Professional Documents
Culture Documents
Design and Fabrication of Sheet Cutting Machine (Hydraulic Type) (Capacity 2ton)
Design and Fabrication of Sheet Cutting Machine (Hydraulic Type) (Capacity 2ton)
MACHINE(HYDRAULIC TYPE)
(CAPACITY 2TON)
SYNOPSIS
Sheet cutting machine hydraulic type is used to cut the sheets into
two pieces by hydraulic power, there is no need of human effect
for this machine .This machine has bottom blade and top blade,
where bottom blade is fixed one and top blade is moved by a
hydraulic cylinder, remaining structures are made of forged steel
and cutting blades are made of HcHcr steel.
Working
This machine has a hydraulic cylinder and piston assembly. Which
works in a port type integrated hydraulic circuit. I this circuit there
is no need for separate oil pump hydraulic houses, D.C valves,
Pumps etc. These all those things are integrated with the hydraulic
cylinder itself
Hydraulic pump
Hydraulic line
Structure
Hydraulic cylinder
Upper knife
Bottom knife
Principle of working
Pascal's law is the basis of hydraulic drive systems.
As the pressure in the system is the same, the
force that the fluid gives to the surroundings is
therefore equal to pressure x area. In such a way, a
small piston feels a small force and a large piston
feels a large force.
ADVANTAGES
1. It eliminates complicated parts like hydraulic cylinder pipe
connections and pressure tubes.
2. Fluid Power transmitted through port so high efficient.
3. Control of system is easier
4. Maintenance cost is less
5. Can be achieved up to two ton force.
In this Hydraulic system lubricating system not necessary so that wear and
tear very low.
APPLICATION
1. Engine recondition works
2. Pump assembling works
3. A/C &D/C Motor repair works.