Professional Documents
Culture Documents
Body Rear End: Section: 9S
Body Rear End: Section: 9S
TABLE OF CONTENTS
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 9S1
Fastener Tightening Specifications . . . . . . . . . . . 9S1
Weatherstrip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9S7
Hatchback Weatherstrip . . . . . . . . . . . . . . . . . . . . 9S7
9S2
9S2
9S2
9S2
9S4
9S5
9S5
9S6
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Application
NSm
LbFt
LbIn
35
27
10
89
38
28
71
53
71
10
89
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the fuel filler door with the screws.
Tighten
Tighten the fuel filler door screws to 4 NSm (35 lbin).
3.
5.
Installation Procedure
1.
Tighten
Tighten the fuel filler door remote cable handle screws
to 10 NSm (89 lbin).
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
7. Install the fuel filler door remote cable handle cover
with the screw.
Tighten
Tighten the fuel filler door remote cable handle cover
screw to 3 NSm (27 lbin).
Tighten
Tighten the lower Bpillar seat belt anchor bolt to 38
NSm (28 lbft).
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1.
Tighten
Tighten the rear deck lid bolts to 10 NSm (89 lbin).
2.
3.
4.
Installation Procedure
1.
2.
Installation Procedure
1.
2.
3.
Tighten
Tighten the luggage compartment lock cylinder nut to
8 NSm (71 lbin).
Installation Procedure
1.
Tighten
Tighten the luggage compartment lock striker bolts to
8 NSm (71 lbin).
3.
Installation Procedure
1. Connect the lock rod.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
2. Install the luggage compartment lock with the
screws.
Tighten
3.
4.
5.
WEATHERSTRIP
Removal Procedure
1.
2.
Installation Procedure
1.
2.
3.
HATCHBACK WEATHERSTRIP
Removal Procedure
1.
2.
3.
J4D39S01
Installation Procedure
1.
2.
3.
4.
J4D39S01
HATCHBACK DOOR
Removal Procedure
1.
2.
3.
4.
J4D39S02
Installation Procedure
1.
With the aid of another technician, install the hatchback door to the hinges with the bolts.
Tighten
Tighten the hatchback door hinge bolts to 20 NSm (15
lbft).
2.
3.
J4D39S02
4.
Installation Procedure
1.
Install the gas support assembly onto the hatchback door and the body.
Tighten
2.
Installation Procedure
1.
2.
Tighten
3.
4.
J4D39S04
Installation Procedure
1.
2.
Tighten
3.
4.
J4D39S04
GENERAL DESCRIPTION
AND SYSTEM OPERATION
HATCHBACK DOOR
The fuel filler door attaches to the fuel tank pocket on the
right side of the vehicle. The door is opened by pulling on
the fuel filler door remote handle located on the floor in
front of the drivers seat.