Professional Documents
Culture Documents
Very Cheap Ez-12 D.I.Y. Parabolic Reflector: Wifi Gain For Router, Ap and Usb Wifi Dongle
Very Cheap Ez-12 D.I.Y. Parabolic Reflector: Wifi Gain For Router, Ap and Usb Wifi Dongle
Parabolic Reflector
WiFi gain for Router, AP and USB WiFi dongle *
1. Open the template (Windsurfer.jpg) in MS Paint or something like that and resize if desired.
Ensure that you keep the square on the diagram square.
2. Print image on business card stock or acetate (document protector).
3. Cut it out and open the six slots of the reflector with scissors or a hobby- or break-knife.
If the used paper is too thin, make a copy of it on thicker cardboard.
4. Glue tin foil to the back side of the reflector surface. When using also a copy on thicker
cardboard, glue the tin foil on the copy of the reflector and than glue them together and
glue also the copies of the holder together. Use a good kind of glue like Bisonkit transparant.
5. Cut the crosses in the holder with a hobby- or break-knife.
6. Assemble by placing the six tabs of the holder in the six slots of the reflector. Fold the tabs
after placing and fix them with glue.
7. Place the assembly on the WiFi antenna and aim the reflector in the direction of the target
(to WiFi dongle, Router or AP) to get maximum performance.