Professional Documents
Culture Documents
Esprit HD Series IP Positioning System A&E Specification
Esprit HD Series IP Positioning System A&E Specification
TECHNICAL SPECIFICATIONS
SECURITY SYSTEM
DIVISION 28 ELECTRONIC SAFETY AND SECURITY
LEVEL 1__28 20 00 ELECTRONIC SURVEILLANCE
LEVEL 2__28 23 00 VIDEO SURVEILLANCE
LEVEL 3__28 23 29 VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
1
2
2.1
GENERAL
A.
Equipment and materials used shall be standard components that are manufactured and
available for purchase as standard replacement parts as long as the product is commercially
available from the manufacturer.
B.
All manufactured products shall be thoroughly tested and proven in actual use.
C.
All manufactured products shall include, at no additional cost, online support services and
availability of a toll-free (U.S. and Canada), 24-hour technical assistance program (TAP) for
emergencies.
D.
The manufacturer shall repair or replace without charge, manufactured products proven
defective in material or workmanship for the stated warranty period from the date of shipment.
PRODUCTS
INDOOR/OUTDOOR, HD NETWORK CAMERA SYSTEM
A.
B.
C.
D.
The indoor/outdoor, HD network positioning system shall use a standard Web browser
interface for remote administration and configuration of camera parameters. The browser
interface shall provide PTZ control including preset and pattern and on-screen display (OSD)
for access to camera programming.
E.
The indoor/outdoor, HD network positioning system shall provide a 32 window blank feature.
F.
G.
The indoor/outdoor, HD network positioning system shall include a built-in heater, window
defroster/defogger, sun shroud, and insulation blanket.
H.
The indoor/outdoor, HD network positioning system shall feature electronic Image Stabilization
(EIS).
I.
J.
The indoor/outdoor, HD network positioning system shall offer an Integrated Optics Package
(IOP) or a pressurized Integrated Optics Cartridge (IOC).
K.
The indoor/outdoor, HD network positioning system shall include pedestal, and/or wall mount
options.
L.
The indoor/outdoor, HD network positioning system shall provide nine types of integrated incamera video analytics with the ability to provide hardware and software alarms based on the
analytic behaviors.
1.
Pelco Analytic Suites shall be configured and enabled using a standard Web browser.
2.
Pelco Analytic Suites shall allow remote operation and alarm notification when used with
an Endura system or a third-party system that supports Pelcos Analytics API.
3.
M.
IP-based system. It is also compatible with Pelco VideoXpert, Endura, and Digital Sentry video
management systems.
N.
The indoor/outdoor, HD network positioning system shall meet or exceed the following design
and performance specifications.
1.
General Specifications
a. Construction
b. Finish
c. Operating Temperature
absolute
power-up, the
and be operational from a
25C (13F)
d. Operating Environment
(130 mph)
e. Operating Humidity
1. Unit
relative humidity
Unit Weight
1. Standard with IOP
2. With Wiper and IOP
3. With Wiper and IOC
g. Viewing Window
f.
glass
h. Limit Stops
i.
j.
frame
Wiring
Programming
1. Azimuth Zero
2. Azimuth/Elevation
azimuth
the web UI
3. Direction Display
and W)
k. Mode of Operation
l.
Auxiliary Output
which shall
two seconds of
2.
Mechanical Specifications
a. Variable Speed
b. Preset Accuracy
c. Pan Movement
d. Vertical Tilt
e. Manual Pan/Tilt Speeds
1. Pan
2. Tilt
f. Preset Speeds
1. Pan
2. Tilt
g. Configurable Presets
h. Tours
i. Window Blanks
j. Park
k. Pressurized IOC
1. Internal Sensors
2. On-Screen Alert
3. Relief Valve
4. Certification
3.
Video Specifications
a. Video Encoding
b. Video Streams
c.
the
Frame Rate
resolution,
d. Available Resolutions
1. 16:9 Aspect Ratio
max
max
max
e. Supported Protocols
f.
IPv4,
HTTP, HTTPS, LDAP
SSL, SMTP, FTP, and
(EAP)
Users
1. Unicast
streams)
2. Multicast
g. Security Access
h. Software Interface
i. Pelco System Integration
j. Open API
k. Minimum PC Requirements
1. Processor
2. Operating System
DirectX 9.0c or
later)
3. Memory
4. Network Interface Card
5. Monitor
6. Web Browser
7. Media Player
4 GB RAM
100 megabits (or greater)
Minimum of 1024 x 768 resolution, 16- or 32-bit
color resolution
Internet Explorer 8.0 (or later) or
Firefox 3.5 (or later);
Internet Explorer 8.0 (or later)
Pelco Media Player or QuickTime 7.6.5 for
Windows XP and Windows 7; or
QuickTime 7.6.4 for Mac OS X
Camera/Optics Specifications
a. Sensor Type
b. Optical Zoom
c. Digital Zoom
d. Maximum Resolution
e. Lens
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
5.
6.
Electrical Specifications
a. Input Voltage
b.
c.
d.
e.
10%
Maximum 70 VA
Thermostatically controlled
Screw terminals for power and open collector
auxiliary output. RJ-45 connector for
RJ-45, 2 power source connections made at
mount location with wire splices and 1
wire splice; 2 wire splices for
Open collector output with 2-second activation;
connected relay must require no more
32 VDC and 40 mA to energize relay
length between Esprit and relay
than 3 m (9384 ft)
45 to 50C (50 to 122F) sustained;
60C (140F) maximum
Will remain operational in 145 kph (90 mph)
wind conditions; withstands 209 kph
(130 mph)
O.
7.
Analytic Specifications
a. Required Systems for Pelco Analytics
1. Pelco Interface
WS5200 Advanced System Management
Software on an Endura 2.0 (or later)
system
2. Open API
The Pelco API can transmit behavior alarm data
to third-party applications, available at
pdn.pelco.com
8.
Warranty
a. 24 months, parts and labor
P.
CE, Class A
FCC, Class A
KCC
UL/cUL Listed
C-Tick
Meets NEMA 4X and IP66 standards
ONVIF Profile S
Cisco Medianet Media Services Proxy 2.0 compatible
Meet IP67 standards (pressurized IOC)
ES5230-12W
8. ES5230-15W
9. ES5230-12NP
10. ES5230-15NP
11. ES5230-12WP
12. ES5230-15WP