Professional Documents
Culture Documents
Steel Design Checklist in STAAD
Steel Design Checklist in STAAD
Steel Design Checklist in STAAD
STEEL DESIGN
1. Generate model geometry
2. Node and beam labels
3. Specify member properties
a. Dimensions
b. Check or uncheck
materials
c. Assign to beam and
column
4. Specify material constant
a. Elasticity
b. Density
c. Poisson
d. Alpha
e. Assign
5. Specify member off set (if
necessary)
6. Printing member information
in the output file
a. Select | By All | All Beams
b. Commands | Pre Analysis
Print | Member
Information
c. To view
7. Specify support
8. Specify loads
a. Dead loads
b. Live Loads
c. Repetition
d. Combination
e. Assign
9. Specify analysis type
a. Analysis/Print
b. Perform Analysis (for 2D)
c. Statics Check
d. Add
10.Specifying post analysis
command
a. Analysis/Print
b. Post-Print
c. Select all the members
d. Define Commands
d. Select the Member Forces
|Add |Assign
e. Support Reactions |Add |
Assign
11.Shortlisting of loads
12.Specify design parameters
a. Code AISC
b. FYLD
c. UNT
d. UNB
e. TRACK
f. SELECT
13.Run analysis
CONCRETE DESIGN
1.