This document summarizes the steel design of a frame member. It analyzes a top chord bar and bottom chord bar. For the top chord bar, it provides the material properties, cross-sectional properties, internal forces from load case 7, member capacities, and verifies the member meets the code requirements. It then summarizes the same information for the bottom chord bar and verifies it also meets code requirements.
This document summarizes the steel design of a frame member. It analyzes a top chord bar and bottom chord bar. For the top chord bar, it provides the material properties, cross-sectional properties, internal forces from load case 7, member capacities, and verifies the member meets the code requirements. It then summarizes the same information for the bottom chord bar and verifies it also meets code requirements.
This document summarizes the steel design of a frame member. It analyzes a top chord bar and bottom chord bar. For the top chord bar, it provides the material properties, cross-sectional properties, internal forces from load case 7, member capacities, and verifies the member meets the code requirements. It then summarizes the same information for the bottom chord bar and verifies it also meets code requirements.
---------------------------------------------------------------------------------------------------------------------------------------CODE: British Standard BS 5950:2000
ANALYSIS TYPE: Code Group Verification ---------------------------------------------------------------------------------------------------------------------------------------CODE GROUP: 1 TOP CHORDS MEMBER: 1 Simple bar_1 POINT: 3 COORDINATE: x = 0.32 L = 0.68 m ---------------------------------------------------------------------------------------------------------------------------------------LOADS: Governing Load Case: 7 COMB3 1*1.00+4*1.40 ---------------------------------------------------------------------------------------------------------------------------------------MATERIAL S210 py = 210.00 MPa E = 205000.00 MPa ---------------------------------------------------------------------------------------------------------------------------------------SECTION PARAMETERS: RHSH 75*50*3 D=75 mm B=50 mm Ay=286 mm2 Az=428 mm2 A=714 mm2 t=3 mm Iy=553280 mm4 Iz=291442 mm4 Ix=579526 mm4 T=3 mm Wely=14754 mm3 Welz=11658 mm3 ---------------------------------------------------------------------------------------------------------------------------------------INTERNAL FORCES Fc = 2.98 kN My = 2.73 kN*m Mlt = 2.73 kN*m Mymax = 2.73 kN*m Fvz = 3.98 kN mlt = 1.00 my = 0.69 ---------------------------------------------------------------------------------------------------------------------------------------CAPACITIES Pc = 149.94 kN Mcy = 3.77 kN*m Section class = 1 Mey = 3.10 kN*m Pvz = 53.98 kN ---------------------------------------------------------------------------------------------------------------------------------------VERIFICATION FORMULAS: Section check Fc/Pc + My/Mcy = 0.74 < 1.00 (4.8.3.2) Fvz/Pvz = 0.07 < 1.00 (4.2.3) ----------------------------------------------------------------------------------------------------------------------------------------
Section OK
STEEL DESIGN:A FRAME
---------------------------------------------------------------------------------------------------------------------------------------CODE: British Standard BS 5950:2000 ANALYSIS TYPE: Code Group Verification ---------------------------------------------------------------------------------------------------------------------------------------CODE GROUP: 2 BOTTOM CHORDS MEMBER: 3 Simple bar_3 POINT: 3 COORDINATE: x = 1.00 L = 1.46 m ---------------------------------------------------------------------------------------------------------------------------------------LOADS: Governing Load Case: 7 COMB3 1*1.00+4*1.40 ---------------------------------------------------------------------------------------------------------------------------------------MATERIAL S210 py = 210.00 MPa E = 205000.00 MPa ---------------------------------------------------------------------------------------------------------------------------------------SECTION PARAMETERS: SHS 50*50*3 D=50 mm B=50 mm Ay=282 mm2 Az=282 mm2 A=564 mm2 t=3 mm Iy=208492 mm4 Iz=208492 mm4 Ix=313161 mm4 T=3 mm Wely=8340 mm3 Welz=8340 mm3 ---------------------------------------------------------------------------------------------------------------------------------------INTERNAL FORCES Fc = 5.82 kN My = -0.20 kN*m Mlt = -0.20 kN*m Mymax = -0.20 kN*m Fvz = -0.28 kN mlt = 1.00 my = 0.42 ---------------------------------------------------------------------------------------------------------------------------------------CAPACITIES Pc = 118.44 kN Mcy = 2.09 kN*m Section class = 1 Mey = 1.75 kN*m Pvz = 35.53 kN ---------------------------------------------------------------------------------------------------------------------------------------VERIFICATION FORMULAS: Section check Fc/Pc + My/Mcy = 0.14 < 1.00 (4.8.3.2) Fvz/Pvz = 0.01 < 1.00 (4.2.3) ----------------------------------------------------------------------------------------------------------------------------------------
(Human Behavior and Environment 8) Carol M. Werner, Irwin Altman, Diana Oxley (Auth.), Irwin Altman, Carol M. Werner (Eds.) - Home Environments-Springer US (1985)