Professional Documents
Culture Documents
Techspec - Air Compressor
Techspec - Air Compressor
Techspec - Air Compressor
SCOPE:
SUPPLY, ERECTION & COMMISSIONING OF 3 NOS. "SCREW TYPE AIR COMPRESSOR UNIT" COMPLYING WITH SPECIFICATIONS FOR EACH
COMPRESSOR UNIT AS BELOW :
SL. NO.
1.0
1.1
2.0
2.1
2.1.1
2.1.2
OFFERED
DEVIATION
REMARKS
Vendor to offer
Vendor to offer
2.1.3
2.1.4
2.1.5
2.1.6
2.1.7
2.2
2.3
2.4
2.4.1
2.4.2
AIR FILTERS: Set of suitable Air Filters consisting of Pre-Filter, Fine Filter
and Carbon Filter for application of the above Compressor to deliver dry
and clean compressed air of the required quality
AIR RECEIVER:
Capacity (minimum)
Max. Working Pressure
2.4.3
FP/F1
REQUIRED
Vendor to offer
1465 CFM
10 Kg. / Sq. Cm.
(or more)
9 Kg. / Sq. Cm.
One (or more)
200 KW (or more)
3 Phase, 415 V
Vendor to confirm
Vendor to offer and
submit details
Vendor to offer and
submit details
5000 Litres
12.5 Kg / Sq. Cm.
(or more)
Vendor to confirm
Page 1 of 6
SL. NO.
2.5
2.5.1
2.5.2
2.6
2.6.1
2.7
2.7.1
2.8
2.8.1
3.0
3.1
3.2
3.3
3.4
3.5
4.0
4.1
FP/F1
REQUIRED
OFFERED
DEVIATION
REMARKS
Vendor to offer
Vendor to submit
details
Vendor to offer
Vendor to offer
Vendor to offer
Vendor to confirm
3 - 4 Degree Celsius
50 Degree Celsius
Class - I
Class - IV
Class - I
Vendor to accept &
offer
Page 2 of 6
SL. NO.
5.0
5.1
Vendor to confirm
5.2
There shall not be any emissions from the machine except fumes of cutting
fluid during machining.
There should not be any effluent from the machine. In case there are any
effluents from the machine, requisite effluent treatment plant or pollution
control device should be built into the machine by the supplier.
Vendor to confirm
Vendor to confirm
Vendor to confirm
5.3
5.4
5.5
5.6
5.7
6.0
6.1
7.0
7.1
ANCHORING MATERIAL:
Complete set of anchoring materials including foundation bolts, nuts,
washers and levelling shoes etc for fixing of Compressor including other
items like Air Filter, Air Drier and Air Receiver etc. to the foundation should
be supplied.
FP/F1
REQUIRED
Vendor to offer
OFFERED
DEVIATION
REMARKS
Vendor to confirm
Vendor to confirm
Vendor to accept
Vendor to offer
Page 3 of 6
SL. NO.
8.0
8.1
9.0
9.1
9.2
9.3
9.4
10.0
10.1
11.0
11.1
12.0
12.1
12.2
FP/F1
REQUIRED
OFFERED
DEVIATION
REMARKS
Vendor to offer
Vendor to offer
Vendor to offer
Vendor to offer
Vendor to offer
Vendor to offer
vendor to confirm
Vendor to offer
Page 4 of 6
SL. NO.
13.0
13.1
14.0
14.1
QUALIFYING CONDITIONS:Only those vendors, who have supplied and commissioned at least two
Vendor to comply and
nos. "Screw type Air Compressor" of same or higher capacity (Air delivery
submit with offer
rate) in the past ten years (on the date of opening of tender) and such
Compressors are presently working satisfactory for more than six months
after commissioning (on the date of opening of tender ), should quote. The
following information should be submitted by the vendor about the
company (s) where similar compressors have been supplied. This is
required from all the vendors for qualification of their offer.
14.1.1
Vendor to inform
Vendor to arrange
14.1.2
14.1.3
14.1.4
14.1.5
14.1.6
14.1.7
14.1.8
FP/F1
REQUIRED
OFFERED
DEVIATION
REMARKS
Vendor to offer
Vendor to inform
Vendor to inform
Vendor to inform
Vendor to inform
Vendor to inform
Vendor to accept
Page 5 of 6
SL. NO.
15.0
15.1
15.2
FP/F1
REQUIRED
OFFERED
DEVIATION
REMARKS
Vendor to inform
Vendor to submit
Page 6 of 6