Protective time waiting for access
Abbreviated Name
rmsT1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-142
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the rmsT1 timer, which records the

protection time for waiting for MS access after the channel is
activated during an assignment or a handover.
This timer is started when the target channel receives a CHL
ACITIVATION ACK message.
This timer is stopped when the MS is accessed to the network and
the target channel receives an ASSIGNMENT COM or HANDOVER
COM message.
When the timer expires, the instance on the target channel is
released.
Instance
BSC
Related FG
N/A
0..1001
Unit
100ms
Default Value
70
Related Parameters
T3107
T3103
For an intra-cell handover, the value of rmsT1(7s) should be greater
Parameters
than that of rmsT3107(6s).

For an inter-cell handover, the value of rmsT1(7s) should be greater
than that of rmsT3103(6s).
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. If this parameter is set to a
larger value, the radio resources are occupied for a long time period,
which causes the waste of resources. If this parameter is set to a
smaller value, the risk of access failure increases.
The default parameter value is set because an MS can be accessed
Reason
to the network within 7 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

2-143
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.103/V6.30.103
N/A
2.2.3 Protection time for link establishment response

Full Name
Protection time for link establishment response
Abbreviated Name
rmsT3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the T3 timer, which records the protection

time for waiting for the A-interface link establishment response.
This timer is started when the BSC sends an ESTABLISH IND
message during immediate assignment.
This timer is stopped when the BSC receives the A-interface link
establishment confirmation message.
When the timer expires, this service is released.
Instance
BSC
Related FG
N/A
30..100
Unit
100ms
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set to a larger value, the resources are occupied

for a long time period, which causes the waste of resources. If this
parameter is set to a smaller value, the risk of link establishment
failure increases.
2-144
SJ-20140527134815-013|2015-03-10(R1.1)
The default parameter value is set because an interval of 6 seconds
Reason
is enough for protection.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.4 SAPI3 link establishment time

Full Name
SAPI3 link establishment time
Abbreviated Name
rmsT6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the T6 timer, which monitors SAPI3 link

establishment.
This timer is started when the BSC receives a DTAP (SAPI=3)
message from the MSC and there is no SAPI3 links.
This timer is stopped when the BSC receives an ESTABLISH
CONFIRM message from the BTS.
When the timer expires, the BSC sends a BSSMAP SAPI"n"REJECT
message to the MSC.
Instance
BSC
Related FG
ZGB-01-03-003 Short Message Service (SMS)
10..300
Unit
100ms
Default Value
100
Related Parameters
N/A
2-145
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

parameter is set to a smaller value, the risk of link establishment
failure increases.
The default parameter value is set because the ESTABLISH
Reason
CONFIRM message can be received from the BTS within 10

seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.5 Protective time that responses external handover completion

message
Full Name
Protective time that responses external handover completion

message
Abbreviated Name
rmsT7
Managed Object

3GPP Name
T7
3GPP Reference
N/A
2-146
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the rmsT7 timer, which specifies the

protection time for waiting for the response assignment message or
the handover complete message.
This timer is started when the BSC sends a handover request.
This timer is stopped when the BSC receives an HO CMD response.
When the timer expires, the BSC performs penalty for the
corresponding external cell and ends the procedure.
Instance
BSC
Related FG
N/A
50..200
Unit
100ms
Default Value
150
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set to a larger value, a call drop may occur

because the MS has no time to select another cell for handover. If
this parameter is set to a smaller value, the MS may have no time to
receive a handover command.
The default parameter value is set because an outgoing handover
Reason
can be completed within 15 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-147
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.6 External handover protective time

Full Name
External handover protective time
Abbreviated Name
rmsT8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the rmsT8 timer, which monitors the

outgoing handover process.
This timer is started when the BSC sends an outgoing handover
command.
This timer is stopped when the BSC receives an CLEAR
CMD(handover success)or UM HO FAIL message.
When the timer expires, the service is released.
Instance
BSC
Related FG
N/A
1..1000
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. If the success rate of outgoing
handover is low, this parameter can be set to a larger value. It is not

suggested setting this parameter to a too large value because this
affects user experience.
The default parameter value is set because an outgoing handover
Reason
Change take effect
No
2-148
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.2.7 Protective time for RF channel release

Full Name
Protective time for RF channel release
Abbreviated Name
rmsT9
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the T9 timer.

This timer is started when the instance sends an RF CHANNEL
RELEASE message to the BTS during its release.
This timer is stopped when the instance receives the RF CHANNEL
RELEASE ACKNOWLEDGE response from the BTS.
When the timer expires, the service instance is released.
Instance
BSC
Related FG
N/A
10..50
Unit
100ms
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-149
SJ-20140527134815-013|2015-03-10(R1.1)
The larger the parameter value is, the longer the wait time is, and
the longer the time for service release is in exceptional cases. This
parameter is now invalid in the NMS. The value of RMST11 is set in
RMST11 of the eMLPP parameters.
The default parameter value is set because the ACK message can
Reason
be received from the BTS within 2 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.8 Starting time for oriented retry

Full Name
Starting time for oriented retry
Abbreviated Name
rmsT10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the rmsT10 timer. It indicates the time for
waiting for the start of directed retry. When there are no available
channels for assignment in a cell, this timer is started to wait for
queuing, forced handover or forced release. When the timer expires,
a directed retry process is initiated.
This timer is started when there are no available channels for
assignment in a cell.
This timer is stopped when there are available resources after
queuing, forced handover or forced release.
When the timer expires, a directed retry process is initiated.
Instance
BSC
Related FG
2-150
SJ-20140527134815-013|2015-03-10(R1.1)
50..150
Unit
100ms
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Because time should be reserved for queuing and preemption,
this parameter is set based on the time needed for queuing and
preemption.
The default parameter value is set because the queuing, forced
Reason
release or forced handover procedure can be completed within 6

seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.9 Encryption mode modification time

Full Name
Encryption mode modification time
Abbreviated Name
rmsT5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-151
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the T5 timer, which monitors the encryption

mode modification process. It indicates the time for waiting for an
MS response after the radio encryption mode is configured.
This timer is started when the BSC receives a CIPHER MODE
COMMAND message from the MSC.
This timer is stopped when the BSC receives a CIPHER MODE
COMMPLETE message from the MS.
When the timer expires, the BSC sends a BSSAP CIPHER MODE
REJECT message to the MSC.
Instance
BSC
Related FG
N/A
30..120
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

parameter is set to a smaller value, the risk of encryption failure
increases.
The default parameter value is set because the CIPHER MODE
Reason
COMPLETE message can be received from the MS within 10

seconds.
Change take effect
No
Access
Read/Write
OMC Access path

2-152
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.2.10 Mode modification process time

Full Name
Mode modification process time
Abbreviated Name
TModeModify
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the T13 timer, which monitors the BTS
and MS mode modification process. When there is no SDCCH and
FACCH is allocated, no new channel is allocated after assignment,
and mode modification is performed instead.
This timer is started when the BSC sends a MODE MODIFY
message to the BTS and a CHANNEL MODE MODIFY message
to an MS.
This timer is stopped when the BSC receives a MODE MODIFY
ACK/NACK message from the BTS and a CHANNEL MODE
MODIFY ACK message from an MS.
When the timer expires, the BSC sends a BSSMAP ASSIGNMENT
FAILURE message to the MSC.
Instance
BSC
Related FG
N/A
35..100
Unit
100ms
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to a larger value if modes fail to be
modified for many times and the number of timeout times is great.
2-153
SJ-20140527134815-013|2015-03-10(R1.1)
The default parameter value is set based on the empirical value
Reason
because the encryption mode modification process can be

completed within 6 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.11 Continue timer for mode modify

Full Name
Continue timer for mode modify
Abbreviated Name
TModeModifyConn
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer for connection delay during the
mode modification process. It indicates the time for waiting for
connection completion, including the Abis connection and the TC
connection, after a connection request is sent.
This timer is started when the BSC sends a connection request.
This timer is stopped when the BSC receives all the connection
complete messages.
When the timer expires, this service instance is cleared.
Instance
BSC
Related FG
N/A
20..70
Unit
100ms
Default Value
30
Related Parameters
N/A
2-154
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

parameter is set to a smaller value, the risk of connection failure
increases.
The default parameter value is set because all connection can be
Reason
completed within 5 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.12 First overload period of flow traffic control

Full Name
First overload period of flow traffic control
Abbreviated Name
MT11
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-155
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the mT11 timer used for traffic control when
a cell is overloaded. This timer is used together with the mT12 timer
to modify the ACCESS CONTROL parameter in cell configuration,
and the modification result is sent to an MS in a system message to
achieve traffic control. When the mT11 timer is running, the BSC
does not process the RACH Load Indication message from the BTS,
and the value of this timer must be less than that of timer mT12.
This timer is started when the BSC receives the RACH Load
Indication message from the BTS.
There is no condition for stopping this timer.
When the timer expires, the BSC resumes processing the RACH
Load Indication message from the BTS.
Instance
BSC
Related FG
30..150
Unit
100ms
Default Value
80
Related Parameters
mT12
The value of mT11 should be smaller than that of mT12.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the parameter value is, the less sensitive the cell is to the
load indication, and the more stable the flow control is. The smaller
the parameter value is, the more sensitive the cell is to the load
indication, and the more likely the flow control is to fluctuate.
The default parameter value is set because the fluctuation of
Reason
overload indication is unlikely to cause the flow control fluctuation if

new overload indication is not processed within 8 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

2-156
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.2.13 Second overload period of flow traffic control

Full Name
Second overload period of flow traffic control
Abbreviated Name
MT12
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the mT12 timer used for traffic control
when a cell is overloaded. This timer is used together with the
mT11 timer to modify the ACCESS CONTROL parameter in cell
configuration, and the modification result is sent to an MS in a
system message to achieve traffic control.
The value of this timer must be greater than that of timer mT11.
The traffic control procedure is described as follows: When the
network receives the OVERLOAD message for the first time, the
system reduces the traffic control by one level and starts timers
mT11 and mT12. During mT11, if the network receives OVERLOAD
messages, it ignores them. If the network still receives OVERLOAD
messages between mT11 and mT12, it reduces the traffic control
by level again and restarts mT11 and mT12. If the network does
not receive any OVERLOAD message after mT12, it increases the
traffic control by one level and restarts mT12. Different traffic control
levels have different proportion of traffic being rejected.
This timer is started when the RACH Load Indication message from
the BTS is received.
This timer is stopped when the RACH Load Indication message
from the BTS is received again after mT11 times out.
When the timer expires, the system reduces the traffic control by
one level.
Instance
BSC
Related FG
50..200
Unit
100ms
Default Value
150
2-157
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
mT11
The value of mT11 should be smaller than that of mT12.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the parameter value is, the more likely the flow control
is to fluctuate.
Timer mT11 is used to prevent the fluctuation of load indication.
Reason
Timer mT12 is used to adjust traffic control level after a new load
indication is received. If no load indication is received after mT12
expires, the system lowers the flow control level. The default
parameter value is set because 150 is almost twice the value of
mT11.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.14 Immediate assignment period

Full Name
Immediate assignment period
Abbreviated Name
T3101
Managed Object

3GPP Name
T3101
3GPP Reference
N/A
2-158
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the T3101 timer, which monitors the

immediate assignment procedure.
This timer is started when the BSC sends an IMMEDIATE
ASSIGNMENT COMMAND message.
This timer is stopped when the BSC receives an ESTABLISH
INDICATION message.
When the timer expires, the BSC sends an RF CHANNEL RELEASE
message to the BTS.
Instance
BSC
Related FG
N/A
10..100
Unit
100ms
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set to a larger value, the channel resources
are likely to be wasted and service congestion is more likely to

occur. If this parameter is set to a smaller value, the success rate of
immediate assignment is affected.
The default parameter value is set based on the time needed for
Reason
sending an immediate assignment message to an MS and the time

needed for the MS to access the network.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-159
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.15 Handover period of source cell

Full Name
Handover period of source cell
Abbreviated Name
T3103
Managed Object

3GPP Name
T3103
3GPP Reference
N/A
Description

intra-BSC handover procedure.
This timer is started when the BSC sends a HANDOVER
COMMAND message to an MS.
This timer is stopped when the BSC receives a HANDOVER
COMPLETE message from the MS on a new channel or a
HANDOVER FAILURE message from the MS on the old channel.
When the timer expires, the BSC sends a CLEAR REQUEST
message to the MSC with the cause CAUSE_RI_FAIL (radio
interface failure) and the new channel is released.
Instance
BSC
Related FG
N/A
0..1000
Unit
100ms
Default Value
60
Related Parameters
rmsT1
The value of T3103 should be smaller than that of rmsT1.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

occur. If this parameter is set to a smaller value, the success rate
of handover is affected.

Reason
sending a handover command to an MS and the time needed for
the MS to complete the inter-cell handover.
2-160
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.16 Assignment period

Full Name
Assignment period
Abbreviated Name
T3107
Managed Object

3GPP Name
T3107
3GPP Reference
N/A
Description

assignment procedure and the intra-cell handover procedure.
This timer is started when the BSC sends an RIL3_RR
ASSIGNMENT COMMAND message to an MS.
This timer is stopped when the BSC receives an RIL3_RR
ASSIGNMENT COMPLETE or RIL3_RR ASSIGNMENT FAILURE
message from the MS.
When the timer expires, the old and new channels are released,
related MS connections are cleared, and for the assignment
procedure, the BSC sends a BSSAP ASSIGNMENT FAILURE
message to the MSC. For the intra-cell handover procedure, the
BSC sends a CLEAR REQUEST message to the MSC with the
cause CAUSE_RI_FAIL (radio interface failure).
Instance
BSC
Related FG
N/A
0..1000
Unit
100ms
Default Value
60
2-161
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
rmsT1
The value of T3107 should be smaller than that of rmsT1.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

occur. If this parameter is set to a smaller value, the success rate of
assignment is affected.

Reason
sending an assignment command to an MS and the time needed for
the MS to complete the assignment.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.17 TCH Channel release period

Full Name
TCH Channel release period
Abbreviated Name
T3109
Managed Object

3GPP Name
T3109
3GPP Reference
N/A
2-162
SJ-20140527134815-013|2015-03-10(R1.1)
Description

channel release procedure.
This timer is started when the BSC sends an RIL3_RR CHANNEL
RELEASE message to an MS.
This timer is stopped when the BSC receives a RELEASE
INDICATION message from the BTS (when the BTS receives DISC
frames from the MS).
message to the BTS with the cause T3109OUT.
Instance
BSC
Related FG
N/A
0..1000
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set to avoid crosstalk that occurs because the
channel on the network side is released before the channel on the

MS side is not. The value of T3109 must be greater than that of
the radio link timeout timer set on the MS side. If this parameter
is set to a larger value, channel resources may be wasted, which
may cause congestion.

Reason
the MS to complete the channel release after receiving a channel
release command and the time needed for the call drop of the MS
caused by the failure of receiving a channel release command.
Change take effect
No
Access
Read/Write
OMC Access path

2-163
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.101/V6.30.101
N/A
2.2.18 TCH Channel deactivation delay

Full Name
TCH Channel deactivation delay
Abbreviated Name
T3111
Managed Object

3GPP Name
T3111
3GPP Reference
N/A
Description
This parameter indicates the rmsT3111 timer. After the radio

link layer over the Um interface is released, the BSC sets a
period of protection time rmsT3111 to ensure that the radio link is
disconnected. After rmsT3111 overflows, the BSC releases and
deactivates the radio channel.
This timer is started when the BSC receives a RELEASE
INDICATION message.
message to the BTS with the cause T3111OUT.
Instance
BSC
Related FG
N/A
1..300
Unit
100ms
Default Value
11
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-164
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is valid only for the TCH channel. If this parameter is
set to a larger value, channel resources cannot be released in time,

which may cause congestion. If this parameter is set to a smaller
value, the BTS cannot send a UA message to an MS in time, which
causes the MS not be able to release the channel rapidly.
The default value is set based on the time needed for the BTS to
Reason
send a UA message.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.2.19 RLSD message receive protection timer

Full Name
RLSD message receive protection timer
Abbreviated Name
T9101
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the T9101 timer.

This timer is started when the BSC sends a BSSAP CLEAR
COMPLETE message to the MSC.
This timer is stopped when the BSC receives an RLSD message
from the MSC.
When the timer expires, the BSC sends an RLSD message to
release the SCCP connection.
Instance
BSC
Related FG
N/A
20..50
Unit
100ms
2-165
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set to a larger value, SCCP resources are

occupied for a long time period, which causes the waste of
resources.
The default value is set because the BSC can receive a message
Reason
from the MSC within 2 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.20 Channel activation protection timer

Full Name
Channel activation protection timer
Abbreviated Name
T9103
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-166
SJ-20140527134815-013|2015-03-10(R1.1)
Description

channel activation procedure.
This timer is started when the BSC sends a CHANNEL ACTIVATION
message to the BTS.
This timer is stopped when the BSC receives a CHANNEL
ACTIVATION ACK or CAHNNEL ACTIVATION NACK message
from the BTS.
message to the BTS.
Instance
BSC
Related FG
N/A
20..50
Unit
100ms
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

parameter is set to a smaller value, the risk of channel activation
failure increases.
The default value is set because the CHANNEL ACTIVATION ACK
Reason
message can be received from the BTS within 2 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-167
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.21 MSC clear command protection timer

Full Name
MSC clear command protection timer
Abbreviated Name
T9104
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

CLEAR COMMAND message sent from the MSC.
This timer is started when the BSC sends a CLEAR REQUEST
message to the MSC.
This timer is stopped when the BSC receives a CLEAR COMMAND
message from the MSC.
When the timer expires, the CLEAR REQUEST message is resent
(for four times at the most).
Instance
BSC
Related FG
N/A
20..50
Unit
100ms
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

parameter is set to a smaller value, the signaling load is increased
due to repeated transmission of the CLEAR COMMAND messages.
The default value is set to because the CLEAR COMMAND
Reason
message can be received from the MSC within 3 seconds.
Change take effect
No
2-168
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.2.22 SCCP connection protection timer

Full Name
SCCP connection protection timer
Abbreviated Name
T9105
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the T9105 timer, which monitors the SCCP
connection procedure.
This timer is started when the BSC sends an SCCP_CONNECTION_REQ message to the MSC.
This timer is stopped when the BSC receives an SCCP_CONNECTION_CONFIRM or SCCP_CONNECTION_REFUSED message
from the MSC.
When the timer expires, the BSC sends a CHANNEL RELEASE
message to the MS.
Instance
BSC
Related FG
N/A
20..60
Unit
100ms
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-169
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No

parameter is set to a smaller value, the risk of SCCP connection
failure increases.
The default value is set because the SCCP_CONNECTION_CON-
Reason
FIRM or SCCP_CONNECTION_REFUSED message can be

received from the MSC within 3 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.23 Time of micro-micro handover delay

Full Name
Time of micro-micro handover delay
Abbreviated Name
Tmicro
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-170
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the delay timer for micro-micro handover

control. When an MS is handed over to a cell or establishes a call in
a cell, this timer is started. The MS is not allowed to be handed over
to a neighbor cell on the same layer before this timer times out. The
MS can treat neighbor cells on the same layer as candidate target
cells only after this timer times out. In this way, fast-moving MSs can
be prevented from staying in the network on the same layer.
This timer is started when a call is established.
When the timer expires, the MS is allowed to be handed over to a
neighbor cell on the same layer.
Associated timer: None.
Instance
BSC
Related FG
ZGO-02-02-001 Handover Between Macro- and Micro-cells
1..200
Unit
100ms
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the geographical position and
distribution of the cells, and the mobility behaviors of the subscribers

within the coverage. The larger the parameter value is, the longer
the time for handover restriction is.
This timer is used to reduce the handover times of a high-mobility
Reason
MS in a lower-layer network. The default value is set because it

is sure that the MS still camping on the cell after 8 seconds is not
travelling fast. To prevent the handover of the MS on the same layer,
the default value is set to 80.
Change take effect
No
Access
Read/Write
2-171
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.2.24 TFI and USF release timer

Full Name
TFI and USF release timer
Abbreviated Name
T3169
Managed Object

3GPP Name
T3169
3GPP Reference
44.06
Description
This parameter indicates timer T3169. When uplink PS data is

transmitted, if counter N3101 or N3103 overflows, the BSS starts
timer T3169. When T3169 expires, the TFI and USF resources are
released for re-use by the network.
This timer is started when counter N3101 equals N3101_MAX or
counter N3103 equals N3103_MAX.
When this timer expires, the BSC releases the TFI and USF
resources.
If counter N3101 equals N3101_MAX or counter N3103 equals
N3103_MAX, the MS does not respond to the BSC any more, and
the BSC collects the TFI and USF resources for re-use.
Instance
BSC
Related FG
N/A
0..6553
Unit
10ms
Default Value
500
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-172
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
When T3169 expires, the TFI and USF resources are released
for re-use by the network. This parameter does not need to be

set to a larger value for data transmission because TBFs will be
forcibly released when N3101 reaches N3101_MAX or N3103
reaches N3103_MAX. It is recommended to release TBF and then
re-establish a link as early as possible to avoid affecting the usage
of the TFI and USF resources. This parameter is set based on the
recommended values specified in the specification.
This default value is set based on the specification.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.2.25 TBF release timer

Full Name
TBF release timer
Abbreviated Name
T3191
Managed Object

3GPP Name
T3191
3GPP Reference
44.06
2-173
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the T3191 timer. The conditions for starting
and stopping this timer and the operations after the timer expires
are as follows:
Start/Re-start: During downlink PS data transmission, if an RLC
data block to be sent is the last downlink block, the BSC initializes
the downlink TBF release by sending an RLC data block that
contains a valid RRBP field and whose FBI (Final Block Identifier) is
"1", and the network starts or restarts timer T3191.
Stop:
When the RLC is in ACK mode, if an MS finds that all downlink
blocks have been received, the MS sends a Packet Downlink
Acknowledgement message with FAI field being "1" in the uplink
block specified by the RRBP field. If the BSC receives the Packet
Downlink Acknowledgement message before timer T3191 expires,
T3191 is stopped.
If the RLC is in NACK mode, the MS sends a Packet Control
Acknowledgement message in the uplink block specified
by the RRBP field. If the BSC receives the Packet Control
Acknowledgement message before timer T3191 expires, T3191
is stopped.
When the timer expires, the BSC releases this TBF.
Instance
BSC
Related FG
N/A
0..6553
Unit
10ms
Default Value
500
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-174
SJ-20140527134815-013|2015-03-10(R1.1)
During a downlink TBF transmission procedure, the BSC sends the
last RLC data block to the MS, sets FBI to 1, and sets an RRBP, to
request the MS to return a Packet Downlink Ack/Nack message, and
meanwhile starts T3191. If the BSC receives a response from the
MS to the specified block, T3191 is stopped. If T3191 overflows, the
downlink TBF is abnormally released because the BSC determines
that the radio link fails.
Setting this parameter to a larger value improves the success rate of
releasing downlink TBFs. By contrast, it is recommended to release
TBF and re-establish a link as early as possible to avoid wasting the
channel and TFI resources and indirectly affecting user experience.
This parameter can be set based on the recommended values
specified in Table 13.2.1: Specification of timers used in GPRS
on the Network side in 3GPP TS 04.60. No modification is
recommended.
This default value is set based on the specification.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.2.26 TBF protect time when radio link failure

Full Name
TBF protect time when radio link failure
Abbreviated Name
T3195
Managed Object

3GPP Name
T3195
3GPP Reference
N/A
2-175
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the T3195 timer, which specifies the time
for protecting the downlink TBF when an MS fails to respond due to
radio link failure or cell change.
This timer is started when N3105 equals N3105_MAX.
When the timer expires, the BSC re-uses this TFI.
Instance
BSC
Related FG
N/A
0..65535
Unit
10ms
Default Value
500
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When T3195 times out, the TFI resource is released for re-use by
the network. This parameter does not need to be set to a larger

value for data transmission because TBF is surly to be forcibly
released when N3105 reaches N3105_MAX. It is suggested
releasing TBF and then re-establishing a link as early as possible to
avoid affecting the usage of the TFI resources.
This parameter can be set based on the recommended values
specified in Table 13.2.1: Specification of timers used in GPRS on
the Network side in
The default parameter value is set based on the corresponding
Reason
protocol.
Change take effect
No
Access
Read/Write
OMC Access path

2-176
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.2.27 Bvc block/unblock retry time

Full Name
Bvc block/unblock retry time
Abbreviated Name
BssgpT1
Managed Object

3GPP Name
T1
3GPP Reference
N/A
Description
This parameter indicates the timer used to monitor the BSSGP

block/unblock procedure.
When a point-to-point BVC needs to be blocked or unblocked due
to OAM intervention or equipment faults, the BSS initiates the
BVC block/unblock procedure. If the SGSN does not return a BVC
BLOCK/UNBLOCK ACK/NACK message, the BSC repeats the BVC
blocking/unblocking procedure and the number of times for sending
messages is incremented by 1. The interval between two messages
is defined as the BVC blocking/unblocking retry time. If timer T1
times out but does not exceed the maximum sending times, the
message is retransmitted. If T1 exceeds the maximum sending
times, the message is not retransmitted.
The conditions for starting and stopping this timer and the operations
after the timer expires are as follows:
This timer is started when the BSC initiates the BVC block/unblock
procedure.
This timer is stopped when the BSC receives a BVC
BLOCK/UNBLOCK ACK/NACK message from the SGSN.
When the timer expires, the BSC repeats the procedure for N times
(configurable).
Instance
BSC
Related FG
N/A
10..300
Unit
100ms
Default Value
30
Related Parameters
N/A
2-177
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be set based on the recommended values
specified in the corresponding protocol, the link stability over the Gb

interface, and the Gb GTT. If the Gb interface operates properly,
this parameter is set based on the recommended values specified
in the corresponding protocol.
The default parameter value is set based on Protocol Recommended
Reason
Value and Gb RTT.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.28 Bvc reset retry time

Full Name
Bvc reset retry time
Abbreviated Name
BssgpT2
Managed Object

3GPP Name
T2
3GPP Reference
N/A
2-178
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the timer used to monitor the BSSGP reset
procedure.
When a BVC (including PTP BVC and signaling BVC) needs to be
reset (for example, the status of the Gb interface is changed from
disconnected to connected, the cell capability is modified from not
supporting GPRS to supporting GPRS or EDGE, or the OMCR
initiates the reset) due to some reasons, the BSS initiates the
BVC reset procedure. If the SGSN does not return a BVC RESET
ACK/NACK message, the BSC repeats the BVC reset procedure
and the number of times for sending messages is incremented by
1. The interval between two messages is defined as the BVC reset
retry time. If timer T2 times out but does not exceed the maximum
sending times, the message is retransmitted. If T2 times out and
exceeds the maximum sending times, the corresponding BVC
database status is set to BLOCK.
This timer is started when the BSC initiates the BVC reset procedure.
This timer is stopped when the BSC receives a BVC RESET
ACK/NACK message from the SGSN.
(configurable).
This parameter is changed in V6.20.614a.
Instance
BSC
Related FG
N/A
10..1200
Unit
100ms
Default Value
150
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-179
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Value and Gb RTT.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.29 Suspend retry time

Full Name
Suspend retry time
Abbreviated Name
BssgpT3
Managed Object

3GPP Name
T3
3GPP Reference
N/A
Description
This parameter indicates the timer for suspend retry. When a

Class-B MS is ready for a voice service, it notifies the network to
suspend PS services. After the BSS receives a SUSPEND message
from the MS, it initiates the suspend SGSN procedure. If the
SGSN does not return a suspend ACK/NACK message, the BSC
repeats the suspend SGSN procedure and the number of times for
sending messages is incremented by 1. The interval between two
messages is defined as the suspend retry time. If timer T3 times out
but does not exceed the maximum sending times, the message
is retransmitted. If timer T3 times out and exceeds the maximum
sending times, the suspend SGSN procedure is stopped.
This timer is started when the BSC initiates the suspend SGSN
procedure.
This timer is stopped when the BSC receives a suspend ACK/NACK
message from the SGSN.
2-180
SJ-20140527134815-013|2015-03-10(R1.1)
(configurable).
Instance
BSC
Related FG
N/A
1..100
Unit
100ms
Default Value
30
Related Parameters
ResumeSetOpt
This parameter is valid when the SUSPEND/RESUME process
Parameters
switch is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Value and Gb RTT.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.30 Resume retry time

Full Name
Resume retry time
Abbreviated Name
BssgpT4
2-181
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
T4
3GPP Reference
N/A
Description

resuming procedure.
When a GPRS-attached MS is not in the dedicated mode and
the BSS uses the "Notify SGSN to resume GPRS service" policy,
the BSS initiates the resuming procedure towards the SGSN. If
the SGSN does not return a resume ACK/NACK message, the
BSC repeats the resume procedure and the number of times for
sending messages is incremented by 1. The interval between two
messages is defined as the resume retry time. If timer T4 times out
but does not exceed the maximum sending times, the message
is retransmitted. If timer T4 times out and exceeds the maximum
sending times, the resume procedure is stopped and the BSC
notifies the MS to initiate the RAU procedure.
This timer is started when the BSC initiates the resume procedure.
This timer is stopped when the BSC receives a resume ACK/NACK
(configurable).
Instance
BSC
Related FG
N/A
1..100
Unit
100ms
Default Value
30
Related Parameters
ResumeSetOpt
This parameter is valid when the SUSPEND/RESUME process
Parameters
switch is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-182
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Value and Gb RTT.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.31 Access capability update retry time

Full Name
Access capability update retry time
Abbreviated Name
BssgpT5
Managed Object

3GPP Name
T5
3GPP Reference
N/A
Description

Radio Access Capability Update procedure.
When the BSS initiates the Radio Access Capability Update
procedure towards the SGSN, if the SGSN does not return an
RA_CAPABILITY UPDATE ACK/NACK message, the BSC repeats
the Radio Access Capability Update procedure and the number
of times for sending messages is incremented by 1. The interval
between two messages is defined as the retry time for radio access
capability update. If timer T5 times out but does not exceed the
maximum sending times, the message is retransmitted. If timer
T5 times out and exceeds the maximum sending times, the Radio
Access Capability Update procedure is stopped.
2-183
SJ-20140527134815-013|2015-03-10(R1.1)
This timer is started when the BSC initiates the Radio Access
Capability Update procedure.
This timer is stopped when the BSC receives a RA_CAPABILITY
UPDATE ACK/NACK message from the SGSN.
(configurable).
Instance
BSC
Related FG
N/A
10..300
Unit
100ms
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Value and Gb RTT.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-184
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.32 PFC creating retry time

Full Name
PFC creating retry time
Abbreviated Name
BssgpT6
Managed Object

3GPP Name
T6
3GPP Reference
N/A
Description
This parameter indicates the timer used to indicate the retry time for
PFC creation.
When the BSS initiates the Create PFC procedure towards the
SGSN, if the SGSN does not return a Create PFC ACK/NACK
message, the BSC repeats the Create PFC procedure. The interval
between two messages is defined as the retry time for PFC creation.
This timer is started when the BSC initiates the Download PFC
procedure.
This timer is stopped when the BSC receives a Create PFC
(configurable).
Instance
BSC
Related FG
ZGO-01-02-004 Streaming Service Policies
1..100
Unit
100ms
Default Value
30
Related Parameters
PFCSupport
This parameter is valid when the PFC procedure switch is enabled
Parameters
on the BSC side.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-185
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Value and Gb RTT.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.33 PFC modifying retry time

Full Name
PFC modifying retry time
Abbreviated Name
BssgpT8
Managed Object

3GPP Name
T8
3GPP Reference
N/A
Description
This parameter indicates the timer used to indicate the retry time
for PFC modification. When the BSS initiates the Modify PFC
procedure towards the SGSN, if the SGSN does not return a Modify
PFC ACK/NACK message, the BSC repeats the Modify PFC
procedure. The interval between two messages is defined as the
retry time for PFC creation.
This timer is started when the BSC initiates the Modify BSS PFC
procedure.
This timer is stopped when the BSC receives a Modify BSS PFC
Ack message from the SGSN.
2-186
SJ-20140527134815-013|2015-03-10(R1.1)
(configurable).
Instance
Related FG
BSC
ZGO-01-02-003 Service Based QoS
ZGB-01-02-001 Quality of Service (QoS)
1..100
Unit
100ms
Default Value
30
Related Parameters
PFCSupport
This parameter is valid when the PFC procedure switch is enabled
Parameters
on the BSC side.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Value and Gb RTT.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.34 Supervision Timer of LCS

2-187
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Supervision Timer of LCS
Abbreviated Name
LcsSupervision
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to monitor the location

process.
This timer is started when the BSC sends a location request to the
SMLC.
This timer is stopped when the BSC receives the location
acknowledge message.
When the timer expires, the BSC terminates the location process.
Instance
BSC
Related FG
ZGO-01-03-002 LCS with CGI+TA

ZGO-01-03-003 LCS with A-GPS
100..1000
Unit
100ms
Default Value
250
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
The parameter is set to the default value in most cases. The larger
the parameter value is, the longer the wait time needed after the
sending of a location request is.
The default parameter value is set because the location process can
Reason
be completed within 25 seconds.
Change take effect
No
Access
Read/Write
2-188
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.2.35 Radio Timer of LCS

Full Name
Radio Timer of LCS
Abbreviated Name
LcsRadio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to monitor radio information

transmission.
This timer is started when the BSC sends a location-related
message to an MS.
This timer is stopped when the BSC receives an acknowledgement
message from the MS.
Instance
BSC
Related FG

10..100
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-189
SJ-20140527134815-013|2015-03-10(R1.1)
the parameter value is, the longer the wait time needed after the
sending of a message by an MS is.
The default parameter value is set because the sending of radio
Reason
information the location process can be completed within 5 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.36 LCS wait intra BSS handover timer

Full Name
LCS wait intra BSS handover timer
Abbreviated Name
LcsWaitIntraHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to wait for the completion of
an intra-BSC handover.
This timer is started when the BSC initiates an intra-BSC handover
during a location service.
This timer is stopped when the BSC receives a handover complete
message.
Instance
BSC
Related FG

20..100
Unit
100ms
2-190
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
the parameter value is, the longer the wait time needed during
a handover is.
The default parameter value is set because the intra-BSC handover
Reason
process can be completed within 6 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.37 PS channel delay release timer

Full Name
PS channel delay release timer
Abbreviated Name
PSRelDelay
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-191
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the delay release timer when a dynamic

PDCH channel is converted to a TCH channel. The conditions for
starting and stopping this timer and the operations after the timer
expires are as follows:
This timer is started when all the uplink and downlink services on
PDCH are released.
This timer is stopped when PDCH is re-occupied by service TBF.
When the timer expires, the PDCH channel is released and
converted to a TCH channel.
Instance
BSC
Related FG
ZGB-03-02-006 Dynamic Channel Management
50..600
Unit
100ms
Default Value
300
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to a smaller value to allow CS services to
obtain the channel resources more easily. This parameter can be

set to a larger value to avoid frequent CS/PS conversion.
The default parameter value is set because a PS channel is
Reason
converted into a TCH channel for CS services if it is released and

unused for a relatively long time period.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-192
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.38 Ater wait SCCP connection timer

Full Name
Ater wait SCCP connection timer
Abbreviated Name
TAterWaitConn
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to wait for SCCP link
establishment over the ATER interface. It is used to wait for the
SCCP CONNECT CONFIRM message from the iTC.
This timer is started when a connection request message is sent
to the iTC.
This timer is stopped when
a connection confirm message is received from the iTC.
When the timer expires, a Disconnect Request message with cause
0x13 (normal) is sent to the SCCP, and services over the ATER
interface are terminated.
Instance
BSC
Related FG
ZGO-05-02-002 EGSM Frequency Band Support
5..20
Unit
100ms
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
No modification is recommended. This parameter can be set to
a larger value if the signaling transmission is slow over the ATER

interface.
The default parameter value is set because the establishment of an
Reason
SCCP link with the iTC can be completed within 1.5 seconds.
Change take effect
No
2-193
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.2.39 Ater wait resource acknowledge timer

Full Name
Ater wait resource acknowledge timer
Abbreviated Name
TWaitAterResAck
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to wait for the response
from the iTC when the iBSC requests resources from the iTC during
iBSC handover.
This timer is started when a CS service instance sends a TC
resource request message.
an iTC resource request response message is received or
an iTC resource request failure message is received.
When the timer expires, the new RANCS process ID corresponding
to this service process is cleared.
Instance
BSC
Related FG
ZGO-05-02-001 Remote Transcoder Support
5..25
Unit
100ms
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-194
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No

interface.
The default parameter value is set because the iTC can complete
Reason
resource allocation and signaling transmission within 1.5 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.40 Ater wait resource timer

Full Name
Ater wait resource timer
Abbreviated Name
TWaitAterRes
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to wait for resources over
the ATER interface. It is used to wait for the RESOURCE REQUEST
ACKNOWLEDGE message from the iTC.
This timer is started when an resource request message is sent to
the iTC over the ATER interface.
This timer is stopped when the iTC returns a resource available
message to the service instance over the ATER interface.
When the timer expires, this service is released.
Instance
BSC
2-195
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
10..30
Unit
100ms
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

interface.
The default parameter value is set because the iTC can complete
Reason
resource allocation and signaling transmission within 2 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.41 Ater wait resource release timer

Full Name
Ater wait resource release timer
Abbreviated Name
TAterWaitRel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-196
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the timer used to wait for the response to
resource release by the iTC over the ATER interface. It is used to
wait for the RESOURCE RELEASE ACKNOWLEDGE message
from the iTC.
This timer is started when an iTC resource release message is sent
to the iTC over the ATER interface.
This timer is stopped when the resource release response message
is received from the iTC.
When the timer expires, the SCCP link is released.
Instance
BSC
Related FG
20..50
Unit
100ms
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

interface.
The default parameter value is set based on TWaitAterRes.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-197
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.42 Ater handover monitor timer

Full Name
Ater handover monitor timer
Abbreviated Name
TAterMoniterHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to monitor handover over

the ATER interface. It is used to monitor the handover process
when the iTC is externally placed.
This timer is started when the service instance requests circuit
resources over the ATER interface again during a handover.
a handover execution message over the ATER interface is received
from the old CS service instance, or
a resource release request message over the ATER interface is
received from the new CS service instance.
When the timer expires, a release command is sent to the CS
service instance over the ATER interface, and an iTC resource
release message is sent to the iTC.
Instance
BSC
Related FG
70..170
Unit
100ms
Default Value
120
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
No modification is recommended. If modification is required, this
parameter should be set based on the time needed for a handover.
2-198
SJ-20140527134815-013|2015-03-10(R1.1)
The default parameter value is set because the handover process
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.43 HO performed ack timer

Full Name
HO performed ack timer
Abbreviated Name
TwaitHoPFMAck
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When IP transmission is used on the user plane over the A

interface, because the TC is placed in the MGW, CN should be
informed to change the vocoder during an intra-BSC handover.
The HANDOVER PERFORMED message is used to trigger CN
to change the vocoder. To ensure that the MSC can receive this
message and successfully instructs the MGW to change the vocoder
to avoid speech obstacles, the HANDOVER PERFORMED ACK
message is added. This parameter indicates the timer used to wait
for the HANDOVER PERFORMED ACK message from the MSC.
This timer is started when the BSC sends a HANDOVER
PERFORMED message to the MSC.
This timer is stopped when the BSC receives a HANDOVER
PERFORMED ACK message from the MSC.
message with cause 0x60 (protocol failure between the BSC and
the MSC) to the MSC.
Instance
BSC
2-199
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
50..70
Unit
100ms
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
No modification is recommended. This parameter can be set to a
larger value if the processing is slow on the CN side or the message

transmission is slow over the ATER interface.
The default parameter value is set because signaling transmission
Reason
and MSC processing can be completed within 6 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.44 RIR Timer

Full Name
RIR Timer
Abbreviated Name
TRIR
Managed Object

3GPP Name
T(RIR)
3GPP Reference
N/A
2-200
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the timer used to wait for the

response from the remote end after the control end sends a
RAN-INFORMATION-REQUEST message. This timer is started
after the control end sends a RAN-INFORMATION-REQUEST
message.
This timer is stopped when the control end receives a response
message from the remote end.
When the timer expires, if no response message is received, the
control end re-sends the RAN-INFORMATION-REQUEST message
or informs the service process failure after the message is resent for
the number of times specified by the RIMRetryTimes parameter.
Instance
BSC
Related FG
ZGO-02-02-011 Inter-BSC NACC
50..300
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
This parameter sets the flow monitoring timer. No modification is
recommended. In actual network conditions, this parameter can be

set to a larger value if the inter-NE delay is large.
Reason
the time needed for message interaction between NEs.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-201
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.45 RI Timer
Full Name
RI Timer
Abbreviated Name
TRI
Managed Object

3GPP Name
T(RI)
3GPP Reference
N/A
Description
This parameter indicates the timer used to wait for the response from
the remote end after the serving BSS sends a RAN-INFORMATION
message. This timer is started after the serving BSS sends a
RAN-INFORMATION message, in which the indicator requiring
response from the remote end is set.
This timer is stopped when the serving BSS receives a response
serving BSS re-sends the RAN-INFORMATION message or informs
the service process failure after the message is resent for the
number of times specified by the RIMRetryTimes parameter.
Instance
BSC
Related FG
50..300
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
2-202
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.2.46 RIAE Timer

Full Name
RIAE Timer
Abbreviated Name
TRIAE
Managed Object

3GPP Name
T(RIAE)
3GPP Reference
N/A
Description
This parameter indicates the timer used to wait for the

response from the remote end after the control end
sends a RAN-INFORMATION-APPLICATION-ERROR
message. This timer is started after the control end sends a
RAN-INFORMATION-APPLICATION-ERROR message.
This timer is stopped when the control end receives a response
control end re-sends the RAN-INFORMATION-APPLICATIONERROR message or informs the service process failure after the
message is resent for the specified number of times.
Instance
BSC
Related FG
50..300
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
2-203
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.47 Time to wait A handover request

Full Name
Time to wait A handover request
Abbreviated Name
TWaitAHoReq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to wait for a handover

request from the A interface during a 2G/3G relocation procedure.
This timer is started when the BSC sends a radio resource
reservation success message to the RNC.
This timer is stopped when the BSC receives a handover request
from the MSC.
When the timer expires, the BSC releases the radio resources and
this instance.
2-204
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
ZGO-02-03-005 GSM/TD-SCDMA Interworking on Iur-g Interface

ZGO-02-03-006 GSM/WCDMA Interworking on Iur-g Interface
4..50
Unit
100ms
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
larger value if the timer for waiting for an incoming handover over
the A interface expires.
The default parameter value is set because 1 second is long enough
Reason
for the RNC to send a handover request to the MSC and then for the
MSC to forward the handover request to the BSC.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.48 Timer to wait a relocation commit MSG from RNC

Full Name
Timer to wait a relocation commit MSG from RNC
Abbreviated Name
TWaitRncRelocComm
Managed Object
2-205
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used by the BSC to wait for the
Relocation Commit message from the RNC during a relocation
procedure through the Iur-g interface that is configured between 2G
and 3G networks.
This timer is started when the BSC sends a HandoverRequestAck
message to the MSC.
This timer is stopped when the BSC receives a Relocation Commit
message from the RNC through the Iur-g interface.
When the timer expires, the BSC releases the corresponding
relocation instance and allocated resources.
Instance
BSC
Related FG

1..200
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the actual on-site delay for message
transmission. No modification is recommended.
The default parameter value is set based on the maximum delay
Reason
in sending the HandoverRequestAck message from the BSC to

the MSC then to the RNC.
Change take effect
No
Access
Read/Write
2-206
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.2.49 Timer of TRAU frame Synchronization

Full Name
Timer of TRAU frame Synchronization
Abbreviated Name
TuTrauSyn
Managed Object

3GPP Name
timer of TRAU frame synchronization
3GPP Reference
N/A
Description
This parameter indicates the timer used to monitor the loss of TRAU
frame synchronization. If the function of releasing calls due to the
loss of TRAU frame synchronization is enabled, a call is released
when this timer times out.
This timer is started after an MS accesses the TCH channel.
This timer is stopped when the DSP detects that the TRAU frame
(the speech frame) is synchronized.
When the timer expires, the call is released.
Instance
BSC
Related FG
N/A
10..600
Unit
100ms
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-207
SJ-20140527134815-013|2015-03-10(R1.1)
No modification is recommended. If a large number of calls are
dropped due to TRAU frame detection, this parameter can be set to

a larger value. If the number of such call drops decreases, the length
of this timer can be extended until the call drop becomes stable.
The default parameter value is set because an interval of 1 second
Reason
is long enough for the actions from an MS's access to a channel to

the detection of the user-plane data of TRAU frames.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.50 Guards the PS handover required procedure

Full Name
Guards the PS handover required procedure
Abbreviated Name
T12PSHO
Managed Object

3GPP Name
T12
3GPP Reference
N/A
Description
This parameter indicates the timer used to control the Required

process of a PS handover.
This timer is started when a PS Handover Required message is sent.
This timer is stopped when a PS Handover Required Ack or PS
Handover Required NACK message is received.
When the timer expires, the PS Handover Required message is
resent.
Instance
BSC
Related FG
ZGO-02-02-016 PS Handover
50..1200
Unit
100ms
2-208
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
300
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
recommended. Parameters related to PS handover are not used in

commercial offices.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.51 Guard resource release after sending PS HO command

Full Name
Guard resource release after sending PS HO command
Abbreviated Name
TWaitRelInPSHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-209
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the timer used to wait for resource release
after a PS handover command is sent.
This timer is started when a PS HANDOVER COMMAND message
is sent to an MS.
This timer is stopped when a DELETE BSS PFC message is
received from the SGSN or a handover complete message is
received from the target cell.
When the timer expires, a PS Handover Cancel message is sent
to the SGSN.
Instance
BSC
Related FG
100..1000
Unit
100ms
Default Value
300
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

commercial offices.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-210
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.52 Time of waiting an internal HO command

Full Name
Time of waiting an internal HO command
Abbreviated Name
TWaitInternalHoCmd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to wait for an internal

handover command from the MSC after the BSC sends an internal
handover request message.
This timer is started when the BSC determines a handover and
sends an internal handover request to the MSC.
This timer is stopped when the BSC receives an internal handover
command from the MSC.
When the timer expires, the BSC sends a RadioUnavail message to
the target instance and clears this instance.
Instance
BSC
Related FG
1..100
Unit
100ms
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
a larger value if the timer for waiting for an internal handover

command expires.
The default parameter value is set because a signaling message
Reason
can be transmitted over the A interface and processed in the MSC

within 2 seconds.
Change take effect
2-211
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.2.53 Round trip delay

Full Name
Round trip delay
Abbreviated Name
RtdDefault
Managed Object

3GPP Name
Round Trip Delay
3GPP Reference
N/A
Description
The handover procedure with the AMR speech coding is as follows:

The BSC sends a PRE-HANDOVER NOTIFICATION message to
the BTS to extend the RTD time, so that the BTS can coordinate
with the TC to complete actions such as disabling speech rate
modification and exiting TFO. After that, the BSC sends a handover
command to the MS. The TRD time is the transmission delay time
between the BTS and the TC, and can be reported to the BSC by
the BTS in a ROUND TRIP DELAY REPORT message. Before
receiving RTD, the BSC uses the default value RtdDefault.
This timer is started when the BSC sends a PRE-HANDOVER
NOTIFICATION message to the BTS.
This timer is stopped when the BSC receives a pre-handover
response message (a customized message over the Abis interface)
from the BTS.
When the timer expires, the BSC sends a handover command to
the MS.
This parameter is currently not used.
Instance
BSC
Related FG
ZGO-01-01-003 Adaptive Multi-rate Codec (AMR)
1..20
2-212
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
20ms
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
larger value when there is a large transmission delay on the user

plane between the BTS and the TC.
The default parameter value is set because messages can be
Reason
transmitted on the user plane between the BTS and the TC within
100 ms.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.54 IP Abis Wait Timer

Full Name
IP Abis Wait Timer
Abbreviated Name
twaitabis
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-213
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the timer used to protect the admission

control of the IP transmission resources over the Abis interface.
Instance
BSC
Related FG
N/A
10..120
Unit
100ms
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
A normal admission control process is performed quickly at the level
of milliseconds. This parameter is set for protection in exceptional

cases. The default value is recommended and no modification is
recommended.
The default parameter value is set based on the empirical value
Reason
on the 3G side.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.55 synchronization timer that ensures source BSS receives

both PS and CS responses
Full Name
synchronization timer that ensures source BSS receives both PS

and CS responses
2-214
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
T23
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used by the source BSS to

synchronize CS handover and PS handover acknowledgement
information.
This timer is started after a HANDOVER REQUIRED or
PS-HANDOVER-REQUIRED PDU message is sent during a DTM
handover.
This timer is stopped when:
(1) The BSC receives a HANDOVER REQUIRED REJECT or
BSSMAP HANDOVER COMMAND message from the MSC,
and receives a PS-HANDOVER-REQUIRED-ACK PDU or
PS-HANDOVER-REQUIRED-NACK PDU message from the SGSN.
(2) The BSC receives a BSSMAP HANDOVER COMMAND
message that contains the (RR) HANDOVER COMMAND L3
information, and chooses to continue CS handover.
(3) The BSC receives a BSSMAP HANDOVER COMMAND
message that contains the (RLC/MAC) DTM HANDOVER
COMMAND L3 information, and chooses to send a DTM
handover command to the MS without waiting for the PS handover
acknowledgment.
When the timer expires, the BSC performs the exception procedure
for DTM handover failures.
Instance
BSC
Related FG
100..200
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-215
SJ-20140527134815-013|2015-03-10(R1.1)

commercial offices.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.56 synchronization timer that ensures target BSS receives both

PS and CS requests
Full Name
synchronization timer that ensures target BSS receives both PS

and CS requests
Abbreviated Name
T24
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used by the target BSS to

synchronize CS handover and PS handover request information.
This timer is started when the BSC receives a PS-HANDOVERREQUEST PDU message containing the CS Indication IE or a
HANDOVER REQUEST message containing the PS Indication IE.
This timer is stopped when the BSC receives both the HANDOVER
REQUEST and PS-HANDOVER-REQUEST PDU messages,
and the PS Indication IE and CS Indication IE contain the same
information.
When the timer expires, the BSC performs the exception procedure
for DTM handover failures.
2-216
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
40..90
Unit
100ms
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

commercial offices.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.57 T3197
Full Name
T3197
Abbreviated Name
T3197
Managed Object

3GPP Name
N/A
2-217
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the timer used for enhanced DTM CS

release. This timer is started after the BSC sends a Packet CS
Release Indication message.
This timer is stopped after the BSC receives a message indicating
that the Packet SI Status message has been completely received.
After RR is released, the Packet SI Status message is required
for keeping PS resources. The BSC sends a Channel Release
message indicating that the PS transmission is kept after CS
release. When the timer expires, if the Packet SI Status message is
not received, the BSC sends a Channel Release message indicating
that the PS transmission is not kept after CS release.
Instance
BSC
Related FG
ZGO-01-03-005 Dual Transfer Mode
0..65535
Unit
100ms
Default Value
200
Related Parameters
DTMEnhanceCapa
When DTMEnhanceCapa is open,this parameter isvalid
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is unavailable in this version. No modification is
needed.
The default parameter value is set based on network situations.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-218
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.58 Paging Interval

Full Name
Paging Interval
Abbreviated Name
PagWaitTime
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the time for the BSC to wait for a paging
response after the BSC sends a paging message. The paging
modes include the precise paging and the common paging. If the
BSC does not receive any response within this time period, the BSC
re-initiates paging according to the paging configuration.
Instance
Cell
Related FG
ZGO-02-01-002 Precise Paging

ZGO-02-01-003 Re-paging
20..80
Unit
100ms
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value of the wait time needed for receiving the response after a
paging message is sent should be greater than that specified by this

parameter. This parameter is related to the setting of BsPaMframs
and the transmission delay over the Abis interface. This parameter
should be set to a larger value if the number of paging multiframes
is large and the delay over the Abis interface is large.
The default parameter value is set because a paging response from
Reason
an MS can be received within 2.5 seconds.
Change take effect
No
2-219
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.2.59 2G Load synchronized to 3G Timer

Full Name
2G Load synchronized to 3G Timer
Abbreviated Name
Load2gSynTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer for a service to obtain 2G

cell load information from the database. The service saves the
copy of obtained load information in the storage area, and the
synchronization platform synchronizes the information to the 3G
system at a scheduled time.
Instance
BSC
Related FG
ZGO-02-03-003 GERAN/UTRAN Load Sharing
100..6000
Unit
1ms
Default Value
3000
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-220
SJ-20140527134815-013|2015-03-10(R1.1)
If this parameter is set to a larger value, the real-time synchronization
of the load is poor, which affects the determination on the 3G side. If

this parameter is set to a smaller value, the real-time synchronization
of the load is good, but the processing workload increases.
The default parameter value is set because the timer for service
Reason
instances to obtain the load of 2G cells from the database should be

long enough to avoid the impact on the efficiency due to frequent
load obtaining actions.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.60 2G Cell Radio Resource Synchronization Timer

Full Name
2G Cell Radio Resource Synchronization Timer
Abbreviated Name
CrrmSynTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer for complete synchronization of

2G cell attributes and NACC information. All 2G cell attributes and
NACC information are synchronized to the 3G system.
Instance
BSC
Related FG
1..60
Unit
100ms
Default Value
30
Related Parameters
N/A
2-221
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set to a larger value, the real-time synchronization
of the load is poor, which affects the determination on the 3G side. If

this parameter is set to a smaller value, the real-time synchronization
of the load is good, but the processing workload increases.
Cell attributes and NACC information are synchronized through the
Reason
synchronization platform. This feature has a high efficiency and

allows frequent synchronizations.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.2.61 Handover protecting timer to WCDMA/FDD

Full Name
Handover protecting timer to WCDMA/FDD
Abbreviated Name
T3121
Managed Object

3GPP Name
T3121
3GPP Reference
N/A
2-222
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the T3121 timer, which indicates the

protection time after the BSC sends an Inter-System to UTRAN
Handover Command (UM) message to an MS.
This timer is started when the BSC sends an Inter-System to
UTRAN Handover Command message to an MS.
This timer is stopped when the BSC receives a CLEAR COMMAND
message from the MSC (normally when the handover is completed)
or a HANDOVER FAILURE message from the MS.
message to the MSC with the cause CAUSE_RI_MSG_FAIL (radio
interface message failure).
Instance
Related FG
BSC
Handover
1..650
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

occur. If this parameter is set to a smaller value, the success rate
of handover is affected.
Reason
an MS to receive an inter-system handover command and then

complete the handover.
Change take effect
No
Access
Read/Write
2-223
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.2.62 SubCell Ping-Pang handover timer

Full Name
SubCell Ping-Pang handover timer
Abbreviated Name
TscPingPang
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to determine whether a

handover in the subcell is a ping-pong handover. If two handovers in
a subcell are performed within the time specified by this parameter,
a ping-pong handover between related subcells is recorded in the
performance report. The recorded information include: the number
of times that the MS performs handover back and forth between two
subcells within the same site, or the number of times that the MS
performs handover back and forth between two subcells between
two sites.
Instance
BSC
Related FG
20..1000
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-224
SJ-20140527134815-013|2015-03-10(R1.1)
The smaller the parameter value is, the less strict it is to determine a
ping-pong handover. This parameter can be used to assess whether

the inter-subcell handover parameters are set properly.
The default parameter value is set based on the wireless
Reason
environment. If an MS is handed over forth and back between two

cells within 10 seconds, a ping-pong handover occurs, which is
abnormal.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.2.63 Time of Cobcch wait for MR report

Full Name
Time of Cobcch wait for MR report
Abbreviated Name
TCobcchWaitMR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the BSC receives the assignment command from the MSC,
if the MR is not enough for deciding whether channels can be
assigned in the second sub-cell, the BSC sets this parameter to
wait for more MR.
Instance
BSC
Related FG
0..30
Unit
100ms
Default Value
Related Parameters
N/A
2-225
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the procedure for establishing a call is long because encryption
and authentication flows are added to this procedure, when MRs

exist before the assignment, set this parameter to 0.
If the procedure for establishing a call is short, you can set this
parameter to a value except 0 to wait for MRs. This will reduce the
connectivity rate. Therefore, this parameter is set to 0 when the
assignment is performed to the second sub-cell.
Waiting for the measurement report to determine whether to assign
Reason
to the second sub-cell can reduce the connectivity rate. If the first
sub-cell is not so busy,
services can be handed over to the second sub-cell through the
subsequent inter-cell handover.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.2.64 SDCCH Channel release period

Full Name
SDCCH Channel release period
Abbreviated Name
TSDRelPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-226
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the SDCCH release period.

This parameter indicates the timer (T3109) that is used for
monitoring the channel release procedure.
This timer is started when the BSC sends an RIL3_RR CHANNEL
RELEASE message to an MS.
This timer is stopped when the BSC receives a RELEASE
INDICATION message from the BTS that receives DISC frames
from the MS.
message to the BTS with the cause value "T3109OUT".
Instance
BSC
Related FG
0..1000
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be adjusted to a smaller value according to
the test requirement.
The default SDCCH release period must be the same as the default
Reason
TCH release period.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-227
SJ-20140527134815-013|2015-03-10(R1.1)
2.2.65 SDCCH Channel deactivation delay

Full Name
SDCCH Channel deactivation delay
Abbreviated Name
TSDDeactDelay
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the SDCCH deactivation delay.

After the radio link layer connection on the Um interface is released,
a period of protection time is set to ensure that the radio link layer
is disconnected. This parameter indicates the timer (rmsT3111)
that sets the protection time. The release and deactivation of radio
channels are allowed only when rmsT3111 expires.
This timer is started when the BSC receives a RELEASE
INDICATION message.
message to the BTS with the cause value "T3111OUT".
Instance
BSC
Related FG
1..300
Unit
100ms
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, the deactivation delay for protection is not very long. A
delay shorter than one second is recommended.
The default SDCCH deactivation delay must be the same as the
Reason
default TCH deactivation delay.
Change take effect
No
2-228
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.2.66 Protective time for reassigning procedure

Full Name
Protective time for reassigning procedure
Abbreviated Name
ReAssignProtect
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The longest period for making a reassignment after an assignment

is performed. The service assignment is deemed as successful
if the reassignment succeeds within this period. An assignment
failure message is sent to the core network if reassignment still fails
within this period.
Instance
BSC
Related FG
20..300
Unit
100ms
Default Value
90
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-229
SJ-20140527134815-013|2015-03-10(R1.1)
If ReAssignMax is turned higher and assignment failure is returned
to MSC before the assignment times get to the ReAssignMax value,

then the ReAssignProtect value can be raised.
T3107 is defaulted as 6 seconds. The protection time of the
Reason
reassignment process is defaulted as 9 seconds so that the

reassignment process will be executed at least once.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.2.67 Mute call detect timer

Full Name
Mute call detect timer
Abbreviated Name
MuteCallDetTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer for a unilateral conversation

check. If the package lost duration exceeds the threshold, a
unilateral conversation check is triggered.
Instance
BSC
Related FG
10..3000
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
2-230
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too small, wrong judgments may be made in the
handover process. If the value is too big, the user may have hung
up before the mute call problem is found out. The default value is
recommended.
If there is no data transmission on a channel for 10 seconds, the
Reason
BSC performs a check to confirm a unilateral conversation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.2.68 Timer wait for BTS start using dynamic TRX

Full Name
Timer wait for BTS start using dynamic TRX
Abbreviated Name
TwaitBtsDynamicFreq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a timer for waiting for the BTS response
after the BSC allocates the dynamic frequencies and informs the
BTS to start using them.
Instance
BSC
Related FG
ZGO-04-03-008 Dynamic Frequency Allocation Feature Guide
10..100
2-231
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter needs no adjustment unless specially required. If
the network delay is high or the BTS responds slowly, you can
increase the value of this parameter.
In most cases, the BTS responses in 5 seconds.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.2.69 Wait reroute respond timer of CS

Full Name
Wait reroute respond timer of CS
Abbreviated Name
TWaitRerouteCS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-232
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates a timer for waiting for the MSC response
after the BSC initiates a rerouting procedure and attempts to access
the MSC during an MOCN implementation.
Instance
BSC
Related FG
1..120
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value needs no adjustment unless specially required. If the
MSC replies slowly, you can increase the value of this parameter.
In most cases, the MSC responses in 5 seconds.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.2.70 Wait reroute respond timer of PS

Full Name
Wait reroute respond timer of PS
Abbreviated Name
TWaitReroutePS
Managed Object
2-233
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a timer for waiting for the SGSN response
after the BSC initiates a rerouting procedure and attempts to access
the MSC during an MOCN implementation.
Instance
BSC
Related FG
1..120
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value needs no adjustment unless specially required. If the
SGSN replies slowly, you can increase the value of this parameter.
In most cases, the SGSN responses in 5 seconds.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-234
SJ-20140527134815-013|2015-03-10(R1.1)
2.3 BSS Function Handover

Control(GBssHandoverControl)
2.3.1 BSC Handover Control ID
Full Name
BSC Handover Control ID
Abbreviated Name
GBssHandoverControlId
Managed Object
BSS Function Handover Control(GBssHandoverControl)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a BSC handover control ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
2-235
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Information Configuration->BSS Function Handover Control
N/A
2.3.2 Handover synchronization indication support

Full Name
Handover synchronization indication support
Abbreviated Name
HoSyncInd
Managed Object

3GPP Name
ROT: Report Observed Time Difference
3GPP Reference
N/A
Description
This parameter indicates whether to carry the Synchronization

Indication IE in a handover message. If this parameter is set to
"1 (Yes)", the BSC adds the Synchronization Indication IE in a
Handover Command message to be sent and sets ROT to 1 for
both synchronous and asynchronous handovers. In this case, the
MS adds the Mobile Observed Time Difference IE in a Handover
complete message to be sent, reporting the clock reference
difference between the source and target cells in this handover.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-236
SJ-20140527134815-013|2015-03-10(R1.1)
When the synchronous network (which means the radio frame
synchronization that is implemented through accessing the GPS

signal from the BTS) is used, this parameter can be set to "1
(Yes)" to check Mobile Observed Time Difference in the Handover
Complete message and assess the synchronization result.
The time reference difference between two cells does not need to
Reason
be measured.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.3.3 Internal redirection enable

Full Name
Internal redirection enable
Abbreviated Name
InDREnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to allow an assignment to

request a channel from other cells in the BSC when the assignment
fails to obtain a channel.
Instance
BSC
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
OutDREnable
2-237
SJ-20140527134815-013|2015-03-10(R1.1)
This function is supported only when both the BSC- and cell-level
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function should be enabled when congestion due to fluctuation
occurs in individual cells and the channel resources in the

neighbor cells are idle. This function relieves network congestion
and unbalanced wireless resource load, and improves the call
connection rate. However, this function also increases the access
delay and affects user experience. For the network that is heavily
congested, even if this function is enabled, the network situation
cannot be improved. Instead, capacity expansion and traffic
balancing should be used.
The default parameter value is set to "1 (Allowed)" in the system
Reason
control parameters. It is required to modify only the corresponding

cell parameters to perform cell-level control.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.3.4 Outer redirection enable

Full Name
Outer redirection enable
Abbreviated Name
OutDREnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-238
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines whether to allow an assignment to

request a channel from the cells outside the BSC when the
assignment fails to obtain a channel.
Instance
BSC
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
InDREnable
This function is supported only when both the BSC- and cell-level
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
This function should be enabled when congestion due to fluctuation
occurs in individual cells and the channel resources in the

neighbor cells are idle. This function relieves network congestion
and unbalanced wireless resource load, and improves the call
connection rate. However, this function also increases the access
delay and affects user experience. For the network that is heavily
congested, even if this function is enabled, the network situation
cannot be improved. Instead, capacity expansion and traffic
balancing should be used.
The default parameter value is set because the MSC and the
Reason
outgoing handover procedure are involved. In most cases, this

function is disabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-239
SJ-20140527134815-013|2015-03-10(R1.1)
2.3.5 BSC intracell handover enable

Full Name
BSC intracell handover enable
Abbreviated Name
HoIntraEnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to allow the BSC to perform

intra-cell handover.
Instance
BSC
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
recommended. This parameter is not used for intra-cell handover

control.
The default parameter value is set because handover is a basic
Reason
function.
Change take effect
No
Access
Read/Write
OMC Access path

2-240
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.3.6 SDCCH handover enable

Full Name
SDCCH handover enable
Abbreviated Name
SHoEnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to allow SDCCH handover.
Instance
BSC
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
sdhoControl
This function is supported in a cell only when both the BSC- and
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled in the cells that cover the expressway
area to improve the access success rate.
The default parameter value is set when an MS does not move at a
Reason
high speed because the duration on the SD is very short.
Change take effect
No
Access
Read/Write
2-241
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.3.7 Handover request response

Full Name
Handover request response
Abbreviated Name
HoACK
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the MSC should return response

messages when the BSC is handed over to an external cell.
In an inter-BSC handover, if this parameter is set to "1 (Yes)", the
HANDOVER REQUIRED message contains the Response Request
IE, and the MSC returns a Response Request Reject message to
the BSC upon handover failure. If this parameter is set to "0 (No)",
the MSC does not return a Response Request Reject message to
the BSC upon handover failure, and the BSC knows the handover
failure through the timeout of timer T7.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
2-242
SJ-20140527134815-013|2015-03-10(R1.1)
It is suggested setting this parameter to "1 (Yes)".
The MSC is not required to respond, but timeout actions are
Reason
required.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.3.8 Old BSS to new BSS information

Full Name
Old BSS to new BSS information
Abbreviated Name
OldToNewCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the contents in the Old BSS to New BSS
Information IE contained in a HANDOVER REQUIRED message in
an outgoing handover. The four items Synchronization Indication,
Cipher Mode Setting, Multi-Rate configuration, and Frequency List
are controlled by the upper four bits of the system control parameter
OldToNewCtrl.
BIT3: Whether Multi-Rate configuration is sent. Options: 0: NOT
SENT, 1: SENT.
BIT5: Whether the hopping frequency parameter is set in the
FreqList format. Options: 0: NO, 1: YES.
BIT6: Whether to optimize the setting of AMR MultiFrequency.
Options: 0: NO, 1: YES.
BIT7: Whether a HANDOVER COMMAND contains the cipher
information parameter. Options: 0: NO, 1: YES.
2-243
SJ-20140527134815-013|2015-03-10(R1.1)
BIT8: Whether to optimize the synchronization information

parameter. Options: 0: NO, 1: YES.
Instance
BSC
Related FG
0..255
Unit
N/A
Default Value
64
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is disabled by default. Whether to enable this function
depends on the on-site requirements.
It is a functional switch and is disabled by default. bit7 is enabled
Reason
by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.3.9 Queuing indicator in handover required message

Full Name
Queuing indicator in handover required message
Abbreviated Name
HandOutQueInd
Managed Object

2-244
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether queuing is allowed during

inter-BSC outgoing handover, that is, whether queuing is allowed
according to the Queuing Indicator parameter in the Handover
Required message.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
In the case of an inter-BSC handover, if the channels in the target
cell are congested, this function can be enabled to relieve the

congestion. This parameter for the source BSC should be set to "1
(allowed)" to enable the Queuing Indicator parameter contained in
the Handover Required message to indicate that queuing is allowed.
In this case, the MSC can indicate to the target BSC through the
Handover Required message that queuing is allowed.
The default parameter value is set because the BSC determines
Reason
whether to perform a handover whenever it receives a measurement

report and different target cells are possibly selected.
Change take effect
No
Access
Read/Write
OMC Access path

2-245
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.3.10 A+B solution for TD handover enabled

Full Name
A+B solution for TD handover enabled
Abbreviated Name
TDAplusBEnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable the A+B solution

for TD handover. In the A+B solution, only reselection towards
TD-SCDMA is supported while handover towards TD-SCDMA is not
supported. China Mobile promotes this solution because terminals
are in poor support for handover from GSM to TD-SCDMA. The
default value is used.
Instance
BSC
Related FG

Handover
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is used only in the projects of China Mobile that
is the only operator to deploy TD-SCDMA. Therefore, the default

value is recommended in most cases unless there are special
requirements from the operator.
The default parameter value is set to support the A+B solution for
Reason
TD-SCDMA handover.
2-246
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.3.11 Pingpong handover duration

Full Name
Pingpong handover duration
Abbreviated Name
PingPongDura
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to determine whether a

handover is a ping-pong handover. This timer is started when an
MS performs a handover from a cell. If the MS performs a handover
back to the source cell, and the interval between two handovers is
shorter than the value specified by this parameter, this handover is
recorded as a ping-pong handover.
Instance
BSC
Related FG
ZGB-02-02-002 Basic Handover Decision Criteria
0..60
Unit
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-247
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
The default value is recommended. The larger the parameter value
is, the longer the time needed for determining a handover to be a

ping-pong handover is.
The default parameter value is set because if an MS is handed over
Reason
forth and back between two cells within 10 seconds, the handover is
considered as a ping-pong handover.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.3.12 Use N/P When Select Neighbour Cell for Pbgt Handover On
Sdcch
Full Name
Use N/P When Select Neighbour Cell for Pbgt Handover On Sdcch
Abbreviated Name
NcellSelCtrlPbgt1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the N value, P value, or the last

average PBGT value is used for neighbor cell selection in the case
of PBGT handover on the SDCCH channel.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
2-248
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is suggested enabling this parameter because it is more proper for
neighbor cell selection in the case of PBGT handover.
The default parameter value is set because the traditional method
Reason
used in neighbor cell selection is proved to be stable and reliable.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.3.13 Use N/P When Select Neighbour Cell for Pbgt Handover On
Tch
Full Name
Use N/P When Select Neighbour Cell for Pbgt Handover On Tch
Abbreviated Name
NcellSelCtrlPbgt2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

average PBGT value is used for neighbor cell selection in the case
of PBGT handover on the TCH channel.
2-249
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is suggested enabling this parameter because it is more proper for
neighbor cell selection in the case of PBGT handover.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.3.14 Use N/P When Select Neighbour Cell for Uplink Quality
Handover On Sdcch
Full Name
Use N/P When Select Neighbour Cell for Uplink Quality Handover
On Sdcch
Abbreviated Name
NcellSelCtrlUlQ1
Managed Object
2-250
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description

average level value is used for neighbor cell selection in the case of
uplink quality handover on the SDCCH channel.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This function is not used in most cases. It is more proper to use the
N/P value for neighbor cell selection, but this may lead to a slow
handover.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-251
SJ-20140527134815-013|2015-03-10(R1.1)
2.3.15 Use N/P When Select Neighbour Cell for Uplink Quality
Handover On Tch
Full Name
Use N/P When Select Neighbour Cell for Uplink Quality Handover
On Tch
Abbreviated Name
NcellSelCtrlUlQ2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

uplink quality handover on the TCH channel.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
handover.
Reason
Change take effect
No
2-252
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.3.16 Use N/P When Select Neighbour Cell for Downlink Quality
Handover On Sdcch
Full Name
Use N/P When Select Neighbour Cell for Downlink Quality Handover
On Sdcch
Abbreviated Name
NcellSelCtrlDlQ1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

downlink quality handover on the SDCCH channel.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
handover.
2-253
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.3.17 Use N/P When Select Neighbour Cell for Downlink Quality
Handover On Tch
Full Name
Use N/P When Select Neighbour Cell for Downlink Quality Handover
On Tch
Abbreviated Name
NcellSelCtrlDlQ2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

downlink quality handover on the TCH channel.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-254
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
handover.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.3.18 Use N/P When Select Neighbour Cell for Uplink Level
Handover On Sdcch
Full Name
Use N/P When Select Neighbour Cell for Uplink Level Handover
On Sdcch
Abbreviated Name
NcellSelCtrlUlLev1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

uplink level handover on the SDCCH channel.
Instance
BSC
Related FG
2-255
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
handover.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.3.19 Use N/P When Select Neighbour Cell for Uplink Level
Handover On Tch
Full Name
Use N/P When Select Neighbour Cell for Uplink Level Handover
On Tch
Abbreviated Name
NcellSelCtrlUlLev2
Managed Object

2-256
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description

uplink level handover on the TCH channel.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
handover.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-257
SJ-20140527134815-013|2015-03-10(R1.1)
2.3.20 Use N/P When Select Neighbour Cell for Downlink Level
Handover On Sdcch
Full Name
Use N/P When Select Neighbour Cell for Downlink Level Handover
On Sdcch
Abbreviated Name
NcellSelCtrlDlLev1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

downlink level handover on the SDCCH channel.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
handover.
Reason
Change take effect
No
2-258
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.3.21 Use N/P When Select Neighbour Cell for Downlink Level
Handover On Tch
Full Name
Use N/P When Select Neighbour Cell for Downlink Level Handover
On Tch
Abbreviated Name
NcellSelCtrlDlLev2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

downlink level handover on the TCH channel.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
handover.
2-259
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.3.22 BSC Internal Handover Parameter of IPA

Full Name
BSC Internal Handover Parameter of IPA
Abbreviated Name
IPAInterHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the handover method used by CS services

during an intra-BSC handover in the case of 3GPP IPA.
Instance
BSC
Related FG
0: Try to use compatible speech version when intra bsc handover

1: Adopt internal handover with MSC support when handover from
AMR-HR to AMR-FR both use ACS set1
2: Use BSC perfered speech version when intra bsc handover
AMR-FR to AMR-HR both Use ACS set1
AMR-FR to AMR-HR or AMR-HR to AMR-FR both use ACS set1
Unit
N/A
Default Value
Related Parameters
N/A
2-260
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to "0" in most cases. If the MSC fails to
process the handover from AMR FR SET1 to HR SET1, for example,

unidirectional communication or data loss occurs, this parameter
can be set to "1". If the MSC fails to process the handover from AMR
HR SET1 to FR SET1, for example, unidirectional communication
or data loss occurs, this parameter can be set to "3". If the MSC
fails to process both handovers, this parameter can be set to "4".
If the speech version with BSC preferred is expected to be used,
this parameter can be set to "2".
The default parameter value is set to remain TRFO. In addition,
Reason
as specified in the protocol, SET1 is the rate set of FR AMR and

HR AMR. Handovers do not require MAC processing. If the MSC
supports these handover modes, do not set it to "1", "3" or "4".
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.3.23 Handover between cells of different net support

Full Name
Handover between cells of different net support
Abbreviated Name
InterNetHO
Managed Object

3GPP Name
N/A
2-261
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter determines whether to allow inter-cell (cells with

different network IDs) handover. If it is set to "0 (NO)", The neighbor
cell for handover and the neighbor cell for handover and reselection
must have the same network ID (MCC/MNC) as this cell.
Instance
BSC
Related FG
ZGO-03-07-001 Basic BSS Sharing for Multiple Operators
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter can be set to "0" in most cases unless there are
special requirements from the operator.
The default parameter value is set because handovers between
Reason
different operators may cause extra charge.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.3.24 the policy of choosing speech version in 3GPP IPA BSC

handover
2-262
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
the policy of choosing speech version in 3GPP IPA BSC handover
Abbreviated Name
ipabschotype
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the policy of selecting the after-handover

speech channel type during an intra-BSC handover in the case of
3GPP IPA. There are three policies:
The same speech channel type is used before and after the
handover.
The preferred speech channel type specified by CN during an
assignment request is used after the handover.
If the AMR speech type is used before the handover, the preferred
speech channel type specified by CN during an assignment request
is used after the handover.
Instance
BSC
Related FG
0: the same channel type in handover preferred

1: the channel type in ASSIGNMENT REQUEST preferred ,when
using AMR
2: the channel type in ASSIGNMENT REQUEST preferred ,anytime
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be modified if the operator requires reducing
HR-type calls. If modified, this parameter can be modified to "1". If

there are not many MSs that support AMR, this parameter can be
modified to "2".
2-263
SJ-20140527134815-013|2015-03-10(R1.1)
The default parameter value is set because as specified in 3GPP
Reason
protocols, if the same speech version is used before and after a

handover, the corresponding procedure is the simplest and the
usage of TC resources is minimized.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.3.25 Forbid Handover during releasing

Full Name
Forbid Handover during releasing
Abbreviated Name
ForbidRelHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch used to forbid handover during release.

When this parameter is enabled, the BSC does not send a
handover command to the BTS if another handover occurs after
the BSC receives a DISCONNECT or RELEASE message. This
prevents delayed release of the MS. After the BSC receives the
DISCONNECT or RELEASE message, no handover decision
can be made during the period specified by the parameter
ForbidRelHoMargin. This parameter can reduce call drops caused
by handover during release. It has no impact on the handover
success rate.
Instance
BSC
Related FG
N/A
0..1
Unit
N/A
2-264
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
No modification is needed unless special problems occur.
This parameter is enabled by default to prevent delayed release of
Reason
MSs in specific scenarios.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.3.26 the interval of forbid Handover

Full Name
the interval of forbid Handover
Abbreviated Name
ForbidRelHoMargin
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a period of time during which handover in

a release procedure is forbidden. For details, refer to the description
of the parameter ForbidRelHo.
Instance
BSC
2-265
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
N/A
10..100
Unit
100ms
Default Value
40
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, no modification is needed. If the parameter is adjusted to
a larger value, handover will be forbidden for a long time, which may
influence the handover timeliness. If the parameter is adjusted to a
smaller value, this value must ensure the time generally required for
a release procedure to complete.
A period of four seconds is long enough for a release procedure to
Reason
complete but not too long.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.3.27 Optimize when handover command lost

Full Name
Optimize when handover command lost
Abbreviated Name
HoCmdLostOpt
Managed Object

2-266
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
A call drop may occur during a handover if the handover command

is lost on the Abis interface due to a certain reason (such as
congestion). This parameter determines whether the handover
command loss detection is enabled to prevent call drops.
Instance
BSC
Related FG
ZGO-02-02-024 Handover Command Lost Optimization
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This function can be enabled when it is required to reduce call drops
caused by loss of handover commands on the Abis interface.
This function is disabled by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.3.28 The delay after handover command when optimize

2-267
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
The delay after handover command when optimize
Abbreviated Name
TDelayAftHoCmdOpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the waiting time after a handover command

is sent, during which the BSC does not stop the handover timer.
The BSC determines whether the command handover is lost on the
Abis interface during this time period. If the handover command
loss detection function is enabled, the BSC detects whether the
call resumes (meaning a normal layer 3 measurement report is
received) at expiry of this period. If the call resumes, the BSC
determines that the handover command is lost, and then kills the
handover timer. The larger the parameter value is, the later the BSC
kills the handover timer when the call resumes. This prevents the
BSC from initiating the next handover timely. The parameter value
must be greater than T200N200. Or else, the BSC may fail to
make a correct judgment about the loss of handover command.
Instance
BSC
Related FG
ZGO-02-02-024 Handover Command Lost Optimization
1..120
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The parameter value must be greater than T200(N200+1). The
value of T200 is considered as 5 or 6 seconds when the default

value of this parameter is defined. The larger the parameter value
is, the later the BSC kills the handover timer when the call resumes.
This prevents the BSC from initiating the next handover timely.
This default value is an empirical value.
Reason
2-268
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.3.29 Old BSS to new BSS information 1

Full Name
Old BSS to new BSS information 1
Abbreviated Name
OldToNewCtrl1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the contents in the Old BSS to New BSS
Information IE contained in the HANDOVER REQUIRED message
in an outgoing handover. It is an extension of OldToNewCtrl.
BIT0: whether to send the TraceId and ExTraceId. 0: NO, 1: YES.
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-269
SJ-20140527134815-013|2015-03-10(R1.1)
The default value 1 is recommended unless you want to shorten the
handover signalling message. When the CDT function is enabled,

this parameter must be set to 1.
Just like the previous version, the Old BSS to New BSS information
Reason
IE carries TraceId and ExTraceId.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.4 eMLPP Configuration(GBssEmlpp)

2.4.1 eMLPP ID
Full Name
eMLPP ID
Abbreviated Name
GBssEmlppId
Managed Object
eMLPP Configuration(GBssEmlpp)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an eMLPP ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
2-270
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->eMLPP Configuration
N/A
2.4.2 Queue indicate when assign

Full Name
Queue indicate when assign
Abbreviated Name
queueIndAss
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether queuing or a channel

assignment based on cell settings is allowed when there are no
available channels in a cell during an assignment.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: Queue forbidden when assign

1: Queue allowed when assign
2: According to the cell
2-271
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
PreemptionIndAss
ForcedHolndAss
QueueIndAss

Parameters
When PreemptionIndAss is set to "1 (Forced release allowed when

assign)" or ForcedHolndAss is set to "1 (Forced handover allowed
when assign)", QueueIndAss must be set to "1 (Queue allowed
when assign)".
When PreemptionIndAss or ForcedHolndAss is set to "2 (According
to the cell)", QueueIndAss must be set to "2 (According to the cell)".
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
When the network is busy with services, this function can be enabled
to relieve channel congestion, but the duration of connection for a

queuing subscriber may be increased.
The default parameter value is set because this function does not
Reason
need to be enabled in the case of adequate network resources.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.4.3 Queue allowed when handover

Full Name
Queue allowed when handover
Abbreviated Name
queueIndHo
Managed Object
2-272
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether queuing or a channel

available channels in a cell during a handover.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: Queue forbidden when handover

1: Queue allowed when handover
Unit
N/A
Default Value
Related Parameters
PreemptionIndHo
ForcedHolndHo
QueueIndHo
When PreemptionIndHo is set to "1 (Forced release allowed when
Parameters
handover)" or ForcedHolndHo is set to "1 (Forced handover allowed

when handover)", QueueIndHo must be set to "1 (Queue allowed
when handover)".
When PreemptionIndHo or ForcedHolndHo is set to "2 (According to
the cell)", QueueIndAss must be set to "2 (According to the cell)".
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
When the network is busy with services, this function can be enabled
to relieve channel congestion.
The default parameter value is set because there are too many
Reason
target cells for handover and the time interval between handover
attempts is short.
Change take effect
No
Access
Read/Write
2-273
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.4.4 Forced handover indication for assign

Full Name
Forced handover indication for assign
Abbreviated Name
forcedHoIndAss
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a forced handover or a channel

Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: Forced handover forbidden when assign

1: Forced handover allowed when assign
Unit
N/A
Default Value
Related Parameters
QueueIndAss
When ForcedHolndAss is set to "2 (According to the cell)",
Parameters
QueueIndAss must be set to "1 (Queue allowed when assign)" or "2

(According to the cell)".
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
2-274
SJ-20140527134815-013|2015-03-10(R1.1)
To ensure that high-priority subscribers can obtain a channel by
forcibly handing over another subscriber out of the cell during

an assignment procedure, the forced handover function should
be enabled. If forced handover may be used by the assignment
preemption strategy (AssPreemptstrategy), this function should be
enabled.
The default parameter value is set because forced handover is used
Reason
only in the network that needs the eMLPP function.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.4.5 Forced handover indication for handover

Full Name
Forced handover indication for handover
Abbreviated Name
forcedHoIndHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a forced handover or a channel

Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: Forced handover forbidden when handover

1: Forced handover allowed when handover
Unit
N/A
2-275
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
QueueIndHo
When ForcedHolndHo is set to "2 (According to the cell)",
Parameters
QueueIndHo must be set to "1 (Queue allowed when handover)" or

"2 (According to the cell)".
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
To ensure that high-priority subscribers can obtain a channel by
forcibly handing over another subscriber out of the cell during

an assignment procedure, the forced handover function should
be enabled. If forced handover may be used by the handover
preemption strategy (HoPreemptstrategy), this function should be
enabled.
The default parameter value is set because forced handover is used
Reason
only in the network that needs the eMLPP function.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.4.6 Forced release indicate when assign

Full Name
Forced release indicate when assign
Abbreviated Name
preemptionIndAss
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-276
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines whether a forced release or a channel

Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: Forced release forbidden when assign

1: Forced release allowed when assign
Unit
N/A
Default Value
Related Parameters
QueueIndAss
When PreemptionIndAss is set to "1 (Forced release allowed when
Parameters
assign)", QueueIndAss must be set to "1 (Queue allowed when

assign)".
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
To ensure that high-priority users can obtain a channel as far as
possible during an assignment procedure, the forced release

function should be enabled. If forced release may be used by the
assignment preemption strategy (AssPreemptstrategy), this function
should be enabled.

Reason
The default parameter value is set because forced release has

more impact on low-priority subscribers. This function is enabled
only if required.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-277
SJ-20140527134815-013|2015-03-10(R1.1)
2.4.7 Forced release allowed when handover

Full Name
Forced release allowed when handover
Abbreviated Name
preemptionIndHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a forced release or a channel

Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: Forced release forbidden when handover

1: Forced release allowed when handover
Unit
N/A
Default Value
Related Parameters
QueueIndHo
When PreemptionIndAss is set to "2 (According to the cell)",
Parameters
QueueIndAss must be set to "1 (Queue allowed when assign)" or "2

(According to the cell)".
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
To ensure that high-priority users can obtain a channel as far as
possible during a handover procedure, the forced release function

should be enabled. If forced release may be used by the handover
preemption strategy (HoPreemptstrategy), this function should be
enabled.
The default parameter value is set because forced release affects
Reason
low-priority subscribers more. This function is enabled only if

required.
Change take effect
No
2-278
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.4.8 Wait resource timer after forced handover

Full Name
Wait resource timer after forced handover
Abbreviated Name
forceHoWait
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to wait for resources after a
forced handover. If related resources are obtained within the period
specified by this parameter, no more forced handovers or releases
are initiated and the assignment stops queuing. If not, more forced
handovers or releases are initiated or the assignment is still queued
for resources, depending on the parameter settings.
This parameter is set according to the time required for a complete
handover.
This timer is started when a forced handover is initiated and the
assignment waits for a channel release.
This timer is stopped when the MS that initiates the forced handover
obtains a channel.
When the timer expires, more forced handovers or releases are
initiated or the assignment is still queued for resources, depending
on the parameter settings.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
10..40
Unit
100ms
Default Value
25
2-279
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
No modification is required in most cases. If modified, this parameter
should be set to a value greater than the time needed for the
completion of the handover and the availability of the channel.
The default parameter value is set because handover can be
Reason
completed and channels can be available within 2.5 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.4.9 Wait resource timer after forced release

Full Name
Wait resource timer after forced release
Abbreviated Name
forceRelWait
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-280
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the timer used to wait for resources after a
forced release. If related resources are obtained within the period
specified by this parameter, no more forced releases are initiated
and the assignment stops queuing. If not, more forced releases are
initiated or the assignment is still queued for resources, depending
on the parameter settings.
This parameter is set according to the time required for a complete
forced release.
This timer is started when a forced release is initiated and the
assignment waits for a channel release.
This timer is stopped when the MS that initiates the forced release
obtains a channel.
When the timer expires, more forced releases are initiated or
the assignment is still queued for resources, depending on the
parameter settings.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
10..40
Unit
100ms
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
No modification is required in most cases. If modified, this parameter
should be set to a value greater than the time needed for the
completion of the release and the availability of the channel.
The default parameter value is set because release can be
Reason
completed and channels can be available within 2.5 seconds.
Change take effect
No
Access
Read/Write
2-281
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.4.10 Enough low priority for preemption

Full Name
Enough low priority for preemption
Abbreviated Name
lowestPriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the lowest priority for a forced handover

or forced release. During searches for the targets for a forced
handover or a forced release, if the priorities of the targets are not
higher than the priority specified by this parameter, these targets are
considered to have the lowest priority and can serve as the targets
for a forced handover or a forced release. No more searches are
performed. The value "1" indicates the highest priority.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
1..15
Unit
N/A
Default Value
14
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-282
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter should be set based on the priority of the existing
low-priority subscribers that require preemption, which saves

the time for searching. For example, if the priority of low-priority
subscribers is 7 in the network, this parameter should be set to "7"
because no subscribers with a lower priority can be found.
The default parameter value is set because subscribers with the
Reason
lowest priority can always be found if this parameter is set to "14".

The value 14 is a common setting but does not necessarily have the
highest efficiency.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.4.11 Enough call duration for preemption

Full Name
Enough call duration for preemption
Abbreviated Name
longCallDuration
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the longest call duration for a forced

handover or a forced release. During searches for the targets for
a forced handover or a forced release, the longer the call duration
is, the more proper the MS serves as the target. The MS with the
longest call duration is found only after all the MSs are searched. If
the call durations of the targets are longer than the value specified
by this parameter, the call durations of these targets are considered
to be long enough and these targets can serve as the targets for
a forced handover or a forced release. No more searches are
performed.
2-283
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0..65535
Unit
480ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to a larger value if the call of a subscriber
is not expected to be forcibly released due to short call duration.
The default parameter value is set because an MS is considered to
Reason
have occupied a channel for long enough if the channel is occupied

by the subscriber for more than 50 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.4.12 Forced handover target penalty time

Full Name
Forced handover target penalty time
Abbreviated Name
forceHoPenalty
Managed Object
3GPP Name
N/A
2-284
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the time period in which the target of a

forced handover cannot serve a handover target any more after
a forced handover fails.
This timer is started when the target fails to complete a handover
and release the channel.
When the timer expires, this MS can serve as the target for a forced
handover again.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0..255
Unit
480ms
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the change of the radio signal of a
forcibly released MS. This parameter can be set to a smaller value

when the MS is in the high mobility.
The default parameter value is set to avoid failures caused by
Reason
repeated forced handovers of the same MS.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-285
SJ-20140527134815-013|2015-03-10(R1.1)
2.4.13 Priority of emergency service

Full Name
Priority of emergency service
Abbreviated Name
emergServicelPrio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the priority of emergency calls. Those

calls with priorities higher than or equal to the parameter value are
emergency calls. The value "1" indicates the highest priority.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
1..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
This parameter is set based on the priority carried by the local MSC
during an emergency call assignment procedure.
The default parameter value is set because the priority of emergency
Reason
calls is 1 in most cases.
Change take effect
No
Access
Read/Write
OMC Access path

2-286
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.4.14 User priority threshold for EMLPP

Full Name
User priority threshold for EMLPP
Abbreviated Name
priThreshold
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the subscriber priority threshold for channel

reservation. In the service of preferred access for high-priority
subscribers, that is the eMLPP service, the system may reserve
some channels (currently, only full-rate TCH channels are supported
to be the reserved channels).
When a CS instance calls the database to request a channel, the
subscriber's PriorityLevel information is sent to the database, and
is compared with the value of PriThreshold in the BSC table. If the
value of PriorityLevel is smaller than the value of PriThreshold (the
smaller the subscriber's priority level value is, the higher the priority
level is, which means that the subscriber's priority level is not lower
than PriThreshold), a reserved channel can be used.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
1..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-287
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is set based on the allocation of user priorities. In
most cases, only a few high-priority subscribers are allowed to

obtain reserved channels.

Reason
The default parameter value is set because the subscribers who

are allocated with reserved channels have higher priorities in most
cases.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.4.15 Reserved channel first

Full Name
Reserved channel first
Abbreviated Name
rsvChanFirst
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a reserved channel or a

non-reserved channel is preferred to be allocated to a high-priority
subscriber. If this function is enabled, a reserved channel is
preferred to be allocated to a high-priority subscriber.
Options include:
1: A reserved channel is preferred.
0: A non-reserved channel is preferred.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0..1
Unit
N/A
2-288
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When there are not many high-priority subscribers in the network,
it is recommended that reserved channels be preferred to save

channel resources. When there are many high-priority subscribers
in the network, it is recommended that non-reserved channels
be preferred to ensure that high-priority subscribers can obtain
channels.
The default parameter value is set because reserved channels are
Reason
preferred in most cases to avoid the waste of channel resources.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.4.16 Support EMLPP

Full Name
Support EMLPP
Abbreviated Name
supportEmlpp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-289
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines whether the eMLPP function is

supported in a cell, including queuing, forced handover, forced
release, and channel reservation. Options:
0: No
1: Yes
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
EMLPPThs
EMLPPThs
QueueIndAss
PreemptionIndAss
ForcedHolndAss
ForcedHolndHo
PreemptionIndHo
QueueIndHo
When this parameter is set to "0 (No)", these related parameters
Parameters
do not take effect.
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
This function is enabled in most cases. If the queuing, forced
release, forced handover and channel reservation functions are

expected to not take effect, this function can be disabled.
The default parameter value is set because the queuing function is
Reason
frequently used. This function is enabled by default to avoid that the

queuing function does take effect.
Change take effect
No
Access
Read/Write
OMC Access path

2-290
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.4.17 EMLPP channel reserved rate

Full Name
EMLPP channel reserved rate
Abbreviated Name
emlppThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the proportion of channels reserved

for high-priority subscribers when the eMLPP service function is
enabled, which allows high-priority subscribers to obtain channels
first.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0..100
Unit
Default Value
Related Parameters
EMLPPThs
If cell-level eMLPP reservation (UseCelleMLPPThs) is enabled, the
Parameters
cell-level EMLPPThs is used. Otherwise, the BSC-level EMLPPThs

is used.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher the parameter value is, the more the reserved channels
are. High-priority subscribers are guaranteed to obtain channels,

but low-priority users have less available channels.
The lower the parameter value is, the less the reserved channel are.
High-priority users are not highly guaranteed.
2-291
SJ-20140527134815-013|2015-03-10(R1.1)
The default parameter value is set because reserved channels
Reason
cannot be used by low-priority subscribers, and setting reserved

channels often increases the congestion rate.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.5 eMLPP User Priority

Configuration(GEmlppUserPriority)
2.5.1 eMLPP User Priority Configuration ID
Full Name
eMLPP User Priority Configuration ID
Abbreviated Name
GEmlppUserPriorityId
Managed Object
eMLPP User Priority Configuration(GEmlppUserPriority)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an eMLPP user priority configuration ID.
Instance
BSC
Related FG
N/A
1..15
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
2-292
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->eMLPP Configuration->eMLPP User
Priority Configuration
N/A
2.5.2 User priority

Full Name
User priority
Abbreviated Name
userPriority
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter provides the priorities corresponding to a group of

eMLPP parameters. These priorities are equal to the priority levels
contained in the A-interface messages.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
1..15
Unit
N/A
2-293
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
1..15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value is fixed to 1-15. No modification is required.
The default parameter value is set because the value 1 indicates
Reason
the highest priority.
Change take effect
No
Access
Read
OMC Access path

N/A
2.5.3 Strategy for preemption when assign

Full Name
Strategy for preemption when assign
Abbreviated Name
assPreemptstrategy
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-294
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines the preemption policy in the assignment

procedure when there are no available channels. It is set for each
priority level, 1 to 15. The priority level is specified by the Priority
parameter in the Assignment Request message or Handover
Request message from the CN.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: Only forced handover

1: First forced handover, if fail, forced release
2: First forced release
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set to "0 (Only forced handover)", low-priority
subscribers are least affected, but it is more likely that high-priority

subscribers cannot obtain channels. If this parameter is set to "1
(First forced handover, if fail, forced release)", it is less likely that
high-priority subscribers cannot obtain channels, but it is slow for
these subscribers to obtain channels when forced handovers fail.
If this parameter is set to "2 (First forced release)", it is more likely
that high-priority subscribers can obtain channels, but low-priority
subscribers are greatly affected.
The default value is set because forced handover has little impact
Reason
on low-priority subscribers.
Change take effect
No
Access
Read/Write
OMC Access path

2-295
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.5.4 Strategy for preemption when handover

Full Name
Strategy for preemption when handover
Abbreviated Name
hoPreemptstrategy
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines the preemption policy in the handover

procedure when there are no available channels. It is set for each
priority level, 1 to 15. The priority level is specified by the Priority
parameter in the Assignment Request message or Handover
Request message from the CN.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
0: Only forced handover

1: First forced handover, if fail, forced release
2: First forced release
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-296
SJ-20140527134815-013|2015-03-10(R1.1)
If this parameter is set to "0 (Only forced handover)", low-priority
subscribers are least affected, but it is more likely that high-priority

subscribers cannot obtain channels. If this parameter is set to "1
(First forced handover, if fail, forced release)", it is less likely that
high-priority subscribers cannot obtain channels, but it is slow for
these subscribers to obtain channels when forced handovers fail.
If this parameter is set to "2 (First forced release)", it is more likely
that high-priority subscribers can obtain channels, but low-priority
subscribers are greatly affected.
The default value is set because forced handover has little impact
Reason
on low-priority subscribers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.5.5 Max forced handover times when assign

Full Name
Max forced handover times when assign
Abbreviated Name
assForcedHoTry
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-297
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies the maximum number of forced handover

attempts when there are no available channels in a cell during
an assignment. After a forced handover is initiated, if one of the
following three conditions happens and the maximum number
specified by this parameter is not reached, more forced handovers
can be attempted:
(1) The subscriber whose services are forcibly handed over fails to
request a channel towards its neighbor cells.
(2) The forced handover fails.
release the channel within the time specified by the ForceHoWait
parameter.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
1..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
High-priority VIP subscribers can attempt forced handovers for more
times when forced release is not set.
The default parameter value is set to increase the success rate of
Reason
forced handover and affect fewer subscribers.
Change take effect
No
Access
Read/Write
OMC Access path

2-298
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.5.6 Max forced handover times when handover

Full Name
Max forced handover times when handover
Abbreviated Name
hoForcedHoTry
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the maximum number of forced handover

attempts when there are no available channels in a cell during a
handover. After a forced handover is initiated, if one of the following
three conditions happens and the maximum number specified by this
parameter is not reached, more forced handovers can be attempted:
request a channel towards its neighbor cells.
(2) The forced handover fails.
release the channel within the time specified by the ForceHoWait
parameter.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
1..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
High-priority VIP subscribers can attempt forced handovers for more
times when forced release is not set.
2-299
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
forced handover and affect fewer subscribers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.5.7 Max forced release times when assign

Full Name
Max forced release times when assign
Abbreviated Name
assForcedRelTry
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the maximum number of forced release

attempts when there are no available channels in a cell during an
assignment. After a forced release is initiated, if the subscriber fails
to release the channel within the time specified by the ForceRelWait
parameter and the maximum number specified by this parameter is
not reached, more forced releases can be attempted.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
1..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-300
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
High-priority VIP subscribers can attempt forced releases for more
times.
Reason
forced release and affect fewer subscribers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.5.8 Max forced release times when handover

Full Name
Max forced release times when handover
Abbreviated Name
hoForcedRelTry
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the maximum number of forced release

attempts when there are no available channels in a cell during a
handover. After a forced release is initiated, if the subscriber fails to
release the channel within the time specified by the ForceRelWait
parameter and the maximum number specified by this parameter is
not reached, more forced releases can be attempted.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
2-301
SJ-20140527134815-013|2015-03-10(R1.1)
1..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
High-priority VIP subscribers can attempt forced releases for more
times.
Reason
forced release and affect fewer subscribers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.5.9 Preemption duration when assign

Full Name
Preemption duration when assign
Abbreviated Name
assPreempTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-302
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the timer used to specify the time period
in which preemptions (forced handovers or forced releases) can be
initiated when there are no available channels in a cell during an
assignment. If the timer expires, the assignment must be queued
(The queuing period includes the preemption time) and no more
forced handovers or forced releases are initiated.
This timer is started when a preemption is initiated in an assignment,
which is a forced handover attempt or a forced release attempt.
This timer is stopped when a channel is obtained.
When the timer expires, no more forced handovers or forced
releases are attempted.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
25..130
Unit
100ms
Default Value
40
Related Parameters
RmsT11
AssPreempTimer
The value of RmsT11 should be greater than that of AssPreempTimer
Parameters
with the same priority.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For high-priority VIP subscribers, this parameter can be set to
a larger value for them to more easily obtain channels through

preemption.
The default parameter value is set because multiple preemptions
Reason
can be attempted within 4 seconds.
Change take effect
No
Access
Read/Write
OMC Access path


2-303
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.5.10 Preemption duration when handover

Full Name
Preemption duration when handover
Abbreviated Name
hoPreempTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to specify the time period
in which preemptions (forced handovers or forced releases) can be
initiated when there are no available channels in a cell during a
handover. If the timer expires, the handover must be queued (The
queuing period includes the preemption time) and no more forced
handovers or forced releases are initiated.
This timer is started when a preemption is initiated in a handover,
which is a forced handover attempt or a forced release attempt.
When the timer expires, no more forced handovers or forced
releases are attempted.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
10..130
Unit
100ms
Default Value
20
Related Parameters
RmsTqho
HoForceRelTimer
The value of AssForceRelTimer should be smaller than that of
Parameters
AssPreempTimer with the same priority.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-304
SJ-20140527134815-013|2015-03-10(R1.1)
For high-priority VIP subscribers, this parameter can be set to
a larger value for them to more easily obtain channels through

preemption.
The default parameter value is set because preemption during a
Reason
handover can be completed within 2 seconds.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.5.11 Timer for start forced release when assign

Full Name
Timer for start forced release when assign
Abbreviated Name
assForceRelTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When there are no available channels in a cell during an assignment,

if both forced handover and forced release are allowed, a forced
handover is attempted first. If no channel is obtained, no more
forced handovers are initiated after this timer expires. Instead, a
forced release is attempted. This parameter determines when to
attempt a forced release during an assignment.
This timer is started when a forced handover is initiated in an
assignment.
When the timer expires, a forced release is attempted.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
2-305
SJ-20140527134815-013|2015-03-10(R1.1)
20..125
Unit
100ms
Default Value
30
Related Parameters
AssPreempTimer
The value of RmsTqho should be greater than that of
Parameters
HoPreempTimer with the same priority.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For high-priority VIP subscribers, this parameter can be set to a
smaller value so that forced release, if set, can start as early as

possible.
The default parameter value is set to include the time needed for
Reason
obtaining a channel through a forced release.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.5.12 Timer for start forced release when handover

Full Name
Timer for start forced release when handover
Abbreviated Name
hoForceRelTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-306
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When there are no available channels in a cell during a handover,

if both forced handover and forced release are allowed, a forced
handover is attempted first. If no channel is obtained, no more
forced handovers are initiated after this timer expires. Instead, a
forced release is attempted. This parameter determines when to
attempt a forced release during a handover.
This timer is started when a forced handover is initiated in a
handover.
When the timer expires, a forced release is attempted.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
10..125
Unit
100ms
Default Value
13
Related Parameters
HoPreempTimer
The value of HoForceRelTimer should be smaller than that of
Parameters
HoPreempTimer with the same priority.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
smaller value so that forced release, if set, can start as early as

possible.
The default parameter value is set to include the time needed for
Reason
obtaining a channel through a forced release.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-307
SJ-20140527134815-013|2015-03-10(R1.1)
2.5.13 Interval for search forced handover target when assign

Full Name
Interval for search forced handover target when assign
Abbreviated Name
assForceHoInterval
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer used to wait before the next
target search if the forced handover target cannot be found and
there are no available channels in a cell during an assignment.
This timer is started when no target is found after a forced handover
is initiated in an assignment.
This timer is stopped when a forced release is attempted after the
forced release timer expires.
When the timer expires, another search for the forced handover
target is initiated.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
5..20
Unit
100ms
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
smaller value.
The default parameter value is set because the BSC can obtain
Reason
a channel through multiple forced handover attempts with a

reasonable frequency.
Change take effect
No
2-308
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.5.14 Interval for search forced handover target when handover

Full Name
Interval for search forced handover target when handover
Abbreviated Name
hoForceHoInterval
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter decides the waiting time before the next target
search if the forced handover target cannot be found and there are
no available channels in the cell during a handover.
Start: No target is found after a forced handover is initiated.
Stop: Forced releases are attempted after the timer expires.
At expiry: Another search for the forced handover target will be
done.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
5..20
Unit
100ms
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-309
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
For important subscribers who have high priorities, the attempt
interval can be set to a short duration.
Using the default value, the BSC can obtain a channel through
Reason
multiple attempts and forced handovers, but without too many

handovers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.5.15 Interval for search forced release target when assign

Full Name
Interval for search forced release target when assign
Abbreviated Name
assForceRelInterval
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
search if the forced release target cannot be found and there are no
available channels in the cell during an assignment.
Start: No target is found after a forced release is initiated during
the assignment.
Stop: The timer for preemption expires.
At expiry: Another search for the forced release target will be done.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
5..20
2-310
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
100ms
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
multiple attempts and forced handovers, but without too many

releases.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.5.16 Interval for search forced release target when handover

Full Name
Interval for search forced release target when handover
Abbreviated Name
hoForceRelInterval
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-311
SJ-20140527134815-013|2015-03-10(R1.1)
Description
search if the forced release target cannot be found and there are no
available channels in the cell during a handover.
Start: No target is found after a forced release is initiated during
the handover.
Stop: The timer for preemption expires.
At expiry: Another search for the forced release target will be done.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
5..20
Unit
100ms
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
multiple attempts and forced release, but without too many releases.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-312
SJ-20140527134815-013|2015-03-10(R1.1)
2.5.17 Queue timer for assign

Full Name
Queue timer for assign
Abbreviated Name
rmsT11
Managed Object

3GPP Name
T11
3GPP Reference
N/A
Description
This parameter decides the maximum time to wait in queue for

resources when there are no available channels in the cell during
an assignment. If no resource is obtained during the time period,
the assignment fails.
Start: No channel is available for the assignment and the
assignment queues.
Stop: A channel is accessed.
At expiry: The channel allocation will fail and an assignment failure
message will be sent to the MSC.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
10..150
Unit
100ms
Default Value
60
Related Parameters
AssPreempTimer
For the same priority, the RmsT11 should be longer than
Parameters
AssPreempTimer.
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
You can prolong this period to a little extent when a user is still
patient.
The default value ensures that there is enough time for channel
Reason
release and it is not too long before a channel is allocated.
Change take effect
No
2-313
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.5.18 Queue timer for handover

Full Name
Queue timer for handover
Abbreviated Name
rmsTqho
Managed Object

3GPP Name
Tqho
3GPP Reference
N/A
Description
This parameter decides the maximum time to wait in queue for

resources when there are no available channels in the cell during
a handover. If no resource is obtained during the time period, the
handover fails.
Start: No channel is available for the handover and the handover
queues.
Stop: A channel is accessed.
At expiry: The channel allocation and handover attempt will fail.
Instance
BSC
Related FG
ZGO-01-03-001 eMLPP
10..150
Unit
100ms
Default Value
25
Related Parameters
HoPreempTimer
For the same priority, the RmsTqho should be longer than
Parameters
HoPreempTimer.
Value Type
long
Parameter Type
Negotiation With CN
Yes
2-314
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
Considering that the subsequent measure reports can trigger new
handover attempts, the interval for waiting in a queue can be set

to a short time.
The default value ensures that there is enough time for channel
Reason
release and it is not too long before a channel is allocated.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.6 BSS Function PS(GBssFunctionPS)

2.6.1 BSC PS ID
Full Name
BSC PS ID
Abbreviated Name
GBssFunctionPSId
Managed Object
BSS Function PS(GBssFunctionPS)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a BSC PS ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-315
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->BSS Function PS
N/A
2.6.2 Bvc flow control period

Full Name
Bvc flow control period
Abbreviated Name
CellFcPer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-316
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is the BVC leakage ratio measurement period in the

"BVC Flow Control" process, that is, BVC long measurement period.
To provide reference to the BVC flow control at SGSN side, the
BSSGP process at BSS side periodically measures the current
BVC leakage ratio. BSC initiates the "BVC flow control" procedure
unconditionally when the long measurement timer overflows. SGSN
confirms to BSC if the difference of leakage ratios between the two
times exceeds CellFcThs.
BSC also initiates "BVC flow control" procedure with SGSN
confirmation if the short measurement timer overflows, and the
difference of the leakage ratio between the two times exceed
CellFcThs. The conditions of timer start, stop, and expired actions
are as follows:
Timer start: Cell is being created.
Timer stop: The cell is blocked or deleted.
Expired action: BVC flow control process is initiated unconditionally.
Instance
BSC
Related FG
ZGB-03-05-016 Downlink BVC Flow Control
100..65535
Unit
10ms
Default Value
1000
Related Parameters
BVCFlowCtrl
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The recommended value is 1000. If the duration is too short, the
load on the GB interface is increased. If the duration is too long, the

function of BVC flow control is invalid.
If this duration is too long, the flow control cannot be performed
in time.
If the timer is not set properly, download may be interrupted, which
affects indicators related to the throughput rate.
This timer must be set in accordance with the settings for the SGSN.
The value must match that configured for the SGSN.
The recommended value is 1000. If the duration is too short, the
Reason
load on the GB interface increases. If the duration is too long, the

BVC flow control function is affected.
2-317
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.6.3 MS flow control period

Full Name
MS flow control period
Abbreviated Name
MsFcPer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the MS leakage ratio measurement period in the

MS Flow Control process.
For reference of flow control at the SGSN side, the BSSGP process
at the BSS side periodically measures the current leakage ratio of
each MS. When the statistic timer overflows, the MS Flow Control
process is initiated unconditionally.
The conditions of timer start, stop, and expired actions are as
follows:
Timer start: BSSGP receives the downlink LLC frame at idle status.
Timer expired: downlink LLC frame transmission is done.
Timeout action: MS flow control process is initiated unconditionally.
Instance
BSC
Related FG
ZGB-03-05-017 Downlink MS Flow Control
100..65535
Unit
10ms
Default Value
600
Related Parameters
MSFlowCtrl
2-318
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The recommended value is 600. If the duration is too short, the load
on the GB interface is increased. If the duration is too long, the

function of MS flow control is invalid.
The recommended value is 600. If the duration is too short, the load
Reason
on the GB interface is increased. If the duration is too long, the

function of MS flow control is invalid.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.6.4 Max times of radio access capabilities update retry

Full Name
Max times of radio access capabilities update retry
Abbreviated Name
UpdateMax
Managed Object

3GPP Name
RA-CAPABILITY-UPDATE-RETRIES
3GPP Reference
N/A
2-319
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This is a BSSGP layer parameter used to specify the maximum

number of times the BSS retries to obtain the radio access capability
of an MS via the Radio Access Capability Update procedure when
the BSS does not have the information of the access capabilities of
MSs. The access capabilities are required by the BSS for assigning
a proper packet channel to each MS when the MS is establishing
the uplink TBF.
The related procedure is as follows:
1. The BSS sends the RA-CAPABILITY-UPDATE PDU to the SGSN.
2. If a BSS sends a RA-CAPABILITY-UPDATE PDU to an SGSN
and the RA-CAPABILITY-UPDATE-ACK is not returned within
a period BSSGPT5 with the same Tag value as provided in the
request, the RA-CAPABILITY-UPDATE procedure shall be repeated
a maximum of UpdateMax attempts.
3. The BSC retries the procedure for the number of times specified
by UpdateMax, and, if still not receives returned messages, stops
the RADIO ACCESS CAPABILITIES UPDATE procedure and
notifies the OMS.
Instance
BSC
Related FG
N/A
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be set based on the default value, the link
stability of the Gb interface, and the Gb interface delay. If the Gb

interface operates properly, use the default value.
This default value is set according to the corresponding protocol.
Reason
Change take effect
No
0
2-320
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.6.5 Max times of PFC create retry

Full Name
Max times of PFC create retry
Abbreviated Name
DownloadBssPfcMax
Managed Object

3GPP Name
DOWNLOAD-BSS-PFC-RETRIES
3GPP Reference
N/A
Description
Max retry times to create PFC. If a CREATE-BSS-PFC PDU is

not received for a DOWNLOAD-BSS-PFC PDU within BSSGPT6
seconds, then the DOWNLOAD-BSS-PFC PDU shall be
repeated a maximum of DownloadBssPfcMax attempts. After
DownloadBssPfcMax + 1 attempts the procedure is stopped and the
O&M system is informed.
Instance
BSC
Related FG

0..10
Unit
N/A
Default Value
Related Parameters
PFCSupport
This parameter is effective if the PFC procedure is enabled on the
Parameters
BSC side.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-321
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.6 Max times of PFC modify retry

Full Name
Max times of PFC modify retry
Abbreviated Name
ModifyBssPfcMax
Managed Object

3GPP Name
MODIFY-BSS-PFC-RETRIES
3GPP Reference
N/A
Description
Max retry times to modify PFC. If a MODIFY-BSS-PFC-ACK is not

received in response to a MODIFY-BSS-PFC PDU within BSSGPT8
seconds, then the MODIFY-BSS-PFC PDU shall be repeated a
maximum of ModifyBssPfcMax attempts. After ModifyBssPfcMax+1
attempts the procedure is stopped and the O&M is informed.
Instance
BSC
Related FG

0..10
Unit
N/A
Default Value
2-322
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
PFCSupport
This parameter is effective if the PFC procedure is enabled on the
Parameters
BSC side.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.7 Max times of Bvc block retry

Full Name
Max times of Bvc block retry
Abbreviated Name
BVCBlkMax
Managed Object

3GPP Name
BVC-BLOCK-RETRIES
3GPP Reference
N/A
2-323
SJ-20140527134815-013|2015-03-10(R1.1)
Description
If the PTP BVC must be blocked due to OAM intervention or

equipment faults (disable blocking/unblocking the signaling BVC),
BSS will first set the BVC status as "Blocked" and discard the uplink
service data.
To notify SGSN to stop sending downlink data, BSS initiates BVC
blocking procedure. If a BVC-BLOCK-ACK PDU is not received for a
BVC-BLOCK PDU within BSSGPT1 seconds, then the BVC-BLOCK
PDU procedure shall be repeated a maximum of BVCBlkMax
attempts. After BVCBlkMax attempts the BVC remains blocked, the
procedure is stopped and the O&M system is informed.
Instance
BSC
Related FG
N/A
3..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-324
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.8 Max times of Bvc unblock retry

Full Name
Max times of Bvc unblock retry
Abbreviated Name
BVCUblkMax
Managed Object

3GPP Name
BVC-UNBLOCK-RETRIES
3GPP Reference
N/A
Description
If the PTP BVC must be unblocked due to the OAM intervention or

recovery of the equipment fault (disable blocking/unblocking the
signaling BVC), BSS will first set the BVC status as "Unblocked".
To notify SGSN to start sending the downlink data, BSS will initiate
the BVC unblocking procedure. If a BVC-UNBLOCK-ACK PDU is
not received for a BVC-UNBLOCK PDU within BSSGPT1 seconds,
then the BVC-UNBLOCK PDU procedure shall be repeated a
maximum of BVCUblkMax attempts. After BVCUblkMax attempts
the status of the BVC remains blocked, the procedure is stopped
and the O&M system is informed.
Instance
BSC
Related FG
N/A
3..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
2-325
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.6.9 MAX times of Bvc reset retry

Full Name
MAX times of Bvc reset retry
Abbreviated Name
BVCRestMax
Managed Object

3GPP Name
BVC-RESET-RETRIES
3GPP Reference
N/A
Description
A BVC-RESET procedure is performed because of recovery

procedures related to:
- a system failure in the SGSN or BSS that affects GPRS BVC
functionality (e.g. processor recovery);
- an underlying network service system failure; or
- a change in the transmission capability of the underlying network
service, where the "change" is from zero kbps to greater-than-zero
kbps;
- a change in mapping between the BVCI and cell identifier.
The BSS may also send BVC-RESET as a means to create the
initial mapping between BVCIs and cell identifications.
For faults that affect NSE, BSC initiates Signaling BVC RESET
procedure. For faults that affect a single BVC, BSC initiates the
PTP BVC RESET procedure. BSC initiates all PTP BVC RESET
procedure for corresponding NSE after a signaling BVC reset
procedure.
If a BSS sends a BVC-RESET PDU to an SGSN and the
BVC-RESET-ACK PDU is not returned within a period BSSGPT2,
the BVC-RESET procedure shall be repeated a maximum of
BVCRestMax attempts. After BVCRestMax attempts the procedure
is stopped and the O&M system is informed. In case of PTP BVC,
2-326
SJ-20140527134815-013|2015-03-10(R1.1)
the status of all affected BVCs at the BSS shall be blocked as a

consequence.
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.10 Max times of suspend retry

Full Name
Max times of suspend retry
Abbreviated Name
suspendMax
Managed Object
2-327
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
SUSPEND-RETRIES
3GPP Reference
N/A
Description
MS first sends a SUSPEND message to BSS on SDCCH when a

Class B GPRS MS is about to initiate a voice service. BSS initiates
suspending procedure to SGSN to notify SGSN to stop sending PS
paging and downlink unit data after BSS receives the message.
If a SUSPEND-ACK PDU is not received for a SUSPEND PDU within
BSSGPT3 seconds, then the SUSPEND PDU procedure shall be
repeated a maximum of suspendMax attempts. After suspendMax
attempts the procedure is stopped and the O&M system is informed.
Instance
BSC
Related FG
N/A
0..10
Unit
N/A
Default Value
Related Parameters
ResumeSetOpt
This parameter is effective if the SUSPEND/RESUME(ResumeSe-
Parameters
tOpt=1) flow is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-328
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.6.11 Max times of resume retry

Full Name
Max times of resume retry
Abbreviated Name
resumeMax
Managed Object

3GPP Name
RESUME-RETRIES
3GPP Reference
N/A
Description
This parameter is a BSSGP layer parameter. When the reason why

a GPRS-attached MS was suspended disappears, i.e.:
- it leaves dedicated mode, disconnecting the MS from the MSC; or
- it is handed over to a cell that supports DTM;
the BSS shall either a) instruct the MS to initiate the Routeing Area
Update procedure, or b) signal to the SGSN that an MS's GPRS
service shall be resumed.
If the BSS executes a), then no further action is required.
If the BSS executes b), then the BSS shall send a RESUME PDU
containing the same Suspend Reference Number received in the
SUSPEND-ACK PDU to the SGSN and start timer BSSGPT4.
If a RESUME-ACK PDU is not received for a RESUME PDU within
BSSGPT4 seconds, then the RESUME PDU procedure shall be
repeated a maximum of resumeMax attempts. After resumeMax
attempts the procedure is stopped, the O&M system is informed
and the MS shall be instructed to initiate the Routeing Area Update
procedure.
Instance
BSC
Related FG
N/A
0..10
Unit
N/A
Default Value
Related Parameters
ResumeSetOpt
This parameter is effective if ResumeSetOpt=0 and resumeMax=3
Parameters
Value Type
long
Parameter Type
2-329
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.12 Max allowed number of continuous losses of uplink data

blocks(N3101)
Full Name
Max allowed number of continuous losses of uplink data

blocks(N3101)
Abbreviated Name
N3101
Managed Object

3GPP Name
N3101
3GPP Reference
N/A
Description
When the network after setting USF, receives a valid data block
from the mobile station in a block assigned for this USF, it will reset
counter N3101. The network will increment counter N3101 for each
USF for which no data is received. N3101max shall be greater than
8. If N3101 = N3101max, the network shall stop the scheduling
of RLC/MAC blocks from the mobile station for this USF and start
timer T3169.
Instance
BSC
2-330
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
ZGB-03-05-015 RLC Acknowledged/Unacknowledged Mode
9..255
Unit
N/A
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value, the less the uplink exception
can be tolerated on the network side. If the parameter value is too

great, even if the network fails to receive uplink data because of the
MS, the network still allocates uplink resources to the MS, which
wastes system resources. In basic PS measurement, "abnormal
release number of uplink TBF by N3101 overflow" records some
of the causes for TBF abnormal release. In normal cases, the
causes are poor link on the Abis interface, poor quality of the air
interface, incorrect network coverage, and MS faults, for example,
cell reselection. After these causes are removed, you can increase
the overflow threshold to a specified extent to reduce "abnormal
release number of uplink TBF by N3101 overflow", and thus the
network QoS can be improved.
Reduce "abnormal release number of uplink TBF by N3101
Reason
overflow" and improve the network KPI.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2-331
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.13 Times of packet uplink ACK/NACK retries(N3103)

Full Name
Times of packet uplink ACK/NACK retries(N3103)
Abbreviated Name
N3103
Managed Object

3GPP Name
N3103
3GPP Reference
N/A
Description
This parameter is the counter N3103, which is a RLC/MAC layer

parameter in the Packet Control Unit (PCU). The counter N3103
counts the number of Packet Uplink ACK/NACK retry attempts.
In the process of packet uplink transmission, if the network detects
that the TBF is completed (CV=0, and V(Q)=V(R)), and has received
all RLC data blocks, the network should send a Packet Uplink
ACK/NACK message, set the Final ACK Indicator (FAI) to 1, adds
a legal RRBP field in the header of the RLC/MAC control block,
and clears the counter N3103.
If the MS receives the PACKET UPLINK ACK/NACK message
(FAI=1) from the network, the MS should send the PACKET
CONTROL ACK message on the block specified by the RRBP and
releases the TBF.
If the network does not receive the PACKET CONTROL ACK
message on the block specified by the RRBP, the counter N3103 is
increased by 1 and the PACKET UPLINK ACK/NACK message is
retransmitted.
If the value of counter N3103 exceeds the limit specified by the
parameter N3103max, the network starts the timer T3169. Upon
timeout of T3169, the network can use the TFI and USF resources
again.
Instance
BSC
Related FG
0..255
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-332
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is too small, the network has a very limited
tolerance to uplink exceptions, which increases the probability

of abnormal uplink TBF releases. If the parameter value is too
large, the network may fail to receive a correct PACKET CONTROL
ACKNOWLEDGEMENT message due to poor quality of the air
interface or the action of the MS and still allocate radio resources to
the MS, which results in a waste of system resources. Therefore,
an appropriate value must be set for N3103 in accordance with
the network conditions (such as, air interface quality, transmission
link quality, and the MS condition) to reduce abnormal uplink TBF
releases caused by N3103 overflow and thus improve the network
performance.
The default value is set to 10 to reduce abnormal uplink TBF
Reason
releases caused by N3103 overflow, improve the network

performance, and prevent a long delay before TBF release. N3103
is a counter used for TBF release.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.14 Max allowed number of continuous losses of uplink

RLC/MAC control message(N3105)
Full Name
Max allowed number of continuous losses of uplink RLC/MAC

control message(N3105)
Abbreviated Name
N3105
Managed Object

2-333
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N3105
3GPP Reference
N/A
Description
This parameter is the counter N3105, which is used in the RLC/MAC

layer of the PCU.
The counter N3105 is reset when the network receives a valid
RLC/MAC control message from an MS after sending an RRBP
field in a downlink RLC data block or RLC/MAC control block. It
is incremented by one when the network does not receive an
RLC/MAC control message for an allocated data block. When the
N3105 value reaches the N3105Max value, the TBF is released.
The value of N3105Max is network dependent.
Instance
BSC
Related FG
0..255
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is too small, the network has a very limited
tolerance to uplink exceptions, which increases the probability of

abnormal downlink TBF releases. If the parameter value is too
large, the network may fail to receive a correct PACKET (EGPRS)
DOWNLINK ACK message due to the action of the MS and still
allocate radio resources to the MS, which results in a waste of
system resources. Therefore, an appropriate value must be set
for N3105 in accordance with the network conditions (such as, air
interface quality, transmission link quality, and the MS condition) to
reduce abnormal downlink TBF releases caused by N3105 overflow
and thus improve the network performance.
The default value is set to reduce abnormal downlink TBF releases
Reason
caused by N3105 overflow and improve the network performance.
Change take effect
No
2-334
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.6.15 Bvc flow control support

Full Name
Bvc flow control support
Abbreviated Name
BVCFlowCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
BVC flow control occurs at Gb interface between SGSN and BSS,

and only in downlinks. BSS provides control parameters and SGSN
executes, in order to avoid one BVC on BSS to abandoning some
LLC data because of the overtime caused by PDCHs are too
busy (too many LLC frame caches) and to avoid abandoning new
downlink LLC data because of limit of memory resource (overflow of
LLC frame caches).
BSSGP process at BSS side counts current leaking rate of BVC
periodically (including short statistics and long statistics). If the long
statistics timer overflows, this parameter unconditionally initiates
the BVC flow control process; if the discrepant range of adjacent
leaking rates is over CellFcThs, acknowledgement by SGSN is
required. If the short statistics timer overflows and if discrepant
range of adjacent leaking rates is over CellFcThs, this parameter
initiates the BVC flow control process, and acknowledgement by
SGSN is required.
Instance
BSC
Related FG
0: Not Support
1: Support
Unit
N/A
2-335
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
On the Gb interface, the cell flow control is enabled by default.
You can enable or disable BVC flow control in accordance with the
algorithm used by the CN.
The system is interconnected with the CN, and thus the BVC flow
Reason
control is enabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.16 MS flow control support

Full Name
MS flow control support
Abbreviated Name
MSFlowCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-336
SJ-20140527134815-013|2015-03-10(R1.1)
Description
MS flow control occurs at Gb interface between SGSN and BSS,

and only in downlinks. BSS provides control parameters and SGSN
executes, to avoid one MS on BSS to abandoning some LLC data
because of the overtime caused by PDCHs are too busy (too many
LLC frame caches) and to avoid abandoning new downlink LLC
data because of limit of memory resource (overflow of LLC frame
caches).
The BSSGP process at the BSS side periodically measures the
current leakage ratio of MS. When the statistic timer overflows, the
MS Flow Control process is initiated unconditionally.
Instance
BSC
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter should be set in accordance with the cell flow control
granularity on the CN side and whether MS flow control is supported.
The default value is set initially in accordance with the cell flow
Reason
control granularity.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-337
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.17 Bvc flow control R MIN value

Full Name
Bvc flow control R MIN value
Abbreviated Name
BVCFlowCtrlRMin
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This is the minimum value of leaking rate R in reported BVC flow

control parameters under all kinds of flow control mode, that is, the
reported parameter R must be equal or over the set value, in the
unit of 100 bps.
Instance
BSC
Related FG
10..1000
Unit
100 bps
Default Value
300
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
This parameter is effective if flow control is enabled.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The modification of the parameter is determined by flow control of
the CN. If the setting of the parameter affects the transmission of

downlink data, increase (if the transmission is not continuous) or
decrease (the data is transmitted at a too high speed) the value.
The default value is determined by the minimum theoretical speed
Reason
of a single GPRS PDCH.
Change take effect
No
2-338
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.6.18 MS flow control R MIN value

Full Name
MS flow control R MIN value
Abbreviated Name
MSFlowCtrlRMin
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This is the minimum value of leaking rate R in reported MS flow

control parameters under all kinds of flow control mode, that is, the
reported parameter R must be equal or over the set value, in the
unit of 100 bps.
Instance
BSC
Related FG
10..1000
Unit
N/A
Default Value
300
Related Parameters
MSFlowCtrl
This parameter is effective if flow control is enabled.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The modification of the parameter is determined by flow control of
the CN. If the setting of the parameter affects the transmission of

downlink data, increase (if the transmission is not continuous) or
decrease (the data is transmitted at a too high speed) the value.
2-339
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is determined by the minimum theoretical speed
Reason
of a single GPRS PDCH.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.19 Flow control mode

Full Name
Flow control mode
Abbreviated Name
FlowCtrlMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
BSC has different flow control modes to report flow control

parameters to SGSN. The modes are as follows:
1: Mode 1: Report flow control parameters according to actual traffic
on radio interface counted at BSC;
2: Mode 2: Report flow control parameters according to max traffic
that the cell can provide;
3: Mode 3: Flow mode 1 is used when CBL is over some limited
high threshold,flow mode 2 is used when CBL is lower than some
limited low threshold
"Flow control mode 1 parameter" is enabled if selecting "mode 1";
"Flow control mode 2 parameter" is enabled if selecting "mode 2".
Instance
BSC
Related FG
1..3
Unit
N/A
Default Value
3
2-340
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For Ericsson devices, use mode 1. For HW devices, use mode 2.
Mode 3 is based on mode 1 and mode 2.
Compared with modes 1 and 2, for mode 3, flow control is better
Reason
adapted for the Gb interface. You are recommended to use mode 3.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.6.20 PFC support

Full Name
PFC support
Abbreviated Name
PFCSupport
Managed Object

3GPP Name
PFC
3GPP Reference
N/A
2-341
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is broadcast through SI13, PSI1, and PSI13

messages.
In EGPRS system with broadband features, the QoS concept of
UMTS has been imported, which enables transferring the negotiable
QoS configuration to BSS through Gb interface.
BSS can maintain QoS subscribing information through function
PFC (packet flow context) flow, which include acquiring QoS,
modifying QoS, and deleting QoS signaling flow. Network notifies
MS if the network supports PFC flow through the system message
parameter PFC_FEATURE_MODE. If yes, the MS will add PFI
when establishing uplink TBF (PACKET RESOURCE REQUEST).
BSS can decide QoS as MS requires according to PFI.
Instance
BSC
Related FG

0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
To enable or disable this function, adjust this function based on the
settings of the CN.
By default, it is disabled.
Reason
Change take effect
Reset signal BVC
No
Access
Read/Write
OMC Access path

2-342
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.6.21 Net operation mode

Full Name
Net operation mode
Abbreviated Name
NMO
Managed Object

3GPP Name
NMO
3GPP Reference
N/A
Description
There are three network operation modes:

Network Operation Mode 1: The network sends to the
"GPRS-attached" MS the CS paging message on the same channel
of GPRS paging channel (packet or CCCH paging channel), or
on the GPRS traffic channel (when it is assigned with a packet
data channel). Mode 1 indicates that MS only need to monitor one
paging channel.
Network operation mode 1 is required while configuring PBCCH; Gs
interface is required while configuring network operation mode 1.
"GPRS-attached" MS the CS paging message on the CCCH paging
channel, which is also for GPRS paging. Mode 2 indicates that the
MS only need to monitor CCCH paging channel, but when BSC
allocates a packet data channel, the CS paging message uses the
CCCH paging channel.
"GPRS-attached" MS the CS paging message on the CCCH paging
channel, and sends the GPRS paging message either on the packet
paging channel (if there is any in the cell) or on the CCCH paging
channel. Mode 3 indicates that the MS must monitor two paging
channels (if packet paging channel is available in the cell) in order to
receive CS or GPRS paging message.
Instance
BSC
Related FG
ZGB-03-05-009 Network Mode of Operation (NMO) 1~3
0: Net operation mode 1

2-343
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
This parameter is set to network operation mode 1 if Gs interface
and PBCCH are configured.

This parameter is set to network operation mode 2 if no Gs interface
or PBCCH is configured.
This parameter is set to network operation mode 3 if no Gs interface
exists but PBCCH is configured. In this mode, the MS needs to
monitor the packet paging channel and the CCCH paging channel
at the same time.
The default value is set according to the configuration of the
Reason
PBCCH, Gb interface, and Gs interface.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.22 Page coordination support

Full Name
Page coordination support
Abbreviated Name
PagCoordination
Managed Object

2-344
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
BSS_PAGING_COORDINATION
3GPP Reference
N/A
Description
This parameter determines whether the cells of a BSC support CS

paging coordination. It is broadcast in GPRS CELL options through
SI13, PSI1, and PSI13, as specified in the protocol 04.60 12.24.
This parameter is invalid in case of network operation mode 1.
Paging coordination allows the network to send a CS paging
message to the MS on PACCH when the MS is in PS transfer mode.
Instance
BSC
Related FG
ZGO-02-01-001 Paging Coordination
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is configured depending on whether the MS in PS
transfer mode needs to process CS pagings and is concerned about

PS service failure. If this function is enabled, a PS call drop occurs
when the MS processes a CS paging. If this function is disabled, the
CS paging is invalid when the MS is in PS transfer mode.
The default value is set depending on whether GPRS is supported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-345
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.23 NACC support

Full Name
NACC support
Abbreviated Name
NACCSupport
Managed Object

3GPP Name
NACC
3GPP Reference
N/A
Description
This parameter indicates whether Network Assisted Cell

Change(NACC) is enabled.
For the MS, NACC is part of the GERAN Feature Package 1. The
function includes:
1. The MS in PS transfer mode can receive the system information
required for accessing the new cell.
2. The MS notifies the network (CCN mode) when deciding to
perform a cell reselection.
Therefore, NACC needs to be used together with CCN mode.
For the network, the NACC function includes:
1. The network may also send neighbour cell system information
on PACCH to be used by the mobile station at initial access after
cell re-selection.
2. When the network receives a PACKET CELL CHANGE
NOTIFICATION message from the mobile station, the network
may respond by sending neighbour cell system information for the
proposed cell or another cell and also complete the transmission of
ongoing data packets before sending a PACKET CELL CHANGE
CONTINUE message (to confirm the proposed cell) or a PACKET
CELL CHANGE ORDER message.
When NACC is used together with CCN, Packet (P)SI Status
functions, the cell reselection time can be reduced.
Instance
BSC
Related FG
ZGO-02-02-010 Network-assisted Cell Change
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
CCNActive
SIStatusInd
CCNSupport
2-346
SJ-20140527134815-013|2015-03-10(R1.1)
CCNActive, SIStatusInd, and CCNSupport must be enabled at the
Parameters
same time.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the NACC-related functions are enabled, the interval for
reselecting cells can be reduced, the impacts on PS services can

be reduced, and thus PS service rate can be increased. You are
recommended to enable this function.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.24 LLC Transfer for SAPI0(Reserved)

Full Name
LLC Transfer for SAPI0(Reserved)
Abbreviated Name
LLCTranSAPI0
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-347
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies whether the BSC supports the LLC frame
transfer function for SAPI0 (Reserved) services. Generally, this
function is not enabled for this type of data. The purpose of this
function is to transfer the LLC frames from the source cell cache
to the target cell when an MS performs cell reselection. This can
ensure the continuity of downlink data after cell reselection.
Instance
BSC
Related FG
ZGO-02-02-015 Enhanced Cell Reselection Procedure
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
For services indicated by SAPIs 3, 5, 9, and 11, this function should
be enabled. If the SAPI is 1, the frame transfer function for the GMM
signaling should not be enabled because the GMM signaling timer
and retransmission protection mechanisms are configured, and the
length of the signaling frames is short. Other services (indicated by
other SAPI values) are seldom used. Therefore, the LLC frame
transfer function should be disabled.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2-348
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.25 LLC Transfer for SAPI1(LLGMM)

Full Name
LLC Transfer for SAPI1(LLGMM)
Abbreviated Name
LLCTranSAPI1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
transfer function for SAPI1 (LLGMM) services. Generally, this
function is not enabled for the GMM signaling. The purpose of this
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
2-349
SJ-20140527134815-013|2015-03-10(R1.1)
Yes
Access
Read/Write
OMC Access path

N/A
2.6.26 LLC Transfer for SAPI2(TOM2)

Full Name
LLC Transfer for SAPI2(TOM2)
Abbreviated Name
LLCTranSAPI2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
transfer function for SAPI2 (TOM2) services. Generally, this function
is not enabled for TOM2 services. The purpose of this function is
to transfer the LLC frames from the source cell cache to the target
cell when an MS performs cell reselection. This can ensure the
continuity of downlink data after cell reselection.
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-350
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
Yes
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.6.27 LLC Transfer for SAPI3(User-Data)

Full Name
LLC Transfer for SAPI3(User-Data)
Abbreviated Name
LLCTranSAPI3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
transfer function for SAPI3 (User-Data) services. Generally, this
function is enabled for user data. The purpose of this function is to
transfer the LLC frames from the source cell cache to the target
Instance
BSC
Related FG

2-351
SJ-20140527134815-013|2015-03-10(R1.1)
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
LLCTranSAPI4
Managed Object
2-352
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
Yes
Access
Read/Write
2-353
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A

Full Name
Abbreviated Name
LLCTranSAPI5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-354
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
LLCTranSAPI6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
transfer function for SAPI6 (Reserve) services. Generally, this
Instance
BSC
Related FG
2-355
SJ-20140527134815-013|2015-03-10(R1.1)
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.6.31 LLC Transfer for SAPI7(LLSMS)

Full Name
LLC Transfer for SAPI7(LLSMS)
Abbreviated Name
LLCTranSAPI7
Managed Object
2-356
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
transfer function for SAPI7 (LLSMS) services. Generally, this
function is not enabled for LLSMS services. The purpose of this
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
Yes
Access
Read/Write
2-357
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.6.32 LLC Transfer for SAPI8(TOM8)

Full Name
LLC Transfer for SAPI8(TOM8)
Abbreviated Name
LLCTranSAPI8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
transfer function for SAPI8(TOM8) services. Generally, this function
is not enabled for TOM8 services. The purpose of this function is
to transfer the LLC frames from the source cell cache to the target
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-358
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
LLCTranSAPI9
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
2-359
SJ-20140527134815-013|2015-03-10(R1.1)
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
LLCTranSAPI10
Managed Object
2-360
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
function is disabled for this type of data. The purpose of this function
is to transfer the LLC frames from the source cell cache to the target
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
Yes
Access
Read/Write
2-361
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A

Full Name
Abbreviated Name
LLCTranSAPI11
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-362
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
LLCTranSAPI12
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
2-363
SJ-20140527134815-013|2015-03-10(R1.1)
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
LLCTranSAPI13
Managed Object
2-364
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
Yes
Access
Read/Write
2-365
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A

Full Name
Abbreviated Name
LLCTranSAPI14
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-366
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
LLCTranSAPI15
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
2-367
SJ-20140527134815-013|2015-03-10(R1.1)
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.6.40 RIM support

Full Name
RIM support
Abbreviated Name
RIMSupport
Managed Object
2-368
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
RIM
3GPP Reference
N/A
Description
This parameter indicates whether the RIM function is enabled.

The RIM function refers to the quick reselection between BSCs
or between BSC and RNC. In BSC external Network Assisted
Cell Change (NACC), to accelerate the speed to access a new
cell during cell reselection for the MS, BSC sends the new cell
system messages to the MS when it is in source cell before the cell
reselection. This reduces the time for listening to complete system
messages after the MS reselects the new cell.
To obtain system messages of a cell out of the BSC, the external
NACC needs the RAN Information Management (RIM) process
between SGSN and BSC.
When an BSC supports the RIM function, service triggers BSC
to obtain, store and update the system messages of external cell
through the RIM process. Accordingly, when the RIM function is
supported, the BSC also needs to provide the system messages
of its cells and notifies the message changes to corresponding
BSCs/RNCs, if requested by other BSCs/RNCs.
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
RIMRetryTimes
If this parameter is set to "On", you can set the "RIMRetryTimes"
Parameters
parameter.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter should be enabled if the external NACC function
is enabled. After the parameter is enabled, system messages of

the cells out of the BSC can be obtained through the RIM process
between the SGSN and the BSC to accelerate the speed to access
a new cell during cell reselection for an MS.
2-369
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.41 RIM retry times

Full Name
RIM retry times
Abbreviated Name
RIMRetryTimes
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of RIM retries. The maximum

number of RIM retries is 3.
Instance
BSC
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
DTMSupport
If the "RIMSupport" parameter is set to "On", you can set the
Parameters
"RIMRetryTimes" parameter.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-370
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is used if the "RIMSupport" parameter is enabled.
The RIMSupport function cannot be used unless the CN supports

it. You are not recommended to enable it.
If the "RIMSupport" parameter is set to "Off", the value of this
Reason
parameter is 0 by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.42 TBF establish support

Full Name
TBF establish support
Abbreviated Name
TBF_EST
Managed Object

3GPP Name
TBF_EST
3GPP Reference
N/A
Description
This parameter determines whether BSC supports TBF

establishment process. TBF flow establishment refers to while
releasing uplink TBF, to determine if new uplink TBF shall be
established immediately for CTRL_ACK field in Packet Control
Acknowledgement message.
Instance
BSC
Related FG
N/A
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
DTMHandoverSupp
2-371
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If this function is enabled, when an uplink TBF is being released, the
last uplink block is used by the phone to indicate whether to upload

data continuously. If data needs to be uploaded continuously, a new
uplink is created immediately by using this function. Because some
phones do not support this function completely, set the parameter
based on the phones used in the network.
Some phones do not support this function.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.43 Signal extended uplink TBF support

Full Name
Signal extended uplink TBF support
Abbreviated Name
SIGNAL_EUTBF
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-372
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether the extended uplink TBF is

supported for a signalling TBF. This switch is valid when the switch
of extended uplink TBF is enabled. The signaling TBF refers to a
TBF established for transmitting GMM signalling.
Instance
BSC
Related FG
ZGB-03-05-014 Delayed TBF Release in UL
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The signaling TBF transmission is very fast. You can set whether
to support the extended uplink TBF based on the signaling TBF

transmission status. For networks that require high downloading
speed, you are recommended to enable this function.
It is not a basic function. By default, this function is disabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.44 Highest coding scheme of POC service in GPRS

2-373
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Highest coding scheme of POC service in GPRS
Abbreviated Name
pocAttSeltG
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the highest-order encoding mode that can

be used for POC service by a GPRS-attached MS.
Instance
BSC
Related FG
N/A
0: CS1(CS1)
1: CS2(CS2)
2: CS3(CS3)
3: CS4(CS4)
Unit
N/A
Default Value
Related Parameters
PocSupport
If the switch for optimizing the POC service is enabled, this
Parameters
parameter is effective.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
By using the default value, on the one hand, the service rate
is guaranteed, on the other, the POC stable transmission is

guaranteed in most radio scenarios. If the parameter is set to a
smaller value, the POC service transmission is more stable, but the
service rate is reduced. If the parameter is set to a greater value,
the POC service rate is improved, but the POC service transmission
stability in some poor radio scenarios is reduced.
The default value is determined for reliable signal data transmission.
Reason
Change take effect
No
2-374
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.6.45 Highest coding scheme of POC service in EGPRS

Full Name
Highest coding scheme of POC service in EGPRS
Abbreviated Name
pocAttSeltE
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the highest-order encoding mode that can

be used for POC service by an EGPRS-attached MS.
Instance
BSC
Related FG
N/A
4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
10: MCS7
11: MCS8
12: MCS9
Unit
N/A
Default Value
Related Parameters
PocSupport
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-375
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
By using the default value, on the one hand, the service rate
is guaranteed, on the other, the POC stable transmission is

guaranteed in most radio scenarios. If the parameter is set to a
smaller value, the POC service transmission is more stable, but the
service rate is reduced. If the parameter is set to a greater value,
the POC service rate is improved, but the POC service transmission
stability in some poor radio scenarios is reduced.
The default value is determined for reliable signal data transmission.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.46 Support of enhanced radio status procedures

Full Name
Support of enhanced radio status procedures
Abbreviated Name
EnRadioStu
Managed Object

3GPP Name
Enhanced Radio Status feature
3GPP Reference
N/A
2-376
SJ-20140527134815-013|2015-03-10(R1.1)
Description
On the basis of Radio Status, enhanced Radio Status reports three

more cause values:
x02: indicates the enhanced Radio Status process is used when
the cell reselection occurs. Usually, it helps satisfy the service
requirement to the maximum extent.
x03: indicates the enhanced Radio Status process is used when the
MS is required to perform cell reselection and LLC frame transfer is
not supported.
x04: indicates that SGSN is notified when BSC detects cell
reselection failure.
SGSN has the following responses:
When Radio Status with the cause value x02 is received, the
downlink LLC frame sending is resumed after cell reselection is
completed.
When Radio Status with the cause value x03 is received, either
the downlink data sending is resumed after cell reselection is
completed,
or Radio Status with other cause values are received.
When Radio Status with the cause value x04 is received, if
there are data to be sent to MS, then the downlink LLC frame
sending is resumed.
With Radio Status that supports multiple cause values, SGSN
can better understand the status of MS, which avoids sending data
to the old cell blindly.
Instance
BSC
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
sendRadioStatus
The RadioStatus in the GBMsgSndInd must be enabled
Parameters
simultaneously. After this parameter is enabled, the function is

effective.
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
2-377
SJ-20140527134815-013|2015-03-10(R1.1)
If the Enhanced Radio Status function is enabled and negotiated
and operate with the SGSN, downlink data can be suspended and
resumed when a cell is reselected, which improves network QoS. If
this function is enabled on the SGSN side, you are recommended to
enable it on the BSC side.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.47 Support of PFC flow control procedures

Full Name
Support of PFC flow control procedures
Abbreviated Name
PFCFlowCtrl
Managed Object

3GPP Name
PFC-FC
3GPP Reference
N/A
Description
PFC flow control occurs at Gb interface between SGSN and BSS,

and only in downlink. BSS provides control parameters and SGSN
executes. It helps avoid a PFC in BSS discarding some LLC data
due to timeout caused by grouping channels being too busy (too
many LLC frame buffers) and avoid discarding new downlink LLC
data due to limited memory resource (overflow of LLC frame buffer).
The BSSGP process at the BSS side periodically measures the
current leakage ratio of MS. When the statistic timer overflows, the
'PFC Flow Control' process is initiated unconditionally.
This parameter is supported from version 6.20.21.
Instance
BSC
2-378
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
Enable or disable this function based on the settings of the CN.
The default value is set based on whether this function is supported
Reason
by the CN.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.48 PS handover support

Full Name
PS handover support
Abbreviated Name
psHoSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-379
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determine whether PS handover is supported.
Instance
BSC
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is not provided in this version. The parameter is set
to 0 (Not Support).
This function is not provided in this version. The parameter is set
Reason
to 0 (Not Support).
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.49 Max of sending PS handover required

Full Name
Max of sending PS handover required
Abbreviated Name
psHoReqMaxNum
Managed Object

2-380
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter represents the maximum number of sending the PS

Handover Required message during PS handover. The message
is sent again after expire of T12PsHo timer.
Instance
BSC
Related FG
1..6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
In normal cases, you do not need to modify the value. Parameters
related to PS handover are not used in commercial offices.
The default value is set based on the experience of inter-process
Reason
between two network elements.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.50 Enable PS Handover Indications in Inter-BSS

handover
2-381
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Enable PS Handover Indications in Inter-BSS

handover
Abbreviated Name
enablePSHoIndi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether PS Handover Indications is

contained in the PS handover message.
Instance
BSC
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
needed.
By default, this parameter is enabled, which reduces the time
Reason
required by PS handover among BSSs.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-382
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.51 Request SI/PSI

Full Name
Request SI/PSI
Abbreviated Name
enableRequestPSI
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the PS Handover message

contains the request for BSC to respond for the SI/PSI information.
Instance
BSC
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
needed.
By default, this parameter is enabled, which reduces the PS
Reason
handover time.
Change take effect
No
Access
Read/Write
OMC Access path

2-383
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.6.52 Service UTRAN CCO support

Full Name
Service UTRAN CCO support
Abbreviated Name
PSUTRANCCOSupp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
It describes whether 2G/3G priority selection control is supported

during PS handover or reselection.
The SGSN can add the Service UTRAN CCO information in such
messages as PS Handover Request, Create BSS PFC, or DL
UnitData PDU to indicate for the BSC whether 3G is preferred, not
preferred, or forbidden during PS handover and reselection.
Instance
BSC
Related FG
N/A
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
CCOStrategy
The CCOStrategy parameter also provides the 2G/3G priority
Parameters
selection control function. Its function is the same as this parameter.
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
This parameter is not used in this version. CCOStrategy can also
provide the 2G/3G priority selection control function.
Reason
Change take effect
No
2-384
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.6.53 FANR in TBF support

Full Name
FANR in TBF support
Abbreviated Name
TBFFanrSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BSC supports fast ACK/NACK

reporting (FANR) function. If both the network and MS support this
function, the MS can add the DL radio block reception information
in the UL radio block, and the network can add the UL radio block
reception information in the DL radio block. In this way, the MS
and network can be informed timely of the reception of UL and DL
radio blocks, thus quickening the re-transmission of UL and DL radio
blocks that are not properly received.
Instance
BSC
Related FG
ZGO-03-06-002 FANR
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-385
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
Yes
If the FANR function is needed on one side, enable it on this side. If
it is not needed, disable it.
This is a new function. By default, it is not enabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.54 DLDC support

Full Name
DLDC support
Abbreviated Name
DLDCSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the downlink dual-carrier function

is supported.
This is one of the EDGE evolution functions. If this function is
enabled, the GERAN carriers of two independent frequency points
(or different MAIO values in the case of frequency hopping) can be
received by the same terminal. This function is developed on the
basis of multi-timeslot technology, and the difference between them
is that multi-timeslot allocation can span multiple carriers.
Instance
BSC
Related FG
ZGO-03-06-004 DLDC
2-386
SJ-20140527134815-013|2015-03-10(R1.1)
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.55 RTTI support

Full Name
RTTI support
Abbreviated Name
RTTISupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-387
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether the Reduced Transmission Time

Interval (RTTI) function is supported.
RTTI is a concept relative to BTTI. Basic Transmission Time Interval
(BTTI) means that four consecutive Bursts are used on a channel to
transmit a radio block, and it takes 20 ms to transmit a radio block.
For RTTI, two consecutive Bursts on two channels (PDCH-pair)
respectively are used, and it takes only 10 ms to transmit a radio
block.
Instance
BSC
Related FG
ZGO-03-06-001 RTTI
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-388
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.56 EGPRS2-A support

Full Name
EGPRS2-A support
Abbreviated Name
EGPRS2_ASupp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether EGPRS2-A is supported.

EGPRS2-A is the phase-I implementation of EGPRS2. In this phase,
16QAM, 32QAM, and Turbo code are used, QPSK and 1.2-multiple
symbol rate are not used. Also, DAS and UAS modulation coding
scheme are used.
Instance
BSC
Related FG
ZGO-03-06-005 EGPRS2-A
0: Not Support
Unit
N/A
Default Value
Related Parameters
EGPRS2AInitAttSelt_0
If this parameter is enabled, the EGPRS2AInitAttSelt_0 parameter
Parameters
is effective.
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read
2-389
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.100/V6.30.100
N/A
2.6.57 EGPRS prior to GPRS Support

Full Name
EGPRS prior to GPRS Support
Abbreviated Name
EGPRSAllocPri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether EGPRS is prior to GPRS. After

this function is enabled, in case that the EGPRS and GPRS share
the same channel, the system adjusts the number of allocated
blocks for EGPRS and GPRS in accordance with the allocating
weight of EGPRS.
This parameter is available in V6.20.614b and later versions.
Instance
BSC
Related FG
ZGO-01-02-005 Flexible EGPRS scheduling priority
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-390
SJ-20140527134815-013|2015-03-10(R1.1)
After this function is enabled, when the EGPRS and GPRS share

weight of EGPRS. Whether to enable this function is determined by
the onsite requirement.
This parameter is a feature switch. The default value is 0.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.6.58 Allocating weights of EGPRS

Full Name
Allocating weights of EGPRS
Abbreviated Name
EGPRSAllocW
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the allocating weights of EGPRS. When

the EGPRS prior to GPRS function is supported, the system adjusts
the number of blocks allocated to EGPRS and GPRS according
to this allocating weight.
If the value is 0, EGPRS service fails to get blocks. If the value is
100, GPRS service fails to get blocks.
Instance
BSC
Related FG
0..100
Unit
N/A
2-391
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the EDGE and the GPRS share the same channel, the great the
parameter value, the more blocks allocated to the EDGE subscriber,

and thus the rate is increased. The smaller the parameter value, the
less blocks allocated to the EDGE subscriber, and thus the rate is
decreased. This parameter is effective for both the dynamic and
static data service channel.
The default value is used based on the speeds of both the EDGE
Reason
and the GPRS in the BSC.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.59 Choose PS route by NSVC

Full Name
Choose PS route by NSVC
Abbreviated Name
PSRouteByNSVC
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-392
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether to choose PS route by NSVC. It is

meaningful only when multiple IPGB boards exist on site.
If BSC supports choosing route by NSVC, an IPGB board can send
NS-ALIVE message through itself and thus individually detects its
NSVC status. At the same time, the user plane selects the NSVC
in normal route status to provide service. If BSC does not support
choosing route through NSVC, the IPGB board sends the NS-ALIVE
message through another board and thus does not individually
detect the route status of NSVC.
Instance
BSC
Related FG
ZGO-05-04-002 Gb over IP
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function should be enabled in the following case: the Gb
interface uses the load sharing mode, and the BSC is configured
with multiple IPGB boards. Each board is connected with a router
or switch, and there is only one remote destination IP address for
the SGSN.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-393
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.60 Enable PS Uplink Power Control In Establishment Phase

Full Name
Enable PS Uplink Power Control In Establishment Phase
Abbreviated Name
PSUlPwrCtlInEsta
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BSS writes the uplink power
control information in the IMMEDIATE ASSIGNMENT message after
receiving a CHANNEL ACCESS REQUEST message from the MS.
Instance
BSC
Related FG
ZGO-04-02-016 PS Power Control
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
UlPwCtrl
When UlPwCtrl is set to 1, this parameter is effective.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If all uplink data blocks in the TBF procedure need to be controlled,
set the parameter to 1.
The default value is set to 0 to avoid the impact on the success ratio
Reason
of uplink TBF link establishment.
Change take effect
No
Access
Read/Write
OMC Access path

2-394
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.6.61 DTM Enhance Capability

Full Name
DTM Enhance Capability
Abbreviated Name
DTMEnhanceCapa
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the BSC supports enhanced

DTM functions. If yes, the MS establishes the DTM service without
releasing the current PS service.
Instance
BSC
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
GDTM.DTMEnhanceCapa
If the DTMEnhanceCapa switch at cell level is enabled, this
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter should be set in accordance with the setting of the
DTM and whether this version supports this function.
This function is not provided in this version.
Reason
Change take effect
No
2-395
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.6.62 Enable PCU resource alarm

Full Name
Enable PCU resource alarm
Abbreviated Name
PcuResAlarmEnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable the UPPB resource

alarm function. The availability of UPPB board resources can be
measured through the availability of each DSP resource on UPPB
board. The measured indexes include failure ratio for allocating
memory, use ratio for MAC instance, use ratio for BSSGP instance,
use ratio of mac-tlli index, use ratio for bssgp-tlli index, use ratio for
radio channel instance, and use ratio for TS instance.
Instance
BSC
Related FG
N/A
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-396
SJ-20140527134815-013|2015-03-10(R1.1)
If you do not need this function, set this parameter to 0. If you need
this function, set the parameter to 1.
By default, this parameter is enabled to monitor the usage of UPPB
Reason
DSP resources. In case of a congestion, maintenance personnel

can adjust the configuration of PCU resources accordingly.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.63 E-UTRAN CCN support

Full Name
E-UTRAN CCN support
Abbreviated Name
EUtranCCN
Managed Object

3GPP Name
E-UTRAN_CCN_ACTIVE
3GPP Reference
N/A
Description
This parameter determines whether to enable the CCN function

between a GSM cell and an adjacent LTE cell.
Instance
BSC
Related FG
ZGO-02-03-008 GSM/LTE cell reselection
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-397
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is not provided in this version. You are recommended
to disable this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.64 DTM Handover Support

Full Name
DTM Handover Support
Abbreviated Name
DTMHandoverSupp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether DTM handover is supported.

When this function is enabled, the BSC can provide simultaneous
CS and PS handover for DTM subscribers, improving the service
continuity for DTM mode.
This function can only be used when the DTM function is enabled.
Instance
BSC
Related FG
ZGO-02-02-017 DTM Handover
0: No
1: Yes
2-398
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
DTMSupport
When DTMSupport is open,this parameter isvalid
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function should be enabled based on whether the DTM function
is enabled and whether this function is required. If this function is

enabled, the service continuity in DTM mode is improved.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.6.65 Continue with CS HO While PS HO is failure in DTM HO

Full Name
Continue with CS HO While PS HO is failure in DTM HO
Abbreviated Name
DTMHoCsHoCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether CS handover can be continued

when PS handover fails during a DTM handover.
2-399
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
ZGO-02-02-017 DTM Handover
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
DTMHandoverSupp
When DTMHandoverSupp is open,this parameter isvalid
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured depending on whether the DTM
function and the DTM handover function are enabled and whether
this function is required. If this function is enabled, CS handover can
be continued when PS handover fails.
Generally, CS handover must be continued when PS handover fails.
Reason
Therefore, the default value is set to "Yes".
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.6.66 Send suspend message when GPRS suspension

Full Name
Send suspend message when GPRS suspension
Abbreviated Name
ResumeSetOpt
Managed Object
2-400
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
Default value of resumesetopt is 0, that means: when PS service

is suspended, the suspend message isnt sent in Gb interface, the
voice channel release message informs MS that its resumed and
doesnt need to send RA update process resume.
When resumesetopt is 1, that means: when PS service is
suspended, the suspend message is sent in Gb interface, the voice
channel release message informs MS that it isnt resumed and
needs to send RA update process resume.
If resumesetopt is 0,and resumemax isnt 3, that means: when
PS service is suspended, the suspend message isnt sent in Gb
interface, the voice channel release message informs MS that its
resumed and doesnt need to send RA update process resume, a
resume message is sent in Gb after the voice channel is released.
Its used for test.
Instance
BSC
Related FG
N/A
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
To inform the SGSN suspension, modify the parameter to 1 and
at the same time, increase the RA update quantity in the system.

To test the Gb interface to inform the SGSN resumption with a
Resume message, modify the parameter to 0 and at the same time,
resumemax must not be 3.
When PS service is suspended, the suspend message isnt sent in
Reason
Gb interface, the voice channel release message informs MS that

its resumed and doesnt need to send RA update process resume,
to reduce the number of RA updates.
2-401
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.6.67 Send by SNDCP indicator

Full Name
Send by SNDCP indicator
Abbreviated Name
SNDCPSendInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to rank the LLC frames by SNDCP

number for transmission.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-402
SJ-20140527134815-013|2015-03-10(R1.1)
If the LLC frames need to be sequenced by SNDCP number, enable
this function. If not, disable this function.
By default, it is not enabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.68 TCP/IP performance enhance

Full Name
TCP/IP performance enhance
Abbreviated Name
TCPIPEnhance
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to analyze application layer data

and desert LLC frames received by the MS.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-403
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If this function is required, enable it. If not, disable it.
By default, it is not enabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.69 IP Segment Optimization

Full Name
IP Segment Optimization
Abbreviated Name
IPSegOpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether IP segment optimization is

enabled. The function is described as follows:
During the segmentation of LLC at the air interface, if the NU is
discontinuous, the current LLC will be transmitted with a 20-ms
delay.
Instance
BSC
Related FG
0: Not Support
1: Support
Unit
N/A
2-404
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the MS cannot resequence the LLC frames in the network, enable
this function.
The protocol requires that the MS needs to resequence the LLC
Reason
frames and then sends them in the sequence when they are
received by the Gb interface.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.70 Support resource optimizing by service

Full Name
Support resource optimizing by service
Abbreviated Name
SuppResOpByService
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable the function of

resource control based on the classification of subscriber services.
Instance
BSC
2-405
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
ZGO-01-02-007 Radio Resource Management Based on User

Priority and Service Type
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If this function is required on site, enable it.
The service type based resource control is disabled by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.71 Identify of special service

Full Name
Identify of special service
Abbreviated Name
SpecServiceIdentify
Managed Object

3GPP Name
N/A
2-406
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter determines which solution (DSCP or BSSGP) is

used to identify the specific service.
Instance
BSC
Related FG

0: DSCP
1: BSSGP extend
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
The solution to be used must be determined through negotiating
with the CN.
By default, the DSCP solution is used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.72 Extended uplink dynamic allocation support

Full Name
Extended uplink dynamic allocation support
2-407
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
ExUpDynSupport
Managed Object

3GPP Name
EXTENDED_DYNAMIC_ALLOCATION
3GPP Reference
N/A
Description
This parameter indicates if cell supports extended uplink dynamic

allocation. While using this function, the MS only need listen USF
allocation with the least timeslot, so you can determine to send
uplink block on all allocated uplink timeslot.
Instance
BSC
Related FG
ZGO-03-02-007 MAC Extended Dynamic Allocation
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
PsSupport
If the ExUpDynSupport parameter at cell level is enabled, this
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the MS supports this function, when the PS uplink data has priority
or the uplink radio resources are sufficient, you can enable this
function. After this function is enabled, the uplink transmission rate
is increased.
The default value is determined based on the radio resource usage
Reason
and PS traffic model.
Change take effect
No
Access
Read/Write
OMC Access path

2-408
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.6.73 Resource pool for PS rate

Full Name
Resource pool for PS rate
Abbreviated Name
PSAbisThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the upper limit of Abis resource proportion

in the Full Dynamic Abis Resource Pool that can be assigned to PS
services. If the limit is exceeded, the remaining idle Abis resources
cannot be assigned to PS services.
The proportion of Abis resources used for PS services = number
of Abis resources Assigned to PS services / total Abis resources
available in the resource pool
Instance
BSC
Related FG
ZGO-03-03-001 Full Dynamic Abis Allocation
0..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If PS services are more used in the cell, you can increase this
value a little. Ensure that the value should not be greater than 90.
If the PS services is less used, and the Abis resources are not
sufficient, CS services should be guaranteed with precedence. You
can decrease the value.
2-409
SJ-20140527134815-013|2015-03-10(R1.1)
If this parameter is set to 80, Abis resources can be allocated
Reason
relatively evenly to PS and CS services. In this case, CS services

are given a specified degree of priority.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.74 Max users of POC service on shared PS channel uplink

Full Name
Max users of POC service on shared PS channel uplink
Abbreviated Name
psCapaThsUl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the upper limit of PoC service subscribers

in shared uplink channel.
If dedicated PoC channel is configured, it indicates the upper limit of
PoC subscribers on the uplink of each dedicated PoC channel. If it
exceeds this number, PoC subscriber access is not allowed on the
uplink of this dedicated PoC channel.
Instance
BSC
Related FG
N/A
2..6
Unit
N/A
Default Value
Related Parameters
PocSupport
Parameters
2-410
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the maximum number of subscribers to the largest extent
under the condition that the reliable signal data transfer speed is
guaranteed.
The default value is set for reliable signal data transfer speed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.75 Max users of POC service on shared PS channel downlink

Full Name
Max users of POC service on shared PS channel downlink
Abbreviated Name
psCapaThsDl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the upper limit of PoC service subscribers

in shared downlink channel.
If dedicated PoC channel is configured, it indicates the upper limit of
PoC subscribers on the downlink of each dedicated PoC channel.
If it exceeds this number, PoC subscriber access is not allowed on
the downlink of this dedicated PoC channel.
Instance
BSC
Related FG
N/A
2-411
SJ-20140527134815-013|2015-03-10(R1.1)
2..6
Unit
N/A
Default Value
Related Parameters
PocSupport
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the maximum number of subscribers to the largest extent
under the condition that the reliable signal data transfer speed is
guaranteed.
The default value is set for reliable signal data transfer speed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.76 Optimized POC service support

Full Name
Optimized POC service support
Abbreviated Name
POCSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-412
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates if PoC subscriber applies for dedicated

POC channel. PoC indicates Push to talk over Cellular. Consider
the MS with proper function as walkie-talkie. This kind of MS
has a talkie key. After pressing this key, you can talk with other
subscribers or in a group.
Instance
BSC
Related FG
N/A
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Based on the requirements for the PoC service in the network. If
special processing is required for the PoC service, set the functions
that support the PoC service.
The default value is determined by the PoC service requirement.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.6.77 IP abis pool bandwidth restore support

2-413
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
IP abis pool bandwidth restore support
Abbreviated Name
bwRestore
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to support the compression and

restoration of the user plane codec mode according to bandwidth
usage.
Instance
BSC
Related FG
ZGB-03-01-005 Transmission Based Congestion Control
0: Disable
1: Enable
2: User Transplant Control
3: User Priority Control
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Whether to enable this parameter is determined by subscriber
requirements based on the onsite bandwidth configuration and

usage of the bandwidth.
It is an option. By default, it is disabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-414
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.6.78 Max LLC num that per bssgp may save

Full Name
Max LLC num that per bssgp may save
Abbreviated Name
buffMaxLLCFrameNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of Logic Link Control

(LLC) frames that can buffered by a BSSGP instance during a PS
service procedure, to prevent the instance from occupying too many
User Blocks (UBs).
Instance
BSC
Related FG
N/A
10..255
Unit
N/A
Default Value
254
Related Parameters
LLCTranSAPI0
LLCTranSAPI1
LLCTranSAPI2
LLCTranSAPI3
LLCTranSAPI4
LLCTranSAPI5
LLCTranSAPI6
LLCTranSAPI7
LLCTranSAPI8
LLCTranSAPI9
LLCTranSAPI10
LLCTranSAPI11
LLCTranSAPI12
LLCTranSAPI13
LLCTranSAPI14
LLCTranSAPI15
2-415
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the available UBs on the
user plane processing board and the transmission of LLC frames

over the Gb interface.
This default value is set according to the available UBs on the user
Reason
plane processing board and the transmission of LLC frames over

the Gb interface.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.6.79 Max LLC num that per bssgp may transfer

Full Name
Max LLC num that per bssgp may transfer
Abbreviated Name
tranMaxLLCFrameNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-416
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When an MS makes a cell reselection to a cell during a PS service

procedure, the LLC frames in the previous cell are transferred to
the target cell. This parameter indicates the maximum number of
LLC frames that can be transferred by a BSSGP instance. If the
number of LLC frames in the previous cell exceeds the number, the
remaining LLC frames are discarded.
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
120
Related Parameters
LLCTranSAPI0
LLCTranSAPI1
LLCTranSAPI2
LLCTranSAPI3
LLCTranSAPI4
LLCTranSAPI5
LLCTranSAPI6
LLCTranSAPI7
LLCTranSAPI8
LLCTranSAPI9
LLCTranSAPI10
LLCTranSAPI11
LLCTranSAPI12
LLCTranSAPI13
LLCTranSAPI14
LLCTranSAPI15
This parameter can be used only when the related parameters are
Parameters
used.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the traffic on the network
interface of the user plane processing board and the number of LLC
frames transmitted over the Gb interface.
This default value is set according to the traffic on the network
Reason
interface of the user plane processing board and the number of LLC
frames transmitted over the Gb interface.
Change take effect
2-417
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.6.80 RRM threshold

Full Name
RRM threshold
Abbreviated Name
RRMThreshold
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ratio of Abis resources that need

dynamic management.
Instance
BSC
Related FG
N/A
0..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to a smaller value when sufficient
resources are available.
2-418
SJ-20140527134815-013|2015-03-10(R1.1)
This default value is set according to the recommendation that 50%
Reason
resources are controlled by Radio Resource Management (RRM)

and the other resources are used in a preemption manner.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.6.81 Parameter of Flow control mode 1

Full Name
Parameter of Flow control mode 1
Abbreviated Name
FlowCtlMode1Para
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In flow control mode 1, the BSC reports the flow control parameter
in accordance with the actual traffic statistics on the radio interface.
However, the traffic statistics is lower than the actual traffic due to
data retransmission on the radio interface and TBF failures. This
parameter specifies a coefficient that is multiplied with the traffic
statistics to determine the flow control parameter reported by the
BSC.
Instance
BSC
Related FG
1..100
Unit
N/A
Default Value
2-419
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
This parameter takes effect when flow control is enabled.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the flow control result of
the CN. If the actual traffic rate in case of the default parameter value
influences the transmission of downlink data, this parameter can be
adjusted to a larger value when data transmission is not continuous
or to a smaller value when the transmission speed is too high.
The default value is set to adjust the parameter used in flow control
Reason
mode 1 in accordance with the network condition.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.6.82 Parameter of Flow control mode 2

Full Name
Parameter of Flow control mode 2
Abbreviated Name
FlowCtlMode2Para
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-420
SJ-20140527134815-013|2015-03-10(R1.1)
Description
In flow control mode 2, the BSC reports the flow control parameter
in accordance with the highest traffic supported per cell. The highest
traffic is calculated by multiplying the number of configured channels
with the highest traffic per channel. This parameter indicates the
highest traffic supported per channel. The unit is 100 bps.
Instance
BSC
Related FG
10..1000
Unit
100bps
Default Value
700
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the flow control result
of the CN. If the default setting of this parameter influences the

transmission of downlink data, this parameter can be adjusted to
a larger value when data transmission is not continuous or to a
smaller value when the transmission speed is too high.
This default value is set in accordance with the maximum theoretical
Reason
speed of a single GPRS channel.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-421
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.83 CBL in Bvc/MS flow control

Full Name
CBL in Bvc/MS flow control
Abbreviated Name
FlowCtrlCBLSupp
Managed Object

3GPP Name
CBL
3GPP Reference
N/A
Description
This parameter indicates whether the Current Bucket Level (CBL) is

reported through a BVC/MS flow control message.
This parameter is available in V6.20.21 and later versions.
Instance
BSC
Related FG
N/A
0..1
Unit
N/A
Default Value
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured depending on whether the CBL
reporting is supported during flow control of the CN.
The default value depends on whether the CN supports the CBL
Reason
reporting. If the CN supports the CBL reporting, this parameter must

be set to enable the BSC to report the CBL to the SGSN through
a flow control message.
Change take effect
No
Access
Read/Write
2-422
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.103/V6.30.103
N/A
2.6.84 Coefficient of Bvc bucket size

Full Name
Coefficient of Bvc bucket size
Abbreviated Name
BvcBucketPara
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a coefficient used to calculate the BVC bucket

size. The parameter value can be adjusted to change the BVC
bucket size and adjust the deviation in flow control.
Instance
BSC
Related FG
N/A
10..20000
Unit
N/A
Default Value
1200
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-423
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is configured according to the actual flow control
result in the CN. If the default setting of this parameter influences

the transmission of downlink data, this parameter can be adjusted
to a smaller value when the bucket size is too large, or to a larger
value when the bucket size is too small.
This default value is set according to the default flow control period.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.6.85 Coefficient of MS bucket

Full Name
Coefficient of MS bucket
Abbreviated Name
MSBucketPara
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a coefficient used to calculate the size of the

actual MS bucket. The parameter value can be adjusted to change
the MS bucket size and adjust the deviation in flow control.
Instance
BSC
Related FG
N/A
10..20000
Unit
N/A
Default Value
200
2-424
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the actual flow control
result in the CN. If the default setting of this parameter influences

the transmission of downlink data, this parameter can be adjusted
to a smaller value when the bucket size is too large, or to a larger
value when the bucket size is too small.
This default value is set according to the default flow control period.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.6.86 Enable implicit reject with paging

Full Name
Enable implicit reject with paging
Abbreviated Name
SuppPagImpltRej
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-425
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether the paging message contains the

implicit reject indication field. This field determines whether an MS
supporting implicit rejection needs to initiate an implicit rejection
procedure when initiating an access request.
Instance
BSC
Related FG
ZGO-01-02-006 M2M Device Access Control
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set to 1 when the implicit rejection indication is
required in the paging message. Or else, this parameter is set to 0.
This feature is disabled by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.6.87 Implicit reject CS and PS with paging

Full Name
Implicit reject CS and PS with paging
Abbreviated Name
PagImpltRejCsPs
2-426
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the implicit reject indication field carried by

paging messages, which determines whether CS and PS services
of an MS with low access priority are implicitly rejected.
Instance
BSC
Related FG
0: not implicit reject CS and PS

1: implicit reject PS
2: implicit reject CS
3: implicit reject CS and PS
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the requirement for
implicit rejection of low-priority CS and PS services.
This default value is set according to the importance of services and
Reason
the principle of rejecting low-priority services in case of congestion.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-427
SJ-20140527134815-013|2015-03-10(R1.1)
2.6.88 PS service Bar when Gb break

Full Name
PS service Bar when Gb break
Abbreviated Name
CellPSBarGbDown
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the affected cell notifies the

related MS of PS inaccessible when the Gb interface connection is
broken. The notification feature protects the system against the
impact caused by invalid PS service requests.
Instance
BSC
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This feature can be enabled as required.
This feature is disabled unless specially required.
Reason
Change take effect
No
Access
Read/Write
2-428
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.6.89 Throughput of IPGB

Full Name
Throughput of IPGB
Abbreviated Name
IPGbThroughput
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the allowed total (uplink and downlink)

throughput on the Gb (Gb over IP) interface. If the actual throughput
is over the threshold, no new service is accessed.
Instance
BSC
Related FG
1..65535
Unit
64kbps
Default Value
65535
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If flow control is required, the throughput threshold is set based
on the license.
The default value is 65535, which means no flow control on the
Reason
Gb interface. If flow control is required, the throughput threshold is

set based on the license.
Change take effect
2-429
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.6.90 alive time of early downlink tbf

Full Name
alive time of early downlink tbf
Abbreviated Name
DlEarlyEstAliveTime
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the live time of downlink pre-established

TBF when there is no downlink data.
Instance
BSC
Related FG
ZGO-03-05-010 Early TBF Establishment Downlink
100..4000
Unit
ms
Default Value
550
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If you need to increase the success rate of pre-established downlink
TBF, you can increase this parameter but the invalid occupation time
of radio resources will be longer.
2-430
SJ-20140527134815-013|2015-03-10(R1.1)
This default value is set according to the empirical value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.6.91 enable slave self recovering

Full Name
enable slave self recovering
Abbreviated Name
EnSlaveSelfRecover
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to allow the

automatic recovery when the Slave is abnormal.
Instance
BSC
Related FG
N/A
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-431
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
Yes
If Slave self-healing is required on site, you can enable this function.
By default, this feature is disabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.6.92 Paging Send by NSE

Full Name
Paging Send by NSE
Abbreviated Name
PagingNSE
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The SGSN sends a paging PDU to every NSEI of an RAI. This

parameter indicates a switch for PS paging based on NSE. If the
BSC initiates a paging request based on RAI, the paging messages
are doubled. If the BSC initiates a paging request based on NSEI,
paging messages are decreased, reducing the BTS load. When the
PagingNSE switch is enabled, for the PS paging based on RAI, the
PS paging messages are sent by finding the corresponding site and
cell in accordance with RAI+SGSNID+NSEI.
Instance
BSC
Related FG
N/A
2-432
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In the case of multiple NSEs or single NSE in the multiple offices, to
increase the paging efficiency and decrease the paging load, you
can enable this switch. It is recommended to enable both of this
parameter and the PagingNSE parameter.
This parameter is configured based on the paging efficiency.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.6.93 Frequency band supported by MS check indication used

for Co-BCCH
Full Name
Frequency band supported by MS check indication used for

Co-BCCH
Abbreviated Name
FreqBandCheck
Managed Object

2-433
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that checks whether the MS

supports the frequency band during the resource allocation based
on subcells. 0: not check, 1: check.
Instance
BSC
Related FG
ZGO-05-02-009 Concentric Circle Technology
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
As most of networks do not support the single-frequency MS, this
parameter is set to 0 by default. The default value may lead to a

link establishment failure when the subcells are allocated based on
access conditions and cell load, but can avoid subcells congestions.
If the subcell resource is sufficient, you can enable this switch to
increase the establishment success rate.
The default value of this parameter keeps the same with the version
Reason
that does not have such a switch.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-434
SJ-20140527134815-013|2015-03-10(R1.1)
2.7 Common Measure and Information

Exchange(GCommMeas)
2.7.1 Common Measure and Information Exchange ID
Full Name
Common Measure and Information Exchange ID
Abbreviated Name
GCommMeasId
Managed Object
Common Measure and Information Exchange(GCommMeas)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an ID for a common measurement and

information exchange.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
2-435
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Information Configuration->Common Measure and Information
Exchange
N/A
2.7.2 Report characteristics

Full Name
Report characteristics
Abbreviated Name
ReportType
Managed Object

3GPP Name
Report characteristics
3GPP Reference
N/A
Description
This parameter indicates the report method of measurement reports,

including:
1 On Demand
2 Periodic
7 Event E
Instance
BSC
Related FG

1: On Demand
2: Period
7: Event E
Unit
N/A
Default Value
Related Parameters
IurgOf2gReq
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-436
SJ-20140527134815-013|2015-03-10(R1.1)
The measurements are reported through the Iur-g interface. If
the load of the peer end needs to be reported constantly, set the
parameter to 2 Periodic. If measurements need to be reported
under specified conditions, set the parameter to 7 Event E. If
measurements are reported once, set the parameter to 1 On
Demand.
This parameter is set based on experiences.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.3 Measurement Load Threshold 1

Full Name
Measurement Load Threshold 1
Abbreviated Name
measThrLoad1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold 1 for reporting Load with

the Event E method. The load is reported when the Load value
exceeds this threshold.
Instance
BSC
Related FG

0..100
Unit
2-437
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
50
Related Parameters
IurgOf2gReq,ReportType
Function related parameters
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If you want to make the reporting of measurements more sensitive,
decrease the threshold. Otherwise, increase the threshold.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.4 Measurement RT Load Threshold 1

Full Name
Measurement RT Load Threshold 1
Abbreviated Name
measThrRtLoad1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold 1 for reporting RT Load with

the Event E method. The load is reported when the RT Load value
exceeds this threshold.
2-438
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG

0..100
Unit
Default Value
50
Related Parameters
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.5 Measurement NRT Load Threshold 1

Full Name
Measurement NRT Load Threshold 1
Abbreviated Name
measThrNrtLoad1
Managed Object

2-439
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold 1 for reporting NRT Load

with the Event E method. The load is reported when the NRT Load
value exceeds this threshold.
Instance
BSC
Related FG

0..3
Unit
N/A
Default Value
Related Parameters
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.6 Measurement Load Threshold 2

2-440
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Measurement Load Threshold 2
Abbreviated Name
measThrLoad2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold 2 for reporting Load with

the Event E method. The load is stopped reporting when the Load
value drops below this threshold.
Instance
BSC
Related FG

0..100
Unit
Default Value
40
Related Parameters
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
increase the threshold. Otherwise, decrease the threshold.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
2-441
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.7.7 Measurement RT Load Threshold 2

Full Name
Measurement RT Load Threshold 2
Abbreviated Name
measThrRtLoad2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold 2 for reporting RT Load with

the Event E method. The load is stopped reporting when the RT
Load value drops below this threshold.
Instance
BSC
Related FG

0..100
Unit
Default Value
40
Related Parameters
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-442
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.8 Measurement NRT Load Threshold 2

Full Name
Measurement NRT Load Threshold 2
Abbreviated Name
measThrNrtLoad2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold 2 for reporting NRT Load

with the Event E method. The load is stopped reporting when the
NRT Load value drops below this threshold.
Instance
BSC
Related FG

0..3
Unit
N/A
Default Value
Related Parameters
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
2-443
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.9 Report periodicity unit

Full Name
Report periodicity unit
Abbreviated Name
RepPeriodUnit
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the unit of load report period when

common measurement is periodical.
1: 10 ms
2: 1 Min
Instance
BSC
Related FG

1: 10 ms(10 ms)
2: 1 Min(1 Min)
Unit
N/A
Default Value
Related Parameters
N/A
Parameters
Value Type
long
Parameter Type
2-444
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
In normal cases, a short reporting period can reflect the load of the
peer end in real time. If the load does not need to be reported in real
time, you can set the reporting unit to minutes.
For periodic reporting, set the unit to seconds.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.10 Report Periodicity Value

Full Name
Report Periodicity Value
Abbreviated Name
RepPeriodValue
Managed Object

3GPP Name
Report Periodicity Value
3GPP Reference
N/A
Description
This parameter indicates the load report period when common

measurement is periodical.
If RepPeriodUnit is 1, the step is 10ms, the value range is 1-6000.
If RepPeriodUnit is 2, the step is 1Min, the value range is 1-60.
Instance
BSC
Related FG

{RepPeriodUnit==1}[1..6000],
{RepPeriodUnit==2}[1..60]
2-445
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
{RepPeriodUnit==1}100,
{RepPeriodUnit==2}1
Related Parameters
RepPeriodUnit
If RepPeriodUnit is set to 1, the step is 10 ms, and the range is
Parameters
1-6000. If RepPeriodUnit is set to 2, the step is 1 min, and the

range is 1-60.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If you want to set the reporting interval to second or lower, set
RepPeriodUnit to 1, and set the range. 1 to 6000 corresponds to 10

ms to 60 seconds. If you want to set the reporting interval to minute,
set RepPeriodUnit to 2, and set the range. 1 to 60 corresponds
to 1 min to 60 min.
The load is reported at 1 second intervals when unit step is 10ms,at
Reason
1 minute interval when unit step is 1min.
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.11 Measurement Hysteresis Time

Full Name
Measurement Hysteresis Time
Abbreviated Name
MeasHys
Managed Object

2-446
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
Measurement Hysteresis Time
3GPP Reference
N/A
Description
This parameter determines the delay time of reporting based on

event E. The system reports or stops reporting measurement reports
after this delay time when the corresponding conditions are met.
Instance
Related FG
BSC
1..6000
Unit
N/A
Default Value
100
Related Parameters
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If you need to shorten this delay, decrease the value. Otherwise,
increase this value.
In normal cases, this parameter is set to 1s.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.12 Event Report Periodicity

2-447
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Event Report Periodicity
Abbreviated Name
EveRepPeriod
Managed Object

3GPP Name
Report Periodicity
3GPP Reference
N/A
Description
This parameter determines the period of reporting based on event E

when the event reporting conditions are met.
Instance
BSC
Related FG

1..6000
Unit
N/A
Default Value
100
Related Parameters
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set it as required.
Normally, the load is reported at 1 second interval.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2-448
SJ-20140527134815-013|2015-03-10(R1.1)
2.7.13 Information Report Type

Full Name
Information Report Type
Abbreviated Name
InfoReportType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines the information reporting mode. 1:

reported immediately; 3: reported after being modified
Instance
BSC
Related FG

1: On demand
3: Periodic
Unit
N/A
Default Value
Related Parameters
IurgOf2gReq
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If information is reported after the capacity of the peer end changes,
modify this parameter to 3.
Reason
Change take effect
No
Access
Read/Write
2-449
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Exchange
N/A
2.7.14 Measurement type

Full Name
Measurement type
Abbreviated Name
MeasType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the common measurement type.

2: Load
6: RT Load
7: NRT Load
Instance
BSC
Related FG

2: Load
6: RT Load
7: NRT Load
Unit
N/A
Default Value
Related Parameters
IurgOf2gReq
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Do not modify it.
2-450
SJ-20140527134815-013|2015-03-10(R1.1)
This interface is only provided for China Mobile. Therefore, set this
Reason
parameter according to the requirements of China Mobile.
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.15 Support of 2g request Iur-g

Full Name
Support of 2g request Iur-g
Abbreviated Name
IurgOf2gReq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a functional switch that determines whether the

BSC can obtain the information of Iur-g capacity and load from
the RNC. The original Iur-g functional switch still takes effect. It
controls whether the RNC obtains the capacity and load information
from the BSC.
The value 0 indicates that the BSC does not obtain data from the
RNC.
The value 1 indicates that the BSC obtains data from the RNC.
Instance
BSC
Related FG

0: Not Support
1: Support
Unit
N/A
Default Value
0
2-451
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Enable this parameter if the Iur-g interface needs to obtain 3G load.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.16 Not Real Time Load Overflow Threshold

Full Name
Not Real Time Load Overflow Threshold
Abbreviated Name
nrtOverflowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-452
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the overload threshold of non-real-time

services. When the load of non-real-time services is equal to or
higher than the threshold, it is considered that the cell is overloaded
with non-real-time services. Non-real-time services refer to PS
services. The load is calculated by dividing the number of occupied
PDCHs (including dynamic PDCHs and static PDCHs) by the
number of available PDCHs.
Instance
BSC
Related FG

1..99
Unit
Default Value
90
Related Parameters
IurgSupport
If IurgSupport is set to Yes, this parameter is effective.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher the value,the more possibly to be redirected to the cells
from RNC. You can modify this value based on this principle.
Ensure NRTThs_0>NRTThs_1>NRTThs_2.
If the radio resource usage exceeds 90%, the cell is overloaded
Reason
and the default value is set to 90.
Change take effect
Yes
Access
Read/Write
OMC Access path

Exchange
N/A
2-453
SJ-20140527134815-013|2015-03-10(R1.1)
2.7.17 Not Real Time Load High Threshold

Full Name
Not Real Time Load High Threshold
Abbreviated Name
nrtHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the upper overload threshold of

non-real-time services. When the load of non-real-time services is
equal to or higher than the threshold but lower than NRTThs_0, it
is regarded that the cell is high loaded with non-real-time services.
Non-real-time services refer to PS services.
The load is calculated by dividing the number of occupied PDCHs
(including dynamic PDCHs and static PDCHs) by the number of
available PDCHs.
Instance
BSC
Related FG

1..99
Unit
Default Value
60
Related Parameters
IurgSupport
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
from RNC. You can modify this value based on this principle.Ensure
NRTThs_0>NRTThs_1>NRTThs_2.
If the radio resource usage exceeds 60%, the cell is heavily loaded
Reason
and the default value is set to 60.
Change take effect
Yes
2-454
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Exchange
N/A
2.7.18 Not Real Time Load Low Threshold

Full Name
Not Real Time Load Low Threshold
Abbreviated Name
nrtLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the lower overload threshold of

non-real-time services. When the load of non-real-time services is
equal to or higher than the threshold but lower than NRTThs_1, it
is regarded that the cell is moderately loaded with non-real-time
services. Otherwise, the load of non-real-time services is regarded
low. Non-real-time services refer to PS services.
The load is calculated by dividing the number of occupied PDCHs
(including dynamic PDCHs and static PDCHs) by the number of
available PDCHs.
Instance
BSC
Related FG

1..99
Unit
Default Value
20
Related Parameters
IurgSupport
Parameters
Value Type
long
2-455
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
from RNC. You can modify this value based on this principle.Ensure
NRTThs_0>NRTThs_1>NRTThs_2.
If the radio resource usage is lower than 20%, the cell is slightly
Reason
loaded and the default value is set to 20.
Change take effect
Yes
Access
Read/Write
OMC Access path

Exchange
N/A
2.8 BSC Precise Paging

Configuration(GBssPrecisePaging)
2.8.1 BSC Precise Paging Configuration ID
Full Name
BSC Precise Paging Configuration ID
Abbreviated Name
GBssPrecisePagingId
Managed Object
BSC Precise Paging Configuration(GBssPrecisePaging)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a BSC precise paging configuration ID.
Instance
BSC
Related FG
N/A
2-456
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->BSC Precise Paging Configuration
N/A
2.8.2 Support Precise Paging

Full Name
Support Precise Paging
Abbreviated Name
precisePagSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-457
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines the switch of BSC exact paging. This

function indicates that the system performs paging in the cells
for exact paging. If the system does not reach any subscriber, it
performs paging within the range required by the core network.
The exact paging cells include the Visit Paging Cell (VPC) and
Home Paging Cell (HPC). The VPC indicates a cell around the cell
where the last service exists. It can be a handover or reselection
adjacent cell, or can be configured additionally. The HPC indicates
a group of cells calculated based on the cells where latest services
are triggered.
Instance
BSC
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
CsPrecisePaging
PsPrecisePaging
The precise paging function is used only when the BSC-level and
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is used in scenarios where a large number of paging
operations must be performed and CCCH channels need to be

saved.
This function is seldom used currently. In addition, the related data
Reason
needs to be configured for this function.
Change take effect
No
Access
Read/Write
OMC Access path

2-458
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.8.3 Use HPC for Precise Paging

Full Name
Use HPC for Precise Paging
Abbreviated Name
precisepagUseHpc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If this parameter is set to "No", only the VPC is used for exact
paging. If this parameter is set to "Yes", both the VPC and HPC
are used for exact paging.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For areas where subscribers are relatively stable, for example,
residential area, HPV can be used.
HPC is not required by most carriers. It is an optional function.
Reason
Change take effect
No
2-459
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.8.4 Adopt Precise Paging for repaging of Circuit Switched Service

Full Name
Adopt Precise Paging for repaging of Circuit Switched Service
Abbreviated Name
csRepagPrecise
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The core network may initiate a paging procedure again if no

response to the first CS paging is received. This parameter
determines whether the precise paging policy is used for the
subsequent CS paging procedure in the core network.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the requirement of the
operator. If the operator allows a long connection duration, the

precise paging policy can be enabled.
2-460
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is set to "No" because the probability of receiving
Reason
a response from the MS is low when the precise paging policy is

used during the repeated paging, which results in an excessively
long paging duration.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.8.5 Adopt Precise Paging for repaging of Packet Switched Service

Full Name
Adopt Precise Paging for repaging of Packet Switched Service
Abbreviated Name
psRepagPrecise
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The core network may initiate a paging procedure again if no

response to the first PS paging is received. This parameter
determines whether the precise paging policy is used for the
subsequent PS paging procedure in the core network.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-461
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the requirement of the
operator. If PS paging is initiated for non-real-time services, or for

real-time services but a long connection duration is acceptable, the
precise paging policy can be enabled.
The default value is set to "No" because the probability of receiving
Reason
a response from the MS is low when the precise paging policy is

used during the repeated paging, which results in an excessively
long paging duration.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.8.6 Allow Exceed area Precise Paging for Circuit Switched

Service
Full Name
Allow Exceed area Precise Paging for Circuit Switched Service
Abbreviated Name
csOutAreaPag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the exact paging of CS service

covers the cells out of the paging range of core network. The paging
of CS service is usually applied for location cells. However, some
VPCs and HPCs may not in these location cells.
2-462
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the location is updated, and the BSC cannot obtain the subscriber
IMSI and thus cannot record the location of the subscriber, this
parameter can be enabled.
When an MS roams to a new paging area (location area or routing
Reason
area), it informs of the network. Therefore, if the CN pages an

MS that is out of the paging range, it is less possibility to obtain a
response. In addition, the paging traffic is increased, which brings
no benefits.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.8.7 Allow Exceed area Precise Paging for Packet Switched

Service
Full Name
Allow Exceed area Precise Paging for Packet Switched Service

2-463
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
psOutAreaPag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the exact paging of PS service

covers the cells out of the paging range of core network. The paging
of PS service is usually applied for routing cells. However, some
VPCs and HPCs may not in these routing cells.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the routing area is updated, and the BSC cannot obtain the
subscriber IMSI and thus cannot record the location of the

subscriber, this parameter can be enabled.
When an MS roams to a new paging area (location area or routing
Reason
area), it informs of the network. Therefore, if the CN pages an

MS that is out of the paging range, it is less possibility to obtain a
response. In addition, the paging traffic is increased, which brings
no benefits.
Change take effect
No
Access
Read/Write
2-464
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.8.8 Paging Repeat Time for Circuit Switched Service

Full Name
Paging Repeat Time for Circuit Switched Service
Abbreviated Name
csPagingRepeatTime
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines the maximum retry times of CS service

paging (exact paging excluded).
When the first paging is not responded, the system can initiate
multiple paging operations according to the value of this parameter.
Instance
BSC
Related FG
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
If multiple paging operations are not applied in the core network,
you can set the system to perform multiple paging operations on

the BSC.
Normally, multiple paging operations are applied on the BSC only
Reason
when this function is not applied in the core network.
Change take effect
2-465
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.8.9 Paging Repeat Time for Packet Switched Service

Full Name
Paging Repeat Time for Packet Switched Service
Abbreviated Name
psPagingRepeatTime
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines the maximum retry times of PS service

paging (exact paging excluded).
When the first paging is not responded, the system can initiate
multiple paging operations according to the value of this parameter.
Instance
BSC
Related FG
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
2-466
SJ-20140527134815-013|2015-03-10(R1.1)
If multiple paging operations are not applied in the core network,
you can set the system to perform multiple paging operations on

the BSC.
Normally, multiple paging operations are applied on the BSC only
Reason
when this function is not applied in the core network.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.9 BSC Reserved Configuration(GBssFunctionRsv)

2.9.1 Global Reserved Parameter 1
Full Name
Global Reserved Parameter 1
Abbreviated Name
reserved1
Managed Object
BSC Reserved Configuration(GBssFunctionRsv)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-467
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Information Configuration->BSC Reserved Configuration
N/A

Full Name
Abbreviated Name
reserved2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
2-468
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
0
2-469
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
2-470
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..255
2-471
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
2-472
SJ-20140527134815-013|2015-03-10(R1.1)
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
2-473
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

2-474
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved9
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-475
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
BSC
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved10
Managed Object

3GPP Name
N/A
2-476
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved11
Managed Object

2-477
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved12
Managed Object

2-478
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved13
2-479
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name

2-480
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
reserved14
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

2-481
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
reserved15
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-482
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved16
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..4294967295
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-483
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved17
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..4294967295
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-484
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved18
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..4294967295
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-485
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved19
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..4294967295
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-486
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved20
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..4294967295
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-487
SJ-20140527134815-013|2015-03-10(R1.1)
2.10 External GSM Cell

Configuration(GExternalGsmCell)
2.10.1 External GSM Cell ID
Full Name
External GSM Cell ID
Abbreviated Name
GExternalGsmCellId
Managed Object
External GSM Cell Configuration(GExternalGsmCell)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an external GSM cell ID.
Instance
BSC
Related FG
N/A
1..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
2-488
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path
GUI: Managed Element->GSM Logical Configuration->External

Resource Configuration->External GSM Cell Configuration
N/A
2.10.2 Cell Identity

Full Name
Cell Identity
Abbreviated Name
cellIdentity
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
To uniquely identify each cell in a GSM PLMN, the operator allocates

a unique ID for each cell in the same location area. This parameter
indicates the unique cell ID in a location area.
Instance
Cell
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured based on radio network planning.
N/A
Reason
Change take effect
No
2-489
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.10.3 BCCH arfcn

Full Name
BCCH arfcn
Abbreviated Name
bcchFrequency
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ARFCN of the BCCH carrier in the cell.
Instance
Cell
Related FG
N/A
0..1023
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
2-490
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.10.4 NCC
Full Name
NCC
Abbreviated Name
ncc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
NCC is one of the composition parts of Base Station ID Code (BSIC)

(BSIC = NCC + BCC). which is used to enable the MS to distinguish
adjacent and different GSM PLMN cells. Normally, adjacent
operators shall have different NCCs. The parameter related to NCC
is "NccPermitted" of the cell. By prohibiting MS to report related
NCC in the cell, MS is prohibited to measure the cell information of
the related operators. Actually, NCC occupies three bits. NCC is
one of the network identification parameters.
Instance
Cell
Related FG
N/A
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-491
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.5 BCC
Full Name
BCC
Abbreviated Name
bcc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
BCC is one of the composition parts of Base Station ID Code

(BSIC) (BSIC = NCC + BCC). Normally, BCC is used to enable
MS to distinguish adjacent cells with the same BCCH carrier
frequency and belonging to the same GSM PLMN. In addition,
the GSM specifications stipulate that the TSC (Training Sequence
Code) of the broadcast control channel of a cell shall be equal to
the cell BCC. BCC occupies three bits BCC is one of the network
identification parameters.
Instance
Cell
Related FG
N/A
0..7
2-492
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.6 LAC (LAC)

Full Name
LAC (LAC)
Abbreviated Name
lac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-493
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Each GSM PLMN is divided into many location areas (LAs) in order
to determine the MS location, the location area code identifies the
different location areas. LAC comes under LAI (LAI = MCC + MNC
+ LAC). One location area contains multiple cells.
This parameter is consistent with the data at CN side.
Instance
Cell
Related FG
N/A
1..65533,65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.7 MCC
Full Name
MCC
Abbreviated Name
mcc
2-494
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
MCC consists of three digits of decimal number. It is used to

uniquely identify the home country of the mobile user (or system).
Instance
Cell
Related FG
N/A
0..999
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.8 MNC
2-495
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
MNC
Abbreviated Name
mnc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
MNC consists of three digits of decimal number. It uniquely identifies

a specific PLMN network in a country (determined by MCC).
Instance
Cell
Related FG
N/A
0..999
Unit
N/A
Default Value
Related Parameters
MNCBcdCodeLen
If the MNCBcdCodeLen parameter is set to 2 digits, the length of the
Parameters
MNC is 2 bits. If the MNCBcdCodeLen parameter is set to 3 digits,

the length of the MNC is 3 bits. If the MNC3Digits parameter is set
to 2 or 3 bits, the length of the MNC can be 2 bits or 3 bits.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-496
SJ-20140527134815-013|2015-03-10(R1.1)
2.10.9 FreqBand
Full Name
FreqBand
Abbreviated Name
freqBand
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequency band of the system.
Instance
Cell
Related FG
N/A
0: GSM900\(1..124\)(GSM900\(1..124\))
1: EGSM900\(0 .. 124,975 .. 1023\)(EGSM900\(0..124,975..1023\))
2: DCS1800\(512 .. 885\)(DCS1800\(512..885\))
4: PCS1900\(512 .. 810\)(PCS1900\(512..810\))
7: GSM850\(128..251\)(GSM850\(128..251\))
Unit
N/A
Default Value
Related Parameters
bcchFrequency
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
2-497
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.10.10 Cell type

Full Name
Cell type
Abbreviated Name
cellType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the GERAN External Cell type.
Instance
Cell
Related FG
N/A
0: Umbrella Cell
1: Macro Cell
2: Micro Cell)
3: Micro-micro Cell
4: Extended Cell
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This field only identifies the type of an external adjacent cell. It does
not affect services.
N/A
Reason
Change take effect
2-498
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.10.11 GPRS service support

Full Name
GPRS service support
Abbreviated Name
psSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter describes whether the external cell supports GPRS.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
PsSupport
If psSupport is set to Not Support, GPRS is not supported. The
Parameters
system automatically changes the PS channels in the cell to TCH

channels.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the adjacent cell supports GPRS, this cell can be selected when a
GPRS service cell needs to be reselected.

2-499
SJ-20140527134815-013|2015-03-10(R1.1)
Normally, cell reselection is based on GSM cells instead of GPRS.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.12 Allow SOLSA MS to access

Full Name
Allow SOLSA MS to access
Abbreviated Name
exc_acc
Managed Object

3GPP Name
EXC_ACC
3GPP Reference
N/A
Description
This parameter specifies whether to allow SoLSA MSs to access the

system. It is broadcast to the MS in the PSI3 and PSI3bis system
messages when PBCCH is configured. When the PBCCH does
not exist, the parameter is sent to specified MSs via the PACKET
CELL CHANGE ORDER message or PACKET MEASUREMENT
ORDER message on the PACCH.
The parameter is is used by the network to prevent mobiles without
exclusive access rights from camping on the cell. Support of
Localized Service Area (SoLSA) is a local service provided by a cell
or a series of cells which can be either under continuous coverage
or not.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
2-500
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set it based on the carrier's requirements.
Normally, the MSs without the SoLSA exclusive access rights are
Reason
allowed to camp in the cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.13 LSA ID
Full Name
LSA ID
Abbreviated Name
lsa_Id
Managed Object

3GPP Name
LSA ID
3GPP Reference
N/A
Description
This parameter indicates the LSA ID of the MS. It is broadcast to

the MS via the SI4 message on the BCCH. Localised Service Area
(LSA): A localised service area consists of a cell or a number of
cells.The cells constituting a LSA may not necessarily provide
contiguous coverage.
2-501
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
ZGB-02-02-006 Cell Reselection
0..16777215
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is a network planning parameter. It does not need to be modified
after configuration.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.14 RAC (RAC)

Full Name
RAC (RAC)
Abbreviated Name
rac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-502
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Routeing Area Identity (RAI), defined by an operator, identifies one

or several cells. A Routeing Area is a subset of one, and only one,
Location Area (LA), meaning that an RA cannot span more than
one LA. An RA is served by only one SGSN.RAC is only unique
when presented together with LAI.RAI= MCC+MNC+LAC+RAC.MS
initiates Routing area update procedure after cell reselection if RAI
has changed.
The location of an MS in STANDBY state is known in the SGSN on
an RA level.The MS is paged for packet services in the RA where the
MS is located when mobile-terminated traffic arrives in the SGSN.
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is a network planning parameter. It does not need to be modified
after configuration.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-503
SJ-20140527134815-013|2015-03-10(R1.1)
2.10.15 Cell bar access 2

Full Name
Cell bar access 2
Abbreviated Name
cellBarAc2
Managed Object

3GPP Name
CELL_BAR ACCESS_2
3GPP Reference
N/A
Description
This parameter is broadcast to MSs. This parameter, together

with the system parameters CELL_BAR_ACCESS and
CELL_BAR_QULIFY, determines the cell reselection status. 0
indicates that the cell reselection is in normal status, and 1 indicates
that the cell reselection in Forbidden status. The relation between
the CBA2, cell reselection priority, and cell reselection status is
shown in table 1:
CELL_BAR ACCESS_2(CBA2) Cell reselection priority Cell
Reselection Status
No Yes Yes
Yes Forbidden Forbidden
Instance
Cell
Related FG
N/A
0..1
Unit
N/A
Default Value
Related Parameters
CellBarAccess
CellBarQualify
This parameter, CBQ, and CBA parameters together determine
Parameters
the cell reselection priority and the reselection status. For details,
refer to the following table: CBQ CBA Cell Reselection Priority Cell
Reselection Status
No No Normal Normal
No Yes Forbidden Forbidden
Yes No Low Normal (note)
Yes Yes Low Normal (note)
Note: There is one exception in the table. If all the following
conditions are met, the status of the cell reselection priority and
cell reselection should be normal.
? The cell and the MS belong to the same PLMN.
? The MS is in the cell test operation mode.
2-504
SJ-20140527134815-013|2015-03-10(R1.1)
? cellBarAc2 is set to Yes.

? cellBarQualify is set to No.
Access control level 15 is forbidden.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is related to the PBCCH configuration. It is not
recommended to use this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.16 GPRS access minimal signal level in idle

Full Name
GPRS access minimal signal level in idle
Abbreviated Name
rxLevAsMin1
Managed Object

3GPP Name
GPRS_RXLEV_ACCESS_MIN
3GPP Reference
N/A
2-505
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter used by the MS indicates the minimum Rx level

allowed the MS to access this system (GPRS). This parameter is
broadcast to the MSs by the BTS via the packet system messages
on the PBCCH.
The minimum Rx level is used to avoid unsatisfactory call quality
when MS access the system at too low a level, which is a waste of
system resources. This parameter (used for calculating C31 and
C32) is one of the decision-making criteria for cell selection and
reselection by the MS. It is used for the reselection in the idle state,
and is only valid when PBCCH is configured.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
12
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, it is recommended to set the minimum Rx level to a value
close to the receiver sensitivity of the MS. For a cell overloaded with
traffic, the minimum Rx level can be properly increased to decrease
the C1 and C32 values in the cell and reduce the effective coverage
of the cell. However, if the minimum Rx level is too high, it may
result in dead zones on the boundary between cells.
Generally, an Rx level no higher than -90 dBm is recommended
for traffic balancing. On the initial operation stage of the network,
this parameter can be set to 10 (-101 dBm to -100 dBm) or a lower
value, which is higher than the receiver sensitivity (-102 dBm) of
the MS. After the network capacity is expanded or major coverage
problems are resolved, this parameter can be increased by 2.
This parameter is related to the PBCCH configuration and the C31
Reason
and C32 criterions. It is not recommended to use the default value.
Change take effect
No
2-506
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.10.17 GPRS MAX initial access signal level in idle

Full Name
GPRS MAX initial access signal level in idle
Abbreviated Name
msTxmaxCch1
Managed Object

3GPP Name
GPRS_MS_TXPWR_MAX_CCH
3GPP Reference
N/A
Description
This parameter used by the MS indicates the maximum GPRS

initial access level. The parameter is broadcast to the MSs by the
BTS via the packet system messages on the PBCCH. It is used
for the reselection in the idle state, and is only valid when PBCCH
is configured.
During the communication between the MS and BTS, the
transmission power of MS is controlled by the network via the power
command. The MS must employ the Tx power specified by the
network as its output power. If the MS cannot produce the specified
output power, the output power closest to the specified value must
be employed.
This parameter (used for calculating C1 and C2) is one of the
decision-making criteria for cell selection and reselection by the MS.
The configuration principle is to minimize the access level of MS
when MSs at cell boundaries have a certain access success
rate. The recommended values are 5 (GSM900MS) and 2
(GSM1800MS). In application, set the parameter to a value, and
then perform call test at cell boundaries to decide whether to
improve or reduce the parameter value.
Instance
Cell
Related FG
0..31
2-507
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is too large, the MS that is closer to the BTS
interferes with adjacent channels. If the parameter value is too

small, the access success rate of the MS at the cell edge is low.
This parameter should be set in accordance with the following
principles: Under the condition that the access success rate of the
MS at the cell edge can be guaranteed, the MS's receiving level is
as small as possible. Obviously, the larger is the cell coverage, the
higher the MS transmission power will be. Generally, this parameter
is set to 5 (for a GSM900 MS) or 0 (for a GSM1800 MS).
In applications, a dialing test can be performed at the cell edge
after this parameter is set to test the MS's access success rate and
access time. The parameter value can be increased or reduced in
accordance with the test results.
Reason
and C32 criterions. It is not recommended to use the default value.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.18 Cell reselection offset in idle

2-508
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Cell reselection offset in idle
Abbreviated Name
reselOff1
Managed Object

3GPP Name
GPRS_RESELECT_OFFSET
3GPP Reference
N/A
Description
This parameter used by the MS indicates the GPRS reselection

offset. It is broadcast to the MSs by the BTS via the packet system
messages on the PBCCH. It is used for the reselection in the idle
state, and is only valid when PBCCH is configured. In the GPRS
system, C32 is employed as the criterion for cell reselection.
C32(s) = C1(s) (Serving cell)
C32(n) = C1(n) + GPRS_RESELECT_OFFSET(n) - TO(n) * (1-L(n))
(Neighbor cell)
In the above formula,
TO(n) = GPRS_TEMPORARY_OFFSET(n) *
H(GPRS_PENALTY_TIME(n) - T(n)).
L(n) = 0, when PRIORITY_CLASS(n) = PRIORITY_CLASS(s)
1, when PRIORITY_CLASS(n) PRIORITY_CLASS(s)
H(x) = 0, when x < 0
1, when x >= 0
Parameter description:
GPRS_RESELECT_OFFSET provides the offset and hysteresis
of each cell.
GPRS_TEMPORARY_OFFSET is a temporary reselection offset
which contributes a minus offset to C32. The validity duration is
decided by the cell reselection penalty time.
GPRS_PENALTY_TIME indicates the validity duration of the
temporary reselection offset (GPRS_TEMPORARY_OFFSET).
PRIORITY_CLASS indicates the HCS priority of the cell.
Instance
Cell
Related FG
0..31
Unit
2db
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-509
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater is the parameter value, the higher the access priority
of the cell will be. With a higher access priority, the cell is easier
to be selected by an MS.
Reason
and C32 criteria. It is not recommended to use this parameter.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.19 Cell reselection temporary offset in idle

Full Name
Cell reselection temporary offset in idle
Abbreviated Name
tempOffset1
Managed Object

3GPP Name
GPRS_TEMPORARY_OFFSET
3GPP Reference
N/A
Description

temporary offset. It is broadcast to the MSs by the BTS via
the packet system messages on the PBCCH. It is used for the
reselection in the idle state, and is only valid when PBCCH is
configured. In the GPRS system, C32 is employed as the criterion
for cell reselection.
(Neighbor cell)
2-510
SJ-20140527134815-013|2015-03-10(R1.1)
H(x) = 0, when x < 0
1, when x >= 0
of each cell.
decided by the cell reselection penalty time (penalTime1).
Instance
Cell
Related FG
0..7
Unit
db
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can prevent fast-moving MSs from performing
pingpong cell reselection. If the BCCH signal level of the cell does
not keep high enough for a specified time longer than PenaltyTime,
the MS does not select this cell. Based on this principle, this
parameter can be set to 60 (the GSM signal level is from 0 to 63).
Reason
Change take effect
No
2-511
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.10.20 Penalty time of cell reselection in idle

Full Name
Penalty time of cell reselection in idle
Abbreviated Name
penalTime1
Managed Object

3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
N/A
Description

penalty time. It is broadcast to the MSs by the BTS via the packet
system messages on the PBCCH. It is used for the reselection in
the idle state, and is only valid when PBCCH is configured. In the
GPRS system, C32 is employed as the criterion for cell reselection.
(Neighbor cell)
H(x) = 0, when x < 0
1, when x >= 0
of each cell.
decided by the cell reselection penalty time (penalTime1).
2-512
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..31
Unit
10s
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter depends on the coverage of this cell and MS moving
characteristics. If a fast-moving MS is not desired to camp on

a microcell, the larger the microcell coverage is, the higher the
value of penaltyTime should be set. For a usual microcell, it is
recommended to set this parameter to 20 seconds.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.10.21 HSC exist in idle

Full Name
HSC exist in idle
Abbreviated Name
hcs_Exist1
Managed Object
2-513
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used for reselection in the idle state, indicating

whether the Hierarchical Cell Structure (HCS) parameters exist in
the cell, including the HCS priority and HCS signal level threshold. If
the local cell does not use HCS parameters, the HCS parameters
are ignored in other cells. In this case, all cells use an infinite HCS
signal level threshold.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When different cell reselection priorities exist in the network, if
C31 is determined by the cell reselection priority and signal level

threshold, set this parameter to 1. For cells with the same cell
selection priority, C32 is used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-514
SJ-20140527134815-013|2015-03-10(R1.1)
2.10.22 Threshold of HSC signal level in idle

Full Name
Threshold of HSC signal level in idle
Abbreviated Name
hcs_Thr1
Managed Object

3GPP Name
HCS_THR
3GPP Reference
N/A
Description
This parameter is used by the MS for reselection in the idle

state when PBCCH is configured, indicating the Hierarchical Cell
Structure (HCS) signal level threshold in the cell. It is broadcast to
the MS by the BTS via system messages on the PBCCH.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is similar to the lowest access level. The lower the
threshold, the easier to access the cell. If you do not want an MS

to access the cell, increase the threshold.
Reason
Change take effect
No
Access
Read/Write
2-515
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.10.23 HCS priority in idle

Full Name
HCS priority in idle
Abbreviated Name
prioClass1
Managed Object

3GPP Name
PRIORITY_CLASS
3GPP Reference
N/A
Description
This parameter is used by the MS for reselection in the idle state

when PBCCH is configured, indicating the cell Hierarchical Cell
Structure (HCS) priority. It is broadcast by the BTS to the MS via
system messages on the PBCCH.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This higher the parameter value is, the higher the HCS cell priority is.
Reason
Change take effect
2-516
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.10.24 GPRS access minimal signal level in transfer

Full Name
GPRS access minimal signal level in transfer
Abbreviated Name
rxLevAsMin2
Managed Object

3GPP Name
3GPP Reference
N/A
Description
This parameter is used for reselection by the MS in the transfer

state, indicating the minimum Rx level allowed for the MS to access
this system (GPRS). This parameter is broadcast to the MSs by the
BTS via the packet system messages on the PACCH.
The minimum Rx level is used to avoid unsatisfactory call quality
when MS accesses the system at too low a level, which is a waste
of system resources. This parameter (used for calculating C31 and
C32) is one of the decision-making criteria for cell selection and
reselection by the MS. It is used for the reselection in the idle state,
and is only valid when PACCH is configured.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
12
Related Parameters
N/A
N/A
Parameters
2-517
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, it is recommended to set the minimum Rx level to a value
close to the receiver sensitivity of the MS. For a cell overloaded with
traffic, the minimum Rx level can be properly increased to decrease
the C1 and C32 values in the cell and reduce the effective coverage
of the cell. However, if the minimum Rx level is too high, it may
result in dead zones on the boundary between cells.
Generally, an Rx level no higher than -90 dBm is recommended
for traffic balancing. On the initial operation stage of the network,
problems are resolved, this parameter can be increased by 2.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.25 GPRS MAX initial access signal level in transfer

Full Name
GPRS MAX initial access signal level in transfer
Abbreviated Name
msTxmaxCch2
Managed Object

3GPP Name
3GPP Reference
N/A
2-518
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is used for reselection by the MS in the transfer

state, indicating the maximum GPRS initial access level. The
parameter is broadcast to the MSs by the BTS via the packet system
messages on the PACCH. It is only valid when PACCH is configured.
During the communication between the MS and BTS, the
transmission power of MS is controlled by the network via the power
command. The MS must employ the Tx power specified by the
network as its output power. If the MS cannot produce the specified
output power, the output power closest to the specified value must
be employed.
This parameter (used for calculating C1 and C2) is one of the
decision-making criteria for cell selection and reselection by the MS.
The configuration principle is to minimize the access level of MS
when MSs at cell boundaries have a certain access success
rate. The recommended values are 5 (GSM900MS) and 2
(GSM1800MS). In application, set the parameter to a value, and
then perform call test at cell boundaries to decide whether to
improve or reduce the parameter value.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

as small as possible. Obviously, the larger is the cell coverage, the
higher the MS transmission power will be. Generally, this parameter
is set to 5 (for a GSM900 MS) or 0 (for a GSM1800 MS).
In applications, a dialing test can be performed at the cell edge
after this parameter is set to test the MS's access success rate and
2-519
SJ-20140527134815-013|2015-03-10(R1.1)
access time. The parameter value can be increased or reduced in

accordance with the test results.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.26 Cell reselection offset in transfer

Full Name
Cell reselection offset in transfer
Abbreviated Name
reselOff2
Managed Object

3GPP Name
3GPP Reference
N/A
Description
This parameter is used for the reselection by the MS in the transfer

state, indicating the GPRS reselection offset. It is broadcast to the
MSs by the BTS via the packet system messages on the PACCH,
and is only valid when PACCH is configured. In the GPRS system,
C32 is employed as the criterion for cell reselection.
(Neighbor cell)
H(x) = 0, when x < 0
1, when x >= 0
2-520
SJ-20140527134815-013|2015-03-10(R1.1)
of each cell.
decided by the cell reselection penalty time.
Instance
Cell
Related FG
0..31
Unit
2db
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater is the parameter value, the higher the access priority
of the cell will be. With a higher access priority, the cell is easier
to be selected by an MS.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-521
SJ-20140527134815-013|2015-03-10(R1.1)
2.10.27 Cell reselection temporary offset in transfer

Full Name
Cell reselection temporary offset in transfer
Abbreviated Name
tempOffset2
Managed Object

3GPP Name
3GPP Reference
N/A
Description
This parameter is used for cell reselection, indicating the temporary

offset, which is broadcasted to the MS by the BTS through system
information on the PACCH. In a GPRS cell, the C32 criterion is used
C32(s) = C1(s) (serving cell)
C32(n) = C1(n) + GPRS_RESELECT_OFFSET(n) - TO(n) * (1-L
(n)) (neighbor cell)
Where,
L(n) = 0 if PRIORITY_CLASS(n) = PRIORITY_CLASS(s).
L(n) = 1 if PRIORITY_CLASS(n) PRIORITY_CLASS(s).
H(x) = 0 if x < 0.
H(x) = 1 if x > 0.
of each cell.
GPRS_TEMPORARY_OFFSET is a temporary reselection offset,
which adds a minus offset to C32. The validity duration is decided
by the cell reselection penalty time (penalTime1).
This parameter is used for cell reselection when the MS is in
transmission state.
Instance
Cell
Related FG
0..7
Unit
db
Default Value
Related Parameters
N/A
2-522
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can prevent fast-moving MSs from performing ping
pong cell reselection. If the BCCH signal level of the cell does not
keep high enough for a certain time longer than PenaltyTime, the
MS does not select this cell. Based on this principle, this parameter
can be set to 60 (the GSM signal level is from 0 to 63).
Reason
and C32 criterions. The default value is not recommended.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.28 Penalty time of cell reselection in transfer

Full Name
Penalty time of cell reselection in transfer
Abbreviated Name
penalTime2
Managed Object

3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
N/A
2-523
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is used for cell reselection, indicating the penalty

time, which is broadcasted to the MS by the BTS through system
information on the PACCH. In a GPRS cell, the C32 criterion is used
C32(s) = C1(s) (serving cell)
C32(n) = C1(n) + GPRS_RESELECT_OFFSET(n) - TO(n) * (1-L
(n)) (neighbor cell)
Where,
L(n) = 0 if PRIORITY_CLASS(n) = PRIORITY_CLASS(s).
L(n) = 1 if PRIORITY_CLASS(n) PRIORITY_CLASS(s).
H(x) = 0 if x < 0.
H(x) = 1 if x > 0.
of each cell.
GPRS_TEMPORARY_OFFSET is a temporary reselection offset,
which adds a minus offset to C32. The validity duration is decided
by the cell reselection penalty time (penalTime1).
transmission state.
Instance
Cell
Related FG
0..31
Unit
10s
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-524
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter depends on the actual coverage of this cell and
MS moving characteristics. If a fast-moving MS is not desired to

camp on a microcell, the larger the microcell coverage is, the higher
the value of penaltyTime should be set. For a usual microcell, it is
recommended to set this parameter to 20 s.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.10.29 HSC exist in transfer

Full Name
HSC exist in transfer
Abbreviated Name
hcs_Exist2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

transmission state, indicating whether the Hierarchical Cell Structure
(HCS) parameters exist in the cell, including the HCS priority and
HCS signal level threshold. If no HCS parameters are used in this
cell, they will not be used in other cells either. In this case, all cells
use an infinite HCS signal level threshold.
Instance
Cell
Related FG
0..1
Unit
N/A
2-525
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When different cell reselection priorities are set to cells, if C31 that
considers the cell reselection priority and signal level threshold is

sued, this parameter is set to 1.For cells with the same cell selection
priority, C32 is used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.30 Threshold of HSC signal level in transfer

Full Name
Threshold of HSC signal level in transfer
Abbreviated Name
hcs_Thr2
Managed Object

3GPP Name
HCS_THR
3GPP Reference
N/A
2-526
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is used by the MS for cell reselection when the

MS in transmission state, indicating the Hierarchical Cell Structure
(HCS) signal level threshold in the cell, which is broadcasted to the
MS by the BTS through system information on the PACCH.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter indicates the minimum access level of a cell. The
lower the threshold is, the cell is easier to be selected. If MSs are
not desired to select this cell, it is recommended to raise this level.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.10.31 HCS priority in transfer

Full Name
HCS priority in transfer
Abbreviated Name
prioClass2
2-527
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
PRIORITY_CLASS
3GPP Reference
N/A
Description
This parameter is used by the MS for cell reselection when the

MS in transmission state, indicating the Hierarchical Cell Structure
(HCS) priority in the cell, which is broadcasted to the MS by the BTS
through system information on the PACCH.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-528
SJ-20140527134815-013|2015-03-10(R1.1)
2.10.32 MAX power level of MS

Full Name
MAX power level of MS
Abbreviated Name
MsTxPwrMax
Managed Object

3GPP Name
MS_TXPWR_MAX
3GPP Reference
N/A
Description
During the communication between an MS and the BTS, the MS

transmission power is controlled by the network. The network sets
the power for the MS and sends the power-control command on the
SACCH (There are two bytes in the SACCH header. One byte is
used for power control, and the other is used for the timing advance
value).
The MS extracts the power control byte from the downlink SACCH
and transmits at the specified power value. If the MS cannot
transmit at the specified power value, it transmits at its maximum
value. During BSC power control, this parameter determines the
maximum transmission power available for an MS in the cell. In
addition, this parameter is used for the BSC to calculate PBGT.
Instance
Cell
Related FG
{freqBand==0}[0..31],
{freqBand==1}[0..31],
{freqBand==2}[0..31],
{freqBand==4}[0..31],
{freqBand==7}[0..31]
Unit
N/A
Default Value
{freqBand==0}5,
{freqBand==1}5,
{freqBand==2}0,
{freqBand==4}0,
{freqBand==7}5
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-529
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter should be set according to the maximum power of
the neighbor cell. In general, this parameter is set to 5 for a 900

MHz neighbor cell and 0 for a 1800 MHz neighbor cell.
This parameter indicates the maximum power of most MSs.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.10.33 RemoteSp DN
Full Name
RemoteSp DN
Abbreviated Name
refRemoteSp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of an adjacent BSC office.
Instance
External Cell
Related FG
ZGO-05-03-007 Soft Synchronization
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-530
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the planned value for
the network.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.10.34 Um soft Synchronous Support

Full Name
Um soft Synchronous Support
Abbreviated Name
UmSynSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables/disables the Um soft synchronous function.
Instance
External Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Gumsyn.UmSynSupport
2-531
SJ-20140527134815-013|2015-03-10(R1.1)
If Gumsyn.UmSynSupport is enabled, the external neighbor cell also
Parameters
supports air interface soft synchronization only when this parameter

is also configured.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Enabled when the air interface soft synchronization function is On.
This parameter is set to "No" by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.10.35 Routing Area Colour Code

Full Name
Routing Area Colour Code
Abbreviated Name
racc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a routing area color code.
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
2-532
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It should be set according to the actual conditions.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.11 External UTRAN FDD Cell

Configuration(GExternalUtranCellFDD)
2.11.1 External UTRAN FDD Cell ID
Full Name
External UTRAN FDD Cell ID
Abbreviated Name
GExternalUtranCellFDDId
Managed Object
External UTRAN FDD Cell Configuration(GExternalUtranCellFDD)

3GPP Name
N/A
3GPP Reference
N/A
2-533
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates an external UTRAN FDD cell ID.
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Resource Configuration->External UTRAN FDD Cell Configuration
N/A
2.11.2 CI
Full Name
CI
Abbreviated Name
ci
Managed Object

3GPP Name
N/A
2-534
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the Cell ID of a UTRAN FDD neighbor cell.
Instance
External Utran Neighbor Cell
Related FG
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be configured to the ID of the UTRAN FDD
neighbor cell.
Without default value, this parameter should be configured to the ID
Reason
of the UTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.11.3 MCC
Full Name
MCC
Abbreviated Name
mcc
Managed Object

2-535
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Mobile Country Code (MCC) of a

UTRAN FDD neighbor cell. The MCC is composed of three decimal
digits, uniquely identifying the country to which the MS or network
belongs.
Instance
Cell
Related FG
0..999
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the MCC of the UTRAN FDD
neighbor cell.
Without default value, this parameter must be configured to the
Reason
MCC of the UTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.11.4 MNC
2-536
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
MNC
Abbreviated Name
mnc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Mobile Network Code (MNC) of a

UTRAN FDD neighbor cell. The MNC is composed of three decimal
digits, uniquely identifying a PLMN in a country (determined by the
MCC).
Instance
Cell
Related FG
0..999
Unit
N/A
Default Value
Related Parameters
MNCBcdCodeLen
If MNCBcdCodeLen is set to 2, the length of the MNC can only be
Parameters
2. If MNCBcdCodeLen is set to 3, the length of the MNC can only

be 3. If MNC3Digits is set to 2 or 3, the length of the MNC can be
either 2 or 3.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the MNC of the UTRAN FDD
neighbor cell.
Without default value, this parameter should be configured to the
Reason
MNC of the UTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

2-537
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.11.5 RNC ID
Full Name
RNC ID
Abbreviated Name
rnc_id
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the RNC ID to which a UTRAN FDD

neighbor cell belongs.
Instance
Cell
Related FG
ZGO-02-03-009 Fast Return from GSM to WCDMA
0..4095
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the RNC ID to which the UTRAN
FDD neighbor cell belongs.
Reason
RNC ID to which the UTRAN FDD neighbor cell belongs.
Change take effect
No
Access
Read/Write
2-538
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.11.6 LAC (LAC)

Full Name
LAC (LAC)
Abbreviated Name
lac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Location Area Code (LAC) of a UTRAN

FDD neighbor cell. To locate an MS, a PLMN is divided into several
location areas. A location area is uniquely identified by the LAC in a
PLMN. The LAC is a part of an LAI (LAI = MCC + MNC + LAC).
Instance
Cell
Related FG
1..65533,65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the LAC of the UTRAN FDD
neighbor cell.
Reason
LAC of the UTRAN FDD neighbor cell.
Change take effect
2-539
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.11.7 UTRAN cell frequency

Full Name
UTRAN cell frequency
Abbreviated Name
arfcn3g
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequencies of a UTRAN FDD neighbor

cell.
Instance
Cell
Related FG
10562..10838,9662..9938,1162..1513,1537..1738,4357..4458,4387.
.4413,2237..2563,2937..3088,9237..9387,3112..3388,3712..3812,4
12,437,462,487,512,537,562,587,612,637,662,687,1887,1912,193
7,1962,1987,2012,2037,2062,2087,1007,1012,1032,1037,1062,1
087,1037,1062,2587,2612,2637,2662,2687,2712,2737,2762,2787
,2812,2837,2862,2887,2912,3412,3437,3462,3487,3512,3537,35
62,3587,3612,3637,3662,3687
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-540
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter is configured to the frequencies of the UTRAN FDD
neighbor cell.
Reason
frequencies of the UTRAN FDD neighbor cell.
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.11.8 Scrambling code

Full Name
Scrambling code
Abbreviated Name
scCode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the scrambling code of a UTRAN FDD

neighbor cell.
Instance
Related FG
0..511,65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-541
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the scrambling code of the UTRAN
FDD neighbor cell.
Reason
scrambling code of the UTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.11.9 TX diversity indication

Full Name
TX diversity indication
Abbreviated Name
diversity
Managed Object

3GPP Name
Diversity 44.018\
Diversity TDD(25.224)
3GPP Reference
N/A
Description
This parameter indicates whether transmission diversity is used

in a UTRAN FDD neighbor cell.
Instance
External Neighbor Cell
Related FG
0..1
Unit
N/A
Default Value
0
2-542
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Transmission diversity is configured or not according to the actual
configuration of the UTRAN FDD neighbor cell.
Without default value, this parameter should be configured according
Reason
to the actual configuration of the UTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.11.10 RAC (RAC)

Full Name
RAC (RAC)
Abbreviated Name
rac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-543
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the Routing Area Code (RAC) of a

UTREAN FDD neighbor cell. Similar to GSM location area, a routing
area is defined to manage a group of cell for GPRS. A location
area is divided into several routing areas, and each routing area is
identified by an RAI (MCC + MNC + LAC + RAC).When an MS in
attached state performs cell reselection, if the RAIs of the old cell
and new cell are different, the MS starts a "routing area update"
procedure.
For an MS in standby state, the SGSN knows which routing area
the MS is located. When there are downlink packet or circuit data
to be transmitted, the SGSN pages the MS in the routing area.RAI
must not belong to two SGSNs.
The RAI configured on the BSC should be the same as that
configured in the CN.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the RAC of the UTRAN FDD
neighbor cell.
Reason
RAC of the UTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path


2-544
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.11.11 Whether an external 3G cell is included in GSM system.

Full Name
Whether an external 3G cell is included in GSM system.
Abbreviated Name
inner3GNcell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an external FDD 3G cell is

managed by a dual-mode controller. It is configured in a dual-mode
GU system.
Instance
External
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When a 3G cell is an intra-RAT neighbor, this parameter is set to 1.
Otherwise, the default value is recommended.
In general, a 3G cell is an inter-RAT neighbor.
Reason
Change take effect
No
2-545
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.12 External UTRAN TDD Cell

Configuration(GExternalUtranCellTDDLcr)
2.12.1 External UTRAN TDD Cell ID
Full Name
External UTRAN TDD Cell ID
Abbreviated Name
GExternalUtranCellTDDLcrId
Managed Object
External UTRAN TDD Cell Configuration(GExternalUtranCellTDDLcr)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an external UTRAN TDD cell ID.
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-546
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Resource Configuration->External UTRAN TDD Cell Configuration
N/A
2.12.2 CI
Full Name
CI
Abbreviated Name
ci
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cell ID of a UTRAN TDD neighbor cell.
Instance
Related FG

Handover
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-547
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
This parameter is configured to the ID of the UTRAN TDD neighbor
cell.
Without default value, this parameter should be configured to the ID
Reason
of the UTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.12.3 MCC
Full Name
MCC
Abbreviated Name
mcc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Mobile Country Code (MCC) of a

UTRAN TDD cell. The MCC is composed of three decimal digits,
uniquely identifying the country to which the MS or network belongs.
Instance
Related FG

Handover
0..999
Unit
N/A
Default Value
Related Parameters
N/A
2-548
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the MCC of the UTRAN TDD
neighbor cell.
Reason
MCC of the UTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.12.4 MNC
Full Name
MNC
Abbreviated Name
mnc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Mobile Network Code (MNC) of a

UTRAN TDD cell. The MNC is composed of three decimal digits,
uniquely identifying a PLMN in a country (determined by the MCC).
Instance
Related FG

Handover
2-549
SJ-20140527134815-013|2015-03-10(R1.1)
0..999
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the MNC of the UTRAN TDD
neighbor cell.
Reason
MNC of the UTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.12.5 RNC ID
Full Name
RNC ID
Abbreviated Name
rnc_id
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-550
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the RNC ID to which a UTRAN TDD

neighbor cell belongs.
Instance
Related FG

Handover
0..4095
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the RNC ID to which the UTRAN
TDD neighbor cell belongs.
Reason
RNC ID to which the UTRAN TDD neighbor cell belongs.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.12.6 LAC (LAC)

Full Name
LAC (LAC)
Abbreviated Name
lac
2-551
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Location Area Code (LAC) of a UTRAN TDD cell. To locate an MS,

a PLMN is divided into several location areas. A location area is
uniquely identified by the LAC in a PLMN. The LAC is a part of an
LAI (LAI = MCC + MNC + LAC).
Instance
Related FG

Handover
1..65533,65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the LAC of the UTRAN TDD
neighbor cell.
Reason
LAC of the UTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-552
SJ-20140527134815-013|2015-03-10(R1.1)
2.12.7 UTRAN adjacent cell bandwidth

Full Name
UTRAN adjacent cell bandwidth
Abbreviated Name
bandWidth3g
Managed Object

3GPP Name
Bandwidth_TDD(25.331)
3GPP Reference
N/A
Description
When CellType3G is set to "TDD", this parameter appears and can

be set, indicating the bandwidth of the selected adjacent UTRAN
cell.
Instance
Related FG
0: 3.84Mcps
1: 1.28Mcps
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
3.84 Mcps is not used any more, so it is not necessary to modify
this parameter.
3.84 Mcps is not used any more. 1.28 Mcps is used in CMCC
Reason
TD-SCDMA network.
Change take effect
No
Access
Read/Write
2-553
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.12.8 UTRAN cell frequency

Full Name
UTRAN cell frequency
Abbreviated Name
arfcn3g
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequencies of a UTRAN TDD neighbor

cell.
Instance
Related FG

Handover
{bandWidth3g==0}[9512..9588][10062..10113][9262..9538][9662..9
938][9562..9638][12862..13088][2112][2137][2162][2187][2212][2
237][2262][2287][2312][2337],
{bandWidth3g==1}[9504..9596][10054..10121][9254..9546][9654..9
946][9554..9646][12854..13096][11504..11996]
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the frequencies of the UTRAN TDD
neighbor cell.
2-554
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
frequencies of the UTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.12.9 UTRAN TDD cell parameter

Full Name
UTRAN TDD cell parameter
Abbreviated Name
CellPara
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cell parameter of a UTRAN TDD

neighbor cell.
Instance
Related FG

Handover
0..127,65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-555
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the parameters of the
UTRAN TDD neighbor cell.
Without default value, this parameter should be configured
Reason
according to the parameters of the UTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.12.10 TX diversity indication

Full Name
TX diversity indication
Abbreviated Name
diversity
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether transmission diversity is used

in a UTRAN TDD neighbor cell.
Instance
Related FG

Handover
0: No
1: Yes
Unit
N/A
Default Value
2-556
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Transmission diversity is configured or not according to the actual
configuration of the UTRAN TDD neighbor cell.
Without default value, this parameter should be configured according
Reason
to the actual configuration of the UTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.12.11 RAC (RAC)

Full Name
RAC (RAC)
Abbreviated Name
rac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-557
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the Routing Area Code (RAC) of a

UTREAN TDD neighbor cell. Similar to GSM location area, a routing
area is defined to manage a group of cell for GPRS. A location
area is divided into several routing areas, and each routing area is
identified by an RAI (MCC + MNC + LAC + RAC).When an MS in
attached state performs cell reselection, if the RAIs of the old cell
and new cell are different, the MS starts a "routing area update"
procedure.
For an MS in standby state, the SGSN knows which routing area the
MS is located. When there are downlink packet data or circuit data
to be transmitted, the SGSN pages the MS in the routing area.RAI
must not belong to two SGSNs.
The RAI configured on the BSC should be the same as that
configured in the CN.
Instance
Related FG

Handover
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the RAC of the UTRAN TDD
neighbor cell.
Reason
RAC of the UTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

2-558
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.12.12 Apply Sync Case / Apply TSTD

Full Name
Apply Sync Case / Apply TSTD
Abbreviated Name
syncCaseTstd
Managed Object

3GPP Name
Sync Case TSTD

(25.304,25.224)
3GPP Reference
N/A
Description
This parameter indicates whether SyncCase or Time Switched

Transmit Diversity (TSTD) is used. SyncCase, referring to a
synchronization mode, is not used.
Instance
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the configuration of the
UTRAN TDD neighbor cell.
Without default value, this parameter should be configured
Reason
according to the configuration of the UTRAN TDD neighbor cell.
Change take effect
No
2-559
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.12.13 Whether an external 3G cell is included in

GSM system.
Full Name
Whether an external 3G cell is included in

GSM system.
Abbreviated Name
inner3GNcell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the external TDD 3G cell is

managed by a dual-mode controller. It is configured in a dual-mode
GT system.
Instance
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-560
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
When a 3G cell is an intra-RAT neighbor, this parameter is set to 1.
Otherwise, the default value is recommended.
In general, a 3G cell is an inter-RAT neighbor.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.13 External E-UTRAN FDD Cell

Configuration(GExternalEutranCellFDD)
2.13.1 External E-UTRAN FDD Cell Configuration ID
Full Name
External E-UTRAN FDD Cell Configuration ID
Abbreviated Name
GExternalEutranCellFDDId
Managed Object
External E-UTRAN FDD Cell Configuration(GExternalEutranCellFDD)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an external E-UTRAN FDD cell ID.
Instance
BSC
Related FG
N/A
1..65535
Unit
N/A
Default Value
N/A
2-561
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Resource Configuration->External E-UTRAN FDD Cell Configuration
N/A
2.13.2 MCC
Full Name
MCC
Abbreviated Name
mcc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Mobile Country Code (MCC) of an

EUTRAN FDD neighbor cell. The MCC is composed of three
decimal digits, uniquely identifying the country to which the MS or
network belongs.
Instance
External Eutran Cell

2-562
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
ZGO-02-03-008 GSM/LTE Cell Reselection
0..999
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the MCC of the EUTRAN FDD
neighbor cell.
Reason
MCC of the EUTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.13.3 MNC
Full Name
MNC
Abbreviated Name
mnc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-563
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the Mobile Network Code (MNC) of an

EUTRAN FDD neighbor cell. The MNC is composed of three
decimal digits, uniquely identifying a PLMN in a country (determined
by the MCC).
Instance
Related FG
N/A
0..999
Unit
N/A
Default Value
Related Parameters
MNCBcdCodeLen
Parameters

either 2 or 3.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the MNC of the EUTRAN FDD
neighbor cell.
Reason
MNC of the EUTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.13.4 EUTRAN NODEB Identification

Full Name
EUTRAN NODEB Identification

2-564
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
enbId
Managed Object

3GPP Name
eNB
3GPP Reference
N/A
Description
This parameter indicates the eNodeB ID of an EUTRAN FDD

neighbor cell.
Instance
Related FG
N/A
0..1048575
Unit
N/A
Default Value
N/A
Related Parameters
ENBInd
If ENBInd is 0, this eNodeB is a macro cell. The value range of
Parameters
enbId is from 0 to FFFFF. If ENBInd is 1, this eNodeB is a femtocell.

The value range of enbId is from 0 to FFFFF.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the eNodeB ID of the EUTRAN FDD
neighbor cell.
Reason
eNodeB ID of the EUTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-565
SJ-20140527134815-013|2015-03-10(R1.1)
2.13.5 Physical layer cell identity of LTE CELL

Full Name
Physical layer cell identity of LTE CELL
Abbreviated Name
PCID
Managed Object

3GPP Name
PCID
3GPP Reference
N/A
Description
This parameter indicates the physical ID of an EUTRAN FDD

neighbor cell.
Instance
Related FG
N/A
0..503
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the physical ID of the EUTRAN FDD
neighbor cell.
Reason
physical ID of the EUTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

2-566
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.13.6 specified EARFCN of E-UTRAN cells

Full Name
specified EARFCN of E-UTRAN cells
Abbreviated Name
ArfcnLTE
Managed Object

3GPP Name
EARFCN
3GPP Reference
N/A
Description
This parameter indicates the frequencies of a EUTRAN FDD

neighbor cell.
Instance
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the frequencies of the EUTRAN
FDD neighbor cell.
Reason
frequencies of the EUTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
2-567
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.13.7 Tracking area code

Full Name
Tracking area code
Abbreviated Name
TAC
Managed Object

3GPP Name
TAC
3GPP Reference
N/A
Description
This parameter indicates the Tracking Area Code (TAC) of an

EUTRAN FDD neighbor cell.
Instance
Cell
Related FG
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the TAC of the EUTRAN FDD
neighbor cell.
Without default value, this parameter must be configured to the TAC
Reason
of the EUTRAN FDD neighbor cell.
Change take effect
No
2-568
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.13.8 The attribute of LTE NodeB

Full Name
The attribute of LTE NodeB
Abbreviated Name
ENBInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the LTE NodeB attributes of an EUTRAN

FDD neighbor cell.
Instance
Cell
Related FG
N/A
0: Macro eNB(Macro eNB)

1: Home eNB(Home eNB)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the NodeB attributes of the EUTRAN
FDD neighbor cell.
2-569
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
NodeB attributes of the EUTRAN FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.13.9 the minimum value of the channel bandwidth

Full Name
the minimum value of the channel bandwidth
Abbreviated Name
measureBandwidth
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the minimum bandwidth of an LTE adjacent

channel in an EUTRAN FDD neighbor cell. It indicates the number
of resource blocks that can be measured by the MS.
Instance
Cell
Related FG
N/A
0: NRB = 6
1: NRB = 15
2: NRB = 25
3: NRB = 50
4: NRB = 75
5: NRB = 100
6: reserved
7: reserved
Unit
N/A
Default Value
5
2-570
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the minimum bandwidth of an LTE
adjacent channel in the EUTRAN FDD neighbor cell.
Reason
minimum bandwidth of an LTE adjacent channel in the EUTRAN

FDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.13.10 EUTRAN CELL Identification

Full Name
EUTRAN CELL Identification
Abbreviated Name
EUTRANID
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ID of an external Eutran FDD cell.
Instance
Related FG
N/A
2-571
SJ-20140527134815-013|2015-03-10(R1.1)
{ENBInd==0}[0],
{ENBInd==1}[0..255]
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The IDs should be created differently for external neighbor cells
and dont need to be adjusted.
Different external neighbor cells bear different IDs which have no
Reason
special meaning.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.14 External UTRAN FDD Cell CRRM

Configuration(GCrrmNCellLdFDD)
2.14.1 External UTRAN FDD Cell CRRM ID
Full Name
External UTRAN FDD Cell CRRM ID
Abbreviated Name
GCrrmNCellLdFDDId
Managed Object
External UTRAN FDD Cell CRRM Configuration(GCrrmNCellLdFDD)
2-572
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CRRM ID of an external UTRAN FDD

cell.
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Resource Configuration->External UTRAN FDD Cell
Configuration->External UTRAN FDD Cell CRRM Configuration
N/A
2.14.2 Cs Remained User Num Low Threshold

2-573
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Cs Remained User Num Low Threshold
Abbreviated Name
csRemUserLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold by which the GSM network

determines whether the remaining number of accessible CS
subscribers in an FDD neighbor cell is low.
Instance
Related FG
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the threshold is high, the MS cannot easily hand over to the FDD
neighbor cell. If the threshold is low, the MS is easy to hand over

to the FDD neighbor cell.
This parameter is set based on usual experiences.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-574
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.14.3 Ps Remained User Num Low Threshold

Full Name
Ps Remained User Num Low Threshold
Abbreviated Name
psRemUserLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the remaining number of accessible PS
subscribers in an FDD neighbor cell is low.
Instance
Related FG
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the threshold is high, the MS cannot easily reselect the FDD
neighbor cell. If the threshold is low, the MS is easy to reselect the

FDD neighbor cell.
Reason
Change take effect
No
2-575
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.14.4 Cs Remained User Num Medium Threshold

Full Name
Cs Remained User Num Medium Threshold
Abbreviated Name
csRemUserMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

subscribers in an FDD neighbor cell is average.
Instance
Related FG
0..65535
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the threshold is high, the MS cannot easily hand over to the FDD
neighbor cell. If the threshold is low, the MS is easy to hand over

to the FDD neighbor cell.
Reason
2-576
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.5 Ps Remained User Num Medium Threshold

Full Name
Ps Remained User Num Medium Threshold
Abbreviated Name
psRemUserMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

subscribers in an FDD neighbor cell is average.
Instance
Related FG
0..65535
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-577
SJ-20140527134815-013|2015-03-10(R1.1)
If the threshold is high, the MS cannot easily reselect the FDD
neighbor cell. If the threshold is low, the MS is easy to reselect the

FDD neighbor cell.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.6 Uplink Load Low Threshold

Full Name
Uplink Load Low Threshold
Abbreviated Name
ulLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the uplink load of an FDD neighbor cell is low.
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
2-578
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is adjusted based on the network load and load
balancing policy. When the FDD load is not high and the FDD cell is
desired to carry more traffic, this threshold should be raised.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.7 Uplink Load Medium Threshold

Full Name
Uplink Load Medium Threshold
Abbreviated Name
ulLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the uplink load of an FDD neighbor cell is
moderate.
Instance
Related FG
1..100
2-579
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.8 Uplink Load High Threshold

Full Name
Uplink Load High Threshold
Abbreviated Name
ulLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-580
SJ-20140527134815-013|2015-03-10(R1.1)
Description

determines whether the uplink load of an FDD neighbor cell is high.
Instance
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.9 Downlink Load Low Threshold

Full Name
Downlink Load Low Threshold
Abbreviated Name
dlLoadLowThs
2-581
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the downlink load of an FDD neighbor cell is low.
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-582
SJ-20140527134815-013|2015-03-10(R1.1)
2.14.10 Downlink Load Medium Threshold

Full Name
Downlink Load Medium Threshold
Abbreviated Name
dlLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the downlink load of an FDD neighbor cell is
moderate.
Instance
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
2-583
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.14.11 Downlink Load High Threshold

Full Name
Downlink Load High Threshold
Abbreviated Name
dlLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the downlink load of an FDD neighbor cell is
high.
Instance
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
2-584
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.14.12 Real Time Uplink Load Low Threshold

Full Name
Real Time Uplink Load Low Threshold
Abbreviated Name
ulRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the uplink real-time load of an FDD neighbor
cell is low.
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-585
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.13 Real Time Uplink Load Medium Threshold

Full Name
Real Time Uplink Load Medium Threshold
Abbreviated Name
ulRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

cell is moderate.
Instance
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
2-586
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.14 Real Time Uplink Load High Threshold

Full Name
Real Time Uplink Load High Threshold
Abbreviated Name
ulRtLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

cell is high.
Instance
Related FG
1..100
2-587
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.15 Real Time Downlink Load Low Threshold

Full Name
Real Time Downlink Load Low Threshold
Abbreviated Name
dlRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-588
SJ-20140527134815-013|2015-03-10(R1.1)
Description

determines whether the downlink real-time load of an FDD neighbor
cell is low.
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.16 Real Time Downlink Load Medium Threshold

Full Name
Real Time Downlink Load Medium Threshold
Abbreviated Name
dlRtLoadMidThs
2-589
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

cell is moderate.
Instance
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-590
SJ-20140527134815-013|2015-03-10(R1.1)
2.14.17 Real Time Downlink Load High Threshold

Full Name
Real Time Downlink Load High Threshold
Abbreviated Name
dlRtLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

cell is high.
Instance
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
2-591
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.14.18 Not Real Time Uplink Load Low Threshold

Full Name
Not Real Time Uplink Load Low Threshold
Abbreviated Name
ulNRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the uplink non-real-time load of an FDD
neighbor cell is low.
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
2-592
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.14.19 Not Real Time Uplink Load Medium Threshold

Full Name
Not Real Time Uplink Load Medium Threshold
Abbreviated Name
ulNRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

neighbor cell is moderate.
Instance
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-593
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.20 Not Real Time Uplink Load High Threshold

Full Name
Not Real Time Uplink Load High Threshold
Abbreviated Name
ulNRtLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

neighbor cell is high.
Instance
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
2-594
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.21 Not Real Time Downlink Load Low Threshold

Full Name
Not Real Time Downlink Load Low Threshold
Abbreviated Name
dlNRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the downlink non-real-time load of an FDD
Instance
Related FG
1..100
2-595
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.22 Not Real Time Downlink Load Medium Threshold

Full Name
Not Real Time Downlink Load Medium Threshold
Abbreviated Name
dlNRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-596
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.14.23 Not Real Time Downlink Load High Threshold

Full Name
Not Real Time Downlink Load High Threshold
Abbreviated Name
dlNRtLoadHighThs
2-597
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-598
SJ-20140527134815-013|2015-03-10(R1.1)
2.15 External UTRAN TDD Cell CRRM

Configuration(GCrrmNCellLdTDDLcr)
2.15.1 External UTRAN TDD Cell CRRM ID
Full Name
External UTRAN TDD Cell CRRM ID
Abbreviated Name
GCrrmNCellLdTDDLcrId
Managed Object
External UTRAN TDD Cell CRRM Configuration(GCrrmNCellLdTDDLcr)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CRRM ID of an external UTRAN TDD

cell.
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
2-599
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Restricted
OMC Access path

Resource Configuration->External UTRAN TDD Cell
Configuration->External UTRAN TDD Cell CRRM Configuration
N/A
2.15.2 Cs Remained User Num Low Threshold

Full Name
Cs Remained User Num Low Threshold
Abbreviated Name
csRemUserLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

subscribers in a TDD neighbor cell is low.
Instance
Related FG
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the threshold is high, an MS is less likely to be handed over to the
TDD neighbor cell. If the threshold is low, an MS is more likely to

be handed over to the TDD neighbor cell.
2-600
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is an empirical value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.15.3 Ps Remained User Num Low Threshold

Full Name
Ps Remained User Num Low Threshold
Abbreviated Name
psRemUserLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

subscribers in a TDD neighbor cell is low.
Instance
Related FG
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-601
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
If the threshold is high, an MS is less likely to reselect the TDD
neighbor cell. If the threshold is low, the MS is more likely to reselect

the TDD neighbor cell.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.15.4 Cs Remained User Num Medium Threshold

Full Name
Cs Remained User Num Medium Threshold
Abbreviated Name
csRemUserMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

subscribers in a TDD neighbor cell is average.
Instance
Related FG
0..65535
Unit
N/A
2-602
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the threshold is high, an MS is less likely to be handed over to the
TDD neighbor cell. If the threshold is low, an MS is more likely to

be handed over to the TDD neighbor cell.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.15.5 Ps Remained User Num Medium Threshold

Full Name
Ps Remained User Num Medium Threshold
Abbreviated Name
psRemUserMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-603
SJ-20140527134815-013|2015-03-10(R1.1)
Description

subscribers in a TDD neighbor cell is medium.
Instance
Related FG
0..65535
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the threshold is high, an MS is less likely to reselect the TDD
neighbor cell. If the threshold is low, the MS is more likely to reselect

the TDD neighbor cell.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
ulLoadLowThs
2-604
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the uplink load of a TDD neighbor cell is low.
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the network load and the
load balancing policy. When the load in the TDD neighbor cell is
not high and the TDD neighbor cell is desired to carry more traffic,
this threshold can be increased.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-605
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
ulLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the uplink load of a TDD neighbor cell is
moderate.
Instance
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
2-606
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A

Full Name
Abbreviated Name
ulLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the uplink load of a TDD neighbor cell is high.
Instance
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
2-607
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the downlink load of a TDD neighbor cell is low.
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-608
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the downlink load of a TDD neighbor cell is
moderate.
Instance
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
2-609
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the downlink load of a TDD neighbor cell is high.
Instance

2-610
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
ulRtLoadLowThs
Managed Object

2-611
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the uplink real-time load of a TDD neighbor
cell is low.
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-612
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
ulRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

cell is moderate.
Instance
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
2-613
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A

Full Name
Abbreviated Name
ulRtLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

cell is high.
Instance
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-614
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the downlink real-time load of a TDD neighbor
cell is low.
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-615
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

cell is moderate.
Instance
Related FG
1..100
2-616
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlRtLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-617
SJ-20140527134815-013|2015-03-10(R1.1)
Description

cell is high.
Instance
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name

2-618
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
ulNRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the uplink non-real-time load of a TDD neighbor
cell is low.
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-619
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
ulNRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

cell is moderate.
Instance
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
0
2-620
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
ulNRtLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

cell is high.
Instance
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-621
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlNRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

determines whether the downlink non-real-time load of a TDD
Instance
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
2-622
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlNRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

2-623
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlNRtLoadHighThs
Managed Object

2-624
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
UTRAN Cell
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-625
SJ-20140527134815-013|2015-03-10(R1.1)
2.16 External E-UTRAN TDD Cell

Configuration(GExternalEutranCellTDD)
2.16.1 External E-UTRAN TDD Cell Configuration ID
Full Name
External E-UTRAN TDD Cell Configuration ID
Abbreviated Name
GExternalEutranCellTDDId
Managed Object
External E-UTRAN TDD Cell Configuration(GExternalEutranCellTDD)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an external E-UTRAN TDD cell

configuration ID.
Instance
BSC
Related FG
N/A
1..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
2-626
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Restricted
OMC Access path

Resource Configuration->External E-UTRAN TDD Cell Configuration
N/A
2.16.2 MCC
Full Name
MCC
Abbreviated Name
mcc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Mobile Country Code (MCC) of an

EUTRAN TDD neighbor cell. The MCC is composed of three
decimal digits, uniquely identifying the country to which the MS or
network belongs.
Instance
Related FG
N/A
0..999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the MCC of the EUTRAN TDD
neighbor cell.
Reason
MCC of the EUTRAN TDD neighbor cell.

2-627
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.16.3 MNC
Full Name
MNC
Abbreviated Name
mnc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Mobile Network Code (MNC) of an

EUTRAN TDD neighbor cell. The MNC is composed of three
decimal digits, uniquely identifying a PLMN in a country (determined
by the MCC).
Instance
Related FG
N/A
0..999
Unit
N/A
Default Value
N/A
Related Parameters
MNCBcdCodeLen
Parameters

either 2 or 3.
Value Type
long
Parameter Type
2-628
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter is configured to the MNC of the EUTRAN TDD
neighbor cell.
Reason
MNC of the EUTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.16.4 EUTRAN NODEB Identification

Full Name
EUTRAN NODEB Identification
Abbreviated Name
enbId
Managed Object

3GPP Name
eNB
3GPP Reference
N/A
Description
This parameter indicates the NODEB ID of an EUTRAN TDD

neighbor cell.
Instance
Related FG
N/A
0..1048575
Unit
N/A
Default Value
N/A
Related Parameters
enbId
2-629
SJ-20140527134815-013|2015-03-10(R1.1)
If ENBInd is 0, this eNodeB is a macro cell. The value range of
Parameters
enbId is from 0 to FFFFF. If ENBInd is 1, this eNodeB is a femtocell.

The value range of enbId is from 0 to FFFFF.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the NODEB ID of the EUTRAN TDD
neighbor cell.
Reason
NODEB ID of the EUTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.16.5 Physical layer cell identity of LTE CELL

Full Name
Physical layer cell identity of LTE CELL
Abbreviated Name
PCID
Managed Object

3GPP Name
PCID
3GPP Reference
N/A
Description
This parameter indicates the physical ID of an EUTRAN TDD

neighbor cell.
Instance
Related FG
N/A
2-630
SJ-20140527134815-013|2015-03-10(R1.1)
0..503
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the physical ID of the EUTRAN TDD
neighbor cell.
Reason
physical ID of the EUTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.16.6 specified EARFCN of E-UTRAN cells

Full Name
specified EARFCN of E-UTRAN cells
Abbreviated Name
ArfcnLTE
Managed Object

3GPP Name
EARFCN
3GPP Reference
N/A
2-631
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the frequencies of a EUTRAN TDD

neighbor cell.
Instance
Related FG
N/A
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the frequencies of the EUTRAN
TDD neighbor cell.
Reason
frequencies of the EUTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.16.7 Tracking area code

Full Name
Tracking area code
Abbreviated Name
TAC
Managed Object
2-632
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
TAC
3GPP Reference
N/A
Description
This parameter indicates the Tracking Area Code (TAC) of an

EUTRAN TDD neighbor cell.
Instance
Cell
Related FG
N/A
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the TAC of the EUTRAN TDD
neighbor cell.
Without default value, this parameter must be configured to the TAC
Reason
of the EUTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.16.8 The attribute of LTE NodeB

Full Name
The attribute of LTE NodeB

2-633
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
ENBInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the LTE NodeB attributes of an EUTRAN

TDD neighbor cell.
Instance
Cell
Related FG
N/A
0: Macro eNB(Macro eNB)

1: Home eNB(Home eNB)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the NodeB attributes of the EUTRAN
TDD neighbor cell.
Reason
NodeB attributes of the EUTRAN TDD neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-634
SJ-20140527134815-013|2015-03-10(R1.1)
2.16.9 the minimum value of the channel bandwidth

Full Name
the minimum value of the channel bandwidth
Abbreviated Name
measureBandwidth
Managed Object

3GPP Name
NRB
3GPP Reference
N/A
Description
This parameter specifies the minimum bandwidth of an LTE adjacent

channel in an EUTRAN TDD neighbor cell. It indicates the number
of resource blocks that can be measured by the MS.
Instance
Cell
Related FG
N/A
0: NRB = 6
1: NRB = 15
2: NRB = 25
3: NRB = 50
4: NRB = 75
5: NRB = 100
6: reserved
7: reserved
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured to the minimum bandwidth of an LTE
adjacent channel in the EUTRAN TDD neighbor cell.
Reason
minimum bandwidth of an LTE adjacent channel in the EUTRAN

TDD neighbor cell.
Change take effect
2-635
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.16.10 EUTRAN CELL Identification

Full Name
EUTRAN CELL Identification
Abbreviated Name
EUTRANID
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ID of an external Eutran FDD cell.
Instance
Related FG
N/A
{ENBInd==0}[0],
{ENBInd==1}[0..255]
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The IDs should be created differently for external neighbor cells
and dont need to be adjusted.

2-636
SJ-20140527134815-013|2015-03-10(R1.1)
Different external neighbor cells bear different IDs which have no
Reason
special meaning.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17 GSM Cell Configuration(GGsmCell)

2.17.1 GSM Cell Configuration ID
Full Name
GSM Cell Configuration ID
Abbreviated Name
GGsmCellId
Managed Object
GSM Cell Configuration(GGsmCell)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a GSM cell configuration ID.
Instance
BSC
Related FG
N/A
1..108
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
2-637
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path
GUI: Managed Element->GSM Logical Configuration->Cell

Information Configuration->GSM Cell Configuration
N/A
2.17.2 CI
Full Name
CI
Abbreviated Name
cellIdentity
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
To uniquely identify each cell in a GSM PLMN, the operator allocates

a unique ID for each cell in the same location area. This parameter
indicates the unique cell ID in a location area.
Instance
Cell
Related FG
N/A
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-638
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.3 NCC
Full Name
NCC
Abbreviated Name
ncc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-639
SJ-20140527134815-013|2015-03-10(R1.1)
Description
A Network Color Code (NCC) is a part of a Base Station Identity

Code (BSIC). BSIC = NCC + BCC. An NCC is used for an MS to
distinguish adjacent cells that belong to different PLMNs. In general,
the adjacent PLMNs should be set to different NCCs. Through a
related cell parameter NccPermitted, the operator can forbid the MS
in the cell to measure and report some cells with specified NCCs.
The NCC occupies three bits, and is one of the network identity
parameters.
Instance
Cell
Related FG
N/A
0..7
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-640
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.4 BCC
Full Name
BCC
Abbreviated Name
bcc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A Base station Color Code (BCC) is a part of a Base Station Identity

Code (BSIC). BSIC = NCC + BCC.A BCC is used for an MS to
distinguish adjacent cells with the same BCCH frequency in a
GSM PLMN. In addition, as specified in the GSM specification, the
Training Sequence Code (TSC) on the BCCH must equal the BCC
in the cell. The BCC occupies three bits, and is one of the network
identity parameters.
Instance
Cell
Related FG
N/A
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
2-641
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.17.5 TSC
Full Name
TSC
Abbreviated Name
tsc
Managed Object

3GPP Name
TSC
3GPP Reference
N/A
Description
This parameter indicates the Training Sequence Code (TSC) in this

timeslot. There are eight TSCs defined, and they are low correlated.
The TSC is used as delay compensation reference for the adaptive
equalizer at the receiver. For the timeslot where the BCCH is
located, this parameter must equal the BCC of the cell.
Instance
Cell
Related FG
N/A
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
2-642
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read
OMC Access path

N/A
2.17.6 MIN received signal level to access

Full Name
MIN received signal level to access
Abbreviated Name
rxLevAccessMin
Managed Object

3GPP Name
RXLEV_ACCESS_MIN
3GPP Reference
N/A
Description
To prevent an MS from accessing the network at a low receiving

signal level, which causes radio resource waste due to unsatisfied
communication quality, as defined in the GSM specification, the
receiving signal level of the MS must be greater than a threshold so
that the MS can access the network with satisfied communication
quality. This parameter indicates the threshold rxLevAccessMin.
Moreover, this parameter is one of the criterions of cell reselection.
This parameter is broadcasted to all the MSs in the cell through
the messages RIL3_RR SYSTEM INFORMATION TYPE3 and
RIL3_RR SYSTEM INFORMATION TYPE4.rxLevAccessMin is one
of the parameters used for cell selection.
Generally, it is recommended to set the minimum Rx level to a
value close to the receiver sensitivity of the MS. For a cell with
traffic overload, the minimum Rx level can be properly increased to
decrease the C1 and C2 values in the cell and reduce the effective
coverage of the cell. However, a too high minimum Rx level may
result in coverage holes on the boundary between cells.
Generally, an Rx level no higher than -90 dBm is recommended for
traffic balancing. During the initial operation stage of the network,
2-643
SJ-20140527134815-013|2015-03-10(R1.1)

problems are resolved, this parameter can be increased.
Instance
Cell
Related FG
ZGB-02-02-007 Cell Selection
0..63
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be adjusted as required. It is recommended that
the value is not greater than 15.

Increasing this parameter may decrease the effective coverage
of the cell, but can increase access performance and decrease
dropped-call rate.
This parameter is set to a value that is a little higher than the
Reason
receiver sensitivity of the MS.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.7 Control channel MAX power level

Full Name
Control channel MAX power level
Abbreviated Name
msTxPwrMaxCCH
2-644
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
MS_TXPWR_MAX_CCH
3GPP Reference
N/A
Description

transmission power is controlled by the network. The network
sets the power for the MS and sends the power-control command
on the SACCH (There are two bytes in the SACCH header. One
byte is used for power control, and the other is used for timing
advance).The MS extracts the power control byte from the downlink
SACCH and transmits at the specified power value. If the MS cannot
value. This parameter is set to different values for frequency bands.
As an associated signaling channel, the SACCH must be used
together with other channels such as SDCCH and TCH. So uplink
power control is actually started after the MS receives the SACCH.
Before the MS receives the SACCH, its transmission power
(transmission power on the RACH) depends on MsTxPwrMaxCch
(maximum MS power on the CCCH).
As one of the parameters used for cell selection and cell reselection,
MsTxPwrMaxCch is used to calculate C1 and C2.
As one of the parameters for cell selection, this parameter is
broadcasted to all the MSs in the cell through the messages
RIL3_RR SYSTEM INFORMATION TYPE3 and RIL3_RR SYSTEM
INFORMATION TYPE4.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-645
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is recommended. If the parameter value is set too
large, the MS closer to the BTS causes interferences on adjacent

channels. If the parameter value is set too small, the access
success rate of the cell edge MS is low.
This parameter should be configured as the following principle: After
a certain access success rate of the cell-edge MS is guaranteed, set
the MS access level as low as possible. Obviously, the larger the cell
coverage is, the higher the MS transmission power is. Generally, this
parameter is set to 5 (for a GSM900 MS) or 0 (for a GSM1800 MS).
This parameter indicates the maximum power of most MSs.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.8 NCC permitted

Full Name
NCC permitted
Abbreviated Name
plmnPermitted
Managed Object

3GPP Name
NCC Permitted
3GPP Reference
N/A
2-646
SJ-20140527134815-013|2015-03-10(R1.1)
Description
In dedicated mode (during a communication), an MS sends

measurement reports about neighbor cells to the BTS. Because
at most six neighbor cells can be sent in a measurement report,
the MS should report the cells that may probably be the handover
target, but not any cells in a signal level order from high to low.
Generally, the MS should not report the cells that belong to other
GSM PLMNs. To achieve the above function, instructs the MS to
measure only the cells with specified NCCs. The NccPermitted
parameter lists the NCCs of the cells that the MS needs to measure.
An NCC is described with the three high bits of a BSIC, which
is continuously sent on the SCH in a cell. So, after comparing
the NCC of the measured neighbor cell with NccPermitted, the
MS reports the neighbor cell to the BTS if the NCC is included in
NccPermitted, and discards the measurement report if the NCC is
not included in NccPermitted. This parameter is broadcasted to
the MS through RIL3_RR SYSTEM INFORMATION TYPE2 and
TYPE6. NccPermitted is one of the system control parameters.
Instance
Cell
Related FG
N/A
0: not allowed
1: allowed
Unit
N/A
Default Value
[1,1,1,1,1,1,1,1]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
This parameter is not modified unless there are special
requirements.
This parameter is configured according to actual network
Reason
configuration.
Change take effect
No
2-647
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.17.9 LocationArea DN
Full Name
LocationArea DN
Abbreviated Name
refGLocationArea
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of the quoted location area.
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
String
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set in accordance with the radio data planning.
The default value is set in accordance with the radio data planning.
Reason
Change take effect
No
0
2-648
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.17.10 Cell Sequence

Full Name
Cell Sequence
Abbreviated Name
GGsmCellSeq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cell ID in a site. This ID uniquely

identifies a cell in a site.
Instance
Cell
Related FG
N/A
1..108
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set in accordance with the cell planning.
Without default value, this parameter is set in accordance with the
Reason
radio data planning.
Change take effect
New Connection
2-649
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.11 BCCH arfcn

Full Name
BCCH arfcn
Abbreviated Name
bcchFrequency
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BCCH ARFCN of a cell.
Instance
Cell
Related FG
N/A
0..1023
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
2-650
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read
OMC Access path

N/A
2.17.12 Common control channel configuration

Full Name
Common control channel configuration
Abbreviated Name
CcchConf
Managed Object

3GPP Name
CCCH-CONF
3GPP Reference
N/A
Description
The Common Control Channel (CCCH) configuration parameter is

one of the system control parameters. In GSM, the CCCH includes
the Access Grant Channel (AGCH) and Paging Channel (PCH). The
AGCH is used to send an access grant message, and the PCH is
used to send a paging message.
In a cell, all the logical channels can share the CCCH. Based on
the channel configuration and traffic model in a cell, the CCCH can
be mapped to one or more physical channels, and the CCCH and
SDCCH can share one physical channel.
The CCCH configuration parameter determines in which
way the CCCH is combined, and the CCCH combination
must be consistent with the actual CCCH configuration. The
BS_CC_CHANS parameter indicates the number of CCCHs, and
the BS_CCCH_SDCCH_COMB parameter indicates whether the
CCCH and SDCCH share one physical channel.
This parameter is broadcasted to the MS in a cell through the
message RIL3_RR SYSTEM INFORMATION TYPE3.
Instance
Cell
Related FG
ZGB-03-02-001 Support of SDCCH/4 and SDCCH/8

2-651
SJ-20140527134815-013|2015-03-10(R1.1)
0: CCCH uses one physical channel, not combined with SDCCH

1: CCCH uses one physical channel, combined with SDCCH
2: CCCH uses two physical channels, not combined with SDCCH
4: CCCH uses three physical channels, not combined with SDCCH
6: CCCH uses four physical channels, not combined with SDCCH
Unit
N/A
Default Value
Related Parameters
tsChannelComb
When CcchConf is set to "CCCH uses one physical channel,
Parameters
combined with SDCCH", the channel type of TS 0 must be set

to one of the following two options: "BCCH+SDCCH/4" and
"BCCH+SDCCH/4+CBCH".
When CcchConf is set to "CCCH uses one physical channel, not
combined with SDCCH", the channel type of TS 0 must be set to
one of the following two options: "FCCH+SCH+BCCH+CCCH" and
"BCCH+CCCH".
When CcchConf is set to "CCCH uses two physical channels, not
combined with SDCCH", the channel types of TS 0 and TS 2 must be
set to one of the following two options: "FCCH+SCH+BCCH+CCCH"
and "BCCH+CCCH".
When CcchConf is set to "CCCH uses three physical channels,
not combined with SDCCH", the channel types of TS 0, TS
2, and TS 4 must be set to one of the following two options:
"FCCH+SCH+BCCH+CCCH" and "BCCH+CCCH".
When CcchConf is set to "CCCH uses four physical channels,
not combined with SDCCH", the channel types of TS 0, TS 2,
TS 4, and TS 6 must be set to one of the following two options:
"FCCH+SCH+BCCH+CCCH" and "BCCH+CCCH".
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter value is determined based on the traffic load in the
location area to which a cell belongs but not based on the number of
TRXs configured in the cell, because it affects PCH capacity. The
default value is 0. This parameter must be consistent with the CCCH
configuration. This parameter is defined by network optimization
engineers. It is recommended that the parameters of the cells in the
same location area are set to the same value.
Based on experiences, if there is one or two TRXs in a cell, it is
recommended that the CCCH is mapped to one physical channel
and shares the physical channel with the SDCCH. For a cell with
2-652
SJ-20140527134815-013|2015-03-10(R1.1)
more than 4 TRXs, the parameter configuration is to be further

studied.
In most cases, there are more than two TRXs in a cell. The SDCCH
Reason
needs to be mapped to a standalone physical channel.
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.17.13 PS Support
Full Name
PS Support
Abbreviated Name
PsSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether GPRS (EDGE) is supported in

this cell. If "GPRS" or "EGDE" is selected, a corresponding page is
displayed on the screen.
Instance
Cell
Related FG
N/A
0: Not Support
1: GPRS
2: EDGE
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-653
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For a cell that does not support PS services, this parameter is set to
"Not Support".
For a cell that supports GRPS only, this parameter is set to "GRPS".
For a cell that supports both GRPS and EDGE, this parameter is
set to "EDGE".
For a V2 80W BTS, only CS1 and CS2 are supported.
This parameter is configured based on services required.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.14 GRoutingArea DN
Full Name
GRoutingArea DN
Abbreviated Name
refGRoutingArea
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of a routing area, which is used

to find the corresponding RAC.
Instance
Cell
Related FG
N/A
N/A
2-654
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set in accordance with the radio data planning.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.15 Number of blocks reserved for AGCH

Full Name
Number of blocks reserved for AGCH
Abbreviated Name
bsAgBlkRes
Managed Object

3GPP Name
BS_AG_BLKS_RES
3GPP Reference
N/A
2-655
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the number of blocks reserved for the

AGCH (BS-AG-BLK-RES) in a 51-multiframe.
Because the AGCH and PCH share the CCCH blocks, the number
of blocks reserved for the AGCH must be defined. By reading the
parameters CCCHConf and BsAgBlkRes in system information, the
MS can calculate the number of blocks used for the PCH.
This parameter should be tuned based on the actual load of common
channels in a cell. This parameter is broadcasted to the MS in a cell
through the message RIL3_RR SYSTEM INFORMATION TYPE3.
Instance
Cell
Related FG
ZGB-02-01-001 Paging
{si13Locate==0}[0..7],
{si13Locate==1}[1..7]
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For the cells in a location area, it is recommended to set this
parameter to the same value.

As defined in the GSM specification, the number of CCCH blocks
reserved for the AGCH must not be 0 in the following cases:
There is system information to be broadcasted in the Extended BCH.
The CBCH is configured.
In GSM-R, the NCH is configured.
When this parameter is set to 1, it affects PCH blocks a little. In
Reason
this case, an extended BCCH block can be configured, which

guarantees that system information is broadcasted in time.
Change take effect
Yes
Access
Read/Write
2-656
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.16 Number of multi-frames of the PCH

Full Name
Number of multi-frames of the PCH
Abbreviated Name
bsPaMframs
Managed Object

3GPP Name
BS_PA_MFRMS
3GPP Reference
N/A
Description
This parameter indicates the number of 51-multiframes in which the

MSs in a paging group are paged. It is one of the system control
parameters.
As defined in the GSM specification, each MS (identified by its IMSI)
belongs to a paging group. In a cell, the paging messages of the
MSs in a paging group are sent in a paging sub-channel. An MS
can calculate the paging group it belongs to based on its IMSI, and
find the corresponding paging sub-channel.
Actually, an MS only "listens" to the paging sub-channel to which it
belongs but ignores other paging sub-channels. Thus the MS can
power off some hardware elements to save power. The number of
paging multiframes refers to how many 51-multiframes are defined
as a paging cycle. This parameter can actually be used to calculate
how many paging sub-channels are defined in a cell.
This parameter is used for the MS to calculate the paging group to
which it belongs and listen to the corresponding paging sub-channel.
This parameter is broadcasted to the MS in a cell through system
information. The number of paging multiframes is broadcasted
to the MS in a cell through the message RIL3_RR SYSTEM
INFORMATION TYPE3.
Instance
Cell
Related FG
2..9
Unit
N/A
2-657
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher this parameter value is, the more the paging
sub-channels are in a cell, and the less the subscribers belong to

each paging sub-channel. Thus the average standby time of an MS
is increased, and the delay of a paging message is also increased.
The operator should monitor the load of paging channels and adjust
this parameter accordingly. Generally, this parameter is set to 6 or
7 in a region with high traffic load, 4 or 5 in a region with moderate
traffic load, and 2 or 3 in a region with low traffic load.
Because any paging message must be simultaneously transmitted
in all the cells in a location area, the paging channel capacity of
each cell (number of paging sub-channels in a cell) in a location
area should be the same or close as possible.
This parameter should be set as low as possible and the paging
Reason
channel should not be overloaded.
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.17.17 Early class-mark sending control

Full Name
Early class-mark sending control
Abbreviated Name
ecsc
2-658
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
Early Classmark Sending Control
3GPP Reference
N/A
Description
As defined in the GSM specification, if the early class mark sending

function is supported by both the MS and network, the MS sends
the additional class mark information (Class mark 3) to the network
through a CLASSMARK CHANGE message as soon as possible
after receiving an immediate assignment message.
Whether the network supports the early class mark sending function
is controlled by the parameter Early Class mark Sending Control
(ECSC).This parameter is broadcasted to the MS in a cell through
the message RIL3_RR SYSTEM INFORMATION TYPE3.
Instance
Cell
Related FG
N/A
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
If the cell is an extended GSM cell or dual-band cell, or there are
cells operating on another frequency band in the neighbor cell

list for handover, and the network supports the early class mark
sending function, this parameter is set to "allowed". Otherwise, this
parameter is set to "not allowed".
In most cases, a GSM network operates on two frequency bands.
Reason
It is recommended to enable this function.
Change take effect
No
2-659
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.17.18 CBC support

Full Name
CBC support
Abbreviated Name
smsCBUsed
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The Cell Broadcast (CBC) service is an important service provided

by a mobile communication system, which sends information
to the MSs in specified geographical areas. Different from a
point-to-point short message that sends information to a specified
subscriber, a cell broadcast short message sends information to
all the subscribers in a specified geographical area, including the
subscribers roaming to this area.
This parameter indicates whether this cell supports the CBC service.
Instance
Cell
Related FG
ZGO-01-03-004 Cell Broadcast Service
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
tsChannelComb
If this parameter is set to "No", the system automatically checks
Parameters
the channel types of all the physical channels in the cell. If a CBC
channel is defined, the system modifies the channel type to SDCCH.
If this parameter is set to "Yes", the system automatically checks
the channel types of all the physical channels in the cell, and
finds a non-BCCH channel and modifies the channel type to
SDCCH+CBCH.
2-660
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Whether this function is enabled depends on the operator's
requirement.
It is a feature function switch. By default, it is disabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.19 FreqBand
Full Name
FreqBand
Abbreviated Name
freqBand
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequency band supported by the

serving cell.
Instance
Cell
Related FG
ZGO-05-02-002 EGSM Frequency Band Support
0: GSM900\(1..124\)(GSM900\(1..124\))
1: EGSM900\(0 .. 124,975 .. 1023\)(EGSM900\(0..124,975..1023\))
2: DCS1800\(512 .. 885\)(DCS1800\(512..885\))
4: PCS1900\(512 .. 810\)(PCS1900\(512..810\))
7: GSM850\(128..251\)(GSM850\(128..251\))
2-661
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
N/A
Related Parameters
FuncExt
arfcn
Whether DCS1800/PCS1900 is supported affects the value range
Parameters
of this parameter.
This parameter affects the value range of the frequency parameter.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to actual conditions.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.20 Cell type

Full Name
Cell type
Abbreviated Name
cellType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the type of the serving cell.
2-662
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
N/A
0: Umbrella Cell
1: Macro Cell
2: Micro Cell)
3: Micro-micro Cell
4: Extended Cell
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.21 MAX number of re-transmitting events times

Full Name
MAX number of re-transmitting events times
Abbreviated Name
maxRetrans
Managed Object

2-663
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
Max retrans
3GPP Reference
N/A
Description
When an MS initiates an immediate assignment procedure for

location update, setting up a call, or responding to a paging
message, it transmits a channel request to the network on the
RACH.
Because the RACH is an ALOHA channel, to increase the MS
access success rate, an MS is allowed to transmit multiple channel
request messages before it receives an immediate assignment
message. This parameter indicates the maximum number of times
that a channel request message can be retransmitted.
This parameter is sent to the MS through the messages RIL3_RR
SYSTEM INFORMATION TYPE1, TYPE2, TYPE2bis, TYPE3, and
TYPE4.This parameter is one of the system control parameters.
For a cell whose radius is above 3 km and traffic load is low,
this parameter is set to 3 (a channel request message can be
retransmitted by a maximum of seven times) to increase MS access
success rate.
For a cell whose radius is below 3 km and traffic load is moderate,
this parameter is set to 2 (a channel request message can be
retransmitted by a maximum of four times).
For a microcell, the recommended value is 1 (a channel request
message can be retransmitted by a maximum of two times).
For a microcell with heavy traffic load and a cell obviously congested,
the recommended value is 0 (a channel request message can be
retransmitted only once).
Instance
Cell
Related FG
N/A
0: 1 times
1: 2 times
2: 4 times
3: 7 times
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-664
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
If the signal level or quality is poor, it is recommended to increase
this parameter value. For a satellite-access BTS, the MS may

retransmits an Access Burst (AB) due to the high delay on the Abis
interface, so it is recommended to decrease this parameter value.
To increase the access success rate, this parameter value should
Reason
be increased step by step.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.22 Number of slots to spread transmission

Full Name
Number of slots to spread transmission
Abbreviated Name
txInteger
Managed Object

3GPP Name
Tx_integer
3GPP Reference
N/A
Description
This parameter is one of the PRACH and RACH control parameters,

which is broadcasted to the MS through SI1, SI2, SI2bis, SI3, and
SI4. When a new connection is set up, an MS transmits a channel
request to the network on the PRACH or RACH. Because the RACH
is an ALOHA channel, to increase the MS access success rate,
an MS is allowed to transmit multiple channel request messages
before it receives a packet assignment message. If the previous
channel request is not responded to, the MS waits a random
period of time and retransmits a channel request. This parameter
is used for calculating the random period of time. The time interval
2-665
SJ-20140527134815-013|2015-03-10(R1.1)
between two channel request messages should be a random value

in {S,S+1,S+T-1}.
The relationship between S and T is described as follows:
When T is 3, 8, 14, or 50, S is 55 (CCCH) or 41 (CCH/SDCCH).
When T is 4, 9, or 16, S is 76 (CCCH) or 52 (CCH/SDCCH).
Instance
Cell
Related FG
N/A
0..15
Unit
N/A
Default Value
14
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When this parameter is set to 14, it means the time interval is the
maximum value. It is not recommended to modify this parameter

unless required.
The time interval between two channel request messages should be
Reason
increased to leave enough time for the network.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-666
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.23 Cell bar qualify

Full Name
Cell bar qualify
Abbreviated Name
cellBarQualify
Managed Object

3GPP Name
CELL_BAR_QUALIFY
3GPP Reference
N/A
Description
In an area covered by multiple cells, an MS is desired to preferably

select a specified cell based on the cell capacity, traffic load in a
cell, and functions of a cell. The CellBarQualify parameter enables
or disables this function. This parameter sets the cell priority
in special cases. As one of the cell selection parameters, this
parameter is broadcasted to all MSs in a cell through the messages
RIL3_RR SYSTEM INFORMATION TYPE3 and RIL3_RR SYSTEM
INFORMATION TYPE4.
Generally the CellBarAccess parameter is set to "No", and the
CellBarQulify parameter is set to "No" either. In this case, the cell
priority is defined as "normal". For a microcell or dual-band cell, an
MS is desired to select a specified cell. In this case, the priority of
this cell is set to "Normal", and the priorities of other cells are set to
"Low". This parameter does not affect cell reselection.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
CellBarAccess
The cell selection priority and cell reselection priority are as follows
Parameters
when the parameters CellBarQualify and CellBarAccess are set

to different values:
When CellBarQualify=0 and CellBarAccess=0, the cell selection
priority is normal and the cell reselection priority is normal.
priority is barred and the cell reselection priority is barred.
priority is low and the cell reselection priority is normal.
2-667
SJ-20140527134815-013|2015-03-10(R1.1)

priority is low and the cell reselection priority is normal.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To ensure the distribution of traffic to some specified cells, the
priorities of some cells are set to "Normal", and the priorities of some
other cells are set to "Low".
Generally the priority of a cell is set to "Normal".
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.24 Cell bar access

Full Name
Cell bar access
Abbreviated Name
cellBarAccess
Managed Object

3GPP Name
CELL_BAR_ACCESS
3GPP Reference
N/A
2-668
SJ-20140527134815-013|2015-03-10(R1.1)
Description
The operator determines whether an MS is allowed to camp on a

specified cell such as a testing cell or an incoming-handover-only
cell.
TYPE4.
The cell selection priority and cell reselection priority can
be determined by setting the parameters CellBarQualify and
CellBarAccess.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
By default, a cell should be allowed for an MS to camp on. Only in
special cases, for example, a cell is being tested or a cell is only

used for incoming handovers, the cell should be set to barred.
If a cell is barred, all the MSs in this cell cannot access to the
network.
In normal cases, a cell should not be set to barred.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

2-669
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.25 Call re-establishment allowed

Full Name
Call re-establishment allowed
Abbreviated Name
callReestablish
Managed Object

3GPP Name
RE
3GPP Reference
N/A
Description
If a call drop occurs due to radio link failure caused by burst

interference or coverage hole behind high buildings, an MS can
start a call re-establishment procedure to restore the dropped call.
However, the network determines whether the call is allowed or not
to be reestablished by setting the CallReestablish parameter.
TYPE4.
Instance
Cell
Related FG
ZGO-01-01-005 Call Re-establishment
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Call re-establishment can improve user experience, but
may increase wireless dropped-call rate. Because the call

re-establishment duration is long and subscribers often hang up
before the call is reestablished, this parameter is generally set to
"not allowed".
2-670
SJ-20140527134815-013|2015-03-10(R1.1)
Because the call re-establishment duration is long and subscribers
Reason
often hang up before the call is reestablished, this parameter is

set to "not allowed" by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.26 Emergency call allowed

Full Name
Emergency call allowed
Abbreviated Name
emergencyCall
Managed Object

3GPP Name
Emergency Call allowed
3GPP Reference
N/A
Description
Generally an MS can access GSM services only when it has a valid

Subscriber Identity Module (SIM), but for an MS without a SIM or
the SIM access class (one class of classes C0 to C9) is disabled by
the cell (indicated by system information, the MS cannot access to
the network through this cell), the operator determines whether the
MS can initiate an Emergency Call (EC) for such as police by setting
the EmergencyCall parameter.
As one of the network function parameters, this parameter is
broadcasted to the MS in a cell through the messages RIL3_RR
TYPE4.
If this parameter is set to "No", the MSs whose SIM access classes
are from 0 to 9 are not allowed to initiate an emergency call. For
the MSs whose SIM access classes are from 11 to 15, if the
corresponding access control bit is T, an emergency call is not
allowed either.
2-671
SJ-20140527134815-013|2015-03-10(R1.1)
If this parameter is set to "Yes", all the MSs are allowed to initiate
an emergency call.
As defined in the GSM specification, the emergency call number is
112. This parameter should be set to "Yes".
Instance
Cell
Related FG
ZGB-01-03-001 Emergency Call Handling
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
An emergency call is enabled or disabled based on the operator's
requirement.
In some countries or regions, an emergency call provides only
Reason
voice messages for subscribers but does not actually work, so this
parameter is set to "No" to save radio channels.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.27 Access Control

Full Name
Access Control
2-672
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
accessControl
Managed Object

3GPP Name
Access Control
3GPP Reference
N/A
Description
In a GSM network, an MS has an access class from 0 to 15 (15

classes in total because class 10 does not exist). The MSs whose
access classes are from 0 to 9 are common ones, and the MSs
whose access classes are from 11 to 15 are special ones. The
network may forbid some MSs with specified access classes
from accessing the cell, for example, during an installation and
commissioning procedure or congestion control procedure. As one
of the system control parameters, the AccessControl parameter is
broadcasted to the MSs in a cell through the messages RIL3_RR
TYPE4.
To control cell congestion, the operator can forbid one or more
access classes (for classes 0-9 in most cases) to decrease cell
congestion due to either CCCH overload or processor overload.
Generally the following overload situations may occur:
RACH overload: This situation is indicated in a CCCH LOAD
INDICATION message. The BSS processes overload based on
GSM08.58.
AGCH overload: The BSS fails to send an IMMEDIATE REJECT
message or IMMEDIATE ASSIGNMENT message. The BTS reports
this situation to the BSC through a DELETE INDICATION message.
PCH overload: This situation is indicated in a CCCH LOAD
INDICATION message. The BSS informs the MSC, and access
control is not performed.
Other overload: This situation is indicated by an OVERLOAD
message, for example, MTP overload.
Instance
Cell
Related FG
ZGB-03-01-001 MS Access Control
0..1
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[16]
2-673
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally some subscribers with specified access classes are
barred during an installation and commission procedure or

congestion control procedure.
Usually subscribers are not limited.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.28 Uplink discontinuous transmission

Full Name
Uplink discontinuous transmission
Abbreviated Name
dtxUplinkBcch
Managed Object

3GPP Name
DTX
3GPP Reference
N/A
Description
Discontinuous Transmission (DTX) means that signal transmission

is stopped during speech idle in a call.
This parameter indicates whether an MS can use DTX. This
parameter is broadcasted to all the MSs in a cell through the
RIL3_RR SYSTEM INFORMATION TYPE3 message. Furthermore,
the MSs in GSM phase 1 are notified about DTX through the
RIL3_RR SYSTEM INFORMATION TYPE6 message on the
SACCH, and the MSs in GSM phase 2 or later versions are
notified about DtxUplinkSacch through the RIL3_RR SYSTEM
2-674
SJ-20140527134815-013|2015-03-10(R1.1)
INFORMATION TYPE6 message. As one of the network function

parameters,
this parameter is set to 1 (DTX is used) if the BTS and TRAU
support the DTX function, otherwise, this parameter is set to 2 (DTX
is not used).
Instance
Cell
Related FG
ZGO-04-02-004 Discontinuous Transmission Uplink
0: May use uplink DTX

1: Shall use uplink DTX
2: Shall not use uplink DTX
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If DTX is not used, MS power consumption is high.
To save MS power consumption and decrease interferences caused
Reason
by radio signals, it is recommended to enable the DTX function.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.29 Protection period for access attempt

2-675
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Protection period for access attempt
Abbreviated Name
t3122
Managed Object

3GPP Name
T3122
3GPP Reference
N/A
Description
Upon receiving a channel request message from an MS, if no

channel is available, the BSC sends an IMMEDIATE ASSIGNMENT
REJECT message to the MS. To prevent radio channel congestion
caused by repeated channel request messages sent from the MS to
BSC, a timer T3122 (wait indication information unit) is sent to the
MS through the IMMEDIATE ASSIGNMENT REJECT message.
The MS can only initiate a new call after receiving the IMMEDIATE
ASSIGNMENT REJECT message and waiting for the time specified
by T3122. As one of the system control parameters, this parameter
is sent to the MS through an IMMEDIATE ASSIGNMENT REJECT
message.
Generally this parameter is set to 10-15 s, while in a dense traffic
area, this parameter is set to 15-25 s.
Instance
Cell
Related FG
ZGB-03-01-001 MS Access Control
0..255
Unit
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In most cases, 10-15 s is recommended, while in a dense traffic
area, 15-25 s is recommended. Because cell traffic change or cell

state change (restored to normal) is a long process, if this parameter
value is too small, a repeated request may still fail, and system
processing load is increased. If this parameter value is too large,
the user experience may be poor.
2-676
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is configured based on user experience and network
Reason
resources.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.30 Multi-band report indication

Full Name
Multi-band report indication
Abbreviated Name
mulbandReport
Managed Object

3GPP Name
MULTIBAND_REPORTING
3GPP Reference
N/A
Description
In a single-band GSM network, an MS sends measurement reports

of the six strongest neighbor cells in one frequency band to the
network.
In a multi-band network, an MS is desired to hand over to a neighbor
cell in a specified frequency band during a inter-cell handover, so
the MS should report the neighbor cell based on not only the signal
level, but also the frequency band.
As one of the system control parameters, the MulbandReport
parameter notifies the MS about how many neighbor cells in different
frequency bands should be contained in a measurement report.
This parameter is configured based on traffic load in each frequency
band. When traffic load in each frequency band is almost equivalent
and no frequency band is preferable, this parameter should be set
to 0. When traffic load in each frequency band is quite different and
a frequency band is preferable, this parameter should be set to 3.
Options for this parameter are as follows:
2-677
SJ-20140527134815-013|2015-03-10(R1.1)
0: An MS reports the measurement results of six strongest neighbor

cells with known allowed NCCs according to the signal strength
of neighbor cells no matter in which bands the adjacent cells are
located.
1: An MS reports the measurement results of one strongest
neighbor cell in each band of the neighbor cell list (except the band
of the current cell).If the number of reported neighbor cells is less
than 6, the MS reports the neighbor cell in the band of the current
cell. If the number of reported neighbor cells is still less than 6, the
MS reports the next strongest neighbor cells no matter in which
band the cells are.
2: An MS reports the measurement results of two strongest neighbor
cells in each band of the neighbor cell list (except the band of the
current cell).If the number of reported neighbor cells is less than 6,
the MS reports the neighbor cell in the band of the current cell. If
the number of reported neighbor cells is still less than 6, the MS
reports the next strongest neighbor cells no matter in which band
the cells are.
3: An MS reports the measurement results of three strongest
neighbor cells in each band of the neighbor cell list (except the band
of the current cell).If the number of reported neighbor cells is less
than 6, the MS reports the neighbor cell in the band of the current
cell. If the number of reported neighbor cells is still less than 6, the
MS reports the next strongest neighbor cells no matter in which
band the cells are.
Instance
Cell
Related FG
N/A
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-678
SJ-20140527134815-013|2015-03-10(R1.1)
In a dual-band GSM network, to make the 1800M cells share traffic
and ensure that MSs working in the 1800M band can hand over in
this band, the 900M cells are configured to report as many 1800M
neighbor cells as possible (this parameter is set to 3), and the
1800M cells are configured to report as few 900M neighbor cells as
possible (this parameter is set to 1).
In a dual-band network, if no cell in any frequency band is desired to
carry more traffic, this parameter is set to 0, which means neighbor
cells are reported only on the basis of signal strength.
Reasonable configuration can balance traffic load and relieve
congestion, but may affect the handover success rate, call drop
rate, and coverage.
Neighbor cells in each frequency band are guaranteed to be
Reason
reported.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.31 Redirection enable

Full Name
Redirection enable
Abbreviated Name
drInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-679
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether a directed retry procedure is used.

When the directed retry function is enabled, if there is no available
Traffic Channel (TCH) in the serving cell during an assignment
procedure, the BSC assigns a TCH of a neighbor cell to the MS
based on the measurement report.
This procedure is a special handover, which can decrease the
access failure rate. Directed retry falls into intra-BSC directed
retry and inter-BSC directed retry. For an intra-BSC directed retry
procedure, the MSC does not need to participate in, while for an
inter-BSC directed retry procedure, the MSC does.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
drIndInterBsc
When this parameter is set to "Yes", the external directed retry
Parameters
parameter can be set.

Only when both the system-level parameter InDrEnable and
cell-level directed retry parameter are set to "Yes", the directed retry
function is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
To increase the call completion rate in a high traffic area, it is
Reason
Change take effect
No
Access
Read/Write
OMC Access path


2-680
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.32 Outer redirection enable

Full Name
Outer redirection enable
Abbreviated Name
drIndInterBsc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether external directed retry (inter-BSC

directed retry) is enabled.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
drInd
When the directed retry parameter is set to "Yes", this parameter
Parameters
can be set.
Only when both this parameter and the OutDrEnable parameter are
set to "Yes", external directed retry is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is recommended to enable this function in the high traffic area at
the iBSC coverage edge.
Reason
Change take effect
No
2-681
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.17.33 Downlink discontinuous transmission allowed

Full Name
Downlink discontinuous transmission allowed
Abbreviated Name
dtxDwlink
Managed Object

3GPP Name
DTX
3GPP Reference
N/A
Description
Discontinuous Transmission (DTX) means that signal transmission

is stopped during speech idle in a call. This parameter indicates
whether DTX is used in downlink.
Actually, whether DTX is used in downlink is determined not only
by this parameter (carried in the CHANNEL ACTIVATION message
and MODE MODIFY message sent from the BTS to the MS), but
also by the indications carried in the ASSIGNMENT REQUEST
message and HANDOVER REQUEST message sent from the MSC
to the BSC.
Yes: DTX is used in downlink.
No: DTX is not used in downlink.
Instance
Cell
Related FG
ZGO-04-02-003 Discontinuous Transmission Downlink
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-682
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the DTX function is enabled, the BTS power consumption is
lowered, and intra-RAT interferences are reduced. From the whole

network point of view, frequency interferences can be reduced, and
network quality is improved.
If the MSC explicitly indicates that DTX should not be used in
downlink, downlink DTX is not used no matter how this parameter
is configured.
If the MSC allows DTX to be used, whether downlink DTX is used
or not is determined on related parameters.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.34 SI13 sending position

Full Name
SI13 sending position
Abbreviated Name
si13Locate
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-683
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is used by an MS. This parameter is broadcasted

to the MS through SI3, SI4, SI7, and SI8 in the cell, and PSI3 in
the neighbor cells, indicating the scheduling position of SI13 on
the BCCH.
SI13 is related only to GPRS services. SI13 can be transmitted
either on the BCCH Norm position (it occupies the BCCH block with
TC = 4, TC = (FN DIV 51) mod (8)) or on the BCCH Ext position (it
occupies a fixed AGCH block with TC = 0).
When SI13 is transmitted on the BCCH Ext position, the success
rate is low because other messages (for example, an IMMEDIATE
ASSIGNMENT message) may also occupy this position. In this
case, the number of blocks reserved for AGCHs (BsAgBlkRes in
the R_BTS table) must be greater than 0, otherwise, SI13 will not
be transmitted.
Instance
Cell
Related FG
N/A
0: BCCH Norm
1: BCCH Ext
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
BCCH Norm is configured based on the value recommended by the
GSM specification.
The default value recommended by the GSM specification is used
Reason
so that SI13 is broadcasted in time.
Change take effect
No
Access
Read/Write
OMC Access path

2-684
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.35 Queue allowed when assign

Full Name
Queue allowed when assign
Abbreviated Name
queueAssInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether queuing is allowed if there is no

available channel in the cell during an assignment procedure.
Instance
Cell
Related FG
ZGB-03-01-003 Queuing
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
QueueIndAss
AssQueEnable
The BSC-level parameters QueueIndAss and AssQueEnable are
Parameters
both associated to this parameter. Only when the three parameters

are set to "Yes", queuing is allowed.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is enabled only if required.
If this function is enabled, when there is no available resource, the

assignment procedure can obtain resources by queuing. Thus,
the call completion rate is increased, but the call setup duration is
increased.
Reason
2-685
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.36 Forced release indicate when assign

Full Name
Forced release indicate when assign
Abbreviated Name
preemptionAssInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether forced release is allowed during

an assignment procedure. The MSC sends the priority parameters
(including priority level, PCI, and PVI) to the BSC through an
assignment command message. If this message contains a high
priority level and a valid PCI (indicating this user can preempt
the channel of another user), the BSC can forcibly release the
connection of a user whose PVI is reset (indicating the channel of
this user can be preempted by another user) and then allocate the
released channel on this assignment request when no resource is
immediately assigned to the higher-priority user.
Instance
Cell
Related FG
ZGO-01-03-001 eMLPP
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
PreemptionIndAss
2-686
SJ-20140527134815-013|2015-03-10(R1.1)
When the BSC-level parameter PreemptionIndAss is set to "2:
Parameters
According to the cell", this parameter takes effect.
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
To ensure that high-priority users can obtain a channel during
an assignment procedure, the forced release function should

be enabled. If forced release may be used by the assignment
preemption strategy (AssPreemptstrategy), this function should be
enabled.
Forced release affects more on low-priority users. By default, the
Reason
forced release function is disabled. This function is enabled only

if required.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.37 Forced handover indication for assign

Full Name
Forced handover indication for assign
Abbreviated Name
forcedAssInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-687
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether forced handover is allowed during

an assignment procedure. The MSC sends the priority parameters
priority level and a valid PCI (indicating this user can preempt the
channel of another user), the BSC can hand over a user whose PVI
is reset (indicating the channel of this user can be preempted by
another user) to another cell and then allocate the released channel
on this assignment request when no resource is immediately
assigned to the higher-priority user.
Instance
Cell
Related FG
ZGO-01-03-001 eMLPP
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
ForcedHolndAss
When the BSC-level parameter ForcedHolndAss is set to "2:
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
To ensure that high-priority users can obtain a channel by forcibly
handing over other users out of the cell during an assignment

procedure, the forced handover function should be enabled.If forced
handover may be used by the assignment preemption strategy
(AssPreemptstrategy), this function should be enabled.
Forced handover affects the communication of lower-priority users
Reason
to a certain extent. By default, the forced handover function is

disabled. This function is enabled only if required.
Change take effect
No
Access
Read/Write
OMC Access path

2-688
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.38 Queue allowed when handover

Full Name
Queue allowed when handover
Abbreviated Name
queueHoInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether queuing is allowed if there is no

available channel in the cell during a handover procedure.
Instance
Cell
Related FG
ZGB-03-01-003 Queuing
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
QueueIndHo
HoQueEnable
The BSC-level parameters QueueIndHo and HoQueEnable are both
Parameters
associated to this parameter. Only when the three parameters are

set to "Yes", queuing is allowed.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is enabled only if required.
If this function is enabled, when there is no resource available, an

incoming handover procedure can obtain resources by queuing.
Reason
Change take effect
No
2-689
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.17.39 Forced release indicate when handover

Full Name
Forced release indicate when handover
Abbreviated Name
preemptionHoInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether forced release is allowed during

a handover procedure. The MSC sends the priority parameters
priority level and a valid PCI (indicating this user can preempt
the channel of another user), the BSC can forcibly release the
connection of a user whose PVI is reset (indicating the channel of
this user can be preempted by another user) and then allocate the
released channel on this handover request when no resource is
immediately assigned in this or later handover procedure.
Instance
Cell
Related FG
ZGO-01-03-001 eMLPP
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
PreemptionIndHo
When the BSC-level parameter PreemptionIndHo is set to "2:
Parameters
Value Type
long
2-690
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
To ensure that high-priority users can obtain a channel during a
handover procedure, the forced release function should be enabled.

If forced release may be used by the handover preemption strategy
(HoPreemptstrategy), this function should be enabled.
Forced release affects more on low-priority users. By default, the
Reason
forced release function is disabled. This function is enabled only

if required.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.40 Forced handover indication for handover

Full Name
Forced handover indication for handover
Abbreviated Name
forcedHoInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-691
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether forced handover is allowed during

a handover procedure. The MSC sends the priority parameters
priority level and a valid PCI (indicating this user can preempt the
channel of another user), the BSC can forcibly handover a user
whose PVI is reset (indicating the channel of this user can be
preempted by another user) to another cell and then allocate the
released channel on this handover request when no resource is
immediately assigned in this or later handover procedure.
Instance
Cell
Related FG
ZGO-01-03-001 eMLPP
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
ForcedHolndHo
When the BSC-level parameter ForcedHolndHo is set to "2:
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
To ensure that high-priority users can obtain a channel by forcibly
handing over other users out of the cell during an assignment

procedure, the forced handover function should be enabled. If
forced handover may be used by the handover preemption strategy
(HoPreemptstrategy), this function should be enabled.
Forced handover affects the communication of lower-priority users
Reason
to a certain extent. By default, the forced handover function is

disabled. This function is enabled only if required.
Change take effect
No
Access
Read/Write
OMC Access path

2-692
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.41 Cipher mode priority 1

Full Name
Cipher mode priority 1
Abbreviated Name
cipherModePrio1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter records the priority level of the current cipher mode
supported by the cell. There are seven priority levels indicated by
cipherModePrio1 to cipherModePrio7 from the highest priority to the
lowest priority. For example, a cell is configured to support three
cipher modes: "0: Not Support", "1: A5/1", and "3: A5/3". If the
cipherModePrio1 parameter is set to "1: A5/1", the cipherModePrio2
parameter is set to "3: A5/3", and the cipherModePrio3 parameter
is set to "0: Not Support", the priority levels of these three cipher
modes fulfill this relation: "A5/1" > "A5/3" > "Not support".
Instance
Cell
Related FG
ZGB-06-02-001 A5/1 Ciphering Algorithm
0: Not Support
1: A5/1
2: A5/2
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-693
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
Yes
Function Switch
No
This parameter should be modified together with the related
parameters of the core network. The cipher modes A5/4 to A5/7

are not supported in this version.

Reason
By default, this parameter is set to "0: Not Support". This parameter

should be configured according to negotiations with the core
network. The cipher modes A5/4 to A5/7 are not supported in this
version.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
cipherModePrio2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
2-694
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
N/A
0: Not Support
1: A5/1
2: A5/2
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No

Reason

version.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-695
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
cipherModePrio3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
ZGO-06-02-001 A5/3 Ciphering Algorithm
0: Not Support
1: A5/1
2: A5/2
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
2-696
SJ-20140527134815-013|2015-03-10(R1.1)

Reason

version.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
cipherModePrio4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
ZGO-06-02-004 A5/4 Ciphering Algorithm
2-697
SJ-20140527134815-013|2015-03-10(R1.1)
0: Not Support
1: A5/1
2: A5/2
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No

Reason

version.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

2-698
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
cipherModePrio5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
0: Not Support
1: A5/1
2: A5/2
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No

2-699
SJ-20140527134815-013|2015-03-10(R1.1)
Reason

version.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
cipherModePrio6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
2-700
SJ-20140527134815-013|2015-03-10(R1.1)
0: Not Support
1: A5/1
2: A5/2
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No

Reason

version.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

2-701
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
cipherModePrio7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
0: Not Support
1: A5/1
2: A5/2
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No

2-702
SJ-20140527134815-013|2015-03-10(R1.1)
Reason

version.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.48 Preprocessing indication

Full Name
Preprocessing indication
Abbreviated Name
preprocess
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The measurement report contains the largest amount of messages

on the Abis interface. To reduce the load on the Abis interface, the
BTS preprocesses measurement reports before transferring them to
the BSC. In pre-processing, the BTS averages the measurement
results from the MS (downlink measurement) and averages the
measurement results from its own (uplink measurement), and
reports the average results to the BSC in a lower frequency.
The average and reporting period may be two, three, or four SACCH
multiframes (480 ms). It means that the frequency decreases
from the original twice per second to once per two seconds, so
the message amount on the Abis interface decreases. However,
whether the message amount decreases or not depends also on the
message length before and after pre-processing. One disadvantage
of pre-processing is that the handover control and power control
are not performed in time, which may increase the dropped-call
2-703
SJ-20140527134815-013|2015-03-10(R1.1)
rate. This parameter indicates whether pre-processing is used and

the pre-processing period.
0: Not Support
2: Preprocess, 2 SACCH block period
18: Preprocess on TCH, 2 SACCH block period
Instance
Cell
Related FG
N/A
0: Not Support
2: Preprocess,2 SACCH block period
18: Preprocess on TCH,2 SACCH block period
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is recommended to disable all pre-processing.
If the pre-processing period is low, handovers are performed

more frequently. The handover success rate is increased, but the
dropped-call rate is increased and the coverage is decreased.
If the pre-processing period is high, handovers are delayed, the
dropped-call rate is increased and the coverage is decreased.
Generally the BSC CMP load is not high, and the Abis transmission
Reason
resource is sufficient, so pre-processing is not used. Thus, handover

can be triggered in time, and mobility performance is guaranteed.
Change take effect
No
2-704
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.17.49 Fast average indication

Full Name
Fast average indication
Abbreviated Name
fastAvg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Only after receiving a certain number of measurement reports, can

the BTS calculate the average value for power control. Sometimes
power control may fail due to less measurement reports during a call.
For example, if the threshold for average calculation is 8, while only
five measurement values are received, general average cannot
be performed. In this case, a fast average algorithm can be used
to calculate the average of the received five measurement values.
After one power control, the old measurement values become
useless. Therefore, the old measurement values for power control
must be discarded.
Instance
Cell
Related FG
ZGO-04-02-001 Dynamic BTS Power Control

ZGO-04-02-002 Dynamic MS Power Control
ZGO-04-02-017 Downlink Rapid Power Control
1: Allowed
0: Not allowed
Unit
N/A
Default Value
Related Parameters
N/A
2-705
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
For an SDR BTS, it is recommended to enable fast average so that
power control is started earlier.
This function can be disabled for a V3 BTS.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.50 Allowed FACCH call setup after emergency call

Full Name
Allowed FACCH call setup after emergency call
Abbreviated Name
facchCallEmgCall
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When an MS attempts to access the network, and whether there is

available SDCCH in the cell, the BSC can assign a TCH to the MS if
required. This is called FACCH call establishment.
Instance
Related FG
Cell
ZGB-03-01-004 Immediate TCH Assignment
2-706
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If this function is enabled, the call completion delay can be shorten.
However, radio resources are wasted because a TCH is used as

an SDCCH.
It is recommended to enable this function only if an emergency call
requires to be preferred and the call completion delay requires to
be short.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.51 Allowed FACCH call setup when paging respond

Full Name
Allowed FACCH call setup when paging respond
Abbreviated Name
facchCallPagResp
Managed Object

2-707
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
When an MS attempts to access the network, and there is no

Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

an SDCCH.
This function is enabled only if actually required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2-708
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.52 Allowed call setup on FACCH

Full Name
Allowed call setup on FACCH
Abbreviated Name
facchCallMo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When an MS attempts to access the network, and there is no

Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

an SDCCH.
Reason
Change take effect
No
Access
Read/Write
2-709
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.17.53 Allowed call reestablished on FACCH

Full Name
Allowed call reestablished on FACCH
Abbreviated Name
facchCallCallReEst
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When an MS attempts to access the network, and whether there is

Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

an SDCCH.
Reason
2-710
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.54 Minimal resource threshold

Full Name
Minimal resource threshold
Abbreviated Name
resourceThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum resource threshold allowed

by the cell. It is used to calculate the dynamic cell priority.
Instance
Cell
Related FG
ZGO-02-02-002 Dynamic Handover Priority Algorithm
0..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-711
SJ-20140527134815-013|2015-03-10(R1.1)
The minimum resource threshold must be greater than 10 because
it is described with a logarithm. It is not recommended to modify

this parameter. The relationship between this parameter and the
dynamic priority algorithm is not linear correlation, so the calculation
is relatively complicate.
This parameter affects much on the dynamic priority algorithm.
Reason
Generally the default value is recommended.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.55 PCH load indication period

Full Name
PCH load indication period
Abbreviated Name
ccchLoadIndPrd
Managed Object

3GPP Name
CCCH Load Indication Period
3GPP Reference
N/A
Description
According to the GSM specification, when the PCH (or RACH) load
of a BTS exceeds the overload threshold specified by O&M within a
PCH (or RACH) overload measurement period, the BTS periodically
sends the CCCH LOAD INDICATION message to the BSC until the
PCH (or RACH) load is below the threshold.
Instance
Cell
Related FG
1..255
Unit
Default Value
2-712
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
It is not recommended to modify this parameter.
Two seconds are enough for reporting overload and overload
Reason
recovery in time.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.56 CCCH load indication (RACH)

Full Name
CCCH load indication (RACH)
Abbreviated Name
CcchLoadINDThs_0
Managed Object

3GPP Name
CCCH Load Threshold
3GPP Reference
N/A
Description
When the RACH load of a BTS exceeds the threshold, the BTS
periodically sends the CCCH LOAD INDICATION message to the
iBSC until the RACH load is below this threshold.
Instance
Cell
Related FG
2-713
SJ-20140527134815-013|2015-03-10(R1.1)
0..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
When the RACH load is over 80%, the channel is considered as
Reason
busy.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.57 CCCH load indication (PCH)

Full Name
CCCH load indication (PCH)
Abbreviated Name
CcchLoadINDThs_1
Managed Object

3GPP Name
CCCH Load Threshold
3GPP Reference
N/A
2-714
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When the PCH load of a BTS exceeds the threshold, the BTS
periodically sends the CCCH LOAD INDICATION message to the
iBSC until the PCH load is below this threshold.
Instance
Cell
Related FG
0..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
When the PCH load is over 80%, the channel is considered as busy.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.58 Interference average period

Full Name
Interference average period
Abbreviated Name
interfAvgPrd
Managed Object
2-715
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
INTAVE
3GPP Reference
N/A
Description
The BTS measures interferences on the unassigned channels,

calculates the average of the latest measurement values in a certain
period, and converts the average into corresponding interference
band information. The information is sent to the BSC through an RF
RESOURCE INDICATION message, and is considered as one of
the factors of channel allocation.
Instance
Cell
Related FG
ZGO-03-02-001 Idle Channel Measurement
1..31
Unit
N/A
Default Value
31
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter value is too small, radio resources are frequently
reported, and the BSC load is increased.

If this parameter value is too large, radio resources are not timely
updated, and modifications cannot be correctly shown.
Generally, a long period can be set because the fluctuation of uplink
Reason
interference is small.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-716
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.59 Interference Band Boundary

Full Name
Interference Band Boundary
Abbreviated Name
interfBoundary
Managed Object

3GPP Name
[0,X1,X2,X3,X4,X5]
3GPP Reference
N/A
Description
The BTS measures interferences on the unassigned channels,

calculates the average of the latest measurement values in a certain
period, and converts the average into corresponding interference
band information. The information is sent to the BSC through an RF
RESOURCE INDICATION message, and is considered as one of
the factors of channel allocation.
The interface boundaries are used for converting an interference
(average) value into corresponding interference band information.
There are five interference bands defined by six boundaries.
Actually boundary 0 and 5 are not necessary, because boundary 0 is
infinity and boundary 5 is negative infinity. This parameter indicates
the remaining four boundaries.
Generally boundary 1-4 are set between -85 dBm and -115 dBm.
Instance
Cell
Related FG
ZGO-03-02-001 Idle Channel Measurement
0..63
Unit
N/A
Default Value
[0,10,15,20,25,63]
Related Parameters
N/A
N/A
Parameters
Value Type
long[6]
Parameter Type
Negotiation With CN
No
Function Switch
No
If two interference boundaries are too close, the interference
modification is too sensitive. If two interference boundaries are too

far, the interference modification cannot easily be shown.
2-717
SJ-20140527134815-013|2015-03-10(R1.1)
The interference boundaries are determined based on the
Reason
interference range measured in a live network.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.60 MAX resending times for physical information

Full Name
MAX resending times for physical information
Abbreviated Name
ny1
Managed Object

3GPP Name
Ny1
3GPP Reference
N/A
Description
According to the GSM specification, during an asynchronous

handover, the BTS transmits a TA value that should be used in the
cell to the MS through an RIL3_RR PHYSICAL INFORMATION
message. After sending the first RIL3_RR PHYSICAL
INFORMATION message, the BTS starts a timer T3105. If a layer2
frame or TCH frame cannot be decoded when the timer expires, the
BTS retransmits the RIL3_RR PHYSICAL INFORMATION message
and restarts the timer T3105.
The parameter NY1 (the Max Number of Repetition) determines
the maximum number of times that the RIL3_RR PHYSICAL
INFORMATION message is retransmitted.
Instance
Cell
Related FG
5..35
Unit
N/A
Default Value
20
2-718
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If NY1 is too low, the number of times of retransmission is reduced,
and the transmission success rate is decreased.

If NY1 is too high, radio resources are wasted.
When the handover is slow or the handover success rate is low due
to bad clock or poor transmission, this parameter can be increased.
The default value is set according to the maximum interaction delay
Reason
on the air interface.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.61 RACH load indication period

Full Name
RACH load indication period
Abbreviated Name
overloadPrd
Managed Object

3GPP Name
Overload Period
3GPP Reference
N/A
2-719
SJ-20140527134815-013|2015-03-10(R1.1)
Description
According to the GSM specification, when the Access Burst

(AB) power level on the RACH exceeds a predefined threshold
(RACHBusyThs), this AB is considered as a busy burst. In an RACH
overload measurement period, when the percentage of the number
of busy bursts to the number of ABs exceeds a threshold set by the
O&M, the BTS reports a CCCH LOAD INDICATION message.
Instance
Cell
Related FG
1..255
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Two seconds are enough for reporting overload and overload
Reason
recovery in time.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.62 Average bursts count surveyed by RACH

Full Name
Average bursts count surveyed by RACH

2-720
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
avgSlots
Managed Object

3GPP Name
RACH Load Averaging Slots
3GPP Reference
N/A
Description
This parameter indicates the number of measured bursts (AvgSlots)

on the RACH, and is used by the BTS. If the receiving signal level of
bursts is higher than RachBusyThs and the number of bursts is as
many as AvgSlots, the RACH is overloaded.
Instance
Cell
Related FG
0..100
Unit
N/A
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
An empirical value should be set according to the access busy
Reason
extent.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-721
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.63 RACH receiving signal level threshold for busy burst

Full Name
RACH receiving signal level threshold for busy burst
Abbreviated Name
rachBusyThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the receiving signal level threshold used to

determine whether an RACH is busy. If the measured signal level is
lower than -RachBusyThs dBm, the RACH is considered as busy.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
63
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is too small, BTS is more likely to consider
the RACH as busy and report overload indication to the BSC. It is

recommended to use the default value.
If this parameter value is too small, the BTS is more likely to report
Reason
overload indication to the BSC, so the default value is set to large.
Change take effect
No
Access
Read/Write
OMC Access path

2-722
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.64 Times of N200 for SDCCH

Full Name
Times of N200 for SDCCH
Abbreviated Name
N200forSDCCH
Managed Object

3GPP Name
N200
3GPP Reference
N/A
Description
N200 is the number of times that various control channels in LAPDm

are retransmitted. This parameter indicates the times of N200 for
SDCCHs.
Instance
Cell
Related FG
N/A
1..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter value is too large, the number of retransmission is
increased. The retransmission may be successful, but the channel

may be occupied in a long time.
The default value is set to the value recommended by the GSM
Reason
specification.
Change take effect
No
2-723
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.17.65 Times of N200 for FACCH_F

Full Name
Times of N200 for FACCH_F
Abbreviated Name
N200forFACCHF
Managed Object

3GPP Name
N200
3GPP Reference
N/A
Description

FACCH/F.
Instance
Cell
Related FG
N/A
1..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-724
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
specification.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.66 Times of N200 for FACCH_H

Full Name
Times of N200 for FACCH_H
Abbreviated Name
N200forFACCHH
Managed Object

3GPP Name
N200
3GPP Reference
N/A
Description

FACCH/H.
Instance
Cell
Related FG
N/A
1..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-725
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No

Reason
specification.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.67 Times of N200 for SACCH

Full Name
Times of N200 for SACCH
Abbreviated Name
N200forSACCH
Managed Object

3GPP Name
N200
3GPP Reference
N/A
Description

SACCHs.
Instance
Cell
Related FG
N/A
1..7
Unit
N/A
Default Value
Related Parameters
N/A
2-726
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
specification.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.68 Times of N200 for establish

Full Name
Times of N200 for establish
Abbreviated Name
N200forEstablish
Managed Object

3GPP Name
N200
3GPP Reference
N/A
Description

channel establishment.
Instance
Cell
Related FG
N/A
2-727
SJ-20140527134815-013|2015-03-10(R1.1)
1..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
specification.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.69 Times of N200 for Release

Full Name
Times of N200 for Release
Abbreviated Name
N200forRelease
Managed Object

3GPP Name
N200
3GPP Reference
N/A
2-728
SJ-20140527134815-013|2015-03-10(R1.1)
Description

channel release.
Instance
Cell
Related FG
N/A
1..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
specification.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.70 Interval of SDCCH re-sending PHY info message

Full Name
Interval of SDCCH re-sending PHY info message
Abbreviated Name
t3105d
2-729
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
T3105
3GPP Reference
N/A
Description
This parameter indicates the time interval between a repeated

RIL3_RR PHYSICAL INFOMATION message and the last one
during an asynchronous handover on the SDCCH.
Timer start: When the network sends an RIL3_RR PHYSICAL
INFOMATION message, the timer starts.
Timer stop: When the network receives a correctly decoded layer2
frame or receives a HANDOVER FAILURE message from the old
channel, the timer stops.
Timeout action: After the timer expires, the RIL3_RR PHYSICAL
Instance
Cell
Related FG
1..67
Unit
N/A
Default Value
28
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Physical information is sent on the FACCH, which is transmitted
once per four TDMA frames (18 ms).So 20 ms is actually a

reasonable minimum value. It is not necessary to decrease this
value.
If this parameter value is too small, much redundant information
may be transmitted.
If this parameter value is too large, the MS access delay is affected
in poor radio conditions.
The default value is set according to the minimum interaction delay
Reason
Change take effect
No
2-730
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.17.71 Interval of TCH re-sending PHY info message

Full Name
Interval of TCH re-sending PHY info message
Abbreviated Name
t3105f
Managed Object

3GPP Name
T3105
3GPP Reference
N/A
Description
This parameter indicates the time interval between a repeated

RIL3_RR PHYSICAL INFOMATION message and the last one
during an asynchronous handover on the TCH.
Timer start: When the network sends an RIL3_RR PHYSICAL
INFOMATION message, the timer starts.
Timer stop: When the network receives a correctly decoded layer2
frame or receives a HANDOVER FAILURE message from the old
channel, the timer stops.
Timeout action: After the timer expires, the RIL3_RR PHYSICAL
Instance
Cell
Related FG
1..32
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-731
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Physical information is sent on the FACCH, which is transmitted
once per four TDMA frames (18 ms).So 20 ms is actually a

reasonable minimum value. It is not necessary to decrease this
value.
If this parameter value is too small, much redundant information
may be transmitted.
If this parameter value is too large, the MS access delay is affected
in poor radio conditions.
The default value is set according to the minimum interaction delay
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.72 TA Max
Full Name
TA Max
Abbreviated Name
taMax
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum TA supported by the

extended TRX. It defines the maximum coverage range. An MS
farther away from the BTS than TaMax cannot access this cell or
will be dropped.
Instance
Cell
2-732
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
ZGO-04-01-001 Extended Cell Coverage
{cellType==0}[0..63],
{cellType==1}[0..63],
{cellType==2}[0..63],
{cellType==3}[0..63],
{cellType==4}[0..219]
Unit
N/A
Default Value
{cellType==0}63,
{cellType==1}63,
{cellType==2}63,
{cellType==3}63,
{cellType==4}219
Related Parameters
CellType
DistanceThs
When the cell type is common cell, the value range is 0-63.
Parameters
When the cell type is extended cell, the value range is 0-219.
The DistanceThs parameter for handover control must not be
greater than the maximum TA in a cell.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set according to the cell type (common cell or
extended cell).For a common cell, this parameter is set to 63. For

an extended cell, this parameter is set to 219.
For a common cell, the maximum coverage range is 35 km, and the
Reason
corresponding TA is 63.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2-733
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.73 TA allowed
Full Name
TA allowed
Abbreviated Name
taAllowed
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum TA allowed for access in a

cell. If the access delay of the channel request from an MS exceeds
the maximum TA in the cell, the MS is not allowed to access this cell.
Instance
Cell
Related FG
N/A
{cellType==0}[0..63],
{cellType==1}[0..63],
{cellType==2}[0..63],
{cellType==3}[0..63],
{cellType==4}[0..219]
Unit
N/A
Default Value
{cellType==0}63,
{cellType==1}63,
{cellType==2}63,
{cellType==3}63,
{cellType==4}219
Related Parameters
AttributeModeInd
The CellType parameter value affects the value range and default
Parameters
value of this parameter.

When the configuration message format indication is set to support
TLV, this parameter takes effect.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To reduce the cell coverage for user access, TaAllowed can be
decreased.
By default, a cell is defined as a common cell. An extended cell
Reason
is unusual.
2-734
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.17.74 Allow SOLSA MS to access

Full Name
Allow SOLSA MS to access
Abbreviated Name
exc_Acc
Managed Object

3GPP Name
EXC_ACC
3GPP Reference
N/A
Description
If the PBCCH is configured, this parameter is broadcasted to the

MSs in a cell through PSI3 and PSI3bis. If the PBCCH is not
configured, this parameter is sent to the specified MS through
the PACKET CELL CHANGE ORDER message or PACKET
MEASUREMENT ORDER message in some cases. This parameter
prevents the MS without Support of Localized Service Area (SoLSA)
exclusive access rights from camping on the cell. When this
parameter is set to 0, it means that the MSs with SoLSA exclusive
access rights are not allowed to camp on the cell. When this
parameter is set to 1, it means that the MSs with SoLSA exclusive
access rights are allowed to camp on the cell. SoLSA refers to a
localized service area consisting of a cell or a number of cells. The
cells constituting an LSA may not necessarily provide contiguous
coverage.
Instance
Cell
Related FG
N/A
0..1
Unit
N/A
2-735
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the operator's requirement. For a
cell that SoLSA exclusive access is used, this parameter is set to 1,

otherwise, this parameter is set to 0.
Generally the MSs without SoLSA exclusive access rights are
Reason
allowed to camp on the cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.75 Repeated ACCH support

Full Name
Repeated ACCH support
Abbreviated Name
repeatACCH
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-736
SJ-20140527134815-013|2015-03-10(R1.1)
Description
To guarantee the radio link quality, the signaling coding scheme

should be at least as robust as the strongest speech coding
scheme. But in the AMR coding algorithm, the robustness of the
signaling coding scheme is less than that of the low-rate speech
coding scheme. The downlink FACCH robustness that affects the
FACCH signaling success rate during a handover can be increased
by repeating FACCH blocks. The SACCH robustness can also be
increased by repeating SACCH blocks.
Instance
Cell
Related FG
ZGO-04-02-009 Repeated FACCH/SACCH
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
If the AMR function is enabled, it is recommended to enable this
function so that the establishment success rate can be increased.

However, few MSs support SACCH repeat.
As a new feature, the default value is set to "Off" to keep consistency
Reason
with the previous version.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-737
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.76 Frequency offset correct support

Full Name
Frequency offset correct support
Abbreviated Name
freqOffsetCorect
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether frequency shift correction is

supported. This function can correct Doppler shifts caused by
fast motion in high-speed railway and GSM-R, and improve uplink
receiving performance.
Instance
Cell
Related FG
N/A
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In a high-speed coverage area such as high-speed railway and
express way, this parameter is set to "Support".
In general cases, the most MSs do not move fast, so frequency
Reason
correction is not required.
Change take effect
No
Access
Read/Write
2-738
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.17.77 Maximum power on handover command support

Full Name
Maximum power on handover command support
Abbreviated Name
hoCmdMaxPwr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether handover commands can be

transmitted at the maximum power.
Instance
Cell
Related FG
ZGO-02-02-019 Handover Command Power Boost
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If handover commands are transmitted at the maximum power,
it causes interferences. In the areas with poor coverage, this

parameter can be set to "Support" to increase the success rate of
receiving handover commands by the MS.
If handover commands are transmitted at the maximum power, it
Reason
causes interferences. So this parameter is set to "Not Support" if

the handover success rate is normal.
2-739
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.78 TA MIN
Full Name
TA MIN
Abbreviated Name
taMin
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum TA supported for access in

a cell. In a concentric cell, both this parameter and the TaAllowed
parameter limit the allowed access range of the outer cell.
Instance
Cell
Related FG
{cellType==0}[0..63],
{cellType==1}[0..63],
{cellType==2}[0..63],
{cellType==3}[0..63],
{cellType==4}[0..219]
Unit
N/A
Default Value
Related Parameters
AttributeModeInd
The CellType parameter value affects the value range and default
Parameters
value of this parameter.

When the configuration message format indication is set to support
TLV, this parameter takes effect.
2-740
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In a concentric cell, the outer cell resources are not allocated to the
MSs close to the BTS by increasing TaMin.
By default a cell is not a concentric cell, and all the MSs in the cell
Reason
coverage can access the cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.79 8PSK modulating power attenuation level

Full Name
8PSK modulating power attenuation level
Abbreviated Name
tn7LowerLevel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the attenuation level for 8PSK modulation

power. If there is a channel on the BCCH TRX uses 8PSK
modulation, the parameter is set to ensure that the BCCH TRX is
transmitted at a constant power.
Instance
Cell
Related FG
N/A
0..50
Unit
N/A
2-741
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
AttributeModeInd
Only when the TLV parameter is set to support, this parameter
Parameters
takes effect.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This function is not supported in this version. The 8PSK modulation
power of the channel on the BCCH TRX is decreased by 2 dB by

default
Only if TLV format is supported, this parameter takes effect.
The default value is not modified.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.80 Access class parameter config select

Full Name
Access class parameter config select
Abbreviated Name
accConfigSelect
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable the user access

control function based on SIMs.
This switch controls one cell.
2-742
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG

parameters
control parameters
parameters
parameters
Unit
N/A
Default Value
Related Parameters
GBssFunction. Accconfigselect
When manual user access control is started, the automatic system
Parameters
flow control is unconditionally stopped.

When the manual user access control parameter defined in the BSC
is inconsistent with this parameter, this parameter is finally used.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter allows manual flow control, so it is tuned based on
actual network load.
Generally manual flow control is not required, so this switch is
Reason
turned off by default.
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2-743
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.81 Cell access control support

Full Name
Cell access control support
Abbreviated Name
useCellAcc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates that the SIM-based user access control

parameter in the cell is a cell-level parameter or a BSC-level
parameter.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
GBssFunction.AccessControl
When this parameter is set to 0, the BSC-level AccessControl
Parameters
parameter takes effect.

When this parameter is set to 1, the cell-level AccessControl
parameter takes effect.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If all the cells of a BSC uses the same access control policy, this
parameter is set to 0.If the cells of a BSC uses different access

control policies, this parameter is set to 1.
By default, this parameter can be set to different values for cells.
Reason
Change take effect
No
Access
Read/Write
2-744
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.17.82 Strategy for E-Utran Neighbour Select When Release

Full Name
Strategy for E-Utran Neighbour Select When Release
Abbreviated Name
RelEUtranStrategy
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates which type of E-UTRAN neighbor cells

are carried on a channel release message so that an MS can fast
reselect the E-UTRAN cell after a call ends in GSM.
When the parameter is set to 0, the measured E-UTRAN neighbor
cells with a high signal level are carried on the channel release
message.
When the parameter is set to 1, the configured E-UTRAN neighbor
cells are carried on the channel release message.
When the parameter is set to 2, the measured E-UTRAN neighbor
cells with a high signal level are preferred to be carried on the
channel release message. If no suitable cell is available, the
configured E-UTRAN neighbor cells are carried on the channel
release message.
Instance
Cell
Related FG
ZGO-02-03-014 Fast Return to E-UTRAN
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-745
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
Generally this parameter is set to 0. If the MS does not measure
E-UTRAN neighbor cells so that more time is left for it to measure

GSM/UTRAN neighbor cells, this parameter is set to 1, but the
E-UTRAN reselection neighbor cells are not accurate.
It is more precise to determine E_UTRAN reselection neighbor cells
Reason
according to the measurement report.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.17.83 E-Utran FDD and TDD Prio When Release

Full Name
E-Utran FDD and TDD Prio When Release
Abbreviated Name
RelEUtranPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates which type of E-UTRAN neighbor cells

(FDD neighbor cells or TDD neighbor cells) are preferred to be
carried on a channel release message so that an MS can fast
reselect the E-UTRAN cell after a call ends in GSM.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
0
2-746
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be set according to the network configuration
and operator requirements.
This parameter has the following four options:
Reason
0: E-UTRAN TDD neighbor cells are preferred.

1: E-UTRAN FDD neighbor cells are preferred.
2: Only E-UTRAN TDD neighbor cells.
3: Only E-UTRAN FDD neighbor cells.
This parameter should be set according to the network configuration
and operator requirements.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.17.84 Support Emergency call preemption

Full Name
Support Emergency call preemption
Abbreviated Name
EmergCallPreempt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-747
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether a user can be forcibly released

when no resource is available for an emergency call. There may
be no resource available for an emergency call in the following
three cases: 1) If a proper channel is not available during initial
access, it is required to add a forcible release processing flow to
support the emergency call.2) If a proper channel is not available
during assignment, it is required to modify the forcible release
processing flow about an emergency call.3) If no radio resource is
available during handover, it is required to forcibly release a user
to support the emergency call. When this parameter is set to 1, a
user can be forcibly released to support an emergency call. When
this parameter is set to 0, no user will be forcibly released to support
an emergency call.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally this parameter is set to 1 unless the operator requires it
to be 0.
An emergency call should be preferably processed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path


2-748
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.85 BA show
Full Name
BA show
Abbreviated Name
bcchBaInd
Managed Object

3GPP Name
BA ind
3GPP Reference
N/A
Description
This parameter refers to BCCH Allocation (BA) indication on the

BCCH.A neighbor cell list can be broadcasted on the BCCH
or sent on the SACCH, and the neighbor cell list on the BCCH
may be different from that on the SACCH. When an MS sends a
measurement report about neighbor cells, it references the neighbor
cell list on either BCCH or SACCH. To uniquely identify a neighbor
cell list, different BA indications are added to the neighbor cell lists
on the BCCH and SACCH.
This parameter indicates the BA indication value for the neighbor
cell list on the BCCH. The BA indication value of the neighbor cell
list on the SACCH is the logical negation of this parameter value.
When this parameter is set to 0, the BA_IND on the BCCH (SI2,
SI2bis, and SI2ter) is 0, and the BA_IND on the SACCH (SI5,
SI5bis, and SI5ter) is 1.
When this parameter is set to 1, the BA_IND on the BCCH (SI2,
SI2bis, and SI2ter) is 1, and the BA_IND on the SACCH (SI5,
SI5bis, and SI5ter) is 0.
Instance
Cell
Related FG
N/A
0: BA_IND is 0 on BCCH,1 on SACCH

1: BA_IND is 1 on BCCH,0 on SACCH
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-749
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Generally the default value is recommended unless the operator
requires it to be modified.
The two options are not different for the function. The default value
Reason
is one of the two options.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.86 Support CS paging prefer PS Assignment

Full Name
Support CS paging prefer PS Assignment
Abbreviated Name
CsPagingPrefer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the priority of a CS paging

message is higher than that of a PS assignment message. To
guarantee the paging success rate, this parameter is added.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
2-750
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set according to the operator's requirement.
By default, the priorities of CS paging and PS assignment are the
Reason
same. This parameter is set to "No" unless the operator requires

this function.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.87 Channel Select Strategy

Full Name
Channel Select Strategy
Abbreviated Name
chanSelectstrategy
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets a channel assignment mode for users in each

priority level so that a higher-priority user can preferentially obtain
a channel.
Instance
Cell
2-751
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
ZGO-01-03-001 eMLPP
0: According to channel select order of MSC, when prefer TCHF

and cell congest\(allocation threshold of HR is exceeded\)change
to prefer TCHH
1: Prefer TCHF, when cell congest \(allocation threshold of HR is
exceeded\),change to prefer TCHH
2: Prefer TCHH
3: TCHF only, not allocate TCHH
4: TCHH only, not allocate TCHF
5: According to channel select order of MSC, not consider whether
cell congest
6: According to channel select order of MSC, when prefer TCHF
and cell congest \(allocation threshold of HR is exceeded\) change
to prefer TCHH if AMR-HR supported
7: Prefer TCHF, not consider whether cell congest
8: Prefer TCHF, when cell congest \(allocation threshold of HR is
exceeded\),change to prefer TCHH if AMR-HR supported
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[15]
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Generally a higher-priority user should be easier to be allocated
with a FR channel. It is not recommended to set this parameter

to "TCHF only" or "TCHH only".
Generally the channel allocation strategy provided by the MSC is
Reason
used, which means that a TCH/H is preferentially allocated only in

the case of channel congestion.
Change take effect
No
Access
Read/Write
OMC Access path

2-752
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.88 EMLPP channel reserved rate

Full Name
EMLPP channel reserved rate
Abbreviated Name
emlppThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If high-priority users are allowed to preferentially access the system,

that is eMLPP is used, the system may reserve a certain number
of channels for CS services of high-priority users. The number of
reserved channels equals the product of the eMLPP threshold times
the minimum of the number of available channels and the number
of idle TCHF channels.
Instance
Cell
Related FG
ZGO-01-03-001 eMLPP
0..100
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher this parameter value is, the more the reserved channels
are. High-priority users are guaranteed to obtain channels, but

low-priority users have less available channels.
The lower this parameter value is, the less the reserved channel
are. High-priority users are not highly guaranteed.
2-753
SJ-20140527134815-013|2015-03-10(R1.1)
Because the reserved channels cannot be used by low-priority
Reason
users, and the congestion rate is often increased, so reserved

channels are not configured by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.89 Use cell EMLPP Threshold

Full Name
Use cell EMLPP Threshold
Abbreviated Name
useCellEmlppThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the eMLPP channel reservation

ratio (eMLPPThs) of the cell is used. If this parameter is set to "Yes",
a cell-level property is selected. If this parameter is set to "No", a
BSC-level property is selected.
Instance
Cell
Related FG
ZGO-01-03-001 eMLPP
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-754
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set "Yes" if a cell alone requires to configure the
eMLPP parameters.
A global configuration is more convenient, and is suitable for most
Reason
scenarios.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.90 Dynamic HR support indication

Full Name
Dynamic HR support indication
Abbreviated Name
DynaHREnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the BSC supports dynamic Half

Rate (HR). The dynamic HR channel allocation function enables the
network to allocate full-rate or half-rate channels to MSs according
to the traffic in the cell when it allocates channels for MSs. Allocating
half-rate channels when the channels in the cell are likely to be
congested minimizes the time of possible congestions in peak hours.
Instance
Cell
Related FG
0: Not Support
1: Support
2-755
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to 1 if the BSC requires to enable the dynamic
HR function.
It is a functional switch. The default value is 0.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.91 Threshold of AMR HR

Full Name
Threshold of AMR HR
Abbreviated Name
amrHrThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-756
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When the number of busy timeslots (occupied TCHF, occupied

TCHH/2, available PD channels, and congested PD channels)
divided by the number of total time slots (available TCHF, available
TCHH/2, and available PD channels) is greater than or equal to
AmrHRThs/100, and both the TRX and cell support AMR, AMR is
preferred to be used for the subsequent services.
Instance
Cell
Related FG
ZGO-03-02-006 Independent Threshold for Dynamic AMR HR/FR

Conversion
0..100
Unit
Default Value
50
Related Parameters
hrThs
HRThs>=AmrHRThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If more AMRHR channels are desired to be allocated in the cell, this
parameter value should be decreased, otherwise it is increased.
AMR dynamic conversion is preferred. This parameter value should
Reason
be less than the dynamic HR threshold, so it is set to 50%.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.92 Threshold for FR to HR

2-757
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Threshold for FR to HR
Abbreviated Name
hrThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the number of busy timeslots (occupied TCHF, occupied

TCHH/2, available PD channels, and congested PD channels)
divided by the number of total time slots (available TCHF, available
TCHH/2, and available PD channels) is greater than or equal to
HRThs/100, the system converts TCHF channels to TCHH channels.
The number of available HR channels is limited by HRTsPercentage.
Instance
Cell
Related FG
1..100
Unit
Default Value
60
Related Parameters
amrHrThs
HRThs>=AmrHRThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter value can be decreased if more HR channels are
required.
When up to 60% channels are occupied, the cell is considered as
Reason
busy, so dynamic HR channels are allocated to increase the cell

capacity.
Change take effect
No
Access
Read/Write
OMC Access path

2-758
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.93 Dynamic HR channel allocation algorithm

Full Name
Dynamic HR channel allocation algorithm
Abbreviated Name
DhrAlgorithm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the algorithm for the busy level of a

dynamic HR cell.
If a dynamic channel is configured in the cell and is used for PS
services, the dynamic channel is converted into a dynamic PS
channel. No matter CS services or PS services are carried, the
dynamic PS channel is considered as busy. If the busy level is
high, the BSC allocates a dynamic HR channel before preempting
the dynamic PS channel. If only CS services are carried, the BSC
preempts the dynamic PS channel first and then allocates an HR
channel when the calculated busy level is high and no enough FR
channel is available.
Instance
Cell
Related FG
0: CS and PS
1: Only CS
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-759
SJ-20140527134815-013|2015-03-10(R1.1)
If the operator wants to increase the ratio of CS users and decides
that the PS service performance can be sacrificed, this parameter is

set to "1: Only CS". Thus the BSC preempts PS channels for CS
services before allocating dynamic HR channels.
If the operator wants to guarantee both the CS service volume and
PS service performance, this parameter is set to "0: CS and PS".
Usually, the system considers that a dynamic channel is occupied
Reason
when it is used for PS services.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.94 HR channel fragment finishing support

Full Name
HR channel fragment finishing support
Abbreviated Name
hrDfragSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable the HR channel

defragmentation function. This function can be configured at both
BSC and cell levels. The HR channel defragmentation function
is enabled only when both BSC- and cell-level switches are
enabled and the proportion of the idle TCH/F channels in these
cells is no more than the threshold proportion of the idle TCH/F
channels in the total available service channels in the cell where
the defragmentation is enabled.
Instance
Cell
Related FG
2-760
SJ-20140527134815-013|2015-03-10(R1.1)
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
HRDfragSupport
HoIntraEnable
HRDfragSupport
HR channel defragmentation is available only when the
Parameters
HRDfragSupport (a BSC parameter), HoIntraEnable (a system

control parameter), and HRDfragSupport (a cell parameter)
parameters are switched on. When the ratio of idle TCH/F
channels to all available TCHs exceeds a threshold, HR channel
defragmentation starts. When the cell busy level exceeds a
threshold, HR channel defragmentation stops.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: HR channel defragmentation in
dynamic-HR-enabled cells can increase the number of FR channels,

which improves the speech quality. HR channel defragmentation
on dynamic channels can increase available PS channels. This
function is enabled based on the operator's requirement. To enable
this function, the corresponding global parameter in the BSC should
also be set. If this function is enabled, the number of handovers
increases.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-761
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.95 Busy threshold for HR defrag

Full Name
Busy threshold for HR defrag
Abbreviated Name
hrDefragBusyThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the cell busy level is less than a threshold, HR channel

defragmentation starts. This parameter indicates this threshold.
The cell busy level is the ratio of busy channels (including TCH/Hs,
TCH/Fs, and PDTCHs) to all available channels in the cell. It is
calculated when HR channel defragmentation is required due to
release of HR MSs.
Instance
Cell
Related FG
0..100
Unit
Default Value
80
Related Parameters
hrDfragSupport
Parameters

Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter indicates the busy threshold of a cell. If this
threshold is increased, HR channel defragmentation is performed

in a high busy level. The number of intra-cell handovers due to HR
channel defragmentation is increased. If this threshold is decreased,
HR channel defragmentation is performed in a low busy level. The
number of intra-cell handovers due to HR channel defragmentation
is decreased.
2-762
SJ-20140527134815-013|2015-03-10(R1.1)
Because HR channel defragmentation may make channels busy,
Reason
it is not recommended to perform it when over 80% channels are

occupied.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.96 Idle FR threshold For HR defrag

Full Name
Idle FR threshold For HR defrag
Abbreviated Name
hrDefragIdleFRThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the ratio of idle TCH/Fs to all available TCHs in the cell is
less than this threshold, HR channel defragmentation starts. It is
calculated when HR channel defragmentation is required due to
release of HR MSs.
Instance
Cell
Related FG
0..100
Unit
Default Value
20
Related Parameters
hrDfragSupport
2-763
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters

Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter defines the idle TCH/F percentage as the start
threshold for HR channel defragmentation. If this threshold is

increased, HR channel defragmentation is performed when there
are more idle TCH/Fs. The number of intra-cell handovers due
to HR channel defragmentation is increased. If this threshold is
decreased, HR channel defragmentation is performed only when
there are less idle TCH/Fs. The number of intra-cell handovers due
to HR channel defragmentation is decreased.
When there is only few idle TCH/Fs in the cell, idle TCH/Fs are
Reason
required more urgently. The default value is a low threshold.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.97 HR channel percentage threshold

Full Name
HR channel percentage threshold
Abbreviated Name
hrTsPercentage
Managed Object
2-764
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
When ratio of occupied HR timeslots to total traffic timeslots in the

cell is lower than a threshold, new HR channels can be generated in
the cell. This parameter indicates this threshold. The occupied HR
timeslots includes static HR timeslots and dynamic HR timeslots.
Instance
Cell
Related FG
ZGO-01-01-001 Half Rate
0..100
Unit
Default Value
50
Related Parameters
HRTsPercentage
UseCellDynHRPara
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To control HR channels being used, an HR timeslot percentage
is configured. The higher the parameter value is, the more HR

channels are used by the system, and the more A-interface circuits
are used. The lower the parameter value is, the less HR channels
are used by the system, and the less A-interface circuits are used.
The dynamic HR start threshold is over 50% by default to prevent
Reason
more HR channels from being used.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-765
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.98 If support allocating channel by TA

Full Name
If support allocating channel by TA
Abbreviated Name
AllocChlByTA
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether channel allocation (on BCCH TRX

or non-BCCH TRX) based on TA is supported.
Instance
Cell
Related FG
ZGO-04-03-006 Dense BCCH Frequency Reuse
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to "Support" if required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-766
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.99 The TA threshold of allocating channel in BCCH

Full Name
The TA threshold of allocating channel in BCCH
Abbreviated Name
TaThsOfBCCH
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the TA threshold when channels on the

BCCH TRX are allocated. If the TA value is lower than or equal to
this threshold, channels on the BCCH TRX are prior to be allocated.
Otherwise, channels on non-BCCH TRXs are prior to be allocated.
Instance
Cell
Related FG
ZGO-04-03-006 Dense BCCH Frequency Reuse
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter value is related to the cell coverage. For a cell in
the urban area, this parameter value is low. For a cell with large
coverage in the suburban area, this parameter value is high.
By default, only MSs close to the BTS are allocated with channels
Reason
on the BCCH TRX. Actually This parameter is adjusted according to

the cell coverage.
Change take effect
No
0
2-767
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.17.100 Support dynamic channel move

Full Name
Support dynamic channel move
Abbreviated Name
DynChMove
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A dynamic channel can be used either for speech services or

PS services. For a cell configured with static TCHs and dynamic
channels, static TCHs are prior to be used for speech services,
and dynamic channels may be used when there are more speech
services. A feature is defined to release the CS service that occupies
a dynamic PDCH channel and switches the service to a static TCH
channel. This parameter indicates whether this feature is supported.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-768
SJ-20140527134815-013|2015-03-10(R1.1)
For a cell configured with both dynamic channels and static
channels, it is recommended to enable this function. If this function

is enabled, the number of intra-cell handovers increases.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.101 Idle static TCH threshold for dynamic channel move

Full Name
Idle static TCH threshold for dynamic channel move
Abbreviated Name
IdleTCHForDChMove
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the idle static TCH percentage is higher than a threshold, CS

services occupying dynamic PDCHs can be switched to static TCHs.
Instance
Cell
Related FG
0..100
Unit
Default Value
20
Related Parameters
DynChMove
N/A
Parameters
Value Type
long
2-769
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter controls the start threshold of dynamic channel
switch. Increasing or decreasing the threshold can increase or

decrease the frequency of dynamic channel switch.
The lower the threshold is, CS services on dynamic channels are
Reason
easier to be switched to static channels.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.102 Additional reselection parameter indication(SI4)

Full Name
Additional reselection parameter indication(SI4)
Abbreviated Name
additionReselPI
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
As defined in the GSM specification, the cell selection and

reselection depends on the C1 and C2 criterions. Whether C2
is used for cell reselection is determined by the operator. The
AdditionReselPI (Additional Reselect Param Ind, ACS) parameter is
used for notifying the MS that whether C2 is used for cell reselection.
As one of the cell selection parameters, this parameter is
broadcasted to all the MSs in a cell through the messages RIL3_RR
SYSTEM INFORMATION TYPE3 and TYPE4. The options are
described as follows:
2-770
SJ-20140527134815-013|2015-03-10(R1.1)
0: If rest octets of SYSTEM INFORMATION TYPE4 (SI4 Rest

Octets) exists, the MS obtains the PI parameter related to cell
reselection and other parameters related to C2 calculation from
the SI4 Rest Octets.
1: The MS selects the PI parameter related to cell reselection and
other parameters related to calculating C2 from the SI7/8 Rest
Octets.
Generally system information type7 and type 8 are seldom used, so
this parameter is set to 0. If system information type7 and type8 are
used and C2 is used for cell reselection, this parameter is set to 1.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally system information type7 and type8 are seldom used, so
this parameter is set to 0.
Because system information type7 and type8 are seldom used and
Reason
the actual cell reselection strategy should be as simple as possible,

C2 is not used generally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-771
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.103 Cell reselection parameter indication

Full Name
Cell reselection parameter indication
Abbreviated Name
cellReselPI
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether C2 is used for cell reselection and

whether C2 parameters are contained in the system information.
If this parameter is set to 0, the parameters ReselOff, TempOffset,
and PenalTime are invalid, and C1 is used for cell reselection.
broadcasted to all the MSs in a cell through the messages RIL3_RR
SYSTEM INFORMATION TYPE3 and TYPE4.The options are
0: C1 is used for cell reselection. The parameters CellBarQualify,
ReselOffset, TemporaryOffset, and PenaltyTime are invalid.
1: The MS obtains parameters from system information to calculate
the C2 value, and reselect a cell based on the C2 value. The
parameters CellBarQualify, ReselOffset, TemporaryOffset, and
PenaltyTime are valid.
If a cell uses C2 as the cell reselection criterion, this parameter must
be set to 1, otherwise, this parameter is set to 0.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
CellBarQualify
ReselOffset
TemporaryOffset
PenaltyTime
The parameters CellBarQualify, ReselOffset, TemporaryOffset, and
Parameters
PenaltyTime are valid only after this parameter is set to 1.
Value Type
long
Parameter Type
Negotiation With CN
No
2-772
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
In a dense urban or urban dual-band (for example, 900M/1800M)
network, it is recommended to enable C2 for 1800M cells to balance

traffic load. For a 900M cell, this parameter is set according to the
actual traffic load and network configuration. For a cell in which CBA
or CBQ is enabled, this parameter must be set to 1.
To simplify the on-site cell reselection strategy, the C2 algorithm is
Reason
not used by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.104 Cell reselection offset

Full Name
Cell reselection offset
Abbreviated Name
reselOffset
Managed Object

3GPP Name
CELL_RESELECT_OFFSET
3GPP Reference
N/A
Description
As a cell reselection criterion due to poor radio channel quality, C2

is created based on C1 and some offset parameters. The offset
parameters can encourage the MS to preferentially select a specified
cell or prevent the MS from selecting a specified cell. Usually, the
offset parameters are set for load balancing in the network.
Besides C1, there are three factors that affect C2: cell reselection
offset (ReselOffset), temporary offset (TemporaryOffset), and
penalty time (PenaltyTime).
The ReselOffset (Cell Reselect Offset, CRO) parameter is an offset,
which is a manual correction value for C2. ReselOffset can be
used to encourage the MS to preferentially select a specified cell or
2-773
SJ-20140527134815-013|2015-03-10(R1.1)
prevent the MS from selecting a specified cell so that traffic load is

balanced in the network.
broadcasted to all the MSs in a cell through the RIL3_RR SYSTEM
INFORMATION TYPE3 and TYPE4 messages. This parameter is
valid only when the CellReselPI parameter is set to 1.
The ReselOffset, TemporaryOffset, and PenaltyTime parameters
are set in the following three cases:
For a cell with heavy traffic load or the signal quality is poor due to
some reasons, the MS should not select it as much as possible
(rejection from the cell).
In this case, PenaltyTime is set to 31, which means that the
TemporaryOffset is invalid, and that C2 = C1 - Reseloffset. The C2
value of this cell is decreased, and the MS is unlikely to select this
cell. In addition, ReselOffset can be set according to the rejection
extent of the cell. The higher the rejection extent is, the higher the
ReselOffset value is. Otherwise, the lower the ReselOffset value is.
For a cell with low traffic load and the device usage is low, the MS is
encouraged to select it (preference to the cell).
In this case, ReselOffset is set to 0-10 (0-20 dB). According to the
preference extent to this cell, the higher the preference extent is, the
higher the ReselOffset value is. Otherwise, the lower the ReselOffset
value is. It is generally recommended to set TemporaryOffset to be
equal to or a little higher than ReselOffset. PenaltyTime can prevent
frequent cell reselection. It is generally set to 1 (20 s) or 2 (40 s).
For a cell with moderate traffic load, ReselOffset is generally set to
0, and PenaltyTime is set to 31. When PenaltyTime is set to 31, C2
= C1, and no additional offsets are considered.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-774
SJ-20140527134815-013|2015-03-10(R1.1)
In a dense urban or urban dual-band (for example, 900M/1800M)
network, it is recommended to set CRO to 4-8 for 1800M cells. In

a suburban dual-band (for example, 900M/1800M) network, it is
recommended to set CRO to 0-5 for 1800M cells. It is recommended
to set the CRO, TO, and PT parameters as follows:
1. For a cell with heavy traffic load or the signal quality is poor due
to some reasons, the MS should not select it as much as possible
(rejection from the cell).
In this case, PenaltyTime is set to 31, which means that the
TemporaryOffset is invalid, and that C2 = C1 - Reseloffset. The C2
value of this cell is decreased, and the MS is unlikely to select this
cell. In addition, ReselOffset can be set according to the rejection
extent of the cell. The higher the rejection extent is, the higher the
ReselOffset value is. Otherwise, the lower the ReselOffset value is.
2. For a cell with low traffic load and the device usage is low, the MS
is encouraged to select it (preference to the cell).
In this case, ReselOffset is set to 0-10 (0-20 dB). According to the
preference extent to this cell, the higher the preference extent is, the
higher the ReselOffset value is. Otherwise, the lower the ReselOffset
value is. It is generally recommended to set TemporaryOffset to be
equal to or a little higher than ReselOffset. PenaltyTime can prevent
frequent cell reselection. It is generally set to 1 (20 s) or 2 (40 s).
If CRO is too high, the MS may select a cell with low downlink signal
level, and the test coverage is reduced.
If CRO is set to a reasonable value, a cell can absorb or reject traffic
load to decrease the SDCCH/TCH congestion ratio and increase the
call establishment success rate.
Reason
not used by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-775
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.105 Temporary offset

Full Name
Temporary offset
Abbreviated Name
temporaryOffset
Managed Object

3GPP Name
TEMPORARY_OFFSET
3GPP Reference
N/A
Description
As a cell reselection criterion due to poor radio channel quality, C2

is created based on C1 and some offset parameters. The offset
parameters can encourage the MS to preferentially select a specified
cell or prevent the MS from selecting a specified cell. Usually, the
offset parameters are set for load balancing in the network.
penalty time (PenaltyTime). Temporary Offset indicates the
temporary correction value for C2. Temporary means that it only
acts on C2 within the period depending on Penalty time.
INFORMATION TYPE3 and TYPE4 messages. Whether this
parameter is valid is determined by the CellReselPI parameter.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to set this parameter to 1. It means that a suitable
offset is set in a certain penalty time to prevent frequent reselection.
2-776
SJ-20140527134815-013|2015-03-10(R1.1)
A suitable offset should be set in a certain penalty time.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.106 Penalty time

Full Name
Penalty time
Abbreviated Name
penaltyTime
Managed Object

3GPP Name
PENALTY_TIME
3GPP Reference
N/A
Description
The C2 parameter acts as a criterion for cell reselection caused by

poor radio channel quality. C2 is created based on C1 and some
offset parameters. The offset parameter is used to encourage MSs
to preferentially select the specified cells or prevent the MSs from
selecting a specified cell. Usually, the offset parameter is set for
load balancing in the network.
penalty time (PenaltyTime). Temporary Offset indicates the
temporary correction value for C2. Temporary means that it only
acts on C2 within a period depending on Penalty time.
INFORMATION TYPE3 and TYPE4 messages. The validity of this
parameter is determined by the CellReselPI parameter.
Instance
Cell
Related FG

2-777
SJ-20140527134815-013|2015-03-10(R1.1)
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The recommended value is 0, indicating 20 s. When this parameter
is set to 31, it indicates that CRO is a negative value and is used in

special cases for traffic balancing.
Reason
disabled by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.107 Cell reselecting hysteresis level

Full Name
Cell reselecting hysteresis level
Abbreviated Name
reselHysteresis
Managed Object

3GPP Name
CELL_RESELECT_HYSTERESIS
3GPP Reference
N/A
2-778
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When an MS reselects a cell, if the source cell and the target cell
are in different location areas, the MS initiates a Location Update
(LU) procedure after reselection.
The C2 values measured on the boundary of two neighbor cells are
different due to the fading characteristic of radio channel, resulting
in frequent reselection between cells. The time interval of two cell
reselections is no less than 15 s, but still too short for location
update of the MS.
Therefore, the signaling traffic in the network dramatically increases,
radio resources cannot be fully utilized and the call success rate
decreases because the MS cannot respond to paging during the
location update.
To reduce the effect on system performance, a cell reselection
hysteresis parameter is defined in GSM specifications. This
parameter specifies that the signal level of the neighbor cell (different
from the serving cell) must be higher than that of the serving cell,
and the difference between the signal value of the serving cell and
neighbor cell must be higher than a specified value. In this case,
the MS initiates cell reselection.
This parameter broadcasts information to all MSs in a cell through
the RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4
messages, and is one of the cell reselection parameters.
The recommended value is to 4 or 5 (indicating that the CRH level
is 8 dB or 10 dB). This parameter can be adjusted in the following
cases:
When there is a large traffic in some areas, and traffic overload
occurs frequently, it is recommended to increase this parameter
value in the neighbor cells with different LACs.
If the neighbor cells in different location areas have large overlapped
coverage, it is recommended to increase this parameter value.
If the neighbor cells with different LACs have poor coverage in
overlapped areas, which means that there is a coverage gap or the
neighbor cell is located in an area with few slowly moving objects
such as the expressway, the recommended value is 1 through 3
(indicating that the CRH level is 2dB through 6dB).
Instance
Cell
Related FG
0..7
Unit
2dB
Default Value
Related Parameters
N/A
2-779
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For reselection between cells with different LACs, it is recommended
to set this parameter to a high value, to reduce excessive location

update due to frequent reselection. A high parameter value can
reduce the number of reselection times in ready state and improve
the reselection rate.
Therefore, by increasing the value of this parameter (CRH), you
can reduce the number of location update times, decrease the SD
channel congestion rate and improve the call success rate.
This parameter is set for avoiding frequent reselection between cells
Reason
with different LACs.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.108 new establishment causes indication

Full Name
new establishment causes indication
Abbreviated Name
neci
Managed Object

3GPP Name
NECI
3GPP Reference
N/A
2-780
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Based on GSM specifications, the service channels in the GSM

system can be divided in to full-rate channels and half-rate channels.
The GSM system supports full-rate channels. Whether the network
supports half-rate services is determined by the network operator.
This parameter (NECI) informs the MS whether half-rate services
are supported (half rate services are not affected if this parameter is
disabled) in this area, and affects the definition of the cause value
for a channel request and the selection of an initial channel type.
This parameter is sent to the MS through the RIL3_RR SYSTEM
INFORMATION TYPE3 and TYPE4 messages, and is one of the
network functional parameters.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If any half-rate implementation is required, you can set this
parameter to Yes.
This parameter is disabled because there is no half-rate service
Reason
on site by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-781
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.109 Power offset indication

Full Name
Power offset indication
Abbreviated Name
powerOffsetInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
For the GSM 1800 Class 3 MSs, the transmitting power for
sending access request messages on the RACH is specified by
MsTxPwrMaxCCH plus an offset value. Whether to use an offset
is determined by PwrOffsetInd.
INFORMATION TYPE3, TYPE4, TYPE7 and TYPE8 messages.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
As GSM 1800 Class 3 MSs are rarely used, it is recommended to
keep the default value, which can be modified only if there is any
special requirement.
As the GSM 1800 Class 3 MSs are rarely used, this parameter is
Reason
set to 0 by default, indicating that the power offset is not required.
Change take effect
No
Access
Read/Write
2-782
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.17.110 Power offset

Full Name
Power offset
Abbreviated Name
powerOffset
Managed Object

3GPP Name
POWER OFFSET
3GPP Reference
N/A
Description
For the GSM 1800 Class 3 MSs, the transmitting power for
sending access request messages on the RACH is specified by
MsTxPwrMaxCCH plus an offset value. This parameter indicates the
value of this power offset. The PwrOffsetInd parameter determines
whether this parameter is valid.
This parameter also affects the cell reselection criteria C1 and C2.
INFORMATION TYPE3, TYPE4, TYPE7 and TYPE8 messages.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-783
SJ-20140527134815-013|2015-03-10(R1.1)
As GSM 1800 Class 3 MSs are rarely used, it is recommended to
keep the default value. If there is any special requirement, you can
modify it as needed.
As the GSM 1800 Class 3 MSs are rarely used, this parameter is
Reason
set to 0 by default, indicating that the power offset is not required.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.111 Priority threshold

Full Name
Priority threshold
Abbreviated Name
prio_Thr
Managed Object

3GPP Name
PRIO_THR
3GPP Reference
N/A
Description
This parameter is broadcasted to the MS through the SI4,

SI6, and SI7 messages. This parameter is related to the
RXLEV_ACCESS_MIN parameter, and used for calculating the C4
criterion.
Instance
Cell
Related FG
ZGO-02-02-012 Network Controlled Cell Reselection
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-784
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
and C32 criteria. It is not recommended to use the default value.
Reason
and C32 criteria. It is not recommended to use the default value.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.112 LSA Offset

Full Name
LSA Offset
Abbreviated Name
lsa_Offset
Managed Object

3GPP Name
LSA_OFFSET
3GPP Reference
N/A
Description
This parameter is broadcasted to the MS through the SI4, SI6, and

SI7 messages. It is used for notifying the MS of an offset value for
LSA (Localized Service Area) reselection between two cells with the
same LSA priority. For LSA_OFFSET, refer to TS 45.008.
Instance
Cell
Related FG
N/A
0..7
Unit
N/A
2-785
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The LSA service is not supported in this version, so it is not needed
to adjust this parameter.
The LSA service is not supported in this version.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.113 Additional reselection parameter indicator(SI3)

Full Name
Additional reselection parameter indicator(SI3)
Abbreviated Name
addResPI2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-786
SJ-20140527134815-013|2015-03-10(R1.1)
Description
As defined in the GSM specification, the cell selection and

reselection depend on the C1 and C2 criteria. Whether C2 is used
for cell reselection is determined by the operator.
The AdditionReselPI (Additional Reselect Param Ind, ACS)
parameter is used for notifying the MS that whether C2 is used for
cell reselection.
This parameter is broadcasted to all MSs in a cell through the
RIL3_RR SYSTEM INFORMATION TYPE4 message, and is one
of cell reselection parameters.
Options for this parameter is as follows:
0: If rest octets of SYSTEM INFORMATION TYPE4 (SI4 Rest
Octets) exists, the MS obtains the PI parameter for cell reselection
and other parameters for C2 calculation from the SI4 Rest Octets.
Yes: The MS selects the PI parameter for cell reselection and other
parameters for calculating C2 from the SI7/8 Rest Octets.
SI7/8 is rarely used. This parameter must be set to No; otherwise,
some cell phones (such as NEC) cannot access the network.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, SI7/8 is rarely used. Therefore, this parameter must
be set to No; otherwise, some cell phones (such as NEC) cannot

access the network.
SI7/8 is rarely used. This parameter must be set to No; otherwise,
Reason
some cell phones (such as NEC) cannot access the network.
Change take effect
No
2-787
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read
OMC Access path

N/A
2.17.114 MAX value of MS Radio link timeout

Full Name
MAX value of MS Radio link timeout
Abbreviated Name
msRadioLkTmOut
Managed Object

3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
Description
This parameter indicates the maximum value of the radio link counter
S at the MS side, and is sent on the BCCH or SACCH by the BSS.
The radio link counter S is used for determining radio link failure.
This counter is decremented by one when the MS cannot decode
the SACCH message (BFI=1), and incremented by two when the
MS successfully receives an SACCH message (BFI=0). If the
counter S value is decremented to 0, it means a radio link failure,
and the call should be re-established or released.
Instance
Cell
Related FG
ZGB-06-01-001 Monitoring Um Interface
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
2-788
SJ-20140527134815-013|2015-03-10(R1.1)
14: 60
15: 64
Unit
SACCH mf
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is related to the call drop rate. The higher the
parameter value is, the lower the call drop rate will be. To decrease
the call drop rate, you can set this parameter to a high value, but it
may affect user perception and resource utilization.
The default value uses the maximum value of this parameter
Reason
to increase the bit error tolerance for the radio link of the MS in
communications.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.115 Radio link failure criterion

Full Name
Radio link failure criterion
Abbreviated Name
conFailCriterion
Managed Object

3GPP Name
Connection Failure Criterion

2-789
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
The BTS determines a radio link failure based on two criteria: the
uplink SACCH error rate and the RXLEV/RXQUAL measurement
value. This parameter specifies the criterion for the BTS to
determine connection failure.
If an uplink SACCH error rate is used for the BTS to determine
connection failure, the BTS uses the same value of the
RadioLkTimeout parameter and the calculation process as the MS,
to avoid inconsistent criterion in the uplink and downlink. Meanwhile,
the Receiving Level Threshold (RxLevThs) and Receiving Quality
Threshold (RxQualThs) are invalid.
If an RXLEV/RXQUAL-based measurement value is used for
determining a connection failure, the BTS uses the two parameters:
Receiving Level Threshold (RxLevThs) and Receiving Quality
Threshold (RxQualThs).
Options for this parameter is as follows:
1: based on an uplink SACCH error rate (to keep a consistent
measurement in uplink and downlink)
2: based on an RXLEV/RXQUAL measurement value
Instance
Cell
Related FG
1: Uplink SACCH Error Rate Based

2: RXLEV/RXQUAL Measurement Based
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set to the default value.
The default value is set based on the same criterion as applied to
Reason
the MS.
Change take effect
No
0
2-790
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.17.116 MAX value of BSS Radio link timeout

Full Name
MAX value of BSS Radio link timeout
Abbreviated Name
bsRadioLkTmOut
Managed Object

3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
Description
This parameter indicates the maximum value of the radio link

counter S at the BSS side, and is used in the same way as
MsRadioLKTmOut.
Instance
Cell
Related FG
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
SACCH mf
2-791
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is set to increase the bit error tolerance for the
Reason
radio link of the MS in communications.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.117 Receiving level threshold

Full Name
Receiving level threshold
Abbreviated Name
rxLevThs
Managed Object

3GPP Name
RXLEV
3GPP Reference
N/A
2-792
SJ-20140527134815-013|2015-03-10(R1.1)
Description
The BTS can judge a radio link failure based on two criteria: the
value.
If an RXLEV/RXQUAL measurement value is used to judge a
connection failure (the ConFailCriterion parameter is set to 2), the
radio link is considered as failed when the BTS detects one of the
following conditions: the uplink receiving level is lower than a certain
threshold, or the uplink receiving quality is higher than a certain
threshold. This parameter indicates the receiving level threshold.
If an uplink SACCH error rate is used to judge a connection failure
(the ConFailCriterion parameter is set to 1), this parameter is invalid.
This parameter is one of the BTS configuration parameters.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
10
Related Parameters
ConFailCriterion
This parameter takes effect when the ConFailCriterion parameter is
Parameters
set to an RXLEV/RXQUAL measurement value.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is valid when the conFailCriterion parameter is set
to 2. To reduce the call drop rate, you can decrease the receiving
level threshold.
The default value is set according to empirical values in common
Reason
radio conditions.
Change take effect
No
Access
Read/Write
OMC Access path

2-793
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.118 Receiving quality threshold

Full Name
Receiving quality threshold
Abbreviated Name
rxQualThs
Managed Object

3GPP Name
RXQUAL
3GPP Reference
N/A
Description
The BTS can judge a radio link failure based on two criteria: the
value.
If an RXLEV/RXQUAL measurement value is used to judge a
connection failure (the ConFailCriterion parameter is set to 2), the
radio link is considered as failed if the BTS detects one of the
following conditions: the uplink receiving level is smaller than a
certain threshold, or the uplink receiving quality is greater than a
certain threshold. This parameter indicates the receiving quality
threshold.
If an uplink SACCH error rate is used to judge a connection failure
(the ConFailCriterion parameter is set to 1), this parameter is invalid.
This parameter is one of the BTS configuration parameters.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
ConFailCriterion
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-794
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is valid when the conFailCriterion parameter is set
to 2. The receiving quality threshold should not be set too low. The
default value is 6. To reduce the call drop rate, you can set this
parameter to 7.
Reason
radio conditions.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.119 Radio link failure checking period

Full Name
Radio link failure checking period
Abbreviated Name
rxLevQualPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the period to detect radio link failure at the
network side (in the unit of SACCH multiframe), including channel
strength (dBm) and signal quality received on each channel. If an
uplink SACCH error rate is used to judge a connection failure (the
ConFailCriterion parameter is set to 1), this parameter is invalid.
Instance
Cell
Related FG
1..63
Unit
SACCH mf
Default Value
63
Related Parameters
ConFailCriterion
2-795
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.120 BCCH switch allowed

Full Name
BCCH switch allowed
Abbreviated Name
CanBcchExch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BCCH switchover is allowed

in this cell. When both the global and BCCH switches are enabled,
services on a faulty BCCH TRX can be switched over to the other
TRXs, and the cell is restored to a normal status.
Instance
Cell
2-796
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
CanBCCHEx
The BCCH switchover takes effect when both the BSC- and
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is enabled when the BCCH switchover in a cell is
required. After the BCCH switchover function is enabled, services

on a faulty BCCH TRX can be switched over to the other TRXs, to
prevent the cell from being out of service.
Reason
(Off)".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.121 Dynamic configuration SDCCH

Full Name
Dynamic configuration SDCCH
Abbreviated Name
CanSdcchDyn
Managed Object

2-797
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the SDCCH dynamic configuration

is allowed in this cell. After the SDCCH conversion function is
enabled, the BSC initiates an SDCCH dynamic channel conversion
when the location update increases in this cell, to decrease the
SDCCH channel congestions.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
CanSDCCHDyn
This parameter takes effect when both the BSC- and cell-level
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is enabled when the SDCCH conversion in a cell
is required. After the SDCCH conversion function is enabled, the

BSC initiates an SDCCH dynamic channel conversion when the
location update increases in this cell, to decrease the SDCCH
channel congestions.
Reason
(Off)".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-798
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.122 Baseband frequency hopping TRX exchange support

Full Name
Baseband frequency hopping TRX exchange support
Abbreviated Name
SupBBHopExChange
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to support automatic baseband

frequency-hopping switchover. This function is supported only
when both the BSC- and cell-level switches are enabled. When a
TRX in a baseband frequency-hopping group is faulty, the system
automatically moves it out of the group, and moves it back into the
group when it is recovered from the failure.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
BHTESupp
The baseband frequency-hopping function is supported in a cell
Parameters
when both the BSC- and cell-level switches are enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is recommended to enable this parameter in the cell configured
with baseband frequency-hopping, to prevent services in the

baseband frequency-hopping group from being affected by the
faulty TRX.
It is a functional switch. The default parameter value is set because
Reason
no baseband hopping frequency is available by default.
Change take effect
No
2-799
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.17.123 Idle TS's PA Power off

Full Name
Idle TS's PA Power off
Abbreviated Name
StartPAPowerOff
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The BTS not only turns off the PA power in the idle slots, but also
turns off the PA bias voltage for the purpose of power saving. After
this parameter is configured in the BTS, the FPGA determines
whether to turn off the PA bias voltage according to the parameter
configurations.
Instance
Cell
Related FG
ZGO-04-04-003 Intelligent Timeslot Shutdown
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Enabling this parameter can achieve power saving and cost
reducing.
2-800
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
(Off)".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.124 Switch flag of cell TRX power off

Full Name
Switch flag of cell TRX power off
Abbreviated Name
StartTRXPowerOff
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BTS powers off some

transceivers when the traffic is decreased to a certain point for
power saving.
Instance
Cell
Related FG
ZGO-04-04-002 Load Dependent Intelligent TRX Shutdown
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-801
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
Yes
This parameter indicates whether the BTS powers off some
transceivers when the traffic is decreased to a certain point for

power saving.
Reason
(Off)".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.125 Start PA output voltage tuning

Full Name
Start PA output voltage tuning
Abbreviated Name
StartPAOutVolTuning
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BTS adjusts the PA power

supply voltage in accordance with the PA output power.
Instance
Cell
Related FG
ZGO-04-04-005 PA Voltage Adjustment
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
2-802
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
After this parameter is enabled, the BTS can adjust the PA power
supply voltage in accordance with the PA output power.
Reason
(Off)".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.126 Enable RRU of cell power off

Full Name
Enable RRU of cell power off
Abbreviated Name
RRUPOWEROFF
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RRU power-off function is

supported in a cell. When the RRU power-off is enabled, some
TRXs are powered off for power saving and cost reducing when the
traffic decreases in the cell (for example in midnight).
Instance
Cell
Related FG
2-803
SJ-20140527134815-013|2015-03-10(R1.1)
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the RRU power-off is required in a cell, you can configure this
parameter to On. After this parameter is enabled, some RRUs are

powered off during idle periods for power saving, and powered on
when the traffic increases.
Reason
(Off)".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.127 The switch of CIR report

Full Name
The switch of CIR report
Abbreviated Name
ReportCIR
Managed Object

3GPP Name
N/A
2-804
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates whether CIR (C/I value) is included in a

measurement report. The CIR information can be obtained from "C/I
measurement" and "carrier frequency measurement".
Instance
Cell
Related FG
N/A
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is disabled by default. It is enabled when the CIR
analysis is required.
This parameter is disabled by default because the CIR report,
Reason
which is not required generally, can increase the traffic over the
Abis interface.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.128 The L2 frame of Lapdm fill random value

Full Name
The L2 frame of Lapdm fill random value

2-805
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
LapdmL2Cfg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the Lapdm L2 frame is filled with a

random value.
The Lapdm L2 frame used to be filled with a fixed value (00101011),
through which a call can be easily decrypted and listened by other
persons.
If the LAPDm L2 frame is filled with a random value, which is difficult
to be decrypted, the call conversation security can be ensured.
Instance
Cell
Related FG
ZGO-06-02-002 Random Fill Bits
0: no, meaning that only fixed value 0x2B can be filled

1: yes, meaning that random values can be filled
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is recommended to set this parameter to On in the case of
encryption to prevent the conversation from being listened illegally.
This parameter is set to Off because encryption is disabled and the
Reason
filling bit is not required.
Change take effect
No
Access
Read/Write
OMC Access path

2-806
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.129 MR Report Time Bmp

Full Name
MR Report Time Bmp
Abbreviated Name
mrRptTimeBmp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter provides options for 24 time points (0-23) in a day,

and controls whether to enable the measurement data report at
each time point.0-23 indicates zero o'clock through 23 o'clock.
The MR data are reported when the corresponding time point is
selected, meaning that, this parameter is enabled at the time point.
Instance
Cell
Related FG
0..16777215
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[24]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the actual MR collecting time as
required.
Reason
(Off)".
Change take effect
No
2-807
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.17.130 Support intelligent cell shutting down

Full Name
Support intelligent cell shutting down
Abbreviated Name
CellShuttingDown
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a cell supports intelligent cell

shutdown.
In a dual-band network, if a 1800M cell is covered by a 900M cell
and the 1800M cell supports intelligent cell shutdown, the BSC
starts shutting TRXs down when detecting that the traffic in the
1800M cell meets the shutdown conditions within an allowed period.
The BCCH TRX is the last TRX to be shut down before no traffic
exists in this cell.
Instance
Cell
Related FG
ZGO-04-04-007 Intelligent Cell Shutdown
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
StartTRXPowerOff
To enable intelligent cell shutdown, you should enable intelligent
Parameters
TRX shutdown first.
Value Type
long
Parameter Type
2-808
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
Yes
Based on the operator's requirements, this parameter can be
enabled when the 1800M cell in a dual-band network is covered by

the other cell (such as 900M cell).
It is a feature-related switch. The default parameter value is set to
Reason
"0 (Not Support)".
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.17.131 Upper GGsmCell DN

Full Name
Upper GGsmCell DN
Abbreviated Name
refGGsmCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of the upper cell that covers the
local cell (1800M cell). If the upper 900M cell is referenced when
the intelligent cell shutdown function is enabled, the local cell shuts
down or starts up the BCCH TRX in accordance with the traffic in
the 900M cell.
Instance
Cell
Related FG
ZGO-04-04-007 Intelligent Cell Shutdown
N/A
Unit
N/A
Default Value
N/A
2-809
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
CellShuttingDown
When CellShuttingDown=1, then this parameter need to config.
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
If the intelligent cell shutdown function is disabled, it is not needed
to configure an upper cell.

If the intelligent cell shutdown function is enabled, you need to
configure an upper cell in accordance with data planning.
The intelligent cell shutdown function is disabled by default;
Reason
therefore the upper cell is not required.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.17.132 Mobile Originated Short Message Intercept

Full Name
Mobile Originated Short Message Intercept
Abbreviated Name
MOSmsIntercept
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether to intercept MO messages. If

interception is performed, the MS fails to send messages.
Instance
Cell
2-810
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is disabled by default. It is only enabled based on
the operator's requirements.
This function is rarely used. It can only be used based on the
Reason
operator's requirements.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.133 Mobile Terminated Short Message Intercept

Full Name
Mobile Terminated Short Message Intercept
Abbreviated Name
MTSmsIntercept
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-811
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies whether to intercept MT messages. If

interception is performed, the MS fails to receive messages.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is disabled by default. It is only enabled based on
the operator's requirements.
This function is rarely used. It can only be used based on the
Reason
operator's requirements.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.17.134 Diversity Combine Mode

Full Name
Diversity Combine Mode
Abbreviated Name
DivCombMode
Managed Object
2-812
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates diversity combine mode. IRC mode,

which remedies the weakness of MRC mode, can eliminate
interference signals when combining the expected signals. EIRC
mode has better effect on interference elimination than IRC mode
in co-channel interference-limited scenarios, but worse than IRC
mode in noise-limited scenarios.
Instance
Cell
Related FG
ZGO-04-01-005 Interference Rejection Combining (IRC)

ZGO-04-01-009 Enhanced IRC
0: MRC
1: IRC
2: EIRC
3: EIRCII
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
IRC mode, which remedies the weakness of MRC mode, can
eliminate interference signals when combining the expected signals.

EIRC mode has better effect on interference elimination than IRC
mode in co-channel interference-limited scenarios, but worse than
IRC mode in noise-limited scenarios.
This parameter is set to 1 by default, meaning that, IRC mode
is selected because it is applicable to various scenarios. It is
recommended to use IRC mode when the application scenario has
unknown interferences.
If the application scenarios have co-channel interferences, you can
set this parameter to EIRC.
This parameter is applicable to many scenarios. It is recommended
Reason
to use IRC mode when the application scenario has unknown

interferences.
2-813
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.17.135 Joint Source-Controlled Channel Decoding Switch

Full Name
Joint Source-Controlled Channel Decoding Switch
Abbreviated Name
JSCCDSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The purpose of joint source-channel decoding is to improve the

uplink voice quality and user experience for voice services when the
channel condition is bad.
Instance
Cell
Related FG
ZGO-04-02-022 Um Interface Error Voice Frame Correction
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-814
SJ-20140527134815-013|2015-03-10(R1.1)
The joint source-channel decoding feature improves the decoding
performance, voice quality, and the user experience for voice

services. The joint source-channel decoding requires more DSP
resources for computing and supports less traffic. When the channel
condition is good, the effect of joint source-channel decoding is not
obvious.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.136 Joint Source-Controlled Channel Decoding

Full Name
Joint Source-Controlled Channel Decoding
Abbreviated Name
JSCCD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the algorithm used for joint source-channel

decoding.
Instance
Cell
Related FG
ZGO-04-02-022 Um Interface Error Voice Frame Correction
1: Inter Frame
2: Inter-Intra Frame
Unit
N/A
Default Value
Related Parameters
JSCCDSwitch
2-815
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter takes effect only when JSCCDSwitch is enabled.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The computational load of the intra-frame prediction algorithm is
lower but the achieved gain is also lower. The inter-intra frame
prediction algorithm combines inter-frame and intra-frame prediction
has a heavy computational load but achieves a higher gain.
A higher gain can be achieved when the inter-frame and intra-frame
Reason
algorithm is used for joint source-channel decoding.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.137 IBS time bitmap

Full Name
IBS time bitmap
Abbreviated Name
DownPowerBmp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-816
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is a control variable that specifies a time bitmap

to control intelligent TRX shutdown. BITs 1 to 23 correspond to
0 to 23 o'clock respectively. If the value of a BIT is 1, intelligent
TRX shutdown is allowed at the corresponding clock. If the value
of the BIT is 0, intelligent TRX shutdown is not allowed at the
corresponding clock.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[24]
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The default value is recommended. This parameter can be adjusted
to enable intelligent TRX shutdown in idle periods in accordance

with the traffic statistics.
The intelligent TRX shutdown feature is disabled by default. Each
Reason
BIT in the bitmap is set to 0, indicating that this feature is disabled.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-817
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.138 Cell shuttingdown based on traffic load

Full Name
Cell shuttingdown based on traffic load
Abbreviated Name
PwDownLoadInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the load is considered before

TRX shutdown. If this parameter is set to "Yes", the corresponding
TRX can be shut down only when the cell load is lower than the limit
specified by the parameter downlimit. When the cell load becomes
higher than the limit specified by the parameter UpLimit, the TRX
must be powered on.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to "No" (0) if it is unnecessary to consider the
cell load when using the shutdown function. This parameter is set to
"Yes" (1) if the load-based shutdown function is required.
The load-based shutdown function is enabled by default.
Reason
Change take effect
No
2-818
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.139 Support implicit reject in assignment

Full Name
Support implicit reject in assignment
Abbreviated Name
SuppImplicitReject
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the immediate assignment

message contains the implicit reject indication field. This field
determines whether an MS supporting implicit rejection needs to
initiate an implicit rejection procedure when initiating an access
request.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to 1 when the implicit rejection indication is
required in immediate assignment message. Or else, this parameter

is set to 0.
2-819
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.140 Implicit reject CS and PS

Full Name
Implicit reject CS and PS
Abbreviated Name
ImpltRejCsAndPs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the implicit reject indication field in the

immediate assignment message for implicitly rejecting MSs with
low access priority.
Instance
Cell
Related FG
0: Not implicit reject CS and PS

1: Implicit reject PS
2: Implicit reject CS
3: Implicit reject CS and PS
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-820
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the requirement for
implicit rejection of low-priority CS and PS services.
This default value is set according to the importance of services and
Reason
the principle of rejecting low-priority services in case of congestion.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.141 Support broadcasting EAB

Full Name
Support broadcasting EAB
Abbreviated Name
SuppBroadcastEAB
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the EAB is broadcast through

SI 21.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
2-821
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to 1 when the EAB needs to be broadcast
through SI 21. Or else, this parameter is set to 0.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.142 EAB Subcategory

Full Name
EAB Subcategory
Abbreviated Name
EABSubcategory
Managed Object

3GPP Name
EAB Subcategory
3GPP Reference
44.018
Description
The broadcast message containing the EAB information can be

configured to be applicable to MSs in a specific network scope. In
this way, the number of MSs supporting the EAB function, which
are influenced by the broadcast message, can be controlled.
This parameter indicates the network scope in which the EAB
authorization mask is applicable to the MSs supporting the EAB
function.
2-822
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. No modification is needed
unless specially required. This parameter can be adjusted to an

appropriate value when a network scope is specially planned for
MSs supporting the EAB function. The smaller the parameter value
is, the larger the network scope of the MSs supporting the EAB
function is.
This default value indicates that the EAB authorization mask is
Reason
applicable to all MSs supporting the EAB function in the network.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.143 EAB Authorization Mask

Full Name
EAB Authorization Mask
Abbreviated Name
EABAuthorizeMask
Managed Object

2-823
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
EAB Authorization Mask
3GPP Reference
44.018
Description
This parameter indicates the categories of EAB-supported MSs that

are rejected at different flow control levels.
Instance
Cell
Related FG
0..1023
Unit
N/A
Default Value
[0,1,3,7,15,31,63,127,255,511,1023,1023,1023]
Related Parameters
N/A
N/A
Parameters
Value Type
long[13]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the planned value for the
network, including the categories of EAB-supported MSs rejected in

case of no flow control and flow control at different levels
No EAB-supported MS is rejected when flow control is disabled. The
Reason
lower the flow control level is, the fewer categories of EAB-supported
MSs are rejected. The higher the flow control level is, the more
categories of EAB-supported MSs are rejected.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-824
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.144 EAB Position

Full Name
EAB Position
Abbreviated Name
EABPosition
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The system information can be broadcast on the BCCH Norm or

BCCH Ext. This parameter indicates the position of the broadcast SI
21 that contains the EAB information.
Instance
Cell
Related FG
0: Normal
1: Extend
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. No modification is needed
unless specially required. This parameter can be adjusted according

to the planned value for the network.
By default, SI 21 is broadcast on the BCCH Norm.
Reason
Change take effect
No
Access
Read/Write
2-825
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.145 NCC Config Parameter

Full Name
NCC Config Parameter
Abbreviated Name
NccCfgPara
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The neighbor cell coordination feature allows the serving cell to

use free RU resources and BP resources, and idle optical ports of
a neighbor cell. In addition, it supports four receiving channels in
uplink by combining the antennas in the neighbor cell, and allows
the neighbor cell to receive uplink signals of MSs in the serving cell.
This feature improves the uplink performance.
Instance
Cell
Related FG
ZGO-04-01-012 Neighbour Cell Cooperation(NCC)
0: Nonsupport NCC
1: Support NCC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-826
SJ-20140527134815-013|2015-03-10(R1.1)
The neighbor cell coordination feature can be enabled when the
serving cell and a neighbor cell belongs to the same BTS. This
feature allows the serving cell and the neighbor cell to receive and
process signals from an MS at the same time, optimizing the call
quality.
The neighbor cell coordination feature is only available in
Reason
SDRV4.11.13.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.146 RxQual Threshlod

Full Name
RxQual Threshlod
Abbreviated Name
RQThreshold
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink RQ threshold that determines

whether to enable the neighbor cell coordination. When the uplink
RQ is lower than this threshold, the neighbor cell coordination is
enabled.
Instance
Cell
Related FG
ZGO-04-01-012 Neighbour Cell Cooperation(NCC)
2-827
SJ-20140527134815-013|2015-03-10(R1.1)
0: bit error rate under 0.2%

1: bit error rate between 0.2%~0.4%
7: bit error rate over 12.8%
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter cannot exceed the RQ threshold for handover.
When the RQ reported by an MS is higher than this threshold

(RQThreshold), the neighbor cell coordination feature is enabled.
The neighbor cell coordination feature is only available in
Reason
SDRV4.11.13.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.147 TCH Allocation Threshold For Dual-Frequency Network

Full Name
TCH Allocation Threshold For Dual-Frequency Network
Abbreviated Name
DualFreqNetTchThs
2-828
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the enhanced dual-frequency network feature is enabled

(DualFreqHoSup=1), a directed retry to the associated cell is
initiated when the TCH occupancy exceeds a certain threshold
during service establishment. This parameter indicates the TCH
occupancy threshold that determines a directed retry.
Instance
Cell
Related FG
ZGO-04-02-024 Related Dual-Band Network
0..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be adjusted to a smaller value if strong
interference exists in the current cell, to allow the directed retry to

the associated cell in the dual-frequency network.
Directed retry to the associated cell in a dual-frequency network is
Reason
allowed only when the traffic in the current cell reaches a certain
threshold.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-829
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
UmSynSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the cell participates in the

collection of clock offset during soft synchronization of air interface
clock.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
Gumsyn.UmSynSupport
The cell-level switch is turned on when Gumsyn.UmSynSupport
Parameters
is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
When the soft synchronization feature is enabled, this parameter is
set to "Support" if the cell is expected to participate in clock offset

collection. Or else, this parameter is set to "Not Support".
This feature is disabled unless specially required.
Reason
Change take effect
No
Access
Read/Write
2-830
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.149 Is Enhanced Dual-Frequency Network Support

Full Name
Is Enhanced Dual-Frequency Network Support
Abbreviated Name
IsDualFreqSup
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the cell supports the enhanced

dual-frequency network feature.
If the coverage of the cell is overlapped by the coverage of a cell
using a different frequency and the loads in these two cells are
imbalanced, these two cells can be set as associated cells of a
dual-frequency network. The enhanced dual-frequency network
feature can be enabled for load balancing.
If the coverage of a cell does not overlap with that of another cell,
or load balancing between two overlapped cells is not required, the
enhanced dual-frequency network feature is disabled.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-831
SJ-20140527134815-013|2015-03-10(R1.1)
The enhanced dual-frequency network feature can be enabled if
associated cells are configured for the dual-frequency network.
This feature is disabled by default because a call establishment
Reason
procedure is prolonged when this feature is enabled, and load

balancing is only required in the dual-frequency coverage with high
traffic.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.150 SubCell Channel Allocation Control

Full Name
SubCell Channel Allocation Control
Abbreviated Name
CSAllocSC
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used to control channel allocation in a Co-BCCH

cell. It determines channel allocation in which subcell is preferred
during assignment.
If the load in subcell 1 is higher, subcell 2 is preferred during
assignment. If the load in subcell 2 is higher, subcell 1 is preferred
during assignment.
Instance
Cell
Related FG
0: SubCell2 as preferred channel allocation subCell

1: SubCell1 as preferred channel allocation subCell
Unit
N/A
2-832
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
UseLoadBalance
The parameter UseLoadBalance must be set to 1 when the
Parameters
parameter CSAllocSC is set to 1 (subcell 1 is preferred for channel

allocation).
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be configured to set subcell 1 as the preferred
subcell for channel allocation if it is expected to assign MSs to

subcell 1.
Subcell 2 is preferred to carry traffic.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.151 Use Uniform Power Control

Full Name
Use Uniform Power Control
Abbreviated Name
UseUniformPwrCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-833
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is a switch that enables or disables the unified power

control algorithm for GSM base stations. When the switch is turned
on, a complete power control solution is available for GSM V3 BTSs,
including B8108, B8112, and M8202.This solution can implement all
previous power control algorithms supported by V3 base stations
through different parameter configurations.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is recommended to turn on this switch when a base station
needs to adjust the power control algorithm by different parameter

combinations to adapt to different radio link conditions. The unified
power control algorithm is supported in V3 BTS V6.20.240q and
later versions.
The unified power control algorithm is disabled by default to ensure
Reason
compatibility with the base station version.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-834
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.152 Longitude
Full Name
Longitude
Abbreviated Name
Longitude
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates longitude.
Instance
BSC
Related FG
N/A
-180.00000..180.00000
Unit
N/A
Default Value
180
Related Parameters
N/A
N/A
Parameters
Value Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-835
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.153 Latitude
Full Name
Latitude
Abbreviated Name
Latitude
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates latitude.
Instance
BSC
Related FG
N/A
-90.00000..90.00000
Unit
N/A
Default Value
90
Related Parameters
N/A
N/A
Parameters
Value Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-836
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.154 Altitude
Full Name
Altitude
Abbreviated Name
altitude
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the antenna altitude.
Instance
Cell
Related FG
N/A
N/A
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To be planned on customer site.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-837
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.155 Offset Angle

Full Name
Offset Angle
Abbreviated Name
offsetAngle
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the antenna azimuth.
Instance
Cell
Related FG
N/A
N/A
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-838
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.156 Site location

Full Name
Site location
Abbreviated Name
address
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the site address.
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-839
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.157 Immediate assignment occupy PCH option

Full Name
Immediate assignment occupy PCH option
Abbreviated Name
PCHOccupyOpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the switch is on, the immediate assignment messages of the

BTS do not preempt the PCH block if they can be all sent on the
AGCH block at the next 51 multiframe.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function, if enabled, can decrease the preemption of the
immediate assignment messages over the paging messages, but

it delays sending of the immediate assignment messages at the
same time.
The switch is off by default, consistent with that of the earlier
Reason
versions.
Change take effect
No
Access
Read/Write
2-840
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.158 Immediate assignment maximum delay times

Full Name
Immediate assignment maximum delay times
Abbreviated Name
IAMAXDelayTimes
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum delay times of immediate

assignment. Immediate assignment message will be send
immediately if the delay times is greater than this parameter.
Instance
Cell
Related FG
N/A
0..9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater the value is, the more times the immediate assignment
messages can be sent with a delay and the less times the immediate
assignment messages can preempt the paging messages.
The maximum delay times is 3.
Reason
Change take effect
2-841
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.159 Arf power reduce function switch

Full Name
Arf power reduce function switch
Abbreviated Name
SupportArfPwrReduce
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In the frequency hopping mode, when signals of the GSM frequency

interfere with neighbor UMTS and LTE frequencies, this function
can be enabled to decrease the interference.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-842
SJ-20140527134815-013|2015-03-10(R1.1)
At a GU dual-mode site, when the frequency hopping function is
enabled for the GSM system and if the GSM and UMTS share a
frequency and mode, usually the UMTS takes the middle frequency
while the GSM takes the frequencies on both sides. When the
UMTS system takes the 3.8 or 4.2 bandwidth, the downlink
performance deteriorates much due to the interference of the GSM
neighbor frequency over the UMTS. This function can be enabled to
decrease the interference.
The switch is off by default to avoid affecting the GSM performance.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.160 Prom power step

Full Name
Prom power step
Abbreviated Name
AVGPromPower
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This pamameter indicates the power to be increased for other

frequencies to keep the Um power consistent.
Instance
Cell
Related FG
N/A
0..2
Unit
0.5db
Default Value
2-843
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The power raised should be equal to the power compressed.
This affects GSM little.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.161 Stop power Reduce Level Threshold

Full Name
Stop power Reduce Level Threshold
Abbreviated Name
StopPwrReduceThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Power compression is not implemented or compensated if the actual

value is lower than this parameter.
Instance
Cell
Related FG
N/A
0..15
2-844
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
0.5db
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This value is to be adjusted in light of the difference between the
UMTS power and GSM carrier power to meet the condition that the
GSM transmit power is 3db lower than the UMTS power.
The downlink Tx signal is lowered by 3db from the configured Tx
Reason
power, for the sake of less impact on neighbor frequency.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.162 Reduce Power Arfcn

Full Name
Reduce Power Arfcn
Abbreviated Name
PowerReduceARFCN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a frequency point on the left and right sides
of a UMTS or LTE working frequency point.
2-845
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
N/A
0..1023,65535
Unit
N/A
Default Value
[65535,65535]
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the GSM and UMTS share a frequency and mode, usually
the UMTS takes the middle frequency while the GSM takes the
frequencies on both sides.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.163 Reduce Power Step

Full Name
Reduce Power Step
Abbreviated Name
ReducePower
Managed Object

3GPP Name
N/A
2-846
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the power compression step of specific

frequency points.
Instance
Cell
Related FG
N/A
0..12
Unit
0.5db
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The power raised should be equal to the power compressed.
The interference on UMTS is reduced and the impact on GSM is
Reason
little.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.164 Assign strategy for Cobcch

Full Name
Assign strategy for Cobcch
Abbreviated Name
SubCellAssign
Managed Object

2-847
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
When the COBCCH function is enabled in the field, there are usually
few channels on the first subcell. In this case, the system tries
to make users borne on the second subcell and assigns users to
the second subcell when the pass loss or TA meets requirements.
However, the signals measured on the SDCCH channel of the first
subcell are local signals. Sometimes, it is inaccurate to use the
measurement result to calculate path loss and determine whether
to assign users to the second subcell. As a result, the assignment
success rate is low. To solve this problem, assignment only in
the first subcell is supported. To use this assignment mode, the
channels in the first subcell must be sufficient and the customer
requires to improve the assignment success rate. After the
assignment is complete, the users that meet the requirements of the
second subcell are switched to the second subcell through intra-cell
handover. This parameter determines the assignment mode used.
Instance
Cell
Related FG
0: According to Radio Measure

1: Only Subcell1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is usually set as "By wireless measurements". It
may also be set as "Only assign to the first subcell" when the first
subcell has sufficient channels and the assignment success rate is
very important.
In most cases, qualified MSs should better be assigned to the
Reason
second subcell, to avoid congestion in the first subcell.
Change take effect
2-848
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.165 SupportBtsBcchExchg
Full Name
SupportBtsBcchExchg
Abbreviated Name
SupportBtsBcchExchg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch used for maximum protection of TRXs.

It determines whether a BTS is allowed to select the target BCCH
TRX.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
CanBcchExch
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-849
SJ-20140527134815-013|2015-03-10(R1.1)
The BSC must be configured to turn on this switch when the
maximum protection of TRXs is required for BTSs.
By default, this function is not required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.166 Dynamic Priority NCell Traffic Threshold

Full Name
Dynamic Priority NCell Traffic Threshold
Abbreviated Name
DynPrioNCellTrafThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the load on an adjacent cell is greater than this threshold, the

dynamic priority of the adjacent cell is calculated. Otherwise, the
dynamic priority of the adjacent cell is equal to its static priority.
Instance
Cell
Related FG
0..100
Unit
N/A
Default Value
Related Parameters
hoControlPrioChg,NonEmergHoDynPrio,
EmergHoDynPrio
DynPrioNCellTrafThs cannot be determined until the cell-level
Parameters
dynamic priority function is enabled.
2-850
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This threshold value can be raised if a neighbor cell with some
traffic can't serve as a candidate neighbor cell due to the adjustment

of dynamic priority.
By default, the dynamic priority of an adjacent cell is calculated
Reason
when the load on the cell is equal to or greater than 0 during

dynamic priority adjustment.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.167 Non Emergency Handover use Dynamic Priority

Full Name
Non Emergency Handover use Dynamic Priority
Abbreviated Name
NonEmergHoDynPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the cell parameter "hoControlPrioChg" is enabled, this

parameter determines whether to calculate the dynamic priority of a
neighbor cell in the case of a non-emergency handover.
Instance
Cell
Related FG
0: No
1: Yes
2-851
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
hoControlPrioChg,
DynPrioNCellTrafThs
Status of this switch can be determined only after hoControlPrioChg
Parameters
is enabled. At the same time, DynPrioNCellTrafThs cannot be

determined until the cell-level dynamic priority adjustment function
is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled if necessary.
By default, the dynamic priority adjustment of non-emergency
Reason
handover is disabled.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.168 Emergency Handover use Dynamic Priority

Full Name
Emergency Handover use Dynamic Priority
Abbreviated Name
EmergHoDynPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-852
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When the cell parameter "hoControlPrioChg" is enabled, this

parameter determines whether to calculate the dynamic priority of a
neighbor cell in the case of an emergency handover.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
hoControlPrioChg,
DynPrioNCellTrafThs

Parameters
Status of this switch can be determined only after hoControlPrioChg

is enabled. At the same time, DynPrioNCellTrafThs cannot be
determined until the cell-level dynamic priority adjustment function
is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
By default, the dynamic priority adjustment of emergency handover
Reason
is disabled.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.17.169 Filter Exceed Traffic threshold NCell

2-853
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Filter Exceed Traffic threshold NCell
Abbreviated Name
FiltExcdThsNCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In the case of non-emergency handover, "FiltExcdThsCell" is

supported to determine whether to filter the neighbor cells whose
traffic load exceeds the threshold.The switch does not depend on
the dynamic priority switch.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In the case of non-emergency handover, the neighbor cells whose
Reason
traffic load exceeds the threshold are not filtered by default.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-854
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.170 Support SDCCH handover before A5/1 ciphering

Full Name
Support SDCCH handover before A5/1 ciphering
Abbreviated Name
SdcchHoforA51
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an SDCCH handover is triggered

before A5/1 encryption.
Instance
Cell
Related FG
ZGO-06-02-005 Enhanced A5/1
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Based on the onsite requirement, this feature is enabled if enhanced
A5/1 encryption is required.
It depends on the license. By default, this feature is disabled.
Reason
Change take effect
No
2-855
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.171 Support modify NCell ARFCNS after A5/1 ciphering

Full Name
Support modify NCell ARFCNS after A5/1 ciphering
Abbreviated Name
NcellModifyforA51
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the neighbor cell list is modified

after the A5/1 encryption algorithm is successfully executed.
Instance
Cell
Related FG
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
2-856
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.172 Support Sys Info 6 fill bits random after A5/1 ciphering
Full Name
Support Sys Info 6 fill bits random after A5/1 ciphering
Abbreviated Name
SysInfo6Enhance
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether system information 6, sent to the

MSs who use A5/1, supports random filling bits instead of fixed bits.
Instance
Cell
Related FG
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-857
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.173 Dynamic configuration CCCH

Full Name
Dynamic configuration CCCH
Abbreviated Name
DynMCCCHSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter controls whether the dynamic MCCCH function is

enabled. When the system paging load is strongly fluctuated, this
function is enabled. With other related parameters set, the paging
channel quantity on the BCCH carrier can be dynamically adjusted
based on actual paging load.
Instance
Cell
Related FG
ZGO-03-02-016 Dynamic Multiple CCCHs
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
2-858
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
This function is enabled in the cases that paging load is strongly
fluctuated.
This function is valid only for some specific models.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.174 PCH threshold For CCCH Expand

Full Name
PCH threshold For CCCH Expand
Abbreviated Name
DynMccchHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-859
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the paging load threshold over which the
CCCH channel capacity should be increased. Paging load = the
number of paging blocks in the buffer / the maximum number of
paging blocks available on the current paging channels
The default value is obtained in specific cases, and is only for
reference. This parameter should be adjusted according to actual
paging message loss. If many paging messages are lost with
this parameter set to the default value, the threshold should be
decreased accordingly.
Instance
Cell
Related FG
1..100
Unit
N/A
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
This parameter can be properly increased based on the onsite
situation.
This parameter is set based on the paging statistics of other live
Reason
sites.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-860
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.175 PCH threshold For CCCH Restore

Full Name
PCH threshold For CCCH Restore
Abbreviated Name
DynMccchLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the paging load threshold below which the
CCCH channel capacity should be decreased.
Instance
Cell
Related FG
1..100
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
This parameter can be properly decreased or keep the default value
based on the onsite situation.
This parameter is set based on the paging statistics of other live
Reason
sites.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-861
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.176 Hysteresis For CCCH Expand

Full Name
Hysteresis For CCCH Expand
Abbreviated Name
DynMccchHighHys
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When paging load is higher than DynMccchHighThs and the

duration is longer than a threshold, the CCCH capacity is increased.
This parameter indicates the threshold.
Instance
Cell
Related FG
6..255
Unit
Default Value
12
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
This parameter can be adjusted based on the duration of high
paging load but should not be too small.
CCCH capacity increase or decrease due to paging load fluctuation
Reason
should not be too frequent.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
2-862
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.17.177 Hysteresis For CCCH Restore

Full Name
Hysteresis For CCCH Restore
Abbreviated Name
DynMccchLowHys
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When paging load is lower than DynMccchLowThs and the duration

is longer than a threshold, the CCCH capacity is decreased. This
parameter indicates the threshold.
Instance
Cell
Related FG
30..255
Unit
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
This parameter can be adjusted based on the duration of low paging
load but should not be too small.
CCCH capacity increase or decrease due to paging load fluctuation
Reason
should not be too frequent.
Change take effect
No
Access
Read/Write
2-863
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.178 Maximum Timeslot Number For CCCH Expand

Full Name
Maximum Timeslot Number For CCCH Expand
Abbreviated Name
MaxDynCCCHTsNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of TSs that can be

converted to the CCCH.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
This parameter is set based on actual paging load, but should not
be too large to affect TCH resource.
This parameter is set to 0 by default.
Reason
Change take effect
No
0
2-864
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.179 Minimum Tch reserved for dynamic MCCCH

Full Name
Minimum Tch reserved for dynamic MCCCH
Abbreviated Name
MinTchForDynMCCCH
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum number of free TCHs

reserved in a cell when the CCCH capacity is increased.
Instance
Cell
Related FG
1..64
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Generally, no modification is required.
A certain number of free TCHs must be reserved.
Reason
Change take effect
2-865
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.180 EMI Control

Full Name
EMI Control
Abbreviated Name
EMIControl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates how to process compatibility between the

EMI and BTS.
Instance
Cell
Related FG
0..2
0: BTS Not report EMI information,BSC Not calculate EMI value
1: BTS report old format speech quality,BSC calculate EMI value
2: BTS report new format speech quality,BSC calculate EMI value
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
2-866
SJ-20140527134815-013|2015-03-10(R1.1)
The EMI report mode is set based on the BTS version.
If the EMI processing is different from the BTS interface, this
Reason
parameter is set to comply with the BTS version.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.181 EFR Support

Full Name
EFR Support
Abbreviated Name
EFRSUPPORT
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the EFR speech code is

supported. If this parameter is set to 1, EFR is supported. If this
parameter is set to any other value, EFR is not supported.
Instance
Cell
Related FG
ZGO-01-01-002 Enhanced Full Rate (EFR) Speech Codec
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-867
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
Generally EFR should be supported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.182 Support EMLPP

Full Name
Support EMLPP
Abbreviated Name
SUPPORTEMLPP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the eMLPP function is

supported in a cell, including queuing, forced handover, forced
release, and channel reservation. If this parameter is set to 1, the
eMLPP function is enabled. If this parameter is set to any other
value, the eMLPP function is disabled.
Instance
Cell
Related FG
ZGO-01-03-001 eMLPP
2-868
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
GBssEmlpp.supportEmlpp
When both this parameter and the GBssEmlpp.supportEmlpp
Parameters
parameter are enabled, the eMLPP function is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is enabled in most cases. If the queuing, forced
release, forced handover and channel reservation functions are not

expected to take effect, this function can be disabled.
The default value is set because the queuing function is frequently
Reason
used. This function is enabled by default to avoid that the queuing

function does not take effect.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.183 Gps Frame Offset

Full Name
Gps Frame Offset
Abbreviated Name
GpsFrameOffset
Managed Object

3GPP Name
N/A
2-869
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
The BTS calculates a frame number from the GPS time during GPS
synchronization. The frame number is used for synchronization
in various cells, so it must have an offset due to time delay. This
parameter indicates an offset of the GPS frame number.
Instance
Cell
Related FG
ZGO-04-03-007 Intelligent Frequency Timeslot Allocation(IFTA)
0..42431
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
The neighbor cells are configured with the various offsets so that the
MS can identify the BSIC of the neighbor cell.
The default value is set to 0, which means no offset. In most cases,
Reason
you need to plan an offset for a GPS frame number.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.184 Delay of TS forcible release

Full Name
Delay of TS forcible release
2-870
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
TsRel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a delay before a service procedure forcibly

releases a TS. During SDCCH to TCH conversion, the BSC is
notified to hand over the service in the TS to another TS. If the
handover fails when the delay timer expires, the BSC forcibly
releases the service in the TS.
Instance
Cell
Related FG
5..200
Unit
100ms
Default Value
100
Related Parameters
N/A
This parameter is valid only when the CanSDCCHDyn switch is
Parameters
enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, a service in a TS can be successfully handed over to
Reason
another TS in 10 seconds. The TS is forcibly released when a

period of 10 seconds expires.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-871
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.185 Paging repeat number

Full Name
Paging repeat number
Abbreviated Name
PagRep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the number of times that a paging message

is retransmitted. 0: no retransmission. 1-4: indicates the number of
times that a paging message is retransmitted.
Instance
BSC
Related FG
0..4
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set to a larger value, paging messages are more
likely to reach MSs, which improves the paging success rate, but
at the same time, increases the load of the paging channel. This
parameter should be set based on the load of the paging channel
and the paging success rate.
Retransmission increases the success rate of receiving paging
Reason
message. The retransmission interval is related to the number of

paging multiframes configured in the network. If both the number of
paging multiframes and the number of times that a paging message
is retransmitted are set to larger values, the MS may receive the
retransmitted paging message after it has successfully responded
to the first paging message and completed the call. This leads to
another network access due to the response to the paging message,
2-872
SJ-20140527134815-013|2015-03-10(R1.1)
which should not happen. The default value is set to 1 to avoid this
situation and meet the configurations of most networks.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.186 Force FACCH

Full Name
Force FACCH
Abbreviated Name
FacchOnly
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the TCH/F service channel

is preferred when a channel is requested during an immediate
assignment procedure. If this parameter is set to "1 (allowed)", the
settings of the cell parameters FacchCallInd_0, FacchCallInd_1,
FacchCallInd_2, and FacchCallInd_3 are not used by the system
any more. Instead, the TCH/F channel is used.
Instance
BSC
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
2-873
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
facchCallEmgCall
facchCallPagResp
facchCallMo
facchCallCallReEst
If this parameter is set to "1 (allowed)", the settings of the cell
Parameters
parameters FacchCallInd_0, FacchCallInd_1, FacchCallInd_2, and

FacchCallInd_3 are not used by the system any more. Instead, the
TCH/F channel is used.
If this parameter is set to "0 (not allowed)", the system determines
whether the TCH/F channel is preferred based on the settings of the
cell parameters FacchCallInd_0, FacchCallInd_1, FacchCallInd_2,
and FacchCallInd_3.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is not recommended to modify this value. To control the FACCH,
the settings of the cell parameters FacchCallInd_0, FacchCallInd_1,

FacchCallInd_2, and FacchCallInd_3 are used.
By default, the cell-level function is enabled. This parameter is not
Reason
forcibly preferred.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.187 TCH->SDCCH limit

Full Name
TCH->SDCCH limit
Abbreviated Name
MinSdcch
Managed Object
2-874
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold that triggers a

TCH-to-SDCCH conversion when the dynamic SDCCH
configuration function is enabled. A TCH-to-SDCCH conversion is
performed only when the number of idle SDCCHs is lower than the
threshold specified by this parameter.
Instance
Cell
Related FG
2..64
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set to a larger value, more TCH-to-SDCCH

conversions are triggered. If this parameter is set to a smaller value,
less TCH-to-SDCCH conversions are triggered.
The default value is set to "4". When the number of idle SDCCH
Reason
channels is less than 4, the dynamic SDCCH conversion is initiated.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-875
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.188 Immediate assignment priority

Full Name
Immediate assignment priority
Abbreviated Name
ImmAssPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
It is recommended to cancel this parameter. The function of this

parameter is the same as that of the cell parameter "Immediate
assignment occupy PCH option."
This parameter indicates the priority of immediate assignment
messages. The value can be set to 0 or 1. The value 1 means that
immediate assignment messages can preempt any PCH block. This
parameter is not used in this version. Its value is set to 1.
Instance
BSC
Related FG
N/A
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
The default value is set to 1.
Reason
Change take effect
No
Access
Read/Write
2-876
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.189 FACCH Enhance

Full Name
FACCH Enhance
Abbreviated Name
FacchEnhance
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to enhance

the FACCH.
Instance
Cell
Related FG
N/A
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can shorten 1-2 seconds of the call setup time with
very small FACCH delay. Therefore the utilization of this parameter

is high. If the system resource is sufficient, you can enable this
parameter to improve the call setup time delay of some calls in the
serving cell. It is recommended to apply this function in drive tests.
2-877
SJ-20140527134815-013|2015-03-10(R1.1)
It is a functional switch. By default, it is disabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.190 the TCH load threshold of FACCH enhance

Full Name
the TCH load threshold of FACCH enhance
Abbreviated Name
FacchEnhanceThr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a load threshold for enhancing the FACCH.

After the FACCH enhancement switch is enabled, when the cell load
(load of subcell 1 if has subcells) is less than or equal to the value of
this threshold, services can be carried on the FACCH.
The formula for calculating the load: number of busy CS
channels*100 / (number of busy CS channels + number of idle CS
channels)
Instance
Cell
Related FG
N/A
0..100
Unit
N/A
Default Value
80
Related Parameters
N/A
N/A
Parameters
2-878
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to use the default value. If the threshold is too
low, the radio resource cannot be fully used. If the threshold is too
high, other subscribers may be affected.
When the load value is close to the default value, services can be
Reason
carried on the FACCH, which accelerates the cell establishment

process without wasting radio resources.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.191 MOS optimizing in handover procedure

Full Name
MOS optimizing in handover procedure
Abbreviated Name
MosOptInHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to improve

the MOS value during handovers. It is mainly applied in the on-site
testing.
Instance
Cell
Related FG
N/A
2-879
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is enabled based on the actual situation.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.192 max detection period

Full Name
max detection period
Abbreviated Name
MosOptDetTime
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-880
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When the BTS delivers a non-critical voice frame, a handover

command is delivered also to reduce the interference to the voice
frame. After the BTS receives the handover command, it detects
the time for delivering it. To avoid endless detection, a threshold is
needed. This parameter indicates the maximum detection period for
delivering the handover command. The BTS delivers the handover
command immediately if the detection time exceeds this threshold.
Instance
Cell
Related FG
N/A
1..150
Unit
10ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is adjusted based on the actual situation. If it is too
high, the call drop may occur. If it is too low, the handover command
may not be delivered in a proper time.
The default value is an empirical value. It indicates the period for
Reason
initialing the handover after the subscriber signal deteriorates,

which is the best time for delivering the non-critical voice frame.
Meanwhile, you need to ensure that the threshold is proper for the
MS handover without any call drop.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-881
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.193 PLVA support

Full Name
PLVA support
Abbreviated Name
IsPLVASupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the radio block decoding supports

the PLVA function. 0: the parameter is disabled, 1: the parameter
is enabled. When the radio block fails to decode for the first time,
PLVA is enabled to perform the decoding again. By using this
function, you can improve the FER and MOS performances.
Instance
Cell
Related FG
N/A
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
AttributeModeInd
Parameters
takes effect.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To improve the MOS performance within the load range, you can
enable this parameter.
This parameter is disabled by default because the BP load will be
Reason
increased if it is enabled. To improve the MOS performance within

the load range, you can enable this parameter.
Change take effect
No
2-882
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.194 Switch of TCH Trx maximum protection

Full Name
Switch of TCH Trx maximum protection
Abbreviated Name
TCHTrxMaxPrtSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to enable

the TCH TRX maximum protection. After this switch is enabled,
when some of TCH TRXs fail, the number of TCH TRX in the
affected cell can be protected maximally.
Instance
Cell
Related FG
ZGO-04-04-001 TCH Migration to BCCH TRX
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
GBssFunction.CanBcchExch
GGsmCell.CanBcchExch
When GBssFunction.CanBcchExch=1 and GGsmCell.CanBc-
Parameters
chExch=1, TCHTrxMaxPrtSw can be set to 1.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is recommended to enable this parameter because the affected
cell can be protected maximally.
2-883
SJ-20140527134815-013|2015-03-10(R1.1)
It is a functional switch. The default parameter value is set to "0 ".
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.195 Calculate PS load when Trx Power off

Full Name
Calculate PS load when Trx Power off
Abbreviated Name
PsPwDwLoadInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to calculate PS load when TRXs

are powered off. When the PS services are expected not to be
affected too much during intelligent TRX power off, you can enable
this parameter.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-884
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is enabled based on user's requirements. To save power, you can
disable it. To ensure the packet user rate, you can enable it.
In most idle scenarios, saving power is very important. Enabling this
Reason
parameter can decrease the power-saving effect.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.196 PS load limit for trx power off

Full Name
PS load limit for trx power off
Abbreviated Name
PsPwDwLoadLimit
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a PS load threshold for TRX power off.

For the intelligent TRX power off, if the cell PS load exceeds this
threshold, those TRXs are not powered off, or some TRXs that have
little effects on the PS radio resources are powered off.
Instance
Cell
Related FG
0..70
Unit
N/A
Default Value
30
2-885
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter is set to a low value, the PS user rate can be
ensured but it costs much power.
Only when the PS load is very low, TRXs are powered off.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.197 PS Load limit for urgency trx power on

Full Name
PS Load limit for urgency trx power on
Abbreviated Name
PsPowerOverLmt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the PS load threshold in a cell. When

the cell PS load exceeds this threshold, emergency TRX power
on is triggered to increase the available radio resource for packet
services.
Instance
Cell
2-886
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
N/A
70..95
Unit
N/A
Default Value
90
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The lower the value of this parameter is, the PS resources are
easier to be expanded. But a too low value may cause frequent

emergency TRX power on.
When the PS load is high, emergency TRX power on is triggered.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.198 The Number of UE Signalling Trace Data Collection

Configuration Index Related to Cell
Full Name
The Number of UE Signalling Trace Data Collection Configuration

Index Related to Cell
Abbreviated Name
refGSignalTraceCfg
Managed Object

2-887
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the configuration index of UE signaling

trace data collection related to a cell.
Instance
Cell
Related FG
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
string[20]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured when the cell is involved in the UE
signaling trace data collection.
It is a functional parameter. By default, the cell is not involved in the
Reason
UE signaling trace data collection, so it is disabled.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.17.199 MIN signal level threshold of MS uplink RACH access

Full Name
MIN signal level threshold of MS uplink RACH access
Abbreviated Name
rachAccessMin
2-888
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum uplink access threshold on

the RACH. Upon receiving a channel request, the BTS measures
the receiving level. If the receiving level is lower than this threshold,
this request is discarded.
Instance
Cell
Related FG
N/A
90..125
Unit
N/A
Default Value
125
Related Parameters
AttributeModeInd
Parameters
takes effect.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is not recommended to modify this parameter unless required.
If this value is increased, the effective cell coverage, paging

success rate, and handover success rate are decreased, and user
experience is affected, but the access performance is improved and
the call drop ratio is decreased.
No default value. This value should be in the sensitivity range.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-889
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.200 Cell load Threshold of TRX license increase

Full Name
Cell load Threshold of TRX license increase
Abbreviated Name
CellLoadHigh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the load of a cell exceeds this threshold, this cell is deemed as a

heavy-load cell and more TRX licenses are required.
Instance
Cell
Related FG
N/A
1..94
Unit
Default Value
60
Related Parameters
PowerOverLmt
PsPowerOverLmt
CellLoadHigh < PowerOverLmt
Parameters
CellLoadHigh < PsPowerOverLmt
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, the load of a cell is deemed as heavy when the cell load
Reason
exceeds 60%. In this case, more TRX licenses are required.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
2-890
SJ-20140527134815-013|2015-03-10(R1.1)
ADD
2.17.201 Threshold of the Cell expected load

Full Name
Threshold of the Cell expected load
Abbreviated Name
CellLoadExpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the load of a cell is lower than this threshold during TRX license
adjustment, this cell can release part TRX licenses to other busy
cells.
Instance
Cell
Related FG
N/A
1..90
Unit
Default Value
40
Related Parameters
CellLoadHigh
CellLoadExpt CellLoadHigh
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A larger threshold can be set if more cells are expected to release
licenses.
Generally, 40% is an appropriate proportion of the cell load.
Reason
Change take effect
No
Access
Read/Write
2-891
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.202/V6.30.202
ADD
2.17.202 The method of intelligent TRX poweroff

Full Name
The method of intelligent TRX poweroff
Abbreviated Name
powerCond
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the criteria for selecting a TRX to be

powered off when the intelligent TRX shutdown feature is enabled.
Instance
Cell
Related FG
0: The Traffic of each line

1: The peak of busy channel ratio
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Traffic refers to average traffic time. The power-off of TRXs
affects the channel resources of a cell. However, the traffic per

channel cannot reflect the change of the channel resources. The
peak channel occupancy reflects the channel resources of a cell.
However, repeated power-on and power-off of TRXs must be
avoided.
2-892
SJ-20140527134815-013|2015-03-10(R1.1)
Generally, the average traffic per channel is used to determine
Reason
whether a TRX needs to be powered off.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.17.203 IBS shutdown limit

Full Name
IBS shutdown limit
Abbreviated Name
powerDownLimit
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of the traffic per channel for
TRX power-off. If the average traffic per channel in a cell is lower
than this threshold, a TRX of the cell must be powered off and the
cell is added to the power-off cell list.
Instance
Cell
Related FG
0..70
Unit
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-893
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
The default value is recommended. If the parameter is set to a small
value, less TRXs can meet the power-off condition, the impact on the
traffic is small, but the energy saving effect is bad. If the parameter
is set to a large value, more TRXs can be powered off, the impact
on the traffic is great, but the energy-saving effect is good.
The default value is set to 30. If the traffic in a cell is lower than 30%,
Reason
the cell is considered to be idle and some TRXs can be powered off.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.17.204 IBS powerup limit

Full Name
IBS powerup limit
Abbreviated Name
powerUpLimit
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of the traffic per channel for
TRX power-on. If the average traffic per channel in a cell is higher
than this threshold, a TRX of this cell must be powered on and the
cell is added to the power-on cell list.
Instance
Cell
Related FG
0..90
Unit
%
2-894
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
60
Related Parameters
DownLimit
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. This parameter can be modified
slightly according to the actual traffic.

If the parameter is set to a large value, less TRXs can meet the
power-on condition, the cell load may increase, but the energy
saving effect is good.
If the parameter is set to a small value, the impact on the cell load is
small, but the energy-saving effect is bad.
The default value is set to 60. If the traffic in a cell reaches 60%, the
Reason
cell is considered to be busy and more TRXs must be powered on.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.17.205 IBS powerover limit

Full Name
IBS powerover limit
Abbreviated Name
powerOverLmt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-895
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the load threshold for emergency TRX

power-on. During channel request or handover decision making, if
the load of a cell or a sub-cell exceeds this threshold, the cell or
sub-cell is notified to power on its TRX.
Instance
Cell
Related FG
70..95
Unit
Default Value
90
Related Parameters
UpLimit
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. This parameter can be modified
slightly according to the actual traffic.

If the parameter is set to a large value, less TRXs can meet the
urgent power-on condition, the cell load may increase, but the
energy saving effect is good.
If the parameter is set to a small value, more TRXs can meet the
urgent power-on condition, the impact on the cell load is small, but
the energy-saving effect is bad.
The default value is set to 90. If the traffic in a cell reaches 90%, the
Reason
cell is considered to be very busy and TRXs must be powered on

immediately to avoid congestion.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2-896
SJ-20140527134815-013|2015-03-10(R1.1)
2.17.206 IBS power priority

Full Name
IBS power priority
Abbreviated Name
powerPriority
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the criteria for determining the TRX

power-off or power-on sequence during intelligent TRX shutdown.
The sequence can be determined according to the TRX priority,
interference band, or the weighted sum of TRX priority and
interference band. Different weights are configured for the TRX
priority and the interference band. The system calculates the
weighted sum for each TRX according to the formula (TRX priority
weight A + interference band weight B), and then sorts the
TRXs according to the calculated results and the operating mode
and type of the TRU.
Instance
Cell
Related FG
1: Carrier priority>interference band

2: interference band>carrier priority
3: only as per interference band
4: only as per carrier priority
Unit
N/A
Default Value
Related Parameters
IftaMaId
If GBssIfta.IFTASupport is set to 1 and IftaMaId is not 0,
Parameters
PowerPriority can only be set to 4.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set according to the operational conditions in the
network. If the carrier priorities are properly set, this parameter can
be set to 1. Otherwise, this parameter can be set to 2. If only one
priority is used for intelligent power-on and power-off, this parameter
can be set to 3 or 4.
2-897
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is set because the carrier priority is considered to
Reason
be higher than the interference band priority. In addition, the carrier

priority can be adjusted in the network management system.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.17.207 BCCH forbidden TS merger time bitmap

Full Name
BCCH forbidden TS merger time bitmap
Abbreviated Name
bcchForbiddenBmp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time bitmap used to determine whether

timeslot merging is forbidden on BCCH. If a time period is set in
the bitmap, services on the TCH carrier cannot be migrated to the
BCCH carrier.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[24]
2-898
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
According to the network conditions, a time period with high cell load
can be set to forbid timeslot merging on BCCH during this period so

that the system load can be reduced.
The default value is set to 0 so that timeslot merging is allowed
Reason
in all time periods.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.17.208 FastReturn to UTRAN

Full Name
FastReturn to UTRAN
Abbreviated Name
FastReturntoUTRAN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
After completing a call in a GSM network, a 3G dual-mode terminal

(TD-SCDMA/GSM or WCDMA/GSM) must return to the 3G network
as soon as possible. As specified in the 3GPP specification, the
"Cell selection indicator after release of all TCH and SDCCH"
IE in the Channel Release message can carry 3G neighbor cell
information to guide the terminal to the 3G network. This parameter
determines whether the IE carries the 3G neighbor cell information.
Instance
cell
2-899
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

ZGO-02-03-007 Fast Return from GSM to TD-SCDMA
0: Channel Release without UTRAN Neighbour Cell

1: Channel Release with UTRAN Neighbour Cell
2: Channel Release with UTRAN Neighbour Cell after handover
from UTRAN to GERAN
Unit
N/A
Default Value
Related Parameters
FastReturntoLTE
If FastReturnToUTRAN is set to 1, FastReturnToLTE can only be
Parameters
set to 0. If FastReturnToLTE is set to 1, FastReturnToUTRAN can

only be set to 0.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter must be set according to the network configuration
and operator requirements. In a GSM/3G network, fast return is

recommended to reduce the time required for the MS to return to
the 3G network.
Reason
and operator requirements. The default value is set to 0 (Channel

Release without UTRAN Neighbor Cell).
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.17.209 FastReturn to LTE

Full Name
FastReturn to LTE
2-900
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
FastReturntoLTE
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
After completing a call in a GSM network, a GSM/LTE dual-mode

terminal must return to the LTE network as soon as possible. As
specified in the 3GPP specification, the "Cell selection indicator after
release of all TCH and SDCCH" IE in the Channel Release message
can carry LTE neighbor cell information to guide the terminal to the
LTE network. This parameter determines whether the IE carries
LTE neighbor cell information.
Instance
cell
Related FG
N/A
0: Channel Release without E-UTRAN Neighbour Cell

1: Channel Release with E-UTRAN Neighbour Cell
2: Channel Release with E-UTRAN Neighbour Cell When CSFB
3: Channel Release with E-UTRAN Neighbour Cell When SRVCC
4: Channel Release with E-UTRAN Neighbour Cell When CSFB
and SRVCC
Unit
N/A
Default Value
Related Parameters
FastReturntoUTRAN
If FastReturnToUTRAN is set to 1, FastReturnToLTE can only be
Parameters
set to 0. If FastReturnToLTE is set to 1, FastReturnToUTRAN can

only be set to 0.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
and operator requirements. In a GSM/LTE network, fast return is

recommended to reduce the time required for the MS to return to
the LTE network.
Reason
and operator requirements. The default value is set to 0 (Channel

Release without E-UTRAN Neighbor Cell).
Change take effect
2-901
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.17.210 The switch of unblock cell about over VSWR alarm

Full Name
The switch of unblock cell about over VSWR alarm
Abbreviated Name
UnblkCellOverVSWRAlm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If this switch is enabled and an over-VSWR alarm occurs, a cell is

not blocked. The system automatically degrades the service quality
to avoid service interruption, which results in KPI degradation in the
cell. This parameter is only applied to SDR base stations.
Instance
Cell
Related FG
ZGO-06-01-010 VSWR Detetion
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-902
SJ-20140527134815-013|2015-03-10(R1.1)
This switch is disabled by default. It can be enabled as needed.
By default, a cell is blocked if an over-VSWR alarm occurs.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.18 Cell Precise Paging

Configuration(GCellPrecisePaging)
2.18.1 Cell Precise Paging Configuration ID
Full Name
Cell Precise Paging Configuration ID
Abbreviated Name
GCellPrecisePagingId
Managed Object
Cell Precise Paging Configuration(GCellPrecisePaging)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a cell precise paging configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-903
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Cell Precise Paging Configuration
N/A
2.18.2 Adopt Precise Paging for Circuit Switched Service

Full Name
Adopt Precise Paging for Circuit Switched Service
Abbreviated Name
csPrecisePag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether the precise paging is used for CS

services when the last service of a subscriber belongs to this cell.
Instance
Cell
Related FG
0: No
1: Yes
2-904
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
PrecisePagSupport
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
For the cell where MSs move fast, it is recommended to disable
the precise paging.
In most cases, the BSC-level switch can control the precise paging
Reason
function. Therefore, the cell-level switch for CS precise paging is

turned on by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.18.3 Adopt Precise Paging for Packet Switched Service

Full Name
Adopt Precise Paging for Packet Switched Service
Abbreviated Name
psPrecisePag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether the precise paging is used for CS

services when the last service of a subscriber belongs to this cell.
2-905
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
PrecisePagSupport
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
For the cell where MSs move fast, it is recommended to disable
the precise paging.
In most cases, the BSC-level switch can control the precise paging
Reason
function. Therefore, the cell-level switch for PS precise paging

is turned on by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.18.4 VPC Age Time

Full Name
VPC Age Time
Abbreviated Name
vpcAgeTime
Managed Object

2-906
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a timer to calculate the VPC aging time.

When the time since the last service is triggered exceeds the time
specified by this parameter, the VPC is not used as a precise paging
cell. If this parameter is set to 0, it indicates that the VPC is valid
permanently.
Instance
Cell
Related FG
0..65535
Unit
min
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set to 0 by default, meaning that it is valid
permanently. If this parameter is set to other values, the MS moving

speed should be considered, to calculate how long it can move out
of the configured VPC range.
This parameter is set to 0 because the MS who is not found in the
Reason
new cell is regarded as in the original cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-907
SJ-20140527134815-013|2015-03-10(R1.1)
2.18.5 Paging Hole Timer

Full Name
Paging Hole Timer
Abbreviated Name
pagHoleTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a timer to measure the paging black hole

time. If the paging time since the last service is triggered does
not exceeds the time specified by this timer, the paging black hole
counter starts.
Instance
Cell
Related FG
1..65535
Unit
N/A
Default Value
180
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the MS moving speed. If the
MS moves faster, this parameter should be set to a lower value;

otherwise, it should be set to higher value.
This parameter is set to 180 (3 min) by default because in most
Reason
cases, an MS stays in a cell for 3 minutes after the service in this

cell ends.
Change take effect
No
Access
Read/Write
2-908
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.19 Location Area(GLocationArea)

2.19.1 Location Area ID
Full Name
Location Area ID
Abbreviated Name
GLocationAreaId
Managed Object
Location Area(GLocationArea)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a location area ID.
Instance
BSC
Related FG
N/A
1..65533,65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
2-909
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Restricted
OMC Access path
GUI: Managed Element->GSM Logical Configuration->Location

Information Configuration->Location Area
N/A
2.19.2 LAC
Full Name
LAC
Abbreviated Name
lac
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
To locate an MS, each GSM PLMN is divided into multiple location

areas. A location area is uniquely identified by an LAC in a PLMN.
An LAC is a part of an LAI (LAI = MCC + MNC + LAC).There are
multiple cells within a location area.
Instance
LAC
Related FG
N/A
1..65533,65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-910
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is configured based on the operator's data planning.
This parameter is configured based on the operator requirements,
Reason
and has no default value.
Change take effect
No
Access
Restricted
OMC Access path

N/A
2.19.3 IMSI attach/detach allowed

Full Name
IMSI attach/detach allowed
Abbreviated Name
imsiAdAllowed
Managed Object
3GPP Name
ATT
3GPP Reference
N/A
Description
This parameter indicates whether IMSI Attach/Detach is allowed in

a cell. IMSI Detach indicates a process that the MS reports the
offline information to the network, meaning that the SIM card is
taken out of the MS.
The network (VLR) marks a "Detach" flag on the MS, then new
service requests of this MS is not admitted and the paging is not
required. Accordingly, the IMSI Attach indicates a process that
the MS reports the online information to the network, or the MS
checks whether the LAI where the MS is located is the same with
the saved one. If yes, the IMSI Attach process is started; otherwise,
the location update process is started instead.
The network (VLR) marks an "Attach" flag on the MS after receiving
the IMSI Attach or the location update information.
This parameter is included in "Control channel information" and is
used for the "RIL3_RR SYSTEM INFORMATION TYPE3" message.
2-911
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
N/A
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
This parameter should be configured as required. It is recommended
to use the default value if no special requirement.

In addition, this parameter of each cell in the same location area
should be the same.
This parameter is set to 1 (allowed) by default. It is recommended to
Reason
report this parameter when the MS is powered on/off.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.19.4 Periodical location updating timer

Full Name
Periodical location updating timer
Abbreviated Name
t3212
Managed Object
2-912
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
T3212
3GPP Reference
N/A
Description
Location updates in a GSM system can be divided into three types:

the normal location update caused by the changed MS location
(LAC is changed), the location update occurs after the MS is
powered on/off (IMSI Attach), and the periodically location update
specified by the network. The network controls how often the
periodical location update occurs. This parameter (T3212) controls
how long the time interval for periodical location update is. This
parameter is broadcasted to the MS in a cell through the message
RIL3_RR SYSTEM INFORMATION TYPE3.
Instance
Cell
Related FG
N/A
0..255
Unit
360s
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
This parameter is set based on the network capabilities and radio
resource utilization. If the traffic load of a service area is high, you

can set this parameter to a higher value (such as 16 hours, 20
hours, or even 25 hours). If the traffic load of a service area is
medium, you can set this parameter to a lower value (such as 3
hours or 6 hours). For the area where the system is overloaded
due to a high traffic load, it is recommended to set this parameter
to 0.By default, this parameter is set to 10 hours and should be the
same in the areas with same LACs. The value of the VLR periodical
update timer should be higher than that of this parameter. This
parameter is set to 10 by default, and should be less than the CN
implicit shutdown time. The value of this parameter (T3212) in
areas with same LACs should be the same. In the scenarios with
poor coverage, setting this parameter to a low value can help you to
improve the paging success rate.
2-913
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is configured by negotiating with the MSC, and set
Reason
to 10 by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.19.5 GPLMN DN
Full Name
GPLMN DN
Abbreviated Name
refGMPlmn
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a referred PLMN DN, that is, the public
operator's PLMN.
Instance
Cell
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
MocnAreaId
The MCC and MNC associated with an MocnAreaId must be the
Parameters
same.
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
2-914
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is configured in accordance with the data planned
for network sharing.
This parameter has no default value. It should be configured in
Reason
accordance with the data planned for network sharing.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.19.6 GMocnArea DN
Full Name
GMocnArea DN
Abbreviated Name
refGMocnArea
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a shared area DN, that is, a shared area
defined in GMocnArea.
Instance
Cell
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
2-915
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.20 Routing Area(GRoutingArea)

2.20.1 Routing Area ID
Full Name
Routing Area ID
Abbreviated Name
GRoutingAreaId
Managed Object
Routing Area(GRoutingArea)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a routing area ID.
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-916
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Routing Area
N/A
2.20.2 RAC
Full Name
RAC
Abbreviated Name
rac
Managed Object
Routing Area(GRoutingArea)
3GPP Name
N/A
3GPP Reference
N/A
2-917
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Routeing Area Identity (RAI), defined by an operator, identifies one

or several cells. A Routeing Area is a subset of one, and only one,
Location Area (LA), meaning that an RA cannot span more than
one LA. An RA is served by only one SGSN.RAC is only unique
when presented together with LAI.RAI= MCC+MNC+LAC+RAC.MS
initiates Routing area update procedure after cell reselection if RAI
has changed.
The location of an MS in STANDBY state is known in the SGSN on
an RA level.The MS is paged for packet services in the RA where the
MS is located when mobile-terminated traffic arrives in the SGSN.
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used for interconnection. It is configured based
on data planning.
This parameter is used for interconnection. It has no default value.
Reason
Change take effect
Yes
Access
Restricted
OMC Access path

Information Configuration->Routing Area
N/A
2-918
SJ-20140527134815-013|2015-03-10(R1.1)
2.21 AMR Configuration(GCellAmr)

2.21.1 AMR Configuration ID
Full Name
AMR Configuration ID
Abbreviated Name
GCellAmrId
Managed Object
AMR Configuration(GCellAmr)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an AMR configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->AMR Configuration
2-919
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.21.2 Support AMR Codec

Full Name
Support AMR Codec
Abbreviated Name
amrSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether AMR Codec is supported in a cell.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Compared with FR/EFR/HR codec algorithm that has the fixed
rate, AMR is recommended to use because it can provides a better

voice quality. LICENCE is required before enabling the AMR Codec
function.
The AMR Codec function is restricted by LICENSE, so the default
Reason
value of this parameter is set to Not Supported.
Change take effect
No
2-920
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.21.3 Use cell AMR parameter

Full Name
Use cell AMR parameter
Abbreviated Name
useCellAmrParam
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the AMR parameters are enabled

in a cell.
If no, the AMR parameters set in the BSC are preferred.
If yes, the AMR parameters of the cell are preferred.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is enabled if the AMR parameters are required to be
configured on a per-cell basis.
2-921
SJ-20140527134815-013|2015-03-10(R1.1)
In most cases, the AMR parameters can be uniformly set in the BSC
Reason
to simplify the configuration procedure.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.21.4 AMR full Active Codec Set(4.75kbps)

Full Name
AMR full Active Codec Set(4.75kbps)
Abbreviated Name
amrFullAcs1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether the ACS of AMR FR contains the

4.75 kbps codec mode.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
amrFrStartMode must be less than or equal to the number of
Parameters
amrFullAcs1~8 which value is 1.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-922
SJ-20140527134815-013|2015-03-10(R1.1)
The ACS is used by combining the high and low rates in different
scenarios. If the wireless signal in a cell is good, you can select the
higher rates. Otherwise, you can only select the lower rates.

Reason
The ACS contains the 12.2/7.4/5.9/4.75 rates that are recommended

by TS 28.062 and can be widely used by combining the high and
low rate in different scenarios.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFullAcs2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
2-923
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFullAcs3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether the ACS of AMR FR contains

the 5.9kbps codec mode.
Instance
Cell
Related FG
0..1
Unit
N/A
2-924
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFullAcs4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

2-925
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFullAcs5
Managed Object
2-926
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

2-927
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
amrFullAcs6
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-928
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrFullAcs7
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

2-929
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
amrFullAcs8
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the ACS of Full Rate AMR (FR
AMR) contains 12.2kbps.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
2-930
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.21.12 AMR Half Active Codec Set(4.75kbps)

Full Name
AMR Half Active Codec Set(4.75kbps)
Abbreviated Name
amrHalfAcs1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether the ACS of AMR HR contains the

Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
amrHrStartMode must be less than or equal to the number of
Parameters
amrHalfAcs1~5 which value is 1.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-931
SJ-20140527134815-013|2015-03-10(R1.1)
The ACS contains the 7.4/5.9/4.75 rates that are recommended
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrHalfAcs2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether the ACS of AMR HR contains

Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-932
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrHalfAcs3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
2-933
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
amrHalfAcs4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2-934
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrHalfAcs5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-935
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
amrHalfAcs6
2-936
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-937
SJ-20140527134815-013|2015-03-10(R1.1)
2.21.18 Thresholds of AMR FR 1

Full Name
Thresholds of AMR FR 1
Abbreviated Name
amrFrThresholds1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies a CIR threshold for decreasing the bit rate
of the AMR FR codec from 5.15 kbps. When the current bit rate on
a channel is 5.15 kbps, the AMR codec bit rate is decreased if the
detected CIR is lower than this threshold.
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
13
Related Parameters
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
amrFrThresholds1amrFrThresholds2amrFrThresholds3am-
Parameters
rFrThresholds4amrFrThresholds5amrFrThresholds6amrFrThresholds7,
amrFrThresholds1amrFrHysteresis1amrFrThresholds2
amrFrHysteresis2amrFrThresholds3amrFrHysteresis3amrFrThresholds4amrFrHysteresis4amrFrThresholds5
amrFrHysteresis5amrFrThresholds6amrFrHysteresis6amrFrThresholds7amrFrHysteresis7
Value Type
long
2-938
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, no modification is needed.
Reason
The default value is set according to the CIR obtained through

simulation for the corresponding AMR bit rate in case of FER being
1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFrThresholds2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..63
Unit
0.5dB
2-939
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
14
Related Parameters
amrFrThresholds1
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-940
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
amrFrThresholds3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
15
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
2-941
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFrThresholds4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-942
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
17
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
1%.
Change take effect
2-943
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFrThresholds5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
18
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
2-944
SJ-20140527134815-013|2015-03-10(R1.1)
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFrThresholds6
Managed Object
2-945
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
20
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-946
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFrThresholds7
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
23
2-947
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-948
SJ-20140527134815-013|2015-03-10(R1.1)
2.21.25 Thresholds of AMR HR 1

Full Name
Thresholds of AMR HR 1
Abbreviated Name
amrHrThresholds1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
of the AMR HR codec from 5.15 kbps. When the current bit rate on
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
18
Related Parameters
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
amrHrThresholds1amrHrThresholds2amrHrThresholds3am-
Parameters
rHrThresholds4amrHrThresholds5
,
amrHrThresholds1amrHrHysteresis1amrHrThresholds2
amrHrHysteresis2amrHrThresholds3amrHrHysteresis3amrHrThresholds4amrHrHysteresis4amrHrThresholds5
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-949
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrHrThresholds2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
20
2-950
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrHrThresholds1
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

2-951
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
amrHrThresholds3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
23
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-952
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrHrThresholds4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
26
2-953
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

2-954
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
amrHrThresholds5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
30
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-955
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.21.30 Hysteresis of AMR FR 1

Full Name
Hysteresis of AMR FR 1
Abbreviated Name
amrFrHysteresis1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies a CIR hysteresis for increasing the bit rate
of the AMR FR codec to 5.15 kbps. When the current bit rate on a
channel is lower than 5.15 kbps, the bit rate of the AMR FR codec is
increased to 5.15 kbps if the detected CIR is higher than the sum of
amrFrThresholds1 and amrFrHysteresis1.
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
2-956
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is set to obtain an appropriate difference between
Reason
the thresholds for increasing and decreasing the bit rate. This
difference prevents frequent rate adjustment and ensures timely
adjustment when necessary.
Change take effect
No
Access
Read/Write
OMC Access path

2-957
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
amrFrHysteresis2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
2-958
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFrHysteresis3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-959
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-960
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
amrFrHysteresis4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
2-961
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-962
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
amrFrHysteresis5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis6
amrFrHysteresis7
2-963
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFrHysteresis6
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-964
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-965
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrFrHysteresis7
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
2-966
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-967
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.21.37 Hysteresis of AMR HR 1

Full Name
Hysteresis of AMR HR 1
Abbreviated Name
amrHrHysteresis1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
of the AMR HR codec to 5.15 kbps. When the current bit rate on a
channel is lower than 5.15 kbps, the bit rate of the AMR HR codec is
amrHrThresholds1 and amrHrHysteresis1.
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
2-968
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrHrHysteresis2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..15
2-969
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
0.5dB
Default Value
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-970
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrHrHysteresis3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-971
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrHrHysteresis4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
2-972
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-973
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrHrHysteresis5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-974
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.21.42 Enable AMR FR noise control

Full Name
Enable AMR FR noise control
Abbreviated Name
amrFrNscb
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether AMR noise suppression on the MS

is disabled for the AMRFR speech version. The noise suppression
function on the MS can keep speech quality by reducing the
background noise.
The noise suppression function is used by the MS.
No: Noise suppression is enabled.
Yes: Noise suppression is disabled.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
2-975
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to enable the noise suppression function. When
speech quality is deteriorated, you can enable this parameter.
Enabling the noise suppression function for the MS can reduce
Reason
noise and improve speech quality.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.21.43 AMR FR Initial codec mode

Full Name
AMR FR Initial codec mode
Abbreviated Name
amrFrIcm
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-976
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies whether the initial codec mode of the

AMRFR speech version uses the codec mode specified by
Startmode, or the default initial codec mode defined in protocol
45.009. The initial codec modes specified in the protocol are as
follows:
1. When there is only one codec mode, this mode is used as the
initial codec mode.
2. When there are two or three codec modes, the mode with the
lowest rate is used as the initial codec mode.
4. When there are four codec modes, the mode with the second
For an A interface over IP, this parameter is not used. System
control parameter IpaAMRStartMode decides the initial codec mode.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If there is no requirement on how to set the initial codec mode, you
can select the initial codec mode specified in TS 45.009.
The default value is set to 1, meaning that the initial codec mode
Reason
is set as required.
Change take effect
No
Access
Read/Write
OMC Access path


2-977
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.21.44 AMR FR Start mode

Full Name
AMR FR Start mode
Abbreviated Name
amrFrStartMode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the initial codec mode for the AMR FR
speech version. The value of this parameter should not be greater
than the number of codec modes contained in the ACS. The
parameter values are described as follows:
1: The mode with the lowest rate is used as the initial codec mode.
2: The mode with the second lowest rate is used as the initial codec
mode.
3: The mode with the third lowest rate is used as the initial codec
mode.
4: The mode with the fourth lowest rate is used as the initial codec
mode.
Instance
Cell
Related FG
1..4
Unit
N/A
Default Value
Related Parameters
amrFullAcs1
amrFullAcs2
amrFullAcs3
amrFullAcs4
amrFullAcs5
amrFullAcs6
amrFullAcs7
amrFullAcs8
amrFrIcm
Parameters
2-978
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the cell has a better radio condition, you can select a higher initial
rate.
Using codec mode with a higher rate can help to keep better speech
Reason
quality.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.21.45 Enable AMR HR noise control

Full Name
Enable AMR HR noise control
Abbreviated Name
amrHrNscb
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

is disabled for the AMRHR speech version. The noise suppression
background noise.
Instance
Cell
Related FG

2-979
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to enable the noise suppression function. When
speech quality is deteriorated, you can enable this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.21.46 AMR HR Initial codec mode

Full Name
AMR HR Initial codec mode
Abbreviated Name
amrHrIcm
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-980
SJ-20140527134815-013|2015-03-10(R1.1)
Description

AMRHR speech version uses the codec mode specified by
follows:
initial codec mode.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
can select the initial codec mode specified in TS 45.009.
The default value is set to 1, meaning that the initial codec mode
Reason
is set as required.
Change take effect
No
Access
Read/Write
OMC Access path

2-981
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.21.47 AMR HR Start mode

Full Name
AMR HR Start mode
Abbreviated Name
amrHrStartMode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the initial codec mode for the AMRHR
than the number of codec modes contained in the ACS. The
parameter values are described as follows:
mode.
mode.
mode.
Instance
Cell
Related FG
1..4
Unit
N/A
Default Value
Related Parameters
amrHalfAcs1
amrHalfAcs2
amrHalfAcs3
amrHalfAcs4
amrHalfAcs5
amrHrIcm
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-982
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
If the cell has a better radio coverage, you can select a higher initial
rate to improve the speech quality.
Using codec mode with a higher rate can help to keep better speech
Reason
quality.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.21.48 AMR codec adjust mode

Full Name
AMR codec adjust mode
Abbreviated Name
amrAdjMode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
AMR adjustment mode consists of two types as follows: AMR fast

adjustment whose adjustment time is a default value determined by
the BTS, and the interval-based adjustment whose adjustment time
is set by the OAM. This parameter indicates AMR codec adjustment
modes that are valid in both of IPA and E1A.
when amrAdjMode =1
the adjustment time=amrAdjInterval*480ms
when amrAdjMode =0
the adjustment time=amrAdjInterval*20ms
AMR adjustment occurs when both the CIR threshold and the
adjustment time meet the requirements: the MS sends a CMR
message in the uplink speech frame to the BTS to request downlink
rate adjustment if the downlink CIR measured by the MS reaches its
threshold, or the BTS sends a CMC in the downlink speech frame to
2-983
SJ-20140527134815-013|2015-03-10(R1.1)
the MS to request uplink rate adjustment if the uplink CIR measured

by the BTS reaches its threshold. When the uplink/downlink CIR
meets its threshold, and the adjustment time arrives, the BTS sends
a CMC message to the MS or receives the adjustment request
sent by the MS, which means, AMR adjustment occurs. If the CIR
meets its threshold, but the adjustment time does not arrive, AMR
adjustment does not occur.
Instance
Cell
Related FG
0: AMR rapid speed mode

1: Interval of configuration's adjacent
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value (960 ms) is a proper time length for rate
adjustment. It needs no modification.
By default, the rate adjustment is 960 ms determined by the BTS.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-984
SJ-20140527134815-013|2015-03-10(R1.1)
2.21.49 AMR codec adjust interval

Full Name
AMR codec adjust interval
Abbreviated Name
amrAdjInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time interval for AMR codec

adjustment. This parameter is valid when the AmrAdjMode
parameter is set to "Interval-based adjustment mode". For more
details, refer to the description of the AmrAdjMode parameter.
Instance
Cell
Related FG
1..50
Unit
N/A
Default Value
Related Parameters
AmrAdjMode
This parameter is valid only if "AmrAdjMode" is set to "Interval-based
Parameters
Adjustment".
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
AMR fast adjustment mode is selected by default, so this parameter
needs no modification. If manual adjustment is required, you need

to select "Interval-based Adjustment" from the AMR adjustment
mode, and adjust this parameter. The higher the parameter is set,
the bigger the adjustment time interval will be, and the slower the
adjustment will be.
If this parameter is set to 1 (480 ms), AMR can be adjusted based
Reason
on channel quality.
Change take effect
No
2-985
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.21.50 BSS radio link timer's max value for AMR FR

Full Name
BSS radio link timer's max value for AMR FR
Abbreviated Name
bsRadioLkTmOutAMRFR
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
Description
This parameter indicates the maximum value (initial value) of the

counter S for detecting AMR-FR voice service failure. Specified in
GSM specifications, the counter S in the BTS is assigned a value
(the value of BsRadioLkTmout) when the call starts. This counter is
decremented by one when the BTS receives an SACCH message
but fails to decode it. This counter is incremented by two when the
BTS receives a correct SACCH message. The value of the counter
S cannot exceed its maximum value(the value of BsRadioLkTmout).
If this counter reaches 0, the BTS reports a radio link failure. This
counter is applicable to AMR-FR voice services.
Instance
Cell
Related FG
ZGO-04-02-007 AMR Radio Link Timers
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
2-986
SJ-20140527134815-013|2015-03-10(R1.1)
12: 52
13: 56
14: 60
15: 64
Unit
SACCH mf
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set to a high value, it means the channel with
poor quality can wait for a long time to be restored. If this parameter
is set to a low value, it means the channel with poor quality is not
easy to be restored, and a call drop occurs as soon as possible
to release the radio resources.
The default value is set to 15, which leaves enough time for restoring
Reason
calls, and helps to avoid unnecessary call drop.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.21.51 BSS radio link timer's max value for AMR HR

Full Name
BSS radio link timer's max value for AMR HR
Abbreviated Name
bsRadioLkTmOutAMRHR
Managed Object
2-987
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
Description

counter S for detecting AMR-HR voice service failure. Specified in
GSM specifications, the counter S in the BTS is assigned a value
counter is applicable to AMR-HR voice services.
Instance
Cell
Related FG
ZGO-04-02-007 AMR Radio Link Timers
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
SACCH mf
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-988
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.21.52 MAX value of MS Radio link timeout for AMR FR

Full Name
MAX value of MS Radio link timeout for AMR FR
Abbreviated Name
msRadioLkTmOutAMRFR
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
Description

counter S (for AMR FR) at the MS side, and is sent on the BCCH
or SACCH by the BSS.
the SACCH message (BFI=1), and incremented by two when
the MS successfully receives an SACCH message (BFI=0).If the
Instance
Cell
Related FG
2-989
SJ-20140527134815-013|2015-03-10(R1.1)
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path


2-990
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.21.53 MAX value of MS Radio link timeout for AMR HR

Full Name
MAX value of MS Radio link timeout for AMR HR
Abbreviated Name
msRadioLkTmOutAMRHR
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
Description

counter S (for AMR HR) at the MS side, and is sent on the BCCH
Instance
Cell
Related FG
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
2-991
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.21.54 Support AMR-WB Codec

Full Name
Support AMR-WB Codec
Abbreviated Name
SUPPORTAMRWB
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether the AMR-WB

function is supported in a cell. It is configured on a per-cell basis.
2-992
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
ZGO-01-01-004 Adaptive Multi-rate Codec Wideband (AMR-WB)
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
After this parameter is enabled, the AMR-WB function is supported
in this cell. As the AMR-WB function is rarely used at present, this

parameter is only enabled based on the operator's requirements.
The AMR-WB function is restricted by LICENSE, so the default
Reason
value of this parameter is set to Not Supported.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.21.55 Hysteresis of AMRWFS 1

Full Name
Hysteresis of AMRWFS 1
Abbreviated Name
amrWfsHysteresis1
Managed Object
2-993
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
hysteresis
3GPP Reference
N/A
Description
of the AMR WFS codec to 8.85 kbps. When the current bit rate on a
channel is lower than 8.85 kbps, the bit rate of the AMR WFS codec
is increased to 8.85 kbps if the detected CIR is higher than the sum
of amrWfsThresholds1 and amrWfsHysteresis1.
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrWfsThresholds1\amrWfsThresholds2\amrWfsThresholds3\amrWfsThresholds4
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
Parameters
amrWfsHysteresis2.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-994
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrWfsHysteresis2
Managed Object
3GPP Name
hysteresis
3GPP Reference
N/A
Description
of the AMR WFS codec to 12.65 kbps. When the current bit rate on
a channel is lower than 12.65 kbps, the bit rate of the AMR WFS
codec is increased to 12.65 kbps if the detected CIR is higher than
the sum of amrWfsThresholds2 and amrWfsHysteresis2.
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
Parameters
amrWfsHysteresis2.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-995
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.21.57 Hysteresis of AMROWFS 1

Full Name
Hysteresis of AMROWFS 1
Abbreviated Name
amrOwfsHysteresis1
Managed Object
3GPP Name
hysteresis
3GPP Reference
N/A
Description
of the AMR OWFS codec to 15.85 kbps. When the current bit rate
on a channel is lower than 15.85 kbps, the bit rate of the AMR
OWFS codec is increased to 15.85 kbps if the detected CIR is higher
than the sum of amrOwfsThresholds3 and amrOwfsHysteresis3.
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
amrOwfsThresholds1amrOwfsHysteresis1amrOwfsThresholds2
Parameters
amrOwfsHysteresis2amrOwfsThresholds3amrOwfsHysteresis3amrOwfsThresholds4amrOwfsHysteresis4
Value Type
long
Parameter Type
2-996
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
amrOwfsHysteresis2
Managed Object
3GPP Name
hysteresis
3GPP Reference
N/A
Description
of the AMR OWFS codec to 23.85 kbps. When the current bit rate
OWFS codec is increased to 23.85 kbps if the detected CIR is higher
than the sum of amrOwfsThresholds4 and amrOwfsHysteresis4.
Instance
Cell
Related FG
0..15
Unit
0.5dB
2-997
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
amrOwfsHysteresis3
Managed Object
2-998
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
hysteresis
3GPP Reference
N/A
Description
The hysteresis for changing AMROWFS mode consists

of four factors: amrWfsHysteresis1, amrWfsHysteresis2,
amrWfsHysteresis3, and amrWfsHysteresis4. The values must
meet the following condition:
amrWfsThresholds1+amrWfsHysteresis1<=amrWfsThresholds2+amrWfsHysteresis2<=amrWfsThresholds3+amrWfsHysteresis3<=amrWfsThresholds4+amrWfsHysteresis4
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
amrOwfsThresholds1+amrOwfsHysteresis1<=amrOwfsThresh-
Parameters
olds2+amrOwfsHysteresis2<=amrOwfsThresholds3+amrOwfsHysteresis3<=amrOwfsThresholds4+amrOwfsHysteresis4
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
You can judge whether this parameter is set properly by observing
the rate adjustment frequency. If the rate is adjusted too frequently,

you can increase this parameter.
The default value is set to keep a proper difference between the rate
Reason
increasing and decreasing thresholds to avoid frequent adjustment

and ensures the adjustment can be performed quickly.
Change take effect
No
2-999
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrOwfsHysteresis4
Managed Object
3GPP Name
hysteresis
3GPP Reference
N/A
Description
The hysteresis for changing AMROWFS mode consists

of four factors: amrWfsHysteresis1, amrWfsHysteresis2,
amrWfsHysteresis3, and amrWfsHysteresis4. The values must
meet the following condition:
amrWfsThresholds1+amrWfsHysteresis1<=amrWfsThresholds2+amrWfsHysteresis2<=amrWfsThresholds3+amrWfsHysteresis3<=amrWfsThresholds4+amrWfsHysteresis4
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsThresholds4
2-1000
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.21.61 Hysteresis of AMROWHS 1

Full Name
Hysteresis of AMROWHS 1
Abbreviated Name
amrOwhsHysteresis1
Managed Object
3GPP Name
hysteresis
3GPP Reference
N/A
2-1001
SJ-20140527134815-013|2015-03-10(R1.1)
Description
of the AMR OWHS codec to 8.85 kbps. When the current bit rate on
a channel is lower than 8.85 kbps, the bit rate of the AMR OWHS
the sum of amrOwhsThresholds1 and amrOwhsHysteresis1.
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrOwhsThresholds1amrOwhsThresholds2
The hysteresis for changing the AMROWHS mode includes two
Parameters
factors: amrOwhsHysteresis1 and amrOwhsHysteresis2. The

parameter values must meet the following condition:
amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2amrOwhsHysteresis2
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1002
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrOwhsHysteresis2
Managed Object
3GPP Name
hysteresis
3GPP Reference
N/A
Description
of the AMR OWHS codec to 12.65 kbps. When the current bit rate
OWHS codec is increased to 12.65 kbps if the detected CIR is higher
than the sum of amrOwhsThresholds2 and amrOwhsHysteresis2.
Instance
Cell
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
Parameters

parameter values must meet the following condition:
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-1003
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.21.63 Thresholds for AMRWFS 1

Full Name
Thresholds for AMRWFS 1
Abbreviated Name
amrWfsThresholds1
Managed Object
3GPP Name
threshold
3GPP Reference
N/A
Description
of the AMR WFS codec from 8.85 kbps. When the current bit rate
on a channel is 8.85 kbps, the bit rate of the AMR WFS codec is
decreased if the detected CIR is lower than this threshold.
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
Related Parameters
amrWfsHysteresis1\amrWfsHysteresis2\amrWfsHysteresis3\amrWfsHysteresis4
amrWfsThresholds1amrWfsThresholds2,amrWfsThresholds1
Parameters
amrWfsHysteresis1amrWfsThresholds2amrWfsHysteresis2
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1004
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
1%.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
amrWfsThresholds2
Managed Object
3GPP Name
threshold
3GPP Reference
N/A
Description
of the AMR WFS codec from 12.65 kbps. When the current bit rate
on a channel is 12.65 kbps, the bit rate of the AMR WFS codec is
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
Related Parameters
amrWfsHysteresis1\amrWfsHysteresis2\amrWfsHysteresis3\amrWfsHysteresis4
2-1005
SJ-20140527134815-013|2015-03-10(R1.1)
amrWfsThresholds1amrWfsThresholds2,amrWfsThresholds1
Parameters
amrWfsHysteresis1amrWfsThresholds2amrWfsHysteresis2
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
1%.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.21.65 Thresholds for AMROWFS 1

Full Name
Thresholds for AMROWFS 1
Abbreviated Name
amrOwfsThresholds1
Managed Object
3GPP Name
threshold
3GPP Reference
N/A
Description
of the AMR OWFS codec from 15.85 kbps. When the current bit rate
on a channel is 15.85 kbps, the bit rate of the AMR OWFS codec is
Instance
Cell
Related FG

2-1006
SJ-20140527134815-013|2015-03-10(R1.1)
0..63
Unit
0.5dB
Default Value
Related Parameters
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
amrOwfsThresholds1amrOwfsThresholds2amrOwfsThresh-
Parameters
olds3amrOwfsThresholds4,
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

1%.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

2-1007
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
amrOwfsThresholds2
Managed Object
3GPP Name
threshold
3GPP Reference
N/A
Description
of the AMR OWFS codec from 23.85 kbps. When the current bit rate
on a channel is 23.85 kbps, the bit rate of the AMR OWFS codec is
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
1%.
Change take effect
2-1008
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
amrOwfsThresholds3
Managed Object
3GPP Name
threshold
3GPP Reference
N/A
Description
This parameter specifies a CIR threshold for reducing the

AMROWFS codec rate from 15.85kbps.The rate is reduced when
the CIR is lower than the threshold.
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
2-1009
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter needs no modification. If this parameter is required
to be modified, you should adjust it when the frame error rate

detected by the BTS is around 1%.
The default value indicates the CIRs required by different
Reason
AMROWFS rates when the FER is 1%. These CIRs are obtained
through system simulation.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
amrOwfsThresholds4
Managed Object
3GPP Name
threshold
3GPP Reference
N/A
2-1010
SJ-20140527134815-013|2015-03-10(R1.1)
Description

AMROWFS codec rate from 23.85kbps.The rate is reduced when
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsHysteresis4
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter needs no modification. If this parameter is required
to be modified, you should adjust it when the frame error rate

detected by the BTS is around 1%.
The default value indicates the CIRs required by different
Reason
AMROWFS rates when the FER is 1%. These CIRs are obtained
through system simulation.
Change take effect
No
Access
Read/Write
OMC Access path


2-1011
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.21.69 Thresholds for AMROWHS 1

Full Name
Thresholds for AMROWHS 1
Abbreviated Name
amrOwhsThresholds1
Managed Object
3GPP Name
threshold
3GPP Reference
N/A
Description
of the AMR OWHS codec from 8.85 kbps. When the current bit rate
on a channel is 8.85 kbps, the bit rate of the AMR OWHS codec is
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
Related Parameters
amrOwhsHysteresis1\amrOwhsHysteresis2
There are two thresholds for changing AMROWHS mode, which
Parameters
are represented by two parameters: amrOwhsThresholds1 and

amrOwhsThresholds2. The following conditions must be met:
amrOwhsThresholds1amrOwhsThresholds2,
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
1%.
2-1012
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
amrOwhsThresholds2
Managed Object
3GPP Name
threshold
3GPP Reference
N/A
Description
of the AMR OWHS codec from 12.65 kbps. When the current bit
rate on a channel is 12.65 kbps, the bit rate of the AMR OWHS
codec is decreased if the detected CIR is lower than this threshold.
Instance
Cell
Related FG
0..63
Unit
0.5dB
Default Value
Related Parameters
amrOwhsHysteresis1\amrOwhsHysteresis2
Parameters

amrOwhsThresholds1amrOwhsThresholds2,
Value Type
long
2-1013
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

1%.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

timeout for AMR WFS
Full Name
MAX value of MS Radio link

timeout for AMR WFS
Abbreviated Name
msRadioLkOutAmrWfs
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
2-1014
SJ-20140527134815-013|2015-03-10(R1.1)
Description

counter S (for AMR WFS) at the MS side, and is sent on the BCCH
Instance
Cell
Related FG
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1015
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name

Abbreviated Name
msRadioLkOutAmrOwfs
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
Description

counter S (for AMR-WB OWFS) at the MS side, and is sent on the
BCCH or SACCH by the BSS.
Instance
Cell
Related FG
2-1016
SJ-20140527134815-013|2015-03-10(R1.1)
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path


2-1017
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name

Abbreviated Name
msRadioLkOutAmrOwhr
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
Description

counter S (for AMR-WB OWHS) at the MS side, and is sent on the
BCCH or SACCH by the BSS.
Instance
Cell
Related FG
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
2-1018
SJ-20140527134815-013|2015-03-10(R1.1)
15: 64
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.21.74 BSS radio link timer's max value for FR-AMR-WB

Full Name
BSS radio link timer's max value for FR-AMR-WB
Abbreviated Name
bsRadioLkOutAMRWFS
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
2-1019
SJ-20140527134815-013|2015-03-10(R1.1)
Description

counter S for detecting FR-AMR-WB voice service failure. Specified
in GSM specifications, the counter S in the BTS is assigned a value
counter is applicable to FR-AMR-WB voice services.
Instance
Cell
Related FG
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1020
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.21.75 BSS radio link timer's max value for OFR-AMR-WB

Full Name
BSS radio link timer's max value for OFR-AMR-WB
Abbreviated Name
bsRadioLkOutAmrOwfs
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
Description
This parameter indicates the maximum value (initial value) of

the counter S for detecting OFR-AMR-WB voice service failure.
Specified in GSM specifications, the counter S in the BTS is
assigned a value (the value of BsRadioLkTmout) when the
call starts. This counter is decremented by one when the BTS
receives an SACCH message but fails to decode it. This counter
is incremented by two when the BTS receives a correct SACCH
message. The value of the counter S cannot exceed its maximum
value(the value of BsRadioLkTmout). If this counter reaches 0,
the BTS reports a radio link failure. This counter is applicable to
OFR-AMR-WB voice services.
Instance
Cell
2-1021
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
2-1022
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.21.76 BSS radio link timer's max value for AMR OWHR
Full Name
BSS radio link timer's max value for AMR OWHR
Abbreviated Name
bsRadioLkOutAmrOwhr
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
N/A
Description
This parameter indicates the maximum value (initial value) of

the counter S for detecting OHR-AMR-WB voice service failure.
Specified in GSM specifications, the counter S in the BTS is
assigned a value (the value of BsRadioLkTmout) when the
call starts. This counter is decremented by one when the BTS
receives an SACCH message but fails to decode it. This counter
is incremented by two when the BTS receives a correct SACCH
message. The value of the counter S cannot exceed its maximum
value(the value of BsRadioLkTmout). If this counter reaches 0,
the BTS reports a radio link failure. This counter is applicable to
OHR-AMR-WB voice services.
Instance
Cell
Related FG
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
2-1023
SJ-20140527134815-013|2015-03-10(R1.1)
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.22 Frequency Hopping System(GHoppingFrequency)

2.22.1 Frequency Hopping System ID
Full Name
Frequency Hopping System ID
2-1024
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
GHoppingFrequencyId
Managed Object
Frequency Hopping System(GHoppingFrequency)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a frequency hopping system ID.
Instance
BSC
Related FG
N/A
1..254
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Frequency Hopping System
N/A
2.22.2 FhsID
2-1025
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
FhsID
Abbreviated Name
fhsId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter identifies an RF frequency-hopping group.
Instance
Cell
Related FG
ZGO-04-03-001 Synthesized Frequency Hopping
1..254
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2-1026
SJ-20140527134815-013|2015-03-10(R1.1)
2.22.3 Hopping sequence No.

Full Name
Hopping sequence No.
Abbreviated Name
HSN
Managed Object

3GPP Name
hopping sequence number
3GPP Reference
N/A
Description
According to GSM 05.02 Frequency Hoping Algorithm, MAI is a

function of TDMA Frame Number (FN), Hoping Sequence Number
(HSN) and Mobile Allocation Index Offset (MAIO). The HSN
determines which way the frequencies will go during the frequency
hopping process. Using different HSN for cells having same MA can
avoid frequency utilization conflicts between neighbor cells during
the frequency hopping process.
Different timeslots can share a group of MA and corresponding
HSNs. When HSN = 0, it means a special frequency hopping
(circular frequency hopping).
For cells having same MA, using different HSN can avoid frequency
utilization conflicts between neighbor cells during the frequency
hopping process.
The HSN can be derived from the BCC in a cell, because cells using
the same MA also have the same BCCHs. For example, if HSN
[(BCC6) +1, .., (BCC6) +6], then each cell may use any of the 6
HSNs. The remaining 0 and 49-63 are used in other special cases.
For easier implementation, the default value is set to 0.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1027
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is configured based on radio network planning, and
it is not recommended to set the HSN to 0.
N/A
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.22.4 MA Frequency List

Full Name
MA Frequency List
Abbreviated Name
MaArfcnList
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter provides a list of absolute RF channel numbers in a

frequency hopping group. It is a CA sub-set of the home cell. This
parameter notifies the MS about which channel it should use and
some other related information.
Users can add or delete an absolute RF channel number through
this parameter.
Instance
Cell
Related FG
0..1023
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-1028
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long[63]
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.23 Baseband Hopping System(GHoppingBaseband)

2.23.1 Baseband Hopping System ID
Full Name
Baseband Hopping System ID
Abbreviated Name
GHoppingBasebandId
Managed Object
Baseband Hopping System(GHoppingBaseband)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a baseband hopping system ID.
Instance
BSC
Related FG
N/A
2-1029
SJ-20140527134815-013|2015-03-10(R1.1)
1..254
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Baseband Hopping System
N/A
2.23.2 FhsID
Full Name
FhsID
Abbreviated Name
fhsId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter identifies a baseband frequency-hopping group.
Instance
Cell
2-1030
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
1..254
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.23.3 Hopping sequence No.

Full Name
Hopping sequence No.
Abbreviated Name
HSN
Managed Object

3GPP Name
hopping sequence number
3GPP Reference
N/A
2-1031
SJ-20140527134815-013|2015-03-10(R1.1)
Description
According to GSM 05.02 Frequency Hoping Algorithm, MAI is a

function of TDMA Frame Number (FN), Hoping Sequence Number
(HSN) and Mobile Allocation Index Offset (MAIO). The HSN
determines which way the frequencies will go during the frequency
hopping process. Using different HSN for cells having same MA can
avoid frequency utilization conflicts between neighbor cells during
the frequency hopping process.
Different timeslots can share a group of MA and corresponding
HSNs. When HSN = 0, it means a special frequency hopping
(circular frequency hopping).
For cells having same MA, using different HSN can avoid frequency
utilization conflicts between neighbor cells during the frequency
hopping process.
The HSN can be derived from the BCC in a cell, because cells using
the same MA also have the same BCCHs. For example, if HSN
[(BCC6) +1, .., (BCC6) +6], then each cell may use any of the 6
HSNs. The remaining 0 and 49-63 are used in other special cases.
For easier implementation, the default value is set to 0.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured based on radio network planning, and
it is not recommended to set the HSN to 0.
N/A
Reason
Change take effect
Yes
2-1032
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.23.4 MA Frequency List

Full Name
MA Frequency List
Abbreviated Name
MaArfcnList
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter provides a list of absolute RF channel numbers in a

frequency hopping group. It is a CA sub-set of the home cell. This
parameter notifies the MS about which channel it should use and
some other related information.
Instance
Cell
Related FG
0..1023
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long[64]
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
2-1033
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.24 Handover Control(GHandoverControl)

2.24.1 Handover Control ID
Full Name
Handover Control ID
Abbreviated Name
GHandoverControlId
Managed Object
Handover Control(GHandoverControl)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a handover control ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1034
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Handover Control
N/A
2.24.2 Uplink power level Sample count

Full Name
Uplink power level Sample count
Abbreviated Name
hoUlLevWindow
Managed Object
3GPP Name
Hreqave
3GPP Reference
N/A
Description
In the GSM system, the BSC makes handover decisions according

to the measurement data. To avoid the negative impact of burst
measurement values resulting from complicated radio transmission,
the BSC, when making a handover decision, no longer uses the
original measurement data but instead a series of average values of
the measurement data.
This parameter specifies the window size (the number of samples)
used to calculate the average uplink signal strength.
It is used for the TCH handover.
Instance
Cell
Related FG
1..20
Unit
N/A
2-1035
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is too small, the number of samples for
making handover decision is too small and the decisions are not
accurate.
If the parameter value is too large, the period needed by a handover
decision is so long that the call may be dropped.
On the one hand, there should be enough number of samples to
Reason
ensure the accuracy of handover decisions, and on the other hand,

to avoid call drops, the handover should be performed as early as
possible when signal quality is poor.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.3 Uplink level Weight

Full Name
Uplink level Weight
Abbreviated Name
hoUlLevWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1036
SJ-20140527134815-013|2015-03-10(R1.1)
Description
In accordance with the GSM specifications, Discontinuous

Transmission (DTX) means that the system does not transmit
signals while the phone lacks a voice input.
In DTX mode, the measurement data reported to BSC falls into
two types. One is the average of the measurement results of all
timeslots in a measurement period in non-DTX mode, and the other
is the average of the measurement results of some special timeslots
in a measurement period in DTX mode. The BSC selects a type of
measurement data for calculating the average based on the actual
conditions.
The first type of measurement data is the average of the
measurement results of all timeslots, so it is accurate. The second
type of measurement data is the average of the measurement
results of some timeslots, so it is less accurate. Therefore, when
averaging the measurement values, the BSC needs to use different
weights for the two types of measurement data.
The HoUlLevWeight parameter determines the weight for the first
type of measurement data in averaging uplink signal strength for
handover. The weight for the second type of measurement data is
set to 1 by default.
Instance
Cell
Related FG
1..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter needs no modification. If you need to decrease the
weight in a measurement period in DTX mode, you can set this

parameter to a higher value.
In non-DTX mode, the measurement data is more accuracy, so the
Reason
weight is higher.
Change take effect
2-1037
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.24.4 Downlink power level Sample count

Full Name
Downlink power level Sample count
Abbreviated Name
hoDlLevWindow
Managed Object
3GPP Name
Hreqave
3GPP Reference
N/A
Description

used to calculate the average downlink signal strength.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1038
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.5 Downlink level Weight

Full Name
Downlink level Weight
Abbreviated Name
hoDlLevWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1039
SJ-20140527134815-013|2015-03-10(R1.1)
Description

conditions.
The HoDlLevWeight parameter determines the weight for the first
type of measurement data in averaging downlink signal strength for
Instance
Cell
Related FG
1..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
weight is higher.
Change take effect
2-1040
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.24.6 Uplink quality Sample count

Full Name
Uplink quality Sample count
Abbreviated Name
hoUlQualWindow
Managed Object
3GPP Name
Hreqave
3GPP Reference
N/A
Description

used to calculate the average uplink signal quality.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1041
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.7 Uplink quality Weight

Full Name
Uplink quality Weight
Abbreviated Name
hoUlQualWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1042
SJ-20140527134815-013|2015-03-10(R1.1)
Description

conditions.
The HoUlQualWeight parameter determines the weight for the first
type of measurement data in averaging uplink signal quality for
Instance
Cell
Related FG
1..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
weight is higher.
Change take effect
2-1043
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.24.8 Downlink quality Sample count

Full Name
Downlink quality Sample count
Abbreviated Name
hoDlQualWindow
Managed Object
3GPP Name
Hreqave
3GPP Reference
N/A
Description

used to calculate the average downlink signal quality.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1044
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.9 Downlink quality Weight

Full Name
Downlink quality Weight
Abbreviated Name
hoDlQualWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1045
SJ-20140527134815-013|2015-03-10(R1.1)
Description

conditions.
The HoDlQualWeight parameter determines the weight for the first
type of measurement data in averaging downlink signal quality for
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
weight is higher.
Change take effect
2-1046
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.24.10 Distance Sample count

Full Name
Distance Sample count
Abbreviated Name
distanceWindow
Managed Object
3GPP Name
Hreqave
3GPP Reference
N/A
Description

used to calculate the distance (actually the Timing Advance (TA))
between an MS and the BTS.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1047
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.11 Neighboring cell Sample count

Full Name
Neighboring cell Sample count
Abbreviated Name
ncellWindow
Managed Object
3GPP Name
Hreqave
3GPP Reference
N/A
2-1048
SJ-20140527134815-013|2015-03-10(R1.1)
Description

used to calculate the average signal strength of neighbor cells.
This parameter is used for TCH handover, and only for
non-emergency handover.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

2-1049
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.12 Number of zero allowed in AV

Full Name
Number of zero allowed in AV
Abbreviated Name
zeroAllowed
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
According to GSM specifications, an MS can report measured

data of up to six neighbor cells with strongest signal strength.
Therefore, the measurement results recorded by the BSC may
not be consecutive. For cells whose signal strength is less than
-110 dBm, the measured data is not reported. The BSC marks the
measured data of these unreported cells as zero.
To avoid the negative impact of zeros on averaging, suppose
that occasional zeros are allowed and are not used in averaging.
However, excessive occurrences of zeros indicate that the signals
of this neighbor cell are poor.
This parameter specifies the number of occurrences of zeros used
for average calculation that can be allowed or ignored during
averaging.
To be specific, during averaging, if the number of zeros in the
sample exceeds ZeroAllowed, these sample values are regarded
as unreliable, and the measurement average is the sum of the
reported values divided by NCellWindow. If the number of zeros in
the reported values does not exceed ZeroAllowed, these sample
values are regarded as reliable, and the measurement average
is the sum of the reported values divided by (NCellWindow the
number of zeros).
Instance
Cell
Related FG
0..20
Unit
N/A
Default Value
1
2-1050
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the number of allowed zeros is set to be too small, good neighbor
cells may be ignored.

If the number of allowed zeros is set to be too large, UEs may be
handed over to neighbor cells with poor signal quality.
It is recommended to set a small value to select neighbor cells with
good signal quality.
If there is a zero in the testing sample, it is regarded as an
Reason
occasional occurrence that is acceptable and does not affects the

evaluation for the neighbor cells.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.13 MIN interval between inter-cell handover

Full Name
MIN interval between inter-cell handover
Abbreviated Name
hoMinInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1051
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies the interval for which an MS waits before

an actual inter-cell handover occurs. Such a timer is predominant for
the MSs at the boundary areas between two cells, where inter-cell
handover occurs frequently. This parameter helps restrict frequent
inter-cell handover and improves call quality.
An inter-cell handover takes place when the timer exceeds the
defined interval value from the last inter-cell handover of the MS.
This parameter does not affect common intra-cell or intra-cell
concentric handover but instead the inter-cell handover.
The default value can be set to 5.
Instance
Cell
Related FG
0..31
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set to a high value, it means the time interval
between two handover is long, which can avoid frequent handover

but handover delay occurs easily.
If this parameter is set to a low value, it means the time interval
between two handover is short. As a result, the handover is
triggered quickly, but frequent handover occurs easily.
The default value is set to 5 s. Based on the on-site experience,
Reason
the MS is handed over to a cell with better signal quality instead

of handover back to the original cell within 5 s, to avoid repeated
handover failure.
Change take effect
No
Access
Read/Write
2-1052
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.24.14 Max time advance threshold between MS and BTS

Full Name
Max time advance threshold between MS and BTS
Abbreviated Name
distanceThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
In accordance with GSM specifications, a handover decision can be

made after the required average values are acquired.
The distance between an MS and the BTS is one of the reasons
for handover. For the N averages of the latest TAs (distance), if P
averages of them are greater than this threshold, the MS is handed
over because the MS is beyond the coverage of the cell.
Instance
Cell
Related FG
{parent.cellType==0}[0..63],
{parent.cellType==4}[0..219]
Unit
N/A
Default Value
{parent.cellType==0}63,
{parent.cellType==4}219
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1053
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
When a TA handover is used, you need to set this parameter
properly. Generally, this parameter is set to the timing advance of

TA handover initiated after the MS is beyond the coverage range
planned by the BTS for a certain distance.
The default value is set to the maximum value because the TA
Reason
handover is not usually used.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.24.15 Uplink receive level Threshold

Full Name
Uplink receive level Threshold
Abbreviated Name
hoUlLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1054
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the uplink receiving level threshold for a

TCH handover decision.
The uplink receiving level is one of the reasons for handover. For
the N averages of the recent uplink receiving level values, if P
averages of them are less than the threshold, the MS should be
handed over because the uplink receiving level value is too low.
The HoUlLevThs parameter defines the related threshold value,
HoUlLevN the value of N, and HoUlLevP the value of P.
Usually the value of HoUlLevThs should be less than the threshold
for uplink power control (increase). In this case, power is controlled
first. If power control does not work, handover is performed.
Instance
Cell
Related FG
0: <-110
1: -110~-109
2: -109~-108
3: -108~-107
4: -107~-106
5: -106~-105
6: -105~-104
7: -104~-103
8: -103~-102
9: -102~-101
10: -101~-100
11: -100~-99
12: -99~-98
13: -98~-97
14: -97~-96
15: -96~-95
16: -95~-94
17: -94~-93
18: -93~-92
19: -92~-91
20: -91~-90
21: -90~-89
22: -89~-88
23: -88~-87
24: -87~-86
25: -86~-85
26: -85~-84
27: -84~-83
28: -83~-82
2-1055
SJ-20140527134815-013|2015-03-10(R1.1)
29: -82~-81
30: -81~-80
31: -80~-79
32: -79~-78
33: -78~-77
34: -77~-76
35: -76~-75
36: -75~-74
37: -74~-73
38: -73~-72
39: -72~-71
40: -71~-70
41: -70~-69
42: -69~-68
43: -68~-67
44: -67~-66
45: -66~-65
46: -65~-64
47: -64~-63
48: -63~-62
49: -62~-61
50: -61~-60
51: -60~-59
52: -59~-58
53: -58~-57
54: -57~-56
55: -56~-55
56: -55~-54
57: -54~-53
58: -53~-52
59: -52~-51
60: -51~-50
61: -50~-49
62: -49~-48
63: >-48
Unit
dBm
Default Value
Related Parameters
PcUlInclLevThs
Parameters
(PcUlInclLevThs) for uplink power control (increase). In this case,

power is controlled first. If power control does not work, handover is
performed.
Value Type
long
2-1056
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the threshold is, the more difficult a handover is triggered.
The smaller the threshold is, the more easily a handover is triggered.
A too large threshold may cause an increase of the call drop rate. A
too small threshold may cause too many handovers.
When the uplink receiving level is smaller than -103dBm, handover
Reason
is required because the signal quality is poor.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.16 Downlink receive level Threshold

Full Name
Downlink receive level Threshold
Abbreviated Name
hoDlLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1057
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the downlink receiving level threshold for a

made after the required average values are acquired. The downlink
receiving value is one of the reasons for handover. For the N
averages of the recent downlink receiving level values, if P averages
of them are less than the threshold, the MS should be handed over
because the downlink receiving value is too low.
The HoDlLevThs parameter defines the related threshold value,
HoDlLevN the value of N, and HoDlLevP the value of P.
Usually the value of HoDlLevThs should be less than the threshold
for downlink power control (increase). In this case, power is
controlled first. If power control does not work, handover is
performed. This parameter can be set to 15 (from 96 dBm to 95
dBm) by default. It should be noted that the value should be 3 dB
more than the value of the minimum access level (RxLevAccessMin)
of the cell.
Instance
Cell
Related FG
0: <-110
1: -110~-109
2: -109~-108
3: -108~-107
4: -107~-106
5: -106~-105
6: -105~-104
7: -104~-103
8: -103~-102
9: -102~-101
10: -101~-100
11: -100~-99
12: -99~-98
13: -98~-97
14: -97~-96
15: -96~-95
16: -95~-94
17: -94~-93
18: -93~-92
19: -92~-91
20: -91~-90
21: -90~-89
22: -89~-88
23: -88~-87
24: -87~-86
2-1058
SJ-20140527134815-013|2015-03-10(R1.1)
25: -86~-85
26: -85~-84
27: -84~-83
28: -83~-82
29: -82~-81
30: -81~-80
31: -80~-79
32: -79~-78
33: -78~-77
34: -77~-76
35: -76~-75
36: -75~-74
37: -74~-73
38: -73~-72
39: -72~-71
40: -71~-70
41: -70~-69
42: -69~-68
43: -68~-67
44: -67~-66
45: -66~-65
46: -65~-64
47: -64~-63
48: -63~-62
49: -62~-61
50: -61~-60
51: -60~-59
52: -59~-58
53: -58~-57
54: -57~-56
55: -56~-55
56: -55~-54
57: -54~-53
58: -53~-52
59: -52~-51
60: -51~-50
61: -50~-49
62: -49~-48
63: >-48
Unit
dBm
Default Value
15
Related Parameters
PcDlInclLevThs
2-1059
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters

performed.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When the downlink receiving level is smaller than -95dBm, handover
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.17 Uplink receive quality Threshold

Full Name
Uplink receive quality Threshold
Abbreviated Name
hoUlQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1060
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the uplink receiving quality threshold for a

made after the required average values are acquired. The uplink
receiving quality is one of the reasons for handover. For the N
averages of the recent uplink receiving quality, if P averages of
them are greater than the threshold, the MS should be handed over
because the uplink receiving quality is too poor.
The HoUlQualThs parameter defines the related threshold value,
HoUlQualN the value of N, and HoUlQualP the value of P.
Usually the value of HoUlQualThs should be greater than the
threshold for uplink power control (increase). In this case, power
is controlled first. If power control does not work, handover is
performed.
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
49
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When the uplink receiving quality level is larger than 4.9, handover
Reason
Change take effect
No
Access
Read/Write
2-1061
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.24.18 Downlink receive quality Threshold

Full Name
Downlink receive quality Threshold
Abbreviated Name
hoDlQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink receiving quality threshold for

a TCH handover decision.
averages of the recent downlink receiving quality, if P averages of
because the downlink receiving quality is too poor.
The HoDlQualThs parameter defines the related threshold value,
HoDlQualN the value of N, and HoDlQualP the value of P.
Usually the value of HoDlQualThs should be greater than the
threshold (PcDlInclQualThs in R_POC) for downlink power control
(increase). In this case, power is controlled first. If power control
does not work, handover is performed.
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
49
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1062
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
When the downlink receiving quality level is larger than 4.9,
Reason
handover is required because the signal quality is poor.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.19 Uplink receive level of intra-ho Threshold

Full Name
Uplink receive level of intra-ho Threshold
Abbreviated Name
intraHoUlLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1063
SJ-20140527134815-013|2015-03-10(R1.1)
Description
In accordance with GSM specifications, a handover decision can

be made after the required average values are acquired. Uplink
co-channel interference is one of the reasons for handover. For
averages of them are greater than the threshold and the uplink
quality handover condition is fulfilled, the MS should be handed over
because the uplink co-channel interference is too strong.
The IntraHoUlLevThs parameter defines the related threshold value,
IntraHoUlLevN the value of N, and IntraHoUlLevP the value of P. If
this handover condition is fulfilled, an internal handover is usually
performed in the cell.
Generally, the value of IntraHoUlLevThs should be greater than the
threshold causing uplink power control (decrease).
Instance
Cell
Related FG
0: <-110
1: -110~-109
2: -109~-108
3: -108~-107
4: -107~-106
5: -106~-105
6: -105~-104
7: -104~-103
8: -103~-102
9: -102~-101
10: -101~-100
11: -100~-99
12: -99~-98
13: -98~-97
14: -97~-96
15: -96~-95
16: -95~-94
17: -94~-93
18: -93~-92
19: -92~-91
20: -91~-90
21: -90~-89
22: -89~-88
23: -88~-87
24: -87~-86
25: -86~-85
26: -85~-84
27: -84~-83
28: -83~-82
2-1064
SJ-20140527134815-013|2015-03-10(R1.1)
29: -82~-81
30: -81~-80
31: -80~-79
32: -79~-78
33: -78~-77
34: -77~-76
35: -76~-75
36: -75~-74
37: -74~-73
38: -73~-72
39: -72~-71
40: -71~-70
41: -70~-69
42: -69~-68
43: -68~-67
44: -67~-66
45: -66~-65
46: -65~-64
47: -64~-63
48: -63~-62
49: -62~-61
50: -61~-60
51: -60~-59
52: -59~-58
53: -58~-57
54: -57~-56
55: -56~-55
56: -55~-54
57: -54~-53
58: -53~-52
59: -52~-51
60: -51~-50
61: -50~-49
62: -49~-48
63: >-48
Unit
dBm
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
2-1065
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
The uplink measurement data is reported every 20 ms and the
downlink measurement data 200 ms, which indicates that the

average window size is greater than the downlink window size.
The default value is set to ensure fast and accurate triggering of
Reason
handover.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.20 Downlink receive level of intra-ho Threshold

Full Name
Downlink receive level of intra-ho Threshold
Abbreviated Name
intraHoDlLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

made after the required average values are acquired. Downlink
the N averages of the recent downlink receiving level values, if P
averages of them are greater than the threshold and the downlink
because the downlink co-channel interference is too strong.
The IntraHoDlLevThs parameter defines the related threshold value,
IntraHoDlLevN the value of N, and IntraHoDlLevP the value of P. If
2-1066
SJ-20140527134815-013|2015-03-10(R1.1)
Generally, the value of IntraHoDlLevThs should be less than or

equal to the threshold causing downlink power control (decrease).
Instance
Cell
Related FG
0: <-110
1: -110~-109
2: -109~-108
3: -108~-107
4: -107~-106
5: -106~-105
6: -105~-104
7: -104~-103
8: -103~-102
9: -102~-101
10: -101~-100
11: -100~-99
12: -99~-98
13: -98~-97
14: -97~-96
15: -96~-95
16: -95~-94
17: -94~-93
18: -93~-92
19: -92~-91
20: -91~-90
21: -90~-89
22: -89~-88
23: -88~-87
24: -87~-86
25: -86~-85
26: -85~-84
27: -84~-83
28: -83~-82
29: -82~-81
30: -81~-80
31: -80~-79
32: -79~-78
33: -78~-77
34: -77~-76
35: -76~-75
36: -75~-74
37: -74~-73
38: -73~-72
39: -72~-71
2-1067
SJ-20140527134815-013|2015-03-10(R1.1)
40: -71~-70
41: -70~-69
42: -69~-68
43: -68~-67
44: -67~-66
45: -66~-65
46: -65~-64
47: -64~-63
48: -63~-62
49: -62~-61
50: -61~-60
51: -60~-59
52: -59~-58
53: -58~-57
54: -57~-56
55: -56~-55
56: -55~-54
57: -54~-53
58: -53~-52
59: -52~-51
60: -51~-50
61: -50~-49
62: -49~-48
63: >-48
Unit
dBm
Default Value
40
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handover.
Change take effect
No
2-1068
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.21 Uplink receive level Value P

Full Name
Uplink receive level Value P
Abbreviated Name
hoUlLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the P value used for TCH handover caused
by the uplink receiving level.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
hoUlLevN
2-1069
SJ-20140527134815-013|2015-03-10(R1.1)
HoUlLevP<=HoUlLevN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is large, the handover condition is strict and handover
is difficult. If the value is too large, call drops may increase. If the
value is too small, unnecessary handover may occur.
The default value is set to ensure rapid and correct handover.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.22 Uplink receive level Value N

Full Name
Uplink receive level Value N
Abbreviated Name
hoUlLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1070
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the N value used for TCH handover

caused by the uplink receiving level.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
hoUlLevP
HoUlLevP<=HoUlLevN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Adjusting the parameter to a larger value improves the probability
of correct handover decisions but reduces the timeliness of

decision-making. Adjusting the parameter to a smaller value
reduces the probability of correct handover decisions but improves
the timeliness of decision-making.
Reason
Change take effect
No
Access
Read/Write
2-1071
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.24.23 Downlink receive level Value P

Full Name
Downlink receive level Value P
Abbreviated Name
hoDlLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
by the downlink receiving level.
of the cell.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
hoDlLevN
2-1072
SJ-20140527134815-013|2015-03-10(R1.1)
HoDlLevP<=HoDlLevN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.24 Downlink receive level Value N

Full Name
Downlink receive level Value N
Abbreviated Name
hoDlLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1073
SJ-20140527134815-013|2015-03-10(R1.1)
Description

caused by the downlink receiving level.
of the cell.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
hoDlLevP
HoDlLevP<=HoDlLevN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
2-1074
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.25 Uplink receive quality Value P

Full Name
Uplink receive quality Value P
Abbreviated Name
hoUlQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
by the uplink receiving quality.
performed.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
hoUlQualN
2-1075
SJ-20140527134815-013|2015-03-10(R1.1)
HoUlQualP<=HoUlQualN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.26 Uplink receive quality Value N

Full Name
Uplink receive quality Value N
Abbreviated Name
hoUlQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1076
SJ-20140527134815-013|2015-03-10(R1.1)
Description

caused by the uplink receiving quality.
performed.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
hoUlQualP
HoUlQualP<=HoUlQualN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
2-1077
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.24.27 Downlink receive quality Value P

Full Name
Downlink receive quality Value P
Abbreviated Name
hoDlQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
by the downlink receiving quality.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
hoDlQualN
HoDlQualP<=HoDlQualN
Parameters
Value Type
long
2-1078
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.28 Downlink receive quality Value N

Full Name
Downlink receive quality Value N
Abbreviated Name
hoDlQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

caused by the downlink receiving quality.
2-1079
SJ-20140527134815-013|2015-03-10(R1.1)

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
hoDlQualP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.29 Uplink receive level of intra-ho Value P

2-1080
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Uplink receive level of intra-ho Value P
Abbreviated Name
intraHoUlLevP
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too small, the handover occurs frequently
because the conditions for making handover decision are fulfilled

easily.
If this parameter is set too large, the conditions for making handover
decision are difficult to be fulfilled.
2-1081
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is set to 2 to ensure a rapid and correct handover.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.30 Uplink receive level of intra-ho Value N

Full Name
Uplink receive level of intra-ho Value N
Abbreviated Name
intraHoUlLevN
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2-1082
SJ-20140527134815-013|2015-03-10(R1.1)
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.31 Downlink receive level of intra-ho Value P

Full Name
Downlink receive level of intra-ho Value P
Abbreviated Name
intraHoDlLevP
Managed Object
3GPP Name
N1..N8,P1..P8
2-1083
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

Downlink co-channel interference is one of the reasons for handover.
For the N averages of the recent downlink receiving level values, if
P averages of them are greater than the threshold and the downlink
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

easily.
Reason
Change take effect
No
2-1084
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.32 Downlink receive level of intra-ho Value N

Full Name
Downlink receive level of intra-ho Value N
Abbreviated Name
intraHoDlLevN
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description

Downlink co-channel interference is one of the reasons for handover.
For the N averages of the recent downlink receiving level values, if
P averages of them are greater than the threshold and the downlink
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1085
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.33 Distance handover Value P

Full Name
Distance handover Value P
Abbreviated Name
distanceP
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description
In accordance with GSM specifications, a TCH handover decision

can be made after the required average values are acquired.
2-1086
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
distanceN
The parameter value should be smaller than or equal to DistanceN.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

easily.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.34 Distance handover Value N

Full Name
Distance handover Value N
Abbreviated Name
distanceN
Managed Object
2-1087
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description
In accordance with GSM specifications, a TCH handover decision

can be made after the required average values are acquired.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
distanceP
The parameter value should be greater than or equal to DistanceP.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1088
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.35 PBGT handover Value P

Full Name
PBGT handover Value P
Abbreviated Name
pbgtHoP
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description
This parameter indicates the P value for PBGT handover. In the

process of a PBGT handover, if P out of N PBGT values satisfies
the handover decision condition, the PBGT handover condition is
fulfilled.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, modification of this parameter may change the number
of handover attempts and executions. A too large value does not

trigger a handover easily and tends to cause call drop.
Based on the on-site experience, the default value is set to [3,2],
Reason
which makes a proper number of handover times after the handover

decision is made.
Change take effect
No
0
2-1089
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.36 PBGT handover Value N

Full Name
PBGT handover Value N
Abbreviated Name
pbgtHoN
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description
This parameter indicates the N value for PBGT handover. In the

process of a PBGT handover, if P out of N PBGT values satisfies
the handover decision condition, the PBGT handover condition is
fulfilled.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, modification of this parameter may change the number
of handover attempts and executions. A too large value does not

trigger a handover easily and tends to cause call drop.
2-1090
SJ-20140527134815-013|2015-03-10(R1.1)
Reason

decision is made.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.37 Allow intra-Cell handover attempt due to uplink

interference(High Speed)
Full Name
Allow intra-Cell handover attempt due to uplink interference(High

Speed)
Abbreviated Name
hoControlIntfUl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an intra-cell handover

caused by uplink interference at high speed. The handover due
to uplink interference is triggered when the uplink level is high but
signal quality is poor.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
2-1091
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In the frequency-hopping network, it is recommended to disable the
intra-cell handover for the single-carrier cell. In other cases, it is

recommended to enable the intra-cell handover if strong interference
exists in some carriers of the cell, so as to improve the voice quality.
Intra-cell handover is not used in most of the networks.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.38 Allow intra-Cell handover attempt due to downlink

Full Name
Allow intra-Cell handover attempt due to downlink interference(High

Speed)
Abbreviated Name
hoControlIntfDl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1092
SJ-20140527134815-013|2015-03-10(R1.1)
Description

caused by uplink interference at high speed. The handover due to
downlink interference is triggered when the downlink level is high
but signal quality is poor.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.39 Allow handover due to distance(High Speed)

2-1093
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Allow handover due to distance(High Speed)
Abbreviated Name
hoControlDistance_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a handover caused by

distance at high speed. The TA value increases when an MS is
beyond the cell, and this handover is triggered when the TA value
reaches its threshold.
The value is the 3rd bit of the HoControl parameter of type DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is not recommended to enable this function unless specially
required.
Generally, handovers due to signal quality, receiving level, or PBGT
Reason
are used. These handover can cover most of application scenarios,

so the handover due to distance is disabled by default.
Change take effect
No
Access
Read/Write
OMC Access path

2-1094
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.40 Allow standard PBGT handover(High Speed)

Full Name
Allow standard PBGT handover(High Speed)
Abbreviated Name
hoControlPbgt_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a standard PBGT

handover at high speed. Through PBGT handover, an MS can be
handed over to the cell with better quality.
The value is the 4th bit of the HoControl parameter of type DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is enabled in the single-layer or single-band network.
For the multi-layer or multi-band network, this parameter is disabled

for controlling the traffic.
PBGT handover is the most commonly used handover. Through
Reason
PBGT handover, an MS can be handed over to the cell with better

quality, so as to keep good radio quality.
Change take effect
2-1095
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.24.41 Allow automatic handover due to traffic(High Speed)

Full Name
Allow automatic handover due to traffic(High Speed)
Abbreviated Name
hoControlLoad_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a traffic-based handover

at high speed. To balance the traffic load, the traffic load in a
busy cell can be partially transferred to an idle cell through the
traffic-based handover.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1096
SJ-20140527134815-013|2015-03-10(R1.1)
If traffic balance is used in a dense urban cell, it is recommended
to enable the traffic-based handover, and meanwhile enable the

dynamic cell priority.
In most of the cells, the traffic load is not too high, so this parameter
Reason
is disabled by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.42 Allow intra-cell handover in super TRX channel due to

downlink interference(High Speed)
Full Name
Allow intra-cell handover in super TRX channel due to downlink

Abbreviated Name
hoControlIntfUlSTrx_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an intra-cell handover in

super TRX channel due to downlink interference at high speed. The
super TRX refers to the TRX in the inner cell of a concentric cell.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
0
2-1097
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is not used in this version.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

uplink interference(High Speed)
Full Name
Allow intra-cell handover in super TRX channel due to uplink

Abbreviated Name
hoControlIntfDlSTrx_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow intra-cell handover in

super TRX channel due to uplink interference at high speed. The
super TRX refers to the TRX in the inner cell of a concentric cell.
2-1098
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.44 Allow adjacent cells handover in super TRX channel due

to PBGT(High Speed)
Full Name
Allow adjacent cells handover in super TRX channel due to

PBGT(High Speed)
Abbreviated Name
hoControlPbgtSTrx_H
Managed Object
2-1099
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a handover between

adjacent sectors in super TRX channel due to PBGT at high speed.
The super TRX refers to the TRX in the inner cell of a concentric cell.
The value is the 10th bit of the HoControl parameter of type
DWORD.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1100
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.45 Allow rapid handover(High Speed)

Full Name
Allow rapid handover(High Speed)
Abbreviated Name
hoControlRapidLevUl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a fast handover due to fast

fading of the uplink receiving level at high speed. The uplink level
fast handover is triggered by fast fading of the uplink receiving level.
DWORD.
Instance
Cell
Related FG
ZGO-02-02-006 Handover Based on Uplink Level Fast Fading
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This handover is generally used in scenarios when the uplink level
fades rapidly due to topographical reasons. It can rapidly transfer

subscribers to the target cell and avoid call drop.
This handover is only applicable to special scenarios.
Reason
Change take effect
No
Access
Read/Write
2-1101
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.24.46 Allow Macro-Micro delay handover(High Speed)

Full Name
Allow Macro-Micro delay handover(High Speed)
Abbreviated Name
hoControlMacroMicro_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a macro-to-micro

handover at high speed. The macro-to-micro handover refers to
a handover from the upper-layer cell to the lower-layer cell, and
it is triggered when the micro-cell signal level is greater than the
threshold for a certain time.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1102
SJ-20140527134815-013|2015-03-10(R1.1)
Macro-to-micro handover is used for traffic sharing in dual-layer or
multi-layer networks, mainly dual-band networks in the urban area.

Enabling macro-to-micro handover can relieve congestion, but may
affect the coverage.
Macro-to-micro handover is used in only layered networks.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.47 Allow Micro-Micro delay handover(High Speed)

Full Name
Allow Micro-Micro delay handover(High Speed)
Abbreviated Name
hoControlMicroMicro_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a micro-to-micro delay

handover at high speed.
DWORD.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
2-1103
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.48 Allow force transfer handover(High Speed)

Full Name
Allow force transfer handover(High Speed)
Abbreviated Name
hoControlForceMove_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a forced transfer handover

at high speed. The forced transfer handover is usually used when
the traffic is transferred from a 900M cell to the co-site 1800M cell.
DWORD.
Instance
Cell
Related FG
ZGO-02-02-003 Directed-Shift Handover

2-1104
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Generally this parameter is disabled.
When the 1800M network and 900M network are co-site, the traffic
in the 1800M network is transferred to the 900M network for traffic
load sharing even if the signal quality in the 1800M network is not
as good as that in the 900M network. In this case, the traffic is
transferred forcibly.
The forced transfer handover is only used in special scenarios.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.49 Allow quality handover in uplink(High Speed)

Full Name
Allow quality handover in uplink(High Speed)
Abbreviated Name
hoControlQualUl_H
Managed Object
2-1105
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an uplink quality handover

at high speed.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to Yes by default. If the operator requests
to disable this parameter, you should make a decision based on

careful research.
This handover is most commonly used and should be enabled
Reason
normally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1106
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.50 Allow level handover in uplink(High Speed)

Full Name
Allow level handover in uplink(High Speed)
Abbreviated Name
hoControlLevUl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an uplink level handover

at high speed.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to Yes by default. If the operator does not
allow the level handover, this parameter can be disabled.
Reason
normally.
Change take effect
No
Access
Read/Write
2-1107
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.24.51 Allow quality handover in downlink(High Speed)

Full Name
Allow quality handover in downlink(High Speed)
Abbreviated Name
hoControlQualDl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow the downlink quality

handover at high speed.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

careful research.
Reason
normally.
2-1108
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.52 Allow level handover in downlink(High Speed)

Full Name
Allow level handover in downlink(High Speed)
Abbreviated Name
hoControlLevDl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a downlink level handover

at high speed.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1109
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
Yes
Reason
normally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.53 Allow downlink rapid handover(High Speed)

Full Name
Allow downlink rapid handover(High Speed)
Abbreviated Name
hoControlRapidNLevDl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a downlink fast handover

at high speed. The downlink fast handover is a handover algorithm
designed for the high-speed railway scenario. The fast handover,
aiming to rapidly hand over the MS in high-speed movement to the
neighbor cells, is triggered by the neighbor cell receiving level.
DWORD.
Instance
Cell
Related FG
ZGO-02-02-018 Fast Handover Based on Downlink Level
0: No
1: Yes
Unit
N/A
2-1110
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The fast handover is mainly applicable to the high-speed railway
scenario. In this handover algorithm, the coverage of sites along the

railway should be in chain distribution, and the neighbor cells have
well-overlapped coverage. By configuring the neighbor cells with the
directive attribute, you can shorten the time for making a handover
decision and improve the handover success rate.
This parameter is enabled in the high-speed railway scenario, and
Reason
disabled in other scenarios.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.54 Allow C/I limited handover(High Speed)

Full Name
Allow C/I limited handover(High Speed)
Abbreviated Name
hoControlCINCell_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1111
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether to support the handover to the

C/I constraint neighbor cell at high speed. Suppose A is a serving
cell. B and C are neighbor cells of A. Then B is a C/I constraint
neighbor cell of C. If both B and C meet the handover conditions
and C/I threshold crossing occurs, the handover is limited to the
neighbor cell B.
DWORD.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In an intersection area, this parameter is enabled to some cells to
avoid handover to the over-covered cell. This parameter is disabled

generally.
This parameter is enabled when the C/I constraint cell is rarely used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1112
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.55 Allow downlink quality rapid handover(High Speed)

Full Name
Allow downlink quality rapid handover(High Speed)
Abbreviated Name
hoControlRadpidQDl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
A call drop may occur due to poor downlink quality after an MS

starts a call or is handed over to a cell in which serious interference
exists on some spots. A fast handover algorithm is provided for
decision-making of rescue handovers in high-speed scenarios.
This algorithm uses the raw measurement data of downlink quality,
applies no window for neighbor cells, and shares the N value used
for other handover decisions. The fast handover due to downlink
quality has the lowest priority than the other supported handover
types.
This parameter indicates whether to allow a fast handover due to
poor downlink quality.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Enable this function when the downlink quality of the cell is poor
and strong interference exists.
Only cells with poor downlink quality need to enable this function.
Reason
2-1113
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A

interference(Middle Speed)
Full Name
Allow intra-Cell handover attempt due to uplink interference(Middle

Speed)
Abbreviated Name
hoControlIntfUl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

caused by uplink interference at intermediate speed. The handover
due to uplink interference is triggered when the uplink level is high
but signal quality is poor.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1114
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Allow intra-Cell handover attempt due to downlink

Abbreviated Name
hoControlIntfDl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

caused by downlink interference at intermediate speed. The
handover due to downlink interference is triggered when the
downlink level is high but signal quality is poor.
Instance
Cell
Related FG

2-1115
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.58 Allow handover due to distance(Middle Speed)

Full Name
Allow handover due to distance(Middle Speed)
Abbreviated Name
hoControlDistance_M
Managed Object
3GPP Name
N/A
2-1116
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

distance at intermediate speed. The TA value increases when an
MS is beyond the cell, and this handover is triggered when the TA
value reaches its threshold.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
required.
Generally, handover due to signal quality, receiving level, or PBGT
Reason
are used. These handover can cover most of application scenarios,

so the handover due to distance is disabled by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1117
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.59 Allow standard PBGT handover(Middle Speed)

Full Name
Allow standard PBGT handover(Middle Speed)
Abbreviated Name
hoControlPbgt_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

handover at intermediate speed. Through PBGT handover, an MS
can be handed over to the cell with better quality.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason

Change take effect
No
Access
Read/Write
2-1118
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.100/V6.30.100
N/A
2.24.60 Allow automatic handover due to traffic(Middle Speed)

Full Name
Allow automatic handover due to traffic(Middle Speed)
Abbreviated Name
hoControlLoad_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a traffic-based handover

at intermediate speed. To balance the traffic load, the traffic load in
a busy cell can be partially transferred to an idle cell through the
traffic-based handover.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If traffic balance is used in a dense urban cell, it is recommended
to enable the traffic-based handover, and meanwhile enable the

dynamic cell priority.
In most of the cells, the traffic load is not too high, so this parameter
Reason
is disabled by default.
2-1119
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A

downlink interference(Middle Speed)
Full Name

Abbreviated Name
hoControlIntfUlSTrx_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

super TRX channel due to downlink interference at intermediate
speed. The super TRX refers to the TRX in the inner cell of a
concentric cell.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1120
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

uplink interference(Middle Speed)
Full Name

Abbreviated Name
hoControlIntfDlSTrx_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

super TRX channel due to uplink interference at intermediate speed.
The super TRX refers to the TRX in the inner cell of a concentric cell.
Instance
Cell
Related FG
N/A
0: No
1: Yes
2-1121
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

to PBGT(Middle Speed)
Full Name

PBGT(Middle Speed)
Abbreviated Name
hoControlPbgtSTrx_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1122
SJ-20140527134815-013|2015-03-10(R1.1)
Description

adjacent sectors in super TRX channel due to PBGT at intermediate
speed. The super TRX refers to the TRX in the inner cell of a
concentric cell.
DWORD.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.64 Allow rapid handover(Middle Speed)

2-1123
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Allow rapid handover(Middle Speed)
Abbreviated Name
hoControlRapidLevUl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

fast fading of the uplink receiving level at intermediate speed. The
uplink level fast handover is triggered by fast fading of the uplink
receiving level.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The uplink fast fading handover is mainly applicable to the scenarios
of fast fading due to MS fast and directive moving or obstacles.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1124
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.65 Allow Macro-Micro delay handover(Middle Speed)

Full Name
Allow Macro-Micro delay handover(Middle Speed)
Abbreviated Name
hoControlMacroMicro_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a macro-to-micro

handover at intermediate speed. The macro-to-micro handover
refers to a handover from the upper-layer cell to the lower-layer cell,
and it is triggered when the micro-cell signal level is greater than
the threshold for a certain time.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

2-1125
SJ-20140527134815-013|2015-03-10(R1.1)
Macro-to-micro handover is used in only layered networks.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.66 Allow Micro-Micro delay handover(Middle Speed)

Full Name
Allow Micro-Micro delay handover(Middle Speed)
Abbreviated Name
hoControlMicroMicro_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

handover at intermediate speed. This parameter is not available
because the handover between micro-cells can be regarded as the
same-layer handover that is implemented as the PBGT handover.
DWORD.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1126
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.67 Allow force transfer handover(Middle Speed)

Full Name
Allow force transfer handover(Middle Speed)
Abbreviated Name
hoControlForceMove_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a forced transfer handover

at high speed. The forced transfer handover is usually used when
the traffic is transferred from a 900M cell to the co-site 1800M cell.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
2-1127
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
When the 1800M network and 900M network are co-site, the traffic

Reason
Generally, it is disabled by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.68 Allow quality handover in uplink(Middle Speed)

Full Name
Allow quality handover in uplink(Middle Speed)
Abbreviated Name
hoControlQualUl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1128
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether to allow the uplink quality

handover at intermediate speed.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

careful research.
Reason
normally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.69 Allow level handover in uplink(Middle Speed)

Full Name
Allow level handover in uplink(Middle Speed)

2-1129
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
hoControlLevUl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an uplink level handover

at intermediate speed.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
normally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1130
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.70 Allow quality handover in downlink(Middle Speed)

Full Name
Allow quality handover in downlink(Middle Speed)
Abbreviated Name
hoControlQualDl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a downlink quality

handover at intermediate speed.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

careful research.
Reason
normally.
Change take effect
No
Access
Read/Write
2-1131
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.24.71 Allow level handover in downlink(Middle Speed)

Full Name
Allow level handover in downlink(Middle Speed)
Abbreviated Name
hoControlLevDl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a downlink level handover

DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
normally.
Change take effect
2-1132
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.24.72 Allow downlink rapid handover(Middle Speed)

Full Name
Allow downlink rapid handover(Middle Speed)
Abbreviated Name
hoControlRapidNLevDl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a downlink fast handover

DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1133
SJ-20140527134815-013|2015-03-10(R1.1)

railway should be in chain distribution, and the neighbor cells have
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.73 Allow C/I limited handover(Middle Speed)

Full Name
Allow C/I limited handover(Middle Speed)
Abbreviated Name
hoControlCINCell_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

C/I constraint neighbor cell at intermediate speed. Suppose A is
a serving cell. B and C are neighbor cells of A. Then B is a C/I
constraint neighbor cell of C. If both B and C meet the handover
conditions and C/I threshold crossing occurs, the handover is limited
to the neighbor cell B.
DWORD.
Instance
Cell
2-1134
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In an intersection area, this parameter is enabled to some cells to
avoid handover to the over-covered cell. This parameter is disabled

generally.
Reason
(Off)".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.74 Allow downlink quality rapid handover(Middle Speed)

Full Name
Allow downlink quality rapid handover(Middle Speed)
Abbreviated Name
hoControlRadpidQDl_M
Managed Object
3GPP Name
N/A
2-1135
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

decision-making of rescue handovers in middle-speed scenarios.
types.
poor downlink quality.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1136
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

interference(Low Speed)
Full Name
Allow intra-Cell handover attempt due to uplink interference(Low

Speed)
Abbreviated Name
hoControlIntfUl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an intra-cell TCH

handover caused by uplink interference.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

This parameter is enabled to reduce the uplink interference in a cell.
Reason
Change take effect
2-1137
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A

Full Name
Allow intra-Cell handover attempt due to downlink interference(Low

Speed)
Abbreviated Name
hoControlIntfDl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an intra-cell TCH

handover caused by downlink interference.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1138
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
normally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.77 Allow handover due to distance(Low Speed)

Full Name
Allow handover due to distance(Low Speed)
Abbreviated Name
hoControlDistance_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

distance.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
2-1139
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
required.
Reason
(Off)".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.78 Allow standard PBGT handover(Low Speed)

Full Name
Allow standard PBGT handover(Low Speed)
Abbreviated Name
hoControlPbgt_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

handover at low speed. Through PBGT handover, an MS can be
handed over to the cell with better quality.
Instance
Cell
Related FG
2-1140
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes


Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.24.79 Allow automatic handover due to traffic(Low Speed)

Full Name
Allow automatic handover due to traffic(Low Speed)
Abbreviated Name
hoControlLoad_L
Managed Object
3GPP Name
N/A
2-1141
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates whether to allow an automatic TCH

handover based on traffic.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If traffic balance is used in a dense urban area, it is recommended
to enable the traffic-based handover and dynamic cell priority.
Normally, the traffic load of a cell is not too high, so this parameter is
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

downlink interference(Low Speed)
2-1142
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name

Abbreviated Name
hoControlIntfUlSTrx_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

a super TRX channel due to downlink interference. The super TRX
refers to the TRX in the inner cell of a concentric cell.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1143
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

uplink interference(Low Speed)
Full Name

Abbreviated Name
hoControlIntfDlSTrx_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

a super TRX channel due to uplink interference. The super TRX
refers to the TRX in the inner cell of a concentric cell.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
2-1144
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A

to PBGT(Low Speed)
Full Name

PBGT(Low Speed)
Abbreviated Name
hoControlPbgtSTrx_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

adjacent sectors in a super TRX channel due to PBGT. The super
TRX refers to the TRX in the inner cell of a concentric cell.
DWORD.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1145
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.83 Allow dynamic adjustment of handover priority

Full Name
Allow dynamic adjustment of handover priority
Abbreviated Name
hoControlPrioChg
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow dynamic adjustment of

handover priority. If dynamic adjustment of handover priority is
allowed, the handover target cells with lower loads have higher
priorities and those with higher loads have lower priorities.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
2-1146
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is recommended to enable dynamic adjustment of handover
priority for networks with high handover congestion.
Dynamic adjustment of handover priority is an optional function.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.84 Allow rapid handover(Low Speed)

Full Name
Allow rapid handover(Low Speed)
Abbreviated Name
hoControlRapidLevUl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

fast fading of the uplink received level at a low speed.
DWORD.
Instance
Cell
Related FG
2-1147
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This handover is generally used in scenarios where the uplink level
fades fast due to topographical reasons. It can rapidly transfer

subscribers to the target cell and avoid call drop.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.85 Allow Macro-Micro delay handover(Low Speed)

Full Name
Allow Macro-Micro delay handover(Low Speed)
Abbreviated Name
hoControlMacroMicro_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1148
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether to allow a macro-to-micro delay

handover.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Macro-to-micro handover is used in layered networks only.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.86 Allow Micro-Micro delay handover(Low Speed)

2-1149
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Allow Micro-Micro delay handover(Low Speed)
Abbreviated Name
hoControlMicroMicro_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

handover.
DWORD.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1150
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.87 Allow force transfer handover(Low Speed)

Full Name
Allow force transfer handover(Low Speed)
Abbreviated Name
hoControlForceMove_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a forced transfer

handover. The forced transfer handover is usually used when the
traffic is transferred from a 900M cell to the co-sited 1800M cell.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Generally this parameter is disabled.
When the 1800M network and 900M network are co-sited, the traffic
Reason
2-1151
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.88 Allow quality handover in uplink(Low Speed)

Full Name
Allow quality handover in uplink(Low Speed)
Abbreviated Name
hoControlQualUl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an uplink quality

handover.
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1152
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
Yes
to disable this parameter, a careful analysis should be conducted

before a decision.
Reason
normally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.89 Allow level handover in uplink(Low Speed)

Full Name
Allow level handover in uplink(Low Speed)
Abbreviated Name
hoControlLevUl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an uplink level handover.

DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
2-1153
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
normally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.90 Allow quality handover in downlink(Low Speed)

Full Name
Allow quality handover in downlink(Low Speed)
Abbreviated Name
hoControlQualDl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a downlink quality

handover.
The value is the 21st bit of the HoControl parameter of type DWORD.
Instance
Cell
Related FG
2-1154
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
to disable this parameter, a careful analysis should be conducted

before a decision.
Reason
normally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.91 Allow level handover in downlink(Low Speed)

Full Name
Allow level handover in downlink(Low Speed)
Abbreviated Name
hoControlLevDl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1155
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether to allow a downlink level handover.

The value is the 22nd bit of the HoControl parameter of type
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
normally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.92 Allow downlink rapid handover(Low Speed)

Full Name
Allow downlink rapid handover(Low Speed)
Abbreviated Name
hoControlRapidNLevDl_L
2-1156
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a downlink fast handover.

The value is the 23rd bit of the HoControl parameter of type
DWORD.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

railway should be in chain distribution, and the neighbor cell has
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1157
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.93 Allow C/I limited handover(Low Speed)

Full Name
Allow C/I limited handover(Low Speed)
Abbreviated Name
hoControlCINCell_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

C/I constraint neighbor cell. Suppose A is a serving cell. B and C
are neighbor cells of A. Then B is a C/I constraint neighbor cell of
C. If both B and C meet the handover conditions and C/I threshold
crossing occurs, the handover is limited to the neighbor cell B.
DWORD.
Instance
Cell
Related FG
ZGO-02-02-021 Handover Based on Neigboring Cells Level Ratio
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In an intersection area, this parameter is enabled for some cells to
avoid handovers to an over-covered cell. This parameter is disabled

generally.
Reason
2-1158
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.94 Allow downlink quality rapid handover(Low Speed)

Full Name
Allow downlink quality rapid handover(Low Speed)
Abbreviated Name
hoControlRadpidQDl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

types.
downlink quality.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
0
2-1159
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.95 Synchronism
Full Name
Synchronism
Abbreviated Name
hoSyncInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether synchronous handovers to a cell

are allowed.
If the BSC detects that the timing advance of the cell (target cell)
is equal to that of the source cell, synchronous handovers to the
cell are allowed.
Instance
Cell
2-1160
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Use the default value because synchronous handover is used in
common networks.
Synchronous handovers are used in common networks generally.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.96 Asynchronism
Full Name
Asynchronism
Abbreviated Name
hoNSyncInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1161
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether asynchronous handovers to a

cell are allowed.
If the BSC fails to obtain the timing advance of the cell (target cell),
only asynchronous handovers to the cell are allowed.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Use the default value because asynchronous handover is used in
common networks.
Asynchronous handovers are used in common networks generally.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.97 Pseudo-synchronism
Full Name
Pseudo-synchronism
Abbreviated Name
hoFSyncInd
2-1162
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether pseudo-synchronous handover

to a cell is allowed.
If an MS can calculate the timing advance of the cell (target
cell) and the MS supports pseudo-synchronous handover,
pseudo-synchronous handover to the cell is allowed.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
This parameter is not supported currently and is disabled.
This parameter is configured based on the actual case.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1163
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.98 Pre-synchronism
Full Name
Pre-synchronism
Abbreviated Name
hoPSyncInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether pre-synchronous handover to a

cell is allowed.
If the BSC obtains the timing advance of the cell (target cell) and
considers the timing advance when sending a handover command,
pre-synchronous handover to the cell is allowed.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Use the default value. This function is not supported in this version.
Reason
Change take effect
No
Access
Read/Write
2-1164
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.24.99 Prior layer selecting parameter on signal level/quality

Full Name
Prior layer selecting parameter on signal level/quality
Abbreviated Name
layerPriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the signal level and signal quality handover conditions are
met, this parameter decides the priority to select and sequence the
candidate cells for handover. Three options are available:
First hand over to adjacent cells at the upper layer of the local cell,
then to those at the same layer, and finally to other adjacent cells.
First hand over to adjacent cells at the same layer of the local cell,
then to those at the upper layer, and finally to other adjacent cells.
All adjacent cells are treated in the same way.
This parameter determines which method is to be selected. During
the process of handover control due to level and quality, this
parameter has a higher priority than that of adjacent cells.
Value range:
1 (UPPER_LAYER): adjacent cell at upper layer first, the same layer
next, other adjacent cells finally;
2 (SAME_LAYER): adjacent cell at the same layer first, upper layer
next, other adjacent cells finally;
3 (ALL_LAYER): All adjacent cells are treated in the same way.
In general, micro cell uses option 1, meaning that due to signal
quality or strength reasons, the calls in a micro cell are handed
over to cells at the macro cell layer first. Macro cell uses option 2,
meaning that the due to signal quality or strength reasons, the calls
in a macro cell are handed over other macro cells first.
Instance
Cell
Related FG
2-1165
SJ-20140527134815-013|2015-03-10(R1.1)
1: UPPER_LAYER
2: SAME_LAYER
3: ALL_LAYER
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
This parameter is not used any longer. Use the default value.
This parameter is not used any longer. Use the default value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.100 Rapid handover Threshold

Full Name
Rapid handover Threshold
Abbreviated Name
rapidHoThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1166
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Some parameters are required during fast fading handover. The fast
handover threshold indicates signal strength. If the measured signal
strength of a call is consecutively less than this threshold, the fast
fading handover condition is fulfilled and the associated cells among
the neighbor cells are the candidates for the target cell.
The RapidHoThs parameter can be set to 15 (from 96 dBm to
95 dBm) by default, the same as the level threshold for ordinary
handover.
Instance
Cell
Related FG
0: <-110
1: -110~-109
2: -109~-108
3: -108~-107
4: -107~-106
5: -106~-105
6: -105~-104
7: -104~-103
8: -103~-102
9: -102~-101
10: -101~-100
11: -100~-99
12: -99~-98
13: -98~-97
14: -97~-96
15: -96~-95
16: -95~-94
17: -94~-93
18: -93~-92
19: -92~-91
20: -91~-90
21: -90~-89
22: -89~-88
23: -88~-87
24: -87~-86
25: -86~-85
26: -85~-84
27: -84~-83
28: -83~-82
29: -82~-81
30: -81~-80
31: -80~-79
32: -79~-78
33: -78~-77
2-1167
SJ-20140527134815-013|2015-03-10(R1.1)
34: -77~-76
35: -76~-75
36: -75~-74
37: -74~-73
38: -73~-72
39: -72~-71
40: -71~-70
41: -70~-69
42: -69~-68
43: -68~-67
44: -67~-66
45: -66~-65
46: -65~-64
47: -64~-63
48: -63~-62
49: -62~-61
50: -61~-60
51: -60~-59
52: -59~-58
53: -58~-57
54: -57~-56
55: -56~-55
56: -55~-54
57: -54~-53
58: -53~-52
59: -52~-51
60: -51~-50
61: -50~-49
62: -49~-48
63: >-48
Unit
dBm
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1168
SJ-20140527134815-013|2015-03-10(R1.1)
It is not necessary to set the handover threshold to a too high
value in case of fast handover because the MS can quickly move

to a location with a higher cell level. If the N value is too large, the
timeliness of the handover decision may be affected.
Based on the on-site experience, the default value is set to [10.2],
Reason
which leads to appropriate handover speed and timeliness.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.101 Rapid handover Value N

Full Name
Rapid handover Value N
Abbreviated Name
rapidHoN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Some parameters are required during fast fading handover.

The RapdiHoN parameter, a counter value, indicates the minimum
number of times that the measured signal strength of a call is
consecutively less than the threshold.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
2-1169
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is not necessary to set the handover threshold to a too high
value in case of fast handover because the MS can quickly move

to a location with a higher cell level. If the N value is too large, the
timeliness of the handover decision may be affected.
Based on the on-site experience, the default value is set to [10.2],
Reason
which leads to appropriate handover speed and timeliness.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.102 Handover to same layer other band neighbour cell for

PBGT permitted
Full Name
Handover to same layer other band neighbour cell for PBGT

permitted
Abbreviated Name
pbgtHoLayerSame
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether it is allowed to perform PBGT

handover to an adjacent cell at the same layer but with different
frequency band.
2-1170
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
PBGT handover is used between cells on the same layer so that
an MS can select a better cell.
Normally, PBGT handover is used between cells on the same layer.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.103 Handover to neighbour cell with no Layer Relation for

PBGT permitted
Full Name
Handover to neighbour cell with no Layer Relation for PBGT

permitted
Abbreviated Name
pbgtHoLayerUndefine
Managed Object
2-1171
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether it is allowed to perform PBGT

handover to an adjacent cell with no layer relationship.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, if all cells that require PBGT handovers have a defined
layer, PBGT handovers to undefined layers can be disabled.
No layer relationship indicates that the MS does not use the layered
Reason
structure. In this case, PBGT handovers should be allowed.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.104 Handover to upper layer neighbour cell for PBGT permitted

Full Name
Handover to upper layer neighbour cell for PBGT permitted
Abbreviated Name
pbgtHoLayerUp
2-1172
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow the PBGT handover to

the upper-layer adjacent cell.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, PBGT handovers to a neighbor cell on the upper layer
are not allowed. Disabling this handover facilitates traffic sharing in

special scenarios and helps relieve congestion, but may affect the
call drop rate and coverage.
The default value helps the lower layer to take over traffic.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1173
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.105 Handover to under layer neighbor cell for PBGT permitted

Full Name
Handover to under layer neighbor cell for PBGT permitted
Abbreviated Name
pbgtHoLayerLow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow the PBGT handover to

the lower-layer adjacent cell.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, in a layered network, PBGT handovers to a neighbor
cell on the lower layer are allowed. Disabling this handover may
increase the congestion rate in special scenarios.
Layered structure is not set for common networks. The value is
Reason
No by default.
Change take effect
No
Access
Read/Write
OMC Access path

2-1174
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.106 Penalty time for handover failure

Full Name
Penalty time for handover failure
Abbreviated Name
hoFailPenalTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the penalty time for the target cell if an MS
fails to be handed over to the target cell or the channel allocation
fails. During the penalty time, this parameter is used to perform
an offset on the level of this cell. This parameter determines the
penalty duration.
Instance
Cell
Related FG
1..255
Unit
N/A
Default Value
14
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is based on the assumption that there is a
preprocessed value. If no preprocessed value is available, use a

larger value.
The default value is based on the preprocessed value. If the
Reason
preprocessed value is 0, the penalty time is about 7 seconds, which

is enough for the change of the radio environment.
Change take effect
No
2-1175
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.107 Difference of dynamic priority

Full Name
Difference of dynamic priority
Abbreviated Name
dynPrioOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the tolerable difference of dynamic

handover priority.
For example, during a handover, the dynamic handover priority of
cell A is higher than that of cell B. If cell B is in the MS's moving
direction or considering the traffic and threshold, the MS is handed
over to cell B on condition that the difference between the two cells
handover priorities is within the tolerable difference.
Instance
Cell
Related FG
1..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1176
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter affects the sequence of candidate cells. A larger
value indicates that the change on the priority order of two cells
requires a larger difference between the dynamic priorities of the
two cells.
This parameter is used to sort the neighbor cells for handover.
Reason
A smaller value indicates that cells with better signals are more
probable to have a higher priority. It is recommended to use the
default value 1.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.108 PBGT difference

Full Name
PBGT difference
Abbreviated Name
pbgtOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the tolerable PBGT difference. For

example, during a handover, cell As PBGT is higher than that of the
cell B but cell B is in MS's moving direction. The MS is handed over
to cell B if the difference between the two cells PBGTs is within
the tolerable difference.
Instance
Cell
Related FG
0..20
Unit
dB
2-1177
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter affects the sequence of candidate cells. A larger
value indicates that the change on the priority order of two cells
requires a larger PBGT difference between the two cells.
This parameter is used to sort the neighbor cells for handover.
Reason
A smaller value indicates that cells with better signals are more
probable to have a higher priority. It is recommended to use the
default value 3.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.109 Same layer permitted on traffic HO

Full Name
Same layer permitted on traffic HO
Abbreviated Name
TrafficHoLayerCtl_0
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a neighbor cell on the same layer

can be considered as a target cell during a traffic handover.
2-1178
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To better relieve congestion, select the target layer of the traffic
handover based on the layer setting of the actual network.
Traffic handover normally occurs at the same layer or the lower
Reason
layer to save resources at the upper layer.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.110 Upper layer permitted on traffic HO

Full Name
Upper layer permitted on traffic HO
Abbreviated Name
TrafficHoLayerCtl_1
Managed Object
3GPP Name
N/A
2-1179
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates whether a neighbor cell on the upper layer

can be considered as a target cell during traffic handover.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.111 Lower layer permitted on traffic HO

Full Name
Lower layer permitted on traffic HO
Abbreviated Name
TrafficHoLayerCtl_2
2-1180
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a neighbor cell on the lower layer

can be considered as a target cell during traffic handover.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1181
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.112 Undefined layer permitted on traffic HO

Full Name
Undefined layer permitted on traffic HO
Abbreviated Name
TrafficHoLayerCtl_3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a neighbor cell on an unknown

layer can be considered as a target cell during traffic handover.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
layer to save resources at the upper layer. The undefined layed is

applied to the non-hierarchical network
and can be set as the target cell of traffic handover as required.
Change take effect
No
Access
Read/Write
2-1182
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.24.113 GSM900 frequency band P-GSM

Full Name
GSM900 frequency band P-GSM

Abbreviated Name
TrafficHoFreqCtl_0
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow the basic GSM9000

frequency-band (P-GSM) (ARFCN = 1 - 124)
adjacent cell to be used as the target cell to which traffic handover is
performed.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To better relieve congestion, select the target frequency band of the
traffic handover based on the frequency used in the actual network.
2-1183
SJ-20140527134815-013|2015-03-10(R1.1)
In most cases, GSM900 cells are considered as target cells during
Reason
a traffic handover.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.114 EXT900 frequency band E-GSM permitted on traffic HO

Full Name
EXT900 frequency band E-GSM permitted on traffic HO
Abbreviated Name
TrafficHoFreqCtl_1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow the basic GSM9000

frequency-band E-GSM (ARFCN = 0 - 124, 975 - 1023)
performed.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1184
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
In few cases, E-GSM cells are considered as target cells during
Reason
a traffic handover.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.115 DCS1800 frequency band permitted on traffic HO

Full Name
DCS1800 frequency band permitted on traffic HO
Abbreviated Name
TrafficHoFreqCtl_2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow the DCS1800

frequency-band DCS1800 (ARFCN = 512 - 885)
performed.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
2-1185
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In few cases, DCS1800 cells are considered as target cells during
Reason
a traffic handover.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.116 PCS1900 frequency band permitted on traffic HO

Full Name
PCS1900 frequency band permitted on traffic HO
Abbreviated Name
TrafficHoFreqCtl_4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow the PCS1900

frequency-band (PCS1900) (ARFCN = 512 - 810)
performed.
2-1186
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In few cases, GSM1900 cells are considered as target cells during
Reason
a traffic handover.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.117 GSM850 frequency band permitted on traffic HO

Full Name
GSM850 frequency band permitted on traffic HO
Abbreviated Name
TrafficHoFreqCtl_5
Managed Object
3GPP Name
N/A
2-1187
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates whether to allow the GSM850

frequency-band (ARFCN = 128 - 251)
performed.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In few cases, GSM850 cells are considered as target cells during
Reason
a traffic handover.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.118 Threshold of traffic for handover

Full Name
Threshold of traffic for handover

2-1188
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
trafficThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
If the TCH occupation rate of a cell is greater than this parameter

value (number of occupied TCH channels / total number of TCH
channels, including static TCH channels and dynamic channels
serving as TCH channels, excluding blocked idle channels), then
the cell is considered too busy, and a traffic handover is triggered
for the cell.
Instance
Cell
Related FG
0..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To avoid channel congestion caused by burst traffic, set this
parameter to a small value for cells with only a few channels.
In a cell with medium number of channels, the value 80% indicates
Reason
that a large proportion of channels are occupied and a few

channels are available. In this case, it is appropriate to start
congestion control. The parameter value cannot be lower than
TargetCellTrafficThs. Otherwise, pingpang handover of traffic may
be caused.
Change take effect
No
Access
Read/Write
2-1189
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.119 Traffic handover threshold

Full Name
Traffic handover threshold
Abbreviated Name
trafficLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used for traffic handover. Different from the

original handover condition that adjacent cells level must be higher
than that of this cell, this threshold specifies the lowest difference
between the two levels. In this way, traffic handover can be improved
greatly. This threshold must be less than the PBGT threshold in
reverse direction. Otherwise, it may result in pingpang handovers.
Instance
Cell
Related FG
0..48
Unit
dB
Default Value
24
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1190
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter takes effect after automatic traffic-based handover
(HoControl6) is enabled. Use a higher value for compensation for

the PBGT handover in reverse direction of the target cell.
In the scenario with high traffic, a small value indicates that the
target Nclayer cell or frequency cell has a stronger capability on
handling traffic and outgoing handover of the traffic is easier (on
condition that the traffic threshold is met). It helps reduce the
probability of TCH congestion in the cell.
The default value is set to balance traffic to ensure that the level of
Reason
the target cell is not lower than that of the serving cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.120 Level offset during penalty

Full Name
Level offset during penalty
Abbreviated Name
penaltyLevOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the offset on the downlink level of this cell
in the penalty period.
Instance
Cell
Related FG
0..63
Unit
dB
Default Value
15
2-1191
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The system allows three consecutive handover failures to a target
cell. During the second and third handover decisions, a manual

level offset is applied on the cell to which the first handover fails
to reduce its level. If this cell still has a higher priority than other
neighbor cells, the system precedes initiating a handover to this cell.
If the handover to this cell fails for three times, the system shields
this cell in the handover failure penalty period.
A penalty of 15 dB is enough to prevent the cell from incoming
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.121 Uplink interference quality offset

Full Name
Uplink interference quality offset
Abbreviated Name
qOffSetUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1192
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates that the relationship between the level

and quality determines whether a channel is interfered during an
When IntraHoUlLevP out of IntraHoUlLevN measurements satisfy
rxqual-ulFQSS (RXLEV_UL+SOffSetUl), the handover condition is
met. Where, rxqual-ul is the uplink quality, QOffSetUL is the uplink
quality offset, AvRxlevUL(n) is the uplink level, SOffSetUL is the
uplink level offset, and FQSS is the current quality offset determined
by the level and the corresponding uplink quality offset (SOffSetUl).
The algorithm is as follows:
255 AvRxlevUL(n) < SOffSetUL + 20
InterFQSS= | QOffSetUl + 2 SOffSetUL + 20 AvRxlevUL(n) <
SOffSetUL + 30
| QOffSetUl + 3 SOffSetUL + 30 AvRxlevUL(n) < SOffSetUL + 40
QOffSetUl + 4 SOffSetUL + 40 AvRxlevUL(n)
After interference is confirmed, services should inform the database
about the current channel occupation rate when applying to the
database for appropriate channels.
Instance
Cell
Related FG
0..20
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be set as required by the network. A larger
value indicates higher quality tolerance at the corresponding level

and a quality handover is more difficult to be initiated.
The default value is set based on the normal uplink interference
Reason
environment.
Change take effect
No
0
2-1193
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.122 Uplink interference level offset

Full Name
Uplink interference level offset
Abbreviated Name
sOffSetUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

When IntraHoUlLevP out of IntraHoUlLevN measurements satisfy
rxqual-ulFQSS (RXLEV_UL+SOffSetUl), the handover condition is
met. Where, rxqual-ul is the uplink quality, QOffSetUL is the uplink
quality offset, AvRxlevUL(n) is the uplink level, SOffSetUL is the
uplink level offset, and FQSS is the current quality offset determined
by the level and the corresponding uplink quality offset (SOffSetUl).
The algorithm is as follows:
255 AvRxlevUL(n) < SOffSetUL + 20
InterFQSS= | QOffSetUl + 2 SOffSetUL + 20 AvRxlevUL(n) <
SOffSetUL + 30
| QOffSetUl + 3 SOffSetUL + 30 AvRxlevUL(n) < SOffSetUL + 40
QOffSetUl + 4 SOffSetUL + 40 AvRxlevUL(n)
Instance
Cell
Related FG
0..20
Unit
N/A
Default Value
15
2-1194
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
value increases the level requirements of quality handovers and a

quality handover is more difficult to be initiated.
Reason
environment.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.123 Downlink interference quality offset

Full Name
Downlink interference quality offset
Abbreviated Name
qOffSetDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1195
SJ-20140527134815-013|2015-03-10(R1.1)
Description

When IntraHoUlLevP out of IntraHoDlLevN measurements satisfy
rxqual-dlFQSS (RXLEV_UL,SOffSetUl,QOffSetUL), the handover
condition is met. Where, rxqual-dl is the downlink quality, QOffSetDL
is the downlink quality offset, RXLEV_DL is the downlink level,
SOffSetDL is the downlink level offset, and FQSS is the current
quality offset determined by the level and the corresponding uplink
quality offset (SOffSetDl). The algorithm is as follows:
255 AvRxlevDL(n) < SOffSetDL + 20
InterFQSS= | QOffSetDl + 2 SOffSetDL + 20 AvRxlevDL(n) <
SOffSetDL + 30
| QOffSetDl + 3 SOffSetDL + 30 AvRxlevDL(n) < SOffSetDL + 40
QOffSetDl + 4 SOffSetDL + 40 AvRxlevDL(n)
Instance
Cell
Related FG
0..20
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
value indicates lower quality tolerance at the corresponding level

The default value is set based on the normal downlink interference
Reason
environment.
Change take effect
No
0
2-1196
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.124 Downlink interference level offset

Full Name
Downlink interference level offset
Abbreviated Name
sOffSetDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

When IntraHoUlLevP out of IntraHoDlLevN measurements satisfy
rxqual-dlFQSS (RXLEV_UL,SOffSetUl,QOffSetUL), the handover
condition is met. Where, rxqual-dl is the downlink quality, QOffSetDL
is the downlink quality offset, RXLEV_DL is the downlink level,
SOffSetDL is the downlink level offset, and FQSS is the current
quality offset determined by the level and the corresponding uplink
quality offset (SOffSetDl). The algorithm is as follows:
255 AvRxlevDL(n) < SOffSetDL + 20
InterFQSS= | QOffSetDl + 2 SOffSetDL + 20 AvRxlevDL(n) <
SOffSetDL + 30
| QOffSetDl + 3 SOffSetDL + 30 AvRxlevDL(n) < SOffSetDL + 40
QOffSetDl + 4 SOffSetDL + 40 AvRxlevDL(n)
Instance
Cell
Related FG
0..20
Unit
dB
Default Value
10
2-1197
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
environment.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.125 Invalid intra-handover time

Full Name
Invalid intra-handover time
Abbreviated Name
tMaxIHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1198
SJ-20140527134815-013|2015-03-10(R1.1)
Description
If an MS performs handover continuously in the cell, it indicates great

interference in this position and no appropriate channel is available.
In such a case, the MS shall be forbidden to perform handover
within a certain period. The method for making a decision is as
follows: If handover occurs within the invalid intra-handover time,
then the previous handover is considered to have no influence on
interference, the counter HoCount is incremented by 1 and TMaxIHo
restarts. If handover occurs after the invalid intra-handover time, the
previous handover is considered valid and the counter is reset to 0.
If the counter reaches MaxIHo, it indicates that no more attempt
is needed within a certain period, and the intra-cell interference
handover penalty is applicable.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
16
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too small, an invalid handover may be decided as a
valid handover.
If the value is too large, a valid handover may be decided as an
invalid handover.
Usually, if a handover occurs continuously within 16 measurement
Reason
reports (or preprocessing reports), it is considered as too frequent.
Change take effect
No
Access
Read/Write
OMC Access path


2-1199
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.126 MAX count of invalid intra-handover

Full Name
MAX count of invalid intra-handover
Abbreviated Name
maxIHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
If an MS performs handover continuously in the cell, it indicates great

interference in this position and no appropriate channel is available.
In such a case, the MS shall be forbidden to perform handover
within a certain period. The method for making a decision is as
follows: If handover occurs within the invalid intra-handover time,
then the previous handover is considered to have no influence on
interference, the counter HoCount is incremented by 1 and TMaxIHo
restarts. If handover occurs after the invalid intra-handover time, the
previous handover is considered valid and the counter is reset to 0.
If the counter reaches MaxIHo, it indicates that no more attempt
is needed within a certain period, and the intra-cell interference
handover penalty is applicable.
Instance
Cell
Related FG
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1200
SJ-20140527134815-013|2015-03-10(R1.1)
If the value is too small, a valid handover may be decided as an
invalid handover, and call drop may occur due to MS handover

penalty.
A too large value may cause invalid interference handovers to be
omitted and increase the number of invalid handovers.
The default value can ensure a correct decision on invalid handover.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.127 MAX path loss threshold on force handover

Full Name
MAX path loss threshold on force handover
Abbreviated Name
maxLossThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Forcible handover only aims at a speccified cell. It should meet the

following requirements: The tolerable level difference (MaxLevDiff)
should be lower than the PBGT handover threshold in the reverse
direction so that ping-pong handover can be avoided.
Forcible handover shall not lead to congestion in the target cell.
Therefore, to prevent congestion, the handover force resource
threshold (HoForceResThs) is designed to allow a forcible handover
only when the resource in the target cell is lower than the threshold.
For MSs to be handed over, those have low path loss and TA
shall be selected. When the path loss of an MS is lower than this
parameter value and the TA is less than the maximum time advance
(MaxTAThs) of the forcible handover, the MS can be handed over.
2-1201
SJ-20140527134815-013|2015-03-10(R1.1)
This algorithm applies to a dual-band network with 900 M and 1800

M cells sharing the same site.
When MaxTAThs is set to 63, the forcible handover decision is
made only based on the path loss of the MS. When MaxLossThs
is set to 150, the forcible handover decision is maded only based
on the time advance of the MS.
The decision still uses the N and P values of forcible handover.
Specifically, if HoForceP (P value of force handover) out of
HoForceN (N value of force handover) measurement reports meet
the condition, a forcible handover is allowed.
The path loss L=BS_TXPWR - AV_RXLEV_DL
Where, BS_TXPWR is the transmission power of the carrier where
the occupied timeslot is located, and the value depends on the
carrier's maximum transmission power, static attenuation power,
and power control. AV_RXLEV_DL is the downlink receiving level.
To initiate a forcible handover, the following conditions must be met:
The level in the target cell must be MaxLevDiff higher than that in
the local cell.
The resources of the target cell must be higher than the reserved
resource threshold (HoForceResThs).
The path loss (L) must be lower than MaxLossThs, and the time
advance (TA) must be less than MaxTAThs.
The target cell is a forcible handover cell.
Instance
Cell
Related FG
0..150
Unit
N/A
Default Value
110
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1202
SJ-20140527134815-013|2015-03-10(R1.1)
A forcible handvoer must meet the following conditions: 1. The level
in the target cell must be MaxLevDiff higher than that in the local
cell. 2. The resources of the target cell must be larger than the
reserved resource threshold (HoForceResThs). 3. The path loss (L)
must be lower than MaxLossThs, and the time advance (TA) must
be less than MaxTAThs. A large path loss indicates that the signal
strength in the target cell is low. Do not set the parameter too large.
A forcible handover must meet comparatively strict conditions. The
Reason
maximum path loss cannot be too low or large. The parameter is

invalid if the value is set to the maximum. 110 is an appropriate
value.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.128 MAX time advance threshold on force handover

Full Name
MAX time advance threshold on force handover
Abbreviated Name
maxTaThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1203
SJ-20140527134815-013|2015-03-10(R1.1)
Description

the local cell.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
2-1204
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A foricible handvoer must meet the following conditions: 1. The
level in the target cell must be MaxLevDiff higher than that in the
local cell. 2. The resources of the target cell must be larger than the
reserved resource threshold (HoForceResThs). 3. The path loss (L)
must be lower than MaxLossThs, and the time advance (TA) must
be less than MaxTAThs. The TA cannot be too large. A larger TA
indicates a lower the signal strength in the cell.
A forcible handover must meet comparatively strict conditions. If
Reason
the maximum TA is set too large, the signal of the neighbor cell is
poor. 5 is an appropriate value.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.129 N value of force handover

Full Name
N value of force handover
Abbreviated Name
hoForceN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1205
SJ-20140527134815-013|2015-03-10(R1.1)
Description

the local cell.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
2-1206
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A handover can be initiated if P out of N handovers succeed.
Therefore, smaller N and P values make it easier to initiate a

handover.
Based on the on-site experience, the forcible handover decision is
Reason
the most proper if the N value is set to 4 and P value 3,
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.130 P value of force handover

Full Name
P value of force handover
Abbreviated Name
hoForceP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1207
SJ-20140527134815-013|2015-03-10(R1.1)
Description

the local cell.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
2-1208
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A handover can be initiated if P out of N handovers succeed.
Therefore, smaller N and P values make it easier to initiate a

handover.
Based on the on-site experience, the forcible handover decision is
Reason
the most proper if the N value is set to 4 and P value 3,
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.131 Level offset for PBGT to up layer

Full Name
Level offset for PBGT to up layer
Abbreviated Name
pbgtHoUlLevOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the PBGT decision offset level in the cell
at the upper layer within a period (which depends on the lag time
for PBGT between different layers) for making a PBGT decision. It
is used to more effectively control traffic distribution in the cells at
different layers.
Instance
Cell
2-1209
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
ZGO-05-02-008 Multi-Layer Cell Structure

0..48
Unit
N/A
Default Value
24
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value 0-48 indicates -24 db to +24 db. It adds a hysteresis to
PBGT Margin to reduce or increase the speed and frequency of

PBGT handovers between different layers.
It is recommended to hand over to the lower layer as soon as
possible and keep intra-layer handover at the lower layer. The
PGBT handover to the upper layer is used only if the signal at the
upper layer keeps strong.
A large value helps balance the traffic and reduce congestion but
affects PBGT handovers to the upper layer and coverage.
By default, no offset is used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.132 Level offset for PBGT to low layer

Full Name
Level offset for PBGT to low layer

2-1210
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
pbgtHoDlLevOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the PBGT decision offset level in the cell at
the lower layer within a period (which depends on the lag time for
PBGT between different layers) for making a PBGT decision. It
is used to more effectively control traffic distribution in the cells at
different layers.
Instance
Cell
Related FG

0..48
Unit
N/A
Default Value
24
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value 0-48 indicates -24 db to +24 db. It adds a hysteresis to
PBGT Margin to reduce or increase the speed and frequency of

PBGT handovers between different layers.
It is recommended to hand over to the lower layer as soon as
possible and keep intra-layer handover at the lower layer. The
PGBT handover to the upper layer is used only if the signal at the
upper layer keeps strong.
A small value helps balance the traffic, reduce congestion, and
faciliate PBGT handovers to the lower layer, but affects the
coverage.
By default, no offset is used.
Reason
Change take effect
No
2-1211
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.133 Lag time for PBGT between different layers

Full Name
Lag time for PBGT between different layers
Abbreviated Name
pbgtHoLayerHyst
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the period within which the PBGT decision
offset level (the upper-layer and lower-layer PBGT decision levels
are 24 by default) in the cell at the upper layer for making a PBGT
decision. It is used to more effectively control traffic distribution in
the cells at different layers.
The timer starts after a inter-layer handover of the MS is completed.
After the timer expires, the PBGT handover does not use the offset.
Instance
Cell
Related FG
0..300
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1212
SJ-20140527134815-013|2015-03-10(R1.1)
If the value is 0, the system changes it to the default 50. If the lag
time does not time out, a level offset needs to be added for the
PBGT inter-layer handover.
A 50 second lag time for adding offsets to different layers can make
Reason
a inter-layerd PBGT handover most effective.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.134 The threshold for starting PBGT handover

Full Name
The threshold for starting PBGT handover
Abbreviated Name
pbgtHoStartThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The PBGT handover decision is made until the downlink level of

the current cell is lower than the start level threshold for PBGT
handover decision.
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
2-1213
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A larger value makes a PBGT handover more easily be triggered.
If traffic sharing is needed, set a large value. Otherwise, the

congestion rate is affected.
If traffic sharing is not needed, set a small value to reduce
unnecessary handovers. The coverage, however is affected.
For a 900M/1800M dual-band network, it is recommended to set the
900M cell to the largest value.
Generally, it is considered that the signal strength is good when the
Reason
power is -65 dBm and PBGT handover needn't be originated.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.135 The priority of the handover from Macro cell to Micro cell
Full Name
The priority of the handover from Macro cell to Micro cell
Abbreviated Name
macroMicroHoPrio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the macro-to-micro handover

decision has a higher priority than the PBGT handover decision.
If the switch is turned on, the macro-to-micro handover has a higher
priority.
If the switch is turned off, the PBGT handover has a higher priority.
2-1214
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the macro-to-micro handover switch is turned on, it is
recommended to turn on this switch.
If the macro-to-micro handover switch is turned on, it is
Reason
recommended to turn on this switch. Otherwise, turn off this switch.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.136 Handover from macro to micro

Full Name
Handover from macro to micro
Abbreviated Name
macroMicroStartThs
Managed Object
3GPP Name
N/A
2-1215
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
A macro-to-micro handover decision is made until the downlink level

of the current cell is lower than or equal to the start level threshold
for a macro-to-micro handover decision.
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
N/A
Default Value
63
Related Parameters
hoControlMacroMicro_L
hoControlMacroMicro_M
hoControlMacroMicro_H
hocontrol_13. This parameter takes effect only when the
Parameters
macro-to-micro handover switch is turned on.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A larger value indicates that a macro-to-micro handover are more
easily to be triggered, which helps traffic be transferred to a 1800M

cell. It is recommended to set the default value to the maximum
value, and adjust the parameter value based on the actual traffic
distribution of 900M and 1800M cells and future plan.
The default value is the maximum value, which can make the
Reason
network at the upper layer (usually the 1800 M network) take over
more traffic.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-1216
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.137 Hysteresis timer when traffic handover

Full Name
Hysteresis timer when traffic handover
Abbreviated Name
trafficHysteresisTm
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum hysteresis time, which is

the interval between two traffic handovers when multiple traffic
handovers are initiated in the cell.
Instance
Cell
Related FG
0..255
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is invalid in this version. The default value is used.
This parameter is invalid in this version. The default value is used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1217
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.138 Downlink rapid handover offset of high speed

Full Name
Downlink rapid handover offset of high speed
Abbreviated Name
dLRapidHoOffsetH
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
A downlink fast handover is triggered after necessary measurement

reports are received.
One of the reasons for a handover is downlink fast handover.
The decision to do a handover is made when each of the last
consecutive N downlink level (without being averaged) exceeds
the sum of the defined threshold and the offset acquired from
the speed. The handover reason is downlink fast handover. The
parameter DLRapidHoOffset_0 defines the offset threshold value
for the downlink fast handover when the train speed is higher than
250 km/h.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Handovers need to be triggered rapidly at a high speed. A small
offset makes the handover decision easily be made.
Reason
offset makes the handover decision easily be made.

2-1218
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.139 Downlink rapid handover offset of middle speed

Full Name
Downlink rapid handover offset of middle speed
Abbreviated Name
dLRapidHoOffsetM
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

for the downlink fast handover when the train speed is between
150 km/h and 250 km/h.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
2-1219
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is applicable to a coverage area that involves
fast-moving vehicles, such as high-speed railway and express way

and the train speed is 150 to 250 km/h.
If the speed is low, set a small offset so that the handover speed
is high.
The default value is set according to the radio environment that the
Reason
speed is mostly 150 to 250 km/h in the high-speed scenario.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.140 Downlink rapid handover offset of low speed

Full Name
Downlink rapid handover offset of low speed
Abbreviated Name
dLRapidHoOffsetL
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1220
SJ-20140527134815-013|2015-03-10(R1.1)
Description

consecutive N downlink level (without being averaged) exceeds the
sum of the defined threshold and the offset acquired from the speed.
The handover reason is downlink fast handover. The parameter
DLRapidHoOffset_2 defines the offset threshold value for the
downlink fast handover when the train speed is lower than 150 km/h.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
hoControlRapidNLevDl_L
hoControlRapidNLevDl_M
hoControlRapidNLevDl_H
This parameter is valid only when downlink fast handover is
Parameters
supported.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
fast-moving vehicles such as high-speed railway and express way

and the train speed is lower than 150 km/h.
is high.
Reason
speed is mostly lower than 150km/h in the high-speed scenario.
Change take effect
No
Access
Read/Write
OMC Access path


2-1221
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.141 Handover back penalty

Full Name
Handover back penalty
Abbreviated Name
hoBackPenalty
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time limit for handover back to the
original cell. In other words, after a handover is performed from
cell A to cell B, it is not allowed to perform a handover from cell B
back to cell A within the time limit. This parameter is applicable to
non-emergency handovers. For emergency handovers, use the
parameter HOBACKPENALTYEMERG to limit the time.
Instance
Cell
Related FG
0..60
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter is set too small, the handover back to the original
cell is easily triggered and pingpang handovers are caused.

If the parameter is set too large, the handover back to the original
cell is difficult to be triggered.
The default value can avoid the increase of handover frequency
Reason
resulting from pingpang handovers and ensure a call drop rate as

low as possible.
2-1222
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.142 MIN interval between inter-cell emergency handover

Full Name
MIN interval between inter-cell emergency handover
Abbreviated Name
HoMinIntervalEmerg
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

handover occurs frequently. This parameter helps restrict frequent
inter-cell handover and improves call quality.
concentric handover but instead the emergent inter-cell handover.
Emergency handovers include quality handover, level handover,
intra-cell interference handover, handover caused by fast fading of
uplink signals, handover caused by sudden uplink quality decrease,
handover from subcell 2 to subcell 1.
Instance
Cell
Related FG
0..31
Unit
Default Value
0
2-1223
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Adjust this parameter to an appropriate value to avoid frequent
handovers. Note that if the value is too large, call drop may occur
due to handover failure.
If an emergency handover is not performed, call drop occurs easily,
Reason
so handover is initiated once the requirement is met by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.143 Handover back penalty after emergency handover

Full Name
Handover back penalty after emergency handover
Abbreviated Name
HoBackPenaltyEmerg
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1224
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the time limit for handover back to

the original cell. In other words, after an emergent handover is
performed from cell A to cell B, it is not allowed to perform a
handover from cell B back to cell A within the time limit.
Instance
Cell
Related FG
0..60
Unit
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter is set too small, the handover back to the original
cell is easily triggered and pingpang handovers are caused.

If the parameter is set too large, the handover back to the original
cell is difficult to be triggered.
The default value can avoid the increase of handover frequency
Reason
resulting from pingpang handovers and ensure a call drop rate as

low as possible.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1225
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.144 Neighbour cell for emergency handover

Full Name
Neighbour cell for emergency handover
Abbreviated Name
NCellWindowEmerg
Managed Object
3GPP Name
Hreqave
3GPP Reference
N/A
Description

used to calculate the average signal strength of neighbor cells of
an emergency handover.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
making handover decisions is too small and the decisions are not
accurate.
2-1226
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
ensure the accuracy of handover decisions. On the other hand, to

avoid call drops, handover should be performed as early as possible
when signal quality is poor.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.145 Downlink rapid quality drop THS

Full Name
Downlink rapid quality drop THS
Abbreviated Name
DLQualRapidHoThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of downlink fast quality

handover.
To reduce the quality handover threshold span and make a precise
handover decision calculation, the values use multiples of 10 to limit
each quality level.
A threshold smaller than 10 indicates that the quality is lower than
1 and the quality level is 0, a threshold smaller than 20 indicates
that the quality level is 1, and so on. The threshold 70 indicates
that the quality level is 7.
Instance
Cell
Related FG
N/A
8..70
Unit
N/A
Default Value
60
2-1227
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the threshold and N value are, the more easily a quality
handover is triggered and the MS is handed over to a cell with a

better quality.
This handover is an emergency rescue handover. To ensure the
Reason
handover success rate, the cell quality and average window size
should not be too large.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.146 Downlink rapid quality drop Value N

Full Name
Downlink rapid quality drop Value N
Abbreviated Name
DLQualRapidHoN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1228
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the N value of downlink fast quality

handover.
To reduce the quality handover threshold span and make a precise
handover decision calculation, the values use multiples of 10 to limit
each quality level.
A threshold smaller than 10 indicates that the quality is lower than
1 and the quality level is 0, a threshold smaller than 20 indicates
that the quality level is 1, and so on. The threshold 70 indicates
that the quality level is 7.
Instance
Cell
Related FG
N/A
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the threshold and N value are, the more easily a quality
handover is triggered and the MS is handed over to a cell with a

better quality.
This handover is an emergency rescue handover. To ensure the
Reason
handover success rate, the cell quality and average window size
should not be too large.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1229
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.147 Quality weight of recent measure value

Full Name
Quality weight of recent measure value
Abbreviated Name
QualityAverageWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The quality weight of measurement report is represented by 20

parameters. The average uplink quality and average downlink
quality use this group of parameters. The first parameter indicates
the weight of the latest measurement report. For example, if the
quality weights are 100, 80, 60, and 40, and the quality average
window size is 4, the quality is averaged through the following
formula: QAVG=(Q1*100+Q2*80+Q3*60+Q4*40)/(100+80+60+40)
(Q1 is the latest measurement value of quality).
Instance
Cell
Related FG
1..100
Unit
N/A
Default Value
[100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100]
Related Parameters
N/A
N/A
Parameters
Value Type
long[20]
Parameter Type
Negotiation With CN
No
Function Switch
No
Set a larger weight for a more recent measurement report. Verify
the parameter setting by checking the indexes such as handover

success rate, call drop rate due to handover, and RQ.
The same weight is used by default.
Reason
Change take effect
No
2-1230
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.148 Level weight of recent measurement value level

Full Name
Level weight of recent measurement value level
Abbreviated Name
LevelAverageWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
For the calculation of average level in a period, different levels use

different weights to distinguish the importance. This parameter
indicates the weight of the recent Nth level.
Instance
Cell
Related FG
1..100
Unit
N/A
Default Value
[100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100]
Related Parameters
N/A
N/A
Parameters
Value Type
long[20]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1231
SJ-20140527134815-013|2015-03-10(R1.1)
If the measurement levels at different time points need to be
differentiated by the influence on the handover decision, set

different weights. Generally, set a higher weight for a more recent
measurement level.
This parameter is newly added in the 61 version. All levels use the
Reason
same weight by default so that the handover does not fluctuate

before and after upgrade.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.149 Penalty time for handover caused

by interference
Full Name
Penalty time for handover caused

by interference
Abbreviated Name
InterfHoPenalTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the penalty time of the interference

handover in a cell, including the penalty for handover failure and
continuous intra-cell handovers.
Instance
Cell
Related FG
1..255
Unit
N/A
Default Value
7
2-1232
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set this parameter based on the preprocessing period of
measurement reports. If the value is too small, continuous

unsuccessful or invalid handovers may occur.
If the value is too large, inter-cell handovers may not be triggered as
quickly as possible.
If pre-processed measurement reports are used for pre-processing,
Reason
the default 7 is long enough for penalty. Set a greater value if

common measurement reports are used.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.150 Interference band requirement for intracell handover

caused by interference
Full Name
Interference band requirement for intracell handover caused by

interference
Abbreviated Name
InterfBandforHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1233
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the maximum interference band required

by an intra-cell interference handover. If no channel has an
interference band smaller than or equal to the value of this
parameter), the intra-cell handover cannot be performed.
Instance
Cell
Related FG
1..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally use the default value. If the vlaue is too large, the
handover success rate may be affected. If the value is too small, no

channel may be allocated during an intra-cell handover.
If the value of interference band is not larger than 2, it indicates that
Reason
the interference in this channel is small enough. In this case, the

channel can be used for intra-cell interference handover.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.151 Prefer layer for traffic handover

Full Name
Prefer layer for traffic handover

2-1234
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
TrafficHoPreferLayer
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the preferred layer during a traffic

handover. In a layered network, neighbor cells belong to different
layers. This parameter can be used to set the layer to be first
selected for a traffic handover.
Instance
Cell
Related FG
0: Preferred when the adjacent cell and the local cell are on the
same layer
1: Preferred when the adjacent cell is on the upper layer of the local
cell
2: Preferred when the adjacent cell is on the lower layer of the local
cell
3: Preferred when the adjacent cell is on an undefined layer
255: No preferred layer
Unit
N/A
Default Value
255
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the preferred layer according to the network condition.
Generally, the layer with small traffic and able to take over traffic is
preferred, which is always the upper or the same layer.
The preferred layer and value are configured according to the
Reason
network condition. By default, this function is disabled.
Change take effect
No
2-1235
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.152 PBGT offset of prefer layer for traffic handover

Full Name
PBGT offset of prefer layer for traffic handover
Abbreviated Name
TrafficHoLayerOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the PBGT offset for the preferred layer
during a traffic handover. For the preferred layer,
its PBGT is added with an offset so that its priority can be increased
in the neighbor cell list sequenced by PBGT.
Instance
Cell
Related FG
0..48
Unit
dB
Default Value
24
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1236
SJ-20140527134815-013|2015-03-10(R1.1)
PBGT offset relates to the priority of the preferred layer. When the
system arranges the cells that meet the traffic handover threshold in
order, the larger the offset,
the easier that the cell gets the highest priority. However, if the
value is too large, the signal quality of the handover target cell may
be not optimal.
The preferred layer and value are configured according to the
Reason
network condition. By default, this function is disabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.153 Prefer band for traffic handover

Full Name
Prefer band for traffic handover
Abbreviated Name
TrafficHoPreferBand
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the preferred frequency band during a

traffic handover.
Instance
Cell
Related FG
0: P-GSM Preferred
1: E-GSM Preferred
2: DCS1800 Preferred
4: GSM1900 Preferred
7: GSM850 Preferred
255: No Prefer
2-1237
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
255
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the preferred layer according to the network condition.
Generally, the layer with small traffic and able to take over traffic is
preferred, which is always the upper or the same layer.
The preferred frequency band and value are configured according
Reason
to the network condition. By default, this function is disabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.154 PBGT offset of prefer band

Full Name
PBGT offset of prefer band

Abbreviated Name
TrafficHoBandOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1238
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the PBGT offset for the preferred frequency
band during a traffic handover. For the preferred frequency band, its
PBGT is added with an offset so that its priority can be increased in
the neighbor cell list sequenced by PBGT.
Instance
Cell
Related FG
0..48
Unit
Db
Default Value
24
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
PBGT offset relates to the priority of the preferred frequency band.
When the system arranges the cells that meet the traffic handover
threshold in order, the larger the offset,
the easier that the cell gets the highest priority. However, if the
value is too large, the signal quality of the handover target cell may
be not optimal.
The preferred frequency band and value are configured according
Reason
to the network condition. By default, this function is disabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1239
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.155 The threshold for starting Downlink Rapid handover

Full Name
The threshold for starting Downlink Rapid handover
Abbreviated Name
DLRapidHoStartThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink receiving level threshold

for a TCH fast handover decision. It is an auxiliary condition for
a downlink level fast handover. To initiate a downlink level fast
handover, the current level of the cell must be lower than the
threshold. Downlink level fast handover is a new handover algorithm
for the high-speed railway scenario. In this scenario, it is required to
configure different offsets for high, medium, and low speeds to adapt
to rapid attenuation of the downlink level. In addition, the handover
is only triggered between cells in the dedicated high-speed railway
network.
Instance
Cell
Related FG
0..63
0: < -110 dBm;
1: -110 dBm..-109 dBm;
2: -109 dBm..-108 dBm;
...
62: -49 dBm..-48 dBm;
63: > -48 dBm
step: 1
Unit
dBm
Default Value
63
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1240
SJ-20140527134815-013|2015-03-10(R1.1)
If the cells are much overlapped and the signal quality of the
neighbor cell is lower than the downlink fast handover threshold,

handover is not necessarily required. In this case, set a value lower
than the default so that a handover can be performed after the
signal in the cell is decreased to the threshold. To ensure handover
timeliness, a too small value is not recommended.
63 indicates that the system will make a handover decision on the
Reason
neighbor cells once the downlink fast handover is enabled. It can

ensure handover timeliness.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.156 High speed threshold

Full Name
High speed threshold
Abbreviated Name
HighSpeedThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether an MS moves at a high speed.

If the moving speed of an MS is higher than this threshold, the
system considers this scenario as a high-speed scenario.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
25
2-1241
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is not used in this version and does not need to
be adjusted.
According to empirical values, the system considers a scenario as a
Reason
high-speed scenario if the moving speed is faster than 250 km/h.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.157 Middle speed threshold

Full Name
Middle speed threshold
Abbreviated Name
MidSpeedThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether an MS moves at medium

speed. If the moving speed of an MS is higher than this threshold,
the system considers this scenario as a medium-speed scenario.
Instance
Cell
Related FG
2-1242
SJ-20140527134815-013|2015-03-10(R1.1)
0..255
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
be adjusted.
According to empirical values, the system considers a scenario as a
Reason
medium-speed scenario if the moving speed is faster than 150 km/h.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.158 The minimum interval of direction handover

Full Name
The minimum interval of direction handover
Abbreviated Name
DirHoMinInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1243
SJ-20140527134815-013|2015-03-10(R1.1)
Description

an actual inter-cell handover occurs if the previous handover
is directional. Such a timer is predominant for the MSs at the
boundary areas between two cells, where inter-cell handover occurs
frequently. This parameter helps restrict frequent inter-cell handover
and improves call quality.
concentric handover but instead the inter-cell handover.
The default value can be set to 5.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
be adjusted.
The default value is set to 5 s. Based on the on-site experience,
Reason
the MS is handed over to a cell with better signal quality instead

of handover back to the original cell within 5 s, to avoid repeated
handover failure.
Change take effect
No
Access
Read/Write
OMC Access path

2-1244
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.159 The ncell offset for downlink rapid handover

Full Name
The ncell offset for downlink rapid handover
Abbreviated Name
DLRapidHoNcellOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
If the current scenario is a high-speed scenario or the last handover

is a directional handover, when the system sorts target cells,
this parameter makes it easier to hand over to the adjacent cell
configured as a high-speed dedicate network cell.
Instance
Cell
Related FG
0..60
Unit
N/A
Default Value
24
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
be adjusted.
The meaning of 24 is the same as that of 0. This parameter is not
Reason
used in this version. It will be configured in the future according

to the network planning.
Change take effect
No
2-1245
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.160 The offset of ncell in the same direction

Full Name
The offset of ncell in the same direction
Abbreviated Name
SameDirNcellOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
If the last handover is a directional handover, when the system sorts

the target cells, this parameter makes it easier to hand over to the
target cell with the same direction as that of the handover.
Instance
Cell
Related FG
0..60
Unit
N/A
Default Value
24
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
be adjusted.
2-1246
SJ-20140527134815-013|2015-03-10(R1.1)
The meaning of 24 is the same as that of 0. This parameter is not
Reason
used in this version. It will be configured in the future according

to the network planning.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.24.161 Allow signal quality handover on TCH(High speed)

Full Name
Allow signal quality handover on TCH(High speed)
Abbreviated Name
BepHoControl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a handover function switch that indicates whether

to allow signal quality handover on TCH at a high speed.
Instance
Cell
Related FG
ZGO-02-02-023 Extended Measurement Report
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
MeanBEPHoThs,MeanBEPHoP,MeanBEPHoN,CVBEPHoThs,CVBEPHoP,CVBEPHoN
N/A
Parameters
Value Type
long
2-1247
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled when enhanced measurement reports
are used and the downlink quality handover high probability needs
to be improved in the network.
This function is used as an auxiliary function to the downlink quality
Reason
handover only when enhanced measurement reports are used. Turn

on this switch as required.
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.24.162 Allow signal quality handover on TCH(Middle speed)

Full Name
Allow signal quality handover on TCH(Middle speed)
Abbreviated Name
BepHoControl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

to allow signal quality handover on TCH at a moderate speed.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
2-1248
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
are used and the downlink quality handover probability needs to be

improved in the network.
Reason

Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.24.163 Allow signal quality handover on TCH(Low speed)

Full Name
Allow signal quality handover on TCH(Low speed)
Abbreviated Name
BepHoControl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

to allow signal quality handover on TCH at a low speed.
2-1249
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason

Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.24.164 Handover Threshole of Mean Bit Error Probability on TCH

Full Name
Handover Threshole of Mean Bit Error Probability on TCH
Abbreviated Name
MeanBEPHoThs
Managed Object
2-1250
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a threshold of the mean Bit Error

Probability (BEP) on TCH. It is used to determine a handover based
on signal quality.
The parameter value ranges from 0 to 31. MEAN_BEP = 0 means
that the actual mean BEP is greater than 25%. MEAN_BEP = 31
means that the actual mean BEP is smaller than 0.025%. The larger
the parameter value is, the lower the mean BEP is and the better
the signal quality is. A handover is required when the actual signal
quality is worse than the signal quality indicated by this threshold.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
BepHoControl
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the acceptable signal
quality in the actual network environment. It can be increased if

high signal quality is acceptable or decreased if low signal quality
is acceptable.
The default value is set according to the signal quality that can be
Reason
accepted.
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

2-1251
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.24.165 Handover P Number of Mean Bit Error Probability on TCH

Full Name
Handover P Number of Mean Bit Error Probability on TCH
Abbreviated Name
MeanBEPHoP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover P value when the mean bit
error probability is used as the handover threshold during a signal
quality handover on TCH.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
BepHoControl,MeanBEPHoN
P<N
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value is an empirical value. It is not recommended to modify
this parameter unless required.
Reason
Change take effect
New Connection
No
0
2-1252
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.24.166 Handover N Number of Mean Bit Error Probability on TCH

Full Name
Handover N Number of Mean Bit Error Probability on TCH
Abbreviated Name
MeanBEPHoN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover N value when the mean bit
error probability is used as the handover threshold during a signal
quality handover on TCH.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
BepHoControl,MeanBEPHoP
P<N
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
New Connection
2-1253
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.24.167 Handover Threshole of CV Bit Error Probability on TCH

Full Name
Handover Threshole of CV Bit Error Probability on TCH
Abbreviated Name
CVBEPHoThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a threshold of the CV_BEP on TCH. It is

used to determine a handover based on signal quality.
The parameter value ranges from 0 to 7. CV_BEP = 0 means that
the actual CV_BEP is greater than 1.75 but smaller than 2.00.
CV_BEP = 7 means that the actual CV_BEP is greater than 0.00 but
smaller than 0.25. The larger the parameter value is, the smaller the
signal variation is. A handover is required when the signal variation
and the mean BEP are too great.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
BepHoControl
N/A
Parameters
Value Type
long
Parameter Type
2-1254
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the acceptable variation
of signal quality in the actual network environment. It can be

increased if a large variation range is acceptable or decreased if a
small variation range is acceptable.
Reason
accepted.
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.24.168 Handover P Number of CV Bit Error Probability on TCH

Full Name
Handover P Number of CV Bit Error Probability on TCH
Abbreviated Name
CVBEPHoP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover P value when the CV bit

error probability is used as an auxiliary handover threshold during a
signal quality handover on TCH.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
2-1255
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
BepHoControl,CVBEPHoN
P<N
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.24.169 Handover N Number of CV Bit Error Probability on TCH

Full Name
Handover N Number of CV Bit Error Probability on TCH
Abbreviated Name
CVBEPHoN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover N value when the CV bit

error probability is used as an auxiliary handover threshold during a
signal quality handover on TCH.
Instance
Cell
Related FG
2-1256
SJ-20140527134815-013|2015-03-10(R1.1)
1..20
Unit
N/A
Default Value
Related Parameters
BepHoControl,CVBEPHoP
P<N
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.24.170 Is Dual-Frequency Traffic Handover Support

Full Name
Is Dual-Frequency Traffic Handover Support
Abbreviated Name
DualFreqHoSup
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch that determines whether traffic handover

in a dual-frequency network is allowed.
2-1257
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to "Yes" if an associated cell is configured
in the dual-frequency network and this cell is allowed to take over

traffic of the serving cell.
Generally, handover is not allowed in a dual-frequency network.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.171 Dual-Frequency Handover Parameter N

Full Name
Dual-Frequency Handover Parameter N
Abbreviated Name
DualFreqHoN
Managed Object
2-1258
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of N that is used for handover

decision in the dual-frequency network with the other two parameters
(DualFreqHoTAThs and DualFreqHoP). A handover decision is
made when P of N samples is lower than the TA threshold.
Instance
Cell
Related FG
1..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be adjusted to a smaller value if high-speed
handover decision making is required.
The default value is set to ensure correct and reliable handover
Reason
decision.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.172 Dual-Frequency Handover Parameter P

2-1259
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Dual-Frequency Handover Parameter P
Abbreviated Name
DualFreqHoP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of P that is used for handover

decision in the dual-frequency network with the other two parameters
(DualFreqHoTAThs and DualFreqHoN). A handover decision is
made when P of N samples is lower than the TA threshold.
Instance
Cell
Related FG
1..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
decision.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-1260
SJ-20140527134815-013|2015-03-10(R1.1)
2.24.173 Dual-Frequency Handover TA Threshold

Full Name
Dual-Frequency Handover TA Threshold
Abbreviated Name
DualFreqHoTAThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the TA threshold that is used for handover

decision in the dual-frequency network. A handover is allowed when
the TA is lower than this threshold.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
63
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be adjusted to a smaller value if the associated
cell in the dual-frequency network has a smaller coverage than the

current cell.
The downlink Rx level is used as the major condition for handover
Reason
decision because the distance obtained through TA measurement is

less accurate. In actual application, the condition for TA is not strict.
Therefore, this parameter is set to the maximum value by default.
Change take effect
No
Access
Read/Write
2-1261
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.174 Dual-Frequency Handover RxLevel Threshold

Full Name
Dual-Frequency Handover RxLevel Threshold
Abbreviated Name
DualFreqHoDLThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink Rx level threshold that

is used for handover decision. A handover is allowed in the
dual-frequency network only when the downlink Rx level is higher
than this threshold.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be adjusted to a smaller value to allow the
associated cell to take over more traffic of the current cell. This
parameter can be adjusted to a larger value to achieve a higher
handover success rate.
The default value indicates an Rx level that ensures normal services
Reason
in the cell.
2-1262
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.175 Circuit data handover control

Full Name
Circuit data handover control
Abbreviated Name
CSDATAHOControl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether handover is allowed in case

of CS data service.
Instance
Cell
Related FG
ZGB-01-03-002 Data Traffic Channels
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
GBssFunction.CSDATAHOControl
The handover of CS data service is allowed only when the handover
Parameters
feature is enabled at the same time.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1263
SJ-20140527134815-013|2015-03-10(R1.1)
If the handover of CS data service results in service damage, this
parameter can be set to forbid handover in case of CS data service.
The handover of CS data service is allowed in normal cases. The
Reason
handover is enabled when the corresponding global parameter is

enabled.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.176 Back to Source Cell when PBGT Handover

Full Name
Back to Source Cell when PBGT Handover
Abbreviated Name
PBGTHoBacktoSource
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the HO Access level in PBGT

handover is required to meet a specific condition. If the condition
is not met, no PHY Info is sent. The handover fails and the MS
returns to the source channel.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
2-1264
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter can be set to "Yes" when the MS is expected to
return to the source channel in case of PBGT handover failure on

the TCH.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.177 Back to Source Cell when Other Handover

Full Name
Back to Source Cell when Other Handover
Abbreviated Name
OtherHoBacktoSource
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the HO Access level in non

PBGT handover is required to meet a specific condition. If the
condition is not met, no PHY Info is sent. The handover fails and the
MS returns to the source channel.
Instance
Cell
Related FG

2-1265
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to "Yes" when the MS is expected
to return to the source channel when the handover (not PBGT

handover) fails on the TCH.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.178 HoAccess Require Rxlevel offset

Full Name
HoAccess Require Rxlevel offset
Abbreviated Name
HoAccessReqLevOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1266
SJ-20140527134815-013|2015-03-10(R1.1)
Description
The difference between the expected uplink level and the level in
the HO Access message can be used to determine whether an MS
in handover shall return to the source channel. The formula for
calculating the expected uplink level is: (110 - TargetAverageRxLevel
+ LinkBalance + (HoAccessReqLevOffset - 35)).
Where,
TargetAverageRxLevel indicates the last level of the target cell in
an inter-cell handover or an incoming handover from an external
BSC, or the downlink Rx level carried in an intra-cell handover or
assignment.
LinkBalance indicates a value for uplink and downlink balance.
It equals the actual transmit power of the BTS subtracted by the
transmit power of the MS.
HoAccessReqLevOffset indicates the level offset required for
handover detection.
Instance
Cell
Related FG
0..70
Unit
dB
Default Value
45
Related Parameters
OtherHoAccessLevSel
This parameter is effective when the parameter OtherHoAc-
Parameters
cessLevSel is set to 2.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be adjusted to a larger value if it is expected to
reduce the level requirement for handover detection.
The default value 45 indicates a level offset of 10 dB, which is
Reason
determined according to the empirical value for uplink and downlink

balance.
Change take effect
No
Access
Read/Write
2-1267
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.179 HoAccess Require Rxlevel Select Strategy when Other

Handover
Full Name
HoAccess Require Rxlevel Select Strategy when Other Handover
Abbreviated Name
OtherHoAccessLevSel
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
For the other types of handover (instead of PBGT handover), a

decision of returning to the source channel can be made according
to policy one based on the expected uplink level or policy two based
on the minimum allowed access level.
The formula for calculating the expected uplink level in
policy one is: (110 - TargetAverageRxLevel + LinkBalance +
(HoAccessReqLevOffset - 35)).
The formula for calculating the minimum allowed access level in
policy two is: (110- RxLevAccessMin).
Where,
TargetAverageRxLevel indicates the last level of the target cell in
an inter-cell handover or an incoming handover from an external
BSC, or the downlink Rx level carried in an intra-cell handover or
assignment.
LinkBalance indicates a value for uplink and downlink balance.
It equals the actual transmit power of the BTS subtracted by the
transmit power of the MS.
RxLevAccessMin indicates the minimum allowed access level.
Instance
Cell
Related FG
1: Expected uplink level

2: Minimum allowed access level
Unit
N/A
2-1268
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended if the TCH handover success rate
increases and the TCH call drop rate decreases when policy one is
used for determining return to the source channel in handover. If
these two performance indicators degrade, this parameter can be
adjusted to policy two and the effect must be observed.
By default, policy one is applied to accurately estimate the uplink
Reason
level for other types of handover.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.180 Dual-Frequency Traffic Handover Threshold

Full Name
Dual-Frequency Traffic Handover Threshold
Abbreviated Name
DualFreqOverLoadThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1269
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the traffic threshold for handover decision

in a dual-frequency network. If an associated cell is configured in
the dual-frequency network, a handover decision is made when the
traffic in the current cell is higher than this threshold and the traffic in
the associated cell is lower than this threshold.
Instance
Cell
Related FG
0..100
Unit
Default Value
70
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
achieve a better level after handover to the associated cell.
This default value is an empirical value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.181 Back to Source Cell when MSC Controlled Incoming

Handover
Full Name
Back to Source Cell when MSC Controlled Incoming Handover

2-1270
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
MSCHoInHoBack2Source
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables/disables the back-to-source-cell function

when TCH incoming handover is performed. That is, whether to
set requirements on handover Access level for incoming HO. PHY
Info is not delivered if the condition is not met and in this case, the
MS returns to its source channel.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled if the call drop rate is too high. It is
not recommended normally because during an incoming handover,

the original cell is not informed of MS' successful returning to the
source channel and therefore the handover-related indexes of the
original cell can be affected.
This function is enabled only when the call drop rate has to be
Reason
lowered. It's 0 by default.
Change take effect
No
Access
Read/Write
2-1271
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.182 Good level and bad quality handover enable

Full Name
Good level and bad quality handover enable
Abbreviated Name
GoodLevBadRQHoEnable
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter describes whether this cell supports good level and
bad quality handover. If the bad quality handover is determined
successfully but there is not a candidate cell, the system determines
whether to enable the high level and bad quality handover.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
GoodLevBadRQoffSet,GoodLevBadRQHoDLLev
Three parameters work together to fulfill the good level bad quality
Parameters
handover function.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled if drive tests show many call drops
caused by TCH's good level and bad quality. Observe the call
drop rate after the function is enabled. Disable the function
again if the call drop rate deteriorates, or adjust parameters
GoodLevBadRQoffSet and GoodLevBadRQHoDLLev.
2-1272
SJ-20140527134815-013|2015-03-10(R1.1)
By default, the handover due to good level and bad quality is
Reason
disabled.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.183 Good level and bad quality handover DL Level

Full Name
Good level and bad quality handover DL Level
Abbreviated Name
GoodLevBadRQHoDLLev
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers the high level and bad quality handover when
the downlink level of this cell is higher than this parameter.
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
30
Related Parameters
GoodLevBadRQoffSet,GoodLevBadRQHoEnable
Parameters
handover function.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1273
SJ-20140527134815-013|2015-03-10(R1.1)
This value can be lowered a bit if the good level bad quality-based
handover is hard to initiate. The call drop rate should be monitored

after this function is enabled. The value should be raised once the
call drop rate deteriorates.
Reason
the downlink level of this cell is higher than -80dB.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.184 HoAccess Require CI

Full Name
HoAccess Require CI
Abbreviated Name
HoAccessReqCI
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Applies to the case of returning to the source channell upon

handover failure. Set a proper CI threshould according to the CI
actually used so that a handover with the CI above the threshold
can be accessed and a handover with the CI below the threshold
will be returned.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
12
Related Parameters
N/A
2-1274
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Enable the function of returning to the source channel. Set a proper
value of this threshold according to the CI used in tests.
According to the lab data, demodulated signals of NB are bad when
Reason
the Rx signals CI is smaller than 12.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.24.185 Signal quality handover with cv_bep

Full Name
Signal quality handover with cv_bep
Abbreviated Name
CVBEPHoControl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether CV_BEP is considered for a

signal-quality-based handover.
Instance
Cell
Related FG
0: Off
1: On
2-1275
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
[0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
This function is disabled by default. If a signal-quality-based
handover is required, this function is enabled. Both the MEAN_BEP

and CV_BEP parameters are used for handover decision.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.24.186 Handover Threshold of Mean Bit Error Probability High

Full Name
Handover Threshold of Mean Bit Error Probability High
Abbreviated Name
MeanBEPHoThsHigh
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the high threshold of MEAN_BEP when

CV_BEP is considered for a signal-quality-based handover.
2-1276
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
24
Related Parameters
MeanBEPHoThs
MeanBEPHoThsHigh>=MeanBEPHoThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The experimental value is recommended. The value can be fine
tuned based on the signal quality in actual situations.
When CV_BEP is considered for a signal-quality-based handover,
Reason
the MEAN_BEP affect should also be considered.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.25 SDCCH Handover Control(GSdHandoverControl)

2.25.1 SDCCH Handover Control ID
Full Name
SDCCH Handover Control ID
Abbreviated Name
GSdHandoverControlId
Managed Object
SDCCH Handover Control(GSdHandoverControl)
2-1277
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an SDCCH handover control ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->SDCCH Handover Control
N/A
2.25.2 Allow Distance SDCCH handover(High Speed)

Full Name
Allow Distance SDCCH handover(High Speed)
Abbreviated Name
sdhoControlDis_H
2-1278
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an SDCCH handover

caused by distance at a high speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In scenarios where extended cells exist in broad coverage, this
parameter can be enabled for distance handovers between common

cells and extended cells. In other scenarios, the distance handover
is not recommended.
This parameter is a special handover algorithm. By default, it is
Reason
disabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1279
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.3 Allow PBGT SDCCH handover(High Speed)

Full Name
Allow PBGT SDCCH handover(High Speed)
Abbreviated Name
sdhoControlPbgt_H
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a standard SDCCH

handover caused by PBGT handover at a high speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Generally, only emergency handover is required for an SDCCH
handover and the PBGT handover is disabled.
Reason
handover.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-1280
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.4 Allow rapid SDCCH handover(High Speed)

Full Name
Allow rapid SDCCH handover(High Speed)
Abbreviated Name
sdhoControlRapid_H
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow an uplink fast fading

handover at a high speed. The uplink level fast handover is triggered
by fast fading of the uplink receiving level.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
of fast fading due to MS's fast and directional moving or obstacles.

It is recommended to enable this parameter for specific cells. In
addition, related cells need to be configured to accomplish fast
fading handovers between specific neighbor cells.
Enabling this handover may affect the handover success rate
but can help improve the call drop rate and coverage in special
scenarios.
Reason
disabled.
Change take effect
No
2-1281
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.25.5 Allow quality SDCCH handover in uplink(High Speed)

Full Name
Allow quality SDCCH handover in uplink(High Speed)
Abbreviated Name
sdhoControlQuaUl_H
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by downlink quality at a high speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is recommended to enable the rescue handover caused by uplink
quality to avoid poor voice quality and call drop.

Enabling this handover may cause frequent handovers but can help
reduce the call drop rate.
2-1282
SJ-20140527134815-013|2015-03-10(R1.1)
Quality handover is a basic handover algorithm.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.6 Allow level SDCCH handover in uplink(High Speed)

Full Name
Allow level SDCCH handover in uplink(High Speed)
Abbreviated Name
sdhoControlLevUl_H
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by uplink level at a high speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1283
SJ-20140527134815-013|2015-03-10(R1.1)
In common scenarios, it is recommended to disable the rescue
handovers caused by uplink level. In fast moving and broad

coverage scenarios, it is recommended to enable these handovers
and modify the handover threshold.
Level handover is a basic handover algorithm.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.7 Allow quality SDCCH handover in downlink(High Speed)

Full Name
Allow quality SDCCH handover in downlink(High Speed)
Abbreviated Name
sdhoControlQuaDl_H
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by downlink quality at a high speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
2-1284
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is recommended to enable the rescue handover caused by
downlink quality to avoid poor voice quality and call drop.

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.8 Allow level SDCCH handover in downlink(High Speed)

Full Name
Allow level SDCCH handover in downlink(High Speed)
Abbreviated Name
sdhoControlLevDl_H
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by downlink level at a high speed.
Instance
Cell
Related FG
2-1285
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
downlink level to avoid poor voice quality and call drop.

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.9 Downlink rapid SDCCH handover enable(High Speed)

Full Name
Downlink rapid SDCCH handover enable(High Speed)
Abbreviated Name
sdhoControlRapidDl_H
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1286
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether to allow an SDCCH downlink fast

handover at a high speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Neighbor cell level fast handover is generally used in special
scenarios such as high-speed railway scenario.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.10 Downlink rapid quality drop THS(High Speed)

Full Name
Downlink rapid quality drop THS(High Speed)
Abbreviated Name
sdhoControlRQuaDl_H
Managed Object

2-1287
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description

types.
downlink quality.
It is used for SDCCH handovers.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
This parameter is valid only when SDCCH handover is supported.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Enable this parameter if the downlink quality of the cell is poor due
to strong interference and the cell supports SDCCH handover.
This parameter needs to be enabled only when the cell has a poor
Reason
downlink quality and supports handover on SDCCH.
Change take effect
No
Access
Read/Write
OMC Access path

2-1288
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.25.11 Allow Distance SDCCH handover(Middle Speed)

Full Name
Allow Distance SDCCH handover(Middle Speed)
Abbreviated Name
sdhoControlDis_M
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

caused by distance at a moderate speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

is not recommended.
Reason
disabled.
Change take effect
No
2-1289
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.25.12 Allow PBGT SDCCH handover(Middle Speed)

Full Name
Allow PBGT SDCCH handover(Middle Speed)
Abbreviated Name
sdhoControlPbgt_M
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

handover caused by PBGT handover at a moderate speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
handover.
Change take effect
2-1290
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.25.13 Allow rapid SDCCH handover(Middle Speed)

Full Name
Allow rapid SDCCH handover(Middle Speed)
Abbreviated Name
sdhoControlRapid_M
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

handover at a moderate speed. The uplink level fast handover is
triggered by fast fading of the uplink receiving level.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1291
SJ-20140527134815-013|2015-03-10(R1.1)

scenarios.
Reason
disabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.14 Allow quality SDCCH handover in uplink(Middle Speed)

Full Name
Allow quality SDCCH handover in uplink(Middle Speed)
Abbreviated Name
sdhoControlQuaUl_M
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by uplink quality at a moderate speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
2-1292
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.15 Allow level SDCCH handover in uplink(Middle Speed)

Full Name
Allow level SDCCH handover in uplink(Middle Speed)
Abbreviated Name
sdhoControlLevUl_M
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by uplink level at a moderate speed.
Instance
Cell
2-1293
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.16 Allow quality SDCCH handover in downlink(Middle Speed)

Full Name
Allow quality SDCCH handover in downlink(Middle Speed)
Abbreviated Name
sdhoControlQuaDl_M
Managed Object

2-1294
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by downlink quality at a moderate speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.17 Allow level SDCCH handover in downlink(Middle Speed)

2-1295
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Allow level SDCCH handover in downlink(Middle Speed)
Abbreviated Name
sdhoControlLevDl_M
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow SDCCH handover

triggered by downlink level at a moderate speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1296
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.18 Downlink rapid SDCCH handover enable(Middle Speed)

Full Name
Downlink rapid SDCCH handover enable(Middle Speed)
Abbreviated Name
sdhoControlRapidDl_M
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

handover at a moderate speed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Neighbor cell level fast handover is generally used in special
scenarios such as high-speed railway scenario.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1297
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.19 Downlink rapid quality drop THS(Middle Speed)

Full Name
Downlink rapid quality drop THS(Middle Speed)
Abbreviated Name
sdhoControlRQuaDl_M
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

types.
downlink quality.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
2-1298
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.25.20 Allow SDCCH handover

Full Name
Allow SDCCH handover
Abbreviated Name
sdhoControl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether SDCCH handover is allowed.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If an MS is easy to move out of the cell due to fast speed or small
cell coverage, enable SDCCH handover to avoid call establishment

failure.
2-1299
SJ-20140527134815-013|2015-03-10(R1.1)
Few handovers are performed on SDCCH. Enable this function only
Reason
when required.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.21 Allow Distance SDCCH handover(Low Speed)

Full Name
Allow Distance SDCCH handover(Low Speed)
Abbreviated Name
sdhoControlDis_L
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

caused by distance.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1300
SJ-20140527134815-013|2015-03-10(R1.1)

is not recommended.
Reason
disabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.22 Allow PBGT SDCCH handover(Low Speed)

Full Name
Allow PBGT SDCCH handover(Low Speed)
Abbreviated Name
sdhoControlPbgt_L
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

handover caused by PBGT handover.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
2-1301
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
handover.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.25.23 Allow dynamic adjustment of SDCCH handover priority

Full Name
Allow dynamic adjustment of SDCCH handover priority
Abbreviated Name
sdhoControlDynPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow dynamic adjustment of

handover priority during an SDCCH handover.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
2-1302
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Dynamic priority enables traffic to be considered during a handover
and thus optimizes traffic distribution. It is recommended to enable

this parameter in areas with heavy traffic. If traffic handover is
enabled, this parameter must be enabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.24 Allow rapid SDCCH handover(Low Speed)

Full Name
Allow rapid SDCCH handover(Low Speed)
Abbreviated Name
sdhoControlRapid_L
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

handover at a low speed. The uplink level fast handover is triggered
by fast fading of the uplink receiving level.
Instance
Cell
Related FG

2-1303
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

scenarios.
Reason
disabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.25 Allow quality SDCCH handover in uplink(Low Speed)

Full Name
Allow quality SDCCH handover in uplink(Low Speed)
Abbreviated Name
sdhoControlQuaUl_L
Managed Object
2-1304
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by uplink quality.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1305
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.26 Allow level SDCCH handover in uplink(Low Speed)

Full Name
Allow level SDCCH handover in uplink(Low Speed)
Abbreviated Name
sdhoControlLevUl_L
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by uplink level.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
No
Access
Read/Write
2-1306
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.25.27 Allow quality SDCCH handover in downlink(Low Speed)

Full Name
Allow quality SDCCH handover in downlink(Low Speed)
Abbreviated Name
sdhoControlQuaDl_L
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by downlink quality.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
2-1307
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.25.28 Allow level SDCCH handover in downlink(Low Speed)

Full Name
Allow level SDCCH handover in downlink(Low Speed)
Abbreviated Name
sdhoControlLevDl_L
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by downlink level.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1308
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.29 Downlink rapid SDCCH handover enable(Low Speed)

Full Name
Downlink rapid SDCCH handover enable(Low Speed)
Abbreviated Name
sdhoControlRapidDl_L
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

handover.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
2-1309
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
SDCCH handover and neighbor cell level fast handover are
generally used in special scenarios such as high-speed railway

scenario.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.30 Downlink rapid quality drop THS(Low Speed)

Full Name
Downlink rapid quality drop THS(Low Speed)
Abbreviated Name
sdhoControlRQuaDl_L
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1310
SJ-20140527134815-013|2015-03-10(R1.1)
Description

types.
downlink quality.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1311
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.31 Perform PBGT SDCCH handover by Directed retry(Low

Speed)
Full Name
Perform PBGT SDCCH handover by Directed retry(Low Speed)
Abbreviated Name
sdhoControlPbgtDr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to use the directed retry mode in a

PBGT SDCCH handover. If the parameter is enabled, an MS does
not perform an SDCCH handover, but is directly handed over to the
TCH of a better cell after the core network sends the assignment
request.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Enable this parameter so that an MS can be directly handed over
the TCH of a better cell through directed retry during an SDCCH

handover. This can reduce the call drop rate.
It is a feature function switch.
Reason
Change take effect
No
2-1312
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
hoUlLevWindow
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In the GSM system, the BSC makes SDCCH handover decisions

according to the measurement data. To avoid the negative impact
of burst measurement values resulting from complicated radio
transmission, the BSC, when making a handover decision, no longer
uses the original measurement data but instead a series of average
values of the measurement data.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1313
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter indicates the average window size.
If value of this parameter is too big, then quite many measurement

reports will be needed to attempt a computing of the average value
to eliminate the impact of signal fluctuation, but this may easily lead
to hysteresis and affect the handover success rate, call drop rate,
and coverage.
If value of this parameter is too small, then it does not need many
measurement reports to attempt a computing of the average value,
that is, handover decision will be done quickly, but this may easily
lead to wrong decisions and affect the handover success rate, call
drop rate, and coverage.
SDCCH occupation time is comparatively short and therefore the
Reason
window size is small.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
hoDlLevWindow
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1314
SJ-20140527134815-013|2015-03-10(R1.1)
Description

used to calculate the average downlink signal strength.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A large value can eliminate the impact of some incorrect
measurements. However, a too large value may prevent the

system from making a timely handover decision. In addition, the
measurements are insufficient because of short SDCCH occupation
time.
Set this parameter based on the radio environment. The value
Reason
should be smaller than that for TCH due to shorter occupation time.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1315
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
hoUlQualWindow
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

to hysteresis, affect the call quality and coverage, and lead to call
drop.
2-1316
SJ-20140527134815-013|2015-03-10(R1.1)
lead to wrong decisions and affect the call quality and coverage,
and lead to call drop.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
hoDlQualWindow
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..20
Unit
N/A
2-1317
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A large value can eliminate the impact of some incorrect
measurements. However, a too large value may prevent the

system from making a timely handover decision. In addition, the
measurements are insufficient because of short SDCCH occupation
time.
Set this parameter based on the radio environment. The value
Reason
should be smaller than that for TCH due to shorter occupation time.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.36 Distance Sample count

Full Name
Distance Sample count
Abbreviated Name
distanceWindow
Managed Object

3GPP Name
Hreqave
3GPP Reference
N/A
2-1318
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Because an MS stays on SDCCH for a short time, compared with
Reason
TCH, the window size is small to ensure a timely handover.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1319
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.37 Neighboring cell Sample count

Full Name
Neighboring cell Sample count
Abbreviated Name
ncellWindow
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

to hysteresis and affect the handover success rate, call drop rate,
and coverage.
2-1320
SJ-20140527134815-013|2015-03-10(R1.1)
lead to wrong decisions and affect the handover success rate, call
drop rate, and coverage.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
zeroAllowed
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of null measurement reports

allowed in an SDCCH handover.
data of up to six adjacent cells with strongest signal strength.
not be consecutive. For cells whose signal strength is less than
-110 dBm, the measured data is not reported. The BSC marks the
measured data of these unreported cells as zero.
To avoid the negative impact of zeros on averaging, suppose
that occasional zeros are allowed and are not used in averaging.
of this adjacent cell are poor.
This parameter specifies the number of occurrences of zeros used
for average calculation that can be allowed or ignored during
averaging.
2-1321
SJ-20140527134815-013|2015-03-10(R1.1)
To be specific, during averaging, if the number of zeros in the

sample exceeds ZeroAllowed, these sample values are regarded
as unreliable, and the measurement average is the sum of the
reported values divided by NCellWindow. If the number of zeros in
the reported values does not exceed ZeroAllowed, these sample
values are regarded as reliable, and the measurement average
number of zeros).
Instance
Cell
Related FG
0..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A larger value indicates that the system is more tolerable with the
unstable MS measurement. Use a larger value when there are a

great number of neighbor cells or the radio environment has large
interference.
Normally, with the general window value and N value, one null value
Reason
can be accepted.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1322
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
hoUlLevThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In accordance with GSM specifications, an SDCCH handover

decision can be made after the required average values are
acquired. The uplink received signal strength is one of the reasons
for handover. For the N averages of the recently received signal
strength values in the uplink, if P averages of them are less than
the threshold, the MS should be handed over because the uplink
signal strength value is too low.
first. If power control does not work, handover is performed. The
default value can be set to 15, meaning -96 dBm to -95 dBm.
Instance
Cell
Related FG
0: < -110dBm
1: -110~-109 dBm
2: -109~-108dBm
3: -108~-107dBm
4: -107~-106dBm
5: -106~-105dBm
6: -105~-104dBm
7: -104~-103dBm
8: -103~-102dBm
9: -102~-101dBm
10: -101~-100dBm
11: -100~-99dBm
12: -99~-98dBm
13: -98~-97dBm
14: -97~-96dBm
15: -96~-95dBm
16: -95~-94dBm
2-1323
SJ-20140527134815-013|2015-03-10(R1.1)
17: -94~-93dBm
18: -93~-92dBm
19: -92~-91dBm
20: -91~-90dBm
21: -90~-89dBm
22: -89~-88dBm
23: -88~-87dBm
24: -87~-86dBm
25: -86~-85dBm
26: -85~-84dBm
27: -84~-83dBm
28: -83~-82dBm
29: -82~-81dBm
30: -81~-80dBm
31: -80~-79dBm
32: -79~-78dBm
33: -78~-77dBm
34: -77~-76dBm
35: -76~-75dBm
36: -75~-74dBm
37: -74~-73dBm
38: -73~-72dBm
39: -72~-71dBm
40: -71~-70dBm
41: -70~-69dBm
42: -69~-68dBm
43: -68~-67dBm
44: -67~-66dBm
45: -66~-65dBm
46: -65~-64dBm
47: -64~-63dBm
48: -63~-62dBm
49: -62~-61dBm
50: -61~-60dBm
51: -60~-59dBm
52: -59~-58dBm
53: -58~-57dBm
54: -57~-56dBm
55: -56~-55dBm
56: -55~-54dBm
57: -54~-53dBm
58: -53~-52dBm
59: -52~-51dBm
60: -51~-50dBm
2-1324
SJ-20140527134815-013|2015-03-10(R1.1)
61: -50~-49dBm
62: -49~-48dBm
63: > -48dBm
Unit
N/A
Default Value
Related Parameters
ShoEnable
HoDlLevThs<PcDlInclLevThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too large, the call drop rate may increase. If the value
is too small, too many handovers may be triggered.
It is recommended to set a low value to avoid frequent uplink level
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
hoDlLevThs
Managed Object

3GPP Name
N/A
2-1325
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

acquired. The downlink received signal strength is one of the
reasons for handover. For the N averages of the recently received
signal strength values in the downlink, if P averages of them are
less than the threshold, the MS should be handed over because the
downlink signal strength value is too low.
performed. The default value can be set to 15, meaning -96 dBm
to -95 dBm.
Instance
Cell
Related FG
0: < -110dBm
1: -110 .. -109 dBm
2: -109 .. -108dBm
3: -108 .. -107dBm
4: -107 .. -106dBm
5: -106 .. -105dBm
6: -105 .. -104dBm
7: -104 .. -103dBm
8: -103 .. -102dBm
9: -102 .. -101dBm
10: -101 .. -100dBm
11: -100 .. -99dBm
12: -99 .. -98dBm
13: -98 .. -97dBm
14: -97 .. -96dBm
15: -96 .. -95dBm
16: -95 .. -94dBm
17: -94 .. -93dBm
18: -93 .. -92dBm
19: -92 .. -91dBm
20: -91 .. -90dBm
21: -90 .. -89dBm
22: -89 .. -88dBm
23: -88 .. -87dBm
24: -87 .. -86dBm
2-1326
SJ-20140527134815-013|2015-03-10(R1.1)
25: -86 .. -85dBm

26: -85 .. -84dBm
27: -84 .. -83dBm
28: -83 .. -82dBm
29: -82 .. -81dBm
30: -81 .. -80dBm
31: -80 .. -79dBm
32: -79 .. -78dBm
33: -78 .. -77dBm
34: -77 .. -76dBm
35: -76 .. -75dBm
36: -75 .. -74dBm
37: -74 .. -73dBm
38: -73 .. -72dBm
39: -72 .. -71dBm
40: -71 .. -70dBm
41: -70 .. -69dBm
42: -69 .. -68dBm
43: -68 .. -67dBm
44: -67 .. -66dBm
45: -66 .. -65dBm
46: -65 .. -64dBm
47: -64 .. -63dBm
48: -63 .. -62dBm
49: -62 .. -61dBm
50: -61 .. -60dBm
51: -60 .. -59dBm
52: -59 .. -58dBm
53: -58 .. -57dBm
54: -57 .. -56dBm
55: -56 .. -55dBm
56: -55 .. -54dBm
57: -54 .. -53dBm
58: -53 .. -52dBm
59: -52 .. -51dBm
60: -51 .. -50dBm
61: -50 .. -49dBm
62: -49 .. -48dBm
63: > -48dBm
Unit
N/A
Default Value
18
Related Parameters
ShoEnable
2-1327
SJ-20140527134815-013|2015-03-10(R1.1)
HoDlLevThs<PcDlInclLevThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to set a large value to ensure that a handover
Reason
can be triggered in a timely manner when the level is reduced.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
hoUlQualThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1328
SJ-20140527134815-013|2015-03-10(R1.1)
Description

acquired. The uplink received signal quality is one of the reasons
quality levels in the uplink, if P averages of them are greater than
signal quality is too poor.
threshold (PcUlInclQualThs) for uplink power control (increase). In
this case, power is controlled first. If power control does not work,
handover is performed.
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
39
Related Parameters
ShoEnable
HoDlQualThs>PcDlInclQualThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To ensure the timeliness of quality handovers, the threshold, N
Reason
value, and P value of SDCCH quality handover should be slightly

lower than those of TCH.
Change take effect
No
Access
Read/Write
2-1329
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A

Full Name
Abbreviated Name
HoDlQualThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

acquired. The downlink received signal quality is one of the reasons
quality levels in the downlink, if P averages of them are greater than
the threshold, the MS should be handed over because the downlink
threshold (PcDlInclQualThs) for downlink power control (increase).
In this case, power is controlled first. If power control does not work,
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
39
Related Parameters
ShoEnable
HoDlQualThs>PcDlInclQualThs
Parameters
Value Type
long
2-1330
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
hoUlLevP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1331
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
HoDlLevP<=HoDlLevN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
value is too small, unnecessary handovers may occur.
The default value is set to ensure a rapid and correct handover.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1332
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
hoUlLevN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
HoDlLevP<=HoDlLevN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1333
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No

The default value is set based on the normal wireless environment.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
hoDlLevP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

2-1334
SJ-20140527134815-013|2015-03-10(R1.1)

to -95 dBm.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
HoDlLevP<=HoDlLevN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
hoDlLevN
2-1335
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

to -95 dBm.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
HoDlLevP<=HoDlLevN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
2-1336
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
hoUlQualP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..20
Unit
N/A
2-1337
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
ShoEnable
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
hoUlQualN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1338
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
2-1339
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
hoDlQualP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
Parameters
2-1340
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
hoDlQualN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1341
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
2-1342
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
rapidHoThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Some parameters are required during uplink fast fading handover.

During an SDCCH handover, the fast handover threshold indicates
uplink signal strength. If the measured uplink signal strength of a
call is consecutively less than this threshold, the uplink fast fading
handover condition is fulfilled and the associated cells among the
neighbor cells are the candidates for the target cell.
handover. The value of RapidHoN value should at least ensure that
a fast handover is faster than a command signal level handover.
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
N/A
Default Value
10
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
2-1343
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter takes effect after the handover due to fast level
decrease (HoControl13) is enabled. The RapidHoThs value should

be smaller than or equal to the downlink level handover threshold
and at the same time, the decision N value is smaller than the level
decision N value.
The default value is generally used.
In fast moving and weak coverage scenarios, it can reduce the
call drop rate due to failure of timely handover and improve the
To ensure a quick handover, the level threshold of an uplink fast
Reason
fading handover is low and the N value is small.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
rapidHoN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1344
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Some parameters are required during uplink fast fading handover.

During an SDCCH handover, the fast handover threshold indicates
uplink signal strength. If the measured uplink signal strength of a
call is consecutively less than this threshold, the uplink fast fading
handover condition is fulfilled and the associated cells among the
neighbor cells are the candidates for the target cell.
handover. The value of RapidHoN value should at least ensure that
a fast handover is faster than a command signal level handover.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter takes effect after the handover due to fast level
decrease (HoControl13) is enabled. The RapidHoThs value should

be smaller than or equal to the downlink level handover threshold
and at the same time, the decision N value is smaller than the level
decision N value.
The default value is generally used.
In fast moving and weak coverage scenarios, it can reduce the
call drop rate due to failure of timely handover and improve the
To ensure a quick handover, the level threshold of an uplink fast
Reason
fading handover is low and the N value is small.
Change take effect
No
2-1345
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
distanceThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
{parent.cellType==4}[0..219]
Unit
N/A
Default Value
{parent.cellType==4}219
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
2-1346
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
The TA handover is scarcely used. Configure it if required.
Generally, the distance handover is not triggered. The maximum
Reason
value is used by default.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A

Full Name
Abbreviated Name
distanceP
Managed Object

3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description

acquired.
The parameter DistanceN defines the related N value. The
parameter DistanceP defines the related P value.
Instance
Cell
2-1347
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
Parameters
The parameter value should be smaller than or equal to DistanceN.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

easily.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
distanceN
Managed Object

2-1348
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description

acquired.
The parameter DistanceN defines the related N value. The
parameter DistanceP defines the related P value.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
Parameters
The parameter value should be greater than or equal to DistanceP.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1349
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.25.56 Downlink rapid handover offset of high speed

Full Name
Downlink rapid handover offset of high speed
Abbreviated Name
dlRapidHoOffsetH
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
An SDCCH downlink fast handover is triggered after necessary

measurement reports are received.
for the downlink fast handover when the train speed is higher than
250 km/h.
Instance
Related FG
Cell
0..63
Unit
dB
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1350
SJ-20140527134815-013|2015-03-10(R1.1)
offset helps the handover decision to be easily made.
Different offsets are used for different speed levels. For high speed,
Reason
the offset should be small. 0 is used by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.57 Downlink rapid handover offset of middle speed

Full Name
Downlink rapid handover offset of middle speed
Abbreviated Name
dlRapidHoOffsetM
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

for the downlink fast handover when the train speed is between 150
km/h and 250 km/h on SDCCH.
Instance
Cell
Related FG
0..63
2-1351
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
dB
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

and the train speed is 150 to 250 km/h.
is high.
Reason
speed is mostly 150 to 250 km/h in the high-speed scenario.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.58 Downlink rapid handover offset of low speed

Full Name
Downlink rapid handover offset of low speed
Abbreviated Name
dlRapidHoOffsetL
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1352
SJ-20140527134815-013|2015-03-10(R1.1)
Description
An SDCCH downlink fast handover is triggered after necessary

The handover reason is downlink fast handover. The parameter
DLRapidHoOffset_2 defines the offset threshold value for the
downlink fast handover when the train speed is lower than 150 km/h.
Instance
Cell
Related FG
0..63
Unit
dB
Default Value
Related Parameters
ShoEnable
This parameter is valid only when SDCCH downlink fast handover is
Parameters
supported.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

and the train speed is lower than 150 km/h.
is high.
Reason
speed is mostly lower than 150km/h in the high-speed scenario.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1353
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
pbgtHoP
Managed Object

3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description
This parameter indicates the values of N and P for PBGT handover

during SDCCH handover. In the process of a PBGT handover, if P
out of N PBGT values satisfy the handover decision condition, the
PBGT handover condition is fulfilled.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, modification of this parameter may change the number of
handover attempts and executions. A large value does not trigger a

handover easily and tends to cause call drops.
Reason

decision is made.
Change take effect
No
Access
Read/Write
2-1354
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A

Full Name
Abbreviated Name
pbgtHoN
Managed Object

3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description
This parameter indicates the values of N and P for PBGT handover

during SDCCH handover. In the process of a PBGT handover, if P
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
handover attempts and executions. A large value does not trigger a

handover easily and tends to cause call drops.
Reason

decision is made.
2-1355
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.61 Downlink rapid quality drop THS

Full Name
Downlink rapid quality drop THS
Abbreviated Name
dlQualRapidHoThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of the SDCCH downlink

fast quality handover. Downlink quality fast handover is introduced
to optimize the call drop rate. If a cell has spots with serious
interference, a call drop may occur due to poor downlink quality
after an MS starts a call or is handed over to the cell. In this case,
the current quality handover algorithm is not suitable. The downlink
quality fast handover algorithm is provided for decision-making
of rescue handovers. This algorithm uses the raw measurement
data of downlink quality, applies no window for neighbor cells to
ensure fast speed, and shares the N value used for other handover
decisions.
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
60
Related Parameters
ShoEnable
2-1356
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
is too small, too many handovers may be triggered. This function
may increase the handover failure rate. Pay attention to the change
of the handover success rate.
If the quality value is higher than 60, a fast handover needs to be
Reason
performed.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.62 Downlink rapid quality drop Value N

Full Name
Downlink rapid quality drop Value N
Abbreviated Name
dlQualRapidHoN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1357
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the N value of the SDCCH downlink fast

quality handover. This parameter indicates the threshold of downlink
fast quality handover. Downlink quality fast handover is introduced
to optimize the call drop rate. If
a cell has spots with serious interference, a call drop may occur due
to poor downlink quality after an MS starts a call or is handed over
to the cell. In this case, the current quality handover algorithm is not
suitable. The downlink quality fast handover algorithm is provided
for decision-making of rescue handovers.This algorithm uses the
raw measurement data of downlink quality, applies no window for
neighbor cells to ensure fast speed, and shares the N value used for
other handover decisions.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1358
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.25.63 Neighbour cell for emergency handover

Full Name
Neighbour cell for emergency handover
Abbreviated Name
ncellWindowEmerg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

to the measurement data during an SDCCH handover. To avoid
the negative impact of burst measurement values resulting from
complicated radio transmission, the BSC, when making a handover
decision, no longer uses the original measurement data but instead
a series of average values of the measurement data.
used to calculate the average signal strength of neighbor cells of
an emergency handover.
Emergency handovers include uplink/downlink quality handover,
uplink/downlink level handover, uplink fast fading handover, subcell
concentric handover (caused by path loss and too large TA),
downlink quality fast handover.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1359
SJ-20140527134815-013|2015-03-10(R1.1)
Generally, modification of this parameter may change the sensitivity
that a neighbor cell is selected as the target cell during handover

decision. A large value makes a neighbor cell hard to be selected
as the target cell.
1 is used generally. The average value of neighbor cells should
Reason
not be too large. The emergency handover should reflect the

measurement data of a short time.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.25.64 Allow signal quality handover on SDCCH(High speed)

Full Name
Allow signal quality handover on SDCCH(High speed)
Abbreviated Name
sdBepHoControl_H
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

to allow signal quality handover on SDCCH at a high speed.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
sdMeanBEPHoThs,sdMeanBEPHoP,sdMeanBEPHoN,sdCVBEPHoThs,sdCVBEPHoP,sdCVBEPHoN
2-1360
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

It is a newly-added handover function and may be overlapped with
Reason
the downlink quality handover.
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.25.65 Allow signal quality handover on SDCCH(Middle speed)

Full Name
Allow signal quality handover on SDCCH(Middle speed)
Abbreviated Name
sdBepHoControl_M
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

to allow signal quality handover on SDCCH at a moderate speed.
Instance
Cell
Related FG
2-1361
SJ-20140527134815-013|2015-03-10(R1.1)
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.25.66 Allow signal quality handover on SDCCH(Low speed)

Full Name
Allow signal quality handover on SDCCH(Low speed)
Abbreviated Name
sdBepHoControl_L
Managed Object

3GPP Name
N/A
2-1362
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

to allow signal quality handover on SDCCH at a low speed.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.25.67 Handover Threshold of Mean Bit Error Probability on

SDCCH
2-1363
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Handover Threshold of Mean Bit Error Probability on SDCCH
Abbreviated Name
sdMeanBEPHoThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a threshold of the mean BEP on SDCCH.

It is used to determine a handover based on signal quality.
The parameter value ranges from 0 to 31. MEAN_BEP = 0 means
that the actual mean BEP is greater than 25%. MEAN_BEP = 31
means that the actual mean BEP is smaller than 0.025%. The larger
the parameter value is, the lower the mean BEP is and the better
the signal quality is. A handover is required when the actual signal
quality is worse than the signal quality indicated by this threshold.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
sdBepHoControl
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the acceptable signal
quality in the actual network environment. It can be increased if

high signal quality is acceptable or decreased if low signal quality
is acceptable.
Reason
accepted.
Change take effect
New Connection
No
2-1364
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.25.68 Handover Value P of Mean Bit Error Probability on SDCCH

Full Name
Handover Value P of Mean Bit Error Probability on SDCCH
Abbreviated Name
sdMeanBEPHoP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover P value when the mean

bit error probability is used as the threshold for a signal quality
handover on SDCCH.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
sdBepHoControl,sdMeanBEPHoN
P<N
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is not recommended to adjust this parameter.
Reason
Change take effect
New Connection
2-1365
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.25.69 Handover Value N of Mean Bit Error Probability on SDCCH

Full Name
Handover Value N of Mean Bit Error Probability on SDCCH
Abbreviated Name
sdMeanBEPHoN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover N value when the mean

bit error probability is used as the threshold for a signal quality
handover on SDCCH.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
sdBepHoControl,sdMeanBEPHoP
P<N
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1366
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.25.70 Handover Threshold of CV Bit Error Probability on SDCCH

Full Name
Handover Threshold of CV Bit Error Probability on SDCCH
Abbreviated Name
sdCVBEPHoThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a threshold of the CV_BEP on SDCCH. It

is used to determine a handover based on signal quality.
The parameter value ranges from 0 to 7. CV_BEP = 0 means that
the actual CV_BEP is greater than 1.75 but smaller than 2.00.
CV_BEP = 7 means that the actual CV_BEP is greater than 0.00 but
smaller than 0.25. The larger the parameter value is, the smaller the
signal variation is. A handover is required when the signal variation
and the mean BEP are too great.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
sdBepHoControl
2-1367
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the acceptable variation
of signal quality in the actual network environment. It can be

increased if a large variation range is acceptable or decreased if a
small variation range is acceptable.
Reason
accepted.
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.25.71 Handover P Number of CV Bit Error Probability on SDCCH

Full Name
Handover P Number of CV Bit Error Probability on SDCCH
Abbreviated Name
sdCVBEPHoP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover P value when the CV bit

error probability is used as an auxiliary threshold for a signal quality
handover on SDCCH.
Instance
Cell
Related FG

2-1368
SJ-20140527134815-013|2015-03-10(R1.1)
1..20
Unit
N/A
Default Value
Related Parameters
sdBepHoControl,sdCVBEPHoN
P<N
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.25.72 Handover N Number of CV Bit Error Probability on SDCCH

Full Name
Handover N Number of CV Bit Error Probability on SDCCH
Abbreviated Name
sdCVBEPHoN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1369
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the handover N value when the CV bit

error probability is used as an auxiliary threshold for a signal quality
handover on SDCCH.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
sdBepHoControl,sdCVBEPHoP
P<N
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
New Connection
No
Access
Read/Write
OMC Access path

N/A
2.25.73 Back to Source Cell when PBGT Handover

Full Name
Back to Source Cell when PBGT Handover
Abbreviated Name
PBGTHoBacktoSource
Managed Object
2-1370
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to turn on/off the handover Access

level requirement switch for PBGT handovers. If the electricity level
does not meet the requirement, the PHY Info is not delivered,
therefore the handover fails and the MS returns to the source
channel.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter can be set to "Yes" when the MS is expected to
return to the source channel in the case of PBGT handover failure

on the TCH.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-1371
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.74 Back to Source Cell when Other

Handover
Full Name
Back to Source Cell when Other

Handover
Abbreviated Name
OtherHoBacktoSource
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to turn on/off the handover Access

level requirement switch for non-PBGT handovers. If the electricity
level does not meet the requirement, the PHY Info is not delivered,
therefore the handover fails and the MS returns to the source
channel.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to "Yes" when the MS is expected
to return to the source channel when the handover (not PBGT

handover) fails on the TCH.
Reason
Change take effect
No
0
2-1372
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.25.75 HoAccess Require Rxlevel offset

Full Name
HoAccess Require Rxlevel offset
Abbreviated Name
HoAccessReqLevOffset
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to perform the back-to-source-cell

function after the expected uplink level is compared with
the handover Acess level. Expected uplink level = (110TargetAverageRxLevel + LinkBalance + (HoAccessReqLevOffset
-35)).
TargetAverageRxLevel means the latest level of the target cell in the
case of an inter-cell handover or a handover made from an external
BSC, or the downlink Rxlevel carried in the case of an intra-cell
handover or assignment.
LinkBalance is the balance value between uplink and downlink.
LinkBalance = BTS actual transmit power HS transmit power.
HoAccessReqLevOffset means the handover requirement level
offset.
Instance
Cell
Related FG
0..70
Unit
dB
Default Value
45
Related Parameters
OtherHoAccessLevSel
This parameter is effective when the parameter OtherHoAc-
Parameters
cessLevSel is set to 2.
2-1373
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reduce the level requirement for handover detection.
The value 45 means an offset of 10 db, which is usually taken by
Reason
default with the uplink and downlink link balance considered.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.25.76 HoAccess Require Rxlevel Select

Full Name
HoAccess Require Rxlevel Select

Abbreviated Name
OtherHoAccessLevSel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1374
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Other handover types refer to those other than PBGT. A

back-to-source-cell judgment for a non-PBGT handover can be
made based on policy 1 "Expected uplink level" or policy 2 "Allowed
minimum access level".
Formula of policy 1 "Expected uplink level": (110TargetAverageRxLevel + LinkBalance + (HoAccessReqLevOffset
-35));
Formula of policy 2 "Allowed minimum access level": (110RxLevAccessMin)
TargetAverageRxLevel means the latest level of the target cell in the
case of an inter-cell handover or a handover made from an external
BSC, or the downlink Rxlevel carried in the case of an intra-cell
handover or assignment.
LinkBalance is the balance value between uplink and downlink.
LinkBalance = BTS actual transmit power HS transmit power.
RxLevAccessMin is the allowed minimum access level.
Instance
Cell
Related FG
1: Expected uplink level

2: Minimum allowed access level
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended if the SD handover success rate
increases and the SD call drop rate decreases when policy one is
used for decision of returning to the source channel in handover. If
these two performance indicators degrade, this parameter can be
adjusted to policy two and the effect must be observed.
By default, policy 1 is applied to accurately estimate the uplink level
Reason
for other types of handover.
Change take effect
No
2-1375
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.25.77 Back to Source Cell when MSC Controlled Incoming

Handover
Full Name
Back to Source Cell when MSC Controlled Incoming Handover
Abbreviated Name
MSCHoInHoBack2Source
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables/disables the back-to-source-cell function

when TCH incoming handover is performed. That is, whether to
set requirements on handover Access level for incoming HO. PHY
Info is not delivered if the condition is not met and in this case, the
MS returns to its source channel.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1376
SJ-20140527134815-013|2015-03-10(R1.1)
This function can be enabled if the call drop rate is too high. It is
not recommended normally because during an incoming handover,

the original cell is not informed of MS' successful returning to the
source channel and therefore the handover-related indexes of the
original cell can be affected.
This function is enabled only when the call drop rate has to be
Reason
lowered. It's 0 by default.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.25.78 Good level and bad quality handover enable

Full Name
Good level and bad quality handover enable
Abbreviated Name
GoodLevBadRQHoEnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter describes whether this cell supports good level and
bad quality handover. If the bad quality handover is determined
successfully but there is not a candidate cell, the system determines
whether to enable the high level and bad quality handover.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
2-1377
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
GoodLevBadRQoffSet,GoodLevBadRQHoDLLev
Parameters
handover function.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled if drive tests show many call drops
caused by TCH's good level and bad quality. Observe the call
drop rate after the function is enabled. Disable the function
again if the call drop rate deteriorates, or adjust parameters
GoodLevBadRQoffSet and GoodLevBadRQHoDLLev.
By default, the handover due to good level and bad quality is
Reason
disabled.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.25.79 Good level and bad quality handover DL Level

Full Name
Good level and bad quality handover DL Level
Abbreviated Name
GoodLevBadRQHoDLLev
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
the downlink level of this cell is higher than this parameter.
Instance
Cell
2-1378
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
30
Related Parameters
GoodLevBadRQoffSet,GoodLevBadRQHoEnable
Parameters
handover function.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
the downlink level of this cell is higher than -80dB.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.25.80 HoAccess Require CI

Full Name
HoAccess Require CI
Abbreviated Name
HoAccessReqCI
Managed Object

3GPP Name
N/A
2-1379
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
Applies to the case of returning to the source channel upon handover

failure. Set a proper CI threshould according to the CI actually used
so that a handover with the CI above the threshold can be accessed
and a handover with the CI below the threshold will be returned.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
12
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Enable the function of returning to the source channel. Set a proper
value of this threshold according to the CI used in tests.
According to the lab data, demodulated signals of NB are bad when
Reason
the Rx signals CI is smaller than 12.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.25.81 SD signal quality handover with cv_bep

Full Name
SD signal quality handover with cv_bep
2-1380
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
SDCVBEPHoControl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether CV_BEP is considered for a

signal-quality-based handover on the SDCCH.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
[0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
This function is disabled by default. If a signal-quality-based
handover on the SDCCH is required, this function is enabled. Both

the MEAN_BEP and CV_BEP parameters are used for handover
decision.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-1381
SJ-20140527134815-013|2015-03-10(R1.1)
2.25.82 SD Handover Threshole of Mean Bit Error Probability High

Full Name
SD Handover Threshole of Mean Bit Error Probability High
Abbreviated Name
SDMeanBEPHoThsHigh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the high threshold of MEAN_BEP when

CV_BEP is considered for a signal-quality-based handover on the
SDCCH.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
24
Related Parameters
SDMeanBEPHoThs
SDMeanBEPHoThsHigh>=SDMeanBEPHoThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The experimental value is recommended. The value can be fine
tuned based on the signal quality in actual situations.
When CV_BEP is considered for a signal-quality-based handover
Reason
on the SDCCH, the MEAN_BEP affect should also be considered.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
2-1382
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.26 VAMOS Configuration(GVamos)

2.26.1 VAMOS Configuration ID
Full Name
VAMOS Configuration ID
Abbreviated Name
GVamosId
Managed Object
VAMOS Configuration(GVamos)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a VAMOS configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
2-1383
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Restricted
OMC Access path

Information Configuration->VAMOS Configuration
N/A
2.26.2 If support VAMOS

Full Name
If support VAMOS
Abbreviated Name
SupportVAMOS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports the VAMOS

function.
The Voice Services over Adaptive Multi-user channels on One Slot
(VAMOS) technology multiplexes multiple voice subscribers on one
ARFCN and one timeslot to improve the network capacity. The
following types are available:
Two FR subscribers multiplex one timeslot.
One FR subscriber and two HR subscribers multiplex one timeslot.
Three HR subscribers multiplex one timeslot.
Four HR subscribers multiplex one timeslot.
Instance
Cell
Related FG
0: not support VAMOS

1: support VAMOS pair by handover
2: support VAMOS pair by assignment
3: support VAMOS pair by handover and assignment
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1384
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the operator does not want to expand the existing radio resources
in areas with high traffic, enable the VAMOS function to improve

the network capacity.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.26.3 If support MUTE SAIC detection

Full Name
If support MUTE SAIC detection
Abbreviated Name
muteSaicDetect
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports MUTE SAIC

detection.
Some SAIC MSs report themselves as common MSs. The network
side can add an interference signal to the voice signals and check
the quality to determine the MS's capability. At the initial stage of
VAMOS application, not too many VAMOS MSs are used in the
existing network. SAIS MS pairing is a good method to improve
the network capacity.
Instance
Cell
2-1385
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Set this parameter as required by the operator. Before enabling
VAMOS, turn on the MUTE SAIC detection switch to detect the

capabilities of the on-site MSs.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.26.4 If support SAIC AFC detection

Full Name
If support SAIC AFC detection
Abbreviated Name
saicAfcDetect
Managed Object
3GPP Name
N/A
2-1386
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports SAIC AFC

detection.
Some MSs, for example, some NOKIA MSs, report themselves as
SAIC MSs, but the frequency offset correction is improper. The
network side can add an interference signal to the voice signals and
check the frequency offset and quality to determine whether the MS
has problems. Different parameters can be used during a VAMOS
pairing process to reduce the pairing failure rate.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Set this parameter as required by the operator. Before enabling
VAMOS, turn on the SAIC AFC detection switch to detect the

capabilities of the on-site MSs.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1387
SJ-20140527134815-013|2015-03-10(R1.1)
2.26.5 The priority level of VAMOS pairing

Full Name
The priority level of VAMOS pairing
Abbreviated Name
priorLevelOfPair
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies a priority level threshold for VAMOS

pairing.
For subscribers with high priorities, pairing measures may not
be used so that the voice quality can be ensured, if the operator
requires.
If the VAMOS function is enabled, only subscribers with the priorities
lower than the threshold are paired.
Instance
Cell
Related FG
ZGO-04-05-006 VAMOS Pairing Based on User Priority
1..14
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, all subscribers can be paired. If the operator has special
requirements, adjust the parameter setting.
By default, pairing is allowed for all subscribers.
Reason
Change take effect
No
Access
Read/Write
2-1388
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.26.6 The load of start VAMOS FR pairing

Full Name
The load of start VAMOS FR pairing
Abbreviated Name
frPairLoadThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the load threshold for the channel with
the VAMOS FR pairing enabled. When the cell load exceeds this
threshold, the system triggers FR pairing.
Instance
Cell
Related FG
20..100
Unit
Default Value
40
Related Parameters
HRPairLoadThr
FRPairLoadThr <= HRPairLoadThr
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A large value indicates a low probability for initiating FR pairing and
a large congestion probability of the cell.

A small value indicates a high probability for initiating FR pairing.
The added VAMOS pairing increases interference to the system.
When the load of the cell reaches 40%, VAMOS FR pairing can be
Reason
performed to improve the system capacity and avoid congestion.
Change take effect
2-1389
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.26.7 The load of start VAMOS HR pairing

Full Name
The load of start VAMOS HR pairing
Abbreviated Name
hrPairLoadThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the load threshold for the channel with
the VAMOS HR pairing enabled. When the cell load exceeds this
threshold, the system triggers FR or HR pairing.
Instance
Cell
Related FG
20..100
Unit
Default Value
80
Related Parameters
FRPairLoadThr
FRPairLoadThr <= HRPairLoadThr
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1390
SJ-20140527134815-013|2015-03-10(R1.1)
A large value indicates a low probability for initiating HR pairing and
a large congestion probability of the cell.

A small value indicates a high probability for initiating HR pairing.
The added VAMOS pairing increases interference to the system.
When the load of the cell reaches 80%, the cell is considered to
Reason
be busy and VAMOS HR pairing can be performed to improve the

system capacity.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.26.8 The level threshold of Vamos pairing

Full Name
The level threshold of Vamos pairing
Abbreviated Name
LevThrOfPair
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of Rx level for VAMOS

pairing.
When two users are multiplexed in the same timeslot, the Rx quality
and Rx level of both users must meet specific requirements to
ensure proper operation after they are paired and prevent impacts
on the other users in the system.
Instance
Cell
Related FG
ZGO-04-05-004 VAMOS Pairing Based on Signal Level and Quality
0..63
Unit
N/A
2-1391
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A large parameter value indicates a high Rx level required for users
before pairing, which makes VAMOS pairing more difficult.

A small parameter value indicates low Rx level required for users
before pairing, which increases the probability of pair breaking or
call drop after VAMOS pairing.
Generally, an Rx level higher than -80 dB can ensure successful
Reason
pairing without causing pair breaking or call drop.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.26.9 The quality threshold of Vamos pairing

Full Name
The quality threshold of Vamos pairing
Abbreviated Name
QualThrOfPair
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1392
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the threshold of Rx quality for VAMOS

pairing.
When two users are multiplexed in the same timeslot, the Rx quality
and Rx level of both users must meet the specific requirements to
ensure proper operation after they are paired and prevent impacts
on the other users in the system.
Instance
Cell
Related FG
ZGO-04-05-004 VAMOS Pairing Based on Signal Level and Quality
0..70
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A large parameter value indicates high Rx quality required for users
before pairing, which makes VAMOS pairing more difficult.

A small parameter value indicates low Rx quality required for users
before pairing, which increases the probability of pair breaking or
call drop after VAMOS pairing.
Generally, Rx quality lower than 1 can ensure successful pairing
Reason
without causing pair breaking or call drop.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1393
SJ-20140527134815-013|2015-03-10(R1.1)
2.26.10 The pass loss ratio of candidates

Full Name
The pass loss ratio of candidates
Abbreviated Name
PassLossRatio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of path loss ratio for VAMOS
pairing.
A good effect can be achieved after two users with similar path loss
are paired.
Instance
Cell
Related FG
ZGO-04-05-005 VAMOS Pairing Based on Path Loss
0..100
Unit
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A large parameter value indicates a high path loss ratio required for
users before pairing, which makes VAMOS pairing more difficult.

A small parameter value indicates a low path loss ratio required for
users before pairing, which increases the probability of pair breaking
or call drop due to very different radio conditions.
Generally, two users with path loss ratio lower than 10% have similar
Reason
radio conditions and can be more easily paired successfully.
Change take effect
No
Access
Read/Write
2-1394
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.26.11 The expected received level

Full Name
The expected received level
Abbreviated Name
ExpectedLev
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the expected Rx level after VAMOS pairing.

It is the lowest downlink Rx level required for the paired users.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter is adjusted to a larger value, higher downlink Rx
level is required after pairing and a higher power is required, which

makes VAMOS pairing less likely to succeed.
If the parameter is adjusted to a smaller value, a lower downlink Rx
level is required after pairing, which makes VAMOS pairing more
likely to succeed but increases the probability of pair breaking or
call drop after the pairing.
2-1395
SJ-20140527134815-013|2015-03-10(R1.1)
Generally, the paired users can only complete a call normally when
Reason
the downlink Rx level is higher than -100 dB.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.26.12 The uplink SCPIR threshold

Full Name
The uplink SCPIR threshold
Abbreviated Name
SCPIR_Up
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
SubChannel Power Imbalance Ratio (SCPIR) is the power ratio

between two MSs. This parameter indicates the threshold of the
uplink SCPIR between an MS with lower power and an MS with
higher power. Two MSs can be properly paired only when the uplink
SCPIR between them is higher than this threshold.
Instance
Cell
Related FG
15: 0
16: 1
17: 2
18: 3
19: 4
20: 5
21: 6
22: 7
23: 8
24: 9
2-1396
SJ-20140527134815-013|2015-03-10(R1.1)
25: 10
26: 11
27: 12
28: 13
29: 14
30: 15
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the parameter value is, the higher SCPIR is required
between two MSs to be paired, which makes VAMOS pairing more

difficult.
The smaller the parameter value is, the lower SCPIR is required
The best effect can be achieved for two paired MSs when the uplink
Reason
SCPIR between them is higher than 10.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.26.13 The downlink SCPIR threshold of NON-SAIC MS

2-1397
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
The downlink SCPIR threshold of NON-SAIC MS
Abbreviated Name
SCPIR_Dn_NoSaic
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

downlink SCPIR between a non-SAIC MS and an MS to be paired.
An MS can be paired with a non-SAIC MS only when the downlink
SCPIR between the SAIC MS and the MS is higher than this
threshold.
Instance
Cell
Related FG
21: 6
22: 7
23: 8
24: 9
25: 10
26: 11
27: 12
28: 13
29: 14
30: 15
Unit
N/A
Default Value
21
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1398
SJ-20140527134815-013|2015-03-10(R1.1)
between two MSs to be paired, which makes VAMOS pairing less

likely to succeed.
The best effect can be achieved for two paired MSs when the
Reason
downlink SCPIR between them is higher than 6.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.26.14 The downlink SCPIR threshold of SAIC MS

Full Name
The downlink SCPIR threshold of SAIC MS
Abbreviated Name
SCPIR_Dn_Saic
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

downlink SCPIR between an SAIC MS and an MS to be paired. An
MS can be paired with an SAIC MS only when the downlink SCPIR
between the SAIC MS and the MS is higher than this threshold.
Instance
Cell
Related FG
2-1399
SJ-20140527134815-013|2015-03-10(R1.1)
11: -4
12: -3
13: -2
14: -1
15: 0
16: 1
17: 2
18: 3
19: 4
20: 5
21: 6
22: 7
23: 8
24: 9
25: 10
26: 11
27: 12
28: 13
29: 14
30: 15
Unit
N/A
Default Value
11
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

likely to succeed.
Reason
downlink SCPIR between them is higher than -4.
Change take effect
No
2-1400
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.26.15 The downlink SCPIR threshold of SAIC AFC MS

Full Name
The downlink SCPIR threshold of SAIC AFC MS
Abbreviated Name
SCPIR_Dn_SaicAfc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

downlink SCPIR between an SAIC AFC MS and an MS to be
paired. An MS can be paired with an SAIC AFC MSs only when the
downlink SCPIR between the SAIC AFC MS and the MS is higher
than this threshold.
Instance
Cell
Related FG
15: 0
16: 1
17: 2
18: 3
19: 4
20: 5
21: 6
22: 7
23: 8
24: 9
25: 10
26: 11
27: 12
2-1401
SJ-20140527134815-013|2015-03-10(R1.1)
28: 13
29: 14
30: 15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

likely to succeed.
Reason
downlink SCPIR between them is higher than 0.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.26.16 The downlink SCPIR threshold of VAMOS I MS

Full Name
The downlink SCPIR threshold of VAMOS I MS
Abbreviated Name
SCPIR_Dn_VAMOSI
2-1402
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

downlink SCPIR between a VAMOS-I MS and an MS to be paired.
An MS can be paired with a VAMOS-I MS only when the downlink
SCPIR between the VAMOS-I MS and the MS is higher than this
threshold.
Instance
Cell
Related FG
11: -4
12: -3
13: -2
14: -1
15: 0
16: 1
17: 2
18: 3
19: 4
20: 5
21: 6
22: 7
23: 8
24: 9
25: 10
26: 11
27: 12
28: 13
29: 14
30: 15
Unit
N/A
Default Value
11
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1403
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No

likely to succeed.
Reason
downlink SCPIR between them is higher than -4.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.26.17 The downlink SCPIR threshold of VAMOS II MS

Full Name
The downlink SCPIR threshold of VAMOS II MS
Abbreviated Name
SCPIR_Dn_VAMOSII
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

downlink SCPIR between a VAMOS-II MS and an MS to be paired.
An MS can be paired with a VAMOS-II MS only when the downlink
SCPIR between the VAMOS-II MS and the MS is higher than this
threshold.
Instance
Cell
Related FG

2-1404
SJ-20140527134815-013|2015-03-10(R1.1)
5: -10
6: -9
7: -8
8: -7
9: -6
10: -5
11: -4
12: -3
13: -2
14: -1
15: 0
16: 1
17: 2
18: 3
19: 4
20: 5
21: 6
22: 7
23: 8
24: 9
25: 10
26: 11
27: 12
28: 13
29: 14
30: 15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1405
SJ-20140527134815-013|2015-03-10(R1.1)

likely to succeed.
Reason
downlink SCPIR between them is higher than-10.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.26.18 Support VAMOS II

Full Name
Support VAMOS II
Abbreviated Name
SupportVAMOSII
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Currently VAMOS II MSs is not put into commercial use. The switch
is designed to control the Pairing and De-Pairing on VAMOS II MSs.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
2-1406
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Status of this switch depends on test results of the candidate site.
Currently VAMOS II MSs is not commercially released and there is
Reason
no specific pairing data available. For this reason, no pairing should

be done at this moment.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.19 P value of pair process

Full Name
P value of pair process
Abbreviated Name
PairProcessP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
During subscriber pairing, this parameter checks the two P values of

the two subscribers satisfying the pairing conditions.
Instance
Cell
Related FG
2-1407
SJ-20140527134815-013|2015-03-10(R1.1)
1..20
Unit
N/A
Default Value
Related Parameters
PairProcessN
PairProcessN>=PairProcessP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too small, there will be too frequent pairings because
the pairing judgment is easy to make;

If the value is too large, the pairing condition is too hard to meet.
Reason
pairing.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.20 N value of pair process

Full Name
N value of pair process
Abbreviated Name
PairProcessN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1408
SJ-20140527134815-013|2015-03-10(R1.1)
Description
During subscriber pairing, this parameter checks the two N values

of the two subscribers satisfying the pairing conditions.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
PairProcessP
PairProcessN>=PairProcessP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate pairing judgment;

If the value is too large, the channel resource will be consumed
much as it takes long to make a pairing judgment.
Reason
pairing.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.21 The downlink SCPIR threshold of MUTE SAIC MS

Full Name
The downlink SCPIR threshold of MUTE SAIC MS
Abbreviated Name
SCPIR_Dn_MuteSaic
2-1409
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
SCPIR (SubChannel Power Imbalance Ratio) is the power ratio

of two subscribers. This parameter specifies the downlink SCPIR
threshold for a MUTE SAIC MS. The MUTE SAIC MSs are suitable
for pairing only if their downlink SCPIRs are greater than this
parameter.
Instance
Cell
Related FG
11: -4
12: -3
13: -2
14: -1
15: 0
16: 1
17: 2
18: 3
19: 4
20: 5
21: 6
22: 7
23: 8
24: 9
25: 10
26: 11
27: 12
28: 13
29: 14
30: 15
Unit
N/A
Default Value
11
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1410
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
If the value is large, high SCPIR is required for pairing users and
pairing will be hard to make;

If the value is small, low SCPIR is required for pairing users and
pairing will be easy to make, but de-pairing and call drop will be
very probable after the pairing.
The best pairing effect can be achieved if the downlink SCPIR is
Reason
above -4.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.22 The load of VAMOS pair release

Full Name
The load of VAMOS pair release
Abbreviated Name
PairReleaseLoadThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the load threshold for the channel with the
VAMOS pairing release enabled. When the cell load falls below this
threshold, the system initiates the VAMOS pairing release process.
Instance
Cell
Related FG
0..80
Unit
Default Value
20
Related Parameters
FRPairLoadThr
2-1411
SJ-20140527134815-013|2015-03-10(R1.1)
PairReleaseLoadThr<=(FRPairLoadThr-20)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too large, cell load will not be lessened. If the value
is too small, voice quality and system performance will not be

improved.
A balance should be made among cell load, voice quality and
Reason
system performance.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.23 Support handover from VAMOS FR to VAMOS HR

Full Name
Support handover from VAMOS FR to VAMOS HR
Abbreviated Name
SupportVamosHO
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the system triggers a handover

from VAMOS FR to VAMOS HR due to continuously high load after
the VAMOS FR is paired.
Instance
Cell
Related FG
2-1412
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
No modification is recommended unless otherwise required.
For a handover from VAMOS FR to VAMOS HR that happens to
Reason
two MSs at the same time, the system performance can be easily
affected.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.24 Support pair release due to quality

Full Name
Support pair release due to quality
Abbreviated Name
PairReleaseOfQual
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1413
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines whether pair release due to quality

is supported after VAMOS pairing is done. If the subscriber
deteriorates in quality during the pairing process to above the
de-pairing threshold, then the depairing process is initiated so that
the two can be depaired as soon as possible to maintain the call.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
No modification is recommended.
When the voice quality of paired MSs decreases to a certain
Reason
threshold, call drop occurs if they are not depaired promptly.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.25 Uplink receive quality of pair-release threshold

Full Name
Uplink receive quality of pair-release threshold

2-1414
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
PairRelUlQuaThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink quality threshold for pair release.
If one of the subscriber's uplink quality is above this parameter, then
the depairing process is initiated.
Instance
Cell
Related FG
0..70
Unit
N/A
Default Value
39
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too large, the poor voice quality will affect user
experience and call drops will be caused. If the value is too small,
frequent de-pairing will be caused and system performance will be
affected.
The voice quality is acceptable if it is higher than this threshold.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-1415
SJ-20140527134815-013|2015-03-10(R1.1)
2.26.26 Downlink receive quality of pair-release threshold

Full Name
Downlink receive quality of pair-release threshold
Abbreviated Name
PairRelDlQuaThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink quality threshold for pair

release. If one of the subscriber's downlink quality is better than this
parameter, then the depairing process is initiated.
Instance
Cell
Related FG
0..70
Unit
N/A
Default Value
39
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too large, the poor voice quality will affect user
experience and call drops will be caused. If the value is too small,
frequent de-pairing will be caused and system performance will be
affected.
The voice quality is acceptable if it is higher than this threshold.
Reason
Change take effect
No
Access
Read/Write
2-1416
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.27 P value of pair-release uplink quality

Full Name
P value of pair-release uplink quality
Abbreviated Name
PairRelUlQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the P value of uplink quality for pair release.
The pair release is initiated if one of the pairing subscribers has P
out of N average uplink signal quality values meeting the threshold.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
PairRelUlQualN
PairRelUlQualN>=PairRelUlQualP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too small, there will be too frequent depairings
because the depairing judgment is easy to make;

If the value is too large, the depairing condition is too hard to meet.
Reason
depairing.
Change take effect
2-1417
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.28 N value of pair-release uplink quality

Full Name
N value of pair-release uplink quality
Abbreviated Name
PairRelUlQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the N value of uplink quality for pair

release.
The pair release is initiated if one of the pairing subscribers has P
out of N average uplink signal quality values meeting the threshold.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
PairRelUlQualP
PairRelUlQualN>=PairRelUlQualP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1418
SJ-20140527134815-013|2015-03-10(R1.1)
accurate depairing judgment;

If the value is too large, call drops will be easily caused as it takes
long to complete a depairing process.
Reason
depairing.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.29 P value of pair-release downlink quality

Full Name
P value of pair-release downlink quality
Abbreviated Name
PairRelDlQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the P value of downlink quality for pair

release.
The pair release is initiated if one of the pairing subscribers has P out
of N average downlink signal quality values meeting the threshold.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
PairRelDlQualN
2-1419
SJ-20140527134815-013|2015-03-10(R1.1)
PairRelDlQualN>=PairRelDlQualP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too small, there will be too frequent depairings
because the depairing judgment is easy to make;

If the value is too large, the depairing condition is too hard to meet.
Reason
depairing.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.30 N value of pair-release downlink quality

Full Name
N value of pair-release downlink quality
Abbreviated Name
PairRelDlQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the N value of downlink quality for pair

release.
The pair release is initiated if one of the pairing subscribers has P out
of N average downlink signal quality values meeting the threshold.
Instance
Cell
Related FG

2-1420
SJ-20140527134815-013|2015-03-10(R1.1)
1..20
Unit
N/A
Default Value
Related Parameters
PairRelDlQualP
PairRelDlQualN>=PairRelDlQualP
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate depairing judgment;

If the value is too large, call drops will be easily caused as it takes
long to complete a depairing process.
Reason
depairing.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.31 VAMOS Pair Selecting

Full Name
VAMOS Pair Selecting
Abbreviated Name
PairOfFrAndHr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1421
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This is a VAMOS-related parameter that determines whether this

cell supports FR+FR pairs or FR+HR pairs.
0: Not support F+F or F+H
1: Support F+F
2: Support F+H
3: Support F+F and F+H
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is subject to adjustment as required by the customer.
By default, all pairing modes are allowed, which improves the
Reason
channel utilization.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.32 P value of MS capability predetect

Full Name
P value of MS capability predetect

2-1422
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
MsPreDetP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This is the capability detection parameter of VAMOS MSs. It refers to

the P value used for quality and level determination before detection.
Instance
Cell
Related FG
ZGO-04-05-007 Detection of Mute-SAIC Mobile Stations;

Problem
3..15
Unit
N/A
Default Value
Related Parameters
MsPreDetN
MsPreDetP<=MsPreDetN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A big value is recommended as the bigger it is, the stricter the
detection becomes.
By default, it is an optimal test value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-1423
SJ-20140527134815-013|2015-03-10(R1.1)
2.26.33 N value of MS capability predetect

Full Name
N value of MS capability predetect
Abbreviated Name
MsPreDetN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This is the capability detection parameter of VAMOS MSs. It refers

to the N value used for quality and level determination before
detection.
Instance
Related FG
Cell
Problem
3..20
Unit
N/A
Default Value
Related Parameters
MsPreDetP
MsPreDetP<=MsPreDetN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A big value is recommended as the bigger it is, the stricter the
detection becomes.
Reason
Change take effect
No
Access
Read/Write
2-1424
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.34 High level threshold of MS capability detect

Full Name
High level threshold of MS capability detect
Abbreviated Name
MsDetHighLev
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used for the detection of VAMOS capability. It

indicates the upper threshold of downlink Rx level. Before the
VAMOS capability detection on an MS, the downlink Rx level of the
MS must be lower than this threshold.
Instance
Cell
Related FG

Problem
47..85
Unit
N/A
Default Value
75
Related Parameters
MsDetPwrC
PwrControlDl
This parameter is set to 47 when the MsDetPwrC switch is turned off.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is used when the MsDetPwrC switch is turned on.
If the MsDetPwrC switch is turned off, this parameter is set to 47,

meaning that this parameter is not used.
2-1425
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is set to ensure an accurate detection result.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.35 Low level threshold of MS capability detect

Full Name
Low level threshold of MS capability detect
Abbreviated Name
MsDetLowLev
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This is the capability detection parameter of VAMOS MSs. It refers

to the lower threshold that the downlink Rx level of MSs must meet
before detection, that is, the level of MSs should be higher than the
threshold to meet the condition.
Instance
Related FG
Cell
Problem
70..111
Unit
N/A
Default Value
85
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1426
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
This value should better remain unchanged.
The test result of MS capability is accurate in the default range.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.36 the level power control switch of MS capability detect

Full Name
the level power control switch of MS capability detect
Abbreviated Name
MsDetPwrC
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used for the detection of VAMOS capability. It

determines whether the power of an MS is controlled to a level
between the upper and lower thresholds so that the VAMOS
capability of the MS can be detected.
Instance
Cell
Related FG

Problem
0: No
1: Yes
2-1427
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is recommended to enable the power control for VAMOS capability
detection.
The default value is set to ensure an accurate detection result.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.37 SAIC AFC power control switch

Full Name
SAIC AFC power control switch
Abbreviated Name
PwrCOfSaicAfc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This is the VAMOS power control parameter. This parameter

controls the pairing of AFC MSs, that is, it determines whether to
use a particular power control method for AFC MSs.
2-1428
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
ZGO-04-05-002 VAMOS Power Control
0: Not use AFC power control

1: Use AFC power control
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Status of this function depends on the effect of on-site verification.
It is a new AFC power control method, which is disabled temporarily.
Reason
It is enabled when necessary.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.38 the period of SAIC AFC power control

Full Name
the period of SAIC AFC power control
Abbreviated Name
PwrCTimeOfSaicAfc
Managed Object
3GPP Name
N/A
2-1429
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This is the VAMOS power control parameter. It refers to the interval

of SAIC AFC power control. It is the burst value of +SCPIR and
-SCPIR.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.39 the alpha value of SAIC AFC power control

Full Name
the alpha value of SAIC AFC power control
Abbreviated Name
PwrCAlphaOfSaicAfc
2-1430
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This is the VAMOS power control parameter. It refers to SCPIR

value used for SAIC AFC power control.
Instance
Cell
Related FG
1..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.26.40 AFC detect switch of MUTE SAIC

2-1431
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
AFC detect switch of MUTE SAIC
Abbreviated Name
AfcDtectOfMuteSaic
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This is the capability detection parameter of VAMOS MSs. It

determines whether to implement AFC detection for the MSs whose
detection result is "muteSAIC".
Instance
Cell
Related FG

Problem
0: Not detect
1: Detect
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This switch should better be turned On.
Further detection is required because an AFC problem maybe exist
Reason
in the MSs whose detection result is "muteSAIC".
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-1432
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.27 UTRAN Measurement(GUtranMeasure)

2.27.1 UTRAN Measurement ID
Full Name
UTRAN Measurement ID
Abbreviated Name
GUtranMeasureId
Managed Object
UTRAN Measurement(GUtranMeasure)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a UTRAN measurement ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
2-1433
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Restricted
OMC Access path

Information Configuration->UTRAN Measurement
N/A
2.27.2 Require UE to send UTRAN class-mark change message

early
Full Name
Require UE to send UTRAN class-mark change message early
Abbreviated Name
ecsc_3g
Managed Object
3GPP Name
3G Early Classmark Sending Restriction(44.018)
3GPP Reference
N/A
Description
This parameter indicates whether a UE is required to send a UTRAN

classmark change message as early as possible after accessing
a network.
Instance
Cell
Related FG
0: Not allow to send "UTRAN class mark change" message

1: Both ECSC and UE control whether the UE sends "UTRAN
classmark change" message
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1434
SJ-20140527134815-013|2015-03-10(R1.1)
Enable this parameter when 2/3G handover is required. After the
switch is turned on, a UE sends a UE UTRAN classmark change

message prior to being handed over from 3G to 2G. In this way, the
network can get information about the UE capability in advance.
Enable this parameter only when 2/3G handover is required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.3 Channel location of si2quater broadcast

Full Name
Channel location of si2quater broadcast
Abbreviated Name
si2quaterPos
Managed Object
3GPP Name
SI2quater_POSITION
3GPP Reference
N/A
Description
This parameter indicates whether the SI2quater message is

broadcast on BCCH or extended BCCH.
Instance
Cell
Related FG

Handover
0: Broadcast on normal BCCH block

1: Broadcast on extended BCCH block ,AGCH_BLOCK reservation
value will be 1
Unit
N/A
Default Value
2-1435
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
BsAgBlkRes
If this parameter is set to broadcast on extended BCCH, the
Parameters
subsequent radio blocks will be occupied. Therefore, the

BsAgBlkRes reservation value should be at least 1.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The transmission speed is fast on BCCH extended blocks but AGCH
reservation blocks need to be used, which occupies PCH/AGCH

resources.
Traditionally, the SI2quater message is sent on BCCH. To send the
Reason
SI2quater message on extended BCCH, AGCH reservation blocks

must be configured first.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.4 CS measurement type reported by UE

Full Name
CS measurement type reported by UE
Abbreviated Name
reportTypeCS
Managed Object
3GPP Name
REPORT_TYPE
3GPP Reference
N/A
Description
This parameter indicates the report type that a UE uses, enhanced

measurement report or common measurement report.
Instance
Cell
2-1436
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Handover
0: enhanced measurement report

1: normal measurement report
Unit
N/A
Default Value
Related Parameters
N/A
If R_3GBTS.ReportTypeCS is set to 1 (common measurement
Parameters
report), the following restrictions must be met:

The number of GSM cells for reselection and those for handover
and reselection in the same cell cannot exceed 64.
The number of GSM cells for handover and those for handover and
reselection in the same cell cannot exceed 64.
If R_3GBTS.ReportTypeCS is set to 0 (enhanced measurement
report), the following restrictions must be met:
The number of GSM cells for reselection and those for
handover and reselection in the same cell cannot exceed
R_3GBTS.IndexStartEMR.
The number of GSM cells for handover and those for
handover and reselection in the same cell cannot exceed
R_3GBTS.IndexStartEMR.
All these restrictions are applicable when this cell acts as a cell for
reselection.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Enhanced measurement reports contain more neighbor cell data.
They are used only when MSs support 2G/3G.
The default value is set to common measurement report because
Reason
MSs are more compatible with this type of report.
Change take effect
No
Access
Read/Write
OMC Access path

2-1437
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.202/V6.30.202
ADD
2.27.5 CS number of same frequency adjacent cells in report

Full Name
CS number of same frequency adjacent cells in report
Abbreviated Name
svrBandRprtCS
Managed Object
3GPP Name
SERVING_BAND_REPORTING
3GPP Reference
N/A
Description
This parameter indicates the number of adjacent cells with the

same frequency band as the serving cell, which are included in the
measurement report or the strongest cell list (measurement data
in a terminal).
Instance
Related FG
Cell
Handover
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Use a larger value if a handover to a neighbor cell with the same
frequency is expected.
This default value is set based on the corresponding protocol.
Reason
Change take effect
No
2-1438
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.27.6 Measurement threshold of UE performing UTRAN cell

reselection
Full Name
Measurement threshold of UE performing UTRAN cell reselection
Abbreviated Name
qsearch_I
Managed Object
3GPP Name
Qsearch_I
3GPP Reference
N/A
Description
If the average received signal level RLA_C of the local cell is

lower than this threshold (meaning the parameter value is 0-6) or
higher than the threshold (meaning the parameter value is 8-14),
the UE starts the measurement on a UTRAN reselection cell. The
parameter value 7 means "always" and 15 means "never".
Instance
Cell
Related FG

Handover
0..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1439
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
UEs are expected to always perform inter-RAT measurement after
entering a cell that enables 2G/3G interoperation. If the 3G signal

condition meets the requirement, the UE reselects the RAT.
If GSM to 3G reselection is required, the value 7 is recommended
for the cell that is configured with inter-RAT neighbor cells. This
helps improve the 2G to 3G reselection success rate. The value 15
means that the measurement is disabled.
2G/3G networks are usually used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.27.7 FDD reselection offset

Full Name
FDD reselection offset
Abbreviated Name
fdd_Qoffset
Managed Object
3GPP Name
FDD_Qoffset
3GPP Reference
N/A
2-1440
SJ-20140527134815-013|2015-03-10(R1.1)
Description
If a UTRAN neighbor cell is switched on (the level of the 3G neighbor

cell meets FDD_Qmin) and the cell's requirement for starting
measurement (Qsearch_I) is met, a UE can reselect the UTRAN
neighbor cell when the following three conditions are met:
The received signal code power (RSCP) of this adjacent cell is
higher than the average receiving level RLA_C of this cell.
The RSCP of the adjacent cell is higher than RLA_C of all adjacent
GSM cells by at least FDD_Qoffset (FDD reselection offset) for
more than 5 seconds. FDD_Qoffset of the cell increases by 5 dB if a
GSM cell is reselected 15 seconds earlier.
The Ec/No (code-noise ratio) of this adjacent cell is larger than or
equal to the designated FDD_Qmin (minimum Ec/No of UTRAN
reselected cell).
If more than one UTRAN cell meets above conditions, then the
system selects the cell with the largest RSCP.
The value 0 means that this 3G FDD adjacent cell is always selected.
1 = -28 d;
2 = -24 dB;
...
15 = 28 dB
Instance
Cell
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
8 indicates that the offset between GSM and 3G signals is 0. It
leads to a large propagation loss because the 3G system usually

uses 2G frequency bands. The empirical value is 0, meaning that
3G signals are not considered in GSM to 3G reselection. It helps
improve the reselection rate.
No offset is used according to the corresponding protocol.
Reason
Change take effect
2-1441
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.27.8 Min Ec/No of UTRAN reselecting cell

Full Name
Min Ec/No of UTRAN reselecting cell
Abbreviated Name
fdd_Qmin
Managed Object
3GPP Name
FDD_Qmin
3GPP Reference
N/A
Description
This parameter indicates the minimum value of Ec/No of a UTRAN

cell when it reselects a neighbor cell. The value of Ec/No of the
neighbor cell should be larger than or equal to the value defined
by this parameter.
Instance
Cell
Related FG
0: -20dB
1: -6dB
2: -18dB
3: -8dB
4: -16dB
5: -10dB
6: -14dB
7: -12dB
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1442
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is a key radio parameter used in 2G to 3G cell
reselection. The recommended value is 7 (-12 dB). The thresholds

of cell reselection decision between WCDMA and GSM/GPRS,
for example, the SsearchRAT parameter of WCDMA and the
FDD_Qmin parameter of GSM/GPRS, needs to be of at least 4 dB
difference.
The value 7 helps improve the 2G to 3G cell reselection success
rate.
A median value
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

qsearch_C
Full Name
Initial parameter instead of qsearch_c before UE receiving

qsearch_C
Abbreviated Name
qsearchCInit
Managed Object
3GPP Name
Qsearch_C_Initial
3GPP Reference
N/A
2-1443
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is used to search and measure cells if the MS does

not receive Qsearch_C on SACCH.
Instance
Cell
Related FG

Handover
0: Qsearch_I
1: ,Always
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default is used generally. If UTRAN neighbor cells need to be
reported once the dedicated state is entered, set the parameter to 1.
The default value enables the parameter to be adjusted in
Reason
accordance with Qsearch_I. In addition, if Qsearch_I and

Qsearch_C are synchronized, UEs in idle state and dedicated state
can use the same standard to search and measure cells.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.10 Threshold when UE performs search under dedicated mode

2-1444
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Threshold when UE performs search under dedicated mode
Abbreviated Name
qsearch_C
Managed Object
3GPP Name
Qsearch_C
3GPP Reference
N/A
Description
This parameter defines a threshold. If the average received signal

level RLA_C of the local cell is lower than this threshold (meaning
the parameter value is 0-6) or higher than the threshold (meaning the
parameter value is 8-14), the UE starts searching for 3G adjacent
cells. The parameter value 7 means "always" and 15 means "never".
Instance
Cell
Related FG

Handover
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If GSM to 3G handovers must be supported, a value rather than
15 is recommended. If GSM to 3G handovers are not required,

set the parameter to 15.
By default, UEs do not search for 3G adjacent cells.
Reason
Change take effect
No
Access
Read/Write
2-1445
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.103/V6.30.103
N/A
2.27.11 CS class of reported quantities of UTRAN adjacent cells

Full Name
CS class of reported quantities of UTRAN adjacent cells
Abbreviated Name
fddRepQntCs
Managed Object
3GPP Name
FDD_REP_QUANT
3GPP Reference
N/A
Description
This parameter indicates whether an MS uses RSCP or Ec/No to

report measurement.
Instance
Cell
Related FG
0: RSCP, receiving power of CPICH scramble of UTRAN cell at

UE, the unit is dbm
1: Ec/No, ratio of the receiving power to thermal noise of CPICH
scramble of UTRAN cell, the unit is db
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Use the default value, or set it to 0 if the operator requires.
Ec/No is better to reflect the quality of the adjacent cells.
Reason
Change take effect
2-1446
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A

report(CS)
Full Name
Max number of UTRAN/FDD adjacent cells in measurement

report(CS)
Abbreviated Name
fddMulRatRrptCs
Managed Object
3GPP Name
XXX_MULTIRAT_REPORTING
3GPP Reference
N/A
Description
This parameter indicates the maximum number of UTRAN/FDD

adjacent cells included in a packet measurement report or list of
strongest cells (measurement data in a terminal). If UTRAN/FDD
adjacent cells are not full in a report, the vacancies are used
for GSM adjacent cells (if the TDD technology is supported, the
vacancies are used for TDD cells).
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1447
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
If the 2/3G policy is set to 3G preferred, this parameter can increase
the number of 3G neighbor cells.
The default value is set to ensure a handover to 3G.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.27.13 Measurement threshold of UE performing GPRS UTRAN

cell_0/Measurement threshold of UE performing GPRS
UTRAN cell_1
Full Name
Measurement threshold of UE performing GPRS UTRAN

cell_0/Measurement threshold of UE performing GPRS UTRAN
cell_1
Abbreviated Name
qsearch_P
Managed Object
3GPP Name
Qsearch_P
3GPP Reference
N/A
Description
Initial value. The default value is set according to the condition that
W/TD is not enabled and measurement is not enabled.
Instance
Cell
Related FG
0..15
Unit
N/A
2-1448
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
[15,15]
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is not sent in SI2quater. Even if it is broadcast in
SI2quater, it takes effect only after the PMO or PCCO message that
contains neighbor cell information is sent over PACCH. However, the
PMO or PCCO message also contains Qsearch_P. Therefore, this
parameter is sent to a UE in transmission status and takes effect. In
idle status, a UE still uses the Qsearch_I parameter. To allow UEs to
measure 3G neighbor cells all the time, set the parameter value to
7. To bar UEs from measuring 3G neighbor cells, set the parameter
value to 15. To enable measurement when the signal level of the
serving cell is lower than the threshold, set the parameter value to
16. To enable measurement when the signal level of the serving
cell is higher than the threshold, set the parameter value to 814.
Because the PS service is generally expected to select the 3G
network, it is recommended to set the parameter value to 7.
Initial value. The default value is set according to the condition that
Reason
W/TD is not enabled and measurement is not enabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.14 FDD GPRS reselection offset_0/FDD GPRS reselection

offset_1
2-1449
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
FDD GPRS reselection offset_0/FDD GPRS reselection offset_1
Abbreviated Name
fdd_Gprs_Qoffset
Managed Object
3GPP Name
FDD_GPRS_Qoffset
3GPP Reference
N/A
Description
The offset is 0 dBm, which is recommended by the corresponding

protocol.
Instance
Cell
Related FG
0..15
Unit
N/A
Default Value
[8,8]
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
For the 3G FDD neighbor cell to be always selected, set the cell
parameter to 0. When the value is smaller, the access is easier. If

the current network strategy prefers the 3G network, this parameter
value should be set to 0.
The offset is 0 dBm, which is recommended by the corresponding
Reason
protocol.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1450
SJ-20140527134815-013|2015-03-10(R1.1)
2.27.15 TDD GPRS reselection offset_0/TDD GPRS reselection

offset_1
Full Name
TDD GPRS reselection offset_0/TDD GPRS reselection offset_1
Abbreviated Name
tdd_Gprs_Qoffset
Managed Object
3GPP Name
TDD_GPRS_Qoffset
3GPP Reference
N/A
Description
The offset is 0 dBm (according to old scheme, 0 dBm is the value

recommended the corresponding protocol; according to the new
scheme, the recommended value is 90 dBm (5)).
Instance
Cell
Related FG
ZXG10-02-03-001 GSM/TD-SCDMA cell reselection and CS

handover
0..15
Unit
N/A
Default Value
[8,8]
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
If an MS complies with the old mechanism, it understands the
parameter as a relative offset. To always select a 3G TDD neighbor

cell, this cell parameter value should be set to 0. If the parameter
value is smaller, it is easier to access the cell. If the current network
strategy prefers the 3G network, this parameter value should be set
to 0. If an MS complies with the new mechanism, it understands the
parameter as an absolute offset. If the parameter value is smaller, it
is easier to access the cell.
The offset is 0 dBm (according to old scheme, 0 dBm is the value
Reason
recommended the corresponding protocol; according to the new

scheme, the recommended value is 90 dBm (5)).
Change take effect
2-1451
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.27.16 PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No

of UTRAN reselecting cell_1
Full Name
PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No of

UTRAN reselecting cell_1
Abbreviated Name
fdd_QminPs
Managed Object
3GPP Name
FDD_Qmin
3GPP Reference
N/A
Description
The median value is taken.
Instance
Cell
Related FG
0: -20dB
1: -6dB
2: -18dB
3: -8dB
4: -16dB
5: -10dB
6: -14dB
7: -12dB
Unit
N/A
Default Value
[7,7]
Related Parameters
N/A
N/A
Parameters
2-1452
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the Ec/Io value corresponding to this parameter is greater, it is
more difficult for this 3G FDD cell to be reselected. The relationship

between the parameter value and the level of reselection difficulty is
fluctuated instead of linear.
The median value is taken.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.17 FDD_QminPS Offset_0/FDD_QminPS Offset_1

Full Name
FDD_QminPS Offset_0/FDD_QminPS Offset_1
Abbreviated Name
fdd_Qmin_OffsetPs
Managed Object
3GPP Name
FDD_Qmin_Offset
3GPP Reference
N/A
Description
The offset is 0 dB.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
[0,0]
2-1453
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the offset is greater, it is easier to reselect this 3G FDD cell.
The offset is 0 dB.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.18 PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP

of UTRAN reselecting cell_1
Full Name
PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP of

UTRAN reselecting cell_1
Abbreviated Name
fdd_RscpMinPs
Managed Object
3GPP Name
FDD_RSCPmin
3GPP Reference
N/A
Description
Considering FDD_RSCPmin, the signal strength of -102 dBm is

enough for UEs to operate stably in FDD.
Instance
Cell
2-1454
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..15
Unit
N/A
Default Value
[6,6]
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter determines the lowest access level of a 3G FDD cell.
If the parameter value is larger, it is more difficult to access the cell.
Considering FDD_RSCPmin, the signal strength of -102 dBm is
Reason
enough for UEs to operate stably in FDD.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.19 Measurement report threshold of Ec/No or RSCP(PS)

Full Name
Measurement report threshold of Ec/No or RSCP(PS)
Abbreviated Name
fddRprtTho2Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

2-1455
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
ZXG10-02-03-002 GSM/WCDMA cell reselection and CS handover
0..63
Unit
N/A
Default Value
[0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
Set this parameter value according to the type of measurement
report that needs to be submitted by UEs. If UEs are required to

report RSCP, set this value to the Ec/Io threshold for not reporting.
If UEs are required to report Ec/Io, set this value to the RSCP
threshold for not reporting.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.20 CS measurement reporting rate of adjacent cell

Full Name
CS measurement reporting rate of adjacent cell
Abbreviated Name
reportRateCs
Managed Object
2-1456
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
Generally, neighbor cells can have the same reporting rate.
Instance
Cell
Related FG
0: Normal
1: Lower
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is set to 1, this neighbor cell has a low
reporting frequency, and gives its reporting opportunity to other

better cells. If the parameter value is set to 0, all neighbor cells have
the same reporting frequency. The default value is 0.
Generally, neighbor cells can have the same reporting rate.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1457
SJ-20140527134815-013|2015-03-10(R1.1)
2.27.21 CS UE report invalid cell level allowed

Full Name
CS UE report invalid cell level allowed
Abbreviated Name
invldBsicRprtCs
Managed Object
3GPP Name
INVALID_BSIC_REPORTING
3GPP Reference
N/A
Description
neighbor cells whose BCC is unknown are not configured in the

BSC and cannot be used in handover. Therefore, the parameter
value is generally "not allowed".
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
The parameter value is generally "not allowed". If you want to
observe corresponding information by using signaling tracing, you

can set the value to "allowed".

Reason

value is generally "not allowed".
Change take effect
No
Access
Read/Write
2-1458
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.27.22 MulBndRprtCS
Full Name
MulBndRprtCS
Abbreviated Name
mulBndRprtCs
Managed Object
3GPP Name
MULTIBAND_REPORTING
3GPP Reference
N/A
Description
This parameter controls the number of different adjacent cells in a

report, except those in the same frequency band as the serving cell.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In a dual-frequency network, to make the 1800M band share traffic
and ensure that MSs working in the 1800M band can hand over in
this band, you can configure 900M cells to report as many 1800M
adjacent cells as possible (set the value to 3), and configure 1800M
cells to report as few 900M adjacent cells as possible (set the
value to 1). This setting method can balance traffic and relieve
congestion, but may affect the handover success rate, call drop
rate, and coverage.
2-1459
SJ-20140527134815-013|2015-03-10(R1.1)
In a dual-frequency network, this parameter can be set 0 to limit the
Reason
traffic bearing of one frequency, that is, reporting should be based

on signal strength to treat adjacent cells in different frequency bands
equally.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.27.23 CS offset which is added when UE reports rxlev value

Full Name
CS offset which is added when UE reports rxlev value
Abbreviated Name
scaleOrdCs
Managed Object
3GPP Name
SCALE_ORD
3GPP Reference
N/A
Description
0 is normally used.
Instance
Cell
Related FG
0: 0dB
1: 10dB
2: Automatic
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1460
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
If the reporting level is high, you can set the parameter value to
1 or 2 to show the actual level.
0 is normally used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.24 GSM900M Adjacent cell reporting signal level Offset

Full Name
GSM900M Adjacent cell reporting signal level Offset
Abbreviated Name
rprtOffsetCs900
Managed Object
3GPP Name
XXX_REPORTING_OFFSET
3GPP Reference
N/A
Description
No offset is set for any frequency band or any access technology.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1461
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To hand over more frequently to GSM 900M neighbor cells, set the
parameter value higher.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.25 GSM900M Adjacent cell reporting signal level Threshold

Full Name
GSM900M Adjacent cell reporting signal level Threshold
Abbreviated Name
rprtThoCs900
Managed Object
3GPP Name
XXX_REPORTING_THRESHOLD
3GPP Reference
N/A
Description
The reporting of GSM 900M neighbor cells is not restricted by

measured values.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
2-1462
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To report more GSM 900M neighbor cells, set the threshold lower.
Otherwise, set the threshold higher.
Reason
measured values.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
rprtOffsetCs1800
Managed Object
3GPP Name
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
0
2-1463
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
rprtThoCs1800
Managed Object
3GPP Name
3GPP Reference
N/A
Description

measured values.
Instance
Cell
Related FG
0..7
2-1464
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
measured values.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
rprtOffsetCs1900
Managed Object
3GPP Name
3GPP Reference
N/A
Description
Instance
Cell
Related FG

2-1465
SJ-20140527134815-013|2015-03-10(R1.1)
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
rprtThoCs1900
Managed Object
3GPP Name
3GPP Reference
N/A
Description

measured values.
2-1466
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
measured values.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.30 UTRAN/FDD Adjacent cell reporting signal level Offset

Full Name
UTRAN/FDD Adjacent cell reporting signal level Offset
Abbreviated Name
fddRprtOffsetCs
Managed Object
3GPP Name
3GPP Reference
N/A
2-1467
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To hand over more frequently to FDD neighbor cells, set the
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.31 UTRAN/FDD Adjacent cell reporting signal level Threshold

Full Name
UTRAN/FDD Adjacent cell reporting signal level Threshold
Abbreviated Name
fddRprtThoCs
Managed Object
3GPP Name
2-1468
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
The reporting of FDD neighbor cells is not restricted by measured

values.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To report more FDD neighbor cells, set the threshold lower.
The reporting of FDD neighbor cells is not restricted by measured
Reason
values.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.32 Reporting threshold for the Ec/No or RSCP that is not

reported
Full Name
Reporting threshold for the Ec/No or RSCP that is not reported
Abbreviated Name
fddRprtTho2CS
2-1469
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
FDD_REPORTING_THRESHOLD_2
3GPP Reference
N/A
Description
The default type that MSs are required to report is Ec/No, so that
the default value is the RSCP measurement report threshold that
does not need to be reported.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
FDDRepQntCS
When FDDRepQntCS is 0, this parameter represents the Ec/No
Parameters
threshold that does not need to be reported.

When FDDRepQntCS is 1, this parameter represents the RSCP
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the parameter value according to the measurement type that
MSs are required to report. If MSs are required to report Ec/No, set
the value to the RSCP threshold that does not need to be reported.
If MSs are required to report RSCP, set the value to the Ec/No
The default type that MSs are required to report is Ec/No, so that
Reason
the default value is the RSCP measurement report threshold that

does not need to be reported.
Change take effect
No
Access
Read/Write
OMC Access path

2-1470
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.27.33 CS UE search UTRAN adjacent cell in BSIC decoding frame

indication
Full Name
CS UE search UTRAN adjacent cell in BSIC decoding frame

indication
Abbreviated Name
searchPrioCs3g
Managed Object
3GPP Name
3G_SEARCH_PRIO
3GPP Reference
N/A
Description
In most cases, searching for GSM neighbor cells is more important.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If UEs are expected to stay in the 3G network, set this parameter
value to "allowed".
In most cases, searching for GSM neighbor cells is more important.
Reason
Change take effect
No
0
2-1471
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
rprtThoCs850
Managed Object
3GPP Name
3GPP Reference
N/A
Description

measured values.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
measured values.
Change take effect
2-1472
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
rprtOffsetCs850
Managed Object
3GPP Name
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
2-1473
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.36 TDD reselection offset

Full Name
TDD reselection offset
Abbreviated Name
tdd_Qoffset
Managed Object
3GPP Name
TDD_Qoffset
3GPP Reference
N/A
Description
When the RSCP of a TDD cell is 81 dBm, the signals are regarded
as strong.
Instance
Cell
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To make the reselection of a TDD cell easier, set the parameter
value smaller.
2-1474
SJ-20140527134815-013|2015-03-10(R1.1)
When the RSCP of a TDD cell is 81 dBm, the signals are regarded
Reason
as strong.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

report(CS)
Full Name
Max number of UTRAN/TDD adjacent cells in measurement

report(CS)
Abbreviated Name
tddMulRatRrptCs
Managed Object
3GPP Name
XXX_MULTIRAT_REPORTING
3GPP Reference
N/A
Description
Reporting two TDD neighbor cells is enough for neighbor cell

selection.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1475
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
To allow UEs to stay in the TDD network, the value can be set higher.
Reporting two TDD neighbor cells is enough for neighbor cell
Reason
selection.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.27.38 UTRAN/TDD Adjacent cell reporting signal level Offset

Full Name
UTRAN/TDD Adjacent cell reporting signal level Offset
Abbreviated Name
tddRprtOffsetCs
Managed Object
3GPP Name
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..7
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1476
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
To hand over more frequently to FDD neighbor cells, set the
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.39 UTRAN/TDD Adjacent cell reporting signal level Threshold

Full Name
UTRAN/TDD Adjacent cell reporting signal level Threshold
Abbreviated Name
tddRprtThoCs
Managed Object
3GPP Name
3GPP Reference
N/A
Description
The reporting of TDD neighbor cells is not restricted by measured

values.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
2-1477
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To report more TDD neighbor cells, set the threshold lower.
The reporting of TDD neighbor cells is not restricted by measured
Reason
values.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.40 PS measurement type reported by UE

Full Name
PS measurement type reported by UE
Abbreviated Name
reportTypePs
Managed Object
3GPP Name
REPORT_TYPE
3GPP Reference
N/A
Description
Because a PACKET MEASUREMENT REPORT message is

normally used and the recommended default value is 1 according
to the corresponding protocol, the default value should be changed
to 1.
Instance
Cell
Related FG
2-1478
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When each frequency point is allocated at least one BSIC and an
MS receives BSICs of all neighbor cells, it is recommended to

set ReportTypePS to 0, which means that an MS uses enhanced
measurement reports for more precise measurement of neighbor
cells. If the above condition is not met, it is recommended to set
ReportTypePS to 1, which means that common measurement
reports are used.
Because a PACKET MEASUREMENT REPORT message is
Reason
normally used and the recommended default value is 1 according

to the corresponding protocol, the default value should be changed
to 1.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.41 PS number of same frequency adjacent cells in report

Full Name
PS number of same frequency adjacent cells in report
Abbreviated Name
svrBandRprtPs
2-1479
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
SERVING_BAND_REPORTING
3GPP Reference
N/A
Description
Refer to the svrBandRprtCS parameter.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Refer to the configuration rule of the svrBandRprtCS parameter.
Refer to the svrBandRprtCS parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.42 PS class of reported quantities of UTRAN adjacent cells

Full Name
PS class of reported quantities of UTRAN adjacent cells

2-1480
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
fddRepQntPs
Managed Object
3GPP Name
FDD_REP_QUANT
3GPP Reference
N/A
Description
Refer to the configuration of the FDDRepQntCS parameter, whose

default value is 1.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To allow UEs to report RSCP, set the parameter value to 0. To allow
UEs to report Ec/Io, set the parameter value to 1.
Refer to the configuration of the FDDRepQntCS parameter, whose
Reason
default value is 1.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1481
SJ-20140527134815-013|2015-03-10(R1.1)

report(PS)
Full Name
Max number of UTRAN/FDD adjacent cells in measurement

report(PS)
Abbreviated Name
fddMulRatRrptPs
Managed Object
3GPP Name
FDD_MULTIRAT_REPORTING
3GPP Reference
N/A
Description
Refer to the FDDMulRatrrptCS parameter.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Configure this parameter according to on-site neighbor cell planning.
To allow UEs to stay in the FDD network, set the value higher.
Refer to the FDDMulRatrrptCS parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
2-1482
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.27.44 PS measurement reporting rate of adjacent cell

Full Name
PS measurement reporting rate of adjacent cell
Abbreviated Name
reportRatePs
Managed Object
3GPP Name
REPORTING_RATE
3GPP Reference
N/A
Description
The default value is 0 (normal), which is recommended by the

corresponding protocol.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
RepPrioPS
RepPrioPS is configured for each neighbor cell. RepRatePS is
Parameters
configured for the local cell. The two parameters determine the
frequency that a neighbor cell is reported in measurement reports
among all neighbor cells on the same priority class.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, set parameter value to 0 to treat neighbor cells equally.
To report low-priority neighbor cells at low frequency, set the

parameter value to 1.
The default value is 0 (normal), which is recommended by the
Reason
corresponding protocol.
Change take effect
No
2-1483
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.27.45 PS UE report invalid cell level allowed

Full Name
PS UE report invalid cell level allowed
Abbreviated Name
invldBsicRprtPs
Managed Object
3GPP Name
INVALID_BSIC_REPORTING
3GPP Reference
N/A
Description

value is generally "No".
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to set the parameter value to 0.
2-1484
SJ-20140527134815-013|2015-03-10(R1.1)
Reason

value is generally "No".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.46 PS multi-band report indication

Full Name
PS multi-band report indication
Abbreviated Name
mulBndRprtPs
Managed Object
3GPP Name
MULTIBAND_REPORTING
3GPP Reference
N/A
Description
The default value means that neighbor cells are reported according
to signal strength and that all frequency bands are treated equally.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1485
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
To make each frequency band report some neighbor cells, set the
parameter to a non-zero value. In a dual-frequency network, to

make the 1800M band share traffic and ensure that UEs working
in the 1800M band can hand over in this band, you can configure
900M cells to report as many 1800M neighbor cells as possible (set
the parameter value to 3), and configure 1800M cells to report as
few 900M neighbor cells as possible (set the parameter value to 1).
In a dual-frequency network, to bar one frequency from absorbing
excessive traffic, you can set the parameter value to 0, which means
reporting neighbor cells based on signal strength.
Rational settings can balance traffic and relieve congestion, but
may affect the link establishment success rate, call drop rate, and
coverage.
The default value means that neighbor cells are reported according
Reason
to signal strength and that all frequency bands are treated equally.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.47 PS offset which is added when UE reports RXLEV value

Full Name
PS offset which is added when UE reports RXLEV value
Abbreviated Name
scaleOrdPs
Managed Object
3GPP Name
SCALE_ORD
3GPP Reference
N/A
2-1486
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is only applicable to PACKET ENHANCED

MEASUREMENT REPORT messages. Because PACKET
ENHANCED MEASUREMENT REPORT messages are not used at
present, the default offset is 0.
Instance
Cell
Related FG
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When each frequency point is allocated at least one BSIC, an MS
receives BSICs of all neighbor cells and the measurement type

parameter ReportTypePS is 0, an MS uses enhanced measurement
reports for more precise measurement of neighbor cells. The value
0 of the ScaleOrdPS parameter means that there is no offset and
reported measurement results are mapped according to actual
levels. If the parameter value is 1, the offset is 10 dB, the level range
that can be reported is changed to -100 dB to 38 dB, that is, levels
that are mapped to 063 are increased by 10 dB. This parameter
value is applicable to the case that neighbor cell signal levels are
universally high. If the parameter value is 2, the SCALE value is the
smallest offset that ensures that the strongest neighbor cell can be
reported. For example, if the highest signal level in neighbor cells
is 30 dB, the SCALE value is 18 to ensure that all neighbor cells
can be mapped and reported. Generally, an offset is not needed,
and the parameter value is set to 0. For neighbor cells with special
signal strength, the parameter value can be set to 1 or 2.
This parameter is only applicable to PACKET ENHANCED
Reason
MEASUREMENT REPORT messages. Because PACKET

ENHANCED MEASUREMENT REPORT messages are not used at
present, the default offset is 0.
Change take effect
No
2-1487
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.27.48 GSM 900 Offset(PS)

Full Name
GSM 900 Offset(PS)
Abbreviated Name
rprtOffsetPs900
Managed Object
3GPP Name
900_REPORTING_OFFSET
3GPP Reference
N/A
Description
Instance
Cell
Related FG
ZGB-02-01-006 cell reselection
0..7
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the offset is larger, it is easier for the cell to be measured and
reported.
Reason
Change take effect
2-1488
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.27.49 GSM 900 Threshold(PS)

Full Name
GSM 900 Threshold(PS)
Abbreviated Name
rprtThoPs900
Managed Object
3GPP Name
900_REPORTING_THRESHOLD
3GPP Reference
N/A
Description
The default value is recommended by the corresponding protocol,

and has no threshold requirement.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is smaller, it is easier for the cell to be measured and
reported.
2-1489
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
GSM 1800 Offset(PS)
Abbreviated Name
rprtOffsetPs1800
Managed Object
3GPP Name
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..7
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1490
SJ-20140527134815-013|2015-03-10(R1.1)
reported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
rprtThoPs1800
Managed Object
3GPP Name
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1491
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
reported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
GSM 1900 Offset(PS)
Abbreviated Name
rprtOffsetPs1900
Managed Object
3GPP Name
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..7
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1492
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
reported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
rprtThoPs1900
Managed Object
3GPP Name
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
2-1493
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.54 UTRAN/FDD Offset

Full Name
UTRAN/FDD Offset
Abbreviated Name
fddRprtOffsetPs
Managed Object
3GPP Name
FDD_REPORTING_OFFSET
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..7
Unit
dB
Default Value
0
2-1494
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.55 UTRAN/FDD Threshold

Full Name
UTRAN/FDD Threshold
Abbreviated Name
fddRprtThoPs
Managed Object
3GPP Name
FDD_REPORTING_THRESHOLD
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..7
2-1495
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.56 PS UE search UTRAN adjacent cell in basic decoding frame

indication
Full Name
PS UE search UTRAN adjacent cell in basic decoding frame

indication
Abbreviated Name
searchPrioPs3g
Managed Object
3GPP Name
3G_SEARCH_PRIO
3GPP Reference
N/A
Description
Refer to the CS parameter SearchPrioPS3G.

2-1496
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If UEs are expected to stay in the UTRAN network, set this
parameter value to "Yes".
Refer to the CS parameter SearchPrioPS3G.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
rprtThoPs850
Managed Object
3GPP Name
2-1497
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
GSM 850 Offset(PS)
Abbreviated Name
rprtOffsetPs850
Managed Object
2-1498
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

report(PS)
2-1499
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Max number of UTRAN/TDD adjacent cells in measurement

report(PS)
Abbreviated Name
tddMulRatRrptPs
Managed Object
3GPP Name
TDD_MULTIRAT_REPORTING
3GPP Reference
N/A
Description
Refer to the TDDMulRatrrptCS parameter.
Instance
Cell
Related FG

handover
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Configure this parameter according to on-site neighbor cell planning.
To allow UEs to stay in the TDD network, set the value higher.
Refer to the TDDMulRatrrptCS parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2-1500
SJ-20140527134815-013|2015-03-10(R1.1)
2.27.60 UTRAN/TDD Offset

Full Name
UTRAN/TDD Offset
Abbreviated Name
tddRprtOffsetPs
Managed Object
3GPP Name
TDD_REPORTING_OFFSET
3GPP Reference
N/A
Description
Instance
Cell
Related FG

handover
0..7
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1501
SJ-20140527134815-013|2015-03-10(R1.1)
2.27.61 UTRAN/TDD Threshold

Full Name
UTRAN/TDD Threshold
Abbreviated Name
tddRprtThoPs
Managed Object
3GPP Name
TDD_REPORTING_THRESHOLD
3GPP Reference
N/A
Description

Instance
Cell
Related FG

handover
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reported.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1502
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.27.62 Reselect priority control of 2G/3G

Full Name
Reselect priority control of 2G/3G
Abbreviated Name
serviceCc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Generally, PS services for 3G are better than those for 2G.
Instance
Cell
Related FG
0: 3G re-selection preferred
1: 3G re-selection not preferred
2: 3G re-selection not allowed
3: Based on the information from SGSN,3G re-selection preferred
by default
4: Based on the information from SGSN,3G re-selection not
preferred by default
5: Based on the information from SGSN,3G re-selection not allowed
by default
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1503
SJ-20140527134815-013|2015-03-10(R1.1)
The values 0, 1, and 2 indicate controlling 2G and 3G priority
policies according to BSC settings. The values 3, 4, and 5 indicate

using the priority policy represented by the UTRANCCO parameter
delivered by the SGSN. If 3G cells are prioritized, 3G cells are
reselected for PS services. Keeping these services in 3G cells
is good for users' rate experience. If 2G cells are prioritized, 2G
neighbor cells are reselected. In this case, the impact of service
interruption is reduced, but users' rate experience is still 2G.
Generally, PS services for 3G are better than those for 2G.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.63 Max Number In Adjacent GSM cell

Full Name
Max Number In Adjacent GSM cell
Abbreviated Name
indexStartEmr
Managed Object
3GPP Name
Absolute_Index_Start_EMR
3GPP Reference
N/A
Description
Normally, 32 neighbor cells are enough.
Instance
Cell
Related FG
ZGB-02-02-004 Support 64 Neighboring Cells
32..64
Unit
N/A
Default Value
32
Related Parameters
N/A
2-1504
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The parameter value should be set according to wireless network
planning. Configure a value greater than 32 only if it is required to

configure more than 32 neighbor cells.
Normally, 32 neighbor cells are enough.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.64 A minimum threshold of RSCP for UTRAN FDD cell

re-selection
Full Name
A minimum threshold of RSCP for UTRAN FDD cell re-selection
Abbreviated Name
fdd_RscpMin
Managed Object
3GPP Name
FDD_RSCPmin
3GPP Reference
N/A
Description
The RSCP of -102 dBm is enough for UEs to operate stably in FDD.
Instance
Cell
Related FG
0..15
2-1505
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
dBm
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is smaller, it is easier to reselect FDD
neighbor cells.
The RSCP of -102 dBm is enough for UEs to operate stably in FDD.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.65 Applies an offset to FDD_Qmin value

Full Name
Applies an offset to FDD_Qmin value
Abbreviated Name
fdd_Qmin_Offset
Managed Object
3GPP Name
FDD_Qmin_Offset
3GPP Reference
N/A
Description
FDD_Qmincan indicates the Ec/No requirement for the reselection

to FDD neighbor cells.
Instance
Cell
2-1506
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..7
Unit
db
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To make it easier to reselect 3G neighbor cells, you can set a large
value.
FDD_Qmincan indicates the Ec/No requirement for the reselection
Reason
to FDD neighbor cells.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.66 Service UTRAN CCO support

Full Name
Service UTRAN CCO support
Abbreviated Name
utranCcoSupp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

2-1507
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
ZGO-02-03-004 Inter-RAT NCCR
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
PSUTRANCCOSupp
After the BSC-level PSUTRANCCOSupp is enabled, this parameter
Parameters
takes effect.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The switch is turned on when it is required to use the PS service
priority control policy in the 2G/3G interaction process. Otherwise,

this switch is turned off. This function is related to NCCR and PS
handover. It is recommended to disable this function.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.67 Signal strength and load and capacity priority

Full Name
Signal strength and load and capacity priority
Abbreviated Name
StrenLoadCapaPri
Managed Object
2-1508
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
Without special requirements, signal strength is used as the

reselection criterion.
Instance
Cell
Related FG
0..2
Unit
N/A
Default Value
Related Parameters
NC2For23G
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the network operator requires load-based balancing, set
the parameter value to 1. If the network operator requires

capacity-based balancing, set the parameter value to 2.
Without special requirements, signal strength is used as the
Reason
reselection criterion.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.27.68 Signal strength threshold

2-1509
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Signal strength threshold
Abbreviated Name
StrenThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Use the lowest signal strength that can ensure normal UE access.
Instance
Cell
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the requirement for the signal strength of a reselection target 3G
cell is high, it is recommended to use a large value. Otherwise,

use a small value.
Use the lowest signal strength that can ensure normal UE access.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1510
SJ-20140527134815-013|2015-03-10(R1.1)
2.27.69 Load threshold

Full Name
Load threshold
Abbreviated Name
LoadThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
According to the load balancing principle, the load of a 3G cell

cannot be too high after a UE reselects the cell.
Instance
Cell
Related FG
0..100
Unit
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the value according to the expected load of the target 3G cell.
If 2G PS services are busy and the 3G cell is not congested, the

value can be set larger, so that it is easier for UEs to reselect the
3G cell. If the load of the 3G cell is expected to be lower, the value
can be set smaller.
According to the load balancing principle, the load of a 3G cell
Reason
cannot be too high after a UE reselects the cell.
Change take effect
No
Access
Read/Write
2-1511
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.27.70 Available capacity threshold

Full Name
Available capacity threshold
Abbreviated Name
CapaThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
According to the load balancing principle, the free access capacity

of a 3G cell cannot be too small after a UE reselects the cell.
Instance
Cell
Related FG
1..100
Unit
Default Value
40
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the value according to the expected free access capacity of the
target 3G cell. If 2G PS services are busy and the 3G cell is not

congested, the value can be set smaller, so that it is easier for UEs
to reselect the 3G cell. If the free access capacity of the 3G cell is
expected to be higher, the value can be set larger.
According to the load balancing principle, the free access capacity
Reason
of a 3G cell cannot be too small after a UE reselects the cell.
Change take effect
2-1512
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.28 E-UTRAN Measurement(GEutranMeasure)

2.28.1 E-UTRAN Measurement ID
Full Name
E-UTRAN Measurement ID
Abbreviated Name
GEutranMeasureId
Managed Object
E-UTRAN Measurement(GEutranMeasure)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an E-UTRAN measurement ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1513
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->E-UTRAN Measurement
N/A

qsearch_C
Full Name
Initial parameter instead of qsearch_c before UE receiving

qsearch_C
Abbreviated Name
qsearchCInit
Managed Object
3GPP Name
Qsearch_C_E-UTRAN_Initial
3GPP Reference
N/A
Description
The default value is generally set to 7, so that there is a higher

probability that LTE neighbor cells are measured.
Instance
Cell
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1514
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To report more LTE neighbor cells, set a value that requires
LTE neighbor cells start to be measured at high signal strength.

Otherwise, set a value that requires LTE neighbor cells start to be
measured at low signal strength.
The default value is generally set to 7, so that there is a higher
Reason
probability that LTE neighbor cells are measured.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.3 Class of reported quantities of E-UTRAN adjacent cells

Full Name
Class of reported quantities of E-UTRAN adjacent cells
Abbreviated Name
repQuant
Managed Object
3GPP Name
E-UTRAN_REP_QUANT
3GPP Reference
N/A
Description
The default value indicates one of two measurements specified in

the corresponding protocol, and is not set for any special reason.
Instance
Cell
Related FG
0: RSRP(RSRP)
1: RSRQ(RSRQ)
2-1515
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter must be configured in accordance with the
requirement of the operator.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.4 Max number of E-UTRAN adjacent cells in measurement

report
Full Name
Max number of E-UTRAN adjacent cells in measurement report
Abbreviated Name
mulRatRrpt
Managed Object
3GPP Name
E-UTRAN_MULTIRAT_REPORTING
3GPP Reference
N/A
Description
The default value allows LTE neighbor cells to be fully reported

without affecting the reporting of other types of neighbor cells.
2-1516
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To report more LTE cells in a measurement report, set the parameter
value larger. Otherwise, set it smaller.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.5 FDD Measurement report threshold of RSRP or RSRQ in 6-bit

Full Name
FDD Measurement report threshold of RSRP or RSRQ in 6-bit
Abbreviated Name
fddRptthresh
Managed Object
3GPP Name
E-UTRAN_FDD_REPORTING_THRESHOLD
3GPP Reference
N/A
2-1517
SJ-20140527134815-013|2015-03-10(R1.1)
Description
The default value 0 means that measured LTEFDD neighbor cells

can be reported no matter how low the RSRP/RSRQ is.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is set smaller, there is a higher probability to report
LTEFDD neighbor cells. Otherwise, there is a higher probability to

report other types of neighbor cells. You can balance the types of
reported cells by adjusting the parameter value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.6 FDD Measurement report threshold of RSRQ or RSRP in

6-bit reporting
Full Name
FDD Measurement report threshold of RSRQ or RSRP in 6-bit

reporting
2-1518
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
fddRptthresh2
Managed Object
3GPP Name
E-UTRAN_FDD_REPORTING_THRESHOLD_2
3GPP Reference
N/A
Description

can be reported no matter how low the RSRQ/RSRP is.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter gives the lowest acceptable value of unreported
quantity (RQ or RSRP). If the value is set smaller, there is a higher

probability to report LTEFDD neighbor cells. Otherwise, there is a
higher probability to report other types of neighbor cells.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1519
SJ-20140527134815-013|2015-03-10(R1.1)
2.28.7 TDD Measurement report threshold of RSRP or RSRQ in

6-bit reporting
Full Name
TDD Measurement report threshold of RSRP or RSRQ in 6-bit

reporting
Abbreviated Name
tddRptthresh
Managed Object
3GPP Name
E-UTRAN_TDD_REPORTING_THRESHOLD
3GPP Reference
N/A
Description
The default value 0 means that measured LTETDD neighbor cells

Instance
Cell
Related FG
0: 0
1: 6
2: 12
3: 18
4: 24
5: 30
6: 36
7: never
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

2-1520
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.8 TDD Measurement report threshold of RSRQ or RSRP in

6-bit reporting
Full Name
TDD Measurement report threshold of RSRQ or RSRP in 6-bit

reporting
Abbreviated Name
tddRptthresh2
Managed Object
3GPP Name
E-UTRAN_TDD_REPORTING_THRESHOLD_2
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1521
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.9 FDD Measurement report threshold of RSRP or RSRQ in

3-bit reporting
Full Name
FDD Measurement report threshold of RSRP or RSRQ in 3-bit

reporting
Abbreviated Name
fddMeasRptOffset
Managed Object
3GPP Name
E-UTRAN_FDD_MEASUREMENT_REPORT_OFFSET
3GPP Reference
N/A
Description
The default parameter is set according to the corresponding

protocol.
Instance
Cell
Related FG
{repQuant==0}[0..63],
{repQuant==1}[0..30]
Unit
N/A
Default Value
Related Parameters
N/A
2-1522
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the parameter value properly to allow the actual measured value
fall in the measured value range given by the parameter description.
Reason
protocol.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.10 FDD Measurement report threshold of RSRQ or RSRP in

3-bit reporting
Full Name
FDD Measurement report threshold of RSRQ or RSRP in 3-bit

reporting
Abbreviated Name
fddMeasRptthresh2
Managed Object
3GPP Name
3GPP Reference
N/A
Description

protocol.
Instance
Cell
Related FG
2-1523
SJ-20140527134815-013|2015-03-10(R1.1)
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is smaller, it is easier to report a cell. If the value is
larger, the signal quality of a reported neighbor cell is better.
Reason
protocol.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.11 TDD Measurement report threshold of RSRP or RSRQ in

3-bit reporting
Full Name
TDD Measurement report threshold of RSRP or RSRQ in 3-bit

reporting
Abbreviated Name
tddMeasRptOffset
Managed Object
3GPP Name
E-UTRAN_TDD_MEASUREMENT_REPORT_OFFSET
3GPP Reference
N/A
2-1524
SJ-20140527134815-013|2015-03-10(R1.1)
Description

protocol.
Instance
Cell
Related FG
{repQuant==0}[0..63],
{repQuant==1}[0..30]
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the parameter value properly to allow the actual measured value
fall in the measured value range given by the parameter description.
Reason
protocol.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.12 TDD Measurement report threshold of RSRQ or RSRP in

3-bit reporting
Full Name
TDD Measurement report threshold of RSRQ or RSRP in 3-bit

reporting
2-1525
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
tddMeasRptthresh2
Managed Object
3GPP Name
3GPP Reference
N/A
Description

protocol.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is smaller, it is easier to report a cell. If the value is
larger, the signal quality of a reported neighbor cell is better.
Reason
protocol.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1526
SJ-20140527134815-013|2015-03-10(R1.1)
2.28.13 Measurement report threshold offset of RSRQ or RSRP

in 3-bit reporting
Full Name
Measurement report threshold offset of RSRQ or RSRP in 3-bit

reporting
Abbreviated Name
rptGranularity
Managed Object
3GPP Name
REPORTING_GRANULARITY
3GPP Reference
N/A
Description

protocol.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is set to 0, it means the range of measured
values is small. If the parameter value is set to 1, it means the range

of measured values is large.
Reason
protocol.
Change take effect
No
Access
Read/Write
2-1527
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.28.14 Measurement threshold of UE performing GPRS E-UTRAN

Cell
Full Name
Measurement threshold of UE performing GPRS E-UTRAN Cell
Abbreviated Name
qsearchP_Ps
Managed Object
3GPP Name
Qsearch_P_E-UTRAN
3GPP Reference
N/A
Description
The default value 7 is set to allow UEs to detect E_UTRAN neighbor

cells quickly.
Instance
Cell
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
cells quickly.
2-1528
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.15 GPRS max number of E-UTRAN adjacent cells in

measurement report
Full Name
GPRS max number of E-UTRAN adjacent cells in measurement

report
Abbreviated Name
mulRatRpt_Ps
Managed Object
3GPP Name
E-UTRAN_REP_QUANT
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1529
SJ-20140527134815-013|2015-03-10(R1.1)
To report more LTE cells in a measurement report, set the parameter
value larger. Otherwise, set it smaller.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.16 GPRS class of reported quantities of E-UTRAN adjacent

cells
Full Name
GPRS class of reported quantities of E-UTRAN adjacent cells
Abbreviated Name
repQuant_Ps
Managed Object
3GPP Name
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0: RSRP(RSRP)
1: RSRQ(RSRQ)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1530
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
RSRP represents signal strength. RSRQ represents signal quality.
Set the value according to operator's requirement.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.17 GPRS FDD Measurement report threshold of RSRP or RSRQ

Full Name
GPRS FDD Measurement report threshold of RSRP or RSRQ
Abbreviated Name
fddRptThresh_Ps
Managed Object
3GPP Name
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2-1531
SJ-20140527134815-013|2015-03-10(R1.1)
0: 0
1: 6
2: 12
3: 18
4: 24
5: 30
6: 36
7: never
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

report other types of neighbor cells. You can adjust the parameter
value to balance the types of reported neighbor cells.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.18 GPRS FDD Measurement report threshold of RSRQ or RSRP

Full Name
GPRS FDD Measurement report threshold of RSRQ or RSRP

2-1532
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
fddRptThresh2_Ps
Managed Object
3GPP Name
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1533
SJ-20140527134815-013|2015-03-10(R1.1)
2.28.19 GPRS TDD Measurement report threshold of RSRP or RSRQ

Full Name
GPRS TDD Measurement report threshold of RSRP or RSRQ
Abbreviated Name
tddRptThresh_Ps
Managed Object
3GPP Name
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0: 0
1: 6
2: 12
3: 18
4: 24
5: 30
6: 36
7: never
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
2-1534
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.28.20 GPRS TDD Measurement report threshold of RSRQ or RSRP

Full Name
GPRS TDD Measurement report threshold of RSRQ or RSRP
Abbreviated Name
tddRptThresh2_Ps
Managed Object
3GPP Name
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-1535
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.28.21 RxLevel Threshold for Measure E-UTRAN Neighbour Cell In

Dedicated Mode
Full Name
RxLevel Threshold for Measure E-UTRAN Neighbour Cell In

Dedicated Mode
Abbreviated Name
QSearchC
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

cells quickly.
Instance
Cell
Related FG
0: below - 98dBm
1: below - 94dBm
2: below - 90dBm
3: below -86dBm
4: below -82dBm
5: below -78dBm
6: below -74dBm
7: always
8: above - 78dBm
9: above -74dBm
2-1536
SJ-20140527134815-013|2015-03-10(R1.1)
10: above -70dBm

11: above -66dBm
12: above -62dBm
13: above -58dBm
14: above -54dBm
15: never
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
cells quickly.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.28.22 Slippery window size for calculating average value of

E-Utran Neighbour Cell
Full Name
Slippery window size for calculating average value of E-Utran

Neighbour Cell
2-1537
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
WindowEutran
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
There should be enough samples to ensure the accuracy of

E_UTRAN neighbor cell signals.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too small, the abrupt changes in E_UTRAN neighbor
cell signals cause inaccuracy.

If the value is too large, the average value cannot reflect the latest
E_UTRAN neighbor cell signal.
There should be enough samples to ensure the accuracy of
Reason
E_UTRAN neighbor cell signals.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2-1538
SJ-20140527134815-013|2015-03-10(R1.1)
2.28.23 offset to the reported value when prioritizing the FDD

E-UTRAN cells for 6bit reporting
Full Name
offset to the reported value when prioritizing the FDD E-UTRAN

cells for 6bit reporting
Abbreviated Name
FDDRptOffset6bit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The default value means treating various types of neighbor cells

equally.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To prioritize the reporting of FDD E_UTRAN neighbor cells, set the
value larger.
Reason
equally.
Change take effect
No
Access
Read/Write
OMC Access path

2-1539
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.100/V6.30.100
N/A
2.28.24 offset to the reported value when prioritizing the TDD

Full Name
offset to the reported value when prioritizing the TDD E-UTRAN

Abbreviated Name
TDDRptOffset6bit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

equally.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To prioritize the reporting of TDD E_UTRAN neighbor cells, set the
value larger.
Reason
equally.
Change take effect
No
0
2-1540
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A

Full Name

Abbreviated Name
FDDRptOffset3bit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

equally.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To prioritize the reporting of FDD E_UTRAN neighbor cells, set the
value larger.
2-1541
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
equally.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A

Full Name

Abbreviated Name
TDDRptOffset3bit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

equally.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1542
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
To prioritize the reporting of TDD E_UTRAN neighbor cells, set the
value larger.
Reason
equally.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A

E-UTRAN cells for PS
Full Name

cells for PS
Abbreviated Name
FDDRptOffset_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

equally.
Instance
Cell
Related FG

Handover
0..7
Unit
N/A
Default Value
2-1543
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In the case of PS services, to prioritize the reporting of FDD
E_UTRAN neighbor cells, set the value larger.
Reason
equally.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A

E-UTRAN cells for PS
Full Name

cells for PS
Abbreviated Name
TDDRptOffset_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

equally.
Instance
Cell
2-1544
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Handover
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In the case of PS services, to prioritize the reporting of TDD
E_UTRAN neighbor cells, set the value larger.
Reason
equally.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.28.29 Service E-UTRAN CCO

Full Name
Service E-UTRAN CCO
Abbreviated Name
ServiceEUTRANCCO
Managed Object
3GPP Name
Service UTRAN CCO
3GPP Reference
48.018
2-1545
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the preferred policy of network-controlled

cell reselection from GSM to E-UTRAN. The policy contains
E-UTRAN preferred, GSM preferred, and E-UTEAN not allowed.
The cell change order may be based on the Service E-UTRAN CCO
of the SGSN or the preferred policy configured on the BSC.
Instance
Cell
Related FG
ZGO-02-03-017 Cell Reselection to LTE with NCCR
0: Network initiated cell change order to E-UTRAN or PS handover

to E-UTRAN procedure should be performed
to E-UTRAN procedure should be performed
to E-UTRAN procedure should not be performed
3: Refer to SGSN,default value indicates that network initiated cell
change order to E-UTRAN or PS handover to E-UTRAN procedure
should be performed
4: Refer to SGSN,default value indicates that network initiated cell
should not be performed
5: Refer to SGSN,default value indicates that Network initiated cell
shall not be performed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the SGSN supports the Service E-UTRAN CCO field and the
preferred policy is desired to be controlled by the SGSN, this

parameter is set to 3, 4, or 5.If the SGSN does not support the
Service E-UTRAN CCO field, the preferred policy configured on the
BSC is used when this parameter is set to 0, 1, or 2, and the default
policy configured on the SGSN is used when this parameter is set to
3, 4, or 5.If LTE is preferred to carry PS services, this parameter is
set to 0 or 3. If GSM is preferred, this parameter is set to 1 or 4. If
cell reselection to LTE is not allowed, this parameter is set to 2 or
2-1546
SJ-20140527134815-013|2015-03-10(R1.1)
5.For GSM and LTE load balancing, this parameter is generally

set to E-UTRAN preferred.
This parameter is set to E-UTRAN preferred by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.28.30 Measurement threshold of UE performing GPRS E-UTRAN

Cell in packet transfer mode
Full Name
Measurement threshold of UE performing GPRS E-UTRAN Cell

in packet transfer mode
Abbreviated Name
QsearchP_PS_T
Managed Object
3GPP Name
Qsearch_P_E-UTRAN
3GPP Reference
45.008
Description
This parameter determines the threshold used when a UE starts

measurement for the GPRS LTE cell reselection in packet transfer
mode. If the value of this parameter ranges from 0 to 7, the system
searches EUTRAN adjacent cells when the signal strength is lower
than that corresponding to the value. If the value of this parameter
ranges from 8 to 15, the system searches EUTRAN cells when the
UE signal strength is higher than that corresponding to the value.
Instance
Cell
Related FG
ZGO-02-03-008 GSM/LTE cell Reselection
0..15
Unit
N/A
2-1547
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To be configured according to the transmission-state network
requirements. If the parameter ranges 0-7, use a value below

QsearchP_PS when it is expected to measure EUTRAN neighbor
cell in the case the signal is weaker than that in the idle state,
otherwise use a value greater than QsearchP_PS. If the parameter
ranges 7-15, use a value greater than QsearchP_PS when it is
expected to measure EUTRAN neighbor cell in the case the signal
is stronger than that in the idle state, otherwise use a value lower
than QsearchP_PS.
Consistent with the parameter in packet idle mode.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.28.31 GPRS max number of E-UTRAN adjacent cells in

measurement report in packet transfer mode
Full Name
GPRS max number of E-UTRAN adjacent cells in measurement

report in packet transfer mode
Abbreviated Name
MulRatRpt_PS_T
Managed Object
2-1548
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
3GPP Reference
45.008
Description
This parameter indicates the maximum number of LTE adjacent

cells included in a measurement report or list of strongest cells
(GPRS) in packet transfer mode.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Raise the value a bit if more LTE neighbor cells are expected to
be measured.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2-1549
SJ-20140527134815-013|2015-03-10(R1.1)
2.28.32 GPRS class of reported quantities of E-UTRAN adjacent

cells in packet transfer mode
Full Name
GPRS class of reported quantities of E-UTRAN adjacent cells in

packet transfer mode
Abbreviated Name
RepQuant_PS_T
Managed Object
3GPP Name
E-UTRAN_REP_QUANT
3GPP Reference
45.008
Description
This parameter indicates the type of measurement (GPRS) of LTE

adjacent cells in a measurement report in packet transfer mode.
Instance
Cell
Related FG
0..1(0 = RSRP, 1 = RSRQ)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Use 0 if RSRP is to be used as the basis for reselection. Use 1 if
RSRQ is to be used as the basis for reselection.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1550
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.103/V6.30.103
N/A
2.28.33 GPRS FDD Measurement report threshold of RSRP or

RSRQ in packet transfer mode
Full Name
GPRS FDD Measurement report threshold of RSRP or RSRQ in

Abbreviated Name
FDDRptThresh_PS_T
Managed Object
3GPP Name
3GPP Reference
45.008
Description
This parameter determines the threshold (GPRS) for reporting

RSRP or RSRQ (specified in RepQuant) measurements in packet
transfer mode when the type of FDD measurement reports is 6-bit.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Lower the value a bit to make it easier to report the FDD EUTRAN
neighbor cell measurement reports.
Reason
Change take effect
No
2-1551
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.28.34 GPRS FDD Measurement report threshold of RSRQ or

RSRP in packet transfer mode
Full Name
GPRS FDD Measurement report threshold of RSRQ or RSRP in

Abbreviated Name
FDDRptThresh2_PS_T
Managed Object
3GPP Name
3GPP Reference
45.008
Description

RSRQ or RSRP (not specified in RepQuant) measurements in
packet transfer mode when the type of FDD measurement reports
is 6-bit.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1552
SJ-20140527134815-013|2015-03-10(R1.1)
The value depends on the measurement report type to be reported
by UE.
If RSRP is required to be reported, use a value that indicates not to
report RSRQ.
If RSRQ is required to be reported, use a value that indicates not
to report RSRP.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.28.35 GPRS TDD Measurement report threshold of RSRP or

RSRQ in packet transfer mode
Full Name
GPRS TDD Measurement report threshold of RSRP or RSRQ in

Abbreviated Name
TDDRptThresh_PS_T
Managed Object
3GPP Name
3GPP Reference
45.008
Description

RSRQ or RSRP (specified in RepQuant) measurements in packet
transfer mode when the type of TDD measurement reports is 6-bit.
Instance
Cell
Related FG
0..7
Unit
N/A
2-1553
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Lower the value a bit to make it easier to report the TDD EUTRAN
neighbor cell measurement reports.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.28.36 GPRS TDD Measurement report threshold of RSRQ or

RSRP in packet transfer mode
Full Name
GPRS TDD Measurement report threshold of RSRQ or RSRP in

Abbreviated Name
TDDRptThresh2_PS_T
Managed Object
3GPP Name
3GPP Reference
45.008
2-1554
SJ-20140527134815-013|2015-03-10(R1.1)
Description

RSRQ or RSRP (not specified in RepQuant) measurements in
packet transfer mode when the type of TDD measurement reports
is 6-bit.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value depends on the measurement report type to be reported
by UE.
If RSRP is required to be reported, use a value that indicates not to
report RSRQ.
If RSRQ is required to be reported, use a value that indicates not
to report RSRP.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2-1555
SJ-20140527134815-013|2015-03-10(R1.1)
2.28.37 offset to the reported value when prioritising the FDD

E-UTRAN cells for PS in packet transfer mode
Full Name
offset to the reported value when prioritising the FDD E-UTRAN

cells for PS in packet transfer mode
Abbreviated Name
FDDRptOffset_PS_T
Managed Object
3GPP Name
E UTRAN_FDD_MEASUREMENT_REPORT_OFFSET
3GPP Reference
45.008
Description
This parameter specifies the offset of the value reported with priority
by the E-UTRAN FDD cells for the PS in packet transfer mode.
Instance
Cell
Related FG
0..7(For RSRP the mapping is as follows:

0 = -140 dBm, 1 = -139 dBm, 2 = -138 dBm, , 62 = -78 dBm,
63 = -77 dBm.
For RSRQ the mapping is as follows:
0 = -19.5 dB, 1 = -19 dB, 2 = -18.5 dB, , 29 = -4 dB, 30 = -3.5 dB.)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In the case of transmission-state PS services, use a value greater
than FDDRptOffset_PS to prioritize the reporting of FDD E_UTRAN

neighbor cells over those in idle state.
Reason
Change take effect
No
2-1556
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.28.38 offset to the reported value when prioritising the TDD

E-UTRAN cells for PS in packet transfer mode
Full Name
offset to the reported value when prioritising the TDD E-UTRAN

cells for PS in packet transfer mode
Abbreviated Name
TDDRptOffset_PS_T
Managed Object
3GPP Name
E UTRAN_TDD_MEASUREMENT_REPORT_OFFSET
3GPP Reference
45.008
Description
This parameter specifies the offset of the value reported with priority
by the E-UTRAN TDD cells for the PS in packet transfer mode.
Instance
Cell
Related FG
0..7(For RSRP the mapping is as follows:

0 = -140 dBm, 1 = -139 dBm, 2 = -138 dBm, , 62 = -78 dBm,
63 = -77 dBm.
For RSRQ the mapping is as follows:
0 = -19.5 dB, 1 = -19 dB, 2 = -18.5 dB, , 29 = -4 dB, 30 = -3.5 dB.)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1557
SJ-20140527134815-013|2015-03-10(R1.1)
In the case of transmission-state PS services, use a value greater
than TDDRptOffset_PS to prioritize the reporting of TDD E_UTRAN

neighbor cells over those in idle state.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.29 UTRAN Handover

Control(GUtranHandoverControl)
2.29.1 UTRAN Handover Control ID
Full Name
UTRAN Handover Control ID
Abbreviated Name
GUtranHandoverControlId
Managed Object
UTRAN Handover Control(GUtranHandoverControl)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a UTRAN handover control ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-1558
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->UTRAN Handover Control
N/A
2.29.2 Inter system handover supported

Full Name
Inter system handover supported
Abbreviated Name
interSysHoCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This switch is turned on only in offices with this requirement.
Instance
Cell
Related FG

Handover
2-1559
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For an iBSC to support handover between 2G and 3G systems
in the CS domain, first of all, the intersystem handover switch

(InterSysHoCtrl) must be turned on. This parameter normally uses
the default value.
This switch is turned on only in offices with this requirement.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.3 Punishment period of UTRAN cell when handover failure

Full Name
Punishment period of UTRAN cell when handover failure
Abbreviated Name
hoFailPenalTm3g
Managed Object

3GPP Name
N/A
2-1560
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter defines a protection period to prevent an immediate

handover after a handover failure. Reducing call drops also should
be considered.
Instance
Cell
Related FG
1..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter defines a protection period to prevent that
continuous attempts to hand over the same UE fail consecutively.

If the parameter value is too small, the protection period is not long
enough to prevent handover failure.
If the parameter value is too large, the protection period is so long
that call drops may occur.
This parameter defines a protection period to prevent an immediate
Reason
handover after a handover failure. Reducing call drops also should

be considered.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1561
SJ-20140527134815-013|2015-03-10(R1.1)
2.29.4 Slippery window size for calculating Ec/No or RSCP average

value to be zero
Full Name
Slippery window size for calculating Ec/No or RSCP average value

to be zero
Abbreviated Name
hoWindow3g
Managed Object

3GPP Name
Hreqave
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.

Reason

Change take effect
2-1562
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.29.5 Number that measurement value allowed to be zero

Full Name
Number that measurement value allowed to be zero
Abbreviated Name
zeroAllowed3g
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Occasional zeros are acceptable. Too many zeros indicate that the
signal quality of the neighbor cell is poor.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1563
SJ-20140527134815-013|2015-03-10(R1.1)
If the number of allowed zeros is set to be too small, good neighbor
cells may be ignored.

If the number of allowed zeros is set to be too large, UEs may be
handed over to neighbor cells with poor signal quality.
It is recommended to set a small value to select neighbor cells with
good signal quality.
Occasional zeros are acceptable. Too many zeros indicate that the
Reason
signal quality of the neighbor cell is poor.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.6 Handover from GSM to UTRAN FDD RSCP Threshold

Full Name
Handover from GSM to UTRAN FDD RSCP Threshold
Abbreviated Name
hoRscpThsFdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The default value is set according to field experience. Generally, 75

dBm can meet the requirements for access and conversation quality.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
35
Related Parameters
N/A
2-1564
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is the lowest threshold for a handover to the FDD
network. You can set the parameter value according to the 2G/3G
interaction policy. To prioritize the 3G network, you can decrease
this parameter value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.7 Handover from GSM to UTRAN FDD RSCP Value P

Full Name
Handover from GSM to UTRAN FDD RSCP Value P
Abbreviated Name
hoRscp_P_Fdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The default value ensures that this type of handover can be initiated
accurately and rapidly.
Instance
Cell
Related FG
2-1565
SJ-20140527134815-013|2015-03-10(R1.1)
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.29.8 Handover from GSM to UTRAN FDD RSCP Value N

Full Name
Handover from GSM to UTRAN FDD RSCP Value N
Abbreviated Name
hoRscp_N_Fdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1566
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.29.9 Handover from GSM to UTRAN FDD Ec/No Threshold

Full Name
Handover from GSM to UTRAN FDD Ec/No Threshold
Abbreviated Name
hoEcNoThsFdd
2-1567
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The default value is set according to field experience. Generally,

Ec/No 25 dBm can meet the requirements for access and
conversation quality.
Instance
Cell
Related FG
0..49
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to use the default value.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1568
SJ-20140527134815-013|2015-03-10(R1.1)
2.29.10 Handover from GSM to UTRAN FDD Ec/No Value P

Full Name
Handover from GSM to UTRAN FDD Ec/No Value P
Abbreviated Name
hoEcNo_P_Fdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
2-1569
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.29.11 Handover from GSM to UTRAN FDD Ec/No Value N

Full Name
Handover from GSM to UTRAN FDD Ec/No Value N
Abbreviated Name
hoEcNo_N_Fdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
2-1570
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.29.12 Directed retry to UTRAN cell allowed

Full Name
Directed retry to UTRAN cell allowed
Abbreviated Name
interSysRdCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This switch should be turned off if this cell is not configured with
any 3G neighbor cell. This switch can be turned on if this cell is
configured with 3G neighbor cells.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
OutDrEnable
When OutDrEnable is set to Yes and this parameter is also set to
Parameters
Yes, redirection between systems can be performed.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If this cell is configured with 3G neighbor cells and cannot be
allocated service channels, UEs can try to redirect to a 3G neighbor

cell under the permission of this switch.
2-1571
SJ-20140527134815-013|2015-03-10(R1.1)
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.13 FDD/TDD handover

Full Name
FDD/TDD handover
Abbreviated Name
fddTddPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
0: Priority to FDD
1: Priority to TDD
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1572
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
Set the parameter value according to actual conditions. If neighbor
cells are FDD cells, give handover priority to FDD cells. If neighbor
cells are TDD cells, give handover priority to TDD cells.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.14 UTRAN handover

Full Name
UTRAN handover
Abbreviated Name
serviceHo
Managed Object

3GPP Name
Service Handover
3GPP Reference
N/A
Description
The default value is based on the MSC policy.
Instance
Cell
Related FG
0: Handover to UTRAN first

1: Not Handover to UTRAN first
2: Not allow to Handover to UTRAN
3: According to MSC, default handover to UTRAN first
4: According to MSC, default not handover to UTRAN first
5: According to MSC, default not allowed to handover to UTRAN
Unit
N/A
Default Value
3
2-1573
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The parameter value can be based on the MSC policy, and can be
adjusted according to customer requirements.
The default value is based on the MSC policy.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.15 Handover from GSM to UTRAN TDD RSCP Threshold

Full Name
Handover from GSM to UTRAN TDD RSCP Threshold
Abbreviated Name
hoRscpThsTdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Handover
2-1574
SJ-20140527134815-013|2015-03-10(R1.1)
0..63
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is the lowest threshold for a handover to the TDD
network. You can set the parameter value according to the 2G/3G
interaction policy. To prioritize the 3G network, you can decrease
this parameter value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.16 Handover from GSM to UTRAN TDD RSCP Value N

Full Name
Handover from GSM to UTRAN TDD RSCP Value N
Abbreviated Name
hoRscp_N_Tdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1575
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
Cell
Related FG

Handover
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.29.17 Handover from GSM to UTRAN TDD RSCP Value P

Full Name
Handover from GSM to UTRAN TDD RSCP Value P
Abbreviated Name
hoRscp_P_Tdd
Managed Object
2-1576
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG

Handover
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2-1577
SJ-20140527134815-013|2015-03-10(R1.1)
2.29.18 RSCP threshold when handover from GSM to FDD for load
sharing
Full Name
RSCP threshold when handover from GSM to FDD for load sharing
Abbreviated Name
loadHoRscpThsFdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

0..63
Unit
N/A
Default Value
35
Related Parameters
HoRSCPThsFDD
Not higher than HoRSCPThsFDD.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The parameter value cannot be greater than HoRSCPThsFDD. To
implement load-based handover, the iBSC should inform adjacent

BSSs or RNSs of its load conditions in time by regularly sending the
LOAD INDICATION message (BSSAP) to the MSC.
To measure loads and report indication, the background involves the
"LoadInd", "LoadValidTime", and "LoadIndPrd" parameters, which
represent whether load indication is enabled and the timing policy
for load reporting.
This parameter has not been put into use. It is recommended to
reserve this parameter.
Reason
Change take effect
2-1578
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.29.19 Ec/No threshold when handover from GSM to 3G for load

sharing
Full Name
Ec/No threshold when handover from GSM to 3G for load sharing
Abbreviated Name
loadHoEcNoThsFdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

0..49
Unit
N/A
Default Value
25
Related Parameters
HoEcNoThsFDD
Not higher than HoEcNoThsFDD.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1579
SJ-20140527134815-013|2015-03-10(R1.1)
The parameter value cannot be greater than HoRSCPThsFDD. To

for load reporting.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.20 RSCP threshold when handover from GSM to TDD for load
sharing
Full Name
RSCP threshold when handover from GSM to TDD for load sharing
Abbreviated Name
loadHoRscpThsTdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
2-1580
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

0..63
Unit
N/A
Default Value
35
Related Parameters
HoRSCPThsTDD
Not higher than HoRSCPThsTDD.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The parameter value cannot be greater than HoRSCPThsTDD. To

for load reporting.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.21 Penalty time of handover failure(PS)

2-1581
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Penalty time of handover failure(PS)
Abbreviated Name
hoFailPenalTm3g_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the PS handover to a 3G target cell fails, the cell is punished in a

period of time, during which no handover to this cell is performed.
This parameter determines the penalty duration.
Instance
Related FG
1..100
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value is 5, because the wireless environment of an MS
Reason
normally changes after 5 s.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1582
SJ-20140527134815-013|2015-03-10(R1.1)
2.29.22 Window of calculating 3G cell(PS)

Full Name
Window of calculating 3G cell(PS)
Abbreviated Name
hoWindow3g_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In a system, the BSC makes PS handover decisions according to

measured data. To avoid the negative impact of abrupt changes in
measured values resulting from complicated radio transmission,
the BSC, when making a PS handover decision, no longer uses
the original measured data but instead a series of average values
of the measured data. Averaging the measured values of UTRAN
adjacent cells is also required.
The time window size (HoWindow3G_PS), which is the number
of samples, is used to calculate average Ec/No or RSCP values
of UTRAN adjacent cells.
Instance
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
needed.
This method can achieve a good window smoothing effect.
Reason
Change take effect
No
2-1583
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.29.23 Support PS handover of Inter-System(PS)

Full Name
Support PS handover of Inter-System(PS)
Abbreviated Name
interSysHoCtrl_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BSC supports inter-RAT PS

handover. This parameter determines whether the BSC allows
initiating a PS handover to a 3G system.
Instance
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
needed.
2-1584
SJ-20140527134815-013|2015-03-10(R1.1)
It is a functional parameter and not specified by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.24 Number of zero in measure result(PS)

Full Name
Number of zero in measure result(PS)
Abbreviated Name
zeroAllowed3G_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

data of up to six adjacent cells with the strongest signal strength.
not be consecutive. For a cell whose signal strength is less than
-110 dBm, the measured data is not reported. The BSC marks
the measured data of these unreported cells as zero. To avoid
the negative impact of zeros on averaging, it is supposed that
occasional zeros are allowed and are not used in averaging.
of this neighbor cell are poor. This parameter specifies the number
of occurrences of zeros that can be allowed or ignored during an
average calculation. To be specific, during averaging, if the number
of zeroes in the sample exceeds ZeroAllowed, these sampling
values are hardly reliable, and the measurement average is the sum
of the reported values divided by NCellWindow. If the number of
zeroes in the reported values does not exceed ZeroAllowed, these
sampling values are much reliable and the measurement average
2-1585
SJ-20140527134815-013|2015-03-10(R1.1)

number of zeroes).
Instance
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value indicates that occasional drops of measurement
Reason
reports are allowed.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.25 Priority to FDD or TDD(PS)

Full Name
Priority to FDD or TDD(PS)
Abbreviated Name
fddTddPrio_Ps
Managed Object

2-1586
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the priority control of FDD/TDD handovers.

If a cell has both FDD and TDD adjacent cells, the FDDTDDPrio_PS
parameter is used to control the priority of target cell selection,
which indicates whether handover to a FDD or TDD cell is preferred.
Instance
Related FG
0: Priority to FDD
1: Priority to TDD
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value is set to 0 because there are more FDD networks
Reason
than TDD networks.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.26 RSCP threshold to FDD in load handover(PS)

2-1587
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
RSCP threshold to FDD in load handover(PS)
Abbreviated Name
loadHoRscpThsFdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is applicable to PS traffic handovers. Firstly, you

should configure a traffic handover threshold and an inter-RAT
handover switch. This parameter is used in making a decision of
handing over to a 3G cell after traffic is overloaded. The BSC
reserves at least HoRSCP_N_FDD_PS (a number) average values
for a UTRAN adjacent cell. When at least HoRSCP_P_FDD_PS
out of the latest HoRSCP_N_FDD_PS average values are
larger than or equal to the sum of LoadHoRSCPThsFDD_PS
and HoRSCPOffset3G_PS, a PS traffic handover from GSM to
UTRAN can be triggered. The value should be smaller than
HoRSCPThsFDD_PS.
Instance
Related FG
0..63
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Generally, -75 dBm can ensure handover success.
Reason
Change take effect
No
2-1588
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.29.27 Ec/No threshold to FDD in load handover(PS)

Full Name
Ec/No threshold to FDD in load handover(PS)
Abbreviated Name
loadHoEcNoThsFdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is applicable to PS traffic handover. Firstly, you

should configure a PS traffic handover threshold and inter-RAT
reserves at least HoEcNo_N_FDD_PS average values for a UTRAN
adjacent cell. When at least HoEcNo_P_FDD_PS out of the latest
HoEcNo_N_FDD_PS average values are larger than or equal to the
sum of LoadHoEcNoThsFDD_PS and HoRSCPOffset3G_PS, a PS
traffic handover from GSM to UTRAN can be triggered. The value
should be smaller than HoEcNoThsFDD_PS.
Instance
Related FG
0..49
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-1589
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
needed.
Generally, larger than 25 dB Ec/No can ensure handover success.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.28 RSCP threshold to TDD in load handover(PS)

Full Name
RSCP threshold to TDD in load handover(PS)
Abbreviated Name
loadHoRscpThsTdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is applicable to PS traffic handover. Firstly,

you should configure a traffic handover threshold and inter-RAT
reserves at least HoRSCP_N_TDD_PS average values for a UTRAN
adjacent cell. When at least HoRSCP_P_TDD_PS out of the latest
HoRSCP_N_TDD_PS average values are larger than or equal to
the sum of LoadHoRSCPThsTDD_PS and HoRSCPOffset3G_PS,
a PS traffic handover from GSM to UTRAN can be triggered. The
value should be smaller than HoRSCPThsFDD_PS.
Instance
Related FG
0..63
2-1590
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.29 RSCP threshold to FDD(PS)

Full Name
RSCP threshold to FDD(PS)
Abbreviated Name
hoRscpThsFdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1591
SJ-20140527134815-013|2015-03-10(R1.1)
Description
If there are at least HoRSCP_N_FDD_PS average values

reserved for an adjacent UTRAN cell in the BSC and at least
HoRSCP_P_FDD_PS out of HoRSCP_N_FDD latest RSCP average
values are not smaller than the sum of HoRSCPThsFDD_PS and
HoRSCPOffset3G_PS, a PS handover from GSM to UTRAN can
be triggered. This adjacent cell is the candidate target cell for the
PS handover.
Instance
Related FG
0..63
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.30 P of handovering to FDD by RSCP(PS)

2-1592
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
P of handovering to FDD by RSCP(PS)
Abbreviated Name
hoRscp_P_Fdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A PS handover from GSM to UTRAN can be triggered when at least

HoRSCP_P_FDD_PS out of HoRSCP_N_FDD_PS RSCP average
values are not smaller than the sum of HoRSCP_THS_FDD_PS
and HoRSCPOffset3G_PS.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
HoEcNo_N_FDD_PS
The value of HoRSCP_P_FDD_PS cannot be greater than
Parameters
HoRSCP_N_FDD_PS.
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value is set to 3 to ensure rapid and correct handover.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2-1593
SJ-20140527134815-013|2015-03-10(R1.1)
2.29.31 N of handovering to FDD by RSCP(PS)

Full Name
N of handovering to FDD by RSCP(PS)
Abbreviated Name
hoRscp_N_Fdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

HoRSCP_P_FDD_PS out of HoRSCP_N_FDD_PS RSCP average
values are not smaller than the sum of HoRSCP_THS_FDD_PS
and HoRSCPOffset3G_PS.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1594
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.100/V6.30.100
N/A
2.29.32 EcNo threshold to FDD(PS)

Full Name
EcNo threshold to FDD(PS)
Abbreviated Name
hoEcNoThsFdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If there are at least HoEcNo_N_FDD_PS average values

reserved for an adjacent UTRAN cell in the BSC and at least
HoEcNo_P_FDD_PS out of HoEcNo_N_FDD_PS latest RSCP
average values are not smaller than the sum of HoEcNoThsFDD_PS
and HoEcNoOffset3G_PS, a PS handover from GSM to UTRAN
can be triggered. This adjacent cell is the candidate target cell for
the PS handover.
Instance
Related FG
0..49
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Generally, larger than 25 dB Ec/No can ensure handover success.
Reason
Change take effect
2-1595
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.29.33 P of handovering to FDD by EcNo(PS)

Full Name
P of handovering to FDD by EcNo(PS)
Abbreviated Name
hoEcNo_P_Fdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

HoEcNo_P_FDD_PS out of HoEcNo_N_FDD_PS Ec/No average
values are not smaller than the sum of HoEcNoThsFDD_PS and
HoEcNoOffset3G_PS.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
HoEcNo_N_FDD_PS
The value of HoEcNo_P_FDD_PS cannot be greater than
Parameters
HoEcNo_N_FDD_PS.
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1596
SJ-20140527134815-013|2015-03-10(R1.1)
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.29.34 N of handovering to FDD by EcNo(PS)

Full Name
N of handovering to FDD by EcNo(PS)
Abbreviated Name
hoEcNo_N_Fdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

HoEcNo_P_FDD_PS out of HoEcNo_N_FDD_PS Ec/No average
values are not smaller than the sum of HoEcNoThsFDD_PS and
HoEcNoOffset3G_PS.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1597
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.29.35 RSCP threshold to TDD(PS)

Full Name
RSCP threshold to TDD(PS)
Abbreviated Name
hoRSCPThsTdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter defines a threshold. If there are at least

HoRSCP_N_TDD_PS RSCP average values reserved for an
adjacent UTRAN cell in the BSC and at least HoRSCP_P_TDD_PS
out of HoRSCP_N_TDD_PS latest RSCP average values
are not smaller than the sum of HoRSCPThsTDD_PS and
PS handover.
Instance
2-1598
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..63
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.36 N of handovering to TDD by RSCP(PS)

Full Name
N of handovering to TDD by RSCP(PS)
Abbreviated Name
hoRSCP_N_Tdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1599
SJ-20140527134815-013|2015-03-10(R1.1)
Description

PS handover.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2-1600
SJ-20140527134815-013|2015-03-10(R1.1)
2.29.37 P of handovering to TDD by RSCP

Full Name
P of handovering to TDD by RSCP
Abbreviated Name
hoRSCP_P_Tdd_Ps
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

PS handover.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
HoRSCP_N_TDD_PS
The value of HoRSCP_P_TDD_PS cannot be greater than
Parameters
HoRSCP_N_TDD_PS.
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
2-1601
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.29.38 2110~2170M frequency band permitted for traffic

handover(FDD)
Full Name
2110~2170M frequency band permitted for traffic handover(FDD)
Abbreviated Name
FDDTrafficHoFreqCtl_0
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The FDD frequency bands allowed as traffic handover targets

should be set according to requirements.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Select FDD frequency bands that absorb traffic as traffic handover
target cells according to network conditions.
Reason
2-1602
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A

handover(FDD)
Full Name
Abbreviated Name
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1603
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

handover(FDD)
Full Name
Abbreviated Name
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1604
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.41 Other Frequency band permitted for traffic handover(FDD)

Full Name
Other Frequency band permitted for traffic handover(FDD)
Abbreviated Name
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
0
2-1605
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

If none of the bands represented by FDDTrafficHoFreqCtl_0,
FDDTrafficHoFreqCtl_1, and FDDTrafficHoFreqCtl_2 is allowed,
select FDDTrafficHoFreqCtl_7, which means other bands.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

handover(TDD)
Full Name
2010~2025M frequency band permitted for traffic handover(TDD)
Abbreviated Name
TDDTrafficHoFreqCtl_0
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The TDD frequency bands allowed as traffic handover targets

2-1606
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Select TDD frequency bands that absorb traffic as traffic handover
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

handover(TDD)
Full Name
1880~1900M frequency band permitted for traffic handover(TDD)
Abbreviated Name
Managed Object

2-1607
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.29.44 Other Frequency band permitted for traffic handover(TDD)

Full Name
Other Frequency band permitted for traffic handover(TDD)
2-1608
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

If none of the bands represented by TDDTrafficHoFreqCtl_0 and
TDDTrafficHoFreqCtl_1 is allowed,
select TDDTrafficHoFreqCtl_2, which means other bands.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1609
SJ-20140527134815-013|2015-03-10(R1.1)
2.29.45 Support Handover to 3G Cell Base on Cell load

Full Name
Support Handover to 3G Cell Base on Cell load
Abbreviated Name
LoadHoTo3GEnable
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether load balancing handovers to 3G

neighbor cells are supported. If this parameter is set to 1, the
function is enabled. If this parameter is set to any other value, the
function is disabled.
Instance
Cell
Related FG
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
GHandoverControl.hoControlLoad_L
GUtranHandoverControl.interSysHoCtrl
When this parameter and the related parameters (GHandoverCon-
Parameters
trol.hoControlLoad_L and GUtranHandoverControl.interSysHoCtrl)

are enabled, load balancing handovers to 3G cells are supported.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If this cell is configured with 3G neighbor cells and cannot be
allocated with service channels, MSs can try to redirect to a 3G

neighbor cell under the permission of this switch.
Reason

Change take effect
No
2-1610
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.30 Site(GBtsSiteManager)
2.30.1 Site ID
Full Name
Site ID
Abbreviated Name
GBtsSiteManagerId
Managed Object
Site(GBtsSiteManager)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a site ID.
Instance
BSC
Related FG
N/A
1..65534
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1611
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path
GUI: Managed Element->GSM Logical Configuration->Site

Information Configuration->Site
N/A
2.30.2 GBtsEquipment DN
Full Name
GBtsEquipment DN
Abbreviated Name
refGBtsEquipment
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The DN of A physical site.
Instance
Site
Related FG
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1612
SJ-20140527134815-013|2015-03-10(R1.1)
Configure this parameter according to site planning.
A physical site must be configured.
Reason
Change take effect
Yes
Access
Read
OMC Access path

N/A
2.30.3 Config Paging Repeat Support

Full Name
Config Paging Repeat Support
Abbreviated Name
CfgPagingRepSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the site type is 8018,8112,8202,8206, the Site decides

whether to use the BSC's Paging Repeat parameters base on this
parameter.
Instance
Site
Related FG
N/A
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1613
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Set this parameter according to the base station version.
Set this parameter according to the base station version.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.30.4 Inter SubCell handover permitted

Full Name
Inter SubCell handover permitted
Abbreviated Name
SubCellHO
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
In most cases, subcells of the same site have nearly the same
coverage radius. An MS can be directly handed over between these
subcells.
Instance
SITE
Related FG
0: not allowed
1: allowed
2: According to radio measurement
Unit
N/A
2-1614
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If subcells of the same site have nearly the same coverage radius,
the parameter value can be set to "allowed", which allows direct

handover to the second subcell from the second subcell. If the
coverage radius of the second subcell significantly different from
that of the first subcell, specially if multiple SDR antennas are used
for transmitting, you can set the parameter value to "According
to radio measurement". If the cell coverage is large and subcell
handover inside the cell requires a strict decision made on the basis
of TA measurement, it is not appropriate to set the parameter value
to "According to radio measurement" (because the TA of the target
cell cannot be measured for inter-cell handover).
If it is not suitable to set the parameter value to "allowed" or
"According to radio measurement", or if the indexes such as
handover success rate and call drops caused by handover are
unacceptable when these two settings are used, you can set the
parameter value to "not allowed", which means MSs can only be
handed over to the first cell.
In most cases, subcells of the same site have nearly the same
Reason
coverage radius. An MS can be directly handed over between these

subcells.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1615
SJ-20140527134815-013|2015-03-10(R1.1)
2.30.5 Support new abis ps message

Full Name
Support new abis ps message
Abbreviated Name
SupNewAbisPsMsg
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a feature switch. Default: off.
Instance
Cell
Related FG
N/A
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Set this parameter value according to whether the site supports the
new Abis PS message format. If it does, turn on the switch. If it

does not, the switch must be turned off.
This parameter is a feature switch. Default: off.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2-1616
SJ-20140527134815-013|2015-03-10(R1.1)
2.30.6 The Abis band limit of HR priority

Full Name
The Abis band limit of HR priority
Abbreviated Name
bwrestorelimit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
HR is assigned when IP transmission occupies much bandwidth.
Instance
SITE
Related FG
ZGO-05-05-005 Abis Triggered FR/HR Adaptation
0..100
Unit
Default Value
70
Related Parameters
frtohrbwlimit
frtohrbwlimit >= bwrestorelimit
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If IP transmission is congested, you can decrease the parameter
value.
HR is assigned when IP transmission occupies much bandwidth.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1617
SJ-20140527134815-013|2015-03-10(R1.1)
2.30.7 The Abis band of HO from FR to HR

Full Name
The Abis band of HO from FR to HR
Abbreviated Name
frtohrbwlimit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The default value means that when IP transmission bandwidth is

congested, FR subscribers start to be handed over and become
HR subscribers.
Instance
SITE
Related FG
ZGO-05-05-005 Abis Triggered FR/HR Adaptation
0..100
Unit
Default Value
90
Related Parameters
bwrestorelimit
frtohrbwlimit >= bwrestorelimit
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If IP transmission is congested, you can decrease the parameter
value.
The default value means that when IP transmission bandwidth is
Reason
congested, FR subscribers start to be handed over and become

HR subscribers.
Change take effect
No
Access
Read/Write
OMC Access path

2-1618
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.30.8 Minimal number of idle E1 Abis Timeslot

Full Name
Minimal number of idle E1 Abis Timeslot
Abbreviated Name
MinAccessAbisThsE1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The default value is based on the lowest maximum bandwidth used

by a subscriber to ensure that one subscriber can use the bandwidth.
Instance
Cell
Related FG

0..64
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is larger, access becomes more difficult. To provide
access for more users, lower the threshold.
Reason
Change take effect
No
0
2-1619
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.30.9 Minimal of usable IP Abis bandwidth

Full Name
Minimal of usable IP Abis bandwidth
Abbreviated Name
MinAccessAbisThsIP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

0..4294967295
Unit
kbps
Default Value
64
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is larger, access becomes more difficult. To provide
access for more users, lower the threshold.
Reason
Change take effect
2-1620
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.30.10 the master power control option for Base Transceiver

Station
Full Name
the master power control option for Base Transceiver Station
Abbreviated Name
BtsMasterPwCtrlOp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a site supports intelligent TRX

shutdown when the main power fails.
Instance
Site
Related FG
ZGO-04-04-006 Intelligent TRX Shutdown Triggered by Main Power

Failure
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1621
SJ-20140527134815-013|2015-03-10(R1.1)
The intelligent TRX shutdown function is disabled by default. If a
standby power source (battery) is available at the site, this function

can be enabled to prevent a failure of the site when the AC power
fails.
By default, the intelligent TRX shutdown function is disabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.30.11 the delay time of master power Off

Full Name
the delay time of master power Off
Abbreviated Name
MasterPwrOffTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a delay time before the BSC, after

receiving the information of a power failure at a site, confirms the
power failure. It is used to prevent misoperation caused by unstable
power supply.
Instance
Site
Related FG

Failure
5..480
Unit
Min
Default Value
Related Parameters
N/A
2-1622
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the delay time is too long, the BSC cannot react to the power
failure at a site timely. No TRX is shutdown during the delay and the
standby power is consumed quickly.
If the delay time is too short, the BSC may determine that the link to
a site is broken in case of temporary failure due to unstable power
supply at the site and take incorrect actions.
The default value is set to the time for waiting for the site to start.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.30.12 the delay time of Transceivers Off

Full Name
the delay time of Transceivers Off
Abbreviated Name
TrxOffTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a delay time before the shutdown of all

non-BCCH TRXs is confirmed.
2-1623
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Site
Related FG

Failure
0..640
Unit
Min
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the delay time is too long, some non-BCCH TRXs cannot be shut
down timely, the standby power is consumed too fast, and the cells
of the site is out of service soon.
The default value indicates that the shutdown of non-BCCH TRXs
Reason
is started immediately to maintain the power supply to the BCCH

TRXs by making full use of the standby power.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.30.13 the Percent for Transceivers Off

Full Name
the Percent for Transceivers Off
Abbreviated Name
TrxOffPercent
Managed Object
2-1624
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the percentage of non-BCCH TRXs to

be shut down.
Instance
Site
Related FG

Failure
0..100
Unit
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the auxiliary power
configuration at the site. The larger the parameter value is, the more
TRXs are shut down.
The default value is set to shut down a small percent of TRXs to
Reason
avoid serious congestion.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1625
SJ-20140527134815-013|2015-03-10(R1.1)
2.30.14 the GNode id for master power control

Full Name
the GNode id for master power control
Abbreviated Name
MasterPwCtrlGNode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the sequence number of the dry contact

that is used for monitoring the main power.
Instance
Site
Related FG

Failure
1..12
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the site configuration.
The default value is set according to the site configuration.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1626
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.30.15 Benchmark Site

Full Name
Benchmark Site
Abbreviated Name
BenchmarkSite
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BTS is the benchmark BTS

for soft synchronization of the air interface.
Instance
Site
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the actual requirement.
Generally, a BTS uses the GPS clock source.
No default value is set.
Reason
Change take effect
No
Access
Read/Write
2-1627
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.31 Site baseband share

Configuration(GSiteBaseBandShare)
2.31.1 Site baseband share Configuration ID
Full Name
Site baseband share Configuration ID
Abbreviated Name
GSiteBaseBandShareId
Managed Object
Site baseband share Configuration(GSiteBaseBandShare)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a site baseband sharing configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
2-1628
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Site baseband share Configuration
N/A
2.31.2 Baseband resource share support

Full Name
Baseband resource share support
Abbreviated Name
BaseBandShare
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
It is site level switch of Baseband resource sharing.
Instance
Site
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
BaseBandShare
When BSC and site-level switch is on, the Baseband resource
Parameters
sharing is valid.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The switch can be turned on according to operator requirements if
the traffic has the tide distribution phenomenon.

2-1629
SJ-20140527134815-013|2015-03-10(R1.1)
It is a feature-related switch. The default parameter value is set to
Reason
"0 (Not Support)".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.31.3 Traffic threshold for allocate baseband

Full Name
Traffic threshold for allocate baseband
Abbreviated Name
bbRequestTraThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the cell traffic is relatively high, the transceivers can be

selected to allocate baseband resources.
Instance
Site
Related FG
0..100
Unit
Default Value
70
Related Parameters
bbReleaseTraThs
BBURequestTRAThs>BBUReleaseTRAThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1630
SJ-20140527134815-013|2015-03-10(R1.1)
If the value is too large, transceiver baseband resources start to
be allocated after a cell is congested. This causes the cell to be

more congested. If the value is too small, an idle cell may take large
quantities of baseband resources.
When the cell traffic is relatively high, the transceivers can be
Reason
selected to allocate baseband resources.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.31.4 Traffic threshold for release baseband

Full Name
Traffic threshold for release baseband
Abbreviated Name
bbReleaseTraThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the traffic threshold used for release of

baseband resources. The BSC checks the traffic in a cell upon
receiving a performance statistics report. If the traffic in a cell is
lower than this threshold, the BSC selects appropriate TRXs of the
cell to release baseband resources.
Instance
Site
Related FG
0..100
Unit
Default Value
Related Parameters
bbRequestTraThs
2-1631
SJ-20140527134815-013|2015-03-10(R1.1)
BBURequestTRAThs>BBUReleaseTRAThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is too large, baseband resources may be
released in a cell even when the cell is busy. If the parameter value
is too small, baseband resources are not released in a cell even
when the cell is idle.
The default value is set to ensure that the baseband resources are
Reason
in use.
When the parameter is set to 0, no baseband resource is released
even if a cell is in idle status.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.31.5 Channel busy threshold for urgent allocate baseband

Full Name
Channel busy threshold for urgent allocate baseband
Abbreviated Name
bbOverThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the realtime cell channel occupancy rate is high, transceivers

are immediately selected to allocate baseband resources.
Instance
Site
2-1632
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..100
Unit
Default Value
80
Related Parameters
bbLowerThs
BBUOVERThs>BBULOWERThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is too large, transceiver baseband resources start to
be allocated after a cell is congested. This causes the cell to be

more congested. If the value is too small, an idle cell may take large
quantities of baseband resources.
When the realtime cell channel occupancy rate is high, transceivers
Reason
are immediately selected to allocate baseband resources.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.31.6 Channel busy threshold for urgent release baseband

Full Name
Channel busy threshold for urgent release baseband
Abbreviated Name
bbLowerThs
Managed Object

3GPP Name
N/A
2-1633
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the channel occupancy threshold used for

release of baseband resources. If a cell on a site fails to request
baseband resources, the BSC locates cells on the same site, which
have radio channel occupancy lower than this threshold, and then
selects appropriate TRXs to release baseband resources.
Instance
Site
Related FG
0..100
Unit
Default Value
60
Related Parameters
bbOverThs
BBUOVERThs>BBULOWERThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is too large, more cells can be selected to
release baseband resources. If the parameter value is too small,

fewer cells can be selected to release baseband resources.
The default value is set to prevent a busy cell from releasing
Reason
baseband resources.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1634
SJ-20140527134815-013|2015-03-10(R1.1)
2.32 Bvc (GBvc)

2.32.1 Bvc ID
Full Name
Bvc ID
Abbreviated Name
GBvcId
Managed Object
Bvc (GBvc)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a Bvc ID.
Instance
BSC
Related FG
N/A
1..8
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Bvc
2-1635
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.32.2 BvcI
Full Name
BvcI
Abbreviated Name
BVCI
Managed Object
Bvc (GBvc)
3GPP Name
BVCI
3GPP Reference
N/A
Description
A BSSGP Virtual Connection (BVC) provides a method for

communication among BSSGP entities. BVCs are the basis for the
transmission of BSSGP PDUs among peer Point-To-Point (PTP),
Point-To-Multipoint (PTM), and signaling entities.
Each BVC has an ID, namely BVCI. It allows lower-layer services
to efficiently route BSSGP PDUs to peer entities. Under a Network
Service Entity (NSE), each GPRS cell is uniquely identified by a
BVCI, and one NSE has only one BVC whose BVCI is 0.
Instance
Cell
Related FG
N/A
2..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1636
SJ-20140527134815-013|2015-03-10(R1.1)
Under a Network Service Entity (NSE), each GPRS cell is uniquely
identified by a BVCI, and one NSE has only one BVC whose BVCI
is 0. The parameter value is determined when the cell is configured,
and does not need any change. This parameter must be unique
under a SGSN. If the configuration is wrong, the PS service of the
cell may be unavailable.
Set the parameter value according to the ground parameter
Reason
planning.
Change take effect
Yes
Access
Restricted
OMC Access path

N/A
2.32.3 FR NSE DN
Full Name
FR NSE DN
Abbreviated Name
refGFrGbNse
Managed Object
Bvc (GBvc)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of a FR NSE, which is used to find

the corresponding NSEI.
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-1637
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
A planned interconnection parameter.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.32.4 IP NSE DN
Full Name
IP NSE DN
Abbreviated Name
refGIpGbNse
Managed Object
Bvc (GBvc)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of an IP NSE, which is used to find

the corresponding NSEI.
Instance
Cell
Related FG
N/A
Unit
N/A
2-1638
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.33 GPRS Configuration(GCellPs)

2.33.1 GPRS Configuration ID
Full Name
GPRS Configuration ID
Abbreviated Name
GCellPsId
Managed Object
GPRS Configuration(GCellPs)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a GPRS configuration ID.
2-1639
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->GPRS Configuration
N/A
2.33.2 T3168
Full Name
T3168
Abbreviated Name
t3168
Managed Object
3GPP Name
T3168
3GPP Reference
N/A
2-1640
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is used by the MSs. It belongs to GPRS Cell Options

IE parameters. It is broadcasted to MSs in an SI13 message over
the BCCH and a PSI13 message over the PACCH. It defines the
longest duration of waiting for a PACKET UPLINK ASSIGNMENT
message after an MS sends a PACKET RESOURCE REQUEST
message, a PACKET DOWNLINK ACK/NACK message that carries
a Channel Request Description IE, or a PACKET CONTROL
ACKNOWLEDGEMENT message requesting a new TBF.
Timer starts: at sending a PACKET RESOURCE REQUEST
message, a PACKET DOWNLINK ACK/NACK message that carries
a Channel Request Description IE, or a PACKET CONTROL
ACKNOWLEDGEMENT message requesting a new TBF.
Timer stops: on reception of a PACKET UPLINK ASSIGNMENT
message, or a PACKET TIMESLOT RECONFIGURE message
that assigns uplink TBFs and on reception of a PACKET ACCESS
REJECT message that rejects uplink TBFs.
Action at expiry: re-initiating the packet access procedure or
re-transmitting a PACKET RESOURCE REQUEST message or
PACKET DOWNLINK ACK/NACK message.
Instance
Cell
Related FG
ZGB-03-05-008 Two Phase Access
0: 0.5
1: 1
2: 1.5
3: 2
4: 2.5
5: 3
6: 3.5
7: 4
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1641
SJ-20140527134815-013|2015-03-10(R1.1)
The parameter value affects the duration and success rate of uplink
TBF creation. If the value is small, the duration allowed to wait for
packet uplink allocation is short. If TBF creation fails, the average
delay of packet access is short, but the TBF creation success
rate in a harsh wireless environment is low. In addition, if the
parameter value is too small, the probability of resending packet
access requests increases, so that the probability of re-allocation
on the network side increases and system resources are wasted. If
the parameter value is large, the duration allowed to wait for packet
uplink allocation is long. If TBF creation fails, the average delay of
packet access is long, but the TBF creation success rate in a harsh
wireless environment is raised. The parameter value can be set
according to the requirements for network delay and wireless quality.
The default value is set based on a normal wireless environment.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.3 T3192
Full Name
T3192
Abbreviated Name
t3192
Managed Object
3GPP Name
T3192
3GPP Reference
N/A
2-1642
SJ-20140527134815-013|2015-03-10(R1.1)
Description

IE parameters. It is broadcasted to MSs in an SI13 message
over the BCCH and a PSI13 message over the PACCH. During
downlink packet transmission, timer T3192 is triggered when the MS
receives all the RLC data blocks. When timer T3192 expires, the
MS releases the resources associated with the TBF (for example,
TFI) and starts monitoring its paging channel.
Timer starts: at sending a PACKET DOWNLINK ACK/NACK
message with Final Ack Indicator = 1, or at sending a PACKET
CONTROL ACK message as a response to the final RLC data block
in unacknowledged mode.
Timer restarts: at sending a PACKET DOWNLINK ACK/NACK
message with Final Ack Indicator = 1, or at sending a PACKET
CONTROL ACK message as a response to the final RLC data block
in unacknowledged mode.
Action at expiry: If the MS is in packet transfer mode when the
timer expires and there are no other ongoing TBFs, it releases the
resources, stops monitoring the PDCH, and starts monitoring the
paging channel.
Timer stops: at the reception of a PACKET DOWNLINK
ASSIGNMENT or PACKET TIMESLOT RECONFIGURE message
before timer T3192 expires.
Instance
Cell
Related FG
N/A
0: 500
1: 1000
2: 1500
3: 0
4: 80
5: 120
6: 160
7: 200
Unit
ms
Default Value
Related Parameters
t3193
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1643
SJ-20140527134815-013|2015-03-10(R1.1)
If the parameter value is large, the keeping duration of TBF
resources (including TFIs and timeslots) are long. If there is no

subsequent downlink data transmission, invalid resources are
occupied for a long time, which leads to congestion.
If the parameter value is small, because the MS releases TBF
resources quickly, the network must initiate paging or immediately
allocate a flow on the coming of new downlink data (if the MS is
in Ready status). In this case, therefore, the duration of downlink
TBF creation is long. If the T3192 timer has not expired when new
downlink data on the network side comes, the network can directly
send a PACKET DOWNLINK ASSIGNMENT message to create a
new downlink TBF and shorten the period of TBF creation.
To set the parameter value, on the one hand, you should take an
appropriate T3192 value by assessing the average time interval
between two times of downlink data transmission. On the other
hand, provided that the service load and model of the cell are fully
considered and network resources are abundant, you should set the
T3192 value as large as possible to decrease the new TBF creation
duration and raise the data transmission rate.
There is a corresponding timer, T3193 on the network side. It is
required that T3193 must be larger than T3192.
The default value is set according to a common radio environment
Reason
(normally 500 ms).
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.4 T3193
Full Name
T3193
Abbreviated Name
t3193
Managed Object
2-1644
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
T3193
3GPP Reference
N/A
Description
This parameter is timer T3193, which is used for protection on TBF

release during downlink packet transmission. For details, refer to
the description of T3191. The conditions for starting and stopping
this timer and the actions after the timer expires are as follows:
Timer starts/restarts: If the BSC receives a PACKET DOWNLINK
ACK/NACK (RLC mode is ACK mode) message or PACKET
CONTROL ACKNOWLEDGE (RLC mode is NACK mode) message
with FAI = 1, T3191 stops and T3193 starts.
Timer stops: When a new downlink TBF in the network uses the
same TFI, T3193 stops.
Action at expiry: releasing the TFI resource.
The value should be greater than timer T3192 to ensure that the MS
releases the TFI before the BSC does.
Instance
BSC
Related FG
N/A
0..65535
Unit
10ms
Default Value
51
Related Parameters
t3192
The length of the global resource timer T3193 must be long than the
Parameters
timer T3192 of any cell.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The delay policy is used for T3192/T3193. Although downlink
resources are wasted, the network can directly send a PACKET

DOWNLINK ASSIGNMENT message within the T3192/T3193
duration to create a new downlink TBF and shorten the TBF creation
duration. If the T3192/T3193 expires, the network can only create
a TBF by initiating paging or the immediate assignment flow (if the
MS is in Ready status). In this case, the creation of a downlink TBF
takes a long time.
Therefore, to set T3192/T3193, you should fully consider the service
load of the cell. When network resources are abundant, you should
set the parameter value as larger as possible to reduce new TBF
2-1645
SJ-20140527134815-013|2015-03-10(R1.1)
creation duration, raise the data transmission rate, and effectively

raise downlink throughput.
Because T3193 is a network-side parameter, it must be slightly
larger than T3192.
This timer is slightly larger than T3192.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.5 DRX mode holding timer

Full Name
DRX mode holding timer
Abbreviated Name
drxTimeMax
Managed Object
3GPP Name
DRX_TIMER_MAX
3GPP Reference
N/A
Description

the BCCH and a PSI13 message over the PACCH, indicating the
value of the DRX_TIMER_MAX parameter. The DRX_TIMER_MAX
parameter controls the duration of non-DRX mode. In the following
two cases, the MS enters non-DRX mode:
1. at the transition from packet transfer mode to packet idle mode.
2. at the transition from Dual Transfer Mode (DTM) to dedicated
mode or packet idle mode.
The non_DRX mode duration is determined by the smaller
value between the NON_DRX_TIMER and DRX_TIMER_MAX
parameters. The DRX_TIMER_MAX parameter is broadcasted
in cell system information. The NON_DRX_TIMER parameter is
2-1646
SJ-20140527134815-013|2015-03-10(R1.1)
obtained through the negotiation with the CN side in the GPRS

ATTACH procedure.
Instance
Cell
Related FG
N/A
0: 0(0)
1: 1(1)
2: 2(2)
3: 4(4)
4: 8(8)
5: 16(16)
6: 32(32)
7: 64(64)
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In non-DRX mode, because an immediate assignment command
can be sent over all PCH and AGCH channels. This process takes
40 ms, and is much faster than sending an immediate assignment
command in DRX mode. Therefore the TBF creation duration in
non-DRX mode is short. In DRX mode, however, the MS can only
listen to paging messages in the home paging group, and then
receive immediate assignment messages in all paging blocks and
AGCH reservation blocks. The period of receiving a paging message
is long and is about half of the period of a paging multiframe on
average. When BS_PA_MFRMS is 2, it is about 235 ms.
But in non-DRX mode, MS power consumption increases.
Therefore, if the DRX_Timer_Max value is large, the TBF creation
duration can be shortened, but MS power consumption increases.
If the value is small, MS power consumption is reduced, but the
paging flow added in the DRX mode causes system signaling load
and data transmission delay to increase.
The default value of BS_PA_MFRMS is 5, and the paging cycle is
Reason
1.18 s. The parameter value (2 s) is larger than this value, and a

TBF can be quickly established in this period time.
2-1647
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.6 MAX blocks transmission in each TS

Full Name
MAX blocks transmission in each TS
Abbreviated Name
bsCvMax
Managed Object
3GPP Name
BS_CV_MAX
3GPP Reference
N/A
Description
This parameter is used by the MSs. It belongs to GPRS Cell

Options IE parameters. If no PBCCH is available, it is broadcasted
to MSs in a SI13 message. BS_CV_MAX indicates the maximum
countdown value (start countdown value), and is used for calculating
the Countdown Value (CV).
The MS should send the Countdown Value (CV) in each uplink RLC
data block to indicate the absolute sequence number BSN' of the
RLC data blocks to be transmitted in the uplink TBF. The CV should
be calculated as follows:
Where:
TBC = total number of RLC data blocks currently to be transmitted
in the TBF.
BSN' = absolute block sequence number of the RLC data block,
range: 0 to (TBC - 1).
NTS = number of timeslots assigned to the uplink TBF, range: 1 to 8.
K = 2 when the Modulation and Coding Scheme (MCS) in use is
MCS-7, MCS-8 or MCS-9, otherwise K = 1.
The round() function rounds upwards to the nearest integer.
2-1648
SJ-20140527134815-013|2015-03-10(R1.1)
The result of the above division operation is non-integer and is zero

only when TBC - BSN' - 1 = 0.
This parameter is also used to determine the duration of timer T3200
used by MSs in non-DRX mode:
T3200 = 4 * duration defined by BS_CV_MAX
In addition, this parameter determines the value of the N3104max
parameter:
N3104_MAX = 3 * (BS_CV_MAX + 3) * NTS
Instance
Cell
Related FG
N/A
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the extended uplink function is not enabled on the network or the
MS does not support the GERAN feature package 1 function, the MS

does not support the extended uplink function. When the MS enters
the countdown process, all new uplink LLC data needs to be sent in
the next TBF. From the network performance angle, the countdown
start value should not be too large. In addition, in actual network
environments, some specific MSs do not support the largest value
15. In the above two cases, the parameter value can be decreased.
If the extended uplink function is enabled on the network and the MS
supports the GERAN feature package 1 function, the largest value
of the parameter has no negative effect and is recommended to use.
This parameter determines the T3200 and N3104MAX parameters
Reason
on the MS side. To tolerate anomalies, it is good to set the

parameter to a larger value.
Change take effect
No
2-1649
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.33.7 Packet control acknowledgement type

Full Name
Packet control acknowledgement type
Abbreviated Name
ctrAckType
Managed Object
3GPP Name
CONTROL_ACK_TYPE
3GPP Reference
N/A
Description
This parameter is used by the MSs. It belongs to GPRS Cell

Options IE parameters. If no PBCCH is available, the parameter is
broadcasted to MSs in an SI13 message. This parameter is a binary
representation of the default format of the PACKET CONTROL
ACKNOWLEDGMENT message.
Instance
Cell
Related FG
N/A
0: Four access bursts

1: RLC/MAC control block
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The two formats do not affect the sending success rate of PACKET
CONTROL ACKNOWLEDGEMENT messages. Do not modify the

paramter value and use the default value.
2-1650
SJ-20140527134815-013|2015-03-10(R1.1)
RLC/MAC control blocks are generally used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.8 Access burst type

Full Name
Access burst type
Abbreviated Name
accessType
Managed Object
3GPP Name
ACCESS_BURST_TYPE
3GPP Reference
N/A
Description

the BCCH or in a PSI13 message over the PACCH. This parameter
indicates whether the 8-bit or 11-bit access burst shall be used in
PRACH, PTCCH/U, and PACKET CHANNEL REQUEST messages.
Instance
Cell
Related FG
ZGB-03-05-005 8/11 bit Access Burst
0: 8 bits
1: 11 bits
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1651
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
The 11-bit function can lower the requirement for uplink signaling
Carrier-to-Interference Ratio (CIR). Because there is no widespread

field application experience, be cautious when enabling this function.
It is a feature-related switch. The default parameter value is set to 0.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.9 N3102 decrease step

Full Name
N3102 decrease step
Abbreviated Name
panDec
Managed Object
3GPP Name
PAN_DEC
3GPP Reference
N/A
Description

parameters. It is broadcasted to MSs in an SI13 message over the
BCCH and a PSI13 message over the PACCH, indicating the value
of the PAN_DEC, PAN_INC, and PAN_MAX parameters. Each time
the MS performs cell reselection, N3102 is reset to PanMax.
When the MS receives a PACKET UPLINK ACK/NACK message
that allows the advancement of V(S), PAN_INC is added to N3102
(but N3102 cannot exceed PAN_MAX).
When the MS detects the delay condition of (V(S) = V(A) + W(S)),
T3182 starts. When the MS receives the PACKET UPLINK
2-1652
SJ-20140527134815-013|2015-03-10(R1.1)
ACK/NACK message that makes V(S) smaller than V(A) +

W(S), T3182 stops. If T3182 expires, N3102 is decremented by
PAN_DEC. When N3102 < 0, the MS performs an abnormal TBF
release and cell reselection. When any one of PAN_DEC, PAN_INC,
and PAN_MAX is 0, N3102 is invalid.
Instance
Cell
Related FG
N/A
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Adding PAN_MAX and PAN_INC and decreasing PAN_DEC can
reduce the probability of abnormal TBF releases and cell reselection

when the MS cannot receive Packet Uplink Ack, but make the MS
consume wireless resources for a relatively long period with a low
resource utilization rate when the MS cannot send data due to the
halt of the sending window. Decreasing PAN_MAX and PAN_INC
and increasing PAN_DEC readily cause abnormal TBF releases and
cell reselection, and therefore reduce the proportion of normal TBF
releases and affect data transmission rates.
To avoid abnormal TBF releases and cell reselection, PanMax takes
Reason
the maximum value, PanDec takes the minimum value, and PanInc
takes two times of PanDec in reference to the CS RLT principle.
Change take effect
No
2-1653
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.33.10 N3102 increase step

Full Name
N3102 increase step
Abbreviated Name
panInc
Managed Object
3GPP Name
PAN_INC
3GPP Reference
N/A
Description

Instance
Cell
Related FG
N/A
2-1654
SJ-20140527134815-013|2015-03-10(R1.1)
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1655
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.11 N3102 max

Full Name
N3102 max
Abbreviated Name
panMax
Managed Object
3GPP Name
PAN_MAX
3GPP Reference
N/A
Description

Instance
Cell
Related FG
N/A
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1656
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.12 Route area color code

Full Name
Route area color code
Abbreviated Name
raColor
Managed Object
3GPP Name
RA COLOUR
3GPP Reference
N/A
2-1657
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is used by the MSs. It is broadcasted to MSs in the

SI3, SI4, SI7 and SI8 messages. The function of RaColor is similar
to that of Base station Color Code (BCC) in GSM. In some cases,
such as inter-BSC cell reselection, the GPRS network assigns
different RaColor values to adjacent cells with the same route area
code to ensure that MSs can initiate a Routing Area Updating
procedure.
In this way, when an MS receives different RaColor values in cells
with the same routing area code, it initiates a Routing Area Updating
process as if it crosses two different routing areas.
Instance
Cell
Related FG
N/A
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value of RAC is generally the same as LAC, and is set to 0
by default.
The value of RAC is generally the same as LAC, and is set to 0
Reason
by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1658
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.13 Extended measurement report order

Full Name
Extended measurement report order
Abbreviated Name
meaOrder
Managed Object
3GPP Name
MEASUREMENT_ORDER
3GPP Reference
N/A
Description
This parameter is used by the MSs. This parameter is broadcasted

to MSs in a PSI1 message over the PBCCH, indicating the MS
measurement order in the cell.
This parameter also indicates whether PSI5 is sent.
Instance
Cell
Related FG
N/A
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1659
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.33.14 Network control order

Full Name
Network control order
Abbreviated Name
ctrlOrder
Managed Object
3GPP Name
NETWORK_CONTROL_ORDER
3GPP Reference
N/A
Description
NETWORK_CONTROL_ORDER sets how the MS in MM Ready

state sends measurement reports. This parameter uses two bits,
and can be set to NC0, NC1, or NC2. In NC0 mode, the MS
does not send measurement reports and automatically reselects
cells. In NC1 mode, the MS sends measurement reports to the
network and automatically reselects cells. In NC2 mode, the
MS sends measurement reports to the network but does not
automatically reselects cells (the network controls cell reselection).
This parameter is broadcasted to MSs in the SI13 and SI2Quater
messages over the BCCH.
Instance
Cell
Related FG
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the parameter according to network loads, network planning,
and service requirements.
2-1660
SJ-20140527134815-013|2015-03-10(R1.1)
The default parameter value is set based on network situations.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.15 CCCH SplitPGCycle support

Full Name
CCCH SplitPGCycle support
Abbreviated Name
spgcSuport
Managed Object
3GPP Name
SPLIT_PG_CYCLE
3GPP Reference
N/A
Description
This parameter is used by the MSs and BTS. It is broadcasted to

MSs in the PSI13 and SI13 messages, and is delivered to the BTS
when BTS attributes are set. It indicates whether the cell supports
the SPLIT_PG_CYCLE function on the CCCH. The MS indicates
whether it supports the Split on CCCH function and requests to
negotiate the SPLIT_PG_CYCLE value with the CN in the DRX
parameter during a GPRS ATTACH procedure. If this function
is supported by both the MS and cell, the PACKET IMMEDIATE
ASSIGNMENT, PACKET PAGING and PACKET IMMEDIATE
ASSIGNMENT REJECT messages can be sent on multiple blocks
in DRX mode. The block location is obtained according to the
following paging group calculation formula:
PAGING_GROUP (0...M-1) = (((IMSI mod 1000) div (KC x N) x N +
(IMSI mod 1000) mod N + Max((m x M)div SPLIT_PG_CYCLE,
m))mod M
Where:
KC = BS_CC_CHANS (number of CCCHs in the cell)
2-1661
SJ-20140527134815-013|2015-03-10(R1.1)
M = number of paging blocks that can be obtained on one CCCH

block
= (9 - BS_AG_BLKS_RES) x 64 (a CCCH is not combined with
a SDCCH)
= (3 - BS_AG_BLKS_RES) x 64 (a CCCH is combined with a
SDCCH)
N = (9 - BS_AG_BLKS_RES) x BS_PA_MFRMS (a CCCH is not
combined with a SDCCH)
= (3 - BS_AG_BLKS_RES) x BS_PA_MFRMS (a CCCH is combined
with a SDCCH)
SPLIT_PG_CYCLE is the negotiation value between the MS and
CN during a GPRS attach procedure.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function needs the support of MSs, and the parameter period
needs to be negotiated with the CN, affecting MS paging group

calculation. Therefore, it is not recommended to enable this function.
It is a feature-related switch. The default parameter value is set to 0.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1662
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.33.16 Packet access priority threshold

Full Name
Packet access priority threshold
Abbreviated Name
priAcThr
Managed Object
3GPP Name
PRIORITY_ACCESS_THR
3GPP Reference
N/A
Description
This parameter is used by the MSs. It is broadcasted to MSs in the

PSI13 and SI13 messages, indicating the priority level of MS packet
access allowed by the cell. The function of this parameter is similar
to that of ACCESS CLASS.
Instance
Cell
Related FG
N/A
0,3,4,5,6,7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Adjust this value as required if user packet access needs to be
restricted based on service priorities.
In normal cases, access is allowed.
Reason
Change take effect
No
2-1663
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.33.17 USF granularity

Full Name
USF granularity
Abbreviated Name
usfGranularity
Managed Object
3GPP Name
USF_GRANULARITY
3GPP Reference
N/A
Description
This parameter information is assigned to the MS in the PACKET

UPLINK ASSIGNMENT message, indicating that the network
allocates uplink block granularity for the GPRS MS when the cell
uses the medium control mode of dynamic allocation.
Instance
Cell
Related FG
ZGB-03-02-004 MAC Dynamic Allocation Mode
0: allocation granularity is 1 for uplink block

1: allocation granularity is 4 for uplink block
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Consider block utilization, comparison between uplink and downlink
data traffic volumes and whether the wireless resources are enough
to set the parameter value.
2-1664
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is determined according to both block utilization
Reason
and the GPRS traffic model.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.18 Cell support extended uplink TBF

Full Name
Cell support extended uplink TBF
Abbreviated Name
EXT_UTBF
Managed Object
3GPP Name
NW_EXT_UTBF
3GPP Reference
N/A
Description
This parameter indicates if the cell supports extended uplink TBF.

After BSS receives CV=0 uplink block, if the cell supports extended
uplink TBF, it enters into extended uplink TBF status. At this time, it
continues assign uplink block resource to MS. If new uplink data is
required to send during extended uplink, re-establishment of uplink
TBF is not required.
This function requires extended uplink function shall be supported
at MS side.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
2-1665
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
You can set the parameter value according to TBF data transmission
conditions in the network and whether a TBF needs to continue to

wait for data transmission after the last block. (After the function is
enabled, round-trip delay can be shortened.)
Considering MS capabilities and network traffic models, it is
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.19 Extended uplink dynamic allocation support

Full Name
Extended uplink dynamic allocation support
Abbreviated Name
exUpDynSupport
Managed Object
3GPP Name
EXTENDED_DYNAMIC_ALLOCATION
3GPP Reference
N/A
Description
This parameter indicates if cell supports extended uplink dynamic

allocation. While using this function, the MS only need listen USF
allocation with the least timeslot, so you can determine to send
uplink block on all allocated uplink timeslot.
Instance
Cell
2-1666
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
ZGO-03-02-007 MAC Extended Dynamic Allocation
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
ExUpDynSupport
If the BSC-level parameter is turned on, this parameter takes effect.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the MS supports this function, when the PS uplink data has priority
or the uplink wireless resources are sufficient, you can enable this
function. After this function is enabled, the uplink transmission rate
is increased.
The default value is determined based on the radio resource usage
Reason
and PS traffic model.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.20 Uplink delay time

Full Name
Uplink delay time
Abbreviated Name
ulDelayTime
Managed Object
2-1667
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter describes the uplink TBF delay time. When the
uplink TBF is released, if the extended uplink TBF function is not
supported, start this timer to access to the uplink delay state and
wait for the arrival of the downlink LLC.
The uplink TBF is released if the timer expires.
Instance
Cell
Related FG
0..4000
Unit
ms
Default Value
1000
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the parameter value according to Gb interface round-trip delay.
If the delay is long or there is a large interval between uplink and

down link data, the delay can be increased.
The default value is set based on Gb interface round-trip delay.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1668
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.21 Downlink delay time

Full Name
Downlink delay time
Abbreviated Name
dlDelayTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink TBF delay time. When the
downlink TBF is released, start this timer to access to the delay
state and wait for new downlink LLC frame. The downlink TBF is
released if the timer expires.
Instance
Cell
Related FG
ZGB-03-05-013 Delayed TBF Release in DL
500..4000
Unit
ms
Default Value
2000
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the value according to MS and CN round-trip delay. If downlink
data is not continuous and has long intervals, increase the delay.
The default value is set according to MS and CN round-trip delay.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1669
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.33.22 Extended uplink TBF time

Full Name
Extended uplink TBF time
Abbreviated Name
extUlTBFTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the extended uplink TBF delay time. When
the uplink TBF is released, if the extended uplink TBF function is
supported, start this timer to access to the extended uplink TBF
state and wait for new uplink LLC frame. The uplink TBF is released
if the timer expires.
Instance
Cell
Related FG
ZGO-04-02-014 Extended uplink TBF mode
0..3000
Unit
ms
Default Value
1500
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is large, uplink re-establishment is quick but the resource
utilization rate is low. If the value is small, uplink re-establishment is

slow but the resource utilization rate is high.
2-1670
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is determined according to uplink data
Reason
transmission characteristics in common scenarios. The default value

allows an uplink TBF to last to the time when new data transmission
occurs, and does not occupy the network for a long time and waste
uplink resources when there is no subsequent data transmission.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.23 RRBP Interval of GPRS downlink TBF

Full Name
RRBP Interval of GPRS downlink TBF
Abbreviated Name
gprsDlRRBPInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Interval that downlink Gprs TBF requires MS to send Packet

Downlink Ack/Nack.
Instance
Cell
Related FG
3..20
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1671
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is small, in the case of the GPRS service,
the BSC receives downlink received bitmap information sent by an

MS more quickly, but more uplink signaling blocks are occupied. If
the parameter value is large, in the case of the GPRS service, the
BSC receives downlink received bitmap information sent by an MS
more slowly, but fewer uplink signaling blocks are occupied. No
modification is needed unless specially required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.24 Interval number of uplink GPRS TBF's ACK

Full Name
Interval number of uplink GPRS TBF's ACK
Abbreviated Name
gprsUlAckInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the interval that the uplink GPRS TBF
network sends packet uplink ACK/Nack to the MS.
Instance
Cell
Related FG
3..20
2-1672
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is small, in the case of the GPRS service,
BSC's uplink received bitmap information is notified to an MS more

quickly, but more downlink signaling blocks are occupied. If the
parameter value is large, in the case of the GPRS service, BSC's
uplink received bitmap information is notified to an MS more slowly,
but fewer uplink signaling blocks are occupied. No modification is
needed unless specially required.
The default value is set it to 10 when the percentage of the downlink
Reason
voice RQ0-5 is around 97%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.33.25 Uplink measurement report period

Full Name
Uplink measurement report period
Abbreviated Name
ulMeasurePeriod
Managed Object
3GPP Name
N/A
2-1673
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter is used by UPPB, describing the uplink

measurement report period reported by BTS and handled by BSC.
The measurement report is obtained by the BTS in accordance with
the uplink level and quality of the MS.
Instance
Cell
Related FG
ZGO-03-05-002 EGPRS Link Adaptation
400..2000
Unit
ms
Default Value
800
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the parameter value based on the number of received
measurement reports and the measurement report window.
The default value is set based on the number of received
Reason
measurement reports and the measurement report window.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.26 T3142
Full Name
T3142
2-1674
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
t3142
Managed Object
3GPP Name
T3142
3GPP Reference
N/A
Description
The timer is used during packet access on CCCH and during packet
access while in dedicated mode. It is started after the receipt of an
IMMEDIATE ASSIGNMENT REJECT or a DTM REJECT message.
Its value is given by the network in the IMMEDIATE ASSIGNMENT
REJECT or DTM REJECT message.
The mobile station is not allowed to make a new attempt for packet
access in the same cell until T3142 expires, but may attempt packet
access in an other cell after successful cell reselection for radio
conditions reasons (see 3GPP TS 45.008). The value of the wait
indication (i.e. T3142) relates to the cell from which it was received.
The mobile station may initiate RR connection establishment in the
same cell before T3142 has expired.
Instance
Cell
Related FG
ZGB-03-05-007 One Phase Access

ZGB-03-05-008 Two Phase Access
0..255
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the network RACH resource is not enough, it is recommended to
The default value is set according to the general network traffic load.
Reason
Change take effect
No
2-1675
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.33.27 T3172
Full Name
T3172
Abbreviated Name
t3172
Managed Object
3GPP Name
T3172
3GPP Reference
N/A
Description
This parameter is used at the MS side. It is notified to the MS

through WAIT_INDICATION carried in the PACKET ACCESS
REJECT message.
This timer starts if the MS receives "PACKET ACCESS REJECT"
message
during packet access. The MS disables packet access if this timer
is timeout. The MS changes to idle status if this timer is timeout
prior to receiving assignment message. After this timer timeout, the
MS does not disable packet access in this cell, but shall not take
channel request as paging response except the MS receives paging
request
message.
Instance
Cell
Related FG
N/A
0..255
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
2-1676
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the network PRACH resource is not enough, it is recommended to
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.28 Max times of packet assignment resend

Full Name
Max times of packet assignment resend
Abbreviated Name
psAssReSendMax
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the number of times of resending assignment messages

exceeds the maximum number of times of resending packet
assignment messages specified at background, the TBF Release
message is resent to notify MS to release TBF.
During the service process, if CTRL_ACK is lost, then judge the
assignment type that MAC is waiting for. If the assignment type is
consistent with that MAC is waiting for, then the number of resending
assignment messages increments and the uplink/downlink
assignment message is resent. If it exceeds the maximum
2-1677
SJ-20140527134815-013|2015-03-10(R1.1)
number of resending assignment messages but the assignment

acknowledgement message from MS is still not received, then the
TBF Release message is issued from network and TBF is released.
If the assignment type is inconsistent with that MAC is waiting for,
then the assignment timer is cleared and the assignment message
will not be resent.
This parameter is supported from version 6.20.21.
Instance
Cell
Related FG
N/A
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this function is enabled, in the case of assignment message lost,
retransmission is initiated to solve the service anomaly problem

caused by the message lost in poor wireless environment.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1678
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.29 Enable no data during extended uplink TBF mode

Full Name
Enable no data during extended uplink TBF mode
Abbreviated Name
enExUpDynSupport
Managed Object
3GPP Name
EXT_UTBF_NO_DATA
3GPP Reference
N/A
Description
This parameter indicates whether the mobile station during extended

uplink TBF mode may refrain from sending PACKET UPLINK
DUMMY CONTROL BLOCK messages when there is no other
RLC/MAC block ready to send in an uplink radio block allocated
by the network.
0 The mobile station shall send a PACKET UPLINK DUMMY
CONTROL BLOCK message when there is no other RLC/MAC
block ready to send in an uplink radio block allocated by the network.
1 The mobile station may refrain from sending a PACKET UPLINK
DUMMY CONTROL BLOCK message when there is no other
RLC/MAC block ready to send in an uplink radio block allocated
by the network.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
EXT_UTBF
To enable this function, EXT_UTBF must be enabled at the same
Parameters
time.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Provided that the extended uplink TBF function is enabled, to reduce
MS power consumption in extended status, it is recommended to

enable this function.
2-1679
SJ-20140527134815-013|2015-03-10(R1.1)
At present, few MSs support this function. You can set the parameter
Reason
value according to network conditions.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.30 Initial Coding Scheme of GPRS uplink TBF

Full Name
Initial Coding Scheme of GPRS uplink TBF
Abbreviated Name
gprsCodecInitUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the coding scheme used by the initial

assignment when the MS perfoms access at the uplink to implement
GPRS services.
Instance
Cell
Related FG
ZGB-03-05-002 Initial Coding Scheme per Cell Settable
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1680
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Set the value according to network wireless conditions. Decrease
the value if the wireless quality is poor. Increase the value is the
wireless quality is good.
An intermediate value is taken as the default value according to
Reason
network conditions.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.31 Initial Coding Scheme of GPRS downlink TBF

Full Name
Initial Coding Scheme of GPRS downlink TBF
Abbreviated Name
gprsCodecInitDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the coding scheme used by the initial

assignment when the MS perfoms access at the downlink to
implement GPRS services.
Instance
Cell
Related FG
0: CS1
1: CS2
2: CS3
3: CS4
2-1681
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
the value if the wireless quality is poor. Increase the value if the
The middle value is used based on the network conditions.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.32 Maximum coding scheme of GPRS uplink TBF

Full Name
Maximum coding scheme of GPRS uplink TBF
Abbreviated Name
gprsCodecMaxUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum coding scheme supported

by the uplink TBF when the MS performs GPRS services.
2-1682
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
ZGB-03-05-001 Coding Scheme CS1~CS4
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The maximum value is used based on the network conditions.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.33 Maximum coding scheme of GPRS downlink TBF

Full Name
Maximum coding scheme of GPRS downlink TBF
Abbreviated Name
gprsCodecMaxDl
Managed Object
2-1683
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum coding scheme supported

by the downlink TBF when the MS performs GPRS services.
Instance
Cell
Related FG
ZGB-03-05-001 Coding Scheme CS1~CS4
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The maximum value is used based on the network conditions.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1684
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.34 PS preemption support

Full Name
PS preemption support
Abbreviated Name
psPreemptionInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When PFC is supported, iBSC allocates radio resources according

to user's subscribed QoS parameter.
When the user's subscribed QoS parameter can't be satisfied
and the user's QoS parameter allows preemption, if this switch is
enabled, the user can preempt the radio resource with low priority.
Instance
Cell
Related FG

0: Off
1: On
Unit
N/A
Default Value
Related Parameters
PFCSupport
It is required that the PFC function is enabled and this parameter
Parameters
takes effect.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
When the switch is turned on, the user can preempt wireless
resources of low priority services. This function needs to be

supported by the PFC function. Set the parameter value according
to on-site requirements.
Reason
Change take effect
No
2-1685
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.33.35 PS queuing support

Full Name
PS queuing support
Abbreviated Name
psQueueInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
If PFC is suppoted, iBSC allocates radio resource according to

signature QoS parameters from user side. When QoS guarantee
rate for user signature is unsatisfied (including through grabbing),
and the QoS parameter allows queuing, and if this parameter is
enabled, iBSC allocates radio resource to user according to Best
Effort, and insert the user into the queue, to wait for allocation of
radio resource. Queuing time can be gotten through PFC process;
otherwise if this parameter is disabled, access to this service is
directly refused.
When this parameter is Yes, you can configure PsMaxQueueInstNum.
Instance
Cell
Related FG

0: Off
1: On
Unit
N/A
Default Value
2-1686
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
PFCSupport
PsMaxQueueInstNum
It is required that the PFC function is enabled and this parameter
Parameters
takes effect.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
When the switch is turned on, the iBSC allocates wireless resources
to the user based on Best Effort, and inserts the user into a queue
to wait for wireless resource allocation. This function needs to be
supported by the PFC function. It is recommended to disable this
function.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.36 Resource adjust threshold

Full Name
Resource adjust threshold
Abbreviated Name
resourceAdjustThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1687
SJ-20140527134815-013|2015-03-10(R1.1)
Description
During PS services, the resource adjustment is judged in the

following two cases. : 1, The Ranps instance will perform handshake
with the Mac instance, with a period of 5 s. The user plane judges
the resource adjustment when it receives handshake requirement
from Ranps. 2, When the downlink is established on the uplink
TBF or the uplink is established on the downlink TBF, judge the
resource adjustment. The packet resource adjustment threshold is
used for the algorithm to judge packet resources adjusted from a
single timeslot to multi-timeslot.
The judgement principle is as follows:
When the uplink and downlink traffic is lower than the packet
resource adjustment threshold, the adjustment is not performed.
When the uplink traffic is greater than the downlink traffic, adjust
the uplink preferentially.
When the uplink traffic is lower than the downlink traffic, and the
downlink traffic - the uplink traffic < packet resource adjustment
threshold/4, adjust the uplink preferentially.
In other cases, adjust the downlink preferentially.
Instance
BSC
Related FG
ZGO-01-02-009 Traffic Based PDCH Expansion

ZGO-04-02-015 Intelligent UL/DL timeslot adjustment
200..50000
Unit
BYTE
Default Value
2000
Related Parameters
IPResrcAdjuThs
ResourceAdjustThs>=IPResrcAdjuThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is large, the total of uplink and downlink traffic
can hardly reach the resource adjustment threshold and adjustment

is difficult. After the total of uplink and downlink traffic reaches the
resource adjustment threshold, it is difficult for downlink traffic uplink traffic to reach packet resource adjustment threshold/4.
Therefore, uplink is preferred in the adjustment. This parameter can
be changed to adjust the initiation rate and preference of resource
adjustment.
2-1688
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
radio conditions.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.33.37 GDpiAppSrv DN
Full Name
GDpiAppSrv DN
Abbreviated Name
refGDpiAppSrvProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DPI application scenario to which the

cell belong, including the ordinary and business scenarios. It can
also be defined by the busy and idle periods.
Instance
Related FG
Cell
ZGO-01-02-012 Deep Packet Inspection in BSC
ZGO-01-02-013 Application Aware QoS Control Based on DPI
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
2-1689
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.33.38 Downlink TBF pre-establish support

Full Name
Downlink TBF pre-establish support
Abbreviated Name
EarlyDlTBFEstSupp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the cell supports the

pre-establishment of downlink TBF.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
2-1690
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function normally is disabled, and is enabled if specially
required (for example, to reduce the first packet delay).
This function is not a basic function, and is disabled by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.33.39 PS channel alloc reduction support

Full Name
PS channel alloc reduction support
Abbreviated Name
SuppReducePd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the cell supports reducing the

number of PDTCHs in use based on the PDTCH load.
Instance
Cell
Related FG
ZGO-03-02-015 Load Based PS Channel Limitation
0: Not Support
1: Support
2-1691
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
When the cell traffic is busy, to admit more MSs and lower the TBF
link establishment failure rate, this function can be enabled.
This function is not a basic function, and is disabled by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.33.40 Initial limit threshold of PDTCH alloc

Full Name
Initial limit threshold of PDTCH alloc
Abbreviated Name
LmtThreshold_0
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1692
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is the initial limit on the number of PDTCHs. When

the channel load meets the condition:
initial limit<= channel load < medium limit, one channel can be
reduced.
Instance
Cell
Related FG
65..74
Unit
Default Value
70
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is smaller, the initial limit on channel allocation
is enabled earlier. If the parameter value is larger, the initial limit on

channel allocation is enabled later.
The default value means that the initial limit on channel allocation is
Reason
enabled when the traffic reaches a certain volume.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.33.41 Medium limit threshold of PDTCH alloc

Full Name
Medium limit threshold of PDTCH alloc
Abbreviated Name
LmtThreshold_1
2-1693
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the medium limit on the number of PDTCHs.

When the channel load meets the condition:
medium limit<= channel load < maximum limit, two channels can
be reduced.
Instance
Cell
Related FG
75..84
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is smaller, the medium limit on channel
allocation is enabled earlier. If the parameter value is larger, the

medium limit on channel allocation is enabled later.
The default value means that the medium limit on channel allocation
Reason
is enabled when the traffic reaches a higher volume.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2-1694
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.42 Maximum limit threshold of PDTCH alloc

Full Name
Maximum limit threshold of PDTCH alloc
Abbreviated Name
LmtThreshold_2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the maximum limit on the number of PDTCHs.

When the channel load is greater this limit, four channels can be
reduced.
Instance
Cell
Related FG
85..94
Unit
Default Value
90
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is smaller, the maximum limit on channel
allocation is enabled earlier. If the parameter value is larger, the

maximum limit on channel allocation is enabled later.
The default value means that the maximum limit on channel
Reason
allocation is enabled when the traffic reaches a very high volume.
Change take effect
No
Access
Read/Write
OMC Access path

2-1695
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.100/V6.30.100
N/A
2.33.43 Damping of PDTCH alloc from limit to non-limit

Full Name
Damping of PDTCH alloc from limit to non-limit
Abbreviated Name
LmtThreshold_3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used to avoid frequent changes between limited

channel allocation and unlimited channel allocation.
Instance
Cell
Related FG
0..15
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is small, the probability of the service
switching between limited channel allocation and unlimited channel

allocation is large. If the parameter value is large, the probability
of the service switching between limited channel allocation and
unlimited channel allocation is small but the service senses channel
load changes slowly.
The default value reduces frequent switches between limited
Reason
channel allocation and unlimited channel allocation.
Change take effect
No
2-1696
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.44 GPRS phones init. Code can be changed

Full Name
GPRS phones init. Code can be changed
Abbreviated Name
initAttachExchGprs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the coding mode used by the

GPRS MS in a cell can be dynamically changed.
0: the coding ,mode cannot be dynamically changed.
1: the coding mode can be dynamically changed.
Instance
Cell
Related FG
ZGB-03-05-012 GPRS Link Adaptation
1: Yes
0: No
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1697
SJ-20140527134815-013|2015-03-10(R1.1)
The recommended value is "Yes", which will improves the data
throughput.
The default value is set to improve the data throughput.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.33.45 C/I
Full Name
C/I
Abbreviated Name
sc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The BSC uses MEAN_BEP (equivalent to C/I) to indicates radio

transmission quality, which is the basis of blocks adjustment.
MEAN_BEP is defined with seven levels, and each level
corresponds with a weight. This weight is added to the weight
converted from the UMTS QoS parameter described above, and is
used as the basis of shared-blocks allocation.
The weights corresponding to the MEAN_BEP levels are listed as
follows:
MEAN_BEP Level MEAN_BEP Value Weight
0 0-4 -3 x Sc
1 5-9 -2 x Sc
2 10-13 -SC
3 14-17 0
4 18-21 -SC
5 22-26 2 x Sc
2-1698
SJ-20140527134815-013|2015-03-10(R1.1)
6 27-31 3 x Sc
Instance
Cell
Related FG
ZGO-01-02-002 C/I based Packet Scheduling
0..8
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
For high-interference users, the resource allocation granularity
should not be limited; otherwise, the data rate may be too low
because less radio resources are allocated.
Different PDTCH resource granularities are allocated for non-GBR
users but not based on MEAN_BEP, which helps increase the user
throughput in poor radio conditions.
This parameter, together with Sa and St, is used for QoS weight
Reason
calculation. When this parameter is set to 2, the scheduling

algorithm affects less to the weight.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.46 ARP
Full Name
ARP
2-1699
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
sa
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The weights of shared-blocks are fine tuned based on the ARP

(priority level) parameter.
The weights corresponding to the ARP levels are listed as follows:
ARP Allocated Weight
1 2 x Sa
2 Sa
30
Instance
Cell
Related FG
ZGO-01-02-001 Support ARP in Packet Scheduling
0..8
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter affects the parameter adjusting QoS weight for radio
blocks allocation. The larger the value is, the more obviously the
QoS weight is adjusted. For high-priority users, a certain weight
should be set to ensure that more granularities are allocated for
better service.
This parameter, together with Sc and St, is used for QoS weight
Reason

Change take effect
No
Access
Read/Write
2-1700
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.47 THP
Full Name
THP
Abbreviated Name
st
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The weights of shared-blocks are fine tuned based on the THP

parameter of interactive service.
The weights corresponding to the THP are listed as follows:
THP Allocated Weight
00
1 St
2 2 x St
3 3 x St
4 4 x St
5 5 x St
6 6 x St
7 7 x St
8 8 x St
Instance
Cell
Related FG
0..8
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1701
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
Yes
This parameter affects the parameter adjusting QoS weight for radio
blocks allocation. The larger the value is, the more obviously the
QoS weight is adjusted, but the QoS parameters configured in the
core network should also be considered, so the default value is
recommended.
This parameter, together with Sa and Sc, is used for QoS weight
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.48 Maximal resource for POC service

Full Name
Maximal resource for POC service
Abbreviated Name
POCSrcThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1702
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Push to Talk over Cellular (PoC) is a mobile network based

push-to-talk service that uses the VoIP technology.
The PoC defines a half duplex VoIP system for mobile devices,
which takes advantages of packet switching functions in the radio
data network.
The PoC feature has the following impacts on the traditional PS
channel allocation strategy:
1. If a PS channel is allocated to one or more PoC users, this
channel cannot be allocated to any other common PS user until all
PoC users are released.
2. A channel already allocated to one or more PoC users is
preferred for new PoC users until this channel is congested.
This parameter indicates the maximum proportion of channels that
can be allocated to PoC services in percentage among all current
available channels for PS services (including static PDCHs and
dynamic PDCHs not occupied by CS services).
Instance
Cell
Related FG
N/A
0..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When both common services and PoC services exist, the larger
the parameter is, the more sufficient resources are available for
PoC services but the fewer the available resources are for common
services. The smaller the parameter is, the more resources are
available to ensure common services.
This default value is set to ensure that sufficient resources are
Reason
available for common services.
Change take effect
No
0
2-1703
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.49 Gprs Initial access rate

Full Name
Gprs Initial access rate
Abbreviated Name
GprsIniAccRate
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a bandwidth use for initial access and

admission when the GPRS channel is activated.
Instance
Cell
Related FG
ZGO-03-01-002 Transmission Based CAC
1..22
Unit
kb/s
Default Value
22
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher the initial access bandwidth, the higher the initial access
rate. This parameter is set based on the wireless network quality

and bandwidth.
The default value is set based on the bandwidth of CS4 at normal
Reason
rate.
Change take effect
2-1704
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.33.50 Downlink Delay Signal TBF Time

Full Name
Downlink Delay Signal TBF Time
Abbreviated Name
DlSigDelayTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
In some cases, the data carried by a TBF only contains one or two
useful packets. Most of such TBFs are signaling TBFs for routing
area update or cell update. Generally, each MS supports extended
uplink TBF. The downlink TBF release is delayed for a time period
after all useful packets are transferred. During this period, large
amounts of uplink and downlink acknowledgement messages are
transferred, consuming lots of block resources. No uplink TBF can
be established on the downlink TBF, and no downlink TBF can be
established on the uplink TBF. This parameter is used to control
the delay time of downlink signaling TBFs after all downlink data
is transferred.
Instance
Cell
Related FG
ZGB-03-05-013 Delayed TBF Release in DL
0..4000
Unit
ms
Default Value
2000
Related Parameters
N/A
N/A
Parameters
2-1705
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. Modifying the parameter value
has an impact on the service quality.
The delay time of downlink data TBFs is the same as that specified
Reason
by the previous parameter "Downlink Delay TBF Time".
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.51 Extended uplink Signal TBF time

Full Name
Extended uplink Signal TBF time
Abbreviated Name
ExtUlSigTBFTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
In some cases, the data carried by a TBF only contains one or two
useful packets. Most of such TBFs are signaling TBFs for routing
area update or cell update. Generally, each MS supports extended
uplink TBF. The downlink TBF release is delayed for a time period
after all useful packets are transferred. During this period, large
amounts of uplink and downlink acknowledgement messages are
transferred, consuming lots of block resources. No uplink TBF can
be established on the downlink TBF, and no downlink TBF can be
established on the uplink TBF. This parameter is used to control the
active period of uplink extended signaling TBFs.
2-1706
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..3000
Unit
ms
Default Value
1500
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. Modifying the parameter value
has an impact on the service quality.
The active period of uplink extended data TBFs is the same as that
Reason
specified by the previous parameter "Extended Uplink Timer".
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.52 Support splitting uplink tcp ack datagram

Full Name
Support splitting uplink tcp ack datagram
Abbreviated Name
SuppTcpAckSplit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1707
SJ-20140527134815-013|2015-03-10(R1.1)
Description
The TCP is a transport protocol designed for fixed hosts and

networks. When applied in a wireless mobile environment, the TCP
limits the throughput due to the mobile network's characteristics
different from those of the fixed network, such as high packet
loss rate, long RTT, and disorder. The BSC must adapt to the
characteristics of fixed networks and participate in TCP semantics
interaction to increase the data throughput per TCP connection.
When the BSC detects that a TCP congestion avoidance procedure
is initiated, it splits the uplink ACK packet into multiple packets and
sends these packets to the server. The packet splitting speeds up
the increase of the TCP window at the server end and improves the
TCP performance.
Instance
Cell
Related FG
ZGO-01-02-011 Intelligent TCP Trafic Manegment
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-1708
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.33.53 Support copying uplink tcp ack datagram

Full Name
Support copying uplink tcp ack datagram
Abbreviated Name
SuppTcpAckCopy
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
After receiving a TCP ACK packet from an MS, the BSC immediately
duplicates the TCP ACK packet and sends three copies to the server
when detecting TCP packet loss in accordance with the packet
sequence number. In this way, a retransmission procedure can be
quickly triggered on the server to improve the TCP performance.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
0
2-1709
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.54 Support discarding duplicate uplink tcp ack datagram

Full Name
Support discarding duplicate uplink tcp ack datagram
Abbreviated Name
SuppDupTcpAckDisc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When TCP packet disorder occurs but no packet is lost, and an MS

sends the same ACK packet to the server for three consecutive
times, the server enters the congestion avoidance state after
receiving these three ACK packets. The BSC can monitor TCP
packets. If no packet loss occurs, the BSC discards the repeated
ACK packets to prevent the server from entering the congestion
avoidance state.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1710
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.55 TrxPSBusyThs
Full Name
TrxPSBusyThs
Abbreviated Name
TrxPSBusyThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The method for calculating the percentage of idle resources for PS

services in a TRX:
Suppose that channels for PS services are available in both uplink
and downlink of the TRX. The number of uplink available channels
is represented by byUpNum, and the number of downlink available
channels is represented by byDwNum.
The sum of idle resources on all available uplink PS
channels=100(Abis/AbisMax)(Qos/16)((UsermaxUsernum)/Usermax),
which means the sum of idle resources on byUpNum uplink
channels.
The sum of idle resources on all available downlink PS
channels=100(Abis/AbisMax)(Qos/16)((UsermaxUsernum)/Usermax),
2-1711
SJ-20140527134815-013|2015-03-10(R1.1)
which means the sum of idle resources on byDwNum downlink

channels.
Where,
Abis indicates the amount of Abis resources (IP Abis bandwidth or
E1 Abis timeslots) allocated to a channel.
AbisMax indicates the maximum allowable number of Abis
resources (IP Abis bandwidth or E1 Abis timeslots) allocated to a
channel. For example, a maximum of four E1 Abis timeslots can be
allocated to a PS channel of an EDGE TRX.
Qos indicates the available Qos quota on a channel. The initial
available quota of a channel is 16.
Usermax indicates the maximum allowable users that can be
multiplexed on a channel.
Usernum indicates the number of existing users on the current
channel.
The percentage of idle resources in the TRX (TrxIdle) (ranging from
0 to 100) is:
If byUpNum == 0 and byDwNum != 0, TrxIdle = the sum of idle
resources on all available downlink PS channels/byDwNum.
If byUpNum != 0 and byDwNum == 0, TrxIdle = the sum of idle
resources on all available uplink PS channels/byUpNum.
If byUpNum != 0 and byDwNum != 0, TrxIdle = (the sum of idle
resources on all available downlink PS channelsbyDwNum
+ the sum of idle resources on all available uplink PS
channelsbyUpNum)/(2byDwNumbyUpNum).
If byUpNum == 0 and byDwNum == 0, TrxIdle = 0 because there is
no available PS channel in the TRX.
The following describes the TRX selection principle that only
considers the percentage of idle resources for PS services:
1. If idle resources are available for PS services in all TRXs, the
BSC randomly selects a TRX for channel allocation. Before the
percentage of idle resources for PS services in the TRX becomes
greater than the threshold, the same TRX is preferred for channel
allocation, which follows the centralized channel allocation principle
for PS services.
2. If the percentage of idle resources for PS services in the assigned
TRX is lower than the threshold, it is deemed that the PS traffic in
the TRX is too high and load balancing between TRXs is required.
Another TRX with idle resources is selected to allocate channels to
PS services until the PS traffic in this TRX becomes too high.
3. When the PS traffic in all TRXs is too high, the TRX with the
highest percentage of idle resources for PS services is selected to
achieve load balancing among TRXs.
Instance
Cell
2-1712
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
ZGO-03-02-003 Enhancement on PS Channel Allocation
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be adjusted to a smaller value to allow quick
selection of new TRXs for PS channel allocation when sufficient

channel resources are available for PS services and the requirement
for PS service rate is high. Or else, this parameter is adjusted to
a larger value.
The default value is set to 80% to ensure the rate performance and
Reason
user experience.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.56 Cn
Full Name
Cn
Abbreviated Name
Cn
Managed Object
2-1713
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a statistical value that determines an

increase of the coding scheme level.
Unlike circuit channels, which use a unified coding scheme, GPRS
data blocks can use different coding schemes, including CS1,
CS2, CS3, and CS4. The data rates corresponding to these four
coding schemes are 9.05 kbps, 13.4 kbps, 15.6 kbps, and 21.4
kbps respectively. A low level coding scheme provides a high error
correction capability but supports a low data throughput. A specific
coding scheme can be selected for each timeslot or even each TBF.
To achieve the maximum throughput during a GPRS data
transmission procedure, the network must select coding schemes
dynamically according to the data rate requirement and radio
transmission quality. In case of good radio transmission quality,
which means a small probability of error-caused radio block
retransmission, a high level coding scheme can be selected to
allow a larger amount of information. During a TBF (uplink or
downlink) using CSn (1n3), if the number of correct blocks
reaches Cn[n-1]% of Nn[n-1] consecutive data blocks, the coding
scheme level will be increased, meaning the one level higher coding
scheme will be used.
The subscripts 1, 2, and 3 in the parameter names on the GUI
indicate the corresponding parameters for coding scheme change
between CS1 and CS2, between CS2 and CS3, and between CS3
and CS4.
Instance
Cell
Related FG
0..100
Unit
Default Value
[85,85,85]
Related Parameters
N/A
N/A
Parameters
Value Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1714
SJ-20140527134815-013|2015-03-10(R1.1)
Adjusting the parameter to a larger value makes coding scheme
change to a higher level more difficult. A large value ensures proper

use of the higher level coding scheme, prevents data rate decrease
due to improper coding scheme, and reduces the GPRS TBF drop
rate.
Adjusting the parameter to a small value makes coding scheme
change to a higher level easier.
A large value is recommended to ensure that change to a higher
level coding scheme is only allowed when the BLER is low. This
helps improving the GPRS throughput (non-EDGE).
The system simulation result shows that a BLER from 15% to 25%
Reason
is acceptable. A higher level coding scheme used when the BLER is

lower than 15% has a positive impact on the data rate.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.57 Nn
Full Name
Nn
Abbreviated Name
Nn
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1715
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is a statistical value that determines a decrease of

the coding scheme level. It is a parameter used on the RLC/MAC
layer of the BRP.
correction capability but supports a low data throughput.
A specific coding scheme can be selected for each timeslot or
even each TBF. To achieve the maximum throughput during a
GPRS data transmission procedure, the network must select coding
schemes dynamically according to the data rate requirement and
radio transmission quality.
In case of poor radio transmission quality, a lower level coding
scheme must be used to provide a higher immunity from
interference. During a TBF (uplink or downlink) using the CSn
(2n4), if the number of consecutive lost blocks reaches Xn[n-2]%
of Nn[n-2] data blocks, the coding scheme level will be decreased,
meaning a one level lower coding scheme will be used.
The subscripts 1, 2, and 3 in the GUI names of this parameter
and CS4.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
[20,20,20]
Related Parameters
N/A
N/A
Parameters
Value Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1716
SJ-20140527134815-013|2015-03-10(R1.1)
If the parameter is adjusted to a larger value, more transmitted data
blocks are considered to ensure the system stability during coding

scheme change.
If the parameter is adjusted to a smaller value, the coding scheme
can be immediately adjusted in case of sudden change of radio
conditions.
An appropriate parameter value helps improving the GPRS
throughput (non-EDGE).
The default value (20) is an appropriate value that ensures flexible
Reason
and accurate rate adjustment.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.58 Xn
Full Name
Xn
Abbreviated Name
Xn
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1717
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is the threshold that is used to determine a decrease

of the coding scheme level. It is a parameter used on the RLC/MAC
layer of the BRP.
correction capability but supports a low data throughput.
A specific coding scheme can be selected for each timeslot or
even each TBF. To achieve the maximum throughput during a
GPRS data transmission procedure, the network must select coding
schemes dynamically according to the data rate requirement and
radio transmission quality.
In case of poor radio transmission quality, a lower level coding
scheme must be used to provide a higher immunity from
interference. During a TBF (uplink or downlink) using the CSn
(2n4), if the number of consecutive lost blocks reaches Xn[n-2]%
of Nn[n-2] data blocks, the coding scheme level will be decreased,
meaning a one level lower coding scheme will be used.
The subscripts 1, 2, and 3 in the GUI names of this parameter
and CS4.
Instance
Cell
Related FG
0..100
Unit
Default Value
[25,25,25]
Related Parameters
N/A
N/A
Parameters
Value Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1718
SJ-20140527134815-013|2015-03-10(R1.1)
Adjusting the parameter to a larger value makes coding scheme
change to a lower level difficult.

Adjusting the parameter to a smaller value makes coding scheme
change to a lower level easier.
A small value is recommended to ensure that change to a lower
level coding scheme can be triggered immediately to prevent
too low data rate when the BLER reaches a certain value. This
helps reducing the GPRS TBF drop rate and improving the GPRS
throughput (non-EDGE).
This default value is set according to the acceptable retransmission
Reason
rate 15% to 25% in a common radio environment.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.59 Sending PSI13 or not

Full Name
Sending PSI13 or not
Abbreviated Name
PSI13SendInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the system sends PSI13

messages over the PACCH channel. 0 means not to send and 1
for to send the messages.
Instance
Cell
Related FG
N/A
0: not send
1: send
2-1719
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Not available.
Keep it the same as that in versions prior to the upgrade.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.60 Indicate Uplink and Downlink RLC Window Size value

Full Name
Indicate Uplink and Downlink RLC Window Size value
Abbreviated Name
RLCMaxWinInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1720
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the window size value of uplink EGPRS

RLC data that the system notifies the MS to send, and the window
size values when the system sends downlink EGPRS RLC data and
receive uplink EGPRS RLC data.
Instance
Cell
Related FG
N/A
0: average
1: Maximum
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
1 is recommended to improve throughput at the RLC layer.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.61 Packet Neighbour Cell Data message sending times

indication
Full Name
Packet Neighbour Cell Data message sending times indication

2-1721
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
PNCDSendInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of times that the system sends
the "packet neighbour cell information" messages to the MS during
cell reselection over network. If the value is 1, the message format
is 11223344.
Instance
Cell
Related FG
N/A
0: once
1: twice
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
1 is recommended to raise the probability of MS receiving the packet
neighbour cell information.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-1722
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.62 One phase access initial code selection

Full Name
One phase access initial code selection
Abbreviated Name
OnePhaAccIniCodSet
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for one-phase access initial

code selection: by configuration or by signal level.
Instance
Cell
Related FG
0: no, meaning that only fixed value 0x2B can be filled

1: yes, meaning that random values can be filled
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It can be set as "Coding selection by level" so that the coding mode
and rate can be selected on the basis of the level measured in the
network, to improve the initial service rate.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1723
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.101/V6.30.101
N/A
2.33.63 Two phase access initial code selection

Full Name
Two phase access initial code selection
Abbreviated Name
TwoPhaAccIniCodSet
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for two-phase access initial

code selection: by configuration or by signal level.
Instance
Cell
Related FG
0: by configuration
1: by signal level
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It can be set as "Coding selection by level" so that the coding mode
and rate can be selected on the basis of the level measured in the
network, to improve the initial service rate.
Reason
Change take effect
No
2-1724
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.64 Initial GPRS code scheme at one phase access

Full Name
Initial GPRS code scheme at one phase access
Abbreviated Name
OnePhaAccIniGCodSch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the value of "OnePhaAccIniCodSet" is 0, this parameter

determines the GPRS initial code scheme.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
Related Parameters
OnePhaAccIniCodSet
If OnePhaAccIniCodSet is 0, set the initial coding according to this
Parameters
parameter.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This function affects all MSs in the cell. Its value can be raised a bit
if only the link setup success rate can be guaranteed.
Reason
Change take effect
2-1725
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.65 support downlink five timeslots

Full Name
support downlink five timeslots
Abbreviated Name
SuppDlFiveTs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a cell allocates five timeslots for

MSs in the downlink direction.
Instance
Cell
Related FG
ZGO-03-05-008 Enhanced Multi-timeslot Support
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Not available.
2-1726
SJ-20140527134815-013|2015-03-10(R1.1)
By default, the original version supports the function of allocating
Reason
downlink five timeslots for MSs. The switch is On by default, which

is the same as that in the original version.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.66 Optimize pending block in downlink transfer state

Full Name
Optimize pending block in downlink transfer state
Abbreviated Name
TransPendingOpt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to decrease the times of

sending pending blocks in downlink transfer state.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1727
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
Yes
If the switch is turned Off, the wireless blocks are many for the
transmission downlink pending blocks and it's good for the setup of
uplink TBF, but the downlink throughput can be decreased. For
networks where the pending blocks account for a big proportion, this
switch can be turned On to improve the downlink throughput, but
in this case, the delay for setting up the uplink TBF can possibly
be prolonged.
This parameter is an optimized function that is disabled by default. It
Reason
is not to implicitly change the behavior of original versions.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.67 Optimize dummy block in downlink delay state

Full Name
Optimize dummy block in downlink delay state
Abbreviated Name
DlDummySendOpt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to decrease the times of

sending dummy blocks in downlink delay state.
Instance
Cell
Related FG
N/A
0: No
1: Yes
2-1728
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the switch is turned Off, the wireless blocks are many for the
transmission downlink dummy blocks and it's good for the setup of
uplink TBF, but the downlink throughput can be decreased. This
switch can be turned On to improve the downlink throughput, but
in this case, the delay for setting up the uplink TBF can possibly
be prolonged.
This parameter is an optimized function that is disabled by default. It
Reason
is not to implicitly change the behavior of original versions.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.68 Times of interval that send downlink dummy block

Full Name
Times of interval that send downlink dummy block
Abbreviated Name
DlDummySendIntTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1729
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies a multiplier added to the existing interval of

sending dummy blocks in downlink delay state.
Instance
Cell
Related FG
N/A
1..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value can be raised if necessary.
Same as the behaviors in original versions by default
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.69 DTM MultiSlot Class 11 extended dynamic allocation

Full Name
DTM MultiSlot Class 11 extended dynamic allocation
Abbreviated Name
DTM11EDASup
Managed Object
2-1730
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
DTM multislot 11 MSs support the extended dynamic allocation

switch.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
DTMSupport
This parameter works if DTMSupport is set to Yes.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.33.70 support uplink tbf early establishment

Full Name
support uplink tbf early establishment
2-1731
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
SuppEarlyTBFEst
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to support

the uplink pre-established TBF function.
Instance
Cell
Related FG
ZGO-03-05-009 Early TBF Establishment
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is enabled when the uplink pre-established TBF is required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-1732
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.71 support DTM of sub channel 1 in VAMOS

Full Name
support DTM of sub channel 1 in VAMOS
Abbreviated Name
suppSub1DTM
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter controls whether the user on the VAMOS

sub-channel1 supports DTM.
Instance
Cell
Related FG

0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Whether to enable this function is determined by the onsite
requirement.
Reason
Change take effect
No
Access
Read/Write
2-1733
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.72 support TBF multiplexing of active TBF

Full Name
support TBF multiplexing of active TBF
Abbreviated Name
SuppActTBF
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables Active-TBF-based TBF

multiplexing.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled to improve channel utilization rate
and TBF multiplexing rate.
It is a special function switch, disabled by default.
Reason
Change take effect
No
0
2-1734
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.33.73 SPID based inter-RAT cell reselection priority

Full Name
SPID based inter-RAT cell reselection priority
Abbreviated Name
SPIDBasedPriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports SPID-based

inter-RAT cell reselection priorities.
Instance
Cell
Related FG
ZGO-02-03-015 Subscriber Profile ID(SPID)
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1735
SJ-20140527134815-013|2015-03-10(R1.1)
This feature is generally disabled. If this feature is disabled, the
MS performs inter-RAT cell reselection by using the public priority

configured and broadcasted by the BSC. If the SGSN supports SPID
delivery and each MS is desired to perform inter-RAT cell reselection
by using its own independent priority, this feature is enabled.
It is a feature switch. By default, it is disabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.74 T3230
Full Name
T3230
Abbreviated Name
T3230
Managed Object
3GPP Name
T3230
3GPP Reference
44.06
Description
This parameter indicates the valid duration of the independent

priority.
Instance
Cell
Related FG
ZGO-02-03-015 Subscriber Profile ID(SPID)
2-1736
SJ-20140527134815-013|2015-03-10(R1.1)
0..7
0: 5 minutes
1: 10 minutes
2: 20 minutes
3: 30 minutes
4: 60 minutes
5: 120 minutes
6: 180 minutes
7: reserved
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
After the independent priority is invalid, the public priority is used
instead. If the independent priority, instead of the public priority, is

desired to be used for inter-RAT cell reselection, this parameter is
increased.
This parameter is set to minimize the effect of the independent
Reason
priority.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.75 DPI Support

2-1737
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
DPI Support
Abbreviated Name
DPISUPPORT
Managed Object
3GPP Name
CONTROL_ACK_TYPE
3GPP Reference
N/A
Description
This parameter indicates whether the DPI function is supported. If

this parameter is set to 1, DPI is supported. If this parameter is
set to any other value, DPI is not supported. If the DPI function is
enabled, the BSS can directly identify the application type of data
services independent of the core network.
Instance
Cell
Related FG
ZGO-01-02-012 Deep Packet Inspection in BSC
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The default value is recommended. The DPI function can be
enabled based on the onsite situation.
Generally this function is disabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1738
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.201/V6.30.201
N/A
2.33.76 Highest coding scheme of signal TBF

Full Name
Highest coding scheme of signal TBF
Abbreviated Name
SigTBFMaxCode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter limits the highest coding scheme of signaling in

the case of upper-layer signaling transmission, for example, the
transmission of PDP activation and routing area update signaling.
Instance
BSC
Related FG
N/A
4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
10: MCS7
11: MCS8
12: MCS9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1739
SJ-20140527134815-013|2015-03-10(R1.1)
The configuration of this parameter should be based on signaling
TBF transmission stability and the quality of the wireless network

to guarantee that the signaling data can be transmitted stably on
the air interface. For networks that are sensitive to high coding
scheme ratio, you are recommended to set this parameter to MCS 7
to MCS 9.
The default value is determined for guaranteeing signaling
Reason
transmission.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.77 Two-phase access

Full Name
Two-phase access
Abbreviated Name
TwoPhaseAccess
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether two-phase access mode is forcibly

used when an MS establishes the uplink TBF on the CCCH.
Instance
BSC
Related FG
ZGB-03-05-008 Two phase access
0..1
Unit
N/A
Default Value
Related Parameters
N/A
2-1740
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set according to the establishment success rate
and whether radio resources are initially allocated based on the

actual multi-TS capability of the MS. If one-phase access mode is
used, the establishment success rate can be increased, but the
complete multi-TS capability of the MS cannot be obtained in time.
This parameter is set to obtain the MS radio capability as soon as
Reason
possible.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.78 optimize block schedule

Full Name
optimize block schedule
Abbreviated Name
BlockScheOpt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to optimize

the radio block scheduling algorithm.
Instance
BSC
Related FG
N/A
2-1741
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If downlink throughput ratio is required to be optimized, you can
enable this function based on the testing result.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.79 Indication of different reselection parameters in packet idle

mode and packet transfer mode
Full Name
Indication of different reselection parameters in packet idle mode

and packet transfer mode
Abbreviated Name
PSReselParam2
Managed Object
2-1742
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables parameter reselection in packet

idle mode and packet transfer mode.
Instance
Cell
Related FG
ZGO-02-02-013 different Cell Reselection Parameters for IDLE and

ACTIVE Status
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is enabled only when the reselection conditions in
transmission state are expected to be different than those in idle

state.
Disabled by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.33.80 GPRS Uplink Init. Coding Scheme in subcell2

2-1743
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
GPRS Uplink Init. Coding Scheme in subcell2
Abbreviated Name
UlInitGPRSInitAttSeltSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial GPRS uplink coding scheme

when the MS accesses subcell 2.
Instance
Cell
Related FG
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured based on different subcell access
requirements. To increase the establishment success rate in subcell

2 and decrease the call drop rate, you can set the initial and
maximum coding scheme in subcell 2 lower than those in subcell 1.
The default value of this parameter is consistent with that of
Reason
gprsCodecInitUl.
Change take effect
No
Access
Read/Write
OMC Access path

2-1744
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.201/V6.30.201
N/A
2.33.81 GPRS Downlink Init. Coding Scheme in subcell2

Full Name
GPRS Downlink Init. Coding Scheme in subcell2
Abbreviated Name
DlInitGPRSInitAttSeltSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum GPRS downlink coding

scheme when the MS accesses subcell 2.
Instance
Cell
Related FG
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
gprsCodecMaxDl.
Change take effect
2-1745
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.82 GPRS Uplink Max. Coding Scheme in subcell2

Full Name
GPRS Uplink Max. Coding Scheme in subcell2
Abbreviated Name
UlMaxGPRSInitAttSeltSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum GPRS uplink coding scheme

Instance
Cell
Related FG
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1746
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
gprsCodecMaxUl.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.83 GPRS Downlink Max. Coding Scheme in subcell2

Full Name
GPRS Downlink Max. Coding Scheme in subcell2
Abbreviated Name
DlMaxGPRSInitAttSeltSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial GPRS downlink coding scheme

Instance
Cell
Related FG
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Related Parameters
N/A
2-1747
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
gprsCodecInitDl.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.33.84 Rate control of large throughput service

Full Name
Rate control of large throughput service
Abbreviated Name
LargeTPRateCtrl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether rate control is enabled for large

throughput services. This switch is enabled if rate control is needed
when the throughput exceeds the threshold specified by the
parameter LargeTPEnhanceThrs.
Instance
Cell
2-1748
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
ZGO-01-02-015 PS Service Acceleration based on Traffic
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This switch is generally disabled. If the traffic reaches the specified
threshold and rate control is required to achieve the expected rate,

this switch is enabled.
This switch is disabled by default. The rate control feature is only
Reason
used in special areas and conditions.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.33.85 The large throughput traffic enhance threshold

Full Name
The large throughput traffic enhance threshold
Abbreviated Name
LargeTPEnhanceThrs
Managed Object
3GPP Name
N/A
2-1749
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the large throughput threshold

that determines whether the rate needs to be enhanced. If
LargeTPRateCtrl is set to 1 and the downlink throughput exceeds
this threshold, the adaptive rate adjustment is performed to achieve
the expected rate.
Instance
Cell
Related FG
500..500000
Unit
BYTES
Default Value
50000
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the parameter is, the stricter the large throughput
condition a service can meet. Generally, this parameter is set to a

value smaller than that required by the criteria of the operator so that
adaptive adjustment can be applied in advance.
This parameter must be larger than the value of ResrcAdjuThs. The
Reason
default value is set according to the test rule of China Mobile.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2-1750
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.86 Matched HTTP IP resource adjustment threshold

Full Name
Matched HTTP IP resource adjustment threshold
Abbreviated Name
IPResrcAdjuThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the resource adjustment threshold for

services of the server with the matched IP address when the HTTP
rate enhancement or partner service optimization is enabled.
Instance
Cell
Related FG
50..50000
Unit
BYTES
Default Value
200
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the value is, the more likely the resource adjustment
is initiated.
This parameter must be smaller than the value of ResrcAdjuThs so
Reason
that services with the matched IP address can be adjusted earlier

than those without the matched IP address.
Change take effect
No
Access
Read/Write
OMC Access path

2-1751
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.202/V6.30.202
ADD
2.33.87 Expected rate

Full Name
Expected rate
Abbreviated Name
ExptRate
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the expected stable rate during the rate
control.
Instance
Cell
Related FG
0..255
Unit
kbps
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the expected rate of
the operator. Generally, it is set to a value slightly larger than the

rate required by the test rule of the operator so that the rate after
adaptive adjustment is higher than the expected rate.
The default value is set according to the rate required by the test
Reason
rule of China Mobile.
Change take effect
No
2-1752
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.33.88 Adaptive rate adjustment amplifier step

Full Name
Adaptive rate adjustment amplifier step
Abbreviated Name
AdptRateAmplStep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the amplification step of scheduling factor

for increasing the rate to the expected value. The amplification
precision is 0.01. The factor amplification is calculated according to
the formula: factor step/100.
Instance
Cell
Related FG
100..1000
Unit
N/A
Default Value
200
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1753
SJ-20140527134815-013|2015-03-10(R1.1)
The adjustment step must be set according to the difference
between the actual rate and the expected rate. If the difference
is large, and it is expected to achieve the expected rate quickly,
a larger amplification factor can be set. If the difference is small,
and it is expected to achieve the expected rate slowly, a smaller
amplification factor can be set.
The adjustment step must be set according to the difference between
Reason
the actual rate and the expected rate, the service characteristics,
and the multiplexing degree. The default amplification factor is set to
2, which is an intermediate value to prevent ping-pong adjustment.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.33.89 Adaptive rate adjustment amplifier step

Full Name
Adaptive rate adjustment amplifier step
Abbreviated Name
AdptRateMinlStep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minification step of scheduling factor

for decreasing the rate to the expected value. The minification
precision is 0.01. The factor minification is calculated according to
the formula: factor step/100.
Instance
Cell
Related FG
1..100
Unit
N/A
2-1754
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The adjustment step must be set according to the difference
between the actual rate and the expected rate. If the difference
is large, and it is expected to achieve the expected rate quickly,
a smaller minification factor can be set. If the difference is small,
and it is expected to achieve the expected rate slowly, a greater
minification factor can be set.
The adjustment step must be set according to the difference between
Reason
the actual rate and the expected rate, the service characteristics,
and the multiplexing degree. The default minification factor is set to
0.8, which is an intermediate value to prevent ping-pong adjustment.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.33.90 Adaptive rate adjustment periodic execution schedule

Full Name
Adaptive rate adjustment periodic execution schedule
Abbreviated Name
AdptSched
Managed Object
3GPP Name
N/A
2-1755
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter determines the schedule for triggering adaptive rate

adjustment. If the parameter is set to 0, rate control is triggered
when the throughput meets the threshold. If the parameter is set to
1, rate control is triggered when the timer AdptSchedTime expires.
Instance
Cell
Related FG
0: Throughput
1: Periodic
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If rate control is scheduled by throughput, the higher the rate is, the
more frequently the rate is adjusted. If rate control is scheduled

by period, the rate is adjusted periodically. This parameter can be
set as needed.
The default value is set to 0 so that the rate control for large
Reason
throughput services is scheduled by throughput.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2-1756
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.91 Adaptive rate adjustment period

Full Name
Adaptive rate adjustment period
Abbreviated Name
AdptSchedTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the adaptive rate adjustment period. It

is effective only when AdptSched is set to 1. After the adaptive
rate adjustment is triggered by threshold crossing throughput, the
rate is adjusted periodically according to this period. At expiry of
this timer, rate adjustment is performed no matter whether the
throughput exceeds the threshold, unless the number of adjustment
times reaches the maximum number of adjustment times or the
rate reaches the expected value.
Instance
Cell
Related FG
0..255
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter must be configured to an intermediate value
according to the average TBF alive time. If the value is too small,
the rate is adjusted too frequently. If the value is too large, the
expected rate cannot be obtained due to insufficient adjustment.
The default value prevents too frequent rate adjustment in a TBF
Reason
alive period.
Change take effect
No
2-1757
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.33.92 Adaptive start rate

Full Name
Adaptive start rate
Abbreviated Name
AdptStartRate
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the rate threshold that determines

whether rate enhancement is triggered. If the traffic reaches the
corresponding threshold and the service rate is lower than this
threshold, rate adjustment is triggered to enhance the service
rate. AdptStartRate must be smaller than the difference between
ExptRate and AdptAllowRateUpDown.
Instance
Cell
Related FG
0..255
Unit
kbps
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1758
SJ-20140527134815-013|2015-03-10(R1.1)
The parameter is lower than the difference between ExptRate and
AdptAllowRateUpDown. The rate between this threshold and the

difference is not adjusted. The lower the threshold (AdptStartRate)
is, the less likely the service rate is enhanced.
The default value is lower than the difference between ExptRate and
Reason
AdptAllowRateUpDown.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.33.93 Adaptive rate allowed up and down

Full Name
Adaptive rate allowed up and down
Abbreviated Name
AdptAllowRateUpDown
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the allowable fluctuation range of the

expected rate. The rate adjustment is completed if the rate is
between the value (ExptRate-AdptAllowRateUpDown) and the value
(ExptRate+AdptAllowRateUpDown).
Instance
Cell
Related FG
0..255
Unit
kbps
Default Value
Related Parameters
N/A
2-1759
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the adjustment precision
determined by AdptRateAmplStep and AdptRateMinlStep. The

parameter can be set to a smaller value if the precision is high. The
parameter must be set to a larger value if the precision is low.
The default value is set to avoid ping-pong adjustment. Generally, a
Reason
fluctuation of 8 kbps around the expected rate is appropriate.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.33.94 Indication of drop rate

Full Name
Indication of drop rate
Abbreviated Name
AllowDropRate
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether rate reduction is allowed. If the

initial rate of a TBF is high, the rate can be reduced only when
AllowDropRate is set to 1.
Instance
Cell
Related FG

2-1760
SJ-20140527134815-013|2015-03-10(R1.1)
0: not allowed drop rate

1: allowed drop rate
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set to 1 if the initial high rate needs to be reduced.
The default value is to 0 so that the initial high rate is not reduced to
Reason
ensure the FTP download rate.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.33.95 continous adaptive adjustment number to judge invalid

adjustment
Full Name
continous adaptive adjustment number to judge invalid adjustment
Abbreviated Name
AdptNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1761
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the threshold of the number of rate

adjustment times. If the number of times that the rate of a TBF is
adjusted exceeds this threshold but the TBF rate does not change,
the TBF is deemed as a dedicated-channel TBF.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The number of times that an adjustment is determined as
invalid is related to the adjustment period. This parameter must

be set properly according to the parameters AdptSched and
AdptSchedTime, to ensure adjustment effect without TBF release
and prevent wrong adjustment decision due to too short adjustment
time.
The default value is set to 3. If AdptSched=0 and
Reason
LargeTPEnhanceThrs=50 Kbytes, the throughput is 150 Kbytes

after three successive rate adjustments. In this case, the TBF is not
released and the period for determining ineffective adjustment is
not too short.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2-1762
SJ-20140527134815-013|2015-03-10(R1.1)
2.33.96 The Maximun Adjustment number

Full Name
The Maximun Adjustment number
Abbreviated Name
MaxAdjstNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of times that the

rate of large throughput services can be adjusted .If the number
of adjustment times exceeds the value of MaxAdjstNum, the rate
adjustment is stopped.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter must be set according to the service models in
the live network to ensure effective rate adjustment. Whether

the adjustment is effective depends on the multiplexing of large
throughput services and the proportion of small throughput services.
To avoid repeated ineffective adjustment, a too large value is not
allowed.
If AdptSched=0 and LargeTPEnhanceThrs=50 Kbytes, the
Reason
throughput is 500 Kbytes after 10 successive adjustments.
Change take effect
No
2-1763
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.33.97 Initial Packet uplink ack priority to send

Full Name
Initial Packet uplink ack priority to send
Abbreviated Name
InitUlAckSendPrio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
By default, in contention resolution state, the Packet uplink ack

message is put into a lower priority signaling queue. If this
parameter is set to 1, the Packet uplink ack message is put into a
higher priority signaling queue.
Instance
Cell
Related FG
0:No
1:Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The default parameter setting is recommended.
The default value is 1, indicating that the Packet uplink ack message
Reason
is put into the high-priority signaling queue.

2-1764
SJ-20140527134815-013|2015-03-10(R1.1)
Change Take Effect
No
Access
Read/Write
OMC Access path
GUI: Managed Element->GSM Logical Configuration>CellInformation Configuration->GPRS Configuration
Newly added parameter

The parameter is modified from type B to type A.
2.34 PS Channel Schedule

Configuration(GPsChannelSchedule)
2.34.1 PS Channel Schedule Configuration ID
Full Name
PS Channel Schedule Configuration ID
Abbreviated Name
GPsChannelScheduleId
Managed Object
PS Channel Schedule Configuration(GPsChannelSchedule)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a PS channel scheduling configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
2-1765
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->GPRS Configuration->PS Channel
Schedule Configuration
N/A
2.34.2 Minimal number of idle CS channel

Full Name
Minimal number of idle CS channel
Abbreviated Name
csChansThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Idle CS channels (including the idle and dynamic TCH channel, and
the static TCH channel) are reserved in the cell for reducing CS call
failure rate.After the CS channel has been applied for successfully, if
the number of idle CS channels in the current cell is smaller than
the threshold, try to perform such operations as starting intelligent
powerup or releasing the PS channel forcibly, so as to ensure the
number of idle CS channels is greater than the threshold.
Instance
Cell
Related FG
0..255
2-1766
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is not recommended to modify this parameter value.
The default value is used to reduce the CS call failure rate and
Reason
ensure that each time idle channels are available for CS access
requests.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.34.3 PS preempt CS support

Full Name
PS preempt CS support
Abbreviated Name
psPrmpCsSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1767
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates when the dynamic channel with preferred

PDCH is occupied, to determine if the channel can be preempted
by PS service.
Instance
Cell
Related FG
ZGO-03-02-009 Flexible Priority Handling of Packet Data Channel
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
PDCHPrecedence
Because PS services can only preempt channels configured with
Parameters
the PDCHPrecedence attribute, this parameter takes effect only

after channels are configured with this attribute.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If wireless resources are insufficient, to ensure the number of
necessary PS channels, you can turn on this switch.
This is a functional switch which supports PS preempting CS and is
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.34.4 CS subscriber moving support

Full Name
CS subscriber moving support

2-1768
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
AllowCsMove
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter describes whether to support moving in the

CS-service cell on a dynamic channel when resources are idle and
the CS channel is released, to make the continuity of available
PS timeslot group maximized. The following determins whether
resources are idle: All idle CS-service channels (including static and
dynamic TCHs) in the cell/ number of available service channels in
the cell <= alarm threshold (ResLimit[3] )for cell channel resources.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
To ensure maximum PS channel continuity and the PS service rate,
provided that wireless resources are sufficient, this function can

be enabled.
It is a feature function switch. By default, it is turned off.
Reason
Change take effect
No
Access
Read/Write
2-1769
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.34.5 EDGE initial downlink allocation by multislot class1

Full Name
EDGE initial downlink allocation by multislot class1
Abbreviated Name
edgeInitDlClass
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the initial downlink timeslot is

allocated in consistent with MS multi-slot class 1 or not.
YES: Initial timeslot allocation is in consistent with MS multi-slot
class 1.
NO: Initial timeslot allocation is in consistent with MS real multi-slot
class.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1770
SJ-20140527134815-013|2015-03-10(R1.1)
If packet channel resources and Abis resources are sufficient, set
the parameter value to No. If packet channel resources or Abis

resources are insufficient, it is recommended to set the parameter
value to Yes.
The default value ensures the burst and small package service
Reason
throughput.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.34.6 GPRS initial downlink allocation by multislot class1

Full Name
GPRS initial downlink allocation by multislot class1
Abbreviated Name
gprsInitDlClass
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is to indicate whether the initial channel allocation

on the downlink is based on multislot capability 1 (i.e. uplink
1 downlink 1) or based on the MS' actual multislot capability
specified in downlink assignment. It is recommended to allocate
in accordance with the multislot capability 1 when the channels
or ABIS transmission resources are inadequate, to prevent rapid
expansion of channels.
Instance
Cell
Related FG
0: No
1: Yes
2-1771
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If both wireless resources and Abis resources are sufficient,
to decrease the number of resource adjustment times, it is

recommended to set the parameter value to No.
The default value is 1, which prevents rapid expansion of channels.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.34.7 PS channel expand support

Full Name
PS channel expand support
Abbreviated Name
psChlExpandSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1772
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether PS channel expansion is

supported. For example, if the number of channels that MS uses
currently is 2+1 and MS can use more timeslots, then the channel
mode is automatically expanded to 3+1 or 4+1 after adjacent CS
channel is released.
When the PS channel expansion is enabled to be supported, and
the ratio of idle TCH channels in the cell is greater than the idle
TCH channel threshold when the PS channel is expanded, PS
channel expansion is performed. After this function is enabled, The
PS service of some radio channels preempted can be resumed to
use more radio channels, to improve the radio channel utilization
and PS service throughput.
Instance
Cell
Related FG
ZGO-03-02-012 PS Channel Extension
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
When a lot of dynamic channels are configured, the condition that
CS services preempt PS services occurs frequently. This function

can be enabled.
After this function is enabled, the PS service of some radio channels
preempted can be resumed to use more radio channels to improve
the radio channel utilization and PS service throughput.
Reason
Change take effect
No
Access
Read/Write
2-1773
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.34.8 Threshold of idle tch for PS channel expand

Full Name
Threshold of idle tch for PS channel expand
Abbreviated Name
tchIdleThsForPSExp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the ratio of idle TCHs of the cell is greater than this threshold,
PS channel expansion will be performed.
The ratio ofdile TCH channels in the cell is calculated as follows:
( number of idle TCH/F channels in the cell + number of TCH/H
channels ( 2 TCH/H channels are regarded as 1 TCH/F channel))/
available service channels in the cell.
Instance
Cell
Related FG
ZGO-03-02-012 PS Channel Extension
0..100
Unit
Default Value
20
Related Parameters
psChlExpandSupport
The idle TCH channel threshold when the PS channel is expanded
Parameters
is valid only when the cell channel expansion function is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1774
SJ-20140527134815-013|2015-03-10(R1.1)
A low threshold is good for PS channel expansion, which can be
enabled when CS services are busy. A high threshold delays the

enabling of PS channel expansion, which can be enabled only when
CS services are idle.
The default low threshold is good for PS channel expansion.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.34.9 PS busy threshold

Full Name
PS busy threshold
Abbreviated Name
psBusyThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the cell busyness is greater than this threshold, a maximum of

one dynamic TCHF channel of new PS services is allowed to be
converted into PD.Cell busyness is calculated in accordance with
the formula: the numerator: "TCHF channels occupied + TCHH
channel occupied" / "2 + non-blocked static PD channel + busy
dynamic PD channel", the denominator: "all available TCH/H/2" +
"available dynamic and static PDCH channels in current status").
Instance
Cell
Related FG
1..100
Unit
%
2-1775
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value is small, PS service expansion of the cell is
restricted.
If over 80% the channels are occupied, the cell has large traffic. In
Reason
this case, it is not recommended to expand PS channels.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.34.10 Maximum PS uplink user per ts

Full Name
Maximum PS uplink user per ts
Abbreviated Name
MaxPsUserPerTsUl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1776
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter describes maximum PS uplink user per ts.

If on site the packet traffic is large, hardware load is high, and
capacity expansion is impossible temporally, the user can modify
this parameter to reduce the number of downlink packet users
supported by the channel. In this way, the packet traffic volume is
actually reduced, which helps reduce hardware load.
If this value is decreased, the KPI indexes of the packet service,
such as downlink TBF link success rate, are reduced indirectly.
Instance
Cell
Related FG
N/A
1..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is small, radio resources may be congested in busy
hours of data services and the uplink TBF link establishment

success rate may be affected.
If the value is large, the user support capability on the PDTCH is not
restricted, but user experience may be affected due to high PDTCH
multiplexing degrees.
The default value is set to the largest value to ensure the basic
Reason
access capability.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-1777
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.34.11 Max PS downlink user per TS

Full Name
Max PS downlink user per TS
Abbreviated Name
MaxPsUserPerTsDl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter describes the maximum PS downlink users allowed

by a single timeslot.
The PS with a single timeslot supports a maximum of 16 users at
downlink. The traffic is medium. The default value is 6. Adjust the
value according to the traffic volume. If this value is decreased,
the KPI indexes of the packet service, such as downlink TBF link
success rate, are reduced indirectly. If the downlink TBF link setup
success rate of packet service is low and the packet channel
resources are sufficient as required by the user, a high value is
recommended.
Instance
Cell
Related FG
N/A
1..16
Unit
N/A
Default Value
16
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1778
SJ-20140527134815-013|2015-03-10(R1.1)
If the value is small, radio resources may be congested in busy
hours of data services and the uplink TBF link establishment

success rate may be affected.
If the value is large, the user support capability on the PDTCH is not
restricted, but user experience may be affected due to high PDTCH
multiplexing degrees.
The default value is set to the largest value to ensure the basic
Reason
access capability.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.34.12 Multislot allocation of extended range cell support

Full Name
Multislot allocation of extended range cell support
Abbreviated Name
MultiTsOfExtendCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an extended cell supports

multi-timeslot allocation. The extended cell can allocate 1 to 3
channels in accordance with MS' multi-timeslot capability.
Instance
Cell
Related FG
ZGO-04-01-008 Multi Timeslot Supported in Extended Cell
0..1
Unit
N/A
Default Value
2-1779
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
It is a feature function switch. It is not recommended to turn on the
switch.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.34.13 Initial priority direction of multislot capability

Full Name
Initial priority direction of multislot capability
Abbreviated Name
InitMultiSlotPriDir
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink priority, downlink priority or

uplink extended dynamic priority of initial assignment.
Instance
Cell
Related FG
N/A
2-1780
SJ-20140527134815-013|2015-03-10(R1.1)
0: uplink priority
1: downlink priority
2: uplink extended dynamic priority
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
No modification is recommended. Uplink priority is used only in
tests.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.34.14 Support the discontinuous PDTCH allocation

Full Name
Support the discontinuous PDTCH allocation
Abbreviated Name
DisContinuAllocSup
Managed Object

3GPP Name
N/A
2-1781
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the support of discontinuous PDTCH

allocation, that is, to allocate more PDTCH channels to PS users.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function can be enabled when necessary. If dynamic channel is
configured, combination of discontinuous PDTCHs may be caused

by the fact that CS preempts PS channels. For example, if timeslots
3, 4 and 6 are available, only 2 channels can be allocated for the
PS service when discontinuous channel allocation is not supported,
but 3 channels will be allocated if discontinuous channel allocation
is supported. Once this function is enabled, PS service will be
allocated many channels and it's more easily for CS service to
preempt the PS channels.
It is a new function, disabled by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-1782
SJ-20140527134815-013|2015-03-10(R1.1)
2.34.15 Support CS preempt PS optimization

Full Name
Support CS preempt PS optimization
Abbreviated Name
CSPreemptPSOpti
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the switch is On and CS-PS preemption exists, call drop does
not occur in PS services if it is not RRBP or TA timeslots.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Check the status of dynamic PS channel when CS is preempting
the dynamic PS channels. Once the switch is turned On, timeslots

other than RRBP and TA will be preempted first. This switch can be
turned On if necessary.
It is a new function, disabled by default.
Reason
Change take effect
No
Access
Read/Write
2-1783
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.34.16 support DTM High Multislot

Full Name
support DTM High Multislot
Abbreviated Name
SuppDtmHMS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to support

the DTM31-33 multi-slot capability.
Instance
Cell
Related FG
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If there is an MS that supports DTM high timeslot capability, you can
enable this parameter as required.
By default, this new function is disabled.
Reason
Change take effect
2-1784
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.34.17 PS channel Minimal Percentage of subcell 1

Full Name
PS channel Minimal Percentage of subcell 1
Abbreviated Name
SC1PsChanMinPct
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In all-dynamic channel cases, this parameter must be configured to

prevent the channels from being preempted as CS channels instead
of PS channels.
Instance
Cell
Related FG
0..50
Unit
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1785
SJ-20140527134815-013|2015-03-10(R1.1)
It is recommended that the parameter is set as required.
In most cases, 10% of channels are reserved for PS services. It
Reason
guarantees both PS services and CS services.
Change Take Effect
No
Access
Read/Write
OMC Access path
GUI: Managed Element->GSM Logical Configuration>CellInformation Configuration->GPRS Configuration->PS

ChannelSchedule Configuration
2.34.18 Minimal number of idle CS channel of subcell 2

Full Name
Minimal number of idle CS channel of subcell 2
Abbreviated Name
SC2csChansThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CoBCCH configuration. To reduce the

CS call failure rate in subcell 2, a certain number of idle CS channels
are reserved in subcell 2, including idle dynamic TCHs and static
TCHs. After a CS channel is requested successfully, if the number
of idle CS channels in subcell 2 is smaller than the parameter value,
intelligent power-on or forced PS channel release is attempted to
ensure that the number of CS channels in subcell 2 is larger than
the parameter value.
Instance
Cell
Related FG
0..255
Unit
N/A
2-1786
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
SC2CSRsvSupport
The SC2CSRsvSupport parameter must be set to 1.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended that the parameter is set to the same value as
the csChansThs parameter.
To reduce the CS call failure rate and ensure that there are sufficient
Reason
idle channels for all CS access requests.
Change Take Effect
No
Access
Read/Write
OMC Access path

2.34.19 SubCell2 support CS Idel channel reserve

Full Name
SubCell2 support CS Idel channel reserve
Abbreviated Name
SC2CSRsvSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether subcell 2 supports channel

reservation for CS services.
Instance
Cell
2-1787
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
SC2csChansThs
If this parameter is set to 1, the number of channels reserved for
Parameters
subcell 2 must be configured.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
To ensure that dynamic channels can be preempted for CS services
in subcell 2, it is recommended that the parameter is set to 1.
This parameter is used for optimization of PS channel preemption
Reason
for CS services. The default value is set to 0 to ensure stable

performance during system upgrade.
Change Take Effect
No
Access
Read/Write
OMC Access path

2.34.20 PS channel Minimal Percentage of subcell 2

Full Name
PS channel Minimal Percentage of subcell 2
Abbreviated Name
SC2PsChanMinPct
Managed Object

3GPP Name
N/A
2-1788
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
In all-dynamic channel cases, this parameter must be configured to

prevent the channels from being preempted as CS channels instead
of PS channels.
Instance
Cell
Related FG
0..50
Unit
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended that the parameter is set as required.
In most cases, 10% of channels are reserved for PS services. It
Reason
guarantees both PS services and CS services.
Change Take Effect
No
Access
Read/Write
OMC Access path

2-1789
SJ-20140527134815-013|2015-03-10(R1.1)
2.35 GPRS-EDGE Schedule

Configuration(GGprsEdgeSchedule)
2.35.1 GPRS-EDGE Schedule Configuration ID
Full Name
GPRS-EDGE Schedule Configuration ID
Abbreviated Name
GGprsEdgeScheduleId
Managed Object
GPRS-EDGE Schedule Configuration(GGprsEdgeSchedule)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a GPRS-EDGE scheduling configuration

ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
2-1790
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Information Configuration->GPRS Configuration->EDGE
Configuration->GPRS-EDGE Schedule Configuration
N/A
2.35.2 Subscriber occupying other preference channel support

Full Name
Subscriber occupying other preference channel support
Abbreviated Name
HybridOccuSupp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
GPRS and EGPRS are available to properties of PreferPsService

of the static PD channel and dynamic channnels. This parameter
describes whether to support GPRS subscriber occupying the
EGPRS preference channel, and whether EDGE subscribers can
occupy the GPRS preference channel.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
PreferPsService
This parameter takes effect only when the PreferPsService channel
Parameters
attribute is configured as GPRS preference or EDGE preference.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1791
SJ-20140527134815-013|2015-03-10(R1.1)
To ensure the access rates of EDGE users and prevent GPRS
users from disturbing EDGE users' rates, set the value to "No". If
wireless resources are limited, to ensure the access success rate
of the PS service, rate decreases can be tolerated, and this value
can be set to "Yes", which allows GPRS and EDGE users share
preference channels.
GPRS users can occupy EDGE preference channels by default.
Reason
EDGE users can occupy GPRS preference channels by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.35.3 PS subscriber moving out of other preference channel

support
Full Name
PS subscriber moving out of other preference channel support
Abbreviated Name
AllowPsMove
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter describes whether to support the subscriber

moving out of other preference channel. That is to say, if a GPRS
subscriber occupies the EDGE preference channel and there is
GPRS subscriber released on iother channel, the system will try to
move GPRS subscribers out of the EDGE preference channel. If the
EDGE subscriber occupies the GPRS preference channel and there
is EDGE subscriber released on other channel, the system will try to
move EDGE subscribers out of the GPRS preference channel.
2-1792
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is a feature function switch. It is not recommended to turn on the
switch.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.35.4 Threshold of GPRS/GPRS,EDGE/EDGE service moving

Full Name
Threshold of GPRS/GPRS,EDGE/EDGE service moving
Abbreviated Name
sfPreferBusyThs
Managed Object

2-1793
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
During this PS application, on the gained preferential channel on

this side, it is better that existing QoS quota / total available QoS
quota is lower than allocated result for this percentage, to calculate
target evaluation target function in combination with un-congeneric
occupying threshold.
If the AllowPsMove switch is enabled, and one GPRS subscriber
on the GPRS preferential channel is released, the system will
try to initiate the moving of GPRS subscribers on the EDGE
preferential channel. If the number of GPRS subscribers occupying
on the EDGE preferential channel exceeds OpPreferBusyThs
(un-congeneric occupying threshold)., and SfPreferBusyThs
(congeneric occupying threshold) is lower than the threshold after
moving, the system will initiate PS moving.
If EDGE subscribers occupy the GPRS preferntial channel, after
EDGE subscribers on other channel are released, the system will try
to move EDGE subscribers out of the GPRS oreferential channel.
Instance
Cell
Related FG
0..100
Unit
Default Value
100
Related Parameters
AllowPsMove
OpPreferBusyThs
This parameter takes effect only when the AllowPsMove switch is
Parameters
enabled. This parameter needs to be used in conjunction with the

OpPreferBusyThs parameter.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1794
SJ-20140527134815-013|2015-03-10(R1.1)
It is recommended to set the value to 100 to make this parameter
invalid. It is not recommended to adjust the default value.

This parameter takes effect only when both GPRS preference
channels and EDGE preference channels are set.
It is recommended to allocate an MS to a heterogeneous preference
channel only when there is no idle granularity to prevent GPRS and
EDGE users share the same channel and avoid affecting EDGE
user rates.
You can set the value to 100% to prevent GPRS and EDGE users
share the same channel and increase EDGE user throughput.
If the ratio of the number of GPRS users to the number of EDGE
users fluctuates greatly, it is recommended to set the value to 80.
Note: The prerequisite of the above value is that both GPRS
preference channels and EDGE preference channels are adequate.
If they are inadequate, adjust the parameter according to actual
conditions.
The default value is set to 100, which means this parameter is
Reason
invalid. It is not recommended to adjust the default value.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.35.5 Threshold of GPRS/EDGE service moving

Full Name
Threshold of GPRS/EDGE service moving
Abbreviated Name
opPreferBusyThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1795
SJ-20140527134815-013|2015-03-10(R1.1)
Description
During this PS application, a better allocation result can be got if

the used QoS quota/total available QoS quota is lower than this
percentage on the obtained preferential channel (GPRS or EDGE)
of the opposite end. This parameter is used in conjunction with
the sfPreferBusyThs parameter to calculate the target evaluation
function.
If the AllowPsMove switch is enabled, and a GPRS subscriber
on the GPRS preferential channel is released, the system will try
to move a GPRS subscriber on the EDGE preferential channel
to the GPRS preferential channel. If the number of GPRS
subscribers on the EDGE preferential channel exceeds the value
of OpPreferBusyThs, and the number of GPRS subscribers on the
GPRS preferential channel after migration is less than the value of
SfPreferBusyThs, the system will initiate PS migration. The same
rule is also applicable to EDGE.
If there are EDGE subscribers on the GPRS preferential channel,
after EDGE subscribers on other channels are released, the system
will try to move EDGE subscribers out of the GPRS preferential
channel.
Instance
Cell
Related FG
0..100
Unit
Default Value
Related Parameters
AllowPsMove
PDCHPrecedence
SfPreferBusyThs
This parameter takes effect only when the AllowPsMove switch is
Parameters
enabled. This parameter needs to be used in conjunction with the

SfPreferBusyThs parameter.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The recommended value is 0. In this case the parameter is invalid.
It is not recommended to adjust the default value.
The default value is set to 0, which means this parameter is invalid.
Reason
It is not recommended to adjust the default value.
Change take effect
2-1796
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.35.6 Use parameter of 'EGPRS Prior to GPRS' in Cell

Full Name
Use parameter of 'EGPRS Prior to GPRS' in Cell
Abbreviated Name
UseCellEGPRSPriPara
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to use the EGPRS Prior to GPRS

parameter in the cell. When the EGPRS Prior to GPRS function is
enabled and this parameter is set to "Yes", the parameter cell-level
allocating weights of EGPRS is used. The number of blocks
allocated to EGPRS and GPRS are adjusted according to a certain
ratio.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1797
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
If a cell needs customized configuration, set this parameter to 1. If
the cell does not need customized configuration, and BSC-level

parameters are configured, this parameter is set to 0.
The default value is set based on the actual conditions.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.35.7 Allocating weights of EGPRS

Full Name
Allocating weights of EGPRS
Abbreviated Name
EGPRSAllocW
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the allocating weights of EGPRS. When

the EGPRS Prior to GPRS function is enabled and the EGPRS Prior
to GPRS parameter is used, this parameter is used. The number of
blocks allocated to EGPRS and GPRS are adjusted according to
a certain ratio.
If the value is 0, the cell EGPRS service cannot be allocated
with blocks. If the value is 100, the cell GPRS service cannot be
allocated with blocks.
Instance
Cell
Related FG

2-1798
SJ-20140527134815-013|2015-03-10(R1.1)
0..100
Unit
N/A
Default Value
70
Related Parameters
UseCellEGPRSPriPara
This parameter takes effect only when both Info_4_6 and Info1_7_5
Parameters
are enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If a cell needs customized configuration, cell-level customized
parameters are configured. If EDGE and GPRS subscribers share

the same channel, the greater the parameter value is, the more
blocks EDGE subscribers can get, and the higher the rate is. The
smaller the parameter value, the less blocks EDGE subscribers can
get, and the lower the rate is. This parameter is applicable to both
the dynamic and static data service channels.
The default value is set based on the speeds of the EGPRS and
Reason
GPRS in the cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.36 NACC Configuration(GNACC)

2.36.1 NACC Configuration ID
Full Name
NACC Configuration ID
2-1799
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
GNACCId
Managed Object
NACC Configuration(GNACC)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an NACC configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->GPRS Configuration->NACC
Configuration
N/A
2-1800
SJ-20140527134815-013|2015-03-10(R1.1)
2.36.2 CCN mode support

Full Name
CCN mode support
Abbreviated Name
ccnActive
Managed Object
3GPP Name
CCN_ACTIVE
3GPP Reference
N/A
Description
The network uses the parameter CCN_ACTIVE in the GPRS Cell

Options IE of SI13 on the BCCH to enable or disable the CCN
mode in the local cell when an MS reselects a GSM neighbor cell.
The CCN mode means that the MS notifies the network of cell
reselection through the PACKET CELL CHANGE NOTIFICATION
message. When the GPRS Cell Options IE does not contain the
parameter CCN_ACTIVE, or the parameter CCN_ACTIVE is set
to disable the CCN mode, the MS does not enter the CCN mode.
When the parameter CCN_ACTIVE in the local cell is set to enable
the CCN mode, and a cell reselection to a GSM neighbor cell is
decided, the parameter CCN_SUPPORTED in this neighbor cell
determines whether the MS can enter the CCN mode.
If CCN_SUPPORTED does not exist, the MS assumes that the CCN
mode is enabled towards all neighbor cells.
If CCN_SUPPORTED exists and is set to disable the CCN mode,
the MS does not enter the CCN mode.
If CCN_SUPPORTED exists and is set to enable the CCN mode,
the MS enters the CCN mode.
The network can also notify a specific MS whether the parameter
CCN_ACTIVE in the serving cell is set to enable the CCN mode
through a Packet Measurement Order message, and whether the
parameter CCN_ACTIVE in the target cell is set to enable the
CCN mode through a Packet Cell Change Order message or PS
Handover Command message. The parameter CCN_ACTIVE on
the PACCH has a higher priority than that broadcast through system
information. The MS uses the CCN mode only when it is in NC0
and NC1 modes.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
2-1801
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
NACCSupport
CCNActive
SIStatusInd
Parameters
same time when the NACC feature is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Enabling the function helps reduce the interval of cell reselection
and impact on PS implemented. It is recommended to enable the

parameter.
Enabling the function helps reduce the interval of cell reselection
Reason
and impact on PS implemented.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.100/V6.30.100
N/A
2.36.3 Cell support system message status flow

Full Name
Cell support system message status flow
Abbreviated Name
siStatusInd
Managed Object
3GPP Name
SI_STATUS_IND
3GPP Reference
N/A
2-1802
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether the cell supports the system

message status flow. It is broadcast to MSs through SI13 and
PSI13, describing whether the network supports the Packet SI
Status flow. An MS notifies the network side of current receiving
status of the SI message saved by sending the Packet SI Status
message on PACCH. After receiving the Packet SI Status message,
the network side sends the SI message required by the MS through
the Packet Serving Cell Data message in accordance with the
SI receiving indication carried in the message. In the process
of network-aided cell reselection, when the MS receives all the
required system messages of the new cell in the old cell and obtains
an access to the new cell, and the new cell supports the Packet SI
Status flow, the MS obtains the system message of the new cell in
accordance with the above flow.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
NACCSupport
CCNSupport
CCNActive
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Enabling the function helps restore services immediately after
reselection to a new cell. It is recommended to enable the

parameter.
Enabling the function helps restore services immediately after
Reason
reselection to a new cell.
Change take effect
No
2-1803
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.100/V6.30.100
N/A
2.36.4 3G NACC support

Full Name
3G NACC support
Abbreviated Name
support3GCCN
Managed Object
3GPP Name
3G_CCN_ACTIVE
3GPP Reference
N/A
Description
The network uses the 3G_CCN_ACTIVE parameter in SI2Quater

on the BCCH to enable or disable the CCN mode when an MS
reselects a 3G cell.
If 3G_CCN_ACTIVE is not specified or it disables the CCN mode,
the MS cannot use the CCN procedure in the reselection of a 3G
cells. If 3G_CCN_ACTIVE enables the CCN mode, the MS can
use the CCN procedure in the reselection of a 3G cells. The
3G_CCN_ACTIVE parameter can also be sent to the MS through
a PACKET MEASUREMENT ORDER or PACKET CELL CHANGE
ORDER message. For the PACKET CELL CHANGE ORDER
message, the parameter is applicable to the target cell.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1804
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The function can be enabled based on the actual conditions during
2/3G operations. The function is used when the MS needs to

reselect a 3G cell and enter CCN mode.
The default value is set based on the actual conditions during 2/3G
Reason
operations. The function is used when the MS needs to reselect a

3G cell and enter CCN mode.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37 NC2 Configuration(GCellPsNc2)

2.37.1 NC2 Configuration ID
Full Name
NC2 Configuration ID
Abbreviated Name
GCellPsNc2Id
Managed Object
NC2 Configuration(GCellPsNc2)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an NC2 configuration ID.
Instance
BSC
Related FG
N/A
2-1805
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->GPRS Configuration->NC2
Configuration
N/A
2.37.2 Cell reselection offset in idle

Full Name
Cell reselection offset in idle
Abbreviated Name
reselOff1
Managed Object
3GPP Name
3GPP Reference
N/A
2-1806
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is used by an MS. It is broadcast to MSs through

a system message by BTS. In the GPRS system, C32 is used as
the standard for cell reselection. Similar to the C2 standard in GSM,
there is a cell reselection offset parameter (ReselOff) for calculation
in the C32 standard. When the offset indicated by this parameter is 0
dB, it does not need to be displayed in the packet system message.
This parameter is used during reselection in idle status, and only
functions when the PBCCH is configured.
Instance
Related FG
Cell
ACTIVE Status
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is related to PBCCH. It is not recommended to use
this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-1807
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.3 Cell reselection temporary offset in idle

Full Name
Cell reselection temporary offset in idle
Abbreviated Name
tempOffset1
Managed Object
3GPP Name
3GPP Reference
N/A
Description

there is a temporary offset parameter (TempOffset) for calculation in
the C32 standard, which provides the C32 standard with a negative
offset.
Instance
Cell
Related FG

ACTIVE Status
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
Change take effect
No
2-1808
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.4 Penalty time of cell reselection in idle

Full Name
Penalty time of cell reselection in idle
Abbreviated Name
penalTime1
Managed Object
3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
N/A
Description

there is a temporary offset parameter (TempOffset) for calculation in
the C32 standard, which provides the C32 standard with a negative
offset. The effective time depends on the PenalTime parameter
of cell reselection.
Instance
Related FG
Cell
ACTIVE Status
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1809
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.5 Interval of reselecting the same cell in idle

Full Name
Interval of reselecting the same cell in idle
Abbreviated Name
t_Resel1
Managed Object
3GPP Name
T_RESEL
3GPP Reference
N/A
Description
This parameter is used by an MS. It is broadcast to MSs through a

system message by BTS. When the MS performs a cell reselection,
which causes it to be released from the local cell abnormally, it is not
allowed to reselect the local cell again within the T_RESEL period,
unless there is no other cell for selection. When the time indicated
by this parameter is 5 seconds (default value), it does not need to
be broadcast to the MS in the PSI3 message.
Instance
Cell
2-1810
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

ACTIVE Status
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.6 Threshold of HSC signal level in idle

Full Name
Threshold of HSC signal level in idle
Abbreviated Name
hcs_Thr1
Managed Object
3GPP Name
HCS_THR
2-1811
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter is used by an MS. It is an HCS parameter and

broadcast to MSs through a system message by BTS, indicating the
HCS signal strength threshold of the cell.
Instance
Cell
Related FG

ACTIVE Status
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-1812
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.7 HCS Priority in idle

Full Name
HCS Priority in idle
Abbreviated Name
prioClass1
Managed Object
3GPP Name
PRIORITY_CLASS
3GPP Reference
N/A
Description
This parameter is used by an MS. It is an HCS parameter and

broadcast to MSs through a system message by BTS, indicating the
HCS priority of the cell.
Instance
Cell
Related FG

ACTIVE Status
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
Change take effect
No
Access
Read/Write
2-1813
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
N/A
2.37.8 C31 hysteresis in idle

Full Name
C31 hysteresis in idle
Abbreviated Name
c31_Hyst1
Managed Object
3GPP Name
C31_HYST
3GPP Reference
N/A
Description

a system message by BTS, indicating whether the CellReselHys
parameter is applicable to the C31 standard.
Instance
Cell
Related FG

ACTIVE Status
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
2-1814
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.9 GPRS cell reselection hysteresis in idle

Full Name
GPRS cell reselection hysteresis in idle
Abbreviated Name
reselHys1
Managed Object
3GPP Name
GPRS_CELL_RESELECT_HYSTERESIS
3GPP Reference
N/A
Description

system message by BTS.
When the MS reselects a GPRS cell, if the source cell and the
target cell are in different location areas, the MS initiates a Location
Update (LU) procedure after reselection. The C32 values obtained
on the boundary between two adjacent cells are different due to
the fading characteristic of radio channel, resulting in frequent
reselection between cells.
The time interval between the two cell reselection operations is
not less than 15 seconds, but it is too short for location update of
the MS. Therefore, the signaling traffic in the network dramatically
increases, radio resources cannot be fully utilized and the call
success rate decreases because the MS cannot respond to paging
during the location update.
To reduce the effect on the system performance, the CELL
RESELECTION HYSTERESIS parameter is specified in the
2-1815
SJ-20140527134815-013|2015-03-10(R1.1)
specifications. This parameter specifies that the signal level in the

adjacent cell (different from the serving cell) must be higher than
that in the serving cell, and the difference between the signal value
in the serving cell and adjacent cell must be higher than a specified
value. In this case, the MS initiates cell reselection.
When there is a huge traffic in some areas, and traffic overload
value in adjacent cells with different LACs.
If the adjacent cells in different location areas have large overlapped
If the adjacent cells with different LACs have poor coverage in
overlapped areas, that means there is a coverage gap, or the
adjacent cell is located in an area with few slow moving objects
(indicating that the CRH level is 2 dB through 6 dB).
Instance
Cell
Related FG

ACTIVE Status
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
This parameter is related to the PBCCH. It is not recommended to
Reason
use this parameter.
Change take effect
No
2-1816
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.10 Routing reselection hysteresis in idle

Full Name
Routing reselection hysteresis in idle
Abbreviated Name
raReselHys1
Managed Object
3GPP Name
RA_RESELECT_HYSTERESIS
3GPP Reference
N/A
Description

a system message by BTS, indicating the extra hysteresis value
used in selecting a cell in another routing area when the MS is in
STANDBY or READY status. When this parameter has the same
value as CellReselHys, it does not need to be broadcast in the PSI3
message.
Instance
Related FG
Cell
ACTIVE Status
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1817
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.11 Random access attempt permitted in idle

Full Name
Random access attempt permitted in idle
Abbreviated Name
radAcRetry1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

system message by BTS, indicating whether an MS is allowed to
attempt to access another cell, if any.
If there is an abnormal release in the packet transmission, the MS
will discard all ongoing TBFs. If the MS is allowed to access other
cells, it should perform abnormal cell reselection, and establish
TBFs after initializing the new cell. If there are other suitable cells,
the MS cannot reselect the original cell within T_RESEL seconds.
Instance
Cell
2-1818
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

ACTIVE Status
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
use this parameter.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.12 Usage of cell reselection offset in idle

Full Name
Usage of cell reselection offset in idle
Abbreviated Name
c32_Qual1
Managed Object
2-1819
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
C32_QUAL
3GPP Reference
N/A
Description

a system message by BTS, indicating whether to use exceptional
rules when ReselOff is used.
Instance
Cell
Related FG

ACTIVE Status
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-1820
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.13 GPRS access minimal signal level in idle

Full Name
GPRS access minimal signal level in idle
Abbreviated Name
rxLevAsMin1
Managed Object
3GPP Name
3GPP Reference
N/A
Description

It indicates the minimum receiving level for an MS to access the
GPRS system. To prevent an MS from accessing the system at a
low receiving signal level (generally the poor communication quality
cannot guarantee normal communication after the MS accesses
the system), which causes radio resource waste, it is specified in
the GSM system that the receiving signal level of the MS must be
greater than a threshold so that the MS can access the network,
that is, rxLevAsMin1 (the minimum receiving level that allows an MS
to access the cell).
In addition, it is also one of the standards for MS to make cell
selection and reselection (a parameter to calculate C31 and C32).
Instance
Cell
Related FG

ACTIVE Status
0..63
Unit
N/A
Default Value
12
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
2-1821
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.14 HCS exist in idle

Full Name
HCS exist in idle
Abbreviated Name
hcs_Exist1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used by an MS. It is a Hierarchical Cell Structure

(HCS) parameter and broadcast to MSs via a system message
by BTS. This parameter indicates whether the HCS parameters
(PriorityClass and HCSTHr) exist in the cell. If the local cell does
not use HCS parameters, the HCS parameters of other cells will
also be ignored, that is, all the cells use the infinite threshold of
HCS signal strength.
Instance
Cell
Related FG

ACTIVE Status
0: No
1: Yes
Unit
N/A
2-1822
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.15 GPRS MAX initial access signal level in idle

Full Name
GPRS MAX initial access signal level in idle
Abbreviated Name
msTxMaxCCH1
Managed Object
3GPP Name
3GPP Reference
N/A
2-1823
SJ-20140527134815-013|2015-03-10(R1.1)
Description

When an MS is communicating with the BTS, the MS's power is
controlled by the network through a power command. That is,
the output power must be the same as the transmission power
specified by the network. If the MS's power level cannot reach the
transmission power, it should output the power that is closest to
the transmission power.
This parameter is one of the parameters for the MS to perform cell
selection and reselection, involved in the calculation of C1 and C2.
as small as possible. Obviously, the larger the cell coverage is, the
higher the MS transmission power is. Generally, this parameter is
set to 5 (for a GSM900 MS) or 2 (for a GSM1800 MS).
In the actual application, a dialing test can be performed at the cell
edge after this parameter is set to test the MS's access success rate
and access time. The parameter value can be increased or reduced
in accordance with the test results.
This parameter value is the same as that in the appendix.
Instance
Cell
Related FG

ACTIVE Status
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1824
SJ-20140527134815-013|2015-03-10(R1.1)
this parameter.
Reason
use this parameter.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.16 Cell reselection offset in transfer

Full Name
Cell reselection offset in transfer
Abbreviated Name
reselOff2
Managed Object
3GPP Name
3GPP Reference
N/A
Description
This parameter is used by an MS. The MS is informed on the

PACCH. In the GPRS system, C32 is used as the standard for
cell reselection. Similar to the C2 standard in GSM, there is a cell
reselection offset parameter (ReselOff) for calculation in the C32
standard. When the offset indicated by this parameter is 0 dB, it
does not need to be displayed in the packet system message.
This parameter is used for cell reselection in transmission state.
Instance
Cell
Related FG

ACTIVE Status
0..31
Unit
N/A
2-1825
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.17 Cell reselection temporary offset in transfer

Full Name
Cell reselection temporary offset in transfer
Abbreviated Name
tempOffset2
Managed Object
3GPP Name
3GPP Reference
N/A
2-1826
SJ-20140527134815-013|2015-03-10(R1.1)
Description

PACCH. In the GPRS system, C32 is used as the standard for cell
reselection. Similar to the C2 standard in GSM, there is a temporary
offset parameter (TempOffset) for calculation in the C32 standard,
which provides the C32 standard with a negative offset.
Instance
Cell
Related FG

ACTIVE Status
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-1827
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.18 Penalty time of cell reselection in transfer

Full Name
Penalty time of cell reselection in transfer
Abbreviated Name
penalTime2
Managed Object
3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
N/A
Description

PACCH. In the GPRS system, C32 is used as the standard for
cell reselection. Similar to the C2 standard in GSM, there is a
temporary offset parameter (TempOffset) for calculation in the C32
standard, which provides the C32 standard with a negative offset.
The effective time depends on the PenalTime parameter of cell
reselection.
Instance
Cell
Related FG

ACTIVE Status
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter.
Reason
Change take effect
No
2-1828
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.19 Interval of reselecting the same cell in transfer

Full Name
Interval of reselecting the same cell in transfer
Abbreviated Name
t_Resel2
Managed Object
3GPP Name
T_RESEL
3GPP Reference
N/A
Description

PACCH. When the MS performs a cell reselection, which causes it
to be released from the local cell abnormally, it is not allowed to
reselect the local cell again within the T_RESEL period, unless
there is no other cell for selection. When the time indicated by
this parameter is 5 seconds (default value), it does not need to be
broadcast to the MS in the PSI3 message.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1829
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
The longer the interval is, the longer the time during which the MS is
not allowed to reselect to return to the cell is.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.20 Threshold of HSC signal level in transfer

Full Name
Threshold of HSC signal level in transfer
Abbreviated Name
hcs_Thr2
Managed Object
3GPP Name
HCS_THR
3GPP Reference
N/A
Description
This parameter is used by an MS. It is an HCS parameter, and

informed to an MS on the PACCH. It indicates the HCS signal
strength threshold of the cell.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
2-1830
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is similar to the lowest access level threshold. The
lower the threshold is, the easier it is to access the cell. If you do not
want an MS to access the cell, increase the threshold.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.21 HCS Priority in transfer

Full Name
HCS Priority in transfer
Abbreviated Name
prioClass2
Managed Object
3GPP Name
PRIORITY_CLASS
3GPP Reference
N/A
Description
This parameter is used by an MS. It is an HCS parameter, and

informed to an MS on the PACCH. It indicates the HCS priority of
the cell.
Instance
Cell
2-1831
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.22 C31 hysteresis in transfer

Full Name
C31 hysteresis in transfer
Abbreviated Name
c31_Hyst2
Managed Object
3GPP Name
C31_HYST
3GPP Reference
N/A
2-1832
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is used by an MS. It is informed to an MS on the

PACCH and indicates whether the CellReselHys parameter is
applicable to the C31 standard.
Instance
Related FG
Cell
ACTIVE Status
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used for reselection in NC2 mode. When the
CellReselHys parameter is applicable to the C31 standard, set this

parameter to Yes.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-1833
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.23 GPRS cell reselection hysteresis in transfer

Full Name
GPRS cell reselection hysteresis in transfer
Abbreviated Name
reselHys2
Managed Object
3GPP Name
GPRS_CELL_RESELECT_HYSTERESIS
3GPP Reference
N/A
Description

PACCH.
When the MS reselects a GPRS cell, if the source cell and the
target cell are in different location areas, the MS initiates a Location
Update (LU) procedure after reselection. The C32 values obtained
on the boundary between two adjacent cells are different due to
the fading characteristic of radio channel, resulting in frequent
reselection between cells.
The time interval between the two cell reselection operations is
not less than 15 seconds, but it is too short for location update of
the MS. Therefore, the signaling traffic in the network dramatically
increases, radio resources cannot be fully utilized and the call
success rate decreases because the MS cannot respond to paging
during the location update.
To reduce the effect on the system performance, the CELL
RESELECTION HYSTERESIS parameter is specified in the
specifications. This parameter specifies that the signal level in the
adjacent cell (different from the serving cell) must be higher than
that in the serving cell, and the difference between the signal value
in the serving cell and adjacent cell must be higher than a specified
value. In this case, the MS initiates cell reselection.
value in adjacent cells with different LACs.
If the adjacent cells in different location areas have large overlapped
If the adjacent cells with different LACs have poor coverage in
adjacent cell is located in an area with few slow moving objects
Instance
Cell
2-1834
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

ACTIVE Status
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

value in neighbor cells with different LACs.
If the neighbor cells in different location areas have large overlapped
If the neighbor cells with different LACs have poor coverage in
neighbor cell is located in an area with few slow moving objects
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-1835
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.24 Routing reselection hysteresis in transfer

Full Name
Routing reselection hysteresis in transfer
Abbreviated Name
raReselHys2
Managed Object
3GPP Name
RA_RESELECT_HYSTERESIS
3GPP Reference
N/A
Description

PACCH, indicating the extra hysteresis value used in selecting a cell
in another routing area when the MS is in STANDBY or READY
status. When this parameter has the same value as CellReselHys, it
does not need to be broadcast in the PSI3 message.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the neighbor cells in different routing areas have large overlapped
Reason
Change take effect
No
Access
Read/Write
2-1836
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2.37.25 Random access attempt permitted in transfer

Full Name
Random access attempt permitted in transfer
Abbreviated Name
radAcRetry2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

PACCH, indicating whether the MS is allowed to attempt to access
another cell, if any.
If there is an abnormal release in the packet transmission, the MS
will discard all ongoing TBFs. If the MS is allowed to access other
cells, it should perform abnormal cell reselection, and establish
TBFs after initializing the new cell. If there are other suitable cells,
the MS cannot reselect the original cell within T_RESEL seconds.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1837
SJ-20140527134815-013|2015-03-10(R1.1)
this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.26 Usage of cell reselection offset in transfer

Full Name
Usage of cell reselection offset in transfer
Abbreviated Name
c32_Qual2
Managed Object
3GPP Name
C32_QUAL
3GPP Reference
N/A
Description

PACCH, indicating whether to use exceptional rules when ReselOff
is used.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
2-1838
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured in accordance with the requirements. If
the parameter is set to Yes, the rules described in the 45008 10.1.3
Cell Re-selection Algorithm in the protocol are used for ReselOff.
This parameter is related to the C31 and C32 criteria. It is not
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.27 GPRS access minimal signal level in transfer

Full Name
GPRS access minimal signal level in transfer
Abbreviated Name
rxLevAsMin2
Managed Object
3GPP Name
3GPP Reference
N/A
2-1839
SJ-20140527134815-013|2015-03-10(R1.1)
Description

PACCH.
It indicates the minimum receiving level for an MS to access the
GPRS system. To prevent an MS from accessing the system at a
low receiving signal level (generally the poor communication quality
cannot guarantee normal communication after the MS accesses
the system), which causes radio resource waste, it is specified in
the GSM system that the receiving signal level of the MS must be
greater than a threshold so that the MS can access the network,
that is, rxLevAsMin1 (the minimum receiving level that allows an MS
to access the cell).
In addition, it is also one of the standards for MS to make cell
selection and reselection (a parameter to calculate C31 and C32).
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
12
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used for reselection. If the parameter value is too
small, too many MSs will access the system, and thus the system
load is high. If the parameter value is too larger, more calls will be
dropped and the reselection success rate will be reduced.
Reason
Change take effect
No
Access
Read/Write
2-1840
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2.37.28 HCS exist in transfer

Full Name
HCS exist in transfer
Abbreviated Name
hcs_Exist2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used by an MS. It is a Hierarchical Cell Structure

(HCS) parameter, and informed to an MS on the PACCH. This
parameter indicates whether the HCS parameters (PriorityClass
and HCSTHr) exist in the cell. If the local cell does not use HCS
parameters, the HCS parameters of other cells will also be ignored,
that is, all the cells use the infinite threshold of HCS signal strength.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1841
SJ-20140527134815-013|2015-03-10(R1.1)
When different cell reselection priorities exist in the network, if
C31 is determined by the cell reselection priority and signal level

threshold, set this parameter to Yes. For cells with the same cell
selection priority, C32 is used.
Reason
use this parameter.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.29 GPRS MAX initial access signal level in transfer

Full Name
GPRS MAX initial access signal level in transfer
Abbreviated Name
msTxMaxCCH2
Managed Object
3GPP Name
3GPP Reference
N/A
Description

PACCH.
When an MS is communicating with the BTS, the MS's power is
controlled by the network through a power command. That is,
the output power must be the same as the transmission power
specified by the network. If the MS's power level cannot reach the
transmission power, it should output the power that is closest to
the transmission power.
This parameter is one of the parameters for the MS to perform cell
selection and reselection, involved in the calculation of C1 and C2.
2-1842
SJ-20140527134815-013|2015-03-10(R1.1)

higher the MS transmission power is. Generally, this parameter is
set to 5 (for a GSM900 MS) or 2 (for a GSM1800 MS).
In the actual application, a dialing test can be performed at the cell
edge after this parameter is set to test the MS's access success rate
and access time. The parameter value can be increased or reduced
in accordance with the test results.
This parameter value is the same as that in the appendix.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
higher the MS transmit power is. Generally, this parameter is set to
5 (for a GSM900 MS) or 2 (for a GSM1800 MS).
Reason
Change take effect
No
2-1843
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.30 NC hold time in non-drx mode

Full Name
NC hold time in non-drx mode
Abbreviated Name
ncNoDrxPer
Managed Object
3GPP Name
NC_ NON_DRX_PERIOD
3GPP Reference
N/A
Description
This parameter is used by an MS. It is a network control survey

parameter. It is broadcast to MSs through the SI2Quater system
message on BCCH when the network operates in NC1 or NC2
mode. This parameter sets an MS to be in No-DRX for a period of
time after it sends the NC measurement report.
On PACCH, this parameter can also be sent to a certain MS through
the PACKET MEASUREMENT ORDER or PACKET CELL CHANGE
message, the parameter is applicable to the target cell.
Instance
Cell
Related FG
0..7
Unit
Default Value
Related Parameters
CtrlOrder
This parameter takes effect when NC1 or NC2 is enabled.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1844
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
In non-DRX mode, MS power consumption increases. Therefore, if
the DRX_Timer_Max value is large, the TBF creation duration can

be shortened, but MS power consumption increases. If the value
is small, MS power consumption is reduced, but the paging flow
added in the DRX mode causes system signaling load and data
transmission delay to increase.
The default value 0.48 s is set based on the considerations: saving
Reason
electricity and shortening TBF setup duration.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.31 Packet idle mode

Full Name
Packet idle mode
Abbreviated Name
ncRepPerI
Managed Object
3GPP Name
NC_REPORTING_PERIOD_I
3GPP Reference
N/A
2-1845
SJ-20140527134815-013|2015-03-10(R1.1)
Description

mode. This parameter sets the interval at which an MS submits the
cell reselection measurement report when it is in idle mode.
This parameter can also be sent to a certain MS through the
PACKET MEASUREMENT ORDER or PACKET CELL CHANGE
message, the parameter is applicable to the target cell. The
message is sent to the specific MS.
Instance
Cell
Related FG
0: 0.48
1: 0.96
2: 1.92
3: 3.84
4: 7.68
5: 15.36
6: 30.72
7: 61.44
Unit
Default Value
Related Parameters
CtrlOrder
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The NC2 function is not used in this version, so it is not
recommended to adjust the value.
Reason
Change take effect
No
Access
Read/Write
2-1846
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
N/A
2.37.32 Packet transmission mode

Full Name
Packet transmission mode
Abbreviated Name
ncRerPerT
Managed Object
3GPP Name
NC_REPORTING_PERIOD_T
3GPP Reference
N/A
Description

mode. This parameter sets the interval at which an MS submits
the cell reselection measurement report when it is in packet
transmission mode. When ETWORK_CONTROL_ORDER is NC0,
this parameter may not be broadcast in the PSI5 message.
This parameter can also be sent to a certain MS through the
PACKET MEASUREMENT ORDER or PACKET CELL CHANGE
message, the parameter is applicable to the target cell. The
message is sent to the specific MS.
Instance
Cell
Related FG
0: 0.48
1: 0.96
2: 1.92
3: 3.84
4: 7.68
5: 15.36
6: 30.72
7: 61.44
Unit
2-1847
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
CtrlOrder
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value is, the more frequently
measurement reports are submitted, and the more timely and

accurate it is for the network to calculate measurement reports and
control cell reselection, but the higher the signaling load is. This
parameter should be set in accordance with the actual network load.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.33 Extended measurement report order

Full Name
Extended measurement report order
Abbreviated Name
exMeaOrder
Managed Object
3GPP Name
EXT_MEASUREMENT_ORDER
3GPP Reference
N/A
2-1848
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is used by an MS. It is an extended measurement

parameter, and broadcast to MSs through the PSI5 message,
indicating whether an MS can perform extended measurement, and
how to explain the other extended measurement parameters (such
as ExtRepType and ExtRepPer). This parameter value is as follows:
EMO: The MS should not perform extended measurement.
EM1: The MS should send the extended measurement report to
the network.
Instance
Cell
Related FG
N/A
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-1849
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.34 Type of extended measurement report

Full Name
Type of extended measurement report
Abbreviated Name
extRepType
Managed Object
3GPP Name
EXT_REPORTING_TYPE
3GPP Reference
N/A
Description
This parameter is used by an MS. It is an extended survey

parameter, and broadcast to MSs through the PSI5 message
on PBCCH, indicating the type of the extended survey report
of an MS. This parameter is valid and sent through the PSI5
message when the extended measurement report command
EXT_MEASUREMENT_ORDER is EM1.
Type 1: This type of report must be extended if the frequency
points for the extended survey are among the six strongest carrier
frequencies, no matter whether the BSIC decoding is successful.
The report should contain the receiving signal level and the
successfully decoded BSIC (if any).
Type 2: This type of report must be extended if all the frequency
points for the extended survey are located in the six strongest carrier
frequencies, the BSIC decoding is successful and the NCC part is
allowed for survey. The report should contain the receiving signal
level and the successfully decoded BSIC.
Type 3: This type of report is used to report all the frequency points
for the extended survey. No BSIC decoding is needed. The report
should contain the receiving signal level. Besides, the interference
of each carrier frequency shall be reported.
Instance
Cell
Related FG
N/A
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1850
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.35 Report period of extended measurement

Full Name
Report period of extended measurement
Abbreviated Name
extRepPer
Managed Object
3GPP Name
EXT_REPORTING_PERIOD
3GPP Reference
N/A
Description
This parameter is used by an MS. It is an extended survey

parameter, and broadcast to MSs through the PSI5 message
on PBCCH, indicating the interval at which the extended survey
report is sent. This parameter is valid and sent through the PSI5
message when the extended measurement report command
EXT_MEASUREMENT_ORDER is EM1.
Instance
Cell
Related FG
N/A
2-1851
SJ-20140527134815-013|2015-03-10(R1.1)
0: 60
1: 120
2: 240
3: 480
4: 960
5: 1920
6: 3840
7: 7680
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.36 The size of test report's slip window

Full Name
The size of test report's slip window
Abbreviated Name
wnd
2-1852
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used when the NC2 network controls the cell
reselection. When the number of measurement reports reaches the
parameter value, the measurement reports are processed.
Instance
Cell
Related FG
1..8
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the window size is, the more the random interference
is. The larger the window size is, the less precise it is to reflect
real-time changes in the wireless network.
The default value is set to ensure accurate and rapid reselection.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-1853
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.37 Minimum measurement reports in slip window to avoid

penalty
Full Name
Minimum measurement reports in slip window to avoid penalty
Abbreviated Name
allowedRepNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used when the NC2 network controls the cell
reselection. When the adjacent cell receives the average level, and
the number of valid measurement reports received in slip window
is lower than the specified value, the calculated value shall be
punished.
Instance
Cell
Related FG
1..6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater the parameter value is, the more times the penalty
algorithm is implemented on the neighbor cell, and the higher the

reselection threshold is. Therefore, the network cannot notify the
MS of reselection immediately, which may result in TBF failure. The
smaller the parameter value is, the lower the reselection threshold
is, and the more frequently the MS reselects cells.
The default value is set to ensure accurate and rapid reselection.
Reason
Change take effect
No
2-1854
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.38 Enable uplink interference decision in NC2

Full Name
Enable uplink interference decision in NC2
Abbreviated Name
nc2UlInterControl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow uplink interference

decision in NC2.
0: not allowed
1: allowed
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
CtrlOrder
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1855
SJ-20140527134815-013|2015-03-10(R1.1)
Based on the signal strength, it is recommended to enable the
function if quality is taken into account when the decision is made.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.39 Enable downlink interference decision in NC2

Full Name
Enable downlink interference decision in NC2
Abbreviated Name
nc2DlInterControl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow downlink interference

decision in NC2.
0: not allowed
1: allowed
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
CtrlOrder
2-1856
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Based on the signal strength, it is recommended to enable the
function if quality is taken into account when the decision is made.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.40 P of uplink interference decision in NC2

Full Name
P of uplink interference decision in NC2
Abbreviated Name
nc2UlLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the P value of uplink interference

decision. Uplink interference is made if more than P values out
of N AvRxQualUL values satisfy the inequality AvRxQualUL(s) <
InterfFQSS(s). Where, AvRxQualUL(s) is the average uplink bit
error rate (MEAN_BEP), and InterfFQSS(s) is the bit error rate
threshold FQSS calculated by AvRxLevUL(s).
2-1857
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
nc2UlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater the parameter value is, the more precise the reselection
decision is, but the longer the decision-making is. The smaller the
parameter value is, the less precise the reselection decision is, but
the shorter the decision-making is.
The default value is set to ensure rapid and correct decision.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.41 N of uplink interference decision in NC2

Full Name
N of uplink interference decision in NC2
Abbreviated Name
nc2UlLevN
Managed Object
2-1858
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the N value of uplink interference

decision. Uplink interference is made if more than P values out
of N AvRxQualUL values satisfy the inequality AvRxQualUL(s) <
InterfFQSS(s). Where, AvRxQualUL(s) is the average uplink bit
error rate (MEAN_BEP), and InterfFQSS(s) is the bit error rate
threshold FQSS calculated by AvRxLevUL(s).
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
nc2UlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
2-1859
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.37.42 P of downlink interference decision in NC2

Full Name
P of downlink interference decision in NC2
Abbreviated Name
nc2DlLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the P value of downlink interference

decision. Downlink interference is made if more than P values out
of N AvRxQualDL values satisfy the inequality AvRxQualDL(s) <
InterfFQSS(s). Where, AvRxQualDL(s) is the average downlink
bit error rate (MEAN_BEP), and InterfFQSS(s) is the bit error rate
threshold FQSS calculated by AvRxLevDL(s), that is, C value.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
nc2DlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
2-1860
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.43 N of downlink interference decision in NC2

Full Name
N of downlink interference decision in NC2
Abbreviated Name
nc2DlLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the N value of downlink interference

decision. Downlink interference is made if more than P values out
of N AvRxQualDL values satisfy the inequality AvRxQualDL(s) <
InterfFQSS(s). Where, AvRxQualDL(s) is the average downlink
bit error rate (MEAN_BEP), and InterfFQSS(s) is the bit error rate
threshold FQSS calculated by AvRxLevDL(s), that is, C value.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
nc2DlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1861
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.44 NC2 uplink interference RxQual offset

Full Name
NC2 uplink interference RxQual offset
Abbreviated Name
qoffSetUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The reselection upon interference is triggered based on the following

formulas:
AvRxQualUL(s) < InterfFQSS(s) (1)
AvRxQualDL(s) < InterfFQSS(s) (2)
In formula (1), AvRxQualUL(s) is the average uplink bit error rate
(MEAN_BEP), and InterfFQSS(s) is the bit error rate threshold FQSS
calculated by AvRxLevUL(s). In formula (2), AvRxQualDL(s) is the
average downlink bit error rate (MEAN_BEP), and InterfFQSS(s) is
the bit error rate threshold FQSS calculated by AvRxLevDL(s), that
is, C value. Uplink interference is made if more than P values out
of N AvRxQualUL values satisfy formula (1). Downlink interference
2-1862
SJ-20140527134815-013|2015-03-10(R1.1)
is made if more than P values out of N AvRxQualDL values

satisfy formula (2). For uplink interference, FQSS is calculated in
accordance with formula (3).
In formula (3), XOffset and YOffset mean SOffSetUl and QOffSetUl.
Instance
Cell
Related FG
0: -8
1: -7
2: -6
3: -5
4: -4
5: -3
6: -2
7: -1
8: 0
9: 1
10: 2
11: 3
12: 4
13: 5
14: 6
15: 7
16: 8
Unit
N/A
Default Value
Related Parameters
nc2UlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
environment.
Change take effect
No
2-1863
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.45 NC2 uplink interference RxLev offset

Full Name
NC2 uplink interference RxLev offset
Abbreviated Name
soffSetUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

formulas:
is made if more than P values out of N AvRxQualDL values
satisfy formula (2). For uplink interference, FQSS is calculated in
In formula (3), XOffset and YOffset mean SOffSetUl and QOffSetUl.
Instance
Cell
Related FG
2-1864
SJ-20140527134815-013|2015-03-10(R1.1)
0: -10 dB
1: -9 dB
2: -8 dB
3: -7 dB
4: -6 dB
5: -5 dB
6: -4 dB
7: -3 dB
8: -2 dB
9: -1 dB
10: 0 dB
11: 1 dB
12: 2 dB
13: 3 dB
14: 4 dB
15: 5 dB
16: 6 dB
17: 7 dB
18: 8 dB
19: 9 dB
20: 10 dB
Unit
dB
Default Value
10
Related Parameters
nc2UlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
environment.
Change take effect
No
2-1865
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.46 NC2 downlink interference RxQual offset

Full Name
NC2 downlink interference RxQual offset
Abbreviated Name
qoffSetDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

formulas:
is made if more than P values out of N AvRxQualDL values satisfy
formula (2). For downlink interference, FQSS is calculated in
In formula (4), XOffset and YOffset mean SOffSetDl and QOffSetDl.
Instance
Cell
Related FG
2-1866
SJ-20140527134815-013|2015-03-10(R1.1)
0: -8
1: -7
2: -6
3: -5
4: -4
5: -3
6: -2
7: -1
8: 0
9: 1
10: 2
11: 3
12: 4
13: 5
14: 6
15: 7
16: 8
Unit
N/A
Default Value
Related Parameters
nc2DlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
environment.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
2-1867
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.37.47 NC2 downlink interference RxLev offset

Full Name
NC2 downlink interference RxLev offset
Abbreviated Name
soffSetDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

formulas:
is made if more than P values out of N AvRxQualDL values satisfy
formula (2). For downlink interference, FQSS is calculated in
In formula (4), XOffset and YOffset mean SOffSetDl and QOffSetDl.
Instance
Cell
Related FG
0: -10 dB
1: -9 dB
2: -8 dB
3: -7 dB
4: -6 dB
5: -5 dB
6: -4 dB
7: -3 dB
8: -2 dB
9: -1 dB
10: 0 dB
2-1868
SJ-20140527134815-013|2015-03-10(R1.1)
11: 1 dB
12: 2 dB
13: 3 dB
14: 4 dB
15: 5 dB
16: 6 dB
17: 7 dB
18: 8 dB
19: 9 dB
20: 10 dB
Unit
dB
Default Value
10
Related Parameters
nc2DlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
environment.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-1869
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.48 Num of samples that calculates average of uplink signal

level in NC2
Full Name
Num of samples that calculates average of uplink signal level in NC2
Abbreviated Name
nc2UlLevWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of samples used to calculate

the average value of uplink signal strength.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
12
Related Parameters
nc2UlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
making reselection decisions is too small and the decisions are not
accurate.
If the parameter value is too large, the time for making a reselection
Reason
ensure the accuracy of reselection decisions. On the other hand,

to avoid call drops, reselection should be performed as early as
Change take effect
No
0
2-1870
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.49 Num of samples that calculates average of downlink signal

level in NC2
Full Name
Num of samples that calculates average of downlink signal level

in NC2
Abbreviated Name
nc2DlLevWidow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

the average value of downlink signal strength.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
nc2UlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1871
SJ-20140527134815-013|2015-03-10(R1.1)
accurate.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.50 Num of samples that calculates average of uplink quality

level in NC2
Full Name
Num of samples that calculates average of uplink quality level in

NC2
Abbreviated Name
nc2UlQualWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

the average value of uplink signal quality.
Instance
Cell
Related FG
1..31
2-1872
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
12
Related Parameters
nc2DlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.51 Num of samples that calculates average of downlink quality

level in NC2
Full Name
Num of samples that calculates average of downlink quality level

in NC2
Abbreviated Name
nc2DlQualWindow
2-1873
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

the average value of downlink signal quality.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
nc2DlInterControl
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

Configuration
2-1874
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.37.52 NC2 mode between 2G and 3G

Full Name
NC2 mode between 2G and 3G
Abbreviated Name
NC2For23G
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to enable the NC2 function

between 2G and 3G. The value 0 indicates that the NC2 function
is not enabled for interoperation between 2G and 3G. The value 1
indicates that the NC2 function is enabled between 2G and 3G. For
the reselection mode applied between 2G and 3G, perform an OR
operation according to this functional switch and the NC2 functional
switch of CtrlOrder. That is, when CtrlOrder is set to NC2, the NC2
mode is applied to 2G-2G and 2G-3G. When CtrlOrder is set to NC0
and NC2For23G is set to 1, the NC0 mode is applied to 2G-2G
and the NC2 mode is applied to 2G-3G. This functional switch is a
subset of CtrlOrder.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the parameter value is too large, the time for making a handover
2-1875
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.53 Serving Cell Load Threshold

Full Name
Serving Cell Load Threshold
Abbreviated Name
ServCellLoadThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates that the system triggers reselection for

network control when the load of a 2G serving cell exceeds a certain
threshold. The load is calculated based on channel usage.
Instance
Cell
Related FG
0..100
Unit
Default Value
70
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1876
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter should be configured in accordance with the network
planning.
This parameter is set based on experience.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.54 Serving Cell Capacity Threshold

Full Name
Serving Cell Capacity Threshold
Abbreviated Name
ServCellCapaThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates that the system triggers reselection for

network control when the remaining access capacity of a 2G cell is
lower than a certain threshold. The remaining access capacity is the
part left after the used capacity is subtracted from the total capacity.
Instance
Cell
Related FG
1..100
Unit
Default Value
30
2-1877
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be configured in accordance with the network
planning.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.55 Cell reselection control switch by serving cell traffic busy

Full Name
Cell reselection control switch by serving cell traffic busy
Abbreviated Name
PsTrafResel
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to enable reselection for the PS

service of a cell. When this function is enabled, the system triggers
reselection for network control if the load of this cell exceeds the
2G threshold. If this function is not enabled, the system does not
reference the load of this cell. 0: not enabled; 1: enabled
2-1878
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is enabled when reselection is triggered based on
the 2G serving cell congestion.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.37.56 Is Dual-Frequency NC2 Support

Full Name
Is Dual-Frequency NC2 Support
Abbreviated Name
DualFreqNC2Sup
Managed Object
3GPP Name
N/A
2-1879
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter determines whether the network controlled cell

reselection (NC2) based on load is enabled in a dual-frequency
network.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The load-based network controlled cell reselection is independent of
the other types of decision triggered by conditions. The following

describes the procedure for making a cell reselection decision in the
dual-frequency network:
The neighbor cell parameter ISDUALFREQRLTCELL is configured
for two cells to set a pair of NC2 associated cells in the
dual-frequency network. There are three constraints for the
configuration of associated cells: 1. Only one pair of associated
cells can be configured. 2. Both cells must be configured as the
associated cell of the other. 3. Two associated cells must be
managed by the same module. When the uplink or downlink traffic in
the serving cell A reaches the threshold specified by the parameter
DualCellPsChanThr of cell A, and the traffic in the NC2 associated
cell B is lower than the threshold specified by the parameter
DualCellPsChanThr of cell B, cell reselection to the associated cell
B is triggered.
Reason
Change take effect
No
2-1880
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.57 Dual-Frequency NC2 Parameter N

Full Name
Dual-Frequency NC2 Parameter N
Abbreviated Name
DualFreqNC2N
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of N used for making

a network-controlled cell selection (NC2) decision in the
dual-frequency network in accordance with level, quality, and TA.
Instance
Cell
Related FG
1..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1881
SJ-20140527134815-013|2015-03-10(R1.1)
A large N value can prevent the influence of signal fluctuation but
may cause a delay of decision making.

A small N value allows quick decision of cell reselection but the
decision may be incorrect.
Note: This parameter is newly added in iBSC V6.20.713. There is
no practical experience about this parameter.
This default value is set to ensure correct and quick network
Reason
controlled cell selection decisions.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.58 Dual-Frequency NC2 Parameter P

Full Name
Dual-Frequency NC2 Parameter P
Abbreviated Name
DualFreqNC2P
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of P used for making

a network-controlled cell selection (NC2) decision in the
dual-frequency network in accordance with level, quality, and TA.
Instance
Cell
Related FG
1..10
Unit
N/A
Default Value
2-1882
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A large N value can prevent the influence of signal fluctuation but
may cause a delay of decision making.

A small N value allows quick decision of cell reselection but the
decision may be incorrect.
This default value is set to ensure correct and quick network
Reason
controlled cell selection decisions.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.59 Dual-Frequency NC2 TA Threshold

Full Name
Dual-Frequency NC2 TA Threshold
Abbreviated Name
DualFreqNC2TAThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1883
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the TA threshold for network-controlled

cell reselection (NC2) decision in a dual-frequency network. It is
used in the TA-based cell reselection algorithm. If the condition
AvDistance(s) DualFreqNC2TAThr is met, a TA-based cell
reselection decision is triggered. AvDistance(s) indicates the
average distance between the MS and the BSS.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
63
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A TA-based network-controlled cell reselection decision is triggered
when the TA of the serving cell is greater than this threshold.

A large value is recommended to prevent unnecessary
network-controlled cell reselection based on TA.
If the parameter is set to a small value, unnecessary TA-based
network-controlled cell reselection is more likely to be triggered and
even incorrect cell reselection is triggered.
The default value is set to ensure correct and effective cell
Reason
reselection decision.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
2-1884
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.37.60 Dual-Frequency NC2 load Threshold

Full Name
Dual-Frequency NC2 load Threshold
Abbreviated Name
DualCellPsChanThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold for load-based

network-controlled cell reselection (NC2) decision. The conditions
for triggering a load-based network-controlled cell reselection
decision include: the uplink or downlink load in the serving
cell (cell A) reaches the threshold specified by the parameter
DualCellPsChanThr of cell A, both the uplink and downlink load in
the dual-frequency network associated cell (cell B) is lower than the
threshold specified by the parameter DualCellPsChanThr of cell B,
and the level in cell B reaches the minimum access level (C1>0).
Load-based NC2 decisions in uplink and downlink are made
separately. The formula used for decision making is:
Uplink PS load for NC2 = 100 all occupied TBFs
Instance
Cell
Related FG
0..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1885
SJ-20140527134815-013|2015-03-10(R1.1)
If the parameter value is large, the BSC may fail to make a timely
load-based NC2 decision but the probability of unnecessary

load-based NC2 can be reduced.
If the parameter value is small, the BSC may make a load-based
NC2 decision too early and the probability of unnecessary
load-based NC2 is increased.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.61 NC2 UL RxLevel Threshold

Full Name
NC2 UL RxLevel Threshold
Abbreviated Name
ULRxLevThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink level threshold for

network-controlled cell reselection (NC2) decision based on uplink
level. It is used in the reselection algorithm based on uplink level. If
the condition AvRxLevDL(s)>DLRxLevThr is met, a cell reselection
decision is triggered. AvRxLevDL(s) is the average uplink level in
the serving cell.
Instance
Cell
2-1886
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dbm
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A network-controlled cell reselection decision is triggered when the
uplink level in the serving cell is lower than this threshold.

A small value is recommended to prevent unnecessary
network-controlled cell reselection based on uplink level.
If the parameter is set to a large value, unnecessary
network-controlled cell reselection is more likely to be triggered and
even incorrect cell reselection is triggered.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.62 NC2 DL RxLevel Threshold

Full Name
NC2 DL RxLevel Threshold

2-1887
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
DLRxLevThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the NC2 downlink level decision threshold.

If AvRxLevDL(s) is greater than DLRxLevThr, then the condition for
a downlink level reselection decision is met. AvRxLevDL(s) is the
average downlink level of the serving cell.
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dbm
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The downlink level-based network control cell reselection judgment
is triggered when the downlink level of the serving cell falls below
this threshold.
The threshold value, if too small, can prevent unnecessary downlink
level-based network control cell reselections.
The threshold value, if too big, can lead to unnecessary downlink
level-based network control cell reselections, that is, reselections
by mistake.
This parameter ensures that the reselection can be implemented
Reason
accurately and efficiently.
Change take effect
No
2-1888
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.63 NC2 UL RxQual Threshold

Full Name
NC2 UL RxQual Threshold
Abbreviated Name
ULRxQualThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the NC2 uplink quality decision threshold.

It is used in uplink-quality-based reselection algorithms. If
AvRxQualUL(s) is greater than ULQualThr, then the condition for an
uplink level reselection decision is met. AvQualUL(s) is the average
uplink error bit rate of the serving cell.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1889
SJ-20140527134815-013|2015-03-10(R1.1)
The uplink quality-based network control cell reselection judgment
is triggered when the uplink MEAN_BEP of the serving cell falls

below this threshold.
The threshold value, if too small, can prevent unnecessary uplink
quality-based reselections.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.64 NC2 DL RxQual Threshold

Full Name
NC2 DL RxQual Threshold
Abbreviated Name
DLRxQualThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the NC2 downlink quality decision

threshold. It is used in downlink-quality-based reselection
algorithms.If AvRxQualDL(s) is lower than DLQualThr, then
the condition for a downlink quality reselection decision is met.
AvQualDL(s) is the average downlink error bit rate of the serving cell.
Instance
Cell
Related FG
0..31
Unit
N/A
2-1890
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The downlink quality-based network control cell reselection
judgment is triggered when the downlink MEAN_BEP of the serving

cell falls below this threshold.
The threshold value, if too small, can prevent unnecessary downlink
quality-based reselections.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.65 NC2 Distance Windows

Full Name
NC2 Distance Windows
Abbreviated Name
NC2DistanceWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the window size of NC2 based on TA.

2-1891
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

to hysteresis.
that is, judgments will be done quickly, but this may easily lead to
wrong judgments.
This is a function to balance between judgment efficiency and
Reason
elimination of fluctuation effect.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2-1892
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.66 Uplink RxLev Criteria

Full Name
Uplink RxLev Criteria
Abbreviated Name
NC2RxLevULCriteria
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the selection switch for the uplink level
criteria-based reselection. It is to be turned On if the uplink level
should be considered in the reselection judgment.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This switch should be turned On if the uplink level is considered in
making a reselection judgment. If many other considerations are

involved, also enable other switches to make a comprehensive
judgment.
Reason
Change take effect
No
Access
Read/Write
2-1893
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.67 Downlink RxLev Criteria

Full Name
Downlink RxLev Criteria
Abbreviated Name
NC2RxlevDLCriteria
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the selection switch for the downlink level
criteria-based reselection. It is to be turned On if the downlink level
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This switch should be turned On if the downlink level is considered
in making a reselection judgment. If many other considerations are

judgment.
2-1894
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.68 Uplink RxQual Criteria

Full Name
Uplink RxQual Criteria
Abbreviated Name
NC2RxQualULCriteria
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the selection switch for the uplink quality
criteria-based reselection. It is to be turned On if the uplink quality
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1895
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
This switch should be turned On if the uplink quality is considered

judgment.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.69 Downlink RxQual Criteria

Full Name
Downlink RxQual Criteria
Abbreviated Name
NC2RxQualDLCriteria
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the selection switch for the downlink quality
criteria-based reselection. It is to be turned On if the downlink quality
Instance
Cell
Related FG
0: No
1: Yes
2-1896
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This switch should be turned On if the downlink quality is considered

judgment.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.70 PBGT Criteria

Full Name
PBGT Criteria
Abbreviated Name
PBGTCriteria
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1897
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the selection switch for the PBGT

criteria-based reselection. It is to be turned On if the PBGT criteria
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This switch should be turned On if the PBGT is considered in making
a reselection judgment. If many other considerations are involved,

also enable other switches to make a comprehensive judgment.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.71 Distance Criteria

Full Name
Distance Criteria
2-1898
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
DistanceCriteria
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the selection switch for the distance

criteria-based reselection. It is to be turned On if the distance criteria
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This switch should be turned On if the distance is considered in
making a reselection judgment. If many other considerations are

judgment.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
2-1899
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.37.72 Cell change failure penalty time

Full Name
Cell change failure penalty time
Abbreviated Name
TCellChangeFailPenal
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When cell reselection fails, a penalty is made for the whole target
cell with the failure cause of cell congestion. During the penalty
period, MSs are forbidden to use the target cell. If the failure is not
caused by cell congestion, a neighbor cell penalty is made during
the penalty period according to the failure times and penalty offset.
Instance
Cell
Related FG
1..100
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is small, impact caused by reselection failure is also little
and the reselection will be very sensitive to wireless quality changes.
To be set as in normal cases.
Reason
Change take effect
No
2-1900
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.73 cell change failure penalty level offset

Full Name
cell change failure penalty level offset
Abbreviated Name
PenalLevOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the target cell fails to be reselected and makes another

attempt, the penalty offset "PenalLevOffset" is deducted during
PBGT calculation if the cell priorities are the same. If the cell is still
ranked first, another attempt is made.When an offset penalty is made
for the target cell and meanwhile the "NTCellChangeFailPenal"
counter is enabled and set to 1, the counter increases by 1 and the
offset level increases by the value of "PenalLevOffset" in case of
another failure. When the failure times reach the maximum value 3
but the cell is in the penalty period ("TcellChangeFailPenal"), the cell
is filtered and no attempt is made to the cell.
Instance
Cell
Related FG
0..63
Unit
dBm
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1901
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
If the value is big, impact caused by reselection failure is also great
and it is very difficult to make a reselection.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.74 invalid reassign time

Full Name
invalid reassign time
Abbreviated Name
TInvalidIReassign
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Penalty for intra-cell resource changes caused by interference:

When intra-cell interference occurs for the first time after timeslots
are reassigned, the MS enables the TInvalidIReassign timer.
If timeslot reassignment reoccurs before the timer times out, it
indicates that the previous timeslot reassignment does not improve
the interference. The NInvalidIReassign timer increases by 1 and
meanwhile the MS enables the TInvalidIReassign timer. If timeslot
reassignment reoccurs after the timer times out, it indicates that the
previous time reassignment is valid. The NInvalidIReassign timer
is reset to 0 and meanwhile the MS enables the TInvalidIReassign
timer. If the NInvalidIReassign timer reaches the value of
"NMaxInvalidIReassign", it is unnecessary to improve interference
2-1902
SJ-20140527134815-013|2015-03-10(R1.1)
by timeslot reassignment. In this case, cell reselection should be

made.
Instance
Cell
Related FG
0..31
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger this value is, the more probable the resource adjustment
will happen before the timer expires and more probable the invalid
adjustment reaches the maximum attempts, and thus the adjustment
caused by interference is more easily be deemed as invalid and in
turn the cell reselection process gets started. The smaller this value
is, the less probable the resource adjustment will happen before the
timer expires and thus the adjustment caused by interference is
more easily be deemed as valid and in turn it's less easily to initiate
the cell reselection process. The interference trigger period should
be calculated according to the interference judgment N and P
values. This parameter should be set according to both interference
trigger period and maximum attempts of invalid adjustment.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2-1903
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.75 invalid reassign maximum times

Full Name
invalid reassign maximum times
Abbreviated Name
NMaxInvalidIReassign
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Penalty for intra-cell resource changes caused by interference:

When intra-cell interference occurs for the first time after timeslots
are reassigned, the MS enables the TInvalidIReassign timer.
If timeslot reassignment reoccurs before the timer times out, it
indicates that the previous timeslot reassignment does not improve
the interference. The NInvalidIReassign timer increases by 1 and
meanwhile the MS enables the TInvalidIReassign timer. If timeslot
reassignment reoccurs after the timer times out, it indicates that the
previous time reassignment is valid. The NInvalidIReassign timer
is reset to 0 and meanwhile the MS enables the TInvalidIReassign
timer. If the NInvalidIReassign timer reaches the value of
"NMaxInvalidIReassign", it is unnecessary to improve interference
by timeslot reassignment. In this case, cell reselection should be
made.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Within the invalid period, it's more difficult to make cell reselection if
the maximum invalid adjustment is set to a larger value.
2-1904
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.76 Traffic cell change threshold

Full Name
Traffic cell change threshold
Abbreviated Name
TrafficThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the traffic reselection switch of the serving cell is On and

its load reaches the value of this parameter, the system triggers
reselection from this cell to other cells.
Instance
Cell
Related FG
0..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1905
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter can be used to control the cell load. Lower this
parameter a bit if the cell load is not expected to be too high.
The load of a serving cell should not be too high.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.77 Uplink RxLev N Value

Full Name
Uplink RxLev N Value
Abbreviated Name
ULRxLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers uplink level reselection when P out of N

measured uplink levels meets the uplink level threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
2-1906
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is small, the measurement report judgment will be made
promptly and the reselection is sensitive and transient fluctuation

has great impact.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.78 Uplink RxLev P Value

Full Name
Uplink RxLev P Value
Abbreviated Name
ULRxLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers uplink level reselection when P out of N

measured uplink levels meets the uplink level threshold.
Instance
Cell
Related FG
2-1907
SJ-20140527134815-013|2015-03-10(R1.1)
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

has great impact.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.79 Downlink RxLev N Value

Full Name
Downlink RxLev N Value
Abbreviated Name
DLRxLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1908
SJ-20140527134815-013|2015-03-10(R1.1)
Description
The system triggers downlink level reselection when P out of N

measured downlink levels meets the downlink level threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

has great impact.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.80 Downlink RxLev P Value

Full Name
Downlink RxLev P Value
Abbreviated Name
DLRxLevP
2-1909
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers downlink level reselection when P out of N

measured downlink levels meets the downlink level threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

has great impact.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2-1910
SJ-20140527134815-013|2015-03-10(R1.1)
2.37.81 Uplink RxQual N Value

Full Name
Uplink RxQual N Value
Abbreviated Name
ULRxQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers uplink quality reselection when P out of N

measured uplink quality values meets the uplink quality threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

has great impact.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
2-1911
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.101/V6.30.101
N/A
2.37.82 Uplink RxQual P Value

Full Name
Uplink RxQual P Value
Abbreviated Name
ULRxQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers uplink quality reselection when P out of N

measured uplink quality values meets the uplink quality threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

has great impact.
Reason
Change take effect
No
0
2-1912
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.83 Downlink RxQual N Value

Full Name
Downlink RxQual N Value
Abbreviated Name
DLRxQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers downlink quality reselection when P out of

N measured downlink quality values meets the downlink quality
threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

has great impact.
Reason
2-1913
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.84 Downlink RxQual P Value

Full Name
Downlink RxQual P Value
Abbreviated Name
DLRxQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers downlink quality reselection when P out of

N measured downlink quality values meets the downlink quality
threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1914
SJ-20140527134815-013|2015-03-10(R1.1)

has great impact.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.85 Distance N Value

Full Name
Distance N Value
Abbreviated Name
DistanceN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers distance reselection when P out of N measured

distances meets the distance threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1915
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

has great impact.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.86 Distance P Value

Full Name
Distance P Value
Abbreviated Name
DistanceP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers distance reselection when P out of N measured

distances meets the distance threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
2-1916
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

has great impact.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.87 PBGT N Value

Full Name
PBGT N Value
Abbreviated Name
PBGTN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers PBGT reselection when P out of continuous N

measured PBGT values meets the PBGT threshold.
2-1917
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

has great impact.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.88 PBGT P Value

Full Name
PBGT P Value
Abbreviated Name
PBGTP
Managed Object
2-1918
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
The system triggers PBGT reselection when P out of continuous N

measured PBGT values meets the PBGT threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

has great impact.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.89 Indication for sending PNCD before NC2 PCCO

2-1919
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Indication for sending PNCD before NC2 PCCO
Abbreviated Name
NC2PNCDSendInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
In NC2 mode, this parameter determines whether to send a system

message of the target cell to the MS before sending the "Packet cell
change order" message.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be modified to Yes to speed up the access to a
new cell in the NC2 mode.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
2-1920
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.37.90 cell reselection by traffic

Full Name
cell reselection by traffic
Abbreviated Name
CellReselByTraffic
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the switch for traffic-based cell reselection. If it is

turned On, then candidate cells are put in an order from low to high
traffic and the one with the lowest traffic will serve as the target cell.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-1921
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.37.91 Support GSM to LTE NC2

Full Name
Support GSM to LTE NC2
Abbreviated Name
GSMLTENC2Sup
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether network-controlled cell reselection

from GSM to LTE is supported. This feature can be used with
network-controlled cell reselection between 2G cells, but cannot be
used with network-controlled cell reselection between 2/3G cells.
Instance
Cell
Related FG
ZGO-02-03-017 Cell Reselection to LTE with NCCR
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In a GSM/LTE mixed network, if load balancing between GSM and
LTE is enabled, this feature is enabled to reduce GSM load.

2-1922
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.38 DTM Configuration(GDTM)

2.38.1 DTM Configuration ID
Full Name
DTM Configuration ID
Abbreviated Name
GDTMId
Managed Object
DTM Configuration(GDTM)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a DTM configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1923
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->GPRS Configuration->DTM
Configuration
N/A
2.38.2 DTM support

Full Name
DTM support
Abbreviated Name
DTMSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a cell supports the Dual Transfer

Mode (DTM). This parameter is broadcast to MSs through the
GPRS Cell options in SI13 and PSI13. If the DTM is supported,
category-A MSs are allowed to initialize a packet request procedure
in dedicated mode.
Instance
Cell
Related FG
0: Not Support
1: Support
2-1924
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
GttpLapdmNum
GttpLapdmNum takes effect afer DTMSupport is enabled.
Parameters
If the number of common TRXs in the extended cell

(GGsmCell.cellType==4)) is 0 (GTrx.trxType==0), the DTM cannot
be enabled in this cell.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The DTM can be enabled as needed on condition that the CN
supports Common ID. The DTM supports concurrent services and

improves user experience.
This switch is disabled by default.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

Configuration
V6.50.202/V6.30.202
ADD
2.38.3 Support enhanced DTM capability

Full Name
Support enhanced DTM capability
Abbreviated Name
DTMEnhanceCapa
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1925
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether the cell supports DTM enhanced

capability. If yes, 1, The MS enters the DTM transmission state
without releasing PS when it receives a paging request from CS.
2, The MS enters the Packet Transfer state without releasing PS
resources when CS is released in DTM.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
DTMEnhanceCap
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter should be set in accordance with the DTM settings
and this version.
This function is not provided in this version.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

Configuration
N/A
2.38.4 Max number of GTTP lapdm frame

2-1926
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Max number of GTTP lapdm frame
Abbreviated Name
gttpLapdmNum
Managed Object
3GPP Name
MAX_LAPDm
3GPP Reference
N/A
Description
This parameter indicates the maximum number of GTTP Lapdm

frames. It specifies the maximum number of Lapdm frames of
GPRS signaling message transmitted on the main DCCH. If the MS
is in the dedicated mode, and it and network side support DTM, the
MS or network side needs to transparently transmit the upper layer
information at the Um interface, the GPRS transparent procedure is
used on the main DCCH when: 1, the information to be transmitted
is GPRS signaling; 2, the length of the GTTP message is smaller
than the parameter value.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
DTMSupport
GttpLapdmNum takes effect after DTMSupport is enabled.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater the parameter value is, the greater the GPRS signaling
length that can be carried is, and the greater the influence on the
LAPDm channel is. It is not recommended to set this parameter to a
larger value because the GPRS signaling length is normally short.
Otherwise, the user perception in voice services will be affected
slightly. If the maximum number of GTTP Lapdm frames cannot be
reached, the TBF transmission is established in dedicated mode.
The default value is set to 3, which can meet the requirements for
Reason
general GMM signaling transfer, for example RAU and ATTACH.
Change take effect
2-1927
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.39 PS Power Control(GPsPowerControl)

2.39.1 PS Power Control ID
Full Name
PS Power Control ID
Abbreviated Name
GPsPowerControlId
Managed Object
PS Power Control(GPsPowerControl)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a PS power control ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1928
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->GPRS Configuration->PS Power Control
N/A
2.39.2 Uplink power control strategy

Full Name
Uplink power control strategy
Abbreviated Name
ulPwCtrl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the uplink power control policy of GPRS,

including four modes: No control, open-loop control, close-loop
control, and control based on quality.
Instance
Cell
Related FG
0: No control
1: Open-loop control
2: Close-loop control
3: Control based on quality
Unit
N/A
Default Value
Related Parameters
N/A
2-1929
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This version just supports the open-loop power control function. If
the uplink open-loop power control function needs to be enabled on

the site, this parameter is set to 1. After the function is enabled, the
uplink intranet interference can be reduced.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.3 Downlink power control strategy

Full Name
Downlink power control strategy
Abbreviated Name
dlPwCtrl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the downlink power control policy of GPRS,

including four modes: No control, open-loop control, close-loop
control, and control based on quality.
Instance
Cell
Related FG

2-1930
SJ-20140527134815-013|2015-03-10(R1.1)
0: No control
1: Open-loop control
2: Close-loop control
3: Control based on quality
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.4 Expected signal intensity of MS

Full Name
Expected signal intensity of MS
Abbreviated Name
ss_bts
Managed Object
3GPP Name
SSb
2-1931
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter is used for the uplink open loop power control.
SSb = P - L = T0 - CH - PBTS - 48
Where,
PBTS = BTS maximum output power
P = MS output power
L = path loss
TCH is an MS and channel specific power control parameter, sent to
MSs in an RLC control message.
G T0 = 39 dBm for GSM 400, GSM 700, GSM 850 and GSM900
= 36 dBm for DCS1 800 and PCS 1900
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
40
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The parameter can be set to a smaller value if it is necessary to
reduce the MS transmit power and interference from the PS service.
If the signal strength received by the MS is close to -70 dBm, it
Reason
ensures PS services are normal.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1932
SJ-20140527134815-013|2015-03-10(R1.1)
2.39.5 Downlink Power Control Mode

Full Name
Downlink Power Control Mode
Abbreviated Name
pwCtrlMode
Managed Object
3GPP Name
BTS_PWR_CTRL_MODE
3GPP Reference
N/A
Description
This parameter sets the BTS downlink power control mode. BTS
has two power control modes: A and B. In PR mode A, the power
of each radio block on the channel is calculated in accordance with
the MS to which the block belongs. In PR mode B, the radio blocks
that belong to different MSs on the same channel use the same
transmission power.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
2-1933
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.39.6 Power Control Level

Full Name
Power Control Level
Abbreviated Name
pwCtrlLev
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the power control precision of GPRS, describing

the nominal output power and power control precision (dB) sent by
the MS at each power control level. This parameter is not used in
this version and does not need to be adjusted.
Instance
Cell
Related FG
N/A
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
be adjusted.
Reason
be adjusted.
Change take effect
2-1934
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.39.7 Power descending of PDCH to BCCH in a mode

Full Name
Power descending of PDCH to BCCH in a mode
Abbreviated Name
p0
Managed Object
3GPP Name
P0
3GPP Reference
N/A
Description
This parameter is an optional downlink power control parameter,

included in the PACKET UPLINK ASSIGNMENT and PACKET
DOWNPLINK ASSIGNMENT messages. If P0 is included in the
assignment, the downlink power control is used. Otherwise, the
downlink power control is not used. In packet transmission mode,
the P0 value is not allowed to be changed unless the reassignment
or a new assignment is established, and the assignment does not
include any PDCH(s) assigned previously.
Instance
Cell
Related FG
ZGO-03-02-008 EGPRS on BCCH-TRX Configurable
0..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1935
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
When the downlink power control switch is enabled, the greater
the P0 value is, the smaller the transmit power of the BTS is. The
smaller the P0 value is, the greater the transmit power of the BTS is.
This parameter is set based on the onsite conditions.
It is a functional parameter and the default value is 0.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.8 Power control parameter

Full Name
Power control parameter
Abbreviated Name
Alpha
Managed Object
3GPP Name
ALPHA
3GPP Reference
N/A
Description
This parameter is used by an MS. It is one of the global power

control and GPRS power control parameters, and broadcast to
MSs through the PSI1, PSI13 and SI13 messages. This parameter
determines the MS transmission power control parameter Alpha ().
Instance
Cell
Related FG
0..10
Unit
N/A
Default Value
6
2-1936
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To reduce the dependence of MS transmit power on the downlink
level, decrease the value of this power control parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.9 Filter period in the packet idle mode

Full Name
Filter period in the packet idle mode
Abbreviated Name
T_AVG_W
Managed Object
3GPP Name
T_AVG_W
3GPP Reference
N/A
Description

indicates a filtering period of signal strength for power control in
packet idle mode.
Instance
Cell
2-1937
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used for measuring the downlink signal strength
when an MS is in packet idle mode and calculating the C value. The

formula is Cn = (1-a) Cn-1 + a Cblock,n, of which a = 1/MIN(n,
MAX(5, TAVG_W NDRX)). For more information, refer to 45008
10.2.3.1.1. This parameter is not supported in this version, and the
default value is 0.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.10 Filter period in packet transmission mode

Full Name
Filter period in packet transmission mode
Abbreviated Name
T_AVG_T
Managed Object
2-1938
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
T_AVG_T
3GPP Reference
N/A
Description

indicates a filtering period of signal strength for power control in
packet transmission mode.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used for measuring the downlink signal strength
when an MS is in packet transmission mode and calculating the C

value. The formula is Cn = (1-b) Cn-1 + b SS n, of which b =
1/(6*TAVG_T). For more information, refer to 45008 10.2.3.1.2. This
parameter is not supported in this version, and the default value is 0.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1939
SJ-20140527134815-013|2015-03-10(R1.1)
2.39.11 Power control measurement channel

Full Name
Power control measurement channel
Abbreviated Name
PcMeasChan
Managed Object
3GPP Name
PC_MEAS_CHAN
3GPP Reference
N/A
Description

indicates the position where the downlink power strength is surveyed
for uplink power control.
Instance
Cell
Related FG
0: BCCH
1: PDCH
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value indicates the power on BCCH is measured.
The default value is set based on the general requirements.
Reason
Change take effect
No
Access
Read/Write
2-1940
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.39.12 Filter constant of power control

Full Name
Filter constant of power control
Abbreviated Name
N_AVG_I
Managed Object
3GPP Name
N_AVG_I
3GPP Reference
N/A
Description

control and GPRS power control parameters, and broadcast to MSs
through the PSI1, PSI13 and SI13 messages. This parameter is a
filter constant used to optimize the interference signal strength in
power control.
Instance
Cell
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used by an MS as a factor for calculating the
downlink signal strength. The default value is recommended. No

modification is needed.
Reason
2-1941
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.13 Max power reduction of CS1

Full Name
Max power reduction of CS1
Abbreviated Name
CodePwrDecLmt1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the maximum decreased power during power

control when the service encoding mode is CS1.
Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
26
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1942
SJ-20140527134815-013|2015-03-10(R1.1)
The greater the parameter value is, the easier it is to affect the
service quality. The smaller the parameter value is, the smaller the
power range is.
The maximum signal strength supported by the encoding mode
Reason
must be taken into consideration.
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
CodePwrDecLmt2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1943
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
CodePwrDecLmt3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
16
Related Parameters
N/A
2-1944
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
CodePwrDecLmt4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
2-1945
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
12
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.17 Max power reduction of MCS1

Full Name
Max power reduction of MCS1
Abbreviated Name
CodePwrDecLmt5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

control when the service encoding mode is MCS1.
2-1946
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
26
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
CodePwrDecLmt6
Managed Object
3GPP Name
N/A
2-1947
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
24
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
CodePwrDecLmt7
2-1948
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
22
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1949
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
CodePwrDecLmt8
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1950
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
CodePwrDecLmt9
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
18
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
Reason
Change take effect
No
Access
Read/Write
2-1951
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A

Full Name
Abbreviated Name
CodePwrDecLmt10
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
16
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
Reason
Change take effect
No
2-1952
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
CodePwrDecLmt11
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
14
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
2-1953
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
CodePwrDecLmt12
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
12
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1954
SJ-20140527134815-013|2015-03-10(R1.1)
power range is.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
CodePwrDecLmt13
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
0..40
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-1955
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
power range is.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.26 Window of averaging uplink signal

Full Name
Window of averaging uplink signal
Abbreviated Name
ulLevPSPwrMeaWnd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the number of samples used to calculate the

average uplink signal strength during uplink power control decision.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
10
Related Parameters
N/A
2-1956
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater the parameter value is, the better the result of filtering
measurement reports with sudden changes is, but the lower the
sensitivity in power control decision is. The smaller the parameter
value is, the higher the sensitivity in power control decision is, but
the lower the accuracy is.
Considering uplink measurement reports are submitted quickly, one
Reason
radio block is reported at a time.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.27 Window of averaging downlink signal

Full Name
Window of averaging downlink signal
Abbreviated Name
dlLevPSPwrMeaWnd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

average downlink signal strength during downlink power control
decision.
Instance
Cell
2-1957
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Considering downlink measurement reports are submitted slowly,
Reason
multiple radio blocks are reported at a time.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.28 Window of averaging uplink quality

Full Name
Window of averaging uplink quality
Abbreviated Name
ulQuaPSPwrMeaWnd
Managed Object
2-1958
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description

average uplink signal quality during uplink power control decision.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.29 Window of averaging downlink quality

2-1959
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Window of averaging downlink quality
Abbreviated Name
dlQuaPSPwrMeaWnd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

average downlink signal quality during downlink power control
decision.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1960
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.39.30 Threshold of uplink signal for increasing power

Full Name
Threshold of uplink signal for increasing power
Abbreviated Name
ulIncPSPwrThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink signal strength averages are lower than this
threshold during uplink power control decision, the system considers
this case as low level.
Instance
Cell
Related FG
20: -90
21: -89
22: -88
23: -87
24: -86
25: -85
26: -84
27: -83
28: -82
29: -81
30: -80
Unit
dBm
Default Value
22
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1961
SJ-20140527134815-013|2015-03-10(R1.1)
The greater the parameter value is, the easier it is to consider the
signal strength as a low level, and the higher the probability is that
the power control decision is to increase the level. The smaller the
parameter value is, the more difficult it is to consider the signal
strength as a low level, and the lower the probability is that the
power control decision is to increase the level.
The signal strength for normal operation of the PS service must be
Reason
taken into consideration.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.31 Threshold of downlink signal for increasing power

Full Name
Threshold of downlink signal for increasing power
Abbreviated Name
dlIncPSPwrThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N downlink signal strength averages are lower than

this threshold during downlink power control decision, the system
considers this case as low level.
Instance
Cell
Related FG
2-1962
SJ-20140527134815-013|2015-03-10(R1.1)
20: -90
21: -89
22: -88
23: -87
24: -86
25: -85
26: -84
27: -83
28: -82
29: -81
30: -80
Unit
dBm
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
signal strength as a low level, and the higher the probability is that
the power control decision is to increase the level. The smaller the
parameter value is, the more difficult it is to consider the signal
strength as a low level, and the lower the probability is that the
power control decision is to increase the level.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1963
SJ-20140527134815-013|2015-03-10(R1.1)
2.39.32 Threshold of uplink signal for decreasing power

Full Name
Threshold of uplink signal for decreasing power
Abbreviated Name
ulDecPSPwrThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink signal strength averages are higher than this
this case as high level.
Instance
Cell
Related FG
32: -78
33: -77
34: -76
35: -75
36: -74
37: -73
38: -72
39: -71
40: -70
41: -69
42: -68
43: -67
44: -66
45: -65
Unit
dBm
Default Value
36
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1964
SJ-20140527134815-013|2015-03-10(R1.1)
The smaller the parameter value is, the easier it is to consider the
signal strength as a high level, and the higher the probability is that
the power control decision is to decrease the level. The greater
the parameter value is, the more difficult it is to consider the signal
strength as a higher level, and the lower the probability is that the
power control decision is to decrease the level.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.33 Threshold of downlink signal for decreasing power

Full Name
Threshold of downlink signal for decreasing power
Abbreviated Name
dlDecPSPwrThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N downlink signal strength averages are higher than

considers this case as high level.
Instance
Cell
Related FG
2-1965
SJ-20140527134815-013|2015-03-10(R1.1)
32: -78
33: -77
34: -76
35: -75
36: -74
37: -73
38: -72
39: -71
40: -70
41: -69
42: -68
43: -67
44: -66
45: -65
Unit
dBm
Default Value
40
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
signal strength as a high level, and the higher the probability is that
the power control decision is to decrease the level. The greater
strength as a higher level, and the lower the probability is that the
power control decision is to decrease the level.
Reason
Change take effect
No
Access
Read/Write
OMC Access path


2-1966
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.39.34 Threshold of uplink MEAN_BEP for increasing power in

GPRS
Full Name
Threshold of uplink MEAN_BEP for increasing power in GPRS
Abbreviated Name
ulIncMeanBepGprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink MEAN_BEP averages are lower than this

this case as low quality.
Instance
Cell
Related FG
12..24
Unit
N/A
Default Value
18
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
signal quality as low quality, and the higher the probability is that
the power control decision is to increase the quality. The smaller
quality as low quality, and the lower the probability is that the power
control decision is to increase the quality.
The signal quality for normal operation of the PS service must be
Reason
Change take effect
2-1967
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.39.35 Threshold of uplink CV_BEP for increasing power in GPRS

Full Name
Threshold of uplink CV_BEP for increasing power in GPRS
Abbreviated Name
ulIncCvBepGprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink CV_BEP averages are lower than this

this case as low quality. This parameter is not used in this version.
Instance
Cell
Related FG
2..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1968
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.36 Threshold of downlink quality for increasing power in GPRS

Full Name
Threshold of downlink quality for increasing power in GPRS
Abbreviated Name
dlIncQuaGprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N downlink quality averages are higher than this

threshold during downlink power control decision of the GPRS
service, the system considers this case as low quality.
Instance
Cell
Related FG
2..5
Unit
N/A
Default Value
Related Parameters
N/A
2-1969
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
the power control decision is to increase the quality. The greater
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.37 Threshold of uplink MEAN_BEP for decreasing power in

GPRS
Full Name
Threshold of uplink MEAN_BEP for decreasing power in GPRS
Abbreviated Name
ulDecMeanBepGprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1970
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When P out of N uplink MEAN_BEP averages are higher than this

threshold during uplink power control decision of the GPRS service,
the system considers this case as high quality.
Instance
Cell
Related FG
27..30
Unit
N/A
Default Value
29
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
signal quality as high quality, and the higher the probability is that
the power control decision is to decrease the quality. The greater
quality as higher quality, and the lower the probability is that the
power control decision is to decrease the quality.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.38 Threshold of uplink CV_BEP for decreasing power in GPRS

2-1971
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Threshold of uplink CV_BEP for decreasing power in GPRS
Abbreviated Name
ulDecCvBepGprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink CV_BEP averages are higher than this

threshold and P out of N uplink MEAN_BEP averages are higher
than the corresponding MEAN_BEP threshold during uplink power
control decision of the GPRS service, the system considers this
case as high quality. This parameter is not used in this version.
Instance
Cell
Related FG
5..6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
2-1972
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.39.39 Threshold of downlink quality for decreasing power in

GPRS
Full Name
Threshold of downlink quality for decreasing power in GPRS
Abbreviated Name
dlDecQuaGprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N downlink quality averages are lower than this

service, the system considers this case as high quality.
Instance
Cell
Related FG
1..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
the power control decision is to decrease the quality. The smaller
2-1973
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.40 Threshold of uplink MEAN_BEP for increasing power in

EDGE
Full Name
Threshold of uplink MEAN_BEP for increasing power in EDGE
Abbreviated Name
ulIncMeanBepEgprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink MEAN_BEP averages are lower than this

threshold during uplink power control decision of the EDGE service,
the system considers this case as low quality.
Instance
Cell
Related FG
12..24
Unit
N/A
Default Value
18
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-1974
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.41 Threshold of uplink CV_BEP for increasing power in EDGE

Full Name
Threshold of uplink CV_BEP for increasing power in EDGE
Abbreviated Name
ulIncCvBepEgprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink CV_BEP averages are lower than this

the system considers this case as low quality. This parameter is
not used in this version.
Instance
Cell
Related FG
2..5
2-1975
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.42 Threshold of downlink MEAN_BEP for increasing power in

EDGE
Full Name
Threshold of downlink MEAN_BEP for increasing power in EDGE
Abbreviated Name
dlIncMeanBepEgprsThr
Managed Object
3GPP Name
N/A
2-1976
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

threshold during downlink power control decision of the EDGE
Instance
Cell
Related FG
12..24
Unit
N/A
Default Value
18
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1977
SJ-20140527134815-013|2015-03-10(R1.1)
2.39.43 Threshold of downlink CV_BEP for increasing power in

EDGE
Full Name
Threshold of downlink CV_BEP for increasing power in EDGE
Abbreviated Name
dlIncCvBepEgprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N downlink CV_BEP averages are lower than this

service, the system considers this case as high quality. This
parameter is not used in this version.
Instance
Cell
Related FG
2..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-1978
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.39.44 Threshold of uplink MEAN_BEP for decreasing power in

EDGE
Full Name
Threshold of uplink MEAN_BEP for decreasing power in EDGE
Abbreviated Name
ulDecMeanBepEgprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink MEAN_BEP averages are higher than this

Instance
Cell
Related FG
27..30
Unit
N/A
Default Value
29
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1979
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.45 Threshold of uplink CV_BEP for decreasing power in EDGE

Full Name
Threshold of uplink CV_BEP for decreasing power in EDGE
Abbreviated Name
ulDecCvBepEgprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink CV_BEP averages are higher than this

threshold and P out of N uplink MEAN_BEP averages are higher
than the corresponding MEAN_BEP threshold during uplink power
control decision of the EDGE service, the system considers this
case as high quality. This parameter is not used in this version.
Instance
Cell
Related FG
5..6
Unit
N/A
2-1980
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.46 Threshold of downlink MEAN_BEP for decreasing power in

EDGE
Full Name
Threshold of downlink MEAN_BEP for decreasing power in EDGE
Abbreviated Name
dlDecMeanBepEgprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1981
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When P out of N downlink MEAN_BEP averages are higher than

this threshold during downlink power control decision of the EDGE
Instance
Cell
Related FG
27..30
Unit
N/A
Default Value
29
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1982
SJ-20140527134815-013|2015-03-10(R1.1)
2.39.47 Threshold of downlink CV_BEP for decreasing power in

EDGE
Full Name
Threshold of downlink CV_BEP for decreasing power in EDGE
Abbreviated Name
dlDecCvBepEgprsThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N downlink CV_BEP averages are higher than this

threshold and P out of N downlink MEAN_BEP averages are higher
than the corresponding MEAN_BEP threshold during downlink
power control decision of the EDGE service, the system considers
this case as high quality. This parameter is not used in this version.
Instance
Cell
Related FG
5..6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-1983
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.39.48 N of uplink signal for increasing power

Full Name
N of uplink signal for increasing power
Abbreviated Name
ulIncPSPwrLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1984
SJ-20140527134815-013|2015-03-10(R1.1)
The greater the parameter value, the easier it is to meet the
requirements for power control decision, and the higher the

probability is that the power control decision is to increase the
value. The smaller the parameter value, the more difficult it is to
meet the requirements for power control decision, and the lower the
probability is that the power control decision is to increase the value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.49 N of downlink signal for increasing power

Full Name
N of downlink signal for increasing power
Abbreviated Name
dlIncPSPwrLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
2-1985
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.50 N of uplink signal for decreasing power

Full Name
N of uplink signal for decreasing power
Abbreviated Name
ulDecPSPwrLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
2-1986
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

probability is that the power control decision is to decrease the
probability is that the power control decision is to decrease the value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.51 N of downlink signal for decreasing power

Full Name
N of downlink signal for decreasing power
Abbreviated Name
dlIDecPSPwrLevN
Managed Object
2-1987
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-1988
SJ-20140527134815-013|2015-03-10(R1.1)
2.39.52 N of uplink quality for increasing power in GPRS

Full Name
N of uplink quality for increasing power in GPRS
Abbreviated Name
ulIncPSPwrGprsQuaN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink quality averages are lower than this

Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
2-1989
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.39.53 N of downlink quality for increasing power in GPRS

Full Name
N of downlink quality for increasing power in GPRS
Abbreviated Name
dlIncPSPwrGprsQuaN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-1990
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.54 N of uplink quality for decreasing power in GPRS

Full Name
N of uplink quality for decreasing power in GPRS
Abbreviated Name
ulDecPSPwrGprsQuaN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When P out of N uplink quality averages are higher than this

Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-1991
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.55 N of downlink quality for decreasing power in GPRS

Full Name
N of downlink quality for decreasing power in GPRS
Abbreviated Name
dlIDecPSPwrGprsQuaN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
4
2-1992
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.56 N of uplink quality for increasing power in EDGE

Full Name
N of uplink quality for increasing power in EDGE
Abbreviated Name
ulIncPSPwrEgprsQuaN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1993
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.57 N of downlink quality for increasing power in EDGE

2-1994
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
N of downlink quality for increasing power in EDGE
Abbreviated Name
dlIncPSPwrEgprsQuaN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-1995
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.39.58 N of uplink quality for decreasing power in EDGE

Full Name
N of uplink quality for decreasing power in EDGE
Abbreviated Name
ulDecPSPwrEgprsQuaN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value, the easier it is to meet the

value. The greater the parameter value, the more difficult it is to
Reason
Change take effect
2-1996
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.39.59 N of downlink quality for decreasing power in EDGE

Full Name
N of downlink quality for decreasing power in EDGE
Abbreviated Name
dlIDecPSPwrEgprsQuaN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1997
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.60 P of uplink signal for increasing power

Full Name
P of uplink signal for increasing power
Abbreviated Name
ulIncPSPwrLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
25
Related Parameters
N/A
2-1998
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.61 P of downlink signal for increasing power

Full Name
P of downlink signal for increasing power
Abbreviated Name
dlIncPSPwrLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

2-1999
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.62 P of uplink signal for decreasing power

Full Name
P of uplink signal for decreasing power
Abbreviated Name
ulDecPSPwrLevP
Managed Object
2-2000
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2001
SJ-20140527134815-013|2015-03-10(R1.1)
2.39.63 P of downlink signal for decreasing power

Full Name
P of downlink signal for decreasing power
Abbreviated Name
dlIDecPSPwrLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
2-2002
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.39.64 P of uplink quality for increasing power in GPRS

Full Name
P of uplink quality for increasing power in GPRS
Abbreviated Name
ulIncPSPwrGprsQuaP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2003
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.65 P of downlink quality for increasing power in GPRS

Full Name
P of downlink quality for increasing power in GPRS
Abbreviated Name
dlIncPSPwrGprsQuaP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2004
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.66 P of uplink quality for decreasing power in GPRS

Full Name
P of uplink quality for decreasing power in GPRS
Abbreviated Name
ulDecPSPwrGprsQuaP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
25
2-2005
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.67 P of downlink quality for decreasing power in GPRS

Full Name
P of downlink quality for decreasing power in GPRS
Abbreviated Name
dlIDecPSPwrGprsQuaP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2006
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.68 P of uplink quality for increasing power in EDGE

2-2007
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
P of uplink quality for increasing power in EDGE
Abbreviated Name
ulIncPSPwrEgprsQuaP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2008
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.39.69 P of downlink quality for increasing power in EDGE

Full Name
P of downlink quality for increasing power in EDGE
Abbreviated Name
dlIncPSPwrEgprsQuaP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
2-2009
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.39.70 P of uplink quality for decreasing power in EDGE

Full Name
P of uplink quality for decreasing power in EDGE
Abbreviated Name
ulDecPSPwrEgprsQuaP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
5..50
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2010
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.71 P of downlink quality for decreasing power in EDGE

Full Name
P of downlink quality for decreasing power in EDGE
Abbreviated Name
dlIDecPSPwrEgprsQuaP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
2..15
Unit
N/A
Default Value
Related Parameters
N/A
2-2011
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.72 Step of uplink power increase

Full Name
Step of uplink power increase
Abbreviated Name
ulIncPSPwrChgStep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the increased step of power during uplink

power control.
Instance
Cell
2-2012
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
2,4
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value is, the smaller the increase in
power is, and the smoother the adjustment is. The greater the
parameter value is, the bigger the increase in power is, the faster
the adjustment is, and the easier the oscillation is to occur.
To avoid oscillation, the power should not be adjusted too much.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.73 Step of uplink power decrease

Full Name
Step of uplink power decrease
Abbreviated Name
ulDecPSPwrChgStep
Managed Object
3GPP Name
N/A
2-2013
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter sets the decreased step of power during uplink

power control.
Instance
Cell
Related FG
2,4
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value is, the smaller the decrease in
parameter value is, the bigger the decrease in power is, the faster
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.74 Step of downlink power increase

Full Name
Step of downlink power increase
2-2014
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
dlIncPSPwrChgStep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the increased step of power during downlink

power control.
Instance
Cell
Related FG
1: 0.5dB
2: 1dB
3: 1.5dB
4: 2dB
5: 2.5dB
6: 3dB
7: 3.5dB
8: 4dB
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value is, the smaller the increase in
parameter value is, the bigger the increase in power is, the faster
Reason
Change take effect
No
Access
Read/Write
2-2015
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.39.75 Step of downlink power decrease

Full Name
Step of downlink power decrease
Abbreviated Name
dlDecPSPwrChgStep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the decreased step of power during downlink

power control.
Instance
Cell
Related FG
1: 0.5dB
2: 1dB
3: 1.5dB
4: 2dB
5: 2.5dB
6: 3dB
7: 3.5dB
8: 4dB
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2016
SJ-20140527134815-013|2015-03-10(R1.1)
The smaller the parameter value is, the smaller the decrease in
parameter value is, the bigger the decrease in power is, the faster
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.76 Mode of downlink closed loop power control

Full Name
Mode of downlink closed loop power control
Abbreviated Name
dlClosePwrCtrlMode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the downlink closed-loop power

control uses the velocity prior mode or power fall mode.
Instance
Cell
Related FG
0: velocity prior mode

1: power fall mode
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2017
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In velocity prior mode, the influence on user rate when the power is
decreased can be lowered, the conditions for power control decision

are strict, and the decrease in power is small. In power fall mode,
the transmit power of the base station is decreased, the conditions
for power control decision are loose, the decrease in power is big,
and user rate is decreased. This parameter should be set based on
the actual requirements.
The default value is set to try to lower the impact on speed when
Reason
the power is decreased.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.77 lowest CS of enabling downlink power control in GPRS

Full Name
lowest CS of enabling downlink power control in GPRS
Abbreviated Name
PSPwrCtrlGprsLowCS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
In the case of power fall mode for downlink PS power control,

this parameter sets the lowest encoding format allowed for power
control in GPRS mode.
Instance
Cell
2-2018
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
1: CS1
2: CS2
3: CS3
4: CS4
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter value is small, it indicates the downlink power
control can be performed in the low encoding format in the case of

GPRS, the power is very probably decreased greatly, and the rate
may be decreased markedly. If this parameter value is greater, it
indicates the downlink power control can be performed only in the
high encoding format in the case of GPRS, the power is probably
decreased slightly, and the rate is decreased slightly.
The default value is set to ensure that the power is decreased only
Reason
in good radio environment.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.78 lowest MCS of enabling downlink power control in EDGE

Full Name
lowest MCS of enabling downlink power control in EDGE

2-2019
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
PSPwrCtrlEgprsLowCS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
In the case of power fall mode for downlink PS power control,

this parameter sets the lowest encoding format allowed for power
control in EDGE mode.
Instance
Cell
Related FG
1: MCS1
2: MCS2
3: MCS3
4: MCS4
5: MCS5
6: MCS6
7: MCS7
8: MCS8
9: MCS9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter value is small, it indicates the downlink power
control can be performed in the low encoding format in the case of

EDGE, the power is very probably decreased greatly, and the rate
may be decreased markedly. If this parameter value is greater, it
indicates the downlink power control can be performed only in the
high encoding format in the case of EDGE, the power is probably
decreased slightly, and the rate is decreased slightly.
The default value is set to ensure that the power is decreased only
Reason
in good radio environment.
Change take effect
2-2020
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.39.79 try to decrease downlink power

Full Name
try to decrease downlink power
Abbreviated Name
TryDecDlPSPwr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
In the case of power decrease during downlink PS power control,

this parameter indicates whether to directly apply the power control
result to decease power without considering the auto-adaptive
judgment result.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2021
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is set based on the onsite requirements. To reduce
the power, set the parameter to Yes. To reduce power with the rate
taken into account, set the parameter to No.
The default value meets the requirement that much power can be
Reason
decreased in downlink power decease mode.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.80 reduced power of dummy usf in good uplink radio condition

Full Name
reduced power of dummy usf in good uplink radio condition
Abbreviated Name
DummyUsfPwr1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the deteriorated power of the downlink dummy

block with USF when the downlink power control is enabled and the
radio quality of the uplink TBF is good.
Instance
Cell
Related FG
2-2022
SJ-20140527134815-013|2015-03-10(R1.1)
0: 0
1: 0.5
2: 1
3: 1.5
4: 2
5: 2.5
6: 3
7: 3.5
8: 4
9: 4.5
10: 5
11: 5.5
12: 6
13: 6.5
14: 7
15: 7.5
16: 8
17: 8.5
18: 9
19: 9.5
20: 10
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
the power, set the parameter to a larger value. To reduce power with
the rate taken into account, set the parameter to a smaller value.
The default value meets the requirement for power decrease in
Reason
normal cases when the uplink signal quality is good.
Change take effect
No
2-2023
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.39.81 reduced power of dummy usf in general uplink radio

condition
Full Name
reduced power of dummy usf in general uplink radio condition
Abbreviated Name
DummyUsfPwr2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

radio quality of the uplink TBF is normal.
Instance
Cell
Related FG
0: 0
1: 0.5
2: 1
3: 1.5
4: 2
5: 2.5
6: 3
7: 3.5
8: 4
9: 4.5
10: 5
11: 5.5
12: 6
13: 6.5
14: 7
15: 7.5
16: 8
17: 8.5
2-2024
SJ-20140527134815-013|2015-03-10(R1.1)
18: 9
19: 9.5
20: 10
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
normal cases when the uplink signal quality is normal.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.39.82 reduced power of dummy usf in bad uplink radio condition

Full Name
reduced power of dummy usf in bad uplink radio condition
Abbreviated Name
DummyUsfPwr3
Managed Object
3GPP Name
N/A
2-2025
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

radio quality of the uplink TBF is poor.
Instance
Cell
Related FG
0: 0
1: 0.5
2: 1
3: 1.5
4: 2
5: 2.5
6: 3
7: 3.5
8: 4
9: 4.5
10: 5
11: 5.5
12: 6
13: 6.5
14: 7
15: 7.5
16: 8
17: 8.5
18: 9
19: 9.5
20: 10
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2026
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
normal cases when the uplink signal quality is poor.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.40 EDGE Configuration(GCellEdge)

2.40.1 EDGE Configuration ID
Full Name
EDGE Configuration ID
Abbreviated Name
GCellEdgeId
Managed Object
EDGE Configuration(GCellEdge)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an EDGE configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
2-2027
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Configuration
N/A
2.40.2 EGPRS packet channel request access program support

Full Name
EGPRS packet channel request access program support
Abbreviated Name
egprsPacketChReq
Managed Object
3GPP Name
EGPRS_PACKET_CHANNEL_REQUEST
3GPP Reference
N/A
Description
This parameter is broadcast to MSs through the GPRS Cell options

of SI13, PSI1 and PSI13, indicating whether the cell supports the
EGPRS_PACKET_CHANNEL_REQUEST access flow. If the cell
supports EGPRS and this flow, an EGPRS terminal can originate the
EGPRS packet access flow on RACH or PRACH (if PBCCH exists).
Instance
Cell
Related FG
ZGO-03-05-003 EGPRS Packet Channel Request on CCCH
0: Not Support
1: Support
Unit
N/A
2-2028
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is enabled when the network expects MSs use
one-phase access mode. The one-phase access flow will be

originated by an MS that supports EGPRS in the cell for which the
forcible two-phase access is not configured.
By default, the system uses one-phase access.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.40.3 Uplink LA+IR quality control support

Full Name
Uplink LA+IR quality control support
Abbreviated Name
irSupportUp
Managed Object
3GPP Name
RESEGMENT
3GPP Reference
N/A
2-2029
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether the cell supports the uplink IR

quality control. If yes, the network can set the RESEGMENT in
PACKET UPLINK ACK/NACK, PACKET UPLINK ASSIGNMENT
and PACK TIMESLOT RECONFIGURE message to FALSE to
inform the MS system of using IR quality control mode, and MS
uplink retransmission cannot be segmented.
Instance
Cell
Related FG

ZGO-03-05-006 Incremental Redundancy in UL
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the switch is enabled, the uplink throughput rate can be improved
in a poor wireless environment. MS uplink retransmission cannot be

segmented, but BTS memory will be occupied.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-2030
SJ-20140527134815-013|2015-03-10(R1.1)
2.40.4 Take Preemptive transmit bit function

Full Name
Take Preemptive transmit bit function
Abbreviated Name
preEmptiveTrans
Managed Object
3GPP Name
PRE_EMPTIVE_TRANSMISSION
3GPP Reference
N/A
Description
This parameter indicates whether the cell uses the preemptive

transmit bit function. If yes, the network indicates whether an MS
can send the RLC data of PENDING-ACK when there is no data in
NACK status and no new RLC data block to be transmitted or the
transmission window is full by the PRE_EMPTIVE_TRANSMISSION
field in the PACKET UPLINK ACK/NACK message.
Yes: Use preemptive transmission. The MS should not send the
data block in PENDING-ACK status. But the last block of the current
TBF should be transmitted, even if it is in PENDING-ACK status.
No: Do not use preemptive transmission. The MS should send the
oldest data block in PENDING-ACK status, then the second oldest
data block. If all data blocks in PENDING-ACK status are sent,
repeat the procedure.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-2031
SJ-20140527134815-013|2015-03-10(R1.1)
If the cell supports the function, the network indicates whether an
MS can send the RLC data of PENDING-ACK when there is no data

in NACK status and no new RLC data block to be transmitted or the
transmission window is full by the PRE_EMPTIVE_TRANSMISSION
field in the PACKET UPLINK ACK/NACK message. When the
function is enabled, the throughput capacity can be improved to a
certain extent.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.40.5 Average filter period for uplink BEP

Full Name
Average filter period for uplink BEP
Abbreviated Name
bepPeriodUp
Managed Object
3GPP Name
BEP_PERIOD
3GPP Reference
N/A
Description
This parameter is an internal parameter of PCU. It has the same

meaning as BEPPeriodDown, but it is to calculate the uplink
measurement data inside of PCU.
Instance
Cell
Related FG
0..15
Unit
N/A
2-2032
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter is set to a larger value, the weight of previous
measure report will be increased, and the calculated BEP is more

reliable. A positive impact will be made on relevant throughput
indicators.
If the parameter is set to a smaller value, the coding scheme can be
immediately adjusted in case of sudden change of radio conditions.
A sudden adjustment in the coding mode caused by the sudden
Reason
change in the uplink measurement report can be avoided by

increasing the weight of the previous measurement report
appropriately.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2.40.6 Average filter period for downlink BEP

Full Name
Average filter period for downlink BEP
Abbreviated Name
bepPeriodDown
Managed Object
2-2033
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
BEP_PERIOD
3GPP Reference
N/A
Description
This parameter is broadcast to MSs through the GPRS Cell options

of SI13, PSI1 and PSI13. In an EGPRS system, an EGPRS MS
determines whether to report the MEAN_REP_AV (average error
bit rate of the radio block) and CV_BEP_AV (variance coefficient of
radio block error bit rate) of the whole TBF, or the measurement
data per time slot MEAN_BEP_TNx (0-7) in accordance with the
network command.
The protocol defines the formula of the measurement data (refer to
Section 05.08 10.2.3.2.1). There is an oblivion factor e, whose value
is defined by the average period of BEP filter.
Instance
Cell
Related FG
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter is set to a larger value, the weight of previous
measure report will be increased, and the calculated BEP is more

reliable. A positive impact will be made on relevant throughput
indicators.
If the parameter is set to a smaller value, the coding scheme can be
immediately adjusted in case of sudden change of radio conditions.
The default value is set based on the protocol recommended value
Reason
and MS measure time.
Change take effect
No
Access
Read/Write
2-2034
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
N/A
2.40.7 EGPRS phone quality measure mode

Full Name
EGPRS phone quality measure mode
Abbreviated Name
linkQuaMeaMode
Managed Object
3GPP Name
LINK_QUALITY_MEASUREMENT_MODE
3GPP Reference
N/A
Description
This parameter sets the measurement report mode of an EGPRS MS

in the cell and is sent to the MS through the PACKET DOWNLINK
ASSIGNMENT or PACKET TIMESLOT RECONFIGURE message.
EGPRS measurement could be performed based on each impulse,
that is, measure by the granularity of BURST. The feature of rapid
EGPRS measurement makes the network side able to respond to
the change of radio environment quickly, so as to choose the most
proper coding mode and perform power control.
This parameter sets the measurement content in EGPRS Timeslot
Link Quality Measurements IE. The parameter values are as follows:
0: The MS reports MEAN-BEP rather than I_LEVEL in accordance
with the TBF.
1: The MS reports MEAN-BEP in accordance with the TBF, and
reports I_LEVEL obtained from slots 0 to 7.
2. The MS reports MEAN-BEP (rather than I_LEVEL) to which a
timeslot is allocated.
3. The MS reports MEAN-BEP to which a timeslot is allocated, and
reports I_LEVEL of which the number of timeslots is no more than 4.
Instance
Cell
Related FG
0..3
Unit
N/A
Default Value
2-2035
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
On the one hand, if modes 1, 2, and 3 are used, some terminals will
submit reports incorrectly or omit some reports, which affect the

dynamic adjustment of encoding format.
On the other hand, mode 0 is more reasonable. The recommended
value is 0, that is, submit reports in TBF mode.
The default value is set to TBF report mode.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.40.8 EGPRS uplink init. Coding scheme

Full Name
EGPRS uplink init. Coding scheme
Abbreviated Name
egprsCodecInitUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the EGPRS uplink initial coding scheme of a

cell.
2-2036
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
ZGO-03-05-001 Modulation and Coding Scheme #1~#9
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the wireless environment quality.
If the quality is good, the initial coding scheme can be improved

properly.
The default value MCS6 can meet the data transmission requirement
Reason
in normal radio conditions.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-2037
SJ-20140527134815-013|2015-03-10(R1.1)
2.40.9 EGPRS downlink init. Coding scheme

Full Name
EGPRS downlink init. Coding scheme
Abbreviated Name
egprsCodecInitDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the EGPRS downlink initial coding scheme

of a cell.
Instance
Cell
Related FG
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

properly.
The default value MCS6 can meet the data transmission requirement
Reason
in normal radio conditions.
Change take effect
No
2-2038
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
N/A
2.40.10 EGPRS uplink max. coding scheme

Full Name
EGPRS uplink max. coding scheme
Abbreviated Name
egprsCodecMaxUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the EGPRS uplink maximum coding scheme

of a cell.
Instance
Cell
Related FG
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2039
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No

properly.
The default value is set to MCS9, the maximum value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.40.11 EGPRS downlink max. coding scheme

Full Name
EGPRS downlink max. coding scheme
Abbreviated Name
egprsCodecMaxDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the EGPRS downlink maximum coding scheme

of a cell.
Instance
Cell
Related FG
2-2040
SJ-20140527134815-013|2015-03-10(R1.1)
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

properly.
The default value is set to MCS9, the maximum value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.40.12 edge Initial access rate

2-2041
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
edge Initial access rate
Abbreviated Name
EdgeIniAccRate
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter identifies the bandwidth occupied by service access

when the EDGE channel is activated.
Instance
Cell
Related FG
ZGO-03-01-002 Transmission Based CAC
1..122
Unit
kbps
Default Value
32
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher the initial access bandwidth, the higher the initial access
rate is. This parameter is set based on the wireless network quality
and bandwidth.
The default value is set based on the bandwidth of MCS6 at normal
Reason
rate.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-2042
SJ-20140527134815-013|2015-03-10(R1.1)
2.40.13 EGPRS phones init. Code can be changed

Full Name
EGPRS phones init. Code can be changed
Abbreviated Name
initAttachExchEgprs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the coding mode used by an

EGPRS MS in a cell can be dynamically changed. 0: the coding
mode cannot be dynamically changed.
1: the coding mode can be dynamically changed.
Instance
Cell
Related FG
1: Yes
0: No
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The recommended value is "Yes", which will improve the data
throughput.
The default value is set to improve the data throughput.
Reason
Change take effect
No
Access
Read/Write
2-2043
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
N/A
2.40.14 Bep_Period2 of uplink

Full Name
Bep_Period2 of uplink
Abbreviated Name
ulBepPeriod2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The protocol (45.008) stipulates the formula of the measurement

data. There is an oblivion factor e, whose value is defined by the
average period of BEP filter. This parameter is used to calculate the
uplink measurement data of a certain MS inside of PCU and takes
priority over the general parameter BEPperiodUp. If this parameter
is unavailable, the BEPperiodUp parameter is used.
Instance
Cell
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
be adjusted.
2-2044
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.40.15 Bep_Period2 of downlink

Full Name
Bep_Period2 of downlink
Abbreviated Name
dlBepPeriod2
Managed Object
3GPP Name
BEP_PERIOD2
3GPP Reference
N/A
Description
This parameter is sent to an MS through PACCH/DL. The protocol

(45.008) stipulates the formula of the measurement data. There is
an oblivion factor e, whose value is defined by the average period
of BEP filter. This parameter is applied to a certain MS and takes
priority over the BEPperiodDown parameter broadcast in the system
message 13 or the packet system message 13. If this parameter
is unavailable, the MS uses the BEPperiodDown parameter. If this
parameter is available, the MS uses it.
Instance
Cell
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
N/A
2-2045
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
be adjusted.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.40.16 Interval number of downlink EGPRS TBF's RRBP

Full Name
Interval number of downlink EGPRS TBF's RRBP
Abbreviated Name
egprsDlRRBPInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the interval at which the downlink EGPRS

TBF requires an MS to send EGPRS Packet Downlink Ack/Nack.
Instance
Cell
Related FG
N/A
6..60
2-2046
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value is, the faster the received downlink
bitmap messages of an MS are notified to the BSC in the EDGE

service, but more uplink signaling blocks are occupied. The greater
the parameter value is, the slower the received downlink bitmap
messages of an MS are notified to the BSC in the EDGE service,
but fewer uplink signaling blocks are occupied. In this case,
the retransmission rate of the RLC layer can be reduced. No
modification is needed unless specially required.
The default value is set it to 10 in a radio network of which the ratio
Reason
of downlink speech RQ05 is around 97%.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2.40.17 Interval number of uplink EGPRS TBF's ACK

Full Name
Interval number of uplink EGPRS TBF's ACK
Abbreviated Name
egprsUlAckInterval
Managed Object
2-2047
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the interval at which the uplink EGPS TBF
network sends packet uplink Ack/Nack to the MS.
Instance
Cell
Related FG
N/A
3..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value is, the faster the received uplink
bitmap messages of the BSC are sent to an MS in the EDGE

service, but more downlink signaling blocks are occupied. The
greater the parameter value is, the slower the received uplink bitmap
messages of the BSC are sent to an MS in the EDGE service, but
fewer downlink signaling blocks are occupied. No modification is
needed unless specially required.
The default value is set it to 8 in a radio network of which the ratio
Reason
of downlink speech RQ05 is around 97%.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2-2048
SJ-20140527134815-013|2015-03-10(R1.1)
2.40.18 Initial EGPRS code schem at one phase access

Full Name
Initial EGPRS code schem at one phase access
Abbreviated Name
OnePhaAccIniECodSch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the value of "OnePhaAccIniCodSet" is 0, this parameter

determines the EGPRS initial code scheme.
Instance
Cell
Related FG
0..8
Unit
N/A
Default Value
Related Parameters
OnePhaAccIniCodSet
If OnePhaAccIniCodSet is 0, set the initial coding according to this
Parameters
parameter.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This function affects all MSs in the cell. Its value can be raised a bit
if only the link setup success rate can be guaranteed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
2-2049
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.40.19 EGPRS prior to GPRS Support

Full Name
EGPRS prior to GPRS Support
Abbreviated Name
EGPRSAllocPri
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether EGPRS is prior to GPRS. After

this function is enabled, in case that the EGPRS and GPRS share
weight of EGPRS.
Instance
Cell
Related FG
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
GBssFunctionPS.EGPRSAllocPri
When both this parameter
Parameters
and the GBssFunctionPS.EGPRSAllocPri parameter are enabled,

this function is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
After this function is enabled, when the EGPRS and GPRS share

weight of EGPRS. Whether to enable this function is determined by
the onsite requirement.
2-2050
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.40.20 EGPRS Uplink Init. Coding Scheme in subcell2

Full Name
EGPRS Uplink Init. Coding Scheme in subcell2
Abbreviated Name
UlInitEGPRSInitAttSeltSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial EGPRS uplink coding scheme

Instance
Cell
Related FG
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
5
2-2051
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
egprsCodecInitUl.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.40.21 EGPRS Downlink Init. Coding Scheme in subcell2

Full Name
EGPRS Downlink Init. Coding Scheme in subcell2
Abbreviated Name
DlInitEGPRSInitAttSeltSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial EGPRS downlink coding scheme

Instance
Cell
2-2052
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
egprsCodecInitDl.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2-2053
SJ-20140527134815-013|2015-03-10(R1.1)
2.40.22 EGPRS Uplink Max. Coding Scheme in subcell2

Full Name
EGPRS Uplink Max. Coding Scheme in subcell2
Abbreviated Name
UlMaxEGPRSInitAttSeltSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum EGPRS uplink coding

Instance
Cell
Related FG
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
egprsCodecMaxUl.
Change take effect
2-2054
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.40.23 EGPRS Downlink Max. Coding Scheme in subcell2

Full Name
EGPRS Downlink Max. Coding Scheme in subcell2
Abbreviated Name
DlMaxEGPRSInitAttSeltSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum EGPRS downlink coding

Instance
Cell
Related FG
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2055
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
egprsCodecMaxDl.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.40.24 Schedule block by quality

Full Name
Schedule block by quality
Abbreviated Name
ScheBlockByQuality
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Users who share a same channel may be in various fading

environments. Some users may have better radio quality but some
others may have poor radio quality, and the radio quality of these
users may change after a period of time. Therefore radio blocks are
sent to the users with better radio quality so that the entire channel
rate may be increased in some scenarios.
2-2056
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
BlockScheOpt
This parameter takes effect after the switch is enabled.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In the radio environment with poor quality, this parameter can be
enabled as required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.40.25 Optimizing of sending downlink small data

Full Name
Optimizing of sending downlink small data
Abbreviated Name
OptSendDlSmallData
Managed Object
2-2057
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
A radio block can carry data in different sizes by using coding

schemes in different levels. The coding scheme in the higher level
requires better radio quality. If the radio block is not fully filled with
data, you can lower the current coding scheme level until it is fully
filled, to increase the transmission reliability of this data block.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In the radio environment with poor quality, this parameter can be
enabled as required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2-2058
SJ-20140527134815-013|2015-03-10(R1.1)
2.40.26 MAX resending times for pending block

Full Name
MAX resending times for pending block
Abbreviated Name
MaxPendingResendNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When a user does not have any new block or retransmission block
to transmit, the user can retransmit the pending block (the block that
is transmitted but not confirmed), to increase the probability that
the data blocks are received properly. This parameter controls the
maximum number of times that the pending block is allowed to be
transmitted in this case.
Instance
Cell
Related FG
N/A
60..255
Unit
N/A
Default Value
120
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When the parameter is decreased in the poor radio environment,
some users who are released due to N3105 overflow may be

counted as abnormal released due to a suspended instance. When
the parameter is increased in the poor radio environment, some
abnormal release due to a suspended instance may be counted as
release due to N3105 overflow.
The default value is an empirical value based on various network
Reason
environments.
Change take effect
No
2-2059
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.40.27 Immediate Assignment on any CCCH and paging

subchannel
Full Name
Immediate Assignment on any CCCH and paging subchannel
Abbreviated Name
ImmAssOnCcchAndPch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to send immediate assignment

messages on any CCCH and PCH.
Instance
Cell
Related FG
N/A
0,1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-2060
SJ-20140527134815-013|2015-03-10(R1.1)
To increase the downlink TBF access rate on CCCHs for MSs in
non-DRX mode, it is recommended that the parameter is set to

1. However, it may cause the number of messages at the radio
interface to increase. In actual applications, whether the parameter
is set to 1 depends on the actual network operation requirement and
network capability.
The parameter is set to keep consistent with that before the
Reason
parameter is added.
Change Take Effect
No
Access
Read/Write
OMC Access path
GUI: Managed Element->GSM Logical Configuration>CellInformation Configuration->GPRS Configuration>EDGEConfiguration
N/A
2.40.28 MS radio access capability required for EGPRS TBF

one-phase access
Full Name
MS radio access capability required for EGPRS TBF one-phase

access
Abbreviated Name
OnePhaseReqRadioCapa
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the MS is required to send the

radio access capability of the requested frequency band in EGPRS
TBF one-phase access.
Instance
Cell
Related FG
0,1
2-2061
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
To enable the BSC to get MS radio access capability information in
a timely manner, it is recommended that the parameter is set to 1.
This parameter is set to keep consistent with that before the
Reason
parameter is added.
Change Take Effect
No
Access
Read/Write
OMC Access path
N/A
2.40.29 Resource reallocation for uplink

Full Name
Resource reallocation for uplink
Abbreviated Name
UlResrcRealloc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2062
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether the resources should be

reallocated when the packet resource request message is received
from an MS in transmission status.
Instance
Cell
Related FG
N/A
0,1,2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
To be compatible with various kinds of MSs, it is recommended that
the parameter is set to 1.
This parameter is set to keep consistent with that before the
Reason
parameter is added.
Change Take Effect
No
Access
Read/Write
OMC Access path
N/A
2.41 Enhanced EDGE Configuration(GEhancedEdge)

2.41.1 Enhanced EDGE Configuration ID
2-2063
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Enhanced EDGE Configuration ID
Abbreviated Name
GEhancedEdgeId
Managed Object
Enhanced EDGE Configuration(GEhancedEdge)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an enhanced EDGE configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Configuration->Enhanced EDGE Configuration
N/A
2-2064
SJ-20140527134815-013|2015-03-10(R1.1)
2.41.2 EGPRS2-A uplink initial coding scheme

Full Name
EGPRS2-A uplink initial coding scheme
Abbreviated Name
egprs2ACodecInitUl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the coding scheme initially used by the

EGPRS2A MS in the uplink.
Instance
Cell
Related FG
4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
13: UAS7
14: UAS8
15: UAS9
16: UAS10
17: UAS11
Unit
N/A
Default Value
15
Related Parameters
egprs2ACodecMaxUl
The value of EGPRS2AInitAttSelt_0 is not greater than that of
Parameters
EGPRS2AInitAttSelt_2.
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
2-2065
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.41.3 EGPRS2-A downlink initial coding scheme

Full Name
EGPRS2-A downlink initial coding scheme
Abbreviated Name
egprs2ACodecInitDl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the coding scheme initially used by the

EGPRS2A MS in the downlink.
Instance
Cell
Related FG
4: MCS1
5: MCS2
6: MCS3
7: MCS4
13: DAS5
14: DAS6
15: DAS7
16: DAS8
17: DAS9
18: DAS10
19: DAS11
20: DAS12
Unit
N/A
Default Value
17
2-2066
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.41.4 EGPRS2-A uplink maximum coding scheme

Full Name
EGPRS2-A uplink maximum coding scheme
Abbreviated Name
egprs2ACodecMaxUl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum coding scheme that can be

used by the EGPRS2A MS in the uplink.
Instance
Cell
Related FG
2-2067
SJ-20140527134815-013|2015-03-10(R1.1)
4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
13: UAS7
14: UAS8
15: UAS9
16: UAS10
17: UAS11
Unit
N/A
Default Value
17
Related Parameters
egprs2ACodecInitUl
The value of EGPRS2AInitAttSelt_1 is not greater than that of
Parameters
EGPRS2AInitAttSelt_3.
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2068
SJ-20140527134815-013|2015-03-10(R1.1)
2.41.5 EGPRS2-A downlink maximum coding scheme

Full Name
EGPRS2-A downlink maximum coding scheme
Abbreviated Name
egprs2ACodecMaxDl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum coding scheme that can be

used by the EGPRS2A MS in the downlink.
Instance
Cell
Related FG
4: MCS1
5: MCS2
6: MCS3
7: MCS4
13: DAS5
14: DAS6
15: DAS7
16: DAS8
17: DAS9
18: DAS10
19: DAS11
20: DAS12
Unit
N/A
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
Reason
2-2069
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.41.6 FANR TBF support

Full Name
FANR TBF support
Abbreviated Name
TBFFanrSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports the Fast

Acknowledgement Report (FANR) function. If both the network and
the MS support this function, the MS can add the DL radio block
reception information in the UL radio block, and the network can add
the UL radio block reception information in the DL radio block. In this
way, the MS and network can be informed timely of the reception of
UL and DL radio blocks, thus accelerating the re-transmission of UL
and DL radio blocks that are not properly received. FANR is one of
the EDGE evolution functions.
Instance
Cell
Related FG
ZGO-03-06-002 FANR
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
FanrSupport
2-2070
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the FANR function is needed on the site, enable it. Otherwise,
disable it.
It is a new function in the protocol. The default value is 0.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.41.7 DLDC support

Full Name
DLDC support
Abbreviated Name
dlDCSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports downlink dual

carrier. If yes, two carriers can be allocated to the downlink.
Instance
Cell
Related FG
ZGO-03-06-004 DLDC
2-2071
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
refGTrx
The refGTrx of GTrx needs to be configured only when this
Parameters
parameter is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.41.8 RTTI support

Full Name
RTTI support
Abbreviated Name
rttiSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2072
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether the Reduced Transmission Time

Interval (RTTI) function is supported.
RTTI is a concept relative to Basic Transmission Time Interval
(BTTI). BTTI means that four consecutive Bursts are used on a
channel to transmit a radio block, and it takes 20 ms to transmit a
radio block. For the RTTI, two consecutive Bursts on two channels
(PDCH-pair) respectively are used, and it takes only 10 ms to
transmit a radio block.
Instance
Cell
Related FG
ZGO-03-06-001 RTTI
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
RTTIPrefer
The RTTIPrefer parameter needs to be configured only when this
Parameters
parameter is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2073
SJ-20140527134815-013|2015-03-10(R1.1)
2.41.9 Enable event-based FANR in downlink TBF

Full Name
Enable event-based FANR in downlink TBF
Abbreviated Name
dlEventBasedFanr
Managed Object

3GPP Name
event-based FANR
3GPP Reference
N/A
Description
This parameter is sent to an MS in packet downlink assignment,

indicating whether the MS uses the event-based FANR, that is,
upon detecting that the downlink block is lost or in disorder, the MS
actively carries the bitmap message of downlink block in the uplink
radio block data.
Instance
Cell
Related FG
ZGO-03-06-002 FANR
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
2-2074
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.41.10 Enable reduced latency access

Full Name
Enable reduced latency access
Abbreviated Name
RttiAccess
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is broadcast to MSs through the SI13/PSI13

message, indicating whether an MS can use RTT for access.
Instance
Cell
Related FG
ZGO-03-06-001 RTTI
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the RTTI function is needed on the site, enable it. Otherwise,
disable it.
It is a new function in the protocol. The default value is 0.
Reason
Change take effect
2-2075
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.41.11 Encoding mode of PAN in uplink TBF

Full Name
Encoding mode of PAN in uplink TBF
Abbreviated Name
ulPanEncodingMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is sent to an MS in packet uplink assignment,

indicating whether the uplink TBF uses SSN-based encoding, that
is, the received bitmap uses the format similar to the received block
bitmap format in the downlink acknowledgment message.
Instance
Cell
Related FG
ZGO-03-06-002 FANR
0: SSN-based encoding
1: time-based encoding
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2076
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
This parameter is set to 0 and does not need to be modified.
This version only fulfills SSN-based codes.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.42 Serving Cell CRRM Configuration(GCrrmCellLd)

2.42.1 Serving Cell CRRM Configuration ID
Full Name
Serving Cell CRRM Configuration ID
Abbreviated Name
GCrrmCellLdId
Managed Object
Serving Cell CRRM Configuration(GCrrmCellLd)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CRRM ID of a serving cell.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-2077
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Serving Cell CRRM Configuration
N/A

Full Name
Abbreviated Name
ulLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold for GSM to determine

whether the uplink load of the local serving cell is low.
Instance
BSC
Related FG
1..100
Unit
%
2-2078
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
balance policy. When the GSM load is not high and GSM cells are
expected to carry more traffic, this threshold can be increased.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
ulLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the uplink load of the local serving cell is medium.
Instance
BSC
2-2079
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
ulLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2080
SJ-20140527134815-013|2015-03-10(R1.1)
Description

whether the uplink load of the local serving cell is high.
Instance
BSC
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlLoadLowThs
Managed Object
2-2081
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the downlink load of the local serving cell is low.
Instance
BSC
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

2-2082
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
dlLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the downlink load of the local serving cell is medium.
Instance
BSC
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2083
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
dlLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the downlink load of the local serving cell is high.
Instance
BSC
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2084
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
ulRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the real-time uplink load of the local serving cell is low.
Instance
BSC
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
2-2085
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A

Full Name
Abbreviated Name
ulRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the real-time uplink load of the local serving cell is medium.
Instance
BSC
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-2086
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
ulRtLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the real-time uplink load of the local serving cell is high.
Instance
BSC
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2087
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the real-time downlink load of the local serving cell is low.
Instance
BSC
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2088
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the real-time downlink load of the local serving cell is
medium.
Instance
BSC
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
2-2089
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlRtLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the real-time downlink load of the local serving cell is high.
Instance
BSC
Related FG
1..100
Unit
Default Value
80
2-2090
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
ulNRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the non-real-time uplink load of the local serving cell is low.
Instance
BSC
Related FG
2-2091
SJ-20140527134815-013|2015-03-10(R1.1)
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
ulNRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2092
SJ-20140527134815-013|2015-03-10(R1.1)
Description

whether the non-real-time uplink load of the local serving cell is
medium.
Instance
BSC
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
ulNRtLoadHighThs
2-2093
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the non-real-time uplink load of the local serving cell is high.
Instance
BSC
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2094
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
dlNRtLoadLowThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

whether the non-real-time downlink load of the local serving cell
is low.
Instance
BSC
Related FG
1..100
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2095
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
dlNRtLoadMidThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is medium.
Instance
BSC
Related FG
1..100
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-2096
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
dlNRtLoadHighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is high.
Instance
BSC
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2097
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.43 SubCell(GSubCell)
2.43.1 SubCell ID
Full Name
SubCell ID
Abbreviated Name
GSubCellId
Managed Object
SubCell(GSubCell)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a subcell ID.
Instance
BSC
Related FG
N/A
1..2
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
2-2098
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->SubCell
N/A
2.43.2 SubCell Sequence

Full Name
SubCell Sequence
Abbreviated Name
GSubCellSeq
Managed Object
SubCell(GSubCell)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the subcell sequence.
Instance
Cell
Related FG
1..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2099
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
The cell of CoBCCH structure is used to create subcell 2.
By default, CoBCCH is not used.
Reason
Change take effect
No
Access
Restricted
OMC Access path

N/A
2.43.3 Frequency Band of SubCell

Full Name
Frequency Band of SubCell
Abbreviated Name
subFreqBand
Managed Object
SubCell(GSubCell)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the frequency band of a subcell.
Instance
Cell
Related FG
0: GSM900\(1..124\)(GSM900\(1..124\))
1: EGSM900\(0 .. 124,975 .. 1023\)(EGSM900\(0..124,975..1023\))
2: DCS1800\(512 .. 885\)(DCS1800\(512..885\))
4: PCS1900\(512 .. 810\)(PCS1900\(512..810\))
7: GSM850\(128..251\)(GSM850\(128..251\))
Unit
N/A
2-2100
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
When the "Use subcells" parameter is set to "Yes", this parameter
Parameters
can be configured.
The configuration of the DCS1800/PCS1900 support parameter
affects the value range of this parameter.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.43.4 Frequency Pool DN

Full Name
Frequency Pool DN
Abbreviated Name
refGBssDynFreqPool
Managed Object
SubCell(GSubCell)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the dynamic frequency pool DN for this

subcell.
2-2101
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
N/A
Unit
N/A
Default Value
Related Parameters
FreqBand
SubFreqBand
The frequency band of the dynamic frequency pool must be the
Parameters
same with that of the subcell.
Value Type
string
Parameter Type
Negotiation With CN
Yes
Function Switch
No
During the dynamic frequency allocation, a few frequencies are
selected to be dynamic frequencies that form one or more frequency

pools. Cells in the same area use a same frequency pool, or use
the frequency pool in accordance with a certain rule, for example,
three cells of a site can uses three different frequency pools.
The default value means no dynamic frequency pool.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.44 Subcell Handover Control(GScHandoverControl)

2.44.1 COBCCH Handover Control ID
2-2102
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
COBCCH Handover Control ID
Abbreviated Name
GScHandoverControlId
Managed Object
Subcell Handover Control(GScHandoverControl)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a COBCCH handover control ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Subcell Handover Control
N/A
2-2103
SJ-20140527134815-013|2015-03-10(R1.1)
2.44.2 PBGT handover start threshold of subcell2

Full Name
PBGT handover start threshold of subcell2
Abbreviated Name
PbgtHoStartThsSC2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When an MS operates in subcell 2, the PBGT handover decision

is made until the downlink level of the current cell is lower than the
start level threshold for PBGT handover decision.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To reduce unnecessary handover, decrease the parameter value.
To ensure timely handover, increase the parameter value.
Generally, it is considered that the signal strength is good when the
Reason
power is -65 dBm and PBGT handover needn't be originated.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
2-2104
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.44.3 FR to AMRHR handover load threshold of subcell2

Full Name
FR to AMRHR handover load threshold of subcell2
Abbreviated Name
FrToAmrHrHoLoadThSC2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the load of subcell 2 reaches a certain level, FR->HR(V3)

handover needs to be initiated to obtain more channel resources
and improve the system capacity. This parameter indicates the load
threshold for initiating FR->HR(V3) handover.
The parameter value should be greater than or equal to
FrToHrHoLoadThrSC2.
The load is calculated as follows: Load = number of busy channels
in the subcell * 100 / (number of busy channels in the subcell +
number of idle channels in the subcell)
Instance
Cell
Related FG
20..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2105
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter takes effect when the FRTHRHOSupport switch is
enabled for the cell.

The greater the parameter is, the higher the load required by subcell
2 to originate FR->HR(V3) handover, and the less the opportunity is.
The smaller the parameter is, the lower the load required by subcell
2 to originate FR->HR(V3) handover, and the more the opportunity
is.
If the parameter value is too small, subcell 2 will hands over in the
cell more frequently.
When the load of subcell 2 reaches 80%, subcell2 is considered to
Reason
be busy and FR-to-HR(V3) handover is performed to improve the

system capacity.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.44.4 The load of HO from FR to HR(V1) in subcell2

Full Name
The load of HO from FR to HR(V1) in subcell2
Abbreviated Name
FrToHrHoLoadThrSC2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2106
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When the load of subcell 2 reaches a certain level, FR->HR(V1)

FrToAmrHrHoLoadThSC2.
in the subcell * 100 / (number of busy channels in the subcell +
number of idle channels in the subcell)
Instance
Cell
Related FG
20..100
Unit
Default Value
90
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
enabled for the cell.

The greater the parameter is, the higher the load required by subcell
2 to originate FR->HR(V1) handover, and the less the opportunity is.
The smaller the parameter is, the lower the load required by subcell
2 to originate FR->HR(V1) handover, and the more the opportunity
is.
If the parameter value is too small, subcell 2 will hands over in the
cell more frequently.
When the load of subcell 2 reaches 90%, subcell2 is considered to
Reason
be busy and FR-to-HR(V1) handover is performed to improve the

system capacity.
Change take effect
No
Access
Read/Write
2-2107
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.100/V6.30.100
N/A
2.44.5 SubCell handover algorithm(High Speed)

Full Name
SubCell handover algorithm(High Speed)
Abbreviated Name
hoControlScHoOpt_H
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates two handover modes of inter-subcell

handover algorithm in the case of high speed: One is based on C/I,
and the other is based on path loss and TA.
Instance
Cell
Related FG
0: Concentric handover
1: Handover based on path loss and TA
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The recommended value is "1: Handover based on path loss and
TA". In the existing network the COBCCH handover is based on

path loss and TA.
It is recommended that the default value is set to 1 because the
Reason
algorithm is mature.
Change take effect
2-2108
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.44.6 SubCell handover algorithm(Middle Speed)

Full Name
SubCell handover algorithm(Middle Speed)
Abbreviated Name
hoControlScHoOpt_M
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

handover algorithm in the case of medium speed: One is based on
C/I, and the other is based on path loss and TA.
Instance
Cell
Related FG
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2109
SJ-20140527134815-013|2015-03-10(R1.1)

path loss and TA.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.44.7 SubCell handover algorithm(Low Speed)

Full Name
SubCell handover algorithm(Low Speed)
Abbreviated Name
hoControlScHoOpt_L
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

handover algorithm: One is based on C/I, and the other is based on
path loss and TA.
Instance
Cell
Related FG
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2110
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

path loss and TA.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.44.8 The MAX of path loss

Full Name
The MAX of path loss
Abbreviated Name
pathLossMax
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2111
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter is one of the subcell handover parameters and

sets the maximum threshold for path loss. During assignment,
if byPathLoss is less than PathLossMin and TA is less than
SubCellTAMin, the channels in subcell 2 are selected first. If
byPathLoss is more than or equal to PathLossMin or TA is more
than or equal to SubCellTAMin, only the channels in subcell 1
can be selected. During handover, if the current call is in subcell
1, the TA value is smaller than the SubCellTAMin threshold set
by cell parameters. Meanwhile, the path loss calculated by the
downlink level is lower than the PathLossMin threshold set by cell
parameters. That is, byPathLoss is less than PathLossMin and
TA is less than SubCellTAMin. If SubCellP in SubCellN satisfies
byPathLoss < PathLossMin and TA < SubCellTAMin, and the MS
supports the frequency band of subcell 2, handover to the subcell
can be performed from subcell 1 to subcell 2. If the current call is
in subcell 2, and SubCellN PathLoss and SubCellP in TA values
satisfy PathLoss PathLossMax or TA SubCellTAMax, the path
loss and TA handover conditions are met, the call is handed over
from subcell 2 to subcell 1.
Instance
Cell
Related FG
0..151
Unit
dB
Default Value
126
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater the parameter value is, the more difficult it is to originate
handover from subcell 2 to subcell 1 due to path loss.
The default value is set based on experience.
Reason
Change take effect
No
0
2-2112
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.44.9 The MIN of path loss

Full Name
The MIN of path loss
Abbreviated Name
pathLossMin
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is one of the subcell handover parameters and sets

the minimum threshold for path loss. For the description, refer to
PathLossMax.
Instance
Cell
Related FG
0..152
Unit
dB
Default Value
120
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater the parameter value is, the easier it is to originate a call
in subcell 2, and the easier it is to originate handover from subcell

1 to subcell 2.
Reason
2-2113
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.44.10 The MAX of time advance

Full Name
The MAX of time advance
Abbreviated Name
SubCellTAMax
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

sets the maximum threshold for TA. For the description, refer to
PathLossMax.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
63
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2114
SJ-20140527134815-013|2015-03-10(R1.1)
The greater the parameter value is, the more difficult it is to originate
handover from subcell 2 to subcell 1 due to TA.
For normal scenarios, only the pathloss is used as the subcell
Reason
handover condition, and TA is set to the maximum value by default.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.44.11 The MIN of time advance

Full Name
The MIN of time advance
Abbreviated Name
SubCellTAMin
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

sets the minimum threshold for TA. For the description, refer to
PathLossMax.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
62
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2115
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater the parameter value is, the easier it is to originate a call
in subcell 2, and the easier it is to originate handover from subcell

1 to subcell 2.
For normal scenarios, only the pathloss is used as the subcell
Reason
handover condition, and TA is set to the maximum value by default.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.44.12 Inter Site handover to SubCell2 permitted

Full Name
Inter Site handover to SubCell2 permitted
Abbreviated Name
HoToInnerSc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an MS is allowed to directly hand

over to subcell 2 of this cell from other sites. Other sites include
the sites of external BSCs.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
2-2116
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to enable the function if subcells are configured
and subcell 2 is expected to carry more traffic. After the function is

enabled, subcell 2 can carry more traffic, but the handover success
rate may be decreased.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.44.13 Measure BCCH when in subcell2

Full Name
Measure BCCH when in subcell2
Abbreviated Name
SubCell2MeasureBcch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2117
SJ-20140527134815-013|2015-03-10(R1.1)
Description
If this parameter is set to "Yes", the system adds a BCCH frequency

point for broadcasting this cell in the SACCH system message
of subcell 2. After MSs submit measurement reports, the system
collects statistics on the sampling distribution of level difference
between subcells 1 and 2. If the MR function is enabled, the system
reports the level difference in the MR.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The function is enabled in accordance with the requirements of the
operator or network optimization.
The function is enabled in accordance with the requirements of the
Reason
operator or network optimization.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.44.14 Good C/I

2-2118
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Good C/I
Abbreviated Name
goodCiThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the system uses concentric handover, a handover decision can be

The judgment process is as follows:
The current call is on the common TRX (frequency). If P out of the
latest N C/I values are larger than the related threshold, handover
should be performed. The reason is Good C/I. The call is handed
over from the common TRX to the special TRX.
The GoodCiThs parameter defines the related threshold, GoodCiN
defines the related N value, and GoodCiP defines the related P
value.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
133
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is valid when the concentric structure is configured
and the handover algorithm based on C/I is used. The smaller the
parameter value is, the easier it is to meet the handover conditions.
The greater the parameter value is, the more difficult it is to meet
the handover conditions.
Reason
Change take effect
No
2-2119
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.44.15 Good value P

Full Name
Good value P
Abbreviated Name
goodCiP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

value.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2120
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.44.16 Good value N

Full Name
Good value N
Abbreviated Name
goodCiN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2121
SJ-20140527134815-013|2015-03-10(R1.1)
Description

value.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2122
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.44.17 Bad C/I

Full Name
Bad C/I
Abbreviated Name
badCiThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

The current call is on the special TRX (frequency). If P out of the
latest N C/I values are smaller than the related threshold, handover
should be performed. The reason is Bad C/I. The call is handed
over from the special TRX to the common TRX.
The BadCiThs parameter defines the related threshold, BadCiN
defines the related N value, and BadCiP defines the related P value.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
130
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2123
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.44.18 Bad value P

Full Name
Bad value P
Abbreviated Name
badCiP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
2-2124
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.44.19 Bad value N

Full Name
Bad value N
Abbreviated Name
badCiN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2125
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2126
SJ-20140527134815-013|2015-03-10(R1.1)
2.44.20 Handover Parameter N of SubCell1

Full Name
Handover Parameter N of SubCell1
Abbreviated Name
SubCell1N
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is one of the conditions for inter-subcell handover

decision. For the parameter description, refer to PathLossMax.
Instance
Cell
Related FG
1..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter and the parameter SubCell1P are used together for
determining an inter-subcell handover. The larger the value of P/N

is, the less likely a handover decision is made. The smaller the
value of P/N is, the more likely a handover decision is made.
This default value is an empirical value in common radio conditions.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2127
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.101/V6.30.101
N/A
2.44.21 Handover Parameter P of SubCell1

Full Name
Handover Parameter P of SubCell1
Abbreviated Name
SubCell1P
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter and the parameter SubCell1N are used together for
determining an inter-subcell handover. The larger the value of P/N

is, the less likely a handover decision is made. The smaller the
value of P/N is, the more likely a handover decision is made.
This default value is an empirical value in common radio conditions.
Reason
Change take effect
No
2-2128
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.44.22 Handover Parameter N of SubCell2

Full Name
Handover Parameter N of SubCell2
Abbreviated Name
SubCell2N
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..10
Unit
N/A
Default Value
Related Parameters
SubCell2P
SubCell2NSubCell2P
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
decision.
Change take effect
2-2129
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.44.23 Handover Parameter P of SubCell2

Full Name
Handover Parameter P of SubCell2
Abbreviated Name
SubCell2P
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..10
Unit
N/A
Default Value
Related Parameters
SubCell2N
SubCell2NSubCell2P
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2130
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
decision.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.44.24 SubCell2 To SubCell1 Handover Threshold

Full Name
SubCell2 To SubCell1 Handover Threshold
Abbreviated Name
SubCellHoDLThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the level threshold of subcell 1 in a

handover from subcell 2 to subcell 1 when the subcell BCCH
measurement is enabled (Subcell2MeasureBcch=1). An MS can be
handed over from subcell 2 to subcell 1 only when the level in subcell
1 exceeds this threshold and the other handover conditions are met.
Instance
Cell
Related FG
0: < -110dBm
1: -110~-109 dBm
2: -109~-108dBm
3: -108~-107dBm
4: -107~-106dBm
5: -106~-105dBm
6: -105~-104dBm
7: -104~-103dBm
8: -103~-102dBm
9: -102~-101dBm
2-2131
SJ-20140527134815-013|2015-03-10(R1.1)
10: -101~-100dBm
11: -100~-99dBm
12: -99~-98dBm
13: -98~-97dBm
14: -97~-96dBm
15: -96~-95dBm
16: -95~-94dBm
17: -94~-93dBm
18: -93~-92dBm
19: -92~-91dBm
20: -91~-90dBm
21: -90~-89dBm
22: -89~-88dBm
23: -88~-87dBm
24: -87~-86dBm
25: -86~-85dBm
26: -85~-84dBm
27: -84~-83dBm
28: -83~-82dBm
29: -82~-81dBm
30: -81~-80dBm
31: -80~-79dBm
32: -79~-78dBm
33: -78~-77dBm
34: -77~-76dBm
35: -76~-75dBm
36: -75~-74dBm
37: -74~-73dBm
38: -73~-72dBm
39: -72~-71dBm
40: -71~-70dBm
41: -70~-69dBm
42: -69~-68dBm
43: -68~-67dBm
44: -67~-66dBm
45: -66~-65dBm
46: -65~-64dBm
47: -64~-63dBm
48: -63~-62dBm
49: -62~-61dBm
50: -61~-60dBm
51: -60~-59dBm
52: -59~-58dBm
53: -58~-57dBm
2-2132
SJ-20140527134815-013|2015-03-10(R1.1)
54: -57~-56dBm
55: -56~-55dBm
56: -55~-54dBm
57: -54~-53dBm
58: -53~-52dBm
59: -52~-51dBm
60: -51~-50dBm
61: -50~-49dBm
62: -49~-48dBm
63: > -48dBm
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be adjusted to a larger value if the service
quality is not good after the MS is handed over to subcell 1.
The default value indicates a level that ensures normal services
Reason
in a cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.44.25 The load of HO from HR(V1) to FR for Subcell2

Full Name
The load of HO from HR(V1) to FR for Subcell2

2-2133
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
HrToFrHoLoadThrSC2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the load on a sub-cell decreases to a certain point, an

HR(V1)->FR handover is triggered to improve voice quality. This
parameter specifies the load threshold for a cell to trigger an
HR(V1)->FR handover.
Instance
Cell
Related FG
ZGO-03-02-013 Dynamic FR/HR Adjustment
0..100
Unit
Default Value
30
Related Parameters
AmrHrToFrHoLoadThSC2
AmrHRThs >HrToFrHoLoadThrSC2> =AmrHrToFrHoLoadThSC2,
Parameters
FrToHrHoLoadThrSC2> HrToFrHoLoadThrSC2
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The FR mode can be applied to increase the channel load, which
may reach the threshold of the dynamic HR. For this reason, a
balance should be reached between the two thresholds so that
not only user experience is improved, but also handovers will not
happen too frequently.
This is a compromise made between user experience and channel
Reason
load. For example, if the load on a channel is lower than 30, the FR
mode can be applied to improve user experience.
Change take effect
No
Access
Read/Write
OMC Access path

2-2134
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.101/V6.30.101
N/A
2.44.26 The load of HO from HR(V3) to FR for Subcell2

Full Name
The load of HO from HR(V3) to FR for Subcell2
Abbreviated Name
AmrHrToFrHoLoadThSC2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the load on a sub-cell decreases to a certain point, an

HR(V3)->FR handover is triggered to improve voice quality. This
parameter specifies the load threshold for a cell to trigger an
HR(V3)->FR handover. If the load is lower than this threshold,
priority is first given to HR(1)->FR handover, and then to
HR(V3)->FR handover.
Instance
Cell
Related FG
0..100
Unit
Default Value
20
Related Parameters
HrToFrHoLoadThrSC2
AmrHRThs >HrToFrHoLoadThrSC2>= AmrHrToFrHoLoadThSC2,
Parameters
FrToAmrHrHoLoadThSC2> AmrHrToFrHoLoadThSC2
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The AMR FR mode can be applied to increase the channel load,
which may reach the threshold of the dynamic HR. For this reason,
a balance should be reached between the two thresholds so that
2-2135
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
load. For example, if the load on a channel is lower than 20, the
AMR FR mode can be applied to improve user experience.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.44.27 Use Load Balance

Full Name
Use Load Balance
Abbreviated Name
UseLoadBalance
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether the inter-subcell load balance

policy is used. If this policy is used, the load on a subcell is involved
in channel assignment and triggers inter-subcell handover.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
CSAllocSC
The parameter UseLoadBalance must be set to 1 when the
Parameters
parameter CSAllocSC is set to 1 (subcell 1 is preferred for channel

allocation).
Value Type
long
2-2136
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The load balance mode is usually adopted for the China Mobile
network as required by the customer. It is not used for other

networks.
The inter-subcell load balance policy mainly caters to the needs of
Reason
China Mobile's subscribers for dual-frequency and co-cell currently.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.28 Traffic High Load Threshold of SubCell1

Full Name
Traffic High Load Threshold of SubCell1
Abbreviated Name
SC1HighLoadThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the high load threshold of subcell 1.

If priority is given to channel allocation to subcell 1 (SubCellAssign=0,
CSAllocSC=1) during assignment, channels are allocated as follows:
(1) If the value of TA/path loss (or C/I) does not qualify for channel
allocation to subcell 2, channels are allocated only to subcell 1;
(2) If the value of TA/path loss (or C/I) qualifies for channel
allocation to subcell 2, and the load on subcell 1 is lower than
SC1HighLoadThs, priority is given to channel allocation to subcell 1;
3) If the value of TA/path loss (or C/I) qualifies for channel allocation
to subcell 2, the load on subcell 1 is higher than SC1HighLoadThs,
2-2137
SJ-20140527134815-013|2015-03-10(R1.1)
while the load on subcell 2 is lower than SC2HighLoadThs, priority

is given to channel allocation to subcell 2;
allocation to subcell 2, and the loads of subcell 1 are higher than
SC1HighLoadThs and subcell 2 higher than SC2HighLoadThs,
priority is given to channel allocation to subcell 1.
(3) If the value of TA/path loss (or C/I) qualifies for channel allocation
to subcell 2, the load of subcell 2 is higher than SC2HighLoadThs,
SC2HighLoadThs and subcell 1 higher than SC1HighLoadThs
respectively, priority is given to channel allocation to subcell 2.
Instance
Cell
Related FG
0..100
Unit
N/A
Default Value
70
Related Parameters
SC1HoOutLoadThs
SC1HoInLoadThs
SC1HoOutLoadThs>=SC1HighLoadThs>=SC1HoInLoadThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Raise the value a bit if subcell 1 is expected to access more
subscribers. Do not use a big value if subcell 1 hasn't many

available channels.
The value of 70 is considered to be comparatively high for a traffic
Reason
load.
Change take effect
2-2138
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.29 Traffic Threshold of Handover out SubCell1

Full Name
Traffic Threshold of Handover out SubCell1
Abbreviated Name
SC1HoOutLoadThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the traffic threshold of an outgoing

handover from subcell 1. If the inter-subcell load balance function
is enabled (UseLoadBalance=1), the load on subcell 1 is higher
than SC1HoOutLoadThs, while the load on subcell 2 is lower than
SC2HoInLoadThs, the subscriber with the minimum path loss (or the
maximum C/I) in subcell 1 is selected to be handed over to subcell 2.
Instance
Cell
Related FG
0..100
Unit
N/A
Default Value
85
Related Parameters
SC1HighLoadThs
SC1HoInLoadThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2139
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No

available channels.
The value of 85% is considered as a comparatively high load that an
Reason
outgoing handover is necessary.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.30 Traffic Threshold of Handover in SubCell1

Full Name
Traffic Threshold of Handover in SubCell1
Abbreviated Name
SC1HoInLoadThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the traffic threshold of an incoming

handover to subcell 1. If the inter-subcell load balance function is
enabled (UseLoadBalance=1), it is necessary to verify whether the
load on subcell 1 is not higher than this threshold for an incoming
handover to subcell 2 from subcell 1.
Instance
Cell
Related FG
0..100
Unit
N/A
Default Value
50
2-2140
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
SC1HighLoadThs
SC1HoOutLoadThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

available channels.
The value of 50% is considered as a comparatively low load that an
Reason
incoming handover is permitted.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.31 Traffic High Load Threshold of SubCell2

Full Name
Traffic High Load Threshold of SubCell2
Abbreviated Name
SC2HighLoadThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2141
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies the high load threshold of subcell 2.

Instance
Cell
Related FG
0..100
Unit
N/A
Default Value
70
Related Parameters
SC2HoOutLoadThs
SC2HoInLoadThs
Parameters
Value Type
long
2-2142
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
subscribers.
The value of 70 is considered to be comparatively high for a traffic
Reason
load.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.32 Traffic Threshold of Handover out SubCell2

Full Name
Traffic Threshold of Handover out SubCell2
Abbreviated Name
SC2HoOutLoadThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the traffic threshold of an outgoing

handover from subcell 2. If the inter-subcell load balance function
is enabled (UseLoadBalance=1), the load on subcell 2 is higher
than SC2HoOutLoadThs, while the load on subcell 1 is lower than
SC1HoInLoadThs, the subscriber with the maximum path loss (or
the minimum C/I) in subcell 2 is selected to be handed over to
subcell 1.
Instance
Cell
Related FG
0..100
2-2143
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
85
Related Parameters
SC2HighLoadThs
SC2HoInLoadThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
subscribers.
The value of 85% is considered as a comparatively high load that an
Reason
outgoing handover is necessary.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.33 Traffic Threshold of Handover in SubCell2

Full Name
Traffic Threshold of Handover in SubCell2
Abbreviated Name
SC2HoInLoadThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2144
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies the traffic threshold of an incoming

handover to subcell 2. If the inter-subcell load balance function is
enabled (UseLoadBalance=1), it is necessary to verify whether the
load on subcell 2 is not higher than this threshold for an incoming
handover to subcell 2 from subcell 1.
Instance
Cell
Related FG
0..100
Unit
N/A
Default Value
50
Related Parameters
SC2HighLoadThs
SC2HoOutLoadThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
subscribers.
The value of 50% is considered as a comparatively low load that an
Reason
incoming handover is permitted.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.34 The MAX of path loss for assignment

Full Name
The MAX of path loss for assignment

2-2145
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
AssPathLossMax
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the maximum path loss for subcell

assignment and can be set separately from the handover threshold.
Instance
Cell
Related FG
0..153
Unit
dB
Default Value
126
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Not available.
Consistent with the default value of the parameter pathLossMax.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2-2146
SJ-20140527134815-013|2015-03-10(R1.1)
2.44.35 The MIN of path loss for assignment

Full Name
The MIN of path loss for assignment
Abbreviated Name
AssPathLossMin
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the minimum path loss for subcell

Instance
Cell
Related FG
0..154
Unit
dB
Default Value
120
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Raise the value if more traffic is to be assigned to subcell 2.
Otherwise, lower the value. Do not use a big value if subcell 2 hasn't
many available channels.
Consistent with the default value of the parameter pathLossMin.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
2-2147
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.44.36 The MAX of time advance for assignment

Full Name
The MAX of time advance for assignment
Abbreviated Name
AssSubCellTAMax
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the maximum TA threshold for subcell

Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
63
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Not available.
Consistent with the default value of the parameter SubCellTAMax.
Reason
Change take effect
No
Access
Read/Write
2-2148
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.37 The MIN of time advance for assignment

Full Name
The MIN of time advance for assignment
Abbreviated Name
AssSubCellTAMin
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the minimum TA threshold for subcell

Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
62
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Raise the value if more traffic is to be assigned to subcell 2.
Otherwise, lower the value. Do not use a big value if subcell 2 hasn't
Consistent with the default value of the parameter SubCellTAMin.
Reason
Change take effect
No
2-2149
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.38 Good C/I for assignment

Full Name
Good C/I for assignment
Abbreviated Name
AssGoodCiThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the Good C/I threshold for subcell

Instance
Cell
Related FG
0..255
Unit
dB
Default Value
133
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Lower the value if more traffic is to be assigned to subcell 2.
Otherwise, raise the value. Do not use a big value if subcell 2 hasn't
2-2150
SJ-20140527134815-013|2015-03-10(R1.1)
Consistent with the default value of the parameter goodCiThs.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.39 Bad C/I for assignment

Full Name
Bad C/I for assignment
Abbreviated Name
AssBadCiThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the Bad C/I threshold for subcell

Instance
Cell
Related FG
0..255
Unit
dB
Default Value
130
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2151
SJ-20140527134815-013|2015-03-10(R1.1)
Not available.
Consistent with the default value of the parameter badCiThs.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.44.40 Penalty time for inter-subcell handover failure

Full Name
Penalty time for inter-subcell handover failure
Abbreviated Name
SChoFailPenalTime
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the penalty time in case of inter-subcell

handover failure. It can be set separately from the penalty time for
inter-cell handover failure.
Instance
Cell
Related FG
1..255
Unit
N/A
Default Value
14
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2152
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Prolong or shorten the period to delay or speed up the subcell
handover judgment. It should not be shortened too much.
Consistent with the default value of the parameter hofailpenaltime.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.45 SubCell PS Channel Allocation

Configuration(GSubCellPsAlloc)
2.45.1 SubCell PS Channel Allocation Configuration ID
Full Name
SubCell PS Channel Allocation Configuration ID
Abbreviated Name
GSubCellPsAllocId
Managed Object
SubCell PS Channel Allocation Configuration(GSubCellPsAlloc)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a subcell PS channel allocation

configuration ID.
Instance
BSC
Related FG
N/A
2-2153
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->SubCell PS Channel Allocation
Configuration
N/A
2.45.2 SubCell selection of PS channel allocation

Full Name
SubCell selection of PS channel allocation
Abbreviated Name
psAllocSc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2154
SJ-20140527134815-013|2015-03-10(R1.1)
Description
After subcells are configured, the subcell selection policies can be

controlled by this parameter. The options include Prefer subcell 1,
Prefer subcell 2, and Only subcell 1. This parameter affects the
parameter policy used by the control plane for requesting channels
from the database. The user plane determines the parameter
policy to be used for channel application in accordance with the
configuration of this parameter.
Configuration description:
Only subcell 1: The parameter policy sent from the control plane
to the database can only be subcell 1. This parameter should be
configured if the current network only requires subcell1 to support
PS services.
Prefer subcell 1: When the user can be in subcell 1 or 2 (determined
by the level and TA value), the allocation policy sent to the database
is Prefer subcell 1.
Prefer subcell 2: When the user can be in subcell 1 or 2 (determined
by the level and TA value), the allocation policy sent to the database
is Prefer subcell 2.
The principles for the database to allocate these three parameter
policies are as follows:
Only subcell 1: PS services can only be allocated to the channel
of subcell 1.
Prefer subcell 1: PS services are allocated to subcell 1 first unless
the number of PFC users is too large or the number of available
channels in subcell 1 is inadequate.
Prefer subcell 2: PS services are allocated to subcell 2 first unless
the number of PFC users is too large or the number of available
channels in subcell 2 is inadequate.
Instance
Cell
Related FG
0: Prefer subcell 1
1: Prefer subcell 2
2: Only subcell 1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2155
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
If only subcell 1 is configured with available PS channels on the site,
this parameter can be set to Prefer subcell 1.

If the PS service in subcell 1 is congested, and there are available
PS channels in subcell 2, this parameter can be set to Prefer subcell
2.
By default, subcell 1 carries PS traffic, so PS channels are
Reason
preferentially allocated to subcell 1.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.45.3 RXLEV threshold in SubCell 1

Full Name
RXLEV threshold in SubCell 1
Abbreviated Name
rxLevThs1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
After subcells are configured, this parameter is used to control the

level threshold for selecting subcell 1.
When the PS channel is in subcell 2, and the level is smaller
than PSALLOCSC_1 and TA is larger than PagBlkRes, then it is
necessary to move to subcell 1.
If the channel allocation policy configured at the background is
"Prefer subcell 2", channels in subcell 2 will be selected first.
2-2156
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
20
Related Parameters
psAllocSc
This parameter is valid only when the PSALLOCSC_0 parameter is
Parameters
set to Prefer subcell 2 or Prefer subcell 1.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be set based on the onsite conditions. If the
PS traffic in subcell 1 is high, increase the parameter value properly.
This parameter is configured based on the actual conditions.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.45.4 RXLEV threshold in SubCell 2

Full Name
RXLEV threshold in SubCell 2
Abbreviated Name
rxLevThs2
Managed Object

3GPP Name
N/A
2-2157
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
After subcells are configured, this parameter is used to control the

level threshold for selecting subcell 2.
When the PS channel is in subcell 1, and the level is smaller
than PSALLOCSC_2 and TA is larger than PagBlkRes, then it is
necessary to move to subcell 2.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
40
Related Parameters
psAllocSc
This parameter is valid only when the PSALLOCSC_0 parameter is
Parameters
set to Prefer subcell 2 or Prefer subcell 1.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be set based on the onsite conditions. If the
PS traffic in subcell 2 is high, increase the parameter value properly.
This parameter is configured based on the actual conditions.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-2158
SJ-20140527134815-013|2015-03-10(R1.1)
2.45.5 RxLev P Value

Full Name
RxLev P Value
Abbreviated Name
RxLevP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the P value of the level for subcell

handover decision. If P out of N signal strength values meet this
threshold, handover is required.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter affects the cell decision sensitivity. The greater
the parameter value is, the less sensitive the decision is. It is not
recommended to modify the default value.
Reason
Change take effect
No
Access
Read/Write
2-2159
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
N/A
2.45.6 RxLev N Value

Full Name
RxLev N Value
Abbreviated Name
RxLevN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the N value of the level for subcell

handover decision. If P out of N signal strength values meet this
threshold, handover is required.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
2-2160
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.45.7 TA threshold for PS channel allocate in SubCell1

Full Name
TA threshold for PS channel allocate in SubCell1
Abbreviated Name
TaLevelThs1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum TA threshold for channel

allocation in subcell 1. When the TA value is higher than this
threshold, channels will be allocated to subcell 1.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2161
SJ-20140527134815-013|2015-03-10(R1.1)
The greater the parameter value is, the more difficult it is to
allocate channels to subcell 1. If subcell 2 has good coverage, the

parameter value can be increased properly. Otherwise, decrease
The default value is set based on the general subcell coverage area.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.45.8 TA threshold for PS channel allocate in SubCell2

Full Name
TA threshold for PS channel allocate in SubCell2
Abbreviated Name
TaLevelThs2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum TA threshold for channel

allocation in subcell 2. When the TA value is lower than this
threshold, channels will be allocated to subcell 2.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
2-2162
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value is, the more difficult it is to
allocate channels to subcell 2. If subcell 2 has good coverage, the

parameter value can be increased properly. Otherwise, decrease
The default value is set based on the general subcell coverage area.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.45.9 TA P Value
Full Name
TA P Value
Abbreviated Name
TaP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the P value of TA for subcell handover

decision. If P out of N TA values meet this threshold, handover is
required.
Instance
Cell
2-2163
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.45.10 TA N Value
Full Name
TA N Value
Abbreviated Name
TaN
Managed Object

3GPP Name
N/A
2-2164
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the N value of TA for subcell handover

decision. If P out of N TA values meet this threshold, handover is
required.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2.45.11 SubCell1 PS Busy Threshold

Full Name
SubCell1 PS Busy Threshold

2-2165
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
SubCell1PsChanThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the busy level threshold of subcell 1.

When the busy level of channels in subcell 1 exceeds this threshold,
the system triggers reselection to subcell 2.
Instance
Cell
Related FG
0..100
Unit
Default Value
80
Related Parameters
SubCell1HighThs
SubCell1InThs
SubCell1PsChanThs>=SubCell1HighThs>= SubCell1InThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be set based on the existing network
conditions. To ensure the load of subcell 1 is not high, decrease the

parameter value properly.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
N/A
2-2166
SJ-20140527134815-013|2015-03-10(R1.1)
2.45.12 SubCell2 PS Busy Threshold

Full Name
SubCell2 PS Busy Threshold
Abbreviated Name
SubCell2PsChanThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the busy level threshold of subcell 2.

When the busy level of channels in subcell 2 exceeds this threshold,
the system triggers reselection to subcell 1.
Instance
Cell
Related FG
0..100
Unit
Default Value
80
Related Parameters
SubCell2HighThs
SubCell2InThs
SubCell2PsChanThs>=SubCell2HighThs> =SubCell2InThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be set based on the existing network
conditions. To ensure the load of subcell 2 is not high, decrease the

parameter value properly.
Reason
Change take effect
No
Access
Read/Write
2-2167
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
N/A
2.45.13 Band priority based Initial access in CoBcch cell

Full Name
Band priority based Initial access in CoBcch cell
Abbreviated Name
CoBPriBandAcc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the initial access in a CoBCCH

cell is based on the priority policy configured by the NMS. If it is set
to 0, priority is given to subcell 1 for the initial access by default (at
900 MHz). If it is set to 1, the initial access is based on the priority
policy configured by the NMS, that is, the frequency band with a high
priority configured by the parameter PSALLOCSC[0] is selected.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-2168
SJ-20140527134815-013|2015-03-10(R1.1)
To make the 1800M absorb more PS services, set the value to 1
so that the selection policy configured by NMS will be adopted to

perform initial access allocation. Also set PSALLOCSC[0] to 1 to
access 1800M with priority.
Consistent with the previous version (900 MHz for the initial access)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2.45.14 SubCell 1 high load threshold

Full Name
SubCell 1 high load threshold
Abbreviated Name
SubCell1HighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the high load threshold for the initial
access to subcell 1. It works only when the SubCellLoadBalance is
turned On. During an initial access, it determines what sub-cell to
be allocated based on the load and level/TA.
Instance
Cell
Related FG
0..100
Unit
N/A
Default Value
70
Related Parameters
SubCell1PsChanThs, SubCell1InThs
2-2169
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the restriction is satisfied, lower the threshold so that the access
load can be balanced as soon as possible.
The value of 80 is recommended for SubCell1PsChanThs. This
Reason
parameter should better be lower than SubCell1PsChanThs.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2.45.15 SubCell 2 high load threshold

Full Name
SubCell 2 high load threshold
Abbreviated Name
SubCell2HighThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the high load threshold for the initial
access to subcell 2. It works only when the SubCellLoadBalance is
turned On. During an initial access, it determines what sub-cell to
be allocated based on the load and level/TA.
Instance
Cell
Related FG
2-2170
SJ-20140527134815-013|2015-03-10(R1.1)
0..100
Unit
N/A
Default Value
70
Related Parameters
SubCell2PsChanThs,SubCell2InThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the restriction is satisfied, lower the threshold so that the access
load can be balanced as soon as possible.
The value of 80 is recommended for SubCell2PsChanThs. This
Reason
parameter should better be lower than SubCell2PsChanThs.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2.45.16 SubCell 1 handover in threshold

Full Name
SubCell 1 handover in threshold
Abbreviated Name
SubCell1InThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2171
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the thresholds of incoming handover

to subcell 1 for resource adjustment and congestion judgment.It
works only when SubCellLoadBalance is turned On. Resource
adjustment caused by wireless reasons is taken as the threshold for
incoming handover to the target sub-cell. For congestion judgment,
the congestion adjustment is triggered when the source sub-cell
rises above the busy threshold or the target sub-cell falls below
the incoming threshold.
Instance
Cell
Related FG
0..100
Unit
N/A
Default Value
40
Related Parameters
SubCell1PsChanThs,SubCell1HighThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the restriction is satisfied, lower the threshold so that the resource
adjustment load can be balanced as soon as possible.
A value lower than SubCell1HighThs is recommended.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2-2172
SJ-20140527134815-013|2015-03-10(R1.1)
2.45.17 SubCell 2 handover in threshold

Full Name
SubCell 2 handover in threshold
Abbreviated Name
SubCell2InThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the thresholds of incoming handover

to subcell 2 for resource adjustment and congestion judgment.It
works only when SubCellLoadBalance is turned On. Resource
adjustment caused by wireless reasons is taken as the threshold for
incoming handover to the target sub-cell. For congestion judgment,
the congestion adjustment is triggered when the source sub-cell
rises above the busy threshold or the target sub-cell falls below
the incoming threshold.
Instance
Cell
Related FG
0..100
Unit
N/A
Default Value
40
Related Parameters
SubCell2PsChanThs,SubCell2HighThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the restriction is satisfied, lower the threshold so that the resource
adjustment load can be balanced as soon as possible.
A value lower than SubCell2HighThs is recommended.
Reason
Change take effect
No
2-2173
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2.45.18 Load balance indication in CoBcch Cell

Full Name
Load balance indication in CoBcch Cell
Abbreviated Name
SubCellLoadBalance
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the load balance algorithm in

a CoBCCH cell. If it is set to 0, the algorithm used by the previous
versions applies to both the initial access and resource adjustment,
that is, the algorithm is based on only the load threshold of subcell 1.
If it is set to 1, a new load balance algorithm is used, which indicates
that the load of the initial access is balanced based on the high load
threshold of each subcell, and the congestion trigger is adjusted
based on the incoming and outgoing load threshold.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-2174
SJ-20140527134815-013|2015-03-10(R1.1)
This function should better be enabled to balance the 900M and
1800M loads.
Consistent with the previous version.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.103/V6.30.103
N/A
2.45.19 Initial access to subcell 2 RxLev threshold

Full Name
Initial access to subcell 2 RxLev threshold
Abbreviated Name
AssSC2RxLevThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial accessing level threshold of

subcell 2. If the accessing level is greater than or equal to this
threshold, the MS is allowed to access subcell 2.This parameter
is not related to the level threshold of resource adjustment from
subcell 1 to subcell 2, so it can be set independently.
Instance
Cell
Related FG
2-2175
SJ-20140527134815-013|2015-03-10(R1.1)
0: <-110
1: -110~-109
2: -109~-108
3: -108~-107
4: -107~-106
5: -106~-105
6: -105~-104
7: -104~-103
8: -103~-102
9: -102~-101
10: -101~-100
11: -100~-99
12: -99~-98
13: -98~-97
14: -97~-96
15: -96~-95
16: -95~-94
17: -94~-93
18: -93~-92
19: -92~-91
20: -91~-90
21: -90~-89
22: -89~-88
23: -88~-87
24: -87~-86
25: -86~-85
26: -85~-84
27: -84~-83
28: -83~-82
29: -82~-81
30: -81~-80
31: -80~-79
32: -79~-78
33: -78~-77
34: -77~-76
35: -76~-75
36: -75~-74
37: -74~-73
38: -73~-72
39: -72~-71
40: -71~-70
41: -70~-69
42: -69~-68
43: -68~-67
2-2176
SJ-20140527134815-013|2015-03-10(R1.1)
44: -67~-66
45: -66~-65
46: -65~-64
47: -64~-63
48: -63~-62
49: -62~-61
50: -61~-60
51: -60~-59
52: -59~-58
53: -58~-57
54: -57~-56
55: -56~-55
56: -55~-54
57: -54~-53
58: -53~-52
59: -52~-51
60: -51~-50
61: -50~-49
62: -49~-48
63: >-48
Unit
dBm
Default Value
40
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The lower the value of this parameter is, the easier the MS accesses
subcell 2. When subcell 2 is expected to take over more traffic

because the resources in subcell 2 are sufficient, you can decrease
the value of this parameter. If subcell 2 doesn't have many available
channels, you should not set this parameter to a low value. To
make initial access and resource adjustment to subcell 2 easier or
harder, you can set the value of this parameter to lower or higher
than PSALLOCSC[2] as required.
The default value is consistent with that of PSALLOCSC[2].
Reason
Change take effect
2-2177
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.45.20 Initial access to subcell 2 TA threshold

Full Name
Initial access to subcell 2 TA threshold
Abbreviated Name
AssSC2TAThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial accessing TA threshold of subcell

2. If the accessing TA is greater than or equal to this threshold, the
MS is allowed to access subcell 2.This parameter is not related to
the TA threshold of resource adjustment from subcell 1 to subcell 2,
so it can be set independently.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2178
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
The higher the value of this parameter is, the easier the MS
accesses subcell 2. When subcell 2 is expected to take over more

traffics because the resources in subcell 2 is sufficient, you can
increase the value of this parameter. If subcell 2 doesn't have many
available channels, you should not set this parameter to a high
value. To make initial access and resource adjustment to subcell 2
easier or harder, you can set the value of this parameter to lower or
higher than TaLevelThs2 as required.
The default value is consistent with that of TaLevelThs2.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.45.21 TRX idle percent threshold in subcell 2

Full Name
TRX idle percent threshold in subcell 2
Abbreviated Name
TrxPSBusyThsSC2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the TrxPSBusyThsBySC switch is enabled, this parameter

indicates the threshold to check whether the subcell 2 is idle.
When the percentage of idle resources in subcell 2 exceeds this
threshold, channels are allocated on this TRX; otherwise, channels
are allocated on the other TRXs in the current subcell.
Instance
Cell
2-2179
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
1..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When the traffic in subcell 2 is expected to be increased because
the resources in this subcell are sufficient and the service rate is to
be increased, you can enable the TrxPSBusyThsSC2 switch. To
make the channel multiplexing rate in subcell 2 lower than that in
subcell 1, you can set the value of TrxPSBusyThsSC2 lower than
that of TrxPSBusyThs.
The default values should be consistent with TrxPSBusyThs.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.45.22 TrxPSBusyThs by subcell

Full Name
TrxPSBusyThs by subcell
Abbreviated Name
TrxPSBusyThsBySC
Managed Object

2-2180
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether the

threshold for the percentage of idle resources is set based on
subcells. If the switch is enabled, the percentage of idle resources is
calculated based on subcells. TrxPSBusyThs is the threshold for the
percentage of idle resources in subcell 1, and TrxPSBusyThsSC2 is
the threshold for the percentage of idle resources in subcell 2.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
When subcell 2 is expected to take over more traffic because the
resources in subcell 2 are sufficient, and the service rate needs

to be increased, you can enable this switch. By adjusting the
TrxPSBusyThsSC2 parameter, you can obtain different channel
multiplexing rate in subcell 2 and subcell 1.
The default value of this parameter keeps the same with the version
Reason
that does not have such a switch. So the default value is set to 0.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
2-2181
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.201/V6.30.201
N/A
2.46 Power Control(GPowerControl)

2.46.1 Power Control ID
Full Name
Power Control ID
Abbreviated Name
GPowerControlId
Managed Object
Power Control(GPowerControl)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a power control ID.
Instance
BSC
Related FG
N/A
1..2
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
2-2182
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Restricted
OMC Access path

Information Configuration->Power Control
N/A
2.46.2 GSubCell DN
Full Name
GSubCell DN
Abbreviated Name
refGSubCell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter references the subcell DN.
Instance
Cell
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter must be configured in accordance with the radio
data planning.
The subcell structure is not used by default.
Reason
Change take effect
No
2-2183
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.46.3 Uplink level Sample count

Full Name
Uplink level Sample count
Abbreviated Name
pcUlLevWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The PcUlLevWindow parameter specifies the window size (the

number of samples) used to calculate the average uplink signal
strength.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2184
SJ-20140527134815-013|2015-03-10(R1.1)
To avoid the negative impact of burst measurement values resulting
from complicated radio transmission, the BTS, when making an

uplink power control decision, no longer uses the original uplink
measurement data but a series of average values of the uplink
measurement data.
The bigger the window is, the smoother the uplink measurement
report filtering is. The smaller the window is, the more sensitive the
measurement report filtering is.
Reason
ensure the accuracy of power control decisions. On the other hand,

to avoid call drops, the power control should be performed as early
as possible when the uplink level is weak.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.4 Uplink level Weight

Full Name
Uplink level Weight
Abbreviated Name
pcUlLevWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2185
SJ-20140527134815-013|2015-03-10(R1.1)
Description

timeslots in a measurement period in non-DTX mode, and the
other is the average of the measurement results of some special
timeslots in a measurement period in DTX mode. The BSC needs
to select one type of measurement data for calculating the average
value. The first type of measurement data is the average of the
The PcUlLevWeight parameter determines the weight for the first
type of measurement data in averaging uplink signal strength for
power control. The weight for the second type of measurement
data is set to 1 by default.
Instance
Cell
Related FG
1..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In the same period, there are many samples of FULL values, so
the result is accurate. There are few samples of SUB values, so

the result is less accurate. It is not recommended to modify this
parameter.
More precise
Reason
Change take effect
No
2-2186
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.46.5 Downlink level Sample count

Full Name
Downlink level Sample count
Abbreviated Name
pcDlLevWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

strength.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2187
SJ-20140527134815-013|2015-03-10(R1.1)

measurement data.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.6 Downlink level Weight

Full Name
Downlink level Weight
Abbreviated Name
pcDlLevWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2188
SJ-20140527134815-013|2015-03-10(R1.1)
Description

in a measurement period in DTX mode. The BSC needs to select
one type of measurement data for calculating the average value.
The PcdlLevWeight parameter determines the weight for the first
type of measurement data in averaging downlink signal strength for
Instance
Cell
Related FG
1..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

parameter.
More precise
Reason
Change take effect
No
2-2189
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
pcUlQualWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

strength.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2190
SJ-20140527134815-013|2015-03-10(R1.1)

measurement data.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.8 Uplink quality Weight

Full Name
Uplink quality Weight
Abbreviated Name
pcUlQualWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The PcUlIQualWeight parameter determines the weight for the first

type of measurement data in averaging uplink signal quality for
Instance
Cell
Related FG
2-2191
SJ-20140527134815-013|2015-03-10(R1.1)
1..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

parameter.
More precise
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
pcDlQualWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2192
SJ-20140527134815-013|2015-03-10(R1.1)
Description
The pcDlQualWindow parameter specifies the window size (the

number of samples) used to calculate the average downlink signal
quality.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
from complicated radio transmission, the BTS, when making a

downlink power control decision, no longer uses the original uplink
measurement data.

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2193
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.10 Downlink quality Weight

Full Name
Downlink quality Weight
Abbreviated Name
pcDlQualWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The PcDlIQualWeight parameter determines the weight for the first

type of measurement data in averaging downlink signal quality for
Instance
Cell
Related FG
1..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

parameter.
More precise
Reason
Change take effect
No
Access
Read/Write
2-2194
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.46.11 Uplink power control allowed

Full Name
Uplink power control allowed
Abbreviated Name
pwrControlUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The power control objects can be specified according to specific

network requirements. This parameter is enabled if it is necessary
to dynamically adjust the transmission power of an MS.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
FastAvg
Enabling the fastavg function helps speed up the process of power
Parameters
control during initial access.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-2195
SJ-20140527134815-013|2015-03-10(R1.1)
When this parameter is set to 1, the uplink interference and the
power consumption of the MS can be decreased. It is recommended

to enable this feature in scenarios other than high-speed rail and
expressway.
Enabling this feature helps the BTS obtain stable received signal
strength, decreases uplink co-channel and adjacent channel
interference, and reduces the power consumption of the MS.
Delayed uplink power control or inappropriate parameter
configuration may cause voice quality degradation and even call
drops.
For an SDR BTS, it is recommended to enable the fastavg function
because it may take some time to control power during initial access.
The default value is set to allow the output power of an MS to
Reason
be adjusted, which helps the BTS obtain stable received signal

strength, decreases uplink co-channel and adjacent channel
interference, and reduces the power consumption of the MS.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.12 Downlink power control allowed

Full Name
Downlink power control allowed
Abbreviated Name
pwrControlDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The power control objects can be specified according to specific

network requirements. This parameter is enabled if it is necessary
to dynamically adjust the transmission power of the BTS.
2-2196
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
FastAvg
PwrDynShare
1. Enabling the fastavg function helps speed up the process of
Parameters
power control during initial access.

2. The PwrDynShare parameter can be configured for an SDR BTS
only when the pwrControlDl parameter is set to 1.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
When this parameter is set to 1, the interference in the downlink
and the power consumption of the BTS can be decreased. It

is recommended to enable this feature in scenarios with strong
network interference, for example, high-traffic urban areas.
Enabling this feature helps the MSs obtain stable received signal
strength, decreases downlink co-channel and adjacent channel
interference, and reduces the power consumption of the BTS.
Delayed downlink power control or inappropriate parameter
configuration may cause voice quality degradation and even call
drops.
For an SDR BTS, it is recommended to enable the fastavg function
because it may take some time to control power during initial access.
The default value is set to allow the BTS to transmit signals at the
Reason
maximum power level, which helps increase the signal coverage

and downlink receive level.
Change take effect
No
Access
Read/Write
OMC Access path

2-2197
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.46.13 Increase step of uplink power control

Full Name
Increase step of uplink power control
Abbreviated Name
pwrIncStep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step for power control increase. There
are four types of uplink and downlink power control steps: FR, HR,
AMR FR, and AMR HR.
Instance
Cell
Related FG
0: 2dB
1: 4dB
2: 6dB
Unit
dB
Default Value
[1,1,1,1,1,1,1]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too low, the uplink power increases too
slowly, resulting in voice quality degradation or even call drops.
The default value is set based on the principle of quick increase
Reason
and slow decrease.
Change take effect
No
2-2198
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.14 Decrease step of uplink power control

Full Name
Decrease step of uplink power control
Abbreviated Name
pwrRedStep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step for power control decrease. There
are four types of uplink and downlink power control steps: FR, HR,
AMR FR, and AMR HR.
Instance
Cell
Related FG
0: 2dB
1: 4dB
2: 6dB
Unit
dB
Default Value
[0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2199
SJ-20140527134815-013|2015-03-10(R1.1)
If this parameter is set too large, the fluctuation of uplink power
decrease may be great and call drops may occur in special cases.
The default value is set based on the principle of quick increase
Reason
and slow decrease.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.15 Increase uplink level Threshold

Full Name
Increase uplink level Threshold
Abbreviated Name
pcUlInclLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter can be classified into seven types: FR, HR, AFS,
AHS, FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB. It can
control various voice versions. The uplink received signal strength
is one of the causes for uplink power increase of an MS. In the
N averages of the recently received signal strength values in the
uplink, if the P averages are less than the threshold, the uplink
transmission power of the MS should be increased because the
uplink signal strength is too weak.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
[22,22,22,22,22,22,22]
2-2200
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this threshold is set too small, the uplink received signal strength
may be too low, resulting in voice quality degradation or even call

drops. If this threshold is set too large, the uplink interference
may be strong. In the scenarios with weak indoor signals, it is
recommended to increase this threshold appropriately to avoid voice
quality degradation due to fast signal attenuation.
The default value is set because the uplink signal strength from 88
Reason
dBm to 80 dBm can generally ensure reliable CS services without

uplink interference.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.16 Decrease uplink level Threshold

Full Name
Decrease uplink level Threshold
Abbreviated Name
pcUlRedLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2201
SJ-20140527134815-013|2015-03-10(R1.1)
Description
is one of the causes for uplink power decrease of an MS. In the N
averages of the recently uplink received signal strength values, if the
P averages are greater than the threshold, the uplink transmission
power of the MS should be decreased because the uplink signal
strength is too strong.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
[30,30,30,30,30,30,30]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too small, the power of an MS may be
decreased when the uplink received signal strength is low. If this

parameter is set too large, the uplink interference may be strong
because the uplink received signal strength is too high. In the
scenarios with weak indoor signals, it is recommended to increase
this threshold appropriately to avoid voice quality degradation due
to fast signal attenuation.
The default value is set because the uplink signal strength from 88
Reason
dBm to 80 dBm can generally ensure reliable CS services without

uplink interference.
Change take effect
No
Access
Read/Write
OMC Access path


2-2202
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.46.17 Increase uplink quality Threshold

Full Name
Increase uplink quality Threshold
Abbreviated Name
pcUlInclQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
control various voice versions. The uplink received signal quality
N averages of the recently received signal quality levels in the
uplink, if the P averages are greater than the threshold, the uplink
uplink signal quality is too poor.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2203
SJ-20140527134815-013|2015-03-10(R1.1)
If this parameter is set too large, call drops may occur due to poor
received signal quality of an MS and the percentage of downlink RQ

may be affected. If this parameter is set too small, the interference
may be strong due to power rise of an MS in case of even a minor
disturbance.
The quality level threshold range can be adjusted based on the
actual wireless environment in the uplink and downlink. If the
wireless environment is bad, the quality level threshold range
can be adjusted from 0 to 1. However, the transmission power of
uplink signals and interference among signals may rise with the
increase of the quality level threshold. In this case, the percentage
of RQ0RQ3 is still high due to power control. During parameter
setting optimization, it is necessary to strike a balance among the
percentage increase of RQ0RQ3, power rise, and interference
increase.
The default value is set because the signal quality level from 0 to 2
Reason
can generally ensure normal CS voice quality.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.18 Decrease uplink quality Threshold

Full Name
Decrease uplink quality Threshold
Abbreviated Name
pcUlRedQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2204
SJ-20140527134815-013|2015-03-10(R1.1)
Description
control various voice versions. The uplink received signal quality is
one of the causes for uplink power decrease of an MS. In the N
averages of the recently received signal quality levels in the uplink, if
the P averages are less than the threshold, the uplink transmission
quality is very good.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
[0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too large, the signal quality may be poor and
call drops may occur because the power fails to be increased in

case of interference. Therefore, it is not recommended to modify the
default value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2205
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.19 Increase downlink level Threshold

Full Name
Increase downlink level Threshold
Abbreviated Name
pcDlInclLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
control various voice versions. The downlink received signal
strength is one of the causes for downlink power increase of the
BTS. In the N averages of the recently downlink received signal
strength values, if the P averages are less than the threshold,
the downlink transmission power of the BTS should be increased
because the downlink signal strength is too low.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
[32,32,32,32,32,32,32]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too small, the MS received signal strength
may be too low and MS power control may not occur. If this
parameter is set too large, the downlink interference may be strong.
If the site has specific requirements on downlink coverage level, the
downlink power control strength threshold should be increased. For
the site with the downlink coverage level of 75 dBm, for example,
it is recommended to modify the parameters dlIncPSPwrThr and
dlDecPSPwrThr to 36 and 42 respectively.
2-2206
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is set because the signal strength from -78 dBm to
Reason
-68 dBm can generally ensure reliable CS services.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.20 Decrease downlink level Threshold

Full Name
Decrease downlink level Threshold
Abbreviated Name
pcDlRedLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
strength is one of the causes for downlink power decrease of the
strength values, if the P averages are greater than the threshold,
the downlink transmission power of the BTS should be decreased
because the downlink signal strength value is too high.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
[42,42,42,42,42,42,42]
Related Parameters
N/A
2-2207
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too small, the MS received signal strength
may be too low and MS power control may not occur. If this
parameter is set too large, the downlink interference may be strong.
If the site has specific requirements on downlink coverage level, the
downlink power control strength threshold should be increased. For
the site with the downlink coverage level of 75 dBm, for example,
it is recommended to modify the parameters dlIncPSPwrThr and
dlDecPSPwrThr to 36 and 42 respectively.
The default value is set because the signal strength from -78 dBm to
Reason
-68 dBm can generally ensure reliable CS services.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.21 Increase downlink quality Threshold

Full Name
Increase downlink quality Threshold
Abbreviated Name
pcDlInclQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2208
SJ-20140527134815-013|2015-03-10(R1.1)
Description
control various voice versions. The downlink received signal quality
is one of the causes for downlink power increase of the BTS. In
the N averages of the recently received signal quality levels in
the downlink, if the P averages are greater than the threshold,
because the downlink signal quality is too poor.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
[1,1,1,1,1,1,1]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too large, call drops may occur due to poor
received signal quality of an MS and the percentage of downlink RQ

may be affected. If this parameter is set too small, the downlink RQ
may be further deteriorated due to power rise of the BTS in case of
even a minor disturbance.
The quality level threshold range can be adjusted based on the
actual wireless environment in the uplink and downlink. If the
wireless environment is bad, the quality level threshold range
can be adjusted from 0 to 1. However, the transmission power of
uplink/downlink signals and interference among signals (especially
downlink interference) may rise with the increase of the quality level
threshold. In this case, the percentage of RQ0RQ3 is still high
due to power control. During parameter setting optimization, it is
necessary to strike a balance among the percentage increase of
RQ0RQ3, power rise, and interference increase.
Reason
Change take effect
No
2-2209
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.22 Decrease downlink quality Threshold

Full Name
Decrease downlink quality Threshold
Abbreviated Name
pcDlRedQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
is one of the causes for downlink power decrease of the BTS. In
the N averages of the recently received signal quality levels in the
downlink, if the P averages are less than the threshold, the downlink
transmission power of the BTS should be decreased because the
downlink signal quality is very good.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
[0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
2-2210
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
If this parameter is set too large, the signal quality may be poor and
call drops may occur because the power fails to be increased in

case of interference. Therefore, it is not recommended to modify the
default value.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.23 Increase uplink level Value P

Full Name
Increase uplink level Value P
Abbreviated Name
pcUlInclLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
is one of the causes for uplink power increase of an MS. In the N
averages of the recently uplink received signal strength values, if
power of the MS should be increased because the uplink signal
strength is too weak.
Instance
Cell
Related FG
1..31
2-2211
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the values of N and P are large, the BTS samples more levels to
obtain the average. In this case, the accuracy may be increased

because blur can be filtered out, but the sensitivity may be
decreased. Generally, the values of N and P that cause power
increase are set to be less than those that cause power decrease. If
the level is weak, power can be increased more quickly.
The default value is set to ensure both the accuracy and sensitivity
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.24 Increase uplink level Value N

Full Name
Increase uplink level Value N
Abbreviated Name
pcUlInclLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2212
SJ-20140527134815-013|2015-03-10(R1.1)
Description
is one of the causes for uplink power increase of an MS. In the N
averages of the recently uplink received signal strength values, if
power of the MS should be increased because the uplink signal
strength is too weak.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased. Generally, the values of N and P that cause power
increase are set to be less than those that cause power decrease. If
the level is weak, power can be increased more quickly.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2213
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.25 Increase downlink level Value P

Full Name
Increase downlink level Value P
Abbreviated Name
pcDlInclLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Generally, the values of N and P that cause power increase are set
to be less than those that cause power decrease. If the level is
weak, power can be increased more quickly.
Reason
of power control.
2-2214
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.26 Increase downlink level Value N

Full Name
Increase downlink level Value N
Abbreviated Name
pcDlInclLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
2-2215
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Generally, the values of N and P that cause power increase are set
to be less than those that cause power decrease. If the level is
weak, power can be increased more quickly.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.27 Decrease uplink level Value P

Full Name
Decrease uplink level Value P
Abbreviated Name
pcUlRedLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2216
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2217
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.28 Decrease uplink level Value N

Full Name
Decrease uplink level Value N
Abbreviated Name
pcUlRedLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Reason
of power control.
Change take effect
No
2-2218
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.29 Decrease downlink level Value P

Full Name
Decrease downlink level Value P
Abbreviated Name
pcDlRedLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
because the downlink signal strength is too strong.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
2-2219
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No

decreased.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.30 Decrease downlink level Value N

Full Name
Decrease downlink level Value N
Abbreviated Name
pcDlRedLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
because the downlink signal strength is too strong.
Instance
Cell
Related FG
1..31
2-2220
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.31 Increase uplink quality Value P

Full Name
Increase uplink quality Value P
Abbreviated Name
pcUlInclQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2221
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Generally, the values of N and P that cause power increase are
set to be less than those that cause power decrease. If the signal
quality is poor, power can be increased soon.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-2222
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.46.32 Increase uplink quality Value N

Full Name
Increase uplink quality Value N
Abbreviated Name
pcUlInclQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2223
SJ-20140527134815-013|2015-03-10(R1.1)

decreased.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.33 Increase downlink quality Value P

Full Name
Increase downlink quality Value P
Abbreviated Name
pcDlInclQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2-2224
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.34 Increase downlink quality Value N

Full Name
Increase downlink quality Value N
Abbreviated Name
pcDlInclQualN
Managed Object
2-2225
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Reason
of power control.
Change take effect
No
Access
Read/Write
2-2226
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.35 Decrease uplink quality Value P

Full Name
Decrease uplink quality Value P
Abbreviated Name
pcUlRedQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2227
SJ-20140527134815-013|2015-03-10(R1.1)

decreased.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.36 Decrease uplink quality Value N

Full Name
Decrease uplink quality Value N
Abbreviated Name
pcUlRedQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
1..31
Unit
N/A
2-2228
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
[3,3,3,3,3,3,3]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.37 Decrease downlink quality Value P

Full Name
Decrease downlink quality Value P
Abbreviated Name
pcDlRedQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2229
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Reason
of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2230
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.38 Decrease downlink quality Value N

Full Name
Decrease downlink quality Value N
Abbreviated Name
pcDlRedQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No

decreased.
Reason
of power control.
Change take effect
No
2-2231
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.39 MAX power level of MS

Full Name
MAX power level of MS
Abbreviated Name
msTxPwrMax
Managed Object
3GPP Name
MS_TXPWR_MAX_CCH
3GPP Reference
N/A
Description

used for power control, and the other is the timing advance value).
maximum transmission power available for an MS in the cell. In
addition, this parameter is used for the BSC to calculate PBGT.
There are four types of maximum power levels for an MS, FR, HR,
AMR FR, and AMR HR.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
[5,5,5,5,5,5,5]
Related Parameters
N/A
2-2232
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the initial transmission power of an MS is set too small, some
KPIs, such as the success rate of TCH and SD, may be affected
because the uplink receive level is too weak. Therefore, it is not
A small value can meet the requirements of normal MS access and
reduce the uplink interference only when the wireless environment
is good.
The default value is set to maximize the initial transmission power
Reason
of an MS.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.40 MIN power level of MS

Full Name
MIN power level of MS
Abbreviated Name
msTxPwrMin
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2233
SJ-20140527134815-013|2015-03-10(R1.1)
Description

used for power control, and the other is the timing advance value).
minimum transmission power (lower threshold of power control)
available for an MS in the cell. There are four types of minimum
power levels for an MS, FR, HR, AMR FR, and AMR HR.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
[16,16,16,16,16,16,16]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too small, the uplink received signals may be
too weak. If this parameter is set too large, the power consumption
of an MS may increase and the uplink interference may be strong
due to large MS transmission power.
In a bad wireless environment, this parameter should be set to a
larger value to ensure good uplink received signal strength.
The default value is set to ensure both the uplink level and power
Reason
consumption of an MS.
Change take effect
No
Access
Read/Write
2-2234
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.46.41 MIN power level of BS

Full Name
MIN power level of BS
Abbreviated Name
bsTxPwrMin
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
During the communication between an MS and the BTS, the BTS

the power for the BTS. The BTS must use the transmission power
specified by the network as its output power. During BSC power
control, this parameter determines the minimum transmission power
available for the BTS in the cell.
The maximum power level of the BTS is Pn, then:
l 0: Pn;
l 1: Pn-2 dB;
......
l 15: Pn-30 dB
Instance
Cell
Related FG
0..15
Unit
N/A
Default Value
[10,10,10,10,10,10,10]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2235
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter indicates an adjustment range of the BTS power. A
smaller value may help decrease the downlink interference.
The default value is set to enable the power of the BTS to be
Reason
adjusted within a range with higher power values.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.42 Uplink rapid power control

Full Name
Uplink rapid power control
Abbreviated Name
ulRapidPcInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the rapid power control process.

The rapid power control process is one of the optional functions of
the BSC. It reduces the interference in the whole BSS radio system
and satisfies the dynamic power control requirement of an MS
during its rapid moving.
The power control range in each rapid power control process is
not a fixed value but an integral multiple of the power control step
(increment or decrement). The RapidPc parameter determines
whether the rapid power control process is enabled.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
2-2236
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
An instant adjustment can be made based on the difference between
the received signal level/quality value and desired threshold. The

power control range in each rapid power control process is not a
fixed value but an integral multiple of the power control step. In
this way, the dynamic power control requirement of an MS can
be satisfied during its rapid moving, but the received signals may
be unstable due to the sharp increase or decrease of BTS or MS
transmission power.
The default value is set to quickly adjust the MS power to reduce
Reason
interference and to help the BTS obtain a steady receive level.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.43 Downlink rapid power control

Full Name
Downlink rapid power control
Abbreviated Name
dlRapidPcInd
Managed Object
3GPP Name
N/A
2-2237
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter enables or disables the rapid power control process.

The rapid power control process is one of the optional functions of
the BSC. It reduces the interference in the whole BSS radio system
and satisfies the dynamic power control requirement of an MS
during its rapid moving.
The power control range in each rapid power control process is
not a fixed value but an integral multiple of the power control step
(increment or decrement). The RapidPc parameter determines
whether the rapid power control process is enabled.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
In this way, the dynamic power control requirement of an MS can be
satisfied during its rapid moving, but the received signals may be
unstable due to the BTS transmission power level being adjusted
too quickly.
The default value is set to ensure good downlink RQ.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2238
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.46.44 MIN interval of power control

Full Name
MIN interval of power control
Abbreviated Name
pcMinInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
For an SDR BTS, this parameter indicates the interval for the state
transition of BTS power control from initial state to stable state.
This parameter specifies the minimum interval for power control.
Usually, an MS still sends two measurement reports with the original
transmission power to the BSC after enabling the power control.
Signal level information contained in the reports is inaccurate and
can be ignored (information such as neighbor cell information is still
valid). Therefore, there should be a minimum interval for power
control, and signal level information during this interval can be
ignored.
For a BTS (V3), this parameter indicates the interval for the state
Instance
Cell
Related FG
1..32
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2239
SJ-20140527134815-013|2015-03-10(R1.1)
For an SDR BTS, the two inaccurate measurement reports are
discarded between two uplink power controls. It is not recommended

to modify this parameter.
For a BTS (V3), it is not recommended to modify this parameter.
For an SDR BTS, the default value is set to discard inaccurate
Reason
measurement reports and ensure the accuracy of power control.

For a BTS (V3), the default value is set to ensure both the accuracy
of power control and the pace of initial power control.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.45 Power control PwrDecrLimit

Full Name
Power control PwrDecrLimit
Abbreviated Name
pwrDecrLimit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is set for preventing an MS from call drop due

to fast power control. It corresponds to different quality levels.
For example, PwrDecrLimit [0] determines the maximum power
decrease limit for calls with receiving quality level 0 (Bit Error Rate
(BER) < 0.2%). This parameter is valid for both uplink and downlink.
Instance
Cell
Related FG
0..38
Unit
N/A
2-2240
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
[24,22,20,18,16,14,12,10]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too large, call drops may occur due to a big
change in power. If this parameter is set too small, power control

may be less effective due to low sensitivity of power adjustment.
For rapid power control, a middle value is taken to ensure the pace of
Reason
power control and to prevent the power from decreasing too quickly.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.46 Report period of measurement for power control

Full Name
Report period of measurement for power control
Abbreviated Name
pwrCtrlReportPrd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2241
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Power control is performed at the BTS side and the BSC

implements relevant performance statistics. Therefore, the BTS
must periodically send power control statistics to the BSC for power
control analysis. This parameter indicates the frequency at which
the BTS reports performance measurement results of power control
to the iBSC. This parameter is in units of SACCH multi-frames.
Instance
Cell
Related FG
1..254
Unit
51 mf
Default Value
240
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. A larger value indicates a larger
time granularity and reflects average power control over a period. A

smaller value reflects instant power control over a period.
The BTS reports performance measurement results of power control
Reason
to the iBSC each 240 51-multi-frames or 26 multi-frames.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.47 BCCH power control downlink

2-2242
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
BCCH power control downlink
Abbreviated Name
BCCHPwrControlDL
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to implement power control over

the dedicated channel on the BCCH carrier according to various
network requirements.
Instance
Cell
Related FG
ZGO-04-04-008 Intelligent BCCH Power Reduction
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is up to users to determine whether to enable this parameter.
When this parameter is set to 1, the power consumption of the BTS

can be decreased. With this parameter enabled, the cell reselection
of an MS and handover decision by the BSC may be affected due to
a low downlink level measured by the MS.
The default value indicates that downlink power control is not
Reason
implemented over the BCCH carrier to ensure that an MS correctly

measures the downlink level of the cell.
Change take effect
No
Access
Read/Write
2-2243
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.46.48 BCCH maxim power decrease

Full Name
BCCH maxim power decrease
Abbreviated Name
BCCHMaxPwrDec
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the BCCH carrier participates in downlink power control, this

parameter specifies the maximum attenuation value of the dedicated
channel on the BCCH carrier.
Instance
Cell
Related FG
0..60
Unit
0.5db
Default Value
Related Parameters
BCCHPwrControlDL
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is effective only when the BCCHPwrControlDL
parameter is set to 1.
If this parameter is set too large, the downlink level of the local cell
measured by the MSs in the local cell and neighbor cells may be
too low.
2-2244
SJ-20140527134815-013|2015-03-10(R1.1)
The value of this parameter determines the range of downlink BCCH
Reason
power control. Therefore, the default value is set to ensure proper

power control.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.49 BCCH idle burst power

Full Name
BCCH idle burst power
Abbreviated Name
BCCHIdleBurstPwr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to decrease the output power

value of the idle slots on the BCCH carrier according to various
network requirements.
Instance
Cell
Related FG
0: Not to cut power output

1: 0.5dB
2: 1dB
3: 1.5dB
4: 2dB
5: 2.5dB
6: 3dB
7: 3.5dB
8: 4dB
9: 4.5dB
10: 5dB
2-2245
SJ-20140527134815-013|2015-03-10(R1.1)
11: 5.5dB
12: 6dB
13: 6.5dB
14: 7dB
15: 7.5dB
16: 8dB
17: 8.5dB
18: 9dB
19: 9.5dB
20: 10dB
21: 10.5dB
22: 11dB
23: 11.5dB
24: 12dB
25: 12.5dB
26: 13dB
27: 13.5dB
28: 14dB
29: 14.5dB
30: 15dB
31: 15.5dB
32: 16dB
33: 16.5dB
34: 17dB
35: 17.5dB
36: 18dB
37: 18.5dB
38: 19dB
39: 19.5dB
40: 20dB
41: 20.5dB
42: 21dB
43: 21.5dB
44: 22dB
45: 22.5dB
46: 23dB
47: 23.5
48: 24dB
49: 24.5dB
50: 25dB
51: 25.5dB
52: 26dB
53: 26.5dB
54: 27dB
2-2246
SJ-20140527134815-013|2015-03-10(R1.1)
55: 27.5dB
56: 28dB
57: 28.5dB
58: 29dB
59: 29.5dB
60: 30dB
61: Turn off power
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is up to users to determine whether to decrease the output power
value of the idle slots on the BCCH carrier.

Decrease of the output power value of the idle slots on the BCCH
carrier helps reduce the power consumption of the BTS. If this
parameter is set too large, the cell reselection of an MS and
handover decision of the BSC may be affected due to low downlink
level measured by the MS.
The default value indicates that the output power value of the idle
Reason
slots on the BCCH carrier is not decreased to ensure that an MS

correctly measures the level of the cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2247
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.50 Uplink exponential filter

Full Name
Uplink exponential filter
Abbreviated Name
ULExpFilter
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the uplink level and quality are
processed through exponential filtering during uplink power control
and whether the uplink power control decision is made with the
processed data.
Instance
Cell
Related FG
ZGO-04-02-018 Enhanced Dynamic Power Control
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Exponential filtering helps prevent the jittering of power control due
to the decreased impact on the latest measurement samples, but

may decrease the sensitivity of power control.
Exponential filtering helps eliminate burr, but cannot adapt to the
Reason
sharp fluctuation of radio environments. By default, this parameter

is disabled.
Change take effect
No
Access
Read/Write
2-2248
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.46.51 Downlink exponential filter

Full Name
Downlink exponential filter
Abbreviated Name
DLExpFilter
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the downlink level and quality

are processed through exponential filtering during downlink power
control and whether the downlink power control decision is made
with the processed data.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Exponential filtering helps prevent the jittering of power control due
to the decreased impact on the latest measurement samples, but

may decrease the sensitivity of power control.
2-2249
SJ-20140527134815-013|2015-03-10(R1.1)
Exponential filtering helps eliminate burr, but cannot adapt to the
Reason
sharp fluctuation of radio environments. By default, this parameter

is disabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.52 Uplink level optimize

Full Name
Uplink level optimize
Abbreviated Name
ULLevOptim
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to use the optimized uplink level

as the expected level for uplink power control. The optimized uplink
level is a value between the threshold of uplink power increase and
the threshold of uplink power decrease.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2250
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Enabling this parameter can prevent ping-pong power control
caused by an inappropriate level.
This parameter is set to 0 by default. If it is set to 1, it helps prevent
Reason
extra power control caused by a close value between the target

level and the threshold of power increase or the threshold of power
decrease.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.53 Downlink level optimize

Full Name
Downlink level optimize
Abbreviated Name
DLLevOptim
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to use the optimized downlink level

as the expected level for downlink power control. The optimized
downlink level is a value between the threshold of downlink power
increase and the threshold of downlink power decrease.
Instance
Cell
Related FG
0: Off
1: On
2-2251
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Enabling this parameter can prevent ping-pong power control
caused by an inappropriate level.
This parameter is set to 0 by default. If it is set to 1, it helps prevent
Reason
extra power control caused by a close value between the target

level and the threshold of power increase or the threshold of power
decrease.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.54 Minimize Interval of downlink power control

Full Name
Minimize Interval of downlink power control
Abbreviated Name
DLPcMinInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2252
SJ-20140527134815-013|2015-03-10(R1.1)
Description
For an SDR BTS, this parameter indicates the interval for the state
This parameter specifies the minimum interval for power control.
Usually, an MS still sends two measurement reports with the original
transmission power to the BSC after enabling the power control.
Signal level information contained in the reports is inaccurate and
can be ignored (information such as neighbor cell information is still
valid). Therefore, there should be a minimum interval for power
control, and signal level information during this interval can be
ignored.
For a BTS (V3), this parameter indicates the interval for the state
Instance
Cell
Related FG
1..32
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
The two inaccurate measurement reports are discarded between
two uplink power controls.
The default value is set to discard inaccurate measurement reports
Reason
and ensure the accuracy of power control.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2253
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.55 Increase step of downlink power control

Full Name
Increase step of downlink power control
Abbreviated Name
DLPwrIncStep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step for power control increase in the
downlink direction and can be classified into four types: FR, HR,
AMR FR, and AMR HR.
Instance
Cell
Related FG

1: 0.5dB
2: 1dB
4: 2dB
8: 4dB
12: 6dB
Unit
N/A
Default Value
[8,8,8,8,8,8,8]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too small, the downlink power increase may
take long time, resulting in voice quality degradation or even call

drops. Therefore, this parameter cannot be set to a too small value.

Reason
The default value is set to 1 (0.5 dB) to achieve smaller granularity

when the pwrDynShare parameter is set to 1. If the pwrDynShare
parameter is set to 0, it is recommended to set this parameter to
46 dB (the power increase step is slightly more than the power
decrease step) to avoid poor call quality and even call drops.
Change take effect
2-2254
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.56 Decrease step of downlink power control

Full Name
Decrease step of downlink power control
Abbreviated Name
DLPwrRedStep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step for power control decrease in the
downlink direction and can be classified into four types: FR, HR,
AMR FR, and AMR HR.
Instance
Cell
Related FG

1: 0.5dB
2: 1dB
4: 2dB
8: 4dB
12: 6dB
Unit
N/A
Default Value
[4,4,4,4,4,4,4]
Related Parameters
N/A
N/A
Parameters
Value Type
long[7]
Parameter Type
2-2255
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
If this parameter is set too large, the fluctuation of downlink power
decrease may be great and call drops may occur in special cases.
The default value is set to 1 (0.5 dB) to achieve smaller granularity
Reason
when the pwrDynShare parameter is set to 1. If the pwrDynShare

parameter is set to 0, it is recommended to set this parameter to 4
(2 dB).
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.46.57 Urgent Rescue Switch

Full Name
Urgent Rescue Switch
Abbreviated Name
UrgentRescueInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the urgent rescue function is

enabled for uplink/downlink level and quality. The urgent rescue
function is optional. By improving the power rapidly when the level
or quality is too low, this function decreases the proportion of low
level and low quality signals in the entire network.
Instance
Cell
Related FG
N/A
0: No
1: Yes
2-2256
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The purpose of urgent rescue is to rapidly increase the power when
the level or quality is too low. It is recommended to enable this

function.
The urgent rescue function is enabled by default to improve the
Reason
power rapidly in case of too low level or quality and guarantee the
quality of calls.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.58 Uplink Initial State Effectively Switch

Full Name
Uplink Initial State Effectively Switch
Abbreviated Name
ULINITStateInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2257
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines whether the initial state is enabled during

uplink power control. The uplink initial state is optional. The transmit
power of an MS can be rapidly reduced for resource saving when
the uplink initial state is enabled.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The purpose of the initial state for uplink power control to rapidly
reduce the transmit power of an MS for resource saving. It is

recommended to enable the initial state.

Reason
The uplink initial state is enabled by default to rapidly reduce the

transmit power of an MS in the early stage of a call, which results in
a reduction of power consumption.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.59 Initial State MR Number

2-2258
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Initial State MR Number
Abbreviated Name
PcINITMRNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
If the uplink initial state is enabled, the channel power control is in

initial state. After the power is reduced once, or a certain number of
measurement reports indicating no power reduction are received,
a common power control procedure is initiated. This parameter
indicates the number of measurement reports indicating no power
reduction.
Instance
Cell
Related FG
N/A
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the parameter value is, the longer the initial state persists
when the uplink power does not decrease.
This default value is set according to test results.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-2259
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.46.60 High Level High Quality Effectively Switch

Full Name
High Level High Quality Effectively Switch
Abbreviated Name
GoodLevBadQuaInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch that determines whether the power keeps

unchanged in case of high level and high quality when a power
control decision is made. If this switch is turned off, the power is
increased in case of high level and high quality.
Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
High level and high quality (poor quality) may be caused by
co-channel interference. An increase of the power makes the

problem worse. It is recommended to turn on this switch to keep the
power level unchanged.
This default value is set to keep the power level unchanged in case
Reason
of high level and high quality caused by co-channel interference.
Change take effect
No
2-2260
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.61 Uplink Exponential Filter Cycle

Full Name
Uplink Exponential Filter Cycle
Abbreviated Name
PcULExpFiltCycleK
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
During uplink exponential filtering, the weight of the current

measurement report is 1-a, where the value of a is determined by
the uplink exponential filtering cycle K. This parameter indicates the
uplink exponential filtering cycle K. If K=0, a=0. If K>0, a=1/(2^(K/2)).
Instance
Cell
Related FG
N/A
0..31
Unit
N/A
Default Value
Related Parameters
R_BTS.UseUniformPwrCtrl
This parameter is effective when R_BTS.UseUniformPwrCtrl is set
Parameters
to 1.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The longer the cycle is, the smaller the value of a is and the higher
weight the current measurement report has.
2-2261
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.62 Downlink Exponential Filter Cycle

Full Name
Downlink Exponential Filter Cycle
Abbreviated Name
PcDLExpFiltCycleK
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
During downlink exponential filtering, the weight of the current

measurement report is 1-a, where the value of a is determined by
the downlink exponential filtering cycle K. This parameter indicates
the downlink exponential filtering cycle K. If K=0, a=0. If K>0,
a=1/(2^(K/2)).
Instance
Cell
Related FG
N/A
0..31
Unit
N/A
Default Value
Related Parameters
Parameters
to 1.
Value Type
long
2-2262
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
The longer the cycle is, the smaller the value of a is and the higher
weight the current measurement report has.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.63 Uplink Window Filter Weight Sequence

Full Name
Uplink Window Filter Weight Sequence
Abbreviated Name
PcULWinFiltWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the weight sequence of measurement

reports for weighted filtering in the uplink measurement report
window. PcULWinFiltWeight[0] indicates the weight of the first
measurement report in the window, PcULWinFiltWeight[1] indicates
the weight of the second measurement report in the window, and
so on.
Instance
Cell
Related FG
N/A
0..32
Unit
N/A
2-2263
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
[1,3,5,7,9,11,13,15]
Related Parameters
Parameters
to 1.
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the value of an element is, the higher the weight of the
corresponding measurement report is in the filtering window during

uplink power control.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.64 Downlink Window Filter Weight Sequence

Full Name
Downlink Window Filter Weight Sequence
Abbreviated Name
PcDLWinFiltWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2264
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the weight sequence of measurement

reports for weighted filtering in the downlink measurement report
window. PcDLWinFiltWeight[0] indicates the weight of the first
measurement report in the window, PcDLWinFiltWeight[1] indicates
the weight of the second measurement report in the window, and
so on.
Instance
Cell
Related FG
N/A
0..32
Unit
N/A
Default Value
[1,3,5,7,9,11,13,15]
Related Parameters
Parameters
to 1.
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the value of an element is, the higher the weight of the
corresponding measurement report is in the filtering window during

downlink power control.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.65 Uplink Level Urgent Rescue Threshold

2-2265
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Uplink Level Urgent Rescue Threshold
Abbreviated Name
PcULRescueLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink level threshold used for urgent
rescue decision. When the uplink Rx level in a measurement report
is lower than this threshold, a power control decision for urgent
rescue is made. This parameter can be applied to individual FR,
HR, AFS, AHS, WFS, OWFR, and OWHR versions.
Instance
Cell
Related FG
N/A
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
[20,20,20,20,20,20,20]
Related Parameters
R_POC.PcUlInclLevThs
R_HOC.HoUlLevThs
Parameters
to 1.
R_HOC.HoUlLevThs PcULRescueLevThs R_POC.PcUlInclLevThs
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher the threshold is, the more likely an urgent rescue for
uplink level is triggered and the lower the proportion of low level
in the entire network is.
Generally, the quality of a CS call may be influenced when the uplink
Reason
signal strength is lower than -90 dBm.
Change take effect
No
2-2266
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.66 Downlink Level Urgent Rescue Threshold

Full Name
Downlink Level Urgent Rescue Threshold
Abbreviated Name
PcDLRescueLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink level threshold used for urgent
rescue decision. When the downlink Rx level in a measurement
report is lower than this threshold, a power control decision for
urgent rescue is made. This parameter can be applied to individual
FR, HR, AFS, AHS, WFS, OWFR, and OWHR versions.
Instance
Cell
Related FG
N/A
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
[25,25,25,25,25,25,25]
Related Parameters
R_POC.PcDlInclLevThs
R_HOC.HoDlLevThs
Parameters
to 1.
R_HOC.HoDlLevThs PcDLRescueLevThs R_POC.PcDlInclLevThs
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2267
SJ-20140527134815-013|2015-03-10(R1.1)
The higher the threshold is, the more likely an urgent rescue for
downlink level is triggered and the lower the proportion of low level
Generally, the quality of a CS call may be influenced when the
Reason
downlink signal strength is lower than -85 dBm.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.67 Uplink Quality Urgent Rescue Threshold

Full Name
Uplink Quality Urgent Rescue Threshold
Abbreviated Name
PcULRescueQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink quality threshold used for urgent
rescue decision. When the uplink Rx quality in a measurement
report is higher than this threshold, a power control decision for
urgent rescue is made. This parameter can be applied to individual
FR, HR, AFS, AHS, WFS, OWFR, and OWHR versions.
Instance
Cell
Related FG
N/A
0..7
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
2-2268
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
R_POC.PcUlInclQualThs
R_HOC.HoUlQualThs
1. This parameter is effective when R_BTS.UseUniformPwrCtrl is
Parameters
set to 1.
2. R_POC.PcUlInclQualThs PcULRescueQualThs
3. PcULRescueQualThs 10 R_HOC.HoUlQualThs
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
The lower the threshold is, the more likely an urgent rescue for
uplink quality is triggered and the lower the proportion of high quality
Generally, the quality of a CS call may be influenced when the signal
Reason
quality is higher than 3.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.68 Downlink Quality Urgent Rescue Threshold

Full Name
Downlink Quality Urgent Rescue Threshold
Abbreviated Name
PcDLRescueQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2269
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the downlink quality threshold used

for urgent rescue decision. When the downlink Rx quality in a
measurement report is higher than this threshold, a power control
decision for urgent rescue is made. This parameter can be applied
to individual FR, HR, AFS, AHS, WFS, OWFR, and OWHR versions.
Instance
Cell
Related FG
N/A
0..7
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
Related Parameters
R_POC.PcDlInclQualThs
R_HOC.HoDlQualThs
1. This parameter is effective when R_BTS.UseUniformPwrCtrl is
Parameters
set to 1.
2. R_POC.PcDlInclQualThs PcDLRescueQualThs
3. PcDLRescueQualThs 10 R_HOC.HoDlQualThs
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
The lower the threshold is, the more likely an urgent rescue for
downlink quality is triggered and the lower the proportion of high

quality in the entire network is.
Generally, the quality of a CS call may be influenced when the signal
Reason
quality is higher than 3.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2270
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.69 N of Urgent Rescue

Full Name
N of Urgent Rescue
Abbreviated Name
PcUrgentRescueN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of N that is used for making

a power control decision for urgent rescue. If P of N uplink or
downlink average Rx level or Rx quality is lower or higher than the
corresponding threshold, an urgent rescue procedure is initiated to
rapid improve the power of the BTS or MS.
Instance
Cell
Related FG
N/A
1..3
Unit
N/A
Default Value
Related Parameters
PcUrgentRescueP
Parameters
to 1.
PcUrgentRescueP PcUrgentRescueN
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If both N and P are set to large values, more levels can be sampled
to filter blur and obtain a more accurate average. However, the

power control sensitivity is reduced.
The default value is set to ensure both accuracy and sensitivity of
Reason
power control.
Change take effect
No
2-2271
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.70 P of Urgent Rescue

Full Name
P of Urgent Rescue
Abbreviated Name
PcUrgentRescueP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of N that is used for making

a power control decision for urgent rescue. If P of N uplink or
downlink average Rx level or Rx quality is lower or higher than the
corresponding threshold, an urgent rescue procedure is initiated to
rapid improve the power of the BTS or MS.
Instance
Cell
Related FG
N/A
1..2
Unit
N/A
Default Value
Related Parameters
PcUrgentRescueN
Parameters
to 1.
PcUrgentRescueP PcUrgentRescueN
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2272
SJ-20140527134815-013|2015-03-10(R1.1)
If both N and P are set to large values, more levels can be sampled
to filter blur and obtain a more accurate average. However, the

power control sensitivity is reduced.
The default value is set to ensure both accuracy and sensitivity of
Reason
power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.71 Uplink Power Reduce Level Margin

Full Name
Uplink Power Reduce Level Margin
Abbreviated Name
PcULRedLevMargin
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
A dynamic threshold is used in the uplink power control procedure

to determine the power adjustment direction by sections. This
parameter indicates the uplink level margin that determines the
dynamic threshold. In case of medium level and low quality level,
the power is not adjusted if the average level after being filtered is
lower than the sum of the uplink level for power increase and the
uplink level margin. This parameter can be applied to FR, HR, AFS,
AHS, WFS, OWFR, and OWHR versions separately.
The subscripts 0 to 3 indicate the corresponding parameters
applicable to FR (0), FP (1), AMR and FR (2), and ARM and HR (3).
Instance
Cell
Related FG
N/A
0..38
2-2273
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
[6,6,6,6,6,6,6]
Related Parameters
PcUlRedLevThs
PcUlInclLevThs
Parameters
to 1.
PcULRedLevMargin PcUlRedLevThs-PcUlInclLevThs
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the margin is, the higher uplink level is required to trigger
a reduction of the uplink power in case of medium level and low

quality level. It is recommended to set the margin to a half of the
difference between the uplink level for power reduction and the
uplink level for power increase.
This default value is the same as that used in the SDR power control
Reason
algorithm. If the average level after being filtered is lower than the
sum of the uplink level for power increase and a margin of 6 dB,
the power is not reduced.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.72 Downlink Power Reduce Level Margin

Full Name
Downlink Power Reduce Level Margin
Abbreviated Name
PcDLRedLevMargin
Managed Object
2-2274
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
A dynamic threshold is used in the downlink power control procedure

to determine the power adjustment direction by sections. This
parameter indicates the downlink level margin that determines the
dynamic threshold. In case of medium level and low quality level,
the power is not adjusted if the average level after being filtered is
lower than the sum of the downlink level for power increase and the
downlink level margin. This parameter can be applied to FR, HR,
AFS, AHS, WFS, OWFR, and OWHR versions separately.
The subscripts 0 to 3 indicate the corresponding parameters
applicable to FR (0), FP (1), AMR and FR (2), and ARM and HR (3).
Instance
Cell
Related FG
N/A
0..38
Unit
N/A
Default Value
[6,6,6,6,6,6,6]
Related Parameters
PcDlRedLevThs
PcDlInclLevThs
Parameters
to 1.
PcDLRedLevMargin PcDlRedLevThs-PcDlInclLevThs
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the margin is, the higher downlink level is required to
trigger a reduction of the downlink power in case of medium level

and low quality level. It is recommended to set the margin to a half
of the difference between the downlink level for power reduction and
the downlink level for power increase.

Reason
This default value is the same as that used in the SDR power control
algorithm. If the average level after being filtered is lower than the
sum of the downlink level for power increase and a margin of 6 dB,
the power is not reduced.
Change take effect
2-2275
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.73 Initial State Power Decrease Limit

Full Name
Initial State Power Decrease Limit
Abbreviated Name
PcINITDecrLimit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the limit of step size for power decrease
in initial state during uplink power control. It can be applied to FR,
HR, AFS, AHS, WFS, OWFR, and OWHR versions separately. This
parameter takes effect when the global power control switch is
turned on.
Instance
Cell
Related FG
N/A
0: 2dB
1: 4dB
2: 6dB
3: 8dB
4: 10dB
5: 12dB
6: 14dB
7: 16dB
Unit
dB
Default Value
[5,5,5,5,5,5,5]
Related Parameters
2-2276
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
to 1.
Value Type
long[7]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is adjusted to a larger value, the uplink power
changes greatly during power control in initial state, which increases

the risk of call drops. If this parameter is adjusted to a smaller value,
the power control sensitivity decreases.
The default value is set to prevent too much power reduction per
Reason
step in initial state of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.74 Uplink Power Decrease Limit of Quality rank

Full Name
Uplink Power Decrease Limit of Quality rank
Abbreviated Name
ULPwrDecrLimit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step size limit for uplink power
decrease corresponding to each quality level when the rapid power
control is enabled. ULPwrDecrLimit[0] indicates the step size limit
corresponding to quality level 0, ULPwrDecrLimit[1] indicates the
step size limit corresponding to quality level 1, and so on.
2-2277
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
N/A
0..38
Unit
N/A
Default Value
[24,22,20,18,16,14,12,10]
Related Parameters
Parameters
to 1.
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
changes greatly during power control, which increases the risk of

call drops. If this parameter is adjusted to a smaller value, the power
control sensitivity decreases.
Median values are recommended to ensure rapid uplink power
Reason
control and prevent too fast power decrease.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.75 Downlink Power Decrease Limit of Quality rank

Full Name
Downlink Power Decrease Limit of Quality rank
Abbreviated Name
DLPwrDecrLimit
Managed Object
2-2278
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step size limit for downlink power
decrease corresponding to each quality level when the rapid power
control is enabled. DLPwrDecrLimit[0] indicates the step size limit
corresponding to quality level 0, DLPwrDecrLimit[1] indicates the
step size limit corresponding to quality level 1, and so on.
Instance
Cell
Related FG
N/A
0..38
Unit
N/A
Default Value
[24,22,20,18,16,14,12,10]
Related Parameters
Parameters
to 1.
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is adjusted to a larger value, the downlink power

Median values are recommended to ensure rapid downlink power
Reason
control and prevent too fast power decrease.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2279
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.76 Uplink Power decrease Maximum Step of Quality 0

Full Name
Uplink Power decrease Maximum Step of Quality 0
Abbreviated Name
PwrULDecrbyLevStep0
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum step size for uplink power
decrease in case of quality level 0 when rapid power control is not
enabled.
Instance
Cell
Related FG
N/A
0: 2dB
1: 4dB
2: 6dB
Unit
dB
Default Value
Related Parameters
Parameters
to 1.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

The power control step can be properly increased when the signal
Reason
quality level is 0.
Change take effect
No
Access
Read/Write
2-2280
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.77 Downlink Power decrease Maximum Step of Quality 0

Full Name
Downlink Power decrease Maximum Step of Quality 0
Abbreviated Name
PwrDLDecrbyLevStep0
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum step size for downlink power
decrease in case of quality level 0 when rapid power control is not
enabled.
Instance
Cell
Related FG
N/A
0: 2dB
1: 4dB
2: 6dB
Unit
dB
Default Value
Related Parameters
Parameters
to 1.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2281
SJ-20140527134815-013|2015-03-10(R1.1)
The power control step can be properly increased when the signal
Reason
quality level is 0.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.78 Uplink Power decrease Maximum Step of Quality 1 and 2

Full Name
Uplink Power decrease Maximum Step of Quality 1 and 2
Abbreviated Name
PwrULDecrbyLevStep1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
decrease in case of quality level 1 or 2 when rapid power control
is not enabled.
Instance
Cell
Related FG
N/A
0: 2dB
1: 4dB
2: 6dB
Unit
dB
Default Value
Related Parameters
PwrULDecrbyLevStep0
Parameters
to 1.
PwrULDecrbyLevStep1 PwrULDecrbyLevStep0
2-2282
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

The power control step cannot be too great to influence CS services
Reason
when the signal quality level is 1 or 2.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.79 Downlink Power decrease Maximum Step of Quality 1 and 2

Full Name
Downlink Power decrease Maximum Step of Quality 1 and 2
Abbreviated Name
PwrDLDecrbyLevStep1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
decrease in case of quality level 1 or 2 when rapid power control
is not enabled.
Instance
Cell
Related FG
N/A
2-2283
SJ-20140527134815-013|2015-03-10(R1.1)
0: 2dB
1: 4dB
2: 6dB
Unit
dB
Default Value
Related Parameters
PwrDLDecrbyLevStep0
Parameters
to 1.
PwrDLDecrbyLevStep1 PwrDLDecrbyLevStep0
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
when the signal quality level is 1 or 2.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.80 Uplink Power decrease Maximum Step of other Quality

Full Name
Uplink Power decrease Maximum Step of other Quality
Abbreviated Name
PwrULDecrbyLevStep2
Managed Object
2-2284
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
decrease in case of quality level greater than or equal to 3 when
rapid power control is not enabled.
Instance
Cell
Related FG
N/A
0: 2dB
1: 4dB
2: 6dB
Unit
dB
Default Value
Related Parameters
PwrULDecrbyLevStep1
Parameters
to 1.
PwrULDecrbyLevStep2 PwrULDecrbyLevStep1
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
when the signal quality level is greater than or equal to 3.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-2285
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.46.81 Downlink Power decrease Maximum Step of other Quality

Full Name
Downlink Power decrease Maximum Step of other Quality
Abbreviated Name
PwrDLDecrbyLevStep2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
decrease in case of quality level greater than or equal to 3 when
rapid power control is not enabled.
Instance
Cell
Related FG
N/A
0: 2dB
1: 4dB
2: 6dB
Unit
dB
Default Value
Related Parameters
PwrDLDecrbyLevStep1
Parameters
to 1.
PwrDLDecrbyLevStep2 PwrDLDecrbyLevStep1
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
when the signal quality level is greater than or equal to 3.
2-2286
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.82 Downlink New Exponential Filter Function

Full Name
Downlink New Exponential Filter Function
Abbreviated Name
DLPCNewFilter
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink new exponential filtering

function switch. This function won't work until the downlink power
control works too.
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-2287
SJ-20140527134815-013|2015-03-10(R1.1)
0: Disabled. 1: Enabled (the downlink power control switch should
also be enabled). This function is enabled when the exponential

filtering is needed to dynamically adjust the BTS Tx power.
The power control for window filtering is used by default, to stay
Reason
consistent with the current mechanism.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.83 Downlink New Exponential Filter Interval

Full Name
Downlink New Exponential Filter Interval
Abbreviated Name
DLPCNewFilterInterv
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

interval, that is, the number of measurement reports in the interval
between two power controls. In other words, the next power
calculation is not performed until the filtering results of several
measurement reports come out after the previous power filtering
is finished.
Instance
BSC
Related FG
0..12
Unit
N/A
Default Value
Related Parameters
N/A
2-2288
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2 is recommended for this parameter, or a greater value. If the value
is too big, power control will be performed too slowly. If it is too

small, the accuracy of power control will be compromised.
The next power control is started from the second measurement
Reason
report after the previous power control is finished, to ensure the

speed and accuracy of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.84 Downlink New Exponential Filter Level Target

Full Name
Downlink New Exponential Filter Level Target
Abbreviated Name
DLPCLevTarget
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the target level of the downlink new

exponential filtering power adjustment. That is, the level expected to
be obtained through power control.
Instance
BSC
Related FG

2-2289
SJ-20140527134815-013|2015-03-10(R1.1)
0: < -110dBm
1: -110 ~ -109 dBm
2: -109 ~ -108 dBm
3: -108 ~ -107 dBm
4: -107 ~ -106 dBm
5: -106 ~ -105 dBm
6: -105 ~ -104 dBm
7: -104 ~ -103 dBm
8: -103 ~ -102 dBm
9: -102 ~ -101 dBm
10: -101 ~ -100 dBm
11: -100 ~ -99 dBm
12: -99 ~ -98 dBm
13: -98 ~ -97 dBm
14: -97 ~ -96 dBm
15: -96 ~ -95 dBm
16: -95 ~ -94 dBm
17: -94 ~ -93 dBm
18: -93 ~ -92 dBm
19: -92 ~ -91 dBm
20: -91 ~ -90 dBm
21: -90 ~ -89 dBm
22: -89 ~ -88 dBm
23: -88 ~ -87 dBm
24: -87 ~ -86 dBm
25: -86 ~ -85 dBm
26: -85 ~ -84 dBm
27: -84 ~ -83 dBm
28: -83 ~ -82 dBm
29: -82 ~ -81 dBm
30: -81 ~ -80 dBm
31: -80 ~ -79 dBm
32: -79 ~ -78 dBm
33: -78 ~ -77 dBm
34: -77 ~ -76 dBm
35: -76 ~ -75 dBm
36: -75 ~ -74 dBm
37: -74 ~ -73 dBm
38: -73 ~ -72 dBm
39: -72 ~ -71 dBm
40: -71 ~ -70 dBm
41: -70 ~ -69 dBm
42: -69 ~ -68 dBm
43: -68 ~ -67 dBm
2-2290
SJ-20140527134815-013|2015-03-10(R1.1)
44: -67 ~ -66 dBm

45: -66 ~ -65 dBm
46: -65 ~ -64 dBm
47: -64 ~ -63 dBm
48: -63 ~ -62 dBm
49: -62 ~ -61 dBm
50: -61 ~ -60 dBm
51: -60 ~ -59 dBm
52: -59 ~ -58 dBm
53: -58 ~ -57 dBm
54: -57 ~ -56 dBm
55: -56 ~ -55 dBm
56: -55 ~ -54 dBm
57: -54 ~ -53 dBm
58: -53 ~ -52 dBm
59: -52 ~ -51 dBm
60: -51 ~ -50 dBm
61: -50 ~ -49 dBm
62: -49 ~ -48dBm
63: > -48 dBm
Unit
N/A
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value too big, power will still be raised even if the downlink Rx
level is high and hence the increase of interference. If it is too small,

power will not be raised promptly when the downlink Rx level is low
and hence the voice quality problem. This parameter should be
adjusted depending on actual needs.
The target level during power control is 20, that is, -90 dBm.
Reason
Change take effect
No
0
2-2291
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.85 Downlink New Exponential Filter RQ Target

Full Name
Downlink New Exponential Filter RQ Target
Abbreviated Name
DLPCRQTarget
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the target quality of the downlink new

exponential filtering power adjustment. That is, the quality expected
to be obtained through power control.
Instance
BSC
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value too small, power will still be raised even if the downlink
Rx quality is good and hence the increase of interference. If it

is too big, power will not be raised promptly when the downlink
Rx quality is not good and hence the voice quality problem. This
parameter should be adjusted depending on actual needs. 1 or
2 is recommended.
2-2292
SJ-20140527134815-013|2015-03-10(R1.1)
The target quality for power control is 3.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.86 Downlink New Exponential Filter Level Weight

Full Name
Downlink New Exponential Filter Level Weight
Abbreviated Name
DLPCLevWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

level weight. The greater the parameter is, the higher proportion
the level takes, that is, the more sensitive the power control is to
level changes.
Instance
BSC
Related FG
0..100
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-2293
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter of level weight should be lower than the quality
weight.
The exponential filtering function adjusts the transmit power
Reason
according to the level and quality. The level weight is 5%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.87 Downlink New Exponential Filter RQ Weight

Full Name
Downlink New Exponential Filter RQ Weight
Abbreviated Name
DLPCRQWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

quality weight. The greater the parameter is, the higher proportion
the quality takes, that is, the more sensitive the power control is
to quality changes.
Instance
BSC
Related FG
0..100
Unit
Default Value
55
Related Parameters
N/A
2-2294
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
weight.
Reason
according to the level and quality. The quality weight is 55%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.88 Downlink New Exponential Filter Level Length

Full Name
Downlink New Exponential Filter Level Length
Abbreviated Name
DLFilterLevLenth
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the level filtering length in the new

exponential filtering algorithm. It is to adjust the increase\decrease
ratio of the downlink power control. The greater the parameter
is, the higher extent the exponential filtering is to filter the level
smoothly, but also the greater hysteresis to level changes.
Instance
BSC
Related FG

2-2295
SJ-20140527134815-013|2015-03-10(R1.1)
3..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The greater the parameter is, the higher extent the exponential
filtering is to filter the level smoothly, but also the greater hysteresis
to level changes. 3 is recommended.
The accuracy and speed of power control algorithm over the level
Reason
filtering is guaranteed at the same time.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.89 Downlink New Exponential Filter RQ Length

Full Name
Downlink New Exponential Filter RQ Length
Abbreviated Name
DLFilterRQLenth
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2296
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the quality filtering length in the new

ratio of the downlink power control. The greater the parameter
is, the higher extent the exponential filtering is to filter the quality
smoothly, but also the greater hysteresis to quality changes.
Instance
BSC
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
filtering is to filter the quality smoothly, but also the greater hysteresis
to quality changes. 3 is recommended.
The accuracy and speed of power control algorithm over the quality
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.90 Downlink New Exponential Filter Increase\Decrease Ratio

Full Name
Downlink New Exponential Filter Increase\Decrease Ratio

2-2297
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
DLPCINCDecRatio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink exponential filtering

increase/decrease ratio. It is also used in the calculation of
exponential filtering to adjust the increase/decrease ratio of downlink
power control.
Instance
BSC
Related FG
1..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Fast power increase and slow power decrease can be achieved if
this value is bigger than 1. 2 or 3 is recommended.
The value helps implement fast power increase and slow power
Reason
decrease during power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2298
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.91 Uplink New Exponential Filter Function

Full Name
Uplink New Exponential Filter Function
Abbreviated Name
ULPCNewFilter
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink new exponential filtering function

switch. This function won't work until the uplink power control works
too.
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
0: Disabled. 1: Enabled (the uplink power control switch should also
be enabled). This function is enabled when the exponential filtering

is needed to dynamically adjust the BTS Tx power.
The power control for window filtering is used by default, to stay
Reason
consistent with the current mechanism.
Change take effect
No
Access
Read/Write
2-2299
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.92 Uplink New Exponential Filter Interval

Full Name
Uplink New Exponential Filter Interval
Abbreviated Name
ULPCNewFilterInterv
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink new exponential filtering interval,

that is, the number of measurement reports in the interval between
two power controls. In other words, the next power calculation is not
performed until the filtering results of several measurement reports
come out after the previous power filtering is finished.
Instance
BSC
Related FG
0..12
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2 is recommended for this parameter, or a greater value. If the value
is too big, power control will be performed too slowly. If it is too

small, the accuracy of power control will be compromised.
2-2300
SJ-20140527134815-013|2015-03-10(R1.1)
The next power control is started from the second measurement
Reason
report after the previous power control is finished, to ensure the

speed and accuracy of power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.93 Uplink New Exponential Filter Level Target

Full Name
Uplink New Exponential Filter Level Target
Abbreviated Name
ULPCLevTarget
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the target level of the uplink new

exponential filtering power adjustment. That is, the level expected to
be obtained through power control.
Instance
BSC
Related FG
0: < -110dBm
1: -110 ~ -109 dBm
2: -109 ~ -108 dBm
3: -108 ~ -107 dBm
4: -107 ~ -106 dBm
5: -106 ~ -105 dBm
6: -105 ~ -104 dBm
7: -104 ~ -103 dBm
8: -103 ~ -102 dBm
9: -102 ~ -101 dBm
10: -101 ~ -100 dBm
2-2301
SJ-20140527134815-013|2015-03-10(R1.1)
11: -100 ~ -99 dBm

12: -99 ~ -98 dBm
13: -98 ~ -97 dBm
14: -97 ~ -96 dBm
15: -96 ~ -95 dBm
16: -95 ~ -94 dBm
17: -94 ~ -93 dBm
18: -93 ~ -92 dBm
19: -92 ~ -91 dBm
20: -91 ~ -90 dBm
21: -90 ~ -89 dBm
22: -89 ~ -88 dBm
23: -88 ~ -87 dBm
24: -87 ~ -86 dBm
25: -86 ~ -85 dBm
26: -85 ~ -84 dBm
27: -84 ~ -83 dBm
28: -83 ~ -82 dBm
29: -82 ~ -81 dBm
30: -81 ~ -80 dBm
31: -80 ~ -79 dBm
32: -79 ~ -78 dBm
33: -78 ~ -77 dBm
34: -77 ~ -76 dBm
35: -76 ~ -75 dBm
36: -75 ~ -74 dBm
37: -74 ~ -73 dBm
38: -73 ~ -72 dBm
39: -72 ~ -71 dBm
40: -71 ~ -70 dBm
41: -70 ~ -69 dBm
42: -69 ~ -68 dBm
43: -68 ~ -67 dBm
44: -67 ~ -66 dBm
45: -66 ~ -65 dBm
46: -65 ~ -64 dBm
47: -64 ~ -63 dBm
48: -63 ~ -62 dBm
49: -62 ~ -61 dBm
50: -61 ~ -60 dBm
51: -60 ~ -59 dBm
52: -59 ~ -58 dBm
53: -58 ~ -57 dBm
54: -57 ~ -56 dBm
2-2302
SJ-20140527134815-013|2015-03-10(R1.1)
55: -56 ~ -55 dBm

56: -55 ~ -54 dBm
57: -54 ~ -53 dBm
58: -53 ~ -52 dBm
59: -52 ~ -51 dBm
60: -51 ~ -50 dBm
61: -50 ~ -49 dBm
62: -49 ~ -48dBm
63: > -48 dBm
Unit
N/A
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value too big, power will still be raised even if the uplink Rx
level is high and hence the increase of interference. If it is too small,

power will not be raised promptly when the uplink Rx level is low
and hence the voice quality problem. This parameter should be
adjusted depending on actual needs.
The target level during power control is 20, that is, -90 dBm.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2303
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.94 Uplink New Exponential Filter RQ Target

Full Name
Uplink New Exponential Filter RQ Target
Abbreviated Name
ULPCRQTarget
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the target quality of the uplink new

exponential filtering power adjustment. That is, the quality expected
to be obtained through power control.
Instance
BSC
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value too small, power will still be raised even if the uplink Rx
quality is good and hence the increase of interference. If it is too big,

power will not be raised promptly when the uplink Rx quality is not
good and hence the voice quality problem. This parameter should
be adjusted depending on actual needs. 1 or 2 is recommended.
The target quality for power control is 3.
Reason
Change take effect
No
Access
Read/Write
2-2304
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.95 Uplink New Exponential Filter Level Weight

Full Name
Uplink New Exponential Filter Level Weight
Abbreviated Name
ULPCLevWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink new exponential filtering level

weight. The greater the parameter is, the higher proportion the
level takes, that is, the more sensitive the power control is to level
changes.
Instance
BSC
Related FG
0..100
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
weight.
Reason
according to the level and quality. The level weight is 6%.
Change take effect
2-2305
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.96 Uplink New Exponential Filter RQ Weight

Full Name
Uplink New Exponential Filter RQ Weight
Abbreviated Name
ULPCRQWeight
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink new exponential filtering quality

weight. The greater the parameter is, the higher proportion the
quality takes, that is, the more sensitive the power control is to
quality changes.
Instance
BSC
Related FG
0..100
Unit
Default Value
75
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2306
SJ-20140527134815-013|2015-03-10(R1.1)
weight.
Reason
according to the level and quality. The quality weight is 75%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.97 Uplink New Exponential Filter Level Length

Full Name
Uplink New Exponential Filter Level Length
Abbreviated Name
ULFilterLevLenth
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the level filtering length in the new

ratio of the uplink power control. The greater the parameter is, the
higher extent the exponential filtering is to filter the level smoothly,
but also the greater hysteresis to level changes.
Instance
BSC
Related FG
3..15
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2307
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
filtering is to filter the level smoothly, but also the greater hysteresis
to level changes. 3 is recommended.
The accuracy and speed of power control algorithm over the level
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.98 Uplink New Exponential Filter RQ Length

Full Name
Uplink New Exponential Filter RQ Length
Abbreviated Name
ULFilterRQLenth
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quality filtering length in the new

ratio of the uplink power control. The greater the parameter is, the
higher extent the exponential filtering is to filter the quality smoothly,
but also the greater hysteresis to quality changes.
Instance
BSC
Related FG
1..20
2-2308
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
filtering is to filter the quality smoothly, but also the greater hysteresis
to quality changes. 3 is recommended.
The accuracy and speed of power control algorithm over the quality
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.99 Uplink New Exponential Filter Increase\Decrease Ratio

Full Name
Uplink New Exponential Filter Increase\Decrease Ratio
Abbreviated Name
ULPCINCDecRatio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2309
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the uplink exponential filtering

increase/decrease ratio. It is also used in the calculation of
exponential filtering to adjust the increase/decrease ratio of uplink
power control.
Instance
BSC
Related FG
1..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Fast power increase and slow power decrease can be achieved if
this value is bigger than 1. 2 or 3 is recommended.
The value helps implement fast power increase and slow power
Reason
decrease during power control.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.100 Power control new filter para1

Full Name
Power control new filter para1
Abbreviated Name
PCNewFilter_1
2-2310
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Exponential filtering parameter 1 reserved for new functions.
Instance
BSC
Related FG
0..100
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This is a parameter reserved for exponential filtering. It has no
meaning at the moment.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.101 Power control new filter para2

Full Name
Power control new filter para2

2-2311
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
PCNewFilter_2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Exponential filtering parameter 2 reserved for new functions
Instance
BSC
Related FG
0..100
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.102 Downlink power control rescue

2-2312
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Downlink power control rescue
Abbreviated Name
DLPCRescue
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink rescuable power control

function switch. When both the downlink level and quality meet the
configured level and quality thresholds for power control rescue,
the downlink power will be increased quickly so that the call quality
won't be affected.
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this function is enabled, the downlink power can be raised quickly
when both the downlink level and quality are bad.
This is the downlink rescuable power control switch. It is off,
Reason
consistent with the original mechanism.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-2313
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.46.103 Downlink rescue level threshold

Full Name
Downlink rescue level threshold
Abbreviated Name
DLRescueLevelThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The power control rescue is triggered when the current downlink

level falls below this threshold and the current downlink quality falls
below the downlink rescuable power control quality threshold.
Instance
BSC
Related FG
0: < -110dBm
1: -110 ~ -109 dBm
2: -109 ~ -108 dBm
3: -108 ~ -107 dBm
4: -107 ~ -106 dBm
5: -106 ~ -105 dBm
6: -105 ~ -104 dBm
7: -104 ~ -103 dBm
8: -103 ~ -102 dBm
9: -102 ~ -101 dBm
10: -101 ~ -100 dBm
11: -100 ~ -99 dBm
12: -99 ~ -98 dBm
13: -98 ~ -97 dBm
14: -97 ~ -96 dBm
15: -96 ~ -95 dBm
16: -95 ~ -94 dBm
17: -94 ~ -93 dBm
18: -93 ~ -92 dBm
19: -92 ~ -91 dBm
20: -91 ~ -90 dBm
21: -90 ~ -89 dBm
22: -89 ~ -88 dBm
23: -88 ~ -87 dBm
2-2314
SJ-20140527134815-013|2015-03-10(R1.1)
24: -87 ~ -86 dBm

25: -86 ~ -85 dBm
26: -85 ~ -84 dBm
27: -84 ~ -83 dBm
28: -83 ~ -82 dBm
29: -82 ~ -81 dBm
30: -81 ~ -80 dBm
31: -80 ~ -79 dBm
32: -79 ~ -78 dBm
33: -78 ~ -77 dBm
34: -77 ~ -76 dBm
35: -76 ~ -75 dBm
36: -75 ~ -74 dBm
37: -74 ~ -73 dBm
38: -73 ~ -72 dBm
39: -72 ~ -71 dBm
40: -71 ~ -70 dBm
41: -70 ~ -69 dBm
42: -69 ~ -68 dBm
43: -68 ~ -67 dBm
44: -67 ~ -66 dBm
45: -66 ~ -65 dBm
46: -65 ~ -64 dBm
47: -64 ~ -63 dBm
48: -63 ~ -62 dBm
49: -62 ~ -61 dBm
50: -61 ~ -60 dBm
51: -60 ~ -59 dBm
52: -59 ~ -58 dBm
53: -58 ~ -57 dBm
54: -57 ~ -56 dBm
55: -56 ~ -55 dBm
56: -55 ~ -54 dBm
57: -54 ~ -53 dBm
58: -53 ~ -52 dBm
59: -52 ~ -51 dBm
60: -51 ~ -50 dBm
61: -50 ~ -49 dBm
62: -49 ~ -48dBm
63: > -48 dBm
Unit
N/A
Default Value
15
Related Parameters
N/A
2-2315
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
30 (-80dBm) is recommend. Power can be quickly raised when the
level falls below the threshold to address the problem in the event of
fast fading. If the threshold is too high, repetitive power control will
happen. If the thresholds too low, the function will become useless.
This is the level threshold for downlink rescuable power control,
Reason
which can be enabled when the current level is lower than the
threshold.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.104 Downlink rescue quality threshold

Full Name
Downlink rescue quality threshold
Abbreviated Name
DLRescueQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The power control rescue is triggered when the current downlink

quality falls below this threshold and the current downlink level falls
below the downlink rescuable power control level threshold.
Instance
BSC
2-2316
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
4 is recommended. Power can be quickly raised when the quality
rises above the threshold to address the problem of bad quality in

fast fading. It is used together with DLRescueLevelThs.
This is the quality threshold for downlink rescuable power control,
Reason
which can be enabled when the current quality is lower than the
threshold.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.105 Downlink good level bad quality

Full Name
Downlink good level bad quality
Abbreviated Name
DLGoodLevBadQua
Managed Object
3GPP Name
N/A
2-2317
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the function switch for disabling the

downlink power control due to downlink good level but bad
quality. The case of good level and bad quality can be caused
by interference and in this case, the power of two users may rise
sharply if the power is increased. For this reason, it is not necessary
to increase the power if the level is good but the quality is bad.
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This switch can be turned On in the case of high downlink level
and bad downlink quality caused by interferences, so as to prevent

power soaring of two subscribers.
This is the downlink good level and bad quality power control switch.
Reason
It is off, consistent with the original mechanism.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2318
SJ-20140527134815-013|2015-03-10(R1.1)
2.46.106 Uplink good level bad quality

Full Name
Uplink good level bad quality
Abbreviated Name
ULGoodLevBadQua
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the function switch for disabling the uplink
power control due to downlink good level but bad quality. The case
of good level and bad quality can be caused by interference and in
this case, the power of two users may rise sharply if the power is
increased. For this reason, it is not necessary to increase the power
if the level is good but the quality is bad.
Instance
BSC
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This switch can be turned On in the case of high uplink level and
bad downlink quality caused by interferences, so as to prevent

power soaring of two subscribers.
This is the uplink good level and bad quality power control switch. It
Reason
is off, consistent with the original mechanism.
Change take effect
No
2-2319
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.107 The different increase downlink level threshold of SAIC

MS and NON-SAIC MS
Full Name
The different increase downlink level threshold of SAIC MS and

NON-SAIC MS
Abbreviated Name
pcSaicDlIncLevDif
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
SAIC MSs feature high receptivity. Their receive sensitivity is higher

than that of ordinary MSs. Therefore, the receive level required is
lower than that of ordinary MSs.This parameter indicates that the
difference between downlink level thresholds of SAIC MSs is lower
than that of ordinary MSs when the power increases.
Instance
BSC
Related FG
0..4
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2320
SJ-20140527134815-013|2015-03-10(R1.1)
If the customer requires high radio quality, this parameter can be
adjusted to differentiate the power control step between a SAIC

handset and an ordinary one. A larger value indicates a greater
difference of power control step between a SAIC handset and an
ordinary one.
By default, the Rx levels of SAIC MSs and ordinary MSs are
Reason
considered the same. No special treatment is necessary.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.46.108 The different decrease downlink level threshold of SAIC

MS and NON-SAIC MS
Full Name
The different decrease downlink level threshold of SAIC MS and

NON-SAIC MS
Abbreviated Name
pcSaicDlRedLevDif
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
SAIC MSs feature high receptivity. Their receive sensitivity is higher

than that of ordinary MSs. Therefore, the receive level required is
lower than that of ordinary MSs.This parameter indicates that the
difference between downlink level thresholds of SAIC MSs is lower
than that of ordinary MSs when the power decreases.
Instance
BSC
Related FG
0..4
2-2321
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the customer requires high radio quality, this parameter can be
adjusted to differentiate the power control step between a SAIC

handset and an ordinary one. A larger value indicates a greater
difference of power control step between a SAIC handset and an
ordinary one.
By default, the Rx levels of SAIC MSs and ordinary MSs are
Reason
considered the same. No special treatment is necessary.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.47 PS Handover Control(GPsHandoverControl)

2.47.1 PS Handover Control ID
Full Name
PS Handover Control ID
Abbreviated Name
GPsHandoverControlId
Managed Object
PS Handover Control(GPsHandoverControl)
2-2322
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a PS handover control ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->GPRS Configuration->PS Handover
Control
N/A
2.47.2 PS handover support

Full Name
PS handover support
Abbreviated Name
handoverSupp
2-2323
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports PS handovers

of an MS.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
RlcStateReset
EnablePCCNTrigHO
The service function parameters used for PS handovers work only
Parameters
when this parameter is enabled.
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2-2324
SJ-20140527134815-013|2015-03-10(R1.1)
2.47.3 ACK of PS handover command

Full Name
ACK of PS handover command
Abbreviated Name
hoCommandAck
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the PS HANDOVER command

sent by the BSC requires acknowledgement from an MS during a
PS handover. Acknowledgement from the MS may improve the
reliability of handovers but increase the delay. No acknowledgement
from the MS may speed up the handover process but reduce the
reliability.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
2-2325
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Control
N/A
2.47.4 Blind transmission support

Full Name
Blind transmission support
Abbreviated Name
blindTransSupp
Managed Object
3GPP Name
Blind Transmission
3GPP Reference
N/A
Description
This parameter indicates whether blind transmission is supported

in the local cell. Blind transmission means the target cell begins to
transmit downlink data before an MS accesses the local cell.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
2-2326
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.5 Optimized handover support

Full Name
Optimized handover support
Abbreviated Name
optimizeHOSupp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether optimized handovers are

supported in the cell that supports PS handovers.
If optimized handovers are supported, it is necessary to decide
whether the serving cell and the target cell have the same NSE
and RA. If yes, an optimized handover is performed, and relevant
QoS information (including PFI, PFT, ABQP, and ARP) is required.
Otherwise, a normal handover is performed.
Instance
Cell
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2327
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
needed.
It is a feature function switch. By default, it is enabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.6 Send handover access in synchronized handover

Full Name
Send handover access in synchronized handover
Abbreviated Name
sendAccessSync
Managed Object
3GPP Name
PS Handover Access
3GPP Reference
N/A
Description
This parameter indicates whether a handover access message is

sent during synchronous handovers. After an MS receives a PS
handover message, it is handed over to the channel allocated for
the new cell. If the PS HANDOVER command carries Handover
Reference, the MS sends a PS HANDOVER ACCESS message
to the BSS.
Instance
Cell
Related FG
2-2328
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.7 Send handover access in pre-synchronized handover

Full Name
Send handover access in pre-synchronized handover
Abbreviated Name
sendAccessPreSync
Managed Object
3GPP Name
PS Handover Access
3GPP Reference
N/A
2-2329
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether a PS HANDOVER ACCESS

message is sent during pre-synchronous handovers. After an MS
receives a PS handover message, it is handed over to the channel
allocated for the new cell. If the PS HANDOVER command carries
Handover Reference, the MS sends a PS HANDOVER ACCESS
message to the BSS.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2-2330
SJ-20140527134815-013|2015-03-10(R1.1)
2.47.8 Reset RLC

Full Name
Reset RLC
Abbreviated Name
rlcStateReset
Managed Object
3GPP Name
RLC_RESET
3GPP Reference
N/A
Description
This parameter indicates whether the state of RLC is reset, that

is, whether the related variables of the RLC layer entity remain
unchanged when an MS is handed over from the source cell to the
target cell.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
The default value is set because BSC doesn't support preserving
RLC state in PS Handover.
The default value is set when PS handovers are not supported.
Reason
Change take effect
No
Access
Read/Write
2-2331
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Control
N/A
2.47.9 Trigger PS handover by PCCN

Full Name
Trigger PS handover by PCCN
Abbreviated Name
enablePCCNTrigHO
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BSC triggers a PS handover

when receiving the PCCN (Packet Cell Change Notification)
message sent from an MS.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value is set to trigger a PS handover soon when the BSC
Reason
receives a measurement report or a PCCN message from the MS.
Change take effect
2-2332
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
zeroAllowed
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
According to GSM specifications, an MS can report measurement

data of up to six neighbor cells with strongest signal strength to BSS.
Therefore, the measurement results may not be consecutive. For
cells whose signal strength is less than -110 dBm, the measurement
data is not reported. The BSC marks the measurement data of such
neighbor cells as zero.
To avoid the negative impact of zero on averaging, supposing
occasional zero is allowed and is not used in averaging. However,
excessive occurrences of zero indicate that the signals of this
neighbor cell are too poor. This parameter specifies the number
of occurrences of zero used for average calculation that can be
allowed or ignored during averaging.
To be specific, during averaging, if the number of zeroes in the
sample exceeds ZeroAllowed, these sampling values are hardly
reliable, and the measurement average is the sum of the reported
values divided by NCellWindow. If the number of zeroes in the
reported values does not exceed ZeroAllowed, these sampling
values are much reliable and the measurement average is the sum
of the reported values divided by (NCellWindow the number of
zeroes).
2-2333
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Excessive occurrences of zero indicate that the signals of this
neighbor cell are too poor. A smaller value helps to select neighbor
cells with stronger signal strength.
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoUlLevWindow
Managed Object
2-2334
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description

to the measurement data. To avoid the negative impact of
burst measurement values resulting from a complicated radio
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
12
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2-2335
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
hoDlLevWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the number of samples used to calculate

the average downlink signal strength during downlink power control
decision.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A smaller value indicates the greater number of samples used to
calculate the average and less fluctuation of the average, but may
cause a lower sensitivity.
In the downlink direction, the measurement data cannot be reported
Reason
soon. Therefore, multiple radio blocks are reported in batches.
Change take effect
No
Access
Read/Write
2-2336
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoUlQualWindow
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
12
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2337
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoDlQualWindow
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..31
Unit
N/A
2-2338
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.15 Distance
Full Name
Distance
Abbreviated Name
distanceWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2339
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

decision. A larger value makes it more difficult to select a neighbor
cell as the target cell.
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2-2340
SJ-20140527134815-013|2015-03-10(R1.1)
2.47.16 Neighboring cell

Full Name
Neighboring cell
Abbreviated Name
ncellWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

decision. A larger value makes it more difficult to select a neighbor
cell as the target cell.
Reason
handovers.
Change take effect
No
2-2341
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoUlLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

The uplink received signal strength is one of the causes for
handovers. In the N averages of the recently uplink received signal
strength values, if the P averages are less than the threshold, the
MS should be handed over because the uplink signal strength is
too weak.
HoUlLevN the value of N, and HoUlLevP the value of P. If this
handover condition is fulfilled, an internal handover is usually
first. If power control does not work, a handover is performed.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
18
2-2342
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoUlLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2343
SJ-20140527134815-013|2015-03-10(R1.1)
Description

too weak.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
2-2344
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoUlLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

too weak.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2345
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoDlLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2346
SJ-20140527134815-013|2015-03-10(R1.1)
Description

received signal strength is one of the causes for handovers. In the
N averages of the recently downlink received signal strength values,
if the P averages are less than the threshold, the MS should be
handed over because the downlink signal strength is too low.
controlled first. If power control does not work, a handover is
of the cell.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
18
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
2-2347
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoDlLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

of the cell.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2348
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoDlLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2349
SJ-20140527134815-013|2015-03-10(R1.1)
Description

of the cell.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
2-2350
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoUlQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

received signal quality is one of the causes for handovers. In the N
averages of the recently received signal quality levels in the uplink,
if the P averages are greater than the threshold, the MS should be
handed over because the uplink signal quality is too poor.
is controlled first. If power control does not work, a handover is
performed.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
2-2351
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoUlQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

2-2352
SJ-20140527134815-013|2015-03-10(R1.1)

performed.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoUlQualN
2-2353
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

performed.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
2-2354
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoDlQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

received signal quality is one of the causes for handovers. In the
downlink, if the P averages are greater than the threshold, the MS
should be handed over because the downlink signal quality is too
poor.
does not work, a handover is performed.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
2-2355
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
hoDlQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2356
SJ-20140527134815-013|2015-03-10(R1.1)
Description

poor.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
2-2357
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
hoDlQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

poor.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2358
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.29 Uplink receive level of intra-ho Threshold

Full Name
Uplink receive level of intra-ho Threshold
Abbreviated Name
intraHoUlLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

co-channel interference is one of the causes for handovers. In the
N averages of the recently uplink received signal strength values,
if the P averages are greater than the threshold and the uplink
2-2359
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.30 Uplink receive level of intra-ho Value P

Full Name
Uplink receive level of intra-ho Value P
Abbreviated Name
intraHoUlLevP
Managed Object
2-2360
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
2-2361
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Control
N/A
2.47.31 Uplink receive level of intra-ho Value N

Full Name
Uplink receive level of intra-ho Value N
Abbreviated Name
intraHoUlLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2362
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.32 Downlink receive level of intra-ho Threshold

Full Name
Downlink receive level of intra-ho Threshold
Abbreviated Name
intraHoDlLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2363
SJ-20140527134815-013|2015-03-10(R1.1)
Description

co-channel interference is one of the causes for handovers. In the N
averages of the recently downlink received signal strength values,
if the P averages are greater than the threshold and the downlink
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
40
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
2-2364
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.47.33 Downlink receive level of intra-ho Value P

Full Name
Downlink receive level of intra-ho Value P
Abbreviated Name
intraHoDlLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2365
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.34 Downlink receive level of intra-ho Value N

Full Name
Downlink receive level of intra-ho Value N
Abbreviated Name
intraHoDlLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

2-2366
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
rapidHoThs
Managed Object
2-2367
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
Some parameters are required during fast fading handovers. The

fast fading handover threshold indicates signal strength. If the
measured signal strength of a call is consecutively less than this
threshold, the fast fading handover condition is fulfilled and the
associated cells among the neighbor cells are the candidates for
the target cell.
handovers. The RapdiHoN parameter, a counter value, indicates
the number of times that the measured signal strength of a call is
consecutively less than the fast fading handover threshold.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
It is not necessary to set the handover threshold too high in case of
fast handovers because the MS can quickly move to a location with

a higher cell level. If this parameter is set too large, the handover
decision may be delayed.
Reason
handovers.
Change take effect
No
Access
Read/Write
2-2368
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Control
N/A

Full Name
Abbreviated Name
rapidHoN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Some parameters are required during fast fading handovers. The

fast fading handover threshold indicates signal strength. If the
measured signal strength of a call is consecutively less than this
threshold, the fast fading handover condition is fulfilled and the
associated cells among the neighbor cells are the candidates for
the target cell.
handovers. The RapdiHoN parameter, a counter value, indicates
the number of times that the measured signal strength of a call is
consecutively less than the fast fading handover threshold.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-2369
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
It is not necessary to set the handover threshold too high in case of
fast handovers because the MS can quickly move to a location with

a higher cell level. If this parameter is set too large, the handover
decision may be delayed.
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.37 Macro to micro handover Threshold

Full Name
Macro to micro handover Threshold
Abbreviated Name
macroMicroHoThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Some parameters are required during macro-to-micro handovers:

signal strength threshold and counter value. The macro-to-micro
handover threshold represents signal strength. If the measured
signal strength of a subordinate neighbor cell is consecutively
greater than MacroMicroHoThs for a certain number of times, the
call can be handed over to this neighbor cell.
In this way, the slow-moving MS can be handed over to the
subordinate neighbor cell. The number of times is determined by
the MacroMicroHoN parameter for each neighbor cell. The setting
of the MacroMicroHoN parameter for the local cell is related to
2-2370
SJ-20140527134815-013|2015-03-10(R1.1)
the size of the local cell and the standard used for measuring the
moving speed of an MS.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
A larger threshold tends to trigger a macro-to-micro handover. The
setting of the MacroMicroHoN parameter for the local cell is related

to the size of the local cell and the standard used for measuring the
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.38 Macro to micro handover Value N

Full Name
Macro to micro handover Value N
Abbreviated Name
macroMicroHoN
2-2371
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Some parameters are required during macro-to-micro handovers:

signal strength threshold and counter value. The macro-to-micro
handover threshold represents signal strength. If the measured
signal strength of a subordinate neighbor cell is consecutively
greater than MacroMicroHoThs for a certain number of times, the
call can be handed over to this neighbor cell.
In this way, the slow-moving MS can be handed over to the
subordinate neighbor cell. The number of times is determined by
the MacroMicroHoN parameter for each neighbor cell. The setting
of the MacroMicroHoN parameter for the local cell is related to
the size of the local cell and the standard used for measuring the
Instance
Cell
Related FG
1..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
A larger threshold tends to trigger a macro-to-micro handover. The
setting of the MacroMicroHoN parameter for the local cell is related

to the size of the local cell and the standard used for measuring the
Reason
handovers.
Change take effect
No
2-2372
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
distanceThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
For the PS service, the distance between an MS and the BTS is one
of the causes for handovers. In the N averages of the latest TAs
(distance), if the P averages are greater than this threshold, the MS
is handed over because the MS is beyond the coverage of the cell.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
60
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set as required after the distance handover
algorithm is enabled. It is recommended to keep the default value

because the distance handover algorithm is rarely used.
2-2373
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is set to initiate TA-related handovers only when
Reason
the actual TA is close to the maximum TA supported by the cell.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
distanceP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of P for distance handovers

during a PS handover. In the process of a distance handover, if
P out of N TA values satisfy the handover decision condition, the
distance handover condition is fulfilled.
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2374
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
handover attempts and executions. A larger value makes it more

difficult to trigger a handover and may cause a higher rate of call
drops.
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
distanceN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of N for distance handovers

during a PS handover. In the process of a distance handover, if
P out of N TA values satisfy the handover decision condition, the
distance handover condition is fulfilled.
Instance
Cell
Related FG
1..31
2-2375
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

drops.
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

Full Name
Abbreviated Name
pbgtHoP
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
2-2376
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the values of N and P for PBGT handovers

during a PS handover. In the process of a PBGT handover, if P
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

drops.
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A

2-2377
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
pbgtHoN
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description
This parameter indicates the values of N and P for PBGT handovers

during a PS handover. In the process of a PBGT handover, if P
Instance
Cell
Related FG
1..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

drops.
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
2-2378
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.47.44 MIN interval between inter-cell handover

Full Name
MIN interval between inter-cell handover
Abbreviated Name
hoMinInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

handovers occur frequently. This parameter helps restrict frequent
inter-cell handovers and improves call quality.
concentric handovers but instead the inter-cell handovers. In
addition, a micro-cell has its own handover policy; therefore this
parameter is only effective for the macro-cell layer and the above
layers.
For a macro-cell, the default value can be set to 5; for a micro-cell,
the default value can be set to only 0.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-2379
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
This parameter helps prevent an MS from being handed over to the
original cell. A larger value indicates a longer time interval for the
MS to be handed over to the original cell.
The default value is set based on CS service settings.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.45 Prior layer selecting parameter on signal level/quality

Full Name
Prior layer selecting parameter on signal level/quality
Abbreviated Name
layerPriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the signal level and signal quality handover conditions are
met, this parameter decides the priority to select and sequence the
candidate cells for a handover. Three options are available:
UPPER_LAYER: Priority is given to the neighbor cells at the upper
layer of the local cell, then to those at the same layer, and finally to
other neighbor cells.
SAME_LAYER: Priority is given to the neighbor cells at the same
layer of the local cell, then to those at the upper layer, and finally to
other neighbor cells.
ALL_LAYER: All neighbor cells are treated in the same way.
This parameter determines which method is to be selected. During
the process of handover control caused by level and quality, the
2-2380
SJ-20140527134815-013|2015-03-10(R1.1)
priority specified by this parameter is higher than that of neighbor

cells.
Instance
Cell
Related FG
1: UPPER_LAYER
2: SAME_LAYER
3: ALL_LAYER
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
SAME_LAYER is set by default.
Reason
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.46 Handover to same layer other band neighbour cell for

PBGT permitted
2-2381
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Handover to same layer other band neighbour cell for PBGT

permitted
Abbreviated Name
pbgtHoLayerSame
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether it is allowed to perform a PBGT

handover to a neighbor cell at the same layer but with a different
frequency band.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Generally, a PBGT handover is performed at the same layer or not
involved with any layer.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
2-2382
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.47.47 Handover to neighbour cell with no Layer Relation for

PBGT permitted
Full Name
Handover to neighbour cell with no Layer Relation for PBGT

permitted
Abbreviated Name
pbgtHoLayerUndefine
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether it is allowed to perform a PBGT

handover to a neighbor cell with no layer relationship.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
0
2-2383
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Control
N/A
2.47.48 Handover to upper layer neighbour cell for PBGT permitted

Full Name
Handover to upper layer neighbour cell for PBGT permitted
Abbreviated Name
pbgtHoLayerUp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a PBGT handover to an

upper-layer neighbor cell.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
2-2384
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.49 Handover to under layer neighbor cell for PBGT permitted

Full Name
Handover to under layer neighbor cell for PBGT permitted
Abbreviated Name
pbgtHoLayerLow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow a PBGT handover to a

lower-layer neighbor cell.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes

2-2385
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.50 Synchronism
Full Name
Synchronism
Abbreviated Name
hoSyncInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a synchronous handover to a

cell is allowed.
If the BSC detects that the timing advance of the cell (target cell)
is equal to that of the source cell, synchronous handovers to the
cell are allowed.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2386
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Synchronous handover is enabled for the cells that support intra-cell
handovers.
The default value is set based on actual demand.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.51 Asynchronism
Full Name
Asynchronism
Abbreviated Name
hoNSyncInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether asynchronous handovers to a

cell are allowed.
If the BSC fails to obtain the timing advance of the cell (target cell),
only asynchronous handovers to the cell are allowed.
Instance
Cell
Related FG
0: not allowed
1: allowed
2-2387
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Asynchronous handover is generally enabled for all cells.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.52 Pseudo-synchronism (HoPatternInd_2)

Full Name
Pseudo-synchronism (HoPatternInd_2)
Abbreviated Name
hoFSyncInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2388
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether pseudo-synchronous handovers

are supported during a PS handover in the local cell. If an MS can
calculate the timing advance of the cell (target cell) and the MS
supports pseudo-synchronous handovers, pseudo-synchronous
handovers to the cell are allowed.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.53 Pre-synchronism (HoPatternInd_3)

2-2389
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Pre-synchronism (HoPatternInd_3)
Abbreviated Name
hoPSyncInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether pre-synchronous handovers to

a cell are allowed.
If the BSC obtains the timing advance of the cell (target cell) and
considers the timing advance when sending a handover command,
pre-synchronous handovers to the cell are allowed.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
2-2390
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.47.54 Allow intra-Cell handover attempt due to uplink interference

Full Name
Allow intra-Cell handover attempt due to uplink interference
Abbreviated Name
psHoControlIntfUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

caused by uplink interference during a PS handover.
The value is the 1st bit of the HoControl parameter of the type
DWORD.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
2-2391
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Control
N/A

interference
Full Name
Allow intra-Cell handover attempt due to downlink interference
Abbreviated Name
psHoControlIntfDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

caused by downlink interference during a PS handover.
The value is the 2nd bit of the HoControl parameter of the type
DWORD.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2392
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.56 Allow standard PBGT handover

Full Name
Allow standard PBGT handover
Abbreviated Name
psHoControlPbgt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow standard PBGTPS

handovers.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
2-2393
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
needed.
This parameter is enabled by default because PBGT handovers
Reason
are effective and common.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.57 Allow handover due to distance

Full Name
Allow handover due to distance
Abbreviated Name
psHoControlDistance
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow PS handovers caused

by distance.
Instance
Cell
Related FG
2-2394
SJ-20140527134815-013|2015-03-10(R1.1)
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
needed.
This parameter is disabled by default for ordinary networks.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.58 Allow automatic handover based on traffic

Full Name
Allow automatic handover based on traffic
Abbreviated Name
psHoControlLoad
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2395
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether to allow automatic traffic-based

handovers during a PS handover.
The value is the 5th bit of the HoControl parameter of the type
DWORD.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.59 Enable rapid handover

Full Name
Enable rapid handover

2-2396
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
psHoControlRapid
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow the handovers caused

by fast level fading.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2-2397
SJ-20140527134815-013|2015-03-10(R1.1)
2.47.60 Enable macro to micro handover

Full Name
Enable macro to micro handover
Abbreviated Name
psHoControlMacroMicro
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow delay waiting during a

macro-to-micro PS handover.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
2-2398
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.47.61 Enable queue in handover

Full Name
Enable queue in handover
Abbreviated Name
queInHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether it is allowed to queue for channels

during a PS handover.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Enabling this parameter helps relieve channel congestion caused
by busy services.
It is not recommended to enable this parameter because there are
Reason
too many target cells for handovers and the time interval between
handover attempts is short.
Change take effect
No
2-2399
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Control
N/A
2.47.62 Enable queue in handover preemption in handover

Full Name
Enable queue in handover preemption in handover
Abbreviated Name
preeptInHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether it is allowed to preempt the

channels of lower-priority users during a PS handover.
Instance
Cell
Related FG
0: not allowed
1: allowed
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
To ensure that high-priority users can easily obtain a channel during
a handover, this parameter should be enabled.
2-2400
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is disabled by default to avoid adverse impact of
Reason
preemption on lower-priority users.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.63 Penalty time for handover failure

Full Name
Penalty time for handover failure
Abbreviated Name
hoFailPenalTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a penalty time allocated to a target cell

when an MS fails to be handed over to the cell. During this time
period, the priority for the inter-cell handover occurring in the BSC
is decreased. This parameter specifies the length of the penalty
time period.
Instance
Cell
Related FG
1..100
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2401
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
A longer penalty time period may cause a longer delay in handovers
to the local cell.
The default value is set to ensure better cells are selected.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.64 Layer control value for handover on traffic

Full Name
Layer control value for handover on traffic
Abbreviated Name
trafficHoLayrCtl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the layer for traffic-based handovers.

This parameter, together with the subsequent band control value,
specifies the frequency band and layer of the neighbor cell selected
during a traffic-based handover.
When the traffic handover condition is satisfied, four options are
available for call selection and candidate cell arrangement in terms
of layer relation. This parameter specifies which option is selected.
During the process of traffic-based handover control, the priority
specified by this parameter is higher than that of neighbor cells.
2-2402
SJ-20140527134815-013|2015-03-10(R1.1)
0: N: Undefined
1: SAME, Same layer of the home cell
2: UPPER, Upper layer of the home cell
3: LOWER, Lower layer of the home cell
Instance
Cell
Related FG
0: Undefined
1: Same layer of the home cell
2: Upper layer of the home cell
3: Lower layer of the home cell
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, the default value is set to hand over to the cell at the
same layer. The traffic-based handover can be performed at

different layers as required.
Generally, the default value is set to hand over to the cell at the
Reason
same layer. The traffic-based handover can be performed at

different layers as required.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2-2403
SJ-20140527134815-013|2015-03-10(R1.1)
2.47.65 Frequency control value for handover on traffic

Full Name
Frequency control value for handover on traffic
Abbreviated Name
trafficHoFreqCtl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the layer control value for traffic-based

handovers, that is, which frequency band is handed over to.
Primary GSM900 frequency band (ARFCN = 1124)
Extended GSM900 frequency band (ARFCN = 0124, 9751023)
DCS1800 frequency band (ARFCN = 512885)
PCS1900 frequency band (ARFCN = 512810)
GSM850 frequency band (ARFCN = 128251)
Instance
Cell
Related FG
0: GSM900
1: EXT900
2: DCS1800
4: PCS1900
7: GSM850
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
This parameter is configured based on the real scenario.
The default value is set based on the real scenario.
Reason
Change take effect
No
2-2404
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Control
N/A
2.47.66 Threshold of traffic for handover

Full Name
Threshold of traffic for handover
Abbreviated Name
trafficThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
If the PDCH occupation rate (the number of occupied PDCH

channels/total number of PDCH channels, including dynamic PDCH
channels but excluding blocked idle channels) of a cell is greater
than the value of this parameter, the cell is considered too busy, and
a traffic-based handover is triggered for the cell.
Instance
Cell
Related FG
0..100
Unit
Default Value
80
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2405
SJ-20140527134815-013|2015-03-10(R1.1)
If this parameter is set too high, congestion in the local cell may
occur.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.67 Traffic handover threshold

Full Name
Traffic handover threshold
Abbreviated Name
trafficLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used for traffic-based handovers during PS

services. If the level of a neighbor cell is higher than this threshold
(RxLevelNcell - DwlinkLevel >= TrafficLevThs), and the level of
the neighbor cell fulfills the minimum access level condition, the
selected MS can be handed over to the neighbor cell.
Instance
Cell
Related FG
0..48
Unit
N/A
Default Value
24
Related Parameters
N/A
2-2406
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For high outgoing handover traffic, this parameter should be set to a
low value; otherwise, it is set to a high value. This threshold must

be lower than the reverse PBGT threshold; otherwise, a ping-pong
handover may occur.
In the scenarios with high traffic, this parameter should be set to
a lower value.
The default value is set to balance traffic to ensure the level of the
Reason
target cell is not lower than that of the serving cell. If this threshold
is set too high, it is difficult to select an MS for outgoing handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.68 Level offset during penalty

Full Name
Level offset during penalty
Abbreviated Name
penaltyLevOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2407
SJ-20140527134815-013|2015-03-10(R1.1)
Description
During the penalty period of the target cell which an MS with PS

services fails to be handed over to, this parameter indicates the
offset on the downlink level of the target cell.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the number of neighbor cells is large, this parameter can be set to
a large value; otherwise, it is set to a small value.
Generally, the cell during penalty period can be no longer placed on
Reason
the top of the handover list if other neighbor cells with good signals
are available.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.69 Uplink interference quality offset

Full Name
Uplink interference quality offset
Abbreviated Name
qoffSetUl
2-2408
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter, ranging from 0 to 6, indicates a quality offset of

3 to 3.
During PS services, the uplink receiving quality is poor and the level
is high. Consequently, an MS falls into the predefined interference
area. An uplink interference handover can be performed if
AvRxQualUL(s) is less than InterfFQSS(s).
Where, AvRxQualUL(s) is the average uplink bit error rate
(MEAN_BEP), and InterfFQSS(s) is the bit error rate threshold
(FQSS) calculated by AvRxLevUL(s). The calculation formulas are
as follows:
InterfFQSS(s)=0 if AvRxLevUL(s)<XOffset+20
=YOffset+9 if XOffset+20<=AvRxLevUL(s)<XOffset+30
=YOffset+5 if XOffset+40<=AvRxLevUL(s)
XOffset and YOffset mean SOffSetUl and QOffSetUl respectively.
Instance
Cell
Related FG
0..6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

and helps initiate a quality handover.
Reason
Change take effect
No
2-2409
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Control
N/A
2.47.70 Uplink interference level offset

Full Name
Uplink interference level offset
Abbreviated Name
soffSetUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter, ranging from 0 to 20, indicates a level offset of -10

to 10 dB.
During PS services, the uplink receiving quality is poor and the level
is high. Consequently, an MS falls into the predefined interference
area. An uplink interference handover can be performed if
AvRxQualUL(s) is less than InterfFQSS(s).
Where, AvRxQualUL(s) is the average uplink bit error rate
(FQSS) calculated by AvRxLevUL(s). The calculation formulas are
as follows:
InterfFQSS(s)=0 if AvRxLevUL(s)<XOffset+20
=YOffset+5 if XOffset+40<=AvRxLevUL(s)
XOffset and YOffset mean SOffSetUl and QOffSetUl respectively.
Instance
Cell
Related FG
0..20
Unit
N/A
Default Value
15
2-2410
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
value helps decrease the level requirements of quality handovers

and a quality handover can be easily initiated.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.71 Downlink interference quality offset

Full Name
Downlink interference quality offset
Abbreviated Name
qoffSetDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2411
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter, ranging from 0 to 6, indicates an offset of 3 to 3.

During PS services, the downlink receiving quality is poor and
the level is high. Consequently, an MS falls into the predefined
interference area. A downlink interference handover can be
performed if AvRxQualDL(s) is less than InterfFQSS(s).
Where, AvRxQualDL(s) is the average downlink bit error rate
(FQSS) calculated by AvRxLevDL(s). The calculation formulas are
as follows:
InterfFQSS(s)=0 if AvRxLevDL(s)<XOffset+20
=YOffset+9 if XOffset+20<=AvRxLevDL(s)<XOffset+30
=YOffset+5 if XOffset+40<=AvRxLevDL(s)
XOffset and YOffset mean SOffSetDl and QOffSetDl respectively.
Instance
Cell
Related FG
0..6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

and helps initiate a quality handover.
Reason
Change take effect
No
Access
Read/Write
2-2412
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Control
N/A
2.47.72 Downlink interference level offset

Full Name
Downlink interference level offset
Abbreviated Name
soffSetDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter, ranging from 0 to 20, indicates a level offset of -10

to 10 dB.
During PS services, the downlink receiving quality is poor and
the level is high. Consequently, an MS falls into the predefined
interference area. A downlink interference handover can be
performed if AvRxQualDL(s) is less than InterfFQSS(s).
Where, AvRxQualDL(s) is the average downlink bit error rate
(FQSS) calculated by AvRxLevDL(s). The calculation formulas are
as follows:
InterfFQSS(s)=0 if AvRxLevDL(s)<XOffset+20
=YOffset+5 if XOffset+40<=AvRxLevDL(s)
XOffset and YOffset mean SOffSetDl and QOffSetDl respectively.
Instance
Cell
Related FG
0..20
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
2-2413
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
value helps decrease the level requirements of quality handovers

and a quality handover can be easily initiated.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.47.73 Invalid intra-handover time

Full Name
Invalid intra-handover time
Abbreviated Name
tMaxIHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2414
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When intra-cell interference occurs on an MS for the first time, the

timer TMaxIHo is started. If another handover occurs before the
timer expires, the previous handover is not considered to improve
the interference. The counter IHoCount is incremented by one
and the timer TMaxIHo is restarted. For the handover occurred
after the timer expires, the previous handover is considered to be
valid. The counter IHoCount is reset to 0 and the timer TMaxIHo is
restarted. If the counter IHoCount reaches the value of MaxIHo, it is
unnecessary to continue to attempt an interference handover but
an inter-cell handover instead.
Instance
Cell
Related FG
1..100
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is set too small, an invalid handover may be
decided as a valid handover.

If this parameter is set too large, a valid handover may be decided
as an invalid handover.
The default value is set because the handovers that occur
Reason
repeatedly within three seconds are generally considered as too

frequent handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control

2-2415
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.47.74 MAX count of invalid intra-handover

Full Name
MAX count of invalid intra-handover
Abbreviated Name
maxIHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When intra-cell interference occurs on an MS for the first time, the

timer TMaxIHo is started. If another handover occurs before the
timer expires, the previous handover is not considered to improve
the interference. The counter IHoCount is incremented by one
and the timer TMaxIHo is restarted. For the handover occurred
after the timer expires, the previous handover is considered to be
valid. The counter IHoCount is reset to 0 and the timer TMaxIHo is
restarted. If the counter IHoCount reaches the value of MaxIHo, it is
unnecessary to continue to attempt an interference handover but
an inter-cell handover instead.
Instance
Cell
Related FG
1..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2416
SJ-20140527134815-013|2015-03-10(R1.1)
If this parameter is set too small, a valid handover may be decided
as an invalid handover, resulting in call drops due to MS handover

penalty.
If this parameter is set too large, invalid interference handovers may
be omitted and the number of invalid handovers may increase.
The default value is set because the handovers that occur more than
Reason
consecutive three times are generally considered as too frequent

handovers.
Change take effect
No
Access
Read/Write
OMC Access path

Control
N/A
2.48 Trx(GTrx)
2.48.1 TRX ID
Full Name
TRX ID
Abbreviated Name
GTrxId
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a TRX ID.
Instance
BSC
Related FG
N/A
1..60
Unit
N/A
2-2417
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Trx
N/A
2.48.2 TRX Sequence

Full Name
TRX Sequence
Abbreviated Name
GTrxSeq
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a TRX ID.
Instance
Trx
Related FG
N/A
1..60
2-2418
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value of this parameter is generated by the system by default.
The default value is automatically generated by the system.
Reason
Change take effect
Yes
Access
Restricted
OMC Access path

N/A
2.48.3 GBtsPanel DN
Full Name
GBtsPanel DN
Abbreviated Name
refGBtsPanel
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of the referenced carrier panel.
Instance
Trx
Related FG
N/A
2-2419
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used in the BTSs prior to V3.
This parameter is used in the BTSs prior to V3.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.48.4 GSubCell DN
Full Name
GSubCell DN
Abbreviated Name
refGSubCell
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of the referenced sub-cell.
Instance
Trx
2-2420
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
data planning.
Reason
data planning.
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.48.5 TRX type

Full Name
TRX type
Abbreviated Name
trxType
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
2-2421
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the type of a transceiver, common TRX for

common cells and extended TRX for extended cells.
For a common cell, this parameter is set to Common TRX.
For an extended cell not supporting sub-cells, this parameter is set
to Extended TRX. For an extended cell supporting sub-cells, the
TRX type of sub-cell 1 must be set to Extended TRX and sub-cell 2
has no special requirements for the TRX type.
Instance
TRX
Related FG
0: Common TRX
1: Extended TRX
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
This parameter is set to a fixed value and no modification is needed.
This parameter is set to a fixed value and no modification is needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2422
SJ-20140527134815-013|2015-03-10(R1.1)
2.48.6 Static power level

Full Name
Static power level
Abbreviated Name
pwrReduction
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the static power level of a transceiver

(TRX). Generally, static power control is performed on the basis of
the transmit power level. The actual maximum transmit power (Pn)
of the TRX depends on the restriction specified by this parameter
and the maximum transmit power. Dynamic power control is
implemented based on the maximum transmit power (Pn). A
negative value indicates the power sharing gain of an SDR.
Instance
TRX
Related FG
ZGB-04-02-002 Static BTS Power Control
0: Max output power

1: Max output power -2dB
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2423
SJ-20140527134815-013|2015-03-10(R1.1)
For a cell with weak coverage, a higher static power helps decrease
the call drop rate and improve the call quality.

For an overshooting cell, a static power decrease of 2 dB to 4
dB helps reduce interference in the network and improve the call
quality. For a severely overshooting cell in a high-traffic urban, the
static power can be decreased by 2 dB to 6 dB. In this case, the
settings of all the carriers in the cell must be the same.
For a cell with broad coverage, or a cell located in a rural area or
place with complicated topography, high static power helps increase
the SD/TCH assignment success rate, call setup success rate,
coverage, and the paging success rate in the core network. For
an SDR site, the static power level is configured on the OMCB. A
negative value indicates the power sharing gain. The maximum
power sharing gain is 3 dB. A larger gain can be set if there are
many carriers on the RRU; otherwise, a smaller gain should be set.
The default value is set to 0 because the maximum transmit power
Reason
is preferred in the network.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.48.7 BCCH Mark

Full Name
BCCH Mark
Abbreviated Name
BCCHMARK
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
One and only one BCCH carrier frequency must be configured for a
cell.
2-2424
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
TRX
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
No modification is needed.
This parameter is a fixed attribute generated when the BCCH carrier
Reason
has been configured.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.48.8 Assign Priority of the Trx

Full Name
Assign Priority of the Trx
Abbreviated Name
trxPriority
Managed Object
Trx(GTrx)
3GPP Name
N/A
2-2425
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the priority for allocating carriers of

the same type, 1 for the highest priority. The channels on the
carriers with higher priorities should be prefered during CS channel
allocation.
Instance
TRX
Related FG
ZGO-03-02-002 Enhancement on CS Channel Allocation
1..5
Unit
N/A
Default Value
{BCCHMARK==0}3,
{BCCHMARK==1}1
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A CS channel is allocated based on the priority of the carrier. The
priority of an ordinary carrier is lower than that of a BCCH carrier.

If some carriers should receive priority in absorbing CS traffic, the
priority of the carriers can be increased.
The default value is set because the priority of an ordinary carrier is
Reason
lower than that of a BCCH carrier.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2-2426
SJ-20140527134815-013|2015-03-10(R1.1)
2.48.9 Power level

Full Name
Power level
Abbreviated Name
powerClass
Managed Object
Trx(GTrx)
3GPP Name
power class(45.005)
3GPP Reference
N/A
Description
This parameter indicates the power level of a carrier. The value of

it can be converted to the actual power value to calculate the path
loss and CI value in a measurement report.
Instance
Related FG
TRX
1..8
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
The configuration of this parameter varies with the BTS with due
consideration of the combiner loss.
The default value is set because the carrier with the power level
Reason
of 3 is commonly used.
Change take effect
No
Access
Read/Write
OMC Access path

2-2427
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.48.10 Pair Trx

Full Name
Pair Trx
Abbreviated Name
refGTrx
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
During a PS service, if an MS supports DLDC, the BSC can allocate

two TRXs for the MS to speed up the service process. The two
allocated TRXs should be paired first. This parameter indicates a
pair of allocatable carriers during DLDC services.
Instance
Trx
Related FG
ZGO-03-06-004 DLDC
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
data planning.
Reason
Change take effect
No
2-2428
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.48.11 RTTI preference

Full Name
RTTI preference
Abbreviated Name
rttiPrefer
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the priority is given to a carrier

by an RTTI MS. If the priority is the carrier, the carrier is allocated
to implement services when the MS supporting RTTI establishes
RTTI TBF. If the MS not supporting RTTI implements PS services,
the carrier is selected for allocation only when there are no other
carriers available for allocation.
Instance
TRX
Related FG
ZGO-03-06-001 RTTI
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
RTTISupport
This parameter is effective only when the RTTISupport parameter at
Parameters
BSC and cell levels is enabled.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2429
SJ-20140527134815-013|2015-03-10(R1.1)
needed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.48.12 TSC
Full Name
TSC
Abbreviated Name
tsc
Managed Object
Trx(GTrx)
3GPP Name
Training Sequence Code
3GPP Reference
N/A
Description
This parameter indicates the Training Sequence Code (TSC) in a

timeslot. There are eight TSCs available with low correlation among
them. The TSC is used as delay compensation reference for the
adaptive equalizer at the receiver. For the timeslot where the BCCH
is located, this parameter must equal the BCC of the cell.
Instance
TS
Related FG
N/A
0..7
Unit
N/A
Default Value
N/A
Related Parameters
BCC
The TSC value for the BCCH channel must be the same as the
Parameters
BCC value.
2-2430
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be configured based on radio network
planning.
N/A
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.48.13 TSC2
Full Name
TSC2
Abbreviated Name
tsc2
Managed Object
Trx(GTrx)
3GPP Name
Training Sequence Code
3GPP Reference
N/A
Description
This parameter is used when two non-VAMOS MSs are paired. One
MS uses TSC and the other uses TSC2.
Instance
TS
Related FG
0..7
Unit
N/A
Default Value
N/A
2-2431
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
SupportVAMOS,
TSC
This parameter is valid only when the SupportVAMOS parameter
Parameters
is enabled and the value of this parameter must be different from

the TSC value.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is effective only when the VAMOS function is
enabled and the value of this parameter must be different from the
TSC value.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.48.14 Dynamic Trx

Full Name
Dynamic Trx
Abbreviated Name
DynamicTrx
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
2-2432
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies whether the carrier is a dynamic carrier. A

dynamic carrier is allocated with a frequency only when the traffic
volume is high and the dynamic frequency allocation function is
enabled.
Instance
TRX
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
R_BSCDYNFREQ.SupportDynamicFreq
R_BTS.FreqPoolId
R_TRX.BCCHMARK
R_TRX.FhsId
R_TRX.TSFHSUPPORT
R_TRX.CAARFCNLIST
Only when R_BSCDYNFREQ.SupportDynamicFreq is 1, the carrier
Parameters
can be set to a dynamic carrier.

Only when FreqPoolId of the cell that the carrier belongs to is not 0,
the carrier can be set to a dynamic carrier.
Only when the carrier is not a BCCH carrier, it can be set to a
dynamic carrier.
A hopping carrier cannot be set to a dynamic carrier. For a hopping
carrier, R_TRX.FhsId is valid, or R_TRX.FhsId is invalid but
TSFHSUPPORT is 1.
A dynamic carrier should be set to an invalid frequency (65535).
Co-/adjacent-frequency check is not performed on the frequency
set for this carrier.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In general, a few non-dynamic carriers and dynamic carriers are set
in a cell when the dynamic frequency allocation function is enabled.
A dynamic carrier is set only when the dynamic frequency allocation
Reason
function is used.
Change take effect
No
2-2433
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.48.15 ARFCN
Full Name
ARFCN
Abbreviated Name
arfcn
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequency of the transceiver.
Instance
TRX
Related FG
0..1023
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
planning.
N/A
Reason
Change take effect
2-2434
SJ-20140527134815-013|2015-03-10(R1.1)
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.48.16 GHoppingFrequency DN
Full Name
GHoppingFrequency DN
Abbreviated Name
refGHoppingFrequency
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
The hopping mode configured in the hopping system is selected

as the hopping system ID when RF hopping is configured. The
transceiver uses the MA frequency point list configured in the
hopping system.
Instance
TRX
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2435
SJ-20140527134815-013|2015-03-10(R1.1)
planning.
N/A
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.48.17 GHoppingBaseband DN
Full Name
GHoppingBaseband DN
Abbreviated Name
refGHoppingBaseband
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of the referenced baseband

hopping system.
Instance
Trx
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
2-2436
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
data planning.
Reason
data planning.
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.48.18 Combiner Loss

Full Name
Combiner Loss
Abbreviated Name
CombinerLoss
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
When the BTS uses a combiner, this parameter indicates the output
signal loss of the carrier caused by the combiner.
Instance
TRX
Related FG
0..48
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
2-2437
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured based on the actual output signal loss
of the carrier caused by the combiner.
The default value is configured as appropriate.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.48.19 HoppingFrequency MAIO

Full Name
HoppingFrequency MAIO
Abbreviated Name
maio
Managed Object
Trx(GTrx)
3GPP Name
Mobile Allocation Index Offset
3GPP Reference
N/A
Description
During communication, the carrier number used on the air interface

is an element in the MA set. The Mobile Allocation Index (MAI) (0
<= MAI <= n-1) is a variable for determining a definite element in
the MA set.
According to the frequency hopping algorithm defined in GSM 05.02,
MAI is the function of the following variables: TDMA Frame Number
(FN) or Reduced TDMA Frame Number (RFN), frequency Hopping
Serial Number (HSN), and Mobile Allocation Index Offset (MAIO).
MAIO is an initial offset of MAI and is used for preventing several
channels from contending for the same carrier simultaneously.
2-2438
SJ-20140527134815-013|2015-03-10(R1.1)
Generally, several basic frequency hopping units (timeslots or

TDMA frames) constitute a frequency hopping group. They have
the same MA and HSN but different MAIOs. Therefore, the same
MA and HSN are put in the FHS/MA table. If there is no frequency
hopping occurred in the frequency hopping group corresponding to
the timeslots, MAIO of the timeslot is invalid.
Instance
TRX
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
planning.
N/A
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.48.20 Support TS freq-hopping

Full Name
Support TS freq-hopping
2-2439
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
TsFHSupport
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to support TS freq-hopping (The

TS frequency hopping function can be enabled even if the carrier
frequency is configured not to conduct frequency hopping). Each
TS can be configured to enable or disable the frequency hopping
function. If the frequency hopping function is disabled, the time slot
use the frequency point configured for the carrier frequency.
Instance
Trx
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
siteType
Support of timeslot frequency hopping can be configured only in the
Parameters
case of SDR base station (T_PHSITE.siteType=18).
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is usually used in tests only and should be set
according to the customer needs.
The TS frequency hopping function is seldom used. This function
Reason
should be disabled unless it is needed.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-2440
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.48.21 IFTA TRX

Full Name
IFTA TRX
Abbreviated Name
IFTATRX
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether this TRX is an IFTA TRX. When

the IFTA function is enabled, some TRXs of a cell are configured
as IFTA TRXs where the intelligent frequency timeslot allocations
are implemented.
Instance
TRX
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
R_TRX.BCCHMARK
R_TS.TsChannelComb
The BCCH TRX cannot support IFTA.
Parameters
The timeslot channel combination on the IFTA TRX can only be

configured as follows:
0: Full rate traffic channel
1: TCH/H(0,1)+FACCH/H(0,1)+SACCH/TH(0,1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2441
SJ-20140527134815-013|2015-03-10(R1.1)
The number of IFTA TRXs depends on the network planning. The
BCCH TRX in a cell is the non-IFTA TRX definitely, but other

channels can be the IFTA TRX or the non-IFTA TRX. The non-IFTA
TRX provides the SDCCH/PDCCH and some TCHs, while the IFTA
TRX provides the other TCHs.
The IFTA function is rarely used. Only some of TRXs are used for
Reason
IFTA in the cell when the IFTA function is selected.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.48.22 Use When IFTA Not Online

Full Name
Use When IFTA Not Online
Abbreviated Name
UseWhenIFTAOff
Managed Object
Trx(GTrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to use IFTA TRXs when IFTA is

offline.
With the limited frequency resource, the network capacity decreases
if IFTA is not used, therefore, some TRXs can be disabled when
IFTA is offline.
Instance
TRX
Related FG
0..1
0: No
1: Yes
Unit
N/A
2-2442
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
With the limited frequency resource, the network capacity decreases
if IFTA is not used. Therefore some TRX can be set to disabled

when IFTA is offline, to ensure the network performance indexes
such as success rate of allocation and handover and the call drop
rate, but the congestion may increases.
The default value is set to 1, which means this TRX can be used
Reason
even when IFTA is offline. In this case, more available channels

are provided.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.49 Ts(GTs)
2.49.1 Ts ID
Full Name
Ts ID
Abbreviated Name
GTsId
Managed Object
Ts(GTs)
2-2443
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a timeslot ID.
Instance
BSC
Related FG
N/A
0..7
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Trx->Ts
N/A
2.49.2 TS Sequence
Full Name
TS Sequence
Abbreviated Name
GTsSeq
Managed Object
Ts(GTs)
2-2444
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timeslot number.
Instance
Ts
Related FG
N/A
0..7
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
Yes
Access
Read
OMC Access path

N/A
2.49.3 TS Channel Combination

Full Name
TS Channel Combination
Abbreviated Name
tsChannelComb
2-2445
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
Ts(GTs)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter defines the combination type of timeslot channels.

The correlation with the following parameters is as follows:
Cell broadcast short message (SmsCbUsed)
If the SmsCbUsed parameter is set to No, the system automatically
searches the combination type of all TRX timeslot channels in the
cell. If a CBC channel exists, the system changes the channel type
to SDCCH.
If the SmsCbUsed parameter is set to Yes, the system automatically
searches the combination type of all TRX timeslot channels in the
cell. When a non-BCCH channel for the carrier is detected, the
system changes the channel type to SDCCH+CBCH.
GPRS supported (PsSupport)
If the PsSupport parameter is set to Not Support, GPRS is not
supported. The system automatically changes all the channels with
the TRX timeslot combination type of PS in the cell to TCH.
Common control channel (CcchConf)
If the CcchConf parameter is set to "CCCH uses one physical
channel, combined with SDCCH", the timeslot channel combination
type for TS 0 must be set to one of the following two options:
BCCH+SDCCH/4 and BCCH+SDCCH/4+CBCH.
If the CcchConf parameter is set to "CCCH uses one physical
channel, not combined with SDCCH", the timeslot channel
combination type for TS 0 must be set to one of the following two
options: FCCH+SCH+BCCH+CCCH and BCCH+CCCH.
If the CcchConf parameter is set to "CCCH uses two physical
channels, not combined with SDCCH", the timeslot channel
combination type for TS 0 and TS 2 must be set to the combination
of the following two options: FCCH+SCH+BCCH+CCCH and
BCCH+CCCH.
If the CcchConf parameter is set to "CCCH uses three
physical channels, not combined with SDCCH", the timeslot
channel combination type for TS 0, TS 2, and TS 4 must
be set to the combination of the following two options:
FCCH+SCH+BCCH+CCCH and BCCH+CCCH.
If the CcchConf parameter is set to "CCCH uses four
physical channels, not combined with SDCCH", the timeslot
channel combination type for TS 0, TS 2, TS 4, and TS 6
must be set to the combination of the following two options:
FCCH+SCH+BCCH+CCCH and BCCH+CCCH.
2-2446
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
TS
Related FG
ZGB-03-02-005 Static Channel Management

ZGO-03-02-008 EGPRS on BCCH-TRX Configurable
0: TCH/F+FACCH/F+SACCH/TF(TCH/F+FACCH/F+SACCH/TF)
1: TCH/H\(0,1\)+FACCH/H\(0,1\)+SACCH/TH\(0,1\)(TCH/H\(0,1\)+
FACCH/H\(0,1\)+SACCH/TH\(0,1\))
3: SDCCH/8+SACCH/C8(SDCCH/8+SACCH/C8)
4: FCCH+SCH+BCCH+CCCH(FCCH+SCH+BCCH+CCCH)
5: BCCH+SDCCH/4(BCCH+SDCCH/4)
6: BCCH+CCCH(BCCH+CCCH)
7: BCCH+SDCCH/4+CBCH(BCCH+SDCCH/4+CBCH)
8: SDCCH + CBCH(SDCCH + CBCH)
14: PDTCH+PACCH+PTCCH(PDTCH+PACCH+PTCCH)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
planning.
N/A
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2-2447
SJ-20140527134815-013|2015-03-10(R1.1)
2.49.4 MAIO
Full Name
MAIO
Abbreviated Name
maio
Managed Object
Ts(GTs)
3GPP Name
Mobile Allocation Index Offset
3GPP Reference
N/A
Description
During communication, the carrier number used on the air interface

is an element in the MA set. The Mobile Allocation Index (MAI) (0
<= MAI <= n-1) is a variable for determining a definite element in
the MA set.
According to the frequency hopping algorithm defined in GSM 05.02,
MAI is the function of the following variables: TDMA Frame Number
(FN) or Reduced TDMA Frame Number (RFN), frequency Hopping
Serial Number (HSN), and Mobile Allocation Index Offset (MAIO).
MAIO is an initial offset of MAI and is used for preventing several
channels from contending for the same carrier simultaneously.
Generally, several basic frequency hopping units (timeslots or
TDMA frames) constitute a frequency hopping group. They have
the same MA and HSN but different MAIOs. Therefore, the same
MA and HSN are put in the FHS/MA table. If there is no frequency
hopping occurred in the frequency hopping group corresponding to
the timeslots, MAIO of the timeslot is invalid.
Instance
TS
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
planning.
2-2448
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.49.5 Dynamic TS
Full Name
Dynamic TS
Abbreviated Name
changeable
Managed Object
Ts(GTs)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a timeslot is dynamic. If it is set

to Yes, the timeslot is dynamic and can be converted to a PDCH
channel for PS services or be directly used for CS services.
If it is set to No, the timeslot is of fixedly configured type.
This parameter is used for all timeslots configured in batches in a
carrier and for a single timeslot during configuration.
Instance
TS
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2449
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The timeslot attribute can be changed to static TCH channel or
PDCH channel based on the traffic of CS or PS services, or as

required by customers. It is not necessary to set this parameter to
Yes to enable the dynamic half-rate function.
The timeslot attribute is dynamic by default. It can be changed to
Reason
static TCH channel or PDCH channel based on the traffic of CS or

PS services, or as required by customers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.49.6 Ps Service Preference Property

Full Name
Ps Service Preference Property
Abbreviated Name
preferPsService
Managed Object
Ts(GTs)
3GPP Name
N/A
3GPP Reference
N/A
2-2450
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates preference attributes of a channel for the

GPRS, EDGE, and EDGE2 services during PS services.
255 (No preference): Any PS service type can occupy the channel.
0 (GPRS preference): If the HybridOccuSupp parameter is
disabled, the EDGE service cannot occupy the channel. If the
HybridOccuSupp parameter is enabled, the EDGE service can
occupy the channel with a lower priority.
1 (EDGE preference): If the HybridOccuSupp parameter is
disabled, the GPRS service cannot occupy the channel. If the
HybridOccuSupp parameter is enabled, the GPRS service can
occupy the channel with a lower priority.
2 (EDGE dedicated): The GPRS service cannot occupy the channel.
Instance
TS
Related FG
ZGO-03-02-011 Channel Repacking
0: GPRS preference
1: EDGE preference
2: EDGE dedicated
255: No preference
Unit
N/A
Default Value
255
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If there are severe requirements on the EDGE service rate, it is
recommended to configure a certain number of dedicated static

EDGE channels, or to configure preferred EDGE and GPRS
channels to separate these two services from each other.
By default, GPRS and EDGE services share the same dynamic
Reason
timeslot.
Change take effect
No
0
2-2451
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.49.7 Pair No.

Full Name
Pair No.
Abbreviated Name
pairNo
Managed Object
Ts(GTs)
3GPP Name
N/A
3GPP Reference
N/A
Description
During a PS service, the BSC can allocate paired wireless timeslot

for the MS supporting RTTI. This parameter indicates the pair
number to which timeslots belong. The timeslots for pairing should
be predefined.
Instance
Ts
Related FG
ZGO-03-06-001 RTTI
{GTsSeq==0}[1][255],
{GTsSeq==1}[1][255],
{GTsSeq==2}[2][255],
{GTsSeq==3}[2][255],
{GTsSeq==4}[3][255],
{GTsSeq==5}[3][255],
{GTsSeq==6}[4][255],
{GTsSeq==7}[4][255]
Unit
N/A
Default Value
255
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2452
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
data planning.
Reason
data planning.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.49.8 USF Mode Used In RTTI

Full Name
USF Mode Used In RTTI
Abbreviated Name
usfMode
Managed Object
Ts(GTs)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the USF mode used by RTTI is

RTTI USF or BTTI USF.
Instance
Ts
Related FG
ZGO-03-06-001 RTTI
0: BTTI USF
1: RTTI USF
255: Not Valid
Unit
N/A
Default Value
255
Related Parameters
N/A
2-2453
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set to 1 for RTTI USF allocation of channels, 0 for
BTTI USF allocation, and 255 as a default value.
The default value is set to allocate BTTI.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.49.9 PDCH Precedence

Full Name
PDCH Precedence
Abbreviated Name
pdchPrecedence
Managed Object
Ts(GTs)
3GPP Name
N/A
3GPP Reference
N/A
2-2454
SJ-20140527134815-013|2015-03-10(R1.1)
Description
For dynamic timeslots, if this parameter is configured to Yes, and the

timeslots are occupied by PS services, the channel is not preempted
by CS services. In this case, this parameter helps improve the
congestion-related access indexes and the throughput of the cell
where CS services frequently preempt PDTCH.
For dynamic timeslots, if this parameter is configured to Yes, and
the PSPrmpCSSupport parameter is enabled, the PS services
can preempt the channel allocated to the CS services when the
PS services fail to request PS service channel due to insufficient
resources.
Instance
TS
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For dynamic timeslots, if this parameter is configured to Yes, and the
timeslots are occupied by PS services, the channel is not preempted

by CS services. In this case, this parameter helps improve the
congestion-related access indexes and the throughput of the cell
where CS services frequently preempt PDTCH.
If the actual radio channel resources are extremely insufficient,
the channels of this type can be configured or, if necessary,
the preemption of CS service channel by PS services can be
initiated to ensure the traffic of the PS services. In this case, the
PSPrmpCSSupport parameter should be enabled.
The default value is set because it is generally not necessary to
Reason
configure the dynamic channels of this type.
Change take effect
No
2-2455
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.49.10 GHoppingFrequency DN
Full Name
GHoppingFrequency DN
Abbreviated Name
refGHoppingFrequency
Managed Object
Ts(GTs)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequency hopping system used for a

time slot when the TsFHSupport parameter is configured to enable
the TS frequency hopping function.
Instance
Ts
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
MAIO,TSFHSID,tsChannelComb,Changeable
In the case of frequency hopping (including timeslot frequency
Parameters
hopping), the TCH carrier under the same cell, MAIO and frequency
hopping system of the same timeslot must not be all the same. For
example, it is not allowed for both timeslot 0 of TRX1 and timeslot 0
of TRX2 to use frequency hopping system 1 and MAIO0.
In the case of frequency hopping, the timeslots with the
configuration of PDTCH (TsChannelComb=14) and dynamic TCH
(TsChannelComb=0 and Changeable=1) under the same TCH cell
and the same cell should have the same MAIO and frequency
hopping system. Timeslots configured as other types can have
different MAIO and frequency hopping systems.
2-2456
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
To be configured in light of the customer's frequency hopping
system.
No default value. The frequency hopping system is configured by
Reason
users.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.49.11 Is Reserved
Full Name
Is Reserved
Abbreviated Name
Isrsv
Managed Object
Ts(GTs)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a TS is the reserved channel

for a subscriber with a high priority. This configuration cannot be
effective until the parameter USERESERVEDCHAN is set to 1.
Instance
TS
Related FG
ZGO-01-03-001 eMLPP
0: No
1: Yes
Unit
N/A
2-2457
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
(1)GBssFunction.USERESERVEDCHAN
(2)tsChannelComb,Changeable
(1) IsRsv works only if USERESERVEDCHAN=1.
Parameters
(2) IsRsv can be set to 1 only if tsChannelComb=0 and also

Changeable=0.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Disabled by default.Users can select reserved channels (with good
RQ), which can be configured on the static TCHF channel and

preferably at the edge of the timeslot.
It is a special functional switch, disabled by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.50 Adjacent GSM Cell Configuration(GGsmRelation)

2.50.1 Relation type
Full Name
Relation type
Abbreviated Name
RelationType
Managed Object
Adjacent GSM Cell Configuration(GGsmRelation)

3GPP Name
N/A
2-2458
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the type of the relation between a neighbor

cell and source cell, including handover, reselection, and handover
and reselection.
Instance
Cell
Related FG
0: Handover and reselect

1: Reselect
2: Handover
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
data planning.
Reason
data planning.
Change take effect
No
Access
Restricted
OMC Access path

Information Configuration->Adjacent Relation Configuration>Adjacent GSM Cell Configuration
V6.50.101/V6.30.101
N/A
2.50.2 DN of source Gsmcell

2-2459
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
DN of source Gsmcell
Abbreviated Name
refGGsmCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of an internal cell or external cell.

Users can select it from the interface and set the relation type to
reselection and handover cell.
Instance
Cell
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
data planning.
Reason
data planning.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2460
SJ-20140527134815-013|2015-03-10(R1.1)
2.50.3 DN of source ExternalGsmcell

Full Name
DN of source ExternalGsmcell
Abbreviated Name
refGExternalGsmCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN of an internal cell or external cell.

Users can select it from the interface and set the relation type to
reselection and handover cell.
Instance
Cell
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
data planning.
Reason
data planning.
Change take effect
No
Access
Read/Write
OMC Access path

2-2461
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.50.4 Relation Sequence

Full Name
Relation Sequence
Abbreviated Name
GGsmRelationSeq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the sequence number of a neighbor cell

used inside the iBSC for neighbor cell management.
Instance
Cell
Related FG
{RelationType==1}[1..64],
{RelationType==0}[129..192]
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-2462
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read
OMC Access path

N/A
2.50.5 Priority of handover

Full Name
Priority of handover
Abbreviated Name
HoPriority
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
During a handover, cell priority must be considered when candidate

cells are sorted. The sequence of candidate cells depends on three
factors: priority, traffic, and radio conditions. Priority and traffic are
two major factors that influence the sorting of candidate cells. If
these two factors lead to the same cell sequence, the candidate
cells are sorted again in accordance with their radio conditions. A
larger parameter value indicates a higher cell priority.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2463
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is generally set to 3, the same as the cell priority.
This parameter is generally set to 3, the same as the cell priority.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.6 MIN power level for handover access

Full Name
MIN power level for handover access
Abbreviated Name
RxLevMin
Managed Object

3GPP Name
RXLEV_ACCESS_MIN
3GPP Reference
N/A
Description
This parameter indicates the minimum Rx level on the BCCH in a

cell that allows an MS to be handed over to the local cell. It is one of
the parameters for determining the preferential cell during handover
control. The MS in the cell monitors the Rx level on the BCCH in
each neighbor cell. A neighbor cell can be a candidate target cell
for handovers only when its Rx level is greater than the minimum
Rx level. A handover decision may be made when the required
minimum Rx level in a neighbor cell is greater than the required
minimum Rx level in the local cell. This indicates that the MS is
located on the cell boundary.
2-2464
SJ-20140527134815-013|2015-03-10(R1.1)
coverage of the cell. However, if this parameter is set too high, dead
zones may occur on the boundary between cells. Generally, an Rx
level no higher than -90 dB is recommended for traffic balancing.
On the initial operation stage of the network, this parameter can be
set to 10 (-101 dBm to -100 dBm) or a lower value, which is higher
than the receiver sensitivity (-102 dBm) of the MS. After the network
capacity is expanded or major coverage problems are resolved, this
parameter can be increased by 2.
Instance
Cell
Related FG
0: <-110
1: -110~-109
2: -109~-108
3: -108~-107
4: -107~-106
5: -106~-105
6: -105~-104
7: -104~-103
8: -103~-102
9: -102~-101
10: -101~-100
11: -100~-99
12: -99~-98
13: -98~-97
14: -97~-96
15: -96~-95
16: -95~-94
17: -94~-93
18: -93~-92
19: -92~-91
20: -91~-90
21: -90~-89
22: -89~-88
23: -88~-87
24: -87~-86
25: -86~-85
26: -85~-84
27: -84~-83
28: -83~-82
29: -82~-81
30: -81~-80
31: -80~-79
32: -79~-78
33: -78~-77
2-2465
SJ-20140527134815-013|2015-03-10(R1.1)
34: -77~-76
35: -76~-75
36: -75~-74
37: -74~-73
38: -73~-72
39: -72~-71
40: -71~-70
41: -70~-69
42: -69~-68
43: -68~-67
44: -67~-66
45: -66~-65
46: -65~-64
47: -64~-63
48: -63~-62
49: -62~-61
50: -61~-60
51: -60~-59
52: -59~-58
53: -58~-57
54: -57~-56
55: -56~-55
56: -55~-54
57: -54~-53
58: -53~-52
59: -52~-51
60: -51~-50
61: -50~-49
62: -49~-48
63: >-48
Unit
dBm
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2466
SJ-20140527134815-013|2015-03-10(R1.1)
The parameter value must be greater than the cell-level minimum
access level in the corresponding neighbor cell, and greater than

or equal to the threshold for downlink level based handovers in the
corresponding neighbor cell. Or else, frequent handovers or cell
reselections may occur.
During network optimization, the parameter value can be properly
increased to prevent frequent handovers, or properly decreased to
fasten handovers of fast moving MSs. On a dual-frequency network,
this parameter can be properly increased for 1800M neighbor cells
to prevent handovers from a 900M cell to an 1800M cell due to
weak signal.
An inappropriately set parameter may cause ping-pong handovers,
frequent handovers, and call drops.
Reason
radio conditions.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.7 MIN threshold of signal level for handover on PBGT

Full Name
MIN threshold of signal level for handover on PBGT
Abbreviated Name
HoMarginPbgt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2467
SJ-20140527134815-013|2015-03-10(R1.1)
Description

made after the required average values are acquired. The PBGT
value of a neighbor cell is also a reason that can trigger a handover.
A decision to do a handover is made when the PBGT value of a
neighbor cell is greater than or equal to the corresponding threshold
of the neighbor cell. The handover reason is that a more appropriate
cell is detected.
This parameter is the threshold that must be used for the decision of
a handover caused by PBGT from a neighbor cell to the local cell.
Instance
Cell
Related FG
0..100
Unit
dB
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A larger value indicates that it is hard for an MS to be handed over
to a target cell, while a smaller value indicates an easy handover.

For a value less than 24, a handover can be triggered even the level
of the target cell is lower than that of the source cell.
This parameter should be appropriately increased where there are
frequent handovers.
This parameter should be appropriately decreased where there are
obstacles or shadows to speed up handovers to avoid poor quality
or call drops.
In case of traffic sharing for dual-frequency or single-frequency
networking, this parameter can be asymmetrically set. For example,
the threshold for the handover from cell A with high traffic to cell B
with low traffic is set to a small value, while the threshold for the
handover from cell B with low traffic to cell A with high traffic is set to
a large value, which helps balance the traffic between the two cells
and relieve traffic congestion in cell A. The relation between this
parameter and the CRO value in idle mode should be considered
and the threshold value for the handover from cell B to cell A minus
24 should be greater than the C2 value for cell B minus that for cell A.
2-2468
SJ-20140527134815-013|2015-03-10(R1.1)
Otherwise, a handover from cell B to cell A is triggered immediately

after a call is initiated in cell B, and the traffic cannot be shared.
An inappropriately set parameter (too low or too high) may have an
adverse impact on handovers and drive testing coverage rate and
cause ping-pong handovers, frequent handovers, and call drops.
If this parameter is set to 24, the PBGT of a neighbor cell is equal
Reason
to that of the local cell. If this parameter is set to 30, the PBGT of
a neighbor cell is 6 dB higher than that of the local cell. 6 dB is a
typical value, which helps avoid frequent handovers and ping-pong
handovers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.8 MIN threshold of signal level for handover on power level

Full Name
MIN threshold of signal level for handover on power level
Abbreviated Name
HoMarginRxLev
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

made after the required average values are acquired. In a handover
due to Rx level, neighbor cells are selected and sorted. The Rx level
in these cells must be higher than or equal to the corresponding
threshold. This parameter is the threshold that must be used for the
decision of a PS handover due to signal strength from a neighbor
cell to the local cell.
Instance
Cell
2-2469
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..100
Unit
dB
Default Value
27
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Handover depending on Rx level is a kind of rescue handover. A
low threshold (lower than the PBGT threshold) is recommended to

ensure a timely handover based on Rx level.
If this parameter is set too low, ping-pong or frequent handovers
may occur. If this parameter is set too high, handovers may be
delayed, resulting in poor voice quality or even call drops.
If this parameter is set to 24, the signal strength of a neighbor cell is
Reason
equal to that of the local cell. If this parameter is set to 27, the signal
strength of a neighbor cell is 3 dB higher than that of the local cell.
For a level-triggered handover, the Rx level in the target cell should
be slightly higher than that in the local cell to prevent handovers
to a worse cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.9 MIN threshold of signal level for handover on quality

2-2470
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
MIN threshold of signal level for handover on quality
Abbreviated Name
HoMarginRxQual
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

be made after the required average values are acquired. In a
handover due to Rx quality, neighbor cells are selected and sorted.
The Rx quality in these cells must be higher than or equal to the
corresponding threshold. This parameter is the threshold that must
be used for the decision of a handover triggered by poor signal
quality from a neighbor cell to the local cell.
Instance
Cell
Related FG
0..100
Unit
dB
Default Value
26
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Handover depending on Rx quality is a kind of rescue handover. A
low threshold (lower than the Rx level threshold) is recommended to

ensure timely handovers based on Rx quality and make outgoing
handovers from a poor-quality cell more easily.
If this parameter is set too low, ping-pong or frequent handovers
may occur. If this parameter is set too high, handovers may be
delayed, resulting in poor voice quality or even call drops.

Reason
If this parameter is set to 24, the signal strength of a neighbor cell

is equal to that of the local cell. If this parameter is set to 26, the
signal strength of a neighbor cell is 2 dB higher than that of the local
cell. For a quality-triggered handover, the Rx level in the target
cell should be slightly higher than that in the local cell to prevent
handovers to a worse cell.
2-2471
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.10 Is related cell

Full Name
Is related cell
Abbreviated Name
IsRelatedCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Only cells related to the serving cell can be candidate target cells
for a rapid fading handover. This parameter indicates whether a
neighbor cell is related to the serving cell. It is a parameter of the
neighbor cell.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-2472
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter can be adjusted in accordance with the network
planning. For example, this parameter can be set to Yes for a

candidate cell for a fast fading handover.
The default value is set because most neighbor cells are not related
Reason
to the serving cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.11 Neighboring cell layer

Full Name
Neighboring cell layer
Abbreviated Name
NCellLayer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
With the introduction of multilayer network technology and

dual-frequency network technology, multilayer radio coverage can
be formed in the same physical area and various handover policies
are developed. This parameter specifies the layer of a neighbor cell.
Limiting the PBGT handovers defined in the specifications to the
same layer can reduce the number of handovers during a call and
improve the system reliability and communication quality. The policy
for handovers between a macro cell layer and a micro cell layer
mainly depends on the moving speed of an MS. The MS moving at
a higher speed may attempt to stay at the upper layer, while the MS
moving at a lower speed may attempt to enter the lower layer. The
2-2473
SJ-20140527134815-013|2015-03-10(R1.1)
undefined cell in the service area can be considered as a candidate

cell only in case of an emergency handover or when a handover to
an undefined layer is allowed for a PBGT handover.
Options:
Same layer of the home cell: The neighbor cell and serving cell are
in the same layer (PBGT handover possible).
Upper layer of the home cell: The neighbor cell is the upper layer
of the serving cell.
Lower layer of the home cell: The neighbor cell is in the lower layer
of the serving cell.
Instance
Cell
Related FG
0: Undefined
1: Same layer of the home cell
2: Upper layer of the home cell
3: Lower layer of the home cell
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The layer defined by this parameter is logical and irrelevant for
network coverage and frequency band. For example, a 900M cell

or an 1800M cell can both be defined as the same, upper, or lower
layer neighbor cell of a 900M cell.
Neighbor cell layers affect the priority of target cell filtering and
sorting (For details, refer to handover algorithm application
instructions). Layer-related handovers generally include PBGT
handover, macro-micro handover, and traffic handover. A
macro-micro handover can be triggered only when the neighbor
relation is configured and can be performed only from an upper
layer to a lower layer.
Neighbor cell layers can be flexibly set to share traffic to some
extent and improve the congestion rate.
The default value is set because the network is generally
Reason
single-layer.
2-2474
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.12 Is handover forced neighbor cell

Full Name
Is handover forced neighbor cell
Abbreviated Name
IsHoForceNcell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In case of co-site of an 1800M network and 900M network, the MSs

near the BTS can be directly handed over to the 1800M network
because the signals of the 1800M network are good enough
although they may be not so good as those in the 900M network. In
this case, the traffic is transferred forcibly.
A forced handover is the last resort for on-site traffic adjustment
during dual-frequency co-site networking. In this case, the handover
is performed definitely to the 1800M sector. To avoid influence on
other cells, the forced handover is performed only for a specific
target cell.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
2-2475
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
This parameter is recommended to be set for a target cell for forced
handovers.
This parameter is set to No by default. For a 900M/1800M co-site
Reason
cell, the 1800M cell can be set to the target cell for forced handovers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.13 MAX level difference of force handover

Full Name
MAX level difference of force handover
Abbreviated Name
MaxForceHoDiff
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A forced handover is applicable only for a specified cell. It should

be restricted by a tolerable level difference. The tolerable level
difference should be lower than the PBGT handover threshold in the
reverse direction to avoid ping-pong handovers.
Instance
Cell
Related FG

2-2476
SJ-20140527134815-013|2015-03-10(R1.1)
0..48
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A smaller value is more likely to trigger a handover. However, if
this parameter is set too small, ping-pong handovers may occur

frequently.
The default value is set based on the experience.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.14 Handover force resource threshold

Full Name
Handover force resource threshold
Abbreviated Name
HoForceResThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2477
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the threshold of the resources reserved

for a forced handover to a target cell. A forced handover should
not cause congestion in the target cell. When the resource value
of the target cell is lower than the congestion threshold, a forced
handover can be implemented.
The resource threshold is calculated as follows:
100 - current TCH load in the cell >= threshold of the resources
reserved for a forced handover
current TCH load in the cell = the number of busy TCHs (static and
dynamic) 100/(the number of busy TCHs (static and dynamic) +
the number of idle TCHs (static and dynamic).
Instance
Cell
Related FG
0..100
Unit
Default Value
40
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter should be configured based on the channel seizure
due to incoming and outgoing traffic handovers for a proper load

balance.
The default value is set based on the experience. If this parameter
Reason
is set too large, congestion may occur. If this parameter is set too
small, a waste of resources may occur.
Change take effect
No
Access
Read/Write
OMC Access path


2-2478
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.50.15 Macro to micro handover Threshold

Full Name
Macro to micro handover Threshold
Abbreviated Name
MacroMicroHoThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the signal strength threshold for a

macro-micro handover. When the signal strength of a neighbor
cell reaches the value specified by this parameter, it can be used
as the target cell.
Instance
Cell
Related FG
0: <-110
1: -110~-109
2: -109~-108
3: -108~-107
4: -107~-106
5: -106~-105
6: -105~-104
7: -104~-103
8: -103~-102
9: -102~-101
10: -101~-100
11: -100~-99
12: -99~-98
13: -98~-97
14: -97~-96
15: -96~-95
16: -95~-94
17: -94~-93
18: -93~-92
19: -92~-91
20: -91~-90
21: -90~-89
22: -89~-88
2-2479
SJ-20140527134815-013|2015-03-10(R1.1)
23: -88~-87
24: -87~-86
25: -86~-85
26: -85~-84
27: -84~-83
28: -83~-82
29: -82~-81
30: -81~-80
31: -80~-79
32: -79~-78
33: -78~-77
34: -77~-76
35: -76~-75
36: -75~-74
37: -74~-73
38: -73~-72
39: -72~-71
40: -71~-70
41: -70~-69
42: -69~-68
43: -68~-67
44: -67~-66
45: -66~-65
46: -65~-64
47: -64~-63
48: -63~-62
49: -62~-61
50: -61~-60
51: -60~-59
52: -59~-58
53: -58~-57
54: -57~-56
55: -56~-55
56: -55~-54
57: -54~-53
58: -53~-52
59: -52~-51
60: -51~-50
61: -50~-49
62: -49~-48
63: >-48
Unit
dBm
Default Value
20
2-2480
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A larger threshold tends to trigger a macro-to-micro handover.
The default value is set based on the field experience, which
Reason
ensures handover to a neighbor cell with a better level and results in

a proper number of handovers.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.16 Macro to micro handover Value N

Full Name
Macro to micro handover Value N
Abbreviated Name
MacroMicroHoN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2481
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When the level of a neighbor cell is greater than the value of

the MacroMicroHoThs parameter for consecutive N times, a
macro-to-micro handover is triggered to avoid mis-handover or
frequent handovers to the target cell due to signal fluctuation. This
parameter indicates this N value. In the process of a macro-to-micro
handover decision, if consecutive N measurement reports satisfy the
decision condition, the macro-to-micro handover condition is fulfilled.
Instance
Cell
Related FG
1..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A larger value may not work on traffic sharing and balance due to
delay in a macro-to-micro handover because the handover can be

triggered only when the signal is strong enough after a long time.
A smaller value may cause call drops and decrease the handover
success rate and signal coverage rate due to mis-handover or
frequent handovers because the signal can be strong enough to
trigger the handover in a short time.
This parameter is used for neighbor cells and can be flexibly set
based on different neighbor cell settings.
The default value is set based on the field experience.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2482
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.101/V6.30.101
N/A
2.50.17 Target cell traffic threshold

Full Name
Target cell traffic threshold
Abbreviated Name
TargetCellTrafficThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the traffic threshold in a target cell. This

threshold is used to determine whether a handover to the target cell
is allowed. If the traffic in the target cell is higher than the threshold,
no handover to the cell is allowed.
This parameter is used for handover to and reselection of a 2G
neighbor cell.
Instance
Cell
Related FG
0..100
Unit
Default Value
75
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the threshold is too high, congestion may occur in the target cell.
If the threshold is too low, a neighbor cell is unlike to be selected as

a target cell. This parameter can generally be set to a larger value if
there are many channels available in the target cell.
The default value is a typical threshold.
Reason
2-2483
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.18 CS adjacent cell report priority

Full Name
CS adjacent cell report priority
Abbreviated Name
RepPrioCS
Managed Object

3GPP Name
REP_PRIORITY
3GPP Reference
N/A
Description
This parameter indicates the report priority of a neighbor cell.

Neighbor cells are reported in accordance with the following priority
order:
Neighbor cells with the same frequency band as the serving cell.
These cells must meet the following requirements: The BSIC is
valid. The measured field strength ranks high among the cells
with the same frequency band and is greater than or equal to the
lower limit specified by RprtThoCSXXX (where, XXX indicates the
frequency band of the serving cell).
Neighbor cells with different frequency bands from the serving cell.
valid. The measured field strength ranks high among the cells with
the same frequency band and is greater than or equal to the lower
limit specified by RprtThoCSXXX (where, XXX indicates a frequency
band different from that of the serving cell).
Other RAT neighbor cells, such as UTRAN and FDD neighbor
cells. These cells must meet the following requirements: The
scrambling code is correct. The measured field strength ranks
high among the cells of the same radio access technology (such
2-2484
SJ-20140527134815-013|2015-03-10(R1.1)
as UTRAN/FDD) and is greater than or equal to the lower limit

specified by XXXRprtThoCS (where, XXX indicates a radio access
technology, for example, WCDMA/FDD).
If the number of neighbor cells on a priority class does not reach
the allowed number, the neighbor cells on the lower priority class
can be reported. Among neighbor cells supporting the same radio
access technology (such as UTRAN/FDD) or neighbor cells with the
same frequency band (such as GSM900M), the neighbor cells with
higher RepPrioCS have the higher report priority. Among neighbor
cells with the same RepPrioCS, the cells with the greater sum of
RprtThoCSXXX (or XXXRprtThoCS) and RprtOffsetCSXXX (or
XXXRprtOffsetCS) have the higher report priority.
Instance
Cell
Related FG

Handover
0: low
1: high
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
No modification is needed unless specially required.
The default value is set to "low" as specified by the protocol.
Reason
Change take effect
No
Access
Read/Write
2-2485
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.50.19 PS adjacent cell report priority

Full Name
PS adjacent cell report priority
Abbreviated Name
RepPrioPS
Managed Object

3GPP Name
REP_PRIORITY
3GPP Reference
N/A
Description
This parameter indicates the report priority of a neighbor cell. It is

broadcast to MSs through SI2quater.
order:
lower limit specified by RprtThoPSXXX (where, XXX indicates the
limit specified by RprtThoPSXXX (where, XXX indicates a frequency
specified by XXXRprtThoPS (where, XXX indicates a radio access
2-2486
SJ-20140527134815-013|2015-03-10(R1.1)

higher RepPrioPS have the higher report priority. Among neighbor
cells with the same RepPrioPS, the cells with the greater sum
of RprtThoPSXXX (or XXXRprtThoPS) and RprtOffsetPSXXX (or
XXXRprtOffsetPS) have the higher report priority.
Instance
Cell
Related FG
0: low
1: high
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Among neighbor cells on the lowest priority class, reporting a
neighbor cell with high priority is expected, meaning the parameter

RepPrioPS of this neighbor cell is set to "high". This neighbor cell
will be reported in each measurement report. Generally, all neighbor
cells are treated as equals. Neighbor cells with low priority are not
frequently reported (when ReportRatePS is 1). The default value is
recommended for the parameter RepPrioPS.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2487
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.50.20 The direction of neighbour cell for downlink rapid handover

Full Name
The direction of neighbour cell for downlink rapid handover
Abbreviated Name
NCellDir
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the direction of a neighbor cell to the local

cell. Every neighbor cell can be configured with a direction.
Instance
Cell
Related FG
0: no direction
1: Direction A
2: Direction B
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In a high-speed rail scenario, the direction of a neighbor cell is
specified based on network planning.
The default value is set for all except the high-speed rail scenario.
Reason
Change take effect
No
2-2488
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.50.21 Minimum RX level(PS)

Full Name
Minimum RX level(PS)
Abbreviated Name
RxLevMin_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum Rx level on the PBCCH in the

cell that allows an MS to be handed over to the local cell during PS
services. It is one of the parameters for determining the preferential
cell during PS handover control. The MS in the cell monitors the Rx
level on the PBCCH in each neighbor cell. A neighbor cell can be a
candidate target cell for handovers only when its Rx level is greater
than the minimum Rx level. A handover decision may be made
when the required minimum Rx level in a neighbor cell is greater
than the required minimum Rx level in the local cell. This indicates
that the MS is located on the cell boundary.
Instance
Cell
Related FG
0: <-110
1: -110~-109
2: -109~-108
3: -108~-107
4: -107~-106
5: -106~-105
6: -105~-104
7: -104~-103
8: -103~-102
9: -102~-101
10: -101~-100
2-2489
SJ-20140527134815-013|2015-03-10(R1.1)
11: -100~-99
12: -99~-98
13: -98~-97
14: -97~-96
15: -96~-95
16: -95~-94
17: -94~-93
18: -93~-92
19: -92~-91
20: -91~-90
21: -90~-89
22: -89~-88
23: -88~-87
24: -87~-86
25: -86~-85
26: -85~-84
27: -84~-83
28: -83~-82
29: -82~-81
30: -81~-80
31: -80~-79
32: -79~-78
33: -78~-77
34: -77~-76
35: -76~-75
36: -75~-74
37: -74~-73
38: -73~-72
39: -72~-71
40: -71~-70
41: -70~-69
42: -69~-68
43: -68~-67
44: -67~-66
45: -66~-65
46: -65~-64
47: -64~-63
48: -63~-62
49: -62~-61
50: -61~-60
51: -60~-59
52: -59~-58
53: -58~-57
54: -57~-56
2-2490
SJ-20140527134815-013|2015-03-10(R1.1)
55: -56~-55
56: -55~-54
57: -54~-53
58: -53~-52
59: -52~-51
60: -51~-50
61: -50~-49
62: -49~-48
63: >-48
Unit
dBm
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
This parameter is related to PBCCH and not recommended to be
used.
This parameter is related to the PBCCH. The default value is
Reason
recommended.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.22 Margin of PBGT handover(PS)

Full Name
Margin of PBGT handover(PS)

2-2491
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
HoMarginPbgt_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A PS handover decision can be made after the required average

values are acquired. The PBGT_PS value of a neighbor cell is
also a reason that can trigger a handover. A decision to perform a
handover is made when the PBGT_PS value of a neighbor cell is
greater than the corresponding threshold of the neighbor cell. The
handover reason is that a more appropriate cell is detected. This
parameter is the threshold that must be used for the decision of a
PS handover caused by PBGT from a neighbor cell to the local cell.
Instance
Cell
Related FG
0..48
Unit
dB
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value is set to ensure that the target cell has good signal
Reason
strength for a handover caused by PBGT.
Change take effect
No
Access
Read/Write
2-2492
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.50.23 Margin of RX handover(PS)

Full Name
Margin of RX handover(PS)
Abbreviated Name
HoMarginRxLev_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

values are acquired. In case of handovers triggered by level,
neighbor cells are selected and sorted. This parameter is the
threshold that must be used for the decision of a PS handover due
to signal strength from a neighbor cell to the local cell.
Instance
Cell
Related FG
0..48
Unit
dB
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value is set to ensure that the target cell has good signal
Reason
strength for a handover caused by signal strength.

2-2493
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.24 Margin of quality handover(PS)

Full Name
Margin of quality handover(PS)
Abbreviated Name
HoMarginRxQual_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

values are acquired. In case of handover triggered by poor signal
quality, neighbor cells are selected and sorted. This parameter is
the threshold that must be used for the decision of a PS handover
triggered by poor signal quality from a neighbor cell to the local cell.
Instance
Cell
Related FG
0..48
Unit
dB
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
2-2494
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
needed.
This default value is set to ensure that the target cell has good signal
Reason
strength for a handover triggered by poor signal quality.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.25 Is related cell(PS)

Full Name
Is related cell(PS)
Abbreviated Name
IsRelatedCell_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Only the cells relating to the serving cell can be candidate target
cells for a rapid fading PS handover. This parameter is a neighbor
cell's parameter that indicates whether a neighbor cell relates to
the serving cell.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
0
2-2495
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
This default value is related to the fast fading handover. It is not
Reason
set by default.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.26 Handover priority(PS)

Full Name
Handover priority(PS)
Abbreviated Name
HoPriority_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2496
SJ-20140527134815-013|2015-03-10(R1.1)
Description
In a PS handover procedure, cell priority must be considered

when candidate cells are sorted. The sequence of candidate cells
depends on three factors: priority, traffic, and radio conditions.
Priority and traffic are two major factors that influence the sorting of
candidate cells. If these two factors lead to the same cell sequence,
the candidate cells are sorted again in accordance with their radio
conditions. A larger parameter value indicates a higher cell priority.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
This default value indicates an intermediate priority.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2497
SJ-20140527134815-013|2015-03-10(R1.1)
2.50.27 Max TX power of MS(PS)

Full Name
Max TX power of MS(PS)
Abbreviated Name
MsTxPwrMax_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum allowable transmit power of

an MS in the neighbor cell when a PBCCH exists.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
use this parameter.
This parameter is related to the PBCCH. The default value is
Reason
recommended.
Change take effect
No
Access
Read/Write
OMC Access path

2-2498
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.50.28 Traffic threshold of target cell(PS)

Full Name
Traffic threshold of target cell(PS)
Abbreviated Name
TargetTrafficThs_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

threshold is used to determine whether a PS handover to the target
cell is allowed. If the traffic in the target cell is higher than the
threshold, no PS handover to the cell is allowed.
Instance
Cell
Related FG
0..100
Unit
Default Value
70
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
This default value is set to ensure that the target cell has sufficient
Reason
resources for handover.
Change take effect
No
2-2499
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.50.29 Threshold of macro to micro handover(PS)

Full Name
Threshold of macro to micro handover(PS)
Abbreviated Name
MacroMicroHoThs_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A macro-cell to micro-cell handover is commonly applied in a

two-layer network. The handover procedure hands over a slowly
moving MS from the macro-cell layer to the micro-cell layer. The PS
handover of a slowly moving MS from the local cell to a lower-layer
cell is determined depending on whether the trigger condition is met,
meaning whether the number of times that the level of the neighbor
cell exceeds the threshold reaches N. This parameter specifies the
signal strength threshold that is used for determining a macro-cell to
micro-cell PS handover.
Instance
Cell
Related FG
0: <-110
1: -110~-109
2: -109~-108
3: -108~-107
4: -107~-106
5: -106~-105
6: -105~-104
7: -104~-103
8: -103~-102
9: -102~-101
10: -101~-100
11: -100~-99
2-2500
SJ-20140527134815-013|2015-03-10(R1.1)
12: -99~-98
13: -98~-97
14: -97~-96
15: -96~-95
16: -95~-94
17: -94~-93
18: -93~-92
19: -92~-91
20: -91~-90
21: -90~-89
22: -89~-88
23: -88~-87
24: -87~-86
25: -86~-85
26: -85~-84
27: -84~-83
28: -83~-82
29: -82~-81
30: -81~-80
31: -80~-79
32: -79~-78
33: -78~-77
34: -77~-76
35: -76~-75
36: -75~-74
37: -74~-73
38: -73~-72
39: -72~-71
40: -71~-70
41: -70~-69
42: -69~-68
43: -68~-67
44: -67~-66
45: -66~-65
46: -65~-64
47: -64~-63
48: -63~-62
49: -62~-61
50: -61~-60
51: -60~-59
52: -59~-58
53: -58~-57
54: -57~-56
55: -56~-55
2-2501
SJ-20140527134815-013|2015-03-10(R1.1)
56: -55~-54
57: -54~-53
58: -53~-52
59: -52~-51
60: -51~-50
61: -50~-49
62: -49~-48
63: >-48
Unit
dBm
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default threshold is set to -90 dBm to ensure that a macro-cell
Reason
to micro-cell handover can be initiated for traffic balancing before

any other type of handover is triggered.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.30 Counter of macro to micro handover(PS)

Full Name
Counter of macro to micro handover(PS)

2-2502
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
MacroMicroHoN_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A macro-cell to micro-cell handover is commonly applied in a

two-layer network. The handover procedure hands over a slowly
moving MS from the macro-cell layer to the micro-cell layer. The PS
handover of a slowly moving MS from the local cell to a lower-layer
cell is determined depending on whether the trigger condition is met,
meaning whether the number of times that the level of the neighbor
cell exceeds the threshold reaches N. This parameter specifies the
number of times (N) that the level of the neighbor cell exceeds the
signal strength threshold for a macro-cell to micro-cell PS handover.
Instance
Cell
Related FG
1..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value is set to 2 to ensure rapid and correct macro-cell
Reason
to micro-cell handover.
Change take effect
No
Access
Read/Write
2-2503
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.50.31 The number of C/I limited cell

Full Name
The number of C/I limited cell
Abbreviated Name
CILimitedNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of neighbor cells that constrain

handovers from the serving cell to a neighbor cell. If the parameter
is set to 0, the handover from the serving cell to the neighbor cell is
not constrained by any other neighbor cell.
Instance
Cell
Related FG
0..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, C/I constraints from other neighbor cells are not
recommended on a neighbor cell. If a cell covers an intersection

area (for example, a T junction or crossroads) due to unstable
signal in the area, C/I constraints from other neighbor cells can be
configured to prevent handover to such a cell.
2-2504
SJ-20140527134815-013|2015-03-10(R1.1)
The handover algorithm considering the C/I constraints of other
Reason
neighbor cells is developed for special scenarios and seldom used.

The default value is set to 0, indicating that no C/I constraint from
another neighbor cell is enabled.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.32 The objectID list of C/I limited cell

Full Name
The objectID list of C/I limited cell
Abbreviated Name
LimitedObjectId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Object ID of a C/I constraint neighbor

cell in the neighbor cell list of the serving cell.
Instance
Cell
Related FG
0..255
Unit
N/A
Default Value
[0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[5]
2-2505
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
In accordance with the actual scenario, an object ID can be set for a
C/I constraint neighbor cell as the index of the cell in the neighbor
cell list of the serving cell.
The default value is the starting value 0. It can be modified as
Reason
required.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.33 The threshold list of C/I limited cell

Full Name
The threshold list of C/I limited cell
Abbreviated Name
CILimitedThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a list of C/I thresholds corresponding to the

C/I constraint cells of a neighbor cell of the serving cell. When a C/I
constraint cell and the serving cell of this neighbor cell have a C/I
value greater than the threshold corresponding to the C/I constraint
cell, handover to this neighbor cell is not allowed.
Instance
Cell
Related FG
0..63
2-2506
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
[63,63,63,63,63]
Related Parameters
N/A
N/A
Parameters
Value Type
long[5]
Parameter Type
Negotiation With CN
No
Function Switch
No
A higher threshold makes it more difficult to constrain the neighbor
cell and more likely to trigger handover to the neighbor cell. A low
threshold is recommended because the purpose of configuring
constraint neighbor cells for a neighbor cell is to prevent handover
to the neighbor cell.
This handover algorithm is developed for special scenarios. The
Reason
default value is set to the maximum value, meaning that the

constraint is ineffective. It can be adjusted to a smaller value in
accordance with the actual conditions.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.34 Downlink rapid handover threshold

Full Name
Downlink rapid handover threshold
Abbreviated Name
DLRapidHoThs
Managed Object

2-2507
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
One of the reasons for a handover is downlink rapid handover. The

decision to do a handover is made when each of the last consecutive
N downlink level (without being averaged) exceeds the sum of the
defined threshold and the offset (DLRapidHoOffset) acquired from
the speed. The handover reason is downlink rapid handover. The
parameter DLRapidHoThs defines the threshold.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
too small threshold may cause handover failures and call drops. The
threshold can be adjusted in accordance with the network coverage.
The default value -80 dBm is considered as the boundary between
Reason
good and bad level.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2508
SJ-20140527134815-013|2015-03-10(R1.1)
2.50.35 Downlink rapid handover N

Full Name
Downlink rapid handover N
Abbreviated Name
DLRapidHoN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
One of the reasons for a handover is downlink rapid handover. The

decision to do a handover is made when each of the last consecutive
N downlink level (without being averaged) exceeds the sum of the
defined threshold and the offset (DLRapidHoOffset) acquired from
the speed. The handover reason is downlink rapid handover. The
parameter DLRapidHoN defines the value of N.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

The default value is set to ensure rapid and correct handover
Reason
caused by downlink rapid handover.
Change take effect
No
2-2509
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.50.36 exclusive cell for high speed

Full Name
exclusive cell for high speed
Abbreviated Name
IsDLRapidHoNcell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a neighbor cell belongs to a

dedicated mobile communication network for high-speed railway. It
is a parameter of the neighbor cell. Only a cell in the dedicated
network can be selected as the target of a downlink rapid handover.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2510
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter can be adjusted in accordance with the network
planning. For example, this parameter can be set to "Yes" for a cell
configured in the high-speed railway scenario.
This parameter is a feature-related parameter. The default value
Reason
is set to "No".
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.50.37 CCN support

Full Name
CCN support
Abbreviated Name
CCNSUPPORT
Managed Object

3GPP Name
CCN_ACTIVE
3GPP Reference
N/A
Description

Options IE of SI13 on the BCCH to enable or disable the CCN mode
in the local cell when an MS makes a cell reselection to a GSM
neighbor cell. When the GPRS Cell Options IE does not contain the
determined, the parameter CCN_SUPPORTED in this neighbor cell
2-2511
SJ-20140527134815-013|2015-03-10(R1.1)

information. The MS is in NC0 and NC1 modes when using the
CCN mode.
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
NACCSupport
CCNActive
SIStatusInd
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If the CCN is enabled in the local cell and the neighbor cell, the MS
uses the CCN mode during cell reselection to the neighbor cell. If
the CCN is enabled in the local cell but disabled in the neighbor cell,
the MS does not use the CCN mode when making a cell reselection
to the neighbor cell. Generally, it is recommended to enable the
CCN mode in the local cell and enable the CCN support in the
neighbor cell.
By default, the CCN Active feature of the local cell and the CCN
Reason
Support feature of the neighbor cell are both enabled.
Change take effect
No
2-2512
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.50.38 Is the directed retry ncell

Full Name
Is the directed retry ncell
Abbreviated Name
DirectRetryCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a neighbor cell can be the target

cell in a directed retry. It is a parameter of the neighbor cell.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, a neighbor cell for handover can be the target cell of
directed retry unless specially required by the operator.
2-2513
SJ-20140527134815-013|2015-03-10(R1.1)
In most cases, all neighbor cells can be target cells of directed retry.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.50.39 PBGT handover margin of subcell2

Full Name
PBGT handover margin of subcell2
Abbreviated Name
HoMarginPbgtSC2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

made after the required average values are acquired. The PBGT
value of a neighbor cell is also a reason that can trigger a handover.
A decision to do a handover is made when the PBGT value of a
neighbor cell is greater than the corresponding threshold of the
neighbor cell. The handover reason is that a more appropriate cell
is detected.
This parameter indicates the threshold that must be used for making
a decision to do a PBGT handover from subcell 2 of the neighbor
cell to the local cell.
Instance
Cell
Related FG
0..100
Unit
Default Value
40
2-2514
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The threshold adjustment influences the probability that a PBGT
handover is triggered. The lower the threshold is, the more easily
a PBGT handover is triggered.
A too low threshold may cause ping-pong handover. A too high
threshold may cause failure of timely handover.
The minimum threshold for PGBT handover is set to 30 in
Reason
accordance with field experience, which ensures handover to a

neighbor cell with a better level and results in a proper number of
handover times.
The default value is set to 40 because the level in subcell 2 is
generally 10 dB lower than that in subcell 1.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.50.40 Rx level handover margin of subcell2

Full Name
Rx level handover margin of subcell2
Abbreviated Name
HoMarginRxLevSC2
Managed Object

3GPP Name
N/A
2-2515
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

due to Rx level, neighbor cells are selected and sorted in order.
The Rx level in these cells must be higher than or equal to the
corresponding threshold. This parameter indicates the threshold that
must be used for making a decision to do a handover from subcell 2
of the neighbor cell to the local cell in accordance with Rx level.
Instance
Cell
Related FG
0..100
Unit
Default Value
40
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Handover depending on Rx level is a kind of rescue handover. A
low threshold (lower than the PBGT threshold) is recommended to

ensure timely handover based on Rx level.
A too low threshold causes ping-pong or frequent handover. A
too high threshold causes a risk of poor quality or call drop due
to handover delay.
Generally, the Rx level in the target cell is generally higher than the
Reason
Rx level in the local cell to prevent handover to a worse cell. The

default Rx level threshold in subcell 1 is 30.
The default Rx level threshold in subcell 2 is set to 40 because the
Rx level in subcell 2 is generally 10 dB lower than that in subcell 1.
Change take effect
No
Access
Read/Write
2-2516
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.100/V6.30.100
N/A
2.50.41 Rx quality handover margin of subcell2

Full Name
Rx quality handover margin of subcell2
Abbreviated Name
HoMarginRxQualSC2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

due to Rx quality, neighbor cells are selected and sorted in order.
The Rx quality in these cells must be higher than or equal to the
corresponding threshold. This parameter indicates the threshold that
must be used for making a decision to do a handover from subcell 2
of the neighbor cell to the local cell in accordance with Rx quality.
Instance
Cell
Related FG
0..100
Unit
Default Value
40
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2517
SJ-20140527134815-013|2015-03-10(R1.1)
Handover depending on Rx quality is a kind of rescue handover. A
low threshold (lower than the Rx level threshold) is recommended

to ensure timely handover based on Rx quality and make outgoing
handover from a poor-quality cell more easily.
A too low threshold causes ping-pong or frequent handover. A
too high threshold causes a risk of poor quality or call drop due
to handover delay.
Generally, the Rx level in the target cell is generally higher than the
Reason
Rx level in the local cell to prevent handover to a worse cell. The

default Rx quality threshold in subcell 1 is 30.
The default Rx level threshold in subcell 2 is set to 40 because the
Rx level in subcell 2 is generally 10 dB lower than that in subcell 1.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.50.42 Min Rx level of Neighbour Cell for subcell2

Full Name
Min Rx level of Neighbour Cell for subcell2
Abbreviated Name
RxLevMinSC2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2518
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the minimum Rx level on the BCCH in the

cell that allows an MS in subcell 2 to be handed over to this cell. It
is one of the parameters for determining the preferential cell during
handover control. The MS in the cell monitors the Rx level on the
BCCH in each neighbor cell. A neighbor cell can be a candidate
target cell for handover only when its Rx level is greater than the
minimum Rx level. A decision to do a handover may be made when
the required minimum Rx level in a neighbor cell is greater than the
required minimum Rx level in the local cell. This indicates that the
MS is located on the cell boundary.
coverage of the cell. However, a too high minimum Rx level may
result in dead zones on the boundary between cells. Generally, an
Rx level no higher than -90 dB is recommended for traffic balancing.
On the initial operation stage of the network, this parameter can be
set to 10 (-101 dBm to -100 dBm) or a lower value, which is higher
than the receiver sensitivity (-102 dBm) of the MS. After the network
capacity is expanded or major coverage problems are resolved, this
parameter can be increased by 2.
Instance
Cell
Related FG
0: < -110dBm
1: -110 ~ -109 dBm
2: -109 ~ -108 dBm
3: -108 ~ -107 dBm
4: -107 ~ -106 dBm
5: -106 ~ -105 dBm
6: -105 ~ -104 dBm
7: -104 ~ -103 dBm
8: -103 ~ -102 dBm
9: -102 ~ -101 dBm
10: -101 ~ -100 dBm
11: -100 ~ -99 dBm
12: -99 ~ -98 dBm
13: -98 ~ -97 dBm
14: -97 ~ -96 dBm
15: -96 ~ -95 dBm
16: -95 ~ -94 dBm
17: -94 ~ -93 dBm
18: -93 ~ -92 dBm
19: -92 ~ -91 dBm
2-2519
SJ-20140527134815-013|2015-03-10(R1.1)
20: -91 ~ -90 dBm

21: -90 ~ -89 dBm
22: -89 ~ -88 dBm
23: -88 ~ -87 dBm
24: -87 ~ -86 dBm
25: -86 ~ -85 dBm
26: -85 ~ -84 dBm
27: -84 ~ -83 dBm
28: -83 ~ -82 dBm
29: -82 ~ -81 dBm
30: -81 ~ -80 dBm
31: -80 ~ -79 dBm
32: -79 ~ -78 dBm
33: -78 ~ -77 dBm
34: -77 ~ -76 dBm
35: -76 ~ -75 dBm
36: -75 ~ -74 dBm
37: -74 ~ -73 dBm
38: -73 ~ -72 dBm
39: -72 ~ -71 dBm
40: -71 ~ -70 dBm
41: -70 ~ -69 dBm
42: -69 ~ -68 dBm
43: -68 ~ -67 dBm
44: -67 ~ -66 dBm
45: -66 ~ -65 dBm
46: -65 ~ -64 dBm
47: -64 ~ -63 dBm
48: -63 ~ -62 dBm
49: -62 ~ -61 dBm
50: -61 ~ -60 dBm
51: -60 ~ -59 dBm
52: -59 ~ -58 dBm
53: -58 ~ -57 dBm
54: -57 ~ -56 dBm
55: -56 ~ -55 dBm
56: -55 ~ -54 dBm
57: -54 ~ -53 dBm
58: -53 ~ -52 dBm
59: -52 ~ -51 dBm
60: -51 ~ -50 dBm
61: -50 ~ -49 dBm
62: -49 ~ -48dBm
63: > -48 dBm
2-2520
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The parameter value must be greater than the cell-level minimum
access level in the corresponding neighbor cell, and greater than

or equal to the threshold for downlink level based handover in the
corresponding neighbor cell. Or else, frequent handover or cell
reselection may occur.
During network optimization, the parameter value can be properly
increased to prevent frequent handover, or properly decreased to
fasten handover of fast moving MSs. On a dual-frequency network,
this parameter can be properly increased for 1800M neighbor cells
to prevent handover from a 900M cell to a 1800M cell due to weak
signal.
An improperly set parameter may cause ping-pong handover,
frequent handover, and call drops.
The default value 15 indicates a general Rx level acceptable in
Reason
target cells for handover.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.50.43 Target cell traffic threshold of Subcell2

2-2521
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Target cell traffic threshold of Subcell2
Abbreviated Name
TargetTrafficThsSC2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the traffic threshold of the target cell when
the MS is located in subcell 2. This threshold is used to determine
whether a handover to the target cell is allowed. If the traffic in the
target cell is higher than the threshold, no handover to the cell is
allowed. This parameter is used for handover and reselection to
a 2G neighbor cell.
Instance
Cell
Related FG
0..100
Unit
Default Value
75
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the threshold is too high, congestion may occur in the target cell.
If the threshold is too low, handover may fail because no channel

is available in the neighbor cell.
The default value is set to ensure successful resource request
Reason
without causing congestion in the target cell.
Change take effect
No
Access
Read/Write
2-2522
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.100/V6.30.100
N/A
2.50.44 Handover Priority Indication when serve cell shuttingdown

Full Name
Handover Priority Indication when serve cell shuttingdown
Abbreviated Name
PwDownHoPriInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a neighbor cell takes over the

traffic of the serving cell when the serving cell is shut down.
Instance
Gsm Relation
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter can be set to 1 if a specific target cell is required for
handover.
This default value is set to allow the system to automatically select a
Reason
target cell for handover.
Change take effect
2-2523
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.45 Is The Related Cell In dual- Frequency Network

Full Name
Is The Related Cell In dual- Frequency Network
Abbreviated Name
IsDualFreqRltCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a neighbor cell is an associated

cell in an enhanced dual-frequency network.
Instance
Gsm Relation
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
IsDualFreqRltCell
1. Only one associated cell can be configured for a cell in case of
Parameters
dual-frequency network.
2. Two associated cells in the dual-frequency network must be
configured as neighbor cells of each other.
3. Two associated cells in the dual-frequency network must be
managed by the same CMP module.
Value Type
long
Parameter Type
2-2524
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
A neighbor cell is configured as an associated cell in the
dual-frequency network if this cell has a coverage overlapped with

the coverage of the current cell and load balancing is required
between these two cells.
Generally, a neighbor cell is not configured as an associated cell in
Reason
a dual-frequency network.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.46 Downlink rapid handover threshold for SDCCH

Full Name
Downlink rapid handover threshold for SDCCH
Abbreviated Name
SDDLRapidHoThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A downlink rapid SDCCH handover is triggered after necessary

One of the reasons for a handover is downlink rapid handover.
The handover reason is downlink rapid handover. The parameter
DLRapidHoThs defines the threshold.
Instance
Gsm Relation
2-2525
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

0: < -110dBm
1: -110 ~ -109 dBm
2: -109 ~ -108 dBm
3: -108 ~ -107 dBm
4: -107 ~ -106 dBm
5: -106 ~ -105 dBm
6: -105 ~ -104 dBm
7: -104 ~ -103 dBm
8: -103 ~ -102 dBm
9: -102 ~ -101 dBm
10: -101 ~ -100 dBm
11: -100 ~ -99 dBm
12: -99 ~ -98 dBm
13: -98 ~ -97 dBm
14: -97 ~ -96 dBm
15: -96 ~ -95 dBm
16: -95 ~ -94 dBm
17: -94 ~ -93 dBm
18: -93 ~ -92 dBm
19: -92 ~ -91 dBm
20: -91 ~ -90 dBm
21: -90 ~ -89 dBm
22: -89 ~ -88 dBm
23: -88 ~ -87 dBm
24: -87 ~ -86 dBm
25: -86 ~ -85 dBm
26: -85 ~ -84 dBm
27: -84 ~ -83 dBm
28: -83 ~ -82 dBm
29: -82 ~ -81 dBm
30: -81 ~ -80 dBm
31: -80 ~ -79 dBm
32: -79 ~ -78 dBm
33: -78 ~ -77 dBm
34: -77 ~ -76 dBm
35: -76 ~ -75 dBm
36: -75 ~ -74 dBm
37: -74 ~ -73 dBm
38: -73 ~ -72 dBm
39: -72 ~ -71 dBm
40: -71 ~ -70 dBm
41: -70 ~ -69 dBm
2-2526
SJ-20140527134815-013|2015-03-10(R1.1)
42: -69 ~ -68 dBm

43: -68 ~ -67 dBm
44: -67 ~ -66 dBm
45: -66 ~ -65 dBm
46: -65 ~ -64 dBm
47: -64 ~ -63 dBm
48: -63 ~ -62 dBm
49: -62 ~ -61 dBm
50: -61 ~ -60 dBm
51: -60 ~ -59 dBm
52: -59 ~ -58 dBm
53: -58 ~ -57 dBm
54: -57 ~ -56 dBm
55: -56 ~ -55 dBm
56: -55 ~ -54 dBm
57: -54 ~ -53 dBm
58: -53 ~ -52 dBm
59: -52 ~ -51 dBm
60: -51 ~ -50 dBm
61: -50 ~ -49 dBm
62: -49 ~ -48dBm
63: > -48 dBm
Unit
N/A
Default Value
10
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A handover is triggered when the neighbor cell's level reaches the
threshold in the case of fast moving.
As a rule of thumb, the handover is performed in time if the
Reason
parameter value is set to 10, which is taken by default therefore.
Change take effect
No
2-2527
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.47 Downlink rapid handover N for SDCCH

Full Name
Downlink rapid handover N for SDCCH
Abbreviated Name
SDDLRapidHoN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A downlink rapid SDCCH handover is triggered after necessary

One of the reasons for a handover is downlink rapid handover.
The handover reason is downlink rapid handover. The parameter
DLRapidHoN defines the value of N.
Instance
Related FG
Gsm Relation
1..20
Unit
N/A
Default Value
Related Parameters
ShoEnable
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2528
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
This handover type features fast moving. The N value should be
as small as possible to shorten the time for making a handover

judgment.
The handover is performed with sufficient promptness if the downlink
Reason
fast handover N is set to 2 (instead of a greater value).
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.48 Forbid Period For non-Emergency Handover

Full Name
Forbid Period For non-Emergency Handover
Abbreviated Name
ForbidNonEmergHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In the case of non-emergency handover, the forbidding period of

handover to the neighbor cell is counted from the time when the
system measures the cell for the first time. The unit is periods of
generating a measurement report.
(For preprocessing measurement reports, the unit is converted into
the period of generating an ordinary measurement report according
to the preprocessing period.) In the forbidding period, the neighbor
cell is not selected for non-emergency handover.
When failing to measure the neighbor cell and therefore the system
does not record it in the neighbor cell list, the system validates the
forbidding period again after the neighbor cell again is measured
once again.
2-2529
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Neighbor Cell
Related FG
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This function is usually applied for the high-speed rail case.
When the public network cell is configured as a neighbor cell in a

high-speed rail private cell, the parameter is configured (just in case
the speed measurement is not sufficiently accurate) to prevent the
private network users from handing over into the public network.
That is, to prevent users from handing over into this neighbor cell by
way of non-emergency handover during a time estimated in light of
the time when the high-speed rail runs through the neighbor cell. It
may also apply to other scenarios. Pay attention to the handover
success rate and call drop.
The default value is 0 (off).
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2530
SJ-20140527134815-013|2015-03-10(R1.1)
2.50.49 Penalty Period For non-Emergency Handover

Full Name
Penalty Period For non-Emergency Handover
Abbreviated Name
PenaltyNonEmergHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In the case of non-emergency handover, the penalty period of

to the preprocessing period.) In the penalty period, the neighbor cell
is not selected for non-emergency handover. When sorting neighbor
cells, the system takes the penalty level "PenaltyLevNonEmergHo"
into consideration. For the penalty level, a negative number refers
to penalty and a positive number refers to award.
does not record it in the neighbor cell list, the system validates
the penalty period again after the neighbor cell again is measured
once again.
Instance
Neighbor Cell
Related FG
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2531
SJ-20140527134815-013|2015-03-10(R1.1)

That is, to lower the possibility of users handing over into this
neighbor cell by way of non-emergency handover during a time
estimated in light of the time when the high-speed rail runs through
the neighbor cell. It may also apply to other scenarios. Also pay
attention to the handover success rate and call drop.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.50 Penalty Level For non-Emergency Handover

Full Name
Penalty Level For non-Emergency Handover
Abbreviated Name
PenaltyLevNonEmergHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In the case of non-emergency handover, this parameter indicates

the penalty level during a penalty period. For the penalty level, a
negative number refers to penalty and a positive number refers to
award. For details, refer to PenaltyLevNonEmergHo.
Instance
Neighbor Cell
2-2532
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0: -48dB
1: -47dB
2: -46dB
3: -45dB
4: -44dB
5: -43dB
6: -42dB
7: -41dB
8: -40dB
9: -39dB
10: -38dB
11: -37dB
12: -36dB
13: -35dB
14: -34dB
15: -33dB
16: -32dB
17: -31dB
18: -30dB
19: -29dB
20: -28dB
21: -27dB
22: -26dB
23: -25dB
24: -24dB
25: -23dB
26: -22dB
27: -21dB
28: -20dB
29: -19dB
30: -18dB
31: -17dB
32: -16dB
33: -15dB
34: -14dB
35: -13dB
36: -12dB
37: -11dB
38: -10dB
39: -9dB
40: -8dB
41: -7dB
42: -6dB
2-2533
SJ-20140527134815-013|2015-03-10(R1.1)
43: -5dB
44: -4dB
45: -3dB
46: -2dB
47: -1dB
48: 0dB
49: +1dB
50: +2dB
51: +3dB
52: +4dB
53: +5dB
54: +6dB
55: +7dB
56: +8dB
57: +9dB
58: +10dB
59: +11dB
60: +12dB
61: +13dB
62: +14dB
63: +15dB
64: +16dB
65: +17dB
66: +18dB
67: +19dB
68: +20dB
69: +21dB
70: +22dB
71: +23dB
72: +24dB
73: +25dB
74: +26dB
75: +27dB
76: +28dB
77: +29dB
78: +30dB
79: +31dB
80: +32dB
81: +33dB
82: +34dB
83: +35dB
84: +36dB
85: +37dB
86: +38dB
2-2534
SJ-20140527134815-013|2015-03-10(R1.1)
87: +39dB
88: +40dB
89: +41dB
90: +42dB
91: +43dB
92: +44dB
93: +45dB
94: +46dB
95: +47dB
96: +48dB
Unit
N/A
Default Value
48
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A negative value is usually configured to punish the neighbor cell,
that is, to make it impossible for users to hand over into this cell.
Also the call drop rate is taken care of.
The default value is 48 (0 dB). The specific penalty level is to be
Reason
determined by the user.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2535
SJ-20140527134815-013|2015-03-10(R1.1)
2.50.51 Forbid Period For Emergency Handover

Full Name
Forbid Period For Emergency Handover
Abbreviated Name
ForbidEmergHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In the case of emergency handover, the forbidding period of

to the preprocessing period.) In the forbidding period, the neighbor
cell is not selected for emergency handover.
If the system fails to measure the neighbor cell and therefore
does notrecord it in the neighbor cell list, the system validates the
forbidding period again after the neighbor cell again is measured
once again.
Instance
Neighbor Cell
Related FG
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2536
SJ-20140527134815-013|2015-03-10(R1.1)

That is, to prevent users from handing over into this neighbor cell
by way of emergency handover during a time estimated in light of
the time when the high-speed rail runs through the neighbor cell. It
may also apply to other scenarios. Pay attention to the handover
success rate and call drop.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.52 Penalty Period For Emergency Handover

Full Name
Penalty Period For Emergency Handover
Abbreviated Name
PenaltyEmergHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2537
SJ-20140527134815-013|2015-03-10(R1.1)
Description
In the case of emergency handover, the penalty period of handover

to the neighbor cell is counted from the time when the system
measures the cell for the first time. The unit is periods of generating
a measurement report.
to the preprocessing period.) In the penalty period, the neighbor cell
is not selected for emergency handover. When sorting neighbor
cells, the system takes the penalty level "PenaltyLevNonEmergHo"
into consideration. For the penalty level, a negative number refers
to penalty and a positive number refers to award.
does not record it in the neighbor cell list, the system validates
the penalty period again after the neighbor cell again is measured
once again.
Instance
Neighbor Cell
Related FG
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
When the public network cell is configured as a neighbor cell in

a high-speed rail private cell, the parameter is configured (just
in case the speed measurement is not sufficiently accurate) to
prevent the private network users from handing over into the public
network. That is, to lower the possibility of users handing over into
this neighbor cell by way of emergency handover during a time
estimated in light of the time when the high-speed rail runs through
the neighbor cell. It may also apply to other scenarios. Also pay
attention to the handover success rate and call drop.
Reason
Change take effect
2-2538
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.53 Penalty Level For Emergency Handover

Full Name
Penalty Level For Emergency Handover
Abbreviated Name
PenaltyLevEmergHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In the case of emergency handover, this parameter indicates the

penalty level during a penalty period. For the penalty level, a
negative number refers to penalty and a positive number refers to
award. For details, refer to PenaltyEmergHo.
Instance
Neighbor Cell
Related FG
0: -48dB
1: -47dB
2: -46dB
3: -45dB
4: -44dB
5: -43dB
6: -42dB
7: -41dB
8: -40dB
9: -39dB
10: -38dB
11: -37dB
12: -36dB
2-2539
SJ-20140527134815-013|2015-03-10(R1.1)
13: -35dB
14: -34dB
15: -33dB
16: -32dB
17: -31dB
18: -30dB
19: -29dB
20: -28dB
21: -27dB
22: -26dB
23: -25dB
24: -24dB
25: -23dB
26: -22dB
27: -21dB
28: -20dB
29: -19dB
30: -18dB
31: -17dB
32: -16dB
33: -15dB
34: -14dB
35: -13dB
36: -12dB
37: -11dB
38: -10dB
39: -9dB
40: -8dB
41: -7dB
42: -6dB
43: -5dB
44: -4dB
45: -3dB
46: -2dB
47: -1dB
48: 0dB
49: +1dB
50: +2dB
51: +3dB
52: +4dB
53: +5dB
54: +6dB
55: +7dB
56: +8dB
2-2540
SJ-20140527134815-013|2015-03-10(R1.1)
57: +9dB
58: +10dB
59: +11dB
60: +12dB
61: +13dB
62: +14dB
63: +15dB
64: +16dB
65: +17dB
66: +18dB
67: +19dB
68: +20dB
69: +21dB
70: +22dB
71: +23dB
72: +24dB
73: +25dB
74: +26dB
75: +27dB
76: +28dB
77: +29dB
78: +30dB
79: +31dB
80: +32dB
81: +33dB
82: +34dB
83: +35dB
84: +36dB
85: +37dB
86: +38dB
87: +39dB
88: +40dB
89: +41dB
90: +42dB
91: +43dB
92: +44dB
93: +45dB
94: +46dB
95: +47dB
96: +48dB
Unit
N/A
Default Value
48
Related Parameters
N/A
2-2541
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A negative value is usually configured to punish the neighbor cell,
that is, to make it impossible for users to hand over into this cell.
Also the call drop rate is taken care of.
The default value is 48 (0 dB). The specific penalty level is to be
Reason
determined by the user.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.54 avoid Ping-Pang cell reselection Timer

Full Name
avoid Ping-Pang cell reselection Timer
Abbreviated Name
TPingPang
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer to avoid NC2 ping-pang cell

reselection.
Instance
Cell
Related FG
2-2542
SJ-20140527134815-013|2015-03-10(R1.1)
0..31
Unit
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Not available.
This parameter indicates the timer to avoid NC2 ping-pang cell
Reason
reselection.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.55 NC2 Reselection hysteresis Threshold

Full Name
NC2 Reselection hysteresis Threshold
Abbreviated Name
NC2ResHys
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2543
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the hysteresis level for when the downlink
level of the target cell (that can be switched to this cell through
reselection) is higher than that of the serving cell.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Not available.
This parameter indicates the hysteresis level for when the downlink
Reason
level of the target cell (that can be switched to this cell through
reselection) is higher than that of the serving cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.56 NC2 reselection DL RxLevel Threshold

Full Name
NC2 reselection DL RxLevel Threshold
Abbreviated Name
NC2ResThr
2-2544
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink level threshold of the target

cell that can be switched to a better cell through reselection.
The threshold is higher than the level threshold that triggers cell
reselection.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is small, it is easy to initiate the PBGT reselection so
that better neighbor cell can be selected for the MS, thus the better
service experience. But there will be more reselections.

Reason
This parameter indicates the downlink level threshold of the target

cell that can be switched to a better cell through reselection.
The threshold is higher than the level threshold that triggers cell
reselection.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-2545
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.50.57 NC2 PBGT margin

Full Name
NC2 PBGT margin
Abbreviated Name
NC2MarginPBGT
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum PBGT threshold of MSs

selected to the neighbor cell according to PBGT criteria.
Instance
Cell
Related FG
0..48
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is big, the PBGT value of the target cell is high, thus
the good service experience. But it would be not that easy to find
the qualified cell.
Reason
Change take effect
No
Access
Read/Write
2-2546
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.58 NC2 RxLev margin

Full Name
NC2 RxLev margin
Abbreviated Name
NC2MarginRxLev
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum level threshold of MSs

selected to the neighbor cell according to level criteria. Condition
for becoming a target cell: AvRxLevDLNcell (n)>avRxLevDL
+ NC2MarginRxLev. AvRxLevDLNcell (n) means the average
neighbor cell downlink level strength. avRxLevDL means the
average serving cell downlink level strength.
Instance
Cell
Related FG
0..48
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is big, the level of the target cell is high, thus the good
service experience. But it would be not that easy to find the qualified
cell.
2-2547
SJ-20140527134815-013|2015-03-10(R1.1)
To be set as the different value that ensures the target cell to be
Reason
better than the source cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.59 NC2 RxQual margin

Full Name
NC2 RxQual margin
Abbreviated Name
NC2MarginRxQual
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum quality threshold of MSs

selected to the neighbor cell according to quality criteria. Condition
for becoming a target cell: AvRxLevDLNcell (n)>avRxLevDL +
NC2MarginRxQual. AvRxLevDLNcell (n) means the average
neighbor cell downlink level strength. avRxLevDL means the
average serving cell downlink level strength.
Instance
Cell
Related FG
0..48
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
2-2548
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is big, the quality of the target cell is good, thus the
good service experience. But it would be not that easy to find the
qualified cell.
To be set as the different value that ensures the target cell to be
Reason
better than the source cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.60 NC2 neighbour cell RXLEV_ACCESS_MIN

Full Name
NC2 neighbour cell RXLEV_ACCESS_MIN
Abbreviated Name
NC2RxLevMin
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum Rx level of MSs selected

Instance
Cell
Related FG
2-2549
SJ-20140527134815-013|2015-03-10(R1.1)
0: < -110dBm
1: -110 ~ -109 dBm
2: -109 ~ -108 dBm
3: -108 ~ -107 dBm
4: -107 ~ -106 dBm
5: -106 ~ -105 dBm
6: -105 ~ -104 dBm
7: -104 ~ -103 dBm
8: -103 ~ -102 dBm
9: -102 ~ -101 dBm
10: -101 ~ -100 dBm
11: -100 ~ -99 dBm
12: -99 ~ -98 dBm
13: -98 ~ -97 dBm
14: -97 ~ -96 dBm
15: -96 ~ -95 dBm
16: -95 ~ -94 dBm
17: -94 ~ -93 dBm
18: -93 ~ -92 dBm
19: -92 ~ -91 dBm
20: -91 ~ -90 dBm
21: -90 ~ -89 dBm
22: -89 ~ -88 dBm
23: -88 ~ -87 dBm
24: -87 ~ -86 dBm
25: -86 ~ -85 dBm
26: -85 ~ -84 dBm
27: -84 ~ -83 dBm
28: -83 ~ -82 dBm
29: -82 ~ -81 dBm
30: -81 ~ -80 dBm
31: -80 ~ -79 dBm
32: -79 ~ -78 dBm
33: -78 ~ -77 dBm
34: -77 ~ -76 dBm
35: -76 ~ -75 dBm
36: -75 ~ -74 dBm
37: -74 ~ -73 dBm
38: -73 ~ -72 dBm
39: -72 ~ -71 dBm
40: -71 ~ -70 dBm
41: -70 ~ -69 dBm
42: -69 ~ -68 dBm
43: -68 ~ -67 dBm
2-2550
SJ-20140527134815-013|2015-03-10(R1.1)
44: -67 ~ -66 dBm

45: -66 ~ -65 dBm
46: -65 ~ -64 dBm
47: -64 ~ -63 dBm
48: -63 ~ -62 dBm
49: -62 ~ -61 dBm
50: -61 ~ -60 dBm
51: -60 ~ -59 dBm
52: -59 ~ -58 dBm
53: -58 ~ -57 dBm
54: -57 ~ -56 dBm
55: -56 ~ -55 dBm
56: -55 ~ -54 dBm
57: -54 ~ -53 dBm
58: -53 ~ -52 dBm
59: -52 ~ -51 dBm
60: -51 ~ -50 dBm
61: -50 ~ -49 dBm
62: -49 ~ -48dBm
63: > -48 dBm
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Not available.
Reason
Change take effect
No
Access
Read/Write
2-2551
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.61 NC2 neighbour cell MS_TXPWR_MAX

Full Name
NC2 neighbour cell MS_TXPWR_MAX
Abbreviated Name
NC2MsTxPwrMax
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum Tx power of MSs in the

neighbor cell.
Instance
Cell
Related FG
0..31
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Not available.
Reason
Change take effect
No
2-2552
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.62 target cell traffic threshold

Full Name
target cell traffic threshold
Abbreviated Name
TargetCellTrafficThr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum traffic load threshold of MSs

reselected to the target cell. The candidate cell will be screened out
if its load is higher than this parameter.
Instance
Cell
Related FG
0..100
Unit
Default Value
70
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is small, low load of the target cell is required. Use a
smaller value if a cell with fewer loads is needed.
2-2553
SJ-20140527134815-013|2015-03-10(R1.1)
The load of a target cell should not be too high.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.63 Cell reselection priority

Full Name
Cell reselection priority
Abbreviated Name
CellChangePriority
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the priority of the neighbor cell reselected.

The higher the value, the higher the priority.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2554
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
The value can be raised if the cell should be reselected.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.64 Good level and bad quality handover NCell MARGIN

Full Name
Good level and bad quality handover NCell MARGIN
Abbreviated Name
GoodLevBadRQoffSet
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates, during good level and bad quality

handover, how much (in dB) the downlink level of a neighbor
cell drops from that of the serving cell. It describes the mapping
relationship with the downlink level of the serving cell. The downlink
level range is (>= -60, -60 to -70, -70 to -75, -75 to -85, < -85).
Instance
Neighbor Cell
Related FG
0..63
Unit
N/A
Default Value
[20,15,10,5,0]
Related Parameters
GoodLevBadRQHoEnable,GoodLevBadRQHoDLLev
2-2555
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
handover function.
Value Type
long[5]
Parameter Type
Negotiation With CN
No
Function Switch
No

It is the level offset worked out in light of the data of call drops
Reason
caused by bad voice quality.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.50.65 Is mutual adjacent cell

Full Name
Is mutual adjacent cell
Abbreviated Name
IsMutual
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a mutual neighbor cell.
Instance
RNC
Related FG
N/A
2-2556
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.51 Interfere Gsm Cell

Configuration(GGsmIntfRelation)
2.51.1 Interfere Gsm Cell Configuration ID
Full Name
Interfere Gsm Cell Configuration ID
Abbreviated Name
GGsmIntfRelationId
Managed Object
Interfere Gsm Cell Configuration(GGsmIntfRelation)
2-2557
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an interfere GSM cell configuration ID.
Instance
BSC
Related FG
N/A
1..6
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Adjacent Relation Configuration>Interfere Gsm Cell Configuration
N/A
2.51.2 GsmIntfRelation Sequence

Full Name
GsmIntfRelation Sequence
2-2558
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
GGsmIntfRelationSeq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a sequence number that uniquely identifies an

interference neighbor cell.
Instance
GsmRelation
Related FG

ZGO-04-03-008 Dynamic Frequency Allocation
1..48
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A unique sequence number must be configured for an interference
cell.
The sequence number varies with different interference cells. The
Reason
default value has no practical meaning.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2559
SJ-20140527134815-013|2015-03-10(R1.1)
2.51.3 GGsmCell DN
Full Name
GGsmCell DN
Abbreviated Name
refGGsmCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the referenced DN of the GSM source cell,

meaning the internal interference cell of the local cell.
Instance
GsmRelation
Related FG

N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
A cell having great impact on the local cell is configured as an
interference cell.
No default is available. The interference neighbor cell is configured
Reason
in accordance with the actual conditions.
Change take effect
No
Access
Read/Write
2-2560
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.51.4 GExternalGsmCell DN
Full Name
GExternalGsmCell DN
Abbreviated Name
refGExternalGsmCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the referenced DN of the external GSM

source cell, meaning the external interference cell of the local cell.
Instance
Related FG
GsmRelation
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
A cell having great impact on the local cell is configured as an
interference cell.
No default is available. The interference neighbor cell is configured
Reason
in accordance with the actual conditions.
Change take effect
2-2561
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.51.5 Exchange IFTA information with this interfere cell

Full Name
Exchange IFTA information with this interfere cell
Abbreviated Name
IFTATransfer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to perform IFTA information

interaction with the interference cell and calculate the interferences.
Instance
BSC
Related FG

Feature Guide
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2562
SJ-20140527134815-013|2015-03-10(R1.1)
If IFTA can be applied in the interference cell, this parameter is set
to 1. If IFTA cannot be applied in the interference cell, it is set to 0.
The interference cell is configured for enabling the IFTA function.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.51.6 Default Rx level of this interfere cell

Full Name
Default Rx level of this interfere cell
Abbreviated Name
DwLinkStrength1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the default value of the downlink signal

level of the interference cell measured by this cell. It can be used
when no historical measurement data is obtained.
Instance
BSC
Related FG

Feature Guide
2-2563
SJ-20140527134815-013|2015-03-10(R1.1)
0..63
0: < -110dBm
1: -110~-109 dBm
2: -109~-108dBm
3: -108~-107dBm
4: -107~-106dBm
5: -106~-105dBm
6: -105~-104dBm
7: -104~-103dBm
8: -103~-102dBm
9: -102~-101dBm
10: -101~-100dBm
11: -100~-99dBm
12: -99~-98dBm
13: -98~-97dBm
14: -97~-96dBm
15: -96~-95dBm
16: -95~-94dBm
17: -94~-93dBm
18: -93~-92dBm
19: -92~-91dBm
20: -91~-90dBm
21: -90~-89dBm
22: -89~-88dBm
23: -88~-87dBm
24: -87~-86dBm
25: -86~-85dBm
26: -85~-84dBm
27: -84~-83dBm
28: -83~-82dBm
29: -82~-81dBm
30: -81~-80dBm
31: -80~-79dBm
32: -79~-78dBm
33: -78~-77dBm
34: -77~-76dBm
35: -76~-75dBm
36: -75~-74dBm
37: -74~-73dBm
38: -73~-72dBm
39: -72~-71dBm
40: -71~-70dBm
41: -70~-69dBm
42: -69~-68dBm
2-2564
SJ-20140527134815-013|2015-03-10(R1.1)
43: -68~-67dBm
44: -67~-66dBm
45: -66~-65dBm
46: -65~-64dBm
47: -64~-63dBm
48: -63~-62dBm
49: -62~-61dBm
50: -61~-60dBm
51: -60~-59dBm
52: -59~-58dBm
53: -58~-57dBm
54: -57~-56dBm
55: -56~-55dBm
56: -55~-54dBm
57: -54~-53dBm
58: -53~-52dBm
59: -52~-51dBm
60: -51~-50dBm
61: -50~-49dBm
62: -49~-48dBm
63: > -48dBm
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used to measure the distance between this cell
and the interference cell, and antenna directions. It is configured

by estimating the downlink signal level of the interference cell
measured by the MS of this cell.
The default value is a typical estimated value of the signal level
Reason
in the neighbor cell.
Change take effect
No
0
2-2565
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.51.7 Default Rx level from this interfere cell

Full Name
Default Rx level from this interfere cell
Abbreviated Name
DwLinkStrength2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the default value of downlink signal level

of this cell measured by the interference cell. It can be used when
no historical measurement data is obtained.
Instance
BSC
Related FG

Feature Guide
0..63
0: < -110dBm
1: -110~-109 dBm
2: -109~-108dBm
3: -108~-107dBm
4: -107~-106dBm
5: -106~-105dBm
6: -105~-104dBm
7: -104~-103dBm
8: -103~-102dBm
9: -102~-101dBm
10: -101~-100dBm
11: -100~-99dBm
12: -99~-98dBm
13: -98~-97dBm
14: -97~-96dBm
15: -96~-95dBm
2-2566
SJ-20140527134815-013|2015-03-10(R1.1)
16: -95~-94dBm
17: -94~-93dBm
18: -93~-92dBm
19: -92~-91dBm
20: -91~-90dBm
21: -90~-89dBm
22: -89~-88dBm
23: -88~-87dBm
24: -87~-86dBm
25: -86~-85dBm
26: -85~-84dBm
27: -84~-83dBm
28: -83~-82dBm
29: -82~-81dBm
30: -81~-80dBm
31: -80~-79dBm
32: -79~-78dBm
33: -78~-77dBm
34: -77~-76dBm
35: -76~-75dBm
36: -75~-74dBm
37: -74~-73dBm
38: -73~-72dBm
39: -72~-71dBm
40: -71~-70dBm
41: -70~-69dBm
42: -69~-68dBm
43: -68~-67dBm
44: -67~-66dBm
45: -66~-65dBm
46: -65~-64dBm
47: -64~-63dBm
48: -63~-62dBm
49: -62~-61dBm
50: -61~-60dBm
51: -60~-59dBm
52: -59~-58dBm
53: -58~-57dBm
54: -57~-56dBm
55: -56~-55dBm
56: -55~-54dBm
57: -54~-53dBm
58: -53~-52dBm
59: -52~-51dBm
2-2567
SJ-20140527134815-013|2015-03-10(R1.1)
60: -51~-50dBm
61: -50~-49dBm
62: -49~-48dBm
63: > -48dBm
Unit
N/A
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used to measure the distance between the
interference cell and this cell, and antenna directions. It is configured

by estimating the downlink signal level of this cell measured by the
MS of the interference cell.
The default value is a typical estimated value of the signal level
Reason
in the neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.51.8 Low Level of Neighbour Cell

Full Name
Low Level of Neighbour Cell
Abbreviated Name
NcellLowLevel
Managed Object
2-2568
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
If an interference message does not report any measurement value,

a low level is filled in the message for calculating the historical
interference. This parameter indicates the value of this level.
Instance
Related FG
BSC
Feature Guide
0..63
0: < -110dBm
1: -110~-109 dBm
2: -109~-108dBm
3: -108~-107dBm
4: -107~-106dBm
5: -106~-105dBm
6: -105~-104dBm
7: -104~-103dBm
8: -103~-102dBm
9: -102~-101dBm
10: -101~-100dBm
11: -100~-99dBm
12: -99~-98dBm
13: -98~-97dBm
14: -97~-96dBm
15: -96~-95dBm
16: -95~-94dBm
17: -94~-93dBm
18: -93~-92dBm
19: -92~-91dBm
20: -91~-90dBm
21: -90~-89dBm
22: -89~-88dBm
23: -88~-87dBm
24: -87~-86dBm
25: -86~-85dBm
26: -85~-84dBm
27: -84~-83dBm
28: -83~-82dBm
29: -82~-81dBm
30: -81~-80dBm
31: -80~-79dBm
32: -79~-78dBm
2-2569
SJ-20140527134815-013|2015-03-10(R1.1)
33: -78~-77dBm
34: -77~-76dBm
35: -76~-75dBm
36: -75~-74dBm
37: -74~-73dBm
38: -73~-72dBm
39: -72~-71dBm
40: -71~-70dBm
41: -70~-69dBm
42: -69~-68dBm
43: -68~-67dBm
44: -67~-66dBm
45: -66~-65dBm
46: -65~-64dBm
47: -64~-63dBm
48: -63~-62dBm
49: -62~-61dBm
50: -61~-60dBm
51: -60~-59dBm
52: -59~-58dBm
53: -58~-57dBm
54: -57~-56dBm
55: -56~-55dBm
56: -55~-54dBm
57: -54~-53dBm
58: -53~-52dBm
59: -52~-51dBm
60: -51~-50dBm
61: -50~-49dBm
62: -49~-48dBm
63: > -48dBm
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2570
SJ-20140527134815-013|2015-03-10(R1.1)
If this parameter is too high, the neighbor cell interference evaluation
will be higher, which makes channel quality better but easier to be

congested. If this parameter is too low, the neighbor cell interference
evaluation will be lower, which makes the success rates of allocation
and handover and the RQ indexes lower, but can also reduce the
congestions. So you need to adjust this parameter based on the
actual network situations.
This value is a typical low value of the downlink level of the neighbor
Reason
cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.51.9 Is mutual adjacent cell

Full Name
Is mutual adjacent cell
Abbreviated Name
IsMutual
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a mutual neighbor cell.
Instance
RNC
Related FG
N/A
0..1
Unit
N/A
Default Value
Related Parameters
N/A
2-2571
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.52 Visit Paging Cell(GGsmVpcRelation)

2.52.1 Visit Paging Cell ID
Full Name
Visit Paging Cell ID
Abbreviated Name
GGsmVpcRelationId
Managed Object
Visit Paging Cell(GGsmVpcRelation)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a visit paging cell ID.
Instance
BSC
Related FG
N/A
2-2572
SJ-20140527134815-013|2015-03-10(R1.1)
2..128
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Adjacent Relation Configuration->Visit
Paging Cell
N/A
2.52.2 VPC Id
Full Name
VPC Id
Abbreviated Name
GGsmVpcRelationSeq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2573
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the ID of a VPC cell. The local cell has
a group of VPC cells (including the local cell) whose geographic
positions are close to it. An MS is more likely to be successfully
paged in a VPC cell if the previous service of the MS is initiated
in the local cell.
Instance
GsmRelation
Related FG
2..128
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Each VPC must have a unique ID.
Each VPC cell has a unique ID. The default value is irrelevant.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Paging Cell
V6.50.101/V6.30.101
N/A
2.52.3 DN of GGsmCell
Full Name
DN of GGsmCell
2-2574
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
refGGsmCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the referenced DN of the GSM source cell,

meaning the VPC cell of the local cell.
Instance
GsmRelation
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
The quantity of required VPC cells depends on the moving speed of
MSs in the local cell. If MSs move slowly, fewer VPC cells need to be
configured. If MSs move fast, more VPC cells need to be configured.
A cell whose geographical position is close to the local cell is
Reason
configured as a VPC cell.
Change take effect
No
Access
Read/Write
OMC Access path

Paging Cell
N/A
2-2575
SJ-20140527134815-013|2015-03-10(R1.1)
2.53 Adjacent UTRAN Cell

Configuration(GUtranRelation)
2.53.1 UTRAN Relation type
Full Name
UTRAN Relation type
Abbreviated Name
RelationType
Managed Object
Adjacent UTRAN Cell Configuration(GUtranRelation)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a UTRAN neighbor cell is the

target cell for only handover, only cell reselection, or both handover
and cell reselection.
Instance
External Utran Relation
Related FG

Handover
0: Handover and reselect

1: Reselect
2: Handover
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is generally set to 0, meaning that the neighbor cell
can be the target of handover and cell reselection. If the neighbor

cell can only be the target of cell reselection, this parameter must
be set to 1. If the neighbor cell can only be the target of handover,
this parameter must be set to 2.
2-2576
SJ-20140527134815-013|2015-03-10(R1.1)
Most UTRAN neighbor cells can be target cells for both handover
Reason
and cell reselection.
Change take effect
No
Access
Restricted
OMC Access path

Information Configuration->Adjacent Relation Configuration>Adjacent UTRAN Cell Configuration
V6.50.101/V6.30.101
N/A
2.53.2 DN of UTRAN FDD source cell

Full Name
DN of UTRAN FDD source cell
Abbreviated Name
refGExternalUtranCellFDD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the referenced DN of the UTRAN FDD

source cell, meaning the UTRAN FDD neighbor cell of the local cell.
Instance
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
2-2577
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
This parameter must be configured in accordance with the planned
radio data.
The default value is set in accordance with the planned radio data.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.53.3 DN of UTRAN TDD source cell

Full Name
DN of UTRAN TDD source cell
Abbreviated Name
refGExternalUtranCellTDDLcr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the referenced DN of the UTRAN TDD

source cell, meaning the UTRAN TDD neighbor cell of the local cell.
Instance
Related FG

Handover
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-2578
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
radio data.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.53.4 UTRAN Relation Sequence

Full Name
UTRAN Relation Sequence
Abbreviated Name
GUtranRelationSeq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a sequence number that uniquely identifies

a UTRAN neighbor cell of the local cell.
Instance
Related FG
2-2579
SJ-20140527134815-013|2015-03-10(R1.1)
{RelationType==0}[129..192]
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
radio data.
Reason
Change take effect
No
Access
Read
OMC Access path

N/A
2.53.5 RSCP offset handover to UTRAN adjacent cell

Full Name
RSCP offset handover to UTRAN adjacent cell
Abbreviated Name
HoRSCPOffset3G
Managed Object

3GPP Name
TDD_Qoffset, FDD_Qoffset
2-2580
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
A GSM to UTRAN handover can be successfully triggered when the

UTRAN neighbor cell meets the minimum requirement for normal
communication of the UE.
This parameter is a necessary condition for handover decision. It
ensures that the uplink and downlink field intensity is strong enough
for the UE to be handed over to the UTRAN neighbor cell. This
parameter also determines the priority of a UE for handover to
different neighbor cells.
This parameter must be configured when the neighbor cell is a
target of handover or cell reselection.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
Related Parameters
FDDRepQntCS
This parameter is valid only if the MS can report RSCP
Parameters
(FDDRepQntCS=0).
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value is, the more easily a handover to
a 3G neighbor cell is triggered.

The larger the parameter value is, the more difficult a handover to
The default value is set to prevent ping-pong handover in
Reason
accordance with the common radio conditions on the boundary

between 2G and 3G cells.
Change take effect
No
Access
Read/Write
OMC Access path

2-2581
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.53.6 Ec/No offset handover to UTRAN adjacent cell

Full Name
Ec/No offset handover to UTRAN adjacent cell
Abbreviated Name
HoEcNoOffset3G
Managed Object

3GPP Name
FDD_Qmin_Offset
3GPP Reference
N/A
Description

communication of the UE.
This parameter is a necessary condition for handover decision. It
ensures that the uplink and downlink field intensity is strong enough
for the UE to be handed over to the UTRAN neighbor cell. This
parameter also determines the priority of a UE for handover to
different neighbor cells.
This parameter must be configured when the neighbor cell is a
target of handover or cell reselection.
Instance
Cell
Related FG
0..49
Unit
N/A
Default Value
Related Parameters
FDDRepQntCS
This parameter is valid only if the MS can report Ec/No
Parameters
(FDDRepQntCS=1).
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2582
SJ-20140527134815-013|2015-03-10(R1.1)
The smaller the parameter value is, the more easily a handover to

The larger the parameter value is, the more difficult a handover to
The default value is set to prevent ping-pong handover in
Reason
accordance with the common radio conditions on the boundary

between 2G and 3G cells.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.53.7 CS adjacent cell report priority

Full Name
CS adjacent cell report priority
Abbreviated Name
RepPrioCS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the report priority of a neighbor cell.

order:
2-2583
SJ-20140527134815-013|2015-03-10(R1.1)
limit specified by RprtThoCSXXX (where, XXX indicates a frequency
specified by XXXRprtThoCS (where, XXX indicates a radio access
higher RepPrioCS have the higher report priority. Among neighbor
cells with the same RepPrioCS, the cells with the greater sum of
RprtThoCSXXX (or XXXRprtThoCS) and RprtOffsetCSXXX (or
XXXRprtOffsetCS) have the higher report priority.
Instance
Cell
Related FG

Handover
0: low
1: high
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
No modification is needed unless specially required.
Reason
Change take effect
2-2584
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.53.8 PS adjacent cell report priority

Full Name
PS adjacent cell report priority
Abbreviated Name
RepPrioPS
Managed Object

3GPP Name
REP_PRIORITY
3GPP Reference
N/A
Description
This parameter indicates the report priority of a neighbor cell. It

is broadcast to mobile stations through SI2quater, PSI3ter, and
PSI3quater.
order:
limit specified by RprtThoPSXXX (where, XXX indicates a frequency
2-2585
SJ-20140527134815-013|2015-03-10(R1.1)
specified by XXXRprtThoPS (where, XXX indicates a radio access
If the number of neighbor cells on a priority class does not reach the
allowed number, the neighbor cells on the lower priority class can
be reported. If the number of neighbor cells on each priority class
does not reach the allowed number, the other GSM neighbor cells
or neighbor cells supporting the other radio access technologies
can be reported even if the signal strength in these cells does
not reach the threshold. All the neighbor cells are not frequently
reported (if ReportRate is 1) except the cells with high report priority
(RepPrioPS). However, these neighbor cells are reported at least
once in four consecutive measurement reports.
Instance
Cell
Related FG
0: low
1: high
Unit
N/A
Default Value
Related Parameters
ReportRatePS
The parameter RepPrioPS is configured for each neighbor cell.
Parameters
The parameter RepRatePS is configured for the local cell. These

two parameters determine the frequency that a neighbor cell is
reported in measurement reports among all neighbor cells on the
same priority class.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Among neighbor cells on the lowest priority class, reporting a
neighbor cell with high priority is expected, meaning the parameter

RepPrioPS of this neighbor cell is set to "high". This neighbor cell
will be reported in each measurement report. Generally, all neighbor
cells are treated as equals. Neighbor cells with low priority are not
frequently reported (when ReportRatePS is 1). The default value is
recommended for the parameter RepPrioPS.
The default value is recommended by the protocol, which indicates
Reason
that the neighbor cell is reported normally.
Change take effect
2-2586
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.53.9 Target cell traffic threshold

Full Name
Target cell traffic threshold
Abbreviated Name
TargetCellTrafficThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

threshold is used to determine whether a handover to the target cell
is allowed. If the traffic in the target cell is higher than the threshold,
no handover to the cell is allowed.
This parameter is used for handover and cell reselection to a
UTRAN neighbor cell.
Instance
Cell
Related FG
0..100
Unit
Default Value
75
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2587
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
If the parameter is too large, congestion may occur easily in the
target cell.
The default value is set to ensure successful resource request
Reason
without causing congestion in the target cell.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.53.10 RSCP offset

Full Name
RSCP offset
Abbreviated Name
HoRSCPOffset3G_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

communication of the UE. This parameter is a necessary condition
for a 2G-to-3G PS handover. It ensures that the uplink and downlink
field intensity is high enough for the UE to be handed over to the
UTRAN neighbor cell. This parameter also determines the priority of
a UE for handover to different neighbor cells.
Instance
Related FG
0..63
Unit
N/A
2-2588
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value is set in accordance with common radio condition
Reason
on the boundary between 2G and 3G cells.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.53.11 EcNo offset

Full Name
EcNo offset
Abbreviated Name
HoEcNoOffset3G_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2589
SJ-20140527134815-013|2015-03-10(R1.1)
Description

communication of the UE. This parameter is a necessary condition
for a 2G-to-3G PS handover. It ensures that the uplink and downlink
field intensity is high enough for the UE to be handed over to the
UTRAN neighbor cell. This parameter also determines the priority of
a UE for handover to different neighbor cells.
Instance
Related FG
0..49
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value is set in accordance with common radio condition
Reason
on the boundary between 2G and 3G cells.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2590
SJ-20140527134815-013|2015-03-10(R1.1)
2.53.12 Target cell traffic threshold(PS)

Full Name
Target cell traffic threshold(PS)
Abbreviated Name
TargetCellTraThs_PS
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the traffic threshold of a 3G target cell

in a 2G to 3G PS handover. This threshold is used to determine
whether a PS handover to the target cell is allowed. If the traffic in
the target cell is higher than the threshold, no PS handover to the
cell is allowed.
Instance
Related FG
0..100
Unit
Default Value
70
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
needed.
The default value is set to ensure that the target cell has sufficient
Reason
resources for handover.
Change take effect
No
Access
Read/Write
2-2591
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.53.13 CCN support

Full Name
CCN support
Abbreviated Name
CCNSUPPORT
Managed Object

3GPP Name
CCN_ACTIVE
3GPP Reference
N/A
Description

CCN mode.
2-2592
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
NACCSupport
CCNActive
SIStatusInd
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
neighbor cell.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

N/A
2.53.14 the priority of Utran Cell

2-2593
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
the priority of Utran Cell
Abbreviated Name
UtranCellPrio
Managed Object

3GPP Name
UTRAN_PRIORITY
3GPP Reference
N/A
Description
This parameter indicates the priority of a UTRAN neighbor cell. It

is an important parameter used in the priority-based reselection
algorithm. A cell with a high priority is more likely to be a target
in cell reselection.
Instance
Cell
Related FG

Handover
0..7
Unit
N/A
Default Value
Related Parameters
PrioReselSupport,ServCellPrio,UtranDefaultPrio
When the parameter PrioReselSupport is set to "Support", the value
Parameters
of UtranCellPrio must be different from that of ServCellPrio, and

the default value of UtranCellPrio must be the same as the value
of UtranDefaultPrio.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter must be set to a value greater than ServCellPrio
when the MS uses the high priority cell reselection algorithm.

This parameter must be set to a value smaller than ServCellPrio
when the MS uses the low priority cell reselection algorithm.
The default value is the same as the value of UtranDefaultPrio.
Reason
Change take effect
No
2-2594
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.53.15 Is the directed retry ncell

Full Name
Is the directed retry ncell
Abbreviated Name
DirectRetryCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a UTRAN neighbor cell is a target

in directed retry. It is a parameter of the neighbor cell.
Instance
Related FG

Handover
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2595
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter must be configured in accordance with the network
planning. For example, the parameter must be set to "Yes" i the

neighbor cell is planned as a target of directed retry.
This parameter is a feature-related parameter. The default value
Reason
is set to "Yes".
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.54 Adjacent E-UTRAN Cell

Configuration(GEutranRelation)
2.54.1 Adjacent E-UTRAN Cell Configuration ID
Full Name
Adjacent E-UTRAN Cell Configuration ID
Abbreviated Name
GEutranRelationId
Managed Object
Adjacent E-UTRAN Cell Configuration(GEutranRelation)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an adjacent E-UTRAN cell configuration ID.
Instance
BSC
Related FG
N/A
1..64
Unit
N/A
Default Value
N/A
2-2596
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Adjacent Relation Configuration>Adjacent E-UTRAN Cell Configuration
N/A
2.54.2 DN of E-UTRAN FDD source cell

Full Name
DN of E-UTRAN FDD source cell
Abbreviated Name
refGExternalEutranCellFDD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an internal cell or external cell. An internal

cell is identified by siteid-btsid. An external cell is identified by ECID.
Instance
External EUtran Neighbor Cell
Related FG
N/A
2-2597
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
The UTRAN neighbor cell configuration depends on the network
planning. Generally, a UTRAN cell with geographic location close to

the local cell is configured as a neighbor cell.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.54.3 DN of E-UTRAN TDD source cell

Full Name
DN of E-UTRAN TDD source cell
Abbreviated Name
refGExternalEutranCellTDD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2598
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates an internal cell or external cell. An internal

cell is identified by siteid-btsid. An external cell is identified by ECID.
Instance
External EUtran Neighbor Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
The UTRAN neighbor cell configuration depends on the network
planning. Generally, a UTRAN cell with geographic location close to

the local cell is configured as a neighbor cell.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.54.4 E-UTRAN Relation Sequence

Full Name
E-UTRAN Relation Sequence
Abbreviated Name
GEutranRelationSeq
2-2599
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a sequence number that uniquely identifies

an E-UTRAN neighbor cell of the local cell.
Instance
Related FG

Handover
1..64
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
radio data.
Reason
Change take effect
No
Access
Read
OMC Access path

N/A
2-2600
SJ-20140527134815-013|2015-03-10(R1.1)
2.54.5 the PRIORITY of E-UTRAN cells for the specified EARFCN

Full Name
the PRIORITY of E-UTRAN cells for the specified EARFCN
Abbreviated Name
arfcnLtePrio
Managed Object

3GPP Name
E-UTRAN_PRIORITY
3GPP Reference
N/A
Description
This parameter indicates the priority of an E-UTRAN neighbor cell.

It is an important parameter used in the priority-based reselection
algorithm. A cell with a high priority is more likely to be a target
in cell reselection.
Instance
Cell
Related FG
N/A
0..7
Unit
N/A
Default Value
Related Parameters
PrioReselSupport,ServCellPrio,EUtranDefaultPrio
When the parameter PrioReselSupport is set to "Support", the value
Parameters
of EUtranCellPrio must be different from that of ServCellPrio, and

the default value of EUtranCellPrio must be the same as the value
of EUtranDefaultPrio.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter must be set to a value greater than ServCellPrio
when the MS uses the high priority cell reselection algorithm.

This parameter must be set to a value smaller than ServCellPrio
when the MS uses the low priority cell reselection algorithm.
The default value is the same as the value of EUtranDefaultPrio.
Reason
Change take effect
No
2-2601
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.54.6 CCN support

Full Name
CCN support
Abbreviated Name
ccnSupport
Managed Object

3GPP Name
CCN_ACTIVE
3GPP Reference
N/A
Description

2-2602
SJ-20140527134815-013|2015-03-10(R1.1)

CCN mode.
Instance
Cell
Related FG
N/A
0..1
Unit
N/A
Default Value
Related Parameters
NACCSupport
CCNActive
SIStatusInd
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
neighbor cell.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2603
SJ-20140527134815-013|2015-03-10(R1.1)
2.54.7 The re-selecting forbid flag of LTE Ncell

Full Name
The re-selecting forbid flag of LTE Ncell
Abbreviated Name
ncelBlackListInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an MS can make a cell reselection

Instance
Cell
Related FG
N/A
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter must be configured in accordance with the
requirement of the operator. Generally, cell reselection to the

neighbor cell is allowed.
Generally, cell reselection to any intra-frequency E-UTRAN neighbor
Reason
cell is allowed.
Change take effect
No
Access
Read/Write
2-2604
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.54.8 the PRIORITY of E-UTRAN cells

Full Name
the PRIORITY of E-UTRAN cells
Abbreviated Name
ArfcnLTEPrio_T
Managed Object

3GPP Name
E-UTRAN_PRIORITY
3GPP Reference
45.008
Description
This parameter specifies the priority of adjacent E-UTRAN cells in

transfer mode.
Instance
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
PrioReselSupport,ServCellPrio,EUtranDefaultPrio_T
When the parameter PrioReselSupport is set to "Yes", the value
Parameters
of EUtranCellPrio must be different from that of ServCellPrio, and

the default value of EUtranCellPrio must be the same as the value
of EUtranDefaultPrio_T.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Use a value greater than ServCellPrio if MS adopts the high-priority
reselection algorithm.
Use a value lower than ServCellPrio if MS adopts the low-priority
reselection algorithm.
2-2605
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is the same as EUtranDefaultPrio_T.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.54.9 the PRIORITY of E-UTRAN cells for FastReturn to LTE

Full Name
the PRIORITY of E-UTRAN cells for FastReturn to LTE
Abbreviated Name
ArfcnLTEPrioFR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the priority of the E-UTRAN cells selected

by the BSC for FastReturn to LTE.
Instance
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
R_PRIRESEL.ServCellPrio
ArfcnLTEPrioFR
The value of ArfcnLTEPrioFR must not be equal to that of
Parameters
ServCellPrio in R_PRIRESEL.
The ArfcnLTEPrioFR of ArfcnLTE under the same cell must the
same.
Value Type
long
2-2606
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
Set a higher priority for a neighbor cell that need be selected with
priority.
Every neighbor cell is treated with the same priority.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.54.10 This neighbour cell is Only for FastReturn

Full Name
This neighbour cell is Only for FastReturn
Abbreviated Name
OnlyForFR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the LTE neighbor cell is only

used for fast return. The protocol specifies that a system message
or measurement report can contain eight LTE frequencies, but
does not specify the maximum number of frequencies in a Channel
Release message used for fast return. Some operators require a
maximum of 16 frequencies used for fast return. This parameter is
used to specify a special LTE neighbor cell for fast return.
Instance
Related FG
2-2607
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
A maximum of eight different LTE neighbor cell frequencies
Parameters
can be configured for a 2G cell, except LTE neighbor cells with

OnlyForFR=1. The number of frequencies is calculated according
to FDD and TDD cells that allow reselection or does not allow
reselection.
A maximum of 16 different LTE neighbor cell frequencies can
be configured for a 2G cell, including LTE neighbor cells with
OnlyForFR=1. The number of frequencies is calculated according
to FDD and TDD cells that allow reselection or does not allow
reselection.
A maximum of 64 LTE neighbor cells (including LTE cells not
supporting reselection and neighbor cells with OnlyForFR=1) can be
configured for a 2G cell.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the network conditions
and operator requirements. If an LTE neighbor cell is only used for

fast return, this parameter is set to 1.

Reason
Generally, an LTE neighbor cell is not only used for fast return
unless more than eight LTE frequencies are required in the Channel
Release message.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2-2608
SJ-20140527134815-013|2015-03-10(R1.1)
2.55 User and Service Resource

Schedule(GUserAndSrvBasedSche)
2.55.1 User and Service Based Resource Schedule ID
Full Name
User and Service Based Resource Schedule ID
Abbreviated Name
GUserAndSrvBasedScheId
Managed Object
User and Service Resource Schedule(GUserAndSrvBasedSche)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a user and service based resource

scheduling ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
2-2609
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Information Configuration->GPRS Configuration->User and Service
Resource Schedule
N/A
2.55.2 Support resource optimizing by service

Full Name
Support resource optimizing by service
Abbreviated Name
SuppResOpByService
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a cell-level switch that determines whether to

support resource control based on service type.
Instance
Cell
Related FG

0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This switch can be turned on to enable the resource control feature
as required.
The service type based resource control is disabled by default.
Reason
Change take effect
2-2610
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

Resource Schedule
N/A
2.55.3 Threshold of PS resource congestion

Full Name
Threshold of PS resource congestion
Abbreviated Name
PSResourceThr1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a PS resource occupancy threshold. When

the service type based resource control is enabled, the number of
downlink channels allocated to each type of service is limited if the
PS resource occupancy in the current cell exceeds this threshold.
Instance
Cell
Related FG

2..95
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2611
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
If the parameter is set to a large value, the service type based
channel allocation is limited when the PS resource occupancy is

high. If the parameter is set to a small value, the service type based
channel allocation is limited when the PS resource occupancy is low.
The default value is set to limit the service type based channel
Reason
allocation when the PS resource occupancy reaches a certain

percentage.
Change take effect
No
Access
Read/Write
OMC Access path

Resource Schedule
N/A
2.55.4 Threshold of relieving PS resource congestion

Full Name
Threshold of relieving PS resource congestion
Abbreviated Name
PSResourceThr2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a PS resource occupancy threshold. When

the service type based resource control is enabled, the number of
downlink channels allocated to each type of service is not limited
if the PS resource occupancy in the current cell is lower than this
threshold.
Instance
Cell
Related FG

1..90
2-2612
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
25
Related Parameters
PSResourceThr0
PSResourceThr1 must have a smaller value than PSResourceThr0.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter is set to a large value, the limitation on service
type based channel allocation is cancelled when the PS resource

occupancy is high. If the parameter is set to a small value, the
limitation on service type based channel allocation is cancelled
when the PS resource occupancy is low.
The default value is set to cancel the limitation on the service type
Reason
based channel allocation when the PS resource occupancy is lower

than a certain percentage.
Change take effect
No
Access
Read/Write
OMC Access path

Resource Schedule
N/A
2.55.5 Traffic control based on service priority

Full Name
Traffic control based on service priority
Abbreviated Name
TrafficPrioCtrl
Managed Object

3GPP Name
N/A
2-2613
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates whether priority-based PS service flow

control is enabled. If the function is enabled, specific services are
processed accordingly based on the TimeSlotOff and ForceRel
configurations when the system is in congestion state.
Instance
Cell
Related FG
ZGO-03-01-005 Priority Based PS Congestion Control
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is set based on the operator's requirements. If you
want to limit specific services when the system is in congestion

state, enable this function and configure the limit type to TimeSlotOff
or ForceRel.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Resource Schedule
V6.50.201/V6.30.201
N/A
2-2614
SJ-20140527134815-013|2015-03-10(R1.1)
2.55.6 Allowed TimeSlot Number

Full Name
Allowed TimeSlot Number
Abbreviated Name
AllowTsNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the system cannot identify the service type and user class and
TrafficPrioCtr is enabled, TimeSlotOff is allowed only when the
number of the current occupied time slots is greater than or equal to
a threshold. This parameter indicates this threshold.
Instance
Cell
Related FG
0..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher this threshold is, when the system is in congestion state
and TrafficPrioCtrl is 1, the more difficult time slots are reduced, and
the less time slots are released. The lower this threshold is, the
easier time slots are reduced, and the more time slots are released.
This parameter is set based on usual multi-slot occupation.
Reason
Change take effect
No
Access
Read/Write
2-2615
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Resource Schedule
V6.50.201/V6.30.201
N/A
2.56 User Priority and Service Type

Configuration(GPsUserAndSrvType)
2.56.1 User Priority and Service Type Configuration ID
Full Name
User Priority and Service Type Configuration ID
Abbreviated Name
GPsUserAndSrvTypeId
Managed Object
User Priority and Service Type Configuration(GPsUserAndSrvType)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a user priority and service type

configuration ID.
Instance
BSC
Related FG
N/A
1..12
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2616
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Resource Schedule->User Priority and Service Type Configuration
N/A
2.56.2 User Type

Full Name
User Type
Abbreviated Name
userType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a user type: gold user, silver user, or

bronze user.
Instance
Cell
Related FG

0: gold user
1: silver user
2: bronze user
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2617
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set to a fixed value. No modification is needed.
The default value indicates a fixed type. No modification is needed.
Reason
Change take effect
No
Access
Read
OMC Access path

N/A
2.56.3 Service Type

Full Name
Service Type
Abbreviated Name
ServType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a service type: own service, browse

service, download service, or IM service.
Instance
Cell
Related FG

0: own service
1: browse service
2: download service
3: IM service
2-2618
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set to a fixed value. No modification is needed.
The default value indicates a fixed type. No modification is needed.
Reason
Change take effect
No
Access
Read
OMC Access path

N/A
2.56.4 Schedule Priority

Full Name
Schedule Priority
Abbreviated Name
SchedulePriority
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the scheduling priority for a service type. It

determines the scheduling duration of the type of services.
2-2619
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG

1..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
No modification is needed unless specially required. If the parameter
is set to a large value, the scheduling duration of the corresponding

user type and service type is long. If the parameter is set to a small
value, the scheduling duration of the corresponding user type and
service type is short.
The default value is a recommended value for three user types and
Reason
four service types.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.56.5 Downlink delay time

Full Name
Downlink delay time
Abbreviated Name
DlDelayTimeOfService
2-2620
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The BSC delays the release of a downlink TBF after data

transmission on the downlink TBF is completed. If the TBF receives
new data during the delay time, the BSC can transmit the data
immediately without the need of waiting for TBF re-establishment.
The BSC can set different delay time for different user levels and
service types to improve the utilization of radio resources.
Instance
Cell
Related FG

50..4000
Unit
N/A
Default Value
2000
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
No modification is needed unless specially required. The smaller
the parameter value is, the more shortly the downlink TBF is
maintained for services of the corresponding user type and service
type after data transmission is completed on the TBF. The larger the
parameter value is, the longer the downlink TBF is maintained for
services of the corresponding user type and service type after data
transmission is completed on the TBF.
Reason
four service types.
Change take effect
No
Access
Read/Write
2-2621
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

N/A
2.56.6 TBF occupancy

Full Name
TBF occupancy
Abbreviated Name
TBFNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The number of TBFs on a radio channel is limited. The data

importance and transmission procedure varies with different user
levels and service types. To ensure stable data transmission for
high level users and allow the access of more users, different TBF
occupancy can be configured for different users and services.
Instance
Cell
Related FG

1: 0.5 TBF occupancy

2: 1 TBF occupancy
4: 2 TBF occupancy
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2622
SJ-20140527134815-013|2015-03-10(R1.1)
the parameter value is, the more services corresponding to the user
level and service type can be admitted by the channel.
Reason
four service types.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.56.7 Max PDTCH num

Full Name
Max PDTCH num
Abbreviated Name
MaxPdtchNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of channels that can

be allocated to a type of services in case of congestion.
Instance
Cell
Related FG

1..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2623
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
the parameter value is, the fewer channels can be allocated for the
corresponding user level and service type. The larger the parameter
value is, the more channels can be allocated for the corresponding
user level and service type.
Reason
four service types.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.56.8 Preempt priority

Full Name
Preempt priority
Abbreviated Name
PreemptPriority
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the preemption priority for a specific type

of services.
Instance
Cell
Related FG

2-2624
SJ-20140527134815-013|2015-03-10(R1.1)
0..11
Unit
N/A
Default Value
11
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
the parameter value is, the higher the preemption priority is. The
larger the parameter value is, the lower the preemption priority is.
Reason
four service types.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.56.9 TimeSlot off based on service and subscriber

Full Name
TimeSlot off based on service and subscriber
Abbreviated Name
TimeSlotOff
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2625
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether time slot reduction is allowed.

This parameter is set based on the service type and user class.
Instance
Cell
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
want to limit specific services when the system is in congestion state

and TrafficPrioCtr is enabled, configure the limit type to TimeSlotOff
or ForceRel as required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.56.10 Force release based on service and subscriber

2-2626
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Force release based on service and subscriber
Abbreviated Name
ForceRel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether forced service release is allowed.

This parameter is set based on the service type and user class. If
both TimeSlotOff and ForceRel are enabled, ForceRel is preferred.
Instance
Cell
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
want to limit specific services when the system is in congestion state

and TrafficPrioCtr is enabled, configure the limit type to TimeSlotOff
or ForceRel as required.
Reason
Change take effect
No
Access
Read/Write
2-2627
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.201/V6.30.201
N/A
2.57 Cell Reserved Configuration(GCellRsv)

2.57.1 Cell Reserved Configuration ID
Full Name
Cell Reserved Configuration ID
Abbreviated Name
GCellRsvId
Managed Object
Cell Reserved Configuration(GCellRsv)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a cell reserved configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
2-2628
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Restricted
OMC Access path

Information Configuration->Cell Reserved Configuration
N/A
2.57.2 Cell Reserved Parameter 1

Full Name
Cell Reserved Parameter 1
Abbreviated Name
reserved1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Reserved cell parameter 1
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
2-2629
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
2-2630
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-2631
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-2632
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
2-2633
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2634
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2635
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
2-2636
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved9
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
0
2-2637
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
2-2638
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved11
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
2-2639
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved12
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
2-2640
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved13
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2-2641
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved14
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

2-2642
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved15
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2643
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved16
Managed Object

3GPP Name
N/A
2-2644
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved17
Managed Object

2-2645
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved18
Managed Object

2-2646
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
reserved19
2-2647
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name

2-2648
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
reserved20
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2649
SJ-20140527134815-013|2015-03-10(R1.1)
2.58 Priority-based Resel

Configuration(GPriorityResel)
2.58.1 Priority-based Resel Configuration ID
Full Name
Priority-based Resel Configuration ID
Abbreviated Name
GPriorityReselId
Managed Object
Priority-based Resel Configuration(GPriorityResel)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a priority-based reselection configuration

ID.
Instance
BSC
Related FG
N/A
0..1
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
2-2650
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Information Configuration->Priority-based Resel Configuration
N/A
2.58.2 Cell re-selection Switch Based on priority

Full Name
Cell re-selection Switch Based on priority
Abbreviated Name
PrioReselSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to enable the priority based

cell reselection feature.
Instance
Related FG
Cell
Handover
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
The PrioReselSupport switch must be turned on when LTE
Parameters
neighbor cells exist. LTE or 3G neighbor cells must exist when the
PrioReselSupport switch is turned on.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This switch must be turned on when an LTE neighbor cell is
configured for cell reselection. In the other cases, this switch is

turned off.
2-2651
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.58.3 Priority of GSM cells

Full Name
Priority of GSM cells
Abbreviated Name
ServCellPrio
Managed Object

3GPP Name
GERAN_PRIORITY
3GPP Reference
N/A
Description
This parameter indicates the priority of a GSM cell for the

priority-based handover decision algorithm.
Instance
Cell
Related FG

Handover
0..7
Unit
N/A
Default Value
Related Parameters
UtranDefaultPrio,EUtranDefaultPrio
The parameter ServCellPrio must have a value different from
Parameters
UtranDefaultPrio and EUtranDefaultPrio.
Value Type
long
2-2652
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
A higher priority can be set for a GSM cell if the MS is expected to
camp on the GSM cell. A lower priority can be set for the GSM cell if
the MS is expected to make a cell reselection to another network.
This parameter must be configured in accordance with the network
Reason
condition. The default value (0) is not recommended.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.58.4 threshold of serving cell that used by priority Cell

re-selection algorithm
Full Name
threshold of serving cell that used by priority Cell re-selection

algorithm
Abbreviated Name
THRESHPRIORYSEARCH
Managed Object

3GPP Name
THRESH_Priority_Search
3GPP Reference
N/A
Description
This parameter indicates a threshold used in the priority-based cell

reselection algorithm. When RLA_C of the local cell is lower than
this threshold, the MS must monitor lower-priority neighbor cells
using the other radio access technologies. When RLA_C of the
local cell is higher than this threshold, the MS is allowed not to
monitor lower-priority neighbor cells using the other radio access
technologies.
2-2653
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG

Handover
0: -98
1: -95
2: -92
3: -89
4: -86
5: -83
6: -80
7: -77
8: -74
9: -71
10: -68
11: -65
12: -62
13: -59
14: -56
15: always
Unit
dBm
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The MS attempts to detect 3G and LTE neighbor cells only when
the level of the GSM serving cell is lower than this threshold. If
the parameter is adjusted to a larger value, the MS monitors less
neighbor cells using the other radio access technologies. If the
parameter is adjusted to a smaller value, the MS monitors more
neighbor cells using the other radio access technologies.
The default value is set to allow the MS to always monitor neighbor
Reason
cells using the other radio access technologies. The more cells are
monitored, the more target cells are available for cell reselection.
Change take effect
2-2654
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.58.5 threshold that Allow MS re-select to lower priority Cell

Full Name
threshold that Allow MS re-select to lower priority Cell
Abbreviated Name
THRESHGSMLOW
Managed Object

3GPP Name
THRESH_GSM_low
3GPP Reference
N/A
Description
This parameter indicates the threshold that determines whether

the MS is allowed to make a cell reselection to a lower-priority
cell. When both the C1 value of the local cell and that of the GSM
neighbor cell are lower than this threshold, the MS is allowed to
make a cell reselection to a lower-priority neighbor cell using another
radio access technology.
Instance
Cell
Related FG

Handover
2-2655
SJ-20140527134815-013|2015-03-10(R1.1)
0: 0 dB
1: 2 dB
2: 4 dB
3: 6 dB
4: 8 dB
5: 10 dB
6: 12 dB
7: 14 dB
8: 16 dB
9: 18 dB
10: 20 dB
11: 22 dB
12: 24 dB
13: 26 dB
14: 28 dB
15: always
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the parameter value is, the more neighbor cells using the
other radio access technologies are available for cell reselection.

The smaller the parameter value is, the fewer neighbor cells using
the other radio access technologies are available for cell reselection.
The default value is set to allow cell reselection to any lower-priority
Reason
neighbor cell, meaning plenty of target cells are available for cell
reselection.
Change take effect
No
Access
Read/Write
OMC Access path

2-2656
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.58.6 Hysteresis of priority reselection algorithm

Full Name
Hysteresis of priority reselection algorithm
Abbreviated Name
HysteresisofPRiority
Managed Object

3GPP Name
H_PRIO
3GPP Reference
N/A
Description
This parameter indicates the hysteresis for the cell reselection

algorithm. Cell reselection to a neighbor cell using another radio
access technology is allowed when the C1 value of the neighbor
cell is greater than that of the local cell and the C1 difference is
HysteresisofPRiority.
Instance
Cell
Related FG

Handover
0: rule disabled
1: 5dB
2: 4dB
3: 3dB
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2657
SJ-20140527134815-013|2015-03-10(R1.1)
The larger the parameter value is, the more easily such neighbor
cells are selected. The smaller the parameter value is, the more
difficult such neighbor cells are selected.
Neighbor cells determined by the hysteresis are not optimal target
Reason
cells of cell reselection.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.58.7 Time hysteresis of priority reselection algorithm

Full Name
Time hysteresis of priority reselection algorithm
Abbreviated Name
TimeHysteresisofReS
Managed Object

3GPP Name
T_Reselection
3GPP Reference
N/A
Description
This parameter indicates the time hysteresis for the cell reselection
algorithm. An MS can only make a cell reselection to a neighbor
cell using another radio access technology when the neighbor cell
meets the reselection conditions and maintains this situation during
the period specified by this parameter.
Instance
Cell
Related FG

Handover
2-2658
SJ-20140527134815-013|2015-03-10(R1.1)
0: 5
1: 10
2: 15
3: 20
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
A large value of this parameter indicates a long hysteresis time,
which makes the selection of neighbor cells more reliable. A small

value of this parameter indicates a short hysteresis time, which
allows faster cell reselection.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.58.8 the default priority of Utran Cells

Full Name
the default priority of Utran Cells
Abbreviated Name
UtranDefaultPrio
Managed Object

2-2659
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
DEFAULT_UTRAN_PRIORITY
3GPP Reference
N/A
Description
This parameter indicates the default priority of UTRAN cells.
Instance
Cell
Related FG

Handover
0..7
Unit
N/A
Default Value
Related Parameters
ServCellPrio
UtranDefaultPrio and ServCellPrio must have different values.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is not used. No modification is needed.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.58.9 the maximum thresholds of Utran reselection

Full Name
the maximum thresholds of Utran reselection
2-2660
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
UtranHighThresh
Managed Object

3GPP Name
THRESH_UTRAN_high
3GPP Reference
N/A
Description
This parameter indicates the high threshold of signal difference that

is used to determine cell reselection to a UTRAN neighbor cell for an
MS that supports the priority-based cell reselection algorithm. When
a UTRAN neighbor cell has a higher priority than the local cell, the
MS can make a cell reselection to the neighbor cell if the measured
value in cell reselection is greater than this threshold.
Instance
Related FG
Cell
Handover
0..31
Unit
2dB
Default Value
[20,18,16,14,12,10,8,6]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter value corresponding to a priority is adjusted to a
smaller value, cell reselection to UTRAN neighbor cells is easier. If

the parameter value is adjusted to a larger value, cell selection to
UTRAN neighbor cells is more difficult.
The default value is set in accordance with the priority. The lower
Reason
the priority is, the more easily the MS makes a cell reselection to the
neighbor cell.
Change take effect
No
Access
Read/Write
2-2661
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.202/V6.30.202
ADD
2.58.10 the minimum thresholds of Utran reselection

Full Name
the minimum thresholds of Utran reselection
Abbreviated Name
UtranLowThresh
Managed Object

3GPP Name
THRESH_UTRAN_low
3GPP Reference
N/A
Description
This parameter indicates the low threshold of signal difference that

is used to determine cell reselection to a UTRAN neighbor cell for
an MS that supports the priority-based cell reselection algorithm.
When a UTRAN neighbor cell has a lower priority than the local
cell, the MS can make a cell reselection to the neighbor cell if the
neighbor cell meets all the other conditions for cell reselection and
the measured value is greater than this threshold.
Instance
Cell
Related FG

Handover
0..31
Unit
2dB
Default Value
[20,18,16,14,12,10,8,6]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2662
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.58.11 Minimum RX level for Utran cells

Full Name
Minimum RX level for Utran cells
Abbreviated Name
UtranQRXLEVMIN
Managed Object

3GPP Name
UTRAN_QRXLEVMIN
3GPP Reference
N/A
Description
This parameter indicates the minimum Rx level that is used to

determine cell reselection to a UTRAN neighbor cell for an MS that
supports the priority-based cell reselection algorithm.
Instance
Cell
Related FG
N/A
0..31(0 = -140 dBm, 1 = -138 dBm, 2 = -136 dBm, , 30 = -80 dBm,

31 = -78 dBm)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
N/A
2-2663
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.58.12 the default priority of EUtran Cells

Full Name
the default priority of EUtran Cells
Abbreviated Name
EUtranDefaultPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the default priority of E-UTRAN cells.
Instance
Cell
Related FG

Handover
2-2664
SJ-20140527134815-013|2015-03-10(R1.1)
0..7
Unit
N/A
Default Value
Related Parameters
ServCellPrio
EUtranDefaultPrio and ServCellPrio must have different values.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is not used. No modification is needed.
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.58.13 the maximum thresholds of EUtran reselection

Full Name
the maximum thresholds of EUtran reselection
Abbreviated Name
EUtranHighThresh
Managed Object

3GPP Name
THRESH_E-UTRAN_high
3GPP Reference
N/A
2-2665
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the high threshold of signal difference that

is used to determine cell reselection to an E-UTRAN neighbor cell
for an MS. When an E-UTRAN neighbor cell has a higher priority
than the local cell, the MS can reselect to the neighbor cell if the
measured value (RSRP-EUtranQRXLEVMIN) in cell reselection is
greater than this threshold.
Instance
Cell
Related FG
0..31(0 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, , 30 = 60 dB, 31 =

62 dB)
Unit
2dB
Default Value
[20,18,16,14,12,10,8,6]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value corresponding to a priority is adjusted to a smaller value,
cell reselection to E-UTRAN neighbor cells is easier. If the value is

adjusted to a larger value, cell selection to E-UTRAN neighbor cells
is more difficult.

Reason
The default value of each priority is set to a signal level that can
be accepted when an MS reselects a neighbor cell. The higher
the priority is, the lower the threshold is, the more easily the MS
reselects this neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2-2666
SJ-20140527134815-013|2015-03-10(R1.1)
2.58.14 the minimum thresholds of EUtran reselection

Full Name
the minimum thresholds of EUtran reselection
Abbreviated Name
EUtranLowThresh
Managed Object

3GPP Name
THRESH_E-UTRAN_low
3GPP Reference
N/A
Description
This parameter indicates the low threshold of signal difference that

for an MS. When an E-UTRAN neighbor cell has a lower priority
than the local cell,
the MS can reselect the neighbor cell if the neighbor cell meets all
the other conditions for cell reselection and the measured value
(RSRP-UtranQRXLEVMIN) is greater than this threshold.
Instance
Cell
Related FG
0..31(0 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, , 30 = 60 dB, 31 =

62 dB)
Unit
2dB
Default Value
[20,18,16,14,12,10,8,6]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value corresponding to a priority is adjusted to a smaller value,
cell reselection to E-UTRAN neighbor cells is easier. If the value is

adjusted to a larger value, cell selection to E-UTRAN neighbor cells
is more difficult.
The default value of each priority is set to a signal level that can
Reason
be accepted when an MS reselects a neighbor cell. The higher

the priority is, the lower the threshold is, the more easily the MS
reselects this neighbor cell.
Change take effect
2-2667
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.58.15 Minimum RX level for EUtran cells

Full Name
Minimum RX level for EUtran cells
Abbreviated Name
EUtranQRXLEVMIN
Managed Object

3GPP Name
E-UTRAN_QRXLEVMIN
3GPP Reference
N/A
Description
This parameter indicates the minimum Rx level that is used to

determine cell reselection to an E-UTRAN neighbor cell for an MS.
Instance
Cell
Related FG

Handover
0..31(0 = -140 dBm, 1 = -138 dBm, 2 = -136 dBm, , 30 = -80 dBm,

31 = -78 dBm)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2668
SJ-20140527134815-013|2015-03-10(R1.1)
smaller value, cell reselection to E-UTRAN neighbor cells is easier.

If the parameter value is adjusted to a larger value, cell selection
to E-UTRAN neighbor cells is more difficult.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.58.16 High RSRQ thresholds for EUtran reselection

Full Name
High RSRQ thresholds for EUtran reselection
Abbreviated Name
EUtranHighThreshQ
Managed Object

3GPP Name
E-UTRAN_QQUALMIN
3GPP Reference
N/A
Description
This parameter indicates the high threshold of RSRQ difference that

for an MS. When an E-UTRAN neighbor cell has a lower priority than
the local cell, the MS can make a cell reselection to the neighbor cell
if the neighbor cell meets all the other conditions for cell reselection
and the measured value (RSRQ-EUtranQQUALMIN) is greater than
this threshold.
Instance
Cell
Related FG
0..31(0 = 0 dB, 1 = 1 dB, 2 = 2 dB, 3 = 3 dB, , 30 = 30 dB, 31 =

31 dB)
Unit
dB
2-2669
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
[26,24,22,20,18,16,14,12]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No


Reason
neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.58.17 Low RSRQ thresholds for EUtran reselection

Full Name
Low RSRQ thresholds for EUtran reselection
Abbreviated Name
EUtranLowThreshQ
Managed Object

3GPP Name
THRESH_E-UTRAN_high_Q
3GPP Reference
N/A
2-2670
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the low threshold of RSRQ difference that

for an MS. When an E-UTRAN neighbor cell has a lower priority than
the local cell, the MS can make a cell reselection to the neighbor cell
if the neighbor cell meets all the other conditions for cell reselection
and the measured value (RSRQ-EUtranQQUALMIN) is greater than
this threshold.
Instance
Cell
Related FG
0..31(0 = 0 dB, 1 = 1 dB, 2 = 2 dB, 3 = 3 dB, , 30 = 30 dB, 31 =

31 dB)
Unit
dB
Default Value
[26,24,22,20,18,16,14,12]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
neighbor cell.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2-2671
SJ-20140527134815-013|2015-03-10(R1.1)
2.58.18 Minimum RSRQ for EUtran cells

Full Name
Minimum RSRQ for EUtran cells
Abbreviated Name
EUtranQQUALMIN
Managed Object

3GPP Name
THRESH_E-UTRAN_low_Q
3GPP Reference
N/A
Description
This parameter indicates the minimum RSRQ that is used to

determine cell reselection to an E-UTRAN neighbor cell.
Instance
Cell
Related FG
0: -34 dB
1: -32 dB
2: -30 dB
3: -28 dB
4: -26 dB
5: -24 dB
6: -22 dB
7: -20 dB
8: -18 dB
9: -16 dB
10: -14 dB
11: -12 dB
12: -10 dB
13: -8 dB
14: -6 dB
15: -4 dB
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2672
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.100/V6.30.100
N/A
2.58.19 Minimum RSRQ for EUtran cells based on RSRP

Full Name
Minimum RSRQ for EUtran cells based on RSRP
Abbreviated Name
EUtranQMIN
Managed Object

3GPP Name
E-UTRAN_Qmin
3GPP Reference
3GPP TS 44.060 R9
Description
This parameter indicates the minimum RSRQ required for cell

reselection to an E-UTRAN neighbor cell. An MS can make a cell
reselection to an LTE neighbor cell when the RSRQ in this neighbor
cell is greater than the minimum RSRQ.
Instance
Cell
Related FG
2-2673
SJ-20140527134815-013|2015-03-10(R1.1)
0: -34 dB
1: -32 dB
2: -30 dB
3: -28 dB
4: -26 dB
5: -24 dB
6: -22 dB
7: -20 dB
8: -18 dB
9: -16 dB
10: -14 dB
11: -12 dB
12: -10 dB
13: -8 dB
14: -6 dB
15: -4 dB
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
EnhancedResParaInd
This parameter is issued when the corresponding switch is turned
Parameters
on.
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value is, the more likely the MS makes a
cell reselection to a neighbor cell. The larger the parameter is, the
more stable the MS is after reselection to a neighbor cell.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-2674
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.58.20 Minimum RSRP RX level for EUtran cells

Full Name
Minimum RSRP RX level for EUtran cells
Abbreviated Name
EutranRSRPMIN
Managed Object

3GPP Name
E-UTRAN_RSRPmin
3GPP Reference
3GPP TS 44.060 R9
Description
This parameter indicates the minimum RSRP required for cell

reselection to an E-UTRAN neighbor cell. An MS can make a cell
reselection to an LTE neighbor cell when the RSRP in this neighbor
cell is greater than the minimum RSRP.
Instance
Cell
Related FG
0: -140 dB
1: -138 dB
2: -136 dB
3: -134 dB
4: -132 dB
5: -130 dB
6: -128 dB
7: -126 dB
8: -124 dB
9: -122 dB
10: -120 dB
11: -118 dB
12: -116 dB
13: -114 dB
14: -112 dB
15: -110 dB
16: -108 dB
17: -106 dB
18: -104 dB
19: -102 dB
20: -100 dB
21: -98 dB
22: -96 dB
2-2675
SJ-20140527134815-013|2015-03-10(R1.1)
23: -94 dB
24: -92 dB
25: -90 dB
26: -88 dB
27: -86 dB
28: -84 dB
29: -82 dB
30: -80 dB
31: -78 dB
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
EnhancedResParaInd
This parameter is issued when the corresponding switch is turned
Parameters
on.
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the parameter value is, the more likely the MS makes a
cell reselection to a neighbor cell. The larger the parameter is, the
more stable the MS is after reselection to a neighbor cell.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.58.21 Enhanced Cell Reselection Parameters Indication

Full Name
Enhanced Cell Reselection Parameters Indication

2-2676
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
EnhancedResParaInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the enhanced parameters

for cell reselection to E-UTRAN are issued. These additional
parameters are specified in the R9 protocol, including EUtranQMIN
and EUtranRSRPMIN.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to "Yes" when more accurate control of
cell reselection is required by the operator.
This parameter is added according to the R9 protocol. It is set to
Reason
"No" by default.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2677
SJ-20140527134815-013|2015-03-10(R1.1)
2.58.22 the default priority of EUtran Cell in packet transfer mode

Full Name
the default priority of EUtran Cell in packet transfer mode
Abbreviated Name
EUtranDefaultPrio_T
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the default priority of an E-UTRAN cell in

packet transfer mode. The greater the value is, the higher priority
it is.
Instance
Cell
Related FG
0..7
Unit
N/A
Default Value
Related Parameters
ServCellPrio
EUtranDefaultPrio_T and ServCellPrio must have different values.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is big, the EUTRAN cell reselection priority is high.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
2-2678
SJ-20140527134815-013|2015-03-10(R1.1)
ADD
2.58.23 the maximum thresholds of EUtran reselection in packet

transfer mode
Full Name
the maximum thresholds of EUtran reselection in packet transfer

mode
Abbreviated Name
EUtranHighThresh_T
Managed Object

3GPP Name
THRESH_E-UTRAN_high
3GPP Reference
45.008
Description
This parameter indicates the higher threshold of signal difference

that is used to determine cell reselection to an E-UTRAN neighbor
cell for an MS in packet transfer mode.
Instance
Cell
Related FG
0..31(0 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, , 30 = 60 dB, 31 =

62 dB.)
Unit
2dB
Default Value
[20,18,16,14,12,10,8,6]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is big, it is difficult to reselect a high-priority EUTRAN
neighbor cell. If the value is small, it is easy to list a high-priority

EUTRAN neighbor cell as a candidate one.
Reason
Change take effect
No
2-2679
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.58.24 the minimum thresholds of EUtran reselection in packet

transfer mode
Full Name
the minimum thresholds of EUtran reselection in packet transfer

mode
Abbreviated Name
EUtranLowThresh_T
Managed Object

3GPP Name
THRESH_E-UTRAN_low
3GPP Reference
45.008
Description
This parameter indicates the lower threshold of signal difference that

for an MS in packet transfer mode.
Instance
Cell
Related FG
0..31(0 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, , 30 = 60 dB, 31 =

62 dB.)
Unit
2dB
Default Value
[20,18,16,14,12,10,8,6]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2680
SJ-20140527134815-013|2015-03-10(R1.1)
If the value is big, it is difficult to reselect a low-priority EUTRAN

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.58.25 Minimum RX level for EUtran cells in packet transfer mode

Full Name
Minimum RX level for EUtran cells in packet transfer mode
Abbreviated Name
EUtranQRXLEVMIN_T
Managed Object

3GPP Name
E-UTRAN_QRXLEVMIN
3GPP Reference
45.008
Description
This parameter indicates the lower threshold of signal that is used to

determine cell reselection to an E-UTRAN neighbor cell for an MS
in packet transfer mode.
Instance
Cell
Related FG
0..31(0 = -140 dBm, 1 = -138 dBm, 2 = -136 dBm, , 30 = -80 dBm,

31 = -78 dBm.)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
2-2681
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is big and with the same EUtranHighThresh_T or
EUtranLowThresh_T values, it is difficult to reselect a EUTRAN

neighbor cell. If the value is small, it is easy to reselect an EUTRAN
neighbor cell.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.58.26 High RSRQ thresholds for EUtran reselection in packet

transfer mode
Full Name
High RSRQ thresholds for EUtran reselection in packet transfer

mode
Abbreviated Name
EUtranHighThreshQ_T
Managed Object

3GPP Name
THRESH_E-UTRAN_high_Q
3GPP Reference
45.008
Description
This parameter indicates the higher threshold of RSRQ that is used

to determine cell reselection to an E-UTRAN neighbor cell for an MS
Instance
Cell
Related FG

2-2682
SJ-20140527134815-013|2015-03-10(R1.1)
0..31(0 = 0 dB, 1 = 1 dB, 2 = 2 dB, 3 = 3 dB, , 30 = 30 dB, 31 =

31 dB.)
Unit
dB
Default Value
[26,24,22,20,18,16,14,12]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is big, it is difficult to reselect a high-priority EUTRAN

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.58.27 Low RSRQ thresholds for EUtran reselection in packet

transfer mode
Full Name
Low RSRQ thresholds for EUtran reselection in packet transfer

mode
Abbreviated Name
EUtranLowThreshQ_T
Managed Object

2-2683
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
THRESH_E-UTRAN_low_Q
3GPP Reference
45.008
Description
This parameter indicates the lower threshold of RSRQ that is used

Instance
Cell
Related FG
0..31(0 = 0 dB, 1 = 1 dB, 2 = 2 dB, 3 = 3 dB, , 30 = 30 dB, 31 =

31 dB.)
Unit
dB
Default Value
[26,24,22,20,18,16,14,12]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is big, it is difficult to reselect a low-priority EUTRAN

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.58.28 Minimum RSRQ for EUtran cells in packet transfer mode

2-2684
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Minimum RSRQ for EUtran cells in packet transfer mode
Abbreviated Name
EUtranQQUALMIN_T
Managed Object

3GPP Name
E-UTRAN_QQUALMIN
3GPP Reference
45.008
Description
This parameter specifies the minimum RSRQ for E-UTRAN cell

reselection in packet transfer mode.
Instance
Cell
Related FG
0..15(0= -34dB, 1= -32dB, 2= -30dB, , 14= -6dB, 15= -4dB.)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is big and with the same EUtranHighThreshQ_T or
EUtranLowThreshQ_T, it is difficult to reselect an EUTRAN neighbor

cell. If the value is small, it is easy to reselect a EUTRAN neighbor
cell.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2-2685
SJ-20140527134815-013|2015-03-10(R1.1)
2.58.29 Minimum RSRQ for EUtran cells based on RSRP in packet

transfer mode
Full Name
Minimum RSRQ for EUtran cells based on RSRP in packet transfer

mode
Abbreviated Name
EUtranQMIN_T
Managed Object

3GPP Name
E-UTRAN_Qmin
3GPP Reference
45.008
Description
This parameter indicates the lower threshold of RSRQ that is used

Instance
Cell
Related FG
0..15(0= -34dB, 1= -32dB, 2= -30dB, , 14= -6dB, 15= -4dB.)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the value is, the easier a EUTRAN neighbor cell is to
be reselected.
Reason
Change take effect
No
Access
Read/Write
2-2686
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.103/V6.30.103
N/A
2.58.30 Minimum RSRP RX level for EUtran cells in packet transfer

mode
Full Name
Minimum RSRP RX level for EUtran cells in packet transfer mode
Abbreviated Name
EutranRSRPMIN_T
Managed Object

3GPP Name
E-UTRAN_RSRPmin
3GPP Reference
45.008
Description
This parameter indicates the lower threshold of signal that is used to

determine cell reselection to an E-UTRAN neighbor cell for an MS
Instance
Cell
Related FG
0..31(0 = -140 dBm, 1 = -138 dBm, 2 = -136 dBm, , 30 = -80 dBm,

31 = -78 dBm.)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller the value is, the easier a EUTRAN neighbor cell is to
be reselected.
Reason
2-2687
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.58.31 the minimum thresholds for FastReturn to LTE

Full Name
the minimum thresholds for FastReturn to LTE
Abbreviated Name
EUtranLowThreshFR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold of the difference

between the downlink Rx level and the minimum Rx level
(EUtranQRXLEVMINFR) when the BSC selects adjacent E-UTRAN
target cells for FastReturn to LTE.
To select such adjacent E-UTRAN target cells based on
the RSRP reported by an MS, the BSC searches the cells
fulfilling the conditions that the difference between the RSRP
and the EUtranQRXLEVMINFR value is greater than the
EUTRANLowThreshFR value of the cell's priority in the descending
order of cell priorities. For the cells with the same priority, it chooses
the one with greater difference first. If such adjacent cells do
not exist, the BSC selects the adjacent E-UTRAN cells whose
EUtranQRXLEVMINFR value of the priority is less than the RSRP.
Instance
Cell
Related FG
0..31(0 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, , 30 = 60 dB, 31 =

62 dB)
Unit
2dB
2-2688
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
[20,18,16,14,12,10,8,6]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
Use a smaller value if it should be easier to reselect a neighbor
cell with a certain priority level.
The lower the priority of an adjacent E-UTRAN cell, the greater the
Reason
level for fast returning to this cell is required.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.58.32 Minimum RX level of EUtran cells for FastReturn to LTE

Full Name
Minimum RX level of EUtran cells for FastReturn to LTE
Abbreviated Name
EUtranQRXLEVMINFR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2689
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies the minimum Rx level of adjacent

E-UTRAN target cells for FastReturn to LTE.To select such adjacent
E-UTRAN target cells based on the RSRP reported by an MS, the
BSC searches the cells fulfilling the conditions that the difference
between the RSRP and the EUtranQRXLEVMINFR value is greater
than the EUTRANLowThreshFR value of the cell's priority in the
descending order of cell priorities. For the cells with the same
priority, it chooses the one with greater difference first. If such
adjacent cells do not exist, the BSC selects the adjacent E-UTRAN
cells whose EUtranQRXLEVMINFR value of the priority is less than
the RSRP.
Instance
Cell
Related FG
0..31(0 = -140 dBm, 1 = -138 dBm, 2 = -136 dBm, , 30 = -80 dBm,

31 = -78 dBm)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
Raise this value a bit if it is expected to perform FastReturn only
when the EUTRAN neighbor cell has a quite high level. The same
value can be used for different priority levels.
It is easy and practical to select adjacent E-UTRAN cells for fast
Reason
returning with the parameter EUtranLowThreshFR, which is set to 0.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
2-2690
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.58.33 Low RSRQ thresholds for FastReturn to LTE

Full Name
Low RSRQ thresholds for FastReturn to LTE
Abbreviated Name
EUtranLowThreshQFR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the threshold of the difference between the

RSRQ and the minimum RSRQ (EUtranQQUALMINFR) when the
BSC selects adjacent E-UTRAN target cells for FastReturn to LTE.
the RSRQ reported by an MS, the BSC searches the cells
fulfilling the conditions that the difference between the RSRQ
and the EUtranQQUALMINFR value is greater than the
EUtranLowThreshQFR value of the cell's priority in the descending
EUtranQQUALMINFR value of the priority is less than the RSRQ.
Instance
Cell
Related FG
0..31(0 = 0 dB, 1 = 1 dB, 2 = 2 dB, 3 = 3 dB, , 30 = 30 dB, 31 =

31 dB)
Unit
2dB
Default Value
[26,24,22,20,18,16,14,12]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2691
SJ-20140527134815-013|2015-03-10(R1.1)
Use a smaller value if it should be easier to reselect a neighbor
cell with a certain priority level.
The lower the priority of an adjacent E-UTRAN cell, the greater the
Reason
RFRQ for fast returning to this cell is required.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.58.34 Minimum RSRQ of EUtran cells for FastReturn to LTE

Full Name
Minimum RSRQ of EUtran cells for FastReturn to LTE
Abbreviated Name
EUtranQQUALMINFR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the minimum RSRQ of adjacent E-UTRAN

target cells for FastReturn to LTE.
the RSRQ reported by an MS, the BSC searches the cells
fulfilling the conditions that the difference between the RSRQ
and the EUtranQQUALMINFR value is greater than the
EUtranLowThreshQFR value of the cell's priority in the descending
EUtranQQUALMINFR value of the priority is less than the RSRQ.
Instance
Cell
Related FG
2-2692
SJ-20140527134815-013|2015-03-10(R1.1)
0..15
(0= -34dB, 1= -32dB, 2= -30dB, , 14= -6dB, 15= -4dB.
(-34+n*2))
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
Raise this value a bit if it is expected to perform FastReturn only
when the EUTRAN neighbor cell has a quite high RSRQ. The same
value can be used for different priority levels.
It is easy and practical to select adjacent E-UTRAN cells for fast
Reason
returning with the parameter EUtranQQUALMINFR, which is set to 0.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.103/V6.30.103
N/A
2.59 BSC Um Soft Synchronous

Configuration(GUmsyn)
2.59.1 BSC Um Soft Synchronous Configuration ID
Full Name
BSC Um Soft Synchronous Configuration ID
Abbreviated Name
GUmsynId
2-2693
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
BSC Um Soft Synchronous Configuration(GUmsyn)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a BSC Um soft synchronization

configuration ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->BSC Um Soft Synchronous
Configuration
N/A
2-2694
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
UmSynSupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the BSC supports soft

synchronization over the Um interface.
Instance
BSC
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
GGsmCell.UmSynSupport
If Gumsyn.UmSynSupport is set to "Not Support", the corresponding
Parameters
cell-level switch can be configured to determine whether a cell

supports soft synchronization over the Um interface.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
When the soft synchronization feature is enabled, this parameter is
set to "Support" if all cells belonging to the BSC are expected to

participate in clock offset collection. Or else, this parameter is set to
"Not Support".
Reason
Change take effect
No
Access
Read/Write
2-2695
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.3 Soft Synchronous Measure Base AB

Full Name
Soft Synchronous Measure Base AB
Abbreviated Name
SynMeasBaseAB
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the AB-based strategy is used

for clock offset collection during soft synchronization over the Um
interface.
Instance
BSC
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The AB-based clock offset collection strategy is used during the
application of initial functions or a large-scale clock offset adjustment

period.
Reason
2-2696
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.4 Soft Synchronous Measure Base MTD

Full Name
Soft Synchronous Measure Base MTD
Abbreviated Name
SynMeasBaseMTD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether the MTD-based strategy is

used for clock offset collection during soft synchronization over the
Um interface.
Instance
BSC
Related FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2697
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
Yes
The MTD-based clock offset collection strategy is used during a
small-scale clock offset adjustment period.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.5 Soft Synchronous Measure Base AB Start Time(hour)

Full Name
Soft Synchronous Measure Base AB Start Time(hour)
Abbreviated Name
BaseABSynMeasSTh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the hour value in the start time of the
AB-based clock measurement for synchronization.
Instance
BSC
Related FG
0..23
Unit
N/A
Default Value
Related Parameters
BaseABSynMeasSTm
2-2698
SJ-20140527134815-013|2015-03-10(R1.1)
The start time of AB-based clock measurement is represented
Parameters
by two parameters: BaseABSynMeasSTh (hour) and

BaseABSynMeasSTm (minute).
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to start the AB-based clock measurement at a
time at night when the traffic is low. The clock measurement period
cannot overlap the clock adjustment period.
By default, AB-based clock measurement starts at 1: 00 A.M.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.6 Soft Synchronous Measure Base AB Start Time(minute)

Full Name
Soft Synchronous Measure Base AB Start Time(minute)
Abbreviated Name
BaseABSynMeasSTm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minute value in the start time of the
AB-based clock measurement for synchronization.
Instance
BSC
Related FG

2-2699
SJ-20140527134815-013|2015-03-10(R1.1)
0..59
Unit
N/A
Default Value
Related Parameters
BaseABSynMeasSTh
The start time of AB-based clock measurement is represented
Parameters
by two parameters: BaseABSynMeasSTh (hour) and

BaseABSynMeasSTm (minute).
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to start the AB-based clock measurement at a
By default, AB-based clock measurement starts at 1: 00 A.M.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.7 Soft Synchronous Measure Base AB Duration

Full Name
Soft Synchronous Measure Base AB Duration
Abbreviated Name
BaseABSynMeasDur
Managed Object

3GPP Name
N/A
2-2700
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates the duration of AB-based clock

measurement in the unit of minutes.
Instance
BSC
Related FG
0..120
Unit
Min
Default Value
30
Related Parameters
BaseABSynMeasSTh/BaseABSynMeasSTm
The duration refers to the period starting from the time when the
Parameters
AB-based measurement starts.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default duration (30 minutes) is recommended. The clock
measurement period cannot overlap the clock adjustment period.
By default, an AB-based clock measurement lasts 30 minutes.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.8 Soft Synchronous Clock Adjust Start Time(hour)

Full Name
Soft Synchronous Clock Adjust Start Time(hour)
Abbreviated Name
SynFrameAdjuestSTh
2-2701
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the hour value in the start time of clock
adjustment for synchronization.
Instance
BSC
Related FG
0..23
Unit
N/A
Default Value
Related Parameters
SynFrameAdjuestSTm
The start time of clock adjustment is represented by two parameters:
Parameters
SynFrameAdjuestSTh (hour) and SynFrameAdjuestSTm (minute).
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The start time of clock adjustment must be later than AB-based
clock measurement and MTD-based clock measurement. It is

recommended to start the clock adjustment at a time at night when
the traffic is low.
By default, clock adjustment starts at 3: 00 A.M.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2-2702
SJ-20140527134815-013|2015-03-10(R1.1)
2.59.9 Soft Synchronous Clock Adjust Start Time(minute)

Full Name
Soft Synchronous Clock Adjust Start Time(minute)
Abbreviated Name
SynFrameAdjuestSTm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minute value in the start time of clock
adjustment for synchronization.
Instance
BSC
Related FG
0..59
Unit
N/A
Default Value
Related Parameters
SynFrameAdjuestSTh
The start time of clock adjustment is represented by two parameters:
Parameters
SynFrameAdjuestSTh (hour) and SynFrameAdjuestSTm (minute).
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The start time of clock adjustment must be later than AB-based
clock measurement and MTD-based clock measurement. It is

recommended to start the clock adjustment at a time at night when
the traffic is low.
By default, clock adjustment starts at 3: 00 A.M.
Reason
Change take effect
No
Access
Read/Write
2-2703
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.10 Soft Synchronous Clock Adjust Duration(minute)

Full Name
Soft Synchronous Clock Adjust Duration(minute)
Abbreviated Name
SynFrameAdjustDur
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the duration of clock adjustment in the

unit of minutes.
Instance
BSC
Related FG
0..120
Unit
N/A
Default Value
30
Related Parameters
SynFrameAdjuestSTh/SynFrameAdjuestSTm
Parameters
clock adjustment starts.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
adjustment period cannot overlap the clock measurement period.
By default, clock adjustment lasts 30 minutes.
Reason
Change take effect
No
2-2704
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.11 Soft Synchronous Measure Base MTD Start Time(hour)

Full Name
Soft Synchronous Measure Base MTD Start Time(hour)
Abbreviated Name
BaseMTDSynMeasSTh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the hour value in the start time of the
MTD-based clock measurement for synchronization.
Instance
BSC
Related FG
0..23
Unit
N/A
Default Value
Related Parameters
BaseMTDSynMeasSTm
The start time of MTD-based clock measurement is represented
Parameters
by two parameters: BaseMTDSynMeasSTh (hour) and

BaseMTDSynMeasSTm (minute).
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2705
SJ-20140527134815-013|2015-03-10(R1.1)
It is recommended to start the MTD-based clock measurement at a
By default, MTD-based clock measurement starts at 2: 00 A.M.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.12 Soft Synchronous Measure Base MTD Start Time(minute)

Full Name
Soft Synchronous Measure Base MTD Start Time(minute)
Abbreviated Name
BaseMTDSynMeasSTm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minute value in the start time of the
MTD-based clock measurement for synchronization.
Instance
BSC
Related FG
0..59
Unit
N/A
Default Value
Related Parameters
BaseMTDSynMeasSTh
The start time of MTD-based clock measurement is represented
Parameters
by two parameters: BaseMTDSynMeasSTh (hour) and

BaseMTDSynMeasSTm (minute).
2-2706
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to start the MTD-based clock measurement at a
By default, MTD-based clock measurement starts at 2: 00 A.M.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.13 Soft Synchronous Measure Base MTD Duration

Full Name
Soft Synchronous Measure Base MTD Duration
Abbreviated Name
BaseMTDSynMeasDur
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the duration of MTD-based clock

measurement in the unit of minutes.
Instance
BSC
Related FG
0..120
Unit
Min
2-2707
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
30
Related Parameters
BaseMTDSynMeasSTh/BaseMTDSynMeasSTm
Parameters
MTD-based measurement starts.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
measurement period cannot overlap the clock adjustment period.
By default, an MTD-based clock measurement lasts 30 minutes.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.14 Allow Detriment Adjust

Full Name
Allow Detriment Adjust
Abbreviated Name
DetrimentAdjust
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether a lossy adjustment is performed

to achieve the clock synchronization at a time when the remaining
time in a clock adjustment period is not enough for lossless
adjustment.
2-2708
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Lossy clock adjustment may cause call drops although clock
synchronization can be achieved quickly.
By default, lossy clock adjustment is not allowed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.15 Soft Synchronous Measure Base AB(Sunday)

Full Name
Soft Synchronous Measure Base AB(Sunday)
Abbreviated Name
BaseABSynMeasWeek0
Managed Object

3GPP Name
N/A
2-2709
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter determines whether AB-based clock measurement

is enabled on Sunday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
BaseABSynMeasWeek0~BaseABSynMeasWeek6
This parameter determines the actual start time of AB-based clock
Parameters
measurement with the parameters BaseABSynMeasSTh and

BaseABSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
AB-based clock measurement is recommended on days when the

traffic is low.
By default, AB-based clock measurement is enabled on Sunday.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.16 Soft Synchronous Measure Base AB(Monday)

2-2710
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Soft Synchronous Measure Base AB(Monday)
Abbreviated Name
BaseABSynMeasWeek1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Monday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

BaseABSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

traffic is low.
By default, AB-based clock measurement is enabled on Monday.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
2-2711
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.59.17 Soft Synchronous Measure Base AB(Tuesday)

Full Name
Soft Synchronous Measure Base AB(Tuesday)
Abbreviated Name
BaseABSynMeasWeek2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Tuesday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

BaseABSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

traffic is low.
By default, AB-based clock measurement is enabled on Tuesday.
Reason
Change take effect
No
2-2712
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.18 Soft Synchronous Measure Base AB(Wednesday)

Full Name
Soft Synchronous Measure Base AB(Wednesday)
Abbreviated Name
BaseABSynMeasWeek3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Wednesday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

BaseABSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

traffic is low.
2-2713
SJ-20140527134815-013|2015-03-10(R1.1)
By default, AB-based clock measurement is enabled on Wednesday.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.19 Soft Synchronous Measure Base AB(Thursday)

Full Name
Soft Synchronous Measure Base AB(Thursday)
Abbreviated Name
BaseABSynMeasWeek4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Thursday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

BaseABSynMeasSTm.
Value Type
long
2-2714
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No

traffic is low.
By default, AB-based clock measurement is enabled on Thursday.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.20 Soft Synchronous Measure Base AB(Friday)

Full Name
Soft Synchronous Measure Base AB(Friday)
Abbreviated Name
BaseABSynMeasWeek5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Friday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
2-2715
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
Parameters

BaseABSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

traffic is low.
By default, AB-based clock measurement is enabled on Friday.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.21 Soft Synchronous Measure Base AB(Saturday)

Full Name
Soft Synchronous Measure Base AB(Saturday)
Abbreviated Name
BaseABSynMeasWeek6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Saturday.
2-2716
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

BaseABSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

traffic is low.
By default, AB-based clock measurement is enabled on Saturday.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.22 Soft Synchronous Measure Base MTD(Sunday)

Full Name
Soft Synchronous Measure Base MTD(Sunday)
Abbreviated Name
BaseMTDSynMeasWeek0
Managed Object

2-2717
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether MTD-based clock measurement

is enabled on Sunday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
BaseMTDSynMeasWeek0~BaseMTDSynMeasWeek6
This parameter determines the actual start time of MTD-based clock
Parameters
measurement with the parameters BaseMTDSynMeasSTh and

BaseMTDSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
MTD-based clock measurement is recommended on days when

the traffic is low.
By default, MTD-based clock measurement is enabled on Sunday.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2-2718
SJ-20140527134815-013|2015-03-10(R1.1)
2.59.23 Soft Synchronous Measure Base MTD(Monday)

Full Name
Soft Synchronous Measure Base MTD(Monday)
Abbreviated Name
BaseMTDSynMeasWeek1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Monday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

BaseMTDSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

the traffic is low.
By default, MTD-based clock measurement is enabled on Monday.
Reason
Change take effect
No
Access
Read/Write
2-2719
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.24 Soft Synchronous Measure Base MTD(Tuesday)

Full Name
Soft Synchronous Measure Base MTD(Tuesday)
Abbreviated Name
BaseMTDSynMeasWeek2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Tuesday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

BaseMTDSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

the traffic is low.
By default, MTD-based clock measurement is enabled on Tuesday.
Reason
2-2720
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.25 Soft Synchronous Measure Base MTD(Wednesday)

Full Name
Soft Synchronous Measure Base MTD(Wednesday)
Abbreviated Name
BaseMTDSynMeasWeek3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Wednesday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

BaseMTDSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
2-2721
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No

the traffic is low.
By default, MTD-based clock measurement is enabled on
Reason
Wednesday.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.26 Soft Synchronous Measure Base MTD(Thursday)

Full Name
Soft Synchronous Measure Base MTD(Thursday)
Abbreviated Name
BaseMTDSynMeasWeek4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Thursday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
2-2722
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters

BaseMTDSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

the traffic is low.
By default, MTD-based clock measurement is enabled on Thursday.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.27 Soft Synchronous Measure Base MTD(Friday)

Full Name
Soft Synchronous Measure Base MTD(Friday)
Abbreviated Name
BaseMTDSynMeasWeek5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled on Friday.
Instance
BSC
Related FG

2-2723
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

BaseMTDSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

the traffic is low.
By default, MTD-based clock measurement is enabled on Friday.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.28 Soft Synchronous Measure Base MTD(Saturday)

Full Name
Soft Synchronous Measure Base MTD(Saturday)
Abbreviated Name
BaseMTDSynMeasWeek6
Managed Object

3GPP Name
N/A
2-2724
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

is enabled on Saturday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

BaseMTDSynMeasSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

the traffic is low.
By default, MTD-based clock measurement is enabled on Saturday.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.29 Soft Synchronous Clock Adjust(Sunday)

2-2725
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Soft Synchronous Clock Adjust(Sunday)
Abbreviated Name
SynFrameAdjustWeek0
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether clock adjustment for

synchronization is enabled on Sunday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
SynFrameAdjustWeek0~SynFrameAdjustWeek6
This parameter determines the actual start time of clock
Parameters
adjustment with the parameters SynFrameAdjuestSTh and

SynFrameAdjuestSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Clock adjustment is recommended on days when the traffic is low.
By default, clock adjustment for synchronization is enabled on
Reason
Sunday.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
2-2726
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.59.30 Soft Synchronous Clock Adjust(Monday)

Full Name
Soft Synchronous Clock Adjust(Monday)
Abbreviated Name
SynFrameAdjustWeek1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

synchronization is enabled on Monday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

SynFrameAdjuestSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Monday.
Change take effect
No
2-2727
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.31 Soft Synchronous Clock Adjust(Tuesday)

Full Name
Soft Synchronous Clock Adjust(Tuesday)
Abbreviated Name
SynFrameAdjustWeek2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

synchronization is enabled on Tuesday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

SynFrameAdjuestSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Tuesday.
2-2728
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.32 Soft Synchronous Clock Adjust(Wednesday)

Full Name
Soft Synchronous Clock Adjust(Wednesday)
Abbreviated Name
SynFrameAdjustWeek3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

synchronization is enabled on Wednesday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

SynFrameAdjuestSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
2-2729
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
Reason
Wednesday.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.33 Soft Synchronous Clock Adjust(Thursday)

Full Name
Soft Synchronous Clock Adjust(Thursday)
Abbreviated Name
SynFrameAdjustWeek4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

synchronization is enabled on Thursday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
2-2730
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters

SynFrameAdjuestSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Thursday.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.34 Soft Synchronous Clock Adjust(Friday)

Full Name
Soft Synchronous Clock Adjust(Friday)
Abbreviated Name
SynFrameAdjustWeek5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

synchronization is enabled on Friday.
Instance
BSC
Related FG
2-2731
SJ-20140527134815-013|2015-03-10(R1.1)
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

SynFrameAdjuestSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Friday.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.35 Soft Synchronous Clock Adjust(Saturday)

Full Name
Soft Synchronous Clock Adjust(Saturday)
Abbreviated Name
SynFrameAdjustWeek6
Managed Object

3GPP Name
N/A
2-2732
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

synchronization is enabled on Saturday.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
Parameters

SynFrameAdjuestSTm.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Saturday.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.36 Level Difference Threshold of Ncell and Serving Cell

Full Name
Level Difference Threshold of Ncell and Serving Cell

2-2733
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
LevelDiffThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of level difference between

a neighbor cell and the serving cell for clock measurement
switchover decision during soft synchronization. This neighbor
cell is considered as a candidate neighbor cell when P of N level
difference values between the neighbor cell and the serving cell
are smaller than this threshold.
Instance
BSC
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is adjusted to a larger value, measurement
switchover decision is more likely to be triggered during soft

synchronization. If this parameter is adjusted to a smaller value,
neighbor cells are less likely to be selected as candidate neighbor
cells for measurement switchover.
By default, the level difference is smaller than 5 dBm.
Reason
Change take effect
No
Access
Read/Write
2-2734
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.37 Synchronous Measure handover Start Threshold

Full Name
Synchronous Measure handover Start Threshold
Abbreviated Name
SynMeasHoStartThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the level threshold for measurement

switchover decision during soft synchronization. A measurement
switchover can be triggered only when the level in the serving cell
reaches this threshold.
Instance
BSC
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
25
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is adjusted to a smaller value, a measurement
switchover decision is more likely to be triggered during soft

synchronization.
By default, a measurement switch decision is triggered when the
Reason
level is higher than 25.

2-2735
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.38 Max Number Synchronous Measure TRX Per Site

Full Name
Max Number Synchronous Measure TRX Per Site
Abbreviated Name
SynMeasTrxMax
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of measurement

TRXs allowed in each BTS.
Instance
BSC
Related FG
0..108
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2736
SJ-20140527134815-013|2015-03-10(R1.1)
An increase of the allowed measurement TRXs in a BTS increases
the probability of clock measurement for soft synchronization but

has an impact on services.
By default, a maximum of three measurement TRXs are allowed in
Reason
each BTS.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.39 InterBSC Soft Synchronous Measure Support

Full Name
InterBSC Soft Synchronous Measure Support
Abbreviated Name
InterBSCSynMeasSupp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether inter-BSC clock measurement

for soft synchronization is supported.
Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2737
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This function is not supported by default.
By default, the inter-BSC clock measurement for soft synchronization
Reason
is not supported.
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.40 Whether to adjust frame number

Full Name
Whether to adjust frame number
Abbreviated Name
IsAdjustFrameNo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets whether to adjust the frame number in the

process of Um soft synchronization.
Instance
BSC
Related FG
0: No
1: Yes
Unit
N/A
2-2738
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter can be modified when necessary. It is applicable for
the AB mode, but not the MTD mode.
The default setting is not to adjust the frame number.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.59.41 Cycle adjustment

Full Name
Cycle adjustment
Abbreviated Name
IsCycleAdjust
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables/disables the cycle adjustment function in

the process of Um soft synchronization..
Instance
BSC
2-2739
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Not enabled generally.
The default setting is not to make periodic adjustment.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.101/V6.30.101
N/A
2.60 AMR Handover Control(GAmrHandoverControl)

2.60.1 Amr Handover Control ID
Full Name
Amr Handover Control ID
Abbreviated Name
GAmrHandoverControlId
Managed Object
AMR Handover Control(GAmrHandoverControl)
2-2740
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an AMR handover control ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->AMR Handover Control
N/A
2.60.2 Uplink receive quality for AMR-FR Threshold

Full Name
Uplink receive quality for AMR-FR Threshold
Abbreviated Name
HoUlQualThsForAmrFr
2-2741
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If P (number) among N (number) average AMR-FR uplink quality

values are higher than the HoUlQualThsForAmrFr value, the BSC
performs a handover on the MS.
Instance
Cell
Related FG

Conversion
8..70
Unit
N/A
Default Value
49
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally, the uplink Rx quality of above 49 is deemed as poor.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2742
SJ-20140527134815-013|2015-03-10(R1.1)
2.60.3 Uplink receive quality for AMR-FR Value N

Full Name
Uplink receive quality for AMR-FR Value N
Abbreviated Name
HoUlQualAmrFrN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If P (number) among N (number) average AMR-FR uplink receive

quality values are higher than the HoUlQualThsForAmrFr value, the
BSC performs a handover on the MS.
Instance
Cell
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

The setting is recommended for rapid and correct handover.
Reason
Change take effect
No
Access
Read/Write
2-2743
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.4 Uplink receive quality for AMR-FR Value P

Full Name
Uplink receive quality for AMR-FR Value P
Abbreviated Name
HoUlQualAmrFrP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

quality values are higher than the HoUlQualThsForAmrFr value, the
Instance
Cell
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
HoUlQualAmrFrN
HoUlQualAmrFrP <= HoUlQualAmrFrN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the value is large, the handover condition is strict and handover is
difficult.If the value is too large, call drops may increase. If the value
is too small, unnecessary handover may occur.
Reason
Change take effect
2-2744
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.5 Uplink receive quality for AMR-HR Threshold

Full Name
Uplink receive quality for AMR-HR Threshold
Abbreviated Name
HoUlQualThsForAmrHr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If P (number) among N (number) average AMR-HR uplink receive

quality values are higher than the HoUlQualThsForAmrHr value, the
Instance
Cell
Related FG

Conversion
8..70
Unit
N/A
Default Value
49
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2745
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.6 Uplink receive quality for AMR-HR Value N

Full Name
Uplink receive quality for AMR-HR Value N
Abbreviated Name
HoUlQualAmrHrN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
N/A
2-2746
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.7 Uplink receive quality for AMR-HR Value P

Full Name
Uplink receive quality for AMR-HR Value P
Abbreviated Name
HoUlQualAmrHrP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
2-2747
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
HoUlQualAmrHrN
HoUlQualAmrHrP <= HoUlQualAmrHrN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.8 Downlink receive quality for AMR-FR Threshold

Full Name
Downlink receive quality for AMR-FR Threshold
Abbreviated Name
HoDlQualThsForAmrFr
Managed Object

3GPP Name
N/A
2-2748
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
If P (number) among N (number) average AMR-FR downlink receive

quality values are higher than the HoDlQualThs value, the BSC
Instance
Cell
Related FG

Conversion
8..70
Unit
N/A
Default Value
49
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.9 Downlink receive quality for AMR-FR Value N

2-2749
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Downlink receive quality for AMR-FR Value N
Abbreviated Name
HoDlQualAmrFrN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2750
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.101/V6.30.101
N/A
2.60.10 Downlink receive quality for AMR-FR Value P

Full Name
Downlink receive quality for AMR-FR Value P
Abbreviated Name
HoDlQualAmrFrP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Related FG
Cell
Conversion
1..20
Unit
N/A
Default Value
Related Parameters
HoDlQualAmrFrN
HoDlQualAmrFrP <= HoDlQualAmrFrN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-2751
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.11 Downlink receive quality for AMR-HR Threshold

Full Name
Downlink receive quality for AMR-HR Threshold
Abbreviated Name
HoDlQualThsForAmrHr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If P (number) among N (number) average AMR-HR downlink receive

Instance
Cell
Related FG

Conversion
8..70
Unit
N/A
Default Value
49
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2752
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.12 Downlink receive quality for AMR-HR Value N

Full Name
Downlink receive quality for AMR-HR Value N
Abbreviated Name
HoDlQualAmrHrN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Related FG
Cell
Conversion
1..20
Unit
N/A
Default Value
Related Parameters
N/A
2-2753
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.13 Downlink receive quality for AMR-HR Value P

Full Name
Downlink receive quality for AMR-HR Value P
Abbreviated Name
HoDlQualAmrHrP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
2-2754
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
HoDlQualAmrHrN
HoDlQualAmrHrP <= HoDlQualAmrHrN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.14 Uplink receive level for AMR-FR Threshold

Full Name
Uplink receive level for AMR-FR Threshold
Abbreviated Name
HoUlLevThsForAmrFr
Managed Object

3GPP Name
N/A
2-2755
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

level values are lower than the HoUlLevThsForAmrFr value, the
Instance
Cell
Related FG

Conversion
0..63
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher the threshold is, the more easily a handover is triggered.
Call drops may increase if the value is too small. Handovers will
happen too frequently if the value is too big.
Reason
good and bad level.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.15 Uplink receive level for AMR-FR Value N

Full Name
Uplink receive level for AMR-FR Value N

2-2756
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
HoUlLevAmrFrN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Related FG
Cell
Conversion
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
2-2757
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.60.16 Uplink receive level for AMR-FR Value P

Full Name
Uplink receive level for AMR-FR Value P
Abbreviated Name
HoUlLevAmrFrP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
HoUlLevAmrFrN
HoUlLevAmrFrP <= HoUlLevAmrFrN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
2-2758
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.17 Uplink receive level for AMR-HR Threshold

Full Name
Uplink receive level for AMR-HR Threshold
Abbreviated Name
HoUlLevThsForAmrHr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Conversion
0..63
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2759
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
good and bad level.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.18 Uplink receive level for AMR-HR Value N

Full Name
Uplink receive level for AMR-HR Value N
Abbreviated Name
HoUlLevAmrHrN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-2760
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.19 Uplink receive level for AMR-HR Value P

Full Name
Uplink receive level for AMR-HR Value P
Abbreviated Name
HoUlLevAmrHrP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Conversion
1..20
Unit
N/A
2-2761
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
HoUlLevAmrHrN
HoUlLevAmrHrP <= HoUlLevAmrHrN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.20 Downlink receive level for AMR-FR Threshold

Full Name
Downlink receive level for AMR-FR Threshold
Abbreviated Name
HoDlLevThsForAmrFr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

level values are lower than the HoDlLevThsForAmrFr value, the
2-2762
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG

Conversion
0..63
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
good and bad level.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.21 Downlink receive level for AMR-FR Value N

Full Name
Downlink receive level for AMR-FR Value N
Abbreviated Name
HoDlLevAmrFrN
Managed Object

2-2763
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2764
SJ-20140527134815-013|2015-03-10(R1.1)
2.60.22 Downlink receive level for AMR-FR Value P

Full Name
Downlink receive level for AMR-FR Value P
Abbreviated Name
HoDlLevAmrFrP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Related FG
Cell
Conversion
1..20
Unit
N/A
Default Value
Related Parameters
HoDlLevThsForAmrFrN
HoDlLevAmrFrP <= HoDlLevAmrFrN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
2-2765
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.23 Downlink receive level for AMR-HR Threshold

Full Name
Downlink receive level for AMR-HR Threshold
Abbreviated Name
HoDlLevThsForAmrHr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Conversion
0..63
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
good and bad level.
Change take effect
2-2766
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.24 Downlink receive level for AMR-HR Value N

Full Name
Downlink receive level for AMR-HR Value N
Abbreviated Name
HoDlLevAmrHrN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2767
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.60.25 Downlink receive level for AMR-HR Value P

Full Name
Downlink receive level for AMR-HR Value P
Abbreviated Name
HoDlLevAmrHrP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Conversion
1..20
Unit
N/A
Default Value
Related Parameters
HoDlLevAmrHrN
2-2768
SJ-20140527134815-013|2015-03-10(R1.1)
HoDlLevAmrHrP <= HoDlLevAmrHrN
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61 FH Handover Control(GFhHandoverControl)

2.61.1 Support handover from HR to FR due to low load
Full Name
Support handover from HR to FR due to low load
Abbreviated Name
HRTFRHOSupport2
Managed Object
FH Handover Control(GFhHandoverControl)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the ystem enables/disables the

load-based HR-FR handover function (including HR (v1) ->FR and
HR (V3)->FR handovers).
2-2769
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This switch can be turned On to improve call quality when the cell
load falls.
This function is usually not enabled for cells.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Information Configuration->FH Handover Control
V6.50.101/V6.30.101
N/A
2.61.2 If support intra-handover from FR to HR due to high load

Full Name
If support intra-handover from FR to HR due to high load
Abbreviated Name
frTHrHoSupport
Managed Object
3GPP Name
N/A
2-2770
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter indicates whether to support an FR-to-HR handover

based on load. When the load of a cell increases, an FR-to-HR
handover can be initiated to improve the utilization of the radio
channel.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Turn on this switch when handover from FR to HR is required in the
cell. This function can improve the utilization of the radio channel
when the cell load increases.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.61.3 If support intra-handover from HR to FR due to bad quality

2-2771
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
If support intra-handover from HR to FR due to bad quality
Abbreviated Name
hrTFrHoSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to support an HR-to-FR handover

based on quality. When HR voice quality is poor, an HR-to-FR
handover can be initiated to improve the voice quality.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Turn on this switch when handovers from HR to FR are required in
the cell. When the HR voice quality is poor, a handover to the FR

channel can be used to improve the voice quality.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2772
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.61.4 The load of HO from FR to HR(V3)

Full Name
The load of HO from FR to HR(V3)
Abbreviated Name
frtoamrhrholoadthr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the load of a cell reaches a certain level, FR->HR(V3)

The parameter value should be smaller than or equal to
FrToHrHoLoadThr.
in the cell * 100 / (number of busy channels in the cell + number of
idle channels)
Instance
Cell
Related FG
20..100
Unit
Default Value
80
Related Parameters
FRTHRHOSupport
FrToHrHoLoadThr
Parameters
turned on.
FrToHrHoLoadThr>=FrToAmrHrHoLoadThr
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2773
SJ-20140527134815-013|2015-03-10(R1.1)
turned on in the cell.

The greater the parameter is, the higher the cell load required to
originate FR->HR(V3) handover, and the less the opportunity to
perform a handover is.
The smaller the parameter is, the lower the cell load required to
originate FR->HR(V3) handover, and the more the opportunity to
If the value is too small, the number of handovers in the cell
increases.
When the load of the cell reaches 80%, the cell is considered to be
Reason
busy and FR-to-HR(V3) handover can be performed to improve

the system capacity.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.61.5 The load of HO from FR to HR(V1)

Full Name
The load of HO from FR to HR(V1)
Abbreviated Name
frtohrholoadthr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2774
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When the load of a cell reaches a certain level, FR->HR(V1)

FrToAmrHrHoLoadThr.
in the cell * 100 / (number of busy channels in the cell + number of
idle channels)
Instance
Cell
Related FG
20..100
Unit
Default Value
90
Related Parameters
FRTHRHOSupport
FrToAmrHrHoLoadThr
Parameters
turned on.
FrToHrHoLoadThr>=FrToAmrHrHoLoadThr
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
turned on in the cell.

The greater the parameter is, the higher the cell load required to
originate FR->HR(V1) handover, and the less the opportunity to
The smaller the parameter is, the lower the cell load required to
originate FR->HR(V1) handover, and the more the opportunity to
When the load of the cell reaches 90%, the cell is considered to be
Reason
busy and FR-to-HR(V1) handover can be performed to improve

the system capacity.
Change take effect
No
2-2775
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.61.6 The uplink quality of FR to HR load HO

Full Name
The uplink quality of FR to HR load HO
Abbreviated Name
FrLoadHoUlQuaThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the load of a cell reaches a certain level, FR->HR handover

needs to be initiated to obtain more channel resources and improve
the system capacity. However, the quality of selected FR calls must
meet a certain requirement. This parameter specifies the quality
threshold when the system triggers a handover from FR to HR.
The parameter value should be smaller than HrHoQuaThr and
AmrHrHoQuaThr.
Instance
Cell
Related FG
0..69
Unit
N/A
Default Value
10
Related Parameters
FRTHRHOSupport
AmrHrHoQuaThr
HrHoQuaThr
Parameters
turned on.
HrHoQuaThr>FrHoQuaThr
AmrHrHoQuaThr>FrHoQuaThr
Value Type
long
Parameter Type
Negotiation With CN
No
2-2776
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
The smaller this threshold is, it means that higher quality is required.
A certain level of voice quality should be ensured after an FR-to-HR
Reason
handover is finished. Therefore, the parameter should be set to

a small value.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.7 The downlink quality of FR to HR load HO

Full Name
The downlink quality of FR to HR load HO
Abbreviated Name
FrLoadHoDlQuaThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

the system capacity. However, the downlink quality of selected FR
calls must meet a certain requirement. This parameter specifies the
downlink quality threshold when the system triggers a handover
from FR to HR.
Instance
Cell
Related FG
0..69
Unit
N/A
Default Value
10
2-2777
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The smaller this threshold is, it means that higher quality is required.
A certain level of voice quality should be ensured after an FR-HR
Reason
handover is finished. Therefore, the parameter should be set to

a small value.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.8 The uplink level of FR to HR load HO

Full Name
The uplink level of FR to HR load HO
Abbreviated Name
FrLoadHoUlLevThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2778
SJ-20140527134815-013|2015-03-10(R1.1)
Description

the system capacity. However, the uplink level of selected FR calls
must meet a certain requirement. This parameter specifies the
uplink level threshold when the system triggers a handover from
FR to HR.
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To be set in light of past setting experience.
A larger parameter value indicates higher level required for

candidate users, which makes handover more difficult.
A smaller parameter value indicates lower level required for
candidate users, which makes post-HO call drops more possible.
A handover failure or call drop caused by poor uplink level should
Reason
be avoided during an FR-HR handover.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2779
SJ-20140527134815-013|2015-03-10(R1.1)
2.61.9 The downlink level of FR to HR load HO

Full Name
The downlink level of FR to HR load HO
Abbreviated Name
FrLoadHoDlLevThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

the system capacity. However, the downlink level of selected FR
calls must meet a certain requirement. This parameter specifies
the downlink level threshold when the system triggers a handover
from FR to HR.
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

A handover failure or call drop caused by poor downlink level should
Reason
be avoided during an FR-HR handover.
Change take effect
No
2-2780
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.10 The uplink quality low threshold of HR(V1) to FR quality HO

Full Name
The uplink quality low threshold of HR(V1) to FR quality HO
Abbreviated Name
HrQualHoUlQuaLowThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the calls of an HR do not meet handover conditions but their

voice quality is too bad, the system triggers an intra-cell handover
from HR (V1) to FR, to improve the voice quality. This parameter
indicates the quality threshold when the system triggers an intra-cell
handover from HR (V1) to FR.
The parameter value should be larger than FrHoQuaThr.
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
39
Related Parameters
HRTFRHOSupport
FrHoQuaThr
This parameter takes effect when the HRTFRHOSupport switch is
Parameters
turned on.
HrHoQuaThr>=FrHoQuaThr
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2781
SJ-20140527134815-013|2015-03-10(R1.1)
The greater the HrHoQuaThr value is, the quality error bit rate of
HR service is more tolerated and the less probable to initiate an

HR(V1)->FR quality handover.
The smaller the HrHoQuaThr value is, the quality error bit rate of
HR service is less tolerated and the more probable to initiate an
HR(V1)->FR quality handover.
It is acceptable when the voice quality is higher than the threshold.
Reason
If the voice quality is lower than the threshold, a handover should be

initiated to improve user experience.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.61.11 The uplink quality High threshold of HR(V1) to FR quality

HO
Full Name
The uplink quality High threshold of HR(V1) to FR quality HO
Abbreviated Name
HrQualHoUlQuaHighThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

from HR (V1) to FR, so as to improve the voice quality. This
parameter indicates the uplink quality upper threshold when the
system triggers an intra-cell handover from HR (V1) to FR.
Instance
Cell
Related FG
8..70
2-2782
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
46
Related Parameters
HRTFRHOSupport
HrQualHoUlQuaLowThr
This parameter takes effect only when the HRTFRHOSupport switch
Parameters
is turned On.
HrQualHoUlQuaHighThr>HrQualHoUlQuaLowThr
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher this threshold is, it means that lower quality is required.
A call drop is quite possible during a handover if the threshold is too

high. It be set in light of past setting experience.
A call drop is quite possible during a handover if the voice quality
Reason
is too bad.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.12 The downlink quality low threshold of HR(V1) to FR quality

HO
Full Name
The downlink quality low threshold of HR(V1) to FR quality HO
Abbreviated Name
HrQualHoDlQuaLowThr
Managed Object
3GPP Name
N/A
2-2783
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

parameter indicates the downlink quality lower threshold when the
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
39
Related Parameters
HRTFRHOSupport
HrQualHoDlQuaHighThr
Parameters
is turned On.
HrQualHoDlQuaHighThr>HrQualHoDlQuaLowThr
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher this threshold is, it means that the quality error bit rate
of HR service is more tolerated.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2784
SJ-20140527134815-013|2015-03-10(R1.1)
2.61.13 The downlink quality high threshold of HR(V1) to FR quality

HO
Full Name
The downlink quality high threshold of HR(V1) to FR quality HO
Abbreviated Name
HrQualHoDlQuaHighThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

parameter indicates the downlink quality upper threshold when the
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
46
Related Parameters
HRTFRHOSupport
HrQualHoDlQuaLowThr
Parameters
is turned On.
HrQualHoDlQuaHighThr>HrQualHoDlQuaLowThr
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
is too bad.
Change take effect
No
2-2785
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.14 The uplink receive quality low threshold of HR(V3) to FR

quality HO
Full Name
The uplink receive quality low threshold of HR(V3) to FR quality HO
Abbreviated Name
AmrHrQualHoUlQuaLowThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the calls of an AMR HR do not meet handover conditions

but their voice quality is too bad, the system triggers an intra-cell
handover from HR (V3) to FR, to improve the voice quality. This
parameter indicates the quality threshold when the system triggers
an intra-cell handover from HR (V3) to FR.
The parameter value should be larger than FrHoQuaThr.
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
39
Related Parameters
HRTFRHOSupport
FrHoQuaThr
This parameter takes effect when the HRTFRHOSupport switch is
Parameters
turned on.
AmrHrHoQuaThr>FrHoQuaThr
Value Type
long
Parameter Type
Negotiation With CN
No
2-2786
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
The greater the AmrHrHoQuaThr value is, the quality error bit rate of
AMR HR service is more tolerated and the less probable to initiate

an HR(V3)->FR quality handover.
The smaller the AmrHrHoQuaThr value is, the quality error bit rate
of AMR HR service is less tolerated and the more probable to initiate
an HR(V3)->FR quality handover.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.61.15 The uplink receive quality high threshold of HR(V3) to FR

quality HO
Full Name
The uplink receive quality high threshold of HR(V3) to FR quality HO
Abbreviated Name
AmrHrQualHoUlQuaHighThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

handover from HR (V3) to FR, so as to improve the voice quality.
This parameter indicates the uplink quality upper threshold when the
Instance
Cell
Related FG

2-2787
SJ-20140527134815-013|2015-03-10(R1.1)
8..70
Unit
N/A
Default Value
46
Related Parameters
HRTFRHOSupport
AmrHrQHoUlQLowThr
Parameters
is turned On.
AmrHrQHoUlQHighThr>AmrHrQHoUlQLowThr
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
is too bad.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.16 The downlink receive quality low threshold of HR(V3) to

FR quality HO
Full Name
The downlink receive quality low threshold of HR(V3) to FR quality

HO
Abbreviated Name
AmrHrQualHoDlQuaLowThr
Managed Object
2-2788
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description

This parameter indicates the downlink quality lower threshold when
the system triggers an intra-cell handover from HR (V3) to FR.
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
39
Related Parameters
HRTFRHOSupport
AmrHrQHoDlQHighThr
Parameters
is turned On.
AmrHrQHoDlQHighThr>AmrHrQHoDlQLowThr
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The higher this threshold is, it means that the quality error bit rate
of HR service is more tolerated.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2789
SJ-20140527134815-013|2015-03-10(R1.1)
2.61.17 The downlink receive quality high threshold of HR(V3) to

FR quality HO
Full Name
The downlink receive quality high threshold of HR(V3) to FR quality

HO
Abbreviated Name
AmrHrQualHoDlQuaHighThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

This parameter indicates the downlink quality upper threshold when
the system triggers an intra-cell handover from HR (V3) to FR.
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
46
Related Parameters
HRTFRHOSupport
AmrHrQHoDlQLowThr
Parameters
is turned On.
AmrHrQHoDlQHighThr>AmrHrQHoDlQLowThr
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
is too bad.
Change take effect
No
2-2790
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.18 The uplink level of HR to FR quality HO

Full Name
The uplink level of HR to FR quality HO
Abbreviated Name
HrQualHoUlLevThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the calls of an HR or AMR HR do not meet handover

conditions but their voice quality is too bad, the system triggers
an intra-cell handover from HR to FR, so as to improve the voice
quality. This parameter indicates the uplink level threshold when the
system triggers an intra-cell handover from HR to FR.
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2791
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
be avoided during an HR-FR handover.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.19 The downlink level of HR to FR quality HO

Full Name
The downlink level of HR to FR quality HO
Abbreviated Name
HrQualHoDlLevThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the calls of an HR or AMR HR do not meet handover

conditions but their voice quality is too bad, the system triggers
an intra-cell handover from HR to FR, so as to improve the voice
quality. This parameter indicates the downlink level threshold when
the system triggers an intra-cell handover from HR to FR.
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
20
2-2792
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.20 P value of load and quality handover

Full Name
P value of load and quality handover
Abbreviated Name
loadandqualhop
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2793
SJ-20140527134815-013|2015-03-10(R1.1)
Description
For the handovers between FR and HR caused by load and quality

changes, if P out of the N values (the latest average N values of
signal quality) meet the threshold requirements, a handover can
be initiated.
LoadAndQualHoN.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
FRThrHoSupport,
LoadAndQualHoN
This parameter takes effect when the load-based handover from FR
Parameters
to HR switch is turned on.

LoadAndQualHoN.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

easily.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2794
SJ-20140527134815-013|2015-03-10(R1.1)
2.61.21 N value of load and quality handover

Full Name
N value of load and quality handover
Abbreviated Name
loadandqualhon
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
For the handovers between FR and HR caused by load and quality

changes, if P out of the N values (the latest average N values of
signal quality) meet the threshold requirements, a handover can
be initiated.
LoadAndQualHoP.
Instance
Cell
Related FG
1..20
Unit
N/A
Default Value
Related Parameters
FRThrHoSupport,
LoadAndQualHoP
This parameter takes effect when the load-based handover from FR
Parameters
to HR switch is turned on.

LoadAndQualHoP.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
accurate.
Reason
Change take effect
2-2795
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

N/A
2.61.22 The load of HO from HR(V1) to FR

Full Name
The load of HO from HR(V1) to FR
Abbreviated Name
HrToFrHoLoadThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the load on a cell decreases to a certain point, an HR(V3)->FR

handover is triggered to improve voice quality. This parameter
specifies the load threshold for a cell to trigger an HR(V3)->FR
handover. If the load is lower than this threshold, priority is first
given to HR(1)->FR handover, and then to HR(V3)->FR handover.
Instance
Cell
Related FG
0..100
Unit
Default Value
30
Related Parameters
AmrHrToFrHoLoadThr
The same cell, AmrHRThs >HrToFrHoLoadThr>= Am-
Parameters
rHrToFrHoLoadThr,
FrToHrHoLoadThr> HrToFrHoLoadThr
Value Type
long
Parameter Type
Negotiation With CN
No
2-2796
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
The FR mode can be applied to increase the channel load, which
may reach the threshold of the dynamic HR. For this reason, a
balance should be reached between the two thresholds so that
Reason
load. For example, if the load on a channel is lower than 30, the FR
mode can be applied to improve user experience.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.23 The load of HO from HR(V3) to FR

Full Name
The load of HO from HR(V3) to FR
Abbreviated Name
AmrHrToFrHoLoadThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the load on a cell decreases to a certain point, an HR(V3)->FR

handover is triggered to improve voice quality. This parameter
specifies the load threshold for a cell to trigger an HR(V3)->FR
handover.
Instance
Cell
Related FG
0..100
Unit
2-2797
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
20
Related Parameters
HrToFrHoLoadThr
The same cell, AmrHRThs >HrToFrHoLoadThr>= Am-
Parameters
rHrToFrHoLoadThr,
FrToAmrHrHoLoadThr> AmrHrToFrHoLoadThr
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The AMR FR mode can be applied to increase the channel load,
which may reach the threshold of the dynamic HR. For this reason,
a balance should be reached between the two thresholds so that
Reason
load. For example, if the load on a channel is lower than 20, the
AMR FR mode can be applied to improve user experience.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.24 The uplink quality of HR to FR load HO

Full Name
The uplink quality of HR to FR load HO
Abbreviated Name
HrLoadHoUlQuaThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2798
SJ-20140527134815-013|2015-03-10(R1.1)
Description
When cell load decreases to a certain limit, the system triggers

a handover from HR to FR, so as to improve the voice quality.
However, the quality of selected HR calls must meet a certain
requirement. This parameter indicates the uplink quality threshold
when the system triggers a handover from HR to FR.
Instance
Cell
Related FG
0..69
Unit
N/A
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
is too bad.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.25 The downlink quality of HR to FR load HO

Full Name
The downlink quality of HR to FR load HO

2-2799
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
HrLoadHoDlQuaThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

requirement. This parameter indicates the downlink quality threshold
Instance
Cell
Related FG
0..69
Unit
N/A
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
is too bad.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2800
SJ-20140527134815-013|2015-03-10(R1.1)
2.61.26 The uplink level of HR to FR load HO

Full Name
The uplink level of HR to FR load HO
Abbreviated Name
HrLoadHoUlLevThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

requirement. This parameter indicates the uplink level threshold
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
2-2801
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.61.27 The downlink level of HR to FR load HO

Full Name
The downlink level of HR to FR load HO
Abbreviated Name
HrLoadHoDlLevThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

requirement. This parameter indicates the downlink level threshold
Instance
Cell
Related FG
0..63: (-110dbm..-47dbm),step 1
Unit
dBm
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2802
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2.62 Power Optimize(GPwOptimize)

2.62.1 Power Optimize ID
Full Name
Power Optimize ID
Abbreviated Name
GPwOptimizeId
Managed Object
Power Optimize(GPwOptimize)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a power optimization ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-2803
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Power Optimize
N/A
2.62.2 Assignment UpLink Power Optimize with Quality

Full Name
Assignment UpLink Power Optimize with Quality
Abbreviated Name
AssUpPwrCtrl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This is the switch for quality-based uplink power optimization during

assignment.
Instance
Cell
Related FG
ZGO-04-02-025 Power Optimization After Access
0: No
1: Yes
2-2804
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
PwrOptAssIntraHoUl
This function is valid only when the "Assignment and Intra-cell
Parameters
Handover Uplink Power Optimize" switch is on.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
By default, it is enabled because the assigned uplink power
Reason
optimization is controlled by the "Assignment and Intra-cell

Handover Uplink Power Optimize" switch. This function is valid only
when the switch is on. To facilitate field operations, this function is
enabled by default.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.62.3 Assignment DownLink Power Optimize with Quality

Full Name
Assignment DownLink Power Optimize with Quality
Abbreviated Name
AssDnPwrCtrl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2805
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This is the switch for quality-based downlink power optimization

during assignment.
Instance
Cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
PwrOptAssIntraHoDl
This function is valid only when the "Assignment and Intra-cell
Parameters
Handover Downlink Power Optimize" switch is on.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
By default, it is enabled because the assigned downlink power
Reason
optimization is controlled by the "Assignment and Intra-cell

Handover Downlink Power Optimize" switch. This function is valid
only when the switch is on. To facilitate field operations, this function
is enabled by default.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.62.4 Quality threshold of Assignment UpLink Power Optimize

Full Name
Quality threshold of Assignment UpLink Power Optimize

2-2806
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
AssUpPwrQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quality threshold for uplink power

optimization during assignment.
Instance
Cell
Related FG
0..70
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. If PwrOptAssIntraHoUl is
enabled and the assignment success rate is affected, this value can
be lowered and in this case, the uplink power optimization will not
be performed when the RQ rises above the threshold.
Usually, the RQ is deemed as good and power optimization can
Reason
be made when the quality is smaller than 30. Otherwise power

optimization can be omitted and the maximum Tx power is used.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A
2-2807
SJ-20140527134815-013|2015-03-10(R1.1)
2.62.5 Quality threshold of Assignment DownLink Power Optimize

Full Name
Quality threshold of Assignment DownLink Power Optimize
Abbreviated Name
AssDnPwrQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quality threshold for downlink power

optimization during assignment.
Instance
Cell
Related FG
0..70
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. If PwrOptAssIntraHoDl is
enabled and the assignment success rate is affected, this value can
be lowered and in this case, the downlink power optimization will not
be performed when the RQ rises above the threshold.
Usually, the RQ is deemed as good and power optimization can
Reason
be made when the quality is smaller than 30. Otherwise power

optimization can be omitted and the maximum Tx power is used.
Change take effect
No
Access
Read/Write
2-2808
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.101/V6.30.101
N/A
2.62.6 UpLink Optimize Method for Assignment or Intracell

Handover
Full Name
UpLink Optimize Method for Assignment or Intracell Handover
Abbreviated Name
PwrOptAssIntraHoUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates which initial uplink power (maximum value

or a lower value calculated by an algorithm) is used during an
assignment procedure or intra-cell handover procedure. If the initial
uplink power does not use the maximum value, the entire network
interference can be reduced, and the MS power can be saved.
Instance
Cell
Related FG
0: No Optimize
1: Inherit Power of Previous Channel
2: Optimize According To Target Level
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2809
SJ-20140527134815-013|2015-03-10(R1.1)
To reduce interferences by optimizing the initial power, the original
power or optimized target power is used.

If power control has been done for the original channel, the original
power is used. If it is too late to do power control for the original
channel, target power optimization is performed.
The maximum power is used traditionally. However a lower power
Reason
value is used for power optimization.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.62.7 DownLink Optimize Method for Assignment or Intracell

Handover
Full Name
DownLink Optimize Method for Assignment or Intracell Handover
Abbreviated Name
PwrOptAssIntraHoDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates which initial downlink power (maximum

value or a lower value calculated by an algorithm) is used during an
assignment procedure or intra-cell handover procedure. If the initial
downlink power does not use the maximum value, the entire network
interference can be reduced, and the BTS power can be saved.
Instance
Cell
Related FG
0: No Optimize
1: Inherit Power of Previous Channel
2-2810
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To reduce interferences by optimizing the initial power, or to increase
the power admission success rate by implementing the dynamic

power sharing function, the original power or optimized target power
is used. If power control has been done for the original channel, the
original power is used. If it is too late to do power control for the
original channel, target power optimization is performed.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.62.8 UpLink Optimize Method for Intercell Handover

Full Name
UpLink Optimize Method for Intercell Handover
Abbreviated Name
PwrOptInterHoUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2811
SJ-20140527134815-013|2015-03-10(R1.1)
Description

inter-cell handover procedure.
If the initial uplink power does not use the maximum value, the
entire network interference can be reduced, and the MS power can
be saved.
Instance
Cell
Related FG
0: No Optimize
1: Inherit Power Before Handover
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To reduce interferences by optimizing the initial power, the original
power or optimized target power is used.

Both methods are usually used, and the operator determines which
one is used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2812
SJ-20140527134815-013|2015-03-10(R1.1)
2.62.9 DownLink Optimize Method for Intercell Handover

Full Name
DownLink Optimize Method for Intercell Handover
Abbreviated Name
PwrOptInterHoDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

inter-cell handover procedure.
If the initial downlink power does not use the maximum value, the
entire network interference can be reduced, and the BTS power
can be saved.
Instance
Cell
Related FG
0: No Optimize
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To reduce interferences by optimizing the initial power, or to increase
the power admission success rate by implementing the dynamic

power sharing function, the optimized target power is used.
Reason
Change take effect
No
2-2813
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

N/A
2.62.10 UpLink Optimize Method for Immediate Assignment

Full Name
UpLink Optimize Method for Immediate Assignment
Abbreviated Name
PwrOptImmAssUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

assignment handover procedure.
If the initial uplink power does not use the maximum value, the
entire network interference can be reduced, and the MS power can
be saved.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is generally set to "Off". To reduce interferences by
optimizing the initial power, this parameter is set to "On".

2-2814
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.62.11 DownLink Optimize Method for Immediate Assignment

Full Name
DownLink Optimize Method for Immediate Assignment
Abbreviated Name
PwrOptImmAssDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

assignment handover procedure.
If the initial downlink power does not use the maximum value, the
entire network interference can be reduced, and the BTS power
can be saved.
Instance
Cell
Related FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2815
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is generally set to "Off". To reduce interferences
by optimizing the initial power, or to increase the power admission

success rate by implementing the dynamic power sharing function,
this parameter is set to "On".
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.62.12 Uplink target level

Full Name
Uplink target level
Abbreviated Name
UlTargetLevel
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines the uplink target level for power

optimization. When the system uses the uplink target level for power
optimization, it is required to tune the initial transmission power of
the MS, so that the receiving level of the BTS reaches this value.
Instance
Cell
Related FG
0..63
2-2816
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
30
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
According to the signal level and quality distribution in the network,
this parameter is set to guarantee a high signal quality.

If this target level is too high, the power optimization effect is not
good. If this target level is too low, the MS may fails to access the
new channel.
-80 dBm is considered as a high uplink receiving level.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.62.13 Downlink target level

Full Name
Downlink target level
Abbreviated Name
DlTargetLevel
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2817
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter determines the downlink target level for power

optimization. When the system uses the downlink target level for
power optimization, it is required to tune the initial transmission
power of the BTS, so that the receiving level of the MS reaches
this value.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
35
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter is set to guarantee a high signal quality.

If this target level is too high, the power optimization effect is not
good. If this target level is too low, the MS may fails to access the
new channel.
-75 dBm is considered as a high downlink receiving level.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2-2818
SJ-20140527134815-013|2015-03-10(R1.1)
2.62.14 Low RSSI threshold

Full Name
Low RSSI threshold
Abbreviated Name
LowRssiThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the low RSSI threshold of power

optimization.
When an MS initially access the network, the BTS detects the RSSI
of the access burst on the RACH that carries a channel request
message, and reports the measured RSSI to the BSC.
Based on the measured RSSI and two thresholds LOWRSSITHS
and HIGHRSSITHS, the BSC controls the MS power as follows:
When RSSI < LOWRSSITHS, MSPower_Opt = MSTXPowerMax.
When LOWRSSITHS =< RSSI < HIGHRSSITHS, MSPower_Opt
= MSTXPowerMax-2dB.
When RSSI >= HIGHRSSITHS, MSPower_Opt = MSTXPowerMax4dB.
To maintain symmetry for the uplink and downlink, the downlink
power is optimized in the same way.
Because there is no MSPOWER parameter in an assignment
message, the uplink power cannot be specified. The BSC sends
the optimized MS power to the BTS through a channel activation
message, and the BTS sends the power to the MS through the
SACCH frame header. Therefore, the power optimization is delayed
a little.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
32
Related Parameters
HighRssiThs
R_BTS2.HighRssiThs>R_BTS2.LowRssiThs
Parameters
Value Type
long
Parameter Type
2-2819
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
this parameter is set to guarantee a high signal quality even the

downlink and uplink power is decreased by 2 dB.
There is only one burst on the RACH, and the measured signal level
of the RACH is not so accurate as that of dedication channels, so It
is recommended to set a higher value for this parameter.
-78 dBm is considered as a high receiving level on the RACH. In this
Reason
case, the MS power can be decreased by 2 dB.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.62.15 High RSSI Threshold

Full Name
High RSSI Threshold
Abbreviated Name
HighRssiThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2820
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the high RSSI threshold of power

optimization.
When an MS initially access the network, the BTS detects the RSSI
of the access burst on the RACH that carries a channel request
message, and reports the measured RSSI to the BSC.
Based on the measured RSSI and two thresholds LOWRSSITHS
and HIGHRSSITHS, the BSC controls the MS power as follows:
When RSSI < LOWRSSITHS, MSPower_Opt = MSTXPowerMax.
When LOWRSSITHS =< RSSI < HIGHRSSITHS, MSPower_Opt
= MSTXPowerMax-2dB.
When RSSI >= HIGHRSSITHS, MSPower_Opt = MSTXPowerMax4dB.
To maintain symmetry for the uplink and downlink, the downlink
power is optimized in the same way.
Because there is no MSPOWER parameter in an assignment
message, the uplink power cannot be specified. The BSC sends
the optimized MS power to the BTS through a channel activation
message, and the BTS sends the power to the MS through the
SACCH frame header. Therefore, the power optimization is delayed
a little.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
38
Related Parameters
LowRssiThs
R_BTS2.HighRssiThs>R_BTS2.LowRssiThs
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
this parameter is set to guarantee a high signal quality even the

downlink and uplink power is decreased by 4 dB.
There is only one burst on the RACH, and the measured signal level
of the RACH is not so accurate as that of dedication channels, so It
is recommended to set a higher value for this parameter.
-72 dBm is considered as a high receiving level on the RACH. In this
Reason
case, the MS power can be decreased by 4 dB.
2-2821
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.62.16 Ms power inherit threshold

Full Name
Ms power inherit threshold
Abbreviated Name
MsPwrInheritThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a threshold and is valid when the MS power

optimization function for non-rescue handovers is enabled. When
the BSC sends a handover command to the MS for a non-rescue
handover, such as a PBGT handover, if the current level is higher
than the threshold indicated by this parameter, it means that the
target cell has higher signal level. In this case, the current transmit
power, instead of the maximum transmit power, should be used.
Instance
Cell
Related FG
0..63
Unit
N/A
Default Value
27
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-2822
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
If this parameter value is high, handover failures are not easy to
occur. If this parameter is low, the MS is more likely to use the

original power instead of the maximum power, which reduces
interferences and save power.
-83 dBm is considered as a signal level high enough for normal
Reason
traffic.
Change take effect
No
Access
Read/Write
OMC Access path

N/A
2.62.17 Downlink minimum level

Full Name
Downlink minimum level
Abbreviated Name
DlMinLevel
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum downlink level. If the

UseDlMinLevel switch is enabled during power sharing, the BSC
calculates the minimum downlink transmit power according to this
minimum downlink level and sends the calculated transmit power to
the SDR through a channel activation message. If the SDR fails to
activate a channel due to insufficient power, the SDR can activate
the channel with the minimum transmit power so that the ratio of
channel activation failures due to insufficient power can be reduced.
Instance
cell
Related FG
ZGO-04-01-007 Dynamic Power Sharing

2-2823
SJ-20140527134815-013|2015-03-10(R1.1)
0..63
Unit
N/A
Default Value
20
Related Parameters
DlTargetLevel
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the minimum level is higher, a good radio condition can be
maintained but the probability of channel activation failure due to

insufficient power increases. If the minimum level is lower, the
radio condition may be bad but the probability of channel activation
failure due to insufficient power decreases. After this parameter is
modified, network performance indicators must be observed.
A channel can operate properly when the downlink level is -90 dBm
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.202/V6.30.202
ADD
2.63 BSS Function AMR Configuration(GBssAmr)

2.63.1 BSC AMR Configuration ID
Full Name
BSC AMR Configuration ID
Abbreviated Name
GBssAmrId
2-2824
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object
BSS Function AMR Configuration(GBssAmr)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a BSC AMR configuration ID.
Instance
RNC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->BSS Function AMR Configuration
N/A

Full Name

2-2825
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
amrFullAcs1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The ACS is used by combining high and low rates in different
scenarios. If the radio signals in a cell are good, you can select a
higher rate. Otherwise, you can only select a lower rate.
The ACS includes 12.2, 7.4, 5.9, and 4.75 kbps that are
Reason
recommended by TS 28.062. These rates can be widely used by

combining high and low rates in different scenarios.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2826
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrFullAcs2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

2-2827
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFullAcs3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

the 5.9 kbps codec mode.
Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
2-2828
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFullAcs4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2829
SJ-20140527134815-013|2015-03-10(R1.1)
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFullAcs5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2830
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFullAcs6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
2-2831
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFullAcs7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
2-2832
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFullAcs8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2833
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrFrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrHalfAcs1
2-2834
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The ACS contains the 7.4, 5.9, and 4.75 rates that are recommended
Reason
by TS 28.062. These rates can be widely used by combining the

high and low rates in different scenarios.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2835
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrHalfAcs2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

2-2836
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrHalfAcs3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason

Change take effect
No
2-2837
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrHalfAcs4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2838
SJ-20140527134815-013|2015-03-10(R1.1)
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrHalfAcs5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
amrHrStartMode
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2839
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFrThresholds1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the CIR threshold for reducing the AMR
FR codec rate from 5.15 kbps.
Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
13
2-2840
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally this parameter needs no modification. If this parameter is
required to be modified, you should adjust it when the frame error

rate detected by the BTS is around 1%.
The default value consists of the carrier-to-interference ratios
Reason
required by different AMR rates when the FER is 1%.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2841
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrFrThresholds2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the CIR threshold for reducing the AMR FR
codec rate from 5.9 kbps. When the current rate on the FR channel
is 5.9 kbps, if the detected CIR is lower than this threshold, the AMR
FR codec rate is reduced.
Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
14
Related Parameters
amrFrThresholds1
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
2-2842
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFrThresholds3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
0..63
Unit
0.5dB
2-2843
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
15
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
2-2844
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
amrFrThresholds4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
17
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
2-2845
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFrThresholds5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2846
SJ-20140527134815-013|2015-03-10(R1.1)
Description
is 7.95 kbps, if the detected CIR is lower than this threshold, the
AMR FR codec rate is reduced.
Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
18
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
2-2847
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFrThresholds6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
20
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
2-2848
SJ-20140527134815-013|2015-03-10(R1.1)
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFrThresholds7
Managed Object

2-2849
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
23
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2850
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrHrThresholds1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies a CIR threshold for reducing the AMR HR

codec rate from 5.15kbps. When the current rate on the HR channel
AMR HR codec rate is reduced.
Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
18
2-2851
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No


Reason
The default value indicates the CIRs required by different AMR rates
when the FER is 1%. These CIRs are obtained through system
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2852
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrHrThresholds2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies a CIR threshold for reducing the HR AMR

HR codec rate is reduced.
Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
20
Related Parameters
amrHrThresholds1
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2853
SJ-20140527134815-013|2015-03-10(R1.1)


Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrHrThresholds3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
23
2-2854
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2855
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrHrThresholds4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
26
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2856
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrHrThresholds5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

AMR HR codec rate is reduced.
Instance
BSC
Related FG
0..63
Unit
0.5dB
Default Value
30
2-2857
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No


Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2858
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrFrHysteresis1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the CIR hysteresis for increasing the AMR
FR codec rate to 5.15 kbps. When the current rate on the FR
channel is lower than 5.15 kbps, if the detected CIR is higher than
a threshold (amrFrThresholds1+amrFrHysteresis1), the AMR FR
codec rate is increased to 5.15 kbps.
Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
2-2859
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFrHysteresis2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
FR codec rate to 5.9 kbps. When the current rate on the FR channel
is lower than 5.9 kbps, if the detected CIR is higher than a threshold
(amrFrThresholds2+amrFrHysteresis2), the AMR FR codec rate
is increased to 5.9 kbps.
Instance
BSC
Related FG

2-2860
SJ-20140527134815-013|2015-03-10(R1.1)
0..15
Unit
0.5dB
Default Value
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
2-2861
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFrHysteresis3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
(amrFrThresholds3+amrFrHysteresis3), the FR AMR codec rate
Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
2-2862
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFrHysteresis4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2863
SJ-20140527134815-013|2015-03-10(R1.1)
Description
(amrFrThresholds4+amrFrHysteresis4), the FR AMR codec rate
Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2864
SJ-20140527134815-013|2015-03-10(R1.1)
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFrHysteresis5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
a threshold (amrFrThresholds5+amrFrHysteresis5), the FR AMR
Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
2-2865
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis6
amrFrHysteresis7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
2-2866
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
amrFrHysteresis6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis7
2-2867
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrFrHysteresis7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2868
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2869
SJ-20140527134815-013|2015-03-10(R1.1)
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrHrHysteresis1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
HR codec rate to 5.15 kbps. When the current rate on the HR
a threshold (amrFrThresholds1+amrFrHysteresis1), the HR AMR
Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
2-2870
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
the rate adjusting frequency (through test analysis or AMR

monitoring tools). If the rate adjustment occurs too frequently, you
can increase this parameter.
Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2871
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrHrHysteresis2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the CIR hysteresis for increasing the

AMR HR codec rate to 5.9 kbps. When the current rate on the HR
Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2872
SJ-20140527134815-013|2015-03-10(R1.1)

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrHrHysteresis3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
2-2873
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis4
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2874
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrHrHysteresis4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis5
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2875
SJ-20140527134815-013|2015-03-10(R1.1)

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrHrHysteresis5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
HR codec rate to 7.95 kbps. When the current rate on the HR
Instance
BSC
Related FG
0..15
Unit
0.5dB
Default Value
2-2876
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
Parameters
,
amrHrHysteresis5
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2877
SJ-20140527134815-013|2015-03-10(R1.1)
2.63.39 Enable AMR FR noise control

Full Name
Enable AMR FR noise control
Abbreviated Name
amrFrNscb
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is disabled for the AMRFR speech version. The noise suppression
background noise.
Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally it is recommended to enable the noise suppression
function. When speech quality is deteriorated, you can enable this

parameter.
Reason
Change take effect
No
2-2878
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.63.40 AMR FR Initial codec mode

Full Name
AMR FR Initial codec mode
Abbreviated Name
amrFrIcm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

AMRFR speech version uses the codec mode specified by
follows:
initial codec mode.
Instance
BSC
Related FG
0: Initial codec mode

1: Start-mode codec
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2879
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
can select an initial codec mode specified in TS 45.009.
Set the initial codec mode as required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.63.41 AMR FR Start mode

Full Name
AMR FR Start mode
Abbreviated Name
amrFrStartMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the initial codec mode for the AMR FR
than the number of codec modes contained in the ACS. The values
are described as follows:
mode.
mode.
2-2880
SJ-20140527134815-013|2015-03-10(R1.1)
mode.
Instance
BSC
Related FG
1..4
Unit
N/A
Default Value
Related Parameters
amrFullAcs1
amrFullAcs2
amrFullAcs3
amrFullAcs4
amrFullAcs5
amrFullAcs6
amrFullAcs7
amrFullAcs8
amrFrIcm
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the cell has a better radio condition, you can select a higher initial
rate.
Using the lowest coding mode can ensure that comparatively good
Reason
voice quality can be provided in a poor radio condition.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2881
SJ-20140527134815-013|2015-03-10(R1.1)
2.63.42 Enable AMR HR noise control

Full Name
Enable AMR HR noise control
Abbreviated Name
amrHrNscb
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

is disabled for the AMRHR speech version. The noise suppression
background noise.
Instance
BSC
Related FG
0..1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally it is recommended to enable the noise suppression
function. When speech quality is deteriorated, you can enable this

parameter.
Reason
Change take effect
No
2-2882
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.63.43 AMR HR Initial codec mode

Full Name
AMR HR Initial codec mode
Abbreviated Name
amrHrIcm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

AMRHR speech version uses the codec mode specified by
follows:
initial codec mode.
Instance
BSC
Related FG
0: Initial codec mode

1: Start-mode codec
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2883
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
can select an initial codec mode specified in TS 45.009.
This parameter is set to the initial codec mode as required.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.63.44 AMR HR Start mode

Full Name
AMR HR Start mode
Abbreviated Name
amrHrStartMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter decides the initial codec mode for the AMR HR
speech version. The value must not be larger than the number of
codec modes contained in the ACS. The parameter values are
1: the initial codec mode employs the one with the lowest speed
2: the initial codec mode employs the one with the second lowest
speed
3: the initial codec mode employs the one with the third lowest speed
4: the initial codec mode employs the one with the forth lowest speed
2-2884
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
1..4
Unit
N/A
Default Value
Related Parameters
amrHalfAcs1
amrHalfAcs2
amrHalfAcs3
amrHalfAcs4
amrHalfAcs5
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the cell has a better radio coverage, you can select a higher initial
rate to improve the speech quality.
Using the lowest coding mode can ensure that comparatively good
Reason
voice quality can be provided in a poor radio condition.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.101/V6.30.101
N/A

Full Name
Abbreviated Name
amrWfsHysteresis1
Managed Object

2-2885
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
hysteresis
3GPP Reference
N/A
Description
of the AMR WFR codec to 8.85 kbps. When the current bit rate on a
channel is lower than 8.85 kbps, the bit rate of the AMR WFS codec
is increased to 8.85 kbps if the detected CIR is higher than the sum
of amrWfrThresholds1 and amrWfrHysteresis1.
Instance
BSC
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
amrWfsHysteresis1
amrWfsThresholds2
amrWfsHysteresis2
amrWfsThresholds1+amrWfsHysteresis1amrWfsThresholds2+am-
Parameters
rWfsHysteresis2.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2886
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
amrWfsHysteresis2
Managed Object

3GPP Name
hysteresis
3GPP Reference
N/A
Description
of the AMR WFR codec to 12.65 kbps. When the current bit rate on
a channel is lower than 12.65 kbps, the bit rate of the AMR WFS
the sum of amrWfrThresholds2 and amrWfrHysteresis2.
Instance
BSC
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
amrWfsHysteresis1
amrWfsThresholds2
amrWfsHysteresis1
amrWfsThresholds1+amrWfsHysteresis1amrWfsThresholds2+am-
Parameters
rWfsHysteresis2.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
2-2887
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

N/A

Full Name
Abbreviated Name
amrOwfsHysteresis1
Managed Object

3GPP Name
hysteresis
3GPP Reference
N/A
Description
The four hysteresis properties changed in AMROWFS mode are

amrOwfsHysteresis1, amrOwfsHysteresis2, amrOwfsHysteresis3,
and amrOwfsHysteresis4.
Instance
BSC
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
2-2888
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrOwfsHysteresis2
Managed Object

3GPP Name
hysteresis
3GPP Reference
N/A
Description

Instance
BSC
2-2889
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

2-2890
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
amrOwfsHysteresis3
Managed Object

3GPP Name
hysteresis
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsThresholds4
amrOwfsHysteresis4
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
2-2891
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrOwfsHysteresis4
Managed Object

3GPP Name
hysteresis
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsThresholds4
Parameters
Value Type
long
Parameter Type
2-2892
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrOwhsHysteresis1
Managed Object

3GPP Name
hysteresis
3GPP Reference
N/A
Description

values must meet the following condition:
amrOwhsThresholds1+amrOwhsHysteresis1<=amrOwhsThresholds2+amrOwhsHysteresis2
Instance
BSC
Related FG
0..15
Unit
N/A
2-2893
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
amrOwhsHysteresis1,amrOwhsHysteresis2
amrOwhsThresholds1,amrOwhsThresholds2
Parameters

Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrOwhsHysteresis2
Managed Object

3GPP Name
hysteresis
2-2894
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..15
Unit
N/A
Default Value
Related Parameters
amrOwfsThresholds1,amrOwfsThresholds2
Parameters

Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2895
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
amrWfsThresholds1
Managed Object

3GPP Name
threshold
3GPP Reference
N/A
Description
This parameter specifies a CIR threshold for reducing the AMRWFS

codec rate from 8.85kbps. The rate is reduced when the CIR is
lower than the threshold.
Instance
BSC
Related FG
0..63
Unit
0.5dBm
Default Value
Related Parameters
amrWfsHysteresis1,amrWfsHysteresis2,amrWfsHysteresis3,amrWfsHysteresis4
amrWfsThresholds1,amrWfsThresholds2,amrWfsThresholds3,amrWfsThresholds4
The threshold for changing AMRWFS mode consists of four factors:
Parameters
amrWfsThresholds1, amrWfsThresholds2, amrWfsThresholds3, and

amrWfsThresholds4. The values must meet the following condition:
amrWfsThresholds1<=amrWfsThresholds2<=amrWfsThresholds3<=amrWfsThresholds4,amrWfsThresholds1+amrWfsHysteresis1<=amrWfsThresholds2+amrWfsHysteresis2<=amrWfsThresholds3+amrWfsHysteresis3<=amrWfsThresholds4+amrWfsHysteresis4
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2896
SJ-20140527134815-013|2015-03-10(R1.1)
Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrWfsThresholds2
Managed Object

3GPP Name
threshold
3GPP Reference
N/A
Description
This parameter specifies a CIR threshold for reducing the AMRWFS

codec rate from 12.65kbps. The rate is reduced when the CIR is
lower than the threshold.
Instance
BSC
Related FG
0..63
Unit
0.5dBm
Default Value
Related Parameters
amrWfsHysteresis1,amrWfsHysteresis2,amrWfsHysteresis3,amrWfsHysteresis4
amrWfsThresholds1,amrWfsThresholds2,amrWfsThresholds3,amrWfsThresholds4
2-2897
SJ-20140527134815-013|2015-03-10(R1.1)
The threshold for changing AMRWFS mode consists of four factors:
Parameters
amrWfsThresholds1, amrWfsThresholds2, amrWfsThresholds3, and

amrWfsThresholds4. The values must meet the following condition:
amrWfsThresholds1<=amrWfsThresholds2<=amrWfsThresholds3<=amrWfsThresholds4,amrWfsThresholds1+amrWfsHysteresis1<=amrWfsThresholds2+amrWfsHysteresis2<=amrWfsThresholds3+amrWfsHysteresis3<=amrWfsThresholds4+amrWfsHysteresis4
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrOwfsThresholds1
Managed Object

3GPP Name
threshold
3GPP Reference
N/A
2-2898
SJ-20140527134815-013|2015-03-10(R1.1)
Description

AMROWFS codec rate from 8.85kbps. The rate is reduced when
Instance
BSC
Related FG
0..63
Unit
0.5dBm
Default Value
Related Parameters
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
amrOwfsThresholds1<=amrOwfsThresholds2<=amrOwfsThresh-
Parameters
olds3<=amrOwfsThresholds4,
amrOwfsThresholds1+amrOwfsHysteresis1<=amrOwfsThresholds2+amrOwfsHysteresis2<=amrOwfsThresholds3+amrOwfsHysteresis3<=amrOwfsThresholds4+amrOwfsHysteresis4
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
2-2899
SJ-20140527134815-013|2015-03-10(R1.1)
N/A

Full Name
Abbreviated Name
amrOwfsThresholds2
Managed Object

3GPP Name
threshold
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..63
Unit
0.5dBm
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2900
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrOwfsThresholds3
Managed Object

3GPP Name
threshold
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..63
Unit
0.5dBm
Default Value
2-2901
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsHysteresis3
amrOwfsThresholds4
amrOwfsHysteresis4
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No


Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrOwfsThresholds4
2-2902
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
threshold
3GPP Reference
N/A
Description

Instance
BSC
Related FG
0..63
Unit
0.5dBm
Default Value
Related Parameters
amrOwfsThresholds1
amrOwfsHysteresis1
amrOwfsThresholds2
amrOwfsHysteresis2
amrOwfsThresholds3
amrOwfsHysteresis3
amrOwfsHysteresis4
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
simulation.
Change take effect
No
2-2903
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrOwhsThresholds1
Managed Object

3GPP Name
threshold
3GPP Reference
N/A
Description

AMROWHS codec rate from 8.85kbps. The rate is reduced when
Instance
BSC
Related FG
0..63
Unit
0.5dBm
Default Value
Related Parameters
Parameters

amrOwhsThresholds1<=amrOwhsThresholds2,
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2904
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
amrOwhsThresholds2
Managed Object

3GPP Name
threshold
3GPP Reference
N/A
Description

AMROWHS codec rate from 12.65kbps. The rate is reduced when
Instance
BSC
Related FG
0..63
Unit
0.5dBm
Default Value
Related Parameters
2-2905
SJ-20140527134815-013|2015-03-10(R1.1)
Parameters

amrOwhsThresholds1<=amrOwhsThresholds2,
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
simulation.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.63.61 Maximum number of Codecs Modes in the Active Codec Set

Full Name
Maximum number of Codecs Modes in the Active Codec Set
Abbreviated Name
MACS
Managed Object

3GPP Name
MACS
3GPP Reference
26.103
2-2906
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the maximum number of rates that an ACS

of AMR supports with a range of 1 through 4. If the MACS value is
4, it means the ACS can support one, two, three or four rates. If the
MACS value is 1, it means only one rate can be supported.
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..3
1: 1
2: 2
3: 3
0: 4
Unit
N/A
Default Value
Related Parameters
amrFullAcs1
amrFullAcs2
amrFullAcs3
amrFullAcs4
amrFullAcs5
amrFullAcs6
amrFullAcs7
amrFullAcs8
amrHalfAcs1
amrHalfAcs2
amrHalfAcs3
amrHalfAcs4
amrHalfAcs5
The number of those parameters (from amrFullAcs1 to amrFullAcs8)
Parameters
whose values are 1 at the same time should not be greater than
MACS.
The number of those parameters (from amrHalfAcs1 to
amrHalfAcs5) whose values are 1 at the same time should not be
greater than MACS.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended. As specified in the GSM
specification, the maximum value of MACS is 4, and the ACS can

flexibly configure one, two, three, or four rates.
2-2907
SJ-20140527134815-013|2015-03-10(R1.1)
As required by the GSM specification, the maximum value of MACS
Reason
is 4. To flexibly configure the rate, it is recommended to set this

parameter to 4.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.63.62 Full Rate Supported Codec Set(4.75kbps)

Full Name
Full Rate Supported Codec Set(4.75kbps)
Abbreviated Name
FRSCS1
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
This parameter indicates whether the Full Rate AMR (FR AMR)
supports 4.75k. If yes, the full-rate ACS can be configured with the
current rate. If not, the ACS cannot be configured with the current
rate, therefore, FR AMR speech cannot use the current rate.
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrFullAcs1
When FRSCS1 is 0, amrFullAcs1 cannot be set to 1.
Parameters
2-2908
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value is recommended, which means the current rate
is supported and can be selected by the ACS. If this value is

modified to 0, the ACS cannot select the current rate, so it is not
The SCS supports all the rates by default.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
FRSCS2
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
Instance
BSC
Related FG
ZGO-04-02-006 TFO
2-2909
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrFullAcs2
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
FRSCS3
Managed Object

3GPP Name
SCS
2-2910
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
26.103
Description
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrFullAcs3
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2911
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
FRSCS4
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrFullAcs4
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
2-2912
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
FRSCS5
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrFullAcs5
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2913
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
FRSCS6
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
2-2914
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrFullAcs6
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
FRSCS7
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
2-2915
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrFullAcs7
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
FRSCS8
Managed Object

2-2916
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
SCS
3GPP Reference
26.103
Description
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrFullAcs8
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2917
SJ-20140527134815-013|2015-03-10(R1.1)
2.63.70 Half Rate Supported Codec Set(4.75kbps)

Full Name
Half Rate Supported Codec Set(4.75kbps)
Abbreviated Name
HRSCS1
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
This parameter indicates whether the Half Rate AMR (HR AMR)
supports 4.75k. If yes, the ACS can be configured with the current
rate. If not, the ACS cannot be configured with the current rate,
therefore, HR AMR speech cannot use the current rate.
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrHalfAcs1
When HRSCS1 is 0, amrHalfAcs1 cannot be set to 1.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
2-2918
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
HRSCS2
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrHalfAcs2
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2919
SJ-20140527134815-013|2015-03-10(R1.1)

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
HRSCS3
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
2-2920
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
amrHalfAcs3
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
HRSCS4
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
2-2921
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrHalfAcs4
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
HRSCS5
Managed Object

2-2922
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
SCS
3GPP Reference
26.103
Description
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrHalfAcs5
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2923
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
HRSCS6
Managed Object

3GPP Name
SCS
3GPP Reference
26.103
Description
rate. If not, the ACS cannot be configured with the current rate.
Therefore, HR AMR speech cannot use the current rate.
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
amrHalfAcs6
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

recommended to modify the default value. For Abis over E1, the HR
AMR does not support 7.95k, so this parameter must be 0, and
the ACS cannot select this rate.
Reason
Change take effect
No
2-2924
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.63.76 Mismatch Resolved

Full Name
Mismatch Resolved
Abbreviated Name
MismatchResolved
Managed Object

3GPP Name
Codec Mismatch Resolution
3GPP Reference
28.062
Description
When the TFO function is enabled, if a TFO cannot be established

due to mismatched voice versions, this parameter is enabled. This
function is used to search for a preferential voice version from the
voice algorithms supported by the MS by changing the MS mode or
changing the current voice version to the preferential one.
Instance
BSC
Related FG
ZGO-04-02-006 TFO
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
TFOEnable
This switch is invalid if the TFO function is disabled.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2925
SJ-20140527134815-013|2015-03-10(R1.1)
When the TFO function is enabled and the counter of failing to
establish TFOs due to voice version mismatch has a high value, this
function is enabled to increase the TFO establishment success rate.
If it works well, the function should be kept enabled.
To avoid voice break caused by mode change triggered for resolving
Reason
TFO mismatch, this function is disabled by default.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64 BSS Dynamic Frequency

Configuration(GBssDynFreq)
2.64.1 BSS Dynamic Frequency Configuration ID
Full Name
BSS Dynamic Frequency Configuration ID
Abbreviated Name
GBssDynFreqId
Managed Object
BSS Dynamic Frequency Configuration(GBssDynFreq)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a BSS dynamic frequency configuration ID.
Instance
RNC
Related FG
N/A
Unit
N/A
Default Value
N/A
2-2926
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->BSS Dynamic Frequency Configuration
N/A
2.64.2 Support Dynamic Frequency Allocate

Full Name
Support Dynamic Frequency Allocate
Abbreviated Name
SupportDynamicFreq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a BSC-level switch controlling dynamic frequency

allocation.
Instance
BSC
Related FG
2-2927
SJ-20140527134815-013|2015-03-10(R1.1)
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Dynamic frequency allocation is applicable to the scenario with tidal
effect, which means some cells in an area are idle but some others
are busy, and different cells have different busy time, for example,
the subscribers are working in the office area in the daytime, and
back to the residential area at night.
By default, this function is disabled.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.3 Observe upLink Interference when allocate frequency

Full Name
Observe upLink Interference when allocate frequency
Abbreviated Name
ObserveUpInterf
Managed Object

2-2928
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether uplink interferences are

considered before dynamic frequency allocation is enabled.
Instance
Cell
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Generally no modification is required. The KPI and dynamic
frequency allocation should be observed before any modification.
It is recommended to consider both uplink and downlink
Reason
interferences.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.4 Observe downLink Interference when allocate frequency

2-2929
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Observe downLink Interference when allocate frequency
Abbreviated Name
ObserveDownInterf
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether downlink interferences are

considered before dynamic frequency allocation is enabled.
Instance
BSC
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to consider both uplink and downlink
Reason
interferences.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2930
SJ-20140527134815-013|2015-03-10(R1.1)
2.64.5 Observe other trx Interference when allocate frequency

Full Name
Observe other trx Interference when allocate frequency
Abbreviated Name
ObserveOtherTrx
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether interferences on other

corresponding carriers are also considered before dynamic
frequency allocation is enabled.
Instance
Cell
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Besides interferences on this carrier, if interferences on other
Reason
carriers are also considered, the whole network performance could

be better.
Change take effect
Yes
Access
Read/Write
2-2931
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.6 Observe traffic when allocate frequency

Full Name
Observe traffic when allocate frequency
Abbreviated Name
ObserveTraffic
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether both interferences and traffic load

on the carrier are considered before dynamic frequency allocation
is enabled.
Instance
Cell
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If traffic load is considered, interferences can be estimated more
Reason
accurately.
Change take effect
2-2932
SJ-20140527134815-013|2015-03-10(R1.1)
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.7 Observe Interference of neighbor frequency when allocate

frequency
Full Name
Observe Interference of neighbor frequency when allocate frequency
Abbreviated Name
ObserveNeighbourFreq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether adjacent-channel interferences

are also considered besides co-channel interferences before
dynamic frequency allocation is enabled.
Instance
BSC
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2933
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
If both co-channel interferences and adjacent-channel interferences
Reason
are considered, interference analysis is more comprehensive.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.8 Statistic period of traffic on trx

Full Name
Statistic period of traffic on trx
Abbreviated Name
PeriodofTrxTraffic
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the traffic statistic period when both

interferences and traffic load on the carrier are considered for
dynamic frequency allocation.
Instance
Cell
Related FG
1..30
Unit
min
Default Value
Related Parameters
N/A
N/A
Parameters
2-2934
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If long-term traffic load is considered, this parameter is set to a large
value; otherwise, it is set to a small value. The KPI and dynamic

frequency allocation require to be observed after modification.
The traffic load in three minutes is closer to the current value.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.9 Reduce of neighbor frequency uplink Interference

Full Name
Reduce of neighbor frequency uplink Interference
Abbreviated Name
UpNFreqReduce
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the attenuation used for calculating the

uplink adjacent-channel interference before dynamic frequency
allocation is started.
Instance
BSC
Related FG
0..30
Unit
dB
2-2935
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
18
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
By default, no modification is required. If there is an attenuation
value that is more suitable than the default one, you can adjust it.
The default value is set to 18 dB. It is a typical adjacent channel
Reason
attenuation in the GSM system.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.10 Reduce of neighbor frequency Downlink Interference

Full Name
Reduce of neighbor frequency Downlink Interference
Abbreviated Name
DownNFreqReduce
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the attenuation used for calculating the

downlink adjacent-channel interference before dynamic frequency
allocation is started.
Instance
Cell
2-2936
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
0..30
Unit
dB
Default Value
18
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
By default, no modification is required. If there is an attenuation
value that is more suitable than the default one, you can adjust it.
The default value is set to 18dB. It is a typical adjacent channel
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.11 Use neighbour frequency in cell permitted

Full Name
Use neighbour frequency in cell permitted
Abbreviated Name
AllowNeighbourfreq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2937
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether the adjacent frequencies can be

allocated to the dynamic carrier to be started.
Instance
BSC
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If frequencies are sufficient, this parameter can be set to disable
adjacent frequency allocation.
Although the adjacent frequencies cause interferences in a cell,
Reason
they still can be used.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.12 Use interference threshold

Full Name
Use interference threshold
Abbreviated Name
UseInterfThres
2-2938
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an interference threshold is used

when frequencies are allocated to the dynamic carrier to be started.
If an interference threshold is used, when the interference exceeds
the threshold InterfThres, frequencies cannot be allocated.
Instance
Cell
Related FG
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To control the quality of allocated frequencies, this threshold is used.
To ensure that more frequencies can be allocated, this threshold
Reason
is not used.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2939
SJ-20140527134815-013|2015-03-10(R1.1)
2.64.13 Interference threshold

Full Name
Interference threshold
Abbreviated Name
InterfThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the interference threshold used when

frequencies are allocated to the dynamic carrier to be started.
If UseInterfThres is set to 1, when the interference exceeds the
threshold InterfThres, frequencies cannot be allocated.
Instance
Cell
Related FG
0..63
0: < -110dBm
1: -110~-109 dBm
2: -109~-108dBm
3: -108~-107dBm
4: -107~-106dBm
5: -106~-105dBm
6: -105~-104dBm
7: -104~-103dBm
8: -103~-102dBm
9: -102~-101dBm
10: -101~-100dBm
11: -100~-99dBm
12: -99~-98dBm
13: -98~-97dBm
14: -97~-96dBm
15: -96~-95dBm
16: -95~-94dBm
17: -94~-93dBm
18: -93~-92dBm
19: -92~-91dBm
20: -91~-90dBm
21: -90~-89dBm
22: -89~-88dBm
23: -88~-87dBm
24: -87~-86dBm
25: -86~-85dBm
2-2940
SJ-20140527134815-013|2015-03-10(R1.1)
26: -85~-84dBm
27: -84~-83dBm
28: -83~-82dBm
29: -82~-81dBm
30: -81~-80dBm
31: -80~-79dBm
32: -79~-78dBm
33: -78~-77dBm
34: -77~-76dBm
35: -76~-75dBm
36: -75~-74dBm
37: -74~-73dBm
38: -73~-72dBm
39: -72~-71dBm
40: -71~-70dBm
41: -70~-69dBm
42: -69~-68dBm
43: -68~-67dBm
44: -67~-66dBm
45: -66~-65dBm
46: -65~-64dBm
47: -64~-63dBm
48: -63~-62dBm
49: -62~-61dBm
50: -61~-60dBm
51: -60~-59dBm
52: -59~-58dBm
53: -58~-57dBm
54: -57~-56dBm
55: -56~-55dBm
56: -55~-54dBm
57: -54~-53dBm
58: -53~-52dBm
59: -52~-51dBm
60: -51~-50dBm
61: -50~-49dBm
62: -49~-48dBm
63: > -48dBm
Unit
N/A
Default Value
40
Related Parameters
N/A
N/A
Parameters
2-2941
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To ensure that more frequencies can be allocated, this threshold
is increased. To ensure that the allocated frequencies have low

interferences and that no frequency is allocated if interferences are
high, this threshold is decreased.
-70 dBm is considered as a high interference, and frequencies
Reason
should not be allocated in this case.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.14 Forbid TRX due quality

Full Name
Forbid TRX due quality
Abbreviated Name
ForbidTrxDueQuality
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether the poor-quality carriers are

disabled if dynamic frequency allocation is enabled.
Instance
BSC
Related FG
0..1
Unit
N/A
2-2942
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To ensure that frequencies can be re-allocated in case that the
quality of allocated frequencies is too poor, this function is enabled.
Generally the quality of allocated frequencies is not too poor, but
Reason
enabling this function occupies CPU resources, so this function is

Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.15 UplinkThreshold of Forbid TRX due quality

Full Name
UplinkThreshold of Forbid TRX due quality
Abbreviated Name
UlQualityThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the uplink quality threshold over which

poor-quality carriers are disabled if dynamic frequency allocation
is enabled.
2-2943
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To ensure high quality, this parameter is decreased; otherwise, this
parameter is increased.
50 is considered as a poor quality, and frequencies are released
Reason
in this case.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.16 Downlink Threshold of Forbid TRX due quality

Full Name
Downlink Threshold of Forbid TRX due quality
Abbreviated Name
DlQualityThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2944
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter specifies the downlink quality threshold over which

poor-quality carriers are disabled if dynamic frequency allocation
is enabled.
Instance
Cell
Related FG
8..70
Unit
N/A
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To ensure high quality, this parameter is decreased; otherwise, this
50 is considered as a poor quality, and frequencies are released
Reason
in this case.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.64.17 Mimimum Quality Sample

Full Name
Mimimum Quality Sample
Abbreviated Name
MinQualitySample
Managed Object
2-2945
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the minimum quality samples required

to disable poor-quality carriers if dynamic frequency allocation is
enabled.
Instance
BSC
Related FG
1..65535
Unit
N/A
Default Value
5000
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To quickly determine whether the quality of a carrier is too poor, this
parameter is decreased. To accurately estimate the quality, this

5000 samples are easy to be collected, and the quality can be
Reason
accurately estimated.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2946
SJ-20140527134815-013|2015-03-10(R1.1)
2.64.18 Level difference of Subcell1 and Subcell2

Full Name
Level difference of Subcell1 and Subcell2
Abbreviated Name
SC2DIFF
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the power level difference between

sub-cells when interferences are estimated for dynamic frequency
allocation. With this power level difference, interferences can be
estimated more accurately in sub-cells.
Instance
Cell
Related FG
0..48: (-24..+24dB)
Unit
N/A
Default Value
34
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set based on the actual situation.
10 dB is a typical power level difference between sub-cells.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

2-2947
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.201/V6.30.201
N/A
2.65 BSS Dynamic Frequency Pool

Configuration(GBssDynFreqPool)
2.65.1 BSS Dynamic Frequency Pool ID
Full Name
BSS Dynamic Frequency Pool ID
Abbreviated Name
GBssDynFreqPoolId
Managed Object
BSS Dynamic Frequency Pool Configuration(GBssDynFreqPool)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ID of a BSS dynamic frequency pool.
Instance
RNC
Related FG
N/A
1..12
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
2-2948
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Restricted
OMC Access path

Information Configuration->BSS Dynamic Frequency Pool
Configuration
N/A
2.65.2 Frequency Band

Full Name
Frequency Band
Abbreviated Name
FreqBand
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequency band that the frequencies in

the dynamic frequency pool belong to.
Instance
BSC
Related FG
0: PGSM(1~124)
1: EGSM(0 ~ 124,975 ~ 1023)
2: DCS1800(512 ~ 885)
4: GSM1900(512 ~ 810)
7: GSM850(128~251)
Unit
N/A
Default Value
Related Parameters
R_BSC.FuncExt
If R_BSC.FuncExt is 0, FreqBand cannot be set to 1900 MHz. If
Parameters
R_BSC.FuncExt is 1, FreqBand cannot be set to 1800 MHz.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2949
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter is set based on the actual frequency band.
GSM900M is the most common frequency band.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.65.3 Arfcn List

Full Name
Arfcn List
Abbreviated Name
ArfcnList
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequency list in the dynamic frequency

pool. The frequencies are used for dynamic allocation.
Instance
Cell
Related FG
0..1023
Unit
N/A
Default Value
N/A
Related Parameters
R_DYNFRQPOOL.FreqBand
The frequencies in the dynamic frequency pool must be compliant
Parameters
with the configured frequency band.
Value Type
long[32]
2-2950
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set to the planned frequencies. Generally the
frequencies are contiguous.
N/A
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

Configuration
V6.50.201/V6.30.201
N/A
2.66 BSS IFTA Configuration(GBssIfta)

2.66.1 BSS IFTA Configuration ID
Full Name
BSS IFTA Configuration ID
Abbreviated Name
GBssIftaId
Managed Object
BSS IFTA Configuration(GBssIfta)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a BSS IFTA configuration ID.
Instance
RNC
Related FG
N/A
Unit
N/A
2-2951
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->BSS IFTA Configuration
N/A
2.66.2 Support IFTA

Full Name
Support IFTA
Abbreviated Name
IFTASupport
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a BSC-level switch that controls whether IFTA

is supported. Intelligent Frequency Timeslot Allocation (IFTA) is a
C/I-based dynamic channel allocation technology.
Instance
BSC
2-2952
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Feature Guide
0..1
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
R_BTS.POWERPRIORITY
If IFTA is supported, which means that R_BSCIFTA.IFTASUPPORT
Parameters
is set to 1, R_BTSOAM.POWERPRIORITY can only be set to 4.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
IFTA is used when large network capacity is expected but fewer
frequencies are available.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.3 Perform IFTA channel check

Full Name
Perform IFTA channel check
Abbreviated Name
IFTACheck
Managed Object

2-2953
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to initiate a check procedure

to another RRM module (CMP or BSC) after an IFTA channel is
allocated.
Instance
Cell
Related FG

Feature Guide
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To improve the system performance, you can enable this parameter
and meanwhile ensure that the CPU load is not too high.
A check procedure between RRM modules increases the number
Reason
of messages, which has limited effects on the performance

improvement.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2954
SJ-20140527134815-013|2015-03-10(R1.1)
2.66.4 Retry allocation Times after IFTA channel check fail

Full Name
Retry allocation Times after IFTA channel check fail
Abbreviated Name
IFTARetry
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
After attempting to allocate an IFTA channel, the RRM module may

receive a failure response after sending a check request to another
RRM module (CMP or BSC), which means that the IFTA allocation
fails. This parameter specifies the number of times that the BSC
attempts to reallocate IFTA channels.
Instance
BSC
Related FG

Feature Guide
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To improve the system performance, you can set this parameter to a
non-zero number. By default, it is set to 1.
A check procedure between RRM modules increases the number
Reason
of messages, which has limited effect on the performance

improvement.
Change take effect
No
Access
Read/Write
2-2955
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.5 Uplink Threshold of send interference information

Full Name
Uplink Threshold of send interference information
Abbreviated Name
SendInterfUpThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an uplink threshold for sending interference

data. If the uplink CIR variation exceeds the value of this parameter,
the RRM module sends the interference data to other RRM modules
immediately.
Instance
Cell
Related FG

Feature Guide
1..20,255
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To improve the network performance, you can decrease the value of
this parameter, which means other modules are informed when the
CRI variation is still small. However CPU load will be increased.
If the value of this parameter exceeds 3 dB, it means CRI variation
Reason
is high.
2-2956
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.6 Downlink Threshold of send interference information

Full Name
Downlink Threshold of send interference information
Abbreviated Name
SendInterfDnThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a downlink threshold for sending

interference data. If the downlink CIR variation exceeds the value
of this parameter, the RRM module sends the interference data to
other RRM modules immediately.
Instance
Related FG
Cell
Feature Guide
1..20,255
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2957
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
To improve the network performance, you can decrease the value of
this parameter, which means other modules are informed when the
CRI variation is still small. However CPU load will be increased.
If the value of this parameter exceeds 3 dB, it means CRI variation
Reason
is high.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.7 Period for IFTA measurement report process

Full Name
Period for IFTA measurement report process
Abbreviated Name
IftaMrProcessN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the IFTA function is enabled, the measurement report for

interference data must be regularly updated. The update period
is an integral multiple of the measurement report period. This
parameter indicates the period for updating the interference data.
Instance
BSC
Related FG

Feature Guide
1..20
Unit
N/A
Default Value
Related Parameters
N/A
2-2958
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the CPU load is high due to large traffic, you can increase the
value of this parameter to decrease the processing load.
The default value is set to 1 to update interference data in time.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.8 Period for IFTA transfer measurement information to other

RRM
Full Name
Period for IFTA transfer measurement information to other RRM
Abbreviated Name
IftaSendMrN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the IFTA function is enabled, the measurement report must

be sent to other RRM modules including the CMP inside the BSC
and other BSCs. The sending period is an integral multiple of the
measurement report period. This parameter indicates the period for
sending the measurement report to other RRM modules.
Instance
Cell
2-2959
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Feature Guide
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the CPU load is high due to large traffic, you can increase the
value of this parameter to decrease the number of measurement

reports sent to other RRM modules.
The default value is set to 1 to update interference data to other
Reason
RRM modules in time.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.9 IFTA channel check timer

Full Name
IFTA channel check timer
Abbreviated Name
TIftaCheck
Managed Object

3GPP Name
N/A
2-2960
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
This parameter specifies the duration for the RRM module to wait
for an IFTA check response sent from other RRM modules after
allocating an IFTA channel and initiating a check.
Instance
BSC
Related FG

Feature Guide
1..50
Unit
100ms
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
By default, no modification is needed. You can increase the value of
this parameter because messages may delay during the information

exchange.
The default value is set to 2 (s). It is sufficient for information
Reason
exchange.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.10 History measurement record confidence probability

Full Name
History measurement record confidence probability

2-2961
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
HisConfprobability
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the confidence probability when the

historical measurement records are updated, that is, a probability
that the actual level in the interference neighbor cell is lower than
the estimated value. If the actual level is lower than the estimated
value, the allocated channels are in good quality.
Instance
Cell
Related FG

Feature Guide
5..95
Unit
Default Value
85
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the allocated channel congestion occurs, you can decrease the
value of this parameter. If the radio performance indexes are worse,

you can increase the value of this parameter.
The default value is set to 85. It ensures that the interference is
Reason
lower than the estimated value in most cases.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
2-2962
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.66.11 History measurement record Update period

Full Name
History measurement record Update period
Abbreviated Name
HisUpdatePeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the period for updating the historical

measurement records. When the period expires, the level in the
interference cell is re-estimated. The new estimated level value is
used in subsequent measurement in case that no interference cell
is detected.
Instance
Related FG
BSC
Feature Guide
1..255
Unit
10min
Default Value
12
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the distribution of subscribers in the network changes slowly, you
can increase the value of this parameter.
The default value is set 2 (h). It reflects the subscribers radio
Reason
environment most recently.
Change take effect
No
0
2-2963
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.12 History measurement record Update factor

Full Name
History measurement record Update factor
Abbreviated Name
HisUpdatefactor
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the update factor of historical measurement

records, that is, the proportion of new estimated value in calculating
the historical interference.
Instance
Cell
Related FG

Feature Guide
1..99
Unit
Default Value
50
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the distribution of subscribers in the network changes fast, you
can increase the value of this parameter.
2-2964
SJ-20140527134815-013|2015-03-10(R1.1)
The new measurement granularity is treated with the same priority
Reason
of the last one.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.13 History measurement record Guard Period

Full Name
History measurement record Guard Period
Abbreviated Name
HisGuardPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the protective period for historical

measurement records, that is, the period to keep historical
interference data even if the interference cell has no measurement
data.
Instance
Cell
Related FG

Feature Guide
1..200,255
Unit
N/A
Default Value
144
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-2965
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
If the neighbor cell interference is estimated not too high, you can
set this parameter to a higher value. Otherwise, you should set

it to a lower value.
The default value indicates that the neighbor cell cannot be
Reason
measured in such a long time.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.14 Report IFTA channel info

Full Name
Report IFTA channel info
Abbreviated Name
RptIftaChlInfo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If this parameter is set to 1 (Yes), it means the IFTA channel

information is tracked and output through the Abis signaling.
Instance
BSC
Related FG

Feature Guide
0..1
0: No
1: Yes
Unit
N/A
2-2966
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To observe the IFTA channel information through the Abis signaling,
you can set this parameter to 1.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.15 Report IFTA info of IMSI

Full Name
Report IFTA info of IMSI
Abbreviated Name
RptIftaImsiInfo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If this parameter is set to 1 (Yes), it means the IFTA channel

information is tracked and output through the IMSI signaling.
Instance
Cell
2-2967
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Feature Guide
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
To observe the IFTA channel information through the IMSI signaling,
you can set this parameter to 1.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.16 GPS State Delay

Full Name
GPS State Delay
Abbreviated Name
GPSStateDelay
Managed Object

2-2968
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the time delay of GPS state change. When
the GPS clock state is changed from the synchronization to loss
state, or from the loss to synchronization state, only if the new state
keeps for a certain time longer than this parameter, the state change
is confirmed, avoiding the negative effects due to state misjudgment
and repeated handovers.
Instance
Cell
Related FG

Feature Guide
0..60
Unit
min
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value of this parameter depends on how long the BTS can keep
frame number synchronization after the synchronization signal of

GPS is lost.
The default value is set to 10 minutes. It indicates that the BTS can
Reason
keep synchronization for 10 minutes after the GPS signal is lost.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2969
SJ-20140527134815-013|2015-03-10(R1.1)
2.66.17 UpLink Noise Level

Full Name
UpLink Noise Level
Abbreviated Name
ULNoiseLevel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink noise value in IFTA channel

allocations. It is set to ensure that the uplink signal level of an
allocated IFTA channel is a certain value higher than the noise level.
Instance
BSC
Related FG

Feature Guide
0..30: (-120dBm..-90dBm)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
By default, no modification is needed. You can modify it based on
BTS receiving capability.
The default value is set based on BTS receiving capability.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-2970
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.201/V6.30.201
N/A
2.66.18 DownLink Noise Level

Full Name
DownLink Noise Level
Abbreviated Name
DLNoiseLevel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink noise value in IFTA channel

allocations. It is set to ensure that the downlink signal level of an
allocated IFTA channel is a certain value higher than the noise level.
Instance
Related FG
Cell
Feature Guide
0..30: (-120dBm..-90dBm)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
By default, no modification is needed. You can modify it based on
MS receiving capability.
The default value is set based on MS receiving capability.
Reason
Change take effect
Yes
2-2971
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.19 IFTA Wait Measurement Report Timer

Full Name
IFTA Wait Measurement Report Timer
Abbreviated Name
TIFTAWaitMr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the IFTA function is enabled, the BSC needs to receive

a measurement report with neighbor cell measurement data to
estimate interference before allocating TCH channels. However, in
some cases, if the BSC does not receive a measurement report
with neighbor cell measurement data after receiving an assignment
command from the MSC, it needs to wait for a certain time to
receive the measurement report. The BSC can be set to wait for
several times. This parameter specifies how long the BSC waits in
each time.
Instance
BSC
Related FG

Feature Guide
5..60
Unit
100ms
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-2972
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
This parameter is related to the call flow in the local network,
intended for the reception of the measurement reports with

measurement values of neighbor cells.
In most cases, after 2 seconds, the measurement report is sent
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.20 IFTA Wait Measurement Report Retries

Full Name
IFTA Wait Measurement Report Retries
Abbreviated Name
IFTAWaitMrRetries
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the IFTA function is enabled, the BSC needs to receive

a measurement report with neighbor cell measurement data to
estimate interferences before allocating TCH channels. However in
some cases, if the BSC does not receive the measurement report
with neighbor cell measurement data after receiving an assignment
command from the MSC, it needs to wait for a certain time to
receive the measurement report. The BSC can be set to wait for
several times. This parameter specifies number of times that the
BSC waits for.
Instance
Cell
2-2973
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Feature Guide
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is related to the call flow in the local network,
intended for the reception of the measurement reports with

measurement values of neighbor cells.
In most cases, after 2 seconds, the measurement report is sent
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.21 Uplink Neighbour Frequence Reduce

Full Name
Uplink Neighbour Frequence Reduce
Abbreviated Name
UpNFreqReduce
Managed Object

3GPP Name
N/A
2-2974
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Reference
N/A
Description
During an IFTA allocation procedure, the system estimates the

uplink co-channel interference and adjacent frequency interference.
The adjacent frequency interference has minor effect therefore
attenuation is used during calculation. This parameter indicates the
attenuation in calculating the uplink adjacent frequency interference.
Instance
Cell
Related FG

Feature Guide
0..30
Unit
dB
Default Value
18
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
By default, no modification is needed. If there is an attenuation
value that is more suitable than the default during the calculation for
the uplink adjacent frequency interference, you can adjust it.
The default value is set to 18 dB. It is a typical attenuation value of
Reason
the adjacent channel in the GSM system.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2975
SJ-20140527134815-013|2015-03-10(R1.1)
2.66.22 Downlink Neighbour Frequence Reduce

Full Name
Downlink Neighbour Frequence Reduce
Abbreviated Name
DownNFreqReduce
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
During an IFTA allocation procedure, the system estimates

the downlink co-channel interference and adjacent frequency
interference. The adjacent frequency interference has minor effects
therefore attenuation is used during calculation. This parameter
indicates the attenuation in calculating the downlink adjacent
frequency interference.
Instance
BSC
Related FG

Feature Guide
0..30
Unit
dB
Default Value
18
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
By default, no modification is needed. If there is an attenuation
value that is more suitable than the default during the calculation for
the downlink adjacent frequency interference, you can adjust it.
The default value is set to 18 dB. It is a typical adjacent channel
Reason
Change take effect
No
2-2976
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.23 Method for deal other user when IFTA allocate Channel
Full Name
Method for deal other user when IFTA allocate Channel
Abbreviated Name
OtherUserCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates two methods for handling other subscribers

during IFTA channel allocations. Method 1: all the subscribers' CIR
must be higher than the CIR threshold, but it may easily lead to an
allocation failure. Method 2: some subscriber CIRs are allowed to
be lower than the CIR threshold, to make the allocations easier to
be successful.
Instance
Cell
Related FG

Feature Guide
0..1
0: Method1
1: Method2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2977
SJ-20140527134815-013|2015-03-10(R1.1)
In most cases, Method 2 is selected. Method 1 can be selected
when the frequency resources are abundant and the IFTA channel
allocation succeeds easily.
To increase the success rate of IFTA channel allocations, Method 2
Reason
is generally selected because the subscriber's CIR that is lower than

the CIR threshold is not caused by the channel allocation.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.24 Permitted Uplink CIR Reduce of other user

Full Name
Permitted Uplink CIR Reduce of other user
Abbreviated Name
OtherUpReduce
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the permitted uplink CIR reduction of other

subscribers during IFTA channel allocations. This parameter works
when OtherUserCtrl is set to Method 2.
Instance
BSC
Related FG

Feature Guide
0..10
Unit
dB
Default Value
Related Parameters
N/A
2-2978
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the frequency resources are abundant and the IFTA channel
allocation succeeds easily, you can decrease the value of this

parameter. If the IFTA channel allocation fails easily, you can
The default value is set 3 dB. The 3 dB CIR reduction is appropriate
Reason
in most cases.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.25 Permitted downlink CIR Reduce of other user

Full Name
Permitted downlink CIR Reduce of other user
Abbreviated Name
OtherDnReduce
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the permitted downlink CIR reduction of

other subscribers during IFTA channel allocations. This parameter
works when OtherUserCtrl is set to Method 2.
Instance
Cell
2-2979
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Feature Guide
0..10
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the frequency resources are abundant and the IFTA channel
allocation succeeds easily, you can decrease the value of this

parameter. If the IFTA channel allocation fails easily, you can
The default value is set 3 dB. The 3 dB CIR reduction is appropriate
Reason
in most cases.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.26 Interference difference of Uplink Same TSC and different

TSC
Full Name
Interference difference of Uplink Same TSC and different TSC
Abbreviated Name
UpTscDiff
Managed Object
2-2980
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink interference difference between

the same TSC and different TSC during IFTA channel allocations. If
the TSCs are the same, the interference has bigger effect.
Instance
Related FG
Cell
Feature Guide
0..30
Unit
dB
Default Value
19
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The value needs no modification in most cases. If you need to
adjust this parameter, you can decrease the value of this parameter
when congestion occurs, or increase it when the signal quality is
poor. And the CIR threshold should be considered.
The simulation proves that the CIR required by the same TSC is
Reason
19 dB higher than that required by the different TSC when IRC

modulation is used in uplink.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2981
SJ-20140527134815-013|2015-03-10(R1.1)
2.66.27 Interference difference of Downlink Same TSC and different

TSC for SAIC MS
Full Name
Interference difference of Downlink Same TSC and different TSC

for SAIC MS
Abbreviated Name
DownTscDiffSaic
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

the same TSC and different TSC when the MS supports SAIC
during IFTA channel allocations. If the TSCs are the same, the
interference has bigger effect.
Instance
BSC
Related FG

Feature Guide
0..30
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
The simulation proves that the CIR required by the same TSC is 9
dB higher than that required by the different TSC if the MS supports
SAIC in downlink.
Change take effect
No
2-2982
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.28 Interference difference of Downlink Same TSC and different

TSC for NON SAIC MS
Full Name
Interference difference of Downlink Same TSC and different TSC

for NON SAIC MS
Abbreviated Name
DownTscDiffNonSaic
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

the same TSC and different TSC when the MS does not support
SAIC during IFTA channel allocations. If the TSCs are the same,
the interference has bigger effect.
Instance
Cell
Related FG

Feature Guide
0..30
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
2-2983
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
The simulation proves that the CIR required by the same TSC is 3
Reason
dB higher than that required by the different TSC if the MS does

not support SAIC in downlink.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.29 History Record Threshold

Full Name
History Record Threshold
Abbreviated Name
HistoryRecThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the historical record threshold for

interference statistics. When the number of samples in the last
period is lower than this threshold, the historical interference record
is not updated.
Instance
BSC
Related FG

Feature Guide
0..5000
Unit
N/A
2-2984
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
400
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If this parameter is too high, the statistics result will be more
accurate but the number of samples may not be enough in a certain

period. If this parameter is too low, the accuracy will be lower but
the statistic process always works. The parameter should be set
based on the statistical period.
The default value is set to 400. It is sufficient for sampling historical
Reason
records.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.30 Use Last Measurement Report

Full Name
Use Last Measurement Report
Abbreviated Name
UseLastMr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2985
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates a switch that controls whether to use

the last measurement values if the measurement values of the
interference neighbor cells are not reported.
Instance
Cell
Related FG

Feature Guide
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to enable this parameter. This parameter
provides flexibility for measurement.
The last measurement values are more accurate than the historical
Reason
interference values.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.31 Uplink Cir difference1 of HR

Full Name
Uplink Cir difference1 of HR

2-2986
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
UlHrCirDiff1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink CIR difference of a Half Rate

(HR) channel. When the HR channels are allocated, sub-timeslot 1
of the even-number slot and sub-timeslot 0 of the odd-number slot
are allocated first.
Channels that meet the lowest CIR are selected through calculation
and then allocated. There are two rules for allocating the channels
that meet the target CIR. Rule 1: the channel with the highest CIR
is allocated first. For sub-timeslot 1 of the even-number slot and
sub-timeslot 0 of the odd-number slot, the UL CIR is increased
by R_BSCIFTA.UlHrCirDiff1, and the DL CIR is increased by
R_BSCIFTA.DlHrCirDiff1. Channels are queued based on the
increased or decreased CIR and then allocated preferentially. Rule
2: The channel with the lowest CIR is allocated first. For sub-timeslot
1 of the even-number slot and sub-timeslot 0 of the odd-number
slot, the UL CIR is decreased by R_BSCIFTA.UlHrCirDiff1, and
the DL CIR is decreased by R_BSCIFTA.DlHrCirDiff1. Channels
are queued based on the increased or decreased CIR and then
allocated preferentially.
During allocation of the channels that meet the lowest CIR but fail
to meet the target CIR, for sub-timeslot 1 of the even-number slot
and sub-timeslot 0 of the odd-number slot, the UL CIR is increased
R_BSCIFTA.DlHrCirDiff2, aiming to allocate these channels first.
Instance
BSC
Related FG

Feature Guide
0..10
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
2-2987
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
It is not recommended to adjust this parameter to a high value.
You can adjust it properly by observing the variation of network

performances such as call drop rate.
If the channels meet the target CIR, you can adjust the value of this
Reason
parameter during channel queuing.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.32 Downlink Cir difference1 of HR

Full Name
Downlink Cir difference1 of HR
Abbreviated Name
DlHrCirDiff1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

2-2988
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG

Feature Guide
0..10
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

If the channels meet the target CIR, you can adjust the value of this
Reason
parameter during channel queuing.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2989
SJ-20140527134815-013|2015-03-10(R1.1)
2.66.33 Uplink Cir difference2 of HR

Full Name
Uplink Cir difference2 of HR
Abbreviated Name
UlHrCirDiff2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Cell
Related FG

Feature Guide
0..10
Unit
dB
Default Value
Related Parameters
N/A
2-2990
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

If the channels do not meet the target CIR, you need to ensure a
Reason
better CIR instead of adjusting this parameter.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.34 Downlink Cir difference2 of HR

Full Name
Downlink Cir difference2 of HR
Abbreviated Name
DlHrCirDiff2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2991
SJ-20140527134815-013|2015-03-10(R1.1)
Description

Instance
BSC
Related FG

Feature Guide
0..10
Unit
dB
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2992
SJ-20140527134815-013|2015-03-10(R1.1)
If the channels do not meet the target CIR, you need to ensure a
Reason
better CIR instead of adjusting this parameter.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.35 Use Low Level of neighbour cell

Full Name
Use Low Level of neighbour cell
Abbreviated Name
UseNcellLowLevel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the low level in a neighbor cell for

calculating historical interference. If a neighbor cell does not report
the measurement value, this parameter controls whether to fill in a
relatively low level for historical interference evaluation.
Instance
Cell
Related FG

Feature Guide
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2993
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to enable this parameter. You can disable it if
the radio quality is not desirable.
Using the low level in the neighbor cell can obtain an interference
Reason
evaluation value that is not so high.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.36 Threshold for IFTA ignore interference

Full Name
Threshold for IFTA ignore interference
Abbreviated Name
IFTALowLevel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold for ignoring interference

when IFTA channels are allocated.
Instance
Cell
Related FG

Feature Guide
0..30: (-120dBm..-90dBm)
Unit
N/A
Default Value
20
2-2994
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If congestions occurs frequently, you can increase this value. If the
radio quality is poor, you can decrease this value.
The default value is set to 20. It is a relatively low value that does
Reason
not cause serious effect on channel allocation when the cell signal
quality is good.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.37 IFTA channel adopt uplink power optimize

Full Name
IFTA channel adopt uplink power optimize
Abbreviated Name
UpPwrOpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to use uplink

initial power optimization when IFTA channels are allocated.
Instance
BSC
2-2995
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Feature Guide
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to enable this parameter, aiming to decrease
the total network interference. If the success rate of allocation or

handover decreases, you can disable this parameter.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.38 IFTA channel adopt downlink power optimize

Full Name
IFTA channel adopt downlink power optimize
Abbreviated Name
DownPwrOpt
Managed Object

2-2996
SJ-20140527134815-013|2015-03-10(R1.1)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to use

downlink initial power optimization when IFTA channels are
allocated.
Instance
Related FG
Cell
Feature Guide
0..1
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It is recommended to enable this parameter, aiming to decrease
the total network interference. If the success rate of allocation or

handover decreases, you can disable this parameter.
Reason
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-2997
SJ-20140527134815-013|2015-03-10(R1.1)
2.66.39 CIR allowance for IFTA channel uplink power optimize

Full Name
CIR allowance for IFTA channel uplink power optimize
Abbreviated Name
UpCirRsv
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CIR margin reserved for IFTA uplink
power optimization.
Instance
BSC
Related FG

Feature Guide
0..48
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the success rate of allocation or handover decreases after the
power optimization, you can increase the value of this parameter.
Reserving a proper CIR margin can ensure the success rate of
Reason
allocation and handover.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
2-2998
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.66.40 CIR allowance for IFTA channel downlink power optimize

Full Name
CIR allowance for IFTA channel downlink power optimize
Abbreviated Name
DownCirRsv
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CIR margin reserved for IFTA downlink
power optimization.
Instance
Cell
Related FG

Feature Guide
0..48
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the success rate of allocation or handover decreases after the
power optimization, you can increase the value of this parameter.
Reserving a proper CIR margin can ensure the success rate of
Reason
allocation and handover.
Change take effect
Yes
Access
Read/Write
2-2999
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.41 Method for IFTA channel uplink power optimize

Full Name
Method for IFTA channel uplink power optimize
Abbreviated Name
UpPwrOptMethod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to optimize the uplink IFTA

channel power based on ordinary power optimization.
Instance
Cell
Related FG

Feature Guide
0..1
0: Not combine withordinary power optimize
1: Combine with ordinary power optimize
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The ordinary power optimization can avoid a too low power level
that affects the channel stability. Without the ordinary power

optimization, the initial power will be decreased even more. In this
case, you need to adjust this parameter based on the success rate
of allocation and handover, and the RQ indexes.
2-3000
SJ-20140527134815-013|2015-03-10(R1.1)
The power optimization based on the ordinary power optimization
Reason
can avoid unstable radio signals due to low level after optimization.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.66.42 Method for IFTA channel downlink power optimize

Full Name
Method for IFTA channel downlink power optimize
Abbreviated Name
DownPwrOptMethod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to optimize the IFTA channel

downlink power based on the ordinary power optimization.
Instance
Cell
Related FG

Feature Guide
0..1
0: Not combine withordinary power optimize
1: Combine with ordinary power optimize
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-3001
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
The ordinary power optimization can avoid a too low power level
that affects the channel stability. Without the ordinary power

optimization, the initial power will be decreased even more. In this
case, you need to adjust this parameter based on the success rate
of allocation and handover, and the RQ indexes.
The power optimization based on the ordinary power optimization
Reason
can avoid unstable radio signals due to low level after optimization.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.67 Cell IFTA Configuration(GCellIfta)

2.67.1 Cell IFTA Configuration ID
Full Name
Cell IFTA Configuration ID
Abbreviated Name
GCellIftaId
Managed Object
Cell IFTA Configuration(GCellIfta)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a cell IFTA configuration ID.
Instance
RNC
Related FG
N/A
2-3002
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Cell IFTA Configuration
N/A
2.67.2 TSCs Used by IFTA

Full Name
TSCs Used by IFTA
Abbreviated Name
TscForIfta
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the TSCs used by IFTA in this cell.
Instance
Cell
2-3003
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Feature Guide
0..1
0: No Used
1: Used
Unit
N/A
Default Value
[1,1,1,1,1,1,1,1]
Related Parameters
N/A
N/A
Parameters
Value Type
long[8]
Parameter Type
Negotiation With CN
No
Function Switch
No
When the CPU load is high, you can specify which TCSs can
be used for IFTA channels, to simplify the calculation process for

channel allocations, and decrease the CPU load. When the network
performance is deteriorated, you can improve it by limiting the
number of TSCs in a cell. Besides 8 TSCs, 2 TCSs are used in most
cases, and 1 TCS is used in some extreme cases.
The simulation proves that when 8 TCSs of a cell are both selected,
Reason
you can achieve more flexible channel allocations and better

network performances.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.67.3 Time of use last Measurement report

Full Name
Time of use last Measurement report

2-3004
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
UseLastMrNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of times for using the last
measurement value when the interference cell does not report any
measurement value.
Instance
Related FG
Cell
Feature Guide
1..255
Unit
N/A
Default Value
20
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In the low-speed scenario, you can increase the value of this
parameter. In the high-speed scenario, you can decrease it properly.
The default value is set to 20. It indicates that the radio quality will
Reason
not change within 20 measurement reports.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3005
SJ-20140527134815-013|2015-03-10(R1.1)
2.67.4 IFTA Channel Search Order

Full Name
IFTA Channel Search Order
Abbreviated Name
IftaSearchCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the searching order of IFTA channels.

Different searching orders are selected for the different cells to
reduce the conflicts.
Instance
Cell
Related FG

Feature Guide
0..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
For the cells that have strong interference and are close to each
other, you need to select different searching orders.
The default value is a kind of searching order. If you need a different
Reason
searching order, you can modify this parameter.
Change take effect
No
Access
Read/Write
OMC Access path

2-3006
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.201/V6.30.201
N/A
2.67.5 Interference Cell Average Window

Full Name
Interference Cell Average Window
Abbreviated Name
InterfcellWindow
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the window for calculating the average

interference cell level. If this parameter is not 1, it means the
neighbor cell interferences are calculated by using the average
value of multiple measurements.
Instance
Cell
Related FG

Feature Guide
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
You can adjust the value of this parameter to 2, 3, or other values
depending on the network performance.
The default value is set to 1, which means the latest measurement
Reason
value is selected to calculate the interference.
Change take effect
No
2-3007
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.67.6 IFTA Channel Priority

Full Name
IFTA Channel Priority
Abbreviated Name
IFTAPriority
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates IFTA channel preference, that is, find a

channel that meets the target CIR, or a channel with the highest or
lowest CIR from channels that meets the target CIR.
Instance
Cell
Related FG

Feature Guide
0..2
0: Use Enough CIR Channel
1: Prefer Minimum CIR channel
2: Prefer Maximum CIR channel
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-3008
SJ-20140527134815-013|2015-03-10(R1.1)
To reduce the CPU load and increase network performance, you
can decrease the value of this parameter properly. If the parameter

is set to 0, it is very good for reducing the CPU load.
If the frequency resource is sufficient, you can select the channel
Reason
with the highest CIR, which provides better network performance.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.67.7 DN of IftaMa for this cell

Full Name
DN of IftaMa for this cell
Abbreviated Name
refGBssIftaMa
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the IFTAMa DN for this cell.
Instance
Cell
Related FG

Feature Guide
N/A
Unit
N/A
Default Value
Related Parameters
R_BTS.FreqBand
A cell can only use the IFTAMa in the frequency band of this cell.
Parameters
Value Type
string
2-3009
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Negotiation With CN
No
Function Switch
No
When the IFTA function is enabled, a few frequencies are selected
for IFTA, and then configured to one or more IFTAMAs to be used for
cells. In most cases, a network is only configured with an IFTAMa.
Multiple IFTAMas also can be used, for example, three cells of a site
can use three IFTAMas.
The default cell is not configured with IFTA.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.67.8 Prefer IFTA channel

Full Name
Prefer IFTA channel
Abbreviated Name
IftaOrder
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to preferentially allocate IFTA

channels or non-IFTA channels when a cell allocates TCH channels.
Instance
Cell
Related FG

Feature Guide
0..1
Unit
N/A
2-3010
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If the non-IFTA channels are insufficient, you can modify this
parameter to 1, which means IFTA channels are allocated

preferentially.
The default value is set to 0. It means that the non-IFTA channel has
Reason
lower multiplexing rate, which means a better radio performance.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.67.9 Uplink Target CIR

Full Name
Uplink Target CIR
Abbreviated Name
UlTargetCIR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the target uplink CIR.

The element 0 to 6 corresponds to FR, EFR, HR, AMRFR, AMR HR,
and DATA respectively.
2-3011
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG

Feature Guide
0..63
0 : -5dB
1 : -4dB
2 : -3dB
61 : 56dB
62 : 57dB
63 : 58dB
Unit
N/A
Default Value
[15,15,18,9,15,15]
Related Parameters
UlMinCIR
The value of UlTargetCIR should be greater than that of UlMinCIR.
Parameters
Value Type
long[6]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured based on simulation data, combining
the statistics data of the network performance. If the value of

this parameter is increased, the congestions occur easily. If it is
decreased, the radio performance is poor.
Typical value
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3012
SJ-20140527134815-013|2015-03-10(R1.1)
2.67.10 Uplink Minimum CIR

Full Name
Uplink Minimum CIR
Abbreviated Name
UlMinCIR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum uplink CIR.

The element 0 to 6 corresponds to FR, EFR, HR, AMRFR, AMR HR,
and DATA respectively.
Instance
Related FG
Cell
Feature Guide
0..63
0 : -5dB
1 : -4dB
2 : -3dB
61 : 56dB
62 : 57dB
63 : 58dB
Unit
N/A
Default Value
[10,10,13,4,10,10]
Related Parameters
UlTargetCIR
The value of UlTargetCIR should be greater than that of UlMinCIR.
Parameters
Value Type
long[6]
Parameter Type
Negotiation With CN
No
Function Switch
No

2-3013
SJ-20140527134815-013|2015-03-10(R1.1)
Typical value
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.67.11 Downlink Target CIR

Full Name
Downlink Target CIR
Abbreviated Name
DlTargetCIR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the target downlink CIR.

BYTE[0] to BYTE[11] indicates six encoding modes: FR, EFR, HR,
AMR FR, AMRHR, and DATA, each of which includes two cases:
supporting SAIC and not supporting SAIC.
Instance
Cell
Related FG

Feature Guide
0..63
0 : -5dB
1 : -4dB
2 : -3dB
61 : 56dB
62 : 57dB
63 : 58dB
2-3014
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
[15,15,18,9,15,15,15,15,18,9,15,15]
Related Parameters
DlMinCIR
The value of DlTargetCIR should be greater than that of DlMinCIR.
Parameters
Value Type
long[12]
Parameter Type
Negotiation With CN
No
Function Switch
No

Typical value
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.67.12 Downlink Minimum CIR

Full Name
Downlink Minimum CIR
Abbreviated Name
DlMinCIR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-3015
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the minimum downlink CIR.

BYTE[0] to BYTE[11] indicates six encoding modes: FR, EFR, HR,
AMR FR, AMRHR, and DATA, each of which includes two cases:
supporting SAIC and not supporting SAIC.
Instance
Cell
Related FG

Feature Guide
0..63
0 : -5dB
1 : -4dB
2 : -3dB
61 : 56dB
62 : 57dB
63 : 58dB
Unit
N/A
Default Value
[10,10,13,4,10,10,10,10,13,4,10,10]
Related Parameters
DlTargetCIR
The value of DlTargetCIR should be greater than that of DlMinCIR.
Parameters
Value Type
long[12]
Parameter Type
Negotiation With CN
No
Function Switch
No

Typical value
Reason
Change take effect
No
Access
Read/Write
OMC Access path

2-3016
SJ-20140527134815-013|2015-03-10(R1.1)
V6.50.201/V6.30.201
N/A
2.67.13 Use IFTA

Full Name
Use IFTA
Abbreviated Name
UseIfta
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether to start IFTA

allocation in a cell. If the value is set to 1, the cell starts to allocate
IFTA channels; otherwise, no IFTA channels are allocated.
Instance
Related FG
Cell
Feature Guide
0..1
0: No Used
1: Used
Unit
N/A
Default Value
Related Parameters
R_BTSIFTA.IftaMaId
When UseIfta is set to 1, IftaMaId cannot be 0.
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Before the IFTA allocation starts, you can set the value of this
parameter to 0 to collect the interference data, and then set it to 1 to

start the IFTA allocation.
Before the IFTA allocation starts, you need to measure the historical
Reason
interference data.
Change take effect
2-3017
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.68 BSS IFTA MA Configuration(GBssIftaMa)

2.68.1 BSS IFTA Ma Configuration ID
Full Name
BSS IFTA Ma Configuration ID
Abbreviated Name
GBssIftaMaId
Managed Object
BSS IFTA MA Configuration(GBssIftaMa)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a BSS IFTA MA configuration ID.
Instance
RNC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-3018
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->BSS IFTA MA Configuration
N/A
2.68.2 Frequency Band of IftaMa

Full Name
Frequency Band of IftaMa
Abbreviated Name
FreqBand
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the frequency band that IFTAMA

frequencies belong to.
Instance
Related FG
BSC
Feature Guide
0..2,4,7
0: GSM900\(1..124\)(GSM900\(1..124\))
1: EGSM900\(0 .. 124,975 .. 1023\)(EGSM900\(0..124,975..1023\))
2: DCS1800\(512 .. 885\)(DCS1800\(512..885\))
4: PCS1900\(512 .. 810\)(PCS1900\(512..810\))
7: GSM850\(128..251\)(GSM850\(128..251\))
Unit
N/A
Default Value
2-3019
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
R_BSC.FuncExt
If R_BSC.FuncExt is 0, FreqBand cannot be set to 1900 MHz. If
Parameters
R_BSC.FuncExt is 1, FreqBand cannot be set to 1800 MHz.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured in accordance with the frequency band
that the IFTAMA frequencies belong, depending on the operator's

frequency resources and data planning.
GSM 900M is a frequency band mostly used.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.68.3 Frequency hopping

Full Name
Frequency hopping
Abbreviated Name
Freqhop
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether the IFTAMa use no frequency

hopping or cyclic hopping.
Instance
Cell
2-3020
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG

Feature Guide
0..1
0: no hopping
1: cycle hopping
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
In most cases, frequency hopping is used. You can choose to not
use frequency hopping if the frequency resource is sufficient, to

achieve a better radio performance.
Frequency hopping can average the interference, by which you can
Reason
achieve a better performance when the number of frequencies is

small.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.68.4 Frequency List

Full Name
Frequency List
Abbreviated Name
MaArfcnList
Managed Object

2-3021
SJ-20140527134815-013|2015-03-10(R1.1)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a frequency list that consists of a set of

frequencies in a same frequency band, which are used for IFTA.
Instance
Cell
Related FG

Feature Guide
0..1023
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long[16]
Parameter Type
Negotiation With CN
No
Function Switch
No
The more frequencies, the better performance is provided.
This parameter has no default value. It contains the frequencies
Reason
used for IFTA.
Change take effect
Yes
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3022
SJ-20140527134815-013|2015-03-10(R1.1)
2.69 Share Area Configuration(GMocnArea)

2.69.1 Share Area ID
Full Name
Share Area ID
Abbreviated Name
GMocnAreaId
Managed Object
Share Area Configuration(GMocnArea)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a sharing area ID.
Instance
RNC
Related FG
N/A
1..20
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Share Area Configuration
2-3023
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.69.2 Mocn Area Attribute

Full Name
Mocn Area Attribute
Abbreviated Name
MocnAreaAttr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the attribute of an MOCN shared area. It

indicates whether the MOCN shared area is in this BSC or other
BSCs.
Instance
LAC
Related FG
0..1
0: Share Area of Self BSC
1: Share Area of Other BSC
Unit
N/A
Default Value
Related Parameters
R_MPLMN.MSCNRILen,R_MPLMN.SGSNNRILen
R_MOCNAREA.DistributeRatio
R_LAIMOCN.MCC,R_LAIMOCN.MNC,R_LAIMOCN.LAC
If the shared area is in this BSC (MocnAreaAttr is 0), the involved
Parameters
operators must have the same NRI length.

If MocnAreaAttr is 1, DistributeRatio must be filled with 0XFF.
Among R_LAIMOCN, the LAI added into the shared area from the
PlmnGroup is the external LAI. The internal LAI should have the
consistent attributes specified by MocnAreaAttr.
The LAIs (generated by MCC+MNC+LAC) in the shared area are
not repeated with that in the non-shared area.
The CommonMCC and CommonMNC fields are not displayed
on the OMM. In the shared area in this BSC generated from
the R_LAIMOCNARE list, only the operators in this BSC can be
selected. In the shared area in other BSCs, all the operators can be
selected. The available operators are listed on the top of the list.
2-3024
SJ-20140527134815-013|2015-03-10(R1.1)
In the shared area, the sum of DistributeRatio of operators must be

100 (except the invalid operator). A shared area should have at
least one shared operator.
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The shared areas in this BSC are most important and should be
Reason
configured because they are used for service allocations. The

shared areas in other BSCs should be also configured because they
are used for controlling handover areas.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.69.3 PlmnGroup DN
Full Name
PlmnGroup DN
Abbreviated Name
refPlmnGroup
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a referred PlmnGroup DN, that is, the

PLMN in the shared area.
Instance
Cell
Related FG

2-3025
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string[4]
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.69.4 GPLMN DN
Full Name
GPLMN DN
Abbreviated Name
refGMPlmn
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a referred GPLMN DN, that is, the PLMN
in the internal shared area.
2-3026
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
Cell
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
string[4]
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.69.5 Service Distribute Ratio

Full Name
Service Distribute Ratio
Abbreviated Name
DistributeRatio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-3027
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates the service distribution ratio of shared

operators. It should be configured based on the distribution ratio of
actual services. The default value is rarely used.
Instance
Cell
Related FG
{MocnAreaAttr==0}[0..100],
{MocnAreaAttr==1}[255]
Unit
N/A
Default Value
{MocnAreaAttr==0}25,25,25,25,
{MocnAreaAttr==1}255,255,255,255
Related Parameters
N/A
Under the same MOCNAREA, the sum of distribution ratio of all the
Parameters
operators should be 100.
Value Type
long[4]
Parameter Type
Negotiation With CN
No
Function Switch
No
To allocate more services for an operator than the others, you
can increase the value of this parameter based on the operator's

requirements.
It should be configured based on the distribution ratio of actual
Reason
services. The default value is rarely used.
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3028
SJ-20140527134815-013|2015-03-10(R1.1)
2.70 BSC User Plane Reserved

Configuration(GBssFunctionUpRsv)
Full Name
Abbreviated Name
reserved1
Managed Object
BSC User Plane Reserved Configuration(GBssFunctionUpRsv)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates parameter 1 reserved for the user plane.
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
2-3029
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Information Configuration->BSC User Plane Reserved Configuration
V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
0
2-3030
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
0
2-3031
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
2-3032
SJ-20140527134815-013|2015-03-10(R1.1)
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
2-3033
SJ-20140527134815-013|2015-03-10(R1.1)
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
2-3034
SJ-20140527134815-013|2015-03-10(R1.1)
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
2-3035
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-3036
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved9
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-3037
SJ-20140527134815-013|2015-03-10(R1.1)
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
2-3038
SJ-20140527134815-013|2015-03-10(R1.1)
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved11
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
2-3039
SJ-20140527134815-013|2015-03-10(R1.1)
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved12
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-3040
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved13
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
2-3041
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved14
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
0
2-3042
SJ-20140527134815-013|2015-03-10(R1.1)
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved15
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
2-3043
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved16
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
N/A
2-3044
SJ-20140527134815-013|2015-03-10(R1.1)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved17
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
Related FG
N/A
2-3045
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved18
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
2-3046
SJ-20140527134815-013|2015-03-10(R1.1)
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved19
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

2-3047
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A

Full Name
Abbreviated Name
reserved20
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-3048
SJ-20140527134815-013|2015-03-10(R1.1)
Description
Instance
BSC
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2.71 Cell User Plane Reserved

Configuration(GCellUpRsv)
2.71.1 Cell User Plane Reserved Configuration ID
Full Name
Cell User Plane Reserved Configuration ID
2-3049
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
GCellUpRsvId
Managed Object
Cell User Plane Reserved Configuration(GCellUpRsv)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a reserved cell user-plane configuration ID.
Instance
RNC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->Cell User Plane Reserved Configuration
N/A

2-3050
SJ-20140527134815-013|2015-03-10(R1.1)
Full Name
Abbreviated Name
reserved1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the Cell Reserved Parameter 1.
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3051
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3052
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3053
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3054
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3055
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3056
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3057
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3058
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved9
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3059
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3060
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved11
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3061
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved12
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3062
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved13
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3063
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved14
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3064
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved15
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3065
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved16
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3066
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved17
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3067
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved18
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3068
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved19
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3069
SJ-20140527134815-013|2015-03-10(R1.1)

Full Name
Abbreviated Name
reserved20
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
Related FG
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change take effect
No
Access
Read/Write
OMC Access path

V6.50.201/V6.30.201
N/A
2-3070
SJ-20140527134815-013|2015-03-10(R1.1)
2.72 Dynamic Power Share(GDynPwShare)

2.72.1 Dynamic Power Share ID
Full Name
Dynamic Power Share ID
Abbreviated Name
GDynPwShareId
Managed Object
Dynamic Power Share(GDynPwShare)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a power sharing ID.
Instance
BSC
Related FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Value Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change take effect
Unmodifiable
No
Access
Restricted
OMC Access path

Information Configuration->GSM Cell Configuration->Dynamic
Power Share
2-3071
SJ-20140527134815-013|2015-03-10(R1.1)
N/A
2.72.2 Support dynamic power share

Full Name
Support dynamic power share
Abbreviated Name
DynPwrShareSupp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the dynamic power sharing

feature is enabled.
If the total power of a multicarrier RRU keeps unchanged, the
dynamic power sharing feature can be used to increase the
maximum downlink power of a single carrier to a value higher than
the average maximum power.
Instance
cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
PwrControlDl
If the downlink power control switch (PwrControlDl) of a sub-cell is
Parameters
disabled, dynamic power sharing cannot be enabled too.

Dynamic power sharing is not available for non-SDR base stations.
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-3072
SJ-20140527134815-013|2015-03-10(R1.1)
This feature can improve the power utilization in a base station by
distributing the surplus power of carriers with low transmit power to

the carriers requiring high transmit power. In this way, the maximum
transmit power of each carrier can be increased. Some users close
to the base station need lower power while those far away from the
base station need higher power. Not all users need the maximum
power. In this case, this feature can be used. Generally, this
feature is applied for enhancing coverage with the same carriers or
increasing the number of carriers with the same coverage.
Dynamic power sharing is only applicable to special scenarios.
Reason
Change take effect
No
Access
Read/Write
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2.72.3 Power promote level for power sharing

Full Name
Power promote level for power sharing
Abbreviated Name
PwrPromoteLevel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum amount of power by which

the power of each carrier can be increased through dynamic power
sharing.
Instance
cell
Related FG
2-3073
SJ-20140527134815-013|2015-03-10(R1.1)
1: 0.5dB
2: 1dB
3: 1.5dB
4: 2dB
5: 2.5dB
6: 3Db
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to a larger value if more carriers are
available and more power can be shared. Otherwise, this parameter

must be set to a smaller value. If a larger value is set, the power
increase is obvious but the probability of channel allocation failures
due to insufficient power also increases.
By default, this parameter is set to an intermediate value. This
Reason
parameter can be modified as needed.
Change take effect
No
Access
Read/Write
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2.72.4 Power promote for performance optimize

Full Name
Power promote for performance optimize

2-3074
SJ-20140527134815-013|2015-03-10(R1.1)
Abbreviated Name
PwrPromoteForOpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether power increase is allowed for

performance improvement.
If this switch is enabled, the BTS can distribute the surplus power
to UEs with poor signal quality, whose downlink power needs to
be increased. These UEs return the surplus power immediately if
other UEs need power.
Instance
cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Generally, this feature can be used to improve network performance.
However, a power increase can cause more interference, which may

have negative impact on network performance in certain situations.
Therefore, network performance indicators must be observed when
this feature is enabled.
This function is disabled by default. It can be enabled as needed.
Reason
Change take effect
No
Access
Read/Write
2-3075
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2.72.5 Power promote level for performance optimize

Full Name
Power promote level for performance optimize
Abbreviated Name
PwrPromoteLevForOpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum amount of power by which

the power can be increased for performance improvement.
Instance
cell
Related FG
1: 0.5dB
2: 1dB
3: 1.5dB
4: 2dB
5: 2.5dB
6: 3Db
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-3076
SJ-20140527134815-013|2015-03-10(R1.1)
If the power of a user is increased by a larger amount, the service
of this user can be well maintained. However, the power increase

causes greater interference on the other users. If this parameter
is set to a large value, network performance indicators must be
observed. Generally, this parameter can be set to a larger value
if channel occupancy is low or a lot of carriers are available with
sufficient power.
By default, this parameter is set to an intermediate value. This
Reason
parameter can be modified as needed.
Change take effect
No
Access
Read/Write
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2.72.6 Increase 8Psk Power

Full Name
Increase 8Psk Power
Abbreviated Name
Inc8PskPwr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-3077
SJ-20140527134815-013|2015-03-10(R1.1)
Description
This parameter indicates whether power increase for 8PSK is

allowed.
Generally, a reduction is required for the transmit power of a carrier
to obtain a peak power lower than or equal to the maximum power
of the carrier because the peak power in case of 8PSK is high. If
this switch is enabled, the hardware capability and surplus burst
power in the RRU can be fully used to prevent reduction of the
8PSK power. If power reduction occurs, the power is increased
by 2 dB. This parameter is sent to SDR. The RRU implements the
8PSK power increase.
Instance
cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The power increase for 8PSK can improve the performance of PS
services and increase the proportion of high-order encoding rate in

a single cell. However, the power increase can cause interference
on the other cells and CS services from the perspective of the entire
network. This feature can be tried to improve network performance.
If the feature is enabled, network performance indicators must be
observed.
This function is disabled by default. It can be enabled as needed.
Reason
Change take effect
No
Access
Read/Write
2-3078
SJ-20140527134815-013|2015-03-10(R1.1)
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2.72.7 Power Warning Threshold

Full Name
Power Warning Threshold
Abbreviated Name
PwrWarningThs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold that determines whether a

low transmit power warning message is sent to the BSC. In case of
power sharing, if the power of a timeslot or sub-timeslot in the RRU
is lower than this threshold, the SDR sends a low transmit power
warning message containing the surplus power to the BSC. When
assigning a channel in this timeslot or sub-timeslot for a newly
accessed UE, the BSC checks whether the surplus power meets
the requirement of the UE. The unit of this threshold is represented
as 10% of the carrier power.
Instance
cell
Related FG
1..20
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-3079
SJ-20140527134815-013|2015-03-10(R1.1)
This parameter can be set to a larger value if a lot of channel
activation failures occur due to insufficient power.
Generally, the surplus power in a timeslot or sub-timeslot is not
Reason
lower than the maximum power of a carrier. The default value is set
to ensure sufficient power of a newly allocated channel.
Change take effect
No
Access
Read/Write
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2.72.8 Decrease power consume by handover

Full Name
Decrease power consume by handover
Abbreviated Name
DecPwrConsumebyHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a handover can be performed to

reduce the power consumption of a timeslot or sub-timeslot. If this
switch is enabled, and the SDR detects a power increase failure due
to low power P times (PwrCannotIncP) within N (PwrCannotIncN)
successive power increase decisions, the SDR sends a message
to the BSC and then the BSC attempts to hand over the UE in the
timeslot or sub-timeslot to another timeslot or sub-timeslot.
Instance
cell
Related FG
0: No
1: Yes
Unit
N/A
2-3080
SJ-20140527134815-013|2015-03-10(R1.1)
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This feature is generally enabled during power sharing. The
parameters PwrCannotIncN and PwrCannotIncP must be properly

set for this feature.
This feature is generally enabled during power sharing to achieve
Reason
power balancing among timeslots through handover.
Change take effect
No
Access
Read/Write
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2.72.9 N value of power Cannot Increase

Full Name
N value of power Cannot Increase
Abbreviated Name
PwrCannotIncN
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of N that is used to determine an

outgoing handover on a UE in a timeslot or sub-timeslot. Refer to
DecPwrConsumebyHo.
2-3081
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
cell
Related FG
1..100
Unit
N/A
Default Value
Related Parameters
PwrCannotIncP
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
If PwrCannotIncN and PwrCannotIncP are set to small values, a
power control decision is made more quickly but the decision is

less reliable. If PwrCannotIncN and PwrCannotIncP are set to
large values, a power control decision is made more slowly but the
decision is more reliable.
Generally, the power is determined as insufficient if power increase
Reason
fails three times due to insufficient power within four successive

power control decisions.
Change take effect
No
Access
Read/Write
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2.72.10 P value of power Cannot Increase

Full Name
P value of power Cannot Increase
Abbreviated Name
PwrCannotIncP
2-3082
SJ-20140527134815-013|2015-03-10(R1.1)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of P that is used to determine an

outgoing handover on a UE in a timeslot or sub-timeslot. Refer to
DecPwrConsumebyHo.
Instance
cell
Related FG
1..100
Unit
N/A
Default Value
Related Parameters
PwrCannotIncN
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
If PwrCannotIncN and PwrCannotIncP are set to small values, a
power control decision is made more quickly but the decision is

less reliable. If PwrCannotIncN and PwrCannotIncP are set to
large values, a power control decision is made more slowly but the
decision is more reliable.
Generally, the power is determined as insufficient if power increase
Reason
fails three times due to insufficient power within four successive

power control decisions.
Change take effect
No
Access
Read/Write
OMC Access path

Power Share
V6.50.202/V6.30.202
2-3083
SJ-20140527134815-013|2015-03-10(R1.1)
ADD
2.72.11 Power ratio for dynamic halfrate

Full Name
Power ratio for dynamic halfrate
Abbreviated Name
PwrRatioForDynHr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
A channel is determined as a channel with enough power if the

proportion of available power on the channel reaches the power ratio
specified by this parameter. If the proportion of available power is
lower than this ratio, the channel is deemed as an occupied channel
when the channel occupancy is calculated. If this parameter is set
to an appropriate value, dynamic HR allocation can be initiated
earlier during power sharing to prevent traffic congestion caused by
insufficient power.
Instance
cell
Related FG
0..100
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
If the parameter is too small, HR allocation cannot be initiated
timely and traffic congestion may occur due to insufficient power.

If the parameter is too large, unnecessary HR allocation may be
performed, which results in degradation of call quality.
2-3084
SJ-20140527134815-013|2015-03-10(R1.1)
The default value is set to 0, which is the same as that in the
Reason
previous version. If the value is set to 0, the power of a channel

is not considered. This parameter can be set to non-zero value
as needed.
Change take effect
No
Access
Read/Write
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2.72.12 Power Warning report period

Full Name
Power Warning report period
Abbreviated Name
PwrWarningtPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
After the SDR reports a warning message upon detecting low power
in a timeslot or sub-timeslot, the SDR reports the warning message
periodically according to the time period specified by this parameter
if the low power persists.
Instance
cell
Related FG
1..200
Unit
100ms
Default Value
20
Related Parameters
N/A
N/A
Parameters
2-3085
SJ-20140527134815-013|2015-03-10(R1.1)
Value Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter can be set to a smaller value if timely reporting of
surplus power is required. This parameter can be set to a larger

value if the number of messages needs to be reduced.
The default value is set to two seconds so that the SDR can timely
Reason
inform the BSC of the change of surplus power.
Change take effect
No
Access
Read/Write
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2.72.13 Use Downlink minimum level

Full Name
Use Downlink minimum level
Abbreviated Name
UseDlMinLevel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum downlink level is used. If

this switch is enabled during power sharing, the BSC calculates
the minimum downlink transmit power according to this minimum
downlink level and sends the calculated transmit power to the
SDR through a channel activation message. If the SDR fails to
activate a channel due to insufficient power, the SDR can activate
the channel with the minimum transmit power so that the ratio of
channel activation failures due to insufficient power can be reduced.
2-3086
SJ-20140527134815-013|2015-03-10(R1.1)
Instance
cell
Related FG
0: No
1: Yes
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Value Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This switch can be enabled during power sharing if the number of
CS channel activation failures due to insufficient power reaches

a threshold. After this switch is enabled, network performance
indicators must be observed.
This switch is disabled by default because using the minimum level
Reason
has impact on radio performance.
Change take effect
No
Access
Read/Write
OMC Access path

Power Share
V6.50.202/V6.30.202
ADD
2-3087
SJ-20140527134815-013|2015-03-10(R1.1)

SJ-20140527134815-013-ZXG10 iBSC (V6.30.202) Radio Parameters Reference PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SJ-20140527134815-013-ZXG10 iBSC (V6.30.202) Radio Parameters Reference PDF

Uploaded by

Copyright:

Available Formats

ZXG10 iBSC

Base Station Controller

Radio Parameters Reference

Additionally, the contents of this document are protected by

contractual confidentiality obligations.

Updated to V6.30.202f. For details, refer to the relevant release

Serial Number: SJ-20140527134815-013

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.1.66 If get Utran classmark information from UE ............................................ 2-83

ZTE Proprietary and Confidential

2.1.103 MS capability pairing priority 5 ............................................................2-126

ZTE Proprietary and Confidential

2.2.25 TBF release timer................................................................................2-173

ZTE Proprietary and Confidential

2.2.61 Handover protecting timer to WCDMA/FDD...........................................2-222

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.5.10 Preemption duration when handover.....................................................2-304

ZTE Proprietary and Confidential

2.6.27 LLC Transfer for SAPI3(User-Data) ......................................................2-351

ZTE Proprietary and Confidential

2.6.62 Enable PCU resource alarm.................................................................2-396

ZTE Proprietary and Confidential

2.7.5 Measurement NRT Load Threshold 1 .....................................................2-439

ZTE Proprietary and Confidential

2.9.13 Global Reserved Parameter 13 ............................................................2-479

ZTE Proprietary and Confidential

2.10.29 HSC exist in transfer ..........................................................................2-525

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.15.4 Cs Remained User Num Medium Threshold..........................................2-602

ZTE Proprietary and Confidential

2.17.6 MIN received signal level to access ......................................................2-643

ZTE Proprietary and Confidential

2.17.43 Cipher mode priority 3........................................................................2-696

ZTE Proprietary and Confidential

2.17.80 Access class parameter config select..................................................2-742

ZTE Proprietary and Confidential

2.17.117 Receiving level threshold..................................................................2-792

ZTE Proprietary and Confidential

2.17.154 Altitude ...........................................................................................2-837

ZTE Proprietary and Confidential

2.17.191 MOS optimizing in handover procedure.............................................2-879

ZTE Proprietary and Confidential

2.21.1 AMR Configuration ID ..........................................................................2-919

ZTE Proprietary and Confidential

2.21.38 Hysteresis of AMR HR 2 ....................................................................2-969

ZTE Proprietary and Confidential

timeout for AMR-WB OWFS

ZTE Proprietary and Confidential

2.24.19 Uplink receive level of intra-ho Threshold ..........................................2-1063

ZTE Proprietary and Confidential

2.24.52 Allow level handover in downlink(High Speed)................................... 2-1109

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.24.115 DCS1800 frequency band permitted on traffic HO ............................ 2-1185

ZTE Proprietary and Confidential

2.24.150 Interference band requirement for intracell handover caused by

ZTE Proprietary and Confidential

2.24.184 HoAccess Require CI ....................................................................2-1274

ZTE Proprietary and Confidential