Professional Documents
Culture Documents
T and TL BOP Pipe Rams
T and TL BOP Pipe Rams
T and TL BOP Pipe Rams
Pipe rams are available for use in Cameron T and TL BOPs to fit all commonly used
sizes of tubing, drill pipe, drill collar or casing within the ranges in the following
charts. Cameron pipe rams include the following features:
Cameron pipe rams are self-feeding and incorporate a large reservoir of packer
rubber to ensure a long-lasting seal under all conditions.
Ram packers lock into place and are not dislodged by well flow.
Wear pads are included on all T and TL Rams.
Note: Cameron TL BOP rams can be used in the TL & T BOPs. For 18-3/4 T BOP ram assemblies with a base number of 644457 and/or ram block number of 644479, please
contact your Cameron Representative. These ram blocks may need to be modified
for use in the Cameron TL BOP.
TC1001-04
114
Ram
644401
Packer
644486
Blind
( )-01
( )-01
( )-01
1.315
( )-02
( )-02
( )-02
1.660
( )-03
( )-03
( )-03
1.900
( )-04
( )-04
( )-04
2.062
( )-05
( )-05
( )-05
2.375
( )-06
( )-06
( )-06
2.875
( )-07
( )-07
( )-07
3.500
( )-08
( )-08
( )-08
4.000
( )-10
( )-10
( )-10
4.500
( )-12
( )-12
( )-12
4.750
( )-14
( )-14
( )-14
5.000
( )-15
( )-15
( )-15
5.500
( )-17
( )-17
( )-17
5.562
---
---
---
5.875
( )-25
( )-25
( )-25
6.000
( )-18
( )-18
( )-18
6.625
( )-19
( )-19
( )-19
7.000
( )-20
( )-20
( )-20
7.625
( )-21
( )-21
( )-21
8.625
( )-22
( )-22
( )-22
9.000
( )-23
( )-23
( )-23
9.625
( )-24
( )-24
( )-24
10.750
---
---
---
11.750
---
---
---
13.375
---
---
---
13.500
---
---
---
13.625
---
---
---
14.000
---
---
---
3.500 Aluminum
( )-09
( )-09
( )-09
4.000 Aluminum
( )-11
( )-11
( )-11
4.500 Aluminum
( )-13
( )-13
( )-13
5.000 Aluminum
( )-16
( )-16
( )-16
Base numbers remain the same unless otherwise noted. Dash numbers change by pipe size.
***Additional part numbers include: right side wear pad, 2011277-01; left side wear pad, 2011277-02 and screws, (4) 644349-01.
Note: Cameron TL BOP rams can be used in the TL & T BOPs. For 18-3/4 T BOP ram assemblies with a base number of 644457 and/or
ram block number of 644479, please contact your Cameron Representative. These ram blocks may need to be modified for use in the
Cameron TL BOP.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
TC1001-04
115
Base numbers remain the same unless otherwise noted. Dash numbers change by pipe size.
*Additional part numbers include: right side wear pad, 2011279-01; left side wear pad, 2011279-02 and screws, (4) 644349-01.
**Additional part numbers include: right side wear pad, 2011281-01; left side wear pad, 2011281-02 and screws, (4) 644349-02.
Note: Cameron TL BOP Rams can be used in the TL & T BOPs. For 18-3/4" T BOP ram assemblies with a base number of
644457 and/or ram block number of 644479, please contact your Camron Representative. These ram blocks may need to be
modified for use in the Cameron TL BOP.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
TC1001-04
116
Description
Upper SBR
644591-01
18-3/4 T BOP
Lower SBR
644591-02
Upper SBR
2163096-01
Lower SBR
2163096-02
Body
644402-01
644402-02
2163095-01
2163095-02
Right Packer
644490-01
644490-01
644893-01-00-01
644893-01-00-01
Left Packer
644490-02
644490-02
644893-02-00-01
644893-02-00-01
Top Seal
644409-01-00-01
644409-01-00-01
644369-01-00-01
644369-01-00-01
Blade Packer
644541-01
---
644894-01-00-01
---
2011277-01
2011277-01
2011279-01
2011279-01
2011277-02
2011277-02
2011279-02
2011279-02
Screw (4)
644349-01
644349-01
644349-01
644349-01
Blade Insert
644581-01-00-01
644581-02-00-01
644519-03
644519-02
10
Screw (2)
644582-01
---
644524-01
---
11
Pin (2)
---
200231
---
200231
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
TC1001-04
117