Professional Documents
Culture Documents
Limiting LM662
Limiting LM662
Introduction.
The Nomad Factory LM-662 Dual Limiting Amplifier is a recreation of the classic Fairchild 670 limiter.
When using the LM-662, music and instruments reacts the same as a Fairchild 670 does.
The Nomad Factory LM-662 Dual Limiting Amplifier is built to be a new classic by adding that vintage
warmth and realism to the most demanding studio tracks.
- Useful as a limiter or a compressor depending on the program material and control settings.
- Exceptional tone and musical focus.
- Dual channel (dual mono) - A/B with individual controls.
- Extremely fast attack time with variable release time from .3 seconds to 10 seconds.
LM-662 Features:
Compression Ratio:
!!1:1 to 1:20
Attack Time:
!!0.2, 0.4, 0.8, 20, 80, 100, 120, 300 ms
Release Time:
!!300 ms, 800 ms, 1 sec, 2 sec, 5 sec, 10 sec
Tube Emulation:
!!(1) 12AX7
Controls:
!!Input Level, Threshold, Attack/Release Time, DC Adjust, Gain Control, Tube Emulation and Link Control
Factory Presets:
!!Yes
Input Level:
- Controls the input level to the compressor : -120dB + 24dB
Threshold:
- Sets the threshold level above which the device begins to compress the signal : 0dB -70dB
Turning the Threshold to the left = less compression
Turning the Threshold to the right = more compression
2- Attack/Release Time:
DC Adjust:
On an original Fairchild, this was called DC Threshold and was on the rear of the unit (not
accessible from front panel).
We labeled that control DC Adjust to not confuse with the Threshold control. The DC Adjust lets
you adjust the Knee/Ratio of the LM-662. You are able to control how the amplifier reacts to the
audio signal coming in. By turning the DC Adjust to the left, the LM-662 acts more like a
'compressor', by turning the DC Adjust to the right, the LM-662 acts more like a 'limiter'.
The best thing about the DC Adjust is you can find that magic spot in-between.
Gain Control:
- Controls the LM-662 output level in dB : -60dB / +24dB
This control allows the two sets of controls to be linked. If the controls are given an offset while
unlinked, the offset between controls is NOT preserved when the controls are linked.
5- VU-Meter:
All new Nomad Factory plug-ins share a new common feature, the Nomad Factory MenuBar.
Since the Nomad Factory MenuBar is the same on practically all new Nomad Factory plug-ins, you will
always know how to load, save, initialize presets of a Nomad Factory plug-in.
Preset Menu:
1) Init Current Preset:
Initialize the current selected preset.
2) Save Program:
Allows saving presets in the Nomad Factory file format to the disk.
3) Save Bank:
Allows saving banks in the Nomad Factory file format to the disk.
4) Load Program:
Allows reading and recalling presets from files.
5) Load Bank:
Allows reading and recalling banks from files.
Pressing the 'Welcome' menu will display the included factory presets.
Utility Menu:
If you are connected to the internet, using this menu will launch a browser and will navigate to the
Nomad Factory website pages.