Rotating Element Sootblower
] The Rotating Element Saotblower DB is designed to
clean convection surfaces as well as heat exchangers
win slight fouling and flue gas temperatures < 500 °C.
‘The blowing elementorinis type sootblower remains in
the boiler atalltimes, supported by element bearings,
usually attached to the boiler tubes.
‘Specially designed nazzles are located on the element
(as requires) for each spectic installation. Saturated or
‘Supemeated steam, as well as compressed a, may be
Used as the blowing medium,
Principle of cleaning
‘+ The blowing tube is equipped with nozzles over the whole
length and rotates into the flue gas path
+ During tne blowing process ine blowing tube pertorms 3
‘otaional movement
+ Aspecial control ofthe valve also enables cleaning of specific
segments,
+ The blowing process ends when the necessary number of
rotations has been performed
«Blowing tube remans in fue gas path
Features
+ Temperature-resistantblowing tube material, high-performance nozzle and stainless feed tube
‘material
‘+ Compact box section for resticted spaces encloses all moving parts for personnel protectan
+ Integrated poppet isolating valve with adjustable throttle disc for adjustment of blowing pressure
+ Tallorod to suit the sito/regional specific hazarcous area conditions - including: ATEX, CENELEC,
IEC, NEC, GOST, CCOE, and NEPA
+ Cantilever support design - eliminating need for rear support requirements
Benetits
«The DB productis the global industry standard s tested and proven in the most severe operating
conditions around the world
«The blower can be configured to provide a blowing arc of between 20 and 360". Typically, the
blowers ftatec one tb sx times per operational cycle