Professional Documents
Culture Documents
TDS 11104400 EN EN Stainless-Steel-Spray-bright-gr PDF
TDS 11104400 EN EN Stainless-Steel-Spray-bright-gr PDF
Processing
Shake can before use till the mixing ball can be heard. Spray on evenly
and crosswise at room temperature (approx. +20C (+68F)) and at
about 25 cm distance from the surface crosswise. Dust-dry after
approx. 15 minutes, fully hardened after 10-12 hours.
Storage
Pressurized container: protect from sunlight and do not expose to
temperatures exceeding +50C.
Note
The specifications and recommendations given in this technical data
sheet must not be seen as guaranteed product characteristics. They
are based on our laboratory tests and on practical experience. Since
individual application conditions are beyond our knowledge, control and
responsibility, this information is provided without any obligation.
Technical data
Colour
Application
Binding agent
Pigment
Alkyd resin
Stainless steel and aluminium pigments
Pigment purity
Content
Specific weight
Recommended primer
Processing temperature
Consumption at 1.5 cross coats
Layer thickness at 1.5 cross coats
dust dry after
Hardened after
paintable
Abrasion-resistant
Cross cutting DIN 53151 / ISO 2409
Salt spraying test ISO 9227
Mandrel bend test DIN EN ISO 1519
Top coating
Temperature resistance after complete hardening
Storage stability
400 ml
0,95 1,00 g/cm
Zinc Spray
+5 up to +35 C
approx. 120 ml/m
approx. 15 - 25 m
10 Min.
10 h
8h
yes
Gt 0 to Gt 1
>140 h
no hair cracking
not required
-50 up to +300 C
24 months