Professional Documents
Culture Documents
X (3G) (Micro) 80010711 PDF
X (3G) (Micro) 80010711 PDF
X (3G) (Micro) 80010711 PDF
Dual Polarization
Half-power Beam Width
1710 2690
X
65
80010711
Type No.
1710 2690
1920 2200 MHz 2200 2490 MHz
+45, 45
+45, 45
9.2 dBi
9.6 dBi
Frequency range
1710 1990 MHz
Polarization
+45, 45
Gain
8.7 dBi
Horizontal Pattern:
Half-power beam width
Approx. 67
Front-to-back ratio, copolar
> 24 dB
(18030)
Cross polar ratio
0 Typically: 20 dB
Cross polar ratio
> 10 dB
sector corner
60
Vertical Pattern:
Half-power beam width
Approx. 66
Impedance
VSWR
Isolation, between ports
Intermodulation IM3
Max. power per input
Approx. 62
> 24 dB
Approx. 55
> 22 dB
Approx. 53
> 22 dB
Typically: 20 dB
> 9 dB
Typically: 24 dB
> 8 dB
Typically: 24 dB
> 8 dB
Approx. 60
Approx. 55
Approx. 53
50
< 1.5
> 27 dB
< 150 dBc (2 x 43 dBm carrier)
150 W (at 50 C ambient temperature)
125
65
Horizontal Pattern
7-16
7-16
Mechanical specifications
Vertical Pattern
Input
Connector position*
Wind load
110
54
54
3
0
Horizontal Pattern
dB
10
10
dB
Subject to alteration.
936.4462/a
17102690
+45$
dB
dB
www.kathrein.de
17102690
45$
10
10
3
63
Vertical Pattern
2 x 7-16 female
Bottom or top
Frontal:
50 N (at 150 km/h)
Lateral:
13 N (at 150 km/h)
Rearside:
55 N (at 150 km/h)
200 km/h
155 / 155 / 69 mm
L (Light)
1.5 kg (tension bands incl.)
257 x 172 x 92 mm
Panel and 1 unit of tension bands
for 45 125 mm diameter
* Inverted mounting:
Connector position top: Chainge drain hole screw
80010711 Page 1 of 2
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-973
Accessories
General Information
Accessories
Type No.
Description
Remarks
Weight
approx.
155
205
235
734365
8.5
35
64
54
Material:
Grounding:
69
+45$
155
Bottom view
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
Please note:
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or
even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must
be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 2 80010711
www.kathrein.de
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-973
936.4462/a
Environmental tests:
Subject to alteration.
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.