Professional Documents
Culture Documents
21 Air Cond - New Original
21 Air Cond - New Original
A319/A320/A321
TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE
21 AIR CONDITIONING
01-04-2010
Page 1
01-04-2010
Page 2
21 AIR CONDITIONING
21 AIR CONDITIONING
UFD4200
TABLE OF CONTENTS
Page
GENERAL
System Presentation (1) .......................... 1
System Controls and Indicating (1)............... 7
ZONE TEMPERATURE CONTROL
System Presentation (1) ......................... 13
Pack Presentation (1)............................ 19
System Controls Presentation (1) (A320/A319) ... 23
System Controls Presentation (1) (A321) ........ 29
ECAM Pages Presentation (1) ..................... 35
System Warnings (3) .............................. 41
** Flow Control & Pack Components D/O (2) ...... 43
** Pack Sensors Description/Operation (3) ...... 49
** Cockpit & Cabin Components D/O (3) .......... 55
** Zone & Pack Controller Interfaces (3) ....... 61
Emergency Ram Air Inlet Operation (3) .......... 67
** Pack Components (3) .......................... 71
Pack Sensor Components (3) ...................... 99
** Zone Components (3) ......................... 111
Emergency Ram Air Inlet Components (3) ........ 139
UFD4200
PRESSURIZATION
System Design Philosophy (1) ................... 143
System Presentation (3) ........................ 147
System Controls and Indicating (1) ............ 153
ECAM Page Presentation (1) ..................... 157
System Warnings (3) ............................. 163
** System Control Interfaces (3)............... 179
** System Monitoring Interfaces (3) ........... 185
Components (3) .................................. 189
Functional Test of MAN Motor (3)............... 197
AVIONICS VENTILATION
System Controls and Indicating (1) ............ 205
** System Warnings (3) ......................... 209
System Description Operation (3)............... 221
** System Interfaces (3) ....................... 231
** Components (3) ............................... 235
FORWARD CARGO COMPARTMENT
VENTILATION/HEATING
System Presentation (1) ........................ 259
System Controls Presentation (3)............... 263
ECAM Page Presentation (1) ..................... 267
** System Warnings (3) ......................... 271
** Components (3) ............................... 273
AFT CARGO COMPARTMENT VENTILATION/HEATING
System Presentation (1) ........................ 289
System Controls Presentation (3)............... 293
ECAM Page Presentation (1) ..................... 297
** System Warnings (3) ......................... 301
** Components (3) ............................... 303
MAINTENANCE PRACTICES
SPECIFIC PAGES
** CFDS Specific Page Presentation (3) ...... 319
GENERAL VENTILATION
System Design Philosophy (1) ................... 201
01-04-2010
Page 3
21 AIR CONDITIONING
21 AIR CONDITIONING
UFD4200
TABLE OF CONTENTS
Page
UFD4200
01-04-2010
Page 4
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-00-00 GENERAL SYSTEM PRESENTATION
TMUAIR604 LEVEL 1
UFD4200
CONTENTS:
Introduction
Presentation
01-04-2010
Page 5
21 AIR CONDITIONING
TMUAIR604-T01 LEVEL 1
UFD4200
01-04-2010
Page 6
TMUAIR604-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 7
21 AIR CONDITIONING
TMUAIR604-T02 LEVEL 1
UFD4200
01-04-2010
Page 8
TMUAIR604-P02 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 9
21 AIR CONDITIONING
TMUAIR604 LEVEL 1
UFD4200
01-04-2010
Page 10
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-00-00 GENERAL SYSTEM CONTROLS AND INDICATING
TMUAIR80B LEVEL 1
UFD4200
CONTENTS:
Overhead Panel
Main Instrument Panel
01-04-2010
Page 11
21 AIR CONDITIONING
TMUAIR80B-T01 LEVEL 1
UFD4200
01-04-2010
Page 12
TMUAIR80B-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 13
21 AIR CONDITIONING
TMUAIR80B-T02 LEVEL 1
UFD4200
01-04-2010
Page 14
TMUAIR80B-P02 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 15
21 AIR CONDITIONING
TMUAIR80B LEVEL 1
UFD4200
01-04-2010
Page 16
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-60-00 ZONE TEMPERATURE CONTROL SYSTEM PRESENTATION
TMUAIR109 LEVEL 1
UFD4200
CONTENTS:
Basic Principle
Pack Units
Mixer Unit
Hot Air Pressure Regulating Valve (PRV)
Hot Trim Air
Air Distribution
Lavatory And Galley Ventilation
Temperature Regulation
Pack Controllers
Zone Controller
Self Examination
01-04-2010
Page 17
21 AIR CONDITIONING
TMUAIR109-T01 LEVEL 1
UFD4200
PACK UNITS
MIXER UNIT
01-04-2010
Page 18
TMUAIR109-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 19
21 AIR CONDITIONING
TMUAIR109-T02 LEVEL 1
UFD4200
ZONE CONTROLLER
The zone controller generates signals to the pack
controller for basic temperature regulation and flow
control optimization.
It optimizes the temperature regulation by means of
trim air valves to obtain the selected ambient
temperature in the related zone.
The lowest zone temperature demand is used by the Zone
Controller for basic temperature regulation to achieve
the required outlet temperature of both packs.
01-04-2010
Page 20
21 AIR CONDITIONING
TMUAIR109 LEVEL 1
UFD4200
01-04-2010
Page 22
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-50-00
TMUAIR20A LEVEL 1
UFD4200
CONTENTS:
Pack Flow Control Valve
Exchangers - Compressor
Turbine
Anti-Ice Valve
RAM Air Inlet Flap and ByPass Valve
Self Examination
01-04-2010
Page 23
21 AIR CONDITIONING
TURBINE
TMUAIR20A-T01 LEVEL 1
UFD4200
EXCHANGERS - COMPRESSOR
Bleed air is ducted to the primary heat exchanger,
then to the compressor.
The air is cooled in the main heat exchanger. Then it
passes through the reheater, the condenser and the
water extractor in order to remove water particles
from the turbine air.
01-04-2010
ANTI-ICE VALVE
The pack controller controls the anti-ice valve to
pneumatically open in order to stop ice formation
across the pack condenser.
In case of complete pack controller failure, the
anti-ice valve is signalled to pneumatically control
the pack outlet temperature (to the mixer unit) to
15C(59F).
RAM AIR INLET FLAP AND BYPASS VALVE
The ByPass Valve and the RAM air inlet flap are
simultaneously controlled by the pack controller.
The ByPass Valve is electrically controlled to modulate
the pack discharge temperature by adding hot air.
The RAM air inlet flap modulates the air flow through
the exchangers.
- To increase cooling, the RAM air inlet flap
opens more and the ByPass Valve closes more.
- To increase heating, the RAM air inlet flap
closes more and the ByPass Valve opens more.
During take-off and landing, the RAM air Inlet flap
is fully closed to prevent ingestion of foreign
objects.
Page 24
TMUAIR20A-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 25
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-60-00 ZONE TEMPERATURE CONTROL SYSTEM CONTROLS PRESENTATION
TMUAIR30A LEVEL 1
UFD4200
CONTENTS:
Pack Flow Control Valve Pushbutton
Pack Flow Selector
Hot Air Valve Pushbutton
Temperature Selectors
Ram Air Pushbutton
Fan Pushbutton
Self Examination
01-04-2010
Page 27
21 AIR CONDITIONING
TMUAIR30A-T01 LEVEL 1
UFD4200
01-04-2010
Page 28
TMUAIR30A-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 29
21 AIR CONDITIONING
TMUAIR30A-T01 LEVEL 1
UFD4200
FAN PUSHBUTTON
When the CAB FANS pushbutton is pressed in, the cabin
recirculation fans run. When set to OFF, the fans stop.
01-04-2010
Page 30
21 AIR CONDITIONING
TMUAIR30A LEVEL 1
UFD4200
01-04-2010
Page 32
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-60-00 ZONE TEMPERATURE CONTROL SYSTEM CONTROLS PRESENTATION
TMUAIR30B LEVEL 1
UFD4200
CONTENTS:
Pack Flow Control Valve Pushbutton
ECON FLOW Pushbutton
Hot Air Valve Pushbutton
Temperature Selectors
Ram Air Pushbutton
Fan Pushbutton
Self Examination
01-04-2010
Page 33
21 AIR CONDITIONING
When the hot air pushbutton is pressed in, the hot air
Pressure Regulating Valve opens and pneumatically
regulates hot air pressure above the cabin pressure.
When set to OFF, the valve closes electrically as well
as the Trim Air Valves.
Without air pressure, the hot air pressure regulating
valve is spring loaded closed.
In case of duct temperature above 88C(190.40F), it
is automatically electrically closed.
When it is electrically closed, the cockpit FWD and
AFT Trim Air Valves are also closed.
TMUAIR30B-T01 LEVEL 1
UFD4200
01-04-2010
TEMPERATURE SELECTORS
The COCKPIT, FWD CABIN, AFT CABIN selectors enable the
selection of the desired ambient temperature in the
corresponding zone.
The zone controller takes into account the Mixer Unit
temperature (recircultated air influence) to generate
a Pack temperature demand to satisfy the lowest
selected zone temperature. It also controls Trim Air
Valves to add hot air for other zone fine temperature
adjustment.
Page 34
TMUAIR30B-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 35
21 AIR CONDITIONING
TMUAIR30B-T01 LEVEL 1
UFD4200
01-04-2010
Page 36
21 AIR CONDITIONING
TMUAIR30B LEVEL 1
UFD4200
01-04-2010
Page 38
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-60-00 ZONE TEMPERATURE CONTROL ECAM PAGES PRESENTATION
TMUAIR508 LEVEL 1
UFD4200
CONTENTS:
Pack Flow Control Valve
Pack Flow Indication
Pack Compressor Outlet Temperature
Turbine Bypass Valve Position
Pack Outlet Temperature
Emergency Ram Air Inlet Flap Position
Duct Supply
Hot Air Pressure Regulating Valve
Zone Controller Fault Indication
Cabin Fan Fault Indication
Trim Air Valves Position
Zone Duct Temperature
Zone Temperature
Temperature Unit
01-04-2010
Page 39
21 AIR CONDITIONING
DUCT SUPPLY
TMUAIR508-T01 LEVEL 1
UFD4200
01-04-2010
Page 40
TMUAIR508-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 41
21 AIR CONDITIONING
TMUAIR508-T02 LEVEL 1
UFD4200
01-04-2010
Page 42
TMUAIR508-P02 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 43
21 AIR CONDITIONING
TMUAIR508 LEVEL 1
UFD4200
01-04-2010
Page 44
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-60-00 ZONE TEMPERATURE CONTROL SYSTEM WARNINGS
TMUAIR401 LEVEL 3
UFD4200
CONTENTS:
Pack 1 (or 2) Overheat
Pack 1 (or 2) Fault
Pack 1 (or 2) Off
Pack 1 (or 2) Regulation Fault
Pack 1 + 2 Fault
Cockpit (or FWD Cabin or AFT Cabin) Duct Overheat
Hot Air Fault
Trim Air Sys Fault (Trim Air Valve Fault)
Zone Regulation Fault
Left + Right Cabin Fan Fault
Lavatory + Galley Fan Fault
Trim Air Sys Fault (Trim Air Sys Overpressure)
01-04-2010
Page 45
TMUAIR401-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 46
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-50-00 ZONE TEMPERATURE CONTROL FLOW CONTROL & PACK COMPONENTS
D/O
TMUTEMD0A LEVEL 2
UFD4200
CONTENTS:
Ozone Filter (Option)
Flow Sensor - Flow Control Valve
ByPass Valve (BPV)
Ram Air Inlet Flap
Anti-ice Valve (AIV)
Air Cycle Machine (ACM)
Exchangers - Reheater - Condenser
Water Extractor
Check valve
Self Examination
01-04-2010
Page 47
21 AIR CONDITIONING
TMUTEMD0A-T01 LEVEL 2
UFD4200
01-04-2010
Page 48
TMUTEMD0A-P01 LEVEL 2
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 49
21 AIR CONDITIONING
TMUTEMD0A-T02 LEVEL 2
UFD4200
01-04-2010
Page 50
21 AIR CONDITIONING
TMUTEMD0A LEVEL 2
UFD4200
01-04-2010
Page 52
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-60-00 ZONE TEMPERATURE CONTROL PACK SENSORS D/O
TMUTEML09 LEVEL 3
UFD4200
CONTENTS:
Pack Inlet Pressure Sensor
Flow Sensor
Compressor Temperature Sensor
Compressor Pneumatic Overheat Sensor
Compressor Overheat Sensor
Water Extractor Temperature Sensor
Pack Outlet Pneumatic Sensor
Pack Outlet Temperature Sensor
Self Examination
01-04-2010
Page 53
21 AIR CONDITIONING
TMUTEML09-T01 LEVEL 3
UFD4200
FLOW SENSOR
A flow sensor measures a differential pressure at the
Flow Control Valve inlet.
This P, which is equivalent to the airflow, is
converted into an electrical signal and sent to the
secondary computer of the pack controller.
It is used for ECAM display and FCV control.
01-04-2010
Page 54
TMUTEML09-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 55
21 AIR CONDITIONING
TMUTEML09-T01 LEVEL 3
UFD4200
01-04-2010
Page 56
21 AIR CONDITIONING
TMUTEML09 LEVEL 3
UFD4200
01-04-2010
Page 58
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-60-00 ZONE TEMPERATURE CONTROL COCKPIT & CABIN COMPONENTS D/O
TMUTEMG09 LEVEL 3
UFD4200
CONTENTS:
Mixer Unit
Mixer Unit Temperature Sensors
Mixer Unit Flap
Trim Air Pressure Regulating Valve (PRV)
Hot Air Pressure Switch
Trim Air Valves (TAV)
Duct Temperature Sensors
Zone Temperature Sensors
Self Examination
01-04-2010
Page 59
21 AIR CONDITIONING
TMUTEMG09-T01 LEVEL 3
UFD4200
01-04-2010
Page 60
TMUTEMG09-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 61
21 AIR CONDITIONING
TMUTEMG09-T01 LEVEL 3
UFD4200
01-04-2010
Page 62
21 AIR CONDITIONING
TMUTEMG09 LEVEL 3
UFD4200
01-04-2010
Page 64
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-60-00 ZONE TEMPERATURE CONTROL ZONE AND PACK CONTROLLER
INTERFACES
TMUTEMI09 LEVEL 3
UFD4200
CONTENTS:
General
System Data Acquisition Concentrator (SDAC)
Engine Interface Unit (EIU)
Air Data Inertial Reference Unit 1 (ADIRU 1)
Electronic Control Box (ECB)
Data Management Unit (DMU)
Centralized Fault Display Interface Unit (CFDIU)
Zone And Pack Controllers
Fans Parameters
Anti-ice And Pneumatic Parameters
Landing Gear Control Interface Unit 2 (LGCIU 2)
Braking And Steering Control Unit (BSCU)
Self Examination
01-04-2010
Page 65
21 AIR CONDITIONING
TMUTEMI09-T01 LEVEL 3
UFD4200
01-04-2010
Page 66
TMUTEMI09-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 67
21 AIR CONDITIONING
TMUTEMI09-T01 LEVEL 3
UFD4200
FANS PARAMETERS
The zone controller receives discrete signals from
recirculation and toilet fans for monitoring.
Signal: recirculation, toilet and galley and AFT cargo
ventilation fans operation, used for monitoring for
transmission to SDACs and CFDIU.
01-04-2010
Page 68
21 AIR CONDITIONING
SELF EXAMINATION
The pack controllers send to the zone controller:
A - The flow demand signal.
B - The BITE demand signal.
C - BITE information and pack status signals.
TMUTEMI09 LEVEL 3
UFD4200
01-04-2010
Page 69
21 AIR CONDITIONING
TMUTEMI09 LEVEL 3
UFD4200
01-04-2010
Page 70
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-55-00 ZONE TEMPERATURE CONTROL EMERGENCY RAM AIR INLET OPERATION
TMUTEMF02 LEVEL 3
UFD4200
CONTENTS:
General
Emergency Ram Air Inlet Flap Operation
01-04-2010
Page 71
21 AIR CONDITIONING
TMUTEMF02-T01 LEVEL 3
UFD4200
01-04-2010
Page 72
TMUTEMF02-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 73
21 AIR CONDITIONING
TMUTEMF02 LEVEL 3
UFD4200
01-04-2010
Page 74
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-50-00 ZONE TEMPERATURE CONTROL PACK COMPONENTS
TMUTEMN0A LEVEL 3
UFD4200
CONTENTS:
Pack Controllers
Air Conditioning Packs
Flow Control Valve (FCV)
Flow Control Valve Removal/Installation
ByPass Valve (BPV)
Ram Air Inlet (RAI) Actuator
Anti-Ice Valve (AIV)
Pack Downstream Check Valve
Air Cycle Machine (ACM)
Primary Heat Exchanger
Main Heat Exchanger
Reheater
Condenser
Water Extractor
Water Injector
Ozone Filter (Option)
01-04-2010
Page 75
21 AIR CONDITIONING
PRIMARY
yes
no
yes
yes
yes
yes
yes
yes
no
yes
no
yes
yes
yes
yes
no
yes
yes
no
yes
yes
yes
TMUTEMN0A-T01 LEVEL 3
UFD4200
SECONDARY
01-04-2010
Page 76
TMUTEMN0A-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 77
21 AIR CONDITIONING
TMUTEMN0A-T02 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The air conditioning packs are identified as PACK 1
and PACK 2 depending on the pneumatic manifold to which
they are connected.
01-04-2010
Page 78
TMUTEMN0A-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 79
21 AIR CONDITIONING
TMUTEMN0A-T03 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The flow control valves have two functions in the air
conditioning system. Their primary function is to
control the amount of air flowing through the system.
The secondary function is to provide an automatic or
manually selectable shut-off function.
01-04-2010
Page 80
TMUTEMN0A-P03 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 81
21 AIR CONDITIONING
TMUTEMN0A-T04 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The Flow Control Valve is connected via V-clamps to
the bleed air duct on one side and the heat exchanger
duct on the other side.
01-04-2010
Page 82
TMUTEMN0A-P04 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 83
21 AIR CONDITIONING
TMUTEMN0A-T05 LEVEL 3
UFD4200
01-04-2010
Page 84
TMUTEMN0A-P05 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 85
21 AIR CONDITIONING
TMUTEMN0A-T06 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The ram air inlet actuator has:
- an AC motor, electrically supplied by the pack
controller (two different motor suppliers),
- two limit switches (one for the closed
position, the other for the 70% open position).
These send signals to the secondary computer,
- two potentiometers (one for control through
the primary computer, the other for
indication through the secondary computer).
01-04-2010
Page 86
TMUTEMN0A-P06 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
ZONE TEMPERATURE CONTROL - PACK COMPONENTS - RAM AIR INLET (RAI) ACTUATOR
Page 87
21 AIR CONDITIONING
TMUTEMN0A-T07 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The Anti-Ice Valve is electrically controlled and
pneumatically operated.
Anti-ice mode: valve energized.
The valve opens if ice is detected across the high or
low pressure side of the condenser.
Pneumatic
temperature
control
mode:
valve
de-energized.
The valve is controlled by a pneumatic sensor to get
a fixed temperature (15C or 59F).
01-04-2010
Page 88
TMUTEMN0A-P07 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 89
21 AIR CONDITIONING
TMUTEMN0A-T08 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The pack downstream check valve is of the single spring
loaded flap type, directly bolted to the pressure
bulkhead. It stops leakage of air if the pack is
switched off.
01-04-2010
Page 90
TMUTEMN0A-P08 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 91
21 AIR CONDITIONING
TMUTEMN0A-T09 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The main component of the air-cycle machine is a
rotating shaft. A turbine, a compressor and a fan are
mounted along this shaft. The shaft rotates on two
self-acting foil-air-bearings. A double self-acting
air-thrust bearing takes the axial thrust loads.
01-04-2010
Page 92
TMUTEMN0A-P09 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 93
21 AIR CONDITIONING
IDENTIFICATION
FIN: 10HM6, 11HM6
IDENTIFICATION
FIN: 10HM7, 11HM7
LOCATION
ZONE: 191, 192
LOCATION
ZONE: 191, 192
COMPONENT DESCRIPTION
The primary heat exchanger is of the plate and fin
type with a single-pass crossflow configuration. It
cools the hot bleed air before it enters the
air-cycle-machine compressor. The cooling agent is
ambiant RAM air.
COMPONENT DESCRIPTION
The main heat exchanger is of the plate and fin type
with a counterflow configuration. It is installed
between the air-cycle-machine compressor and turbine.
The cooling agent is ambiant air.
TMUTEMN0A-T10 LEVEL 3
UFD4200
01-04-2010
Page 94
TMUTEMN0A-P10 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 95
21 AIR CONDITIONING
REHEATER
CONDENSER
IDENTIFICATION
FIN: 10HM3, 11HM3
IDENTIFICATION
FIN: 10HM2, 11HM2
LOCATION
ZONE: 191, 192
LOCATION
ZONE: 191, 192
COMPONENT DESCRIPTION
The reheater is of the plate and fin type with a single
crossflow configuration. It uses turbine inlet air to
further cool air leaving the main heat exchanger.
COMPONENT DESCRIPTION
The condenser is of the tube type with a single pass
crossflow configuration. It cools air leaving the
reheater below its dew point. This causes the moisture
in the air to condense into droplets. Water is then
removed by the water extractor.
TMUTEMN0A-T11 LEVEL 3
UFD4200
01-04-2010
Page 96
TMUTEMN0A-P11 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 97
21 AIR CONDITIONING
WATER EXTRACTOR
WATER INJECTOR
IDENTIFICATION
FIN: 10HM8, 11HM8
IDENTIFICATION
FIN: 20HM, 21HM
LOCATION
ZONE: 191, 192
LOCATION
ZONE: 191, 192
COMPONENT DESCRIPTION
Swirl vanes centrifuge the water droplets onto the
inner surface of the water extractor body. The water
is then drained to the water injectors.
COMPONENT DESCRIPTION
The water injectors are installed in the RAM air inlet
duct, upstream of the heat exchangers. The water from
the extractors is delivered under pressure into the
RAM airflow to increase the cooling capacity.
TMUTEMN0A-T12 LEVEL 3
UFD4200
01-04-2010
Page 98
TMUTEMN0A-P12 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 99
21 AIR CONDITIONING
TMUTEMN0A-T13 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The ozone filters (optional) are installed upstream
of the Flow Control Valves.
01-04-2010
Page 100
TMUTEMN0A-P13 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 101
21 AIR CONDITIONING
TMUTEMN0A LEVEL 3
UFD4200
01-04-2010
Page 102
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-50-00 ZONE TEMPERATURE CONTROL PACK SENSOR COMPONENTS
TMUTEMR09 LEVEL 3
UFD4200
CONTENTS:
Flow Sensor
Pack Inlet Pressure Sensor
Compressor Overheat Pneumatic Sensor
Compressor Temperature Sensor
Compressor Overheat Sensor
Pack Outlet Temperature Sensor
Water Extractor Temperature Sensor
Pack Outlet Pneumatic Sensor
01-04-2010
Page 103
21 AIR CONDITIONING
TMUTEMR09-T01 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
It measures a differential pressure which is equivalent
to the airflow through the valve.
The P is converted into an electrical signal, which
is sent to the pack controller.
01-04-2010
Page 104
TMUTEMR09-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 105
21 AIR CONDITIONING
IDENTIFICATION
FIN: 16HH, 36HH
IDENTIFICATION
FIN: 10HM9, 11HM9
LOCATION
ZONE: 191, 192
LOCATION
ZONE: 191, 192
COMPONENT DESCRIPTION
It signals pressure to the primary computer. If the
pressure is too low, the bypass valve is controlled
to a more open position to decrease the delta P of the
pack.
COMPONENT DESCRIPTION
Pneumatically connected to the flow control valve to
close it in case of overheat detection.
(It vents the FCV muscle pressure).
TMUTEMR09-T02 LEVEL 3
UFD4200
01-04-2010
Page 106
TMUTEMR09-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
ZONE TEMPERATURE CONTROL - PACK SENSOR COMPONENTS - PACK INLET PRESSURE SENSOR COMPRESSOR OVERHEAT PNEUMATIC SENSOR
Page 107
21 AIR CONDITIONING
IDENTIFICATION
FIN: 12HH, 32HH
IDENTIFICATION
FIN: 15HH, 35HH
LOCATION
ZONE: 191, 192
LOCATION
ZONE: 191, 192
COMPONENT DESCRIPTION
The compressor temperature sensor is used for pack
temperature control functions and pack overheat
detection.
It is connected to the pack controller primary
computer.
COMPONENT DESCRIPTION
It is connected to the pack controller secondary
computer for overheat detection.
The sensor also provides compressor outlet temperature
on ECAM.
TMUTEMR09-T03 LEVEL 3
UFD4200
01-04-2010
Page 108
TMUTEMR09-P03 LEVEL 3
UFD4200
21 AIR CONDITIONING
ZONE TEMPERATURE CONTROL - PACK SENSOR COMPONENTS - COMPRESSOR TEMPERATURE SENSOR COMPRESSOR OVERHEAT SENSOR
01-04-2010
Page 109
21 AIR CONDITIONING
IDENTIFICATION
FIN: 13HH, 34HH
IDENTIFICATION
FIN: 11HH, 31HH
LOCATION
ZONE: 191, 192
LOCATION
ZONE: 191, 192
COMPONENT DESCRIPTION
It provides Indication for ECAM display and also
detects pack overheat if the Air Cycle Machine fails
or when the pack is off and a trim air check valve
fails.
COMPONENT DESCRIPTION
It consists of two thermistors and is used for pack
temperature control.
One thermistor is connected to the primary computer,
the other thermistor to the secondary one.
TMUTEMR09-T04 LEVEL 3
UFD4200
01-04-2010
Page 110
TMUTEMR09-P04 LEVEL 3
UFD4200
21 AIR CONDITIONING
ZONE TEMPERATURE CONTROL - PACK SENSOR COMPONENTS - PACK OUTLET TEMPERATURE SENSOR WATER EXTRACTOR TEMPERATURE SENSOR
01-04-2010
Page 111
21 AIR CONDITIONING
TMUTEMR09-T05 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
It is pneumatically connected to the anti-ice valve
for pack temperature control in case of pack controller
failure (It adjusts the AIV muscle pressure).
01-04-2010
Page 112
TMUTEMR09-P05 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
ZONE TEMPERATURE CONTROL - PACK SENSOR COMPONENTS - PACK OUTLET PNEUMATIC SENSOR
Page 113
21 AIR CONDITIONING
TMUTEMR09 LEVEL 3
UFD4200
01-04-2010
Page 114
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-60-00 ZONE TEMPERATURE CONTROL ZONE COMPONENTS
TMUTEMS0A LEVEL 3
UFD4200
CONTENTS:
Zone Controller
Mixer Unit Flap Rotary Actuator
Mixer Temperature Sensors
Trim Air Check Valve
Trim Air Pressure Regulating Valve (PRV)
Hot Air Pressure Switch
Trim Air Valve (TAV)
Duct Temperature Sensors
Zone Temperature Sensors
Recirculation Filters
Recirculation Fan
Recirculation Check Valves
Toilet And Galley Extraction Fan
01-04-2010
Page 115
21 AIR CONDITIONING
TMUTEMS0A-T01 LEVEL 3
UFD4200
LOCATION
ZONE: 121
COMPONENT DESCRIPTION
ZONE CONTROLLER FUNCTIONS
Zone temp control to selected
temp
Zone temp. to 24C (75F)
TAV control
PRV opening
PRV closing
Flow demand optimization
Failure analysis
BITE
BITE storage and transmission
to CFDS
ECAM indications
DATA handling
Ovht detection and indication
ATA 36 bleed valve status
ATA 30 anti-ice failures and
status
Fan monitoring
01-04-2010
PRIMARY
SECONDARY
yes
no
yes
yes
yes
yes
yes
yes
no
yes
no
no
yes
no
yes
yes
no
yes
yes
yes
no
yes
yes
yes
yes
yes
no
yes
yes
no
Page 116
TMUTEMS0A-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 117
21 AIR CONDITIONING
TMUTEMS0A-T02 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
Operated by a 28 VDC motor
Mixer unit flap normally closed.
It opens when Pack 1 is selected OFF to ensure
sufficient airflow to the cockpit.
01-04-2010
Page 118
TMUTEMS0A-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
ZONE TEMPERATURE CONTROL - ZONE COMPONENTS - MIXER UNIT FLAP ROTARY ACTUATOR
Page 119
21 AIR CONDITIONING
TMUTEMS0A-T03 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
There are two mixer temperature sensors one installed
on each side of the mixer unit. They send data to the
zone controller.
01-04-2010
Page 120
TMUTEMS0A-P03 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 121
21 AIR CONDITIONING
TMUTEMS0A-T04 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
They are installed upstream of the hot pressure
regulating valve. One is installed in each trim air
duct from the bleed system. They prevent back-flow.
01-04-2010
Page 122
TMUTEMS0A-P04 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 123
21 AIR CONDITIONING
TMUTEMS0A-T05 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
Electrically controlled and pneumatically actuated.
One microswitch for indication (ECAM and FAULT light).
Two solenoids:
- one for control: energized = valve open,
- one for reduced airflow: energized = press
reduction.
01-04-2010
Page 124
TMUTEMS0A-P05 LEVEL 3
UFD4200
21 AIR CONDITIONING
ZONE TEMPERATURE CONTROL - ZONE COMPONENTS - TRIM AIR PRESSURE REGULATING VALVE (PRV)
01-04-2010
Page 125
21 AIR CONDITIONING
TMUTEMS0A-T06 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
It signals pressure regulating valve outlet
overpressure of 6.5 psi (0.45 bar) for ECAM display.
01-04-2010
Page 126
TMUTEMS0A-P06 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 127
21 AIR CONDITIONING
TMUTEMS0A-T07 LEVEL 3
UFD4200
01-04-2010
Page 128
TMUTEMS0A-P07 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 129
21 AIR CONDITIONING
TMUTEMS0A-T08 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
They send temperature data to the zone controller for
temperature control indication and overheat detection.
Each sensor has two thermistors, one dedicated to the
main computer of the zone controller, the other
dedicated to the secondary computer.
01-04-2010
Page 130
TMUTEMS0A-P08 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 131
21 AIR CONDITIONING
TMUTEMS0A-T09 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
There are three zone-temperature-sensors one installed
in the cockpit, FWD cabin and aft cabin zones, each
is used for control and indication.
01-04-2010
Page 132
TMUTEMS0A-P09 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 133
21 AIR CONDITIONING
TMUTEMS0A-T10 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
One recirculation filter is installed upstream of each
recirculation fan. Each filter consists of multi-layer
glassfiber filter cartridge, installed inside a
perforated carbon-filter reinforced plastic cylinder.
01-04-2010
Page 134
TMUTEMS0A-P10 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 135
21 AIR CONDITIONING
TMUTEMS0A-T11 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
They are installed in line with the recirculation
ducts. AC powered with 3 phases. A thermal switch
isolates the electrical supply in case of stator temp
of 140C (284F). A relay signals malfunction to the
ECAM and CFDS via the zone controller.
01-04-2010
Page 136
TMUTEMS0A-P11 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 137
21 AIR CONDITIONING
TMUTEMS0A-T12 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
They are installed downstream of each cabin
recirculation fan. They prevent back flow to the FWD
cargo compartment if case of fan failure.
01-04-2010
Page 138
TMUTEMS0A-P12 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 139
21 AIR CONDITIONING
TMUTEMS0A-T13 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The fan (AC powered with 3 phases) extracts toilet and
galley air to the outflow valve area. A thermal switch
isolates the electrical supply in case of stator
temperature of 134C (273F) A relay signals malfunction
to the ECAM and CFDS via the zone controller.
01-04-2010
Page 140
TMUTEMS0A-P13 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
ZONE TEMPERATURE CONTROL - ZONE COMPONENTS - TOILET AND GALLEY EXTRACTION FAN
Page 141
21 AIR CONDITIONING
TMUTEMS0A LEVEL 3
UFD4200
01-04-2010
Page 142
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-55-00 ZONE TEMPERATURE CONTROL EMERGENCY RAM AIR INLET
COMPONENTS
TMUTEMQ01 LEVEL 1
UFD4200
CONTENTS:
Emergency Ram Air Inlet Actuator
Emergency Check Valve
01-04-2010
Page 143
21 AIR CONDITIONING
TMUTEMQ01-T01 LEVEL 1
UFD4200
COMPONENT DESCRIPTION
The check valve is installed in line with the air
delivery duct, between the ram air inlet and the mixer
unit. It prevents mixer unit back flow.
01-04-2010
Page 144
TMUTEMQ01-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 145
21 AIR CONDITIONING
TMUTEMQ01 LEVEL 1
UFD4200
01-04-2010
Page 146
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-31-00 PRESSURIZATION SYSTEM DESIGN PHILOSOPHY
TMUPRE702 LEVEL 1
UFD4200
CONTENTS:
General
Design Philosophy
Self Examination
01-04-2010
Page 147
21 AIR CONDITIONING
TMUPRE702-T01 LEVEL 1
UFD4200
DESIGN PHILOSOPHY
The system has two identical and independent automatic
controllers.
Only one controller operates at a time, the other is
in active stand-by.
In normal condition, the system operation is fully
automatic.
The automatic cabin pressure control operation is
dependent
on
programmed
control
laws
and
information from FMGCs and ADIRUs.
Manual mode permits full pressurization control in
case of failure of both automatic systems.
The cabin altitude can be manually controlled by
operating the outflow valve in manual mode.
Two safety valves are installed on the aft pressure
bulkhead to prevent excessive positive and negative
differential pressure.
The two safety valves are installed above the aircraft
floatation line.
01-04-2010
Page 148
TMUPRE702-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 149
21 AIR CONDITIONING
SELF EXAMINATION
What is the number of
valves ?
A - One outflow
B - One outflow
C - Two outflow
TMUPRE702 LEVEL 1
UFD4200
What is
A
B
C
01-04-2010
Page 150
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-31-00 PRESSURIZATION SYSTEM PRESENTATION
TMUPRE80A LEVEL 1
UFD4200
CONTENTS:
Cabin Pressure Controllers
Outflow Valve
Safety Valves
Cabin Pressure Altitude Enveloppe
Self Examination
01-04-2010
Page 151
21 AIR CONDITIONING
TMUPRE80A-T01 LEVEL 1
UFD4200
SAFETY VALVES
01-04-2010
Page 152
TMUPRE80A-P01 LEVEL 1
UFD4200
21 AIR CONDITIONING
PRESSURIZATION - SYSTEM PRESENTATION - CABIN PRESSURE CONTROLLERS - OUTFLOW VALVE SAFETY VALVES
01-04-2010
Page 153
21 AIR CONDITIONING
TMUPRE80A-T02 LEVEL 1
UFD4200
01-04-2010
Page 154
TMUPRE80A-P02 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 155
21 AIR CONDITIONING
SELF EXAMINATION
Which motor(s) is(are) controlled from the cabin
pressure panel ?
A - Motor 3.
B - Motor 2 and motor 1.
C - Motor 1.
the maximum normal cabin altitude for
cruise level (39000 ft) ?
- A cabin altitude of 8000 ft.
- A cabin altitude of 9550 ft.
- A cabin altitude of 11300 ft.
TMUPRE80A LEVEL 1
UFD4200
What is
maximum
A
B
C
01-04-2010
Page 156
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-31-00 PRESSURIZATION SYSTEM CONTROLS AND INDICATING
TMUPRE40A LEVEL 1
UFD4200
CONTENTS:
Landing Elevation Selector
Control MODE SEL Pushbutton And MAN V/S Toggle SW
Ditching Pushbutton
Self Examination
01-04-2010
Page 157
21 AIR CONDITIONING
TMUPRE40A-T01 LEVEL 1
UFD4200
01-04-2010
Page 158
TMUPRE40A-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 159
21 AIR CONDITIONING
SELF EXAMINATION
Where do you check the correct Manual landing
elevation setting ?
A - On the scale of LDG ELEV switch
selector.
B - On the ECAM CAB PRESS page.
C - No need because it is automatic.
TMUPRE40A LEVEL 1
UFD4200
01-04-2010
Page 160
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-31-00 PRESSURIZATION ECAM PAGE PRESENTATION
TMUPRE503 LEVEL 1
UFD4200
CONTENTS:
Outflow Valve
Safety Valves
System: SYS 1 Or SYS 2
Cabin Differential Pressure
Cabin Vertical Speed (V/S)
Manual Mode (MAN)
Cabin Altitude (CAB ALT)
Landing Elevation
01-04-2010
Page 161
21 AIR CONDITIONING
SAFETY VALVES
The safety valve position is displayed in green when
the two safety valves are closed. It becomes amber if
either safety valve is not closed.
SYSTEM: SYS 1 OR SYS 2
SYS 1 or SYS
- green
- amber
- It is
2 indication is displayed in :
when active
when faulty
not displayed when inactive.
TMUPRE503-T01 LEVEL 1
UFD4200
01-04-2010
Page 162
TMUPRE503-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 163
21 AIR CONDITIONING
TMUPRE503-T02 LEVEL 1
UFD4200
01-04-2010
Page 164
TMUPRE503-P02 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 165
21 AIR CONDITIONING
TMUPRE503 LEVEL 1
UFD4200
01-04-2010
Page 166
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-31-00 PRESSURIZATION SYSTEM WARNINGS
TMUPRE604 LEVEL 3
UFD4200
CONTENTS:
Excessive Cabin Altitude
System 1 (or 2) Fault
System 1 and 2 Fault
Outflow Valve Not open
Landing Elevation Fault
Safety Valve Open
Low Differential Pressure
01-04-2010
Page 167
21 AIR CONDITIONING
TMUPRE604-T01 LEVEL 3
UFD4200
01-04-2010
Page 168
TMUPRE604-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 169
21 AIR CONDITIONING
TMUPRE604-T02 LEVEL 3
UFD4200
01-04-2010
Page 170
TMUPRE604-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 171
21 AIR CONDITIONING
TMUPRE604-T03 LEVEL 3
UFD4200
01-04-2010
Page 172
TMUPRE604-P03 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
FAULT
Page 173
21 AIR CONDITIONING
TMUPRE604-T04 LEVEL 3
UFD4200
01-04-2010
Page 174
TMUPRE604-P04 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 175
21 AIR CONDITIONING
TMUPRE604-T05 LEVEL 3
UFD4200
01-04-2010
Page 176
TMUPRE604-P05 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 177
21 AIR CONDITIONING
TMUPRE604-T06 LEVEL 3
UFD4200
01-04-2010
Page 178
TMUPRE604-P06 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 179
21 AIR CONDITIONING
TMUPRE604-T07 LEVEL 3
UFD4200
01-04-2010
Page 180
TMUPRE604-P07 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 181
21 AIR CONDITIONING
TMUPRE604 LEVEL 3
UFD4200
01-04-2010
Page 182
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-31-00 PRESSURIZATION SYSTEM CONTROL INTERFACES
TMUPREB02 LEVEL 3
UFD4200
CONTENTS:
Engine Interface Unit (EIU)
Landing Gear Control Interface Unit (LGCIU)
Air Data Inertial Reference Unit (ADIRU)
Flight Management And Guidance Computer (FMGC)
Motors
Controller 1/Controller 2
Air Conditioning Panel And Cabin Pressurization Panel
Pressurization Panel/Motor 3
Self Examination
01-04-2010
Page 183
21 AIR CONDITIONING
MOTORS
CONTROLLER 1 / CONTROLLER 2
TMUPREB02-T01 LEVEL 3
UFD4200
01-04-2010
Page 184
TMUPREB02-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 185
21 AIR CONDITIONING
TMUPREB02-T01 LEVEL 3
UFD4200
01-04-2010
Page 186
21 AIR CONDITIONING
TMUPREB02 LEVEL 3
UFD4200
01-04-2010
Page 188
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-31-00 PRESSURIZATION SYSTEM MONITORING INTERFACES
TMUPREC01 LEVEL 3
UFD4200
CONTENTS:
Flight Warning Computer (FWC)
System Data Acquisition Concentrator (SDAC)
Centralized Fault Display Interface Unit (CFDIU)
Cabin Intercommunication Data System (CIDS)
Cabin Pressurization Panel
Cabin Pressurization Panel/SDACs
Safety Valves/SDACs
Self Examination
01-04-2010
Page 189
21 AIR CONDITIONING
TMUPREC01-T01 LEVEL 3
UFD4200
01-04-2010
Page 190
TMUPREC01-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 191
21 AIR CONDITIONING
SELF EXAMINATION
TMUPREC01 LEVEL 3
UFD4200
01-04-2010
Page 192
21 AIR CONDITIONING
21 - PRESSURIZATION
21-31-00 PRESSURIZATION COMPONENTS
TMUPREE0A LEVEL 3
UFD4200
CONTENTS:
Cabin Pressure Controllers (CPC1 and CPC2)
Outflow Valve LRUs
- Valve Assembly
- Electronic Actuators
- Gearbox Assembly
Safety Valves
01-04-2010
Page 193
21 AIR CONDITIONING
PRESSURIZATION - COMPONENTS
CONTROLLER
IDENTIFICATION
FIN: 11HL, 12HL
LOCATION
ZONE: 121, 122
TMUPREE0A-T01 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
CPC1 and CPC2 are interchangeable and provided with
system identification pins.
Each one is equipped with a pressure transducer module
of the DMS pressure sensor type.
01-04-2010
Page 194
TMUPREE0A-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 195
21 AIR CONDITIONING
PRESSURIZATION - COMPONENTS
OUTFLOW VALVE LRUs
IDENTIFICATION
FIN: 10HL
LOCATION
ZONE: 172
TMUPREE0A-T02 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The skin mounted outflow valve is of the dual-gate and
motor driven type design.
It consists of:
- a valve assembly (a frame and two gates),
- two electronic actuators (a single electronic
board connected to its associated CPC via RS422
bus),
- a gearbox assembly (two automatic motors, a
manual motor, a gearbox and feedback
assembly).
VALVE ASSEMBLY
The outflow valve body has two gates, one forward and
one aft. The gates are installed in a rectangular
frame. The forward gate opens outwards and is
mechanically connected to the aft gate. The aft gate
opens inwards and is mechanically connected to the
gear box and the forward gate.
01-04-2010
ELECTRONIC ACTUATORS
The electronic actuator modules receive a position
reference signal (desired outflow valve position) from
the controller. This signal is compared with the
outflow valve actual position. The electronic module
then drives the outflow valve until its position
matches the desired one.
A pressure switch is installed in each box. It operates
independently from the automatic operation. It closes
the outflow valve if the pressure in the fuselage is
less than the atmospheric pressure at an altitude of
15000 ft.
GEARBOX AND FEEDBACK ASSEMBLY
The gearbox transmits the movement from the activated
motor to the outflow valve flap. A mechanical stop
limits the rotation of the drive shaft for the valve
flap movement. The feedback module is a triple
potentiometer integrated with the gearbox. It sends
data to the cabin pressure controllers.
There are two brushless DC motors for automatic
control. Each motor has an integral electromechanical
brake. The manual motor is a brush-type DC motor. It
drives the outflow valve through an irreversible
worm-gear.
Page 196
TMUPREE0A-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 197
21 AIR CONDITIONING
PRESSURIZATION - COMPONENTS
SAFETY VALVES
IDENTIFICATION
FIN: 6HL, 7HL
LOCATION
ZONE: 262
TMUPREE0A-T03 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The safety valve is of the diaphragm pneumatic valve
type and consists of:
- a body, a filter, a moving valve element
(diaphragm).
- a pneumatic pressure controller sensing cabin
and outside pressures
- a position switch for ECAM indication.
Opening: when P = 8.6 or - 0.5 psi.
01-04-2010
Page 198
TMUPREE0A-P03 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 199
21 AIR CONDITIONING
TMUPREE0A LEVEL 3
UFD4200
01-04-2010
Page 200
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-31-00 PRESSURIZATION FUNCTIONAL TEST OF MAN MOTOR
TMUPREH01 LEVEL 3
UFD4200
CONTENTS:
Aircraft configuration
Procedure
01-04-2010
Page 201
21 AIR CONDITIONING
TMUPREH01-T01 LEVEL 3
UFD4200
01-04-2010
Page 202
TMUPREH01-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 203
21 AIR CONDITIONING
TMUPREH01 LEVEL 3
UFD4200
01-04-2010
Page 204
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-20-00 GENERAL VENTILATION SYSTEM DESIGN PHILOSOPHY
TMUVEN301 LEVEL 1
UFD4200
CONTENTS:
Avionics
Lav & Galleys
Cargo (Option)
Controllers
01-04-2010
Page 205
21 AIR CONDITIONING
TMUVEN301-T01 LEVEL 1
UFD4200
01-04-2010
Page 206
TMUVEN301-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 207
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-26-00 AVIONICS VENTILATION SYSTEM CONTROLS AND INDICATING
TMUVEN903 LEVEL 1
UFD4200
CONTENTS:
Blower Pushbutton
Extract Pushbutton
Skin Air Inlet Valve
Vent Indication
Skin Air Outlet Valve (extract Valve)
01-04-2010
Page 209
21 AIR CONDITIONING
TMUVEN903-T01 LEVEL 1
UFD4200
01-04-2010
EXTRACT PUSHBUTTON
In case of system malfunction, the FAULT light
comes on amber and disappears when the EXTRACT
pushbutton switch is set to OVERRIDE.
FAULT: -Extract pressure low
-Computer power supply failure
-Smoke warning
OVRD: -The
system
goes
to
closed
circuit
configuration.
-Air from air conditioning system is added to
ventilation air.
SKIN AIR INLET VALVE
The skin air inlet valve position indication is
normally green and becomes amber in case of
disagreement or during transit.
The INLET indication is normally white. It becomes
amber in case of blower fan fault.
VENT INDICATION
The VENT indication is normally white. It becomes amber
in case of blower fan fault or extract fan fault.
VENT: Normal (white)
VENT: Blower or Extract fan fault (amber)
SKIN AIR OUTLET VALVE (EXTRACT VALVE)
The skin air outlet valve position indication is
normally green and becomes amber in case of
disagreement. The EXTRACT indication is normally
white. It becomes amber in case of extract fan fault.
Page 210
TMUVEN903-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 211
21 AIR CONDITIONING
TMUVEN903 LEVEL 1
UFD4200
01-04-2010
Page 212
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-26-00 AVIONICS VENTILATION SYSTEM WARNINGS
TMUVEN501 LEVEL 3
UFD4200
CONTENTS:
Blower Fault
Extract Fault
Skin Valve Fault
Avionics System Fault
Avionics Smoke
01-04-2010
Page 213
21 AIR CONDITIONING
TMUVEN501-T01 LEVEL 3
UFD4200
01-04-2010
Page 214
TMUVEN501-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 215
21 AIR CONDITIONING
TMUVEN501-T02 LEVEL 3
UFD4200
01-04-2010
Page 216
TMUVEN501-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 217
21 AIR CONDITIONING
TMUVEN501-T03 LEVEL 3
UFD4200
01-04-2010
Page 218
TMUVEN501-P03 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 219
21 AIR CONDITIONING
TMUVEN501-T04 LEVEL 3
UFD4200
01-04-2010
Page 220
TMUVEN501-P04 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 221
21 AIR CONDITIONING
TMUVEN501-T05 LEVEL 3
UFD4200
01-04-2010
Page 222
TMUVEN501-P05 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 223
21 AIR CONDITIONING
TMUVEN501 LEVEL 3
UFD4200
01-04-2010
Page 224
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-26-00 AVIONICS VENTILATION SYSTEM DESCRIPTION/OPERATION
TMUVEN603 LEVEL 3
UFD4200
CONTENTS:
General
Open Circuit Configuration
Closed Circuit Configuration
Partially Open Circuit Configuration
Self Examination
01-04-2010
Page 225
21 AIR CONDITIONING
TMUVEN603-T01 LEVEL 3
UFD4200
01-04-2010
Page 226
TMUVEN603-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 227
21 AIR CONDITIONING
TMUVEN603-T02 LEVEL 3
UFD4200
Note: the skin air inlet and outlet valves are fully
open.
01-04-2010
Page 228
TMUVEN603-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 229
21 AIR CONDITIONING
TMUVEN603-T03 LEVEL 3
UFD4200
01-04-2010
Page 230
TMUVEN603-P03 LEVEL 3
UFD4200
21 AIR CONDITIONING
01-04-2010
Page 231
21 AIR CONDITIONING
TMUVEN603-T04 LEVEL 3
UFD4200
01-04-2010
Page 232
TMUVEN603-P04 LEVEL 3
UFD4200
21 AIR CONDITIONING
01-04-2010
Page 233
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-26-00 AVIONICS VENTILATION SYSTEM INTERFACES
TMUVENB01 LEVEL 3
UFD4200
CONTENTS:
Landing Gear Control Interface Unit (LGCIU)
Engine Interface Unit (EIU)
Centralized Fault Display Interface Unit (CFDIU)
Skin Temperature Sensor
Blowing Pressure Switches And Duct Temperature Sensor
Extract Pressure Switch
Skin Air Valves/SDAC
Controller (AEVC)/SDAC
Smoke Detector
01-04-2010
Page 235
21 AIR CONDITIONING
TMUVENB01-T01 LEVEL 3
UFD4200
01-04-2010
Page 236
TMUVENB01-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 237
21 AIR CONDITIONING
TMUVENB01-T01 LEVEL 3
UFD4200
SMOKE DETECTOR
The smoke detector signals smoke to the controller,
to both SDACs, to both VENT pushbuttons and to GEN 1
LINE pushbutton.
Signal: Smoke detected, used for smoke warning.
01-04-2010
Page 238
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-26-00 AVIONICS VENTILATION COMPONENTS
TMUVENE0A LEVEL 3
UFD4200
CONTENTS:
Avionics Equipment Ventilation Computer (AEVC)
Skin Air Inlet Valve
Skin Air Outlet Valve
Blower Fan
Extract Fan
Skin Exchanger Inlet Bypass Valve
Skin Exchanger Isolation Valve
Skin Exchanger Outlet Bypass Valve
Conditioned Air Inlet Valve
Filter Assembly
Check Valves
Pressure Switches
Duct Temperature Sensor
Skin Temperature Sensor
Skin Heat Exchanger
01-04-2010
Page 239
21 AIR CONDITIONING
TMUVENE0A-T01 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The avionics computer controls the valves and fans in
the avionics ventilation system. System condition
information is sent to the avionics computer by
pressure switches and temperature sensors in the
system.
01-04-2010
Page 240
TMUVENE0A-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 241
21 AIR CONDITIONING
TMUVENE0A-T02 LEVEL 3
UFD4200
01-04-2010
Page 242
TMUVENE0A-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 243
21 AIR CONDITIONING
TMUVENE0A-T03 LEVEL 3
UFD4200
01-04-2010
Page 244
TMUVENE0A-P03 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 245
21 AIR CONDITIONING
BLOWER FAN
EXTRACT FAN
IDENTIFICATION
FIN: 20HQ
IDENTIFICATION
FIN: 18HQ
LOCATION
ZONE: 128
LOCATION
ZONE: 128
COMPONENT DESCRIPTION
The blower fan is powered with:
- a three phase, four pole single induction motor
for high speed,
- a three phase, six pole single induction motor
for low speed.
A thermo switch and relay are installed on the stator
of the blower fan. If the temperature of the stator
reaches +140 +6 -6 deg C (+284.00 +10.80 -10.80 deg.F),
the thermo switch isolates the electrical supply to
the fan. A fault indication light and reset button are
installed on the fan body.
COMPONENT DESCRIPTION
The extraction fan is identical to the blower fan.
TMUVENE0A-T04 LEVEL 3
UFD4200
01-04-2010
Page 246
TMUVENE0A-P04 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 247
21 AIR CONDITIONING
IDENTIFICATION
FIN: 16HQ
IDENTIFICATION
FIN: 23HQ
LOCATION
ZONE: 126
LOCATION
ZONE: 125
COMPONENT DESCRIPTION
This valve is of the butterfly type, with an actuator
which moves the butterfly to the open or closed
position. Two microswitches signal the valve position
to the avionics computer 10HQ. A visual position
indicator is located on the top of the actuator unit.
COMPONENT DESCRIPTION
The skin exchanger outlet bypass valve is installed
downstream of the skin heat exchanger. This valve is
identical to the skin exchanger inlet bypass valve
16HQ.
TMUVENE0A-T05 LEVEL 3
UFD4200
LOCATION
ZONE: 126
COMPONENT DESCRIPTION
The skin exchanger isolation valve 24HQ is installed
upstream of the skin heat exchanger. This valve is
identical to the skin exchanger inlet bypass valve
16HQ.
01-04-2010
Page 248
TMUVENE0A-P05 LEVEL 3
UFD4200
21 AIR CONDITIONING
AVIONICS VENTILATION - COMPONENTS - SKIN EXCHANGER INLET BYPASS VALVE - SKIN EXCHANGER
ISOLATION VALVE - SKIN EXCHANGER OUTLET BYPASS VALVE
01-04-2010
Page 249
21 AIR CONDITIONING
TMUVENE0A-T06 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The conditioned air inlet valve is installed in a duct
which is connected to the cockpit main supply duct.
This valve is similar to the skin exchanger inlet
bypass valve.
01-04-2010
Page 250
TMUVENE0A-P06 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 251
21 AIR CONDITIONING
TMUVENE0A-T07 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
A two-stage filter assembly is installed upstream of
the blower fan 20HQ. The first-stage is a cleanable
plate type filter 2081HM which removes dust particles
above 1000 microns and a multi-layer filter which
removes water particles. The second stage is a
cleanable, corrugated-cartridge-barrier filter 2082HM
which removes any dust particles above 400 microns.
The filter assembly is also equipped with pressure test
ports for checking the clogging level of the demister
and dust filter assembly (through a portable manometer).
01-04-2010
Page 252
TMUVENE0A-P07 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 253
21 AIR CONDITIONING
TMUVENE0A-T08 LEVEL 3
UFD4200
01-04-2010
Page 254
TMUVENE0A-P08 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 255
21 AIR CONDITIONING
TMUVENE0A-T09 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
Three pressure switches are installed in the avionics
ventilation system, two in the blowing circuit and one
in the extraction circuit. The switches are of the
capsule/microswitch type with an electrical connector
at the top. A low flow indication is given at a
differential pressure of 1.7 mbar plus 1.3 or minus
0.5 mbar.
01-04-2010
Page 256
TMUVENE0A-P09 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 257
21 AIR CONDITIONING
TMUVENE0A-T10 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
It consists of a thermistor mounted in a
stainless-steel tube, an electrical connector is
mounted at the top.
The set temperature values are:
- increasing temperatures 62 deg.C +1 deg.C
(143.6 deg.F +1.8 deg.F).
- decreasing temperatures 60 deg.C +1 deg.C (140 deg.F
+1.8 deg.F)
01-04-2010
Page 258
TMUVENE0A-P10 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 259
21 AIR CONDITIONING
IDENTIFICATION
FIN: 28HQ
COMPONENT DESCRIPTION
A skin heat exchanger is located in the upper fuselage
between frames 12 and 14 and, in normal flight
operations, is used to cool the avionics ventilation
air. A thermally insulated internal wall is bolted to
the frames to form two rectangular ducts. This internal
wall is easily removed for structural inspection. A
drainage system is included to deal with any
condensation when the heat exchanger is in operation.
LOCATION
ZONE: 126
TMUVENE0A-T11 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
It consists of a sensor element through which an
electrical current passes to measure the potential
difference proportional to the temperature. The set
temperature values are as follows:
- on ground, increasing values +7 deg.C (+44.60 deg.F),
decreasing values +4deg.C (+39.20 degF).
- after takeoff, increasing values +36 deg.C
(+96.80 deg.F), decreasing values +31 deg.C
(+87.80 deg.F).
01-04-2010
Page 260
TMUVENE0A-P11 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 261
21 AIR CONDITIONING
TMUVENE0A LEVEL 3
UFD4200
01-04-2010
Page 262
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-43-00 FWD CARGO COMPARTMENT
VENTILATION/HEATING SYSTEM PRESENTATION
TMUVE110A LEVEL 1
UFD4200
CONTENTS
General
Pressure Regulating Valve (PRV)
Trim Air Valve
Inlet Isolation Valve
Extraction Fan
Outlet Isolation Valve
Pressure Switch
Ventilation Controller
Heating Controller
01-04-2010
Page 263
21 AIR CONDITIONING
EXTRACTION FAN
TMUVE110A-T01 LEVEL 1
PRESSURE SWITCH
The trim air valve regulates the hot air flow. The hot
air is then mixed with the cabin ambient air to obtain
the desired temperature.
VENTILATION CONTROLLER
UFD4200
01-04-2010
Page 264
TMUVE110A-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 265
21 AIR CONDITIONING
TMUVE110A-T02 LEVEL 1
UFD4200
01-04-2010
Page 266
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-43-00 FWD CARGO COMPARTMENT
VENTILATION/HEATING
SYSTEM CONTROLS PRESENTATION
TMUVE1203 LEVEL 1
UFD4200
CONTENTS:
FWD Isol Valve Pushbutton
Temperature Selector
Hot Air Pushbutton
Self Examination
01-04-2010
Page 267
21 AIR CONDITIONING
TMUVE1203-T01 LEVEL 1
UFD4200
01-04-2010
Page 268
TMUVE1203-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 269
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-43-00 FWD CARGO COMPARTMENT
VENTILATION/HEATING ECAM PAGE PRESENTATION
TMUVE1305 LEVEL 1
UFD4200
CONTENTS:
General
Cargo Compartment Temperature
Zone Indication
Duct Inlet Temperature
Trim Air Valve
Inlet Isolation Valve
Outlet Isolation Valve
01-04-2010
Page 271
21 AIR CONDITIONING
TMUVE1305-T01 LEVEL 1
UFD4200
01-04-2010
Page 272
TMUVE1305-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 273
21 AIR CONDITIONING
TMUVE1305 LEVEL 1
UFD4200
01-04-2010
Page 274
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-28-00 FWD CARGO COMPARTMENT
VENTILATION/HEATING SYSTEM WARNINGS
Isolation Valve Fault
Duct Overheat
Heating Fault
Ventilation Fault
TMUVE1405 LEVEL 3
UFD4200
CONTENTS:
FWD Cargo
FWD Cargo
FWD Cargo
FWD Cargo
01-04-2010
Page 275
TMUVE1405-T01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 276
21 AIR CONDITIONING
TMUVENL0A LEVEL 3
UFD4200
CONTENTS:
Cargo Ventilation Controller
Heating Controller
Isolation Valves
Extraction Fan
Pressure Switch
Trim Air Valve
Temperature Sensors
01-04-2010
Page 277
21 AIR CONDITIONING
TMUVENL0A-T01 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
It is a modular construction and consists of:
- AFT cargo ventilation module,
- AFT cargo power relay,
- FWD cargo ventilation module,
- FWD cargo power relay,
- common power supply module,
- spare module connector,
- spare power relay socket.
01-04-2010
Page 278
TMUVENL0A-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 279
21 AIR CONDITIONING
TMUVENL0A-T02 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The heating controller consists of a MCU box installed
in the avionics compartment, in rack 95 VU.
Power up test:
- computer internal tests,
- check of sensor,
- check for Trim Air Valve closure,
- check for HOT AIR Pressure Regulating Valve
closure.
Test duration: 40 seconds.
01-04-2010
Page 280
TMUVENL0A-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 281
21 AIR CONDITIONING
TMUVENL0A-T03 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The electrically operated butterfly valves consist of:
- a 28 VDC motor which drives a gear train,
- two microswitches (signal fully open/fully
closed position of isolation valves to the
ventilation controller),
- a manual override and visual position
indicator.
01-04-2010
Page 282
TMUVENL0A-P03 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 283
21 AIR CONDITIONING
TMUVENL0A-T04 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The extraction FAN is:
- powered by a 3 phase 4 pole induction motor,
the fan runs at about 11700 rpm,
- thermal switches isolate the electrical supply
in case of stator temperature of 140C (284F),
- a relay signals malfunction to the ECAM and
to the CFDS via the ventilation controller.
01-04-2010
Page 284
TMUVENL0A-P04 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 285
21 AIR CONDITIONING
TMUVENL0A-T05 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The pressure switch consists of a body with two
pressure ports, a diaphgrapm, a spring, a microswitch
and an electrical connector.
When the P reaches 1 psi, the spring snaps over and
depresses the microswitch actuator. A signal is sent
to the cargo ventilation controller which stops the
extract fan. When the pressure decreases, the
microswitch returns to original position, this removes
the pressure signal and the extract fan starts.
01-04-2010
Page 286
TMUVENL0A-P05 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 287
21 AIR CONDITIONING
TMUVENL0A-T06 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
- a stepper motor drives the shaft of the
butterfly,
- limit switches stop the valve (mechanical stops
are as back up),
- a manual override and visual position
indicator,
- a return spring closes the trim air valve
if power supply is lost or if the
controller does not operate.
01-04-2010
Page 288
TMUVENL0A-P06 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 289
21 AIR CONDITIONING
TMUVENL0A-T07 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The two temperature sensors are used for temperature
control, indication and overheat detection.
01-04-2010
Page 290
TMUVENL0A-P07 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 291
21 AIR CONDITIONING
TMUVENL0A LEVEL 3
UFD4200
01-04-2010
Page 292
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-43-00 AFT CARGO COMPARTMENT
VENTILATION/HEATING SYSTEM PRESENTATION
TMUVE170A LEVEL 1
UFD4200
CONTENTS:
Pressure Regulating Valve (PRV)
Trim Air Valve
Inlet Isolation Valve
Extraction Fan
Outlet Isolation Valve
Ventilation Controller
Heating Controller
01-04-2010
Page 293
21 AIR CONDITIONING
VENTILATION CONTROLLER
duct and
Pressure
regulates
pressure)
TMUVE170A-T01 LEVEL 1
UFD4200
01-04-2010
Page 294
TMUVE170A-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 295
21 AIR CONDITIONING
TMUVE170A LEVEL 1
UFD4200
01-04-2010
Page 296
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-43-00 AFT CARGO COMPARTMENT
VENTILATION/HEATING SYSTEM CONTROLS PRESENTATION
TMUVE1803 LEVEL 1
UFD4200
CONTENTS:
Aft Isol Valve Pushbutton
Temperature Selector
Hot Air Pushbutton
Self Examination
01-04-2010
Page 297
21 AIR CONDITIONING
TMUVE1803-T01 LEVEL 1
UFD4200
01-04-2010
Page 298
TMUVE1803-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 299
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-43-00 AFT CARGO COMPARTMENT
VENTILATION/HEATING ECAM PAGE PRESENTATION
TMUVE1906 LEVEL 1
UFD4200
CONTENTS:
General
Cargo Compartment Temperature
Zone Indication
Duct Inlet Temperature
Trim Air Valve
Pressure Regulating Valve
Inlet Isolation Valve
Outlet Isolation Valve
01-04-2010
Page 301
21 AIR CONDITIONING
ZONE INDICATION
The zone indication is displayed in white.
DUCT INLET TEMPERATURE
The duct inlet temperature indication is normally green
and given by the duct temperature sensor.
Indication becomes amber if the duct inlet
temperature is at 80oC (176oF) or more.
TRIM AIR VALVE
TMUVE1906-T01 LEVEL 1
UFD4200
01-04-2010
Page 302
TMUVE1906-P01 LEVEL 1
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 303
21 AIR CONDITIONING
TMUVE1906 LEVEL 1
UFD4200
01-04-2010
Page 304
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-43-00 AFT CARGO COMPARTMENT
VENTILATION/HEATING SYSTEM WARNINGS
Isolation Valve Fault
Duct Overheat
Heating Fault
Ventilation Fault
TMUVE2006 LEVEL 3
UFD4200
CONTENTS:
Aft Cargo
Aft Cargo
Aft Cargo
Aft Cargo
01-04-2010
Page 305
TMUVE2006-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 306
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-28-00 AFT CARGO COMPARTMENT
VENTILATION/HEATING COMPONENTS
TMUVENP0A LEVEL 3
UFD4200
CONTENTS:
Ventilation Controller
Heating Controller
Isolation Valves
Extraction Fan
Pressure Regulating Valve
Trim Air Valve
Temperature Sensors
01-04-2010
Page 307
21 AIR CONDITIONING
TMUVENP0A-T01 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
It is a modular construction and consists of:
- AFT cargo ventilation module,
- AFT cargo power relay,
- FWD cargo ventilation module,
- FWD cargo power relay,
- common power supply module,
- spare module connector,
- spare power relay socket.
01-04-2010
Page 308
TMUVENP0A-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 309
21 AIR CONDITIONING
TMUVENP0A-T02 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The heating controller consists of an MCU box installed
in the avionics compartment, in rack 96 VU.
Power up test:
- computer internal tests,
- check of sensor,
- check for Trim Air Valve closure,
- check for aft Trim Air Pressure Regulating
Valve closure.
Test duration: 40 seconds.
01-04-2010
Page 310
TMUVENP0A-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 311
21 AIR CONDITIONING
TMUVENP0A-T03 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
Electrically operated butterfly valves consist of:
- a 28 VDC motor which drives a gear train,
- two microswitches (signal fully open/fully
closed position of isolation valves to the
ventilation controller),
- a manual override and visual position
indicator.
01-04-2010
Page 312
TMUVENP0A-P03 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 313
21 AIR CONDITIONING
TMUVENP0A-T04 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
The extraction FAN is:
- powered by a 3 phase 4 pole induction motor,
the fan runs at about 11400 rpm,
- thermal switches isolate the electrical supply
in case of stator temperature of 123C (254F),
- a relay signals malfunction to the ECAM and
to the CFDS via the ventilation controller.
01-04-2010
Page 314
TMUVENP0A-P04 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 315
21 AIR CONDITIONING
TMUVENP0A-T05 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
Electrically controlled and pneumatically actuated.
Consists of:
- a valve body assembly,
- a regulator servo valve,
- an actuator assembly,
- a solenoid valve assembly,
- an actuator body assembly,
- an indicator assembly,
- a manual override and visual position
indicator,
- a locking mechanism.
01-04-2010
Page 316
TMUVENP0A-P05 LEVEL 3
UFD4200
21 AIR CONDITIONING
01-04-2010
Page 317
21 AIR CONDITIONING
TMUVENP0A-T06 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
- a stepper motor drives the shaft of the
butterfly,
- limit switches stop the valve (mechanical stops
are as backup),
- a manual override and visual position
indicator,
- a return spring closes the trim air valve
if power supply is lost or if the
controller does not operate.
01-04-2010
Page 318
TMUVENP0A-P06 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 319
21 AIR CONDITIONING
TMUVENP0A-T07 LEVEL 3
UFD4200
COMPONENT DESCRIPTION
used for temperature control, indication and overheat
detection.
01-04-2010
Page 320
TMUVENP0A-P07 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 321
21 AIR CONDITIONING
TMUVENP0A LEVEL 3
UFD4200
01-04-2010
Page 322
21 AIR CONDITIONING
21 - AIR CONDITIONING
21-00-00 CFDS SPECIFIC PAGE PRESENTATION
TMUTEMY01 LEVEL 3
UFD4200
CONTENTS:
CPC 1
Last Leg Report
Previous Legs Report
Class 3 Faults
TEMP CTL
Last Leg Report
Previous Legs Report
GND Report
FWD CHC & AFT CHC
Last Leg Class 3 Faults
Ground Report
01-04-2010
Page 323
21 AIR CONDITIONING
CLASS 3 FAULTS
TMUTEMY01-T01 LEVEL 3
UFD4200
01-04-2010
Page 324
TMUTEMY01-P01 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 325
21 AIR CONDITIONING
TMUTEMY01-T02 LEVEL 3
UFD4200
01-04-2010
Page 326
TMUTEMY01-P02 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 327
21 AIR CONDITIONING
TMUTEMY01-T03 LEVEL 3
UFD4200
01-04-2010
Page 328
TMUTEMY01-P03 LEVEL 3
UFD4200
01-04-2010
21 AIR CONDITIONING
Page 329
21 AIR CONDITIONING
TMUTEMY01 LEVEL 3
UFD4200
01-04-2010
Page 330