JERICHO Horn Speaker
DIY Horn Speaker
Here is my HORN
Itis self made. | use 21mm MDF.
The driver is a FOSTEX FE 208 SIGMA
Diameter of the Driver is 230 mm, The complete Horn has
a efficency of 100 dB with 2,83 Volt input in 1 meter. The
Driver has a Impedance of 8 Ohms so 2,83 Volts are
exactly 1 Watt input power, The Dynamic is enormus. The
plan was in the German Magazine " Klang und Ton” issue
2196 and it is called the JERICHO HORN. | am very happy
with the sound. This is the perfect speaker for single ended
amp's
Picture of the FOSTEX FE 208 SIGMA driver
Specifications of the FE 208 Sigma DriverSpecifications Frequency Response / Impedance
&
Thiele/Small Parameters 140
Impedance ohm 0
Minimum Frequency Response ow
ase « som
Reproduction Frequency Response ” on
f= 20kH2 8 2
SPL. 3650B/¥ «ny 8 a
Raed 17 aw (8) ‘
Wane Rego a a a
“Tuuivalont Diaghram Radus
Simm (3.192) “Dimensions & Mounting Information
Teuivalen Mass > 12g (O026Tby
Magnot Weight 1 kg 86)
Net Weight Aske iby
Bae
Re ohm |
Os ea qe
‘Gms 403. ~~*
Ges 02 3]
Tass
Tammy
a FE208»
REL Cl
2 Sidewalls 1170x500 mm
4 Front 742x360 mm/21”
4 Back 1170x360 mm
1 Bottom 481x360 mm
1 Top 462x360 mm
Part 1 148x360 mm/35°/43°
Part 2 692x360 mm/45°/13°
Part 3 698x360 mm/6"/0°
Part 4 691x360 mm/0"/0°
Part 5 200x360 mm/21"/10°
Part 6 292x360 mm/25°/65°
Part 7 70x360 mm/46*/39°
Part 8 60x360mm/40"/40"
Part 9 95x360mm/45"/45"
The correction network. It is used to get a smoth frequency cure in the
middle. This you can see in the frequency picture. Without the correction
network you get the upper curve in the middle frequency's.
R2 and C2 are to smooth the impedance curve.
Rz You don't need them if your amp is a transistor design
R2=10.... 33 Ohm, C2= 15 uF
ec L1=1,0mH - air coil, wire diameter 1,4mm or more
C1=2,2uF MKP or MKP-SN or better one
(0 Ohm / 20 Walt Metall, | use 10 * 100 Ohm / 2Watt parallelFrequency response of the Horn
Sensitivity fag ~ dB SPLwatt (8 che toed) (1.00 ct26
Der Sperrkreis L1/C1/R1 glattet zwischen 400
und 8000 Hertz den Mitteltonbuckel des Breit-
banders FE 208 Sigma.
Building Instructions
The only damping material in the Hom is about 50gr.
wool just behind the driver. You can experiment with
the amount of wool to get the bass respose you need
for your room. 50gr. is in my opinion a good starting
point. I got the best results with it.
‘Also a good idea is to double the back side and the
side's of the mouth opening to get no coloration from
" side and back wall's. See on the picture
ture was send to me from someone
who has build the horns. ( Sorry I forgot who it was,
please give me a notice when you read this. )
WoodworkThere is nothing to say, look at the picture.
‘Some mail from builders
j: Jericho horn
i, 15 Jan 2002 18:06:19 Mitteleurop. Zeit
From: "Anil Advani"
To : UHAUMANN
Hello!
used the basic design of the Jericho horn but modified it to take Lowther PMA drive unit [I am using the 15,
ohms variety]. Took exact 7 days 10 hours per day with 3 of us working together to complete. I used 3/4" ply
‘wood for the entire cabinets, and rounded out each bend in the folded horn, So the cabinets are a bit larger than
the original Jericho plans. | used 1/4" cork sheeting to line the entire hom length thus smoothing out the
contours even more. | used a felt padding behind the driver in the compression chamber. The chamber was
adjusted to a vol of § liters and the hom throat is 60 square cm. | also put additional side panels and a double
sheet of ply for the bottom and back of the cabinets. The side panels are cut in a nice curved shape [will post,
photos of the speakers shortly to a website] so the whole speaker has a very pleasing look. The sound is,
amazing, this is like achieving audio Nirvana! The portrayal of every recording is superb, all the tiny cues and
details in the recording are clearly "visible". Soundstage extends beyond the speaker boundaries and is very
wide and deep. Bass is just right, not lacking - very natural. | wonder why most people who write about their
impressions on horn loaded full range speakers complain about less bass - | think the bass is tight, tuneful and
correct. Not lacking!
Cheers!
Anil
[from Bangladesh]
Literatur :
‘The plan was in the German Magazine " Klang und Ton" issue 2/96 and it is called the JERICHO HORN,
Back
| take no responsibilty forthe accuracy of information in these pages, or consequences of doing something stupid after reading these
pages. (c) Ulich Haumann, 1999 - 2010
‘The Homepage of this article you find under WWW PLASMATWEETER DE