Professional Documents
Culture Documents
International Organization For Standardization Standards
International Organization For Standardization Standards
This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of
all the ISO standards, see the ISO catalogue.[1]
The standards are protected by copyright and most of them must be purchased. However about 300 of the standards produced by ISO and IEC's Joint Technical
Committee 1 (JTC1) have been made freely and publicly available.[2]
Contents
1 ISO 1 ISO 99
2 ISO 100 ISO 199
3 ISO 200 ISO 999
4 ISO 1000 ISO 4999
5 ISO 5000 ISO 9999
6 ISO 10000 ISO 14999
7 ISO 15000 ISO 19999
8 ISO 20000 ISO 29999
9 ISO 30000 ISO 49999
10 ISO 50000 - ISO 59999
11 ISO 80000
12 See also
13 Notes
14 References
15 External links
ISO 1 ISO 99
ISO 1:2002 Geometrical Product Specifications (GPS) Standard reference temperature for geometrical product specification and verification
ISO 2:1973 Textiles Designation of the direction of twist in yarns and related products
ISO 3:1973 Preferred numbers Series of preferred numbers
ISO 4:1997 Information and documentation Rules for the abbreviation of title words and titles of publications
ISO 5 Photography and graphic technology Density measurements
ISO 6:1993 Photography Black-and-white pictorial still camera negative film/process systems Determination of ISO speed
ISO 7 Pipe threads where pressure-tight joints are made on the threads
ISO 8:1977 Documentation Presentation of periodicals
ISO 9:1995 Information and documentation Transliteration of Cyrillic characters into Latin characters Slavic and non-Slavic languages
ISO 11:1987 Aircraft Ground pressure testing connections for pressure cabins
ISO 12:1987 Aerospace Pipelines Identification
ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering Dimensions, tolerances and verification
ISO 15:2011 Radial bearingsBoundary dimensions, general plan
ISO 16:1975 Acoustics Standard tuning frequency (Standard musical pitch)
ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
ISO 18:1981 Documentation Contents list of periodicals
ISO 21:1985 Shipbuilding Inland navigation Cable-lifters for stud-link anchor chains
ISO 22:1991 Belt drives Flat transmission belts and corresponding pulleys Dimensions and tolerances
ISO 23:1993 CinematographyCamera usage of 35 mm motion-picture filmSpecifications
ISO 25:1994 CinematographyCamera usage of 16 mm motion-picture filmSpecifications
ISO 26:1993 CinematographyProjector usage of 16 mm motion-picture films for direct front projectionSpecifications
ISO 28:1976 CinematographyCamera usage of 8 mm Type R motion-picture filmSpecifications
ISO 29:1980 CinematographyProjector usage of 8 mm Type R silent motion-picture film for direct front projectionSpecifications [Withdrawn
without replacement]
ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]
ISO 32:1977 Gas cylinders for medical useMarking for identification of content
ISO 34
ISO 34-1:2010 Rubber, vulcanized or thermoplasticDetermination of tear strengthPart 1: Trouser, angle and crescent test pieces
ISO 34-2:2011 Rubber, vulcanized or thermoplasticDetermination of tear strengthPart 2: Small (Delft) test pieces
ISO 35:2004 Natural rubber latex concentrateDetermination of mechanical stability
ISO 36:2011 Rubber, vulcanized or thermoplasticDetermination of adhesion to textile fabrics
ISO 37:2011 Rubber, vulcanized or thermoplastic Determination of tensile stress-strain properties
ISO 41:1980 ShipbuildingInland vesselsCovers for deck openings for pumps [withdrawn without replacement]
ISO 43:1976 AircraftJacking pads
ISO 44:1975 AerospaceLever-operated, two-position, ON/OFF switchesDirections of operation
ISO 45:1990 AircraftPressure refuelling connections
ISO 46:1973 AircraftFuel nozzle grounding plugs and sockets
ISO 48:2010 Rubber, vulcanized or thermoplasticDetermination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 100:1984 Pulleys for flat transmission beltsCrowns [Withdrawn: replaced with ISO 22]
ISO 102:1990 AircraftGravity filling orifices
ISO 104:2002 Rolling bearingsThrust bearingsBoundary dimensions, general plan
ISO 105 Textiles Tests for colour fastness
ISO 105-A01:2010 Part A01: General principles of testing
ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
ISO 105-A03:1993 Part A03: Grey scale for assessing staining
ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight
ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure
ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
ISO 105-B10:2011 Part B10: Artificial weatheringExposure to filtered xenon-arc radiation
ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a
low-temperature bleach activator
ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial launderingOxidative bleach response using a non-phosphate reference
detergent incorporating a low temperature bleach activator
ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents
ISO 105-E01:2013 Part E01: Colour fastness to water
ISO 105-E02:2013 Part E02: Colour fastness to sea water
ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
ISO 105-E04:2013 Part E04: Colour fastness to perspiration
ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
ISO 105-E08:1994 Part E08: Colour fastness to hot water
ISO 105-E09:2010 Part E09: Colour fastness to potting
ISO 105-E10:1994 Part E10: Colour fastness to decatizing
ISO 105-E11:1994 Part E11: Colour fastness to steaming
ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxides
ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
ISO 105-J03:2009 Part J03: Calculation of colour differences
ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant
(CMCCON02)
ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
ISO 105-N05:1993 Part N05: Colour fastness to stoving
ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
ISO 105-X08:1994 Part X08: Colour fastness to degumming
ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
ISO 216:2007 Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction
ISO 226:2003 Acoustics Normal equal-loudness-level contours
ISO 228 Pipe threads where pressure-tight joints are not made on the threads
ISO 233 Information and documentation Transliteration of Arabic characters into Latin characters[Note 3]
ISO 259 Information and documentation Transliteration of Hebrew characters into Latin characters[Note 3]
ISO 261 ISO general purpose metric screw threads General plan
ISO 262 ISO general purpose metric screw threads Selected sizes for screws, bolts and nuts
ISO 286-1 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
ISO 286-2 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and
limit deviations for holes and shafts
ISO 361 Basic ionizing radiation symbol
ISO 500 Agricultural tractors Rear-mounted power take-off types 1, 2 and 3
ISO 518:2006 Photography Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units
Specification
ISO 519:1992 Photography Hand-held cameras Flash-connector dimensions
ISO 639 Codes for the representation of names of languages
ISO 639-1 Alpha-2 code
ISO 639-2 Alpha-3 code
ISO 639-3 Alpha-3 code for comprehensive coverage of languages
ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application guidelines
ISO 639-5 Alpha-3 code for language families and groups
ISO 639-6 Alpha-4 code for comprehensive coverage of language variants
ISO/IEC 646 Information technology ISO 7-bit coded character set for information interchange
ISO 657 Hot-rolled steel sections
ISO 668 Series 1 freight containers Classification, dimensions and ratings
ISO 690 Information and documentation Guidelines for bibliographic references and citations to information resources
ISO 704 Terminology work Principles and methods
ISO 732 Photography 120-size and 220-size films Dimensions
ISO 764 Horology Magnetic resistant watches
ISO 760:1978 Determination of water - Karl Fischer method (General method)
ISO 787 General methods of test for pigments and extenders
ISO 787-9:1981 Determination of pH value of an aqueous suspension
ISO 838 Paper Holes for general filing purposes Specifications
ISO 843:1997 Information and documentation Conversion of Greek characters into Latin characters
ISO 860 Terminology work Harmonization of concepts and terms
ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3]
ISO 965 ISO general purpose metric screw threads Tolerances
ISO 999 Information and documentation Guidelines for the content, organization, and presentation of indexes
ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17]
ISO 1004 Information processing Magnetic ink character recognition Print specifications
ISO 1007 Photography 135-size film and magazine Specifications
ISO 1101 Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out
ISO 1182 Reaction to fire tests for products -- Non-combustibility test
ISO 1217 Displacement compressors -- Acceptance tests
ISO 1222 Photography Tripod connections
ISO 1268 Fibre-reinforced plastics Methods of producing test plates
ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO/IEC 1539 Information technology Programming languages Fortran
ISO 1629 Rubber and latices Nomenclature
ISO 1663 Rigid cellular plastics Determination of water vapour transmission properties
ISO 1745 Information processing Basic mode control procedures for data communication systems
ISO 1750 Pesticides and other agrochemicals Common names
ISO 1928 Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
ISO/IEC 2022 Information technology Character code structure and extension techniques
ISO 2108 Information and documentation International standard book number (ISBN)
ISO 2145 Documentation Numbering of divisions and subdivisions in written documents
ISO 2162 Technical product documentation Springs
ISO 2162-1 Simplified representation
ISO 2162-2 Presentation of data for cylindrical helical compression springs
ISO 2171 Cereals, pulses and by-products Determination of ash yield by incineration
ISO 2240:2003 Photography Colour reversal camera films Determination of ISO speed
ISO 2848:1984 Building construction - Modular coordination - Principles and rules
ISO 2533 Standard Atmosphere
ISO 2692 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement
(LMR) and reciprocity requirement (RPR)
ISO 2709 Information and documentation Format for information exchange
ISO 2768 General tolerances
ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications
ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
ISO 2852 Stainless steel clamp pipe couplings for the food industry
ISO 3002 Basic quantities in cutting and grinding
ISO 3082 Iron ores Sampling and sample preparation procedures
ISO 3098 Technical product documentation Lettering
ISO 3103 Tea Preparation of liquor for use in sensory tests
ISO 3166 Codes for the representation of names of countries and their subdivisions
ISO 3166-1 Country codes
ISO 3166-2 Country subdivision code
ISO 3166-3 Code for formerly used names of countries
ISO 3297 Information and documentation International standard serial number (ISSN)
ISO 3394 Dimensions of rigid rectangular packages Transport packages
ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
ISO 3534 Statistics Vocabulary and symbols
ISO 3534-1 General statistical terms and terms used in probability
ISO 3534-2 Applied statistics
ISO 3534-3 Design of experiments
ISO 3534-4 Survey sampling
ISO 3536 Road vehicles Safety glazing materials Vocabulary
ISO 3537 Road vehicles Safety glazing materials Mechanical tests
ISO 3538 Road vehicles Safety glazing materials Test methods for optical properties
ISO 3591 - Sensory analysis Apparatus Wine-tasting glass
ISO 3601 Fluid power systems O-rings
ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
ISO 3601-2 Housing dimensions for general applications
ISO 3601-3 Quality acceptance criteria
ISO 3601-4 Anti-extrusion rings (back-up rings)
ISO 3601-5 Suitability of elastomeric materials for industrial applications
ISO 3602 Documentation Romanization of Japanese (kana script)
ISO 3632 Spices Saffron (Crocus sativus L.)[Note 3]
ISO 3635:1981 Size designation of clothes Definitions and body measurement procedure
ISO 3676 Packaging Unit load sizes Dimensions
ISO 3690 Welding and allied processes Determination of hydrogen content in arc weld metal
ISO 3864 Graphical symbols Safety colours and safety signs
ISO 3901 Information and documentation International Standard Recording Code (ISRC)
ISO 3977 Gas turbines Procurement
ISO 4074 Natural latex rubber condoms Requirements and test methods
ISO 4157 Construction drawings Designation systems
ISO 4165 Road vehicles Electrical connections Double-pole connection
ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines Cement mortar lining
ISO 4217 Codes for the representation of currencies and funds
ISO 4314 Surface active agents Determination of free alkalinity or free acidity Titrimetric method
ISO 4578 Adhesives Determination of peel resistance of high-strength adhesive bonds Floating-roller method
ISO 4582 Plastics Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or
laboratory light sources
ISO 4587 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 4628 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes
in appearance
ISO 4628-1 General introduction and designation system
ISO 4628-2 Assessment of degree of blistering
ISO 4628-3 Assessment of degree of rusting
ISO 4628-4 Assessment of degree of cracking
ISO 4628-5 Assessment of degree of flaking
ISO 4628-6 Assessment of degree of chalking by tape method
ISO 4628-7 Assessment of degree of chalking by velvet method
ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
ISO 8090 Cycles Terminology
ISO 8180 Ductile iron pipelines Polyethylene sleeving for site application
ISO 8373 Manipulating industrial robots Vocabulary
ISO 8501 Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness
ISO 8559:1989 Garment construction and anthropometric surveys Body dimensions
ISO 8573 Compressed air
ISO 8573-1 Contaminants and purity classes
ISO 8573-2 Test methods for oil aerosol content
ISO 8573-3 Test methods for measurement of humidity
ISO 8573-4 Test methods for solid particle content
ISO 8573-5 Test methods for oil vapour and organic solvent content
ISO 8573-6 Test methods for gaseous contaminant content
ISO 8573-7 Test method for viable microbiological contaminant content
ISO 8573-8 Test methods for solid particle content by mass concentration
ISO 8573-9 Test methods for liquid water content
ISO 8583 Financial transaction card originated messages Interchange message specifications
ISO 8583-1 Messages, data elements and code values
ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
ISO 8583-3 Maintenance procedures for messages, data elements and code values
ISO 8601 Data elements and interchange formats Information interchange Representation of dates and times
ISO/IEC 8613 Information technology Open Document Architecture (ODA) and interchange format
ISO/IEC 8632 Information technology Computer graphics Metafile for the storage and transfer of picture description information
ISO/IEC 8632-1 Functional specification
ISO/IEC 8632-2 Character encoding
ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]
ISO/IEC 8632-4 Clear text encoding
ISO 8651 Information technology Computer graphics Graphical Kernel System (GKS) language bindings[Note 3]
ISO/IEC 8652 Information technology Programming languages Ada
ISO 8653:1986 Jewellery Ring-sizes Definition, measurement and designation
ISO 8691 Petroleum products Low levels of vanadium in liquid fuels Determination by flameless atomic absorption spectrometry after ashing
ISO 8805 Information processing systems Computer graphics Graphical Kernel System for Three Dimensions (GKS-3D) functional description
ISO/IEEC 8806 Information technology Computer graphics Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
ISO/IEEC 8806-4 C
ISO 8807 Information processing systems Open Systems Interconnection LOTOS A formal description technique based on the temporal ordering of
observational behaviour
ISO/IEC 8824 Information technology Abstract Syntax Notation One (ASN.1)
ISO/IEC 8825 Information technology ASN.1 encoding rules
ISO/IEC 8859 Information technology 8-bit single-byte coded graphic character sets
ISO/IEC 8859-1 Latin alphabet No. 1
ISO/IEC 8859-2 Latin alphabet No. 2
ISO/IEC 8859-3 Latin alphabet No. 3
ISO/IEC 8859-4 Latin alphabet No. 4
ISO/IEC 8859-5 Latin/Cyrillic alphabet
ISO/IEC 8859-6 Latin/Arabic alphabet
ISO/IEC 8859-7 Latin/Greek alphabet
ISO/IEC 8859-8 Latin/Hebrew alphabet
ISO/IEC 8859-9 Latin alphabet No. 5
ISO/IEC 8859-10 Latin alphabet No. 6
ISO/IEC 8859-11 Latin/Thai alphabet
ISO/IEC 8859-13 Latin alphabet No. 7
ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)
ISO/IEC 8859-15 Latin alphabet No. 9
ISO/IEC 8859-16 Latin alphabet No. 10
ISO 8879 Information processing Text and office systems Standard Generalized Markup Language (SGML)
ISO 9000 Quality management systems Fundamentals and vocabulary
ISO 9001 Quality management systems Requirements
ISO 9004 Managing for the sustained success of an organization A quality management approach
ISO 9050 Glass in building Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance
and related glazing factors
ISO 9069 Information processing SGML support facilities SGML Document Interchange Format (SDIF)
ISO/IEC 9075 Information technology Database languages SQL
ISO/IEC 9126 Software engineering Product quality
ISO 9141 Road vehicles Diagnostic systems[Note 3]
ISO 9141-2 CARB requirements for interchange of digital information
ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
ISO 9241 Ergonomics of human-system interaction
ISO/IEC 9293 Information technology Volume and file structure of disk cartridges for information interchange
ISO 9362 Banking Banking telecommunication messages Business identifier code (BIC)
ISO 9407 Shoe sizes Mondopoint system of sizing and marking
ISO 10001:2007 Quality management Customer satisfaction Guidelines for codes of conduct for organizations
ISO 10002:2014 Quality management Customer satisfaction Guidelines for complaints handling in organizations
ISO 10003:2007 Quality management Customer satisfaction Guidelines for dispute resolution external to organizations
ISO 10004:2008 Quality management Customer satisfaction Guidelines for monitoring and measuring
ISO 10005:2005 Quality management systems Guidelines for quality plans
ISO 10006:2003 Quality management systems Guidelines for quality management in projects
ISO 10007:2003 Quality management systems Guidelines for configuration management
ISO 10012:2003 Measurement management systems Requirements for measurement processes and measuring equipment
ISO/TR 10013:2001 Guidelines for quality management system documentation
ISO 10014:2006 Quality management Guidelines for realizing financial and economic benefits
ISO 10015:1999 Quality management Guidelines for training
ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
ISO 10018:2012 Quality management Guidelines on people involvement and competence
ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
ISO/IEC 10021 Information technology Message Handling Systems (MHS)
ISO/IEC 10026 Information technology Open Systems Interconnection
ISO 10077 Thermal performance of windows, doors and shutters Calculation of thermal transmittance
ISO/IEC 10089 Information technology 130 mm rewritable optical disk cartridge for information interchange
ISO/IEC 10116 Information technology Security techniques Modes of operation for an n-bit block cipher
ISO/IEC 10118 Information technology Security techniques Hash-functions
ISO 10160 Information and documentation Open Systems Interconnection Interlibrary Loan Application Service Definition
ISO 10161 Information and documentation Open Systems Interconnection Interlibrary Loan Application Protocol Specification
ISO/IEC 10164 Information technology Open Systems Interconnection Systems Management
ISO/IEC 10179:1996 Information technology Processing languages Document Style Semantics and Specification Language (DSSSL)
ISO/IEC 10206 Information technology Programming languages Extended Pascal
ISO 10211 Thermal bridges in building construction Heat flows and surface temperatures Detailed calculations
ISO 10218 Robots and robotic devices Safety requirements for industrial robots
ISO/IEC 10279 Information technology Programming languages Full BASIC
ISO 10303 Industrial automation systems and integration Product data representation and exchange
ISO 10380 Pipework Corrugated metal hoses and hose assemblies
ISO 10383 Securities and related financial instruments Codes for exchanges and market identification (MIC)
ISO 10456 Building materials and products Hygrothermal properties Tabulated design values and procedures for determining declared and design
thermal values
ISO 10487 Passenger cars Connections for car radios[Note 3]
ISO 14801 Dentistry Implants Dynamic fatigue test for endosseous dental implants
ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions Method by analysis of
evolved carbon dioxide
ISO 14855-1:2005 General method
ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO/IEC 14882 Programming Languages C++
ISO 14915 Software ergonomics for multimedia user interfaces
ISO 14915-1:2002 Design principles and framework
ISO 14915-2:2003 Multimedia navigation and control
ISO 14915-3:2002 Media selection and combination
ISO 14971:2007 Medical devices Application of risk management to medical devices
ISO/IEC 14977 Information technology Syntactic metalanguage Extended BNF
ISO/IEC TS 17021-2:2012 Conformity assessmentRequirements for bodies providing audit and certification of management systemsPart 2:
Competence requirements for auditing and certification of environmental management systems
ISO/IEC TS 17021-3:2013 Conformity assessmentRequirements for bodies providing audit and certification of management systemsPart 3:
Competence requirements for auditing and certification of quality management systems
ISO/IEC TS 17021-4:2013 Conformity assessmentRequirements for bodies providing audit and certification of management systemsPart 4:
Competence requirements for auditing and certification of event sustainability management systems
ISO/IEC TS 17021-5:2014 Conformity assessmentRequirements for bodies providing audit and certification of management systemsPart 5:
Competence requirements for auditing and certification of asset management systems
ISO/IEC TS 17022:2012 Conformity assessmentRequirements and recommendations for content of a third-party audit report on management systems
ISO/IEC TS 17023:2013 Conformity assessmentGuidelines for determining the duration of management system certification audits
ISO/IEC 17024:2003 Conformity assessment General requirements for bodies operating certification of persons
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 17088:2012 Specifications for compostable plastics
ISO 17100:2015 Translation servicesRequirements for translation services
ISO 17202 Textiles Determination of twist in single spun yarns Untwist/retwist method
ISO/PAS 17506 Industrial automation systems and integration COLLADA digital asset schema specification for 3D visualization of industrial data
ISO 17776 Petroleum and natural gas industries Offshore production installations Guidelines on tools and techniques for hazard identification and
risk assessment
ISO 17799 - Code of Practice for Information Security Management (superseded by ISO/IEC 27002)
ISO 17894 Ships and marine technology Computer applications General principles for the development and use of programmable electronic systems
in marine applications
ISO/IEC 18000 Information technology Radio frequency identification for item management
ISO/IEC 18000-1 Reference architecture and definition of parameters to be standardized
ISO/IEC 18000-2 Parameters for air interface communications below 135 kHz
ISO/IEC 18000-3 Parameters for air interface communications at 13,56 MHz
ISO/IEC 18000-4 Parameters for air interface communications at 2,45 GHz
ISO/IEC 18000-6 Parameters for air interface communications at 860 MHz to 960 MHz
ISO/IEC 18000-7 Parameters for active air interface communications at 433 MHz
ISO/IEC 18004 Information technology Automatic identification and data capture techniques QR Code 2005 bar code symbology specification
ISO/IEC 18009 Information technology Programming languages Ada: Conformity assessment of a language processor
ISO/IEC 18013 Information technology Personal identification ISO-compliant driving license
ISO/IEC 18013-1:2005 Physical characteristics and basic data set
ISO/IEC 18013-2:2008 Machine-readable technologies
ISO/IEC 18013-3:2009 Access control, authentication and integrity validation
ISO/IEC 18014 Information technology Security techniques Time-stamping services
ISO/IEC 18023 Information technology SEDRIS
ISO/IEC 18024-4:2006 Information technology SEDRIS language bindings Part 4: C
ISO/IEC 18025:2005 Information technology Environmental Data Coding Specification (EDCS)
ISO/IEC 18026 Information technology Spatial Reference Model (SRM)
ISO/IEC 18033 Information technology Security techniques Encryption algorithms
ISO/IEC 18033-1 General
ISO/IEC 18033-2 Asymmetric ciphers
ISO/IEC 18033-3 Block ciphers
ISO/IEC 18033-4 Stream ciphers
ISO/IEC 18041-4 Information technology Computer graphics, image processing and environmental data representation Environmental Data Coding
Specification (EDCS) language bindings Part 4: C
ISO/IEC 18042-4:2006 Information technology Computer graphics and image processing Spatial Reference Model (SRM) language bindings Part
4: C
ISO/IEC 18092 Information technology Telecommunications and information exchange between systems Near Field Communication Interface and
Protocol (NFCIP-1)
ISO 18117:2009 Surface chemical analysis Handling of specimens prior to analysis
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally
determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/TS 18152 Ergonomics of human-system interaction Specification for the process assessment of human-system issues
ISO 18185 Freight containers Electronic seals
ISO 18245 Retail financial services Merchant category codes
ISO/TR 18529:2000 Ergonomics Ergonomics of human-system interaction Human-centred lifecycle process descriptions
ISO 18541 Road vehicles Standardized access to automotive repair and maintenance information (RMI)
ISO 18629 Industrial automation systems and integration Process specification language
ISO 19005 Document management Electronic document file format for long-term preservation
ISO 19011:2011 Guidelines for auditing management systems
ISO 19092 Financial services Biometrics Security framework
ISO 19101 Geographic information Reference model
ISO/TS 19103 Geographic information Conceptual schema language
ISO/TS 19104 Geographic information Terminology
ISO 19105 Geographic information Conformance and testing
ISO 19106 Geographic information Profiles
ISO 19107 Geographic information Spatial schema
ISO 19108 Geographic information Temporal schema
ISO 19109 Geographic information Rules for application schema
ISO 19110 Geographic information Methodology for feature cataloguing
ISO/IEC 27004 Information technology Security techniques Information security management Measurement
ISO/IEC 27005 Information technology Security techniques Information security risk management
ISO/IEC 27006 Information technology Security techniques Requirements for bodies providing audit and certification of information security
management systems
ISO/IEC 27011 Information technology Security techniques Information security management guidelines for telecommunications organizations based
on ISO/IEC 27002
ISO/IEC 27037:2012 Information technology Security techniques Guidelines for identification, collection, acquisition and preservation of digital
evidence
ISO/TS 27687:2008 Nanotechnologies Terminology and definitions for nano-objects Nanoparticle, nanofibre and nanoplate
ISO 27799:2008 Health informaticsInformation security management in health using ISO/IEC 27002
ISO 28000 Specification for security management systems for the supply chain
ISO 28001:2007 Security management systems for the supply chain Best practices for implementing supply chain security, assessments and plans
Requirements and guidance
ISO 28003 Security management systems for the supply chain Requirements for bodies providing audit and certification of supply chain security
management systems
ISO 28004 Security management systems for the supply chain Guidelines for the implementation of ISO 28000
ISO/PAS 28007:2012 Ships and marine technologyGuidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed
security personnel (PCASP) on board ships (and pro forma contract)
ISO 28300:2008 Petroleum, petrochemical and natural gas industries Venting of atmospheric and low-pressure storage tanks
ISO/IEC 29119 Software and systems engineering Software testing
ISO/IEC 29500 Information technology Document description and processing languages Office Open XML File Formats
ISO/IEC 29500-1 Fundamentals and Markup Language Reference
ISO/IEC 29500-2 Open Packaging Conventions
ISO/IEC 29500-3 Markup Compatibility and Extensibility
ISO/IEC 29500-4 Transitional Migration Features
ISO 80000
ISO/IEC 80000 Quantities and units
ISO/TS 80004 Nanotechnologies Vocabulary
ISO/TS 80004-1 Core terms
ISO/TS 80004-3 Carbon nano-objects
ISO/TS 80004-4 Nanostructured materials
ISO/TS 80004-5 Nano/bio interface
ISO/TS 80004-7 Diagnostics and therapeutics for healthcare
See also
Notes
1. This list generally excludes draft versions.
2. ISO deliverables (http://www.iso.org/iso/home/standards_development/deliverables-all.htm) include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which
are not referred to by ISO as "standards".
3. The exact wording of this title varies between parts. This is the wording of the most recently published part.
References
1. "Standards catalog". ISO.
2. "Freely Available Standards". ISO.
External links
International Organization for Standardization (http://www.iso.org)
Retrieved from "https://en.wikipedia.org/w/index.php?title=List_of_International_Organization_for_Standardization_standards&oldid=744101526"
Categories: Lists of standards International Organization for Standardization
This page was last modified on 13 October 2016, at 03:57.
Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of
Use and Privacy Policy. Wikipedia is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.