Professional Documents
Culture Documents
Iot Systems Challenges
Iot Systems Challenges
Iot Systems Challenges
Testing Capabilities
and
Instrumentation Strategies
Agenda
11.08.2015
Folie 2
unclassified
PIMPF
Penetrator Charge
Precursor
Shaped Charge
11.08.2015
unclassified
Folie 3
-
Page 3 -
TDW GmbH
11.08.2015
Folie 4
unclassified
11.08.2015
Folie 5
unclassified
11.08.2015
Folie 6
NAWC-WD
AFRL-MN
Northrop Grumman
SAIC
DTRA
NAWC-WD
AFRL-MN
PMA-280
unclassified
Agenda
11.08.2015
Folie 7
unclassified
The task of a hard target fuze is to initiate the Warhead inside of the target at the desired location.
The key requirement on components in a hard target
fuze is to survive and operate during the shock or
even the sequence of multiple shocks.
Outer Casing
Inner Casing
Detonator
Potting
11.08.2015
Folie 8
unclassified
PCB Boards
Booster High
Explosive
Agenda
11.08.2015
Folie 9
unclassified
(Centrifuge*)
(Shaker*)
Drop Table*
Gas gun*
Explosives
Sled
Shock
30g
500g
20000g
20000g
100000g
Number of tests
unlimited
unlimited
15 per hour
3 per hour
1 per day
Number of tests
Cost
11.08.2015
Folie 10
unclassified
Drop Table
11.08.2015
Folie 11
unclassified
Gas Gun
11.08.2015
Powered device
Velocity measurement at muzzle
Velocity measurement near target via electric eye
High speed video
Integrated sensors
Folie 12
unclassified
Sled
Acceleration distance
Mass of system including sled
Transport of high explosive
Target dimension
End diagnostic
11.08.2015
Folie 13
unclassified
160 m
60 kg (up to 190 kg)
5kg
4x4x4m
High speed video and/or flash x-ray
Agenda
11.08.2015
Folie 14
unclassified
End-to-End
System Test
11.08.2015
Folie 15
unclassified
Test objective:
Determination of shock characteristic and
shock limit of the new component when
powered (under real condition).
Two capacitors (A and B) are charged and
shocked.
11.08.2015
Folie 16
unclassified
Components shocked
stepwise from 2000g to
18000g.
Part A survived each shock.
The capacitor was charged
prior, during and after the
impact.
Part B survived the shock till
4000g. By shocks higher than
4000g was the capacitor
discharged after the shock.
Part B is now classified as
shock sensitive.
11.08.2015
Folie 17
unclassified
Agenda
11.08.2015
Folie 18
unclassified
Conclusion
11.08.2015
Folie 19
unclassified
Contact
11.08.2015
Folie 20
unclassified