Professional Documents
Culture Documents
UTP A 2535 NB
UTP A 2535 NB
TIG rod
Classifications
EN ISO 14343-A
Material-No.
WZ 25 35 Zr
1.4853
GX 40 CrNiSi 25 20
GX 40 NiCrSiNb 35 25
GX 40 NiCrSi 35 25
Si
Mn
Cr
Ni
Nb
Ti
Zr
Fe
0,4
1,0
1,7
25,5
35,5
1,2
balance
Tensile strength Rm
Elongation A
MPa
MPa
> 480
> 680
>8
Welding instruction
Clean welding area carefully. No preheating or post weld heat treatment. Keep heat input as low as
possible and interpass temperature at max. 150 C.
Rod diameter x length [mm]
Current type
2,0 x 1000
DC (-)
I1
2,4 x 1000
DC (-)
I1
3,2 x 1000
DC (-)
I1
All information provided is based upon careful investigation and intensive research.
However, we do not assume any liability for correctness and information is subject to change without notice.
03/2014 Rev. 0
www.voestalpine.com/welding