Presence of a 200 mm thick block wall at proposed door location
The door opening will start from an existing column A store full of unwanted good is just behind the proposed door location and has no tiles,
lighting and screed on internal walls
Store must be emptied and improved prior to commencement of work (breaking/cutting
of wall) Marking of door dimension using coloured pen
Cutting / breaking of wall from ground (tile level)
o Door Dimension : 240 cm by 90 cm
Concrete placing would be needed around the opening of the wall o (use wooden formwork and braces to hold and allow plinth concrete hardening) If plinth is used on top of opening, allow for 100 mm concrete plinth with 2y6 steel o Then insert aluminium framing 240 cm by 90 cm Note plinth could be avoided for aluminium door o 2y6 reinforcement of 90 cm long for resisting shear Carting of waste from onsite is very important as the main entrance for hairdressing class is right next door.