The document is a data sheet from company Z-Tech S.A.C requesting information about a conveyor system to design a tramp metal detector application. It requests details about the conveyed material, conveyor specifications, available power, dimensional data with a diagram, and any special operating conditions. The standard minimum catch size for tramp metal is listed as 1" x 1" x 1".
The document is a data sheet from company Z-Tech S.A.C requesting information about a conveyor system to design a tramp metal detector application. It requests details about the conveyed material, conveyor specifications, available power, dimensional data with a diagram, and any special operating conditions. The standard minimum catch size for tramp metal is listed as 1" x 1" x 1".
The document is a data sheet from company Z-Tech S.A.C requesting information about a conveyor system to design a tramp metal detector application. It requests details about the conveyed material, conveyor specifications, available power, dimensional data with a diagram, and any special operating conditions. The standard minimum catch size for tramp metal is listed as 1" x 1" x 1".
Address Av. Del Ejercito 749 Of 301 City LIMA State Phone 993532560 Fax Attention of Dan Hidalgo Quinto
Date 18/07/2016 PERU
Zip dhidalgo@z-tech.pe
E-Mail Project
CONVEYOR DATA (CONV. NO. __________ )
Material Conveyed Magnetite? Normal Burden Depth Belt Width Belt Speed Fixed Metal Splices or Repair Clips Used? Metal Skirt Boards Used? Power Available 115 VAC 230 VAC Spacing Between Idlers in Coil Area Tramp Metal Minimum Catch Size
Max. Lump Size
Max Depth Belt Type Variable
50 HZ
60 HZ Inches 1 x 1 x 1 is Standard
PLEASE COMPLETE THE DIMENSIONAL DATA BELOW
SPECIAL NOTE: Please attach conveyor profile drawing. Indicate on sketch which side of Conveyor the junction box or electronics are to be mounted. A. ________________________ B. ________________________ C. ________________________ D. ________________________ E. ________________________ F. ________________________ G. ________________________ H. ________________________