Professional Documents
Culture Documents
Comparitive Statement Between Pipes
Comparitive Statement Between Pipes
S.NO
MATERIAL
SPECIFICATION
TESTING REQUIREMENTS
REMARKS
A) Mandatory Requirements:
1) Chemical Analysis
2) Dimensions
3) Galvanising Test (As Applicable)
4) Hydrotest or Eddy Current Test
5) Tensile Test
6) Bend Test 50 mm
7) Flattening Test > 50 mm
8) Workmanship, Surface condition
IS 3589 - 2001
A) Mandatory Requirements:
1) Chemical Analysis
2) Tensile Test
3) Flattening Test
4) Guided Bend Test (For SAW welded pipes)
5) Hydrotest or NDE (As applicable)
6) Dimension & Mass per Meter
7) Visual Check - Workmanship & Appearance
A) Mandatory Requirements:
1) Chemical Analysis
2) Tensile Test
3) Bend Test ( shall also be carried out if pipe dia > 635mm and D/T is
< 7.0)
1) All pipes Shall be supplied in Killed condition
4) Hydrotest, NDE
2) Cold Formed pipe shall be Heat treated to
5) Dimension
650C (minimum)
6) Visual Check - Workmanship, Surface Condition & End finish
B) Supplementary Requirements (If specified in P.O):
1) Flattening Test
2) Etching Test
A) Mandatory Requirements:
1) 100% RT on Heavily Cold worked pipe prior to cold working &
welding to another pipe.
2) Heat Treatment
3) Grain Size
4) Chemical Analysis
5) Tensile Test
6) Tension Test
7) Flattening Test
8) Hydrotest or NDE (As applicable)
9) Visual Check - Workmanship, Surface Condition & End finish
10) Dimension
B) Supplementary Requirements (If specified in P.O):
1) Weld Decay Test for HCW pipes
2) Etching Test
3) Inter Granular Corrosion Test
4) Stabilizing Heat Treatment