Professional Documents
Culture Documents
PQ Bambino QRG E Ver092007 Low
PQ Bambino QRG E Ver092007 Low
Material Group
HV HB HRC HRB HS
3 stainless steel
Use
Menu key
gets you to
next lower level
Impact Level
keys
Conversion Level
Scroll to proper selection
using
keys
material group
Selection Level
Hardness Leeb
without
with
correction of
direction
Display
Test Requirements
Mass and thickness
above 5 kg (11lbs)
Surface preparation
Clean, dry, smooth test surface required.
Roughness class ISO N7 and better
Max. roughness Rt 10 m (400 in.)
Mean roughness Ra 2 m (80 in.)
Avoid heat or surface deformation while
preparing the test surface.
on solid support
Recommendation
Periodically verify proper performance of your BAMBINO on a calibrated test block. Factory calibration once a year is
suggested by international quality standards on test instrumentation.
Error messages
Cause
Action
No rebound detected
Change conversion
Battery low
1. Place
Subject to change
Made in Switzerland
2. Load
3. Measure