1) The document requests information from Riziki and Bowo about an Isuzu chassis matched for an 8m3 transit mixer. It asks for confirmation of the width between beams, the length and width of single beams, and pictures of the Isuzu beams to check if they are straight or curved. It also asks if the Isuzu chassis will provide a driving shaft and the installation dimensions if so.
2) It additionally requests a clearer CAD or CDR file for a Sachindo logo to be painted, as well as details on the model planned to be matched for a 3m3 transit mixer from the Isuzu chassis and pictures.
1) The document requests information from Riziki and Bowo about an Isuzu chassis matched for an 8m3 transit mixer. It asks for confirmation of the width between beams, the length and width of single beams, and pictures of the Isuzu beams to check if they are straight or curved. It also asks if the Isuzu chassis will provide a driving shaft and the installation dimensions if so.
2) It additionally requests a clearer CAD or CDR file for a Sachindo logo to be painted, as well as details on the model planned to be matched for a 3m3 transit mixer from the Isuzu chassis and pictures.
1) The document requests information from Riziki and Bowo about an Isuzu chassis matched for an 8m3 transit mixer. It asks for confirmation of the width between beams, the length and width of single beams, and pictures of the Isuzu beams to check if they are straight or curved. It also asks if the Isuzu chassis will provide a driving shaft and the installation dimensions if so.
2) It additionally requests a clearer CAD or CDR file for a Sachindo logo to be painted, as well as details on the model planned to be matched for a 3m3 transit mixer from the Isuzu chassis and pictures.
1) The document requests information from Riziki and Bowo about an Isuzu chassis matched for an 8m3 transit mixer. It asks for confirmation of the width between beams, the length and width of single beams, and pictures of the Isuzu beams to check if they are straight or curved. It also asks if the Isuzu chassis will provide a driving shaft and the installation dimensions if so.
2) It additionally requests a clearer CAD or CDR file for a Sachindo logo to be painted, as well as details on the model planned to be matched for a 3m3 transit mixer from the Isuzu chassis and pictures.
Concerning isuze chassis matched for 8m3 transit mixer, pls check below points: 1. Please check attached and advise the width between both beam as per
attached red arrow.
2. Please confirm the length of beam is 5434mm and width of single beam is 80mm. Also pls take picture of isuze beam, we want to see if it is straight or curve shape on surface. 3. Pls advise if ISUZU chassis will provide driving shaft to you, I mean do you need us to provide driving shaft? if yes, please advise the installation dimensions of the flange plate (PTO) on the chassis. 4. Please send us the CDR format or CAD for sachindo Logo as the one we received from you is not clear and will be re-shaped and not clear when paited. Concerning isuze chassis matched for 3m3 transit mixer, pls check below points: 1. Pls advise which model you plan to match for isuzu chassis. 2. Pls also check the speci and points mentioned for 8m3 transit mixer. and pls take some pictures. Awaiting your quick reply. Regards Steven