Professional Documents
Culture Documents
Lesson X: Details of Transverse Tension and Guided Bend Tests
Lesson X: Details of Transverse Tension and Guided Bend Tests
Lesson X: Details of Transverse Tension and Guided Bend Tests
1 dari 1
Lesson 1
The Basics of Arc
Welding
http://www.esabna.com/euweb/AWTC/Lesson10_16.htm
LESSON X
specimen will spring back to about the angle shown in Figure 5. In face and root bends,
defects in the surface of the weld are exposed as cracks, tears, or porosity.
Lesson 2
Common Electric
Arc Welding
Processes
Lesson 3
Covered Electrodes
for Welding
Mild Steels
Lesson 4
Covered Electrodes
for Welding Low
Alloy Steels
10.9.4.1.2
Current
Chapter
Table of
Contents
Side bend tests are similar to face and root bend tests, except they are bent
so the side of the weld is on the outside or convex surface of the specimen. Side bends
expose defects in the interior and fusion zone of the weld.
Go To Test
10.9.4.2
test and longitudinal guided bend test may appear separately in some specifications; how-
ever, it is shown here (Figure 6) as they appear in AWS A5.20-95 (applicable only to the
single-pass electrodes of the E70T-2, E70T-3, E70T-10, and E70T-GS classifications.)
Glossary
Lesson 5
Welding Filler Metals
for Stainless Steels
Turn Pages
Lesson 6
Carbon & Low Alloy
Steel Filler Metals GMAW,GTAW,SAW
Search
Chapter
(Faster
Download)
Lesson 7
Flux Cored Arc
Electrodes Carbon
Low Alloy Steels
Lesson 8
Hardsurfacing
Electrodes
Lesson 9
Estimating &
Comparing Weld
Metal Costs
Search
Document
(Slower
Download)
10.9.4.2.1
for single-pass electrodes because in single-pass welds, the weld metal is always substantially diluted with the base metal. The bend test is prescribed for these electrodes because
they contain relatively high amounts of manganese and silicon that can reduce ductility
somewhat, and can cause cracking in the weld area when present in excessive amounts.
Lesson 10
Reliability of Welding
Filler Metals
COPYRIGHT 2000 THE ESAB GROUP, INC.
09/12/2013 14:42