Professional Documents
Culture Documents
Act
Act
General Information
The Reading section of the ACT compels you to rely on the text given and use your own powers of
deduction and reasoning to determine the answers to questions. Though questions may differ, the
most common provides you with a text or paragraph that must be analyzed through a series of
questions, checking for reading comprehension, information retention, and basic knowledge of terms
related to literature and reading. The test consists of 40 multiple-choice questions, each of them
related in some way to the process of reading or reading comprehension. When taking the test, it is
best to first read the questions assigned to the passage, followed by the passage. This way, you can
determine key points in the passage and save time searching for answers.
Types of Comprehension
Literal or Explicit
Literal or explicit comprehension requires you to synthesize information overtly stated in a text. This
requires being capable of finding information in a work and understanding given information, whether
it is written or provided in graphs and other charts.
Implied or Implicit
Implied and implicit comprehension require you to be able to go one step further; rather than simply
finding information and repeating it, implied or implicit information requires you to take the
information given, and determine your own conclusions based on the information provided.
you are seeking the answer to why did this event happen? From there, you may be required to
locate additional effects of the single cause, or subsequent effects from the first effect (known as the
domino effect).
Form Generalizations
Forming generalizations requires developing a statement about a group that is true of most of that
group (though not necessarily all). To create a generalization, you must gather a few things:
supporting facts, examples, past experience, and logic/reasoning. For instance, you might look at
cats and say your own cat loves playing with yarn. Your aunts cat loves playing with yarn. Cats are
often depicted as playing with a ball of yarn. From there, you can successfully make the
generalization that cats like to play with yarn.
Pre-Algebra
Basic Operations with:
Whole Numbers
When a number has no decimal or fractional part, it is a whole number. Whole numbers are used for
counting and representing quantity. They can be added, subtracted, multiplied and divided.
To add or subtract whole numbers, simply align the digits according to their place value and proceed
with addition or subtraction as usual. In addition, the numbers to be added are called addends, and
the result of the operation is the sum. In subtraction, the first number is the minuend and the number
to be subtracted is called the subtrahend. The result of the operation is called the difference.
Multiplication is simply repeated addition. When multiplying two multiple-digit numbers, multiply the
first number with each digit of the second number. The first number is the multiplicand, while the
second is the multiplier. Both numbers to be multiplied are called factors, and the result of
multiplication is the product.
Division is repeated subtraction or the inverse of multiplication. In 459=5459=5, we call 45 the
dividend, 9 the divisor, and 5 the quotient.
Fractions
A fraction represents the value of a thing as a part of a whole. If we say 112112 of a dozen eggs, we
are referring to 1 egg being part of 12 eggs.
Decimals
A decimal is another way of representing a part of a whole. The fraction 1515, for instance, can be
written as 0.2 in the decimal form. It is easy to convert a fraction to its decimal form: simply divide
the numerator by the denominator.
On the number line, decimals are the numbers located between whole numbers. The number 0.2 is
located 1515of the way between 0 and 1.
Integers
Integers are all of the whole numbers on the number line, including negative whole numbers, zero,
and positive whole numbers.
Addition: When the addends have like signs, add the integers as usual and copy their
common sign. When the signs are different, subtract the integers and copy the sign of the
bigger integer.
Subtraction: Change the sign of the subtrahend and proceed to algebraic addition.
Multiplication and Division: Multiplication and division of integers with like sign will result in a
positive value. Multiplication and division of integers with unlike signs will result in a negative
value.
Place Value
Numbers are made of digits, which can be any of the numbers from 0 to 9. These digits each have
different values, depending on their location in the number. The digit 4 in the number 432 has a
different value as the same digit 4 in the number 102.45. In 432, its value is 400 (or 4 hundreds),
while in 102.45, its value is 0.4 (or 4 tenths).
To the left of the decimal point, the place value increases, e.g.: ones, tens, hundreds, thousands, ten
thousands, and so on. To the right of the decimal point, the place value decreases, e.g.: tenths,
hundredths, thousandths, ten thousandths, and so on.
Exponents
Exponents are also called powers or indices. They can be positive, negative, or even fractions.
A positive exponent indicates how many times a number or base is multiplied by itself.
93=999=72993=999=729
A negative exponent indicates how many times 1 is divided by the number:
93=1333=172993=1333=1729
A fractional exponent, 1n1n, indicates taking the nth root of that number.
2713=273=3
Scientific Notation
Scientific notation is a special way of writing very large or very small numbers. It is also called the
standard form or standard index form. The rule is to write a number in two parts:
Write the digits first and place the decimal point after the first digit. Add x 10 to a certain power. The
power is the number of places that the decimal was moved to its present position. The power is
positive if the decimal was moved to the left, and negative if it was moved to the right.
Example:
Convert 123,456,789 into a scientific notation.
The correct answer is:
1.23456789x1081.23456789x108
Factors
Two numbers are the factors of their product; such as 3 and 5 are the factors of 15. A number can
have several pairs of factors. For instance, the factors of 45 are 5, 9, 3, and 15. It is also correct to
say that 45 is a multiple of any of its factors.
The terms in a linear equation with one variable have exponents of 0 or 1. There will be no fractional
powers or powers greater than 1. To solve an equation of this type involves simply isolating the
variable to one side of the equation and evaluating the constant terms.
|a|0|a|0
The following properties are also useful in solving problems involving absolute values:
|a|=a2|a|=a2
|ab|=|a||b| |ab|=|a||b|
Another property of absolute values commonly used in algebra is given by:
|u|=a|u|=a
Example: Solve for y in |y+17|=20|y+17|=20
y+17=20y+17=20
y=2017=3y=2017=3
And
y=2017=37y=2017=37
When absolute values are mixed with inequalities, it gets a little bit trickier. Heres an example to
illustrate:
Find the values of x if: |x|<10|x|<10
This means that the distance of x is from 0, less than 10, and that x is any value within the interval (10, 10) but excluding -10 and 10.
Ordering the values of x, we write it as:
10<x<1010<x<10
(There is more about this concept under the Intermediate Algebra heading.)
Probability=16=16Probability=16=16
Elementary Algebra
Properties of Exponents and Square Roots
Here are some properties of exponents commonly used in algebra:
aman=am+naman=am+n
aman=amnaman=amn
(am)n=a(mn)(am)n=a(mn)
am=1amam=1am
amn=amnamn=amn
ab=abab=ab
ab=abab=ab
a=a12a=a12
an=a1nan=a1n
Familiarity with these properties will come in handy when simplifying radicals.
Example:
259=?259=?
259=53259=53
52+(35)=4052+(35)=40
Operations in Algebra
The operations in algebra involve solving equalities and inequalities, working with exponents and
roots, factoring and simplifying, solving polynomials, linear and quadratic equations, and dealing with
functions, word problems and many other concepts.
One way to solve or find the roots (or zeroes) of a quadratic equation is by factoring.
Factor x29x+20=0x29x+20=0
In the equation and referring to the standard form, a=1a=1, b=9b=9, and c=20c=20.
What pair of numbers will give you acac when multiplied together, and give you bb when
added? ac=20ac=20and b=9b=9. By intelligent guesswork and lots of practice, you will get
the numbers -4 and -5, which when multiplied give 20 and when added give -9.
These numbers give you the factors: (x4)(x4) and (x5)(x5). Equating them to zero, you find
the roots or zeroes of the equation to be x=4x=4 and x=5x=5.
Intermediate Algebra
The Quadratic Formula
Some quadratic equations are not as easily solved by factoring, and x can be solved using the
quadratic formula which is given as:
x=bb24ac2awhenax2+bx+c=0x=bb24ac2awhenax2+bx+c=0
Solving quadratic equations will yield any of these results:
2 solutions - when the value of b24acb24ac (called the discriminant) is positive; the graph
(which is a parabola) touches the x-axis at two points.
1 solution - when the discriminant is equal to zero; the graph touches the x-axis once (at the vertex
of the parabola).
2 complex solutions (no real solutions) - when the discriminant is negative; the graph does not touch
the x-axis.
5x+55x+5
x2+5x+6x2+2x3x2+5x+6x2+2x3
There is often a need to simplify rational expressions, and factoring is a very useful technique. The
second example, for instance, can easily be simplified by factoring:
x2+5x+6x2+2x3x2+5x+6x2+2x3
(x+2)(x+3)(x1)(x+3)(x+2)(x+3)(x1)(x+3)
The factor of (x+3)(x+3) is common in both the numerator and denominator, and cancels out,
leaving the simplified rational expression of:
x+2x1x+2x1
Polynomials with terms raised to fractional exponents are radical expressions. Knowing how to work
with the radicals makes it easier to solve most equations of this type.
To get rid of a square root, cube root or nth root of a term, simply square, cube, or raise it to the nth
power. In equations, keep the balance by raising the terms on both sides of the equation to the
appropriate power.
Examples:
Remove the radical in the given equation:
6x5=56x5=5
(6x5)2=52(6x5)2=52
$6x5=25$6x5=25
Find x in the equation given below:
x+24=3x+24=3
(x+2)14=3(x+2)14=3
([x+2]14)4=34([x+2]14)4=34
x+2=81x+2=81
x=79x=79
When you come across expressions with radical denominators, there will be a need to rationalize
denominators containing radicals to arrive at the simplest form of your answer. To do that, multiply
the numerator and the denominator with the conjugate of the radical expression. Lets try an
example:
Rationalize: 732732
7(3+2)(32)(3+2)7(3+2)(32)(3+2)
21+7292=21+727=3+221+7292=21+727=3+2
|5x14|=8|5x14|=8
5x14=85x14=8
|y6|<5|y6|<5
5<y6<55<y6<5
1<y<11
an=a1+(n1)dan=a1+(n1)d
Example: Predict the 12th term in the sample sequence above:
a12=5+(121)15a12=5+(121)15
a12=170a12=170
The sum of an arithmetic sequence with n terms, designated as snsn, is given by this formula:
sn=n(a1+an)2sn=n(a1+an)2
Example: Using the sample sequence above:
s12=12(5+170)2s12=12(5+170)2
s12=1050s12=1050
A series is said to be a geometric sequence if the ratio between two consecutive terms is the same
for all consecutive terms in the series.
If a1a1 is the first term, a2a2 is the second term, and anan is the nth term, the common ratio can be
shown as:
r=a2a1=ana(n1)r=a2a1=ana(n1)
The term anan in a geometric sequence can be predicted using the formula:
an=a1rn1an=a1rn1
The sum of a geometric sequence with n terms, designated as snsn is determined using this
formula:
sn=a1(1rn)arsn=a1(1rn)ar
Systems of Equations
Systems of equations exist if there are two or more equations given in relation to each other. A
system of two linear equations written with two unknown variables can result in 1 solution, infinite
solutions, or no solutions.
Graphically, a system that has 1 solution will show 1 point where the given equations meet or
intersect. A system that has infinite solutions involves two (or more equations), one of which is a
multiple of the other. A system that has no solution will show lines that do not intersect each other.
To solve for the unknown values in a system of equations is the same as finding the point where
both lines meet. There are 3 methods to do this by substitution, elimination, or graphing and it is
to your advantage to be familiar with all three. Some systems are easier solved using a particular
method.
The Substitution Method:
1. Write the first equation in terms of one variable, say x. TIP: choose the simpler or shorter
equation.
2. Substitute the result from step 1 to the second equation. You will now have an equation
expressed in the xvariable. Solve for x.
3. Use the value of x derived from step 2, and plug it into any of the equations to solve for the other
variable, y.
1. Inspect the equations to find how they can be combined to eliminate one variable. Take as an
example these two equations: 5x3=5y5x3=5y and x+6y=2x+6y=2.
We can multiply the second equation by 5:
5(x+6y)=525(x+6y)=52
5x+30y=105x+30y=10
Subtracting the new equation from the first equation to eliminate 5x results in:
35y=735y=7
2. From the resulting equation with only 1 variable now, we then solve the value for that variable:
y=735=15y=735=15
3. Use that value, plug it to any of the equations and solve for the other variable, x.
Quadratic Inequalities
An inequality that has a second-degree polynomial is a quadratic inequality. It can be written in a
form similar to the standard form for quadratic equations, but with signs of inequality:
ax2+bx+c>0ax2+bx+c>0
ax2+bx+c0ax2+bx+c0
ax2+bx+c<0ax2+bx+c<0
ax2+bx+c0ax2+bx+c0
Where a, b, and c are real numbers and a is not equal to 0.
While quadratic equations have roots as solutions, quadratic inequalities have intervals or solution
sets. The following is a simple method of solving a quadratic inequality:
1. Write the corresponding quadratic equation of the given inequality. For example, the
corresponding quadratic equation of x2+5x+6>0x2+5x+6>0 is x2+5x+6=0x2+5x+6=0.
2. Find the roots of that equality. In this case, the roots of the quadratic equation are -3 and -2.
3. Plot the points on the number line. You will find 3 intervals which are possible solution sets
for the given inequality. In this example, these are the intervals:
<x<3<x<3
3<x<23<x<2
2<x<+2<x<+
4. Test each of these intervals and find out which intervals will make the inequality true. Take a
number from each interval and plug it into the quadratic inequality. If the result makes a true
statement, then the interval is a solution set. If the result makes a false statement, the
interval is not part of the solution set.
From the first interval, take a random value of x=4x=4. Plug it into the quadratic inequality, and
you get a resulting statement of 10>010>0 which is true. This means that <x<3<x<3 is
part of the solution set.
From the second interval, take the value x=2.5x=2.5. Plug this value into the inequality. You will
get the statement that says, 0.25>00.25>0, which is false. This means that the interval
of 3<x<23<x<2 is not part of the solution set.
From the third interval, take x=3x=3. Follow the same process as above. You will get this
result: 30>030>0, which is true. Therefore, the interval 2<x<+2<x<+ is part of the solution
set.
Finally, the solution set of the quadratic equality is x>2x>2 and x<3x<3.
Functions
You can add, subtract, multiply, and divide functions, as well as perform a special operation called
function composition. If f(x)f(x) and g(x)g(x) are functions, the following are the rules for operating
them mathematically:
Addition:
(f+g)(x)=f(x)+g(x)(f+g)(x)=f(x)+g(x)
Example:
f(x)=x3f(x)=x3
and
g(x)=x2+1g(x)=x2+1
(f+g)(x)=x3+x2+1(f+g)(x)=x3+x2+1
Subtraction:
(fg)(x)=f(x)g(x)(fg)(x)=f(x)g(x)
Example:
f(x)=x2+3x5f(x)=x2+3x5
and
g(x)=3x2+x+8g(x)=3x2+x+8
(fg)(x)=2x2+2x13(fg)(x)=2x2+2x13
Multiplication:
(fg)(x)=f(x)g(x)(fg)(x)=f(x)g(x)
Division:
(fg)(x)=f(x)g(x)(fg)(x)=f(x)g(x)
Function composition: In this operation, the result of one function is sent through the second
function. A small circle is used as a symbol for composition ().
(fg)(x)=f(g(x))(fg)(x)=f(g(x))
Example:
f(x)=x2f(x)=x2
and
g(x)=3x+2g(x)=3x+2
(fg)(x)=(3x+2)2=9x2+12x+4(fg)(x)=(3x+2)2=9x2+12x+4
Take note that reversing the order of f and g yields a different result:
(gf)(x)=3x2+2(gf)(x)=3x2+2
Modeling
Mathematical modeling is a technique used to simplify a problem to its basic characteristics, such as
graphing or writing equations to depict real situations and draw useful solutions.
Familiar formulas, such as I=PrtI=Prt for simple interest on investments, are mathematical models
used for predicting unknown values given some known information. However, not all mathematical
problems have formulas, and we may need to derive our own through mathematical modeling. We
do this when we solve algebraic problems, for instance, representing unknown values with variables,
analyzing given information, setting up equations, and using unit models for generalization into
bigger dimensions. This entails a more comprehensive understanding of concepts and not merely
rote learning.
Matrices
A mathematical matrix is an array of numbers in a specified number of rows and columns. Matrices
can be added, subtracted, multiplied, divided and transposed. Matrices are named with capital
letters, such as A, B, C.
To add matrices, they must match in size, meaning the number of rows and columns in one matrix
must be the same as the number of rows and columns in the other matrix. Elements in the first
matrix are added to their matching elements in the second matrix.
Subtraction follows the same procedure as addition except for the operation.
Multiplication can be between a constant and a matrix, between 2 matrices, or between a matrix and
the inverse of another matrix.
Multiplication between a constant and a matrix is called scalar multiplication where the constant is
multiplied with every element in the matrix.
Multiplication between matrices is a bit more tricky. To multiply 2 matrices, the number of columns in
the first matrix must be the same as the number of rows in the second matrix, and the resulting
matrix must have the same number of rows as the first matrix and the same number of columns as
the second.
Lets consider multiplying Matrix A with Matrix B
Matrix A has m rows x n columns multiplied by Matrix B with n rows and p columns equals a matrix
with mrows and p columns.
The dot product is a concept unique to multiplication of matrices. It is found by multiplying each
element in the first row of Matrix A with each matching element of the first column of Matrix B, and
then adding these products together. This dot product becomes the first element in the resulting
matrix. The procedure is repeated for the first row of Matrix A and the second column of Matrix B,
then for the second row of A with the first column of B, then the second row of A with the second
column of B.
Dividing Matrix A by Matrix B actually involves multiplying Matrix A with the inverse of Matrix B.
Roots of Polynomials
Solving polynomials means finding the roots or zeroes of polynomials, or the points where the
function is equal to zero. The degree of a polynomial with one variable is the largest degree of that
variable.
Complex Numbers
Complex numbers are terms that are made up of real and imaginary numbers. Real numbers are
almost any number that represents quantity, such as 55, 9494, 66, and 7.987.98. Imaginary
numbers contain the unit i which is equal to 11. When i is squared, it yields a negative
number, a property that makes it unique.
Coordinate Geometry
(x2+20x)+(y216y)=148(x2+20x)+(y216y)=148
(x2+20x+102)+[y216y+(82)]=148+100+64(x2+20x+102)+[y216y+(82)]=148+100+64
(x+10)2+(y8)2=16=42(x+10)2+(y8)2=16=42
x2a2+y2b2=1x2a2+y2b2=1
The major and minor axes can be plotted using x=ax=a and y=by=b.
Unlike the ellipse, the hyperbola is an open curve; its equation on the cartesian plane is very similar
to that of the ellipse and is given as:
x2a2y2b2=1x2a2y2b2=1
The vertices are at (-a, 0) and (a, 0). The curves approach but never touch the asymptotes defined
as: y=baxy=bax and y=baxy=bax.
Graphing Inequalities
To graph linear inequalities, you start much the same way as you would when you graph an
equation.
1) Determine the x and y intercepts, and plot them on the graph.
Example: 2x+3y<52x+3y<5.
When y=0y=0, we find the x-intercept to be x<52x<52.
When x=0x=0, we find the y-intercept to be y<53y<53.
(Take note of the inequality here because this is important when graphing).
2) Connect the points with a straight line. Use a dotted or broken line if the inequality is
either << or >>; use a bold or heavy line if the inequality is either or . As noted above, if y is
less than, or less than or equal the expression, shade the area below the line. If y is greater than, or
greater than or equal the expression, shade the area above the line. The shaded area represents
the solution set for the inequality.
Slope
The slope of a line is designated as m, and is defined as the change in y divided by the change in *x.
It is also described as the rise over run. The slope of a line can be determined if you know 2 points
on the line. Two forms often used when solving for slope or linear equations are:
The slope-intercept form:
m=yy1xx1m=yy1xx1
Distance=(x2x1)2+(y2y1)2Distance=(x2x1)2+(y2y1)2
The midpoint of two points is simply halfway between the two points. Knowing the coordinates on
both ends of a segment, simply add the two x coordinates and divide by 2 to get the x coordinate of
the midpoint. Add the two y coordinates and divide the value by 2 to get the y coordinate of the
midpoint.
Conics are curves formed when a plane cuts through a cone at various angles. Two conics are
closed curves (circle and ellipse), two other conics are open curves (parabola and hyperbola). The
general equation of a conic is: Ax2+Bxy+Cy2+Dx+Ey+F=0Ax2+Bxy+Cy2+Dx+Ey+F=0.
Plane Geometry
Properties and Relations of Plane Figures
Angles and Relations among Perpendicular and Parallel Lines
Parallel lines are two or more lines that have the same slope, are equidistant to each other, and will
never intersect. When two lines do intersect each other, they form an angle between them. The
angle measures the amount of turn in degrees. When that angle measures exactly 90-degrees, the
lines are said to be perpendicular. The slope of a line is the negative reciprocal of the slope of
another line that is perpendicular to it.
The sum of all interior angles of a triangle is 180-degrees. In right triangles, the square of the length
of the longest side is the sum of the squares of the two shorter sides. This is also known as the
Pythagorean theorem. Triangles become significantly important in trigonometry, so it is worthwhile to
give them special focus in geometry.
Rectangles:
The sum of all interior angles of a rectangle is 360 degrees and all angles are right angles. The
opposite sides are parallel and have the same measure.
Parallelograms:
Like rectangles, parallelograms have parallel opposite sides with equal lengths. The opposite angles
in a parallelogram are equal.
Trapezoids:
In a trapezoid, one pair of opposite sides is parallel, the other pair of opposite sides is not. It is called
an isosceles trapezoid if the lines that are not parallel have equal lengths and equal interior angles.
Transformations
Geometric shapes undergo a transformation without resizing when they are reflected, rotated, and
translated. Without resizing, the shapes remain congruent to the original shape.
A rotated shape is turned around a center. A reflected shape is flipped about an axis or line. A
translated object is moved with all its points being moved in the same distance and direction.
They can also be resized but still remain similar to the original shape.
Volume
Volume is the capacity that a solid can hold or the 3-dimensional space that it occupies. The volume
for the most common 3-dimensional shapes can be computed from the following formulas:
Cuboid: V=s3V=s3 where s = length of its side
Rectangular prism: V=lwhV=lwh
Cylinder: V=r2hV=r2h
Pyramid: V=13bhV=13bh
Cone: V=13r2hV=13r2h
Sphere: V=43r3V=43r3
F+VE=2F+VE=2 where F is the number of faces, V is the number of vertices, and E is the
number of edges of a polyhedron. For a few solids, such as the torus and the Mobius strip, this
theorem is not applicable.
Trigonometry
Trigonometry deals with the study of triangles, the properties and measurement of their sides and
angles, and how these are used in solving many problems involving other shapes that can be broken
down into several triangles.
One angle is 90 degrees, usually shown as a little square between the two short sides of the
triangle.
Another angle, often called theta () in formulas, is the reference of how the sides of the triangle
are named.
Studying trigonometry and the special properties of triangles is useful in solving unknown angles
and/or sides in triangles. Generally, if we know any combination of 3 angles or sides (e.g., 2 sides, 1
angle; 1 side, 2 angles), we can solve for the other 3 unknown angles or sides.
sin()=oppositehypotenusesin()=oppositehypotenuse
cos()=adjacenthypotenusecos()=adjacenthypotenuse
tan()=oppositeadjacenttan()=oppositeadjacent
csc()=hypotenuseoppositecsc()=hypotenuseopposite
sec()=hypotenuseadjacentsec()=hypotenuseadjacent
cot()=adjacentoppositecot()=adjacentopposite
Trigonometric Identities
Trigonometric identities are true only for right triangles. Here are just some of the trigonometric
identities commonly used:
tan()=sin()cos()tan()=sin()cos()
sin2()+cos2()=1sin2()+cos2()=1
Opposite angle identity: sin()=sin()sin()=sin() (this is true for the other functions as
well)
Double angle identities:
sin2=2sincos=2tan1+tan2sin2=2sincos=2tan1+tan2
cos2=cos2sin2=1tan21+tan2cos2=cos2sin2=1tan21+tan2
tan2=2tan1tan2tan2=2tan1tan2
Half-angle identities:
sin2=1cos2sin2=1cos2
cos2=1+cos2cos2=1+cos2
tan2=1cos1+costan2=1cos1+cos
Triangle identities, on the other hand, applies to all types of triangles, not just right triangles. These
identities are the laws of sines, cosines, and tangents. For ease in understanding, lets have a
common description of the sides and angles of the triangle. This is any triangle with interior angles
measuring A, B and C, and sides measuring a, b and c. Take note that A is opposite a, B is
opposite b, and C is opposite c.
Law of Sines:
asinA=bsinB=csinCasinA=bsinB=csinC
Law of Cosines:
c2=a2+b22abcosCc2=a2+b22abcosC
Law of Tangents:
a+bab=tan12[A+B]tan12[AB]a+bab=tan12[A+B]tan12[AB]
sin(23)=oppositehypotenusesin(23)=oppositehypotenuse
Opposite=sin(23)hypotenuse=0.390750=19.54
Types of Comprehension
Literal or Explicit
Literal or explicit comprehension requires you to synthesize information overtly stated in a text. This
requires being capable of finding information in a work and understanding given information, whether
it is written or provided in graphs and other charts.
Implied or Implicit
Implied and implicit comprehension require you to be able to go one step further; rather than simply
finding information and repeating it, implied or implicit information requires you to take the
information given, and determine your own conclusions based on the information provided.
you are seeking the answer to why did this event happen? From there, you may be required to
locate additional effects of the single cause, or subsequent effects from the first effect (known as the
domino effect).
Form Generalizations
Forming generalizations requires developing a statement about a group that is true of most of that
group (though not necessarily all). To create a generalization, you must gather a few things:
supporting facts, examples, past experience, and logic/reasoning. For instance, you might look at
cats and say your own cat loves playing with yarn. Your aunts cat loves playing with yarn. Cats are
often depicted as playing with a ball of yarn. From there, you can successfully make the
generalization that cats like to play with yarn.
General Information
The Science section of the ACT will involve understanding basic concepts you should have covered
in high school biology, physics, chemistry, and earth science classes. The questions do not stand
alone, but will test your understanding of written passages and visual information like graphs and
charts. You will need to combine your understanding of science terms and concepts with reading
comprehension of scientific material in order to successfully answer the questions.
Since it is not necessary to memorize hundreds of science definitions or practice science concepts in
order to do well on this test, we will focus primarily on test-taking practices in this study guide. The
way in which you deal with the material presented is far more important than your specific scientific
knowledge.
The Challenge
The Science section of the ACT is always the final section of the test. The ACT test makers know
that students do not have infinite stamina and focus. They also have a good understanding of the
metrics used to gauge a students likelihood for success during his or her first year of college. They
place the Science section at the end because the Science section requires the greatest amount of
focus and concentration and they want you to face this section after youve already been drained by
all of the other sections. However, knowing this, you should have a good idea of whats required to
overcome this obstacle.
Practice taking the ACT under the same conditions as the actual testmeaning, set a timer for the
allotted amount, work through the section, and stop when time is over. During your first practice
exams, you may have trouble finishing every section on time. This just means that you have more
practice to do and strategies for you to refine.
In the absence of careful or close reading, analyzing the information presented is very difficult. Any
information provided in the question should be directly matched with information provided in the
graph or diagram. Questions will use expressions such as in Figure 3, Chart 1 states, and
according to diagram x. In every case in which an expression or phrase like this appears, place
one finger directly below the specific graph or diagram referenced, then proceed to find and focus on
the exact graphic with your other finger.
This is obviously a very trivial action to perform, but it is the first step in ensuring success on a test
that primarily focuses on assessing your ability to follow directions. Utilizing a strategy like the one
outlined, and making it a habit, guarantees that accidentally looking at or reading the incorrect graph
never happens. Employing a system like this will also save you time in the long run because you are
already approaching the section with a game plan in mind. And as always, strategies like this work
best when routinely practiced.
It is also important that you examine all of the labels and details embedded in the graph or diagram.
This includes, but is not limited to:
chart/diagram titles
axes labels/names (What is the dependent variable? What is the independent variable?)
keys/legends, units/dimensions
After examining and taking note of all of the labels and units, etc., move on to the information
presented in the graph or diagram, ensuring to note any obvious trends. Is there a
positive/negative/no correlation between the variables? In other words, as one variable
increases/decreases, does the other variable increase/decrease as well? Some questions will ask
you to draw conclusions from the trend present in a diagram and state where prospective data point
is most likely to lie. By already generating this information when analyzing the graphics, you will
have a very good idea as to what the answer to such questions will be.
Again, time management is crucial for earning a top score on the Science section, particularly
because of the difficulty in making sense of and managing all of the information that is presented to
you.
After practicing, you are likely to find that the Data Representation portion is primarily an information
gathering and matching test. The test makers have spread a bunch of information across a few
diagrams or graphs, and it is your job to first read through and then find the connections across the
different diagrams. After doing this, your job will be to match the chart or diagram referenced in a
question with the chart or diagram itself and draw the proper conclusion from the trend present in the
data.
As you gain familiarity with the specific types of questions asked, you will have a good idea of what
information is important in diagrams and graphs that you encounter, which will enable you to cater
the notes you take and trends you notice to the questions you are likely to be asked. This will
ultimately save you time that you can then spend to ensure you are able to comfortably read through
and answer questions in the other two passage types.
Research Summaries
The Research Summaries portion constitutes the largest portion of the Science section as a whole,
so it is wise to spend a greater amount of time familiarizing yourself with its makeup. This section will
present to you a series of experiments along with all of the information relevant to the experiment,
including the setup, data, and methods of experimentation. Just like the Data Summary section, it is
imperative that you read very closely and carefully, paying attention to all of the details included.
While not critical to your success on the Science section, a basic understanding of the scientific
method can help you assess and analyze the setup and purpose of an experiment.
The scientific method begins with an observation of a phenomenon or event that a scientist then
wonders about before developing a hypothesis, or potential explanation, along with predictions
relating to the phenomenon or event.
An experiment is designed, and the scientist collects data using objective measuring devices
before analyzingthe results and relating the conclusions of the experiment to the generated
hypothesis.
If the conclusions verify the hypothesis, the scientist will ask another scientist to perform the same
experiment to further validate the explanation. If the hypothesis is not verified, the scientist may
formulate a new hypothesis and begin a new experiment to test it.
Along with the scientific method, it is helpful to understand the relationship between dependent and
independent variables. To draw conclusions about the relationship between variables in an
experiment, it is important that an experimenter can show causation or correlation between
variables. To accomplish this, an experimenter will need to control one set of variables while
changing one other variable and then examining the consequences of changing this single variable.
The variable that is manipulated by the experimenter is the independent variable and every other
variable in the experiment is considered a dependent variable (these variables depend on the
independent variable).
Conventionally, the independent variable is listed on the x-axis and the dependent variable is listed
along they-axis (though this is not always the case).
Always identify the dependent and independent variables in the experiments presented in the
research summaries section.
Similar to the Data Representation section, the Research Summaries section will include visual
components and text relating to the graphs. The same skills employed in the data representation
section apply here, and it is critical that you read and understand each of the drawings provided.
Look for, and note, any trends that you discover in your analysis. Underline and jot notes in the
margin when you encounter information you deem important.
Conflicting Viewpoints
Of the three passage types on the Science section, this is the most similar to a Reading
Comprehension test. In the Conflicting Viewpoints section, you will be required to read and analyze
two separate viewpoints relating to the same topic and then answer questions about the two
passages. However, understanding the purpose and details of the section can help you to perform
well on this portion of the test.
Given the question type, it should be clear that, for you to compare different viewpoints, it is
absolutely necessary that you first have a good idea of what those viewpoints are. Prior to diving into
any passage, you should always be of the mindset that you are on a hunt for information.
You are searching first and foremost for the main idea or argument presented in a piece of text.
Underlying this, you are concerned with the manner in which this argument or main idea is
presented. What is the tone of the language used? What is the supporting evidence? How is the
argument structured? Does the author appeal to your emotions or are objective details provided?
These are all considerations you should train yourself to be on the lookout for when reading any text
on which you will be tested.
Additionally, unless you are eidetic, it is highly recommended that you incorporate and refine your
active reading skills. This entails reading with a pencil in hand and actively engaging the text with
which you are interacting. Under timed conditions, it is most important that you focus only on the
details on which you will be tested, but in general, a text will be easier to read and understand if you
maintain an active dialogue with the text. This is not an easy skill to master, but the more time you
spend practicing this style of reading, the more easily you will be able to digest the complicated texts
you will be required to analyze when in college.
As you read through the viewpoints presented in this section, underline or make note of the main
idea/argument as well as any supporting evidence you find. Because you are going into the text
already on the lookout for this information, it should be easier to find it. But if you notice that you
have trouble deciding on what the important information in a passage is, there are many places to
practice doing just this.
After completing a passage, you should have a clear idea of what the authors argument is, and how
the argument is supported. You should have portions underlined and notes jotted in the margin that
enable you to quickly access this information when a question specifically references the author in
question. When reading through the second passage, utilize the same method of active reading.
Note the main idea/argument, how it is supported, tone, etc., but also keep in mind any similarities or
differences with the first author and jot these down as you continue reading. If you have trouble
keeping track of information, outlining or drawing a quick sketch attributing the viewpoints and
support to authors in different columns might prove beneficial. One of the skills that colleges look for
in prospective students is their ability to organize and make sense of interrelated concepts and
pieces of information, so refining your ability to organize information like this is not without worth.
Like the other sections, as you gain more familiarity with the style of both the passages and the
questions asked, you will have a much clearer idea on what to focus on as you read.
A Final Note
Practice and preparation play a crucial role in your ability to regularly perform well on tests like this.
Work through old examinations paying close attention to your weak areas and making note of your
most common mistakes. Continue practicing until you are confident in the system you have
developed to make it through each of the tests sections without worry about the time limit while
acquiring a majority of the information relevant to answering the questions correctly. The more time
you free for the questions that pose you the most trouble, the more likely you are to work through to
the correct answer and greatly improve your score.
General Information
The Writing section of the ACT test involves more than being able to form sentences, spell words
correctly, and put periods in the right places. While evaluators will be looking for these things, too,
the main things they seek involve your ability to think, reason, and put thoughts on paper, in a clear
and meaningful way.
The test contains one question, or prompt and three reference passages. You will have 40 minutes
to plan, write, and review an essay that addresses the prompt, using evidence in the reference
passages. The three passages are different perspectives on the same topic. Evaluators will be
looking for how well you do these things in your essay:
explain the relationship between your perspective and those given in the three passages
It really doesnt matter what your perspective is, just how well you defend it in your writing.
The desired essay skills are divided here into the four domains in which your writing will be scored:
Organization
Language Use
Within each domain, the evaluators will decide to what degree you accomplish several tasks. The
better you perform, the more points you will receive.
For example, one of the tasks in the Ideas and Analysis domain is to engage with the
perspectives you are given. The language in the scoring guidelines goes from a high of critically
engages with through productively engages with, engages with, responds to, and weakly
responds to. The lowest descriptor of performance on this task is fails to respond to. Your
performance on this task, and several others, will combine to form your score on this domain, which
will be between 1 and 6.
So, in this case, if you perform at the highest level on engaging and perform at that same high level
on the other three tasks in the domain, you will score 6 for the Ideas and Analysis domain. You will
get one score from each of two evaluators for each domain. The two scores will be added to form
your score on that domain, which will be between 2 and 12. This domain score will be one of your
four scores for writing. Note that the domain scores do not add up to the total score for writing. They
are used to arrive at that score, however.
Try some practice essays and see if you can incorporate all of these skills in your writing. You can
begin by writing without a time limit, but youll want to gradually work toward planning, writing, and
reviewing an essay of this type within a 40-minute window.
You can even use the official evaluator guidelines to score your practice essays. Youll find it here on
pages 61 and 62. This booklet is from the official ACT test site. Then, you can work on any areas in
which you struggle and prepare to write a great essay!
Wed like for you to know exactly what to expect and how you can prepare to do your best. Here, we
list the desired tasks in each domain and tell you what they mean in terms of your performance. For
every standard listed here, youll earn maximum points from evaluators of your ACT essay for doing
it thoroughly, fewer points for sort of doing it, and very few points if you mostly dont do it, at all. So,
strive for the highest level of performance on each task!
Context in Analysis
You need to establish a context for your argument. This is done by sort of setting the stage for your
comments. To do this, be sure to present in exactly what circumstance the arguments of the
authors would be valid, invalid, etc.
Deep Examination
In the authors work, look for evidence of underlying reasons he/she feels that way about the issue.
Address any complexities you find that you think the author may not be considering. This requires
examining the authors possible motive for writing the piece in the first place. Furthermore, discuss
how you think the authors experiences and/or values contribute to his/her opinion.
Development
In your essay, you cannot just make blanket statements and move on. Plan to present each of your
arguments, one at a time, supporting each with evidence from the text and your viewpoint. Keep in
mind that evidence from the text could include author statements that you believe are invalid or
faulty. Just be sure to back up your claims with your own evidence statements.
Clarity of Reasoning
As you write, analyze what you are proposing in an if-then manner. If what you say is true, does it
necessarily follow that something else you say will be valid? Are you sure of the connection and its
validity, in various circumstances and under various conditions? In other words, could a reader of
your argument see the connection easily?
Domain 3: Organization
Organization is important during both the planning and writing of your essay. During the short (5minute) planning session you allow yourself, try to sketch out your main points and put them in a
reasonable order. Think about your approach to the essay and what you want to accomplish. Then,
as you write, keep the details in mind: How are you going to present a convincing, well-thought-out
argument? What strategies can you use to achieve your overall purpose? Add these details where
appropriate.
Strategy
A good author has a strategy in mind when writing. You have been given the purpose for this essay:
to present your view on three essays written by others, so that part is set. But how are you going to
go about it? Essay readers will be looking for this strategy when evaluating your work.
Controlling Purpose
Be sure that everything you write in your essay speaks to your argument. Be careful to stick with the
task and not be tempted by a related subject. If it doesnt bolster your argument in some way, leave
it out. But search thoughtfully for things that do apply to your purpose.
Logical Sequence
Sequence in writing is part of strategy. How will you structure your piece to achieve the desired
result? You should present your strongest argument point first, or build to a climax by slowly going
from least impressive point to the most definitive one. You should allude to all of them in the
introduction, or at least mention that there are several or many reasons for the position you take.
Transitions
Part of writing a convincing argument is being able to move from one point to another in a smooth,
seemingly uncontrived manner. A writer does this by making some sort of reasonable connection
between paragraphs. Dont just start every paragraph as if the previous one did not exist. The need
for smooth transitions could affect the sequence you choose, as well. Some things tend to be more
easily related or eased into with words.
Words to Enhance
Just sticking a long or complicated-sounding word in a sentence is not necessarily a positive thing.
Every word you use should further the impact of your argument. If it doesnt, choose another word.
Word Choice
Besides furthering your argument, your choice of words should always do one more thing: make the
argument absolutely clear to the reader. Use words that cannot easily be misunderstood and
say exactly what you mean. A tip: If you find yourself stressing over a word (thinking you can find a
better one), draw a light circle around that word and come back to it during your review. Sometimes
the perfect word will come to you a few minutes later as you reread. This is also a good way to keep
your thoughts moving and not get sidetracked from your overall purpose.
While one or two errors along these lines will not affect your score, many errors will impact it. Be
sure you know the grammar, usage, and punctuation rules, and that you check for errors in them as
you review. Prior to testing, its not a bad idea to review things that give many people trouble, such
as confusing words (accept/except) and use of a semicolon (;). There are many online sites
containing quick practice on these things.
Any writing task is easier if you have spent time reading the writing of others. When you read
pieces written by good writers, you learn how they go about creating a masterful argument.
Be sure to look for examples of the tasks mentioned in the domains as you read and think
about how you can incorporate them into your own writing.
Practice making a writing plan. Even if you dont finish a complete essay each time, practice
taking a prompt and planning an essay addressing that prompt. Limit your planning time to 5
minutes or less, simply sketching it out on scrap paper. This is about the time limit youll need
to set for planning during the ACT test essay.
In addition to practicing the entire essay process, practice reviewing your own work. Find
some of those old essays from school to use for a new purpose! Again, limit yourself to 5
minutes for this, in preparation for the tests actual time limit. On test day, no one will tell you
to save 5 minutes at the end of the allotted time, to review, but you should do this. Practice
making quick work of the review process. You wont have time to make major changes, but
catching a mistake here and there could help boost your score.