Professional Documents
Culture Documents
SS Steel Pipes Flange Fittings Valves
SS Steel Pipes Flange Fittings Valves
SS Steel Pipes Flange Fittings Valves
15
SA-182/SA-182M
243
This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.
(Identical with ASTM Specification A182/A182M-14a except for the inclusion of Grade F316Ti in
7.3.1, and the removal of reduced strength levels for Grade F53 in Table 3.).)
ASME BPVC.II.A-2015
No fu
ASME BPVC.II.A-2015
1. Scope
1.1 This specification covers forged low alloy and stainless
steel piping components for use in pressure systems. Included
are flanges, fittings, valves, and similar parts to specified
dimensions or to dimensional standards, such as the ASME
specifications that are referenced in Section 2.
1.2 For bars and products machined directly from bar (other
than those directly addressed by this specification; see 6.4),
refer to Specifications A479/A479M and A739 for the similar
grades available in those specifications. Products made to this
specification are limited to a maximum weight of 10 000 lb
[4540 kg]. For larger products and products for other
applications, refer to Specifications A336/A336M and A965/
A965M for the similar ferritic and austenitic grades,
respectively, available in those specifications.
2. Referenced Documents
2.1 In addition to the referenced documents listed in Specification A961/A961M, the following list of standards apply to
this specification.
244
This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.
SA-182/SA-182M
No fu
SA-182/SA-182M
3. Terminology
3.1 DefinitionsFor definitions of terms used in this
specification, refer to Specification A961/A961M.
3.2 Definitions of Terms Specific to This Standard:
3.2.1 hardened condition, nfor F23, the metallurgical
condition achieved after normalizing and cooling to room
temperature but prior to tempering.
4. Ordering Information
7. Heat Treatment
7.1 After hot working, forgings shall be cooled to a temperature below 1000 F [538 C] prior to heat treating in
accordance with the requirements of Table 1.
245
This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.
ASME BPVC.II.A-2015
No fu
ASME BPVC.II.A-2015
F1
F2
F 5, F 5a
F9
F
F
F
F
F
F
10
91
92
122
911
11, Class 1, 2, 3
F 12, Class 1, 2
F 21, F 3V, and F
3VCb
anneal
normalize and temper
anneal
normalize and temper
anneal
normalize and temper
anneal
normalize and temper
solution treat and quench
normalize and temper
normalize and temper
normalize and temper
normalize and temper
anneal
normalize and temper
anneal
normalize and temper
anneal
F 23
F 24
F 22, Class 1, 3
F 22V
FR
F 36, Class 1
F 36, Class 2
F 6a Class 1
anneal
normalize
normalize and temper
normalize and temper
normalize and temper
quench and temper
F XM-27 Cb
F 429
F 430
anneal
anneal
anneal
F 304
F 304H
F 304L
F 304N
F 304LN
F 309H
F 310
F 310H
F 310MoLN
F 316
F 316H
F 316L
F 316N
F 316LN
F 316Ti
F 317
F 317L
S31727
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
F 6a Class 2
F 6a Class 3
F 6a Class 4
F 6b
and temper
and temper
and temper
and temper
and temper
and temper
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
Cooling
Media
[955]
[900]
[900]
[900]
air cool
furnace cool
air cool
air cool or liquid
1900-1975 [1040-1080]
air cool
accelerated cool
1800-1975 [980-1080]
air cool
or liquid
1750 [955]
furnace cool
1750 [955]
air cool
1750 [955]
air cool
1650 [900]
air cool
1650 [900]
air cool
1650 [900]
accelerated air cool
or liquid
Martensitic Stainless Steels
not specified
furnace cool
not specified
air cool
B
not required
not specified
furnace cool
not specified
air cool
B
not required
not specified
furnace cool
not specified
air cool
not specified
furnace cool
not specified
air cool
1750 [955]
furnace cool
1750 [955]
air cool
1850 [1010]
air cool
Ferritic Stainless Steels
1850 [1010]
furnace cool
1850 [1010]
furnace cool
not specified
furnace cool
Austenitic Stainless Steels
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
19002010 [10501100]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
1900 [1040]
liquid
19752155 [10801180]
liquid
246
Quenching Cool
Below F [C]
Tempering Temperature,
Minimum or
Range, F [C]
1150 [620]
1150 [620]
1250 [675]
1250 [675]
500 [260]
13501470
13501470
13501470
13651435
B
B
B
B
1150 [620]
1150 [620]
1250 [675]
[730800]
[730800]
[730800]
[740-780]
B
B
1250 [675]
1250 [675]
13501470 [730800]
13501470 [730800]
1250 [675]
1100 [595]
1100 [595]
1100 [595]
400 [205]
1325 [725]
1325 [725]
400 [205]
B
1250 [675]
1250 [675]
400 [205]
1100 [595]
400 [205]
1000 [540]
400 [205]
200 [95]
1150 [620]
1040-1120 [560-600]
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.
F 6NM
anneal
normalize
temper
anneal
normalize
temper
anneal
normalize
anneal
normalize
anneal
normalize
normalize
Austenitizing/Solutioning
Temperature, Minimum
or Range, F [C]A
SA-182/SA-182M
No fu
TABLE 1
Grade
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
19752155 [10801180]
1900 [1040]
2000 [1095]
1900 [1040]
1900 [1040]
2000 [1095]
1900 [1040]
2000 [1095]
1900 [1040]
1900 [1040]
1700-1850 [925-1010]
2100 [1150]
1900 [1040]
2010-2140 [1100-1140]
1900 [1040]
1900 [1040]
2050 [1120]
2050-2160 [1120-1180]
2085 [1140]
2025 [1105]
1900 [1040]
2010-2140 [1100-1170]
1920-2100 [1050-1150]
1900 [1040]
Ferritic-Austenitic
1925 [1050]
1870 [1020]
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
1880 [1025]
1920-2060 [1050-1125]
2010-2085 [1100-1140]
1940 [1060]
1975-2050 [1080-1120]
1870 [1020]
1920-2060 [1050-1125]
1830-2100 [1000-1150]
18701975 [10201080]
18702050 [10201120]
17001920 [9251050]
1870 [1020]
19252100 [10501150]
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
quench
Cooling
Media
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquidD
Stainless Steels
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquid
liquidD
liquid
liquid
liquid
liquid
liquid
Quenching Cool
Below F [C]
Tempering Temperature,
Minimum or
Range, F [C]
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
500
500
500
500
500
500
175
500
500
500
500
500
500
500
500
500
[260]
[260]
[260]
[260]
[260]
[260]
[80]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
[260]
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
247
This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
solution
50
51
52C
53
54
55
57
59
60
61
65
66
67
68
69
71
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
treat
Continued
Austenitizing/Solutioning
Temperature, Minimum
or Range, F [C]A
S32053
F 347
F 347H
F 347LN
F 348
F 348H
F 321
F 321H
F XM-11
F XM-19
F 20
F 44
F 45
F 46
F 47
F 48
F 49
F 56
F 58
F 62
F 63
F 64
F 904L
F70
SA-182/SA-182M
ASME BPVC.II.A-2015
No fu
ASME BPVC.II.A-2015
9. Mechanical Properties
9.1 The material shall conform to the requirements as to
mechanical properties for the grade ordered as listed in Table 3.
9.2 Mechanical test specimens shall be obtained from production forgings, or from separately forged test blanks prepared from the stock used to make the finished product. In
either case, mechanical test specimens shall not be removed
until after all heat treatment is complete. If repair welding is
required, test specimens shall not be removed until after
post-weld heat treatment is complete, except for ferritic grades
when the post-weld heat treatment is conducted at least 50 F
[30 C] below the actual tempering temperature. When test
blanks are used, they shall receive approximately the same
working as the finished product. The test blanks shall be heat
treated with the finished product and shall approximate the
maximum cross section of the forgings they represent.
NOTE 1Type in this case is used to describe the forging shape such
as a flange, ell, tee, and the like.
9.3 For normalized and tempered, or quenched and tempered forgings, the central axis of the test specimen shall be
taken at least 14 T from the nearest surface as-heat-treated,
where T is the maximum heat-treated thickness of the represented forging. In addition, for quenched and tempered
forgings, the mid-length of the test specimen shall be at least T
248
This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.
SA-182/SA-182M
No fu
SA-182/SA-182M
5C
5aC
9
10
91
UNS
Designation
Grade
K12822
K12122
carbon-molybdenum
0.5 % chromium,
0.5 % molybdenum
4 to 6 % chromium
4 to 6 % chromium
9 % chromium
20 nickel, 8 chromium
9 % chromium, 1 %
molybdenum, 0.2 %
vanadium plus
columbium and
nitrogen
9 % chromium, 1.8 %
tungsten, 0.2 %
vanadium plus
columbium
K41545
K42544
K90941
S33100
K90901
Composition, %
Carbon
Silicon
Nickel
Chromium
Molybdenum
Columbium
Titanium
Other
Elements
...
...
...
0.500.81
0.440.65
0.440.65
...
...
...
...
...
...
4.06.0
4.06.0
8.010.0
7.09.0
8.09.5
0.440.65
0.440.65
0.901.10
...
0.851.05
...
...
...
...
0.060.10
...
...
...
...
...
...
...
...
...
N 0.030.07
Al 0.02D
V 0.180.25
Ti 0.01D
Zr 0.01D
0.040.09
...
0.28
0.050.21
0.15
0.25
0.15
0.100.20
0.080.12
0.300.60 0.030
0.60 0.040
0.300.60 0.030
0.500.80 0.040
0.300.60 0.020
0.030
0.030
0.030
0.030
0.010
0.070.13
0.300.60 0.020
0.010
0.50
0.40
8.509.50
0.300.60
0.020
0.010
0.50
0.50
10.0011.50
0.250.60
0.50
0.50
0.50
0.50
0.501.00
...
1.001.40 19.022.0
0.200.50 0.40
K92460
F 122
K91271 11 % chromium, 2 %
tungsten, 0.2 %
vanadium, plus
molybdenum,
columbium, copper,
nickel, nitrogen, and
boron
0.070.14
F 911
K91061
9 % chromium, 1 %
molybdenum, 0.2 %
vanadium plus
columbium and
nitrogen
0.090.13
0.300.60 0.020
0.010
0.100.50
0.40
8.59.5
0.901.10
K11597
1.25 % chromium,
0.5 % molybdenum
1.25 % chromium,
0.5 % molybdenum
1.25 % chromium,
0.5 % molybdenum
1 % chromium,
0.5 % molybdenum
1 % chromium,
0.5 % molybdenum
chromium-molybdenum
3 % chromium, 1 %
molybdenum, 0.25 %
vanadium plus boron
and titanium
3 % chromium, 1 %
molybdenum, 0.25 %
vanadium plus boron,
columbium, and
titanium
chromium-molybdenum
0.050.15
0.300.60 0.030
0.030
0.501.00
...
1.001.50
0.440.65
...
...
V 0.150.25
N
0.0300.070
Al 0.02D
W 1.502.00
B
0.0010.006
Ti 0.01D
Zr 0.01D
V 0.150.30
B 0.005
N 0.0400.100
Al 0.02D
Cu 0.301.70
W 1.502.50
Ti 0.01D
Zr 0.01D
W 0.901.10
Al 0.02D
N 0.040.09
V 0.180.25
B 0.0003
0.006
Ti 0.01D
Zr 0.01D
...
0.100.20
0.300.80 0.040
0.040
0.501.00
...
1.001.50
0.440.65
...
...
...
0.100.20
0.300.80 0.040
0.040
0.501.00
...
1.001.50
0.440.65
...
...
...
0.050.15
0.300.60 0.045
0.045
0.50 max
...
0.801.25
0.440.65
...
...
...
0.100.20
0.300.80 0.040
0.040
0.100.60
...
0.801.25
0.440.65
...
...
...
0.050.15
0.050.18
0.300.60 0.040
0.300.60 0.020
0.040
0.020
0.50 max
0.10
...
...
2.73.3
2.83.2
0.801.06
0.901.10
...
...
...
0.015
0.035
...
V 0.200.30
B
0.0010.003
0.100.15
0.300.60 0.020
0.010
0.10
0.25
2.73.3
0.901.10
0.0150.070
0.015
0.050.15
0.300.60 0.040
0.040
0.50
...
2.002.50
0.871.13
...
...
...
...
F 11
Class
F 11
Class
F 11
Class
F 12
Class
F 12
Class
F 21
F 3V
1
K11572
2
K11572
3
K11562
1
K11564
2
K31545
K31830
0.70
0.04
0.10
...
0.0600.10 ...
F 3VCb
K31390
F 22
Class 1
F 22
Class 3
F 22V
K21590
K21590 chromium-molybdenum
0.050.15
0.300.60 0.040
0.040
0.50
...
2.002.50
0.871.13
0.110.15
0.300.60 0.015
0.010
0.10
0.25
2.002.50
0.901.10
0.07
0.030
F 23
K41650
0.040.10
0.100.60 0.030
0.010
0.50
0.40
1.90-2.60
0.05-0.30
0.02
0.08
0.005
0.060F
2.25 % chromium,
1.6 % tungsten, 0.25 %
vanadium, plus
molybdenum,
columbium, and boron
9.6.1 Except when only one forging is produced, a minimum of two pieces per batch or continuous run as defined in
V 0.200.30
Cu 0.25
Ca 0.0005
0.0150
...
...
...
Cu 0.20
V 0.250.35
B 0.002
Ca 0.015E
V 0.200.30
B 0.0010
0.006
N 0.015F
Al 0.030
W 1.451.75
249
This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.
F 92
ASME BPVC.II.A-2015
No fu
ASME BPVC.II.A-2015
TABLE 2
Identification
Symbol
UNS
Designation
Continued
Grade
Composition, %
Carbon
Silicon
Nickel
Chromium
Molybdenum
Columbium
Titanium
...
2.202.60
0.901.10
...
0.06-0.10
...
0.30
...
0.250.50
11.513.5
...
...
...
0.400.60
...
...
...
...
F 24
0.050.10
0.300.70 0.020
0.010
0.150.45
FR
F 36
0.20
0.100.17
0.401.06 0.045
0.801.20 0.030
0.050
0.025
...
1.602.24
0.250.50 1.001.30
F 6a
S41000
F 6b
F 6NM
13 % chromium
410G
S41026
13 % chromium,
0.5 % molybdenum
S41500 13 % chromium, 4 %
nickel
S44627
F 429
S42900
F 430
S43000
F 304
F 304H
F 304L
F 304N
F 304LN
F 309H
F 310
F 310H
F
310MoLN
F 316
F 316H
F 316L
F 316N
27 chromium, 1
molybdenum
XM-27G
15 chromium
429G
17 chromium
430G
0.15
1.00
0.05
0.020
0.020
1.00
0.501.00 0.030
0.030
0.60
0.50
1.002.00 11.513.5
V 0.200.30
N 0.12
Al 0.020
B 0.0015
0.0070
Cu 0.751.25
N 0.020
Al 0.050
Cu 0.500.80
V 0.02
...
Cu 0.50
3.55.5
11.514.0
0.501.00
0.50H
25.027.5
0.751.50
0.12
1.00
0.040
0.030
0.75
0.50
14.016.0
...
...
...
...
0.12
1.00
0.040
0.030
0.75
0.50
16.018.0
...
...
...
...
0.08
8.011.0
18.020.0
...
...
...
0.040.10
2.00
0.045
0.030
1.00
8.011.0
18.020.0
...
...
...
0.030
2.00
0.045
0.030
1.00
8.013.0
18.020.0
...
...
...
N 0.10
0.08
2.00
0.045
0.030
1.00
8.010.5
18.020.0
...
...
...
N 0.100.16
0.030
2.00
0.045
0.030
1.00
8.010.5
18.020.0
...
...
...
N 0.100.16
0.040.10
2.00
0.045
0.030
1.00
12.015.0 22.024.0
...
...
...
...
0.25
2.00
0.045
0.030
1.00
19.022.0 24.026.0
...
...
...
...
0.040.10
2.00
0.045
0.030
1.00
19.022.0 24.026.0
...
...
...
...
0.030
2.00
0.030
0.015
0.40
21.023.0 24.026.0
2.003.00
...
...
N 0.100.16
0.08
2.00
0.045
0.030
1.00
10.014.0 16.018.0
2.003.00
...
...
N 0.10
0.040.10
2.00
0.045
0.030
1.00
10.014.0 16.018.0
2.003.00
...
...
...
0.030
2.00
0.045
0.030
1.00
10.015.0 16.018.0
2.003.00
...
...
N 0.10
0.08
2.00
0.045
0.030
1.00
11.014.0 16.018.0
2.003.00
...
...
N 0.100.16
0.010H
250
0.050.20
...
...
N 0.015H
Cu 0.20H
N 0.10
...
This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.
F XM27Cb
0.15
...
...
0.0150.045
Other
Elements
SA-182/SA-182M
No fu
TABLE 2
Identification
Symbol
F 316LN
F 316Ti
F 317
F 317L
S31727
F 70
S32053
F 321
F 321H
F 347
F347LN
F 348
F 348H
F XM-11
F XM-19
F 20
F 44
F 45
F 46
Continued
Grade
Composition, %
Carbon
Silicon
Nickel
Chromium
Molybdenum
Columbium
Titanium
Other
Elements
0.030
1.00
11.014.0 16.018.0
2.003.00
...
...
N 0.100.16
0.030
1.00
10.014.0 16.018.0
2.003.00
...
N 0.10 max
0.030
1.00
11.015.0 18.020.0
3.04.0
...
...
...
0.030
1.00
11.015.0 18.020.0
3.04.0
...
...
...
0.030
1.00
14.516.5 17.519.0
3.84.5
...
...
Cu 2.84.0
N 0.150.21
0.010
1.00
17.019.0
3.04.0
...
...
Cu 4.05.0
N 0.045
0.010
1.00
24.028.0 22.024.0
5.06.0
...
...
N 0.170.22
0.030
1.00
9.012.0
17.019.0
...
...
...
0.030
1.00
9.012.0
17.019.0
...
...
...
0.030
1.00
9.013.0
17.020.0
...
...
...
0.030
1.00
9.013.0
17.020.0
...
...
...
0.030
1.00
9.013.0
17.019.0
...
...
N 0.060.10
0.030
1.00
9.013.0
17.020.0
...
...
Co 0.20
Ta 0.10
0.030
1.00
9.013.0
17.020.0
...
...
Co 0.20
Ta 0.10
0.030
1.00
5.57.5
19.021.5
...
...
...
N 0.150.40
0.030
1.00
11.513.5 20.523.5
1.503.00
0.10
0.30
...
N 0.200.40
V 0.100.30
0.035
1.00
32.038.0 19.021.0
2.003.00
8xCmin
1.00
...
Cu 3.04.0
0.010
0.80
17.518.5 19.520.5
6.06.5
...
...
Cu 0.501.00
N 0.180.25
1516.5
0.200.50N
0.030
...
...
...
N 0.140.20
Ce 0.030.08
0.020
0.20
...
...
Cu 0.50
251
This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.
F 347H
UNS
Designation
SA-182/SA-182M
ASME BPVC.II.A-2015
No fu
ASME BPVC.II.A-2015
TABLE 2
Identification
Symbol
F 47
F 48
F 49
F 56
F 58
F 62
F 63
F 64
F 904L
F 50
UNS
Designation
Grade
Composition, %
Carbon
S31725
19 chromium, 15
nickel, 4 molybdenum
317LMG
S31726
19 chromium, 15
nickel, 4 molybdenum
317LMNG
S34565
24 chromium, 17
nickel, 6 manganese, 5
molybdenum
S33228 32 nickel, 27 chromium
with columbium
S31266
24 chromium, 20
nickel, 6 molybdenum,
2 tungsten with
nitrogen
N08367
21 chromium, 25
nickel, 6.5 molybdenum
S32615
18 chromium, 20
nickel, 5.5 silicon
S30601 17.5 chromium, 17.5
nickel, 5.3 silicon
N08904
21 chromium, 26
nickel, 4.5 molybdenum
904LG
Other
Elements
...
...
N 0.10
0.030
2.00
0.045
0.030
0.75
13.517.5 17.020.0
4.05.0
...
...
N 0.100.20
5.07.0 0.030
0.010
1.00
16.018.0 23.025.0
4.05.0
0.10
...
N 0.400.60
0.020
0.015
0.30
31.033.0 26.028.0
...
0.61.0
...
2.04.0 0.035
0.020
1.00
21.024.0 23.025.0
5.26.2
...
...
Ce 0.050.10
Al 0.025
N 0.350.60
Cu 1.002.50
W 1.502.50
23.525.5 20.022.0
6.07.0
...
...
0.030
0.040.08
0.030
1.00
0.030
2.00
0.040
0.030
1.00
0.07
2.00
0.045
0.030
4.8-6.0
19.0-22.0
16.5-19.5
0.30-1.50
...
...
N 0.180.25
Cu 0.75
Cu 1.50-2.50
0.50-0.80 0.030
0.013
5.0-5.6
17.0-18.0
17.0-18.0
0.20
...
...
Cu 0.35, N 0.05
0.030
1.00
4.05.0
...
...
Cu 1.002.00
N 0.10
0.015
0.020
F 65
S32906
F 66
S32202
F 67
S32506
F 68
S32304
0.030
0.040
2.0
0.040
0.030
0.020
1.00
4.006.00 0.040
0.030
1.00
23.028.0 19.023.0
5.56.5
24.026.0
1.202.00
...
...
N 0.140.20
4.56.5
21.023.0
2.53.5
...
...
N 0.080.20
0.100.80
...
...
N 0.200.25
Cu 0.100.80
1.351.70 21.022.0
0.030
2.00
0.035
0.010
0.60
3.55.2
26.029.0
1.002.50
...
...
N 0.150.35
0.030
1.20
0.035
0.020
0.80
6.08.0
24.026.0
3.05.0
...
...
N 0.240.32
Cu 0.50
0.030
1.00
0.030
0.020
0.80
6.08.0
24.026.0
2.53.5
...
...
0.030
1.00
0.030
0.010
1.00
6.08.0
24.026.0
3.04.0
...
...
N 0.240.32
Cu 0.200.80
W 1.502.50
N 0.200.30
Cu 0.501.00
W 0.501.00O
0.025
0.80
0.025
0.002
0.80
6.58.0
24.026.0
3.04.0
...
...
0.030
1.50
0.035
0.020
0.80
5.58.0
24.026.0
3.05.0
...
...
0.030
2.00
0.030
0.020
1.00
4.56.5
22.023.0
3.03.5
...
...
N 0.140.20
0.040
1.50
0.040
0.030
1.00
4.56.5
24.027.0
2.93.9
...
...
Cu 1.502.50
N 0.100.25
0.801.50 0.030
0.030
0.80
5.87.5
28.030.0
1.52.6
...
...
Cu 0.80
N 0.300.40
0.45
...
...
N 0.180.26
0.030
0.030
2.00
0.040
0.010
1.00
0.030
1.00
0.040
0.015
0.90
5.57.2
24.026.0
3.03.5
...
...
N 0.080.20
W 0.050.30
0.030
2.50
0.040
0.030
1.00
3.05.5
21.524.5
0.050.60
...
...
N 0.050.20
Cu 0.050.60
252
1.002.80 21.524.0
Cu 1.202.00
W 0.801.20
N 0.230.33
N 0.200.35
Cu 0.503.00
This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.
S32550
25 chromium, 6.5
nickel, 4 molybdenum
with nitrogen
22 chromium, 5.5
nickel, 3 molybdenum,
modified with nitrogen
2205G
26 chromium, 6 nickel,
3.5 molybdenum with
nitrogen and copper
255G
29 chromium, 6.5
nickel, 2 molybdenum
with nitrogen
22 chromium, 2.0
nickel, 0.25
molybdenum with
nitrogen
25 chromium, 6 nickel,
3 molybdenum, with
nitrogen
and tungsten
23 chromium, 4 nickel,
with nitrogen
Titanium
4.05.0
F 61
F 57
Columbium
13.017.5 18.020.0
S32205
F 55
Molybdenum
0.75
F 60
F 54
Chromium
0.030
S32520
F 53
Nickel
0.045
F 59
F 52
Silicon
2.00
0.030
F 69
0.030
F 51
Continued
SA-182/SA-182M
No fu