Professional Documents
Culture Documents
Decanter BCC VFD Panel Recommendations R0
Decanter BCC VFD Panel Recommendations R0
61244585
Version:
00
Page 2 of 7
Contents
WARNING ...............................................................................................................................................................3
VFD Panel General Requirements ..........................................................................................................................4
Common DC bus system .........................................................................................................................................5
Other components in the VFD panel .......................................................................................................................5
Panel components layout example .......................................................................................................................... 7
WARNING
To avoid communication problems the following rules
are to be observed:
Version:
00
The cables used for Ethernet and Ethernet PowerLink networks are to be
S/FTP type (foil-shielded twisted pairs surrounded by an overall braided
shield) with shielded RJ45 jacks on both ends. Cable external diameter is
4.5 - 8 mm. The diameter of the core insulation must not exceed 1.6 mm.
Use the screened cable with twisted wires to bring 24VDC power to the
HMI.
Network cables parallel runs with power cables are not allowed.
Page 3 of 7
Version:
00
Page 4 of 7
Version:
00
Page 5 of 7
Version:
00
Page 6 of 7
Version:
00
Page 7 of 7