Professional Documents
Culture Documents
BUET MSC Admission Test 26.09.2014 Question by Rony Parvej PDF
BUET MSC Admission Test 26.09.2014 Question by Rony Parvej PDF
4. In a Y-connected balanced 3-phase circuit Vph = 208 V, p.f. =0.6, P = 300W. Zph = ? (
)
given line voltage 208V, power, pf 0.6. y-y connection balanced 3phase, find impedance on
each phase-math ( )
5. v= 20 sin (t) + 15 sin (2t) 10 sin (3t)
i = 6 sin (t+20) + 2sin (t +30) - sin (3t + 60) . Find average power.
(
)
( )
Draw Vin vs Vout transfer curve of an op amp with 5v reference at negative input, sine wave in
positive input , biasing 12V, at output two zener diodes of 7V and 9V were connected face-toface. ( )
12. Answer in one word:
i) peak demand in summer in BD
ii) load factor of a base load station
iii)
Iv)
v)
13. 5 MCQ Questions
14. Draw the CMOS complex gate logic circuit function on F = A (B + C ) .
( )
Zener diode math with fixed load (a very tough one indeed) with PZ, IZ, IZK, RL. Find output
voltage. ( )
16. Find VC , and for common emitter bias.
20. x (t) = 1.5 cos (800t) is to be PCM with minimum SQNR of 25dB. How many bytes are
required for encoding each having uniform quantization.
21.
23. Draw the block diagram of a optical fibre communication system. What type of technique is
widely used in multiplexing and what is the most common wavelength used in optical fiber now
a days.
24. a verilog code was given which was actually a Negative edge clock D-FlipFlop.
execute