Professional Documents
Culture Documents
KPI Reference
KPI Reference
KPI Reference
KPI Reference
Version: V2.03.03
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://support.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2014 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited.
Revision History
Revision No.
Revision Date
Revision Reason
R1.0
20140402
First edition
SJ-20140402111402-007|20140402 (R1.0)
Contents
About This Manual ......................................................................................... I
Chapter 1 Radio Link KPIs......................................................................... 1-1
1.1 RadioLink Availability.......................................................................................... 1-1
1.2 EFS................................................................................................................... 1-1
1.3 EB..................................................................................................................... 1-2
1.4 ES..................................................................................................................... 1-2
1.5 SES .................................................................................................................. 1-2
1.6 BBE .................................................................................................................. 1-2
1.7 UAS .................................................................................................................. 1-3
1.8 Max MSE........................................................................................................... 1-3
1.9 Min MSE............................................................................................................ 1-3
1.10 Mean MSE....................................................................................................... 1-3
III
SJ-20140402111402-007|20140402 (R1.0)
Glossary .......................................................................................................... I
IV
SJ-20140402111402-007|20140402 (R1.0)
Intended Audience
This manual is intended for:
l
l
l
System engineers
Testing engineers
Planning engineers
This manual complies with but not limited to the following standards :
SN
Standard No.
Standard Name
ITU-T G.826
RFC2819
ITU-T G.828
ITU-T G.829
Summary
Gives the description, unit, statistics object, and statistics period of the
KPIs related to radio link.
2, RF KPIs
Gives the description, unit, statistics object, and statistics period of the
KPIs related to ACM port.
Gives the description, unit, statistics object, and statistics period of the
KPIs related to XPIC port.
5, E1 BER KPIs
Gives the description, unit, statistics object, and statistics period of the
KPIs related to E1 BER.
Gives the description, unit, statistics object, and statistics period of the
KPIs related to TDM port.
I
SJ-20140402111402-007|20140402 (R1.0)
Chapter
Summary
9, VLAN KPIs
10, Environment
Gives the description, unit, statistics object, and statistics period of the
Temperature KPIs
II
SJ-20140402111402-007|20140402 (R1.0)
Chapter 1
RadioLink Availability
Description
Unit
Statistical object
Radio link
Statistical period
24 hours
1.2 EFS
Name
EFS
Description
This KPI measures the number of seconds without error blocks in a 15minute
or 24hour period.
Unit
Seconds
Statistical object
Radio link
Statistical period
1-1
SJ-20140402111402-007|20140402 (R1.0)
1.3 EB
Name
EB
Description
This KPI measures the number of errored blocks within 15 minutes or 24 hours,
that is, the errored blocks containing one or multiple error bits.
Unit
Block
Statistical object
Radio link
Statistical period
Name
ES
Description
This KPI measures the number of seconds with one or multiple error bits in a
1.4 ES
15minutes or 24hour period.
Unit
Seconds
Statistical object
Radio link
Statistical period
1.5 SES
Name
SES
Description
This KPI measures the number of seconds during which the percent of errored
blocks of the total blocks is at least 30% within a statistical period (15 minutes
or 24 hours).
Unit
Seconds
Statistical object
Radio link
Statistical period
1.6 BBE
Name
BBE
Description
This KPI measures the number of errored blocks not contained in SES.
Unit
Block
Statistical object
Radio link
Statistical period
SJ-20140402111402-007|20140402 (R1.0)
1.7 UAS
Name
UAS
Description
The UAS status is detected after 10 consecutive SESs occur. The starting time
of UAS is counted from the first second after 10 consecutive SESs occur. When
10 consecutive non-SESs occur, the UAS status is cancelled.
This KPI measures the time from the first second after 10 consecutive SESs
occur to the last second before 10 consecutive non-SESs occur.
Unit
Seconds
Statistical object
Radio link
Statistical period
Max MSE
Description
This KPI measures the maximum Mean Square Error (MSE) of the received
signals withwithin a statistical period. In mathematical statistics, MSE refers to
the expected value of the squared difference between the estimator and the
true value. It is used to describe the Signal Noise Rate (SNR).
Unit
dB
Statistical object
Radio link
Statistical period
Min MSE
Description
This KPI measures the minimum MSE of the received signals within a period.
Unit
dB
Statistical object
Radio link
Statistical period
Mean MSE
Description
This KPI measures the average MSE of the received signals within a period.
Unit
dB
1-3
SJ-20140402111402-007|20140402 (R1.0)
Statistical object
Radio link
Statistical period
1-4
SJ-20140402111402-007|20140402 (R1.0)
Chapter 2
RF KPIs
Table of Contents
Min Tx Power .............................................................................................................2-1
Max Tx Powers ..........................................................................................................2-1
Mean Tx Power ..........................................................................................................2-2
Min Received Signal Level .........................................................................................2-2
Max Received Signal Level .......................................................................................2-2
Mean Recevived Signal Level ....................................................................................2-2
Percent of RSL Value over the High Threshold...........................................................2-3
Percent of RSL Value under the Low Threshold .........................................................2-3
RLTS-1.......................................................................................................................2-3
RLTS-2.......................................................................................................................2-4
TLTS ..........................................................................................................................2-4
Anti-Burst Received Signal Level................................................................................2-4
Anti-Fading Received Signal Level .............................................................................2-4
Min Tx Power
Description
This KPI measures the real-time minimum transmission power, and the
minimum transmission power within 15 minutes or 24 hours.
Unit
dBm
Statistical object
ODU
Statistical period
Max Tx Power
Description
This KPI measures the real-time maximum transmission power, and the
maximum transmission power within 15 minutes or 24 hours.
Unit
dBm
Statistical object
ODU
Statistical period
2-1
SJ-20140402111402-007|20140402 (R1.0)
Mean Tx Power
Description
This KPI measures the real-time average transmission power, and the average
transmission power within 15 minutes or 24 hours.
Unit
dBm
Statistical object
ODU
Statistical period
Description
This KPI measures the real-time minimum receiving level, and the minimum
receiving level within 15 minutes or 24 hours.
Unit
dBm
Statistical object
ODU
Statistical period
Description
This KPI measures the real-time maximum receiving level, and the maximum
receiving level within 15 minutes or 24 hours.
Unit
dBm
Statistical object
ODU
Statistical period
Description
This KPI measures the real-time average receiving level, and the average
receiving level within 15 minutes or 24 hours.
Unit
dBm
Statistical object
ODU
2-2
SJ-20140402111402-007|20140402 (R1.0)
Chapter 2 RF KPIs
Statistical period
Description
This KPI measures the percent of power being higher than the upper power
threshold of ODU. You can set the upper threshold (RSLHighThrshd) through
Performance > Performance Threshold in the LMT window.
Unit
Statistical object
ODU
Statistical period
Description
This KPI measures the percent of power being lower than the lower power
threshold of ODU. You can set the lower threshold (RSLLowThrshd) through
Performance > Performance Threshold in the LMT window.
Unit
Statistical object
ODU
Statistical period
2.9 RLTS-1
Name
Description
This KPI measures the duration of the receive level being lower than
ODU receive level threshold1. You can set the RLTS-1 threshold
through Performance > Performance Threshold in the LMT window.
Unit
Second
Statistical object
ODU
Statistical period
2-3
SJ-20140402111402-007|20140402 (R1.0)
2.10 RLTS-2
Name
Description
This KPI measures the duration of the receive level being lower than
ODU receive level threshold2. You can set the RLTS-2 threshold
through Performance > Performance Threshold in the LMT window.
Unit
Second
Statistical object
ODU
Statistical period
2.11 TLTS
Name
Description
This KPI measures the duration of the transmit power being higher than
the threshold. You can set the TLTS threshold through Performance >
Performance Threshold in the LMT window.
Unit
Second
Statistical object
ODU
Statistical period
Description
Normally, 99.9% of the receiving level is lower than the value of this KPI. The
smaller the difference between this value and the average value, the smaller
interference of the periodical burst signal.
This KPI measures the threshold value of receiving level larger than 99.9%
of the receiving level.
Unit
dBm
Statistical object
ODU
Statistical period
SJ-20140402111402-007|20140402 (R1.0)
Chapter 2 RF KPIs
Description
Normally, 0.1% of the receiving level is lower than the value of this KPI. The
smaller the difference between the average value and this value, the smaller
fading interference of the periodical burst signal. This KPI measures the
threshold value of receiving level smaller than 0.1% of the receiving level.
Unit
dBm
Statistical object
ODU
Statistical period
2-5
SJ-20140402111402-007|20140402 (R1.0)
2-6
SJ-20140402111402-007|20140402 (R1.0)
Chapter 3
Table of Contents
Working Time Of RX QPSK .......................................................................................3-1
Working Time Of RX 16QAM......................................................................................3-2
Working Time Of RX 32QAM .....................................................................................3-2
Working Time Of RX 64QAM......................................................................................3-2
Working Time Of RX 128QAM....................................................................................3-2
Working Time Of RX 256QAM ...................................................................................3-3
Working Time of RX 512QAM.....................................................................................3-3
Working Time of RX 1024QAM...................................................................................3-3
Switch Numbers of RX Modulaiton .............................................................................3-4
Working Time Of TX QPSK ........................................................................................3-4
Working Time Of TX 16QAM ......................................................................................3-4
Working Time Of TX 32QAM .....................................................................................3-5
Working Time Of TX 64QAM .....................................................................................3-5
Working Time Of TX 128QAM ...................................................................................3-5
Working Time Of TX 256QAM ...................................................................................3-5
Working Time of TX 512QAM .....................................................................................3-6
Working Time of TX 1024QAM ..................................................................................3-6
Switch Numbers of TX Modulaiton..............................................................................3-6
Description
This KPI measures the length of time during which the radio link uses
the QPSK modulation/demodulation mode in the receiving direction in
the statistical period.
Unit
Seconds
Statistical object
Radio link
Statistical period
3-1
SJ-20140402111402-007|20140402 (R1.0)
Unit
Seconds
Statistical object
Radio link
Statistical period
Description
This KPI measures the length of time during which the radio link uses
the 32QAM modulation/demodulation mode in the receiving direction
in the statistical period.
Unit
Seconds
Statistical object
Radio link
Statistical period
Description
This KPI measures the length of time during which the radio link uses
the 64QAM modulation/demodulation mode in the receiving direction
in the statistical period.
Unit
Seconds
Statistical object
Radio link
Statistical period
3-2
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the length of time during which the radio link uses
the 128QAM modulation/demodulation mode in the receiving direction
in the statistical period.
Unit
Seconds
Statistical object
Radio link
Statistical period
Description
This KPI measures the length of time during which the radio link uses
the 256QAM modulation/demodulation mode in the receiving direction
in the statistical period.
Unit
Seconds
Statistical object
Radio link
Statistical period
Description
This KPI measures the length of time during which the radio link uses
the 512QAM modulation/demodulation mode in the receiving direction
in the statistical period.
Unit
Second
Statistical object
Radio link
Statistical period
Description
This KPI measures the length of time during which the radio link
uses the 1024QAM modulation/demodulation mode in the receiving
direction in the statistical period.
Unit
Second
3-3
SJ-20140402111402-007|20140402 (R1.0)
Statistical object
Radio link
Statistical period
Description
Unit
Number of
Statistical object
Radio link
Statistical period
Unit
Seconds
Statistical object
Radio link
Statistical period
Description
This KPI measures the length of time during which the radio link
uses the 16QAM modulation/demodulation mode in the transmitting
direction in the statistical period.
Unit
Seconds
Statistical object
Radio link
Statistical period
3-4
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the length of time during which the radio link
uses the 32QAM modulation/demodulation mode in the transmitting
direction in the statistical period.
Unit
Seconds
Statistical object
Radio link
Statistical period
Description
This KPI measures the length of time during which the radio link
uses the 64QAM modulation/demodulation mode in the transmitting
direction in the statistical period.
Unit
Seconds
Statistical object
Radio link
Statistical period
Description
This KPI measures the length of time during which the radio link
uses the 128QAM modulation/demodulation mode in the transmitting
direction in the statistical period.
Unit
Seconds
Statistical object
Radio link
Statistical period
3-5
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the length of time during which the radio link
uses the 256QAM modulation/demodulation mode in the transmitting
direction in the statistical period.
Unit
Seconds
Statistical object
Radio link
Statistical period
Description
This KPI measures the length of time during which the radio link
uses the 512QAM modulation/demodulation mode in the transmitting
direction in the statistical period.
Unit
Second
Statistical object
Radio link
Statistical period
Description
This KPI measures the length of time during which the radio link uses
the 1024QAM modulation/demodulation mode in the transmitting
direction in the statistical period.
Unit
Second
Statistical object
Radio link
Statistical period
Description
Unit
Number of
Statistical object
Radio link
3-6
SJ-20140402111402-007|20140402 (R1.0)
Statistical period
3-7
SJ-20140402111402-007|20140402 (R1.0)
3-8
SJ-20140402111402-007|20140402 (R1.0)
Chapter 4
Table of Contents
MAX XPI ....................................................................................................................4-1
MIN XPI .....................................................................................................................4-1
EXCEED XPI .............................................................................................................4-2
MAX XPI
Description
Unit
dB
Statistical object
Statistical period
MIN XPI
This KPI measures the minimum polarization of dual-polarized antenna
during the Statistical period. The allowed range is 0100 but the value
is normally within the range 560. A greater value is the normal range
indicates smaller co-channel interference.
Unit
dB
Statistical object
Statistical period
4-1
SJ-20140402111402-007|20140402 (R1.0)
Exceed XPI
Description
This KPI measures the length of time during which the predefined XPI threshold
is exceeded in the statistical period.
Unit
Second
Statistical object
Statistical period
4-2
SJ-20140402111402-007|20140402 (R1.0)
Chapter 5
E1 BER KPIs
Table of Contents
E1 BER ......................................................................................................................5-1
5.1 E1 BER
Name
E1 BER
Description
This KPI measures the number of times when bit error occurs on E1 port.
Unit
Number of
Statistical object
Statistical period
5-1
SJ-20140402111402-007|20140402 (R1.0)
5-2
SJ-20140402111402-007|20140402 (R1.0)
Chapter 6
Description
This KPI measures the real-time minimum receiving power of the optical
module, and records the minimum receiving power of the optical module within
15 minutes or 24 hours.
Unit
dBm
Statistical object
Statistical period
Description
This KPI measures the real-time maximum receiving power of the optical
module, and records the maximum receiving power of the optical module within
15 minutes or 24 hours.
Unit
dBmw
Statistical object
Statistical period
6-1
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the real-time minimum transmitting power of the optical
module, and records the minimum transmitting power of the optical module
within 15 minutes or 24 hours.
Unit
dBmw
Statistical object
Statistical period
Description
This KPI measures the real-time maximum transmitting power of the optical
module, and records the maximum transmitting power of the optical module
within 15 minutes or 24 hours.
Unit
dBmw
Statistical object
Statistical period
Description
The UAS status is detected after 10 consecutive SESs occur at the regenerator
section. The starting time of UAS is counted from the first second of the 10
consecutive SESs. When 10 consecutive non-SESs occur at the regenerator
section, the UAS status is cancelled.
This KPI measures the time from the first second of the 10 consecutive SESs
to the last second before 10 consecutive non-SESs occur at the regenerator
section.
Unit
Seconds
Statistical object
Statistical period
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the number of seconds during which one or multiple
decoding errors occur at the regenerator section within 15 minutes or 24 hours.
Unit
Seconds
Statistical object
Statistical period
Description
This KPI measures the number of seconds during which the percent of errored
blocks of the total RS blocks is at least 30% in a regenerator section Statistical
period (15 minutes or 24 hours).
Unit
Seconds
Statistical object
Statistical period
Description
This KPI measures the number of errored blocks not contained in SES at the
regenerator section within 15 minutes or 24 hours.
Unit
Number of
Statistical object
Statistical period
Description
The UAS status is detected after 10 consecutive SESs occur at the multiplex
section. The starting time of UAS is counted from the first second of the 10
consecutive SESs. When 10 consecutive non-SESs occur at the multiplex
section, the UAS status is cancelled.
This KPI measures the time from the first second of the 10 consecutive SESs to
the last second before 10 consecutive non-SESs occur at the multiplex section.
6-3
SJ-20140402111402-007|20140402 (R1.0)
Unit
Seconds
Statistical object
Statistical period
Unit
Seconds
Statistical object
Statistical period
Description
This KPI measures the number of seconds during which the percent of errored
blocks of the total blocks at the multiplex section is at least 15% within a
statistical period (15 minutes or 24 hours).
Unit
Seconds
Statistical object
Statistical period
Description
This KPI measures the number of errored blocks not contained in SES at the
multiplex section within 15 minutes or 24 hours.
Unit
Number of
Statistical object
Statistical period
6-4
SJ-20140402111402-007|20140402 (R1.0)
Chapter 7
7-1
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the number of octets of normal frames received at the ETH
port towards ODU or at the network port.
l
Unit
Byte
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of octets of normal frames sent at the ETH port
towards ODU or at the network port.
l
Unit
Byte
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames received at the ETH port from ODU or
at the network port, including error frames.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames sent at the ETH port from ODU or at
the network port, including error frames.
7-2
SJ-20140402111402-007|20140402 (R1.0)
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames received at the ETH port from ODU
or at the network port, of which the frame length is smaller than 64 octets and
the FCS check is valid.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames, of which the frame length is 64
octets, received at the ETH port from ODU or at the network port, including
the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames, of which the frame length is 64 octets,
sent at the ETH port from ODU or at the network port, including the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
7-3
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the number of frames, of which the frame length is 65 to
127 octets, received at the ETH port from ODU or at the network port, including
the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames, of which the frame length is 65 to
127 octets, sent at the ETH port from ODU or at the network port, including
the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames, of which the frame length is 128 to
255 octets, received at the ETH port from ODU or at the network port, including
the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames, of which the frame length is 128 to
255 octets, sent at the ETH port from ODU or at the network port, including
the error frame.
7-4
SJ-20140402111402-007|20140402 (R1.0)
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames, of which the frame length is 256 to
511 octets, received at the ETH port from ODU or at the network port, including
the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames, of which the frame length is 256 to
511 octets, sent at the ETH port from ODU or at the network port, including
the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames, of which the frame length is 512
to 1023 octets, received at the ETH port from ODU or at the network port,
including the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
7-5
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the number of frames, of which the frame length is 512 to
1023 octets, sent at the ETH port from ODU or at the network port, including
the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames, of which the frame length is 1024
to 1518 octets, received at the ETH port from ODU or at the network port,
including the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames, of which the frame length is 1024 to
1518 octets, sent at the ETH port from ODU or at the network port, including
the error frame.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of CRC error frames received at the ETH port
from ODU or at the network port, including only the frames with length of 64 to
1518 octets.
7-6
SJ-20140402111402-007|20140402 (R1.0)
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames received at the ETH port from ODU
or at the network port, of which the frame length is greater than 1518 octets
and the FCS check is valid.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of frames received at the ETH port from ODU
or at the network port, of which the frame length is greater than 1518 octets
and the FCS check is invalid.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of broadcast frames received at the ETH port
from ODU or at the network port, excluding error frames and multicast frames.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
7-7
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the number of broadcast frames sent at the ETH port from
ODU or at the network port, excluding error frames and multicast frames.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of multicast frames received at the ETH port
from ODU or at the network port, excluding error frames and broadcast frames.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of multicast frames sent at the ETH port from
ODU or at the network port, excluding error frames and broadcast frames.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
Statistical period
Description
This KPI measures the number of filtered-out frames at the ingress of the ETH
port from ODU or the network port, including RxQosDiscard frames.
Unit
Number of
Statistical object
Optical and electrical ETH interfaces on the RCUB, RTUH, or RTUN board
7-8
SJ-20140402111402-007|20140402 (R1.0)
Statistical period
Description
This KPI measures the number of PAUSE packets due to excessive traffic,
received at the ETH port from ODU or at the network port.
Unit
Frame
Statistical object
Electrical and optical ETH interfaces on the RCUB, RTUH, and RTUN boards
Statistical period
Unit
Frame
Statistical object
Electrical and optical ETH interfaces on the RCUB, RTUH, and RTUN boards
Statistical period
Description
This KPI measures the number of frames, of which the frame length is greater
than 1518 octets and the FCS check is valid, transmitted at the ETH port from
ODU or at the network port.
Unit
Frame
Statistical object
Electrical and optical ETH interfaces on the RCUB, RTUH, and RTUN boards
Statistical period
7-9
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the number of frames, of which the frame length is smaller
than 64 octets and the FCS check is invalid, received at the ETH port from
ODU or at the network port.
Unit
Frame
Statistical object
Electrical and optical ETH interfaces on the RCUB, RTUH, and RTUN boards
Statistical period
7-10
SJ-20140402111402-007|20140402 (R1.0)
Chapter 8
Description
This KPI measures the maximum throughput of Ethernet frames sent to ODU
within a statistical period.
Unit
Mbps
Statistical object
WLETH interface
Statistical period
15 minutes or 24 hours
Description
This KPI measures the minimum throughput of Ethernet frames sent to ODU
within a statistical period.
Unit
Mbps
Statistical object
WLETH interface
Statistical period
15 minutes or 24 hours
8-1
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the average throughput of Ethernet frames sent to ODU
within a statistical period.
Unit
Mbps
Statistical object
WLETH interface
Statistical period
15 minutes or 24 hours
Description
This KPI measures the maximum capacity of radio links allocated for Ethernet
services within a statistical period.
Unit
Mbps
Statistical object
WLETH interface
Statistical period
15 minutes or 24 hours
Description
This KPI measures the minimum capacity of radio links allocated for Ethernet
serviceswithin a statistical period.
Unit
Mbps
Statistical object
WLETH interface
Statistical period
15 minutes or 24 hours
Description
This KPI measures the average capacity of radio links allocated for Ethernet
serviceswithin a statistical period.
Unit
Mbps
8-2
SJ-20140402111402-007|20140402 (R1.0)
Statistical object
WLETH interface
Statistical period
15 minutes or 24 hours
Description
This KPI measures the maximum utilization of Ethernet services in the radio link.
The equipment calculates the utilization every second, and gets the maximum
value within a statistical period.
Unit
Statistical object
WLETH interface
Statistical period
15 minutes or 24 hours
Description
This KPI measures the minimum utilization of Ethernet services in the radio link.
The equipment calculates the utilization every second, and gets the minimum
value within a statistical period.
Unit
Statistical object
WLETH interface
Statistical period
15 minutes or 24 hours
Description
This KPI measures the average utilization of Ethernet services in the radio link.
The equipment calculates the utilization every second, and gets the average
value in a statistics period.
Unit
Statistical object
WLETH interface
Statistical period
15 minutes or 24 hours
8-3
SJ-20140402111402-007|20140402 (R1.0)
8-4
SJ-20140402111402-007|20140402 (R1.0)
Chapter 9
VLAN KPIs
Table of Contents
Per VLAN Rx Frames .................................................................................................9-1
Description
Unit
Number of
Statistical object
Ethernet interface
Statistical period
9-1
SJ-20140402111402-007|20140402 (R1.0)
9-2
SJ-20140402111402-007|20140402 (R1.0)
Chapter 10
Environment Temperature
KPIs
Table of Contents
Max Environment Temperature.................................................................................10-1
Min Environment Temperature..................................................................................10-1
Mean Environment Temperature...............................................................................10-2
Max CPU Utilization .................................................................................................10-2
Min CPU Utilization ..................................................................................................10-2
Mean CPU Utilization ...............................................................................................10-2
Max Memory Utilization ............................................................................................10-3
Min Memory Utilization .............................................................................................10-3
Mean Memory Utilization ..........................................................................................10-3
Description
This KPI measures the maximum value of temperatures at the air inlet for the
fan within a period.
Unit
Statistical object
Statistical period
Description
This KPI measures the minimum value of temperatures at the air inlet for the
fan within a period.
Unit
Statistical object
Statistical period
10-1
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the average value of temperatures at the air inlet for the
fan within a period.
Unit
Statistical object
Statistical period
Description
This KPI measures the maximum CPU utilization within a statistical period.
Unit
Statistical object
Statistical period
Description
This KPI measures the minimum CPU utilization within a statistical period.
Unit
Statistical object
Statistical period
Description
This KPI measures the mean CPU utilization within a statistical period.
Unit
Statistical object
Statistical period
10-2
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the maximum memory utilization within a statistical period.
Unit
Statistical object
Statistical period
Description
This KPI measures the minimum memory utilization within a statistical period.
Unit
Statistical object
Statistical period
Description
This KPI measures the mean memory utilization within a statistical period.
Unit
Statistical object
Statistical period
10-3
SJ-20140402111402-007|20140402 (R1.0)
10-4
SJ-20140402111402-007|20140402 (R1.0)
Chapter 11
CES KPIs
Table of Contents
CESoETH Frames Transmitted ................................................................................11-1
Payload Octets Transmitted .....................................................................................11-1
CESoETH Frames Received ....................................................................................11-1
Payload Octets Received .........................................................................................11-2
Lost Frames .............................................................................................................11-2
Re-Ordered Frames .................................................................................................11-2
Malformed Frames ...................................................................................................11-3
Jitter Buffer Overruns ...............................................................................................11-3
Description
This KPI measures the number of CESoETH frames transmitted from the
sending end within a statistical period.
Unit
Frame
Statistical object
Statistical period
Description
This KPI measures the number of CESoETH payload octets transmitted from
the sending end within a statistical period.
Unit
Byte
Statistical object
Statistical period
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the number of CESoETH frames received by the receiving
end within a statistical period.
Unit
Frame
Statistical object
Statistical period
Description
This KPI measures the number of CESoETH payload octets received by the
receiving end within a statistical period.
Unit
Byte
Statistical object
Statistical period
Lost Frames
Description
This KPI measures the number of lost CES frames within a statistical period.
Disordered and lost CESoETH frames can be detected through the frame
number, RTP header, or control word. The system first re-arranges the
disordered CESoETH frames, and drops these frames if the re-arrangement
fails.
This KPI measures the total number of lost CESoETH frames and those
dropped due to re-arrangement failure.
Unit
Frame
Statistical object
Statistical period
Re-Ordered Frames
11-2
SJ-20140402111402-007|20140402 (R1.0)
Description
This KPI measures the number of re-ordered CES frames within a statistical
period.
Disordered and lost CESoETH frames can be detected through the frame
number, RTP header, or control word. The system first re-arranges the
disordered CESoETH frames. If the re-arrangement succeeds, the frames
are counted as re-ordered frames. If the re-arrangement fails, the frames are
counted as lost frames.
Unit
Frame
Statistical object
Statistical period
Malformed Frames
Description
This KPI measures the number of malformed CES frames received within a
statistical period.
If the CESoETH frames defect indicator L is equal to 0, the included TDM data
is valid and the payload number can be determined.
If the actually received payload number is different from that defined, the frame
is a malformed frame.
Unit
Frame
Statistical object
Statistical period
Description
This KPI measures the number of CES frames overflowed from the jitter buffer.
The jitter buffer stores the data from CESoETH frames to eliminate delay jitter
of CESoETH frames.
The system extracts data from the jitter buffer in a fixed rate and converts the
data into TDM data.
If the delay jitter of the CESoETH frames is too large, the jitter buffer may fail to
store the latest valid CESoETH frames. As a result, the jitter buffer overflows.
If the jitter buffer overflows, the system discards the CESoETH frames that
fail to access the jitter buffer.
Unit
Frame
Statistical object
SJ-20140402111402-007|20140402 (R1.0)
Statistical period
11-4
SJ-20140402111402-007|20140402 (R1.0)
Glossary
ACM
- Adaptive Coding and Modulation
BBE
- Background Block Error
CES
- Circuit Emulation Service
CPU
- Central Processing Unit
EB
- Errored Block
EFS
- Error Free Second
ES
- Errored Second
KPI
- Key Performance Indicator
MSE
- Mean Square Error
ODU
- Outdoor Unit
RF
- Radio Frequency
RMU
- Radio Modulation Unit
RTUA
- Radio Traffic Unit A
RTUB
- Radio Traffic Unit B
RTUC
- Radio Traffic Unit C
RTUD
- Radio Traffic Unit D
RTUH
- Radio Traffic Unit H
I
SJ-20140402111402-007|20140402 (R1.0)
SES
- Severely Errored Second
TDM
- Time Division Multiplexing
UAS
- Unavailable Seconds
VLAN
- Virtual Local Area Network
XPIC
- Cross Polarization Interference Canceller
II
SJ-20140402111402-007|20140402 (R1.0)