Professional Documents
Culture Documents
Engineering Faqs: Join Now User Login
Engineering Faqs: Join Now User Login
Pgina 1 de 1
Join Now
Channels
User Login
SEARCH AISC
Engineering FAQs
Send to a friend
Engineering FAQs
SEARCH IN FAQS
Env
7.2.4. What thickness and size of washer is required for the preferred hole diameters in base plates?
A general rule of thumb is given in AISC Design Guide #10 Erection Bracing of Low-Rise Structural Steel Frames1: the minimum thickness
should be one-third the diameter of the anchor rod and that the minimum diameter (or length and width for a non-circular washer) should be
1-in. larger than the hole diameter. When the anchor rod transmits tension, the washer size must be sufficient to transmit the force to the
base plate. Washers of the appropriate size can generally be fabricated from plate.
[1] Fisher, J.M. and M.A. West, 1997, Erection Bracing of Low-Rise Structural Steel Frames, AISC, Chicago, IL.
last updated 30 August 2002
Enviar consulta
Copyright 2016
NEWSFEED
SUBSCRIBE
https://www.aisc.org/DynamicQuestion.aspx?Grpid=6&QueId=1842&ste=_Preview&id=... 12/09/2016