This document describes two embedded system projects. The first project is a fire detection unit for cotton mills that uses a PIC controller, fire sensor, GSM module, alarm unit, and water pump to detect fires, activate alarms and water pumps, and send alerts via text message. The second project is a water tank level monitoring system with two team members that uses a PIC controller, GSM modem, and float switches to monitor water levels, control a pump based on levels, and send status updates via text. Both projects involve developing hardware and software using embedded C on PIC microcontrollers.
This document describes two embedded system projects. The first project is a fire detection unit for cotton mills that uses a PIC controller, fire sensor, GSM module, alarm unit, and water pump to detect fires, activate alarms and water pumps, and send alerts via text message. The second project is a water tank level monitoring system with two team members that uses a PIC controller, GSM modem, and float switches to monitor water levels, control a pump based on levels, and send status updates via text. Both projects involve developing hardware and software using embedded C on PIC microcontrollers.
This document describes two embedded system projects. The first project is a fire detection unit for cotton mills that uses a PIC controller, fire sensor, GSM module, alarm unit, and water pump to detect fires, activate alarms and water pumps, and send alerts via text message. The second project is a water tank level monitoring system with two team members that uses a PIC controller, GSM modem, and float switches to monitor water levels, control a pump based on levels, and send status updates via text. Both projects involve developing hardware and software using embedded C on PIC microcontrollers.
Project name Fire Detection Unit For Cotton Mills.
Team size: 3 Tool used: Embedded C, PIC Controller, Fire sensor, GSM, Alarm Unit. Role : Hardware and Software development. Description: In this system PIC 16F873A controller monitors the signal from the fire sensor if the fire is detected in any cotton unit it gives the signal to the controller, then the controller will switch on the alarm, activates the water pump by using the relay unit and using interfaced GSM it will transmits the message to the user we have provided a Buzzer which turns on when SMS is sent to user. Project name Water Tank Level Monitoring System. Team size:2 Tool used: Embedded C, PIC C Complier, GSM modem, UART. Role : Design and development of Software and hardware. Description: This Water Tank Level Monitoring and Pump Control System is used for monitoring the dry contact signals from level float switches to monitor the low water level and high level and transfer control information to the controller by this information water pump start the pump in case of low level and stop the pump in case of high level. Also based on customer can control a this motor by GSM technology. This every event of motor ON and OFF information send to customer mobile with water level information. Here, GSM modem, PIC 16F877A controller and level float switches are involved for this automation.