Professional Documents
Culture Documents
1610 Machinery
1610 Machinery
Telephone:
Telefax:
Email:
Website:
McHUGH COMPONENTS
McHugh Components
89 Broomhill Road
Tallaght Industrial Estate
Tallaght
Dublin 24
Ireland
www.mchc.ie
Machinery Parts
2013
Machinery Parts
Contents
Machinery Parts
(Each section contains a full index)
Grass Harvesting
3 - 76
77 - 118
119 - 124
125 - 182
Tillage
183 - 242
Subsoiler
184 - 186
Plough
187 - 204
Cultivation
205 - 214
Power Harrow
215 - 225
Disc Harrow
226 - 227
Seed Drill
228 - 231
232 - 238
239
240 - 241
Combine
243 - 250
Sprayer
251 - 304
Spreader
305 - 322
PTO
323 376
Walterscheid
324 - 365
Comer
366 - 372
Universal Crosses
373
Comer Gearboxes
374 - 376
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
www.mchc.ie
Machinery Parts
Full range of catalogues available covering all our product lines. Go to www.mchc.ie to
download a pdf copy or contact a member of our Sales Staff for a printed copy
Tractor & Trailer
Tractor Parts to suit all major brands. Applications include Thermostarts, Exhausts, Fuel Pumps, Fuel
Bowls, Fuel Caps, Water Pumps, Radiator Hoses, Radiator Caps, Drain Taps, Thermostats, Fan Belts,
Filtration, Clutches, Torsion Dampers, Wheel Rims, Wheel Bolts and Nuts, Wheel - Axle Bearings
and Seals, Tie Rods, Hydraulic Breakaway Couplings, Linkage, Cab Glass, Gas Struts, Mirrors and
much more. Paint: Full range of colours available along with primers and thinners. Trailer Parts covers
Chassis, Body Mountings, Fastenings, General Body Fittings, Hinges, Tipper Body Fittings, Air Brakes
and Cargo Care
Hydraulics Catalogue
Hydraulic Hose, Hydraulic Hose Machines, Hydraulic Hose Assemblies, Pressure Washer Parts,
Two-Piece Swage Couplings, WEO Coupings, Multispiral Two-Piece Swage Fittings, Adaptors, Steel
Pipe, Quick Release Couplings, Valves, Cylinders, Hand Pumps, Power Packs, Test-Point Equipment,
Filters, Tank Parts, Gear Pumps, Gearboxes, Gear Motors, Orbital Motors, HRC (Highly Resilient
Couplings) Couplings, Accumulators
Transmission Catalogue
Bearings, Bearing Units, Seals, Chain, Belts, Taper Lock, Electric Motors
Workshop Catalogue
Greasing Equipment, Fuel Transfer Pumps, Oil Transfer Pumps, Fuel & Oil Accessories, Retracta Hose
Reels, Consumables, Tools, Air & Water Fittings, Hydraulic Hose Machines
Fasteners
Threaded Bar, Bolts, Nuts, Screws, Washers, 'O' Rings, Clips & Pins, Shafting, Collars, Keys, Chain,
Cable, Rope, Clamps, Ties, Tape, Knobs, Handles, Caps, Rivets, Springs, Dampers, Grease Nipples,
Hook Joints
Workwear Catalogue
Size & Product Information, Indoor Workwear, Workwear Accessories, Outdoor Workwear, High
Visibility Workwear, Waterproof Clothing, Thermal Clothing, Grene Display Units, Safety Footwear,
Personal Protection
www.mchc.ie
Grass Harvesting
Contents
Grass Harvesting
Mowers, Tedders, Swathers, Harvesters, Balers, Silage Wagons
Bellon
Claas
4-8
Farendlose
Fella
10 - 11
Fort
11
Fortschritt
11
Galfre
12
Garnier
12
Grasshopper
12
JF-Stoll
13 - 14
John Deere
15 - 20
Kemper
21
Kidd
21
Krone
22 - 25
Kuhn
26 - 32
Kverneland:
33 - 61
Deutz-Fahr
33 - 39
PZ
40 - 50
Taarup
51 - 56
Vicon
57 - 61
Lely
62 - 67
Malone
68
Marangon
68
Massey Ferguson
68
McHale
69 - 70
New Holland
70 - 71
Niemeyer
72
Pottinger
73 - 75
Strautmann
76
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
www.mchc.ie
Grass Harvesting
Bellon / Claas
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 21
Length: 108
Width: 47
Thickness: 3
Cranked blade
(Box Qty 25)
CM120108
LH Twisted blade
(Box Qty 25)
56151200
RH Twisted blade
(Box Qty 25)
56151300
OEM NUMBER
PART NUMBER
952043
RH Twisted blade
(Box Qty 25)
952042
Thread: M12
Length: 28
Width: 32
Collar: 17.5
Blade holder
952346
Cutting disc
for bolt on blade
holder
951510
935463
938597
Cutting disc
for quick fit blade
holder
952340
933376
Skid protection
plate (suits both
types of skids)
938966
TYPE
DIMENSIONS
RH Shown
Hole Size: 19
Length: 115
Width: 48
Thickness: 4
www.mchc.ie
DESCRIPTION
LH Twisted blade
(Box Qty 25)
These models of Claas Grass Mowers use the PW480 series of PTO shafts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
LH Twisted blade
Hole Size: 19
9041786
(Box Qty 25)
Length: 105
Width: 48
RH Twisted blade
9041776
Thickness: 3
(Box Qty 25)
LH Shown
Hole Size: 18.5
Hole Distance: 55
Length: 160
Width: 95
Blade holder
947.427.2
9474271
Grass Harvesting
Claas
TYPE
WM20 / 24 / 26 / 31F
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
(Box Qty 25)
96
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
Super Radura
(Box Qty 25)
96SR
Blade holder
921.065.1
9210650
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 370
Width: 135
Curl ID: 46
Thickness: 9.5
Tine
956815
16 x 650 x 8
16X650X8X6
Length: 370
Width: 135
Curl ID: 46
Thickness: 9.5
Tine
956815
Length: 370
Width: 140
Curl ID: 44
Thickness: 10
956907
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 592
Width: 86
Curl ID: 49
Thickness: 9
Tine
9554830
16 x 650 x 8
16X650X8X6
Length: 635
Width: 95
Curl ID: 40
Thickness: 9.5
Tine
9557100
16 x 650 x 8
16X650X8X6
TYPE
VOLTO 52
VOLTO 770
www.mchc.ie
TYPE
Grass Harvesting
Claas
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 190
Width: 76
Curl ID: 28
Thickness: 6
Tine
986290
Length: 950
Width: 45
Holes distance:
50 / 75
Band
918445
ID: 35
OD: 72
Height: 38.9
Regreasable
bearing
GRAE35NPPB
LH Knife
984670
RH Knife
984671
16 x 650 x 8
16X650X8X6
Length: 230
18 Spline - 1 3/8"
Splined shaft
to suit header
pick up
677501A
JAGUAR
Length: 190
Width: 68
Curl ID: 29
Thickness: 6
Tine
918239
Various Models
Teeth: 5
Pitch 8 x 31
Bore: 40
Outer : 119
Floor chain
sprocket
NW83153
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
Grass Harvesting
Claas
TO SUIT MODELS
820, 840
830, 850
860, 880
AIR
INNER
AF4523
AF25230
AF25230
AIR
OUTER
AF1802
AF25062
AF25062
FUEL
FF5054
(x2)
FF5405
FF5054
(x2)
870, 890
AF25230
AF25062
FF5405
900
AF25230
AF25062
FF5405
www.mchc.ie
FUEL /
WATER
SEP.
OIL
HYD.
CAB AIR
LF3327
HF35345
(pump)
HF35200
(tank top)
LF4014
(spin on)
AF27859
FS19532
(sensor port)
FS19932
(no sensor)
FS20403
(final filter)
LF3327
HF35345
AF27859
LF3327
HF35345
(pump)
HF35200
(tank top)
LF4014
(spin on)
AF27859
LF3327
(870 only)
LF3829
(890 only)
HF35345
AF27859
LF3829
HF35345
AF27859
FS19532
(sensor port)
FS19932
(no sensor)
FS20403
(final filter)
FS19532
(sensor port)
FS19932
(no sensor)
FS20403
(final filter)
Grass Harvesting
Claas
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 190
Width: 74
Curl ID: 30
Thickness: 5
Tine
8603510
8214211
8214211
Length: 355
Width: 190
Thickness: 5
Knife
8234221
ID: 11.5
OD: 35
Height: 15.5
Cam bearing
393480
Length: 206
Width: 75
Curl ID: 30
Thickness: 5
Tine
8072972
8072972
ID: 11.5
OD: 35
Height: 15.5
Cam bearing
393480
Length: 195
Width: 69
Curl ID: 29
Thickness: 5.5
Tine
9182380
918238
Length: 191
Width: 70
Curl ID: 29
Thickness: 5.5
Outer tine
848.381.0
848381
Knife
8510220
ID: 11.5
OD: 35
Height: 15.5
Cam bearing
393480
Length: 195
Width: 69
Curl ID: 29
Thickness: 5.5
Tine
9182380
918238
Length: 191
Width: 70
Curl ID: 29
Thickness: 5.5
Outer tine
848.381.0
848381
Knife
ID: 11.5
OD: 35
Height: 15.5
Cam bearing
393480
16 x 650 x 8
16X650X8X6
www.mchc.ie
8377790
Grass Harvesting
Claas
www.mchc.ie
OEM NUMBER
-
8a
PART NUMBER
1716000018
Grass Harvesting
Farendlose
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 19
Length: 99
Width: 40
Thickness: 3
Straight blade
(Box Qty 25)
99
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 280
Width: 61
Curl ID: 44
Thickness: 6
Tine
66221000
5034
TYPE
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
Grass Harvesting
Fella
TYPE
KM165
www.mchc.ie
LH Shown
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
(Box Qty 25)
96
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
Super Radura
(Box Qty 25)
96SR
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Cranked blade
(Box Qty 25)
96C
Thread: M10
Length: 30
Width: 18.5
Collar: 15
Blade holder
101004
478.415
174841501
V Belt
SPA3000
(4 per mower)
Hole Size: 19
Length: 98
Width: 48
Thickness: 4
LH Blade
(Box Qty 25)
121712
RH Blade
(Box Qty 25)
121713
Blade holder
101004
478.415
174841501
V Belt
KM166
KM191, KM192
KM250 540RPM
KM250 1000RPM
SPA3082
SPA3350
SPB2800
SPB2500
LH Blade
(Box Qty 25)
122329
RH Blade
(Box Qty 25)
122330
Blade holder
426.887
426.053
122181126287
LH Blade
(Box Qty 25)
133074
RH Blade
(Box Qty 25)
133075
Thread: M12x1.25
Length: 26
Width: 30
Collar: 18
Blade holder
426.887
426.053
122181126287
Thread: M10
Length: 26
Width: 30
Collar: 16.5
Blade holder
477.263
477.274
477263274
Thread: M10
Length: 30
Width: 18.5
Collar: 15
-
LH Shown
Hole Size: 19
Length: 106
Width: 48
Thickness: 4
Thread: M12x1.25
Length: 26
Width: 30
Collar: 18
LH Shown
Hole Size: 19
Length: 118
Width: 48
Thickness: 4
10
Grass Harvesting
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 390
Width: 96
Curl ID: 53
Thickness: 9.5
Tine
150862
487922
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 560
Width: 93
Curl ID: 40
Thickness: 9.5
Tine
160 111
160111
DESCRIPTION
LH Blade
(Box Qty 25)
OEM NUMBER
PART NUMBER
98SX
98DX
56210100
56210100
56210100E
014760
RH Blade
(Box Qty 25)
014768
LH Blade
(Box Qty 25)
129MEL
RH Blade
(Box Qty 25)
129MER
OEM NUMBER
PART NUMBER
121712
121713
TYPE
TYPE
DIMENSIONS
LH Shown
LH Shown
LH Shown
Hole Size: 21
Length: 129.5
Width: 47
Thickness: 4
RH Blade
(Box Qty 25)
Original
blade holder
Economy
blade holder
LH Blade
(Box Qty 25)
TYPE
DIMENSIONS
LH Shown
Hole Size: 19
Length: 98
Width: 48
Thickness: 4
www.mchc.ie
11
DESCRIPTION
LH Blade
(Box Qty 25)
RH Blade
(Box Qty 25)
Grass Harvesting
Fransgard
TYPE
LH Shown
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 375
Width: 113
Curl ID: 42
Thickness: 9
RH Haybob
narrow rotary tine
PZ106
(Yellow)
PZ106
LH Haybob
narrow rotary tine
PZ107
(Blue)
PZ107
Length: 375
Width: 113
Curl ID: 42
Thickness: 9
RH Haybob wide
rotary tine
PZ111
(Yellow)
PZ111
LH Haybob wide
rotary tine
PZ110
(Blue)
PZ110
Fixing set
TH200
SERIES
ENDS
TO SUIT MODELS
APPLICATION
1 3/8" 6 spline Yoke /
1 3/8" 6 spline K33 clutch
W2200
(clutch rating 600 dnm)
Haybob guard to suit Fransgard
Haybob guard cone to suit Fransgard
Cam & spring kit to suit K33 clutch. Contains: 8 cams, inner & outer springs
www.mchc.ie
11a
PART NUMBER
W221110K33
SD151000WA
8515101
AGRASET106
Grass Harvesting
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 19
Length: 108
Width: 48
Thickness: 3
Flat blade
(Box Qty 25)
108D
108D
Hole Size: 21
Length: 108
Width: 47
Thickness: 3
Flat blade
(Box Qty 25)
495806
Hole Size: 21
Length: 108
Width: 47
Thickness: 2.8
Cranked blade
(Box Qty 25)
495807
Hole Size: 21
Length: 108
Width: 47
Thickness: 4
LH Blade
(Box Qty 25)
3428107005
RH Blade
(Box Qty 25)
3428107006
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Flat blade
(Box Qty 25)
FR152.327
FR152327
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole: 21 x 18.25
Length: 129
Width: 44
Thickness: 5
Flat blade
(Box Qty 25)
AEL
CM170
LH Shown
TYPE
www.mchc.ie
TYPE
12
Grass Harvesting
JF-Stoll
TYPE
2000
LH Shown
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Flat blade
(Box Qty 25)
2220101A
LH Twisted blade
(Box Qty 25)
13800031
RH Twisted blade
(Box Qty 25)
13800032
Flat blade
(Box Qty 25)
13800001
2222291
Hole Size: 19
Length: 107
Width: 48
Thickness: 4
Hole: 20.5x24.3
Length: 94
Width: 50
Thickness: 4
CMT245
Rotary Mowers
CM170, CM190, CM225,
CM1900, CM2250,
CMT2800
LH Shown
LH Shown
Disc Mowers
GD2400, GD2800,
GD3200, GMS2800,
GMS3200, GX2400S,
SB2400, SB2800
LH Shown
www.mchc.ie
Hole: 20.5x24.3
Length: 92.5
Width: 48
Thickness: 4
LH Twisted blade
(Box Qty 25)
13800021
2222317X
RH Twisted blade
(Box Qty 25)
13800022
2222318X
V-Belt
D351
V-Belt
Conditioner belt
for OLD mower
B63
(4 per mower)
V-Belt
Conditioner belt
for NEW mower
C61
(2 per mower)
Hole Size: 19
Length: 97
Width: 50
Thickness: 4
Flat blade
(Box Qty 25)
13800025
LH Twisted blade
(Box Qty 25)
13800023
RH Twisted blade
(Box Qty 25)
13800024
V-Belt
to suit CM1900
SPB3150
Hole: 20.5x23
Length: 132
Width: 50
Thickness: 4
Flat blade
13800013
LH Twisted blade
(Box Qty 25)
13800023
RH Twisted blade
(Box Qty 25)
13800024
Hole Size: 19
Length: 97
Width: 48
Thickness: 4
Hole Size: 19
Length: 97
Width: 48
Thickness: 4
13
Grass Harvesting
JF-Stoll
TYPE
Z450D, Z550D,
Z450 / Z550 / Z660
HYDRO, SPEED 580 /
680 / 900 HYDRO,
Z-PRO from 1998
Hayflash
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 397
Width: 108
Curl ID: 52
Thickness: 10
LH Rotation
0673743
RH Rotation
0673744
Length: 380
Width: 105
Curl ID: 52
Thickness: 9.5
Tine
0673740
Tine holder
0673700
Tine holder
0673720
Clamp bar
0673730
Length: 520
Width: 90
Curl ID: 41
Thickness: 9
Tine
Length: 264
Width: 61
Curl ID: 52
Thickness: 6.5
Tine
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 150
Width: 74
Curl ID: 24
Thickness: 5
Pick up tine
14350027
14330506
Length: 150
Width: 74
Curl ID: 24
Thickness: 5
14350026
Length: 190
Width: 60
Thickness: 6
Blade
2064103A
2064103A
0699780
929202
FC80, FC90,
FCT110, FCT800,
FCT850, FCT900,
FCT1100
www.mchc.ie
TYPE
14
Grass Harvesting
John Deere
TYPE
DIMENSIONS
LH Shown
OEM NUMBER
PART NUMBER
56151210
RH Blade
(Box Qty 25)
56151310
Thread: M10
Length: 28
Width: 30
Collar: 16
Original
blade holder
56210100
56210100
Economy
blade holder
56210100E
LH Blade
(Box Qty 25)
55903210
55903210
RH Blade
(Box Qty 25)
55903310
55903310
Thread: M12
Length: 33
Width: 30
Collar: 18
Original
blade holder
CC19994
to suit mower with
Kuhn Bed
56115800
RH Shown
DESCRIPTION
LH Blade
(Box Qty 25)
Economy
blade holder
Blade bolt only
56115800E
E92221
E80242
OEM NUMBER
DC26705
PART NUMBER
55911100
OEM NUMBER
DC23289
(Economy Type)
PART NUMBER
55901200E
OEM NUMBER
CC31681
PART NUMBER
05901200
OEM NUMBER
DC34130
PART NUMBER
DC34130
www.mchc.ie
OEM NUMBER
DC50000
15
PART NUMBER
DC50000
Grass Harvesting
John Deere
OEM NUMBER
DC23355
PART NUMBER
55900110
OEM NUMBER
CC19295
PART NUMBER
56207000
www.mchc.ie
OEM NUMBER
CC23359
15a
PART NUMBER
55900800
Grass Harvesting
John Deere
OEM NUMBER
CC26700
PART NUMBER
55911400
OEM NUMBER
CC50001
PART NUMBER
CC50001
OEM NUMBER
DC23368
PART NUMBER
81103573
OEM NUMBER
DC35660
PART NUMBER
DC35660
SIZE
16 x 22 x 16
OEM NUMBER
CC26358
PART NUMBER
CC26358
TYPE
Pin
Bolt
Nut
OEM NUMBER
CC19048
CC118811
A31869
PART NUMBER
CC19048
CC118811
A31869
OEM NUMBER
CC19240
PART NUMBER
CC19240
OEM NUMBER
CC20334
PART NUMBER
83030002
OEM NUMBER
DC33867
PART NUMBER
DC33867
www.mchc.ie
16
Grass Harvesting
John Deere
Wheel Bearings / Kits to suit John Deere Grass Mowers
www.mchc.ie
TO SUIT MODELS
DESCRIPTION
1360, 1365
Inner bearing
Outer bearing
Oil seal 40 x 56 x 10
Wheel bearing kit
including inner bearing,
outer bearing and oil
seal
16a
ECONOMY
KOYO
PART NUMBER
PART NUMBER
6934969310
6934969310E
6704867010E
6704867010
405610
BK033E
BK033
Grass Harvesting
John Deere
2
3
SERIES
ENDS
TO SUIT MODELS
1 3/8" 6 spline Yoke /
W2500
free wheel on tubing and
1365 Mower
flange for clutch mower drive
1 3/8" 6 spline Yoke QR /
W2500
1360 / 1365 Mower
21 spline 1 3/8" M14 Bolt
1 3/8" 6 spline Yoke QR /
W2500
1365 Mower
hex end (3618135)
Over run joint for hook up
1350 - 1365
F5 freewheel c/w S4 tube
Replacement guard to suit tractor to mower shafts
APPLICATION
PART NUMBER
WWE25801260
W2510103610111
W2510103618135
5611742
SD251000
DESCRIPTION
OEM NUMBER
PART NUMBER
AW24688
360000
DC28998
368300
W38281
3613100
W37527
3614100
DC31592
361006
3610111
361008
DC39151
3618135
www.mchc.ie
17
Grass Harvesting
John Deere
6000 Series
7000
7500
www.mchc.ie
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 170
Width: 73
Curl ID: 28
Thickness: 5
Pick up tine
CC25176
Knife
Z69500
Sharpening stone
AZ53757
Length: 170
Width: 73
Curl ID: 28
Thickness: 5
Pick up tine
CC25176
Knife
Z81123
Sharpening stone
AZ56626
Length: 170
Width: 73
Curl ID: 28
Thickness: 5
Pick up tine
CC25176
Knife
Z69500
Sharpening stone
AZ56626
18
Grass Harvesting
John Deere
TO SUIT
MODELS
AIR
INNER
AIR
OUTER
6850 - 6950
AF25229M
(AZ45867)
AF25228M
(AZ45868)
6810 - 6910
AF820M
(U44956)
7200-7300
AF25229M
(AZ45867)
7000 Series
7400, 7800
AF25230
(AZ61134)
FUEL
FUEL /
WATER
SEP.
FF5506
FS19574
(RE506428) (RE502203)
OIL
HYDRAULIC
LF9010
HF6338
(RE58935) (AT120444)
LF3363
(RE21058)
Cummins
Engine
AF4583M
FS1212
LF3000
HF6338
(AZ39761)
(RE42050)
(RE44647) (AT120444)
Engine
bypass
LF777
(RE42051)
7200-7300
7200
7200
AF25228M
FF5768
LF16043
(AZ45868)
(R502778)
(RE509672)
7300-7700
7300-7700
7200
HF28813
FF5716
LF9010
FS19688
(AZ64238)
7400, 7800
(RE507284) (RE522372) (RE58935)
AF25062
7800
7800
(AZ61133)
FS1007
LF9070
(PMFS1007)
(PMLF9000)
HYDROSTATIC
TRANSMISSION
HF6557
(AH128449)
HF6557
(AH128449)
HF6557
(AH128449)
HF30747
(AL112936)
www.mchc.ie
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 170
Width: 73
Curl ID: 28
Thickness: 5
Pick up tine
CC25176
Length: 388
Width: 195
Thickness: 5
Knife
CC45488
Length: 170
Width: 73
Curl ID: 28
Thickness: 5
Pick up tine
CC25176
Length: 360
Width: 200
Thickness: 5
Hole size: 21
Knife
CC45141
Length: 365
Width: 202
Thickness: 5
Hole size: 23
Knife
CC52821
19
Grass Harvesting
John Deere
PART NUMBER
WWE24801560K64/22R
WWE24801474HALF
SD251500INNERLT
SDF251500OUTERLT
DESCRIPTION
OEM NUMBER
PART NUMBER
AW23612
350600
AW23611
350000
AW24191
351310
E75143
351410
DC34615
358310
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
20
Grass Harvesting
Kemper / Kidd
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 180
Width: 58
Curl ID: 27
Thickness: 5
Pick up tine
FH2035333
Length: 440
Width: 300
Thickness: 5
Hole size: 18.5
Knife
60810
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 18
Length: 140
Width: 43
Thickness: 5
LH blade
(Box Qty 25)
0591152
Cargo 8200L
www.mchc.ie
TYPE
21
Grass Harvesting
Krone
TYPE
DIMENSIONS
LH Shown
Hole Size: 19
Length: 94
Width: 40
Thickness: 3
LH Shown
DESCRIPTION
LH Twisted blade
(Box Qty 25)
OEM NUMBER
PART NUMBER
1474192
RH Twisted blade
(Box Qty 25)
1473021
Thread: M12
Length: 30
Width: 32
Collar: 18
Blade holder
137.726.6
141.053.4
909.602.1
1377266
V Belt
SPB2840
(3 per mower)
Hole Size: 19
Length: 112
Width: 48
Thickness: 4
LH Twisted blade
(Box Qty 25)
1398880
RH Twisted blade
(Box Qty 25)
1398890
W300E1010
These models of Krone Grass Mowers use the W2300 series of PTO shafts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
Hole Size: 19
Length: 116
Width: 48
Thickness: 4
Hole Size: 19
Length: 96
Width: 48
Thickness: 4
LH Shown
Formed blade
(Box Qty 25)
LH Twisted blade
(Box Qty 25)
RH Twisted blade
(Box Qty 25)
1398000
1466900
1466910
TYPE
DIMENSIONS
RH shown
Length: 388
Width: 134
Curl ID: 45
Thickness: 9.5
16 x 650 x 8
DESCRIPTION
LH Rotation
tine (White)
OEM NUMBER
PART NUMBER
153.015.1
1530151
RH Rotation
tine (Green)
153.014.1
1530141
16X650X8X6
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
22
Grass Harvesting
Krone
KS 6.21-20 Duo
KS 6.51-20 Duo
KS 6.21-6.81 Duo
KS 6.81-7.61 Duo
12.5 Swadro 421 to 1500
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 630
Width: 99
Curl ID: 45
Thickness: 10
LH Rotation
outer tine
(Yellow)
2650120
Length: 630
Width: 99
Curl ID: 45
Thickness: 10
RH Rotation
outer tine
(Yellow)
2650100
Length: 625
Width: 99
Curl ID: 45
Thickness: 10
LH Rotation
inner tine
(Yellow)
2650130
Length: 625
Width: 99
Curl ID: 45
Thickness: 10
RH Rotation
inner tine
(Yellow)
2650110
Fixing plate
153.014.1 / 015.1
265.010.0 / 011.0
265.012.0 / 013.0
001530210N
M12 x 90
10.9 strength
M1290931109
M12
M12DIN985
16 x 650 x 8
16X650X8X6
Length: 640
Width: 70
Thickness: 9.5
Tine
2684050
Fixing plate
153.014.1 / 015.1
265.010.0 / 011.0
265.012.0 / 013.0
001530210N
M12100DIN931
M12DIN985
M12DIN125A
M12 x 100
M12
M12
Swadro 900
www.mchc.ie
16 x 650 x 8
16X650X8X6
Type: K33B
Hub: 1 3/8" 6 spl.
Torque: 90 daNm
556630390
23
Grass Harvesting
Krone
Titan 640GL,
Titan 4/25L
Titan 4/32L
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 145
Width: 62
Curl ID: 22
Thickness: 5
Pick up tine
9381480
9381481
9381480
Length: 500
Width: 246
Thickness: 6
Hole size: 10
Knife
332.970.0
3329700
Length: 145
Width: 62
Curl ID: 22
Thickness: 5
Pick up tine
9381480
9381481
9381480
Length: 373
Width: 185
Thickness: 5
Knife
3472167
Length: 423
Width: 267
Thickness: 6
Hole size: 10
Knife
334.899.0
333.786.0
Length: 145
Width: 75
Curl ID: 27
Thickness: 5.5
Pick up tine
9381580
212300500
9381580
Length: 364
Width: 120
Thickness: 3.5
Hole size: 29.5
Knife
3451442
9379633
Length: 145
Width: 75
Curl ID: 27
Thickness: 5.5
Pick up tine
9381580
212300500
9381580
Length: 400
Width: 120
Thickness: 3.5
Hole size: 30 & 6
Knife
233.917.60
23391760
Length: 145
Width: 62
Curl ID: 22
Thickness: 5
Pick up tine
9381480
9381481
9381480
Length: 380
Width: 260
Thickness: 6
Hole size: 10
Knife
332.960.0
3329600
Turbo 6/40
XL, XXL
HSD, HSL,
TS (Turbo) Micro Chop
HSD, HSL,
TS (Turbo)
TITAN 4/25L,
TITAN 4/32L
www.mchc.ie
24
3348990
(35 per machine)
Grass Harvesting
Krone
DIMENSIONS
Length: 145
Width: 75
Curl ID: 28
Length: 145
Width: 75
Curl ID: 27
DESCRIPTION
Thickness: 5
Pick up tine
(Black)
Thickness: 5.5
Pick up tine
(Yellow)
OEM NUMBER
PART NUMBER
212300500
212200500
9381580
9381580
Length: 160
Width: 74
Curl ID: 28
Thickness: 5.5
Pick up tine
9380403
Galvanised
Pick up tine
9382750G
Painted (Yellow)
Pick up tine
9382750
212827500
Length: 300
Width: 168
Thickness: 5
Knife
2759951
290
Length: 290
Width: 200
Thickness: 5
Knife
2777610
2793490
300
Length: 300
Width: 168
Thickness: 5
Knife
2759951
Length: 145
Width: 62
Curl ID: 22
Thickness: 5
Pick up tine
9381480
9381481
9381480
Galvanised
Pick up tine
9382750G
Painted (Yellow)
Pick up tine
9382750
212827500
Length: 290
Width: 200
Thickness: 5
Knife
2777610
2793490
15 x 600 x 6
4 PLY Tyre
c/w tube
15X600X6X4
Width: 99
Height: 93
Depth: 50
4 Function lamp
21093021
TYPE
Length: 155
Width: 59
Curl ID: 22
Thickness: 5
KR130 Chopper
Length: 155
Width: 59
Curl ID: 22
Thickness: 5
Roundpack 1250
These models of Krone Grass Mowers use the W2480 series of PTO shafts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
Roundpack 1250 MC
Comprima 125 XC
Comprima 155 XC
www.mchc.ie
Length: 145
Width: 62
Curl ID: 22
Thickness: 5
Length: 155
Width: 59
Curl ID: 22
Thickness: 5
25
Pick up tine
9381480
9381481
9381480
Galvanised
Pick up tine
9382750G
Painted (Yellow)
Pick up tine
9382750
212827500
Grass Harvesting
Krone / Kuhn
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
ID: 15
OD: 40
Height: 15.9
Cam bearing
9380810
LR52022RS
DESCRIPTION
LH Blade
(Box Qty 25)
OEM NUMBER
PART NUMBER
K6804710
RH Blade
(Box Qty 25)
K6804720
TYPE
DIMENSIONS
RH Shown
LH Blade
(Box Qty 25)
55903210
55903210
RH Shown
RH Blade
(Box Qty 25)
55903310
55903310
Thread: M12
Length: 33
Width: 30
Collar: 18
Original
blade holder
56115800
Economy
blade holder
56115800E
Various models
GMD 400
SPB2500
GMD 500
GMD 600
V Belt
GMD 700
SPBX2900
GMD 800
These models of Kuhn Grass Mowers use the W2400 series of PTO parts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
LH Blade
Hole Size: 18.25
55903210
55903210
(Box Qty 25)
Length: 107
Width: 45
RH Blade
55903310
55903310
Thickness: 4
RH Shown
(Box Qty 25)
V Belt
FC 240P, FC 280P,
FC 240F, FC 280F
GMD 801
GMD 602 / 702 / 802 F
Alterna 400 / 500 / 500R
FC 250, FC 250G,
FC 250GT, FC 300
FC 300G, FC 300GT
Thread: M12
Length: 33
Width: 30
Collar: 18
Original
blade holder
Thread: M12
Length: 33
Width: 30
Collar: 18
Original
blade holder
56115800
Economy
blade holder
56115800E
V Belt
Early Models
SPB1500
(3 per mower)
56115800
Economy
56115800E
blade holder
These models of Kuhn Grass Mowers use the W2400 series of PTO parts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
LH Blade
Hole Size: 18.25
55903210
55903210
(Box Qty 25)
Length: 107
Width: 45
RH Blade
55903310
55903310
Thickness: 4
RH Shown
(Box Qty 25)
www.mchc.ie
26
Grass Harvesting
Kuhn
GMD 44 / 55 / 66 / 77 HD
TYPE
DIMENSIONS
LH Shown
LH Shown
LH Shown
DESCRIPTION
LH Twisted blade
(Box Qty 25)
OEM NUMBER
PART NUMBER
56151200
RH Twisted blade
(Box Qty 25)
56151300
LH Blade
(Box Qty 25)
56151210
RH Blade
(Box Qty 25)
56151310
LH Twisted blade
(Box Qty 25)
56451200
RH Twisted blade
(Box Qty 25)
56451300
Thread: M10
Length: 28
Width: 30
Collar: 16
Original
blade holder
56210100
56210100
Economy
blade holder
56210100E
V Belt
SPB2500
(4 per mower)
These models of Kuhn Grass Mowers use the W2400 series of PTO parts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
OEM NUMBER
PART NUMBER
55911100
OEM NUMBER
PART NUMBER
55913700
OEM NUMBER
-
PART NUMBER
56812700
www.mchc.ie
27
Grass Harvesting
Kuhn
OEM NUMBER
-
PART NUMBER
56200700E
OEM NUMBER
-
PART NUMBER
56200800
OEM NUMBER
-
PART NUMBER
80201847
OEM NUMBER
-
PART NUMBER
55911300
LH PROFILE
PART NUMBER
GMD44 / 55 / 66 / 77 / HD (Disc 1)
56205800
GMD44 / 55 / 66 / 77 / HD (Disc 2)
56190600
OEM NUMBER
-
PART NUMBER
56809300
OEM NUMBER
PART NUMBER
55922000
OEM NUMBER
PART NUMBER
55922130
www.mchc.ie
28
Grass Harvesting
Kuhn
www.mchc.ie
28a
OEM NUMBER
-
PART NUMBER
56192300
Grass Harvesting
Kuhn
Stone Guard to suit Kuhn Mowers
TO SUIT MODELS
FC250 / 250G / 250GT / 300 / 300G / 300GT
Alterna 400 / 500 / 500R
FC200 to 1988, FC202 from 1989
OEM NUMBER
PART NUMBER
Economy type
55901200E
OEM NUMBER
-
PART NUMBER
05901200
OEM NUMBER
-
PART NUMBER
55910400
OEM NUMBER
-
PART NUMBER
55911400
OEM NUMBER
PART NUMBER
55903900
OEM NUMBER
-
PART NUMBER
55911500
OEM NUMBER
PART NUMBER
81103573
OEM NUMBER
PART NUMBER
56131500
www.mchc.ie
29
OEM NUMBER
PART NUMBER
99462792
56480410
Grass Harvesting
Kuhn
OEM NUMBER
-
PART NUMBER
56142810
OEM NUMBER
-
PART NUMBER
56202510
OEM NUMBER
-
PART NUMBER
56202410
OEM NUMBER
-
PART NUMBER
55900110
OEM NUMBER
-
PART NUMBER
56206200
OEM NUMBER
-
PART NUMBER
56207000
OEM NUMBER
-
PART NUMBER
56144900
OEM NUMBER
-
PART NUMBER
83040052
www.mchc.ie
30
Grass Harvesting
Kuhn
Bush to suit Kuhn Mowers
Application:
Disc drive
TO SUIT MODELS
GMD44 / 55 / 66 / 77 / HD
OEM NUMBER
-
PART NUMBER
56145900
TO SUIT MODELS
GMD44 / 55 / 66 / 77 / HD
OEM NUMBER
-
PART NUMBER
56123500
140
14
126
Depth: 21
50.5
100
Main drive
TO SUIT MODELS
FC250 / 300
OEM NUMBER
-
PART NUMBER
83030002
DESCRIPTION
Bed bolt to suit Kuhn
Bed bolt to suit Kuhn
Bed bolt to suit Kuhn
Bed bolt to suit Kuhn
Bed bolt to suit Kuhn
PART NUMBER
80131016
80131025
80131030
80131035
80131045
DESCRIPTION
Lock Nut to suit Kuhn bed bolt
PART NUMBER
80201051
OEM NUMBER
-
PART NUMBER
55900800
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
31
Grass Harvesting
Kuhn
GF5001TH, GF5801MH
GF5801MHO, GF6401T
GF6401MHO, GF6401MH
GF7501MH, GF7601MH
GF7601MHO, GF8501MH
GF8501T, GF8501TO
GF10601TO
GA300GT, GA3200GT,
GA3501S,
GA381GM-GT,
GA4101GM-GT, GA682,
GA732, GA7301,
GA7302GL
TYPE
DIMENSIONS
LH Shown
Length: 387
Width: 110
Curl ID: 51
Thickness: 9.5
M14 x 50
M14
www.mchc.ie
RH Rotation
tine
M14 Bolt for
fitting tine
M14 Lock nut
for fitting tine
OEM NUMBER
PART NUMBER
58740600
58740700
M1450DIN931
M14DIN985
15 x 600 x 6
4 PLY Tyre
c/w tube
15X600X6X4
Length: 386
Width: 111
Curl ID: 51
Thickness: 9.5
Tine
57609000
M1450DIN931
M14DIN985
15X600X6X4
M14 x 50
M14
M14 Bolt
for fitting tine
M14 Lock nut
for fitting tine
15 x 600 x 6
4 PLY Tyre
c/w tube
M12 x 75
M12 Bolt
for fitting tine
M1275DIN931
M12
M12 HD Washer
for fitting tine
M12DIN7349
15 x 600 x 6
4 PLY Tyre
c/w tube
Length: 490
Width: 99
Curl ID: 44
Thickness: 8.5
Tine
57502000
Fixing set
57502100KN
400 x 8
4 PLY Tyre
c/w tube
400X8X4T510
Length: 405
Width: 111
Curl ID: 46
Thickness: 9.4
Tine
57601100
15 x 600 x 6
4 PLY Tyre
c/w tube
GIRO GRS 20 / 21
GF 5000H
DESCRIPTION
LH Rotation
tine
32
15X600X6X4
15X600X6X4
Grass Harvesting
Kuhn
i-BIO
www.mchc.ie
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 420
Width: 235
Thickness: 5
Knife
Z45590
32a
Grass Harvesting
Deutz-Fahr - Kverneland
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 19
Length: 90
Width: 40
Thickness: 3
Flat blade
(Box Qty 25)
1101901027120
90
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
(Box Qty 25)
1101203011500
06561542
96
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
Super Radura
(Box Qty 25)
96SR
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Cranked blade
(Box Qty 25)
1101701015300
TT97
96C
Hole Size: 21
Length: 105
Width: 47
Thickness: 3
Cranked blade
(Box Qty 25)
CM120Z
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
(Box Qty 25)
1101203011500
06561542
96
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
Super Radura
(Box Qty 25)
96SR
Hole Size: 10
Hole Distance: 55
Length: 140
Width: 84
Blade holder
Hole Size: 10
Hole Distance: 47
Length: 225
Width: 85
Blade holder
Hole Size: 19
Hole Distance: 55
Length: 205
Width: 95
Blade holder
M12 x 25
Countersunk
screw
V-Belt
V-Belt
V-Belt
V-Belt
KM20, KM22
www.mchc.ie
TYPE
33
Pre 1970
06580017
VF0658.0017
Later KM20
06580109
VF0658.0109
Later KM22
06563514
VF0656.3514
M1225DIN7991
KM20 to
serial no. 5100
KM20 from
serial no. 5101
KM22 to
serial no. 21569
KM22 from
serial no. 21570
SPA2782
(3 per mower)
SPA2832
(3 per mower)
SPA2882
(4 per mower)
SPA2932
(4 per mower)
Grass Harvesting
Deutz-Fahr - Kverneland
TYPE
KM2.17, KM2.19,
KM2.23, KM2.33
KM2027 (Drum)
SM 40 / 45 / 50 / 50F /
55F (Disc)
KM3.33, KM4.33,
KM5.26, KM5.29,
KM5.30, KM5.30FZ,
KM5.90,
SM2.17, SM4.24,
SM5.26F, SM5.30FHPC,
SM5.30TC, SM5.32
KMA4.30, KM4.30,
KM4.30FS,
KM4.30FS-HPC,
SM4.21, SM5.28
KM3.18, KM3.19S,
KM3.23FS, KM3.23S,
KM3.23STC, KM3.27,
KM3.27FS, KM3.29,
KM3.29FS, KM3.90,
KM4.27, KM4.29, KM4.90
www.mchc.ie
LH Shown
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
(Box Qty 25)
96
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
Super Radura
(Box Qty 25)
96SR
Hole Size: 12
Hole Distance: 55
Length: 214
Width: 95
Blade holder
VF1650.0771
16500771
Bolt to suit
blade holder
M1225DIN7991
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
LH Blade
16502727
06561547
RH Blade
16502726
06561546
Blade holder
Drum mower
16501922
LH Twisted blade
(Box Qty 25)
58699
RH Twisted blade
(Box Qty 25)
58700
LH Twisted blade
(Box Qty 25)
90261559
RH Twisted blade
(Box Qty 25)
90261560
LH Twisted blade
(Box Qty 25)
TF71
RH Twisted blade
(Box Qty 25)
TF70
LH Shown
LH Shown
LH Shown
Hole Size: 19
Length: 93
Width: 48
Thickness: 3
34
Grass Harvesting
Deutz-Fahr - Kverneland
OEM NUMBER
-
PART NUMBER
06563516
OEM NUMBER
-
PART NUMBER
GT061E
OEM NUMBER
-
PART NUMBER
06567882
OEM NUMBER
-
PART NUMBER
06580818
OEM NUMBER
-
PART NUMBER
GT062E
OEM NUMBER
-
PART NUMBER
GT60E
Saucer
TO SUIT MODELS
KM3.16
www.mchc.ie
OEM NUMBER
-
35
PART NUMBER
GT71
Grass Harvesting
Deutz-Fahr - Kverneland
OEM NUMBER
-
PART NUMBER
06563480
OEM NUMBER
-
PART NUMBER
06580801
OEM NUMBER
-
PART NUMBER
GT246
OEM NUMBER
-
PART NUMBER
06228352
OEM NUMBER
-
PART NUMBER
06228357
Drum drive
TO SUIT MODELS
KM20, KM22 / 22CR, KM24 / 24CR
OEM NUMBER
-
PART NUMBER
06580765
Input Shaft
TO SUIT MODELS
KM20, KM22
OEM NUMBER
-
PART NUMBER
06568455
Drum drive
TO SUIT MODELS
KM3.16
OEM NUMBER
-
PART NUMBER
GT256E
Main drive
TO SUIT MODELS
KM3.16
www.mchc.ie
36
OEM NUMBER
-
PART NUMBER
GT98
Grass Harvesting
Deutz-Fahr - Kverneland
TO SUIT MODELS
KM20, KM22 to 1970, KM22 / 22CR
OEM NUMBER
-
PART NUMBER
06228344
Cutting disc
TO SUIT MODELS
KM20, KM22 / 22CR, KM24 / 24CR
OEM NUMBER
-
PART NUMBER
M1225DIN7991
Cutting disc
TO SUIT MODELS
KM22 / 22CR, KM24 / 24CR, KM25
OEM NUMBER
-
PART NUMBER
06228349
Main drive
TO SUIT MODELS
SM45 / 45CR, KM2.17, KM2.19 / 2.19S, KM22
/ 22CR, KM24 / 24CR
OEM NUMBER
PART NUMBER
06567746
OEM NUMBER
-
PART NUMBER
06228389
TO SUIT MODELS
KM20, KM22 / 22CR
25 x 30 x 26.5
TO SUIT MODELS
-
OEM NUMBER
-
PART NUMBER
06215125
Drum shaft
TO SUIT MODELS
KM20, KM22
06215644
Shown
OEM NUMBER
-
www.mchc.ie
PART NUMBER
06228340
SIDE
Left hand
Right hand
37
OEM NUMBER
VF 0621.5644
VF 0621.5645
PART NUMBER
06215644
06215645
Grass Harvesting
Deutz-Fahr - Kverneland
Ring to suit Deutz-Fahr - Kverneland
Application:
Main pivot
TO SUIT MODELS
KM20, KM22 / 22CR, KM24 / 24CR, SM45 /
45CR, KM25
OEM NUMBER
PART NUMBER
06228342
OEM NUMBER
PART NUMBER
06563635
OEM NUMBER
-
PART NUMBER
06228402
TO SUIT MODELS
SM45 / 45CR, KM2.17, KM2.19 / 2.19S, KM22
/ 22CR, KM24 / 24CR
www.mchc.ie
OEM NUMBER
-
38
PART NUMBER
01133010
Grass Harvesting
Deutz-Fahr - Kverneland
TYPE
Apollo
DIMENSIONS
DESCRIPTION
Length: 390
Width: 105
Curl ID: 41
Thickness: 8.9
LH Tine
OEM NUMBER
VF1650.2741
VF0658.0647
PART NUMBER
106403012900
RH Tine
VF1650.2742
VF0658.0648
106403013000
LH Tine
VF0622.9776
104000150010
RH Tine
VF0622.9777
104000150110
Length: 375
Width: 104
Curl ID: 51
Thickness: 10
Tedder tine
16502744
Length: 630
Width: 93
Curl ID: 40
Thickness: 9
Swather tine
16504331
Length: 375
Width: 110
Curl ID: 60
Thickness: 10
Tine
1660756486
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
MP130
Length: 168
Width: 64
Curl ID: 27.5
Thickness: 5.5
Pick up tine
16618933
Length: 170
Width: 62
Curl ID: 28
Thickness: 5.5
Pick up tine
06296285
Length: 390
Width: 200
Thickness: 5
Hole size: 22
Knife
16613168
Length: 385
Width: 180
Thickness: 5
Hole size: 22
Knife
16518393
LH Shown
Centipede
LH Shown
Length: 370
Width: 105
Curl ID: 35
Thickness: 9
TYPE
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
39
Grass Harvesting
PZ - Kverneland
TYPE
CM135
CM165
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 21
Length: 105
Width: 47
Thickness: 3
Cranked blade
(Box Qty 25)
CM120Z
Hole Size: 12
Hole Distance: 80
Length: 575
Width: 126
Blade holder
to suit CM135
PZ87
Hole Size: 18
Hole Distance: 75
Length: 275
Width: 125
Blade holder
to suit CM165
PZ116
V-Belt
to suit CM135
V-Belt
o suit CM165
V-Belt
to suit CM165
LH Twisted blade
(Box Qty 25)
RH Twisted blade
(Box Qty 25)
V-Belt
V-Belt
Hole Size: 19
Length: 90
Width: 40
Thickness: 3
Flat blade
(Box Qty 25)
90
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
(Box Qty 25)
96
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
Super Radura
(Box Qty 25)
96SR
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Cranked blade
(Box Qty 25)
96C
Hole Size: 21
Length: 105
Width: 47
Thickness: 3
Flat blade
(Box Qty 25)
CM15
DM303
LH Shown
LH Shown
Hole Size: 19
Length: 93
Width: 48
Thickness: 3
RH Twisted blade
(Box Qty 25)
LH Shown
Hole Size: 21
Length: 105
Width: 48
Thickness: 3
LH Twisted blade
(Box Qty 25)
RH Twisted blade
(Box Qty 25)
CM260
CM260H
CM300H
LH Shown
www.mchc.ie
40
LH Twisted blade
(Box Qty 25)
RH Twisted blade
(Box Qty 25)
LH Twisted blade
(Box Qty 25)
SPA2482
(4 per mower)
SPA2847
(4 per mower)
SPB2840
(3 per mower)
90261559
90261560
SPB3150
(5 per mower)
SPB3350
(5 per mower)
DM304
-
TF71
TF70
CM137
CM138
Grass Harvesting
PZ - Kverneland
CM185, CM190
CM210
www.mchc.ie
TYPE
DIMENSIONS
LH Shown
Hole Size: 19
Length: 93
Width: 48
Thickness: 3
DESCRIPTION
LH Twisted blade
(Box Qty 25)
RH Twisted blade
(Box Qty 25)
OEM NUMBER
PART NUMBER
TF71
TF70
Hole Size: 14
Hole Distance: 75
Length: 180
Width: 125
Blade holder
to suit CM185,
CM190
PZ0250
Hole Size: 21
Length: 105
Width: 47
Thickness: 3
Cranked blade
(Box Qty 25)
CM120Z
Hole Size: 14
Hole Distance: 75
Length: 210
Width: 125
Blade holder
to suit CM210
PZ0243
40a
Grass Harvesting
PZ - Kverneland
OEM NUMBER
OEM NUMBER
PART NUMBER
GT061E
PART NUMBER
MT71
Drum blade
to suit GT061E
OEM NUMBER
-
PART NUMBER
CM059
OEM NUMBER
-
PART NUMBER
GT062E
OEM NUMBER
-
PART NUMBER
CM060E
OEM NUMBER
-
PART NUMBER
GT60E
Saucer
TO SUIT MODELS
CM165 / 166 / 170
OEM NUMBER
-
PART NUMBER
GT71
www.mchc.ie
41
OEM NUMBERS
-
PART NUMBER
GT246
Grass Harvesting
GT57
ET177
PZ - Kverneland
Bolt to suit PZ - Kverneland Mowers
Application:
TO SUIT MODELS
CM165
CM186 / 186 / 189 / 190 / 210 / 211 / 212 / 230
OEM NUMBER
-
PART NUMBER
GT57
ET177
Drum drive
TO SUIT MODELS
CM165 / 166 / 170
PARTS TO SUIT
OEM NUMBER
OEM NUMBER
PART NUMBER
GT256E
PART NUMBER
ND8072V
OEM NUMBER
-
PART NUMBER
GT64
Circlip
to suit GT256E
OEM NUMBER
-
PART NUMBER
TC94
TEETH
14
OEM NUMBER
-
PART NUMBER
ST44
TEETH
29
OEM NUMBER
-
PART NUMBER
ST45PZ
www.mchc.ie
OEM NUMBER
-
42
PART NUMBER
GT65
Grass Harvesting
PZ - Kverneland
Shaft to suit PZ - Kverneland (25mm)
Application:
TO SUIT MODELS
CM165 / 166
OEM NUMBER
-
PART NUMBER
GT17E
TO SUIT MODELS
CM165 / 166 / 170
OEM NUMBER
-
PART NUMBER
GT98
OEM NUMBER
-
PART NUMBER
CH17
OEM NUMBER
-
PART NUMBER
GT84
OEM NUMBER
-
PART NUMBER
MT301
OEM NUMBER
-
PART NUMBER
CH114
OEM NUMBER
-
PART NUMBER
MT34
OEM NUMBER
-
PART NUMBER
CH180
OEM NUMBER
-
PART NUMBER
MT174
OEM NUMBER
-
PART NUMBER
MT179LH
MT179RH
www.mchc.ie
THREAD
Left hand
Right hand
43
Grass Harvesting
PZ - Kverneland
Allen Screw to suit PZ - Kverneland Mowers
TO SUIT MODELS
CM135
OEM NUMBER
-
PART NUMBER
MT36
OEM NUMBER
-
PART NUMBER
GT72
OEM NUMBER
-
PART NUMBER
30268120
OEM NUMBER
-
PART NUMBER
M10VR
OEM NUMBER
-
PART NUMBER
PZ58
PZ72
APPLICATION
Main drive
Drum drive
OEM NUMBER
-
PART NUMBER
TH0079
TH0078
OD
33
37
61.8
72
SHIMS IN SET
8
8
8
5
OEM NUMBER
-
PART NUMBER
MT0062
MT00310
MT0063
TH00145
OEM NUMBER
-
PART NUMBER
31425007
www.mchc.ie
OEM NUMBER
VN40130207
44
PART NUMBER
40130207
Grass Harvesting
PZ - Kverneland
Bush to suit PZ - Kverneland Mowers
TO SUIT MODELS
TK210A / 210D
OEM NUMBER
-
PART NUMBER
TH9
OEM NUMBER
-
PART NUMBER
MT365
OEM NUMBER
-
PART NUMBER
MT357
OEM NUMBER
-
PART NUMBER
RT120
OEM NUMBER
-
PART NUMBER
17870664
OEM NUMBER
-
PART NUMBER
MT374
OEM NUMBER
-
PART NUMBER
PZ51
www.mchc.ie
45
OEM NUMBER
PART NUMBER
ND9905
Grass Harvesting
PZ - Kverneland
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
LH Tine
PZ339
LH Shown
Length: 405
Width: 111
Curl ID: 42
Thickness: 9
RH Tine
PZ340
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 293
Width: 64
Curl ID: 35
Thickness: 6
Spring tine
VG PZ9
PZ9
Fixing set
HK60
Swather tine
VG PZ114
PZ114
Length: 375
Width: 113
Curl ID: 42
Thickness: 9
RH Haybob
narrow rotary tine
PZ106
(Yellow)
PZ106
LH Haybob
narrow rotary tine
PZ107
(Blue)
PZ107
Length: 375
Width: 113
Curl ID: 42
Thickness: 9
RH Haybob wide
rotary tine
PZ111
(Yellow)
PZ111
LH Haybob wide
rotary tine
PZ110
(Blue)
PZ110
Length: 54
Curl ID: 17.5
Thickness: 2.5
LH Haybob spring
PZ99
RH Haybob spring
PZ100
Fixing set
TH200
Diameter: 6
Length: 40
Roll pin
6X40
Length: 360
Width: 110
Curl ID: 42
Thickness: 9
Swather tine
PZ280
OEM NUMBER
-
PART NUMBER
PZ171
Fanex 400
TYPE
Haymaker
LH Shown
LH Shown
Haybob
LH Shown
www.mchc.ie
46
Grass Harvesting
PZ - Kverneland
Tine Holders to suit PZ - Kverneland Haybobs
TH0108 Shown
TO SUIT MODELS
Strela Haybob, Strela Haybob 300
Strela Haybob, Strela Haybob 300
SIDE
Left hand
Right hand
PART NUMBER
TH0109
TH0108
OEM NUMBER
-
PART NUMBER
TH42
OEM NUMBER
-
PART NUMBER
TH93
OEM NUMBER
-
PART NUMBER
TH107
OEM NUMBER
PART NUMBER
TH00137
OEM NUMBER
PART NUMBER
TH2
OEM NUMBER
-
PART NUMBER
TH141
OEM NUMBER
-
PART NUMBER
TH062
www.mchc.ie
OEM NUMBER
-
47
PART NUMBER
TH33
Grass Harvesting
PZ - Kverneland
Deflectors to suit PZ - Kverneland Haybobs
Supplied fully assembled
TO SUIT MODELS
Strela Haybob
Strela Haybob
PARTS TO SUIT
Replacement tine to suit
SIDE
Left hand
Right hand
OEM NUMBER
VG PZ114
PART NUMBER
TH00117LH
TH00118RH
PART NUMBER
PZ114
SIDE
Left hand
Right hand
OEM NUMBER
VG PZ114
PART NUMBER
TH00209
TH00208
PART NUMBER
PZ114
OEM NUMBER
VG PZ114
PART NUMBER
PZ114
SIDE
Left hand
Right hand
PART NUMBER
TH115
TH116
OEM NUMBER
-
PART NUMBER
TH125
PART NUMBER
PZ301
OEM NUMBER
-
PART NUMBER
JH66
OEM NUMBER
-
PART NUMBER
PZ300
www.mchc.ie
48
OEM NUMBER
PART NUMBER
PZ115
Grass Harvesting
PZ - Kverneland
Circlip to suit PZ - Kverneland Haybob
TO SUIT MODELS
Haybob
HS360
OEM NUMBER
VG PZ117V
PART NUMBER
PZ48
PZ117
OEM NUMBER
-
PART NUMBER
TH94
OEM NUMBER
-
PART NUMBER
GT103
OEM NUMBER
-
PART NUMBER
GT37
OEM NUMBER
-
PART NUMBER
PZ108
OEM NUMBER
-
PART NUMBER
PZ281V
www.mchc.ie
49
OEM NUMBER
-
PART NUMBER
ND9091
Grass Harvesting
PZ - Kverneland
Wheel to suit PZ - Kverneland Haybob
Complete with tyre, tube and wheel cap
TO SUIT MODELS
Haybob, HS360
PARTS TO SUIT
OEM NUMBER
OEM NUMBER
PART NUMBER
ND9827
PART NUMBER
ND9620
Spacing tube to
suit ND9827 rim
TH66
OEM NUMBER
PART NUMBER
TH00114
OEM NUMBER
PART NUMBER
HK0105A
DIMENSIONS
350 x 8
15 x 600 x 6
PROFILE
R3B
Line
PLY
4
4
PART NUMBER
350X8X4
15X600X6X4
1
2
SERIES
ENDS
TO SUIT MODELS
APPLICATION
1 3/8" 6 spline Yoke /
CM135, CM165 etc Drum mower PTO shaft
W2300
1 3/8" 6 spline F5 freewheel
1 3/8" 6 spline Yoke /
W2200
1 3/8" 6 spline K33 clutch
Haybob
(clutch rating 600 dnm)
Haybob guard to suit PZ - Kverneland
Haybob guard cone to suit PZ - Kverneland
Cam & spring kit to suit K33 clutch. Contains: 8 cams, inner & outer springs
www.mchc.ie
50
PART NUMBER
W300E610F5
W221110K33
SD151000WA
8515101
AGRASET106
Grass Harvesting
Taarup - Kverneland
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
1116, 1210
Hole Size: 21
Length: 105
Width: 47
Thickness: 3
Cranked blade
(Box Qty 25)
CM120Z
Hole Size: 19
Length: 93
Width: 48
Thickness: 3
LH Twisted blade
(Box Qty 25)
TF71
RH Twisted blade
(Box Qty 25)
TF70
LH Twisted blade
(Box Qty 25)
56110900
RH Twisted blade
(Box Qty 25)
56110400
Hole: 20.5 x 23
Length: 127
Width: 47
Thickness: 4
Reversible blade
56110500
Hole: 20.8 x 23
Length: 127
Width: 50
Thickness: 4
Formed Blade
(Box Qty 25)
56110300
Hole: 20.8 x 23
Length: 163
Width: 60
Thickness: 3
Formed blade
56110200
Thread: M12
Length: 35
Width: 30
Collar: 20
Blade holder
KT56.40.3000
5640300
LH Shown
1650
RH Shown
Hole: 20.8 x 23
Length: 126
Width: 48
Thickness: 4
These models of Taarup Grass Mowers use the W2400 series of PTO parts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
www.mchc.ie
51
Grass Harvesting
Taarup - Kverneland
Belts to suit Taarup - Kverneland Mowers
TO SUIT MODELS
2428
4232
4336CR
OEM NUMBER
-
PART NUMBER
SPB3070
SPB1850
SPB1900
OEM NUMBER
PART NUMBER
56104500
OEM NUMBER
-
PART NUMBER
55656000
OEM NUMBER
PART NUMBER
56130400
OEM NUMBER
-
PART NUMBER
39677000
OEM NUMBER
-
PART NUMBER
39678000
OEM NUMBER
PART NUMBER
99462706
56202510
www.mchc.ie
OEM NUMBER
-
52
PART NUMBER
45429000
Grass Harvesting
Taarup - Kverneland
Bush to suit Taarup - Kverneland Mowers
TO SUIT MODELS
204, 205, 206, 304, 305, 306, 306B, 307,
307B, 315, 316B, 316F, 317F
OEM NUMBER
PART NUMBER
99462624
56145900
OEM NUMBER
PART NUMBER
99462643
56131500
OEM NUMBER
PART NUMBER
99462792
56480410
OEM NUMBER
-
PART NUMBER
39112000
68268000
OEM NUMBER
-
PART NUMBER
39111000
OEM NUMBER
PART NUMBER
39115000
SIDE
Left Hand
Right Hand
PART NUMBER
39113000
39113900
www.mchc.ie
OEM NUMBER
-
53
PART NUMBER
68405100
Grass Harvesting
Taarup - Kverneland
OEM NUMBER
-
PART NUMBER
99462633
Genuine Walterscheid PTO Half Shaft to suit Taarup - Kverneland Grass Mowers
No.
SERIES
ENDS
TO SUIT MODELS
APPLICATION
PART NUMBER
PWE480
43 Series Mowers
Tractor to mower
PWE4801285HALF
DESCRIPTION
W2400 Cross (32x76)
with 1 Cap grease nipple
www.mchc.ie
54
OEM NUMBER
PART NUMBER
3500141
Grass Harvesting
Taarup - Kverneland
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 375
Width: 110
Curl ID: 60
Thickness: 10
Tine
1660756486
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 152
Width: 69
Curl ID: 26
Thickness: 5
Pick up tine
59406000
59406000
Spring washer
59427000
Length: 210
Width: 70
Curl ID: 28
Thickness: 6
Pick up tine
KT 63.153.000
6315300094
1030, KV465
TYPE
OEM NUMBER
PART NUMBER
99472320
OEM NUMBER
PART NUMBER
47652000
www.mchc.ie
54a
OEM NUMBER
PART NUMBER
99472304
Grass Harvesting
Taarup - Kverneland
OEM NUMBER
PART NUMBER
99473392
OEM NUMBER
-
PART NUMBER
45244100
OEM NUMBER
PART NUMBER
40882300
OEM NUMBER
PART NUMBER
40881100
OEM NUMBER
PART NUMBER
42166000
OEM NUMBER
-
PART NUMBER
49103100
www.mchc.ie
55
OEM NUMBER
PART NUMBER
59422000
Grass Harvesting
Taarup - Kverneland
OEM NUMBER
-
PART NUMBER
45288000
OEM NUMBER
-
PART NUMBER
40684000
Knife drum
TO SUIT MODELS
DC1500
OEM NUMBER
-
PART NUMBER
45384000
OEM NUMBER
-
PART NUMBER
45430000
OEM NUMBER
-
PART NUMBER
99137314
3514mm
TO SUIT MODELS
DM1500
www.mchc.ie
56
OEM NUMBER
-
PART NUMBER
99452757
Grass Harvesting
Vicon - Kverneland
TYPE
DIMENSIONS
LH Shown
PART NUMBER
58699
RH Twisted blade
(Box Qty 25)
58700
Thread: M10
Length: 32
Width: 30
Collar: 18
Blade holder
81160K
Thread: M12
Length: 36
Width: 31
Collar: 18
Blade holder
B1374593
LH Twisted blade
(Box Qty 25)
90261559
RH Twisted blade
(Box Qty 25)
90261560
LH Twisted blade
(Box Qty 25)
TF71
RH Twisted blade
(Box Qty 25)
TF70
LH Twisted blade
(Box Qty 25)
KT5514100001
5514100001
RH Twisted blade
(Box Qty 25)
KT5514200001
5514200001
LH Twisted blade
(Box Qty 25)
56110900
RH Twisted blade
(Box Qty 25)
56110400
LH Shown
LH Shown
Hole Size: 19
Length: 93
Width: 48
Thickness: 3
LH Shown
Hole: 23 x 20.5
Length: 105
Width: 48
Thickness: 4
RH Shown
Hole: 20.8 x 23
Length: 126
Width: 48
Thickness: 4
EXTRA 828
Trailed Mower
832 Series
Trailed Mowers
www.mchc.ie
OEM NUMBER
57
DESCRIPTION
LH Twisted blade
(Box Qty 25)
Grass Harvesting
Vicon - Kverneland
OEM NUMBER
-
PART NUMBER
14941
OEM NUMBER
PART NUMBER
B2372094
www.mchc.ie
57a
OEM NUMBER
-
PART NUMBER
B1019894
Grass Harvesting
Vicon - Kverneland
OEM NUMBER
-
PART NUMBER
15923
OEM NUMBER
-
PART NUMBER
66591
OEM NUMBER
-
PART NUMBER
95860
SIZE
M10 x 20
M10 x 25
M10 x 30
CM165
OEM NUMBER
-
PART NUMBER
81616
81617
81618
OEM NUMBER
-
PART NUMBER
81822
OEM NUMBER
-
PART NUMBER
70490
www.mchc.ie
OEM NUMBER
-
58
PART NUMBER
B93
Grass Harvesting
Vicon - Kverneland
OEM NUMBER
-
PART NUMBER
70359
OEM NUMBER
-
PART NUMBER
70360
Gearbox
TO SUIT MODELS
CM165
OEM NUMBER
-
PART NUMBER
81425
W2400
1 3/8" - 6 Spline, quick release lock
F5/1 R
TO SUIT MODELS
-
OEM NUMBER
1171535
PART NUMBER
5614440
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
59
Grass Harvesting
Vicon - Kverneland
OEM NUMBER
OEM NUMBER
PART NUMBER
GT061E
PART NUMBER
MT71
Drum blade
to suit GT061E
OEM NUMBER
-
PART NUMBER
GT062E
OEM NUMBER
-
PART NUMBER
GT60E
Saucer
TO SUIT MODELS
CM168
OEM NUMBER
-
PART NUMBER
GT71
Drum drive
TO SUIT MODELS
CM168
PARTS TO SUIT
Circlip
to suit GT256E
www.mchc.ie
60
OEM NUMBER
OEM NUMBER
PART NUMBER
GT256E
PART NUMBER
ND8072V
Grass Harvesting
Vicon - Kverneland
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 375
Width: 110
Curl ID: 60
Thickness: 10
Tine
1660756486
Swather tine
VN90092611
2611
Hub plate
92671
Bracket
92672
Bearing
91649
Length: 375
Width: 104
Curl ID: 51
Thickness: 10
Tine
16502744
16 x 650 x 8
16X650X8X6
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 168
Width: 64.5
Curl ID: 27.5
Thickness: 5.5
Pick up tine
16618933
Length: 170
Width: 62
Curl ID: 28
Thickness: 5.5
Pick up tine
06296285
LH Tension
spring
VN90036182
90036182
RH Tension
spring
VN90036183
90036183
Knife
16613168
533 Tedder
Acrobat-HKX
Sprinter
CH300
www.mchc.ie
TYPE
Length: 390
Width: 200
Thickness: 5
Hole size: 22
61
Grass Harvesting
Lely
TYPE
DIMENSIONS
LH Shown
LH Shown
Splendimo
281PC & 321PC
LH Shown
Optimo C
LH Shown
Optimo EM
www.mchc.ie
DESCRIPTION
LH Twisted blade
(Box Qty 25)
OEM NUMBER
PART NUMBER
58699
RH Twisted blade
(Box Qty 25)
58700
Blade holder
4120101420
Thread: M10
Length: 32
Width: 28
Nips width: 16
4120101410
LH Twisted blade
(Box Qty 25)
58699
RH Twisted blade
(Box Qty 25)
58700
Blade holder
4120101420
Thread: M10
Length: 32
Width: 28
Nips width: 16
4120101410
V-Belt
SPB1950
LH Twisted blade
(Box Qty 25)
58699
RH Twisted blade
(Box Qty 25)
58700
Blade holder
4120101420
Thread: M10
Length: 32
Width: 28
Nips width: 16
4120101410
V-Belt
SPB2650
LH Twisted blade
(Box Qty 25)
58699
RH Twisted blade
(Box Qty 25)
58700
Blade holder
4120101420
Thread: M10
Length: 32
Width: 28
Nips width: 16
4120101410
V-Belt
SPB2360
62
Grass Harvesting
Lely
OEM NUMBER
-
PART NUMBER
4120114690
TO SUIT MODELS
Optimo EM (H/2)
OEM NUMBER
-
PART NUMBER
4120120070
TO SUIT MODELS
Optimo EM (H/2)
Optimo EM (H/2)
OEM NUMBER
-
PART NUMBER
4120104100
4120104200
OEM NUMBER
PART NUMBER
4120702280
OEM NUMBER
-
PART NUMBER
SPB1550
OEM NUMBER
-
PART NUMBER
4120301490
OEM NUMBER
-
PART NUMBER
4120114680
OEM NUMBER
-
PART NUMBER
4120103170
LENGTH
2317mm
www.mchc.ie
63
Grass Harvesting
Lely
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 283
Width: 77.5
Curl ID: 32
Thickness: 6.5
Tine
20115
Deflector
4101502170
Length: 380
Width: 98
Curl ID: 37
Thickness: 9
LH Tine
4101601490
RH Tine
4101601590
Deflector
4101502170
Length: 360
Width: 110
Curl ID: 38
Thickness: 9
LH
4104311680
RH
4104311750
15 x 600 x 6
Complete wheel
assembly
4101620300
15 x 600 x 6 x 4
15X600X6X4
LH Tine
41003208LH
RH Tine
41003208RH
Fixing set
(includes bolt, nut
and 'U' bracket)
4100201490
LH Tine
73130
RH Tine
73135
LH Tine
4102314860
4102304370
RH Tine
4102314970
4102304570
Cock Pheasant
Lotus (New)
LH Shown
4104311680 Shown
Length: 370
Width: 102
Curl ID: 36
Thickness: 9
Gemini
LH Shown
Length: 375
Width: 111
Curl ID: 42
Thickness: 9
Haymax
73135 Shown
Rotonde
LH Shown
www.mchc.ie
Length: 368
Width: 93
Curl ID: 42
Thickness: 8
64
Grass Harvesting
Lely
DESCRIPTION
OEM NUMBER
PART NUMBER
2000141
203003
203005
2023103
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
64a
Grass Harvesting
Lely
OEM NUMBER
-
PART NUMBER
4101501430
SIDE
Left hand
Right hand
PART NUMBER
4101601480
4101601580
REPLACES
4.1011.0056.0
4.1011.0057.0
PART NUMBER
4101122200
SIDE
PART NUMBER
4104610202
OEM NUMBER
PART NUMBER
4101500540
OEM NUMBER
PART NUMBER
4101500550
OEM NUMBER
-
PART NUMBER
9103600043
www.mchc.ie
65
Grass Harvesting
Lely
OEM NUMBER
-
PART NUMBER
4101501910
OEM NUMBER
-
PART NUMBER
4101500380
RP200
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 190
Width: 70
Curl ID: 30
Thickness: 5
Tine
0343.51.00.00
0940.52.25.00
0940522500
Length: 187
Width: 70
Curl ID: 30
Thickness: 5
0940.52.29.00
0940522900
Length: 365
Width: 202
Thickness: 5
Hole size: 22
Knife
0982.21.01.00
0982210100Z
ID: 11.9
OD: 35
Height: 15
Cam bearing
572113B
These models of Lely / Welger Balers use the WWE2480 series of PTO parts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
RP202, RP220
Length: 190
Width: 70
Curl ID: 30
Thickness: 5
Tine
0343.51.00.00
0940.52.25.00
0940522500
Length: 190
Width: 74
Curl ID: 30
Thickness: 5.5
HD Tine
0940.52.67.00
0940526700
Length: 346
Width: 220
Thickness: 5
Hole size: 12
Knife
0982.21.04.00
0982210400Z
ID: 11.9
OD: 35
Height: 15
Cam bearing
572113B
These models of Lely / Welger Balers use the WWE2480 series of PTO parts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
www.mchc.ie
66
Grass Harvesting
Lely
TYPE
RP235
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 190
Width: 70
Curl ID: 30
Thickness: 5
Tine
0343.51.00.00
0940.52.25.00
0940522500
Length: 190
Width: 74
Curl ID: 30
Thickness: 5.5
HD Tine
0940.52.67.00
0940526700
Length: 360
Width: 230
Thickness: 5
Hole size: 12
Knife
0982.21.09.00
0982210900
ID: 11.9
OD: 35
Height: 15
Cam bearing
572113B
16 x 650 x 8
16X650X8X6
These models of Lely / Welger Balers use the WWE2480 series of PTO parts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
RP245
(Camless pick up)
RP235, RP245
Length: 205
Width: 70
Curl ID: 30
Thickness: 5.5
Middle tine
0940527000
Outer tine
0940527100
ID: 60
OD: 110
Inner
wheel bearing
0942.40.59.00
32212
ID: 50
OD: 90
Outer
wheel bearing
0942.40.55.00
32210
OEM NUMBER
NON-GREASEABLE
PART NUMBER
GREASEABLE
PART NUMBER
0922129100
0922128700
0922128800
0922129500
0922401000
17262062RS
17262072RS
17262082RS
17262102RS
22210C3
G206NPPB
G207NPPB
G208NPPB
G210NPPB
-
www.mchc.ie
PITCH
x 17.02mm
67
ROLL LENGTH
5 metres
ISO NUMBER
16B-1
PART NUMBER
BS80
Grass Harvesting
TYPE
DIMENSIONS
LH Shown
Hole Size: 21
Length: 105
Width: 48
Thickness: 4
Disc Mower
Thread: M12
Length: 29
Width: 30
Collar: 20
DESCRIPTION
LH Twisted blade
(Box Qty 25)
OEM NUMBER
PART NUMBER
41966
RH Twisted blade
(Box Qty 25)
41967
Blade holder
(bolt only)
4715200
M12DIN985
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 21
Length: 108
Width: 47
Thickness: 3
Cranked blade
(Box Qty 25)
CM120108
LH Blade
(Box Qty 25)
129MEL
Hole Size: 21
Length: 129.5
Width: 47
Thickness: 4
RH Blade
(Box Qty 25)
129MER
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 21
Length: 100
Width: 45
Thickness: 4
Flat blade
(Box Qty 25)
878104M2
Hole Size: 21
Length: 105
Width: 47
Thickness: 3
Cranked blade
(Box Qty 25)
CM120Z
Hole Size: 23
Length: 98
Width: 46
Thickness: 4
Flat blade
(Box Qty 25)
1717782M1
Smooth section
(Box Qty 25)
D1140
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 200
Width: 82
Curl ID: 32
Thickness: 5
Pick up tine
585136M1
585136M1N
LH Shown
TYPE
Rotary Mower
www.mchc.ie
TYPE
68
Grass Harvesting
McHale
FUSION
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 191
Width: 71
Curl ID: 30
Thickness: 5.7
Pick up tine
CTN00008
Fixing Set
(Pack of 10)
KS00058
ID: 15
OD: 40
Height: 15.9
Cam bearing
LR52022RS
Knife
BN40020
A66
Length: 191
Width: 71
Curl ID: 30
Thickness: 5.7
Pick up tine
CTN00008
Fixing set
(Pack of 10)
KS00058
ID: 15
OD: 40
Height: 15.9
Cam bearing
LR52022RS
Knife
BN40020
F5000 Series
1" Duplex
1 1/4" Heavy
1 1/4" Standard
-
FUSION 2
Chain to suit
Chopper Drive
Chain to suit
Main Drive
Chain to suit
Roller Drive
BS80DLX
ASA100H
BS100
-
SPB1410
A44
A66
Tyre: 16 x 650 x 8
Hub ID: 25mm
Universal
baler wheel
BW5508
16 x 650 x 8
16X650X8X6
All Models
www.mchc.ie
69
Grass Harvesting
McHale
Fusion 2, Fusion 3
DESCRIPTION
WWE2480 complete wide angle PTO shaft
WWE2480 half wide angle PTO shaft
Inner half guard for WWE24801560K64/22R
Outer half guard for WWE24801560K64/22R
PWE580 Power drive complete PTO shaft
PWE580 half wide angle PTO shaft
PART NUMBER
WWE24801560K64/22R
WWE24801474HALF
SD251500INNERLT
SDF251500OUTERLT
PWE5801610K64/22
PWE5801520HALF
DESCRIPTION
WWE2480 Cross (32x27x76x94)
with 1 Cap grease nipple
OEM NUMBER
PART NUMBER
3506141
ID
50
65
F550
www.mchc.ie
70
OD
90
120
DEPTH
24.75
24.75
PART NUMBER
32210
30213
Grass Harvesting
New Holland
TYPE
DIMENSIONS
LH Shown
OEM NUMBER
PART NUMBER
56151200
RH Twisted blade
(Box Qty 25)
56151300
LH Blade
(Box Qty 25)
56151210
LH Shown
RH Blade
(Box Qty 25)
56151310
LH Blade
(Box Qty 25)
55903210
55903210
RH Shown
RH Blade
(Box Qty 25)
55903310
55903310
LH Twisted blade
(Box Qty 25)
56451200
LH Shown
RH Twisted blade
(Box Qty 25)
56451300
LH Twisted blade
(Box Qty 25)
58699
LH Shown
RH Twisted blade
(Box Qty 25)
58700
Stepped blade
(Box Qty 25)
534744
www.mchc.ie
70a
DESCRIPTION
LH Twisted blade
(Box Qty 25)
Grass Harvesting
New Holland
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Square Baler
HAYLINER 67 / 68 / 69 /
268 / 278
Length: 190
Width: 112
Curl ID: 29
Thickness: 5
Pick up tine
127566
Length: 189
Width: 70
Curl ID: 32
Thickness: 5
Pick up tine
80131673
131673
Needle
535624
Fixed finger
536220
Thread: M10
Length: 45.2
Width: 31.75
Bearing
535922
SRS304
Thread: 3/4"UNF
Length: 2 1/4"
Width: 2 1/2"
Bearing
444457
688282
444457
Thread: M20
Length: 2 1/4
Width: 2 1/2
Bearing
535664
450310
535664
Flywheel
65E / 68 / S68 / 78 / S78
/ S268 / 274 / 276 / 278
/ 286
5/16" x 2"
Knotter
370 / 376 / 377 / 378 /
386 / 387 / 940 / 945
6 x 40mm
Flywheel
376
10 x 60mm
Flywheel
370 / 386 / 387
(later type)
8 x 55mm
Shear bolt
5162UNC931
39716
516UNC985
Shear bolt
M640DIN931
536886
M6DIN985
Shear bolt
M1060DIN931
544502
M10DIN985
Shear bolt
M855DIN931
554935
M8DIN985
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
71
Grass Harvesting
Niemeyer
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
(Box Qty 25)
96
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
Super Radura
(Box Qty 25)
96SR
Blade holder
570.425
570425
These models of Niemeyer Grass Mowers use the W2400 series of PTO parts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
LH Twisted blade
Hole Size: 19
9041786
(Box Qty 25)
Length: 105
Width: 48
RH Twisted blade
9041776
Thickness: 3
(Box Qty 25)
LH Shown
SM 260 / 310 / 750 /
EURODISC
Thread: M12
Length: 28
Width: 30
Collar: 18
Blade holder
011.064
018.824
503.175
11064
These models of Niemeyer Grass Mowers use the W2400 series of PTO parts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
TYPE
DIMENSIONS
LH Shown
Length: 370
Width: 120
Curl ID: 38
Thickness: 9.5
LH Shown
Length: 380
Width: 127
Curl ID: 50
Thickness: 9.4
16 x 650 x 8
DESCRIPTION
LH Tine
(yellow)
OEM NUMBER
PART NUMBER
600011
RH Tine
(red)
600012
LH Tine
(yellow)
600061
RH Tine
(red)
600062
16X650X8X6
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 611
Width: 92
Curl ID: 38
Thickness: 9.5
Tine
600040
www.mchc.ie
TYPE
72
Grass Harvesting
Pottinger
TYPE
DIMENSIONS
LH Shown
OEM NUMBER
PART NUMBER
434.988
58699
RH Twisted blade
(Box Qty 25)
434.989
58700
Thread: M10
Length: 32
Width: 30
Collar: 18
Blade holder
81160K
Drive belt
SPA3000
(4 per mower)
Conditioner belt
B71
(4 per mower)
Hole Size: 21
Length: 112
Width: 49
Thickness: 4
LH Twisted blade
(Box Qty 25)
434.969
434.973
434969
RH Twisted blade
(Box Qty 25)
434.970
434.974
434970
Thread: M12
Length: 28
Width: 30
Collar: 18
Blade holder
011.064
018.824
503.175
11064
Drive belt
SPB3000
LH Twisted blade
(Box Qty 25)
434.975
434975
LH Shown
Hole Size: 21
Length: 120
Width: 47
Thickness: 4
RH Twisted blade
(Box Qty 25)
434.976
434976
LH Twisted blade
(Box Qty 25)
434.985
90261559
LH Shown
RH Twisted blade
(Box Qty 25)
434.986
90261560
Hole Size: 21
Length: 120
Width: 50
Thickness: 4
Cranked blade
(Box Qty 25)
434.122
434122
Hole Size: 21
Length: 105
Width: 47
Thickness: 3
Cranked blade
(Box Qty 25)
CM120Z
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
(Box Qty 25)
434.991
96
Hole Size: 19
Length: 96
Width: 40
Thickness: 3
Flat blade
Super Radura
(Box Qty 25)
96SR
LH Shown
www.mchc.ie
73
DESCRIPTION
LH Twisted blade
(Box Qty 25)
Grass Harvesting
Pottinger
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
LH Tine
436.150
436150
LH Shown
Length: 405
Width: 105
Curl ID: 53
Thickness: 10
RH Tine
436.149
436149
Fixing set
405560
Length: 380
Width: 105
Curl ID: 53
Thickness: 10
Tine
436.148
436148
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 585
Width: 85
Curl ID: 48
Thickness: 9
Tine
436.031
436031
Length: 545
Width: 98
Curl ID: 46
Thickness: 9
Wide tine
436032
Length: 550
Width: 83
Curl ID: 48
Thickness: 9
Narrow tine
436033
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 158
Width: 65
Curl ID: 25
Thickness: 5.5
Pick up tine
436.144
436144
TYPE
MEX 6
www.mchc.ie
TYPE
74
Grass Harvesting
Pottinger
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 158
Width: 65
Curl ID: 25
Thickness: 5.5
Pick up tine
436.144
436144
Length: 185
Width: 68
Thickness: 5.5
Pick up tine
436.151
436151
Length: 400
Width: 203
Thickness: 5
Hole size: 11
Knife
434.100
434100
Hole size: 50
Bolt holes: 20
Bolt hole
distance: 120
Swivel towing
hitch
8000348
Shaft: 1"
Splines: 6
Hydraulic motor
OMP1251510333
Length: 185
Width: 68
Thickness: 5.5
Pick up tine
436.151
436151
Length: 400
Width: 203
Thickness: 5
Hole size: 11
Knife
434.100
434100
Hole size: 50
Bolt holes: 20
Bolt hole
distance: 120
Swivel towing
hitch
8000348
Length: 185
Width: 68
Thickness: 5.5
Pick up tine
436.151
436151
Length: 430
Width: 215
Thickness: 5
434.126
434126
Length: 400
Width: 270
Thickness: 5
434.135
434135
Hole size: 50
Bolt holes: 20
Bolt hole
distance: 120
Swivel towing
hitch
8000348
1 3/8" - 21 spline
WWE2480
End yoke
358312
Euroboss 330
WWE2480
350600
Wide angle cross
These models of Pottinger Forage Wagons use the WWE2480 series of PTO shafts.
See the PTO section for a full parts listing to suit this series including crosses, tubing, yokes, etc.
32x27x76x94
www.mchc.ie
75
Grass Harvesting
TYPE
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Length: 161
Width: 62
Curl ID: 22
Thickness: 5
Pick up tine
87010630
Length: 305
Width: 230
Thickness: 5
Hole size: 10.5
Knife
504.36.501
504.36.507
50436501
Length: 1090
Width: 40
Hole distance:
110 / 60
Band
87005743
Length: 161
Width: 62
Curl ID: 22
Thickness: 5
Pick up tine
87010630
Knife
(Full set QTY 37)
41018501
Length: 1090
Width: 40
Hole distance:
110 / 60
Band
87005743
Length: 161
Width: 62
Curl ID: 22
Thickness: 5
Pick up tine
87010630
Length: 407
Width: 270
Thickness: 5
Hole size: 14
Knife
(main blade)
41517500
Length: 407
Width: 237
Thickness: 5
Hole size: 14
Knife
(end blade)
41517501
DIMENSIONS
DESCRIPTION
OEM NUMBER
PART NUMBER
Hole Size: 21
Length: 108
Width: 47
Thickness: 3
Flat blade
(Box Qty 25)
495806
Length: 475
Width: 355
Thickness: 5
Hole size: 14
Super Vitesse I / II
Zero Grazer
www.mchc.ie
TYPE
76
Grass Harvesting
Universal
TYRE SIZE
15 x 600 x 6
16 x 650 x 8
HUB ID
25mm
25mm
PART NUMBER
BW4506
BW5508
Tyre Profiles
T-510
T-513
T-522
T-539
T-991
ST-52
Tyres
All tyres are supplied complete with tube (with the exception of the tubeless ones)
Valve types:
TR87 = Tube with bent valve
TR13 = Tube with straight valve
TL = Tubeless tyre
MEASUREMENTS
300 x 4
350 x 6
350 x 8
400 x 4
400 x 6
400 x 8
400 x 8
400 x 8
500 x 8
13 x 500-6
13 x 650-6
15 x 600-6
16 x 650-8
18 x 7.50-8
20 x 10.00-8
PROFILE
T-513
T-513
T-513
T-513
T-510
T-513
T-510
T-991
T-522
ST-52
ST-52
T-510
T-510
Trelleborg T-539
Titan Multi Trac
VALVE
TR87
TR87
TR13
TR87
TR13
TR13
TR13
TR13
TR13
TR13
TR13
TR13
TR13
TL
TL
PLY
4
4
4
4
4
4
4
6
4
4
4
4
6
4
4
TUBE TO SUIT
300X4B
350X6B
400X8ST
400X4B
400X8ST
400X8ST
400X8ST
400X8ST
500X8ST
13X500X6ST
13X500X6ST
15X600ST
16X650X8
18X750X8T
20X800X10T
PART NUMBER
300X4X4
350X6X4
350X8X4
400X4X4
400X6X4
400X8X4
400X8X4T510
400X8X6
500X8X4
13X500X6X4
13X650X6X4
15X600X6X4
16X650X8X6
18X750X8T539
20X1000X8TMT
Tubes
VALVE
TO SUIT TYRE
PART NUMBER
13X500X6T539
TR13
13X500X6X4
13X500X6ST
13X650X6X4
15X600X6X4
15X600ST
TR13
TR13
16X650X8ST50
16X650X8
TR13
18X650X8ST50
18X650X8T
TR13
18X950X8ST50
18X850X8T
20X800X10TMT
20X800X10ST50
TR13
20X800X10T
20X1000X8ST50
20X1000X8TMT
TR87 = Tube with bent valve TR13 = Tube with straight
www.mchc.ie
VALVE
TR13
TR87
TR87
TR13
TR87
TR87
TR13
TR13
76a
TO SUIT TYRE
25X8.50-14
300X4X4
350X6X4
400X4X4
400X6X4
350X8X4
400X8X4
400X8X4T510
400X8X6
500X8X4
PART NUMBER
25X850X14
300X4B
350X6B
350X6ST
400X4B
400X8B
400X8ST
500X8ST
Contents
Loader Tines
78 - 80
to suit Redrock
89
80
80
Euro Brackets
81
81
82
to suit Redrock
88
83 - 90
Abbey
83
Anderson
83
Belmac
83
BVL
84
Condell Feedall
84
Conor
84
DTech
84
Faresin
85
Fleming
85
GH Engineering
85
Keenan
86
Kverneland
86
Mayer
87
Mixtec
87
Peecon
87
Redrock
88
Strautmann
89
Triolet-Mullos
89
Unifeed
90
90
Load Cells
91 - 117
to suit Keenan
86
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
www.mchc.ie
77
SCHMIEDETECHNIK Tines
SCHMIEDETECHNIK
If it doesnt have
the SHW stamp
it isnt SHW.
SHW Loader tines are the No.1 fitted tine by all Irish & European
manufacturers. A full range of SHW loader tines are available from
stock at McHugh Components.
Square
Profile
'H'
Profile
Round
Profile
SPANNER
SIZE
M20 x 1.5
M22 x 1.5
M20 x 1.5
M22 x 1.5
M24 x 1.5
M20 x 1.5
M24 x 1.5
M20 x 1.5
M20 x 1.5
M20 x 1.5
M20 x 1.5
M20 x 1.5
M20 x 1.5
M22 x 1.5
32
32
32
32
36
32
36
32
32
32
32
32
32
32
LENGTH
Inch
mm
26"
680
26"
680
32"
800
32"
800
32"
800
39"
1000
39"
1000
43"
1100
43"
1100
48"
1250
48"
1250
55"
1400
55"
1400
55"
1400
PROFILE
Square
H
Square
H
Square
Square
Square
Square
Square
Square
Square
Square
Square
Round / H
END
MAX NUT
TORQUE
BUSH
PART NUMBER
Point
Point
Point
Point
Point
Point
Point
Point
Spoon
Point
Spoon
Point
Spoon
Point
450 Nm
500 Nm
450 Nm
500 Nm
550 Nm
450 Nm
550 Nm
450 Nm
450 Nm
450 Nm
450 Nm
450 Nm
450 Nm
500 Nm
TB1
TB1
TB1
TB1
TB1
TB1
TB1
TB1
TB1
TB1
TB1
TB1
TB1
TB1
221193SHW
TB26
221151SHW
TB32
221189SHW
221155SHW
221155SHWM24
221152SHW
221156SHW
221153SHW
221157SHW
221154SHW
221158SHW
TBR55
END
MAX NUT
TORQUE
BUSH
PART NUMBER
Point
Point
Point
Point
Spoon
Point
Point
Spoon
700 Nm
700 Nm
700 Nm
700 Nm
700 Nm
700 Nm
700 Nm
700 Nm
SB1
SB1
SB1
SB1
SB1
SB1
SB1
SB1
241160SHW
TBS35
241161SHW
241166SHW
241165SHW
241162SHW
241163SHW
241167SHW
SPANNER
SIZE
M28 x 1.5
M28 x 1.5
M28 x 1.5
M28 x 1.5
M28 x 1.5
M28 x 1.5
M28 x 1.5
M28 x 1.5
41
41
41
41
41
41
41
41
www.mchc.ie
LENGTH
Inch
mm
32"
810
35"
890
39"
980
43"
1100
43"
1100
48"
1250
55"
1400
55"
1400
PROFILE
Square
Square
Square
Square
Square
Square
Square
Square
78
SCHMIEDETECHNIK Tines
SPANNER
SIZE
DIA.
LENGTH
Inch
mm
M28 x 1.5
41
50mm
32"
810
M28 x 1.5
41
50mm
35"
890
M28 x 1.5
41
44mm
39"
980
M28 x 1.5
41
50mm
41"
1050
M28 x 1.5
41
50mm
48"
1250
M28 x 1.5
41
50mm
59"
1500
* Note: 401050M28SHW is supplied unpainted
PROFILE
Round
Round
Round
Round
Round
Round
END
MAX NUT
TORQUE
BUSH
PART NUMBER
Point
Point
Point
Point
Point
Point
700 Nm
700 Nm
700 Nm
700 Nm
700 Nm
700 Nm
SB1
SB1
SB1
SB1
SB1
TBS32R
TBS35R
4010980SHWM28
401050M28SHW *
401250SHWM28
401500SHWM28
LENGTH
Inch
mm
56"
1425
59"
1500
41"
1050
47"
1200
61"
1550
45mm
45mm
50mm
50mm
50mm
PROFILE
Round
Round
Round
Round
Round
END
HOLE
SIZE
PART NUMBER
Point
Point
Point
Point
Flat nose point
14mm
14mm
14mm
14mm
14mm
401425SHW
401500SHW
401050SHW
401200SHW
401550SHW
SPANNER
SIZE
M20 x 1.5
M20 x 1.5
M20 x 1.5
M22 x 1.5
M24 x 1.5
32
32
32
32
36
www.mchc.ie
LENGTH
Inch
mm
32"
815
32"
815
36"
920
32"
815
32"
815
PROFILE
H
Square
Square
H
Square
79
END
MAX NUT
TORQUE
BUSH
PART NUMBER
Point
Point
Point
Point
Point
450 Nm
450 Nm
450 Nm
500 Nm
550 Nm
TB1
TB1
TB1
TB1
TB1
TBC32
221175SHW
221177SHW
TBC3222
221195SHW
SPANNER
SIZE
LENGTH
PROFILE
Inch
mm
M20
32
26"
680
Square
M22
32
26"
680
H
M20
32
32"
810
Square
M22
32
32"
800
H
M24
36
26"
680
Square
* Note: 4078R36680 has 2 nips on the bush cone
END
MAX NUT
TORQUE
BUSH
PART NUMBER
Point
Point
Point
Point
Point
450 Nm
500 Nm
450 Nm
500 Nm
450 Nm
TB1
TB1
TB1
TB1
TB1
221194SHW
2226
221192SHW
2232
4078R36680*
END
HOLE
SIZE
PART NUMBER
Point
Point
10.5
12.5
4016440SHW
400800SHW
25mm
36mm
LENGTH
Inch
mm
17"
440
32"
800
PROFILE
Round
Round
SPANNER
SIZE
32
32
36
41
DESCRIPTION
M20 Standard SHW Nut
M22 Standard SHW Nut
M24 Standard SHW Nut
M28 Standard SHW Nut
PART NUMBER
54169
TBN221
016047SHW
01013
THREAD
M20 x 1.5
M22 x 1.5
www.mchc.ie
SPANNER
SIZE
30
32
79a
DESCRIPTION
M20 Eccentric SHW Nut
M22 Eccentric SHW Nut
PART NUMBER
221202SHW
TBN222
LENGTH
mm
110
110
110
120
DESCRIPTION
PART NUMBER
TB1
TB002
SB1
SB002
80 x 60mm
190 - 200mm
LENGTH
(END TO END)
820mm
990mm
1200mm
1400mm
1600mm
1700mm
NO. OF
BUSHES
5
6
7
8
9
9
PART NUMBER
FT0825
FT0996
FT1207
FT1408
FT1609
FT1709
Silage Tape
Note: Sold in carton of 24, part number is for a single roll
WIDTH
Inch
3"
www.mchc.ie
LENGTH DESCRIPTION
Yards
20
Silage tape - black
80
PART NUMBER
SILT01
PART NUMBER
10373
PART NUMBER
10372
PART NUMBER
10370
PART NUMBER
10371
Front loader
Central locking mechanism
Euro standard
1110mm
DESCRIPTION
Euro type quick attach tool frame
www.mchc.ie
81
PART NUMBER
FT2060
200
STANDARD
PART NUMBER
8200
HARDOX
PART NUMBER
8200HX
STANDARD
PART NUMBER
8150L
8150R
HARDOX
PART NUMBER
8150LHX
8150RHX
Full section
150
150
LH section
RH section
Standard
Hardox
LENGTH
10
780
DESCRIPTION
Straight Shear Grab Blade
STANDARD
PART NUMBER
10780
HARDOX
PART NUMBER
10780HX
www.mchc.ie
82
Wearing Strips
Available to order in lengths
of 3000mm
525
M20
245
80
Tub Feeder
DESCRIPTION
Vertical knife to suit Abbey diet feeder
Bolt to suit
80
PART NUMBER
FM01134
M1660DIN7991
M1670DIN7991
226
194
89
20x12
97
Tub Feeder
DESCRIPTION
LH knife to suit Abbey diet feeder
RH knife to suit Abbey diet feeder
27x12
PART NUMBER
382597
382598
525
M20
245
80
Tub Feeder
DESCRIPTION
Vertical knife to suit Anderson diet feeder
Bolt to suit
80
PART NUMBER
FM01134
M1660DIN7991
M1670DIN7991
226
194
89
20x12
97
Tub Feeder
DESCRIPTION
LH knife to suit Anderson diet feeder
RH knife to suit Anderson diet feeder
27x12
PART NUMBER
382597
382598
525
M18
245
M12
80
To suit models:
Tub Feeder
DESCRIPTION
Knife to suit Belmac diet feeder
PART NUMBER
FM01999
80
205
www.mchc.ie
83
525
M18
245
M12
80
To suit models:
Tub Feeder
DESCRIPTION
Knife to suit BVL diet feeder
PART NUMBER
FM01999
80
205
525
M18
245
M12
80
To suit models:
Tub Feeder
DESCRIPTION
Knife to suit Condell Feedall diet feeder
PART NUMBER
FM01999
80
205
525
M18
245
M12
80
To suit models:
Tub Feeder
DESCRIPTION
Knife to suit Conor diet feeder
PART NUMBER
FM01999
80
205
525
M20
245
80
Tub Feeder
DESCRIPTION
Vertical knife to suit DTech diet feeder
Bolt to suit
80
PART NUMBER
FM01134
M1660DIN7991
M1670DIN7991
226
194
89
20x12
www.mchc.ie
97
27x12
Tub Feeder
DESCRIPTION
LH knife to suit DTech diet feeder
RH knife to suit DTech diet feeder
84
PART NUMBER
382597
382598
525
M20
245
80
DESCRIPTION
Vertical knife to suit Faresin diet feeder
Bolt to suit
80
PART NUMBER
FM01134
M1660DIN7991
M1670DIN7991
226
194
89
20x12
97
Tub Feeder
DESCRIPTION
LH knife to suit Faresin diet feeder
RH knife to suit Faresin diet feeder
27x12
PART NUMBER
382597
382598
525
M18
245
M12
80
To suit models:
Tub Feeder
DESCRIPTION
Knife to suit Fleming diet feeder
PART NUMBER
FM01999
80
205
525
M18
245
M12
80
To suit models:
Tub Feeder
DESCRIPTION
Knife to suit GH Engineering diet feeder
PART NUMBER
FM01999
80
205
www.mchc.ie
85
DESCRIPTION
Body blade to suit Keenan
Body blade to suit Keenan
Body blade to suit Keenan
Body blade to suit Keenan
Bolt to suit body blade (8.8 Strength)
Spring washer to suit body blade
Nut to suit body blade
THICKNESS
5mm
5mm
6mm
6mm
SIDE
LH
RH
LH
RH
PART NUMBER
90043L
90043R
90066L
90066R
M1030DIN60388
M10DIN127B
M10DIN934
25mm Pitch
290mm
THICKNESS
10mm
RB134QC
LENGTH
991mm
PART NUMBER
80025
RB150QC
OVERALL
LENGTH
395
445
DIAMETER
45 / 54
64
CABLE
LENGTH
8 metres
8 metres
PART NUMBER
RB134QC
RB150QC
10.8
96
PART NUMBER
1560635KD
M1025DIN60388
PART NUMBER
1560177KD
M1025DIN60388
M1030DIN60388
535
20
4
10
To suit models:
215
Tub Feeder
DESCRIPTION
Knife to suit Kverneland diet feeder
PART NUMBER
1050254
12
www.mchc.ie
86
535
20
4
10
To suit models:
215
Tub Feeder
DESCRIPTION
Knife to suit Mayer diet feeder
PART NUMBER
1050254
12
525
M18
245
M12
80
To suit models:
Tub Feeder
DESCRIPTION
Knife to suit Mixtec diet feeder
PART NUMBER
FM01999
80
205
525
M20
245
80
Tub Feeder
DESCRIPTION
Vertical knife to suit Peecon diet feeder
Bolt to suit
80
PART NUMBER
FM01134
M1660DIN7991
M1670DIN7991
226
194
89
20x12
www.mchc.ie
97
27x12
Tub Feeder
DESCRIPTION
LH knife to suit Peecon diet feeder
RH knife to suit Peecon diet feeder
87
PART NUMBER
382597
382598
Redrock
348
10
17
0
Tub Feeder
DESCRIPTION
Knife to suit Redrock diet feeder
PART NUMBER
31841
12
160
230
HOLE
SIZE
OEM
NUMBER
PART NUMBER
12.5
100.085
-
100085
M1220DIN7991
PART NUMBER
100086L
100086R
M1220DIN7991
PART NUMBER
100083L
100083R
M1220DIN7991
www.mchc.ie
88
PART NUMBER
109083L
109083R
M1220DIN7991
Round Profile
Square Profile
LENGTH
Inch
32"
35"
35"
M28 x 1.5
M28 x 1.5
M28 x 1.5
PROFILE
mm
810
890
890
Round
Square
Round
END
BUSH
PART NUMBER
Point
Point
Point
SB1
SB1
TBS32R
TBS35
TBS35R
455
18
80
245
80
11
PART NUMBER
60903500
M1650DIN7991
M16DIN985
220
81
Thickness:
To suit models:
3mm
Tomahawk
DESCRIPTION
Knife to suit Teagle bale chopper
51
PART NUMBER
90018
76
75
Thickness:
To suit models:
2.7mm
Tomahawk 404, 505, 606, 4040, 5050, 6060
DESCRIPTION
Knife to suit Teagle bale chopper
51
PART NUMBER
SC1100
75
348
10
17
0
DESCRIPTION
Knife to suit Triolet-Mullos diet feeder
PART NUMBER
31841
12
160
230
www.mchc.ie
89
525
M18
245
M12
80
To suit models:
Tub Feeder
DESCRIPTION
Knife to suit Unifeed diet feeder
PART NUMBER
FM01999
80
205
525
M20
245
80
Tub Feeder
DESCRIPTION
Vertical knife to suit Unifeed diet feeder
PART NUMBER
FM01134
M1660DIN7991
M1670DIN7991
Bolt to suit
80
226
194
89
20x12
97
27x12
Tub Feeder
DESCRIPTION
LH knife to suit Unifeed diet feeder
RH knife to suit Unifeed diet feeder
PART NUMBER
382597
382598
Note: Wider range of feed wagon / tub feeder knives available from our suppliers.
If you require knives for a machine not listed in this section please contact our office.
Tub Feeder
www.mchc.ie
TO SUIT
APPLICATION / DESCRIPTION
PART NUMBER
W400E1010351802SD25
WWE24801010SB
WWE24801210SB
90
Load Cells
PTM Srl.
PTM Srl is a market leader in weighing technologies and systems. They have been designing and producing
innovative systems for over thirty years and McHugh Components Ltd are proud to bring these products to the Irish
market.
The programme of Electronic Weight Indicators, Load Cells and Accessories on offer is extensive and boasts the
following features:
Higher quality, stronger load cells. All load cells are manufactured using tempered stainless and alloy steel to
allow greater strength and flexibility.
By using a unique manufacturing process which heats the components and adhesives before assembly, PTM load
cells have a stronger resistance, higher signal quality and longer working life than other products on the market.
(Many manufacturers glue electronic components into cells, which reduces the life of the cell.)
PTM systems have gold contacts as standard which facilitates a superior transmission of signal.
PTM systems use military metal connectors as standard.
Monitors have an additional third connecting port as standard which allows for the addition of a remote display
unit or portable printer as needed by the operator.
PTM have developed a high quality quick connect junction box which is the Market leader in regard to installation
and ease of use.
PTM test 100% of the products that they produce. They also carry out rigorous vibration tests on the range of
monitors they supply.
www.mchc.ie
91
Load Cells
The weighing indicators in this range have been specifically developed to allow
the automation of the loading and unloading operations making them both quicker
and easier than before.
The series ranges from the basic HL20 model to the complete HL50 model and
standard features include:
A unique double display system. A backlit LCD display to visualise information
from different functions and a high luminescence, high visibility 5 digit LED
display which visualises any weights.
Aluminium Casing.
Connectors with Gold contacts.
Additional port for optional devices.
Protection against power supply inversion or overcharge by means of an auto
reset fuse.
All of the models in the series control the function of Total weight, Partial weight and weight block with the HL30 and HL50
models also allowing the operator to programme recipes according to the number of animals, total weight or percentages.
It is possible to change the name of the recipe and components, to carry out percentage variations in the total amount to load, to
save the accumulations of the loaded quantities and recalculate the quantities of the components to load.
All models can be connected to different types of remote displays, remote controls, printers and other optional devices and
come supplied with a multi language system, warranty control and capacity to record and store data from any possible
overloads that may occur with the system.
www.mchc.ie
92
Load Cells
Equipped with a large bright 6 digit LED display and a comprehensive 16-function keypad, this weighing indicator controls the
partial and total weight of any components to be loaded or unloaded.
Main Features:
Partial weight and total weight
5 Languages
Zero settings and calibration set up from keyboard
DESCRIPTION
Weighing system with partial and total weight functions
PART NUMBER
HL10
Technical Specifications:
High sensitivity membrane keyboard
ABS Casing
Protection class: IP65 with plug-in connectors
Size L 180 x H 95 x W 60 mm
Weight: 530g
Display: 6 red LED digits 13 x 9 mm
Display visible in full sunlight
Memory: Eeprom, non-volatile
Available weight divisions: 1 - 2 - 5 - 10 Kg
Time / Calendar
Resolution: - 135000 dd
Operating conditions: -30 to +70C
Relative humidity: 95%
Optional Devices:
Metallic plate for covering
Protection steel fender
Serial output RS232
AV20/5
Big display
Alarm
www.mchc.ie
93
Load Cells
Equipped with a large bright 6 digit LED display and a comprehensive 16-function keypad, this weighing indicator controls the
partial and total weight of any components to be loaded or unloaded. It also allows the operator to set 15 different recipes from
20 different components and is fitted with an internal alarm that signals the end of the loading operation.
Main Features:
15 recipes and 20 components
Programmed functions of loading and unloading
Partial weight and total weight
Possibility to operate per "Total" or per "Number of Animals"
Accumulations
5 Languages
Alarm on board
DESCRIPTION
Weighing system for the management of 15 recipes and 20 components
PART NUMBER
HL15
Technical Specifications:
Power supply: 12V dc
Absorbing power: 5 VA max
Load cells in parallel connection: Max 10 (350 )
Load cell power supply: 5 Vcc
Margin of reading error: 1 Kg out of 10,000 Kg
Display data field: 99999 to -9999
Measuring range: 2 mV to 20 mV
Conversion speed per second: 10 / sec.
Protection against radio frequency interferences
Elimination of power supply interferences
Signalling of low tension
Direct control of working tension
Consumption: 500 mA
Optional Devices:
Metallic plate for covering
Protection steel fender
Serial output RS232
AV20/5
Big display
Alarm
Scale Features:
Total / Partial
Weight
Programming
Component
Loading
Programming
Unload
Number
Number of
Recipes
Number of
Component
Names
Component
Names
Programming
Recipes
Weight
Recalculation
Yes
20
15
15
40
Yes
Animal total
weight
No
www.mchc.ie
94
Load Cells
This weighing indicator unit is equipped with a unique double display system. The central display is a large, bright 5 digit LED
system for weight display. There is also an additional smaller 2-digit display. The second display is a back-lighted LCD system
that shows the information about different operations.
Used to control the partial and total weight of any components to be loaded or unloaded, the HL20 records and holds
information from the last 5 overloads that have occurred highlighting the maximum overload and the length of time it lasted.
There is also an additional port on the unit, which allows for a printer or remote portable device to be added.
Main Features:
Big numbers
Double display
Partial weight
Total weight
Possibility to print
Zeroing and calibration settleable from software
DESCRIPTION
Weight indicator control panel with LED display for up to 12 load cells
PART NUMBER
HL20
Technical Specifications:
Power supply: da 11 a 28V dc
Absorbing power: 6 VA max
Load cells in parallel connection: Max 12 (350 )
Load cell power supply: 5 Vcc
Margin of reading error: 1 Kg out of 10,000 Kg
Display data field: 99999 to -99999
Measuring range: 2 mV to 20 mV
Conversion speed per second: 10 / sec.
Serial outputs: 1 fixed, 2 optional
Protection against radio frequency interferences
Elimination of power supply interferences
Signalling of low tension
Consumption: 800 mA
Optional Devices:
Remote display AV20/5
Remote display AV40/5
RF Remote display AV50
Remote display AV80
Big display
Alarm
Printer
Remote control RF7
Scale Features:
Total / Partial
Weight
Programming
Component
Loading
Programming
Unload
Number
Number of
Recipes
Number of
Component
Names
Component
Names
Programming
Recipes
Weight
Recalculation
Yes
No
No
No
www.mchc.ie
95
Load Cells
This weighing indicator unit is equipped with a unique double display system. The central display is a large, bright 5 digit LED
system for weight display. There is also an additional smaller 2-digit display. The second display is a back-lighted LCD system
that shows the information about different operations.
Used to control the partial and total weight of any components to be loaded or unloaded, the HL25 records and holds
information from the last 5 overloads that have occurred. Dosing operations can be controlled either manually or by
preprogramming 1 upload and 1 discharge process via the automatic mode.
Main Features:
Big numbers
Double display
Managing of 1 load / Managing of 1 unload
Pre alarm at 85%
Alarm lasting time when load is complete
Weight blocking during handling
Data print options available
DESCRIPTION
Weighing system for the management of 1 upload or 1 unload
PART NUMBER
HL25
Technical Specifications:
Power supply: da 11 a 28V dc
Absorbing power: 6 VA max
Load cells in parallel connection: Max 12 (350 )
Load cell power supply: 5 Vcc
Margin of reading error: 1 Kg out of 10,000 Kg
Display data field: 99999 to -99999
Measuring range: 2 mV to 20 mV
Conversion speed per second: 10 / sec.
Serial outputs: 1 fixed, 2 optional
Protection against radio frequency interferences
Elimination of power supply interferences
Signalling of low tension
Consumption: 800 mA
Optional Devices:
Remote display AV20/5
Remote display AV40/5
RF Remote display AV50
Remote display AV80
Big display
Alarm
Printer
Remote control RF7
Scale Features:
Total / Partial
Weight
Programming
Component
Loading
Programming
Unload
Number
Number of
Recipes
Number of
Component
Names
Component
Names
Programming
Recipes
Weight
Recalculation
Yes
No
No
No
www.mchc.ie
96
Load Cells
This weighing indicator unit is equipped with a unique double display system. The central display is a large, bright 5 digit LED
system for weight display. There is also an additional smaller 2-digit display. The second display is a back-lighted LCD system
that shows the information about different operations.
Used to control the partial and total weight of any components to be loaded or unloaded, the HL30 records and holds
information from the last 5 overloads that have occurred. Dosing operations can be controlled either manually or by
preprogramming up to 15 recipes from 15 different components.
Main Features:
15 recipes / 15 components in loading and in unloading
Pre alarm at 85%
Alarm lasting time when load is complete
Administration of the name of the components and recipes
Final mixing time
Accumulations and block for movements
Data print option available
DESCRIPTION
Weighing system for the management of 15 recipes and 15 components
PART NUMBER
HL30
Technical Specifications:
Power supply: da 11 a 28V dc
Absorbing power: 6 VA max
Load cells in parallel connection: Max 12 (350 )
Load cell power supply: 5 Vcc
Margin of reading error: 1 Kg out of 10,000 Kg
Display data field: 99999 to -99999
Measuring range: 2 mV to 20 mV
Conversion speed per second: 10 / sec.
Serial outputs: 1 fixed, 2 optional
Protection against radio frequency interferences
Elimination of power supply interferences
Signalling of low tension
Consumption: 800 mA
Optional Devices:
Remote display AV20/5
Remote display AV40/5
RF Remote display AV50
Remote display AV80
Big display
Alarm
Printer
Remote control RF7
Scale Features:
Total / Partial
Weight
Programming
Component
Loading
Programming
Unload
Number
Number of
Recipes
Number of
Component
Names
Recipe
Names
Programming
Recipes
Weight
Recalculation
Yes
15
15
15
40
Yes
Animals, Totals,
Percentages
Yes
www.mchc.ie
97
Load Cells
This weighing indicator unit is equipped with a unique double display system. The central display is a large, bright 5 digit LED
system for weight display. There is also an additional smaller 2-digit display. The second display is a back-lighted LCD system
that shows the information about different operations.
Used to control the partial and total weight of any components to be loaded or unloaded, the HL50 records and holds
information from the last 5 overloads that have occurred. Dosing operations can be controlled either manually or by
preprogramming up to 50 recipes from 30 different components.
Main Features:
50 recipes / 30 components in loading and in unloading
Pre alarm at 85%
Alarm lasting time when load is complete
Administration of the name of the components and recipes
Final mixing time
Accumulations and block for movements
Data print option available
DESCRIPTION
Weighing system for the management of 50 recipes and 30 components
PART NUMBER
HL50
Technical Specifications:
Power supply: da 11 a 28V dc
Absorbing power: 6 VA max
Load cells in parallel connection: Max 12 (350 )
Load cell power supply: 5 Vcc
Margin of reading error: 1 Kg out of 10,000 Kg
Display data field: 99999 to -99999
Measuring range: 2 mV to 20 mV
Conversion speed per second: 10 / sec.
Serial outputs: 1 fixed, 2 optional
Protection against radio frequency interferences
Elimination of power supply interferences
Signalling of low tension
Consumption: 800 mA
Optional Devices:
Remote display AV20/5
Remote display AV40/5
RF Remote display AV50
Remote display AV80
Big display
Alarm
Printer
Remote control RF7
Scale Features:
Total / Partial
Weight
Programming
Component
Loading
Programming
Unload
Number
Number of
Recipes
Number of
Component
Names
Recipe
Names
Programming
Recipes
Weight
Recalculation
Yes
30
50
50
40
Yes
Animals, Totals,
Percentages
Yes
www.mchc.ie
98
Load Cells
Weighing control unit engineered for quicker and smoother automation of the Unifeed Mixer Feeder Wagons loading and
unloading operations. With its high-luminescence high-visibility graphic display, it enables setting of up to 80 recipes and 20
components and relevant recipe dosing per individual animal and per total number of animals, of single ingredient specification
options (e.g. hay, silo feed, maize, etc.), of recipe specification options (e.g. milk, fattening, dry feed, etc.), it is equipped with
multilingual graphic interface system, innovative warranty control system via the built-in hour meter, an intelligent mixer feeder
wagon overcharge monitoring and control system, data storage of time and number of overcharge event occurrences, accumulation control system, mixer time interval setting options, required data printing options. Possibility of importing/exporting recipes
and data to and from PC through USB Pen Drive to be processed via Data-Mix-Card program. Backup data storage on the scale
and possibility of data transfer to a PC, useful function if USB Pen Drive should be damaged. If required the Topcut function is
available and it allows the management of blades that could be installed to hash the material inside the mixer wagon.
Main Features:
80 recipes
20 components
Loading and unloading data backup management
Multilingual
Calculation of ration per animal
Working mode for individual animal or for groups
Accumulations
Data print options.
TopCut management possibility
Computer connection
Dedicated software packs (Data Mix Card 3.50)
DESCRIPTION
GRAPHIC A USB weighing system
PART NUMBER
HL80A
Technical Specifications:
Power supply: da 11 a 28V dc
Absorbing power: 5 VA max
Load cells in parallel connection: Max 12 (350 )
Load cell power supply: 5 Vcc
Margin of reading error: 1 Kg out of 10,000 Kg
Display data field: 99999 to -99999
Measuring range: 2 mV to 20 mV
Conversion speed per second: 10 / sec.
Serial outputs: 1 fixed, 2 optional
Protection against radio frequency interferences
Elimination of power supply interferences
Signalling of low tension
Consumption: 1000 mA
Optional Devices:
Remote display AV20/5
Remote display AV30/5
RF Remote display AV50
RF Remote display AV80
Remote display D.G.
Big Display
Printer
Remote control RF7
Alarm
Scale Features:
Total / Partial
Weight
Programming
Component
Loading
Programming
Unload
Number
Number of
Recipes
Number of
Component
Names
Upload
Groups
USB
Memory
PC
Connection
Yes
20
20
80
40
No
Yes
www.mchc.ie
99
Load Cells
DESCRIPTION
Data mix card 3.50 - software to work in conjunction with GRAPHIC A
PART NUMBER
DMC350
Data Mix Card software, together with Graphic Memory A and Graphic A USB scales, offers the following possibilities:
Simple programming of the recipes, with suitable name, up to 80 different recipes, with 20 components each.
Possibility to quickly modify the ration in comparison with the percentage of adjustment of each single component and recipe.
Graphic representation of the percentage related to the distribution of each component.
Data transfer to a PC through the memory card and a USB reader or pen drive.
Loading and unloading data back up while working, through USB pen drive.
Possibility of managing more scales simultaneously.
Setting a components list with the opportunity to input the cost per kilo.
Warehouse management and easy representation of available quantities.
Alarm working as per fixed minimum limit duly set.
Management of one customer archive for companies that work on behalf of third parties.
Multilingual system.
Possibility to transfer the data directly to Excel.
Compatible with all Windows systems.
Possibility to input the milk produced data and the relevant sales price per litre (or Kg) to calculate automatically proceeds and
the proceeds / costs ratio.
Comprehensive data archive function.
Archive Functions
Easy and quick representation of the performed operations in relation to:
(i) Recipe.
(ii) Time.
(iii) Customers.
(iv) Working trend.
(v) Cards.
Report generation:
(i) Complete print = detailed representation of affected operations.
(ii) Small print = representation of effective operations with main data.
(iii) Consumption report.
(iv) Print of costs = representation of labour costing per recipe.
www.mchc.ie
100
Load Cells
Weighing control unit developed for quicker and smoother automation of loading and unloading operations of Unifeed Mixer
Feeder Wagons. Supplied with high-luminescence high-visibility graphic display, it allows to set out up to 150 recipes, each with
30 ingredients in load and 50 unloads, as well as their relative dosing per single animal and per total number of animals. It is
possible to give a name to single ingredients (e.g. hay, silo feed, maize, etc.), to recipes (e.g. milk, fattening, dry feed, etc.), and
to unloading operations. The loading of ingredients with to-the-gram accuracy is also possible. Instant atmospheric temperature
display function provided. It features: an interactive graphic interface system in 15 languages - freely selectable via code entry
-, an innovative warranty control system via built-in hour counter, an intelligent system of monitoring and control of mixer feeder
wagon overcharge - with data storage of time and number of overcharge events -, accumulation control system, possibility of
setting the mixing time interval and printing required data. The TOPCUT function is available. The possibility of importing/exporting recipes and operational data via USB-PenDrive memory to and from PC for processing through Super-Data-Mix 5 software
is also provided, as well as the possibility to save backup data on the weighing computer and transfer them to PC (useful in
case the USB-Pendrive is damaged).
Main Features
150 recipes 30 ingredient in load 50 unloads per recipe
Programming per animals or totals
Possibility of programming components, recipes, groups and
wagons from PC
Possibility of modifying and creating recipes on the weighing
computer thanks to the data transferred from PC
Atmospheric temperature display
Data print possible Multi language Built-in hour counter
Control system of overcharges
Possibility of selecting the weight division
Possibility of calibrating the weighing computer in grams
Computer connection through USB-Pendrive
Data backup management
Dedicated software (Super Data Mix 5)
DESCRIPTION
GRAPHIC SUPER USB weighing system
PART NUMBER
HL150A
Technical Specifications:
Power supply: da 11 a 28V dc
Absorbing power: 5 VA max
Load cells in parallel connection: Max 12 (350 )
Load cell power supply: 5 Vcc
Margin of reading error: 1 Kg out of 10,000 Kg
Display data field: 99999 to -99999
Measuring range: 2 mV to 20 mV
Conversion speed per second: 10 / sec.
Serial outputs: 1 fixed, 2 optional
Protection against radio frequency interferences
Elimination of power supply interferences
Signalling of low tension
Consumption: 1000 mA
Optional Devices:
Remote display AV20/5
Remote display AV30/5
RF Remote display AV50
RF Remote display AV80
Remote display D.G.
Big Display
Printer
Remote control RF7
Temperature probe
CAN-Bus
ZigBee
Alarm
Scale Features:
Total / Partial
Weight
Programming
Component
Loading
Programming
Unload
Number
Number of
Recipes
Number of
Component
Names
Upload
Groups
USB
Memory
PC
Connection
Yes
30
50
150
99
99
Yes
Super Data
Mix 5.XX
www.mchc.ie
101
Load Cells
DESCRIPTION
Super data mix card 5XX - software to work in conjunction with GRAPHIC SUPER
PART NUMBER
DMC5XX
The Super Data Mix Software, used with the weighing computers Graphic Super Memory and Graphic Super USB, offers the
following possibilities:
Programming of up to 99 cards
Data transfer to the weighing computer through USB key or Memory Card
Use of more cards at the same time
Management of alarm percentages for loading and unloading operations
When working with USB key, it is possible to activate the function of data backup, in order to avoid losing information in case
the USB key is broken or damaged
Compatible with Windows XP, Windows Vista and Windows 7 32 and 64 bit
Data export to Excel or Text file
Simple programming of recipes with suitable name, up to 150 different recipes
Possibility to programme up to 30 components per recipe
Possibility to modify the quantity to be loaded by varying the quantity to load of each single component or of the whole recipe
according to a percentage
Graphic representation of the distribution percentage of each single component during recipe programming
Management of the percentage of dried substance for each component, with its nutritive value and cost (pro Kg)
Processing of recipe costs
Processing of the costs of each single operation;
Management of labour cost
Management of milk price
Calculation of recipe proceeds and benefits
Graphic representation of cost trend
Management of a customer database
Possibility to register the deliveries with quantity and arrival date of the material
Management of a common stock and of the single stocks of the different customers, each with its alarm quantity
Management of data regarding external atmospheric temperature
Management of a loading archive, with possibility of searching a specific operation and displaying the details of this operation
www.mchc.ie
102
Load Cells
Possibility to print reports for one or more operations in the loading archive; it is possible to print:
- Complete report
- Minimum report
- Consumption report
- Operation list
- Report on working time of each operation;
- List of the loaded recipe components;
- List of the loaded recipe components with corresponding values of dried substance
(All these reports can be exported to Excel or Text file.)
Management of an unloading archive, with possibility of searching a specific operation and registering the amount of
produced milk
Possibility to print reports for one or more operations in the unloading archive; it is possible to print:
- Complete report
- Minimum report
- Operation list
- Report on working time of each operation
- Report on milk production
(All these reports can be exported to Excel or Text file.)
Display of partial amounts to load for each wagon;
Possibility to send the database to the PTM technical department to find a solution to the problems;
Possibility to replace, compress and make a backup copy of the database;
Possibility to ask for a wireless device to transfer data from the PC to the weighing computer (through ZigBee technology).
www.mchc.ie
103
Load Cells
Main Features:
Repeater display featuring an RF signal
transmission system
AV50 is provided with a keyboard, which has the keys with
the same functions of the scales already mentioned
Fixing support for tractor available on request
AV50
This innovative and highly functional hand held device
facilitates the complete remote control of the HL
weighing system. It is connected via a radio frequency
transmitter and has a high quality dual display with a
large 6 digit LED and keyboard function with the exact
functions of the HL system allowing a simple and
practical crossover.
Technical Characteristics:
High sensibility membrane keyboard
Container in ABS
Protection:
IP 65
Dimensions:
Length: 110mm
Height: 210mm
Depth: 40mm
Weight:
450g
First Display:
Alphanumerical, backlit LCD
(2 lines, 16 characters per line)
Second Display:
6 alphanumerical, red LED digits
Memory:
Non volatile
Batteries:
2 lithium-ion rechargeable
Operating conditions:
-20 to + 60 C
Relative humidity:
95%
Power supply:
from 11 to 28 Vdc
Absorbed power:
5 VA consumption during charging
Transceiver:
A868 MHz in Fm
Internal RF Antenna
Signal of low battery tension
Range of use:
Up to 50 metres
4 Transmission channels available for the connection of
relevant devices simultaneously
DESCRIPTION
High function hand held remote to use in conjunction with HL20, 25, 30 & 50 weighing system
PART NUMBER
AV50
PART NUMBER
AV5080RFT
PART NUMBER
AV50BC1
PART NUMBER
AV50BC2
www.mchc.ie
104
PART NUMBER
FGKITBATAV01
Load Cells
Main Features:
Repeater display featuring an RF signal
transmission system
Equipped with some keys in order to join similar menus of
scales
Weight repeater display, to be also put on the arm with an
elastic strap
AV80
This innovative and highly functional portable device
facilitates the complete remote control of the main
functions of the HL weighing system. It is connected
via a radio frequency transmitter and has a high quality
display with a multi functional touch keypad which allows
complete integration with the HL weighing system.
Technical Characteristics:
High sensibility mechanical keyboard
Container in ABS
Protection:
IP 54
Dimensions:
Length: 150mm
Height: 100mm
Depth: 45mm
Weight:
330g
Display:
Alphanumerical, backlit LCD
(2 lines, 14 characters per line)
Memory:
Non volatile
Batteries:
1 lithium-ion rechargeable
Operating conditions:
-20 to + 60 C
Relative humidity:
95%
Power supply:
from 11 to 28 Vdc
Absorbed power:
4 VA consumption during charging
Transceiver:
A868 MHz in Fm
Internal RF Antenna
Signal of low battery tension
Range of use:
Up to 50 metres
4 Transmission channels available for the connection of
relevant devices simultaneously
DESCRIPTION
High function hand held remote to use in conjunction with HL20, 25, 30 & 50 weighing system
PART NUMBER
AV80
PART NUMBER
AV80VMB
PART NUMBER
AV5080RFT
PART NUMBER
AV80BC2
www.mchc.ie
105
PART NUMBER
AV80BC1
Load Cells
LENGTH
7.6 metre
PART NUMBER
SC762
PART NUMBER
JBL1
PART NUMBER
JB7IN
LENGTH
6 metres
PART NUMBER
JCSS6
LENGTH
7 metres
PART NUMBER
JCMW7
PART NUMBER
JB4IN-8
www.mchc.ie
106
PART NUMBER
JB6IN
Load Cells
The SB1 cells belong to the "shear" load cell series. They are therefore extremely rigid towards measured load and lateral or
transverse loads. Their compact, all stainless steel construction make them the ideal solution for industrial weighing applications
such as platforms, silos, tanks, dosing systems, etc.
Main Features:
Stainless steel composition
Combined errors: 0.03%
Non-sensitive to shear loads
Protection class IP67, IP68
Technical Specifications:
Accuracy class (to OIML IR60)
C3
Nominal full scale load (Ln):
250, 500, 1000, 2000Kg
Nominal sensitivity FSO:
3 mV/V
Tolerance on sensitivity at Ln:
<0.35%F.S.
Combined errors Non-linearity:
<0.03%F.S.
Hysteresis:
<0.03%F.S.
Repeatability:
<0.02%F.S.
Creep (after 30 min at Ln)
<0.02%F.S.
Zero balance:
<1.00%F.S.
Thermal drift in compensated range Zero calibration:
<0.02%F.S.
Sensitivity:
<0.02%F.S.
Normal input impedance:
3505
Normal output impedance:
3503
Isolation resistance:
>5000 M
Nominal power supply voltage:
10 Vdc
Maximum power supply voltage: 15 Vdc
Compensated temperature range: -10 to +40C
Maximum temperature range:
-20 to +50C
Storage temperature range:
-10 to +60C
Maximum load:
120% Ln
Breaking load:
150% Ln
Protection class (DIN 40050)
IP67, IP68
A
Fixing distance
M12
13.4 (3 holes)
H
G
max 18
A
29.8
31.75
31.75
31.75
B
31.75
31.75
31.75
31.75
C
15.75
15.75
15.75
15.75
D
25.4
25.4
25.4
25.4
E
76.2
76.2
76.2
76.2
F
12.65
12.65
12.65
12.65
G
130
130
130
130
H
9
9
9
9
FIXING DISTANCE
57
57
57
57
PART NUMBER
SB1-K2C5
SB1-K5C
SB1-K1M
SB1-K2M
www.mchc.ie
107
Load Cells
The SB1 cells belong to the "shear" load cell series. They are therefore extremely rigid towards measured load and lateral or
transverse loads. Their compact, all stainless steel construction make them the ideal solution for industrial weighing applications
such as platforms, silos, tanks, dosing systems, etc.
Main Features:
Stainless steel composition
Combined errors: 0.03%
Non-sensitive to shear loads
Protection class IP67, IP68
Technical Specifications:
Accuracy class (to OIML IR60)
C3
Nominal full scale load (Ln):
3000, 5000, 7500
Nominal sensitivity FSO:
3 mV/V
Tolerance on sensitivity at Ln:
<0.35%F.S.
Combined errors Non-linearity:
<0.03%F.S.
Hysteresis:
<0.03%F.S.
Repeatability:
<0.02%F.S.
Creep (after 30 min at Ln)
<0.02%F.S.
Zero balance:
<1.00%F.S.
Thermal drift in compensated range Zero calibration:
<0.02%F.S.
Sensitivity:
<0.02%F.S.
Normal input impedance:
3505
Normal output impedance:
3503
Isolation resistance:
>5000 M
Nominal power supply voltage:
10 Vdc
Maximum power supply voltage: 15 Vdc
Compensated temperature range: -10 to +40C
Maximum temperature range:
-20 to +50C
Storage temperature range:
-10 to +60C
Maximum load:
120% Ln
Breaking load:
150% Ln
Protection class (DIN 40050)
IP67, IP68
A
Fixing distance
J
20.5 (2 holes)
H
max 18
LOAD CAPACITY
3000 Kg
5000 Kg
7500 Kg
A
40.6
40.6
40.6
B
38
38
38
D
38.1
38.1
38.1
E
95.3
95.3
95.3
F
19
19
19
G
171.5
171.5
171.5
H
12
12
12
J
13
13
15
FIXING DISTANCE
80
80
80
PART NUMBER
SB1-K3M
SB1-K5M
SB1-K7M5
www.mchc.ie
108
Load Cells
The SB1 cells belong to the "shear" load cell series. They are therefore extremely rigid towards measured load and lateral or
transverse loads. Their compact, all stainless steel construction make them the ideal solution for industrial weighing applications
such as platforms, silos, tanks, dosing systems, etc.
Main Features:
Stainless steel composition
Combined errors: 0.03%
Non-sensitive to lateral loads
Protection class IP67, IP68
Technical Specifications:
Accuracy class (to OIML IR60)
C3
Nominal full scale load (Ln):
10000Kg
Nominal sensitivity FSO:
2 mV/V
Tolerance on sensitivity at Ln:
<0.35%F.S.
Combined errors Non-linearity:
<0.02%F.S.
Hysteresis:
<0.02%F.S.
Repeatability:
<0.01%F.S.
Creep (after 30 min at Ln)
<0.02%F.S.
Zero balance:
<1.00%F.S.
Thermal drift in compensated range Zero calibration:
<0.02%F.S.
Sensitivity:
<0.02%F.S.
Normal input impedance:
3505
Normal output impedance:
3503
Isolation resistance:
>5000 M
Nominal power supply voltage:
10 Vdc
Maximum power supply voltage: 20 Vdc
Compensated temperature range: -10 to +50C
Maximum temperature range:
-20 to +60C
Storage temperature range:
-10 to +60C
Maximum load:
100% Ln
Breaking load:
200% Ln
Protection class (DIN 40050)
IP67, IP68
1x45
1x45
G
20.5
15
A
Fixing distance
J
R 20
16
20
max 18
LOAD CAPACITY
10000 Kg
A
42
B
38
C
19.1
D
38.1
E
95.3
F
G
18.8 171.3
H
40
J
41
FIXING DISTANCE
80
PART NUMBER
SB1-K10M
www.mchc.ie
109
Load Cells
Electrical Connection
The screen is isolated from the cell body. Screen connection
to device grounding is recommended.
Red
= Excitation+
Green
= Signal+
Black
= Excitation-
White
= Signal-
Shield
= Screen
70
54
44.5
10
87
LOAD CAPACITY
PART NUMBER
3400 Kg
RB134QC
Supplied with 5 pin quick connection
125
10
242
145
397
18.5
54
70
70
105
253.5
25
LOAD CAPACITY
4500 Kg
PART NUMBER
RB145
LOAD CAPACITY
5000 Kg
PART NUMBER
RB150
25
303.5
70
54
18.5
122.5
www.mchc.ie
105
350
122.5
110
Load Cells
The CM Series of load cells have been engineered for compression measuring in limited spaces. Use of parallel connected
multiple cell arrangements make them very suitable for a number of industrial weighing applications. A special sealing feature
makes them particularly suitable for humid and dusty environments.
Main Features:
Stainless steel composition
Combined errors: 0.03%
Reduced dimensions
Corrosion-resistant
Technical Specifications:
Nominal full scale load (Ln):
Rated output:
Output tolerance:
Nominal sensitivity FSO:
Tolerance on sensitivity at Ln:
Combined errors Non-linearity:
Hysteresis:
Repeatability:
Creep (after 30 min at Ln)
Creep at normal load after 4 hrs.
Zero balance:
Thermal zero drift:
Thermal drift on F.S.:
Input impedance:
Output impedance:
Isolation resistance:
Maximum power supply voltage:
Temperature effect on zero:
Temperature effect on FSO span:
Operating temperature range:
Temperature compensation:
Maximum static load:
Breaking load:
Deflection at nominal load:
Protection class (DIN 40050)
C
E
F
A
82
82
82
82
82
82
B
44
44
44
44
44
44
C
32
32
32
32
32
32
D
22
22
22
22
22
22
E
14
14
14
14
14
14
F
12
12
12
12
12
12
PART NUMBER
CM-K5C
CM1-K1M
CM1-K2M5C
CM1-K5M
CM1-K7M5C
CM1-K10M
www.mchc.ie
111
Load Cells
The CM Series of load cells have been engineered for compression measuring in limited spaces. Use of parallel connected
multiple cell arrangements make them very suitable for a number of industrial weighing applications. A special sealing feature
makes them particularly suitable for humid and dusty environments.
Main Features:
Stainless steel composition
Combined errors: 0.03%
Reduced dimensions
Corrosion-resistant
Technical Specifications:
Nominal full scale load (Ln):
Rated output:
Output tolerance:
Zero tolerance:
Nominal sensitivity FSO:
Combined errors Non-linearity:
Hysteresis:
Repeatability:
Creep (after 30 min at Ln)
Creep at normal load after 4 hrs.
Zero balance:
Thermal zero drift:
Thermal drift on F.S.:
Input impedance:
Output impedance:
Isolation resistance:
Maximum power supply voltage:
Temperature effect on zero:
Temperature effect on FSO span:
Operating temperature range:
Temperature compensation:
Maximum static load:
Breaking load:
Deflection at nominal load:
Protection class (DIN 40050)
C
E int.
A
A
100
100
126
126
126
165
B
48
48
54
54
54
80
C
35
35
40
40
40
60
D
28
28
35
35
35
60
E
-
F
20
20
20
20
20
20
PART NUMBER
CM1-K15M
CM1-K20M
CM1-K25M
CM1-K30M
CM1-K35M
CM1-K50M
www.mchc.ie
112
Load Cells
The SB2 cells belong to the shear load cell series. They are therefore extremely rigid towards measured load and lateral or
transverse loads. Their compact, all stainless steel construction make them the ideal solution for industrial weighing applications
such as platforms, silos, tanks, dosing systems, etc.
Main Features:
Stainless steel composition
Combined errors: 0.035%
Non-sensitive to shear loads
Protection class IP67 - IP68
= Out+
White
= In+
Yellow
= Out-
Green
= In-
Shield
= Screen
62
94.5
20.5
39
45
23
Red
Technical Specifications:
Accuracy:
0.04%
Nominal full scale load (Ln):
6000 Kg
Nominal sensitivity FSO:
2 mV/V
Tolerance on sensitivity at Ln:
<0.2%FSO
Combined errors Non-linearity:
<0.04%FSO
Hysteresis:
<0.04%FSO
Repeatability:
<0.04%FSO
Creep (after 30 min at Ln)
<0.05%F.S.
Zero balance:
<0.50%F.S.
Thermal drift in compensated range Zero calibration:
<0.10%FSO/10K
Sensitivity:
<0.05%FSO/10K
Normal input impedance:
3505
Normal output impedance:
3503
Isolation resistance:
>10 GOhm
Nominal power supply voltage:
10 Vdc
Maximum power supply voltage: 15 Vdc
Compensated temperature range: -10 to +40C
Maximum temperature range:
-20 to +50C
Storage temperature range:
-10 to +60C
Maximum application load:
150% Ln
Breaking load:
300% Ln
Maximum static side load:
100% Ln
Maximum dynamic load (DIN 50100): 70% Ln
Maximum deformation at Ln:
<0.5mm
Protection class (DIN 40050)
IP66
110
21
57.5
24
18
24
90
18 max
200
LOAD CAPACITY
6000 Kg
6000 Kg
DESCRIPTION
SB2 Stainless steel shear load cell - without connection
SB2 Stainless steel shear load cell - with connection
PART NUMBER
SB2K6M-1
SB2K6M-2
www.mchc.ie
113
Load Cells
The SB8 load cells have a double shear beam structure made of high quality alloy steel. Low profile, simple to install, easy to
use. Working for both dynamic and static loading. Different connecting method according to different using environment. Widely
used for forestry, agriculture, garbage transport and axle load weighing, etc.
Main Features:
Alloy steel
Combined errors: 0.05%
Protection class IP67
45
28
M20 x 4
38
78
38
10
21.5 x 4
60
117
R6
34
28
10
76
162
292
330
LOAD CAPACITY
10000 Kg
Technical Specifications:
Rated output:
Nominal full scale load (Ln):
Combined errors Non-linearity:
Hysteresis:
Repeatability:
Creep (after 30 min at Ln)
Zero balance:
Temperature effect On zero:
On output:
Normal input impedance:
Normal output impedance:
Isolation resistance:
Nominal power supply voltage:
Maximum power supply voltage:
Compensated temperature range:
Maximum temperature range:
Safe overload:
Protection class:
DESCRIPTION
SB8 Stainless steel shear load cell
<0.5mV/V
10000 Kg
<0.05%FSO
<0.05%FSO
<0.01%FSO
<0.02%F.S.
<1.00%F.S.
<0.02%FS/10
<0.02%FS/10
38510
3505
>5000 MOhms
10V (dc/ac)
20V (dc/ac)
-10 to +50C
-20 to +60C
120% FS
IP67
PART NUMBER
SB8K10M-1
www.mchc.ie
114
Load Cells
Optional
-12V dc
A
E
+12V dc
C
5 Pins
connector
back-side
Optional
-12V dc
A
E
+12V dc
C
5 Pins
connector
back-side
www.mchc.ie
115
Load Cells
Device Functions:
Working either via cable or radio frequency
Complete programming of the keys available
Up to 28 available outputs for each remote control
Up to 3 actionable outputs from each key
4 different types of function available on the keys
Choice among 4 different types of outputs
Programming customized functions possible
Management of up to 10A for each single output
Management of up to 30A for more outputs activated at the
same time
Unlimited function combinations available
Extreme versatility for several applications (straw cutter, mixer
wagon, tun wagon, cranes, platforms, etc..)
6 available inputs from proximity sensors, external buttons or
micro switches to block / release the user
Display supplied with radio frequency signal communication
Working reach up to 50m via radio frequency (in free field)
Integrated antenna, or external antenna mounted outside the
box on board, according to the users requirements
Terminal to control and visualize the functions
Possibility to control 2 hydraulic flow adjustment motors
Equipped with fixing support
Emergency key and button to immediately stop the operations
and switch the device off
Valve protection against short circuits
Complete protection fuses
Resistant to strong mechanical stress
DESCRIPTION
Wireless / wired remote control for use with control boxes
PART NUMBER
TELERF
The TELERF remote terminal has been developed to satisfy the requirements of remote control and automation via wireless or
cable transmission. It is possible to control any system: electric, electro hydraulic, etc. and this device allows to directly control
the operations carried out by the machine (e.g. straw-cutting machines, mixer wagons, tun wagons, cranes, platforms, etc,) and
directly manage the contacts (electro valves or relays) associated to a specific operation; it is also possible to activate more than
one function at the same time.
In addition to that, for greater clarity of the operations in progress, all the active controls are visualized on the alphanumeric LCD
display. This remote control operates by means of a Power board installed on board of the machine, where the connections to
the devices to control are made (such as electro valves, micro inputs, etc.)
Thanks to the integrated software, it is possible to adapt and set out the system according to ones requirements, just by setting
out the wished parameters of the remote control. This device is prepared to manage up to 28 electro valves, 4 of which of
proportional type, and 4 relays; that allows to use both on/off devices and adjustable devices. In addition to that, 6 outputs can
be activated both through the remote control and by means of 6 external inputs, such as proximity sensors, micro switches or
buttons. Two further analogical inputs 0-5V or 0-10V are also available.
As far as the safety of operator and machine is concerned, it is possible to carry out the following operations: set out a time lag
before starting the driving control of a user, interblock two opposing controls, signal the activation of an output through led (in
order to increase the visual check of the operator), and immediately stop all operations thanks to an emergency button, without
switching the device off. In order to make the system even safer, two emergency buttons are available: one is placed on the
remote control, while the second one is mounted on the box on board of the machine, which is connected to the valves; by
pressing one of these two keys, any operation in progress is immediately stopped.
Some models allow to manage the TopCut function both automatically and manually. Thanks to the unlimited number of
combinations and configurations available, the device is perfectly suitable for various applications. The wireless version of this
remote control has four different channels which allows up to four separate systems to be used without the possibility of any
interference, and is characterized by a reach of more than 50 mt; on the other hand, the cable version gives a higher level of
safety for the operator, in case potentially dangerous moving mechanical parts are present.
All valve outputs are protected against short circuits and electrical problems; a protection fuse is also available against power
supply inversions and overcharge. The device can work without problems, even when it undergoes strong vibrations and
mechanical stress; in addition to that, the boxes are shockproof. In conclusion, assembling and disassembling the board on the
machine for service or maintenance operations is easy and quick, because all the connections to the valves are made by means
of removable terminal boxes.
www.mchc.ie
116
Load Cells
Mechanical keyboard
ABS Housing
Protection: IP65
Size: L110 xH210 xW40
(+6 mm in depth for the fixing support)
Weight of the remote control: 330 g
Display: Backlit LCD (2 lines, 16 characters per line)
Display visible in full sunlight
Memory: Eeprom Non-volatile
Batteries: 2 rechargeable Lithium batteries (RF version)
Battery autonomy: 10h
Battery charge time: 5h
Operating condition: -20C to +60C
Relative Humidity: 95 %
Power supply: From 11 to 28 Vdc
Absorbed power: 5 VA during the charge of battery
Transreceiver: A868 MHz in FM
Protection against radiofrequency interferences
Elimination of power supply interferences and
signalling of law tension
In the cable version, the Power board directly
provides the system with the power supply
Consumption: 250 mA (with electrovalves not active)
Plastic casing
Protection: IP55
Size: L254 xH180 xW111
(+ 6mm in depth for the fixing support)
Weight: 3,000 g MAX
Memory: Eeprom Non-volatile
Operating condition: -20C to + 50C
Relative Humidity: 95 %
Power supply: From 11 to 28 Vdc
Absorbed power: 5 VA during the charge of battery
Transreceiver: A868 MHz in FM
Protection against radiofrequencv interferences
Elimination of power supply interferences and
signalling of low tension
Plug to connect the device to the machine battery
Consumption: 250 mA (with electrovalves not active)
Max 25 A (with active electrovalves)
PART NUMBER
AV50BC1
PART NUMBER
AV50BC2
PART NUMBER
TELERF1
www.mchc.ie
117
PART NUMBER
TELERFP1
Electronic Counter
Technical Specifications:
Display:
Power supply:
Temperature limits:
Area counter:
Unit counter:
Clock:
4 digits
2 x 1.5V (AA Batteries)
The Flex Counter is fully operational within
-10C to 70C. This does not necessarily apply
for all type of batteries please check with your
local battery dealer.
Max. 167 pulse signals per second. Min. pulsetime: 0.6 ms - the magnet must activate the
sensor for 1/10 of the time at 9999 rpm.
Max. 0.100 Ha. per second = 360 Ha. per hour
Max: 0.167 additions per second = 10,000
pcs./10 m3 per minute, and 600,000 pcs./600
m3 per hour
+/- 0.5%. Has influence on the accuracy of the
following functions: speed (km/h), rpm and
working hours.
DESCRIPTION
Electronic counter system including control box, cable, sensor fittings and batteries
PART NUMBER
FLX001
Accessories
DESCRIPTION
Extra cable kit to suit FLX001
www.mchc.ie
118
PART NUMBER
FLX001C
Contents
Belmac
120
Bomford
120
Bridgeway
121
Conor
122
Einbock
122
McConnel
123 - 124
Nugent
124
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
www.mchc.ie
119
Abbey
Thickness = 8mm
80mm
26mm
280mm
DESCRIPTION
RH Topper blade to suit Abbey
LH Topper blade to suit Abbey
BUSH TO SUIT
UTB002
UTB002
PART NUMBER
T0014A
T0014B
HEIGHT
14.3
ID
16.05
OD
25 / 38
PART NUMBER
UTB002
OD
50
PART NUMBER
M16DIN9021A
www.mchc.ie
119a
HEIGHT
3
ID
17
Belmac / Bomford
Thickness = 7mm
75mm
26mm
320mm
BUSH TO SUIT
UTB002
PART NUMBER
T0001B
HEIGHT
14.3
ID
16.05
OD
25 / 38
PART NUMBER
UTB002
PART NUMBER
HFK002
LENGTH
84
WIDTH
40 / 68
PART NUMBER
CK2900
WIDTH
28
PART NUMBER
0589501N
OD
25.3
PART NUMBER
0280701
OD
15 / 19
PART NUMBER
0280101
LENGTH
60
LENGTH
26.6
ID
16.7
LENGTH
26
ID
10.5
www.mchc.ie
120
LENGTH
86
WIDTH
-
PART NUMBER
0367525
Bridgeway
Thickness = 7mm
75mm
26mm
320mm
DESCRIPTION
RH Topper blade to suit Bridgeway
LH Topper blade to suit Bridgeway
BUSH TO SUIT
UTB002
UTB002
PART NUMBER
T0001A
T0001B
HEIGHT
14.3
ID
16.05
OD
25 / 38
PART NUMBER
UTB002
DESCRIPTION
Aerator blade to suit Bridgeway
www.mchc.ie
121
LENGTH
200
PART NUMBER
08014
Conor / Einbock
Thickness = 7mm
75mm
26mm
320mm
DESCRIPTION
RH Topper blade to suit Conor
LH Topper blade to suit Conor
BUSH TO SUIT
UTB002
UTB002
PART NUMBER
T0001A
T0001B
HEIGHT
14.3
ID
16.05
OD
25 / 38
PART NUMBER
UTB002
Thickness = 7mm
75mm
30mm
320mm
DESCRIPTION
RH Topper blade to suit Conor
LH Topper blade to suit Conor
BUSH TO SUIT
-
PART NUMBER
T0008A
T0008B
HEIGHT
24
32
ID
20.25
20.25
OD
29.95
29.95
PART NUMBER
UTB001
CTB001
6 metres
Length:
Width:
Curl ID:
510
38
40
DESCRIPTION
7mm Spring tine to suit Einbock grass harrow
8mm Spring tine to suit Einbock grass harrow
PART NUMBER
999001
999001EV
www.mchc.ie
122
PART NUMBER
999003
Major
Thickness = 8mm
75mm
30mm
270mm
DESCRIPTION
RH Topper blade to suit Major
LH Topper blade to suit Major
BUSH TO SUIT
-
PART NUMBER
T0005A
T0005B
www.mchc.ie
122a
HEIGHT
24
32
ID
20.25
20.25
OD
29.95
29.95
PART NUMBER
UTB001
CTB001
McConnel
PART NUMBER
HFK001
DESCRIPTION
LENGTH
BORE
mm
mm
150
26
Cast
Heavy duty flail
Forged Long Life Heavy duty flail
150
26
Note: 1 metre machine has 20 flails, 1.2 metre has 24 flails
PART NUMBER
1840093
031840093
O.D.
mm
25
Flail bush
LENGTH
mm
39
BORE
mm
16.5
PART NUMBER
184106
PART NUMBER
77513747
M1615DIN985
PART NUMBER
HF6177
www.mchc.ie
123
PART NUMBER
63112RSC3
McConnel / Nugent
DESCRIPTION
Cast
LENGTH
mm
120
BORE
mm
20.5
PART NUMBER
7114312N
O.D.
mm
20
LENGTH
mm
44
BORE
mm
12.5
PART NUMBER
7114108N
PART NUMBER
7114082N
To suit models:
Rhino
Length:
Width:
Hole size:
Thickness:
515
100
38
12
DESCRIPTION
LH Topper blade to suit McConnel
RH Topper blade to suit McConnel
BUSH TO SUIT
-
PART NUMBER
CK6160L
CK6160R
BUSH TO SUIT
-
PART NUMBER
T0009A
Thickness = 7mm
75mm
32mm
320mm
www.mchc.ie
124
Contents
126
Attachment Kits
127
Washdown Kit
128
Fittings
129 - 149
Perrot
129 - 133
Italian
134 - 138
Bauer
139 - 142
General Fittings
143 - 149
Hose
150 - 152
Hose Clips
153
Valves
154 - 157
Tanker Parts
158 - 162
Tank Parts
162
Vacuum Pumps
163 - 177
163 - 164
165 - 166
Oil Pumps
167
SE Series Spares
168
169
GARDA Series
170 - 174
Battioni Range
175
176
Pump Vanes
176
177
177
Rain Guns
178 - 179
180 - 181
182
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
www.mchc.ie
125
PERROT
(pages 129 - 133)
ITALIAN
(pages 134 - 138)
BAUER
(pages 139 - 142)
6104089
OM10
BA3096Z
6106000
OM13
BA3116Z
6103000
OM28
BA3136Z
6203000
OM29
BA3146Z
6204000
OM9
BA3106Z
6206000
OM14
BA3126Z
6650000
OM22
BA3056
6" Male
with
6" Hose End
6" Male
with
6" Thread
6" Male
with
4 Bolt Flange
6" Female
with
4 Bolt Flange
6" Female
with
Hose End
6" Female
Threaded
www.mchc.ie
126
Attachment Kits
6000315
15ft Hose
6000320
20ft Hose
6205550
6" QR Female
6205630
6" QR Female
6104089
6" QR Male
162174
6" Clip
6000072
6" Valve
PART NUMBER
HK8000Z
HK8000Z20
HK8500Z
HK8500Z20
HK9000Z
HK9000Z20
HK9500Z
HK9500Z20
6000315N
15ft Hose
6000320N
20ft Hose
6104089
6 QR Male
www.mchc.ie
OM607
6 QR Female
127
162174
6 Clip
PART NUMBER
HK7000
HK7001
HK7500
HK7501
6000072
6" Valve
6890000
6205630
6205550
Handle Kit 6" QR Female 6" QR Female
Nuts &
Bolts
PART NUMBER
6000072KIT1
6000072KIT2
Washdown Kit
Ideal for washing down tankers
2020000
2" Layflat
10 Metres
OM40
60mm
Female
OM39
2" Jetting
Nozzle
5255
PART NUMBER
HK5000
Lances
Hoses
Couplings
High Foam Detergent
www.mchc.ie
128
OM28
6" Male
6" Female
90 Hose Tail
4" hose tail
5" hose tail
6" hose tail
OM316Z
6" Cap
Hose
Clip
4"
5"
6"
PART
NUMBER
STK041
STK051
STK061
Nuts &
Bolts
PART
NUMBER
STK042
STK052
STK062
6000072
6" Valve
www.mchc.ie
6890000
Handle Kit
128a
90 Flanged
Hose Tail
4" hose tail
5" hose tail
6" hose tail
Hose
Clip
4"
5"
6"
Perrot Fittings
KKV Male Weld-On Coupling
COUPLING
SIZE
4"
5"
6"
8"
PART NUMBER
4100000
5100000
6100000
8100000
PART NUMBER
4109900
5109900
6109900
8109900
FLANGE
SIZE
6"
6"
8"
8"
LENGTH
PART NUMBER
150mm
150mm
150mm
220mm
5103000
6103000
6100830
8103000
www.mchc.ie
TO SUIT
HOSE SIZE
3"
4"
3"
5"
2"
6"
2"
3"
4"
5"
8"
129
HOSE END
LENGTH
195mm
210mm
210mm
250mm
PART NUMBER
3104000
4104000
4104003
5104000
5104002
6104000
6104002
6104003
6104004
6104005
8104000
Perrot Fittings
TO SUIT
HOSE SIZE
6"
PART NUMBER
6104089
THREAD
SIZE
6"
8"
PART NUMBER
6106000
8106000
RADIUS
PART NUMBER
215mm
260mm
305mm
400mm
4103090
5103090
6103090
8103090
TO SUIT
HOSE SIZE
4"
5"
4"
6"
8"
PART NUMBER
4104090
5104090
6104094
6104090
8104090
TO SUIT
HOSE SIZE
5"
PART NUMBER
6104455
www.mchc.ie
FEMALE SIZE
5"
6"
130
PART NUMBER
5102090
6102090
Perrot Fittings
PART NUMBER
6250000
6250001
8250000
PART NUMBER
6150000
PART NUMBER
4200000
5200000
6200000
8200000
PART NUMBER
4209900
5209900
6209900
www.mchc.ie
TO SUIT
HOSE SIZE
4"
5"
5"
2"
3"
6"
2"
3"
4"
5"
8"
131
PART NUMBER
4204000
4204005
5204000
5204002
5204003
6204000
6204002
6204003
6204004
6204005
8204000
Perrot Fittings
THREAD
SIZE
6"
PART NUMBER
6206000
TO SUIT
HOSE SIZE
4"
5"
6"
4"
5"
PART NUMBER
4204090
5204090
6204090
6204094
6204095
FLANGE
SIZE
6"
PART NUMBER
6203090
FLANGE
SIZE
6"
6"
8"
PART NUMBER
5203000
6203000
8203000
FLANGE
SIZE
6"
PART NUMBER
6203050
www.mchc.ie
FLANGE
SIZE
6"
6"
8"
132
TYPE
PART NUMBER
Standard
Kramp
Kramp
6205550
6205550KR
8205550
Perrot Fittings
FLANGE
SIZE
6"
8"
PART NUMBER
6205630
8205630
THREAD
SIZE
6"
PART NUMBER
6205560
COUPLING
SIZE
4"
5"
6"
8"
PART NUMBER
160mm
190mm
220mm
306mm
18.0mm
22.0mm
22.0mm
25.0mm
4650000
5650000
6650000
8650000
COLOUR
PART NUMBER
Galvanised
6107200
PART NUMBER
COUPLING
SIZE
Male
6"
REPLACEMENT PARTS
www.mchc.ie
6680000
175187
6720500
133
Italian Fittings
OM Male Coupling with Threaded End
COUPLING
SIZE
60mm
3"
4"
5"
6"
THREAD
SIZE
2"
3"
4"
5"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
OM03
OM133
OM132
OM131
OM13
HOSE
SIZE
60mm
3"
4"
5"
6"
8"
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
OM1060
OM103
OM102
OM101
OM10
OM108
FLANGE
SIZE
6"
COLOUR
PART NUMBER
Galvanised
OM28
COLOUR
PART NUMBER
Black
Black
OM324
OM326
OM Male Blank
COUPLING
SIZE
4"
6"
COLOUR
PART NUMBER
Black
Black
Black
Black
OM1880
OM182
OM181
OM18
www.mchc.ie
COLOUR
PART NUMBER
Black
Black
OM171
OM17
134
Italian Fittings
FLANGE
SIZE
6"
COLOUR
PART NUMBER
Galvanised
OM608
HOSE
SIZE
2"
3"
4"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
Galvanised
OM602
OM603
OM604
OM607
THREAD
SIZE
4"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
OM142
OM14
HOSE
SIZE
2"
60mm
3"
60mm
4"
5"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
OM40
OM02
OM93
OM932
OM92
OM91
OM9
www.mchc.ie
FLANGE
SIZE
6"
135
COLOUR
PART NUMBER
Galvanised
OM29
Italian Fittings
OM304
OM305
OM306
www.mchc.ie
HOSE
SIZE
4"
5"
6"
135a
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
OM304
OM305
OM306
Italian Fittings
COLOUR
PART NUMBER
Black
Black
Black
OM192
OM191
OM19
COLOUR
PART NUMBER
Black
OM38
COLOUR
PART NUMBER
Black
Black
Black
Galvanised
OM3180
OM31
OM316
OM316Z
COLOUR
Black
Black
STAR
NUMBER
SLGP3PC4
-
PART NUMBER
OM4
OM46
www.mchc.ie
COUPLING
SIZE
60mm
3"
4"
5"
6"
105mm
130mm
150mm
170mm
210mm
10mm
12mm
12mm
15mm
15mm
136
STAR
NUMBER
SLGPO4
-
PART NUMBER
OM50
OM223
OM222
OM221
OM22
Italian Fittings
OM Male-Female 90 Coupling
FEMALE SIZE
6"
MALE SIZE
6"
COLOUR
Galvanised
PART NUMBER
OM30
Male
Female
Male
COUPLING
SIZE
6"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
OM5
OM6
COLOUR
PART NUMBER
Galvanised
Galvanised
OM20
6780017
PART NUMBER
OM Sprinkler Assembly
TYPE
COUPLING
SIZE
Male
6"
6"
Female
REPLACEMENT PARTS
Female
6680000
175187
OM26
TYPE
COUPLING
SIZE
Male
6"
Female
6"
REPLACEMENT PARTS
COLOUR
PART NUMBER
Galvanised
Galvanised
6760017
6770017
PART NUMBER
6680000
175187
6720500
Female
www.mchc.ie
137
Italian Fittings
OM Female 3 Clamp Precision Sprinkler c/w Large Plate
TYPE
COUPLING
SIZE
Female
6"
REPLACEMENT PARTS
COLOUR
PART NUMBER
Galvanised
OM21
PART NUMBER
6680000
175187
OM211
OM211A
OM Male 70 Sprinkler
COUPLING
SIZE
6"
COLOUR
PART NUMBER
Galvanised
OM24
OM Female 70 Sprinkler
COUPLING
SIZE
6"
COLOUR
PART NUMBER
Galvanised
OM23
COLOUR
Galvanised
Galvanised
STAR
NUMBER
SLGPSC4
VTGPSC6
www.mchc.ie
138
PART NUMBER
OM7
OM71
PART NUMBER
OM16Z
Bauer Fittings
Bauer Type Male Coupling with Hose End
COUPLING
SIZE
3"
4"
5"
6"
8"
TO SUIT
HOSE SIZE
3"
4"
5"
6"
8"
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
BA3093Z
BA3094Z
BA3095Z
BA3096Z
BA3098Z
THREAD
SIZE
2"
3"
4"
5"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
BA3112Z
BA3113Z
BA3114Z
BA3115Z
BA3116Z
FLANGE
SIZE
5"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
BA3135Z
BA3136Z
COLOUR
PART NUMBER
Black
Black
Galvanised
Black
Galvanised
Black
Galvanised
Black
Galvanised
BA304312B
BA3044B
BA3044Z
BA3045B
BA3045Z
BA3046B
BA3046Z
BA3048B
BA3048Z
www.mchc.ie
COLOUR
PART NUMBER
Black
Black
Black
Black
Black
Black
BA3032B
BA303312B
BA3034B
BA3035B
BA3036B
BA3038B
139
Bauer Fittings
COLOUR
PART NUMBER
Black
Black
Black
Galvanised
BA3013B
BA30189B
BA3014B
BA3014Z
COLOUR
PART NUMBER
Galvanised
Galvanised
BA3155Z
BA3156Z
FEMALE
SIZE
3"
4"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
BA31934Z
BA31945Z
BA31865Z
FEMALE
SIZE
4"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
BA3284Z
BA3286Z
www.mchc.ie
TO SUIT
HOSE SIZE
2"
3"
4"
5"
6"
8"
140
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
BA31050Z
BA3103Z
BA3104Z
BA3105Z
BA3106Z
BA3108Z
Bauer Fittings
Bauer Type Female Coupling with Threaded Tube
COUPLING
SIZE
2"
4"
5"
6"
THREAD
SIZE
2"
4"
5"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
Galvanised
BA3122Z
BA3124Z
BA3125Z
BA3126Z
FLANGE
SIZE
5"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
BA3145Z
BA3146Z
COLOUR
PART NUMBER
Black
Black
Black
Black
Black
BA302312B
BA3024B
BA3025B
BA3026B
BA3028B
COUPLING
SIZE
50mm
3 1/2"
4"
5"
6"
8"
PART NUMBER
134
162
188
208
258
13
15
18
19
19
BA3052
BA30535
BA3054
BA3055
BA3056
BA3058
www.mchc.ie
141
PART NUMBER
BA360C
Bauer Fittings
COLOUR
PART NUMBER
Galvanised
BA3436Z
COLOUR
PART NUMBER
Galvanised
BA3446Z
HOSE
SIZE
5"
4"
5"
6"
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
Galvanised
BA3535Z
BA35364Z
BA35365Z
BA3536Z
www.mchc.ie
HOSE
SIZE
5"
142
COLOUR
PART NUMBER
Galvanised
BA3545Z
General Fittings
PART NUMBER
6309900
PART NUMBER
4305000
5305000
6305000
PART NUMBER
4304000
5304000
6304000
8304000
PART NUMBER
6306000
www.mchc.ie
PART NUMBER
4304090
5304090
6304090
8304090
143
General Fittings
LENGTH
500mm
1000mm
PART NUMBER
6303005
6303010
PART NUMBER
6303045
PART NUMBER
6303090
LENGTH
300mm
PART NUMBER
6360000
www.mchc.ie
PART NUMBER
6370000
144
General Fittings
ROUND
FLANGE SIZE
6"
8"
PART NUMBER
6303300
6300833
PART NUMBER
4300001
6300001
8300001
PART NUMBER
5300000
6300000
PART NUMBER
6309800
8309800
PART NUMBER
4339800
6339800
8339800
www.mchc.ie
PART NUMBER
GPUTRI200
145
General Fittings
PART NUMBER
6008900
LENGTH
COLOUR
DESCRIPTION
PART NUMBER
200mm
250mm
250mm
250mm
250mm
150mm
185mm
Galvanised
Galvanised
Galvanised
Galvanised
Galvanised
Black
Black
4404000
OM2502
OM2501
OM250
8404000
OM150
4400001
90 Hose Joiner
TUBE SIZE
6"
PART NUMBER
6404090
PART NUMBER
5630000
6630000
8630000
PART NUMBER
6640000
OM Jetting Nozzle
COUPLING
SIZE
50mm
50mm
60mm
www.mchc.ie
OUTLET
SIZE
35mm
25mm
45mm
146
COLOUR
PART NUMBER
Galvanised
Galvanised
Galvanised
OM39
OM3925
OM04
General Fittings
www.mchc.ie
MESH
7mm holes
7mm holes
8mm holes
10mm holes
146a
PART NUMBER
2670000
3670000
4670000
6670000
General Fittings
Threaded Tube - Black
TUBE SIZE
3"
3"
4"
5"
6"
LENGTH
75mm
150mm
150mm
150mm
150mm
PART NUMBER
3600075
3600150
4600000
5600000
6600000
OM 90 Bend
X:
493mm
SIZE
6"
COLOUR
Black
PART NUMBER
OM90
Weld-On 90 Bend
SIZE
4"
5"
6"
8"
THICKNESS
5mm
4mm
4mm
5mm
X
120mm
180mm
210mm
280mm
PART NUMBER
4900000
5900000
6900000
8900000
X
108mm
PART NUMBER
FG4504N
FG4506N
Weld-On 45 Bend
SIZE
4"
6"
THICKNESS
3mm
3mm
PART NUMBER
0040300B
0042500B
0050400
0060500B
www.mchc.ie
CLIP TO SUIT
149161
175187
147
PART NUMBER
5680000
6680000
General Fittings
INLET SIZE
1/2" Female
2" Female
PART NUMBER
GB112T
GB2T12
INLET SIZE
1/2" Female
1/2" Female
PART NUMBER
GB130R
GB2R12
THREAD SIZE
1 1/2" Male
2" Male
3" Male
PART NUMBER
GB280
GB2
GB3
TUBE LENGTH
100mm
PART NUMBER
GB231
THREAD SIZE
1 1/2" Male
4" Male
PART NUMBER
GB147112
13025343
THREAD SIZE
4" Female
PART NUMBER
12016328
Hex Nipples
DESCRIPTION
Hex nipple 1 1/2"
Hex nipple 2"
Hex nipple 3"
Pipe Fitting
THREAD SIZE
1 1/2" Male
Plug
DESCRIPTION
Plug 1 1/2"
Plug 4"
Socket
DESCRIPTION
Socket 4"
www.mchc.ie
148
General Fittings
A
B
6 bar (90psi)
-15 to +80C
360
DIMENSIONS (mm)
A
B
C
D
350 144 15 320
410 144 15 370
200
250
E
500
560
SEAL RING
TO SUIT
COMPLETE
PART NUMBER
5030210025BP
5030210027BP
6080200313BP
6080200314BP
SEAL RING
TO SUIT
COMPLETE
PART NUMBER
5030210021BP
5030210023BP
5030210025BP
5030210027BP
20014BP
20016BP
20018BP
200110BP
O Ring
A
D
Swivel Joint
SIZE
Inch
4"
6"
8"
10"
100
150
200
250
DIMENSIONS (mm)
A
B
C
250
127
15
290
127
15
350
127
15
410
127
15
D
220
260
320
370
www.mchc.ie
149
100
150
200
250
A
250
290
350
410
C
15
15
15
15
PART NUMBER
20024BP
20026BP
20028BP
200210BP
Hose
Standard
Tanker
Hose
Flexible tube in PVC, superelastic and low temperature resistance, reinforced with an interior shock-resistant
virtually non-deformable rigid spiral giving it great consistency
-25C to +60C.
9 m.H2O (Except for 10" which is 7 m.H2O)
Suction and impulsion pumping of liquid manure and chemical products. Pneumatic transport of seed and
cereal. Due to the high flexibility, it is recommended for use on tankers
The inside wall of the tube is smooth thus preventing the build up of sediment and facilitating tube sterilization.
Non-toxic. Good resistance to suction, impulsion, abrasion, atmospheric agents and various chemical
products
I.D.
Inch
1"
1 1/4"
1 1/2"
1 3/4"
2"
WALL
THICKNESS
WEIGHT
(per metre)
BENDING
RADIUS
WORKING BURSTING
PRESSURE PRESSURE
4.4mm
4.4mm
4.4mm
5.0mm
5.2mm
5.5mm
6.0mm
6.5mm
6.5mm
6.7mm
500g
600g
700g
900g
1050g
1250g
1390g
1700g
1850g
2250g
100mm
130mm
150mm
180mm
200mm
240mm
250mm
300mm
320mm
360mm
7.0 bar
6.0 bar
6.0 bar
6.0 bar
5.0 bar
4.5 bar
4.5 bar
4.0 bar
3.5 bar
3.5 bar
21.0 bar
18.0 bar
18.0 bar
18.0 bar
15.0 bar
13.5 bar
13.5 bar
12.0 bar
10.5 bar
10.5 bar
3 1/2"
mm
25mm
32mm
38mm
45mm
50mm
60mm
63mm
76mm
80mm
90mm
4"
102mm
7.3mm
2700g
410mm
3.0 bar
9.0 bar
5"
127mm
8.3mm
3900g
500mm
2.5 bar
7.5 bar
6"
152mm
9.0mm
5000g
600mm
2.0 bar
6.0 bar
10"
254mm
15mm
14000g
1000mm
1.5 bar
4.5 bar
2 1/2"
3"
ROLL
LENGTH
PART NUMBER
30m
30m
30m
30m
30m
30m
30m
30m
30m
30m
5m
10m
20m
30m
10m
30m
10m
30m
10m
1000300
1250300
1500300
1750300
2000300
2600300
2500300
3000300
2800300
3500300
400030005
400030010
400030020
400030030
500030010
500030030
600030010
600030030
10000300
LENGTH
PART NUMBER
15 feet
20 feet
15 feet
20 feet
5 metres
6 metres
5000315
5000320
6000315
6000320
8000305
8000306
I.D.
mm
WALL
THICKNESS
WEIGHT
(per metre)
BENDING
RADIUS
5"
127mm
8.3mm
3900g
500mm
2.5 bar
7.5 bar
6"
152mm
9.0mm
5000g
610mm
2.0 bar
6.0 bar
8"
203mm
13mm
10000g
800mm
2.0 bar
6.0 bar
www.mchc.ie
WORKING BURSTING
PRESSURE PRESSURE
150
Hose
Heduflex Rubber Suction / Discharge Hose
Description:
Colour:
Material Int.:
Material Ext.:
Temp. Range:
Applications:
Advantages:
I.D.
Inch
3"
4"
5"
mm
60mm
76mm
80mm
102mm
127mm
www.mchc.ie
O.D.
WALL
WORKING
PRESSURE
BURSTING
PRESSURE
ROLL
LENGTH
PART NUMBER
73mm
90mm
95mm
116mm
144mm
6.5mm
7.0mm
7.5mm
7.0mm
8.5mm
10 bar
10 bar
10 bar
10 bar
10 bar
30 bar
30 bar
30 bar
30 bar
30 bar
40m
20 / 40m
40m
20 / 40m
20m
9600900
9750900
9800900
9102900
9127900
151
Hose
Layflat Hose
Description:
Temp. Range:
Applications:
Advantages:
Flat flexible hose made of plasticised PVC with interior polyester fibre
reinforcement
-10C to +60C.
Transfer and transport of drinking water, fertilizers and other liquids
used in agricultural and construction irrigations, etc. Non-toxic, but not
for use with food
A textile reinforced interior allows it to withstand average working
pressures. Thanks to its flat structure it is very easy to handle,
easily rolled up and does not take up much space. Very flexible,
permeable and lightweight.
I.D.
mm
WEIGHT
(per metre)
WORKING
PRESSURE
BURSTING
PRESSURE
ROLL
LENGTH
2"
50mm
285g
1.5 bar
4.5 bar
100m
2 1/2"
63mm
325g
1.0 bar
3.0 bar
100m
3"
76mm
375g
1.0 bar
3.0 bar
100m
102mm
550g
1.0 bar
3.0 bar
4"
Note: Additional Metric and Imperial sizes are available on request.
100m
COLOUR
Grey
Yellow
Dark Orange
Grey
Grey
Blue
Grey
PART NUMBER
2020000
2020000Y
2020000OR
2025000
2030000
2030000BLUE
2040000
www.mchc.ie
152
ROLL
LENGTH
COLOUR
PART NUMBER
100m
100m
100m
100m
100m
50m
100m
50m
50m
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
1015000
1020000
1025000
1030000
1040000
105000050
1050000
1060000
1080000
Hose Clips
1 Piece Hose Clip
TO SUIT
PART NUMTO SUIT
PART NUMHOSE SIZE
BER
HOSE SIZE
BER
mm
Inch
mm
Inch
17 - 19mm
1719
86 - 91mm
3"
8691
20 - 22mm
2022
92 - 97mm
9297
23 - 25mm
2325
98 - 103mm
98103
104112
26 - 28mm
2628
104 - 112mm
113 - 121mm
4"
113121
29 - 31mm
2931
122 - 130mm
122130
32 - 35mm
3235
131 - 139mm
131139
36 - 39mm
3639
140 - 148mm
5"
140148
40 - 43mm
4043
149 - 161mm
149161
44 - 47mm
4447
162 - 174mm
6"
162174
48 - 51mm
4851
175 - 187mm
175187
52 - 55mm
5255
2"
5659
188 - 200mm
188200
56 - 59mm
60 - 63mm
6063
201 - 213mm
201213
64 - 67mm
6467
205 - 220mm
205220
68 - 73mm
2 1/2"
6873
214 - 226mm
8"
214226
74 - 79mm
7479
227 - 239mm
227239
80 - 85mm
8085
240 - 252mm
240252
Note: 1 Piece Hose Clips are available in Stainless Steel, just add SS to the end of the
part number e.g. 1719SS.
PACK
QTY
100
100
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
25
STAINLESS STEEL
PART NUMBER
SGT713RVS
SGT1016RVS
SGT1319RVS
SGT1627RVS
SGT1929RVS
SGT2335RVS
SGT2540RVS
SGT3045RVS
SGT3250RVS
SGT4060RVS
SGT5070RVS
SGT6080RVS
SGT7090RVS
SGT80100RVS
SGT90110RVS
SGT100120RVS
SGT110130RVS
SGT120140RVS
SGT130150RVS
SGT140160RVS
SGT150170RVS
SGT160180RVS
SGT170190RVS
SGT180200RVS
PART NUMBER
SGT1016
SGT1319
SGT1627
SGT1929
SGT2335
SGT2540
SGT3045
SGT3250
SGT4060
SGT5070
SGT6080
SGT7090
SGT80100
SGT90110
SGT100120
SGT110130
SGT120140
SGT130150
SGT140160
SGT150170
SGT160180
SGT170190
SGT180200
Note: Other clips are available from stock, see our webshop at www.mchc.ie
or contact a member of our Sales Staff for further details.
www.mchc.ie
153
IN
RUBIN
IE
OF
FI
ER
O L
O
Valves
ET
T
E
P I
SIZE
4"
5"
6"
8"
Standard
Large Housing
Less Spindle
Standard
Standard
Large Housing
Large Housing
Less Spindle
THREAD
THREAD
4000066
5000007
6000007
-
THREAD
THREAD
6000070
-
THREAD
FLANGE
5000080
6000080
-
FLANGE
FLANGE
4000072
5000072
6000072
8000072
FLANGE
FLANGE
6000060
-
FLANGE
FLANGE
4000061
6000061
-
6000072
6" Valve
6890000
6205630
6205550
Handle Kit 6" QR Female 6" QR Female
6860000
6890000
&
8890000
Nuts &
Bolts
PART NUMBER
6000072KIT1
6000072KIT2
Operating Handle
to suit MZ Gate Valves
4 Piece bracket c/w fitting Bolts & Nuts
DESCRIPTION
To suit 4", 5" and 6" MZ valves
To suit 8" MZ valves
PART NUMBER
6890000
8890000
Operating Handle
to suit MZ Gate Valves
4 Piece bracket c/w fitting Bolts & Nuts
DESCRIPTION
To suit 6" MZ valves
www.mchc.ie
154
PART NUMBER
6860000
Valves
RUBIN
ET
METALTECNICA s.r.l.
IE
OF
FI
ER
IN
O L
O
E
P I
6" Flange / Flange Gate Valve c/w Spring Return Hydraulic Ram
High Quality Italian made Brass valve
Supplied c/w O rings
Fitted with spring return hydraulic ram
DESCRIPTION
6" Standard flange / flange valve c/w spring return ram
6" Large housing flange / flange valve c/w spring return ram
PART NUMBER
6000072RAM
6000060RAM
Spring Return
Double Acting
RUBIN
ET
METALTECNICA s.r.l.
IE
OF
FI
ER
IN
PART NUMBER
0004000
6003055DW
O L
O
E
P I
8" Flange / Flange Gate Valve c/w Gas Return Hydraulic Ram
High Quality Italian made Brass valve
Supplied c/w O rings
Fitted with gas return hydraulic ram
DESCRIPTION
8" Valve complete with gas return hydraulic ram
PART NUMBER
8000572DW
Gas Return
Double Acting
PART NUMBER
0008000CZ
00080DA
2
1
3
4
www.mchc.ie
DESCRIPTION
Small plate (Thickness 8x25mm)
Nut
Graphite ring
Top housing
155
VALVE SIZE
6"
6"
6"
PART NUMBER
6025716
6045700
6060500
6095716
Valves
RUBIN
ET
METALTECNICA s.r.l.
IE
OF
FI
ER
IN
O L
O
E
P I
3 -Way MZ Valves
Supplied complete with handle
IN
RUBIN
IE
OF
FI
ER
O L
O
SIZE
4"
6"
8"
PART NUMBER
4000002
6000002
8000002
ET
T
DESCRIPTION
3-Way flanged MZ valve c/w handle
3-Way flanged MZ valve c/w handle
3-Way flanged MZ valve c/w handle
E
P I
SIZE
Less Spindle
Double Acting
Ram to suit
Valve Complete
with D/A Ram
COMPLETE
WITH SPINDLE
40000KN
60000KN
80000KN
LESS
SPINDLE
40061KN
60061KN
80061KN
DOUBLE ACTING
RAM TO SUIT
0006DAK
0008DAK
VALVE C/W
D/A RAM
40572KN
60572KN
80572KN
RUBIN
ET
T
IN
METALTECNICA s.r.l.
IE
OF
FI
ER
4"
6"
8"
Complete with
Spindle
O L
O
E
P I
www.mchc.ie
156
SIZE
3"
4"
PART NUMBER
3000702
4000702
Valves
Gate Type Shut Off Valve
PORT SIZE
3/8" BSP
1/2" BSP
3/4" BSP
1" BSP
1 1/4" BSP
1 1/2" BSP
2" BSP
2 1/2" BSP
3" BSP
4" BSP
PART NUMBER
SOV38
SOV12
SOV34
SOV1
SOV114
SOV112
SOV2
SOV212
SOV3
SOV4
PART NUMBER
SOV1LGV
PART NUMBER
LTVFF14
LTVFF38
LTVFF12
LTVFF34
LTVFF1
LTVFF114
LTVFF112
LTVFF2
LTVFF212
LTVFF3
LTVFF4
www.mchc.ie
PART NUMBER
LTVMF38
LTVMF12
LTVMF34
LTVMF112
157
Tanker Parts
1
2
4
IN
RUBIN
ET
T
METALTECNICA s.r.l.
IE
OF
FI
ER
O L
O
E
P I
TO SUIT
MZ 4" Gate valve
MZ 6" Gate valve
MZ 8" Gate valve
PISTON TO SUIT
0003001
-
COMPLETE RAM
0004004
0003000
0008000CZ
TO SUIT
RIV Gate valve
PISTON TO SUIT
-
COMPLETE RAM
0005000
SEAL KIT
TO SUIT
SK23
REPLACEMENT
SPRING
0004SPRING
COMPLETE
PART NUMBER
0004400
0004000
Oil Droppers
DESCRIPTION
PART NUMBER
Single / Double oil dropper (1/4" BSP)
0025031*
Triple oil dropper (1/4" BSP)
0025050
* 0025031 is supplied complete with 2 hose tails and one blanking plug, which
allows it to be used as either a single or a double oil dropper
WEIGHT
105g
170g
240g
400g
MATERIAL
Rubber
Rubber
Rubber
Rubber
PART NUMBER
0060111R
0070111R
0080110R
0100111R
MATERIAL
Plastic
Plastic
Plastic
Plastic
PART NUMBER
0060110P
0080110P
0100110P
0120110P
www.mchc.ie
WEIGHT
95g
180g
330g
200g
158
Tanker Parts
Safety Valves
SIZE
1 1/4" BSP
1 1/2" BSP
2" BSP
PART NUMBER
0125013
0150013
0200013
PART NUMBER
086040000
086050000
Decompression Valve
SIZE
1 1/2" BSP
PART NUMBER
081040000
PART NUMBER
0810040008
Pressure Gauges
SIZE
63mm
63mm
100mm
100mm
THREAD SIZE
1/4" BSP
1/4" BSP
1/2" BSP
1/2" BSP
TYPE
Standard
Glycerine filled
Standard
Glycerine filled
PART NUMBER
0025535
0025035
0050535
0050035
GLASS C/W
O' RING
0200540
0200575
O' RING
ONLY
3535715OR
3538532OR
COMPLETE
PART NUMBER
0200040
0200075
Observation
Glasses
SIZE
2"
3"
www.mchc.ie
159
Tanker Parts
ID
OD
LENGTH
90
1140
80
80
90
1250
1
80
90
1320
Note: Available in different sizes and lengths on request
PART NUMBER
01805002
01805000
01805001
ID
90
THREAD
3"
MATERIAL
Brass
PART NUMBER
01010012F
www.mchc.ie
159a
Tanker Parts
Syphons
GLASS
SIZE
60mm
80mm
0060527
0060527
O' RING
TO SUIT
69912950OR
69912950OR
BALL
0060110P
0080110P
CURVED
PIPE
02408018C
COMPLETE
PART NUMBER
0060026
0080026
PART NUMBER
0060526
PART NUMBER
0080526
5
3A
No.
1
2
3
3A
www.mchc.ie
PART NUMBER
042100000
4
5
KIT
160
DESCRIPTION
Rubber gasket - 121.5 x 111 x 3
Inspection glass - 4"
Rubber gasket - 45 x 30 x 1.5
Rubber gasket - 30 x 14 x 1.5
(to suit brass washer - old type)
Top plate - 38 x 4.5
Hand wheel
Kit: Items 1,2 and 3
NUMBER
0400341
0400340
0400345
0400342
0400343
0400344
0400340KIT
Tanker Parts
SIZE
60mm
80mm
GLASS
THRUSTING
BALL
018045008 016045013
018070008 018070013
SEALING
BALL
0070111R
0100111R
SEALING
BALL SEAL
018070007
COMPLETE
PART NUMBER
018060000
018080000
SIZE
80mm
THRUSTING
BALL
018070013
SEALING
BALL
0080110P
SEALING
BALL SEAL
018070007
COMPLETE
PART NUMBER
016080000
LENGTH
155
THREAD
M8
PART NUMBER
018070018
PART NUMBER
201C60
201C80
4030110006BP
50
110
DESCRIPTION
Slurry injector system boot to suit Abbey
www.mchc.ie
161
PART NUMBER
MI265Z
160
140
M20
DESCRIPTION
M20 Door clamp
COLOUR
Black
PART NUMBER
MG16925
COLOUR
Galvanised
PART NUMBER
16960
COLOUR
Black
PART NUMBER
MG16910
PART NUMBER
MG169101
160
90
27
M20
160
90
DESCRIPTION
M18 Butterfly clamp
REPLACEMENT PARTS
Threaded eye bolt to suit
27
M18
90
160
27
M20
Black
COLOUR
Black
PART NUMBER
MG16970
16
www.mchc.ie
162
PART NUMBER
MI514Z
Vacuum Pumps
SIZE
5 Litre
PART NUMBER
VPO005
L
H
E
I
K
X
B
A
N
MEC8000M
8100 lpm
600rpm
2.5 bar
1.5 bar
-0.80 bar
-0.94 bar
15 kW
24 kW
9.5 kW
21 kW
1 3/8"
1 1/2" BSP
160 Kg
A B C D
E
F
G H
I
L M N K
X
761 410 623 80 313 252 196 15 227 95 597 813 195 215
PART NUMBER
MEC8000M
DESCRIPTION
8000 litre Hydraulic driven vacuum pump c/w motor
www.mchc.ie
163
PART NUMBER
MEC8000HC/WMOTOR
Vacuum Pumps
35
36
A
11
12
34
13
15
33
32
37
38
15
31
24
2
29
23
28
21
22
30
40
20
39
19
18
41
22
9
20
6
26
10
17
25
8
12
27
11
13
14
16
15
Spare Parts to suit MEC 5000, 6500 & 8000 M Series Pumps
No. DESCRIPTION
TO QTY
PART
SUIT
NUMBER
1 Back cover
All
1
AM3BP
2 Gasket
All
2
AM4BP
MEC 5000 Body
5000
1
AM1BP
3 MEC 6500 Body
6500
1
AMEC1BP
MEC 8000 Body
8000
1
AME1BP
MEC 5000 Rotor
5000
1
AM5BP
4 MEC 6500 Rotor
6500
1
AMEC5BP
MEC 8000 Rotor
8000
1
AME5BP
5 Bolt M10x16
All
1
M1016DIN933
6 Washer M10
All
1
M10DIN125A
7 Bearing
All
1
6304
8 Bolt M10x25
All
20
M1025VR
9 Bearing
All
2
6208
Gear 55 teeth
5000
1
AM26BP
10
Gear 53 teeth
65/80
1
AME26BP
11 Bearing
All
1
6307
12 Seal 35x62x10
All
1
356210
13 Cover gasket
All
1
AM28BP
14 Cover
All
1
AM29BP
15 Bolt M8x25
All
20
M825DIN933
Black cone bolt-on
All
1
G130BP
16
Orange cone push-on
All
1
AM43ABP
17 Bolt M6x16
All
4
M616DIN933
Lock nut M24x2
5000
1 5050300001BP
18
Lock nut M27x2
65/80
1 5050300002BP
Gear 21 teeth
5000
1
AM33BP
19
Gear 23 teeth
65/80
1 4020607059BP
20 Internal circlip 80
All
2
HUIS80
21 Plug 3/8"
All
1
AM30BP
22 Seal 48x62x8
All
4
48628
23 Housing
All
1
AM2BP
Repair kits to suit listed on page 176
www.mchc.ie
No. DESCRIPTION
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Stud 3/8"
Vane 300x46.5x6.3
Vane 370x46.5x6.3
Vane 450x46.5x6.3
Key 6x6x25
Threaded dowl
Exhaust
Exhaust gasket
Ball 40mm
Housing
Dipstick - New 136mm
Dipstick - Old 79mm
Spring
Top housing
Top housing
Handle
Seal
Valve
Gasket
Body gasket
Aluminium washer
Iron plug
TO QTY
PART
SUIT
NUMBER
All
1
AM21BP
5000
7
AM7BP
6500
7
AMEC7BP
8000
7 4070113008BP
All
1
SK6625
All
1
AM115BP
All
1
AM36BP
All
1
AM37BP
All
1
AM41BP
All
1
AM38BP
All
1
AM106BP
All
1
AM10BP
All
1
AM45BP
50/65
1
AM61BP
8000
1
AME61BP
All
1
AM60BP
All
1
30407
All
1
AM62BP
All
1
AM42BP
All
1
AM39BP
All
1
AM97BP
All
1
AM96BP
164
TO QTY
PART
SUIT
NUMBER
8000
1 4020507013BP
8000
1 4010601160BP
8000
1 5020400034BP
8000
2
-
Vacuum Pumps
SPECIFICATIONS
Max flow rate
Max RPM
Max absolute pressure
Max relative pressure
Vacuum with depression valve fitted
Max vacuum
Power absorption at 1.5 bar absolute, 540rpm
Power absorption at 1.5 bar relative, 540rpm
Power absorption at 1.5 bar absolute, 1000rpm
Power absorption at 1.5 bar relative, 1000rpm
Splined shaft EN ISO 500
Valve hole
Nett weight
MEC9000M
9030 lpm
600 rpm
2.5 bar
1.5 bar
-0.80 bar
-0.95 bar
36 kW
17 kW
36 kW
17 kW
1 3/8"
BSP
145 Kg
MEC11000M
11137 lpm
600 rpm
2.5 bar
1.5 bar
-0.80 bar
-0.95 bar
21 kW
40 kW
21 kW
40 kW
1 3/8"
BSP
160 Kg
DESCRIPTION
A B C D
E
F
G H
I
L M N
9000 litre Mechanical MEC pump 340 189 141 80 670 22 575 605 69 246 195 195
11000 litre Mechanical MEC Pump 346 247 147 100 740 22 575 605 69 246 195 195
13500 litre Mechanical MEC Pump 391 247 192 100 830 22 575 605 69 246 195 195
O P
390 80
390 80
390 100
MEC13500M
13845 lpm
600 rpm
2.5 bar
1.5 bar
-0.80 bar
-0.95 bar
25 kW
44 kW
25 kW
44 kW
1 3/8"
BSP
178 Kg
PART NUMBER
MEC9000M
MEC11000M
MEC13500M
DESCRIPTION
9000 litre Hydraulic driven vacuum pump c/w motor
11000 litre Hydraulic driven vacuum pump c/w motor
13500 litre Hydraulic driven vacuum pump
13500 litre Hydraulic driven vacuum pump c/w motor
PART NUMBER
MEC9000HC/WMOTOR
MEC11000HC/WMOTOR
MEC13500H
MEC13500HC/WMOTOR
Please Note:
Part Number MEC13500H is not supplied with a Hydraulic Motor.
See page 177 for listings on Hydraulic Motors.
www.mchc.ie
165
Vacuum Pumps
50
18
51
52
49
28
48
55
53
47
18
44
45
54
46
40
28
2
28
39
40
24 25
20
22
26
27
28
33
21
31
43
19
34
35
25
41
32
23
27
42
30
18
36
29
17
8
11
10
26
38
37
9
1
2
6
15
13 12
16
14
Spare Parts to suit New MEC 9000, 11000 & 13500 M Series Pumps
No. DESCRIPTION
TO QTY
PART
SUIT
NUMBER
1 Back cover
All
1 4010401061BP
All
2 4030108048BP
2 Gasket
3 Thermo label
All
1 5101800000BP
9000 Pump body
9000
1 4010101085BP
4 11000 Pump body
11000
1 4010101086BP
13500 Pump body
13000 1 4010101087BP
Vane 300x60x6.5
9000
5 4070113192BP
5 Vane 370x60x6.5
11000
5 4070113193BP
Vane 460x60.6.5
13500 5 4070113194BP
9000 Rotor
9000
1 4010220144BP
6 11000 Rotor
11000
1 4010220145BP
13500 Rotor
13500 1 4010220146BP
7 Housing
All
1 4010301028BP
8 Ball bearing
All
1
6304
53T gear for 540rpm
1 4020507003BP
9
43T gear for 1000rpm
1 4020507012BP
10 Ball bearing
All
1
6307
11 Oil seal 35x62x10
All
1
356210
12 Oil level plug 3/8"
All
1 5060105004BP
13 Cover gasket
All
1 4030108049BP
14 Screw M10x16 TE
All
1 5050107018BP
15 Washer 10x16x1.5
All
1 5050202002BP
16 Screw M6x10 TEF
All
4 5050107107BP
17 Guard cone
All
1 4060505000BP
18 Screw M10x25 TEF
All
17 5050107108BP
19 Gearbox cover
All
1 4010601154BP
20 Oil plug 3/8"
All
1 5060605001BP
21 Lock nut M27x2x16
All
1 5050300002BP
23T gear for 540rpm
1 4020607059BP
22
33T gear for 1000rpm
1 4020607057BP
23 Rotor spacer
All
1 4011707067BP
24 Ring 80
All
1 5050507011BP
25 Washer 80
All
2 5012207001BP
26 Ball bearing
All
2
6208
Repair kits to suit listed on page 176
www.mchc.ie
No. DESCRIPTION
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
166
TO QTY
PART
SUIT
NUMBER
Oil seal 48x62x10
All
2 5030300041BP
Screw M10x25 TE
All
19 5050107109BP
Key 6x6x25
All
1
SK6625
Complete oil level ind.
All
1 4060505039BP
Glass only
All
1
GLASSCM121
Plug 1/8
All
1 5050903003BP
Dipstick
All
1 5060605013BP
Rubber ball 90
All
1 5060410007BP
M10 Plug / vent
All
1 5050903004BP
O Ring
All
1 5030210028BP
Ring 40 - Din 471
All
1 5050507017BP
Plug M16x1.5 Din908
All
1 5050906006BP
Washer 16x20x1.5
All
1 5050202007BP
Suction elbow 76
1 4011501030BP
Suction elbow 80
All
1 4011501031BP
Suction elbow 100
1 4011501032BP
O Ring
All
2 5030210008BP
Top housing
All
1 4010501026BP
Top housing gasket
All
1 4030109035BP
Screw M10x35 TEF
All
4 5050107054BP
Rotating elbow 76
1 4010901018BP
Rotating elbow 80
All
1 4010901019BP
Rotating elbow 100
1 4010901020BP
Elbow flange 76 / 80
1 4010406017BP
All
Elbow flange 100
1 4010406015BP
Cap 2
All
1 5060605006BP
Spring
All
1 4012007011BP
Manifold cover gasket
All
1 4030109025BP
Manifold cover
All
1 4010601056BP
Handle
All
1 4010801024BP
Washer 8x23x4 Din6340 All
1 5050207022BP
Oil seal 35x50x7
All
1
35507
Washer
All
1 5050207031BP
Reversing valve
All
1 4010701018BP
Plug 1 1/2
All
1 5060605005BP
Vacuum Pumps
Force Feed Oil Pump
PART NUMBER
OPOBP
Replacement Parts
2
No.
1
2
3
4
5
DESCRIPTION
Double oil dropper
Hose connection
O' Ring
Key
Oil hose
PART NUMBER
0025031
OP11BP
5030210028BP
OP8BP
AM46BP
PART NUMBER
5040303004BP
9
10
11
4
6
5
3
1 2
12
8
8
Replacement Parts
No.
1
2
3
4
5
14
13
PART NUMBER
LB5DBP
7
8
9
10
11
12
13
14
DESCRIPTION
Key
Housing gasket
Housing
Gasket
Bolt - M5x12
Oil pump RH
Oil pump LH
Connection
90 Hose connection
Oil pipe
Hose connection
Grease nipple M10x1
Oil pipe
Oil pipe support
Oil pipe
PART NUMBER
LA2BP
LA22BP
LA1BP
LA4BP
LA7BP
LB5/DBP
LB5/SBP
LA12BP
LA15BP
LB11BP
LB12BP
LA20BP
LB17BP
LB18BP
LB16BP
www.mchc.ie
TO SUIT
AGRI / SE / STAR Pumps
167
PART NUMBER
OP01BP
Vacuum Pumps
41
42
43
24
44
45
40
39
19
46
38
47
37
36
54
28
27
24
25
22
29
24
50
60
55
30
26
61
49
62
34
52
10
2
9
21
13
15
14
17
10
53
33
11
12
26
24
1
3
4
32
16
18
57
56
51
35
31
23
20
59
58
48
19
5
7
Cover
Gasket
Screw M10x55 12.9
Rear pin
Body housing
Body housing
Rotor
Rotor
Vane 350x70x7.5
Vane 400x70x7.5
Rotor shaft (bolt-on)
Front housing
Seal 55x68x8
Washer
Stud
Bearing
Gear 52 teeth
Bearing
Gasket
Cover
Bolt M8x25
Black cone bolt-on
Orange cone push-on
Bolt M6x10
Oil seal 40x62x10
Oil cap 1/2"
Lock nut M30x2x19
Bolt M10x25
Gear 26 teeth
Bearing
Bolt M10x16
Plug 3/8"
Washer M10
Bolt
Washer
Key
www.mchc.ie
TO QTY
PART
SUIT
NUMBER
All
1
AS3BP
All
2 4030108017BP
All
12 5050107103BP
All
1
AS176BP
10000 1
AS174
12000 1
ASE174
10000 1
AS174BP
12000 1
ASE174BP
10000 6 4070113027BP
12000 6
ASE7BP
All
1 4011907075BP
All
1
AS2BP
All
4
55688
All
1
AS157BP
All
1
AS155BP
All
1
6306
All
1
AS26BP
All
1
6308
All
1
AS28BP
All
1
AS150BP
15
M825DIN933
All
1
G130BP
All
1
AM43ABP
All
4
M610DIN933
All
1
406210
All
1
AS21BP
All
1
AS32BP
All
29 M1025DIN933
All
1
AS33BP
All
2
6309
All
1
M1016DIN933
All
1
AM30BP
All
1
M10DIN125A
All
3
M816DIN933
All
3
M8DIN125A
All
1
SK10830
No. DESCRIPTION
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
168
Housing gasket
Housing
Depression valve 1 1/2"
Valve
Spring
Top housing gasket
80mm Top housing
100mm Top housing
76mm Top housing
Oil seal 35x50x7
Handle change over
Handle lock nut
Handle bar
Handle grip
Black plug 2"
Relief valve flange
Gasket
Ball 90mm
Rubber gasket
Flange 80mm exhaust
Flange 100mm exhaust
Exhaust 80mm
Exhaust 100mm
Exhaust 76mm
Washer M10
Bolt M10x35
Dipstick
Hose connector
Gasket
Oil pump
Seal
Back cover
Bolt M6x16
Bolt M6x16
Key
TO QTY
PART
SUIT
NUMBER
All
1
AS39BP
All
1
AS38BP
All
1
081040000
All
1
AS47BP
All
1
AS46BP
All
1
AS42BP
All
1
AS31BP
All
1
ASE31BP
All
1
AS159BP
All
1
35507
All
1
AS22BP
All
1
AS9BP
All
1
AS35BP
All
1
AS15BP
All
1
AS187BP
All
1
AS49BP
All
1
AS50BP
All
1 5060410007BP
All
1 5030210008BP
All
1
AS143BP
All
1
ASE143BP
All
1
AS145BP
All
1
ASE145BP
All
1
AS160BP
All
2
M10DIN125A
All
2
AS144BP
All
1
AS132BP
All
2
AS127BP
All
1
AS13BP
All
1
OP01BP
All
1
AS58BP
All
1
AS57BP
All
6
M616DIN912
All
5
M616DIN933
All
1
0P8BP
Vacuum Pumps
31
47
46
49
45
44
50
48
43
51
16
52
42
28
36
26
34
24
20
18
39
37
25
23
59
58
31
29
30
21
55
31
41
31
27
22
54
53
40
56
38
60
37
35
61
10
19
57
10
30
63
62
2
13 12
15
14
11
33
32
1
31
2
17
16
8
Spare Parts to suit STAR 60 (10000 litre) & STAR 72 (12000 litre) M Series Pumps
No. DESCRIPTION
TO QTY
PART
SUIT
NUMBER
1 Back tank
All
1
ST3BP
All
2 4030108017BP
2 Body gasket
3 Rear pin
All
1
ST210BP
Body
10000 1
ST1BP
4
Body
12000 1
STA1BP
Continuous casting rotor 10000 1
ST208BP
5
Continuous casting rotor 12000 1
STA208BP
Vane 350x70x7.5
10000 6
AS7BP
6
Vane 400x70x7.5
12000 6
ASE7BP
7 Front pin
All
1
ST209MBP
8 Bolt M10x50 12.9
All
12
ST211BP
9 Gearbox
All
1
ST2BP
10 Oil seal 55x68x8
All
4
55688
11 Washer 16x20mm
All
1
ST14BP
12 Stud
All
2
ST115BP
13 Bearing
All
1
6306
14 Gear with shaft 52 teeth
All
1
ST26MBP
15 Bearing
All
1
6308
16 Bolt
All
12
M825VR
17 Bolt M6x10
All
4
M610DIN933
18 Black cone bolt-on
All
1
ST149BP
19 Oil seal 40x62x10
All
1
406210
20 Front Cover
All
1
ST29BP
21 Front cover a gasket
All
1
ST28BP
22 Oil plug 1/2"
All
1
ST21BP
23 Lock nut M30x2x19mm
All
1
ST32BP
24 Gear 26 teeth
All
1
ST33BP
25 Bolt M8x16
All
3
M816DIN933
26 Washer 8x23 DIN6340
All
3
ST214
27 Bolt M10x16
All
1
ST23BP
28 Oil level plug 3/8"
All
1
ST30BP
29 Washer
All
1
ST24BP
30 Bearing
All
1
6309
31 Bolt M10x25
All
29
M1025VR
32 Key 10x8x30
All
1
SK10830
Repair kits to suit listed on page 176
www.mchc.ie
No. DESCRIPTION
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
169
TO QTY
PART
SUIT
NUMBER
All
1
ST143BP
All
1
STA143BP
All
4
M1035DIN933
All
4
M10DIN125A
All
1 4010901018BP
All
1 4010901019BP
All
1 4010901020BP
All
2
ST142BP
All
1
ST39BP
All
1
ST38BP
All
1
ST56BP
All
1
ST50BP
All
1
ST49BP
All
1
AS187BP
All
1
ST31BP
All
1
ST15BP
All
1
M10DIN934
All
1
ST10BP
All
1 4030109025BP
All
1
35507
All
1 4010601056BP
All
1
ST46BP
All
1
ST47BP
All
1
081040000
All
1
ST8BP
All
1
STA8BP
All
1
STAR8BP
All
1
ST132BP
All
2
ST127BP
All
1
ST86BP
All
1
ST58BP
All
1
ST57BP
All
10
M616DIN912
All
5
M616VR
All
1
OP01BP
All
1
ST13BP
Vacuum Pumps
Q
S
R
N
F
E
H
B
Garda 75 Pump
G758000
G759000
G7511000
G7513500
Vacuum Pump Vacuum Pump Vacuum Pump Vacuum Pump
8100 lpm
8100 lpm
11000 lpm
135000 lpm
600 rpm
600 rpm
600 rpm
600 rpm
-
SPECIFICATIONS
Max flow rate
Max flow rate with 34 nozzle
Max RPM
Speed work on request
Head
Power absorption at max pressure
Centrifuge
Pump
6500 lpm
2100 lpm
540 rpm
1000 rpm
70 m
60 kW
918
725
80
486 831
17
77
13
105
90
PART NUMBER
G758000
G758000
MECHANICAL*
810
730
80
487 705
17
80
13
105
90
865
730
80
487 775
17
80
13
105
90
935
730
80
487 863
17
80
13
105
90
PART NUMBER
G759000
G759000
MECHANICAL*
G7511000
G7511000
MECHANICAL*
G7513500
G7513500
MECHANICAL*
www.mchc.ie
170
PART NUMBER
MEC8000G
MEC9000G
MEC11000G
MEC13500G
Vacuum Pumps
46
23 / 24
45
47
44
43
57
55
42
48
49
50
41
53
58
22
56
54
20
19
52 14
51
21
40
25
19
38
39
26
20
35
36
37
12
27
18
16
38
17
28
15
22
13
33
34
20
29
20
32
30
14
9
31
11
14
10
5
7
13
1
4 3
8
9
Spare Parts to suit Garda 75 Pump - Gearbox Section with Preshaped Ring
No. DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Gearbox
Splined central shaft
Washer
Screw
Oil level plug
Oil seal 35x62x10
Front cover gasket
Gearbox front cover
Bolt M10x25
Bolt M6x16
Guard cone
Front cover
Front and back cover gasket
Ball bearing
Large gear 86 teeth
Support gasket
Seal holder
Packing ring 50x70x10
Bolt M12x30
Washer 12
Impellor support
Sealing ring
Sludge inlet plate
Flange
Self locking nut
Washer
Sludge rotar
Sludge pump housing
Aluminium washer
www.mchc.ie
QTY
1
2
1
1
1
1
1
1
12
4
1
1
2
3
1
1
1
6
16
24
1
2
1
1
1
1
1
1
1
PART
NUMBER
G1BP
G26BP
G24BP
G23BP
G28BP
356210
G22BP
4010601122BP
M1025VR
M616VR
G130BP
G6BP
G7BP
6307
G61BP
G41BP
G48BP
G47BP
M1230DIN933
M12DIN125A
G38BP
G42BP
G59BP
G53BP
G37BP
G30BP
G52BP
G49BP
G51BP
No. DESCRIPTION
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
171
QTY
1
1
2
2
4
1
1
1
2
2
1
1
1
1
1
7
3
1
1
1
1
1
8
8
1
1
1
1
1
PART
NUMBER
G50BP
G58BP
G43BP
G44BP
M1235DIN933
G29BP
G16BP
G10BP
G9BP
G8BP
G13BP
G131BP
G102BP
G27BP
G15BP
M820DIN933
G57BP
G56BP
G31BP
G32BP
G17BP
G33BP
M8DIN9021A
M845DIN933
G34BP
SK8750
4210
507010
G46BP
Vacuum Pumps
56
44
43
55
45
42
41
17
18
20
53
40
54
52
46
47
48
39
51
23
14
50
24
49
36
17
33
34
25
27
18
37
21 / 22
20
19
38
26
16
36
15
35
28
32
18
29
13
12
31
9
30
14
13
14
11
1
6
10
7
8
9
Spare Parts to suit Garda 75 Pump - Gearbox Section with Mechanical Seal
No. DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Gearbox
Splined central shaft
Washer
Screw
Oil level plug
Oil seal 35x62x10
Front cover gasket
Gearbox front cover
Bolt M10x25
Bolt M6x16
Guard cone
Front cover
Front and back cover gasket
Ball bearing
Large gear 86 teeth
Support gasket
Bolt M12x30
Washer 12
Impellor support
Sealing ring
Sludge inlet plate
Flange
Self locking nut
Washer
Sludge rotar
Sludge pump housing
Mechanical Seal
Aluminium washer
www.mchc.ie
QTY
1
2
1
1
1
1
1
1
12
4
1
1
2
3
1
1
16
24
1
2
1
1
1
1
1
1
1
1
PART
NUMBER
G1BP
G26BP
G24BP
G23BP
G28BP
356210
G22BP
4010601122BP
M1025VR
M616VR
G130BP
G6BP
G7BP
6307
G61BP
G41BP
M1230DIN933
M12DIN125A
G100BP
G42BP
G59BP
G53BP
G37BP
G30BP
G52BP
G49BP
G98BP
G51BP
No. DESCRIPTION
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
172
QTY
1
1
1
4
1
1
1
2
2
1
1
1
1
1
7
1
1
1
1
1
1
8
8
1
1
1
1
1
PART
NUMBER
G50BP
G58BP
G163BP
M1235DIN933
G29BP
G16BP
G10BP
G9BP
G8BP
G13BP
G131BP
G102BP
G27BP
G15BP
M820DIN933
G57BP
G56BP
G31BP
G32BP
G17BP
G33BP
M8DIN9021A
M845DIN933
G99BP
SK8750
4210
507010
G46BP
Vacuum Pumps
27
28
29
19
26
24
25
30
31
23
17
21
20
22
19
33
34
32
12
17
10
18
19
16
1
2
15
14
5
6
10
7
8
11
12
13
Back cover
Gasket
MEC 8000 Body
MEC 8000 Rotor
Bolt M12x35
Washer M12
Support flange
Support flange gasket
Ring seal
Seal 48x62x8
Bearing
Internal circlip 80
Lock nut M24x2
Lock nut M27x2
Gear with 39 teeth
Gear with 50 teeth
Bolt M10x25
Vane 300x46.5x6.3
Vane 370x46.5x6.3
Vane 450x46.5x6.3
www.mchc.ie
QTY
1
2
1
1
4
4
1
1
1
4
2
2
1
1
1
1
6
7
7
7
PART
NUMBER
AM3BP
AM4BP
AME1BP
AME5BP
M1235DIN933
M12DIN125A
AM100BP
AM101BP
AM107BP
48628
6208
HUIS80
5050300001BP
5050300002BP
AM104BP
AM105BP
M1025DIN912
30046563BP
37046563BP
45046563BP
No. DESCRIPTION
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
173
Key 6x6x25
Threaded dowl
Bolt M10x25
Exhaust
Exhaust gasket
Ball 40mm
Housing
Dipstick - New 136mm
Dipstick - Old 79mm
Spring
Top housing
Top housing
Bolt M8x25
Handle
Seal
Valve
Gasket
Body gasket
Aluminium washer
Iron plug
QTY
1
1
14
1
1
1
1
1
1
1
1
1
9
1
1
1
1
1
1
1
PART
NUMBER
SK6625
AM115BP
M1025VR
AM36BP
AM37BP
AM41BP
AM38BP
AM106BP
AM10BP
AM45BP
AM61BP
AME61BP
M825VR
AM60BP
30407
AM62BP
AM42BP
AM39BP
AM97BP
AM96BP
Vacuum Pumps
37
42
43
44
41
25
40
38
39
45
46
37
36
35
47
31
25
30
31
32
21
34
22
25
33
23
18
24
13
19 20
16 17
15
29
14
12 13
10 11
12
11
27 26
28
9
2
7
4
5
6
Spare Parts to suit Garda 75 Pump - MEC 9000, 11000 & 13500
No. DESCRIPTION
TO QTY
PART
SUIT
NUMBER
1 Back cover
All
1 4010401061BP
All
2 4030108048BP
2 Gasket
9000 Pump body
All
1 4010101085BP
3 11000 Pump body
All
1 4010101086BP
13500 Pump body
All
1 4010101087BP
Vane 300x60x6.5
9000
5 4070113192BP
4 Vane 370x60x6.5
11000
5 4070113193BP
Vane 460x60.6.5
13500 5 4070113194BP
9000 Rotor
9000
1 4010220144BP
5 11000 Rotor
11000
1 4010220145BP
13500 Rotor
13500 1 4010220146BP
6 Flange housing
All
1 4010401062BP
7 Lock nut M27x2x16
All
1 5050300002BP
8 39T gear
All
1 4020607005BP
9 Rotor spacer
All
1 4011707067BP
10 Ring 80
All
1 5050507011BP
11 Washer 80
All
2 5012207001BP
12 Ball bearing
All
2
6208
13 Oil seal 48x62x10
All
2 5030300041BP
14 O Ring
All
1 5030210063BP
15 Screw M10x25 TCEI
All
6 5050107026BP
16 Washer M12
All
4
M12DIN125A
17 Bolt M12x35
All
4
M1235DIN933
Complete oil level ind.
All
1 4060505039BP
18
Glass only
All
1
GLASSCM121
19 Key 6x6x25
All
1
SK6625
20 Thermo label
All
1 5101800000BP
21 Plug 1/8
All
1 5050903003BP
22 Dipstick
All
1 5060605013BP
23 Rubber ball 90
All
1 5060410007BP
Repair kits to suit listed on page 176
www.mchc.ie
No. DESCRIPTION
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
174
TO QTY
PART
SUIT
NUMBER
M10 Plug / vent
All
1 5050903004BP
Screw M10x25 TE
All
19 5050107109BP
O Ring
All
1 5030210028BP
Ring 40 - Din 471
All
1 5050507017BP
Plug M16x1.5 Din908
All
1 5050906006BP
Washer 16x20x1.5
All
1 5050906006BP
Suction elbow 76
1 4011501030BP
Suction elbow 80
All
1 4011501031BP
Suction elbow 100
1 4011501032BP
O Ring
All
2 5030210008BP
Top housing
All
1 4010501026BP
Top housing gasket
All
1 4030109035BP
Screw M10x35 TE
All
4 5050107054BP
Rotating elbow 76
1 4010901018BP
Rotating elbow 80
All
1 4010901019BP
Rotating elbow 100
1 4010901020BP
Elbow flange 76 / 80
1 4010406017BP
All
Elbow flange 100
1 4010406015BP
Screw M10x25 TEF
All
17 5050107108BP
Cap 2
All
1 5060605006BP
Spring
All
1 4012007011BP
Manifold cover gasket
All
1 4030109025BP
Manifold cover
All
1 4010601056BP
Handle
All
1 4010801024BP
Washer 8x23x4 Din6340 All
1 5050207022BP
Oil seal 35x50x7
All
1
35507
Washer
All
1 5050207031BP
Reversing gear
All
1 4010701018BP
Plug 1 1/2
All
1 5060605005BP
Vacuum Pumps
www.mchc.ie
Dispensers
Battioni Dispensers
are available in several
configurations to suit your
requirements. Manufactured
from hot galvanised steel
175
Vacuum Pumps
TO SUIT SERIES
TO SUIT PUMP
MEC8000
SE10000
ST10000
ST12000
MEC9000
MEC11000
MEC13500
ST Series
MEC New Series
Kit without bearings shown
KIT
NO BEARINGS
6010201008BP
6010201009BP
6010201011BP
6010201012BP
6010201080BP
6010201081BP
6010201082BP
KIT
C/W BEARINGS
6010201046BP
-
WIDTH
mm
70
46.5
THICKNESS
mm
7.5
6.5
TO SUIT
PART NUMBER
ST / SE10000
MEC8000
4070113027BP
4070113008BP
www.mchc.ie
WIDTH
mm
40.5
34
40
41
42
46.5
47
60
70
70
70
52
64
46.5
47
70
70
65
40
46.5
45
176
THICKNESS
mm
6.5
4.5
6
6.2
6.5
6.3
6.5
9.5
4.7
7.5
9.5
7.8
7.4
6.3
6.5
4.7
7.5
9.59
9.5
6.3
6.5
PART NUMBER
27040565BP
2953445BP
300406BP
3004162BP
3004265BP
30046563BP
3004765BP
3306095BP
3507047BP
3507075BP
3507095BP
3605278BP
3606474BP
37046563BP
3754765BP
4007047BP
4007075BP
44365959BP
4504095BP
45046563BP
4704565BP
Vacuum Pumps
Hydraulic Control kit
TO SUIT
BATTIONI PUMPS
MEC5000
MEC6500
MEC8000
ST10000
ST12000
SE10000
SE12000
REPLACEMENT
FITTING
REPLACEMENT
HANDLE
COMPLETE KIT
X2+X3
X7BP
5090000008BP
X2+X3
4011907055BP
6080200030A
PUMP
TYPE
MEC I
(old series)
MEC II
(new series)
AGRI
SE
STAR
www.mchc.ie
PUMP
PART NO.
MEC2000H
MEC3000H
MEC4000H
MEC5000H
MEC6500H
MEC8000H
MEC9000H
MEC11000H
MEC13000H
AGRI10000H
AGRI12000H
SE10000H
SE12000H
STAR10000H
STAR12000H
PORTS
TO SUIT
GEAR
TO SUIT
SEAL KIT
TO SUIT
BACKING RING
TO SUIT
HYD. PUMP
TO SUIT
FG1-51 (x1)
35G114 (x1)
MO3.5/20
PLM93084E4AF
PLM3573R
KM4087R085E5
FG1-51 (x1)
FG112-72.5 (x1)
MO4023
KM94085E5R
KM94010
or
KM4073R085E5
177
Rain Guns
E
B
30
4"
A
971
B
726
C
890
D
34
E
170
F
13
G
3"
PART NUMBER
BP210EBP
4"
A
971
B
-
C
890
D
34
E
170
103
F
13
G
3"
PART NUMBER
BP220EBP
55.3
L
L1
55
82
25
93
106
133
1/2"
13.55
1/4"
8
16
Hydraulic Motor to suit 4" Rain Gun (BP210/220EBP) - Orbital Motor Type SMP (RBP)
DISPLACEMENT
MAX WORKING
MAX SPEED
TORQUE
DIMENSIONS
PART NUMBER
PRESSURE (bar)
cm/rev
P1
P2
P3
rpm
daNm
L
L1
311.7
110
125
125
189
40.6
172
42
SMP315
Note: Alternative motors available. See our Hydraulics catalogue for further details, or ask a member of our Sales Staff.
www.mchc.ie
178
Rain Guns
6
5
2
1
25
4
9
8 10
16
11
1
24
20
13
14
Replacement parts to
suit adjustable arm
(shown on page 178)
are available on request
12
24
1
26
15
13
22
19
18
17
17
18
19
23
21
No.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
O' Ring
Flange Plate
Washer (M10)
Bolt (M10x25)
Tube 3" x 750 mm
Large Nozzle
Small Nozzle
Nut (M8)
Nozzle Needle
Bolt (M8x30)
Bolt (M8x50)
Hydraulic Fitting
Grease Nipple (M6x1)
www.mchc.ie
QTY
3
1
4
4
1
1
1
2
1
1
1
1
2
PART
NUMBER
5030210008BP
4010601079BP
M10DIN125A
M1025DIN933
4011806004BP
4010001003BP
4010001004BP
M830DIN934
4010006004BP
M830DIN933
M850DIN933
4020006003BP
M6180
179
No.
DESCRIPTION
14
15
16
17
18
19
20
21
22
23
24
25
26
Bolt (M6x16)
Flange
Top Seal
Washer
Nut (M10)
Stud
Wear Ring
6.99 x 114.70 O' Ring
Flange Housing
Grease Nipple (M10x1.5)
Guide Ring
Swivel Flange Body
Complete Swivel Body
QTY
4
1
1
2
2
2
2
1
1
1
2
1
1
PART
NUMBER
M616DIN912
4010406006BP
5060205004BP
5050202002BP
M10DIN934
5051007003BP
4011806002BP
69911470OR
4011001020BP
M1015180
5060205002BP
4010101033BP
6100300017BP
Rain Guns
A
B
6 bar (90psi)
-15 to +80C
360
DIMENSIONS (mm)
A
B
C
D
350 144 15 320
410 144 15 370
200
250
E
500
560
SEAL RING
TO SUIT
COMPLETE
PART NUMBER
5030210025BP
5030210027BP
6080200313BP
6080200314BP
SEAL RING
TO SUIT
COMPLETE
PART NUMBER
5030210021BP
5030210023BP
5030210025BP
5030210027BP
20014BP
20016BP
20018BP
200110BP
O Ring
A
D
Swivel Joint
SIZE
Inch
4"
6"
8"
10"
100
150
200
250
DIMENSIONS (mm)
A
B
C
250
127
15
290
127
15
350
127
15
410
127
15
D
220
260
320
370
www.mchc.ie
180
100
150
200
250
A
250
290
350
410
C
15
15
15
15
PART NUMBER
20024BP
20026BP
20028BP
200210BP
Rain Guns
150
200
A
177
228
B
230
280
C
135
150
PART NUMBER
5060010004BP
5060010002BP
www.mchc.ie
181
PART NUMBER
162174
214226
SC003
NO. OF
LINKS
15
LINK
SIZE
1/2"
TO SUIT
MODEL
SPR 250
PART NUMBER
SC003
SC010
SC011
SC022
LINK
SIZE
3/8"
3/8"
1/2"
1/2"
TO SUIT
MODEL
SPR 100
SPR 150
Fleming spreader
SPR 250
PART NUMBER
SC010
SC011
SC022
SC012
SC012
SC016
SC013
TO SUIT
MODEL
SPR 100 / 150
SPR 250
TYPE
SC013
SC016
Fraser head
TO SUIT
MODEL
-
PART NUMBER
SC027
SC015
Flail Plates
SC014
PLATE
SIZE
4" x 2 1/2"
4" x 4"
TO SUIT
MODEL
SPR 100 / 150
SPR 250
PART NUMBER
SC014
SC015
Fixing Set
DESCRIPTION
7/16" x 2" Bolt and lock nut
TO SUIT MODEL
SPR 100 / 150 / 250
PART NUMBER
SC019
TO SUIT MODEL
SPR 100 / 150 / 250
PART NUMBER
SC018
www.mchc.ie
182
Tillage
Contents
Tillage
Subsoiler, Plough, Cultivation, Power Harrow, Seed Drill, Rotavation, Root Crop
Subsoiler
184 - 186
Plough
187 - 204
Agrolux
187 - 190
Gregoire-Besson
190
Kverneland
191 - 197
Lemken
198 - 199
Massey Ferguson
200
verum
200 - 203
Universal
204
Cultivation
205 - 214
Amazone
205
Brown
206
Farm Force
206
Germinator
207
KKK
207 - 208
Kongskilde
208
Kverneland
208
Lemken
209
Massey Ferguson
209
Multiplex
209
Nicholson
210
Ransome
210
Rekord
210
Vaderstad
211
Universal
211 - 214
Power Harrow
215 - 225
Disc Harrow
226 - 227
Seed Drill
228 - 231
232 - 238
239
240 - 241
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
www.mchc.ie
183
Tillage
Subsoiler
1400341
CP140058
Level Lift
DESCRIPTION
Leg
Point standard
Point roman nose
Shin
Fixing for point & shin
(Roll pin 10 x 40mm)
Wing LH
Wing RH
Bolt & nut to suit wing
1400595
1401524
1400524
OEM
NUMBER
-
PART NUMBER
CP140058
1401524
1400524
1400341
10X40
1400594
1400595
H403
OEM
NUMBER
-
PART NUMBER
645000044
M1665DIN931
M16DIN985
1400594
1065276
1065248
Fits Models:
DESCRIPTION
1065327
1065782
Top plate
Leg
Standard point
Long point
Shin
Shin strap
24" Shakerator
OEM
NUMBER
-
PART
NUMBER
1065276
1065327
1065920
1065430
1065782
1065248
1065920
1065430
www.mchc.ie
184
Tillage
Subsoiler
05067
DESCRIPTION
05071
Leg straight top 37" x 8" x 1"
Leg angled top 37" x 8" x 1"
Cutter 33" - heat treated
Shoe - 4 hole
Point
Bolt to fit point (2 required)
Wing kit (includes LH & RH wing
and fitting bolts)
Wing RH (wing only, no bolts)
Wing LH (wing only, no bolts)
Fitting bolt for 05084 / 05085 wings
3" Mole - 4 hole
4" Expander
Expander tow bar & chain
16" Plain disc
05084
OEM
NUMBER
PBA0208
PBA2233
DR1603
PASC291
DR11162
-
PART
NUMBER
05067
05099
05071
05068
05052
M1650DIN933
05083
PASC019A
PASC799
-
05084
05085
H401
05076
05078
05075
04024
04024
05083
05052
05068
05085
05078
05075
05076
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
185
Tillage
Subsoiler
SW159
SW164
SW352
Trio
DESCRIPTION
SW166
SW165
Point
Weld-on tip
Shin
Wing RH
Wing LH
Bolt & nut to suit wing
Disc
OEM
NUMBER
-
PART
NUMBER
SW352
SW166
SW159
SW164
SW165
H285
HD510031
HD510031
G1436P00B
G1410P00B
F060P30B
DESCRIPTION
G1414P01B
G1425P01B
G1411P00B
G1414P02B
Point
Shin Lower
Shin Upper
Fixing for point & shins
(Roll pin 10 x 40)
Shearbolt M20 x 120 (5.6)
Shearbolt M16 x 90 (8.8)
2 Bolt Wing RH
2 Bolt Wing LH
3 Bolt Wing RH
3 Bolt Wing LH
Fixing for wings
(Bolt 40 x 12mm - 2 Nib head)
OEM
NUMBER
-
PART
NUMBER
G1412P00B
G1411P00B
G1410P00B
10X40
F060P30B
G1436P00B
G1425P01B
G1425P02B
G1414P01B
G1414P02B
H285
G1412P00B
G1425P02B
www.mchc.ie
186
Tillage
Plough - Agrolux
To suit Agrolux AX Ploughbody
Mouldboards, Shins & Accessories
96064
96065
74922
80559
94624
94625
DESCRIPTION
Mouldboard extension RH
Mouldboard extension LH
Turbo-Trashboard RH
Turbo-Trashboard LH
Fittings for trashboard RH
Fittings for trashboard LH
Mouldboard RH
94594
94595
94596
94597
Mouldboard LH
Shin RH
Shin LH
BOLTS
H285 x2
H285 x2
H284 x2
H284 x2
H285 x2
H285 x2
H283 x6
H285 x2
H283 x6
H285 x2
H283 x2
H283 x2
PART NO.
74922
80559
96064
96065
94624
94625
BOLTS
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
PART NO.
94598
94599
94600
94601
94602
94603
94610
94611
94608
94609
94612
94613
BOLTS
H284 x1
M20X75 x1
H284 x1
M20X75 x1
PART NO.
94594
94595
94596
94597
94610
94611
94600
94601
94602
94603
94612
94613
94608
94609
DESCRIPTION
Wings 14" RH
Wings 14" LH
Wings 16" RH
Wings 16" LH
Wings 18" RH
Wings 18" LH
Point straight RH
Point straight LH
Point reversible RH
Point reversible LH
Bracket RH
Bracket LH
Landslide RH
Landslide LH
94606
94607
www.mchc.ie
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
187
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
Tillage
Plough - Agrolux
To suit Agrolux AH Ploughbody
Mouldboards, Shins & Accessories
20249
20894
20250
20895
20251
20896
20252
20897
21470
21599
DESCRIPTION
Mouldboard strip top RH
Mouldboard strip top LH
Mouldboard strip 2nd RH
Mouldboard strip 2nd LH
Mouldboard strip 3rd RH
Mouldboard strip 3rd LH
Mouldboard strip 4th RH
Mouldboard strip 4th LH
Shin RH
Shin LH
BOLTS
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
PART NO.
20249
20894
20250
20895
20251
20896
20252
20897
21470
21599
BOLTS
H283 x2
H283 x2
H283 x2
H283 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
PART NO.
96090
96091
96092
96093
94610
94611
94612
94613
94608
94609
BOLTS
H284 x2
H284 x2
H37 x2
H37 x2
PART NO.
96094
96095
94622
94623
94610
94611
96092
96093
94612
94613
94608
94609
DESCRIPTION
Wing 16" RH
Wing 16" LH
Wing 18" RH
Wing 18" LH
Point straight RH
Point straight LH
Bracket RH
Bracket LH
Point reversible RH
Point reversible LH
96094
96095
DESCRIPTION
Landslide RH
Landslide LH
Landslide knife RH
Landslide knife LH
www.mchc.ie
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
188
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
Tillage
Plough - Agrolux
To suit Agrolux KH Ploughbody
Shares & Points
95000683
95000675
DESCRIPTION
Wings 14" RH
Point RH
BOLTS
H224UNF x2
H224UNF x2
PART NO.
95000683
95000675
BOLTS
H35 x2
H90 x1
PART NO.
BOLTS
H224UNF x2
PART NO.
95002505
BOLTS
H224UNF x2
PART NO.
95002490
Landslides
DESCRIPTION
Landslide, short RH
95001172
95001172
Shins
95002505
DESCRIPTION
Shin RH
DESCRIPTION
Point RH
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
189
Tillage
DESCRIPTION
Skim mouldboard RH
Skim mouldboard LH
Skim share RH
Skim share LH
91801
91802
BOLTS
H283 x2
H283 x2
H283 x2
H283 x2
PART NO.
91803
91804
91801
91802
Disc Coulters
DESCRIPTION
Disc coulter, 18" RH & LH
Disc coulter, 20" RH & LH
Disc coulter, 18" RH & LH
72547
PART NO.
72547
80662
95000837
95000837
50602
50603
80966
80967
81076
81076-2
DESCRIPTION
Hub complete RH
Hub complete LH
Cap only
Hub only
Axle only RH
Axle only LH
Oil seal
Needle bearing
O' Ring
Hub bearing kit
PART NO.
50602
50603
80966
80967
81076
81076-2
35527
HK3520
37950OR
BK031
173332
173331
013234Z x2
013234Z x2
PART NO.
173332
173331
H283 x2
H283 x2
PART NO.
19114
19113
Skim Shares
DESCRIPTION
Skim shares RH
Skim shares LH
19114
19113
www.mchc.ie
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
190
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
Tillage
Plough - Kverneland
To suit Kverneland Ploughbodies in the 53 - series
53262
DESCRIPTION
Mouldboard extension RH
Mouldboard 14" RH
BOLTS
H285 x2
H36 x2
PART NO.
53387
53262
53090
53087
73091
DESCRIPTION
Share for rev. point 12" RH
Share for rev. point 14" RH
Reversible point RH
Share knife RH
BOLTS
13228 x3
13228 x4
13228 x2
013234Z x2
PART NO.
53085
53087
53090
73091
BOLTS
H35 x1
H44 x2
PART NO.
Landslides
DESCRIPTION
53684
Landslide, short RH
53684
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
191
Tillage
Plough - Kverneland
To suit Kverneland Ploughbody No. 3
Mouldboards, Shins & Accessories
7363300
7363301
53387
63388
7363310
7363311
DESCRIPTION
Mouldboard extension RH
Mouldboard extension LH
Turbo-Trashboard RH
Turbo-Trashboard LH
Fittings for trashboard RH
Fittings for trashboard LH
Mouldboard RH
63240
63250
63283
63293
Mouldboard LH
Shin RH
Shin LH
BOLTS
H285 x2
H285 x2
H284 x2
H284 x2
H284 x2
H284 x2
H283 x8
H284 x2
H283 x8
H284 x2
H283 x2
H283 x2
PART NO.
53387
63388
7363300
7363301
7363310
7363311
63283
63293
63240
63250
73091
73092
DESCRIPTION
Euroshare 14" RH
Euroshare 14" LH
Reversible point RH
Reversible point LH
Share knife RH
Share knife LH
BOLTS
13228 x4
13228 x4
13228 x2
13228 x2
013234Z x2
013234Z x2
PART NO.
63014
63017
53090
63090
73091
73092
BOLTS
H35 x1
H44 x2
031980Z x1
013234Z x1
M16X50 x1
013234Z x1
M16X85 x1
013234Z x1
M16X50 x1
013234Z x1
M16X85 x1
PART NO.
Landslides
DESCRIPTION
Landslide, short RH
63602
63607
Conversion plate RH
Landslide, short, low LH
63606
63605
63603
63604
63602
63607
63606
63605
63604
63603
www.mchc.ie
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
192
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
Tillage
Plough - Kverneland
To suit Kverneland Ploughbody No. 6, 7, 8 & 9
Mouldboards, Shins & Accessories
53387
63388
7363300
7363301
73290
73291
7363310
7363311
DESCRIPTION
Mouldboard extension RH
Mouldboard extension LH
Turbo-Trashboard RH
Turbo-Trashboard LH
Fittings for trashboard RH
Fittings for trashboard LH
Mouldboard RH (No. 9)
73286
73287
Mouldboard LH (No. 9)
73250
73251
73256
73257
Mouldboard RH (No. 8)
Mouldboard LH (No. 8)
Shin RH (No. 9)
Shin LH (No. 9)
Shin RH (No. 8)
Shin LH (No. 8)
Frog RH (No. 8)
Frog LH (No. 8)
73411
73412
BOLTS
H285 x2
H285 x2
H284 x2
H284 x2
H284 x2
H284 x2
H283 x9
H284 x2
H283 x9
H284 x2
H283 x8
H284 x2
H283 x8
H284 x2
H283 x2
H283 x2
H283 x2
H283 x2
-
PART NO.
53387
63388
7363300
7363301
7363310
7363311
73290
73291
73286
73287
73256
73257
73250
73251
73411
73412
53090
63090
73609
73609
73608
73091
73092
DESCRIPTION
Euroshare 14" RH (No. 8)
Euroshare 14" LH (No. 8)
Euroshare 16" RH (No. 8)
Euroshare 16" LH (No. 8)
Reversible point RH
Reversible point LH
Share knife RH
Share knife LH
BOLTS
13332 x4
13332 x4
13332 x4
13332 x4
13228 x2
13228 x2
013234Z x2
013234Z x2
PART NO.
73002
73003
73004
73005
53090
63090
73091
73092
BOLTS
13332 x2
13332 x2
PART NO.
73608
73609
Landslides
DESCRIPTION
Landslide RH & LH (No. 8)
Landslide RH & LH (No. 8)
www.mchc.ie
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
193
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
Tillage
Plough - Kverneland
To suit Kverneland Ploughbody No. 29
83212
83222
83213
83223
7363310
7363311
83214
83224
83211
83221
73256
73257
DESCRIPTION
Turbo-Trashboard RH
Turbo-Trashboard LH
Fittings for trashboard RH
Fittings for trashboard LH
Mouldboard strip top RH
Mouldboard strip top LH
Mouldboard strip 2nd RH
Mouldboard strip 2nd LH
Mouldboard strip 3rd RH
Mouldboard strip 3rd LH
Mouldboard strip 4th RH
Mouldboard strip 4th LH
Shin RH
Shin LH
BOLTS
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H283 x2
H283 x2
PART NO.
7363300
7363301
7363310
7363311
83214
83224
83213
83223
83212
83222
83211
83221
73256
73257
53090
63090
73609
73609
73608
73091
73092
DESCRIPTION
Euroshare 14" RH
Euroshare 14" LH
Euroshare 16" RH
Euroshare 16" LH
Reversible point RH
Reversible point LH
Share knife RH
Share knife LH
BOLTS
13332 x4
13332 x4
13332 x4
13332 x4
13228 x2
13228 x2
013234Z x2
013234Z x2
PART NO.
73002
73003
73004
73005
53090
63090
73091
73092
BOLTS
13228 x2
13228 x2
PART NO.
73608
73609
Landslides
DESCRIPTION
Landslide short RH & LH
Landslide long RH & LH
www.mchc.ie
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
194
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
Tillage
Plough - Kverneland
To suit Kverneland Ploughbody No. 30
83212
83222
83213
83223
7363310
7363311
83214
83224
83211
83221
73230
73231
DESCRIPTION
Turbo-Trashboard RH
Turbo-Trashboard LH
Fittings for trashboard RH
Fittings for trashboard LH
Mouldboard strip top RH
Mouldboard strip top LH
Mouldboard strip 2nd RH
Mouldboard strip 2nd LH
Mouldboard strip 3rd RH
Mouldboard strip 3rd LH
Mouldboard strip 4th RH
Mouldboard strip 4th LH
Shin RH
Shin LH
BOLTS
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H283 x2
H283 x2
PART NO.
7363300
7363301
7363310
7363311
83214
83224
83213
83223
83212
83222
83211
83221
73230
73231
53090
63090
73609
73609
73608
73091
73092
DESCRIPTION
Euroshare 14" RH
Euroshare 14" LH
Euroshare 16" RH
Euroshare 16" LH
Reversible point RH
Reversible point LH
Share knife RH
Share knife LH
BOLTS
13332 x4
13332 x4
13332 x4
13332 x4
13228 x2
13228 x2
013234Z x2
013234Z x2
PART NO.
73054
73055
73056
73057
53090
63090
73091
73092
BOLTS
13332 x2
13332 x2
PART NO.
73608
73609
Landslides
DESCRIPTION
Landslide short RH & LH
Landslide long RH & LH
www.mchc.ie
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
195
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
Tillage
Plough - Kverneland
To suit Kverneland Ploughs
Skim Shares & Skim Mouldboards
66878
66880
66881
56873
66873
66868
66869
56852
6686869
DESCRIPTION
Skim mouldboard RH
Skim mouldboard RH
Skim mouldboard LH
Skim share, short RH
Skim share, short LH
Skim share, long RH
Skim share, long LH
Skim share, long RH
Skim share, RH & LH
BOLTS
H280 x2
H280 x2
H280 x2
H176 x2
H176 x2
H280 x2
H280 x2
H176 x2
H176 x2
PART NO.
66878
66880
66881
56873
66873
66868
66869
56852
6686869
57067
57068
57089
57066
57065
57089
57064
57063
Leaf Springs
DESCRIPTION
Master leaf
Leaf No. 1
Leaf No. 2
Leaf No. 3
Leaf No. 4
Leaf No. 5
Pin
Spring complete, includes leaf 1-4
Heavy duty spring complete, includes leaf 1-5
www.mchc.ie
196
PART NUMBER
57063
57064
57065
57066
57067
57068
57089
50706
60703
Tillage
Plough - Kverneland
Disc Parts to suit Kverneland Ploughs
76406
56002
10760
DESCRIPTION
Disc coulter, 18" RH & LH
Disc coulter, 18"- 4 hole RH & LH
Stem for disc coulter
E' Type circlip to suit stem
PART NUMBER
56112
76406
56002
10760
60609
56156
66102
66110
DESCRIPTION
Hub assembly - less cap
O' Ring
Bolt
Cap
Hub
Shaft
Oil seal
Needle bearing
Hub bearing kit c/w seal
PART NUMBER
60609
35450OR
31335
56156
66102
66110
30407
HK3026
BK030
60624
56156
66102
66108
DESCRIPTION
Hub assembly - less cap
Hub assembly - complete with 56156 cap
O' Ring
Washer
Bolt
Cap
Hub
Shaft
Oil seal
Needle bearing
Hub bearing kit c/w seal
PART NUMBER
60624
60624KIT
35450OR
11290
31335
56156
66102
66108
30407
HK3026
BK030
www.mchc.ie
76499
86101
DESCRIPTION
Hub (c/w small O' Ring) ID: 35mm
Hub (c/w small O' Ring) ID: 30mm
Plate
Small O' Ring to suit hub
Large O' Ring to suit hub
Shaft c/w bush
Circlip
Ball bearing
Hub bearing kit c/w seal
197
PART NUMBER
76403
86100
76499
366OR
11750
86101
HUIS62
32062RSE
BK032
Tillage
Plough - Lemken
To suit Lemken BS 40 Ploughbody
3444030
3444031
3444020
3444021
3444010
3444011
DESCRIPTION
Mouldboard strip top RH
Mouldboard strip top LH
Mouldboard strip 2nd RH
Mouldboard strip 2nd LH
Mouldboard strip 3rd RH
Mouldboard strip 3rd LH
Mouldboard strip 4th RH
Mouldboard strip 4th LH
Shin RH - 10 mm
Shin LH - 10 mm
Shin RH - 8 mm
Shin LH - 8 mm
3444040
3444041
3451002
3451003
3451010
3451011
BOLTS
H176 x4
H176 x4
H176 x2
H176 x2
H176 x2
H176 x2
H176 x2
H176 x2
H176 x3
H176 x3
H176 x3
H176 x3
PART NO.
3444010
3444011
3444020
3444021
3444030
3444031
3444040
3444041
3451002
3451003
3451010
3451011
BOLTS
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
PART NO.
3352030
3352031
3352130
3352131
3364050
3364051
3364150HF
3364151HF
3365540
3365541
3364050
3364051
3352130
3352131
3364150HF
3364151HF
3365540
3365541
DESCRIPTION
Wing 18" RH
Wing 18" LH
Wing 18" - 11mm RH
Wing 18" - 11mm LH
Point RH
Point LH
Point RH - hard face
Point LH - hard face
Reversible point RH
Reversible point LH
3401900AK10
3401901AK10
3411504
3401480
3401481
DESCRIPTION
Landslide, long RH & LH
Landslide front RH
Landslide front LH
Frog protector RH
Frog protector LH
BOLTS
H401 x2
H176 x2
H176 x2
-
PART NO.
3411504
3401900AK10
3401901AK10
3401480
3401481
www.mchc.ie
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
198
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
Tillage
Plough - Lemken
To suit Lemken C40 Ploughbody
DESCRIPTION
Mouldboard extension RH
3441140
3441141
Mouldboard extension LH
Mouldboard RH
Mouldboard LH
Shin RH
Shin LH
3451004
3451005
BOLTS
H25 x1
H160 x1
H25 x1
H160 x1
H176 x7
H176 x7
H176 x3
H176 x3
PART NO.
BOLTS
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
H401 x2
PART NO.
3352010
3352011
3352020
3352021
3364050
3364051
3364150HF
3364151HF
3365540
3365541
3476000
3476001
3441140
3441141
3451004
3451005
3352010
3352011
3352020
3352021
3364050
3364051
3364150HF
3364151HF
3365540
3365541
DESCRIPTION
Wing 14" RH
Wing 14" LH
Wing 16" RH
Wing 16" LH
Point RH
Point LH
Point RH - hard face
Point LH - hard face
Reversible point RH
Reversible point LH
3401900AK10
3401901AK10
3411504
3401480
3401481
DESCRIPTION
Landslide, long RH & LH
Landslide front RH
Landslide front LH
Frog protector RH
Frog protector LH
BOLTS
H401 x2
H176 x2
H176 x2
-
PART NO.
3411504
3401900AK10
3401901AK10
3401480
3401481
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
63601A
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
www.mchc.ie
DESCRIPTION
Skim mouldboard RH
Skim mouldboard LH
Skim share RH
Skim share LH
Disc coulter, plain 500mm
199
BOLTS
H176 x2
H176 x2
H176 x2
H176 x2
-
PART NO.
3470650
3470651
3363710
3363711
3490029
Tillage
Coulter Disc
DESCRIPTION
16" Plain disc, 3 hole
OEM NO.
815731 M1
PART NO.
04002
04002
74922
BOLTS
H285 x2
H280 x3
H283 x4
H38 x2
PART NO.
74922
74868
(80604)
80609
80609
74868
(80604)
74606
DESCRIPTION
Wing 14" RH
Point, steel casting RH
BOLTS
H224UNF x2
-
PART NO.
74606
74601
BOLTS
H289 x1
PART NO.
84239
Landslides
DESCRIPTION
Landslide, short RH
84239
www.mchc.ie
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
200
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
Tillage
Plough - verum
To suit verum XL Ploughbody
Mouldboards, Shins & Accessories
96064
96065
74922
80559
94624
94625
DESCRIPTION
Mouldboard extension RH
Mouldboard extension LH
Turbo-Trashboard RH
Turbo-Trashboard LH
Fittings for trashboard RH
Fittings for trashboard LH
Mouldboard RH
94594
94595
94596
94596
Mouldboard LH
Shin RH
Shin LH
BOLTS
H285 x2
H285 x2
H284 x2
H284 x2
H285 x2
H285 x2
H283 x6
H285 x2
H283 x6
H285 x2
H283 x2
H283 x2
PART NO.
74922
80559
96064
96065
94624
94625
BOLTS
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
PART NO.
94598
94599
94600
94601
94602
94603
94610
94611
94608
94609
94612
94613
BOLTS
H284 x1
M20X75 x1
H284 x1
M20X75 x1
H37 x2
H37 x2
PART NO.
94594
94595
94596
94597
94610
94611
94600
94601
94602
94603
94612
94613
94608
94609
DESCRIPTION
Wings 14" RH
Wings 14" LH
Wings 16" RH
Wings 16" LH
Wings 18" RH
Wings 18" LH
Point straight RH
Point straight LH
Point reversible RH
Point reversible LH
Bracket RH
Bracket LH
Landslide RH
Landslide LH
Landslide knife RH
Landslide knife LH
94606
94607
94622
94623
www.mchc.ie
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
201
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
Tillage
Plough - verum
To suit verum XS Ploughbody
Mouldboards, Shins & Accessories
20249
20894
20250
20895
20251
20896
20252
20897
21470
21599
DESCRIPTION
Mouldboard strip top RH
Mouldboard strip top LH
Mouldboard strip 2nd RH
Mouldboard strip 2nd LH
Mouldboard strip 3rd RH
Mouldboard strip 3rd LH
Mouldboard strip 4th RH
Mouldboard strip 4th LH
Shin RH
Shin LH
BOLTS
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
PART NO.
20249
20894
20250
20895
20251
20896
20252
20897
21470
21599
94610
94611
96092
96093
94612
94613
94608
94609
DESCRIPTION
Wing 16" RH
Wing 16" LH
Wing 18" RH
Wing 18" LH
Point straight RH
Point straight LH
Point reversible RH
Point reversible LH
Bracket RH
Bracket LH
BOLTS
H283 x2
H283 x2
H283 x2
H283 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
H284 x2
PART NO.
96090
96091
96092
96093
94610
94611
94608
94609
94612
94613
BOLTS
H284 x2
H284 x2
H37 x2
H37 x2
PART NO.
96094
96095
94622
94623
96094
96095
DESCRIPTION
Landslide RH
Landslide LH
Landslide knife RH
Landslide knife LH
63601A
DESCRIPTION
Wearing plate, rev RH & LH
Wearing plate, rev RH & LH
BOLTS
13228 x2
13228 x2
PART NO.
63600
63601A
PART NO.
72635
72635
www.mchc.ie
202
Tillage
Plough - verum
To suit verum Ploughs
Skim Shares & Skim Mouldboards
DESCRIPTION
Skim share RH
Skim mouldboard RH
Skim mouldboard LH
Skim share RH
Skim share LH
91803
91804
81519
91801
91802
BOLTS
H283 x2
H283 x2
H283 x2
H283 x2
H283 x2
PART NO.
81519
91803
91804
91801
91802
Disc Coulters
DESCRIPTION
Disc coulter, 18" RH & LH
Disc coulter, 20" RH & LH
Disc coulter, 18" RH & LH
72547
PART NO.
72547
80662
95000837
95000837
50601
73242
72342
DESCRIPTION
Hub assembly
Hub only
Axle
Oil seal
O' Ring
PART NO.
50601
73242
72342
35507
37950OR
50602
50603
80966
80967
81076
81076-2
DESCRIPTION
RH Hub assembly
LH Hub assembly
Bolt to suit 50602 & 50603
RH & LH Hub only
Cap
Axle RH
Axle LH
Oil seal
Needle bearing
Hub bearing kit c/w seal
O' Ring
PART NO.
50602
50603
M1030DIN933
80967
80966
81076
81076-2
35527
HK3520
BK031
36450OR
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
203
Tillage
Plough - Universal
Lower Link Balls
Ball Guide Cone - Economy Range
TYPE
ID
OD
PIN HOLE
CAT 2
CAT 3/2
CAT 3
CAT 3
28.7
28.7
37.3
37.3
56
64
64
64
12
12
15
17
GENUINE
WALTERSCHEID
099032
099035
099034
099033
ECONOMY
RANGE
LA956222Z
LA964232Z
LA964233Z
LA964733Z
GENUINE
WALTERSCHEID
305051
308800
309246
308801
ECONOMY
RANGE
LA944224Z
LA956284Z
LA964284Z
LA964370Z
www.mchc.ie
TYPE
ID
OD
WIDTH
CAT 1
CAT 2
CAT 3/2
CAT 3
22.4
28.7
28.7
37.3
44
56
64
64
35
45
45
45
204
Tillage
Cultivation - Amazone
3374395
3374399
3374416
3374388
3374417
Pegasus
DESCRIPTION
Point 10mm (XL018)
LH Wing 10mm (XL020)
RH Wing 10mm (XL019)
Centre shin (XL015)
LH Shin (XL017)
RH Shin (XL016)
Plain disc 460mm, 110mm hub
XL011
PART NUMBER
3374388
3374417
3374416
3374395
3374399
3374398
XL011
Right Hand
Shown
Centaur
DESCRIPTION
RH Leg to suit Amazone
LH Leg to suit Amazone
PARTS TO SUIT
17
OEM NUMBER
OEM NUMBER
PART NUMBER
HC117
HC118
PART NUMBER
Point 370 x 55
HC119
HC120
Reversible point
440 x 120
HC127
HC121
HC122
635
75
RH Reversible
point 490 x 75
LH Reversible
point 490 x 75
400
Centaur
DESCRIPTION
Plain disc 460mm, 120mm hub
Scalloped disc 460mm, 120mm hub
Notched disc 460mm, 120mm hub
XL041
XL043
PART NUMBER
XL041
XL043
XL044
XL044
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
205
Tillage
OEM NUMBER
PB11
OEM NUMBER
PART NUMBER
05030
PART NUMBER
H738
OEM NUMBER
CA24989
OEM NUMBER
PART NUMBER
04111
PART NUMBER
7/16" x 1 3/8"
Bolt c/w nut
to suit point
H35UK
7/16 x 1 1/2
Bolt c/w nut
to suit point
H36UK
OEM NUMBER
YD916
OEM NUMBER
PART NUMBER
04112
PART NUMBER
H401
OEM NUMBER
OEM NUMBER
PART NUMBER
101507014
PART NUMBER
215001081
10 x 45mm
Bolt c/w nut
to suit point
05022
112 x 97mm
packer plate
26100667
OEM NUMBER
-
PART NUMBER
210331101
12 x 50mm
Bolt c/w nut
to suit point
Width:
45mm
570
430
185 x 70
11
DESCRIPTION
Point to suit levelling tine
www.mchc.ie
206
Tillage
OEM NUMBER
OEM NUMBER
PART NUMBER
05012
PART NUMBER
Point to suit
05093
10 x 30mm
Bolt c/w nut
to suit point
05019
Clip to suit
mini tine for
40x10mm beam
05079
Clip to suit
mini tine for
40x40mm beam
05087
M1055DIN933
M10DIN985
OEM NUMBER
OEM NUMBER
PART NUMBER
05015
PART NUMBER
Point to suit
05016
10 x 40mm
Bolt c/w nut to
suit point
05019
Clip to suit
mini tine for
50 x 12mm beam
05017
M1240DIN933
M12DIN985
390
285
550
385
Bolt to suit
05017 clip
Nut to suit
05017 clip
www.mchc.ie
207
PART NUMBER
05013
Tillage
530
OEM NUMBER
OEM NUMBER
PART NUMBER
05080
PART NUMBER
Point to suit
05081
10 x 40mm
Bolt c/w nut
to suit point
05019
Clip to suit
mini tine for
50 x 12mm beam
05017
M1240DIN933
M12DIN985
OEM NUMBER
5000504
05000514
OEM NUMBER
PART NUMBER
105000504
105000514
PART NUMBER
01044
390
Bolt to suit
05017 clip
Nut to suit
05017 clip
103011
M10 x 39mm
Bolt c/w nut to suit point
05025
www.mchc.ie
208
PART NUMBER
103011
05025
PART NUMBER
103015
Tillage
3374490
3374462
3374482
3374441
3374484
3374442
3374491
3374443
Torit Karat
DESCRIPTION
Shin RH 320 x 100
Shin LH 320 x 100
Shin 305 x 80
Shin 305 x 100
Wing RH
Wing LH
Point 260 x 80, Thickness 14
Point 290 x 120, Thickness 10
Point 285 x 120, Thickness 12
PART NUMBER
3374490
3374491
3374482
3374484
3374462
3374463
3374441
3374442
3374443
3374463
3374418
3374398
3374395
3374399
3374416
3374388
3374417
3374419
Terra Disc
DESCRIPTION
Guide board outer RH
Guide board centre
Guide board outer LH
Wing 10mm RH
Wing 10mm LH
Wing, curved 10mm RH
Wing, curved 10mm LH
Point 10mm
PART NUMBER
3374398
3374395
3374399
3374416
3374417
3374418
3374419
3374388
OEM NUMBER
646746M2
OEM NUMBER
PART NUMBER
05005
PART NUMBER
H38UK
OEM NUMBER
OEM NUMBER
PART NUMBER
05035
PART NUMBER
M825DIN603
www.mchc.ie
209
Tillage
OEM NUMBER
BT048
PART NUMBER
05023
OEM NUMBER
PSF0133A
OEM NUMBER
PART NUMBER
05007
PART NUMBER
05061
OEM NUMBER
OEM NUMBER
PART NUMBER
05055
PART NUMBER
Mini point
05056
8 x 30mm
Bolt c/w nut
to suit point
05058
Clip to suit
mini tine
05057
M1040DIN933
M10DIN985
360
260
DESCRIPTION
Double tine c/w point to suit Rekord
OEM NUMBER
-
PART NUMBER
07002
240
www.mchc.ie
210
Tillage
365
535
OEM NUMBER
OEM NUMBER
PART NUMBER
201470
PART NUMBER
Point to suit
05016
10 x 40mm
Bolt c/w nut to
suit point
05019
05013
SIDE
Right hand
Left hand
Right hand
Left hand
PART NUMBER
05039A
05039B
05034A
05034B
OEM NUMBER
OEM NUMBER
PART NUMBER
05033
05069
05032
05031
PART NUMBER
H40UK
Right Hand
Shown
Hole Size
468
25 x 25mm
to suit 7/16" bolt
DESCRIPTION
Double coil pigtail tine
Double coil pigtail tine
Double coil pigtail tine
Double coil pigtail tine
60
390
1 1/2"
2"
2 1/2"
Universal Points
DESCRIPTION
1 1/2" Universal double coil point
2" Universal double coil point
2 1/2" Universal double coil point
3" Universal double coil point
PARTS TO SUIT
7/16" x 2 3/8"
Bolt c/w nut
to suit point
3"
www.mchc.ie
211
Tillage
Cultivation - Universal
Universal Cultivation Share
DESCRIPTION
7" Heavy duty cultivation share
PARTS TO SUIT
7/16" x 2 3/8"
Bolt c/w nut
to suit point
OEM NUMBER
OEM NUMBER
PART NUMBER
05077
PART NUMBER
H40UK
EDGE
DIA.
THICKNESS
HUB
SIZE
BOLT
HOLES
BOLT
C to C
Plain
16"
51
9.5
62.5
Plain
16"
51
9.5
75
Plain
18"
55
10.5
70
Plain
18"
70
12.5
85
Plain
18"
80
10.9
75
Agrolux /
Overum Plough
72547
Plain
350mm
35
35
Lemken
Seed Drill
3490010
Notched
410mm
12.5
61
Vaderstad
Seed Drill
451371
12.5
(countersunk)
70
Kverneland
Plough
76406
12.5
(countersunk)
50
Lemken
Plough
3490029
Plain
Plain
www.mchc.ie
18"
500mm
212
APPLICATION
Massey
Plough
Ransome
Subsoiler
Kverneland
Plough
Agrolux /
Overum Plough
PART NUMBER
04002
04024
56112
95000837
Tillage
Cultivation - Universal
www.mchc.ie
EDGE
DIA.
THICKNESS
HUB
BOLT
SIZE
HOLES
1 3/16"
(square)
1 1/16"
1 3/16"
(dual
square)
1 3/16"
(square)
Plain
18"
Plain
18"
3.5
Plain
20"
Plain
20"
1 9/32"
Plain
460mm
Plain
460mm
Notched
APPLICATION
PART NUMBER
Kverneland
Harrow
121200
Massey /
Ransome
Harrow
05009
Kverneland
Harrow
121204
10
Parimeter
Harrow
05021
11
75
Amazone
Harrow
XL011
11
85
Amazone
Harrow
XL041
410mm
12.5
61
Vaderstad
Seed Drill
451372
Notched
450mm
12.5
69
Vaderstad
Harrow
466947
Notched
460mm
11
85
Amazone
Harrow
XL044
Scalloped
460mm
11
85
Amazone
Harrow
XL043
Scalloped
20"
1 9/32"
10
Parimeter
Harrow
05094
Scalloped
22"
4.5
1 9/32"
10
Parimeter
Harrow
05018
213
BOLT
C to C
Tillage
Cultivation - Universal
www.mchc.ie
EDGE
DIA.
THICKNESS
HUB
SIZE
BOLT
HOLES
BOLT
C to C
Scalloped
465mm
10.5
Scalloped
620mm
Scalloped
620mm
213a
APPLICATION
PART NUMBER
50
Lemken
Harrow
3490471
12.5
(square)
95
Lemken
Harrow
3490467
12.5
(square)
66
Lemken
Harrow
3490466
Tillage
Cultivation - Universal
Bolt C to C
Universal Points
Length is measured from tip to tip of the point
(on curved points it is measured around the curve)
TYPE
www.mchc.ie
Length
LENGTH
WIDTH
THICKNESS
BOLT HOLES
BOLT
C to C
PROFILE
PART NUMBER
130
35
Curved
05056
130
35
Straight
05093
200
35
Curved
05016
210
40
25
Curved
05035
215
35
Straight
05081
215
40
Straight
215001081
220
35
Curved
240
40
Curved
240
42
Curved
270
Spade
05007
280
50
40
Curved
04111
280
60
35 - 50
Curved
05005
45
Curved
105000504
346
36
45
Curved
105000514
380
75
10
75
Curved
05030
400
2"
55 - 65
Curved
05069
410
1 1/2"
10
55 - 65
Curved
05033
410
2 1/2"
10
55 - 65
Curved
05032
410
3"
10
55 - 65
Curved
05031
470
55
15
40 - 80
Curved
04112
165
Hoe blade
05023
214
05013
(box of 25 c/w
Bolts & Nuts)
103011
(box of 25 c/w
Bolts & Nuts)
05025
(box of 25 c/w
Bolts & Nuts)
Tillage
Power Harrow
(Pin) Power Harrow Tine to suit Amazone
Right Hand
Shown
To suit models:
SIDE
KG Cultimix
HEIGHT
Right hand
350
350
Left hand
PARTS TO SUIT
WIDTH
120
120
HOLE
SIZE
19
19
HOLE
DISTANCE
-
63041300
Shown
61473
61483
PART NUMBER
0224200
Right Hand
Shown
PART NUMBER
RE Blade
HEIGHT
WIDTH
312
312
110
110
HOLE
SIZE
13
13
HOLE
DISTANCE
80 & 55.5
80 & 55.5
PART NUMBER
63041300
63051300
KG300
SIDE
HEIGHT
Right hand
330
330
Left hand
PARTS TO SUIT
WIDTH
120
120
HOLE
SIZE
19.25
19.25
THICKNESS
PART NUMBER
15
15
967495
967496
PART NUMBER
0224200
To suit models:
SIDE
KE 15mm
HEIGHT
Right hand
300
Left hand
300
PARTS TO SUIT
WIDTH
150
150
HOLE
SIZE
19
19
THICKNESS
PART NUMBER
15
15
950788
950789
PART NUMBER
0224200
To suit models:
KE301
SIDE
HEIGHT
Right hand
340
Left hand
340
PARTS TO SUIT
www.mchc.ie
215
WIDTH
120
120
HOLE
SIZE
17
17
HOLE
DISTANCE
75
75
PART NUMBER
6807400RH
6808400LH
PART NUMBER
01022
010039
Tillage
Power Harrow
Power Harrow Tine to suit Kverneland
Thickness:
Right Hand
Shown
SIDE
15mm
HEIGHT
Right hand
330
330
Left hand
PARTS TO SUIT
WIDTH
110
110
HOLE
SIZE
19
19
HOLE
DISTANCE
50
50
PART NUMBER
E030146
E040146
PART NUMBER
M1860960109
M1815DIN985
SIDE
18mm
HEIGHT
Right hand
330
330
Left hand
PARTS TO SUIT
Right Hand
Shown
www.mchc.ie
WIDTH
110
110
HOLE
SIZE
19
19
HOLE
DISTANCE
50
50
PART NUMBER
E030146A
E040146A
PART NUMBER
M1860960109
M1815DIN985
18mm
SIDE
HEIGHT
WIDTH
Right hand
Left hand
330mm
330mm
100mm
100mm
218
HOLE
SIZE
18mm
18mm
HOLE
DISTANCE
-
PART NUMBER
44010151
44010150
Tillage
Power Harrow
Power Harrow Tine to suit Dowdeswell
Right Hand
Shown
SIDE
HEIGHT
WIDTH
Right hand
340
Left hand
340
PARTS TO SUIT
110
110
HOLE
SIZE
17.5
17.5
HOLE
DISTANCE
76
76
PART NUMBER
820380
820381
01022
M1670960129
010039
Vector 2500
WIDTH
270
102
PARTS TO SUIT
HOLE
SIZE
16.5
HOLE
DISTANCE
60
OEM
NUMBER
P7A48010
PART NUMBER
08009
M1655960129
M1615DIN985
Vector 46
WIDTH
305
112
PARTS TO SUIT
Right Hand
Shown
HOLE
SIZE
20
HOLE
DISTANCE
60
OEM
NUMBER
P7A48011
PART NUMBER
08010
M2070960109
M2015DIN985
XXL
SIDE
HEIGHT
WIDTH
Right hand
Left hand
320
320
110
110
HOLE
SIZE
12
12
HOLE
DISTANCE
-
PART NUMBER
7U00039
7U00040
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
216
Tillage
Power Harrow
Power Harrow Tine to suit Howard
To suit models:
Right Hand
Shown
SIDE
KH30
HEIGHT
Right hand
315
315
Left hand
PARTS TO SUIT
WIDTH
100
100
HOLE
SIZE
16.5
16.5
HOLE
DISTANCE
60
60
PART NUMBER
185505
185506
PART NUMBER
M1670960129
010039
SIDE
Right hand
315
315
Left hand
PARTS TO SUIT
WIDTH
120
120
HOLE
SIZE
19.25
19.25
HOLE
DISTANCE
-
Right Hand
Shown
PART NUMBER
2500100HT
2500090HT
PART NUMBER
52532120
3001/2
SIDE
HEIGHT
WIDTH
Right hand
Left hand
318
318
110
110
HOLE
SIZE
19.5
19.5
HOLE
DISTANCE
-
PART NUMBER
HOLE
DISTANCE
68.5
68.5
PART NUMBER
52596400
52596500
Right Hand
Shown
To suit models:
1001/2
SIDE
HEIGHT
Right hand
Left hand
300
300
WIDTH
HOLE
SIZE
110
17.5
110
17.5
PARTS TO SUIT
www.mchc.ie
217
52539400
52539500
52532120
01022
010039
Tillage
Power Harrow
Power Harrow Tine to suit Kuhn
To suit models:
Right Hand
Shown
SIDE
Vector 2500
HEIGHT
WIDTH
Right hand
270
Left hand
270
PARTS TO SUIT
110
110
HOLE
SIZE
16.5
16.5
HOLE
DISTANCE
68
68
PART NUMBER
52549400
52549500
M1655960129
M1615DIN985
HR1000
SIDE
HEIGHT
RH & LH
320
WIDTH
HOLE
SIZE
40
17
PARTS TO SUIT
HOLE
DISTANCE
-
PART NUMBER
52503700
01022
010039
SERIES
W2500
www.mchc.ie
ENDS
1 3/8" 6 spline Yoke /
1 3/4" 21 spline K64 clutch
220 daNm
TO SUIT MODELS
APPLICATION
PART NUMBER
Various
W25710831006422R220
217a
Tillage
Power Harrow
Power Harrow Tine to suit Kverneland
Thickness:
Right Hand
Shown
SIDE
15mm
HEIGHT
Right hand
330
330
Left hand
PARTS TO SUIT
WIDTH
110
110
HOLE
SIZE
19
19
HOLE
DISTANCE
50
50
PART NUMBER
E030146
E040146
PART NUMBER
M1860960109
M1815DIN985
SIDE
18mm
HEIGHT
Right hand
330
330
Left hand
PARTS TO SUIT
Right Hand
Shown
www.mchc.ie
WIDTH
110
110
HOLE
SIZE
19
19
HOLE
DISTANCE
50
50
PART NUMBER
E030146A
E040146A
PART NUMBER
M1860960109
M1815DIN985
18mm
SIDE
HEIGHT
WIDTH
Right hand
Left hand
330mm
330mm
100mm
100mm
218
HOLE
SIZE
18mm
18mm
HOLE
DISTANCE
-
PART NUMBER
44010151
44010150
Tillage
Power Harrow
Old Type Tine to suit Lely
To suit models:
Rottera
HEIGHT
WIDTH
335
PARTS TO SUIT
34
THREAD
SIZE
M20x1.5
THREAD
LENGTH
35
OEM
NUMBER
1-1606-021
PART NUMBER
11606021
PART NUMBER
M2015DIN985
M20DIN74361
0900111480
0900112491
0900110100
Rottera
HEIGHT
WIDTH
330
38.5
370
38.5
PARTS TO SUIT
THREAD
SIZE
M20x1.5
M20x1.5
THREAD
OEM
PART NUMBER
LENGTH
NUMBER
38
1-1606-315
1160603150
38
1-1632-1487-1
08003
PART NUMBER
M2015DIN985
M20DIN74361
Right Hand
Shown
Club Foot
HEIGHT
Left hand
340
Right hand
340
PARTS TO SUIT
WIDTH
74
74
HOLE
SIZE
22
22
OEM
NUMBER
-
Captivated nut
PART NUMBER
1169901110
1169901120
PART NUMBER
M2070912129B
1164504190
DESCRIPTION
Breather to suit Lely power harrow gear box
www.mchc.ie
219
THREAD
1/8"
PART NUMBER
9115000144
Tillage
Power Harrow
1
LENGTH
WIDTH
SLOT SIZE
PART NUMBER
1
2
3
112
140
140
100
100
100
9 x 20
11 x 70
11 x 40
45
-
1164529440
1163223040
1164529480
Right Hand
Shown
18mm
HEIGHT
WIDTH
Left hand
320
320
Right hand
PARTS TO SUIT
110
110
HOLE
SIZE
21.5
21.5
HOLE
DISTANCE
70
70
PART NUMBER
3377012
3377013
M2070960109
M2015DIN985
SERIES
P500
www.mchc.ie
ENDS
1 3/8" 6 spline Yoke /
1 3/4" 6 spline K64 clutch
220 daNm
TO SUIT MODELS
APPLICATION
PART NUMBER
Zirkon
10/300, 12/300
P500710K64/22220
220
Tillage
Power Harrow
Power Harrow Tine to suit Maletti
Thickness:
Right Hand
Shown
SIDE
15mm
HEIGHT
Right hand
330
Left hand
330
PARTS TO SUIT
WIDTH
110
110
HOLE
SIZE
19
19
HOLE
DISTANCE
50
50
PART NUMBER
E030146
E040146
PART NUMBER
M1860960109
M1815DIN985
SIDE
18mm
HEIGHT
Right hand
330
Left hand
330
PARTS TO SUIT
www.mchc.ie
220a
WIDTH
110
110
HOLE
SIZE
19
19
HOLE
DISTANCE
50
50
PART NUMBER
E030146A
E040146A
PART NUMBER
M1860960109
M1815DIN985
Tillage
Power Harrow
Power Harrow Tine to suit Maschio
To suit models:
Dimate
SIDE
HEIGHT
Right hand
Left hand
285
285
Right Hand
Shown
WIDTH
HOLE
SIZE
90
17.5
90
17.5
PARTS TO SUIT
HOLE
DISTANCE
50
50
Blade protector
PART NUMBER
27100210
27100209
804106
Packer plate
27100539
Locking tab
27100312
01022
Dominator 12mm
SIDE
HEIGHT
Right hand
Left hand
300
300
Right Hand
Shown
WIDTH
HOLE
SIZE
100
17
100
17
PARTS TO SUIT
HOLE
DISTANCE
60
60
Blade protector
PART NUMBER
36100210
36100211
804106
Packer plate
27100539
Locking tab
36100312
01022
www.mchc.ie
221
OEM NUMBER
-
PART NUMBER
ND9091
Tillage
Power Harrow
Power Harrow Tine to suit Maschio
To suit models:
Dominator 15mm
SIDE
HEIGHT
Right hand
Left hand
300
300
Right Hand
Shown
WIDTH
HOLE
SIZE
100
17
100
17
PARTS TO SUIT
HOLE
DISTANCE
60
60
Blade protector
404121
404122
804106
Packer plate
27100539
Locking tab
36100312
Right Hand
Shown
PART NUMBER
01022
HB
HEIGHT x
WIDTH
332 x 60
332 x 60
HOLE
SIZE
13
13
HOLE
DISTANCE
44
44
OEM
NUMBER
10100262
10100263
PART NUMBER
08004
08005
270mm
WIDTH
270
102
PARTS TO SUIT
HOLE
SIZE
16.5
HOLE
DISTANCE
60
OEM
NUMBER
P7A48010
PART NUMBER
08009
M1655960129
M1615DIN985
305mm
WIDTH
305
112
PARTS TO SUIT
www.mchc.ie
222
HOLE
SIZE
20
HOLE
DISTANCE
60
OEM
NUMBER
P7A48011
PART NUMBER
08010
M2070960109
M2015DIN985
Tillage
Power Harrow
Power Harrow Tine to suit Rabewerk
To suit models:
Thickness:
Right Hand
Shown
SIDE
HEIGHT
Right hand
Left hand
315
315
WIDTH
HOLE
SIZE
100
17
100
17
PARTS TO SUIT
HOLE
DISTANCE
65
65
PART NUMBER
84045001
84045002
84050027
01022
010039
Right Hand
Shown
18mm
SIDE
HEIGHT
Right hand
Left hand
315
315
WIDTH
HOLE
SIZE
100
17
100
17
PARTS TO SUIT
HOLE
DISTANCE
65
65
PART NUMBER
84045001A
84045002A
84050027
M1665960129
010039
Right Hand
Shown
KG26
SIDE
HEIGHT
Right hand
Left hand
280
280
WIDTH
HOLE
SIZE
80
15
80
15
PARTS TO SUIT
HOLE
DISTANCE
40
40
PART NUMBER
84091201
84091202
84050027
Right Hand
Shown
KE11602
www.mchc.ie
01021
KG34
SIDE
HEIGHT
WIDTH
Right hand
Left hand
316
316
100
100
223
HOLE
SIZE
30.5
30.5
HOLE
DISTANCE
-
PART NUMBER
84377701
84377702
Tillage
Power Harrow
Power Harrow Tine to suit Rau
To suit models: Cyclotiller
OEM Reference: E44504 = 404121, E44503 = 404122
Right Hand
Shown
SIDE
HEIGHT
Right hand
Left hand
300
300
WIDTH
HOLE
SIZE
100
17
100
17
PARTS TO SUIT
HOLE
DISTANCE
60
60
PART NUMBER
404121
404122
01022
010039
Cyclotiller
SQUARE
WIDTH
25
ROUND
HOLE
WIDTH
SIZE
24
10.2
PARTS TO SUIT
OEM
NUMBER
E23374
PART NUMBER
M1065DIN7991
08011
M10DIN985
SIDE
15mm
HEIGHT
Right hand
330
330
Left hand
PARTS TO SUIT
WIDTH
110
110
HOLE
SIZE
19
19
HOLE
DISTANCE
50
50
PART NUMBER
E030146
E040146
PART NUMBER
M1860960109
M1815DIN985
SIDE
18mm
HEIGHT
Right hand
330
330
Left hand
PARTS TO SUIT
www.mchc.ie
224
WIDTH
110
110
HOLE
SIZE
19
19
HOLE
DISTANCE
50
50
PART NUMBER
E030146A
E040146A
PART NUMBER
M1860960109
M1815DIN985
Tillage
Power Harrow
Power Harrow Tine to suit SKH
Length:
HEIGHT
270mm
WIDTH
270
102
PARTS TO SUIT
HOLE
SIZE
16.5
HOLE
DISTANCE
60
OEM
NUMBER
P7A48010
PART NUMBER
08009
M1655960129
M1615DIN985
305mm
WIDTH
305
112
PARTS TO SUIT
HOLE
SIZE
20
HOLE
DISTANCE
60
OEM
NUMBER
P7A48011
PART NUMBER
08010
M2070960109
M2015DIN985
SIDE
HEIGHT
Right hand
Left hand
332
332
WIDTH
HOLE
SIZE
60
13
60
13
PARTS TO SUIT
HOLE
DISTANCE
65
65
PART NUMBER
08006
08007
01025
HEIGHT
RH & LH
364
WIDTH
THREAD
SIZE
36
M20
PARTS TO SUIT
THREAD
LENGTH
37
PART NUMBER
44158
80985UNF
www.mchc.ie
DIAMETER
THREAD
SIZE
5/8 Square
1/2"
3/4 Square
M16
PARTS TO SUIT
225
THREAD
LENGTH
-
PART NUMBER
08001
08002
12UNC934
M16DIN934
Tillage
Disc Harrow
EDGE
DIA.
THICKNESS
HUB
BOLT
HOLES
BOLT
C to C
PART NUMBER
Plain
460
11mm
(x4)
Round
78
XL011
Plain
460
11mm
(x4)
Round
85
XL041
Scalloped
460
11mm
(x4)
Round
85
XL043
Notched
460
11mm
(x4)
Round
85
XL044
EDGE
DIA.
THICKNESS
HUB
BOLT
HOLES
BOLT
C to C
PART NUMBER
Plain
18"
1 3/16"
Square
121200
Plain
20"
1 3/16"
Square
121204
www.mchc.ie
226
Tillage
Disc Harrow
EDGE
DIA.
THICKNESS
HUB
BOLT
HOLES
BOLT
C to C
PART NUMBER
Scalloped
465
10.5mm
(x6)
Round
50
3490471
Scalloped
620
12.5mm
(x6)
Square
66
3490466
Scalloped
620
12.5mm
(x5)
Square
95
3490467
BOLT
HOLES
BOLT
C to C
PART NUMBER
05009
EDGE
Plain
www.mchc.ie
DIA.
18"
THICKNESS
3.5
227
HUB
1 1/16"
1 3/16"
Dual
square
Tillage
Disc Harrow
EDGE
DIA.
THICKNESS
Plain
20"
Scalloped
20"
Scalloped
HUB
BOLT
HOLES
BOLT
C to C
PART NUMBER
1 9/32"
Round
9mm
(x3)
Round
99
05021
1 9/32"
Round
9mm
(x3)
Round
99
05094
22"
4.5
1 9/32"
Round
9mm
(x3)
Round
99
05018
EDGE
DIA.
THICKNESS
HUB
BOLT
HOLES
BOLT
C to C
PART NUMBER
Notched
450
12.5mm
(x4)
Round
69
466947
www.mchc.ie
227a
Tillage
Seed Drill
6
7
8&9
No.
1
2
3
4
5
6
7
8
9
DESCRIPTION
Accord bush end cap
Bush end
Spider covering tine
Tab for tine
Cast coulter tip
Rivet for coulter tip (240) M6x35
Coulter flap c/w pin
Covering tine 8mm
Covering tine 10mm
OEM NUMBER
494697
494739
494813
494677
495924 / 494266
657241
494876
495754
351034
PART NUMBER
494697
494739
494813
494677
494266
H59
494876
495754
351034
DESCRIPTION
Eradicator tine
Reversible point
OEM NUMBER
30900450
496837
496788
796836
229901
229429
PART NUMBER
496837
496788
229429
FOOD
O.D.
(mm)
36
38
www.mchc.ie
-10C to +60C
PVC Hose with rigid PVC spiral, for delivery and suction of food liquids.
Agriculture, Industrial, Transport and Home.
WEIGHT
PER METER
315g
335g
WORKING
PRESSURE (23C)
5 bar
5 bar
228
BURSTING
PRESSURE (23C)
15 bar
15 bar
ROLL
LENGTH
25 metres
25 metres
PART NUMBER
30
32
Tillage
Seed Drill
3
D9
DESCRIPTION
Coulter tip
Anti-block flap
300mm Disc coulter, hole size 52.5 / 8.5 (x3)
320mm Disc coulter, hole size 10.5 (x3)
PART NUMBER
956971
954927
951498
962292
Tines to suit Amazone / BBG D9 Covering Tine Element III Seed Drill
No.
1
2
3
4
DESCRIPTION
Long following tine
Short following tine to suit
Right hand outer following tine
Left hand outer following tine
QUANTITY ON 302
12
12
1
1
QUANTITY ON 402
15
15
1
2
PART NUMBER
952459
952461
952588
952591
Ultima
DESCRIPTION
Coulter point to suit Kockerling
PARTS TO SUIT
12 x 55mm (10.9)
Countersunk Bolt
c/w nut
OEM NUMBER
OEM NUMBER
PART NUMBER
506008
PART NUMBER
M1255109VK
www.mchc.ie
To fit models:
Ultima
LENGTH
635
BORE
98
229
THICKNESS
13
OEM NUMBER
501132
PART NUMBER
05102
Tillage
Seed Drill
DESCRIPTION
Front tine to suit Kuhn seed drill
Rear tine to suit Kuhn seed drill
THICKNESS
8.5mm
8.5mm
OEM NUMBER
-
PART NUMBER
53068500
53068600
EDGE
DIA.
THICKNESS
Plain
350
HUB
35mm
Round
BOLT
HOLES
BOLT
C to C
PART NUMBER
6mm
(x6)
Round
36
3490010
www.mchc.ie
No.
1
2
3
4
5
Saphir
DESCRIPTION
Coulter tip to suit seed drill
After harrow tine to suit seed drill
After harrow tine to suit seed drill
After harrow tine to suit seed drill
After harrow tine to suit seed drill
229a
OEM NUMBER
-
PART NUMBER
3378099
3537054
3537055
3537056
3537057
Tillage
Seed Drill
OEM NUMBER
877051 M1
OEM NUMBER
PART NUMBER
06014
PART NUMBER
865753 M1
01010062
H176
OEM NUMBER
873692 M1
873691 M1
PART NUMBER
06004
06002
Point to suit
370
10 x 40mm
Bolt c/w nut to
suit point
MF29, MF30
DESCRIPTION
13" Drill disc - 3 Hole
Hub assembly to suit MF 3 hole disc
MF30
DESCRIPTION
50 Rib tube to suit MF30 seed drill
42 Rib tube to suit MF30 seed drill
www.mchc.ie
230
OEM NUMBER
876889 M1
876888 M1
PART NUMBER
06006
06009
Tillage
Seed Drill
Left
Hand
Shown
OEM NUMBER
878373 M1
878374 M1
PART NUMBER
06012
06013
OEM NUMBER
877576 M1
PART NUMBER
06008
05050
BORE
84
THICKNESS
9
OEM NUMBER
PH 27706
PART NUMBER
27706
BORE
84
77
THICKNESS
9
11
OEM NUMBER
HAR 103
HAR 141
PART NUMBER
05050
06005
OEM NUMBER
HAR 105
PART NUMBER
05063
06005
www.mchc.ie
231
Tillage
Seed Drill
EDGE
DIA.
THICKNESS
HUB
BOLT
HOLES
BOLT
C to C
PART NUMBER
Notched
410
12.5mm
(x5)
Round
61
451371
Notched
410
12.5mm
(x5)
Round
61
451372
AIR
WATER
FOOD
O.D.
(mm)
112
www.mchc.ie
-15C to +65C
PVC Hose with rigid PVC spiral, practically non deformable and anti-choke.
Agriculture, Industrial, Transport and Home.
WEIGHT
PER METER
980g
BEND
RADIUS
100mm
231a
VACUUM
4 m.H2O
ROLL
LENGTH
30m
PART NUMBER
TRANS102
Tillage
108
M22x2
28
315
THICKNESS
28
OEM NUMBER
-
PART NUMBER
01018
PART NUMBER
01019
Hole Size:
Hole Distance:
B
Right Hand
Shown
SIDE
Right hand
Left hand
12.5
34 and 57
A
180
180
B
130
130
HEIGHT
80
80
THICKNESS
7
7
OEM NO.
98714
98715
PART NUMBER
01009A
01009B
OEM NUMBER
-
PART NUMBER
01015
PART NUMBER
206
32
560
THICKNESS
32
01012
'E' Series
13.5
57
SIDE
A
Right hand 180
Left hand
180
PARTS TO SUIT
B
135
135
Right Hand
Shown
www.mchc.ie
HEIGHT
80
80
THICKNESS
7
7
232
OEM NO.
3901
3900
OEM NO.
PART NUMBER
01001A
01001B
PART NUMBER
3903
01005
Tillage
'S' Series
16.5
50
SIDE
A
Right hand 175
Left hand
175
PARTS TO SUIT
B
135
135
Right Hand
Shown
HEIGHT
80
80
THICKNESS
9
9
OEM NO.
9863
9862
OEM NO.
PART NUMBER
01002A
01002B
PART NUMBER
67556
01014
T Series
16.5
75
SIDE
A
Right hand 200
200
Left hand
PARTS TO SUIT
B
135
135
Right Hand
Shown
HEIGHT
100
100
THICKNESS
8
8
OEM NO.
OEM NO.
PART NUMBER
01003A
01003B
PART NUMBER
01014
OEM NO.
9901
9900
OEM NO.
PART NUMBER
01027A
01027B
PART NUMBER
01030
GEM
11.5
57
SIDE
A
Right hand 170
170
Left hand
PARTS TO SUIT
B
140
140
Right Hand
Shown
THICKNESS
6
6
To suit models:
Hole Size:
Hole Distance:
B
Right Hand
Shown
www.mchc.ie
HEIGHT
80
80
SIDE
Right hand
Left hand
HD
16.5
76
A
205
205
B
140
140
233
HEIGHT
110
110
THICKNESS
8
8
OEM NO.
2720
2721
PART NUMBER
01034A
01034B
Tillage
Right Hand
Shown
Rotalabour
16.5
50
SIDE
LENGTH
Right hand
225
Left hand
225
PARTS TO SUIT
WIDTH
60
60
THICKNESS
12
12
OEM NO.
653256
653257
OEM NO.
PART NUMBER
01017A
01017B
PART NUMBER
67556
01014
216
560
THICKNESS
28
32
OEM NUMBER
650633
305434
OEM NUMBER
PART NUMBER
01010
01011
PART NUMBER
2080125
01012
JOINT WIDTH
106.5
OEM NO.
-
PART NUMBER
K5LGB179
www.mchc.ie
234
CHAIN SIZE
BS 1 1/2"
ASA 1 1/2"
PART NUMBER
DCA9
DCA5
Tillage
www.mchc.ie
235
Tillage
Standard
14.5
57
SIDE
A
Right hand 178
Left hand
178
PARTS TO SUIT
B
140
140
Right Hand
Shown
HEIGHT
80
80
THICKNESS
7
7
OEM NO.
35325
353255
OEM NO.
PART NUMBER
01004A
01004B
PART NUMBER
01006
OEM NO.
OEM NO.
PART NUMBER
01003A
01003B
PART NUMBER
01014
14 x 1.5 x 35mm
(12.9) Bolt c/w nut
HD
16.5
75
SIDE
A
Right hand 200
200
Left hand
PARTS TO SUIT
B
135
135
Right Hand
Shown
HEIGHT
100
100
THICKNESS
8
8
CHAIN SIZE
-
PART NUMBER
DCA2
SIDE
A
Right hand 190
190
Left hand
PARTS TO SUIT
B
115
115
Right Hand
Shown
www.mchc.ie
HEIGHT
90
90
THICKNESS
8
8
14 x 1.5 x 35mm
(12.9) Bolt c/w nut
236
OEM NO.
OEM NO.
PART NUMBER
01016A
01016B
PART NUMBER
01006
Tillage
Cobra
14.5
45
SIDE
Right hand
Left hand
HEIGHT
185
185
WIDTH
80
80
THICKNESS
-
OEM NO.
-
PART NUMBER
24100414
24100415
OEM NO.
OEM NO.
PART NUMBER
01008A
01008B
PART NUMBER
01020
OEM NO.
OEM NO.
PART NUMBER
01028A
01028B
PART NUMBER
M16x1.5x55
(12.9) Bolt only
M1655960129
M1615DIN985
B, C, SC Square Blade
14.5
56
SIDE
A
Right hand 215
215
Left hand
PARTS TO SUIT
B
140
140
Right Hand
Shown
HEIGHT
80
80
THICKNESS
8
8
14 x 1.5 x 40mm
(12.9) Bolt c/w nut
G Speed Blade
16.5
68
SIDE
A
Right hand 265
265
Left hand
PARTS TO SUIT
B
150
150
Right Hand
Shown
HEIGHT
90
90
THICKNESS
8
8
T R A C T O L Paint
We have a full range of paint colours available from stock. Contact a member of our Sales Staff
with your enquiry or see pages 422 - 428 of our Tractor & Trailer Catalogue for full listings.
www.mchc.ie
237
Tillage
OEM NUMBER
810926 M1
OEM NUMBER
PART NUMBER
05065
PART NUMBER
05020
OEM NUMBER
810915 M1
OEM NUMBER
PART NUMBER
05003
PART NUMBER
7162UNC931
716UNC934
Right Hand
Shown
DESCRIPTION
Right hand ridger board
Left hand ridger board
PARTS TO SUIT
3/8" x 1"
Bolt c/w nut
to suit point
Right Hand
Shown
OEM NUMBER
810901 M1
810902 M1
OEM NUMBER
PART NUMBER
05004A
05004B
PART NUMBER
H175
OEM NUMBER
810906 M1
810907 M1
PART NUMBER
05066A
05066B
OEM NUMBER
RDR1008
PART NUMBER
03022
N.L.A.
OEM NUMBER
PART NUMBER
ilable
RDR79RH
Ava03021
r
e
g
o Lon
NRDR79LH
www.mchc.ie
238
OEM NUMBER
RDR1006R
RDR1006L
PART NUMBER
03023A
Tillage
14.5
46
SIDE
A
Right hand 160
Left hand
160
PARTS TO SUIT
B
110
110
Right Hand
Shown
HEIGHT
80
80
THICKNESS
7
7
14 x 1.5 x 40mm
(12.9) Bolt c/w nut
OEM NO.
OEM NO.
PART NUMBER
01015A
01015B
PART NUMBER
01020
OEM NO.
900111017
900111018
OEM NO.
PART NUMBER
01033A
01033B
PART NUMBER
01020
OEM NO.
900111011
900111012
OEM NO.
PART NUMBER
01032A
01032B
PART NUMBER
01020
14.5
46
SIDE
A
Right hand 175
175
Left hand
PARTS TO SUIT
B
135
135
Right Hand
Shown
HEIGHT
80
80
THICKNESS
8
8
14 x 1.5 x 40mm
(12.9) Bolt c/w nut
B
Right Hand
Shown
14.5
46
SIDE
A
Right hand 198
Left hand
198
PARTS TO SUIT
B
110
110
HEIGHT
80
80
THICKNESS
8
8
14 x 1.5 x 40mm
(12.9) Bolt c/w nut
www.mchc.ie
238a
Tillage
517
45
360
Rexius
DESCRIPTION
Cross board tine to suit Vaderstad
Width 80, Thickness 10, Bolt holes 12.5
PARTS TO SUIT
Straight cross
board plate
200 x 45.
Thickness 10
Straight cross
board plate
260 x 100.
Thickness 10
Angled cross
board plate
240 x 100.
Thickness 8
OEM NUMBER
PART NUMBER
202181
OEM NUMBER
PART NUMBER
419998
419961
419999
OEM NUMBER
PART NUMBER
202181
OEM NUMBER
PART NUMBER
05092
05090
45
360
www.mchc.ie
517
DESCRIPTION
Universal cross board tine
Width 80, Thickness 10, Bolt holes 12.5
PARTS TO SUIT
Fitting bracket to
suit 70mm box
section.
Slot 82 x 25.
Thickness 10
Angled cross
board plate
256 x 150.
Thickness 8
239
Tillage
3/8"
H175
10mm
970502510
1 3/16"
30
H176
1 3/8"
35
1 1/2"
40
H160
1 3/4"
45
2"
50
H100
2 1/8"
55
2 3/8"
60
2 1/2"
65
2 3/4"
3 1/8"
3 1/2"
70
80
90
7/16"
H224UNF
H224UNFUK
H35
H35UK
H36
H36UK
H37
H37UK
H38
H38UK
H40
H40UK
05061
(UK type head)
-
DIAMETER
1/2"
-
12mm
-
5/8"
-
3/4"
-
H401
H82
H220
H164
M12X45
H80
H738
M1255109VK
01042
H150
H215PB
01043
-
H239
H90
DESCRIPTION
Standard head
Standard head
Standard head
Standard head
Standard head
TO FIT
Mini 'S' point
103011 KV point
Germinator, KKK point, Vaderstad-Agrilla
Kongskilde point 105000504
PART NUMBER
05058
103015
05019
05022
01044
TO FIT
KV 66868/69/78/79, 66880/81, 74868
Agrolux, KV, Overum ploughs
Agrolux, Fiskars, KV, Overum ploughs
Agrolux, KV, Overum, Sumo, Taylor Gent
Overum ploughs
-
PART NUMBER
H280
H283
H290
H284
H285
M20X75
H289
www.mchc.ie
DESCRIPTION
2 Nibs
2 Nibs
2 Nibs (Large head)
2 Nibs
2 Nibs
2 Nibs
2 Nibs
240
Tillage
DESCRIPTION
2 Flat edge head
4 Flat edge head
2 Flat edge head
2 Flat Edge Head
1 Flat edge head c/w flanged nut
1 Flat edge head
1 Flat edge head
1 Flat edge head
1 Flat edge head
TO FIT
KV Shares / Points No. 53 body
KV Landslides No.3 body, B2, share knife
KV Share No. 6, 7, 8 & 9 body
KV Landslides No.3 body
KV Landslides No.3 body
PART NUMBER
27004102
H405
13228
013234Z
13332
M16X40
M16X50
M16X80
M16X85
TO FIT
Howard rotavator blade 01001A/B
Trident / Rotomec harrow tines 08006 /
08007 / 08008
Krone & Maletti / Muratori rotavator
blades 01004A/B & 01016A/B
Maschio & Soema rotavator blades
24100414, 01008A/B, 01015A/B
Rabewerk harrow tine 84091201/02
Amazone harrow tine 6807400RH / LH
Rabewerk harrow Tine 84045001/02, A/B
Rau harrow tine 404121 / 22
Feraboli / Massey Ferguson / SKH
power harrow tine 08009
Kuhn harrow tine 52549400/500
Maschio rotavator tine 01028A/B
Amazone harrow tine 6807400RH/LH
Dowdeswell harrow tine 820380/81
Kuhn harrow tine 52539400/500,
52503700
Maschio harrow tine 27100209/10,
36100210/11, 404121/22
Rabewerk harrow tine 84045001/02
PART NUMBER
01005
DESCRIPTION
12.9 Hex bolt c/w nut
12 x 1.5 x 55mm
14 x 1.5 x 35mm
14 x 1.5 x 40mm
14 x 1.5 x 50mm
16 x 1.5 mm
16 x 1.5 x 47mm
16 x 1.5 x 50mm
16 x 1.5 x 55mm
16 x 1.5mm
16 x 1.5 x 60mm
16 x 1.5 x 70mm
16 x 1.5mm
5/8"UNF x 44.5mm
7/16" x 32mm
7/16"UNF x 40mm
01025
01006
01020
01021
010039
01008
01034
M1655960129
M1615DIN985
01022
M1670960129
M1615DIN934
01007
01030
TO FIT
KV Hub 60609/60624
PART NUMBER
31335
01014
www.mchc.ie
DESCRIPTION
10.9 Hex bolt c/w nut
241
Tillage
www.mchc.ie
Notes
242
Combine
Contents
Combine
Sections, Rivets, Fingers, Cutting Systems
246
Fingers
246
Schumacher
Cutting System
247 - 248
Section
249
249
Fingers
249
Finger Plates
249
Connection Strip
249
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
www.mchc.ie
243
Combine
DESCRIPTION
LENGTH
WIDTH
HOLE
SIZE
BOX
QTY
PART NUMBER
Smooth Section
75
58
5.5
40
25
N365
Smooth Section
75
76.2
5.6
51.5
25
DIN75
Under Serrated
75
76.2
5.6
51.5
25
DIN75R
Smooth Section
80
76
5.6
51.5
25
DIN80
Under Serrated
80
76
5.6
51.5
25
DIN80R
Smooth Section
80
76
5.5
51
25
RS7500
Smooth Section
80
76
5.3
51
25
N336
Under Serrated
80
76
5.6
52.4
25
LF9R
Top Serrated
80
76
5.6
51.5
2.2
25
DINLAND300
80
76
6.5
51.5
2.7
25
420100015
80
76
6.5
51.5
2.7
25
420100016
80
76
6.5
51.5
2.7
25
420100032
End Section
Smooth
80
44
6.5
24.5
2.7
420100005
Smooth Section
80.2
76
5.2
50.5
25
D1140
Under Serrated
80.2
76
5.2
50.5
25
D4010
Smooth Section
80.8
76
5.2
50.7
25
NV
Smooth Section
82
76
5.5
51.5
25
MD333
Top Serrated
82
76
5.6
52
2.7
25
365110
www.mchc.ie
244
HOLE
THICKNESS
DISTANCE
Combine
LENGTH
WIDTH
HOLE
SIZE
BOX
QTY
PART NUMBER
Under Serrated
82
76
5.6
52
2.7
25
365111
Under Serrated
Chrome / Galvanised
82
76
5.6
52
2.7
25
365111CG
Smooth
82
76
5.6
52
2.7
25
385892
End Section
Smooth
82
38
5.6
19
2.7
25
365112
Top Serrated
82.2
76
5.2
50.7
25
206236MI
Under Serrated
82.5
76
5.2
52.2
2.8
25
322481
Top Serrated
82.55
76
6.6
50.8
2.7
25
P49650H
Under Serrated
82.3
76
51.6
2.8
25
67623401
Top Serrated
84
76
6.5
51.5
2.7
25
611203
Under Serrated
84
76
6.5
51.5
2.7
25
611316
www.mchc.ie
245
HOLE
THICKNESS
DISTANCE
Combine
Rivets / Fingers
Cutter Bar Mower & Combine Knife Rivets
Supplied in 1/2 Kg pack
DIAMETER
LENGTH
PACK SIZE
mm
5
5
5
5
5
5
5
5
5
5.25
5.25
5.25
5.25
5.25
5.25
6
6
6
6
6
6
6
8
mm
13
14
16
18
20
22
25
32
35
14
16
20
22
25
32
12
15
16
18
25
30
35
35
DIN 661
COUNTER SUNK
PART NUMBER
DIN660
ROUND HEAD
PART NUMBER
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
5X20CS
5X22CS
5X25CS
5X32CS
5X35CS
5.25X14CS
5.25X16CS
5.25X20CS
5.25X22CS
5.25X25CS
5.25X32CS
6X15CS
6X35CS
-
5X13RH
5X14RH
5X16RH
5X18RH
5X20RH
5X25RH
5.25X13RH
5.25X16RH
5.25X20RH
5.25X22RH
5.25X25RH
5.25X32RH
6X12RH
6X16RH
6X18RH
6X25RH
6X30RH
8X35RH
DESCRIPTION
PART NUMBER
Single finger to
suit Claas
TYPE
DESCRIPTION
PART NUMBER
522182K6S
Double finger to
suit Fahr
111306023607
Double finger to
suit Claas
6262950
Double finger to
suit John Deere
Z11228
Double finger to
suit Claas
6762352
Triple finger to
suit John Deere
H25603
Double finger to
suit Clayson
379720
Double finger to
suit Laverda
1896131
www.mchc.ie
WIDTH
30
CURL ID THICKNESS
27
5
246
OEM NUMBER
Z20458 / Z20478
PART NUMBER
Z20458
Combine
GEBR.
SCHUMACHER
www.mchc.ie
247
Combine
GEBR.
SCHUMACHER
Standard
The standard version includes all established components for a
good cut. You will benefit from the technical innovations offered by
Easy Cut II. The roller guides can be mounted subsequently very
easily without much time and effort.
Comfort
The top guiding roller. For a straight knife movement.
The advantage of a straight knife movement is an extended lifetime
of knife and guards. We recommend using the top guiding rollers
in combination with wear plates for all established cutting units and
combine types.
Premium
Twice the roll. For wide cutter bars.
The additional advantage of the bottom guiding roller means less
friction on the knife back and therefore less wear. We recommend
using the bottom guiding roller for cutting widths starting at a
minimum of 20 feet (6 metres). It is not recommended for all types
of cutting units. Please ask us if the premium version is suitable for
your combine!
Example:
Claas Lexion Vario Header, upgraded with Easy Cut II in 2011
DESCRIPTION
Kit to suit 7.50m Comfort
CUTTING
WIDTH
3.90m
4.50m
5.40m
6.00m
6.60m
7.50m
9.00m
PART NUMBER
17038.02
STANDARD
COMFORT
PREMIUM
17032.01
17033.01
17035.01
17036.01
17037.01
17038.01
17039.01
17032.02
17033.02
17035.02
17036.02
17037.02
17038.02
17039.01
17032.03
17033.03
17035.03
17036.03
17037.03
17038.03
17039.03
Example:
New Holland Varifeed, upgraded with Easy Cut II in 2011
DESCRIPTION
Kit to suit 7.32m Comfort
CUTTING
WIDTH
5.18m
6.10m
7.32m
9.15m
www.mchc.ie
248
PART NUMBER
17094.02
STANDARD
COMFORT
PREMIUM
17092.01
17093.01
17094.01
17095.01
17092.02
17093.02
17094.02
17095.02
17092.03
17093.03
17094.03
17095.03
Combine
DESCRIPTION
LENGTH
WIDTH
80
76
HOLE
SIZE
6.5
HOLE
THICKNESS
DISTANCE
51.5
2.7
80
76
6.5
51.5
80
76
6.5
51.5
End Section
Smooth
80
44
6.5
24.5
BOX
QTY
25
PART NUMBER
2.7
25
420100016
2.7
25
420100032
2.7
420100005
420100015
SIZE
STRENGTH
M6 x 18
10.9
PACK QTY
DESCRIPTION
PART NUMBER
001006018
001106001
011006028
420100012
M6
420100017
M6
420100018
M6
M6 x 28
50
10.9
M6 x16
50
DESCRIPTION
PART NUMBER
TYPE
DESCRIPTION
PART NUMBER
Schumacher
Double finger to
suit John Deere
410400039
Schumacher
Triple finger
410400031
Schumacher
Double finger
410100001
Schumacher
Triple end finger
410400036
Schumacher
Double end finger
410300024
No.
1
2
DESCRIPTION
300mm Finger plate, thickness 5mm
256mm Finger plate, thickness 6mm
PART NUMBER
410401005
410401006
www.mchc.ie
249
Combine
www.mchc.ie
250
PART NUMBER
420100007KIT
Sprayer
Contents
Sprayer
Nozzles, Caps, Nozzle Holders, Filtration, Fittings, Hose, Clips, Gauges, Pumps, Lances
Nozzles
252 - 268
252 - 254
255 - 256
Ultra-Low Drift
257
Finer Air-Inclusion
258 - 260
Twin Nozzles
261
Six Stream
262
263
Flood Spray
264
Twin Cap
265
Calibrator
265
XT Nozzles
266
269
269
Nozzle Holders
270 - 271
Filtration
272 - 281
Valves
282 - 283
284 - 295
Polypropylene Fittings
285 - 291
PVC Pipe
292
PVC Fittings
292 - 294
Fitting Accessories
294
General Fittings
295
296 - 297
Hose
298 - 299
Hose Clips
299 - 300
Pressure Gauges
301
Pumps
302
Sprayer Lances
303
Please Note: OEM Numbers are for reference purposes only and does not imply parts are original equipment.
www.mchc.ie
251
Sprayer
Deflect pattern
Also known as anvil or flood tips, deflect tips produce a wide-angled flat
pattern when operated at low pressures (0,7-3 bar). The tips generally
produce a coarse, even spray.
Cone pattern
These spray tips produce either a solid circular (full cone tips) or a hollow
circular footprint (hollow cone tips). Full cones are ideal for spot spraying,
whereas hollow cones are used on air-assisted sprayers and directed
sprays.
www.mchc.ie
252
Full
Hollow
Anvil / Flood
Tapered
Even
Sprayer
Size of Droplets
Retention on Difficult to
Wet Leaves
Very Fine
Small
Excellent
Fine
Very Good
Medium
Good
Coarse
Moderate
Very Coarse
Poor
Extremely Coarse
Large
Very Poor
*Always read the pesticide label to determine which spray quality is required
Used for
Drift Potential
Exceptions
Good Cover
Most Products
Systemic Herbicides
Soil Herbicides
Liquid Fertilizer
High
Low
The ASABE S572 standard uses eight droplet classification categories, six of which are common for agriculture and horticulture:
Very Fine
Fine
Medium
Coarse
Very Coarse
Extremely Coarse
sprays provide enhanced retention for directed spraying on the target including:
Foliar-acting weed control
Contact-acting fungicides and insecticides
Medium
Coarse
Spray Classification is based on Spray Droplet Sizes assessed by the ASABE S572 Standard.
Droplets produced by drift-reducing air-induction nozzles contain air bubbles and offer better coverage than fluid only droplets of
the same size. An air-induction nozzle classified as 'coarse' by ASABE S572 may be expected to achieve similar spray coverage
in practice to a standard nozzle classified as 'medium', allowing it to be used for spraying a similar range of targets. Always read
the product label and refer to manufacturer's latest advice to determine the spray quality required.
www.mchc.ie
253
Sprayer
Colour Code
VF
F
M
C
VC
XC
The following chart has been designed to simplify selection of the correct
spray tip type for the agrochemical to be applied. It is based on having
good conditions for spraying and should be used in conjunction with the
agrochemical manufacturers label. Increased carrier rates may allow for
coarser sprays to reduce risk of drift. Always follow the
agrochemical label exactly.
Classification
Very Fine
Fine
Medium
Coarse
Very Coarse
Extremely Coarse
Broadcast
Wide
Stream
Banding & Directed
Special
M
F
VF
C
M
F
Polyacetal
15 to 115
120
Tapered Fan
Air-injected Anti-Drift
Ceramic
30 to 100
80, 110
Tapered Fan
GuardianAIR Twin
Polyacetal
30 to 115
110
Excellent Excellent
GuardianAIR
Polyacetal
15 to 115
110
Tapered Fan
V Good
Guardian
Polyacetal
15 to 115
120
Tapered Fan
Good
Lo-Drift
Polyacetal
15 to 70
80, 110
Tapered Fan
Good
Drift Reduction
Ceramic
30 to 70
110
Tapered Fan
Good
XT
Boom X Tender
MISTING
TC
TwinCap
Draft
Control
Ultra Lo-Drift
Soil
Applied
ULD
AVI
GAT
GA
GRD
LD
ADI
VP
AXI
TR
F
ACID F
ACID LD
HF
DT
APM
ESI
CM
DC
AMT
DC/CR
HCX
ATR
HCA
TVI
AVI
AXI
FCX
E
OC
OCI
AVI-OC
Good
Polyacetal
15 to 70
80, 110
Tapered Fan
V Good
Good
Good
Ceramic
20 to 70
80, 110
Tapered Fan
V Good
Good
Good
Total Range
Stainless Steel
15 to 70
80, 110
Tapered Fan
V Good
Good
Good
Polyacetal
30 to 60
80, 110
Tapered Fan
Good
Good
Good
PVDF
110
Tapered Fan
Good
Good
Lo-Drift
PVDF
110
Tapered Fan
140
Polyacetal
20 to 80
Polyacetal
15 to 60
Good
V Good
Good
Wide-Angle Flood
Ceramic
10 to 60
Good
V Good
Good
Six Stream
Ceramic
15 to 60
6-stream
Excellent Excellent
Straight Stream
PVDF
15 to 150
Stream
V Good
V Good
Flow-Regulating Disc
Polyacetal
10 to 150
Stream
V Good
V Good
Flow-Regulating Disc
Ceramic
10 to 725
Stream
V Good
V Good
Polyacetal
10 to 150
V Good
Good
Polyacetal
40 to 150
80
Hollow Cone
V Good
Good
Hollow Cone
Ceramic
40 to 350
80
Hollow Cone
V Good
Good
Hollow Cone
Ceramic
40 to 350
80
Hollow Cone
V Good
Good
Hollow Cone
Ceramic
70 to 360
80
Hollow Cone
Good
Excellent
Excellent
FanTip
Ceramic
40 to 350
80
Tapered Fan
Good
Excellent
Excellent
FanTip
Ceramic
40 to 350
80
Tapered Fan
V Good
Good
Full Cone
Polyacetal
15 to 150
80
Full Cone
Good
V Good
Polyacetal
30 to 60
80
Even Fan
V Good
V Good
V Good
Off-Centre Flat
Brass
30 to 60
80
Good
Good
Good
Off-Centre Ceramic
Ceramic
30 to 60
80
Good
Good
Good
Air-injected Off-Centre
Ceramic
Polyacetal or
Stainless Steel
Polyacetal
Polyacetal or
PVDF
40 to 100
80
Good
30 to 60
105
C VC XC
DeflecTip
40 to 150
VF F
Good
Hi-Flow
XC
VC
C
V Good
Liquid
Fertilizer
C
M
F
Spray Tip
Foliar
Systemic
Pattern
M
F
VF
Foliar
Contact
Pressure Nominal
Range
Spray
Angle
Insecticides
Contact
Systemic
Code
Type
Orifice
Material
Fungicides
Contact
Systemic
S
S
S
S
V Good
V Good
V Good
At high volume
www.mchc.ie
At high pressure
254
Sprayer
BCPC
CODE
Green
VP015F110
90 L/ha
7.5 GPA
(100#)
Yellow
VP02F110
120 L/ha
10 GPA
(100#)
Lilac
VP025F110
150 L/ha
12.5 GPA
(100#)
Blue
VP03F110
180 L/ha
15 GPA
(100#)
Red
VP04F110
240 L/ha
20 GPA
(100#)
Brown
VP05F110
300 L/ha
25 GPA
(50#)
Grey
VP06F110
360 L/ha
30 GPA
(50#)
White
VP08F110
480 L/ha
40 GPA
(50#)
L Blue
VP10F110
600 L/ha
50 GPA
(30#)
L Green
VP15F110
900 L/ha
76 GPA
(30#)
PART
NUMBER
F110/0.60/3
Medium
Fine
Fine
Fine
Fine
1.00
2.00
3.00
4.00
5.00
0.346
0.490
0.600
0.693
0.775
42
59
72
83
93
35
49
60
69
78
30
42
51
59
66
26
37
45
52
58
23
33
40
46
52
21
29
36
42
47
F110/0.80/3
Medium
Fine
Fine
Fine
Fine
1.00
2.00
3.00
4.00
5.00
0.462 55
0.653 78
0.800 96
0.924 111
1.033 124
46
65
80
92
103
40
56
69
79
89
35
49
60
69
77
31
44
53
62
69
28
39
48
55
62
F110/1.00/3
Medium
Fine
Fine
Fine
Fine
1.00
2.00
3.00
4.00
5.00
0.577 69 58 49
0.816 98 82 70
1.000 120 100 86
1.155 139 116 99
1.291 155 129 111
43
61
75
87
97
38
54
67
77
86
35
49
60
69
77
F110/1.20/3
Medium
Medium
Fine
Fine
Fine
1.00
2.00
3.00
4.00
5.00
0.693
0.980
1.200
1.386
1.549
83
118
144
166
186
69
98
120
139
155
59
84
103
119
133
52
74
90
104
116
46
65
80
92
103
42
59
72
83
93
F110/1.60/3
Coarse
Medium
Medium
Fine
Fine
1.00
2.00
3.00
4.00
5.00
0.924
1.306
1.600
1.848
2.066
111
157
192
222
248
92
131
160
185
207
79
112
137
158
177
69
98
120
139
155
62
87
107
123
138
55
78
96
111
124
F110/2.00/3
Coarse
Medium
Medium
Medium
Fine
1.00
2.00
3.00
4.00
5.00
1.155
1.633
2.000
2.309
2.582
139
196
240
277
310
116
163
200
231
258
99
140
171
198
221
87
122
150
173
194
77
109
133
154
172
69
98
120
139
155
F110/2.40/3
Coarse
Coarse
Coarse
Medium
Medium
1.00
2.00
3.00
4.00
5.00
1.386
1.960
2.400
2.771
3.098
166
235
288
333
372
139
196
240
277
310
119
168
206
238
266
104
147
180
208
232
92
131
160
185
207
83
118
144
166
186
F110/3.20/3
Coarse
Coarse
Coarse
Coarse
Coarse
1.00
2.00
3.00
4.00
5.00
1.850
2.613
3.200
3.695
4.130
222
314
384
443
496
185
261
320
370
413
159
224
274
317
354
139
196
240
277
310
123
174
213
246
275
111
157
192
222
248
F110/4.00/3
Coarse
Coarse
Coarse
Coarse
Coarse
1.00
2.00
3.00
4.00
5.00
2.130
3.266
4.000
4.619
5.160
277
392
480
554
619
231
327
400
462
516
198
280
343
396
442
173
245
300
346
387
154
218
267
308
344
139
196
240
277
310
F110/6.00/3
Coarse
Coarse
Coarse
Coarse
Coarse
1.00
2.00
3.00
4.00
5.00
3.460
4.899
6.000
6.928
7.750
415
588
720
831
930
346
490
600
693
775
297
420
514
594
664
260
367
450
520
581
231
327
400
462
517
208
294
360
416
465
Nozzle
Spacing
50cm (20")
110
Recommended Boom
Height: 50cm (20")
Rated Pressure: 1-5 bar
www.mchc.ie
255
Sprayer
PART
NUMBER
Green
VP015F80
90 L/ha
7.5 GPA
(100#)
Yellow
VP02F80
120 L/ha
10 GPA
(100#)
Blue
VP03F80
180 L/ha
15 GPA
(100#)
Red
VP04F80
240 L/ha
20 GPA
(50#)
Brown
VP05F80
300 L/ha
25 GPA
(50#)
Grey
VP06F80
360 L/ha
30 GPA
(50#)
BCPC
CODE
F80/0.60/3
Medium
Fine
Fine
Fine
Fine
1.00
2.00
3.00
4.00
5.00
0.346
0.490
0.600
0.693
0.775
42
59
72
83
93
35
49
60
69
78
30
42
51
59
66
26
37
45
52
58
23
33
40
46
52
21
29
36
42
47
F80/0.80/3
Medium
Fine
Fine
Fine
Fine
1.00
2.00
3.00
4.00
5.00
0.462 55
0.653 78
0.800 96
0.924 111
1.033 124
46
65
80
92
103
40
56
69
79
89
35
49
60
69
77
31
44
53
62
69
28
39
48
55
62
F80/1.20/3
Medium
Medium
Fine
Fine
Fine
1.00
2.00
3.00
4.00
5.00
0.693
0.980
1.200
1.386
1.549
83
118
144
166
186
69
98
120
139
155
59
84
103
119
133
52
74
90
104
116
46
65
80
92
103
42
59
72
83
93
F80/1.60/3
Coarse
Medium
Medium
Fine
Fine
1.00
2.00
3.00
4.00
5.00
0.924
1.306
1.600
1.848
2.066
111
157
192
222
248
92
131
160
185
207
79
112
137
158
177
69
98
120
139
155
62
87
107
123
138
55
78
96
111
124
F80/2.00/3
Coarse
Medium
Medium
Fine
Fine
1.00
2.00
3.00
4.00
5.00
1.155
1.633
2.000
2.309
2.582
139
196
240
277
310
116
163
200
231
258
99
140
171
198
221
87
122
150
173
194
77
109
133
154
172
69
98
120
139
155
F80/2.40/3
Coarse
Coarse
Medium
Medium
Medium
1.00
2.00
3.00
4.00
5.00
1.386
1.960
2.400
2.771
3.098
166
235
288
333
372
139
196
240
277
310
119
168
206
238
266
104
147
180
208
232
92
131
160
185
207
83
118
144
166
186
Available in packs of 6 or
FastCap VP, complete with tip,
cap and seal already assembled
for easy installation
ISO standard colours and sizing
ensure that VP fits all standard
caps
Nozzle
Spacing
50cm (20")