Professional Documents
Culture Documents
CHHJM15 6195 59
CHHJM15 6195 59
CHHJMS15-6195-59
6195
(H) Foot Mount
(H) Horizontal
(J) Adapter-NEMA C-Face
( ) Standard Metric Size
59
1750
H-Casing
Output Shaft
C-Face
Motor
E1
F1
O1
P1
BW
530
440
620
250
240
25
380
30
35
26
90
539
430
451
170
U TOL.
L1
KEY
95
+0 / -0.022
135
M20
34
25 x 14 x 125
CE
MF
MP
AB
741
544
324
269
Date: 6/7/2016
Configuration Number: C-2016-027268
Product Ratings
619 Flange
NEMA
254TC
Toshiba
EQP Global-SD
AEPX0754-A143
15 HP x 4 P
0154SDSR42A-P
230/460V, 60Hz, 3Ph
Footed C-Face, TEFC
Mount Sumitomo Supplied
Included
Lubrication Specifications
Selected Lubrication
Lubrication Method
Lubrication Option
Standard Lubrication
Oil Bath
NO OIL (customer to fill)
Environmental Specifications
Installation Location
Ambient Temperature
Ambient Humidity
Environment
Food Grade Required
Elevation Above Sea Level
Indoor
14 - 104F (-10 - 40C)
Under 90%
Standard
Not Available (6170 - 6275)
Under 3300 ft/1000 m
- kW
- N-m
1750
29.7
18.8 kW
5760 N-m
43100 N
Reducer Options
SHIELD 360 Package
Mill Duty
Chemical Duty
Dusty, Weather Proof IP54
Food & Washdown Options
Ductile Iron Housing
High Capacity Bearing
Shoulder Bolts / Dowel Pins
Severe Duty Breather
Glass Sight Oil Gauge
Drain Valve
Magnetic Drain Plug
Seal Options
Double Output Oil Seals
Paint Specification
Clear Top Coat
Hardware Option
Stainless Steel Nameplate
Metal Tag Nameplate
Export Packaging
Long Term Storage
Extended Warranty
Not Available
Option Not Selected
Option Not Selected
Option Not Selected
None Selected
Option Not Selected
Option Not Selected
Option Not Selected
Not Selected
Option Not Selected
Not Selected
Not Selected
Nitrile Seal
Not Selected
Acrylic Polymer
Not Selected
Options Not Selected
Not Selected
Not Selected
Unknown Tag
Unknown Tag
Consult Factory
Configuration Messages
Output Shaft Overhung Load (OHL) Capacity
The Output Shaft OHL Capacity needs to be checked if Output Shaft is not direct coupled to the application. Using the Product Overhung Load
Capacity value from the Selection, please check it against the actual OHL using the method described in the Catalog. If Cyclo unit will see
significant vibration from the application and the Cyclo output shaft will not be direct coupled to the application, please consult the Factory for
additional guidelines on Service Factor adjustment.
All Configuration data contained within this technical specification sheet is subject to change. Please refer to Sumitomo Drive Technologies' Terms and
Conditions located at smcyclo.com for further information. For more specific product and/or application data, please contact your Sumitomo Drive
Technologies' Representative.
To request a catalog or for more information on any of our high quality products, please visit our website: www.sumitomodrive.com.
Thank you for your interest in Sumitomo products.