Professional Documents
Culture Documents
E-Line Pull Up & Dip Station: Installation Specifications
E-Line Pull Up & Dip Station: Installation Specifications
This equipment offered in the E-Line and TriActive Fitness Line products.
Before you start the installation process, please read these Installation
Specifications carefully and contact us with any questions. Maintenance
includes applying paint over any chipped powder coating. Actual equipment
may be different than shown due to frequent design upgrades. This equipment is designed for individuals weighing up to 330lbs..
Parts and materials include:
e-coated then powder-coated steel
stainless steel hardware
galvanized foundation hardware
plastic safety covers
rubber hand grips
Tools needed:
crescent wrench or socket wrench set
Weight = 191 lbs.
Label:
Installed Dimensions
Length
3 8
(1.12m)
Width
Height*
3 5
7 0
(1.04m)
(2.14m)
* excludes surface material thickness
QR Code for Smart Phone
Rev. 9/12
For installation options with alternative surfacing, concrete pads, or other conditions, please
contact TriActive America or our local Sales Partners. This specification sheet shows the
minimum requirements for installation. If you have questions, discrepancies with the
equipment, or these specifications, or difficulties with the installation, immediately contact us at
1-800-587-4228.
Foundation Cross-Section
Allow 1/2 of bolt threads to extend above the foundation tab, or frame
for plastic caps to fit.
3
2-1/4
Foundation
hole depth
1 0
5-1/4
7-1/2
2 Concrete Footers
1 7-1/2
12
Surface grade
Subsurface material
Concrete
Bolt
Frame
Bolt location
3 2-1/4
ePDIP-2a