Professional Documents
Culture Documents
Statics Mechanics Problem
Statics Mechanics Problem
Statics Mechanics Problem
Problem 2
F1
Figure for Problem 1 and Problem 2
F1
Figure for Problem 3
Problem 4
The pipe ACDE is supported by ball-and-socket joints at A and E and by
the wire DF. Determine the tension in the wire when a F1 load is
applied at B as shown.
F1 = (220 + 0.001* RN1) lbs
F1
Problem 5
The rectangular plate shown weighs W = (60 + 0.001*RN1) lbs and is
held in the position shown by hinges at A and B and by cable EF.
Assuming that the hinge at B does not exert any axial thrust,
determine (a) the tension in the cable, (b) the reactions at A and B.