Professional Documents
Culture Documents
Implant MCQs PDF
Implant MCQs PDF
Implant MCQs PDF
Lexicomp Online
BASIC PRINCIPLES
Question 1: Implants are most often made of:
A. Titanium
B. Hydroxyapatite
C. Stainless steel
D. Gold alloy
Answer: A.
Implants are made of titanium, because bone cells attach to it easily. B is wrong because some
implants are coated with hydroxyapatite, but the implant body is a titanium alloy. C and D are
wrong, because stainless steel and gold alloy would not be favorable to osseointegration.
Question 2: The rough surface of implants is:
A. Due to fabrication errors
B. Not desirable for osseointegration
C. Important to remove at the neck so that gingival plaque does not attach
D. Desirable for improved osseointegration
Answer: D.
Bone cells react best to titanium surfaces that are rough, and, thus, roughening improves
osseointegration. A is wrong because implant surfaces are smooth when fabricated, and
roughness is purposely added. B is wrong because, although roughness is not necessary, it
improves osseointegration. C is wrong because it is not possible to smooth a rough surface
clinically. Most implants have a smooth collar to avoid increased plaque collection in the event that
the neck becomes exposed to the oral cavity.
Question 3: Osseointegration means:
A. Full contact between bone and the implant body
crlonline.com/crlsql/servlet/crlonline
1/19
5/23/2011
Lexicomp Online
2/19
5/23/2011
Lexicomp Online
3/19
5/23/2011
Lexicomp Online
a probe. A is wrong because this is true for teeth only. B is wrong because a connective tissue
layer of 1 mm is always present. D is wrong because fibers lie only in a parallel direction.
Question 9: Peri-implantitis:
A. Is equivalent to gingivitis
B. Cannot be treated
C. Is usually limited to superficial soft tissue
D. Spreads rapidly to bone
Answer: D.
Peri-implantitis spreads rapidly to bone because of reduced resistance and blood flow at the
implant neck. A is wrong because peri-implantitis is an inflammation of peri-implant tissues
leading to bone loss. B is wrong because this condition can be treated and stabilized. C is wrong
because inflammation spreads to bone rapidly.
Question 10: Implant survival:
A. Is synonymous with implant success
B. Means that an implant is still present in the mouth after a period of time
C. Means that an implant is present and clinically satisfactory after a period of time
D. Means that the implant required some form of treatment to avoid failure
Answer: B.
Implant survival only refers to presence in the mouth. A is wrong because survival and success
have different meanings, although they are not always appropriately distinguished in the implant
literature. C is wrong because it describes a successful implant. D is wrong because it describes
an ailing implant.
DIAGNOSIS
Question 11: The minimum interarch space for a fixed implant-supported prosthesis is:
A. 4 mm
B. 6 mm
C. 7 mm
crlonline.com/crlsql/servlet/crlonline
4/19
5/23/2011
Lexicomp Online
D. 12 mm
Answer: C. 7 mm
A is wrong because 4 mm would not provide room for implant components. B is wrong because it
is the minimum buccolingual bone width that accommodates an implant that is 4 mm in diameter.
D is wrong because it is the minimum interarch distance for an implant-supported removable
prosthesis.
Question 12: Ridge mapping measures:
A. Attached gingiva by outlining the mucogingival junction
B. Soft tissues on a stone model
C. Bone width on a tomogram
D. Soft tissue thickness clinically to deduce bone width
Answer: D.
Ridge mapping consists of clinical bone sounding under local anesthesia and measurement of
gingival thickness to determine bone width. B is wrong, because, although the measurements
resulting from ridge mapping are eventually reported on a stone model, they are derived from
clinical measurement of soft tissues. A and C are wrong because they refer to clinical and
radiographic measurements.
Question 13: Panoramic radiographs are useful for:
A. Ruling out bony pathologies and estimating bone availability
B. Performing precise measurements of bone height and width
C. Selecting the height and width of implants
D. Detecting all existing anatomic limitations
Answer: A.
Panoramic radiographs are most useful for ruling out bony pathologies and estimating bone
availability. B is wrong because panoramic radiographs yield a high distortion. C is wrong
because this technique should be accompanied by other clinical and radiographic measurements.
D is wrong because panoramic radiographs distort bone height and some anatomic limitations
such as lingual concavities may not be seen.
crlonline.com/crlsql/servlet/crlonline
5/19
5/23/2011
Lexicomp Online
crlonline.com/crlsql/servlet/crlonline
6/19
5/23/2011
Lexicomp Online
Answer: B.
Hounsfield numbers are arbitrary numbers set for density on computed tomograms. A is wrong
because Hounsfield numbers are not specifically designed to measure bone density, although
some correlation can be made. C is wrong because all computed tomography applications use
Hounsfield numbers. D is wrong because this scale is used for computed tomography, not
magnetic resonance imaging.
Question 17: Radiographic templates are:
A. Used to visualize diagnostic teeth
B. Used to measure bone density
C. Used during implant surgery
D. Not useful in most implant cases
Answer: A.
Radiographic templates are acrylic devices used to visualize diagnostic teeth (or ideal implant
positions) on a radiograph. B is wrong because radiographic templates do not aid in evaluating
bone density. C is wrong because it describe surgical guides. Although radiographic templates
can be modified to become surgical guides, they are not the same. D is wrong because
radiographic templates should be used in most cases.
Question 18: A scannographic template is:
A. A requirement for aligning the mandible when taking computed tomography radiographs
B. Identical to any other radiographic template
C. Useful during implant surgeries
D. An aide for visualizing diagnostic teeth on a computed tomography image
Answer: D.
A scannographic template is an aide for visualizing diagnostic teeth on a computed tomography
image. A is wrong because, although highly recommended, a scannographic template is not
utilized to align the mandible. B is wrong because, unlike other radiographic templates,
scannographic templates should not use metal markers. C is wrong because it refers to a surgical
guide. Scannographic templates can often be modified into surgical guides.
Question 19: Which of the following statements about bone quality is true?
crlonline.com/crlsql/servlet/crlonline
7/19
5/23/2011
Lexicomp Online
TREATMENT PLANNING
Question 21: Screw-retained prostheses possess the following advantages:
A. Ease of fabrication
B. Ease of retrieval
C. Esthetics
D. Ease of connection to natural teeth
Answer: B.
Screw-retained prostheses are easy to retrieve for repair and maintenance. A is wrong because
crlonline.com/crlsql/servlet/crlonline
8/19
5/23/2011
Lexicomp Online
screw-retained prostheses are not easier to fabricate, and may even be more technique-sensitive
than cemented prostheses. C is wrong because screw access holes may be detrimental to
esthetics. D is wrong because there is no relationship between connection to natural teeth and the
type of implant prosthesis.
Question 22: Cemented prostheses possess the following advantages:
A. Ease of fabrication
B. Ease of retrieval
C. Strong resistance
D. Ease of connection to natural teeth
Answer: A.
Cemented prostheses are easier to fabricate because they are identical to traditional fixed partial
dentures. B is wrong because cemented restorations are more difficult to retrieve. C is wrong
because there is no indication that this design is more resistant. D is wrong because there is no
relationship between connection to natural teeth and the type of implant prosthesis.
Question 23: Connecting implants and teeth:
A. Is forbidden
B. Is useful for consolidating teeth with reduced periodontal support
C. Can be performed in all cases
D. Should be avoided whenever possible, but can be performed with careful consideration
Answer: D.
Connections between implants and teeth should be avoided whenever possible, but can be
performed with careful consideration. A is wrong because connecting implants and teeth is not
contra-indicated if proper measures are taken. B is wrong because implants do not consolidate
teeth. Teeth, especially if there is limited periodontal support, should be treated as cantilevers from
adjacent implants. C is wrong because the number of implants and spread should be considered
before connecting implants and teeth.
Question 24: When treatment planning edentulous cases:
A. Removable prostheses are always preferable
B. Fixed prostheses are always preferable
crlonline.com/crlsql/servlet/crlonline
9/19
5/23/2011
B. Fixed
Lexicomp Online
prostheses are always preferable
C. The decision between a fixed or removable prosthesis depends in part upon arch shape
10/19
5/23/2011
Question 27: Immediate
loading is:
Lexicomp Online
11/19
5/23/2011
increased
Online
predictably with bone grafting. BLexicomp
is wrong
because 2 mm of bone augmentation is what
can be expected when increasing bone height. Greater augmentation can be achieved when
increasing width. D is wrong because bone width augmentation is a predictable procedure in
carefully selected cases.
Question 30: Gingival grafts should be performed:
A. Prior to fabricating the final restoration
B. Preferably after the final restoration is delivered
C. Only prior to implant placement
D. Only between stage one and stage two surgeries
Answer: A.
Gingival grafts should be performed prior to fabricating the final restoration. B is wrong because it
is advisable to avoid gingival grafting after delivery of the final prosthesis. C is wrong because
gingival grafts can be performed while implants are healing. D is wrong because gingival grafts
can be performed before implant placement.
RESTORATION SEQUENCES
Question 31: Characteristics of implant-level impressions are:
A. Coping placement is easy because of visibility
B. Custom abutments are not available
C. Abutments must be selected in the mouth
D. Abutments can be selected in the laboratory
Answer: D.
Abutments can be selected in the laboratory. A to C are wrong because they are specific to
abutment-level impressions.
Question 32: Transfer-type impression copings:
A. Require a hole in the impression tray
B. Are easier to utilize than pick-up copings
C. Remain on the implant when the impression
crlonline.com/crlsql/servlet/crlonline
12/19
5/23/2011
Lexicomp Online
13/19
5/23/2011
Lexicomp Online
14/19
5/23/2011
Lexicomp Online
Question 38: Testing if screws can turn without resistance until the last quarter turn is:
A. Useful for verifying proper fit in multi-unit restorations
B. Only useful for implant bars
C. Only useful for single restorations
D. Useless in most clinical cases
Answer: A.
This test is useful for verifying proper fit, as well as lack of distortion in bridges. B is wrong
because while the test can be useful for implant bars, it is also useful for large bridges. C is wrong
because it is useful for multiple units only. D is wrong because it is a useful clinical test.
Question 39: After delivery of a screw-retained bridge:
A. It is important to close the screw access hole immediately with a permanent material
B. It is recommended to block the screw access hole with a temporary material
C. It is recommended to take measures so that screws will not need to be retightened at a later
time
D. It is recommended to remove the bridge and reposition it at a later time
Answer: B.
After delivery of a screw-retained bridge, it is recommended to block screw access holes with a
temporary material, such as Calcium oxide. A is wrong because further access to the screw may
be useful during the first few months. C is wrong because torquing of screws at later visits is
recommended. D is wrong because removal of the bridge has no advantage.
Question 40: For removable prostheses:
A. The male attachment is usually part of the denture
B. The attachment components do not have to be replaced
C. The female component may need replacement during maintenance
D. Screws are not accessible
Answer: C.
crlonline.com/crlsql/servlet/crlonline
15/19
5/23/2011
Lexicomp Online
The female components of the attachments of removable prostheses need to be checked and
changed regularly. A is wrong because female components are usually part of the denture. B is
wrong because replacements are necessary. D is wrong because screws retaining dentures are
usually easily accessible.
MAINTENANCE:
Question 41: When using a two-stage implant, radiographic bone level is expected to be:
A. At the top of the abutment
B. Flush with the implant head
C. At the level of the first thread
D. 4-5 mm apical to the implant head
Answer: C.
When using a two-stage implant, radiographic bone level is expected to be at the level of the first
thread. A is wrong because the abutment is always coronal to bone. B is wrong because this is the
bone level at the time of surgery. D is wrong because it represents bone loss.
Question 42: Mobility of an implant-supported crown generally means:
A. Failure of the implant
B. Occlusal traumatism
C. Normal flexing of abutments
D. Loosening of an implant component
Answer: D.
Most often, mobility of a single implant-supported crown is a sign that an implant component has
become loose. A is wrong because it is possible but very unlikely. B is wrong because occlusal
traumatism may cause mobility of teeth, but mobility of an implant complex is necessarily related to
another concomitant problem. C is wrong because normal mobility of components cannot be
detected clinically.
Question 43: Clinical inflammation around a single restored implant, associated with pain or
pressure, but no radiographic bone loss, is most likely due to:
A. Implant failure
crlonline.com/crlsql/servlet/crlonline
16/19
5/23/2011
Lexicomp Online
B. Peri-implantitis
C. Fracture of a component
D. Loosening of a component
Answer: D.
Most likely, this is due to component loosening. A is wrong because implant failure is unlikely at
this stage. B is possible but radiographic changes are likely. C is unlikely because the single
restoration would have become detached.
Question 44: If an implant has been placed apically, a 7 mm peri-implant probing shows no
sign of inflammation, and there is no radiographic change and no bleeding, this probably
indicates:
A. Normal functioning
B. Peri-implantitis
C. Implant failure
D. Component failure
Answer: A.
The signs suggest normal functioning. B is wrong because signs of inflammation are common with
peri-implantitis. C and D are wrong because signs of inflammation and radiographic changes are
likely with implant and component failures.
Question 45: At a maintenance visit, an implant-retained bar is found to be mobile at one
extremity. The following should be undertaken:
A. Place a watch in the records and reevaluate at the next visit
B. Refer for implant removal
C. Tighten the probable loose screw
D. Verify that the screw is loose and place a new one
Answer: D.
In this case, verify that the screw is loose and replace it with a new one. A is wrong because
mobility is not going to improve. B is wrong because the implant is unlikely to be the cause of
mobility. C is wrong because a loose screw should be discarded and replaced by a new one.
crlonline.com/crlsql/servlet/crlonline
17/19
5/23/2011
Lexicomp Online
mobility. C is wrong because a loose screw should be discarded and replaced by a new one.
Question 46: When observing a routine radiograph for an implant patient, you see a
horizontal dark line between the implant and what seems to be the abutment. This is
probably:
A. Normal
B. A sign of component loosening
C. A sign of peri-implantitis
D. A sign of implant failure
Answer: B.
This is probably a sign of a loose component. A is wrong because almost no implant system
contains a radio-clear component. C is wrong because peri-implantitis would show bone loss
around the implant. D is unlikely because if implant failure had occurred a dark line would probably
show along the body of the implant.
Question 47: Maintenance instrumentation for implants:
A. Is identical to instrumentation used on teeth
B. Should be plastic only
C. Is not necessary
D. Must not be made of stainless steel
Answer: D.
Maintenance instrumentation for implants must not be made of stainless steel, because it can
scratch soft titanium. A is wrong because instrumentation used on teeth is often made of stainless
steel. B is wrong because other materials are available. C is wrong because maintenance on
implants is important.
Question 48: If a patient has removable dentures, what generally needs to be done at yearly
visits?
A. A change of abutment screws
B. A change of female attachments
C. A reline of dentures
D. A change of abutments
crlonline.com/crlsql/servlet/crlonline
18/19
5/23/2011
Lexicomp Online
Answer: B.
Usually, female attachments of dentures are changed at yearly visits. A is wrong because screws
should not be touched unless loosening occurs. C is wrong because a reline is not necessary. D is
wrong because abutments are never changed.
Question 49: Which of the following should be recommended to patients for home care?
A. Implant brushes
B. Any interproximal brush
C. Oral rinses only
D. Superfloss or yarn
Answer: D.
Superfloss or yarn can be helpful for home care. A is wrong because special implant brushes do
not exist. B is wrong because brushes with stainless steel cores should be avoided. C is wrong
because oral rinses are not sufficient.
Question 50: Oral hygiene instructions for implants:
A. Are identical to instructions for teeth
B. Should include specific wrap-around techniques
C. Should specify staying away from implant surfaces
D. Should be reserved for fixed restorations
Answer: B.
Wrap-around techniques are a recommended method of oral hygiene for implants. A is wrong
because specific instructions for implants are important. C is wrong because cleaning of implant
surfaces is important. D is wrong because removable appliances require cleansing of implant
components and bars.
crlonline.com/crlsql/servlet/crlonline
19/19