Professional Documents
Culture Documents
Regenerative Receiver BF981
Regenerative Receiver BF981
Regenerative Receiver BF981
10/13/08 10:41:57
1/2
10/13/08 10:41:57
I use a 9 Volt battery (6F22 or PP3) as the power supply. If you use a mains supply, make sure that is well smoothed and
regulated. DO NOT connect a high current supply to your computer mic. input.
When receiving SSB or CW, some of the oscillator signal will be radiated by the antenna. In the valve (tube) era,
regenerative receivers were notorious for causing interference. This is not likely to be a problem with this low power
circuit. The radiated power should be less than 1 mW.
2/2