Professional Documents
Culture Documents
NOV Adjustable Bend Housing Field Adjustment Procedures
NOV Adjustable Bend Housing Field Adjustment Procedures
Phone:(281)590-6966
Fax:(281)590-2280
Revision: A
Document No.
ADJHSGPNOV
Page 1 of 4
Contents
1. Preparations for Adjustment of ABH .......................................................................................1
2. Directions to Adjust ABH Angle ..............................................................................................2
3. Settings of Adjustable ABH Angle ..........................................................................................4
4. Make-up Torques ...................................................................................................................4
UPHOLE
CLAMP THIS AREA
LOOSEN IN THIS
DIRECTION
BIT
Figure 1
Revision: A
Document No.
ADJHSGPNOV
Page 2 of 4
ADJUSTING
RING
OFFSET HOUSING
Revision: A
Document No.
ADJHSGPNOV
Page 3 of 4
4. If needed, clean dirt and mud off of the housing faces and apply thread anti-seize
(Figure 5).
5. Ensure the desired bend angle on the Adjusting Ring is aligned with its matching
number on the Offset Housing, then engage the teeth and torque the connection
(Figure 6). See Table 2 for make-up torques.
STATOR ADAPTER HOUSING
ADJUSTING
RING
Figure 5
OFFSET HOUSING
Document No.
ADJHSGPNOV
Revision: A
Page 4 of 4
4. Make-up Torques
Ft-lbs
Nm
2-7/8
1,900
2,580
3-3/4
5,300
7,190
4-3/4
9,000
12,200
6-1/4
6-1/2 & 6-3/4
23,000
28,000
31,180
37,960
Table 2: ABH Make-up Torques
8
40,000
54,230
9-5/8
80,000
108,470
11-1/4
96,000
130,160