Professional Documents
Culture Documents
IV Monitor SG 462gb GB WW 1114-1
IV Monitor SG 462gb GB WW 1114-1
IV Monitor SG 462gb GB WW 1114-1
462GB
Vision Sensor
Status NG (red)
Threshold
Matching rate
Monitor Display
Menu OFF
(8)
(9)
(1)
(2)
(10)
(11)
(3)
(4)
(5)
(6)
(9)
(1)
(2)
Stops the running mode and displays the Sensor setup menu
screen.
(10)
(11)
(3)
(12)
(13)
(4)
(14)
(5)
(7)
(15)
(16)
(17)
(18)
(1) Title
Displays the device name, the program number and the program
name.
(2) Tool name
Displays the tool number and the tool name of the tool selected. The
selected tool can be switched.
(3) Brightness correction range
When the Brightness correction is set, the range will be displayed
with a blue frame.
(4) Tool window
Displays the tool window which has been set.
(5) Search Window
If the search window of the tool is set, the range will be displayed
with a light blue frame.
Basic setting
3. Check the image displayed on the monitor and touch the [Register]
button.
4. Set the position, size, and the angle of the tool window. The
detected outline will be displayed in green.
7. Touch the [OK] button.
8. Touch the [Next] button to proceed to STEP2.
Registering the master image
1. After setting the image optimization, press the [Register Live Image
as Master] button.
4. Set the position, size, and the angle of the tool window.
<Color type>
<monochrome type>
3.
11. After the setting is completed, touch the [OK] button. The display will
return to the main screen for the Color Area/Area tool.
Output function
OFF
Total Status
Tot. Status NG
4. Set the position, size, and the angle of the tool window. The
detected outline will be displayed in green.
RUN
BUSY
Error
Pos. Adj.
Tool 1 to 16
Logic 1 to 4
Explanation
No output assigned
When the total status result is OK, the output
is ON.
When the total status result is NG, the output
is ON.
When the sensor is running with no system
error, the output is ON.
While the sensor cannot receive the trigger
signal, the output is ON.
When an error has occurred, the output is ON.
When the position adjustment tool is OK, the
output is ON.
When the result of the tool is OK, the output is
ON.
When the result of the logic is OK, the output is
ON.
Start running
1. Touch the [RUN] button.
1114-1