Professional Documents
Culture Documents
University College of Technology & Innovation: Ee001-3-1-Analysis of Circuits
University College of Technology & Innovation: Ee001-3-1-Analysis of Circuits
EE001-3-1-ANALYSIS OF CIRCUITS
TITLE
: INVERTING AMPLIFIER
EXPT. No.
:3
INTAKE
LECTURER
: SARVESWAREN KARUNANITHI
DATE
Objective
The objective of this experiment is to enable students to gain experience on
operational amplifier circuit.
Procedure
1) Construct the circuit shown in Figure 3.1 where Rin = 1 k and Rf = 5 k.
2) Record the nominal and measured resistors values in Table 3.1.
3) Calculate the theoretical voltage gain using the measured resistance values
(AVT = - Rf /Rin).
4) Set the DC power supply voltages such that V+ is +15 V and V- is -15 V.
5) Set the AC voltage from the function generator as sine wave, 1 kHz and 3 Vp-p.
6) Measure the AC voltage, Vs with DMM.
7) Measure the output voltage of the operational amplifier, VO.
8) Calculate the measured voltage gain (AVM = - VO / VS) and determine the
percentage difference between the measured and theoretical values.
Figure 3.1
Figure 3.2
Resistance (k)
Nominal %
Measured
tolerance
R1
R2
Table 3.2
Parameters
VS
Measured
Theoretical
VO
AV
Discussion
Conclusion
% Difference