Professional Documents
Culture Documents
Basics Compressor Calculation
Basics Compressor Calculation
Sven-Olaf Zillmann
Project Manager Sales
Head of Team Pipeline
Process Industry
Sven-Olaf Zillmann
nopq
18.11.2013
<
>
Sven-Olaf Zillmann
nopq
18.11.2013
<
>
Sven-Olaf Zillmann
nopq
18.11.2013
<
>
Sven-Olaf Zillmann
nopq
18.11.2013
<
>
h = R * z1 * T1 * n / (n 1) * [(p2/p1)(n-1)/n - 1 ]
h = polytrophic head
[ kJ / kg ]
[bar a]
nopq
18.11.2013
<
>
P=m*h/
P = gas power
[kW]
Sven-Olaf Zillmann
nopq
18.11.2013
<
>
Nimp = h / (y * u22)
Nimp = Number of impeller
h = Head needed at design point [ J/kg ]
y = head coefficient,
typical value 0.48 to 0.54
u2 = peripheral speed
[ m/s ]
Sven-Olaf Zillmann
nopq
18.11.2013
<
>
Sven-Olaf Zillmann
nopq
18.11.2013
<
>
Sven-Olaf Zillmann
nopq
18.11.2013
<
>
The torsional analysis must be done to ensure the stability of the whole train.
This includes the compressor, gear (if necessary) and the driver. Especially if a
VFD motor is the driver of the train. A VFD creates an excitation by running in
part load. This is typically for an VFD.
Sven-Olaf Zillmann
nopq
18.11.2013
<
10
>
Disclaimer
All data provided in this document is non-binding.
This data serves informational purposes only and is especially
not guaranteed in any way. Depending on the subsequent
specific individual projects, the relevant data may be subject
to changes and will be assessed and determined individually
for each project. This will depend on the particular
characteristics of each individual project, especially specific
site and operational conditions.
Sven-Olaf Zillmann
nopq
18.11.2013
<
11
>
Sven-Olaf Zillmann
[olaf.zillmann@man.eu]
Benjamin Omlor
[benjamin.omlor@man.eu]
Sven-Olaf Zillmann
nopq
18.11.2013
<
12
>