Iso

International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an
International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee.
When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for
processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a
vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria
remaining the same.
CD registered
Period from 01 March to 31 March 2012
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 1
Screw threads
ISO/CD 16239
Metric series wires for measuring screw threads
TC 8
Ships and marine technology
ISO/CD 17682
Ships and marine technology Methodology for launching ship utilizing air bags
TC 22
Road vehicles
ISO/CD 7637-3
Road vehicles Electrical disturbances from conduction and coupling Part 3: Electrical transient
transmission by capacitive and inductive coupling via lines other than supply lines
ISO
10605:2008/CD
Amd 1
Road vehicles Test methods for electrical disturbances from electrostatic discharge Amendment 1
ISO/CD 11451-2
Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated
electromagnetic energy Part 2: Off-vehicle radiation sources
ISO/CD 11451-3
Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated
electromagnetic energy Part 3: On-board transmitter simulation
ISO/CD 11452-1
Road vehicles Component test methods for electrical disturbances from narrowband radiated
electromagnetic energy Part 1: General principles and terminology
ISO/CD 11452-8
Road vehicles Component test methods for electrical disturbances from narrowband radiated
electromagnetic energy Part 8: Immunity to magnetic fields
ISO/CD 11898-6
Road vehicles - Controller area network (CAN) Part 6: High-speed medium access unit with selective
wake-up functionality
ISO/CD 12405-3
Electrically propelled road vehicles - Test specification for Lithium-ion traction battery packs and systems
Part 3: Safety performance requirements
ISO/DPAS 16898
Electrically propelled road vehicles Battery system design Requirements on dimensions for lithium-ion
cells for vehicle propulsion
TC 35
Paints and varnishes
ISO/CD 4618
Paints and varnishes Terms and definitions
ISO/CD 11126-10
Preparation of steel substrates before application of paints and related products Specifications for nonmetallic blast-cleaning abrasives Part 10: Almandite garnet
TC 37
Terminology and other language and content resources
ISO/CD 17100
Translation Services Requirements for translation services
TC 43
Acoustics
ISO 101401:2010/CD Amd

2
Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules
for specific products Amendment 2: Rainfall noise
ISO 101405:2010/CD Amd

1
Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for
test facilities and equipment Amendment 1: Rainfall noise
TC 45
Rubber and rubber products
ISO/CD 815-1
Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated

temperatures
ISO/CD 815-2
Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures
ISO/CD 6914
Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress

relaxation in tension
ISO/CD 976
Rubber and plastics Polymer dispersions and rubber latices Determination of pH
ISO/CD 17403
Rubber Determination of magnesium content of field and concentrated natural rubber latex by titration
(cyanide-free method)
TC 61
Plastics
ISO/CD 11403-1
Plastics Acquisition and presentation of comparable multipoint data Part 1: Mechanical properties
TC 69
Applications of statistical methods
ISO/CD 7870-5
Control charts Part 5: Specialized control charts
ISO/CD 16336
Robust parameter design (RPD)
TC 127
Earth-moving machinery
ISO/CD 8643
Earth-moving machinery Hydraulic excavator and backhoe loader boom-lowering control device
Requirements and tests
TC 142
Cleaning equipment for air and other gases
ISO/CD 15858
UV-C Devices Safety information
TC 146
Air quality
ISO/CD 16000-21
Indoor air Part 21: Detection and enumeration of moulds Sampling from materials
ISO/CD 16000-29
Indoor air Part 29: Test methods for VOC detectors
ISO/CD 16000-30
Indoor air Part 30: Sensory testing of indoor air
ISO/CD 16000-31
Indoor air Part 31: Measurement of flame retardants and plasticizers based on organophosphorus
compounds Phosphoric acid ester
ISO/CD 16000-32
Indoor air Part 32: Investigation of constructions on pollutants and other injurious factors Inspections
TC 147
Water quality
ISO/CD 13166
Water quality Uranium isotopes Test method using alpha spectrometry
ISO/CD 16778
Water quality Calanoid copepod development test with Acartia tonsa
TC 150
Implants for surgery
ISO/CD 12891-2
Retrieval and analysis of surgical implants Part 2: Analysis of retrieved metallic surgical implants
ISO/CD 12891-3
Retrieval and analysis of surgical implants Part 3: Analysis of retrieved polymeric surgical implants
ISO/CD 12891-4
Retrieval and analysis of surgical implants Part 4: Analysis of retrieved ceramic surgical implants
TC 154
Processes, data elements and documents in commerce, industry and administration
ISO/CD 17369
Statistical data and metadata exchange (SDMX)
TC 172
Optics and photonics
ISO/CD 10343
Ophthalmic instruments Ophthalmometers
ISO/DTS 24348
Ophthalmic optics Spectacle frames Method for the simulation of wear and detection of nickel release
from metal and combination spectacle frames
TC 184
Automation systems and integration
ISO/CD 10303242
Industrial automation systems and integration Product data representation and exchange Part 242:
Application protocol: Managed Model-based 3D Engineering
TC 188
Small craft
ISO/CD 10239
Small craft Liquefied petroleum gas (LPG) systems
TC 207
Environmental management
ISO/DTR 14069
Greenhouse gases (GHG) Quantification and reporting of GHG emissions for organizations
(Carbonfootprint of organization) Guidance for the application of ISO 14064-1
TC 210
Quality management and corresponding general aspects for medical devices
IEC/CD 80369-3
Small-bore connectors for liquids and gases in healthcare applications Part 3: Connectors for enteral
applications
ISO/CD 80369-7
Small bore connectors for liquids and gases in healthcare applications Part 7: Connectors with 6% (Luer)
taper for intravascular or hypodermic applications
TC 214
Elevating work platforms
ISO/CD 18893
Mobile elevating work platforms Safety principles, inspection, maintenance and operation
TC 216
Footwear
ISO/CD 16718
Footwear Test methods for whole shoes Abrasion resistance
ISO/CD 16719
Footwear Test methods for whole shoes Flexing resistance
TC 218
Timber
ISO/CD 13061-1
Physical and mechanical properties of wood - Test methods for small clear specimen Part 1:
Determination of moisture content for physical and mechanical tests
ISO/CD 13061-2
Determination of density for physical and mechanical tests
ISO/CD 13061-3
Determination of ultimate strength in static bending
ISO/CD 13061-4
Determination of modulus of elasticity in static bending
ISO/CD 13061-6
Determination of ultimate tensile stress parallel to grain
ISO/CD 13061-7
Determination of ultimate tensile stress perpendicular to grain
TC 219
Floor coverings
ISO/CD 16905
Resilient floor coverings Specification for rubber floor covering Tile/Plank
ISO/CD 24334
Laminate floor coverings Determination of locking strength for mechanically assembled panels
JTC 1
Information technology
ISO/IEC CD
24771
Information technology Telecommunications and information exchange between systems MAC/PHY

standard for ad hoc wireless network to support QoS in an industrial work environment
ISO/IEC CD
29109-5
Information technology Conformance testing methodology for biometric data interchange formats
defined in ISO/IEC 19794 Part 5: Face image data
ISO/IEC CD
30106-1
BioAPI for object oriented programming languages Part 1: Architecture
ISO/IEC CD
30106-2
Information Technology Biometrics BioAPI for object oriented programming languages Part 2: Java
implementation
DIS circulated
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 8
ISO/DIS 16554

* Ships and marine technology Marine environment protection Measurement and
reporting of underwater sound radiated from merchant ships
TC 17
Steel
ISO/DIS 5950
Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing

qualities
2012-08-08
2012-08-28
(Revision of ISO 5950:2008)
TC 20
ISO/DIS 13832
Aircraft and space vehicles

* Aerospace Wire, aluminum alloy and copper clad aluminum conductors General
performance requirements
2012-08-29
ISO/DIS 16126
* Space systems Assessment of survivability of unmanned spacecraft against space

debris and meteoroid impacts to ensure successful post-mission disposal
2012-08-29
ISO/DIS 16404
Space systems Programme management Requirements management
2012-08-29
ISO/DIS 16698
Space environment (natural and artificial) Methods for estimation of future

geomagnetic activity
2012-08-29
TC 22
Road vehicles
ISO/DIS 6621-4
* Internal combustion engines Piston rings Part 4: General specifications
2012-08-29
(Revision of ISO 6621-4:2003)

ISO/DIS 6624-2
* Internal combustion engines Piston rings Part 2: Half keystone rings made of cast
iron
2012-08-30

ISO/DIS 6624-4
* Internal combustion engines Piston rings Part 4: Half keystone rings made of steel
2012-08-30

ISO/DIS 8820-9.2
* Road vehicles Fuse-links Part 9: Fuse-links with shortened tabs (Type K)
2012-05-29
ISO/DIS 14229-5
* Road vehicles Unified diagnostic services (UDS) Part 5: Unified diagnostic services
on Internet Protocol implementation (UDSonIP)
2012-08-29
ISO/DIS 14230-2
Road vehicles Diagnostic communication over K-Line (DoK-Line) Part 2: Data link
layer
2012-08-29

ISO/DIS 15830-1
* Road vehicles Design and performance specifications for the WorldSID 50th
percentile male side-impact dummy Part 1: Terminology and rationale
2012-08-17

ISO/DIS 15830-2
percentile male side-impact dummy Part 2: Mechanical subsystems
2012-08-17

ISO/DIS 15830-3
percentile male side-impact dummy Part 3: Electronic subsystems
2012-08-17

ISO/DIS 15830-4
percentile male side impact dummy Part 4: User's manual
2012-08-17
TC 28
ISO/DIS 4261
Petroleum products and lubricants

* Petroleum products Fuels (class F) Specifications of gas turbine fuels for industrial
and marine applications
2012-08-29

ISO/DIS 16384
TC 29
ISO/DIS 11529
* Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels

Dymethylether (DME) Measurement and calculation on boards ships
2012-08-02
Small tools
* Milling cutters Designation Shank-type and bore type milling cutters of solid or
tipped design or with indexable cutting edges
2012-08-10
(Revision of ISO 11529-1:2005, ISO 11529-2:2005)
TC 34
ISO/DIS 9622
Food products
* Milk and liquid milk products Guidelines for the application of mid-infrared
spectrometry
2012-08-13

ISO/DIS 17758
Instant dried milk Determination of the dispersibility and wettability
2012-08-13
TC 41
Pulleys and belts (including veebelts)
ISO/DIS 1081
Belt drives V-belts and V-ribbed belts, and corresponding grooved pulleys
Vocabulary
2012-08-28

ISO/DIS 11749
* Belt drive V-ribbed belts for the automotive industry Fatigue test
2012-08-06
(Revision of ISO 11749:1995, ISO 11749:1995/Cor 1:2003)
TC 42
Photography
ISO/DIS 22028-2
Photography and graphic technology Extended colour encodings for digital image
storage, manipulation and interchange Part 2: Reference output medium metric RGB
colour image encoding (ROMM RGB)
2012-08-27
(Revision of ISO/TS 22028-2:2006)
TC 43
Acoustics
ISO/DIS 362-1
Measurement of noise emitted by accelerating road vehicles Engineering method

Part 1: M and N categories
2012-08-14
(Revision of ISO 362-1:2007, ISO 362-1:2007/Cor 1:2009)
TC 44
ISO/DIS 15615.2
Welding and allied processes

* Gas welding equipment Acetylene manifold systems for welding, cutting and allied
processes Safety requirements in high-pressure devices
2012-05-16

ISO/DIS 14732.2
* Welding personnel Qualification testing of welding operators for fully mechanized

welding and weld setters for fully mechanized welding and automatic welding of
metallic materials
2012-05-23
TC 45
ISO/DIS 3385

* Flexible cellular polymeric materials Determination of fatigue by constant-load
pounding
2012-08-23

ISO/DIS 5892
* Rubber building gaskets Materials for preformed solid vulcanized structural gaskets
Specification
2012-08-17
TC 54
ISO/DIS 10115
Essential oils
* Essential oil of tarragon (Artemisia dracunculus L.), French type
2012-08-13
TC 58
ISO/DIS 11439.2
Gas cylinders
* Gas cylinders High pressure cylinders for the on-board storage of natural gas as a
fuel for automotive vehicles
2012-05-30
TC 61
Plastics
ISO/DIS 29221.2
* Plastics Determination of mode I plane-strain crack-arrest toughness
2012-05-16
ISO/DIS 30021
* Plastics Burning behaviour Intermediate-scale fire-resistance testing of fibrereinforced polymer composites
2012-08-13
ISO/DIS 11357-2
* Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass

transition temperature and glass transition step height
2012-08-02
ISO/DIS 12856
* Plastic railway sleepers (railroad ties)
2012-08-03
ISO/DIS 16525-1
* Adhesives Test methods for isotropically electrically conducting adhesives Part 1:

General test methods
2012-08-02
ISO/DIS 16525-2

Determination of electrical characteristics
2012-08-02
ISO/DIS 16525-3

Determination of heat transfer properties
2012-08-02
ISO/DIS 16525-4

Determination of shear strength and electrical resistance using rigid-to-rigid bonded
assemblies
2012-08-02
ISO/DIS 16525-5

Shear fatigue testing
2012-08-02
ISO/DIS 16525-6

Pendulum-type impact testing
2012-08-02
ISO/DIS 16525-7

Environmental test methods
2012-08-02
ISO/DIS 16525-8

Electrochemical-migration test methods
2012-08-02
TC 67
Materials, equipment and offshore structures for petroleum,

petrochemical and natural gas industries
ISO/DIS 15589-1
Petroleum, petrochemical and natural gas industries Cathodic protection of pipeline

systems Part 1: On-land pipelines
2012-08-29
TC 85
ISO/ASTM DIS
51261
Nuclear energy, nuclear technologies, and radiological protection

* Practice for calibration of routine dosimetry systems for radiation processing
2012-08-17
(Revision of ISO/ASTM 51261:2002)

ISO/ASTM DIS
51631
* Practice for use of calorimetric dosimetry systems for electron beam dose
measurements and dosimeter calibrations
2012-08-17

ISO/ASTM DIS
52116
* Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator
2012-08-17

ISO/DIS 16117
TC 87
* Nuclear criticality safety Estimation of the number of fissions of a postulated

criticality accident
2012-08-06
Cork
ISO/DIS 16420
* Cork Cork stoppers for still wines Mechanical and physical specifications
2012-08-08
ISO/DIS 17727
* Cork --Cork stoppers for still wine Sampling plan for the quality control of cork
stoppers
2012-08-16
TC 92
ISO/DIS 12468-2
Fire safety
* External fire exposure to roofs Part 2: Classification of roofs
2012-08-17
TC 94
ISO/DIS 17249
Personal safety -- Protective clothing and equipment

* Safety footwear with resistance to chain saw cutting
2012-08-30
(Revision of ISO 17249:2004, ISO 17249:2004/Amd 1:2007)

ISO/DIS 13994
* Clothing for protection against liquid chemicals Determination of the resistance of

protective clothing materials to penetration by liquids under pressure
2012-08-29
TC 106
ISO/DIS 29022
TC 119
ISO/DIS 13517
TC 121
ISO/DIS 10079-3
Dentistry
* Dentistry Adhesion Notched-edge shear bond strength test
2012-08-23
Powder metallurgy
* Metallic powders Determination of flowrate by means of a calibrated funnel
(Gustavsson flowmeter)
2012-08-02
Anaesthetic and respiratory equipment

* Medical suction equipment Part 3: Suction equipment powered from a vacuum or
positive pressure gas source
2012-08-02
TC 145
ISO/DIS 9186-1
Graphical symbols
* Graphical symbols Test methods Part 1: Method for testing comprehensibility
2012-08-22
TC 150
ISO
* Non-active surgical implants Joint replacement implants Specific requirements for
21536:2007/DAmd
knee-joint replacement implants Amendment 1
1
TC 163
2012-08-09
Thermal performance and energy use in the built environment
ISO
* Hygrothermal performance of building materials and products Determination of
12570:2000/DAmd
moisture content by drying at elevated temperature Amendment 1
1
TC 164
Mechanical testing of metals
ISO/DIS 14577-1
Metallic materials Instrumented indentation test for hardness and materials

parameters Part 1: Test method
2012-08-30
2012-08-30

ISO/DIS 14577-2

parameters Part 2: Verification and calibration of testing machines
2012-08-30

ISO/DIS 14577-3

parameters Part 3: Calibration of reference blocks
2012-08-30

ISO/DIS 12110-1
* Metallic materials Fatigue testing Variable amplitude fatigue testing Part 1:

General principles, test method and reporting requirements
2012-08-06
ISO/DIS 12110-2
* Metallic materials Fatigue testing Variable amplitude fatigue testing Part 2:

Cycle counting and related data reduction methods
2012-08-06
TC 165
ISO/DIS 16507
TC 171
Timber structures
* Timber structures Uniform, concentrated static and concentrated impact loads on
wood-based roof and floor panel assemblies Test methods
2012-08-13
Document management applications
ISO/DIS 19005-3.2 * Document management Electronic document file format for long-term preservation
Part 3: Use of ISO 32000-1 with support for embedded files (PDF/A-3)
2012-05-10
ISO/DIS 32000-2
2012-08-02
TC 188
ISO/DIS 7840
* Document management Portable document format Part 2: PDF 2.0
Small craft
* Small craft Fire-resistant fuel hoses
2012-08-23

ISO/DIS 8469
* Small craft Non-fire-resistant fuel hoses
2012-08-23

ISO
* Small craft Inboard diesel engines Engine-mounted fuel and electrical components
16147:2002/DAmd
Amendment 1
1
TC 198
ISO 134086:2005/DAmd 1
2012-08-16
Sterilization of health care products

* Aseptic processing of health care products Part 6: Isolator systems Amendment 1
TC 199
Safety of machinery
ISO/DGuide 78
Safety of machinery Rules for drafting and presentation of safety standards
2012-08-30
2012-07-06
(Revision of ISO Guide 78:2008)

ISO/DIS 13856-3
* Safety of machinery Pressure-sensitive protective devices Part 3: General

principles for the design and testing of pressure-sensitive bumpers, plates, wires and
similar devices
2012-08-16
TC 204
Intelligent transport systems
ISO/DIS 15638-2
* Intelligent transport systems Framework for collaborative Telematics Applications for

Regulated commercial freight Vehicles (TARV) Part 2: Common platform parameters
using CALM
2012-08-30
ISO/DIS 15638-3
* Intelligent transport systems Framework for cooperative telematics applications for

regulated commercial freight vehicles (TARV) Part 3: Requirements, 'Certification
authority' approval procedures, and enforcement provisions for the providers of
regulated services
2012-08-17
ISO/DIS 15638-5
* Intelligent transport systems Framework for collaborative Telematics Applications for

Regulated commercial freight Vehicles (TARV) Part 5: Generic vehicle information
2012-08-17
TC 211
ISO/DIS 19101-1
Geographic information/Geomatics
* Geographic information - Reference model Part 1: Fundamentals
2012-08-09
TC 213
ISO/DIS 16610-1
Dimensional and geometrical product specifications and verification

* Geometrical product specifications (GPS) Filtration Part 1: Overview and basic
concepts
2012-08-16

ISO/DIS 16610-20
* Geometrical product specifications (GPS) Filtration Part 20: Linear profile filters:
Basic concepts
2012-08-16

ISO/DIS 16610-22
Spline filters
2012-08-16

ISO/DIS 16610-29
Spline wavelets
2012-08-16

ISO/DIS 16610-40
* Geometrical product specifications (GPS) Filtration Part 40: Morphological profile

filters: Basic concepts
2012-08-16

ISO/DIS 16610-41

filters: Disk and horizontal line-segment filters
2012-08-16

ISO/DIS 16610-49
2012-08-16
filters: Scale space techniques

ISO/DIS 16610-71
* Geometrical product specifications (GPS) Filtration Part 71: Robust areal filters:
Gaussian regression filters
2012-08-30
ISO/DIS 16610-85
* Geometrical product specifications (GPS) Filtration Part 85: Areal morphological:

Segmentation
2012-06-30
JTC 1
ISO/IEC DIS 18180
Information technology Specification for the Extensible Configuration Checklist

Description Format (XCCDF) Version 1.2
2012-08-28
ISO/IEC
10646/DAmd 1
Information technology Universal Coded Character Set (UCS) Amendment 1:

Linear A, Palmyrene, Manichaean, Khojki, Khudawadi, Bassa Vah, Duployan, and other
characters
2012-08-27
ISO/IEC
14651:2011/DAmd
1
Information technology International string ordering and comparison Method for

comparing character strings and description of the common template tailorable
ordering Amendment 1
2012-08-03
ISO/IEC 95941:2008/DAmd 2
Information technology Open Systems Interconnection The Directory: Overview of

concepts, models and services Part 1: Amendment 2: Communications support
enhancements
2012-08-27
Information technology Open Systems Interconnection The Directory: Overview of

concepts, models and services Part 1: Amendment 3: IdM support
2012-08-27
Information technology Open Systems Interconnection The Directory: Models

Part 2: Amendment 2: Communication support enhancements
2012-08-27
Information technology Open Systems Interconnection The Directory: Models

Part 2: Amendment 3: IdM support
2012-08-27
Information technology Open Systems Interconnection The Directory: Abstract

service definition Part 3: Amendment 2: Communications support enhancements
2012-08-27
Information technology Open Systems Interconnection The Directory: Abstract

service definition Part 3: Amendment 3: IdM support
2012-08-27
Information technology Open Systems Interconnection The Directory: Procedures

for distributed operation Part 4: Amendment 2: Communications support
enhancements
2012-08-27
Information technology Open Systems Interconnection The Directory: Protocol

specifications Part 5: Amendment 2: Communications support enhancements
2012-08-27
Information technology Open Systems Interconnection The Directory: Selected

attribute types Part 6: Amendment 2: Communications support enhancements
2012-08-27

attribute types Part 6: Amendment 3: IdM support
2012-08-27

object classes Part 7: Amendment 2: Communications support enhancements
2012-08-27

object classes Part 7: Amendment 3: IdM support
2012-08-27
Information technology Open Systems Interconnection The Directory: Public-key

and attribute certificate frameworks Part 8: Amendment 2: Communications
support enhancements
2012-08-27
Information technology Open Systems Interconnection The Directory: Public-key

and attribute certificate frameworks Part 8: Amendment 3: IdM support
2012-08-27
Information technology Open Systems Interconnection The Directory: Replication

Part 9: Amendment 2: Communications support enhancements
2012-08-27
ISO/IEC DIS
25021.2
Systems and software engineering Systems and software Quality Requirements and
Evaluation (SQuaRE) Quality measure elements
2012-05-16
(Revision of ISO/IEC TR 25021:2007)
ISO/IEC 138181:2007/DAmd 9
Information technology Generic coding of moving pictures and associated audio

information: Systems Part 1: Amendment 9: Signalling of Transport profiles,
signaling MVC stereo view association and MIME type registration
2012-08-03
ISO/IEC DIS 2300010
Information technology Multimedia application format (MPEG-A) Part 10:

Surveillance application format
2012-08-03
(Revision of ISO/IEC 23000-10:2009, ISO/IEC 23000-10:2009/Amd 1:2010)

Information technology Keyboard layouts for text and office systems Part 2:
Alphanumeric section Amendment 1: Numeric keypad emulation
2012-08-27
ISO/IEC DIS 999510
Information technology Keyboard layouts for text and office systems Part 10:
Conventional symbols and methods to represent graphic characters not uniquely
recognizable by their glyph on keyboards and in documentation
2012-08-27
ISO/IEC 197944:2011/DAmd 1
Information technology Biometric data interchange formats Part 4: Finger image

data Amendment 1: Conformance testing methodology
2012-08-16
ISO/IEC DIS 1979414
Information technology Biometric data interchange formats Part 14: DNA data
2012-08-16
FDIS circulated
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date
shown
Vote terminates
TC 2
ISO/FDIS
898-5
Fasteners
*
Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set
screws and similar threaded fasteners with specified hardness classes Coarse thread and
fine pitch thread
2012-05-09

ISO/FDIS
15072
Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
2012-05-16

ISO/FDIS
7041
Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9
and 12
2012-05-03

ISO/FDIS
7720
Prevailing torque type all-metal hexagon nuts, style 2 Property class 9
2012-05-16
TC 4
ISO/FDIS
15241
Rolling bearings
*
Rolling bearings Symbols for quantities
2012-05-16

ISO/FDIS
Rolling bearings Radial bearings, retaining slots Dimensions and tolerances
2012-05-16
20515
TC 6
Paper, board and pulps
ISO/FDIS 536 *
Paper and board Determination of grammage
2012-06-23
TC 8
ISO/IEC/IEEE *
FDIS 80005-1
Cold ironing Part 1: High Voltage Shore Connection (HVSC) Systems General
requirements
2012-05-03
(Revision of IEC/PAS 60092-510:2009)

ISO/FDIS
11336-1
Large yachts Strength, weathertightness and watertightness of glazed openings Part

1: Design criteria, materials, framing and testing of independent glazed openings
2012-05-30
ISO/FDIS
11347
Ships and marine technology Large yachts Measurement and assessment of the visual
appearance of coatings
2012-05-06
TC 17
ISO/FDIS
630-3
Steel
*
Structural steels Part 3: Technical delivery conditions for fine-grain structural steels
2012-05-14

ISO/FDIS
630-4
Structural steels Part 4: Technical delivery conditions for high-yield-strength quenched

and tempered structural steel plates
2012-05-14
TC 21
ISO/FDIS
7240-5
Equipment for fire protection and fire fighting

*
Fire detection and alarm systems Part 5: Point-type heat detectors
2012-05-20
(Revision of ISO 7240-5:2003, ISO 7240-5:2003/Cor 1:2005)

ISO/FDIS
5923
Equipment for fire protection and fire fighting Fire extinguishing media Carbon dioxide
2012-05-30
TC 22
ISO/FDIS
26262-10
Road vehicles
*
TC 23
Road vehicles Functional safety Part 10: Guideline on ISO 26262
2012-05-10
Tractors and machinery for agriculture and forestry
ISO/FDIS
22369-3
Crop protection equipment Drift classification of spraying equipment Part 3: Potential

spray drift measurement for field crop sprayers by the use of a test bench
2012-05-16
ISO/FDIS
4254-12
Agricultural machinery Safety Part 12: Rotary disc and drum mowers and flail mowers
2012-05-23
ISO/FDIS
17101-1
Agricultural machinery Thrown-object test and acceptance criteria Part 1: Rotary

mowers
2012-05-16

ISO/FDIS
17101-2
Agricultural machinery Thrown-object test and acceptance criteria Part 2: Flail mowers
2012-05-16
TC 29
ISO/FDIS
9766
Small tools
*
Drills with indexable inserts Cylindrical shanks with a parallel flat

2012-05-17
TC 34
ISO/FDIS
6498
Food products
*
Animal feeding stuffs Guidelines for sample preparation
2012-05-02
TC 35
ISO/FDIS
9117-6

*
Paints and varnishes Drying tests Part 6: Print-free test
2012-05-30
TC 37
ISO/FDIS
26162.2
Systems to manage terminology, knowledge and content Design, implementation and

maintenance of terminology management systems
2012-05-31
ISO/FDIS
24612
Language resource management Linguistic annotation framework (LAF)
2012-05-29
TC 38
ISO/FDIS
12027
Textiles
*
TC 42
ISO/FDIS
18926
Textiles Cotton-fibre stickiness Detection of sugar by colour reaction
2012-05-23
Photography
*
Imaging materials Information stored on magneto-optical (MO) discs Method for

estimating the life expectancy based on the effects of temperature and relative humidity
2012-05-17
TC 44
ISO/FDIS
15614-13

*
Specification and qualification of welding procedures for metallic materials Welding

procedure test Part 13: Upset (resistance butt) and flash welding
2012-05-30
TC 45
ISO/FDIS
21461

*
Rubber Determination of the aromaticity of oil in vulcanized rubber compounds
2012-05-14
TC 46
ISO/FDIS
13008
Information and documentation

*
TC 59
ISO/FDIS
15686-2
Information and documentation Digital records conversion and migration process
2012-05-07
Buildings and civil engineering works

*
Buildings and constructed assets Service life planning Part 2: Service life prediction
procedures
2012-05-13
TC 61
ISO/FDIS
1183-1
Plastics
*
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion
method, liquid pyknometer method and titration method
2012-05-02

ISO/FDIS
10210
Plastics Methods for the preparation of samples for biodegradation testing of plastic
materials
2012-05-14
ISO/FDIS
17088
Specifications for compostable plastics
2012-05-17

ISO/FDIS
Plastics Unplasticized poly(vinyl chloride) sheets Types, dimensions and
2012-05-23
11833-1
characteristics Part 1: Sheets of thickness not less than 1 mm

TC 67
ISO/FDIS
19905-1.2
Materials, equipment and offshore structures for petroleum,

petrochemical and natural gas industries
*
TC 69
ISO/FDIS
11843-7
2012-05-16

*
TC 83
ISO/FDIS
9465
Petroleum and natural gas industries Site-specific assessment of mobile offshore units
Part 1: Jack-ups
Capability of detection Part 7: Methodology based on stochastic properties of

instrumental noise
2012-05-24
Sports and recreational equipment

*
Alpine ski-bindings Lateral release under impact loading Test method
2012-05-29
TC 85
ISO/FDIS
11665-1
Measurement of radioactivity in the environment Air: radon-222 Part 1: Origins of

radon and its short-lived decay products and associated measurement methods
2012-05-23
ISO/FDIS
11665-2
Measurement of radioactivity in the environment Air: radon-222 Part 2: Integrated

measurement method for determining average potential alpha energy concentration of its
short-lived decay products
2012-05-23
ISO/FDIS
11665-3
Measurement of radioactivity in the environment Air: radon-222 Part 3: Spot

measurement method of the potential alpha energy concentration of its short-lived decay
products
2012-05-23
ISO/FDIS
11665-4
Measurement of radioactivity in the environment Air: radon-222 Part 4: Integrated

measurement method for determining average activity concentration using passive
sampling and delayed analysis
2012-05-23
ISO/FDIS
11665-5
Measurement of radioactivity in the environment Air: radon-222 Part 5: Continuous

measurement method of the activity concentration
2012-05-23
ISO/FDIS
11665-6
Measurement of radioactivity in the environment Air: radon-222 Part 6: Spot

measurement method of the activity concentration
2012-05-23
ISO/FDIS
11665-7
Measurement of radioactivity in the environment Air: radon-222 Part 7: Accumulation

method for estimating surface exhalation rate
2012-05-23
TC 106
ISO/FDIS
6876
Dentistry
*
Dentistry Root canal sealing materials
2012-05-16
TC 111
ISO/FDIS
3076
Round steel link chains, chain slings, components and accessories

*
Round steel short link chains for general lifting purposes Medium tolerance sling chains
for chain slings Grade 8
2012-05-12
TC 119
ISO/FDIS
2739
Powder metallurgy
*
Sintered metal bushings Determination of radial crushing strength
2012-05-16

ISO/FDIS
22068
TC 135
ISO/FDIS
Sintered-metal injection-moulded materials Specifications
2012-05-24
Non-destructive testing
*
Non-destructive testing Qualification and certification of NDT personnel
2012-05-02
9712
TC 145
Graphical symbols
ISO
7010:2011/F
DAmd 85
Graphical symbols Safety colours and safety signs Registered safety signs
Amendment 85: Safety sign E014: Child seat presence and orientation detection system
(CPOD)
2012-05-28
ISO
7010:2011/F
DAmd 86
Amendment 86: Safety sign E015: Drinking water
2012-05-28
ISO
7010:2011/F
DAmd 87
Amendment 87: Safety sign E020: Emergency stop button
2012-05-28
ISO
7010:2011/F
DAmd 89
Amendment 89: Safety sign E022: Door opens by pushing on the left-hand side
2012-05-28
ISO
7010:2011/F
DAmd 90
Amendment 90: Safety sign E023: Door opens by pushing on the right-hand side
2012-05-28
ISO
7010:2011/F
DAmd 91
Amendment 91: Safety sign M027: Check guard
2012-05-28
ISO
7010:2011/F
DAmd 98
Amendment 98: Safety sign P035: Do not wear metal-studded footwear
2012-05-28
ISO
7010:2011/F
DAmd 99
Amendment 99: Safety sign P036: No children allowed
2012-05-28
ISO
7010:2011/F
DAmd 102
Amendment 102: Safety sign W032: Warning; Rapid movement of workpiece in press brake
2012-05-28
ISO
7010:2011/F
DAmd 106
Amendment 106: Safety sign W036: Warning; Fragile roof
2012-05-28
ISO
7010:2011/F
DAmd 108
Amendment 108: Safety sign W038: Warning; Sudden loud noise
2012-05-28
TC 146
ISO/FDIS
15202-1
Air quality
*
Workplace air Determination of metals and metalloids in airborne particulate matter by

inductively coupled plasma atomic emission spectrometry Part 1: Sampling
2012-05-17

ISO/FDIS
12219-2
Interior air of road vehicles Part 2: Screening method for the determination of the
emissions of volatile organic compounds from vehicle interior parts and materials Bag
method
2012-05-27
ISO/FDIS
12219-3
Interior air of road vehicles Part 3: Screening method for the determination of the
emissions of volatile organic compounds from vehicle interior parts and materials Microscale chamber method
2012-05-27
ISO/FDIS
16000-19
Indoor air Part 19: Sampling strategy for moulds
2012-05-06
TC 147
ISO/FDIS
11352
Water quality
*
TC 150
ISO/FDIS
Water quality Estimation of measurement uncertainty based on validation and quality

control data
2012-05-29

*
Orthopaedic drilling instruments Part 1: Drill bits, taps and countersink cutters
2012-05-17
9714-1
TC 156
ISO/FDIS
17752
Corrosion of metals and alloys

*
Corrosion of metals and alloys Procedures to determine and estimate runoff rates of
metals from materials as a result of atmospheric corrosion
TC 159
Ergonomics
ISO 9241*
410:2008/FD
Amd 1
Ergonomics of human-system interaction Part 410: Design criteria for physical input
devices Amendment 1
TC 172
ISO/FDIS
8578
Microscopes Marking of objectives and eyepieces
2012-05-21
2012-05-23
2012-05-17

ISO/FDIS
9345-1
Microscopes Imaging distances related to mechanical reference planes Part 1: Tube

length 160 mm
2012-05-24
TC 173
ISO/FDIS
10865-1
Assistive products for persons with disability

*
Wheelchair containment and occupant retention systems for accessible transport vehicles
designed for use by both sitting and standing passengers Part 1: Systems for rearwardfacing wheelchair-seated passengers
TC 181
Safety of toys
ISO 8124*
4:2010/FDAm
d1
Safety of toys Part 4: Swings, slides and similar activity toys for indoor and outdoor
family domestic use Amendment 1: Inflatable activity toys
TC 184
Automation systems and integration
ISO/FDIS
8000-2
Data quality Part 2: Vocabulary
2012-05-21
2012-05-28
2012-05-28
TC 190
Soil quality
ISO/FDIS
11504
Soil quality Assessment of impact from soil contaminated with petroleum hydrocarbons
2012-05-08
ISO/FDIS
12782-1
Soil quality Parameters for geochemical modelling of leaching and speciation of

constituents in soils and materials Part 1: Extraction of amorphous iron oxides and
hydroxides with ascorbic acid
2012-05-16
ISO/FDIS
12782-2

constituents in soils and materials Part 2: Extraction of crystalline iron oxides and
hydroxides with dithionite
2012-05-16
ISO/FDIS
12782-3

constituents in soils and materials Part 3: Extraction of aluminium oxides and hydroxides
with ammonium oxalate/oxalic acid
2012-05-16
ISO/FDIS
12782-4

constituents in soils and materials Part 4: Extraction of humic substances from solid
samples
2012-05-16
ISO/FDIS
12782-5

constituents in soils and materials Part 5: Extraction of humic substances from aqueous
samples
2012-05-16
TC 195
ISO
Building construction machinery and equipment

*
Road construction and maintenance equipment Bituminous binder spreaders/sprayers
2012-05-03
15643:2002/
FDAmd 1
ISO/FDIS
19432
Terminology and commercial specifications Amendment 1

*
Building construction machinery and equipment Portable, hand-held, internal combustion

engine driven cut-off machines Safety requirements
2012-05-23
TC 205
ISO/FDIS
16484-5
Building environment design

*
Building automation and control systems Part 5: Data communication protocol
2012-05-30
TC 206
ISO/FDIS
23145-2
Fine ceramics
*
TC 211
ISO/FDIS
19144-2
2012-05-10
*
TC 225
ISO/FDIS
20252
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of bulk

density of ceramic powders Part 2: Untapped density
Geographic information - Classification systems Part 2: Land Cover Meta Language

(LCML)
2012-05-31
Market, opinion and social research

*
Market, opinion and social research Vocabulary and service requirements
2012-05-17
TC 244
ISO/FDIS
13577-1
Industrial furnaces and associated processing equipment

*
TC 250
ISO/FDIS
20121
2012-05-16
Project committee: Sustainability in event management

*
CASCO
ISO/IEC FDIS
17024
Industrial furnaces and associated processing equipment Safety Part 1: General

requirements
Event sustainability management systems Requirements with guidance for use
2012-05-31
Committee on conformity assessment

*
Conformity assessment General requirements for bodies operating certification of

persons
2012-05-02
(Revision of ISO/IEC 17024:2003)
JTC 1
ISO/IEC FDIS
29180
Information technology Telecommunications and information exchange between systems

Security framework for ubiquitous sensor networks
2012-05-09
ISO/IEC FDIS
25041
Systems and software engineering Systems and software Quality Requirements and
Evaluation (SQuaRE) Evaluation guide for developers, acquirers and independent
evaluators
2012-05-02
(Revision of ISO/IEC 14598-3:2000, ISO/IEC 14598-4:1999, ISO/IEC 14598-5:1998)

ISO/IEC/IEEE *
FDIS 31320-1
Information technology Modeling Languages Part 1: Syntax and Semantics for IDEF0
2012-08-06
ISO/IEC/IEEE *
FDIS 31320-2
Information technology Modeling Languages Part 2: Syntax and Semantics for

IDEF1X97 (IDEFobject)
2012-08-06
ISO/IEC FDIS
11694-1
Identification cards Optical memory cards Linear recording method Part 1: Physical
characteristics
2012-05-10
(Revision of ISO/IEC 11694-1:2005)

ISO/IEC FDIS
11694-2
Identification cards Optical memory cards Linear recording method Part 2:

Dimensions and location of the accessible optical area
2012-05-10
ISO/IEC
*
144433:2011/FDAm
d2
Identification cards Contactless integrated circuit cards Proximity cards Part 3:

Initialization and anticollision Amendment 2: Bit rates of fc/8, fc/4 and fc/2, frame size
from 512 bytes to 4 096 bytes and minimum TR0
2012-05-10
ISO/IEC FDIS
13818-2
Information technology Generic coding of moving pictures and associated audio

information: Video Part 2:
2012-05-08

ISO/IEC FDIS
15444-14
Information technology JPEG 2000 image coding system Part 14: XML structural
representation and reference
2012-05-29
ISO/IEC FDIS
24730-2
Information technology Real-time locating systems (RTLS) Part 2: Direct Sequence

Spread Spectrum (DSSS) 2,4 GHz air interface protocol
2012-05-20
ISO/IEC FDIS
24730-21
Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with a single
spread code and employing a DBPSK data encoding and BPSK spreading scheme
2012-05-20
(Revision of ISO/IEC 24730-2:2006, ISO/IEC FDIS 24730-2)

ISO/IEC FDIS
24730-22
Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with
multiple spread codes and employing a QPSK data encoding and Walsh offset QPSK
(WOQPSK) spreading scheme
2012-05-20
(Revision of ISO/IEC 24730-2:2006, ISO/IEC FDIS 24730-2)

ISO/IEC FDIS
29177
Information technology Automatic identification and data capture technique Identifier

resolution protocol for multimedia information access triggered by tag-based identification
2012-05-29
Standards published
New International Standards published between 01 March and 31 March 2012
** French version of standard previously published in English only
Price
group
IIW
International Institute of Welding
ISO 3690:2012
Welding and allied processes Determination of hydrogen content in arc weld metal
TC 2
Fasteners
ISO 898-2:2012
Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with
specified property classes Coarse thread and fine pitch thread
Technical aspects of nut design
ISO/TR
16224:2012
TC 4
Rolling bearings
ISO 12297:2012
Rolling bearings Steel cylindrical rollers Dimensions and tolerances
TC 8
ISO 14859:2012

*
TC 17
Ships and marine technology - Sound reception systems
Steel
ISO 15177:2012
Hot-rolled twin-roll cast carbon steel sheet of commercial quality
ISO 15179:2012
Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
ISO 15208:2012
Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
ISO 15211:2012
Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength
steel
TC 20
ISO 11892:2012
Space systems Subsystems/units to spacecraft interface control document
ISO 26869:2012
Space systems Small-auxiliary-spacecraft (SASC)-to- launch- vehicle interface control

document
TC 22
Road vehicles
ISO 114461:2012
Road vehicles Connectors for the electrical connection of towing and towed vehicles Part 1:
13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water
fords
ISO 139482:2012
Diesel engines Fuel injection pumps and fuel injector low-pressure connections Part 2: Nonthreaded (push-on) connections
ISO 10597:2012
Road vehicles Flat attachment fixing nuts for commercial vehicles Test methods
ISO 155011:2012
Road vehicles Compressed natural gas (CNG) fuel systems Part 1: Safety requirements
TC 23
ISO
11839:2010/Cor
1:2012
Machinery for forestry Glazing and panel materials used in operator enclosures for protection
against thrown sawteeth Test method and performance criteria Technical Corrigendum 1
TC 28
ISO 13032:2012
Petroleum products Determination of low concentration of sulfur in automotive fuels

Energy-dispersive X-ray fluorescence spectrometric method
TC 30
Measurement of fluid flow in closed conduits
ISO/TR
11583:2012
Measurement of wet gas flow by means of pressure differential devices inserted in circular crosssection conduits
free
TC 34
Food products
ISO 14470:2011
Food irradiation Requirements for the development, validation and routine control of the
process of irradiation using ionizing radiation for the treatment of food
ISO/TS 220023:2011
Prerequisite programmes on food safety Part 3: Farming
TC 38
Textiles
ISO 3758:2012
Textiles Care labelling code using symbols
TC 39
Machine tools
ISO
23125:2010/Amd
1:2012
Machine tools Safety Turning machines Amendment 1
TC 41
Pulleys and belts (including veebelts)
ISO 12046:2012
Synchronous belt drives Automotive belts Determination of physical properties
TC 42
Photography
XZ
ISO 18929:2012
Imaging materials Wet-processed silver-gelatin type black-and-white photographic reflection

prints Specifications for dark storage
TC 43
Acoustics
ISO 8253-3:2012
Acoustics Audiometric test methods Part 3: Speech audiometry
ISO 26101:2012
Acoustics Test methods for the qualification of free-field environments
ISO 3745:2012
Acoustics Determination of sound power levels and sound energy levels of noise sources
using sound pressure Precision methods for anechoic rooms and hemi-anechoic rooms
TC 45
ISO 18852:2012
Rubber compounding ingredients Determination of multipoint nitrogen surface area (NSA) and
statistical thickness surface area (STSA)
TC 46
ISO 27729:2012
Information and documentation International standard name identifier (ISNI)
ISO/TR
13028:2010
Information and documentation - Implementation guidelines for digitization of records
TC 58
Gas cylinders
ISO 111141:2012
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1:
Metallic materials
TC 59
ISO 21542:2011
Building construction Accessibility and usability of the built environment
TC 61
Plastics
ISO 672111:2012
XC
Plastics Determination of dynamic mechanical properties Part 11: Glass transition

temperature
ISO 7214:2012
Cellular plastics Polyethylene Methods of test
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical

and natural gas industries
ISO 218091:2011
Petroleum and natural gas industries External coatings for buried or submerged pipelines
used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
ISO 13680:2010
Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as
casing, tubing and coupling stock Technical delivery conditions
ISO 199016:2009
Petroleum and natural gas industries Specific requirements for offshore structures Part 6:
Marine operations
TC 68
Financial services
ISO 16609:2012
TC 76
ISO 110406:2012
Financial services Requirements for message authentication using symmetric techniques
XC
Transfusion, infusion and injection, and blood processing equipment for

medical and pharmaceutical use
*
Prefilled syringes Part 6: Plastic barrels for injectables
TC 83
ISO
11088:2006/Amd
1:2012
Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system

Amendment 1
TC 84
Devices for administration of medicinal products and intravascular

catheters
ISO 116081:2012
Needle-based injection systems for medical use Requirements and test methods Part 1:
Needle-based injection systems
ISO 116082:2012
Needle-based injection systems for medical use Requirements and test methods Part 2:
Needles
XZ
TC 94
ISO 228462:2012
Personal safety -- Protective clothing and equipment

*
Personal equipment for protection against falls Rope access systems Part 2: Code of
practice
ISO 174911:2012
Protective clothing Test methods for clothing providing protection against chemicals Part 1:
Determination of resistance to outward leakage of gases (internal pressure test)
TC 102
Iron ore and direct reduced iron
ISO 9683-2:2009 *
Iron ores Determination of vanadium Part 2: Flame atomic absorption spectrometric

methods
TC 106
Dentistry
ISO 216721:2012
Dentistry Periodontal probes Part 1: General requirements
TC 108
Mechanical vibration, shock and condition monitoring
ISO 148394:2012
Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings
Part 4: Technical guidelines
ISO 2194013:2012
Mechanical vibration Rotor balancing Part 13: Criteria and safeguards for the in-situ
balancing of medium and large rotors
ISO 2194032:2012
Mechanical vibration Rotor balancing Part 32: Shaft and fitment key convention
TC 119
Powder metallurgy
ISO 3907:2009
TC 130
ISO 126478:2012
Hardmetals Determination of total carbon Gravimetric method
Graphic technology
*
Graphic technology Process control for the production of half-tone colour separations, proof
and production prints Part 8: Validation print processes working directly from digital data
TC 131
Fluid power systems
ISO 16431:2012
Hydraulic fluid power System clean-up procedures and verification of cleanliness of

assembled systems
TC 135
Non-destructive testing
ISO 16810:2012
Non-destructive testing Ultrasonic testing General principles
ISO 16811:2012
Non-destructive testing Ultrasonic testing Sensitivity and range setting
ISO 16823:2012
Non-destructive testing Ultrasonic testing Transmission technique
ISO 16826:2012
Non-destructive testing Ultrasonic testing Examination for discontinuities perpendicular to

the surface
ISO 16827:2012
Non-destructive testing Ultrasonic testing Characterization and sizing of discontinuities
ISO 16828:2012
Non-destructive testing Ultrasonic testing Time-of-flight diffraction technique as a method

for detection and sizing of discontinuities
ISO 16831:2012
Non-destructive testing Ultrasonic testing Characterization and verification of ultrasonic

thickness measuring equipment
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 112963:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage
networks Part 3: Lining with close-fit pipes
ISO 112964:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage
networks Part 4: Lining with cured-in-place pipes
ISO
8533:2003/Amd
1:2012
Plastics piping systems for pressure and non-pressure drainage and sewerage Glassreinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
Test methods to prove the design of cemented or wrapped joints Amendment 1
XZ
ISO
*
10467:2004/Amd
1:2012
Plastics piping systems for pressure and non-pressure drainage and sewerage Glassreinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
Amendment 1
XZ
TC 146
Air quality
ISO 160008:2007
Indoor air Part 8: Determination of local mean ages of air in buildings for characterizing
ventilation conditions
ISO 1600028:2012
Indoor air Part 28: Determination of odour emissions from building products using test
chambers
TC 147
Water quality
ISO 12010:2012
Water quality Determination of short-chain polychlorinated alkanes (SCCPs) in water

Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical
ionization (NCI)
ISO 14371:2012
Water quality Determination of fresh water sediment toxicity to Heterocypris incongruens

(Crustacea, Ostracoda)
TC 150
ISO 5832-2:1999
Implants for surgery Metallic materials Part 2: Unalloyed titanium
TC 156
ISO 8565:2011
Metals and alloys Atmospheric corrosion testing General requirements
ISO 21608:2012
Corrosion of metals and alloys Test method for isothermal-exposure oxidation testing under
high-temperature corrosion conditions for metallic materials
TC 157
Non-systemic contraceptives and STI barrier prophylactics
ISO 7439:2011
Copper-bearing contraceptive intrauterine devices Requirements and tests
TC 159
Ergonomics
ISO/TR 9241331:2012
Ergonomics of human-system interaction Part 331: Optical characteristics of autostereoscopic

displays
ISO 28802:2012
Ergonomics of the physical environment Assessment of environments by means of an

environmental survey involving physical measurements of the environment and subjective
responses of people
ISO 28803:2012
Ergonomics of the physical environment Application of International Standards to people with

special requirements
TC 163
ISO 13791:2012
Thermal performance of buildings Calculation of internal temperatures of a room in summer

without mechanical cooling General criteria and validation procedures
ISO 13792:2012
Thermal performance of buildings Calculation of internal temperatures of a room in summer

without mechanical cooling Simplified methods
ISO
18292:2011/Cor
1:2012
Energy performance of fenestration systems for residential buildings Calculation procedure

Technical Corrigendum 1
TC 164
ISO 262032:2011
free

Metallic materials Tensile testing at high strain rates Part 2: Servo-hydraulic and other test
systems
ISO 7800:2012
Metallic materials Wire Simple torsion test
TC 172
ISO 252971:2012
Optics and photonics Electronic exchange of optical data Part 1: NODIF information model
ISO 12870:2012
Ophthalmic optics Spectacle frames Requirements and test methods
ISO 19980:2012
Ophthalmic instruments Corneal topographers
TC 173
ISO 23599:2012
TC 181
ISO 81241:2009/Amd
2:2012
Safety of toys Part 1: Safety aspects related to mechanical and physical properties
Amendment 2: Magnets
XZ
Ceramic tile
*
TC 194
ISO 13022:2012
Safety of toys
TC 189
ISO 13006:2012
Assistive products for blind and vision-impaired persons Tactile walking surface indicators
Ceramic tiles Definitions, classification, characteristics and marking
Biological evaluation of medical devices

*
Medical products containing viable human cells Application of risk management and
requirements for processing practices
TC 198
Sterilization of health care products
ISO 111372:2012
Sterilization of health care products Radiation Part 2: Establishing the sterilization dose
TC 201
Surface chemical analysis
ISO 16242:2011
Surface chemical analysis Recording and reporting data in Auger electron spectroscopy (AES)
ISO 16243:2011
Surface chemical analysis Recording and reporting data in X-ray photoelectron spectroscopy
(XPS)
TC 202
Microbeam analysis
ISO 11938:2012
Microbeam analysis Electron probe microanalysis Methods for elemental-mapping analysis

using wavelength-dispersive spectroscopy
TC 204
Intelligent transport systems
ISO 21216:2012
Intelligent transport systems Communication access for land mobiles (CALM) Millimetre
wave air interface
TC 207
ISO/TS
14033:2012
Environmental management Quantitative environmental information Guidelines and

examples
TC 210
Quality management and corresponding general aspects for medical

devices
ISO/TS 192182:2012
Medical devices Hierarchical coding structure for adverse events Part 2: Evaluation codes
TC 211
ISO 191112:2009
Geographic information Spatial referencing by coordinates Part 2: Extension for parametric

values
TC 213
ISO 251782:2012
Geometrical product specifications (GPS) Surface texture: Areal Part 2: Terms, definitions
and surface texture parameters
TC 215
Health informatics
ISO 136061:2008
Health informatics Electronic health record communication Part 1: Reference model
Health informatics Personal health records Definition, scope and context
ISO/TR
14292:2012
TC 217
Cosmetics
ISO 11930:2012
Cosmetics Microbiology Evaluation of the antimicrobial protection of a cosmetic product
TC 219
Floor coverings
ISO 10361:2012
Textile floor coverings Production of changes in appearance by means of Vettermann drum

and hexapod tumbler tester
TC 229
Nanotechnologies
ISO/TS
12805:2011
Nanotechnologies Materials specifications Guidance on specifying nano-objects
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO 170761:2012
Leather Determination of abrasion resistance Part 1: Taber method
ISO 260821:2012
Leather Physical and mechanical test methods for the determination of soiling Part 1:
Rubbing (Martindale) method
CASCO
ISO/IEC TS
17022:2012
JTC 1
Conformity assessment Requirements and recommendations for content of a third-party audit

report on management systems
ISO/IEC/IEEE
26511:2011
Systems and software engineering Requirements for managers of user documentation
ISO/IEC/IEEE
26515:2011
Systems and software engineering Developing user documentation in an agile environment
ISO/IEC 144432:2010/Amd
3:2012
Identification cards Contactless integrated circuit cards Proximity cards Part 2: Radio
frequency power and signal interface Amendment 3: Bits rates of fc/8, fc/4 and fc/2
XZ
ISO/IEC 144434:2008/Amd
1:2012
Identification cards Contactless integrated circuit cards Proximity cards Part 4:

Transmission protocol Amendment 1: Exchange of additional parameters
XZ
ISO/IEC 14543-3- *
10:2012
Information technology Home Electronic Systems (HES) Part 3-10: Wireless Short-Packet
(WSP) protocol optimized for energy harvesting Architecture and lower layer protocols
ISO/IEC 97982:2008/Cor
2:2012
Information technology Security techniques Entity authentication Part 2: Mechanisms

using symmetric encipherment algorithms Technical Corrigendum 2
free
ISO/IEC 97983:1998/Cor
2:2012
Information technology Security techniques Entity authentication Part 3: Mechanisms

using digital signature techniques Technical Corrigendum 2
free
ISO/IEC
27010:2012
Information technology Security techniques Information security management for intersector and inter-organizational communications
ISO/IEC TR
29149:2012
Information technology Security techniques Best practices for the provision and use of
time-stamping services
ISO/IEC 138184:2004/Cor
3:2012
Information technology Generic coding of moving pictures and associated audio information
Part 4: Conformance testing Technical Corrigendum 3
ISO/IEC 210002:2005/Amd
1:2012
Information technology Multimedia framework (MPEG-21) Part 2: Digital Item Declaration

Amendment 1: Presentation of digital item
XZ
ISO/IEC 210004:2006/Amd
2:2012
Information technology Multimedia framework (MPEG-21) Part 4: Intellectual Property

Management and Protection Components Amendment 2: Protection of presentation element
XZ
ISO/IEC 210004:2006/Cor
1:2012
Information technology Multimedia framework (MPEG-21) Part 4: Intellectual Property

Management and Protection Components Technical Corrigendum 1
free
ISO/IEC 230009:2008/Amd
1:2010/Cor
2:2012
Information technology Multimedia application format (MPEG-A) Part 9: Digital Multimedia

Broadcasting application format Amendment 1: Conformance and reference software
free
free
ISO/IEC 230033:2012
Information technology MPEG audio technologies Part 3: Unified speech and audio coding
XC
ISO/IEC 291992:2012
Information technology JPEG XR image coding system Part 2: Image coding specification
XC
ISO/IEC 291995:2012
Information technology JPEG XR image coding system Part 5: Reference software
ISO/IEC 291671:2012
Information technology Automatic identification and data capture techniques Part 1: Air
interface for security services and file management for RFID architecture
ISO/IEC
29175:2012
Information technology Mobile item identification and management User data for Mobile
AIDC services
ISO/IEC 159448:2012
Information technology Business Operational View Part 8: Identification of privacy

protection requirements as external constraints on business transactions
XC
ISO/IEC
*
26300:2006/Amd
1:2012
Information technology Open Document Format for Office Applications (OpenDocument) v1.0
Amendment 1: Open Document Format for Office Applications (OpenDocument) v1.1
XA
ISO/IEC 197942:2011/Cor
1:2012
Information technology Biometric data interchange formats Part 2: Finger minutiae data
free
ISO/IEC 197944:2011/Cor
1:2012
Information technology Biometric data interchange formats Part 4: Finger image data
free
ISO/IEC 197946:2011/Cor
1:2012
Information technology Biometric data interchange formats Part 6: Iris image data
free
ISO/IEC 197948:2011/Cor
1:2012
Information technology Biometric data interchange formats Part 8: Finger pattern skeletal
data Technical Corrigendum 1
free
Standards confirmed
The following International Standards are confimred for a five year period:
TC 17
Steel
ISO 18286:2008
ISO 9329-1:1989
(reconfirmed)
ISO 9329-2:1997
(reconfirmed)
ISO 9329-3:1997
(reconfirmed)
ISO 9329-4:1997
(reconfirmed)
ISO 9330-2:1997
(reconfirmed)
ISO 9330-3:1997
(reconfirmed)
ISO 9330-6:1997
(reconfirmed)
TC 20
ISO 493:1975
(reconfirmed)
ISO 5066-1:1986
(reconfirmed)
ISO 5066-2:1986
(reconfirmed)
TC 22
Road vehicles
ISO 12364:2001
(reconfirmed)
TC 23
ISO 11786:1995
(reconfirmed)
TC 31
Tyres, rims and valves
ISO 3877-3:1978
(reconfirmed)
ISO 3877-4:1984
(reconfirmed)
ISO 4223-2:1991
(reconfirmed)
ISO 13328:2000
(reconfirmed)
TC 34
Food products
ISO 711:1985
(reconfirmed)
ISO 7700-1:2008
ISO 1736:2008
ISO 1737:2008
ISO 1854:2008
ISO 2450:2008
ISO 7208:2008
ISO 7328:2008
ISO 8260:2008
ISO 8381:2008
ISO 8588:1987
(reconfirmed)
ISO 10399:2004
(reconfirmed)
TC 37
ISO 22128:2008
TC 39
Machine tools
ISO 10791-9:2001
(reconfirmed)
ISO 8525:2008
TC 46
ISO 832:1994
(reconfirmed)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and

natural gas industries
ISO 11961:2008
TC 69
ISO 11843-5:2008
TC 92
Fire safety
ISO 5658-4:2001
(reconfirmed)
TC 102
Iron ore and direct reduced iron
ISO 3852:2007
ISO 4698:2007
ISO 4700:2007
ISO 15967:2007
TC 105
Steel wire ropes
ISO 3108:1974
(reconfirmed)
ISO 3189-1:1985
(reconfirmed)
ISO 3189-2:1985
(reconfirmed)
ISO 3189-3:1985
(reconfirmed)
ISO 4101:1983
(reconfirmed)
ISO 4346:1977
(reconfirmed)
ISO 7531:1987
(reconfirmed)
ISO 8792:1986
(reconfirmed)
ISO 8793:1986
(reconfirmed)
ISO 8794:1986
(reconfirmed)
ISO 9975:1990
(reconfirmed)
TC 106
Dentistry
ISO 6360-5:2007
ISO 6360-7:2006
ISO 15098-2:2000
(reconfirmed)
ISO 15098-3:2000
(reconfirmed)
ISO
21671:2006/Amd
1:2011
ISO 8282:1994
(reconfirmed)
ISO 10650-2:2007
ISO/TS 225951:2006
ISO/TS 225952:2008
TC 107
Metallic and other inorganic coatings
ISO 2080:2008
TC 121
ISO 81060-1:2007
ISO 9170-1:2008
ISO 9170-2:2008
ISO 10524-4:2008
ISO 15002:2008
TC 131
Fluid power systems
ISO 5599-1:2001
(reconfirmed)
ISO 5599-2:2001
(reconfirmed)
TC 147
Water quality
ISO 5667-17:2008
TC 163
ISO 29465:2008
ISO 29466:2008
ISO 29468:2008
ISO 29766:2008
ISO 29768:2008
ISO 29770:2008
ISO 9076-2:2008
TC 171
ISO 23868:2008
TC 172
ISO 14729:2001
(reconfirmed)
ISO 24157:2008
TC 201
ISO 23830:2008
TC 206
Fine ceramics
ISO 14703:2008
ISO 26424:2008
TC 219
Floor coverings
ISO 1763:1986
(reconfirmed)
ISO 1765:1986
(reconfirmed)
ISO 2549:1972
(reconfirmed)
ISO 3415:1986
(reconfirmed)
ISO 3416:1986
(reconfirmed)
ISO 5086:1977
(reconfirmed)
ISO 11378-2:2001
(reconfirmed)
TC 221
Geosynthetics
ISO 25619-1:2008
ISO 25619-2:2008
JTC 1
ISO/IEC 1449621:2006
ISO/IEC 230021:2006
Standards withdrawn
TC 2
Fasteners
ISO 898-6:1994
(replaced by ISO 898-2:2012)
TC 22
Road vehicles
ISO/TS 16553:2006
(replaced by )
TC 34
Food products
ISO 3594:1976
(replaced by )
ISO 5542:1984
(replaced by )
ISO/TS 6090:2004
(replaced by )
ISO 6735:1985
(replaced by )
TC 87
Cork
ISO 2510:1989
(replaced by )
ISO 9392:1989
(replaced by )
TC 108
ISO 8821:1989
ISO 20806:2009
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 6544:1981
(replaced by )
TC 121
ISO 88353:2007/Amd 1:2010
(replaced by )
IEC 60601-213:2003/Amd
1:2006
(replaced by )
TC 150
ISO 10310:1995
(replaced by )
TC 164
ISO 12737:2010
(replaced by )
TC 177
Caravans
ISO 8818:1988
(replaced by )
TC 210
Quality management and corresponding general aspects for medical devices
ISO/TS 19218:2005
(replaced by ISO/TS 19218-1:2011, ISO/TS 19218-2:2012)
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO 17076:2006
ISO 26082:2007
Meeting calendar
(update at 01 March 2012)
Meetings called for the month of April are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
May 2012
1-4
Jeju (Korea,
Republic of)
TC 28
Jeju (Korea,
Republic of)
TC 28/SC 5
Petroleum products and lubricants/Measurement of refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels
Dublin (Ireland)
TC 242
Energy Management
6-9
Vancouver
(Canada)
TC 215
Health informatics
Ittigen
(Switzerland)
TC 113/SC 1 Hydrometry/Velocity area methods
7-10 Berlin
(Germany)
TC 22/SC 13 Road vehicles/Ergonomics applicable to road vehicles
7-11 Berlin
(Germany)
TC 46
7-11 Berlin
(Germany)
TC 46/SC 4
Information and documentation/Technical interoperability
7-11 Berlin
(Germany)
TC 46/SC 11 Information and documentation/Archives/records management
7-11 Ittigen
(Switzerland)
TC 113
TC 113/SC 5 Hydrometry/Instruments, equipment and data management
Ittigen
(Switzerland)
Hydrometry
8-10 Sydney
(Australia)
TC 145/SC 1 Graphical symbols/Public information symbols
Berlin
(Germany)
TC 44/SC 9
Sydney
(Australia)
TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, symbols and colours
Welding and allied processes/Health and safety
9-10 Haifa (Israel)
TC 184/SC 5 Automation systems and integration/Interoperability, integration, and architectures for

enterprise systems and automation applications
9-11 Panama
(Panama)
TC 8/SC 1
Ships and marine technology/Lifesaving and fire protection
10
TC 24/SC 8
Particle characterization including sieving/Test sieves, sieving and industrial screens
Berlin
(Germany)
10
Chicago (USA)
TC 68
Financial services
10
Ittigen
(Switzerland)
TC 113/SC 6 Hydrometry/Sediment transport
10
Ittigen
(Switzerland)
TC 113/SC 8 Hydrometry/Ground water
10
Sydney
(Australia)
TC 145
Graphical symbols
10
Stockholm
(Sweden)
TC 238
Solid biofuels
11
Berlin
(Germany)
TC 24
Particle characterization including sieving
1415
Stockholm
(Sweden)
JTC 1/SC 27
Information technology/IT Security techniques
1415
Rio de Janeiro
(Brazil)
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Drilling and production equipment
1416
Hsingue
(France)
TC 252
Project committee: Natural gas fuelling stations for vehicles
1417
Nadi (Fiji)
COPOLCO
Committee on consumer policy
1418
Campos do
Jordo (Brazil)
TC 20/SC 14 Aircraft and space vehicles/Space systems and operations
1418
Hangzhou
(China)
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
1516
Luzern
(Switzerland)
TC 23/SC 3
Tractors and machinery for agriculture and forestry/Safety and comfort
1516
Paris (France)
TC 259
Project committee: Outsourcing
1517
Buenos Aires
(Argentina)
TC 67/SC 5
gas industries/Casing, tubing and drill pipe
16
Milan (Italy)
TC 136
Furniture
17
Orlando (USA)
TC 10/SC 6
Technical product documentation/Mechanical engineering documentation
18
Orlando (USA)
TC 10
Technical product documentation
18
Orlando (USA)
TC 10/SC 1
Technical product documentation/Basic conventions
2025
Jeju (Korea,
Republic of)
JTC 1/SC 7
Information technology/Software and systems engineering
21
Mississauga
(Canada)
TC 171/SC 2 Document management applications/Application issues
2123
Shanghai
(China)
TC 131/SC 6 Fluid power systems/Contamination control
2124
Daejon (Korea,
Republic of)
TC 249
Traditional chinese medicine
2125
Berlin
(Germany)
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
2125
Mississauga
(Canada)
TC 171
22
Delft
(Netherlands)
TC 195/SC 1 Building construction machinery and equipment/Machinery and equipment for concrete
work
2225
Delft
(Netherlands)
TC 195
23
Tokyo (Japan)
TC 173/SC 7 Assistive products for persons with disability/Accessible design
2324
Dsseldorf
(Germany)
TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
2324
Pau (France)
TC 67/SC 7
2325
Mississauga
(Canada)
TC 171/SC 1 Document management applications/Quality
24
Seoul (Korea,
Republic of)
TC 122/SC 4 Packaging/Packaging and Environment
24
Tokyo (Japan)
TC 173
24
Tokyo (Japan)
TC 268/SC 1 Sustainable development in communities/Smart urban infrastructure metrics
2425
La Plaine StDenis (France)
TC 17/SC 3
2425
Toronto
(Canada)
TC 171/SC 3 Document management applications/General issues
2425
Tokyo (Japan)
TC 268/SC 1 Sustainable development in communities/Smart urban infrastructure metrics
25
Seoul (Korea,
Republic of)
TC 44/SC 12 Welding and allied processes/Soldering materials
25
Seoul (Korea,
Republic of)
TC 228
Tourism and related services
2930
Moscow
(Russian
Federation)
TC 67/SC 8
gas industries/Arctic operations
gas industries/Offshore structures
Steel/Steels for structural purposes
May-June 2012
28-1 Helsinki
(Finland)
** TC 35
28-1 Helsinki
(Finland)
** TC 35/SC 9
Paints and varnishes/General test methods for paints and varnishes
28-1 Helsinki
(Finland)
** TC 35/SC 12 Paints and varnishes/Preparation of steel substrates before application of paints and
related products
28-1 Helsinki
(Finland)
** TC 35/SC 14 Paints and varnishes/Protective paint systems for steel structures
28-1 Milan (Italy)
TC 173/SC 1 Assistive products for persons with disability/Wheelchairs
28-1 Bogota
(Colombia)
TC 223
Societal security
31-5 Berlin
(Germany)
JTC 1/SC 32
Information technology/Data management and interchange
31-1 Paris (France)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
31-1 London (United

Kingdom)
TC 67/SC 6
gas industries/Processing equipment and systems
TC 44/SC 3
Welding and allied processes/Welding consumables
June 2012
4-5
Berlin
(Germany)
4-7
Paris (France)
TC 85/SC 5
Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle
4-7
Paris (France)
TC 85/SC 6
Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
4-8
Tel Aviv (Israel) ** TC 34/SC 5
Food products/Milk and milk products
5-6
Paris (France)
Carbon capture and storage (CCS)
TC 265
Berlin
(Germany)
TC 44/SC 7
Welding and allied processes/Representation and terms
Paris (France)
TC 85/SC 2
Nuclear energy, nuclear technologies, and radiological protection/Radiological

protection
7-8
Toulouse
(France)
TC 211
Paris (France)
TC 85
Incheon (Korea,
Republic of)
TC 94/SC 14 Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
Berlin
(Germany)
TC 96
1015
Stockholm
(Sweden)
TC 184/SC 4 Automation systems and integration/Industrial data
1113
Woods Hole
(USA)
TC 43/SC 3
Acoustics/Underwater acoustics
1113
Dresden
(Germany)
TC 126
Tobacco and tobacco products
1115
Kyoto (Japan)
TC 121
1115
Kyoto (Japan)
TC 121/SC 1 Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic

machines
1115
Kyoto (Japan)
TC 121/SC 2 Anaesthetic and respiratory equipment/Airways and related equipment
1115
Kyoto (Japan)
TC 121/SC 3 Anaesthetic and respiratory equipment/Lung ventilators and related equipment
1115
Kyoto (Japan)
TC 121/SC 4 Anaesthetic and respiratory equipment/Terminology and semantics
1115
Kyoto (Japan)
1115
Kyoto (Japan)
** TC 121/SC 8 Anaesthetic and respiratory equipment/Suction devices for hospital and emergency
care use
1115
Paris (France)
TC 156
1115
Stresa (Italy)
TC 229
Nanotechnologies
1115
Prague (Czech
Republic)
TC 251
Project committee: Asset management
1116
TC 147
Water quality
1213
** TC 17/SC 17 Steel/Steel wire rod and wire products
1213
Kettering
(United
Kingdom)
13
Cranes
TC 121/SC 6 Anaesthetic and respiratory equipment/Medical gas systems
TC 137
Footwear sizing designations and marking systems
Brugge
(Belgium)
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
13
TC 147/SC 3 Water quality/Radiological methods
1314
Geneva
(Switzerland)
14
Westminster,
** TC 67/SC 3
Colorado (USA)
TMB
Technical Management Board

gas industries/Drilling and completion fluids, and well cements
1415
Paris (France)
TC 91
15
Paris (France)
TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets
1622
Tokyo (Japan)
1819
Dsseldorf
(Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
1922
Vienna (Austria) *
REMCO
Committee on reference materials
1922
San Jos (Costa *

Rica)
TC 71
Concrete, reinforced concrete and pre-stressed concrete
1922
San Jos (Costa *

Rica)
TC 71/SC 1
Concrete, reinforced concrete and pre-stressed concrete/Test methods for concrete
1922
San Jos (Costa *

Rica)
TC 71/SC 4
Concrete, reinforced concrete and pre-stressed concrete/Performance requirements for

structural concrete
1922
San Jos (Costa *

Rica)
TC 71/SC 5
Concrete, reinforced concrete and pre-stressed concrete/Simplified design standard for

concrete structures
1922
San Jos (Costa *

Rica)
TC 71/SC 6
Concrete, reinforced concrete and pre-stressed concrete/Non-traditional reinforcing

materials for concrete structures
1922
San Jos (Costa *

Rica)
TC 71/SC 8
Concrete, reinforced concrete and pre-stressed concrete/Environmental management

for concrete and concrete structures
20
Yangzhou
(China)
TC 100
Chains and chain sprockets for power transmission and conveyors
2021
Paris (France)
TC 17/SC 11 Steel/Steel castings
2021
Milan (Italy)
TC 29/SC 10 Small tools/Assembly tools for screws and nuts, pliers and nippers
2122
Paris (France)
TC 22/SC 3
Road vehicles/Electrical and electronic equipment
22
Porto (Portugal) *
TC 87
Cork
22
Kruger Park
(South Africa)
TC 110/SC 4 Industrial trucks/Rough-terrain trucks
2428
Bangkok
(Thailand)
TC 207/SC 7 Environmental management/Greenhouse gas management and related activities
2429
Madrid (Spain)
TC 37
2430
Bangkok
(Thailand)
TC 207
2529
Brasilia (Brazil)
JTC 1/SC 34
Information technology/Document description and processing languages
2529
Brussels
(Belgium)
TC 34/SC 9
Food products/Microbiology
2529
Madrid (Spain)
TC 37/SC 5
Terminology and other language and content resources/Translation, interpreting and

related technology
2529
St Paul,
Minnesota (USA)
TC 94/SC 6
Personal safety -- Protective clothing and equipment/Eye and face protection
2529
Buffalo (USA)
TC 108
2529
Buffalo (USA)
TC 108/SC 3 Mechanical vibration, shock and condition monitoring/Use and calibration of vibration
and shock measuring instruments
26
Lisbon
JTC 1/SC 23
** TC 69
Surface active agents
Information technology/Digitally Recorded Media for Information Interchange and
(Portugal)
Storage
2627
Dsseldorf
(Germany)
2627
Berlin
(Germany)
TC 153/SC 2 Valves/Valve actuator attachment
2627
Beijing (China)
TC 263
28
Buffalo (USA)
TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating
systems
28
Bangkok
(Thailand)
TC 207/SC 1 Environmental management/Environmental management systems
29
Madrid (Spain)
TC 37/SC 1
Terminology and other language and content resources/Principles and methods
29
Madrid (Spain)
TC 37/SC 2
Terminology and other language and content resources/Terminographical and

lexicographical working methods
29
Paris (France)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
29
Madison (USA)
TC 149/SC 1 Cycles/Cycles and major sub-assemblies
29
Oranjewoud
(Netherlands)
TC 188
TC 17/SC 9
Steel/Tinplate and blackplate
Coalbed methane (CBM)
Small craft
July 2012
9-13 (China)
** TC 134
Fertilizers and soil conditioners
16
Denver (USA)
18
Denver (USA)
** TC 44/SC 11 Welding and allied processes/Qualification requirements for welding and allied
processes personnel
19
Berlin
(Germany)
TC 261
Additive manufacturing
1920
Denver (USA)
TC 44
20
Lancaster (USA)
TC 43/SC 2
Acoustics/Building acoustics
21
Stockholm
(Sweden)
TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
** JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia

information
Clinical laboratory testing and in vitro diagnostic test systems
August 2012
2224
Berlin
(Germany)
TC 212
2731
Montreal
(Canada)
** JTC 1/SC 35
Information technology/User interfaces
September 2012
3-7
La Rochelle
(France)
** TC 163
3-7
La Rochelle
(France)
** TC 205
Zurich
(Switzerland)
** TC 142
7-8
(Russian
Federation)
** TC 20/SC 8
Aircraft and space vehicles/Aerospace terminology
8-16 Busan (Korea,

Republic of)
JTC 1/SC 36
Information technology/Information technology for learning, education and training
10
Milan (Italy)
TC 21/SC 2
Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
10-
Geneva
JTC 1/SC 22
Information technology/Programming languages, their environments and system
11
(Switzerland)
software interfaces
1012
Milan (Italy)
TC 21/SC 5
Equipment for fire protection and fire fighting/Fixed firefighting systems using water
1012
Shandong
(China)
TC 206
Fine ceramics
1014
Nancy (France)
1014
TC 153/SC 1 Valves/Design, manufacture, marking and testing
1014
Helsinki
(Finland)
TC 190
Soil quality
14
Beijing (China)
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
1721
Stockholm
(Sweden)
** TC 165
Timber structures
1820
Berlin
(Germany)
TC 122
Packaging
1920
Rio de Janeiro
(Brazil)
TC 67
gas industries
1921
San Diego (USA) *
GA
General Assembly
22
San Diego (USA) *
COUNCIL
Council
2326
Rio de Janeiro
(Brazil)
2326
Vienna (Austria)
2425
Ottawa
(Canada)
2425
Rio de Janeiro
(Brazil)
** TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
2426
Sydney
(Australia)
2428
Stockholm
(Sweden)
** JTC 1/SC 38
2526
Rio de Janeiro
(Brazil)
** TC 164/SC 2 Mechanical testing of metals/Ductility testing
2527
Rio de Janeiro
(Brazil)
** TC 164/SC 5 Mechanical testing of metals/Fatigue testing
27
Rio de Janeiro
(Brazil)
** TC 164/SC 1 Mechanical testing of metals/Uniaxial testing
28
Rio de Janeiro
(Brazil)
** TC 164
Milan (Italy)
** TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm systems
Milan (Italy)
** TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and firefighting
systems using foam and powder
Milan (Italy)
** TC 21/SC 8
Equipment for fire protection and fire fighting/Gaseous media and firefighting systems
using gas
TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to mechanical

vibration and shock
** TC 164/SC 3 Mechanical testing of metals/Hardness testing

TC 215
Health informatics
TAG 8
Building
TC 54
Essential oils
(Korea, Republic ** TC 133

of)
Sizing systems and designations for clothes
Cadiz (Spain)
** TC 213
Rotorua (New
** TC 218
Timber
Zealand)
September-October 2012
30-6 Paris (France)
TC 106
Dentistry
3rd Quarter 2012

Frankfurt
(Germany)
** TC 184/SC 1 Automation systems and integration/Physical device control
October 2012
1-2
Ottawa
(Canada)
TC 34/SC 11 Food products/Animal and vegetable fats and oils
Ottawa
(Canada)
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
4-5
MontanaVermala
(Switzerland)
TC 226
Materials for the production of primary aluminium
Berlin
(Germany)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
Chicago (USA)
TC 130
Graphic technology
Berlin
(Germany)
TC 254
Safety of amusement rides and amusement devices
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
8-11 Nagoya (Japan) *

8-12 (USA)
** TC 154
Processes, data elements and documents in commerce, industry and administration
9-10 Montreal
(Canada)
TC 199
Safety of machinery
1011
Berlin
(Germany)
TC 167
Steel and aluminium structures
1012
Munich
(Germany)
TC 172/SC 6 Optics and photonics/Geodetic and surveying instruments
1112
Bogota
(Colombia)
CASCO
1112
Tokyo (Japan)
TC 119
Powder metallurgy
1418
Tokyo (Japan)
** TC 10/SC 8
1419
Tokyo (Japan)
TC 59
1419
Praia do Forte
(Brazil)
TC 127
Earth-moving machinery
15
Sydney
(Australia)
TC 2/SC 7
Fasteners/Reference standards
1519
Montreal
(Canada)
TC 6
Paper, board and pulps
1519
Riccione (Italy) *
TC 45
1519
Riccione (Italy) *
TC 45/SC 1
Rubber and rubber products/Hoses (rubber and plastics)
1519
Riccione (Italy) ** TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
1519
Amsterdam
(Netherlands)
Air quality
TC 146
Technical product documentation/Construction documentation
16
Sydney
(Australia)
TC 2/SC 11
Fasteners/Fasteners with metric external thread
17
Sydney
(Australia)
TC 2/SC 14
Fasteners/Surface coatings
17
(Korea, Republic ** TC 17/SC 7

of)
Steel/Methods of testing (other than mechanical tests and chemical analysis)
17
Berlin
(Germany)
TC 22/SC 9
Road vehicles/Vehicle dynamics and road-holding ability
1719
Guilin (China)
TC 202
Microbeam analysis
18
Sydney
(Australia)
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
18
Riccione (Italy) *
TC 45/SC 2
Rubber and rubber products/Testing and analysis
18
Berlin
(Germany)
1819
of)
Steel
19
Sydney
(Australia)
TC 2
Fasteners
19
Riccione (Italy) *
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for use in the rubber
industry
2126
Sapporo (Japan) *
TC 92
Fire safety
2126
Sapporo (Japan) *
TC 92/SC 1
Fire safety/Fire initiation and growth
2126
Sapporo (Japan) ** TC 92/SC 2
Fire safety/Fire containment
2226
(Japan)
Safety of toys
2227
Jeju (Korea,
Republic of)
23
Sydney
(Australia)
** TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for soil, waste and drainage (including land drainage)
24
Sydney
(Australia)
for water supplies
24
Sydney
(Australia)
for the supply of gaseous fuels
25
Sydney
(Australia)
for industrial applications
25
Sydney
(Australia)
** TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes,
fittings and valves of plastic materials and their accessories -- Test methods and basic
specifications
25
Sydney
(Australia)
** TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes
and fittings for all applications
25
Sydney
(Australia)
** TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary
equipment of plastics materials
2526
Tampa, Florida
(USA)
2527
Florida (USA)
** TC 201
26
Sydney
(Australia)
** TC 138
Plastics pipes, fittings and valves for the transport of fluids
** TC 83
** TC 181
TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
TC 112
Vacuum technology
Messina (Italy)
** TC 8
(USA)
** TC 36
Cinematography
(France)
** TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
Yokohama
(Japan)
** TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials
(excluding hardmetals)
Beijing (China)
** TC 184/SC 2 Automation systems and integration/Robots and robotic devices
October-November 2012
29-1 Saitama (Japan)
31-7 Orlando (USA)
TC 34/SC 17 Food products/Management systems for food safety

*
TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment
and systems
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
TC 98
Bases for design of structures
November 2012
5
Berlin
(Germany)
5-8
Warsaw (Poland)*
5-10 Jeju (Korea,

Republic of)
** JTC 1
6-8
Tokyo (Japan)
TC 17/SC 1
Steel/Methods of determination of chemical composition
6-8
Reykjavik
(Iceland)
TC 234
Fisheries and aquaculture
1216
Kyoto (Japan)
** TC 244
Industrial furnaces and associated processing equipment
1516
Xian (China)
TC 227
Springs
2627
London (United *
Kingdom)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
2630
Florianopolis
(Brazil)
TC 43
Acoustics
2630
Florianopolis
(Brazil)
TC 43/SC 1
Acoustics/Noise
2729
Washington, D.C *
(USA)
TC 20
(Korea, Republic ** TC 23/SC 7

of)
Tractors and machinery for agriculture and forestry/Equipment for harvesting and
conservation
Wiesbaden
(Germany)
** TC 67/SC 3
(USA)
** TC 118/SC 6 Compressors and pneumatic tools, machines and equipment/Air compressors and
compressed air systems
Kyoto (Japan)
** TC 159/SC 4 Ergonomics/Ergonomics of human-system interaction
(Mexico)
** TC 229
Nanotechnologies
(United
Kingdom)
** TC 157
Non-systemic contraceptives and STI barrier prophylactics
Gaithersburg
(USA)
** TC 172/SC 9 Optics and photonics/Electro-optical systems
(Saudi Arabia)
** TC 211
4th Quarter 2012
Month unknown 2012
(Europe)
** JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data

representation
January 2013
7-12 London (United *
Kingdom)
(Unknown)
TC 121/SC 3 Anaesthetic and respiratory equipment/Lung ventilators and related equipment
** TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis
February 2013
4-8
(Unknown)
** TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
February-March 2013
25-1 (South America) ** JTC 1/SC 35
March 2013
1922
Jeju (Korea,
Republic of)
TC 107
Metallic and other inorganic coatings
2728
Geneva
(Switzerland)
COUNCIL
Council
April 2013
1011
Helsinki
(Finland)
** TC 117
Fans
2324
Dresden
(Germany)
** TC 219
Floor coverings
Paris (France)
** TC 29/SC 5
Small tools/Grinding wheels and abrasives
Salzburg
(Austria)
** TC 89
Wood-based panels
Shenzen (China) ** TC 130
Graphic technology
(USA)
** TC 178
Lifts, escalators and moving walks
May 2013
1316
Chicago (USA)
** TC 195
1317
(Italy)
** TC 29
Small tools
1317
(Italy)
** TC 29/SC 8
Small tools/Tools for pressing and moulding
1317
Guangzhou
(China)
TC 68
Financial services
1317
Guangzhou
(China)
TC 68/SC 2
Financial services/Financial Services, security
2731
Shanghai
(China)
TC 4
Rolling bearings
Ottawa
(Canada)
** JTC 1/SC 38
(China)
** TC 10
Technical product documentation
Paris (France)
** TC 46/SC 11 Information and documentation/Archives/records management
(Unknown)
** TC 158
Analysis of gases
** TC 115
Pumps
June 2013
5
Prague (Czech
Republic)
1721
Shanghai
(China)
** TC 121
Washington, D.C ** TC 67/SC 3

(USA)

2nd Quarter 2013

(Canada)
** TC 34/SC 4
Food products/Cereals and pulses
August 2013
2630
(South America) ** JTC 1/SC 35
September 2013
1820
St. Petersburg
(Russian
Federation)
GA
General Assembly
21
St. Petersburg
(Russian
Federation)
COUNCIL
Council
Paris (France)
** TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete
(Unknown)
** TC 21
Equipment for fire protection and fire fighting
Victoria
(Canada)
** TC 33
Refractories
(Korea, Republic ** TC 123/SC 2 Plain bearings/Materials and lubricants, their properties, characteristics, test methods
of)
and testing conditions
(Korea, Republic ** TC 123/SC 3 Plain bearings/Dimensions, tolerances and construction details
of)
(Korea, Republic ** TC 123/SC 5 Plain bearings/Quality analysis and assurance
of)
(Korea, Republic ** TC 123/SC 6 Plain bearings/Terms and common items
of)
(Korea, Republic ** TC 123/SC 7 Plain bearings/Special types of plain bearings
of)
Tokyo (Japan)
** TC 142
October 2013
7
Istanbul (Turkey)** TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
7-11 Istanbul (Turkey)** TC 38
Textiles
Istanbul (Turkey)** TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
Istanbul (Turkey)** TC 38/SC 23 Textiles/Fibres and yarns
10
Istanbul (Turkey)** TC 38/SC 24 Textiles/Conditioning atmospheres and physical tests for textile fabrics
11
Garching
(Germany)
** TC 60
Gears
11
Garching
(Germany)
** TC 60/SC 1
Gears/Nomenclature and wormgearing
11
Garching
(Germany)
** TC 60/SC 2
Gears/Gear capacity calculation
(France)
** TC 111/SC 1 Round steel link chains, chain slings, components and accessories/Chains and chain
slings
Mexico (Mexico) ** TC 113
Hydrometry
Berlin
(Germany)
** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments
(Japan)
** TC 206
Fine ceramics
November 2013
10
Okinawa (Japan) ** TC 201
(France)
** JTC 1
4th Quarter 2013

of)
Dentistry
Month unknown 2013

(Australia)
** REMCO
(South Africa)
** TC 27
Solid mineral fuels
(South Africa)
** TC 37
(Unknown)
** TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
(South Africa)
** TC 44
Porto de
** TC 135/SC 9 Non-destructive testing/Acoustic emission testing
Galinhas (Brazil)
(Norway)
for soil, waste and drainage (including land drainage)
(Brazil)
** TC 155
Nickel and nickel alloys
(Sweden)
** TC 163
Amsterdam
(Netherlands)
** TC 164/SC 5 Mechanical testing of metals/Fatigue testing
(Unknown)
** TC 173/SC 2 Assistive products for persons with disability/Classification and terminology
(South Africa)
** TC 202
Microbeam analysis
(Sweden)
** TC 205
(Portugal)
** TC 228
Tourism and related services
(South Africa)
** TC 242
Energy Management
(Finland)
** TC 257
General technical rules for determination of energy savings in renovation projects,

industrial enterprises and regions
May 2014
15
London (United *
Kingdom)
TC 68
Financial services
Washington, D.C ** TC 46/SC 11 Information and documentation/Archives/records management

(USA)
September 2014
(South Africa)
** TC 178
Lifts, escalators and moving walks
Month unknown 2014

(USA)
** REMCO
(Brazil)
** TC 28
Beijing (China)
** TC 36
Cinematography
(Germany)
** TC 37
(Japan)
** TC 44
(USA)
** TC 142
2nd Quarter 2015

(China)
** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments
Month unknown 2015

(South Africa)
** REMCO
(Finland)
** TC 44
London (United ** TC 142

Kingdom)
(China)
Nickel and nickel alloys
** TC 155
Month unknown 2016

(Australia)
** TC 44

Iso

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Iso

Uploaded by

Copyright:

Available Formats

International Standards in process

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

Metric series wires for measuring screw threads

Ships and marine technology

Paints and varnishes

Paints and varnishes Terms and definitions

Terminology and other language and content resources

Translation Services Requirements for translation services

ISO 101401:2010/CD Amd

ISO 101405:2010/CD Amd

Rubber and rubber products

Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated

Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures

Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress

Rubber and plastics Polymer dispersions and rubber latices Determination of pH

Applications of statistical methods

Control charts Part 5: Specialized control charts

Robust parameter design (RPD)

Cleaning equipment for air and other gases

UV-C Devices Safety information

Indoor air Part 29: Test methods for VOC detectors

Indoor air Part 30: Sensory testing of indoor air

Water quality Uranium isotopes Test method using alpha spectrometry

Water quality Calanoid copepod development test with Acartia tonsa

Implants for surgery

Processes, data elements and documents in commerce, industry and administration

Statistical data and metadata exchange (SDMX)

Optics and photonics

Ophthalmic instruments Ophthalmometers

Automation systems and integration

Small craft Liquefied petroleum gas (LPG) systems

Quality management and corresponding general aspects for medical devices

Elevating work platforms

Footwear Test methods for whole shoes Abrasion resistance

Footwear Test methods for whole shoes Flexing resistance

Resilient floor coverings Specification for rubber floor covering Tile/Plank

Information technology Telecommunications and information exchange between systems MAC/PHY

BioAPI for object oriented programming languages Part 1: Architecture

* Available in English only

Ships and marine technology

Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing

(Revision of ISO 5950:2008)

Aircraft and space vehicles

* Space systems Assessment of survivability of unmanned spacecraft against space

Space systems Programme management Requirements management

Space environment (natural and artificial) Methods for estimation of future

* Internal combustion engines Piston rings Part 4: General specifications

(Revision of ISO 6621-4:2003)

(Revision of ISO 6624-2:2003)

(Revision of ISO 6624-4:2003)

* Road vehicles Fuse-links Part 9: Fuse-links with shortened tabs (Type K)

(Revision of ISO 14230-2:1999)

(Revision of ISO 15830-1:2005)

(Revision of ISO 15830-2:2005)

(Revision of ISO 15830-3:2005)

(Revision of ISO 15830-4:2005)

Petroleum products and lubricants

(Revision of ISO 4261:1993)

* Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels

(Revision of ISO 11529-1:2005, ISO 11529-2:2005)

(Revision of ISO 9622:1999)