Professional Documents
Culture Documents
Proposal - Ayush Park
Proposal - Ayush Park
Application
Spray Plastering
Products
Price Packing /
Coverage
(Rs.)
Unit
Unit
Readyplast Spray
301 40 Kg Bag
19
SFt @ 15mm
15.84
1.6-1.8Kg/m2/mm
301 40 Kg Bag
11.4
SFt @ 25mm
26.40
250
SFt (2 Coats)
10.90
Waterproofing
Watergaurd A
20
+ Primer
Faircrete SB (L)
160
Ltr
100
SFt
1.60
+ Screed
Fairtop Underlayment
10
SFt @ 10mm
59.90
20
Waterproofing
WGL Membrane
243
Ltr
15.06
20
+ Primer
Faircrete SB (L)
165
Ltr
100
SFt
1.65
+ Screed
Readyplast FB ( E )
230 40 Kg Bag
11
SFt @ 25mm
20.91
Blockwork
Readyplast M Super
398 35 Kg Bag
0.98
407.86
Clear Coat
Water repel S
150
1 Ltr
50
SFt
3.00
Joint Filling
Flowgrout 60
30
Kg.
20
35
As per the work surface
TM
READYPLAST SPRAY
Density
Water Flow
Water addition :
BENEFITS
< Consistency & Assured quality for external & internal
plaster.
< Excellent permeability resistant. Increased plastic life
of mortar and reduces drying shrinkage cracks.
< Improved labor productivity hence reduces the cost.
So it is Eco-friendly.
< Consistent Quality : High quality consistent formula
batch to batch; strong adhesion to substrate;
shrinkage control for reduced cracking.
< Sprayability : Faster mixing & application using spray
machine; just add water, easier to transport to job site
& convey within site.
< Pumpability : Additives that enhance pumpability;
lubricating effect reducing friction between solid
ingredients; higher yield of finish coat.
< Improved workability and curing.
< Higher yield of finish coat application.
< Uniform color / mass.
< Strong adhesion to substrate.
DESCRIPTION
READYPLAST SPRAY is a sprayable water/weather
resistant premixed plaster that is :
< Factory prepared blend of Portland cement, precisely
graded sand & high performance additives.
< A grey color dry mix that only requires the addition of
water on-site to provide a consistent quality.
USES
All spray plastering of internal & external use on :
< Block & rough surfaces without scratch coat.
< Smooth concrete surfaces prepared with a scratch
coat (READYPLAST RUSH COAT).
< Varying range of dry or humid conditions.
COMPOSITION & STANDARDS
Binders
: Portland Cement (ASTM C-150, Type
I & IS : 12269 : 1987).
Aggregate
: Precisely Graded.
Additives
: For improved consistency, adhesion,
workability & pumpability.
Standards
JOB APPLICATION
Substrate Preparation : Prepare the substrate by cleaning
any dust, loose particles, grease & any straces of foreign
materials. Just prior to application moisten all surfaces with
clean water that will receive READYPLAST SPARY.
Application : READYPLAST SPRAY is applied in single
coat method. Using a mechanical spray machine apply
READYPLAST SPRAY to the properly prepared surface to
a thickness of 12 to 15 mm.
NOTE : Cover approximately 95 % - 100 % of the surface
area to be plastered.
Curing :
a) READYPLAST SPARY must be cured by water spray
once in every 12 hours, for at least the first 2 days after
application; during hot & dry conditions, cure more
frequently and/or for longer periods to results in less
cracks and higher strength.
b) Moist cure by uniformly spraying clean water on the
applied surface to sufficiently saturate READYPLAST
SPRAY.
PACKING & COVERAGE
Packing : 40 kg net weight in a woven bag.
Coverage : Machine can produce 500 m @ 15 mm thick @
8 working hours / day.
Approximately 1.6 to 1.8 kg/m/mm of dry product manually.
i.e. 40 kg bag will cover approximately : 1.8 to 2.0 m per 15
mm layer.
The stated consumption values are for guidance & depend
on the nature of the substrate, the application method & any
loss or wastage.
SHELF LIFE AND STORAGE
READYPLAST SPRAY will have a Shelf life of 6 months
from the date shown on the bag & kept unopened under dry
and shaded place. Store in unopened packaging clear of
the ground, in cool dry conditions & protected from weather.
TM
READYPLAST SPRAY
QUALITY ASSURANCE
Fairmate manufactures entire range of construction
chemicals under compliance of ISO 9001, ISO (EMS)
14001 & OHSAS 18001 (Occupational Health and Safety)
certified by ISOQAR / UK.
CONCRETE ADMIXTURES
WATERPROOFING SYSTEMS
ENGINEERING GROUTS
INDUSTRIAL FLOOR SURFACES
TECHNICAL SERVICES
While new advances and changes will take place but one
thing will never change is quality and meeting special needs
of our customers. Our laboratory in Baroda and technical
personnel & experts are available to provide additional
information and technical assistance. We are eager to work
with you in development of new product and resolve your
problem.
CONCRETE REPAIRS
SURFACE TREATMENT
PREPACKED CONCRETE MORTAR
PROTECTIVE COATING
HIGHWAY REPAIR
LIQUID FLOOR
WALL FINISHING SYSTEM
Corporate Office
8/1, SAI SUDHA,
Arunoday Society, Alkapuri
Vadodara 390 007. Gujarat, India
INDIA
DUBAI
NEPAL
GHANA
SAUDI ARABIA
sales@fairmate.com
www.fairmate.com
www.fairmateshoppee.com
KENYA
NIGERIA
USA
VENEZUELA
MALAYSIA
FM/03/12/A
TM
READYPLAST M (SUPER)
READYMIX PLASTERING MORTAR
FOR MASONARY WORK
BENEFITS
<
Pre-mixed and ready to use.
<
Easy to mix, as only water is to be added at site.
<
No water curing is required after application.
<
Eliminates lengthy process of site mixing, transport
and storage of all individual materials.
<
It is also economical as quantity of mortar is far less
than conventional mortar.
<
Thinner layer of application for lesser shrinkage and
seamless structure.
<
Seepage and water percolation through the joints is
negligible.
<
Ready for subsequent application like plastering just
after 24 hours of application.
<
Raking of joints is not required before plastering.
<
High adhesive strength.
<
Improves overall masonry strength and load bearing
capacity.
PRODUCT
READYPLAST M (SUPER) jointing mortar is made from a
unique combination of cement, graded sand and selective
additives. The unique chemical combination enables this
mortar to more compact, thinner and more versatile. It is
premixed and easy to use and also ensures the compaction
of interlocking bricks making the bonds tougher and more
durable. This mortar is specially designed to provide
stronger, much more durable bonding between the blocks
and superior adhesive strength.
USES
<
Laying and jointing of masonry units like fly ash
bricks, concrete blocks, hollow blocks AAC blocks
etc.
<
Jointing of pre stressed concrete slabs, panels.
<
Jointing cement concrete floor tiles.
<
Jointing of concrete window and door frames.
TYPICAL PROPERTIES
Physical Form
:
Colour
:
Workability
:
Pot Life
:
Tensile Adhesion
Strength @ 28 days :
Powder
Cement Grey
Very Good
Apprx. 2 hrs @ 27C
0.8 N/mm2
APPLICATION
Surface Preparation :
<
Before the application of jointing mortar, the surface
of masonry units should be slightly wet.
<
The masonry units should be clean, with no loose
particles or dust for better bonding.
<
The surface must be structurally sound.
<
Surface defects such as cracks, holes or voids should
be repaired prior to application.
Mixing:
<
READYPLAST M (SUPER) is ready for use only
precise quantity of water to be added before use.
<
For mixing the material it is advisable to use
mechanical stirrer for uniform mixing.
<
For mixing use a clean vessel/bucket which does not
have any hole or cut.
<
Add some water in the empty vessel to ensure no
powder gets stuck on the bottom of the vessel and put
precise quantity of READYPLAST M (SUPER).
<
Add water in stages to get a smooth, uniform,
workable mix.
<
Ensure that no powder is left unmixed at the bottom of
the vessel.
<
The jointing mortar is now ready for application.
Application:
<
Apply a thin uniform layer of Readyplast M (Super) 3
to 4mm thick on the clean and levelled surface of
masonry units using proper trowel.
<
Place the next course of masonry units on the evenly
laid jointing mortar bed in proper line & level.
<
After placing the first unit, apply the jointing mortar of
same thickness as both the sides of the unit, keeping
continuous check for line and level.
<
Inside face of the masonry unit shall be buttered with
mortar before the next unit is laid and pressed
against it especially in case of brick masonry.
<
Clean the excess material, if any immediately.
<
Continue the procedure for the entire masonry work.
PACKING AND COVERAGE
READYPLAST M (SUPER) is available in 35 kg of woven
bag.
35 kg of READYPLAST M (SUPER) will cover approx. 6070 sq.ft. With average thickness of 3mm.However, the
coverage area will depend upon the quality & evenness of
the substrate, thickness of joint and size of the masonry
units.
TM
READYPLAST M (SUPER)
SHELF LIFE AND STORAGE
READYPLAST M (SUPER) will have a shelf life of
9 months in unopened containers when kept in dry
conditions at a temperature between 5C to 45C. Storage
at higher temperature or high humidity may reduce shelf
life.
HEALTH & SAFETY
READYPLAST M (SUPER) is non-toxic. However,
splashes on the skin should be washed well with water and
in contact with eye occurs, wash well with water and seek
medical advice.
QUALITY ASSURANCE
Fairmate manufactures entire range of construction
chemicals under compliance of ISO 9001, ISO (EMS)
14001 & OHSAS 18001 (Occupational Health and Safety)
certified by ISOQAR / UK.
TECHNICAL SERVICES
While new advances and changes will take place but one
thing will never change is quality and meeting special needs
of our customers. Our laboratory in Baroda and technical
personnel & experts are available to provide additional
information and technical assistance. We are eager to work
with you in development of new product and resolve your
problem.
FM/02/12/A
Indian Multi-National
WATERREPELL
S
Universal silicon base
water repellent
<
<
<
<
<
<
<
<
TM
WATERREPELL S
UNIVERSAL
SILICON BASE WATER REPELLENT
Application Manual
<
DESCRIPTION
COVERAGE
APPARATUS / MATERIAL
<
Brush 4size
texture.
<
Pressure Spray
<
QUALITY ASSURANCE
Fairmate manufactures entire range of
APPLICATION METHOD
SURFACE TREATMENT
<
ISOQAR / UK.
<
<
TECHNICAL SERVICES
be removed.
S.
Application Manual
AM/05/09/A
31
Indian Multi-National
FLOWGROUT 60
Ultra high strength,
free flowing, non-shrink
cementitious grout
<
<
<
<
<
<
<
<
<
<
FLOWGROUT 60 can be used to Bolt pockets and base plate grouting of all
equipment, Crane, stanchion bases and all types of machinery with dynamic
load.
TM
FLOWGROUT 60
ULTRA HIGH STRENGTH, FREE FLOWING,
NON-SHRINK CEMENTITIOUS GROUT
Application Manual
DESCRIPTION
FLOWGROUT 60 is a single pack, ready to use,
ultra high strength, cementitious, free-flowing, nonshrink grout. FLOWGROUT 60 can be used as
heavy duty grout for heavy reciprocating pumps,
generators, compressors, pulverisers, steel rolling
mill beds, cement plant, textile mills, paper plant
machineries.
APPARATUS/MATERIAL
< Electrically operated mechanical mixer(with
paddle attachment)
< Container for mixing
< Shuttering material around the periphery (for
grouting purpose)
< FLOWGROUT 60 (as per requirement)
Application Manual
APPLICATION METHOD
SURFACE PREPARATION
< All contaminated surfaces must be cleaned
thoroughly by chemical or mechanical
methods.
< All bolt pockets and under bases must be free
from dust & laitance and should be of sound
substrate.
< Just before the grouting is to commence, all
water must be removed completely leaving the
surface only damp.
APPLICATION
< For the optimum use and to gain benefit of the
product, mixing with electrically operated
stirrer is recommended.
< Place 80% of the water required in a concrete
mixer [100% in case of a grout mixer]. Slowly
add the required amount of FLOWGROUT 60
while continuously stirring for 1 minute.
< Add balance quantity of water (20%) and mix
for 3 to 5 minutes. This will provide a smooth
even consistency of grout. The mixed grout
AM/04/09/A
52
Indian Multi-National
WATERGUARD A
Polymer modied
cementitious waterproof
coating
<
<
<
<
<
<
<
<
<
<
TM
WATERGUARD A
AN EASILY BRUSH APPLIED CEMENTITIOUS
WATER PROOF COATING
Application Manual
< For
effective
water
proofing
by
DESCRIPTION
stresses.
< WATERGUARD A must be applied in 2-3
uniform coats. Mixed WATERGUARD A
APPARATUS / MATERIAL
attachment
< Brush
COVERAGE
QUALITY ASSURANCE
APPLICATION METHOD
SURFACE PREPARATION
< All concrete surfaces shall be a minimum of 21
days old.
< Substrate must be sound, clean and free from
loose particles or laittances or contamination
and preferably be wire brushed.
< All leaks and water jets must be stopped using
WATERPLUG plugging compound. (Refer
relevant Data Sheet).
< Cracks must be treated first depending on the
type of crack by CRACKSEAL (refer data
sheet)
APPLICATION
Application Manual
AM/12/08/A
11
FAIRFIX UNDERLAYMENT
One part self - leveling underlayment
Description
FAIRMATE is an Indian Multi-national construction
chemicals manufacturing company having offices and
operations in various parts of the world. We have our
Corporate office in Baroda, India and our branch
offices are spread across country. FAIRMATE is serving
Construction Industry for more than three decades.
Apart from our existing manufacturing facilities in
India, Dubai and Far-East, FAIRMATE has widened its
presence to few more countries like Nepal, Ghana,
Pakistan, Sri Lanka, Saudi Arabia, Turkey, Lebanon and
Qatar etc.
FAIRMATE manufactures complete range of
construction chemicals and is also providing total costeffective solutions and World Class Services to
Speciality Construction Chemical Industry by using our
expertise and strategic alliances with leading partners.
We have a primary technical collaboration with M/s
Resin Building Products Ltd., UK and M/s Morton
Chemicals, USA. We are also Strategic Partner with
M/s, Geocel UK. Our continuous research and efforts
in developing new products have resulted in
introducing more than 350 products in the Civil
Engineering Industry. Our products are broadly
classified as Concrete Admixture, Waterproofing
System, Engineering Grouts, Industrial Flooring
System, Surface Treatment, Concrete Repairs, Prepacked Concrete and Mortar, Protective Coating,
Sealants, Highway Repairs and Fire Protection
systems.
QUALITY FOCUS
FAIRMATE has set-up its plant and state-of-art R&D
centres in various parts of the globe. Quality has
always been an integral part of Management
Philosophy. Ensuring international standard products
to our esteemed customers, we have been accredited
by ISO 9001 and ISO (EMS) 14001, which emphasize
the quality system of each and every step of
processing and 'zero' defect operations. We have gone
further and have implemented ISO (OHSAS) 18001,
which relates to total operational Health and Safety. To
ensure Total Customer Satisfaction FAIRMATE is now
marching towards SIX SIGMA.
We are proud to share with you that FAIRMATE has
now become the member of IGBC - Indian Green
Building Council, Hyderabad. We are now part of
Green Building movement.
VALUES
The values that drive us underscore our commitment
to:
Customer Delight : consistently surpass customer
expectations.
FAIRMATE also ensures application of the products
through authorized trained applicators.
FAIRMATE caters to a large group of customers ranging
from multinational companies to individual domestic
customers. We have a wide network in India as well as
internationally.
Underlayment Concrete remains one of the most durable, functional, reliable building materials
available in the construction industry.
In situations where a concrete slab has cracked, spalled or aged, Fairmate's cementitious
underlayment can provide a solution. FAIRMATE offers a self-leveling, hardwearing, cementitious
underlayment flooring system FAIRFIX UNDERLAYMENT.
Benefits
<
<
<
<
<
<
<
<
<
<
<
<
Underlayment Application
Priming
2. CARPET LAYING
An even and smooth leveled surface is obtained by FAIRFIX UNDERLAYMENT.
The carpet laying can be done on the surface of the FAIRFIX
UNDERLAYMENT as it gives a flat floor surface beneficial for carpet laying.
3. WOODEN FLOORING
For doing wooden flooring, even floor is pre-requisite which can be obtained by
FAIRFIX UNDERLAYMENT. This will give a smooth and even leveled surface
which will give you a perfect surface for doing wooden floorings. Note that the
surface should be cured properly before wooden flooring is to be done.
FAIRFIX UNDERLAYMENT can be used to prepare a wide variety of sub-floors for resilient & in flooring, wood flooring and many types of surface coatings. It may
also be left exposed as a final finish in light industrial or commercial environments.
FAIRFIX TT
Is a prepacked two part system tile adhesive, ensures
excellent bond on concrete, masonry, marble, can be
used to fix tile on tile and acoustic and insulating board,
gives perfect water tightness, excellent waterproofin
gcharacteristics. Coverage: 5-7m per pack.
FAIRSCREED TA
Three pack, epoxy based low odour chemical resistant
tile adhesive, with good gripping to surface. Applicable
for vehicular & pedestrian traffic. Coverage : 25 kg.
covers 2.6m at 4 mm thickness.
FAIRSCREED TG
Thixotropic, solvent free epoxy tile grout, resistant to
water, weathering & wide range of chemicals. Available in
various colours.
FAIRFIX GLUE
Is a two-component, catalysed polyester resin based
adhesives for bonding and filling marble, has very good
adhesion to marble and other stones of similar porosity,
has very fast initial cure. It is available in tubes of resin
and hardner as shown below. Coverage : 4 to 5 sq. ft per
1kg with 2mm thickness.
www.fairmate.com
http://app.fairmate.com
www.waterproofing4u.com
www.facebook.com/fairmate
www.youtube.com/fairmatefm
INDIA
8/1, SAI SUDHA,
Arunoday Society, Alkapuri
Vadodara 390 007. Gujarat, India
Tel. : 0091 265 2331193, 2331399, 2330803
Fax : 0091 265 2338733
Email: sales@fairmate.com
DUBAI
Hamriyah Free Zone
P.O. Box No. 42023
Sharjah, UAE
Tel. : +9716 5261052
Fax : +9716 5261053
Email: sales@fairmate.ae
NEPAL
Byasi, Bhaktapur-17
Kathmandu
Nepal.
Tel. : 00977 9721504009
Email: nepal@fairmate.com
GHANA
P. O. Box KD 84
Kanda, Accra
Ghana, West Africa.
Tel. : 00233 20 399 0495
00233 26 318 5940
Email: fmghana@fairmate.com
SAUDI ARABIA
P. O. Box : 2579
Al Jubail 31951
Saudi Arabia.
Tel. : +9663 3632387
Fax : +9663 3632386
Email: fmsaudi@fairmate.com
HEAD OFFICE
1514, Ranchhod Bhuvan
Moti Vasan Sheri
Saraspur
Ahmedabad - 380 018.
AHMEDABAD
Tel. : 079 26465219
Fax : 079 26465577
MUMBAI
Tel. : 022 28794044 / 45
Email : mumbai@fairmate.net
DELHI
Tel./Fax : 011 27306282
Email : delhi@fairmate.net
JALANDHAR
Tel. : 0181 5050850
Email : punjab@fairmate.com
BENGALURU
Tel. : 080 23639852
Fax : 080 23639851
Email : bangalore@fairmate.net
CHENNAI
09879613002
KOLKATA
08420613757
LUCKNOW
09415278977
BHUVANESHWAR
09778336633
JAIPUR
09928661777
PANIPAT
09813972551
UDAIPUR
09829699943
KOCHI
09925032189
SANGLI
09850817020
AGRA
09719402888
BANGLADESH | BHUTAN | EGYPT | KENYA | KUWAIT | LEBANON | OMAN | PAKISTAN | QATAR | SINGAPORE | SRILANKA | THAILAND
Important Note
FM/06/12/A
The information given in this data sheet is based on both the current development work and many years of field experience. Whilst every effort is made to ensure that the information is reliable, we cannot accept the
responsibility for any work carried out with our materials as we have no control over methods of application, site conditions etc. In view of the continuing research and development being undertaken in our laboratories we
advise customers in their own interest to ensure that this data sheet has not been supersede by a more up-to-date publication. All products are sold subjected to our standard conditions of sale which are available on request.
Field services, where provided, does not constitute supervisory responsibility. For additional information, please contact our local FAIRMATE representative.
- Registered Trade Mark
TM
FAIRFIX UNDERLAYMENT
ONE PART SELF-LEVELLING UNDERLAYMENT
Application Manual
<
APPARATUS / MATERIAL
< Spike roller
< Trowel(when FAIRFIX UNDERLAYMENT is
used as plastering material)
< Smoother
< Drill with paddle attachment for mixing
< Container
< FAIRCRETE SB(L) (as per requirement)
< FA I R F I X U N D E R L AY M E N T ( a s p e r
requirement)
APPLICATION METHOD
SURFACE TREATMENT
< All concrete surface must be a minimum
21days old.
< All concrete surfaces must be clean and free of
oil, dirt, debris, curing compounds, sealers,
paint and unsound concrete should be
removed.
< All concrete should possess an open surface
texture with all curing compounds and sealer
removed.
APPLICATION
< After the surface has been prepared; prime all
areas with FAIRCRETE SB(L). Allow to
become touch dry before application of
FAIRFIX UNDERLAYMENT.
< Small quantities of FAIRFIX
UNDERLAYMENT should be bucket mixed
with a drill and mixer.
< FAIRFIX UNDERLAYMENT is a quick setting
product, therefore mixing shall be done as per
<
<
<
COVERAGE
FAIRFIX UNDERLAYMENT has a coverage of
1.8kg/mm/m.
QUALITY ASSURANCE
Fairmate manufactures entire range of
construction chemicals under compliance of ISO
9001, ISO (EMS) 14001 & OHSAS 18001
(Occupational Health and Safety) certified by
ISOQAR / UK.
TECHNICAL SERVICES
While new advances and changes will take place
but one thing will never change is quality and
meeting special needs of our customers. Our
laboratory in Baroda and technical personnel &
experts are available to provide additional
information and technical assistance. We are
eager to work with you in development of new
product and resolve your problem.
AM/12/08/A
162
Application Manual
DESCRIPTION
FAIRFIX UNDERLAYMENT is a free flowing
cementitious, self-leveling, compound specially
designed for easy application over concrete floors
& walls as an underlayment for subsequent
placement of floor/wall coverings. FAIRFIX
UNDERLAYMENT is a one part system requiring
only the addition of water for mixing.
Indian Multi-National
WATERGUARD
LIQUID MEMBRANE
Liquid applied single
component elastomeric
waterproofing membrane
In technical collaboration with Ms. RBP Ltd. UK
<
<
<
<
<
<
<
TM
Application Manual
DESCRIPTION
application.)
<
polymers.
APPARATUS / MATERIAL
application.
<
<
<
imminent.
<
APPLICATION METHOD
SURFACE PREPARATION
<
<
<
<
COVERAGE
and profile.
QUALITY ASSURANCE
ISOQAR / UK.
Application Manual
TECHNICAL SERVICES
application.
APPLICATION
<
AM/09/12/B
37
Indian Multi-National
READYPLAST FB(E)
Fiber reinforced readymix
plastering mortar for
external use
<
<
<
<
<
<
<
<
<
READYPLAST FB(E) can be used on brick, block & concrete walls, patching
honeycombs in concrete & other general usages to improve the quality of
plastering work.