Professional Documents
Culture Documents
Network Setup About DVR 3657X: Router 1 Router 2 Internet
Network Setup About DVR 3657X: Router 1 Router 2 Internet
Network Setup About DVR 3657X: Router 1 Router 2 Internet
1 Hardware install
internet
Router 1
DVR
PC 1
Router 2
PC 2
Select Static IP type, Set ip address, gateway, port, as shown in Figure. Then
write down the port and IP, after the routing settings need these
3 Configure Router
Access to the router 1 on the PC 1
Open IE browser and input IP address 192.168.1.1 into D-LINK Router.
Into the router's virtual server interface, here we need to port mapping. Such
as mapping port 8090, we need to set up as shown in Figure
So we have completed the router settings, we can access the dvr on the
Internet. Now we need to know the router 1's WAN IP, if the WAN IP is
221.222.223.224, we can use this IP to access the dvr.
4 IE Browser
At first please turn all the Active X option ON at IE Internet safety setup.
Select menu setup to enable the Active X option.
Network module use Active X applet to display remote image. Any web
browser with Active X support can connect to DVR.
Click Start Program Internet Explorer Tools Internet
Options.
Now open IE browser in the address bar enter the IP and wep port,
http://221.222.223.224:8090. In connection dvr, the browser will be prompted
to download Active X control, select OK. Then be able to log into the recorder
window
Note:
1. DVRs IP type must be static
2. DVRs IP need to meet the router's LAN IP
3. DVRs gateway must be the same with the router's LAN IP
4. All ports must be mapped
5. In the IE browser to access the wep port must be added